In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
3500.00
Buy It Now
Condition: Used
Location: Fleetwood, United States
• Local pick up. We think good. When we receive the product we will confirm item is. Let us know what’s going on. are more than happy to rectify any problems ... moreby replacing. received in a different condition than stated (DOA, not. ).
$
750.00
Buy It Now
$75.00 Shipping
Condition: Used
Location: Brewster, United States
I have had this plasma cutter for about 5 years. It slices through everything very easily. I have personally severed 3/4" plate and its spec sheet ... morecalls for 7/8" as well. There is a handful of consumables that come with it. And a brand new never used fine cut kit that allows for an extremely small kerf on steel up to 11ga(about 1/8" I believe) Would prefer a local pickup and am willing to drive some if negotiated prior to auction end. Shipping is an estimate only and I will ship by actual cost via FedEx.
$
2000.00
10h 18m 4s
11 bids
Free Shipping
Condition: New
Location: Huron, United States
$
1000.00
Buy It Now
$162.16 Shipping
Condition: Used
Location: Fairchild, United States
Used hypertherm powemax 900 55 AMP plasma cutter. Just had it gone through and confirmed working from service technician local to me. It's rated for 7/8" ... morecutting and has a severance of 1-1/8". Currently wired for 240 single phase but could be used on 3 phase. Comes with 25 foot torch and 20 foot ground cable Sold as is No warranty
$
2500.00
Buy It Now
$79.35 Shipping
Condition: New – Open box
Location: Harvey, United States
This Hypertherm Plasma Cutter Powermax 1650 Serie 3 is a must-have for anyone working in the welding and soldering industry. With its advanced technology ... moreand high-quality build, this plasma cutter is perfect for cutting through a wide range of materials quickly and efficiently.
$
1850.00
1d 17h 36m 50s
0 bids
$95.25 Shipping
Condition: Used
Location: Utica, United States
Whether you're a professional welder or just starting out, this plasma cutter will help you get the job done quickly and efficiently.
$
38.90
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
KEMAO 20Pcs 220842 Plasma Cutter Nozzle Fit PMX 45XP/65/85/105. Powermax 30AIR. Powermax 30XP. Powermax 30. Powermax 45. Powermax 45XP/65/85/105. Powermax ... more125. Powermax 1000/1250/1650.
$
2395.00
Buy It Now
$200.00 Shipping
Condition: Used
Location: Atlanta, United States
hypertherm plasma cutter powermax 1250 G3 series YOU ARE BIDDING ON A hypertherm powermax 1250 IN GREAT WORKING CONDITIONS it comes as shown in the pictures. ... morePLEASE CHECKS PICTURES! Winner pay for shipping and handle $85.00 just to the lower 48 states.USA) if you are located in ALASKA, HAWAII, CANADA OR PUERTO RICO please contact me for a shipping cost. thanks and good luck. WHAT YOU SEE ITS WHAT YOU GET! THANKS FOR LOOKING GOOD LUCK SE HABLA ESPAÑOL Hypertherm® Powermax 1250® G3 Series™ Plasma Machine With Hand Torch and 25' Leads, 200-600 Volt. 1/3 Phase, 50/60 Hz PART NUMBER: HYP087008 Overview Accessories& Related Products The Powermax1250 is the first of the Powermax G3 Series. With new technologies in both power supply and torch. It cuts faster and more economically than any system available today. In fact, it cuts 80% faster on 1-inch(25 mm) mild steel than any competitor tested. Its Auto-voltage™ circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 1- or 3-phase. A state-of-the-art, microprocessor-based architecture assures optimum system reliability. Add to this Hypertherm's advanced torch technology and easy-to-read controls, and you have the most advanced plasma cutter money can buy. Features: Auto-voltage™ automatically adapts to any incoming power from 200 V– 600 V. 1- or 3-phase. Coaxial-assist™ jet technology delivers fast cut speeds. Boost Conditioner™ compensates for input voltage variations. Providing improved performance on low-line voltage, on motor generators and on fluctuating input power. Reliability-focused design improves uptime and maximizes return on investment. CNC interface and Easy Torch Removal(ETR™) provide increased versatility for handheld and mechanized usage. Specification: The Powermax 1250 is backed by a full three-year power supply warranty and a one-year torch warranty. Includes: Power Supply T80 Torch with 25' leads Spare Consumables Work Cable and Clamp 15' 4.6 mm) Application: Cutting, Gouging, Specs: Input
$
2875.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe, United States
Hypertherm Powermax 45 XP Plasma Cutter Includes Hypertherm Powermax 45 XP - Easy to use. Smart Sense technology ensures that air pressure is always correctly ... moresetHypertherm Powermax 45 XP - Outstanding versatility.
$
2625.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe, United States
Hypertherm Powermax 45 XP Plasma Cutter 20' Hand System 088112. Hypertherm Powermax 45 XP Plasma Cutter Includes Hypertherm Powermax 45 XP - Easy to use. ... moreSmart Sense technology ensures that air pressure is always correctly setHypertherm Powermax 45 XP - Outstanding versatility.
$
1400.00
1d 7h 30m 17s
1 bids
$140.88 Shipping
Condition: Used
Location: Rathdrum, United States
Powermax45 plasma cutter with torch head and misc. tips. Perfect for small to mid range CNC plasma cutters.
$
500.00
Buy It Now
$194.51 Shipping
Condition: Used
Location: Vineland, United States
Description: BRAND: HYPERTHERM MODEL: POWERMAX 190C COMES WITH THE: UNIT AND EVERYTHING SEEN IN THE PICTURES ONLY In GOOD condition. Works great. Item ... moreshows normal wear with some scuffs and scratches. Comes as seen in pictures, so don't miss out on this great deal. REF:S TRX: B1689 EMAILS ARE ANSWERED THROUGH EBAY MESSAGE SYSTEM ONLY(We do not answer emails on Sunday’s) No International shipments Shipping: Our packing department pack items Mondays and Wednesdays and packages are sent out the following day. If payment is received after 10:30am PST on those days your item will be packed on the following packing day and sent out the following day. All larger items are sent out through FedEx Ground. No exceptions. All small items are sent out through U.S.P.S. Mail. All Video tapes, books, records, CDs, DVDs and magazines are sent out U.S.P.S. Media Mail. Please Contact us through via eBay message system for Hawaii. Alaska, and Porto Rico Shipping quotes. Domestic Shipping and Handling charges are stated on auction page. We will not ship to APO addresses. Free Shipping" only applies to the continental USA Back To Top Warranty: All items come as stated in description and shown in picture(s) No Exceptions. Please read description carefully and see picture(s) Because that is what will be included in your auction. Ask all questions before bidding. Please do not assume an item is included with your auction if it is not listed in description or shown in picture(s) The items cosmetic and working condition is stated in description above. All Sales are FINAL. NO REFUNDS. Computers and Laptops: Any computers or laptops that are sold from us. Do not include an Operating System or any software. It is up to the buyer to provide an OS or software they might want on the computer or laptop. We sell used items so if an OS was previously installed. We consider that unwarranted. We do not know the history or legitimacy of any software or operating systems that might be on the computer or laptop. Any OS or software that is loade
$
51.00
14h 1m 24s
6 bids
$15.14 Shipping
Condition: Used
Location: Columbus, United States
Click to Enlarge Click to Enlarge Just one of inkFrog's Creations Description Hypertherm Deluxe Plasma Circle Cutting Guide 027668 Brand new in box ... moreHypertherm Deluxe Plasma Circle Cutting Guide 027668. Facilitates consistent and accurate measured circles in work pieces. Also used as a stand-off guide and in beveling applications. You can use the Hypertherm basic plasma cutting guide to create high-quality straight cuts. Bevel cuts, and circle cuts between 2 in. and 22 in. in diameter. Comes with case, magnet and suction cups. You can call today at 1-800-783-8833 for technical questions or immediate shipment. Check out our eBay Store for more welding related items. Payment and Shipping This item will ship to the lower 48 states for FREE. Any other location please for a quote. We accept all forms of payment including credit cards and PayPal. International customers please contact us before ordering. We do not accept international Paypal payments. Feel free to call our office direct at 1-800-783-8833 to use your credit card and speak with a live person Monday through Friday 8AM to 5PM EST. to see my other auctions on related welding supplies. view my other auctions below: visit my entire auction Powered by The free listing tool. List your items fast and easy and manage your active items.
$
299.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
NOT A HYPERTHERM TORCH Torch uses many STANDARD Hypertherm Parts for an AMAZING CUT. X45 - 70A Plasma Hand Torch.
$
5250.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe, United States
Powermax 85 Sync Power Source. Hypertherm Kit: SmartSYNC Ohmic Rings 428895. The Powermax85 SYNC™ is a next-generation professional grade air plasma system ... morethat dramatically simplifies system operation for cutting and gouging up to 25 mm (1?).
$
300.00
6d 0h 41m 35s
0 bids
$680.00 Now
$29.10 Shipping
Condition: New – Open box
Location: San Antonio, United States
Hypertherm Part # 059464Duramax robotic torch, 45°, 7.6 m (25') lead.Torch Type: Robotic TorchBrand New just been sitting on a shelf .
$
1500.00
Buy It Now
$82.30 Shipping
Condition: Used
Location: Gallatin, United States
HYPERTHERM POWERMAX 380 PLASMA CUTTER Item is used In Great Working Condition, Comes with everything shown in pictures. PLEASE NOTE: This is a used item ... moreand is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concearns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
$
395.00
Buy It Now
$12.08 Shipping
Condition: New – Open box
Location: Duluth, United States
Duramax 75 degree hand torch with 25 foot lead. Hypertherm 059473 75 deg Hand Torch Assembly with 25' lead is compatible with Powermax 65, 85 and 105 ... moremodels. Also compatible with the Powermax 45 older version if you want to use Duramax consumables.
$
3000.00
Buy It Now
$93.17 Shipping
Condition: Used
Location: Edmond, United States
5pk Hypertherm Plasma Electrodes These are NEW in original snap-pack. Electrodes from Hypertherm Genuine. Never used or damaged. Made in the USA on 2/04/2013. ... moreSpecifications& Features: Part Type: Electrodes Amperage: 100 Amps Processes: Shielded Unshielded Gouging Torch Type: Handheld or Mechanized PAYMENT& SHIPPING- All bids must be paid within 10 days from the closing of the auction. If the buyer has not paid by that time, and contact has not been made, we will file an unpaid item case. Winning bidder agrees to pay amount listed(USD) to cover shipping and handling. We will ship your item(s) after your payment has been cleared, to a confirmed address. If an item arrives damaged from shipping. Keep everything sent to you, and contact us within 14 days after receiving item and we'll fix it. FEEDBACK& QUESTIONS- We will submit feedback only on those who have filed feedback on us. If you are satisfied with your transaction with us. Please leave your comment and we will be sure to reciprocate, promptly. Please contact us with any questions or concerns before leaving neutral or negative feedback, we will ensure complete customer satisfaction. ` For questions. Alternate payment or shipping methods. Call: 620.757.1333, Tue-Sat: 12PM to 8PM CST-
$
1900.00
3d 6h 14m 52s
0 bids
$31.18 Shipping
Condition: New – Open box
Location: Pequannock, United States
Hypertherm Powermax 45XP. Purchased for a specific project, turned on and tried for a few minutes, then I bought a Haas Vertical Mill instead. Everything ... moreis as new in the original box.Shipping inside the contiguous USA is included above $2,000.
$
450.00
Buy It Now
Free Shipping
Condition: Used
Location: Brewster, United States
Description: BRAND: HYPERTHERM MODEL: POWERMAX 190C COMES WITH THE: UNIT AND EVERYTHING SEEN IN THE PICTURES ONLY In GOOD condition. Works great. Item ... moreshows normal wear with some scuffs and scratches. Comes as seen in pictures, so don't miss out on this great deal. REF:S TRX: B1689 EMAILS ARE ANSWERED THROUGH EBAY MESSAGE SYSTEM ONLY(We do not answer emails on Sunday’s) No International shipments Shipping: Our packing department pack items Mondays and Wednesdays and packages are sent out the following day. If payment is received after 10:30am PST on those days your item will be packed on the following packing day and sent out the following day. All larger items are sent out through FedEx Ground. No exceptions. All small items are sent out through U.S.P.S. Mail. All Video tapes, books, records, CDs, DVDs and magazines are sent out U.S.P.S. Media Mail. Please Contact us through via eBay message system for Hawaii. Alaska, and Porto Rico Shipping quotes. Domestic Shipping and Handling charges are stated on auction page. We will not ship to APO addresses. Free Shipping" only applies to the continental USA Back To Top Warranty: All items come as stated in description and shown in picture(s) No Exceptions. Please read description carefully and see picture(s) Because that is what will be included in your auction. Ask all questions before bidding. Please do not assume an item is included with your auction if it is not listed in description or shown in picture(s) The items cosmetic and working condition is stated in description above. All Sales are FINAL. NO REFUNDS. Computers and Laptops: Any computers or laptops that are sold from us. Do not include an Operating System or any software. It is up to the buyer to provide an OS or software they might want on the computer or laptop. We sell used items so if an OS was previously installed. We consider that unwarranted. We do not know the history or legitimacy of any software or operating systems that might be on the computer or laptop. Any OS or software that is loade
$
18.00
Buy It Now
Free Shipping
Condition: New
Location: China
$
1750.00
Buy It Now
Condition: Used
Location: Brookpark, United States
HYPERTHERM #POWERMAX 1250 PLASMA CUTTER. -- WGT: 95LBS. -- 200-480V, 3PHASE.
$
25.00
Buy It Now
$4.13 Shipping
Condition: New
Location: San Diego, United States
With an input amperage of 10/105A, the electrodes are perfect for use with the Plasma Cutter and can be used for a range of cutting and welding tasks.
$
699.00
Buy It Now
$169.88 Shipping
Condition: Used
Location: Alameda, United States
$
2950.00
Buy It Now
$235.00 Shipping
Condition: Used
Location: Apache Junction, United States
100 big boy barely used on special jobs.
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
Fits Hypertherm Powermax 600 - PAC123 Torch. Experts in Plasma Cutting and Welding for over 10 Years.
$
550.00
Buy It Now
$19.51 Shipping
Condition: Used
Location: Whiting, United States
This is a" NEW" Hypertherm Duramax 65 torch taken from a new unit that I sold. Take a look at prices and make an offer or I also have a BUY ... moreIT NOW. Anyone that uses BUY IT NOW will get free shipping. Please take time to look at my other sales. Thanks for looking lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-141480fb4bb-0xff-
$
649.99
Buy It Now
Free Shipping
Condition: New
Location: Claremore, United States
HYPERTHERM 220706 HPR400XD TORCH BODY QUICK DISCONNECT NEW IN BOX! PACKAGE WAS SEALED UNTIL PICTURES WERE TAKEN. ALLOWS OPERATOR TO PRELOAD DIFFERENT ... moreTIP CONFIGURATIONS TO SPEED UP PROCESS. Feel free to contact me with any questions. On Feb-10-13 at 16:29:04 PST. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
$
2775.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe, United States
Hypertherm Powermax 45 XP Plasma Cutter Includes Hypertherm Powermax 45 XP - Easy to use. Smart Sense technology ensures that air pressure is always correctly ... moresetHypertherm Powermax 45 XP - Outstanding versatility.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
Fits many plasma cutters including Hypertherm POWERMAX 350, 380, Max20, Solar 20-20, Century 20-20 and many others. Experts in Plasma Cutting Parts, Service ... more& Repair for over 10 Years. i.e. select 10 x Nozzles + Electrodes get10pcs TOTAL.
$
666.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
(For Powermax 45XP 65 85 HRT HRTs. Part Number: 220818. 4) Ordered by Mistake. 3) Just Didn't Like it. 2) Found a Better Price. 1) Changed My Mind. ● ... moreSelect from the following 5 reasons.
$
1599.99
Buy It Now
$112.78 Shipping
Condition: Used
Location: Middlebury, United States
Model: Powermax 600. Prefer to pick it up yourself?. implied or. Will there be a dock or forklift. LOCAL PICK-UP. 25' Torch Hose. 6' Power Cord No Plug. ... moreTo get a freight quote we will need to know the following.
$
405.00
7d 18h 0m 3s
3 bids
$4900.00 Now
Condition: Used
Location: Greenwood, United States
Production cut speeds are the result of Hypertherm's laboratory testing. Duty cycle @ 40°C (104°F)CSA 60% @ 85 A, 230 – 600 V, 3-PH. 60% @ 85 A, 480 V, ... more1-PH. Output current25 - 85 A. 40% @ 85 A, 200 – 208 V, 1-PH.
$
15.18
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Powermax 30AIR. Powermax 30XP. Powermax 30. Powermax 45. Powermax 45XP/65/85/105. Powermax 125. Powermax 1000/1250/1650. Plasma consumables.
$
699.99
Buy It Now
$69.95 Shipping
Condition: Used
Location: Cross Plains, United States
HYPERTHERM POWERMAX 380 PLASMA CUTTER Item is used In Great Working Condition, Comes with everything shown in pictures. PLEASE NOTE: This is a used item ... moreand is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concearns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
$
10.00
2d 6h 18m 8s
0 bids
$14.50 Shipping
Condition: New
Location: Lansing, United States
Item Description New Lot Of 5 Hypertherm 220356 HRP 200Amp Shield About Us Our Store We deal in store close outs. Lost freight and over runs. 99% of our ... moreinventory is new and unused. Some things may have cosmetic damage or the packaging may be damaged. We try our best to be upfront with everything because the best customer service is our#1 goal! Be sure and look through our store and come back often because inventory is always changing! Shipping Returns We have 1-2 day handling on all items purchased before 11 am EST. We use FedEx and USPS for shipping. If a tracking number is available. It will be sent to you. Freight shipments take longer to process due to having to palatalize the item for safe shipment and setting up a pickup. Freight will have between a 1-4 day handling time before shipment. Returns are excepted on any item that is defective. Please email us through eBay to correct any problem. If you ordered something by mistake and want to return it. You will be responsible for shipping costs, 15% restocking fee and the item must be in unused condition.
$
24500.00
Buy It Now
Condition: Used
Location: Salem, United States
Hypertherm HPR260. Multicam 6000 Series Plasma Cutter. 8’ X 20’ Table. Drive System (X, Y Axes). Drive System (Z Axis). X Axis Travel. Rapid Traverse ... moreRate. +/-. 0001".
$
2000.00
Buy It Now
$147.30 Shipping
Condition: Used
Location: San Diego, United States
Hypertherm HyPerformance Plasma Gas Console No. 078170 Serial no. HPRC 500836& HPRC 501409 These gas consoles are used but came off working systems ... morethat were upgraded. Both are in very good condition. If you have any questions or concerns feel free to call 414-264-5848 ask for Joe. Posted with
$
369.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
This is NOT A HYPERTHERM TORCH Torch uses many STANDARD Hypertherm Parts for an AMAZING CUT. Uses Hypertherm Duramax Consumables. X125 - Plasma Torch. ... moreFits Titanium 65 TI-PC65 Plasma Cutter.
$
13.50
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
$
175.00
Buy It Now
$45.10 Shipping
Condition: Used
Location: Newark, United States
1 hypertherm tool kit / consumables selection in hypertherm box. Hypertherm 1100 plasma cutter 100amp hand torch. Along with a good selection of new consumables( ... moreyellow trays not included).
$
27.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
Here are the key details Vivid Color: The color of these nozzles matches the pictures shown, providing a vibrant and consistent look.
$
399.99
Buy It Now
Free Shipping
Condition: Used
Location: Claremore, United States
USED Hypertherm 220706 HPR QUICK DISCONNECT TORCH
$
52.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
20pcs X 220842 Electrode 20pcs X 220941 nozzle tip. Suitable for all Thermal Dynamics Cutmaster series plasma cutters. Consumables type: Plasma Drag Tip ... morePlasma Cutting Current: 45A 65A 85A Material:copper.
$
649.44
Buy It Now
Condition: Used
Location: Wingfield, Australia
Powermax45 plasma system 3m cable without torch.
$
27.90
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
KEMAO 40Pcs 220819 Plasma Cutter Nozzle Fit PMX 45XP/65/85/105. Powermax 30AIR. Powermax 30XP. Powermax 30. Powermax 45. Powermax 45XP/65/85/105. Powermax ... more125. Powermax 1000/1250/1650.
$
3249.99
Buy It Now
Free Shipping
Condition: Used
Location: Ponca City, United States
Part Number : 059266.
$
14.90
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Powermax 30AIR. Powermax 30XP. Powermax 30. Powermax 45. Powermax 45XP/65/85/105. Powermax 125. Powermax 1000/1250/1650. Plasma consumables.
$
18.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
Ideal for plasma cutting applications. Color: As illustrated in the pictures.
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
Upgrade your Hypertherm Powermax plasma cutter with these 5 Pcs 220941 Plasma Cutter Nozzles to achieve optimal cutting performance and reliability. Premium ... moreQuality: Crafted from high-quality materials, these nozzles are built to withstand the rigors of plasma cutting.
$
2340.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe, United States
With a built in air compressor, it's the smallest, lightest handheld plasma cutting system in its class so you can take the Hypertherm Powermax 30 AIR ... morePlasma Cutter to where the work is rather than bring the work to the system.
$
42.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
These shields are designed to fit Hypertherm Powermax 45XP/65/85/105 plasma torches.
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
MAX 40cs, MAX42, MAX43. Fits Hypertherm® Powermax 600 800 900 MAX 40cs, MAX42, MAX43. 120301 - 120600 Retaining Cap. 1pc x 120600 / 120301 Retaining Cap.
$
20.75
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
1pc x Swirl Ring 220013 fits Hypertherm MAX20 PAC110 Torches. - including Powermax. ®350 and Powermax. Experts in Plasma Cutting Parts, Service & Repair ... morefor over 10 Years.
$
54.99
Buy It Now
Free Shipping
Condition: New
Location: Wooster, United States
For use on Powermax 45XP, 65, 85, 105, MRT, HRT & HRTs. Part# 220842. Genuine Hypertherm Electrodes. 10 Amp to 105 Amp.
$
273.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe, United States
You can use the Hypertherm basic plasma cutting guide to create high-quality straight cuts, bevel cuts, and circle cuts between 4 in. and 22 in. Hypertherm ... moreBasic Circle Cutting Guide 127102. Plasma Cutting.
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Pacific, United States
This is NOT A HYPERTHERM OR MILLER TORCH. parts in this ad DO NOT FIT ANY MILLER TORCH Torch uses STANDARD Hypertherm Parts for an AMAZING CUT. X45 - ... moreRetrofit Plasma Torch. Retrofit Plasma Torch 6m (~20 foot).
$
333.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
20 Pcs 220941 Plasma Torch Nozzles 45A For. Part Number: 220941. Powermax 45XP 65 85 105 HRT HRTs MRT. For 65 85 After Market Consumable. We will reply ... moreto you within 24 hours. S pecification.
$
2500.00
Buy It Now
$150.00 Shipping
Condition: Used
Location: San Diego, United States
Hypertherm HyPerformance Plasma Gas Console No. 078170 Serial no. HPRC 500836& HPRC 501409 These gas consoles are used but came off working systems ... morethat were upgraded. Both are in very good condition. If you have any questions or concerns feel free to call 414-264-5848 ask for Joe. Posted with
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Hypertherm Powermax 45 Plasma Cutter with 25' Hand Torch
You are bidding on a lightly used Hypertherm Powermax 45 in excellent working condition. Machine cuts 1/2" metal. Single phase 208-240 volts. 25' hand torch. Buyer pays flat rate of $40.00 shipping to the continental U.S. only.
hypertherm powermax800 plasma cutter / 800 for parts
the auction is for a PLASMA CUTTER HYPERTHERM POWERMAX800. This item doesn't turn on, so i'm selling for PARTS OR FIXED. PLEASE CHECK THE PICTURES WELL. WHAT YOU SEE IS WHAT YOU GET winner pay for shipping and handle $65.00 to the lower 48 states. Must pay within 5 days after auction is finished, if you are located in hawaii, canada or alaska please contact me for shipping cost. THANKS FOR LOOKING, PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. ANY QUESTION E-MAIL ME thanks and good luck Posted with the
HYPERTHERM POWERMAX 380 PLASMA CUTTER WORKS GREAT
HYPERTHERM POWERMAX 380 PLASMA CUTTER Item is used In Great Working Condition, Comes with everything shown in pictures. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES ... moreExcept Hawaii. Alaska and Puerto Rico. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concearns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
HYPERTHERM POWERMAX 105 PLASMA CUTTER 059374 - Mfg. Refurbished 3 yr warranty
Hypertherm Powermax 105 Plasma Cutting System with 25' hand torch P/N 059374 Hypertherm factory refurbished Powermax 105 plasma cutting system in near new condition- comes with Hypertherm 3 year warranty on the power source. Exactly the same machine as new models- cuts up to 1.5" thick material at 10 inches per minute. Severs up to 2" material. Great machine for heavy duty hand cutting and gouging. Operates on 200 to 480/600v 3phase 50/60hz power- certified to CSA standards. May be adapted to machine cutting tables with the addition of a machine torch. CNC interface, control cord or on/off control- email or call for details- telephone 800-686-4674. Unit will ship by truck- $125 freight to any location in the 48 states. We are a 94 year old welding equipment distributor and a Hypertherm distributor and warranty repair facility. ... moreOptional torches. Air filters, spare parts etc. available from stock and can ship free with the unit. Please email or call 800-686-4674 for additional information. With the maximum power and performance for air plasma in our line. The Powermax105 delivers superior cut capabilities on 1-1/4" 32 mm) thick metals. It has the duty cycle and reliability for the most demanding cutting and gouging jobs. Seven Duramax torch styles provide greater versatility for hand cutting, portable automation, x-y table cutting, and robotic cutting and gouging. Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length. It also detects electrode end-of-life, automatically turning off power to the torch to prevent potential damage to other parts or the workpiece. Applications. Hand cutting, Gouging, Automated cutting, X-Y Table, Track systems, Pipe systems, Robotic systems, Capacity, Thickness, Cut speed, Handheld cut, Recommended, 1-1/4" 32 mm) 20 ipm(500 mm/min) 1-1/2" 38 mm) 10 ipm(250 mm/min) Severance, 2" 50 mm) 5 ipm(125 mm/min. Pierce, 7/8" 22 mm) Pierce rating for handheld use or with automatic torch height control.
Hypertherm PowerMax 30 Plasma Cutter. Extra consumables, 110V and 220V w/ strap
Hypertherm Powermax 30 Plasma Cutter Includes: extra consumables kit 110V and 220V adaptors Carying strap. Cuts up to 1/2" metal. Works perfect. And looks almost new. Please email me with any questions. It is for sale locally so this auction may end early.
HYPERTHERM POWERMAX45 PLASMA CUTTER W/ TORCH AND CONSUMABLES Powermax 45
Up for sale is this slightly used Hypertherm Powermax45 Plasma Cutter. I have included the torch as well as many consumables that cost hundreds extra. Save money! The Plasma Cutter works great and has plenty of life left in it!
Hypertherm Max 43 Plasma Cutter
Hypertherm Max 43 Plasma Cutter single phase 208/240V 38/33 Amp 50/60hz gun- 110volt 40 amp duty 50% ocv 300V gun- PAC 120 Posted with the
Hypertherm Max 43 Plasma Cutter W/ Torch & Consumables
You are bidding on Hypertherm Max 43 Plasma Cutting System. 480 single phase not re-connectable. Includes the torch and many consumables. Three used retaining caps and one brand new in the box. If you have any questions regarding this item please contact us by e-mail or phone and good luck bidding. ADVERTISED AS PICK-UP ONLY BUT. WE WILL HELP YOU SET UP SHIPPING. Please see more of our inventory here http:stores.ebay.com/pleasantstmachinery. And. Http:picasaweb.google.com/pleasantstmachinery. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. An additional $35/pallet fee is required for each pallet used on truck ... moreshipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assu
Hypertherm 1250 plasma cutter
Low hour hypertherm 1250. Has 25 ft leads. Currently wired for three phase will run on single phase. Capacity. 85 amps will sever. 1 1/4" plate Rated continuous 1" Plunge. 3/4" Local pickup available. Ships to USA only. Buyer pays shipping calculated at end of auction. Posted with
HYPERTHERM POWERMAX 30 PLASMA CUTTER 088003 Mfg Refurbished -3 yr warranty
Hypertherm Powermax 30 Plasma Cutting System with T30v hand torch P/N 088003 Factory Reconditioned Hypertherm Powermax 30 plasma cutting system in like new condition- comes with Hypertherm full 3 year warranty on the power source. Cuts up to 3/8" thick material at 10 inches per minute with a maximum severance cut of 1/2" Operates on 115 or 230v single phase power. 50/60hz. Uses clean, dry compressed air. Email or call with technical questions- telephone 800-686-4674 Don't let the small size fool you. The Powermax30 does the work of systems twice its size and weight. It efficiently cuts ¼" 6 mm) metal. Includes a shoulder strap for increased portability. Applications. Hand cutting- Standard system components, Power supply, T30v hand torch, Extra consumables for cutting, Work cable with clamp. 15' 4.5m) Hypertherm ... morecarrying strap, CSA units include 240/20 amp plug with adapter plugs for 120 V/15 amp and 240 V/20 amp circuits, Unit will ship by UPS- free freight to any location in the 48 states. Email for rates to AK/HI/PR or international destinations. We are a 95 year old welding equipment distributor and a Hypertherm distributor and warranty repair facility. Air filters. Spare parts etc. available from stock and can ship free with the unit. Specifications. Capacity, Thickness, Cut speed, Handheld cut, Recommended, 1/4" 6 mm) 20 ipm(500 mm/min) 3/8"10 mm) 10 ipm(250 mm/min) Severance, 1/2" 12 mm) 5 ipm(125 mm/min. Input Voltages CSA CE 120– 230 V. 1-PH, 50/60 Hz 120– 230 V. 1-PH, 50/60 Hz Input Current@ 2.49 kW CSA CE 120– 230 V. 1-PH, 26– 13.5 A 120– 230 V. 1-PH, 26– 13.5 A, Output current 15- 30 A, Rated output voltage 83 VDC, Duty cycle@ 40°C(104°F) CSA CE 50% 230 V 35% 120 V 50% 230 V 35% 120 V, Open circuit voltage(OCV) 240 VDC, Dimensions with handles 14.0" 356 mm) D; 6.6" 168 mm) W; 12.0" 305 mm) H, Weight with 15' 4.5 m) torch CSA CE 20 lbs(9.7 kg) 21 lbs(10 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow
Hypertherm Powermax 900 Plasma Cutter Powermax900 20A-55A Adjustable Hand Torch
Unit is in great working condition. new consumables. Plus extras included. I bought it at an auction and had some repairs done to it to be sure it is now in good working condition. Everything in photos is included. Input Voltages: 208/240/480 V. Single or Three Phase, 60 Hz Input Current Single Phase: 55/47/28 AMPS per above Input Voltage Input Current Three Phase: 32/28/15 AMPS per above Input Voltage Output Voltage: 120 VDC Output Current: Adjustable. 20-55 Amps Duty Cycle: 50% 55 Amps& 100% 39 Amps with Ambient Temp 40°C(104°F)
HYPERTHERM POWERMAX 1000 G3 PLASMA CUTTER --- AS CLOSE TO NEW AS IT GETS
HYPERTHERM POWERMAX 1000 G3 PLASMA CUTTER HYPERTHERM POWERMAX 1000 G3 PLASMA CUTTER. IN 100% GREAT WORKING CONDITION. NO ISSUES. PLUG IT IN AND START WORKING. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN ... more8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
HYPERTHERM CHILLER FOR PLASMA CUTTER COOLER FOR PARTS
HYPERTHERM CHILLER. PULLED FROM PLASMA MACHINE. SEE PICTURES. SOLD AS-IS. Posted with the
NEW Hypertherm CNC high definition plasma cutter 5 x 10 bed 130 amp
IN STOCK for immediate delivery includes; training, installation* and 1 year warrenty. For more information; Jack 800 382 8322 or email; jack(at)fmsweb.com We reserve the right to cancel this listing at anytime as we have dealers promoting this machine. Check Our 100% Feedback! Includes; 5 x10 Downdraft Table. Hypertherm 130 AMP High Definition source. PlasmaPro Software, True Hole Technology. Install& Trainng. NEW Hypertherm 130 amp high definition Plasma Cutting System. New and underpowwer to demonstrate cutting your parts. 5' x 10' cutting table cuts mild steel plate. Stainless and aluminum with precision 1/4" ms at 150 inches per minute 3/8" ms at 110 ipm 1/2" ms at 80 ipm 3/4" ms at 45 ipm 1 inch at 20 ipm 1.5" at 10 ipm This machine includes: automatic gas console control, software and TRUE HOLE ... moretechnology. Thanks for looking!
Hypertherm Powermax 1000 G3 Series Plasma Cutter Low Hours! Cuts 1/2"!
Hypertherm Powermax 1000 G3 Series. This unit has been used very little and has less than 25 hours for sure. I think it is more like 15 but will say 25 to be safe. Bid with confidence. This unit works great! Excellent lightly used condition. Operating data Cut capacity Mechanized pierce Maximum 1/2" 12 mm) Gouge Capacity Metal removed per hour: 11 lbs(4.9 kg) Depth x width: 3/16" 5 mm) x 1/16" 2 mm) Applications Mechanized cutting- X-Y table- Track systems- Pipe systems- Robotic systems Hand cutting Gouging Standard system components Power supply T60M machine torch Extra consumables for cutting Work cable with clamp. 15' 4.5 m) Interface cable. 25' 7.6 m) Remote pendant. 25' 7.6 m) Specifications Capacity Mild steel Dross free Maximum pierce capacity n⁄a 12 mm(1/2" Stainless steel Maximum pierce capacity 12 ... moremm(1/2" Aluminum Maximum pierce capacity 12 mm(1/2" Speed* Mild steel) At maximum pierce capacity 12 mm(1/2" 686 mm/m(27 ipm) Cut angle ISO 9013 range 5 Weldability Preparation required Process gases by material(Plasma/shield) Mild steel Air Stainless steel Air. N2 Aluminum Air. N2 Process amps Not all processes available for all materials 20-60 Posted with
2009 HYPERTHERM POWERMAX 1650 PLASMA CUTTER WITH T100-2 MACHINE TORCH
MG CNC PLASMA BURNING MACHINE. 440 VOLT, 3 PHASE, 72" X 24' TABLE, 2009 HYPERTHERM POWERMAX 1650 PLASMA CUTTER WITH T100-2 MACHINE TORCH, 2009 HYPERTHERM MODEL PHC HEIGHT SENSOR, 1999 MESSER MODEL PILOT CNC CONTROL, PIERCE CAPABILITY = 3/4" CUT CAPABILITY = 1 1/4" SHOP DATA SYSTEMS SOFTWARE: BASIC SOFTWARE INCLUDES 60 GENERAL SHAPES PROGRAMMABLE FROM BURNING MACHINE AND MANUAL NESTING FROM MACHINE. AUTOMATIC NESTING FROM COMPUTER INCLUDED. QUICKCAM IS DUCT WORK PROGRAM WHICH YOU JUST FILL IN DIMENSION NUMBERS ON A PICTURE OF THE DUCT. COMPUTER NOT INCLUDED, BUT SELLER WILL PROVIDE THE SDS SOFTWARE ON A DISK WHICH CAN BE INSTALLED ON ANY COMPUTER) THIS IS AN UPGRADED MACHINE IN EXCELLENT CONDITION THAT NEEDS TO BE SEEN TO BE APPRECIATED* Must be removed by June 7. 2013 Feel free to ask any questions.Thanks All bidders participating ... morein this auction agree that they have read and fully understand these terms and agree to be bound thereby. At AP Liquidations Inc. We purchase and resell a variety of application specific equipment and machinery, which can be used, brand new, or surplus inventory. These assets are sold"AS-IS" and in various condition. We do our best to answer any questions and provide as much information as possible; however we may be limited in knowledge due to the wide range of equipment we offer. No claims are made as to working condition. This is auction inventory and therefore sold"AS-IS" AP Liquidations Inc. shall not be responsible for the correct description. Authenticity, genuineness or defect in any way and makes no warranty in connection therewith. ALL SALES ARE FINAL. NO DEDUCTION WILL BE ALLOWED FOR DAMAGED ARTICLES, ALL ITEMS ARE BEING SOLD“AS-IS” WHERE IS” AND WITHOUT RECOURSE. Payment& Default: Full payment for item purchased must be made within 24 hours of end of auction. Payments are not accepted at time of pickup. The FULL purchase price of sold item must be paid within the 24 hour time limit and before removal of sold item. In default of paym
HYPERTHERM SA20 PLASMA CUTTER WITH AIR COMPRESSOR 120V WORKS FINE
HYPERTHERM SA20 PLASMA CUTTER WITH AIR COMPRESSOR 120V WORKS FINE HYPERTHERM SA20 PLASMA CUTTER WITH AIR COMPRESSOR 120V WORKS FINE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND ... moreNY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ed00684ce-0x103-
HYPERTHERM POWERMAX 30 PLASMA CUTTER TORCH 110V 220V PORTABLE HANDHELD
THIS IS A HYPERTHERM POWERMAX 30 PLASMA CUTTER. SMALL AND VERY PORTABLE. COMES WITH 110 AND 220V PLUGS. 220V PLUG UNUSED) UNIT IS IN EXCELLENT CONDITION. VERY LIGHTLY USED AND WELL CARED FOR. TESTED AND WORKS GREAT(GREEN LIGHT INDICATES UNIT IS READY. YELLOW INDICATES THAT AIR TANK IS NOT ATTACHED OR NEEDS MORE LINE PRESSURE) IF YOU HAVE ANY QUESTIONS PLEASE ASK! THANKS FACTORY INFO: Dont miss out on this one! After the au ction ends. You must call us after auction's end to pay by Visa or Master credit cardas we do NOT take online payments. paypal) Our hours of operation are Monday-Friday 9AM to 8PM central time only. You must call in order to pay for this item. Texas residents must pay 8.25% sales tax. We accept Visa and Master Card only. Shipping and handling for this item is $45.00. INSURANCE INCLUDED Feel free to ask any questions. ... moreNo overseas bids. Mainland 48-states only. THANK YOU! T14652
Hypertherm Powermax 1650 G3 Plasma Cutter with 25' Torch
This Plasma has been tested. Works great and can cut up to 1.5" material. Call 404-736-6494 with any questions or to get a shipping quote. The Powermax 1650® is the latest addition to the Powermax® G3 Series™ of systems. With advanced technologies in both power supply and torch. Hypertherm® G3 products cut faster, and more economically, than any system available anywhere today. Its Auto-voltage™ circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 3-phase(CE 203 to 400 volts 3-phase) A state-of-the-art, microprocessor-driven architecture assures optimum system reliability. Add to this Hypertherm's advanced torch technology, and easy-to-ready controls and features, and you have the most powerful, advanced, and reliable plasma cutter money can buy. Features: 100-amp. 16-kilowatt output provides ... moreample power for cutting heavy plate cleanly and quickly. Auto-voltage™ input sensing allows you to run on voltages from 200 to 600 volts. 3-phase, with no rewiring. CNC/robotic machine interface is standard on all units. Allowing automated control and rapid change over to mechanized operation. New Boost Conditioner™ circuit compensates for input voltage variation. Advanced digitally-controlled inverter design delivers continuously adjustable constant current output. From 30 to 100 amps, producing high-quality cuts over a wide range of metal thicknesses. An active. Electronic pilot-arc controller for cutting expanded metal or grating preserves consumable life. A new gouging setting allows for longer arc lengths and easier operation. Plus a metal removal rate in excess of 22 pounds per hour(10 kg) Wheels are standard on the Powermax 1650® and provide improved mobility over rough and uneven surfaces. Back-lit LED's clearly convey all the information necessary to monitor the system status. Including an easily readable and understandable air pressure gauge. Benefits: Hypertherm's ETR™(Easy Torch Removal) system allows for easy switching between hand and machine tor
PLASMA CUTTER HYPERTHERM POWERMAX 60 ,80 OR 100 PLASMA TORCH ASSEMBLY
HYPERTHERM POWERMAX 60. 80 OR 100 PLASMA TORCH ASSEMBLY.THIS IS A 25 FOOT TORCH AND CABLE. THIS IS IN VERY GOOD CONDITION,AND WOULD MAKE AN EXELENT SPARE,OR YOUR MAIN EVERY DAY PLASMA TORCH. THIS WOULD COST YOU OVER FIVE HUNDRED DALLORS AT YOUR LOCAL WELDING SUPPLY.
HYPERTHERM PCM 875 PLASMA CUTTER w/ PT-27 TORCH
SERIAL# PE-1829127 INPUT: 208/230 VOLTS AC. SINGLE OR 3-PHASE, AMPS: 55/26, 49/24 OUTPUT: 60 AMPS DC AT 120 VOLTS DC. 60% DUTY CYCLE 50 AMPS AT 120 VOLTS DC. 100% DUTY CYCLE WEIGHT: 87 POUNDS DIM: 21 x 17 x 19 MACHINE HAS REBUILT TORCH. 50’ PT-27, P/N 21621 Seller is an authorized repair and warranty service center for all major welding brands. All machines have been thoroughly checked out and/or repaired and are in good working order. Be sure to check out our other listings for welding equipment! tag 1841.
Hypertherm Powermax 600 Plasma Cutter with Fine cut kit
I have had this plasma cutter for about 5 years. It slices through everything very easily. I have personally severed 3/4" plate and its spec sheet calls for 7/8" as well. There is a handful of consumables that come with it. And a brand new never used fine cut kit that allows for an extremely small kerf on steel up to 11ga(about 1/8" I believe) Would prefer a local pickup and am willing to drive some if negotiated prior to auction end. Shipping is an estimate only and I will ship by actual cost via FedEx.
HYPERTHERM POWERMAX 65 PLASMA CUTTER 083270 Mfg Refurb 3 yr warranty 25' torch
Hypertherm Powermax 65 Plasma Cutting System with 25' hand torch P/N 083270 Hypertherm factory refurbished Powermax 65 plasma cutting system- comes with Hypertherm 3 year warranty on the power source. Excellent condition. Exactly the same machine as new models- cuts up to 1" thick material at 10 inches per minute. Excellent machine for cutting tables- comes with built in interface for automation controls. A great machine at an outstanding price. May be adapted to machine cutting tables with the addition of a machine torch and on/off control- email or call for details- telephone 800-686-4674. Unit will ship by UPS- $35 freight to any location in the 48 states. Email for rates to AK/HI/PR or international. We are a 95 year old welding equipment distributor and a Hypertherm distributor and warranty repair facility. Optional torches. ... moreAir filters, spare parts etc. available from stock and can ship free with the unit. Please email or call 800-686-4674 for additional information. Specifications. Input Voltages CSA 200– 480 V. 1-PH, 50/60 Hz Input Current@ 9 kW CSA 200/208/240/480 V. 1-PH, 52/50/44/22 A Output current 20- 65 A, Rated output voltage 139 VDC, Duty cycle@ 40°C(104°F) CSA 50% 65 A. 230– 600 V, 1/3-PH Open circuit voltage(OCV) CSA 295 VDC Dimensions with handles 19.7" 500 mm) D; 9.2" 234 mm) W; 17.9" 455 mm) H, Weight with 25' 7.6 m) torch CSA 64 lbs(29 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure Cutting: 400 scfh; 6.7 scfm(189 l/min) 85 psi(5.6 bar) Gouging: 450 scfh; 7.5 scfm(212 l/min) 70 psi(4.8 bar) Input power cable length 10' 3 m) Power supply type Inverter- IGBT. For cutting and gouging metal Operating data, Capacity Thickness, Cut speed, Handheld cut Recommended, 3/4" 19 mm) 20 ipm(500 mm/min) 1"25 mm) 10 ipm(250 mm/min) Severance, 1-1/4" 32 mm) 5 ipm(125 mm/min. Pierce, 5/8" 16 mm) Pierce rating for handheld use or with automatic torch height control. Metal removal rate, Gouge capacity, 10
HYPERTHERM POWERMAX 45 PLASMA CUTTER 088016 Mfg Refurbished -3 yr warranty
Hypertherm Powermax 45 Plasma Cutting System with 20' T45V hand torch P/N 088016 Factory Reconditioned Hypertherm Powermax 45 plasma cutting system in like new condition- comes with Hypertherm full 3 year warranty on the power source. Cuts up to 3/8" thick material at 10 inches per minute with a maximum severance cut of 3/4" Operates on 200- 240v single phase power. 50/60hz. Uses clean, dry compressed air. A great medium duty plasma cutter at an outstanding price. Hand torch may be exchanged for machine torch or different cable lengths for additional charge. Email or call for details- telephone 800-686-4674 Unit will ship by UPS- $15.00 to any location in the 48 states. Email for rates to AK/HI/PR or international destinations. We are a 95 year old welding equipment distributor and a Hypertherm distributor and warranty repair ... morefacility. Air filters. Spare parts etc. available from stock and can ship free with the unit. Specifications. Input Voltages(± 10% CSA 200– 240 V. 1-PH, 50-60 Hz Input Current@5.95 kW CSA 200/230 V. 1-PH, 34/28 A 230 V. 1-PH, 30 A Output current 20- 45 A, Rated output voltage 132 VDC, Duty cycle@ 40°C(104°F) CSA 50% 45 A. 200– 240 V, 1-PH 60% 41 A. 200– 240 V, 1-PH 100% 32 A. 200– 240 V, 1-PH Open circuit voltage(OCV) 275 VDC, Dimensions with handles 16.75" 426 mm) D; 6.75" 172 mm) W; 13.7" 348 mm) H, Weight with 20' 6.1 m) torch CSA 37 lbs(17 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure Cutting: 360 scfh; 6 cfm(170 l/min) 80 psi(5.5 bar) Gouging: 360 scfh; 6 cfm(170 l/min) 60 psi(4.1 bar) Input power cable length 10' 3 m) Power supply type Inverter- IGBT, Engine Drive Rating(kW) System Output(amps) Performance(arc stretch) 8. 45. Full. 6. 45. Limited. 6. 30. Full. Material Thickness Current Maximum cut speed* inches mm amps. Ipm. Mm/min. Mild Steel 10 GA 1/4 3/8 1/2 3/4 1, 3 6 10 12 19 25. 45 45 45 45 45 45. 175 75 40 25 10 5. 4445 1905 1016 635 254 127. Stainless Steel 10 GA 1/4 3/8 1/2 3/4
HYPERTHERM POWERMAX 380 PLASMA CUTTER WELDER SHOP HOT ROD CAMARO MUSCLE CAR SHOP
Portable machine with recommended 1/4" capacity. Operates on 115 or 230 volt current. Output- 27 amps. Weight- 55 lbs. Standard Equipment: Power Supply PAC110T Torch 20' 6.1 m) Spare Consumables and Air Fitting Work Cable and Clamp 15' 4.6 m) Barely used!
hypertherm plasma cutter powermax 800
HYPERTHERM PLASMA CUTTER THE AUCTION IS FOR NICE HYPERTHERM PLASMA CUTTER MODEL POWERMAX800 WITH GUN INCLUDED IN GOOD WORKING CONDITIONS. WHAT YOU SEE IS WHAT YOU GET winner pays for shipping and handle $85.00 to the lower 48 states. Must pay within 5 days after auction is finished, if you are located in hawaii, canada or alaska please contact me for shipping cost. THANKS FOR LOOKING, PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. ANY QUESTION E-MAIL ME thanks and good luck
Hypertherm powermax 900 plasma cutter 3 phase
HYPERTHERM POWERMAX 900 PLASMA CUTTER. 3 PHASE. GREAT CONDITION. USED LAST WEEK.
Hypertherm Powermax 600 Plasma Cutter Powermax600
Hypertherm Powermax 600 Plasma Cutter. 40A Max Condition: Excellent. Has some marks& scratches See label photo for performance details. Accessories include: Plasma Torch Ground Lead& Clamp Various Cutting Tip Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
2 - Hypertherm Plasma Cutter Main Body Torch 020080 Parts Only
2 Hypertherm 020080 plasma cutter main body torches for sale. Got these when purchased a business that closed. One is labeled"works. But is not well cut" Not sure what that means so selling as parts only. Please see pictures for what's included(no more/no less) Thank you for looking. Please see our other items for sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f5590c009-0x104-
Hypertherm Powermax 30 Plasma Cutter Parts...Torch, Regulator, Fan +++++
These parts were taken off of a machine that had a bad circuit board. It was working good before the board went bad. Included: torch with 15 foot cord. 10 foot AC power cord, air filter/regulator, fan, ground cord and clamp(has some wear) one tip on torch(fairly new) one used tip, operators manual, wiring schematic and other papers. Please email with questions.
Hypertherm Max200 Plasma Cutter Cutting System w/ Hose and Gun
Hypertherm Max200 Plasma Cutter Cutting System w/ Hose and Gun Model-Max200 Serial-200-002596 This is a 220v 3 phase plasma cutting system with a hypertherm PAC200T gun and hose. This is a buyer to pay exact freight auction.please email me for a quote.we get amazing rates! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are to assume ... moreit is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladly accept PAYPAL or email me about payment options.
HYPERTHERM POWERMAX 85 PLASMA CUTTER 087108 - Mfg. Refurbished 3 yr warranty
Hypertherm Powermax 85 Plasma Cutting System with 25' hand torch P/N 087108 Hypertherm factory refurbished Powermax 85 plasma cutting system in near new condition- comes with Hypertherm 3 year warranty on the power source. Exactly the same machine as new models- cuts up to 1.25" thick material at 10 inches per minute. Great machine for cutting tables- comes with built in interface for automation controls. Operates on 200 to 480/600v single or 3phase 50/60hz power- certified to CSA standards. May be adapted to machine cutting tables with the addition of a machine torch. CNC interface and on/off control- email or call for details- telephone 800-686-4674. Unit will ship by UPS- $38 freight to any location in the 48 states. Email for rates to AK/HI/PR or international. We are a 94 year old welding equipment distributor and a Hypertherm ... moredistributor and warranty repair facility. Optional torches. Air filters, spare parts etc. available from stock and can ship free with the unit. Please email or call 800-686-4674 for additional information. for cutting and gouging metal Operating data, Capacity Thickness, Cut speed, Handheld cut capacity, Recommended, 1" 25 mm) 20 ipm(500 mm/min) 1-1/4"32 mm) 10 ipm(250 mm/min) Severance, 1-1/2" 38 mm) 5 ipm(125 mm/min. Pierce, 3/4" 19 mm) Pierce rating for handheld use or with automatic torch height control. Metal removal rate, Gouge capacity, 19.5 lbs. 8.8 kg) per hour, Groove profile, 23" 5.8 mm) D x.28" 7.1 mm) W. Input Voltages CSA 200– 480 V. 1-PH, 50/60 Hz 200– 600 V. 3-PH, 50/60 Hz Input Current@12.2 kW CSA 200/208/240/480 V. 1-PH, 70/68/58/29 A 200/208/240/480/600 V. 3-PH, 42/40/35/18/17 A Output current 25- 85 A, Rated output voltage 143 VDC, Duty cycle@ 40°C(104°F) CSA 60% 85 A. 230– 600 V, 3-PH 60% 85 A. 480 V, 1-PH 50% 85 A. 240 V, 1-PH 50% 85 A. 200– 208 V, 3-PH 40% 85 A. 200– 208 V, 1-PH 100% 66 A. 230– 600 V, 1/3-PH Open circuit voltage(OCV) CSA 305 VDC 2, Dimensions with handles 19.7" 500 mm) D; 9.2" 234 mm) W;
Hypertherm Powermax 1100 Plasma Cutter
Hypertherm Powermax 1100 plasma cutter. Wired single phase 220. T his is a used machine in good working condition. It is single or three phase 208 through 480 volt input. It has an 80 amp output capability. PAC135T hand torch with 25' chord. Machine Power Chord is 25' as well as Ground lead. Perfect for manual cutting or CNC machine. Includes: extra media 17 new torch nozzles 3 new tips and more This baby runs nice. Commercial grade plasma cutter will suit your needs for years to come. Check pictures and if there are any questions please contact before auction end. Item is sold in"as-is. used condition. Locals can arrange for preview and pickup. Because this items weighs close to 100 pounds, please allow plenty of money for standard shipping and insurance. Judging by other items it can be around 100 or more to ship. This machine ... morecan make you money. So don't settle for a lesser model. This model cuts up to 1- 1/2" steel.
hypertherm plasma cutter powermax 1250 G3 series
hypertherm plasma cutter powermax 1250 G3 series YOU ARE BIDDING ON A hypertherm powermax 1250 IN GREAT WORKING CONDITIONS it comes as shown in the pictures. PLEASE CHECKS PICTURES! Winner pay for shipping and handle $85.00 just to the lower 48 states.USA) if you are located in ALASKA, HAWAII, CANADA OR PUERTO RICO please contact me for a shipping cost. thanks and good luck. WHAT YOU SEE ITS WHAT YOU GET! THANKS FOR LOOKING GOOD LUCK SE HABLA ESPAÑOL Hypertherm® Powermax 1250® G3 Series™ Plasma Machine With Hand Torch and 25' Leads, 200-600 Volt. 1/3 Phase, 50/60 Hz PART NUMBER: HYP087008 Overview Accessories& Related Products The Powermax1250 is the first of the Powermax G3 Series. With new technologies in both power supply and torch. It cuts faster and more economically than any system available today. In fact, it ... morecuts 80% faster on 1-inch(25 mm) mild steel than any competitor tested. Its Auto-voltage™ circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 1- or 3-phase. A state-of-the-art, microprocessor-based architecture assures optimum system reliability. Add to this Hypertherm's advanced torch technology and easy-to-read controls, and you have the most advanced plasma cutter money can buy. Features: Auto-voltage™ automatically adapts to any incoming power from 200 V– 600 V. 1- or 3-phase. Coaxial-assist™ jet technology delivers fast cut speeds. Boost Conditioner™ compensates for input voltage variations. Providing improved performance on low-line voltage, on motor generators and on fluctuating input power. Reliability-focused design improves uptime and maximizes return on investment. CNC interface and Easy Torch Removal(ETR™) provide increased versatility for handheld and mechanized usage. Specification: The Powermax 1250 is backed by a full three-year power supply warranty and a one-year torch warranty. Includes: Power Supply T80 Torch with 25' leads Spare Consumables Work Cable and Clamp 15' 4.6 mm) Application: Cutting, Gouging, Specs: Input
Hypertherm Powermax 1250 G3 Series™ Plasma Cutter 25ft Hand Torch 85 auto power
Used in home garage to cut tabs and panels for off road fabrication. Has some pelt marks on the top warning label stickers. Hours unknown. Tested on single phase 220 with a 12 gallon compressor and it works great! A few extra nozzles/tips are included. Also included is an Air Filtration 1-Micron Filter and Auto-Drain Moisture Separator $200 value. From the manufacturer: The Powermax1250 is the first of the Powermax G3 Series. With new technologies in both power supply and torch. It cuts faster and more economically than any system available today. In fact, it cuts 80% faster on 1-inch(25 mm) mild steel than any competitor tested. Its Auto-voltage™ circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 1- or 3-phase. A state-of-the-art, microprocessor-based architecture assures optimum system reliability. Add to ... morethis Hypertherm's advanced torch technology and easy-to-read controls, and you have the most advanced plasma cutter money can buy. Features: Auto-voltage™ automatically adapts to any incoming power from 200 V– 600 V. 1- or 3-phase. Coaxial-assist™ jet technology delivers fast cut speeds. Boost Conditioner™ compensates for input voltage variations. Providing improved performance on low-line voltage, on motor generators and on fluctuating input power. Reliability-focused design improves uptime and maximizes return on investment. CNC interface and Easy Torch Removal(ETR™) provide increased versatility for handheld and mechanized usage. Specification: The Powermax 1250 is backed by a full three-year power supply warranty and a one-year torch warranty. Includes: Power Supply T80 Torch with 25' leads Spare Consumables Work Cable and Clamp 15' 4.6 mm) Application: Cutting Gouging Specs: Input AC Voltage 200V. 208- 575V Maximum Severance 1 1/2 in Gas Air Posted with Posted with eBay Mobile
(BARELY-USED) HYPERTHERM POWERMAX 30 HANDHELD PLASMA CUTTER
PRE-OWNED) BARELY- USED) HYPERTHERM POWERMAX 30 HANDHELD PLASMA CUTTER. The Powermax30 does the work of systems twice its size and weight. It efficiently cuts ¼" 6 mm) metal. Applications Hand cutting- Standard system components- Power supply- T30v hand torch- Extra consumables for cutting- Work cable with clamp. 15' 4.5m) Hypertherm carrying strap- CSA units include 240/20 amp plug with adapter plugs for 120 V/15 amp and 240 V/20 amp circuits•Hand cutting- Deluxe system components All standard system components plus: Rugged carrying case- Enhanced consumable kit- Plasma cutting guide- Cutting gloves Capacity Thickness Cut speed Handheld cut Recommended 1/4" 6 mm) 20 ipm(500 mm/min) 3/8"10 mm) 10 ipm(250 mm/min) Severance 1/2" 12 mm) 5 ipm(125 mm/mi Specifications Input Voltages CSA CE 120– 230 V. 1-PH, 50/60 ... moreHz 120– 230 V. 1-PH, 50/60 Hz Input Current@ 2.49 kW CSA CE 120– 230 V. 1-PH, 26– 13.5 A 120– 230 V. 1-PH, 26– 13.5 A Output current 15- 30 A Rated output voltage 83 VDC Duty cycle 40°C(104°F) CSA CE 50% 230 V 35% 120 V 50% 230 V 35% 120 V Open circuit voltage(OCV) 240 VDC Dimensions with handles 14.0" 356 mm) D; 6.6" 168 mm) W; 12.0" 305 mm) H Weight with 15' 4.5 m) torch CSA CE 20 lbs(9.7 kg) 21 lbs(10 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure 240 scfh. 4 scfm(113 l/min) 80 psi(5.5 bar) Input power cable length 10' 3 m) Power supply type Inverter- IGBT Engine-driven generator operation Engine Drive Rating(kW) System Output(amps) Performance(arc stretch) 5.5 30 Full 4 25 Limited ITEM WAS TESTED BEFORE LISTING IT& IS IN 100% WORKING CONDITION. THERE WILL BE A NEW YORK STATE SALE TAX RATE OF 8.875% AND IT WILL BE ADDED TO THE FINAL SALE PRICE FOR ANY NEW YORK BUYER. GOOD LUCK BIDDING! WHAT YOU SEE IN PICTURES IS WHAT YOU ARE BIDDING ON. WE PROVIDE CLOSE UP PICTURES ITEMS HAVE: THE FOLLOWING: PLEASE VIEW PICTURES FOR CONDITION OF ITEMS VERY LIGHT WEAR AND TEAR. SCRATCHES. SCUFF MARK'S. ECT
5 HYPERTHERM PLASMA CUTTER 120447 ELECTRODE REPLACEMENT
SquareTrade © AP6.0 NEW IN PACKAGE PACK OF 5 HYPERTHERM PLASMA CUTTER ELECTRODES WE DO NOT KNOW WHAT MODELS IT FITS AND WILL NOT REPLY TO YOU ASKING DO YOUR HOMEWORK- GOOGLE YOUR"MODEL# ELECTRODES" AND COMPARE THE PART#S AS IT MAY FIT SNAP ON AND OTHER BRANDS ALSO ALL SALES FINAL MODEL NUMBER, S) MARKED ON THIS ITEM IS: 120447 DIMENSIONS OF THIS ITEM(IN APPROX INCHES) ARE: 1 1/8" WHAT WAS TESTED ON OR WITH THIS SPECIFIC ITEM: NEW WHAT WE FOUND* GUARANTEED NEW*To assist you the buyer. We often test most items prior to listing as noted above. This is only to guide you as to what we experienced and does not in any way guarantee you will have the same results when used in your situation or with variables at your end. SAFE. HONEST SELLER- SEE OUR HIGH FEEDBACK AND BID WITH CONFIDENCE! PLACE HIGH BID EARLY or buy now(if available) ... moreAS MOST OUTBIDDING IS DONE IN THE LAST MINUTE! SEE OUR OTHER AUCTIONS AND STORE THERE MAY BE MORE OR DEALS YOU DID NOT THINK TO LOOK FOR. QUESTIONS: Ask all questions early as we are sometimes out of town a few days at a time and many weekends. We usually answer emails within a few days. Often the same day, but NOT ALWAYS, so if you are the impatient"instant messaging demanding" type of bidder, please do not bid. SHIPPING POLICY: Click on“shipping and payments tab” on this page and type in your zip code to find shipping cost or options available for this auction. UPS is insured and trackable. If US postal option is listed(small items only) We do NOT offer any insurance option on US postal. SHIPPING CHARGES ARE NOT NEGOTIABLE AFTER YOU BID OR MAKE OFFERS! we generally use only the shipping options shown. Do not bid and then ask us to change the price or method. We do NOT use 3 rd party or bill to account numbers. We do not have access to Fed EX. Combined shipping-large items not offered/ small items 50% off lowest rate for ea additional item won within 1 day or enter qty des
Hypertherm Max 43 Plasma Cutter w/ Torch 480v
This plasma cutter is in good shape and has been checked out by out local Airgas tech. Everything works as it should. Please look at the pictures closely. Again this is a 480v machine. I will only ship within the United States. I will do my best to answer any questions.
Hypertherm Powermax 600 Plasma Cutter Powermax 600 LOCAL PICK-UP ONLY!!
LOCAL PICK UP ONLY. CALL ME WITH ANY QUESTIONS. STUART(909)732-6924
Hypertherm Max100D Plasma Arc Cutter Cutting System w/ Hose and Gun MAX 100 D
Up for Bid is a Hypertherm Max100D Plasma Arc Cutter Cutting System w/ Hose and Gun! This is a 240v/ 3 Phase machine This plasma cutter is in good overall condition. With marks and other normal signs of use. Please take a loot at the pictures for more details. It was put in storage a couple years ago and hasn't been used since. But it was working perfectly the last time it was used, so I will provide a 14-day money back guarantee. In the last picture. You will see some boxes with a bunch of extra torch heads, fuses and other accessories. I can ship this to a Commercial address with forklift or loading dock for $190. If you need liftgate delivery. It will cost $30 extra. If you want it shipped to a Residential address, please contact me* Key Features: Fitted with Machine Torch Dual Gases or Air 32mm Severance Cut Recommended Production ... moreCut 16mm 30 to 100 amps 80% Duty at 100 amps Gouging 6.8kg per hour Hypertherm’s MAX100D is a dual-gas system designed for cutting most metals from gauge to 32 mm thick. In addition to hand cutting. It can be used with a machine torch and a THC-2 Torch Height Control system for highspeed mechanized cutting. The MAX100D provides continuously variable current output from 30 to 100 Amps for optimum performance on all thicknesses of metal up to 32 mm thick. This allows the operator wide variations in cutting speeds on the same thickness of metal. Two nozzle sizes(60-Amp and 100-Amp) provide high-quality cuts throughout its range of cut thicknesses. The system can also provide a continuous pilot arc which allows high-quality cutting of perforated or expanded metal without any appreciable deterioration in parts life. This feature is only available for use with the 60-Amp nozzle. The unique MAX100D power supply design uses transistor technology to produce a very smooth constant current DC output. Air can be used as the primary plasma gas. Providing low operating costs combined with high-speed performance. Cylinder air or shop air is acceptable as long as it is free of moisture, oil,
Hypertherm Powermax 30 Plasma Cutter Great Condition Used Twice
Like new HYPERTHERM POWERMAX 30. This unit used only twice for short cuts. Everything that comes with original kit included carrying strap, some expendables, manuals, CD, dual voltage pigtail for 120/240 Super nice cutter. That is Like New Bid with confidence. Thanks Posted with
Hypertherm Max100 Plasma Arc Cutter Cutting System w/ Hose and Gun MAX100
This sale is for(1) Hypertherm Plasma Cutting System. Model MAX100. It comes with the machine. The cord, and the gun. It has been used in our Anderson, SC shop where it is currently located. Local pick-up is preferred but we will ship if needed.
HYPERTHERM PLASMA CUTTER MACHINE TORCH FITS POWERMAX 1000 & 1250 etc.
Hypertherm machine torch for plasma cutter. Fits powermax 1000& 1250
LIKE BRAND NEW Hypertherm Powermax 45 Plasma Cutter PN: 088013 USED ONCE
Hypertherm Powermax 45 Plasma Cutter PN: 088013 Small size and light weight provide unmatched portability among 1/2" 12 mm) machines. Conical Flow™ increases arc energy density for superior cut quality with little dross. Pattened drag-cutting technology makes it easy to use- even for first-time operators. Boost Conditioner™ compensates for input voltage variations on 200- 240 V lines. Providing improved performance on low-line voltage, on motor generators and on fluctuating input power. CNC interface and FastConnect™ torch connection increase versatility for handheld and mechanized usage. Dual-angle design extends nozzle life and lowers operating cost. Powercool™ design cools internal components more effectively for greater system reliability and improved uptime. Standard system components Power supply T45v hand torch Extra consumables ... morefor cutting and gouging Work cable with clamp. 20' 6 m) Carry strap, Input Voltages(± 10% CSA 200– 240 V. 1-PH, 50-60 Hz Input Current@5.95 kW CSA 200/230 V. 1-PH, 34/28 A 230 V. 1-PH, 30 A Output current 20- 45 A Rated output voltage 132 VDC Duty cycle@ 40°C(104°F) CSA 50% 45 A. 200– 240 V, 1-PH 60% 41 A. 200– 240 V, 1-PH 100% 32 A. 200– 240 V, 1-PH Open circuit voltage(OCV) 275 VDC Dimensions with handles 16.75" 426 mm) D; 6.75" 172 mm) W; 13.7" 348 mm) H Weight with 20' 6.1 m) torch CSA 37 lbs(17 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure Cutting: 360 scfh; 6 cfm(170 l/min) 80 psi(5.5 bar) Gouging: 360 scfh; 6 cfm(170 l/min) 60 psi(4.1 bar) Input power cable length 10' 3 m) Power supply type Inverter- IGBT Engine-driven generator operation Engine Drive Rating(kW) System Output(amps) Performance(arc stretch) 8 45 Full 6 45 Limited 6 30 Full Cut Chart Material Thickness Current Maximum cut speed* inches mm amps ipm mm/min Mild Steel 10 GA 1/4 3/8 1/2 3/4 1 3 6 10 12 19 25 45 45 45 45 45 45 175 75 40 25 10 5 4445 1905 1016 635 254 127 Stainless Steel 10 GA 1/4 3/8 1/2 3/4 3 6 10 12 19
HyperTherm Powermax 800 Plasma Cutter 240/480 V
Is in great shape. It easily cuts 1/2 steel up to 1 inch. Runs on 240 1 phase or 480 3 phase. Setup for 240. Comes with lots of extra torch parts. Tips, ext. Shipping is included. I ONLY SHIP INSIDE THE USA.
hypertherm pac121p plasma cutter gun and cable torch cutter PARTS
hypertherm pac121p plasma cutter gun and cable torch cutter PARTS This is used but was working fine until the machine itself fried. This was tested on the other machine we had in the shop and the gun still worked fine. See photos. WISCONSIN RESIDENTS AND PICK UP SALES PAY 5.5% SALES TAX•FREE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA•CHECK OUT MY other items! My business is called Antique Rustler. I have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to wait for it to clear. I am a mechanic, explanation for the permanently dirty hands. ... moreI work 6 days a week and sometimes I have trouble making it to the post office I pay someone else to do my packing and try to ship as soon as I can. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you have any questions feel free to message me, I look forward to dealing with you! Powered by The free listing tool. List your items fast and easy and manage your active items.
HYPERTHERM POWERMAX 30 PLASMA CUTTER LIGHTWEIGHT PORTABLE
HYPERTHERM POWERMAX 30 PLASMA CUTTER LIGHTWEIGHT PORTABLE Items sold include what is described and pictured. Which from time to time may not include all the accessories included with the items original new purchase package. Our items are used and arrive in our hands with limited accessories. Up for auction is a HYPERTHERM POWERMAX 30 PLASMA CUTTER LIGHTWEIGHT PORTABLE. This plasma cutter is in good used condition with expected signs of wear and tear from use. This unit has been tested to the best of our abilities but has not been put under strenuous load by cutting for extended periods of time. This would be a great purchase for anyone who needs a mobile plasma cutter as this unit is lightweight and easy to move around. All items included in the auction are depicted in the photographs provided. If you are the winning bidder please include ... moreyour phone number on your PayPal payment so we can contact you directly with any questions regarding shipping. Thank you& happy bidding! This auction includes everything pictured unless mentioned otherwise- ¦: ¦: Another great auction from BIXBYSALES15210! ¦: ¦: CHECK OUT OUR FEEDBACK AND BID WITH CONFIDENCE. THANK YOU. Please do not hesitate to send me an email. A message through eBay, or give me a call@ 918-366-6000: M-F 10am-5pm central) with any questions you may have about this, or any of my other auctions! NORMAL OFFICE HOURS(CENTRAL TIME ZONE) MON-FRI 9- 5:30. SAT 10- 4:30 WE ARE NOT OPEN MOST FEDERAL HOLIDAYS. WE ARE NOT OPEN ON SUN. PLEASE ALLOW 24- 48 HOURS FOR EMAIL RESPONSE. International Shoppers Due to Paypal’s reluctance to accept any form of international shipping tracking confirmation numbers we can not at this time ship outside the United States! Payment PAYMENTS MUST BE MADE BY PAYPAL OR IN PERSON WITHIN 1 WEEK UNLESS ARRANGEMENTS ARE MADE BEFORE THE CLOSE OF THE AUCTION. IF IT WILL TAKE YOU LONGER THAN ONE WEEK TO PAY PLEASE CONTACT US BEFORE YOU BID! Local Pickup L OCAL PICKUPS ARE ALWAYS ALLOWED. BUT DON'T FORGET IF YOU PICK
Hypertherm Powermax 380 Plasma Cutter Power Max Plasma Cutting System
New Page 2 DESCRIPTION: You are bidding on a Hypertherm Powermax 380 Plasma Cutting System. PHYSICAL CONDITION: Used This item has the typical signs of use. Such as small marks, scratches, scuffs, etc. It is otherwise in good overall used condition. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: This item came from a working environment. We will guarantee it to work upon arrival. AUCTION INCLUDES: Hypertherm Powermax 380 ONLY as pictured. Auction items include only what is in the eBay picture(s) unless otherwise specified above. Including manuals, cables, cords, accessories, power supplies, etc. MODEL: Powermax 380 SN: xxx23115 D917 RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received ... moreas described. All returns must be authorized with an RMA# Items must be the original condition and be approved/received within specified timeframe. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded. SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere? Pay via cashiers check. o) Let's hope this does not occur. However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging materials and contact us within 2 business days of receipt of item. The flat rate listed is for delivery to the continental US only. Local Buyers may pick up items Mon- Fri between 9:00am and 4:00pm. Pay for the item in full first. Please, unless you are paying with cash
HYPERTHERM 65 PLASMA CUTTER 50FT TORCH LEAD NICE!
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. HYPERTHERM 65 PLASMA CUTTER 50FT TORCH ... moreLEAD NICE! We have a video above of the plasma cutter operating; press play. DESCRIPTION: ~ Up for bid is a good working Hypertherm 65 plasma cutter. It is about a year old and is still under warranty from being bought new. It has the 50ft torch lead option. Single phase powered. Original box is included. gsrx_vers_525(GS 6.6.5(525)
Hypertherm Max100 Portable Plasma Cutter Cutting System 1-1/4 Max Thickness
SKU: 640685 A: 0015000000EhsWB O: 0065000000OTd11 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Hypertherm Max100 Plasma Cutting System in good condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Hypertherm Model: Max100 Serial Number: 70-33049 Transport Weig ht: approx. 445 lbs. Transport Dimensions: L 48" x W 44" x H 43" Features/ Specifications: ... moreMaximum OCV: 280 VDC Output Current: 30-100 Amps Output Voltage: 150 VDC Duty Cycle Rating: 80% 15 KW Gas Type: Air. Nitrogen Gas Quality: Clean. Dry, oil free Gas Flow: 440 scfh Gas Inlet Pressure: 70 psi Gas Pressure Setting: 60 psi Resources: For more information on this unit including full specifications, view the manufacturer’s brochure(pdf) Condition: Unit is in good overall condition Working at time of decommission unit is untested by bidadoo Normal wear from previous use in working industrial environment See photos for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to mach
Hypertherm PowerMax 380 Plasma Cutter with Handheld Torch
Hypertherm PowerMax 380 Plasma Cutter. Used Part#070075 Recommended Cut up to 1/4" Max Cut 3/8" Severance up to 1/2" This listing is for a used unit. It has been checked out by our certified repair shop and is in good working condition. No factory warranty available) Includes machine. Power cable, work lead and torch. Good for most light and medium maintenance and repair jobs We are a Welding Supply company. That has been selling new and used equipment and supplies for over 40 years. If you want further information or have any questions. Please feel free to give us a call. Jodi 602-396-1178 or 602-252-0341 John 602 206-0571
Hypertherm Powermax 30 Plasma Cutter Great Condition with twist lock adapter
I have very nice Hypertherm Powermax 30 plasma cutter for your consideration. The machine is in excellent condition. It comes with everything in the picture. This machine cuts 1/4 steel like butter and severance cuts up to 1/2 inch.
Hypertherm Powermax 800 80 amp plasma cutter 1 or 3 phase NO TORCH
Selling a Hypertherm Powermax 800 Plasma cutter. 80 amp output. And according to websites this machine will cut 1 inch thick steel. We got this unit without a gun or torch, and therefore have no way to test it. So it is being sold as is with guarantee to work. It is quite versatile because it can run off of either single or three phase. The screws for the case appear to be factory, and dont appear to have been removed, which says their isnt much evidence of tampering. Who knows, maybe it works fine? Take advantage of our inability to test and get a good deal on this one! Standard flat rate 100 dollar shipping through ups. Look at the pictures for exact amperage and setting specifications. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED ... moreUP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
CNC Plasma Cutter,CYBERMATION, HVAC SOFTWARE, ESAB, Plasma Table, Hypertherm
Model– Cybermation 2200( GXAC 600) Serial– H70124 Specifications: Table Size 79” W x 176” L Maximum X Travel 73” Maximum Y Travel 163” Table Height 34” Equipped With: NO PLASMA Office Computer System with SCO Cybermation HVAC Software Downdraft Table MACHINE IS SOLD AS IS LOADED AS ONE PIECE WITH PC AND CONTROLS BANDED TO TOP OF TABLE. SOLD WITH NO RETURN OR REFUND, WAS UP AND RUNNING IN LOCAL SHOP AND THEY PURCHASED A NEW MACHINE AND KEPT THE POWER SUPPLY FOR HAN D APPLICATIONS. SHIPMENT: THIS WILL BE AN OVER WIDTH LOAD UNLESS DIS-ASSEMBLED! WILL DIS-ASSEMBLE AND BAND ON SKID TO SIT ON TABLE FOR $500.00 EXTRA
Hypertherm Powermax 190C Plasma Cutter Good working Condition
Description: BRAND: HYPERTHERM MODEL: POWERMAX 190C COMES WITH THE: UNIT AND EVERYTHING SEEN IN THE PICTURES ONLY In GOOD condition. Works great. Item shows normal wear with some scuffs and scratches. Comes as seen in pictures, so don't miss out on this great deal. REF:S TRX: B1689 EMAILS ARE ANSWERED THROUGH EBAY MESSAGE SYSTEM ONLY(We do not answer emails on Sunday’s) No International shipments Shipping: Our packing department pack items Mondays and Wednesdays and packages are sent out the following day. If payment is received after 10:30am PST on those days your item will be packed on the following packing day and sent out the following day. All larger items are sent out through FedEx Ground. No exceptions. All small items are sent out through U.S.P.S. Mail. All Video tapes, books, records, CDs, DVDs and magazines are sent out U.S.P.S. ... moreMedia Mail. Please Contact us through via eBay message system for Hawaii. Alaska, and Porto Rico Shipping quotes. Domestic Shipping and Handling charges are stated on auction page. We will not ship to APO addresses. Free Shipping" only applies to the continental USA Back To Top Warranty: All items come as stated in description and shown in picture(s) No Exceptions. Please read description carefully and see picture(s) Because that is what will be included in your auction. Ask all questions before bidding. Please do not assume an item is included with your auction if it is not listed in description or shown in picture(s) The items cosmetic and working condition is stated in description above. All Sales are FINAL. NO REFUNDS. Computers and Laptops: Any computers or laptops that are sold from us. Do not include an Operating System or any software. It is up to the buyer to provide an OS or software they might want on the computer or laptop. We sell used items so if an OS was previously installed. We consider that unwarranted. We do not know the history or legitimacy of any software or operating systems that might be on the computer or laptop. Any OS or software that is loade
HYPERTHERM POWERMAX 65 PLASMA CUTTER 083234
Hypertherm Powermax 65 Plasma Arc Cutting System P/N 083234 Hypertherm Powermax 65 hand plasma cutting system. Excellent condition- cuts up to 1" thick material at 10 inches per minute. A great machine at an outstanding price. Unit will ship by UPS- $35 freight to any location in the lower 48 states. Comes with hoses as pictured and instruction manual. Comes as is with no warranty. Message me if you have any questions and happy bidding! On Dec-18-13 at 14:54:26 PST. Seller added the following information: I believe this unit to be new. With out the packaging. There are no signs of use. Also upon inspecting further it is dated Oct/2013. See the photos yourself! Thank you!
Plasma Cutter, Hypertherm powermax800, plasma torch
For sale is this used Hypertherm Powermax800 Plasma Cutter. A top of the line cutter with heavy duty capabilities. Comes with power cord. 50' torch cable and torch, coiled compressor hose, cutting goggles, original owner's manual, and a box of various replacement tips and parts. Fully functional except for the switch in the back, which has been bypassed to remain on. INPUT: 208/240/480 VOLTS AC. SINGLE OR 3-PHASE, AMPS: 208- 50 OR 29. 240- 43 OR 25, 480- 25 OR 13 OUTPUT: 50 AMPS AT 120 VOLTS DC. 50% DUTY CYCLE, 440 AMPS AT 97 VOLTS DC. 100% DUTY CYCLE CUTTING CAPACITY: 3/4" 50 AMP 50% DUTY CYCLE WEIGHT: 65 POUNDS DIM: 11 X 24 X 20 INCHES OWNER'S MANUAL: The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage. Producing excellent cut and gouge quality on mild steel, stainless ... moresteel, aluminum and other metals. The Powermax800 power supply provides constant-current output variable from 20 to 50 amps, for optimum performance on all thicknesses of metal up to 1/2 inch(12 mm) thick. At 50 amps, the Powermax800 can cut metals up to 3/4 inch(20 mm) thick and will sever metals up to 1 inch(25 mm) thick.
HUGE 2011 MEGA HORNET 2000 CNC PLASMA CUTTER, HYPERTHERM 1600 AMPS + OXY-FUEL
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking HUGE 2011 MEGA HORNET 2000 CNC PLASMA CUTTER. HYPERTHERM 1600 AMPS + OXY-FUEL Ref# 151615 iammdna XCNCFC style="BACKGROUND-COLOR:00FFFF" MEGA HORNET 2000 PLASMA CUTTER W/OXY FUEL MACHINE style="BACKGROUND-COLOR:00FFFF" ... moreCOMPLETE WITH- 2 HYPERTHERM MODEL HPR800XD PLASMA UNITS- 1600 AMPS COMBINED style="BACKGROUND-COLOR:00FFFF" NEW 2011 CUTING ENVELOPE: X-AXIS. 480" Y-AXIS. 120" Z-AXIS. 9" POSITION ACCURACY. +/ 005" REPEATABILITY. +/ 001" BEVEL ENVELOPE: BEVEL TYPES. V. A, X, Y, K, AND GRADUAL. C-AXIS. 360 DEGREE ROTATION. B-AXIS. 90 DEGREE TILT +/ 45 DEGREES FROM NEUTRAL. BEVEL ACCURACY.Z-AXIS/ HEIGHT) +/ 005" C-AXIS/ ROTATE) +/ 50 DEGREE. B-AXIS/ TILT) +/ 50 DEGREE. OVERALL ACCURACY) +/ 1 DEGREE. REPEATABILITY) +/ 25 DEGREE. MACHINE LOAD CAPACITY: 365 LBS.SQ. FOOT TO 40 TON MAX. CRANE LIFTING CPAPCITY. EXAMPLES OF MATERIALS AND ACHIEVABLE PLASMA CUT THICKNESSES: MILD STEEL.PRODUCTION/ PIERCE) 2" SEVERANCE/ EDGE STARTS) 3.2" STAINLESS STEEL.PRODUCTION/ PIERCE) 3"
hypertherm plasma cutter Powermax 190c cables
Every things there for new leads but there used. Some comedic damage but in perfect working order.
Thermal Dynamics macine torch to fit Hypertherm plasma cutter, demo unit
Purchased with plug to fit Hypertherm 600 plasma cutting power supply. Used only once by company rep. to demo to us. Only selling because shortly after buying this we decided to buy complete plasma cutting cnc table. Comes with complete original consumables kit. In box, only one tip and one electrode have been installed and briefly cut with. Estimate less than 30 feet of cutting performed before deciding to jump into complete turnkey system. Was set up to run on"Buggo" track torch rail.
Plasma Cutter Ground Lead Lincoln Miller Hypertherm Thermal Dynamics Esab
This is for a good Used ground cable for a Plasma cutter. I do not know what size gauge the wire is but would be good for a light duty cutter. 12' Long. If you have any questions please call me 810-343-2781 Please check out my other equipment& Tools in my eBay store Price listed for shipping is to the lower 48 states only. Please ask for a quote in other areas or for international.
hypertherm hd 3070 plasma cutter
HD 3070 I recently remove from my cnc machine. plasma unit is 100amp and is a working unit. I also have some spare parts and cables. and have 30.50,70,100 amp tips that go with. if you have questions call mike at 217 417 5059 may ship item must call and set up
Hypertherm Powermax Model 800 80 Amp Plasma Cutter 1 or 3 Phase Free Shipping
YOU ARE BUYING A USED BUT IN GOOD WORKING ORDER Hypertherm Powermax Model 800 80 Amp Plasma Cutter. THIS UNIT IS 240V AND CAN BE WIRED FOR SINGLE OR THREE PHASE(CURRENTLY WIRED FOR SINGLE) THIS IS A COMPLETE UNIT READY TO WORK WITH THE GROUND CORD. TOUCH, PLUG AND A SPARE BOX OF TIPS. THIS IS A NICE UNIT THAT HAS NOT SEEN A LOT OF USE. SHIPPING WILL BE FREE TO THE LOWER 48 STATES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-143bc12eaed-0xd7-
HYPERTHERM MAX 100D PLASMA CUTTER, MACHINE TORCH + EXTRAS, CNC PLASMA CUTTER
HYPERTHERM MAX 100D PLASMA CUTTER& EXTRAS Condition: USED/ GOOD/ WITH MACHINE TORCH HYPERTHERM MAX 100D PLASMA CUTTER WITH MACHINE TORCH. FOR CNC PLASMA CUTTER 817-201-9908 Phone or Text is the quickest way to get a hold of me now. The Max 100D is one of the most common production plasma machines for CNC plasma cutting. If you know anything about these they are bullet proof plasma power sources. Consumables are cheap, multi gas, air, nitrogen or mix. Below is a actual users comment about the Max 100D I copied off a blog. I've had one for 12+ years already and use about 100 electrodes/nozzles yearly cutting plate on a cnc table. Never has let me down. You won't go wrong with it. The Max 100D is a 100 amp machine that will cut steel up to 32mm thick. It runs on a wide variety of gases such as dry shop air. Nitrogen, argon/hydrogen. ... moreIt's set up for a CNC plasma cutter application with machine torch& 50' sheilded leads. Also have the hand torch, user manual and about 600 dollars worth of all new genuine Hypertherm consumables. Tips, electrodes, nozzles, sheilds etc. It's a 220/ 440 volt. 3 phase machine, transformer based, this is the machine most production shops run. You can't blow it up like an inverter based machine. These will run day in and day out. They are bullet proof plasma machine for your CNC plasma you have or want to build. You can also convert the Max100D to fine plasma with one of ATC or American Torch Companies conversion kits. I have this listed as pick up only because I do not use Ebay's Freightquote service. Mainly because their carriers do not insure used items, I use YRC Freight only. Which does insure used items. If you need shipping call me and I can get a freight rate for you to a commercial location only. While your here check my other listings here as well. I've got a lot of stuff listed and I still need to make a trip out to the west coast. So if your along the way I could possibly deliever any large items for some added gas money. Call me& we
Thermal Dynamics plasma cutter, cutmaster 42,1-4200, Miller, Hypertherm
This is my Therma Dynamics Plasma cutter. Cutmaster 42. As with my welder for sale this machine has been used only a handfull of times. i have extra consumables and a extra tip shield, these parts alone were aditional 100$. this machine works with both 120 and 240V i never cranked this up to its full potential because i never had to.the thickest i cut was 3/8" stainless. and to say the least it was at half power. only selling because of financial distress from medical bills. I bought this new from Cyber weld.com for $1000. this unit was always covered and very well maintained with always dry filtered air. my reserve on this item is@ $700. expect shipping to be $50+ because of weight. thanks and good luck. I have other shop tools for sale including tig welder and auto welding helmet. Check out my other items! Thermal Dynamics® Cutmaster® ... more42 Plasma Cutter 1-4200 The Thermal Dynamics® Cutmaster® 42 Plasma Cutter is one of the most affordable. Highest quality 1/4" cutting capacity plasma systems available. The Cutmaster® 42 has the power to cut all day long at its recommended cutting capacity but gives you that extra cutting punch when you need it. The Cutmaster® 42 Plasma Cutter has the unique ability to crank out 27 amps of cutting power on 120 volt input and then jumps all the way up to 40 amps of cutting power when operating on 230 volt input power. Applications Auto Body/ Marine Repair Plumbing& HVAC Home Shop Rental Fleets Metal Building& Roofing Construction Features Industry leading 4-YEAR warranty The only plasma cutter in its class that provides increased output power when switching from 120 volt to 230 volt input. Competitively priced for the 1/4" 6mm) market. But with the cut capacity of a larger machine. Features the new SL40 torch. Based on the proven Surelok platform. Vent2Shield allows the use of considerably smaller air compressors compared to similar 40 amp plasma cutters. Greater cutting capacity than any 1/4" 6mm) plasma cutter. Cuts all da
HYPERTHERM PLASMA CUTTER PARTS PMX 900 MAIN PC TEST BOARD
UP FOR SALE IS A HYPERTHERM PMX 900 THAT WAS REPAIRED AND USED AS A TEST PC FOR A RETIRED FACTORY TRAINED MECHANIC. IT MAY NOT BE PRETTY BUT IT WORKS GOOD. COMES WITH A SERVICE MANUAL ALSO. NO RETURNS. ALSO SOLD ONLY TO A PAYPAL VERIFIED ADDRESS IN THE USA ONLY
HYPERTHERM POWERMAX 30 Handheld Portable Plasma Cutter System - *GOOD CONDITION*
HYPERTHERM POWERMAX 30 Handheld Portable Plasma Cutter System GOOD WORKING CONDITION- NO RESERVE AUCTION Don't let the small size fool you. The Powermax30 does the work of systems twice its size and weight. It efficiently cuts ¼" 6 mm) metal. Includes a shoulder strap for increased portability. Physical Condition: Good This plasma cutter is in good physical condition. It has some minor physical blemishes and shows normal use. Functional Condition: Excellent This plasma cutter is in excellent functional condition. It can perform all of its intended functions and everything is working perfectly. Specifications: Input Voltages: CSA: 120– 230 V. 1-PH, 50/60 Hz/ CE: 120– 230 V, 1-PH, 50/60 Hz Input Current@ 2.49 kW: CSA: 120– 230 V. 1-PH, 26– 13.5 A/ CE: 120– 230 V, 1-PH, 26– 13.5 A Output current: 15- 30 A Rated output voltage: ... more83 VDC Duty cycle@ 40°C(104°F) CSA: 50% 230 V/ 35% 120 V/ CE: 50% 230 V/ 35% 120 V Open circuit voltage(OCV) 240 VDC Dimensions with handles: 14.0" 356 mm) D; 6.6" 168 mm) W; 12.0" 305 mm) H Weight with 15' 4.5 m) torch: CSA: 20 lbs(9.7 kg) CE: 21 lbs(10 kg) Gas Supply: Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure: 240 scfh. 4 scfm(113 l/min) 80 psi(5.5 bar) Input power cable length: 10' 3 m) Power supply type: Inverter- IGBT If you have any questions about this plasma cutter please contact us. Dan's Equipment: At Dan's we provide customers with all sorts of technology both working and for repair. Most of our auctions are no reserve and start at 1 penny. Happy Bidding. Returns: We have a 100% product guarantee. Returns must be shipped back within 7 days of receiving item. Questions: If you have any questions about us or our items please ask and we will get back with you as soon as possible. 702713247
Hypertherm pac135t plasma cutter torch
Pac135t torch for a hypertherm plasma. Unknown condition. I have 2 available. This auction is for one.
Hypertherm t80 plasma cutter torch
T80 torch. Unknown condition you are buying it as is. I have no way to test it. I think it fits a 1000 and a 1250
Hypertherm Powermax 900 Plasma Cutter Factory Repair, Service Manual (Last One)
Factory repair and service manual for Hypertherm Powermax 900 plasma cutter with troubleshooting and wiring diagrams. Retiring Tech selling off my collection. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14437306c1b-0xe9-
Hypertherm powermax 900 50' long plasma cutter machine torch
50 foot long plasma machine torch. Was on a hypertherm powermax 900. Now I need to switch to a hand held torch. Check hypertherm website for machine compatability. Retails at almost $900 new, get slightly used and save a bunch of cash! Fast flat rate shipping via usps.
Hypertherm Max 100 Plasma Cutter with 25' Torch and 20' Ground + User Manual
Up for auction here is a Hypertherm Max 100 Plasma Cutter. Power 240-480 VAC 3 Phase. Included 25" Hand Torch with quick disconnect. 20' ground, Machine Manual. Unit works great with no issues whatsoever. Available for local pickup for free or I will palletize and ship via Conway motorfreight. I strongly dislike the new selling format ebay has adopted and contrary to whatever this listing says. I WILL GLADLY PALLETIZE AND SHIP ANYWHERE IN THE CONTINENTAL 48. I DO NOT SHIP INTERNATIONALLY. PLEASE. PLEASE DO NOT ASK! Actual shipping charges are the responsibility of the winning bidder. Unit weight 420 lbs. total. Thanks for checking out my auction! B. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1445754d3d0-0x111-
Hypertherm Powermax 1100 Plasma Cutter Service Manual
Service manual for Hypertherm Powermax 1100 plasma cutter.
Hypertherm MAX 42 Handheld Plasma Cutter Cutting Torch
Hypertherm MAX 42 You are bidding on one Used Hypertherm MAX 42 portable hand-held Air-Plasma Cutting Torch. The overall cosmetic condition of this item is fairly worn. Considering the nature of the equipment. There are burn-spots on it in many places, but these are not deep. There are no cracks or breaks on the case or the cables that we could see. Does not include the gun for the unit. We tested the unit out and found that it is not in working condition. We are not exactly sure why. Will be sold as-is. Please see pictures below for more information. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011 13833. Powered by
Hypertherm Max43 Plasma Cutter Service Manual
Service manual for Hypertherm Max43 plasma cutter.
Hypertherm t45v plasma cutter torch powermax 45
Condition unknown. I have no way to test. So you are buying as is. It looks to be in good shape. No cuts or burns on the lead.
Huge Lot Of Hypertherm Plasma Cutter Torch Parts Only
This is a big huge lot of new and used Hypertherm parts. I purchased a lot of torch and plasma cutter parts and this collection was in it. I'm not sure if the larger pieces or what looks like bearing caps are used with Hypertherm products or not. Everything is being sold used. As is and for parts or repair with no returns accepted. Do your homework before bidding. I'll do my best to answer questions if you have them. You will receive all the parts listed in the pictures Posted with
hypertherm HT 2000 LHF plasma cutter
Manufacturer: HYPERTHERM Description: HYPERTHERM HT2000L H F PLASMA CUTTER Capacity: Model Number: HT2000LHF This unit came from a closing business and I picked this up and gave it a thorough look over. I see nothing out of place or broken. It came right from a working facility and looks like it was well taken care of. These machines are in demand and this auction will not last long. If you have any other questions please ask! My Prices are not set in stone. If you do not like my price just make me an offer. You never know I might just accept it. Ships to US. Canada and Mexico via UPS. This can also be picked up locally. I will allow a 14 day return policy with a full refund for the item. Shipping cost will not be refunded and return costs are the buyers responsibility. As you can see from my feedback I go out of my way to make my customers ... morehappy and pride myself on that. If you have any questions at all please don't hesitate to ask. If you would like a freight quote please email me your zip code, let me know if it will be a commercial or residential delivery, and if you need a truck with a lift gate. I will prepare your item for shipping including palletizing, strapping it down, shrink-wrapping, and loading it on the carriers trailer for no additional charge. Free shipping within US with buy it now price. not with offer.
HYPERTHERM PLASMA CUTTER POWERMAX 30 PORTABLE MACHINE ~ 3/13 Receipt $1288!!!!!!
HYPERTHERM PLASMA CUTTER POWERMAX 30 PORTABLE HANDHELD MACHINE Up for auction is a very nice Hypertherm PowerMax 30 plasma cutter. This is in good used condition and comes with all the components pictured. This has been tested out and seems to work flawlessly and by the condition pictured is in good used condition with no signs of damage or abuse. Due to improper use potentially destroying this unit we will not be able to offer any returns. Please check out my other auctions I have listed as I will happily combine additional shipping at a discounted rate. Terms of Auction: ● Please use the pictures. Zoom& enlarge feature to verify the description. The item pictured is the item you will receive. ●If you have any questions about the pictures or description. Please ask before bidding. I will be happy to help in any way. ●Bidding starts at ... more99¢ and there is No Reserve on auctions ●In most instances we ship USPS Priority Mail or UPS Ground for our items. USPS& UPS upload tracking#s for each shipment. If you require expedited shipping. Insurance on package(s) or anything other special needs please contact me directly. We ship to the lower 48 states, for Alaska and Hawaii a surcharge may apply. As of now we do not ship internationally, eBay has a world wide shipping program but we only ship to US addresses! ●We will gladly combine shipping at discounted rates for those who purchase multiple items. Items must be purchased together within 3 days(unless other arrangements are made) Also the buyer MUST email me and notify me of multiple purchases after the first auction and before paying so that items may be packed properly to combine shipping costs. ●Payment must be made within 3 days of an auction as eBay's automatic unpaid item assistant opens an unpaid item case. ●Returns are only accepted if an item is not as described and 14 policy offered. Buyer is responsible for return shipping. Please let us know immediately if there is an issue so that we can resolve any issue. We are honest sellers and stand behi
Hypertherm Powermax 800 Plasma Cutter Service Manual
Service manual for Hypertherm Powermax 800 plasma cutter.
Hypertherm Powermax 600 Plasma Cutter Service Manual
Service manual for Hypertherm Powermax 600 plasma cutter.
Hypertherm Powermax 350 Plasma Cutter Service Manual
Service manual for Hypertherm Powermax 350 plasma cutter.
HYPERTHERM MAX100 PLASMA CUTTER 100 AMP
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 01141900005 Manufacturer: HYPERTHERM Description: HYPERTHERM MAX100 PLASMA CUTTER 100 AMP Capacity: 100 AMP Model Number: MAX100 Serial Number: Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE YOUR EMA
HYPERTHERM MAX200 PLASMA CUTTER 200 AMP
Plasma Cutter I am selling a Hypertherm Max 200 Plasma Cutter. Rated at 200 amps 3 phase. Unit is clean inside an out and ready for service. This unit retails new for about $15.000 The Max 200 is capable of cutting steel up to 2" in thickness. Stainless up to 1 1/2" and Aluminum up to 1 1/2" thick. Has CNC capabilities for precision cutting. But is not currently configured for that operation. Unit runs on 3 phase electric service only ranging from 40-200 amps@ 240- 480 V. Designed to provide 100% duty cycle for the best performance. The Max 200 is a heavy duty machine and ready to go to work if you have enough power to feed it. Comes with: 2- 47' water cooled torch heads[ PAC200T hand torches] 1- 23' ground lead 24' 3 phase electric cord with military style connector if needed[weighs about 100 pounds. No joke] Can ... morebe outfitted to work with CNC and automated controllers Unit was just recently serviced and gone through to check all systems for proper operation. Everything works great. Techs ran through the unit and test cut material at low and high amp ranges. Unit is heavy. Estimated@ 900 pounds, but does have skid mount base and a crane hook at top for easy loading. Remember, you need a 3-phase electric service to run this machine, house service is typically single phase, so it will not work at home. Because of the size and weight of this unit. Can be shipped using local pick-up or freight only. Freight class is 200. Rough estimate for shipping is about $1.000 but can change daily depending on final destination type]loading dock or residential] mileage and other factors. Use zip code 92020 for shipping quotes. That is where unit is currently located.
2006 Hypertherm MAX 200 Plasma Cutter
Hypertherm Model: MAX 200 Dual Gas system 240/ 480 Volts 3 phase 90/ 45 Amps Year of mfg: 2006 23' water cooled torch/ lead 23' ground/ clamp 3 phase/ approx. 23' service wire Applications: Steel. Stainless Steel, Aluminum Maximum cutting thickness: 2" 100% duty cycle This machine has had very limited use in a shop working in mostly lighter steel. Due to the much heavier capacity of the MAX 200. The machine mostly sat idle. Current Condition: Excellent Machine weight: 780 lbs Dimensions: 28" w x 41" d x 43" h Machine is crated for shipping Info: 802-558-2773 Freight Quote Available with C. H. Robinson Worldwide Shipping weight Approx. 850 lbs Preferred Payment options: Company Check(cleared) Wire Transfer, Certified Check. Paypal also accepted
HYPERTHERM PLASMA CUTTER POWERMAX 30 PORTABLE HANDHELD MACHINE 088003
THIS IS A NICE HYPERTHERM POWERMAX 30 PLASMA CUTTER COMES WITH EVERYTHING PICTURED COULDNT HAVE BEEN USED MORE THAN ONCE OR TWICE. ABSOLUTELY GREAT CONDITION PACKS INTO SOFT CARRY BAG TO MAKE IT PORTABLE. TORCH IS LIKE NEW. COMES WITH DIFFERENT POWER ADAPTERS 120/230V SINGLE PHASE IF YOU HAVE ANY QUESTIONS PLEASE ASK! Don't miss out on this one! After the au ction ends. You must call us after auction's end to pay by Visa or Master credit card we do NOT take online payments. paypal) Our hours of operation are Monday-Friday 9AM to 8PM central time only. You must call in order to pay for this item. Texas residents must pay 8.25% sales tax. We accept Visa and Master Card only. Shipping and handling for this item is $45.00. Insurance upon request. Feel free to ask any questions. No overseas bids. Mainland 48-states only. THANK YOU! A8062.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-1451b76fa74-0x109-
Hypertherm powermax 1250 g3 plasma cutter + EXTRAS!
Hypertherm powermax 1250 g3 plasma cutter this is a 80 amp unit good for cutting up to 1 1/2" steel this is a unit that is in very good condition comes complete with everything ready to go This unit is a multivoltage machine works from 208-575 volt single and three phase input power. Comes with custom Aluminum cart with new long sleeve welding gloves. New welding goggles with flip up lens. new magnet to hold your work. Magnetic level, New 25' tape measure, New slag hammer, striker, 2 new wax crayons,1 white wax keel with refill, 2 large clamps, 2 new red cable straps'you get every thing pictured here all the tools fit in the front tool box nice and neat. This is a three day no reserve auction starting out at a Low Low lo $1,200.00 WOW! thanks for veiwing
HYPERTHERM PLASMA CUTTER PARTS POWERMAX 1100 CONTROL PC BOARD
UP FOR SALE IS A USED HYPERTHERM POWERMAX 1100 CONTROL PC BOARD. IT WAS USED AS A TEST PC BY A RETIRED WELDER REPAIRMAN, GETTING RID OF TEST BOARDS DON'T USE THEM ANYMORE
Hypertherm plasma cutter powermax 1250 no cord or gun 3 phase power Local pickup
Used Hypertherm powermax 1250 plasma cutter. Gun and hose were stolen by an employee. It is wired for 3 phase power. Local pick up only. Item located in Chino. Ca. Please emial any questions you may have. Thank you for looking! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1454940f962-0x108-
CNC High Definition Hypertherm HPR130 Cutter & AKS Accu-Kut Plasma Table
This is a used AKS Accu-Kut along with Hypertherm power supply and controls. This auction is for: AKS Accu-Kut 5x10 table with water tray. Hypertherm EDGE Controller. Hypertherm HPR130 High Definition Plasma Cutter. Hypertherm Manual Control panel. Gas lines and wires. HPR130 consumables(I would estimate between $500 and $1000 worth) 8x20 metal shipping container. Table is of unknown year. I believe it's 1990's. The Hypertherm equipment is from 2004. This was purchased from a liquidator who got this from a defense contractor that had filed bankruptcy. I purchased it in it's current condition. About 8 months ago, out of storage, untested. I was told it was in working condition when it was stored. Due to not being able to put a power source to it, I have only been able to test one thing, the EDGE Controller, which powered on and ... moreworked just fine. Manuals are included, which contains the password for the EDGE Controller. When making offers/determining worth. Please consider the crate alone is worth roughly $1000. The Hypertherm HPR130 plasma cutter itself is worth roughly $30,000 new. I talked to Hypertherm about this and asked them what would be the most expensive component on it that could fail. Assuming everything was connected properly nothing should have failed. However the most expensive item on the HPR130 is a circuit board worth roughly $2500. Of course nothing here is new but this crate has some pretty expensive equipment inside of it. Shipping: A flatbed is recommended. The crate can be put directly on the flatbed and hauled away.
hypertherm powermax 1100 plasma cutter with 50ft torch 1in capacity
this is a very nice machine 1or3 phase very good shape will cut 1" material 50ft. torch is a huge option 7656670146
HYPERTHERM POWERMAX 45 PLASMA CUTTER METAL CUTTER FABRICATION
HYPERTHERM POWERMAX 45 PLASMA CUTTER METAL CUTTER FABRICATION Up for sale is a used but in great working condition Hypertherm Powermax 45 Plasma Cutter. These are pictures of the actual item up for sale. It has been tested and is fully functional. As you can see in the pictures its in great shape and you will not be disapointed. Free shipping to anywhere in the lower 48 states only. Alaska and Hawaii please email me for shipping cost. I will only ship to a Paypal confirmed address. Please review me feedback and bi d with confidence I will only ship to a confirmed address. I accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much for looking please click below to view my other qaulity tools. A confirmed address is your credit card billing address.NO local pickup available. ... moreThere is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Please Read Carefully We do not pay for parts of repairs. If you have a problem with an item please contact us. You have a 3 day inspection period if not happy simply send back for a full refund di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-145668b9503-0x10d-
HYPERTHERM POWERMAX 600 PLASMA CUTTER / GOOD WORKING & COSMETIC CONDITION {L@@K}
ATTENTION:THIS WILL SHIP{FREE} BUT. I WILL NOT SHIP TO THE STATE OF CA. or WA. or OR. as its just way to much, sorry I'M SELLING A HYPERTHERM POWERMAX 600, ITS IN GOOD WORKING CONDITION AND GOOD OVERALL CONDITION WITH THE EXCEPTION OF SOME MINOR MARKS/SCRATCHES FROM USE, THE UNIT HAS BEEN WELL TAKEN CARE OFF AND ONLY USED TO RESTORE SOME CARS, IT HAS A NEW GROUND CLAMP AS A PIECE OF METAL FELL ON IT AND BENT THE OLD ONE,IT ALSO HAS A NEWER CABLE/TORCH PROTECTOR ON IT AND IT COMES WITH A FEW ELECTRODES AND TIPS,ALL YOU WILL NEED IS SOME CLEAN DRY AIR AND A 220v ELECTRIC OUTLET, THIS HAS ALWAYS BEEN USED WITH A TRIPPLE AIR FILTER SYSTEM I HAVE ON MY COMPRESSOR, THIS UNIT WAS MAINLY A BACUP IF MY ESAB FAILED,SO IT HAS NOT BEEN USED ALL THAT MUCH,THE ONLY THING IT DOES NOT COME WITH IS THE AIR FITTING ON THE BACK AS I'M AFRAID IT WILL ... moreGET BROKEN OFF DURING SHIPPING, I PACK EVERYTHING EXTREMELY WELL. PLUS A DOWN LOADED MANUAL AS I CAN NOT FIND THE FACTORY ONE.AND THATS IT,NOTHING ELSE INCLUDED,THIS WILL SHIP FEDEX GROUND THE SAME OR FOLLOWING BUSINESS AND YOU WILL HAVE TO SIGN FOR IT PER PAYPAL RULES OF BEING OVER 250.00 AND I WILL ONLY SHIP TO A CONFIRMED PAYPAL ADRESS{ NO EXCEPTION} THERE ARE MANY PICTURES,LOOK AT THEM WELL AND MAKE SURE THIS IS WHAT YOU WANT AS THIS IS SOLD AS-IS WITH NO RETURNS,I'M GLAD TO ANSWER ANY QUESTIONS BEFORE AND AFTER YOUR PURCHASE.HYPERTHERM PLASMA CUTTERS ARE MADE IN THE USA AND ARE THE BEST ON THE MARKET,NOT DISPOSABLE LIKE THE CHINESE UNITS,I HATE TO SELL THIS BUY IT SITS MORE THAN IT USED,SO ITS TIME TO GO TO A NEW HOME. THE SPECS. BELOW ARE FROM HYPERTHERM SITE. Specifications Input Voltages. 208/240 V, 1 PH, 50/60 Hz, CSA Input Current@ 5.6 kW208/240 V, 1 PH: 46/40 Amps Output Voltage140 VDC Output CurrentAdjustable, To-40 Amps Duty Cycle50% 5.6 kW, 40°C(104°F) Dimensions20" 510 mm) D; 9.5" 240 mm) W; 17" 430 mm) H Weight with Torch 47 lbs(21 kg) Gas SupplyClean, dry, oil-free air or nitrogen Flow Rate360 scfh; 6 cfm(170 l/min) Flow Pressure72 p
Hypertherm PowerMax 600 plasma cutter low hours
I bought this cutter new. It has a date of May 2001 on it so I guess it was right around that time. I've used it very little; it probably has an hour of actual use on it. I have a'home shop' only and it has not seen commercial use or used my anyone but me. It works with no problems nor has it ever had any issues that needed fixing or looking into. It has spent its life on a cart underneath my TIG welder inside a climate controlled shop. It's a little dusty but has never seen outdoor use or been exposed to the elements. There are a few spare consumables included. Such tips/nozzles. The torch itself is the original piece, it is not shown but is included. Runs on 240v. single phase. Hypertherm still supports this model with parts and manuals. My memory is it is rated for 5/8" steel but please check their website for full ... moredetails. I will box this for free and ship it at actual FedEx Ground charges so you can disregard whatever Ebay's automatic calculator shows. Contiguous USA buyers only please.
Hypertherm Powermax Model 800 50 Amp Plasma Cutter 1 or 3 Phase POWERMAX800
Hypertherm Powermax Model 800 50 Amp Plasma Cutter 1 or 3 Phase Grab a GREAT Deal On a Pre-Owned Condition: This POWERMAX 800 is USED and shows signs of wear from regular use but. It is in Good Working Condition and is fully functional. There is a crack in the torch and some duct tape around the cord. I have noted both of these in the last 2 photos. Features: The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage. Producing excellent cut and gouge quality on mild steel, stainless steel, aluminum and other metals. The Powermax800 power supply provides constant-current output variable from 20 to 50 amps, for optimum performance on all thicknesses of metal up to 1/2 inch(12 mm) thick. At 50 amps, the Powermax800 can cut metals up to 3/4 inch(20 mm) thick and will sever metals up to 1 inch(25 ... moremm) thick. All Photos are of the actual item(s) you are bidding on. What you see is exactly what you will get. FREE SHIPPING Within The U.S. Feel Free To Contact me if you have any Questions before Bidding! Thanks for looking& Happy Bidding! W
Hypertherm Powermax 1000 Plasma Cutter W/ Cart & Circle Cutting Guide
Up for sale is(1) Hypertherm Powermax 1000 plasma cutter. Included is the cart. Circle cutter guide, misc. tips& water separator shown in pics. This machine was tested& is in good working condition. Please see Hypertherms website for specs. This machine is heavy so local pickup is recommended. Any shipping arrangements& costs are the buyers responsibility. Please email with any questions.
Hypertherm MAX42 Plasma Cutter, 40Amp, Used nice condition, Plasma Cutter, 1/2"
I have a Nice USED Hypertherm MAX42 40 Amp 1/2" capacity Plasma Cutter. I bought this New for $3100 and have used it in my home work shop. It will cut 1/2" steel and sever 5/8'3/4" I am to the point that I can't work in my shop anymore and some of these things will be sold. I love this Machine as it does not use HIGH FREQUENCY to Start or Maintain the Arc. You can cut Expanded Metal and just hold the trigger and go from wire to wire and it will keep cutting. A lot of the Plasma Cutters you have to pull the trigger to Re-Start the cut but not with this unit. This is an Inverter style unit and weighs like 47Lbs without the Torch. It has a 25 Ft Torch and about a 15-20ft. Ground cable. Included is a Hypertherm Support box of extra tips and nozzles etc. All is in the pictures. There are a couple of small breaks in the case ... moresince it is plastic. And one was a foot on the front when I first bought it and I JB welded it and it has been perfect. This is a Air Plasma Cutter so all you need is a air compressor and you need to make sure you air is Dry and there is a Moisture Seperator on the back of the unit and I always added another at my tank to make sure. If you get water into the tip when cutting it will mess up the Consumables pretty fast. There are a pretty good number of Tips included with the support Package. There was some repair done to the cable going to the torch which was a rubber cover that has been replaced and does not affect the operation of the unit. Like I said I am On Disability now and can not play in my shop anymore and I loved being able to zing a piece of Steel or Aluminum and be able to pick it up with a bare hand. I used a torch for years until I saw this work and just had to have one. Hypertherm is the BEST out there. Made to last. This unit may look a little rough compare to a new one but it probably only has a 100 hrs of actual cutting time on it. Only used to cut a hunk of metal for 30 seconds or a minute and turn it off. You don't take long to cut anything with one.