|
SHELL REAMER 2 5/8" CLEVELAND CARBIDE TIPPED RIGHT HAND CUT #7827
DESCRIPTION: SHELL REAMER 2 5/8" CLEVELAND CARBIDE TIPPED RIGHT HAND CUT 1 1/2" I.D. TAPERED HOLE USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we have experience in the metal working industry we dont know everything. Please ask questions. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition and we ... moremust be notified through eBay messages within 14 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
MACHINE REAMER 0.6935 BRAZED CARBIDE TIPPED #2 MORSE TAPER SHANK #7683
DESCRIPTION: MACHINE REAMER 0.6935 BRRAZED CARBIDE TIPPED#2 MORSE TAPER SHANK RIGHT HAND CUT ABOUT 9" LONG USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo
|
|
|
MACHINE REAMER 9,592 BRAZED CARBIDE TIPPED 3/8 X 5/16 #2 MORSE TAPER #7708
DESCRIPTION: MACHINE REAMER 0.502 BRAZED CARBIDE TIPPED PILOT 3/8 DIA X 5/16 LONG#2 MORSE TAPER SHANK RH CUT ABOUT 5 3/4" LONG USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do ... moreoffer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo
|
|
|
MACHINE REAMER 0.415 BRAZED CARBIDE TIPPED #2 MORSE TAPER SHANK LH HELIX #7706
DESCRIPTION: MACHINE REAMER 0.415 BRAZED CARBIDE TIPPED#2 MORSE TAPER SHANK LH HELIX RIGHT HAND CUT ABOUT 7" LONG USED BUT APPEARS TO BE IN FAIR SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money ... moreback refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com
|
|
|
.5020 Hannibal Carbide Tipped Chucking Reamer (my-ID-H1A)
Reamer is in good condition I combine shipping so shop for more in my Store and save. For my convenience I ship mostly flat rate boxes but if you think you can save by using another option let me know at time of purchase and I will do it as long as its within postal guidelines. If you have purchased and paid for multiple auctions and more shipping was paid for then I need to get your items to you I will issue a refund for any overage. Thanks for looking and Have a good day.
|
|
|
HANNIBAL CARBIDE EXPANSION CARBIDE TIPPED REAMER 1.0030
HANNIBAL CARBIDE EXPANSION CARBIDE TIPPED REAMER 1.0030 1-1/2" FLUTE LENGTH 10-1/2" OAL 7/8" SHANK
|
|
|
MACHINE REAMER 11/16 BRAZED CARBIDE TIPPED #2 MORSE TAPER SHANK 9" LONG #7682
DESCRIPTION: MACHINE REAMER 11/16 BRAZED CARBIDE TIPPED#2 MORSE TAPER SHANK ABOUT 9" LONG RIGHT HAND CUT USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we do have experience in the tooling industry. We do not know everything. Please ask any questions and we will find the answer together. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received ... moreback in its original condition and we must be notified through eBay messages within 14 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
USED JEWELL TOOL ABS40 1.7559" CARBIDE TIPPED REAMER (TiN Coated) USA
LISTING IS FOR A USED JEW ELL TOOL ABS40 CARBIDE TIPPED REAMER BRAND- JEWELL TOOL TECHNOLOGY MADE IN THE USA CARBIDE TIPPED REAMER DIAMET ER- 1.7559" FLUTE LENGTH- 875" COUPLER- ABS- 40 OAL- 3.487" TiN COATED REFERENCE# DK 131608 CONDITION- VERY GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLIC
|
|
|
LOT 3 PEERLESS STRAIGHT SHANK 1" CARBIDE TIPPED REAMER USA CHUCKING SPIRAL TAPER
Check out my other items! Be sure to add me to your favorites list! Item: TOP QUALITY USA MADE PEERLESS STRAIGHT SHANK EXPANSION REAMER Size: 1" OD X 1.5" LONG FLUTES AND 10" OAL Condition: GOOD. Note: WE ARE LIQUIDATING ALL OF OUR REAMERS. TAPER SHANK. STRAIGHT SHANK, EXPANSION, CHUCKING REAMERS, HAND REAMERS, CARBIDED TIPPED, DUAL SIZED, DRILL AND REAM COMBINATION, SPECIALTY REAMERS, SPIRAL FLUTES, TAPERED FLUTE, EXTRA LONG, STUBBY, RE-GRINDS, NEW ONES, ON SIZE, OVERSIZED, UNDER SIZED. MAYBE I CAN MAKE UP A SET FOR YOU? BUTTERSFIELD, UNION TWIST DRILL, CLEAVELAND TWIST DRILL, PEERLESS. PLEASE EMAILWITH SIZES YOU ARE LOOKING FOR AND I WILL TRY TO GET THEM LISTED FIRST. WILL COMBINE SHIPPING WITH OTHER ITEMS AND SHIP AS MUCH AS SAFELY POSSIBLE IN A USPS MEDIUM FLAT RATE BOX. QUESTIONS? email us with the eBay"ask a question" ... morelink above. PAYMENT: We accept PayPal or CASH at Pick Up. Purchaser to pay all shipping costs. Taxes and/or Border costs if applicable. SHIPPING: We strive to ship within 3 business days of receipt of cleared payment. We can provide skidding or crating at an additional charge…Please email for price. RETURNS: No returns.All items are sold as is-where is with no warranty expressed or implied. However. Items can be returned for refund of the auction bid in extreme cases only such as wrong item shipped. The item must be complete in the same condition it was shipped and returned within 30 days of our shipment. GENERAL TERMS: All items are subject to prior sale. We do not claim to be experts in all that we sell and it is assumed that the buyer is knowledgeable and proficient as to the use or condition of this type of equipment. Please ask questions before bidding. THANK YOU!
|
|
|
15MM REAMER BRAZED CARBIDE TIPPED #1 MORSE TAPER SHANK #7675
DESCRIPTION: 15MM REAMER BRAZED CARBIDE TIPPED#1 MORSE TAPER SHANK APPROX 181MM LONG RIGHT HAND CUT USED BUT APPEARS TO BE IN FAIR SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item ... moremust be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross
|
|
|
CARBIDE TIPPED 1-3/16" OD ADJUSTABLE REAMER 11" LONG H.S.S L@@K
REAMER H.S.S CARBIDE TIPPED 11" OVERALL BY 2" OF FLUTES 1-3/16" ADJUSTABLE. OD 1" TURNED DOWN TO 5/8" ON END. VERY SHARPE AND IN GOOD COND. REAMER SAYS L-1-531 L-7 IF YOU VIEW THE END YOU CAN SEE ITS CARBIDE TIPPED.
|
|
|
(#3483) Used Machinist 11/16 Straight Shank Carbide Tipped Reamer
Lot 3483 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3483) Used Machinist 11/16 Straight Shank Carbide Tipped Reamer You are bidding on a used. Manufactured by Lexington Cutting Tool Co. in the USA, straight shank, chucking reamer. Its features are: 6875 of an inch in diameter* Carbide Tipped* 6 straight flutes that are 2-1/4 inches in length* 9 inches in O.V.L. Has a 9/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this in a padded envelope by first class mail. I try to ship within 48 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday ... moremorning! Buyer responsible for shipping Approx. shipping Wt 13 OZS. Thank You for Looking!
|
|
|
USED RE-TIPPED SHARP CARBIDE TIPPED STRAIGHT SHANK CHUCKING REAMER 1.0005"
LISTING IS FO R A RE-TIPPED CARBIDE TIPPED CHUCKING RE AMER BRAND- RTW DIAMETER- 1.0005" FLUTE LENGTH- 1.50" OAL- 3. 875" SHANK- 750" 8-FLUTES STRAIGHT FLU TE RIGHT HAND CUT SMALL CHAMFER AT CUTTING EDGE CON DIT ION- GOOD USED RE A M ER HAS BEEN RE-TIPPED REAMER IS SHARP! LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A ... moreCOURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT T
|
|
|
19/32" Expandable Carbide Tipped Reamer Actual Size (.590)
Selling 19/32" Expandable Carbide Tipped Reamer Actual Size(590) Reamer is used but in great shape. It has been sharpen in the past and its ready to be used. the Od. has No wear. It is 8" long with 7/16" dia. shank. Will process your order the very first day after your payment clears. I know your needs! ASAP! WILL SHIP TO LOWER 48 US STATE. Thank you for your order. Note: If for any reason you don't like what you receive just let me know before you ship it back to me in an unused state and you will get your money back. You pay for return shipping.
|
|
|
(1) METCUT 11/16"CARBIDE TIPPED W/ COOLENT HOLES STRAIGHT CHUCKING REAMER # 1083
1) METCUT KENNAMETAL- IPG 11/16"CARBIDE TIPPED W/ COOLENT HOLES STRAIGHT CHUCKING REAMER MFG# N-9101-CRO.6875 DIA# 1083. PLEASE EMAIL ME IF YOU HAVE ANY QUESTIONS. WE WILL COMBINE SHIPPING IF YOU ARE BIDDING ON ANOTHER ITEM. EMAIL US AND WE WILL SEND YOU ONE INVOICE. OKLAHOMA RESIDENTS WILL HAVE SALES TAX OF 8.725% PAYMENT IS EXPECTED WITHIN 2 WORKING DAYS. PLEASE READ THE FULL DESCRIPTION OF THE ITEM THAT IS LISTED. IF YOU LEAVE ME FEEDBACK I WILL LEAVE YOU FEEDBACK. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
(#3592) Used Machinist Carbide Tipped .8585 Inch Straight Shank Chucking Reamer
Lot 3592 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3592) Used Machinist Carbide Tipped.8585 Inch Straight Shank Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, carbide tipped chucking reamer. Its features are: 8585 of an inch in diameter* Carbide Tipped* 6 straight flutes that are 2-1/2 inches in length* 8-3/4 inches in O.V.L. Has a 3/4 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt 1 LBS. Thank You for Looking!
|
|
|
(#3593) Used Machinist 1.192 Carbide Tipped Shop Made Stubby Reamer
Lot 3593 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3593) Used Machinist 1.192 Carbide Tipped Shop Made Stubby Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, shop made stubby carbide tipped chucking reamer. Its features are: 1.192 of an inch in diameter* Carbide tipped* 8 straight flutes that are 3 inches in length* 7-3/8 inches in O.V.L. Has a 1 inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt 1-3/4 LBS. Thank You for Looking!
|
|
|
(#3584) Used Machinist 1-1/4 Inch Carbide Tipped Expansion Reamer
Lot 3584 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3584) Used Machinist 1-1/4 Inch Carbide Tipped Expansion Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, adjustable expansion reamer. This type of reamer adjusts allowing you to ream both over and under sized holes, and also allows the reamer to be resharpened when it becomes worn, thus saving on tooling cost. Its features are: 1.250 of an inch in diameter* Carbide Tipped* 8 straight flutes that are 1-3/4 inches in length* 11-1/2 inches in O.V.L. Has a 1 inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship ... morethis item by priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. shipping Wt 2-1/2 LBS. Thank You for Looking!
|
|
|
(#3589) Used Machinist Carbide Tipped 1 Inch Straight Shank Chucking Reamer
Lot 3589 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3589) Used Machinist Carbide Tipped 1 Inch Straight Shank Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, carbide tipped chucking reamer. Its features are: 1.000 of an inch in diameter* Carbide Tipped* 8 straight flutes that are 2-3/4 inches in length* 10-1/2 inches in O.V.L. Has a 7/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt 1-3/4 LBS. Thank You for Looking!
|
|
|
(#3587) Used Machinist 1.064 Carbide Tipped Shop Made Stubby Reamer
Lot 3587 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3587) Used Machinist 1.064 Carbide Tipped Shop Made Stubby Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, shop made stubby carbide tipped chucking reamer. Its features are: 1.064 of an inch in diameter* Carbide tipped* 8 straight flutes that are 2-3/4 inches in length* 7 inches in O.V.L. Has a 7/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday ... moremorning! Buyer responsible for shipping Approx. shipping Wt 1-1/4 LBS. Thank You for Looking! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f9de33e52-0x105-
|
|
|
(#3591) Used Machinist Carbide Tipped 15/16 Inch Straight Shank Chucking Reamer
Lot 3591 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3591) Used Machinist Carbide Tipped 15/16 Inch Straight Shank Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, carbide tipped chucking reamer. Its features are: 9375 of an inch in diameter* Carbide Tipped* 8 straight flutes that are 2-1/2 inches in length* 9-7/8 inches in O.V.L. Has a 3/4 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday ... moremorning! Buyer responsible for shipping Approx. shipping Wt 1-1/4 LBS. Thank You for Looking!
|
|
|
(#3585) Used Machinist 7/8 Inch Carbide Tipped Expansion Reamer
Lot 3585 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3585) Used Machinist 7/8 Inch Carbide Tipped Expansion Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, adjustable expansion reamer. This type of reamer adjusts allowing you to ream both over and under sized holes, and also allows the reamer to be resharpened when it becomes worn, thus saving on tooling cost. Its features are: 875 of an inch in diameter* Carbide Tipped* 6 straight flutes that are 1-1/2 inches in length* 10 inches in O.V.L. 3/4 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this ... moreitem by priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. shipping Wt 1-1/4 LBS. Thank You for Looking!
|
|
|
(#3590) Used Machinist Carbide Tipped 1 Inch Straight Shank Chucking Reamer
Lot 3590 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3590) Used Machinist Carbide Tipped 1 Inch Straight Shank Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, carbide tipped chucking reamer. Its features are: 1.000 of an inch in diameter* Carbide Tipped* 8 straight flutes that are 2-3/4 inches in length* 10-1/2 inches in O.V.L. Has a 7/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt 1-3/4 LBS. Thank You for Looking!
|
|
|
Melcut J-63331 Chucking Step Drill Reamer Carbide Tipped Made In Ireland
Melcut J-63331 Chucking Step Drill Reamer Carbide Tipped Made In Ireland J-63331 Reamer Carbide Tipped They do have a little wear. We do not know the purpose of this tool. Please take a look at all pictures. What you see in the pictures is what you will receive. Thank You
|
|
|
Durapoint 0.9398" Carbide Tipped Reamer 2067-2-10Z
Durapoint 0.9398" Carbide Tipped Reamer 2067-2-10Z Quantity Available: 1 Shipping Weight: 1 lbs. ADZ174 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and ... moreis an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Pl
|
|
|
Durapoint 0.462" Carbide Tipped Reamer PT-89126
Durapoint 0.462" Carbide Tipped Reamer PT-89126 Quantity Available: 1 Shipping Weight: 1 lbs. ADZ173 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is ... morean additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Pleas
|
|
|
PAHL Tool .1840" Diameter Carbide Tipped Reamer PT-91663
PAHL Tool.1840" Diameter Carbide Tipped Reamer PT-91663 Model: PT-91663 10" Overall Length Quantity Available: 7 Shipping Weight: 1 lbs. ADZ167 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. ... moreThis is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regardi
|
|
|
USED CARBIDE TIPPED SHELL REAMER 1.720"+/- (For use w/ #8 shell reamer arbor)
LISTING IS FOR A USED HSS SHELL REAMER BRAND- SIZE- 1.720" +/ Size is approximate FLUTE LENGTH- 2.375" ARBOR HOLE SIZE- 1.00" FOR USE WITH SHELL REAMER ARBOR SIZE#8(ARBOR IS NOT INCLUDED) CARBIDE TIPPED STRAIGHT FLUTE RIGHT HAND CUT CONDITION- GOOD USED. NEEDS RESHARPENED A FEW CHIPS ON CARBIDE Normal 0 Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) ... morePLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME.
|
|
|
USED KARSON TAPER SHANK CARBIDE TIPPED CHUCKING REAMER 1.953"+/- (#4MT-Shank)
LISTING IS FOR A USED TAPER SHANK CARBIDE TIPPED CHUCKING REAMER BRAND- KARSON PART# L-84529-C SIZE- 1.953" SIZE IS APPROXIMATE SHANK- 4MT 8-FLUTES STRAIGHT FLUTE RIGHT HAND CUT CONDITION- GOOD USED A CHIP ON ONE BLADE LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS ... moreOF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU
|
|
|
Expansion Chucking Reamer 9/16 Straight Flute 4" OAL Carbide Tipped USA
Expansion Chucking Reamer 9/16 Straight Flute 4" OAL Carbide Tipped USA Expansion Chucking Reamers are size renewable. After reamer is worn undersize. The end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use. They are not ajustable reamers. I can't guarantee size. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.75. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Expansion Chucking Reamer 1/2 Straight Flute 5" OAL Carbide Tipped USA
Expansion Chucking Reamer 1/2 Straight Flute 5" OAL Carbide Tipped USA Expansion Chucking Reamers are size renewable. After reamer is worn undersize. The end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use. They are not ajustable reamers. I can't guarantee size. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.75. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Expansion Chucking Reamer 7/16 Straight Flute 5" OAL Carbide Tipped USA
Expansion Chucking Reamer 7/16 Straight Flute 5" OAL Carbide Tipped USA Expansion Chucking Reamers are size renewable. After reamer is worn undersize. The end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use. They are not ajustable reamers. I can't guarantee size. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.75. to see more reamer listings. Powered by SixBit's eCommerce Solution di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-140efb2c68a-0x101-
|
|
|
Expansion Chucking Reamer 3/8 Straight Flute 7" OAL Carbide Tipped USA
Expansion Chucking Reamer 3/8 Straight Flute 7" OAL Carbide Tipped USA Expansion Chucking Reamers are size renewable. After reamer is worn undersize. The end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use. They are not ajustable reamers. I can't guarantee size. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.50. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Chucking Reamer Carbide Tipped .4375 Straight Flute 5-1/2" OAL USA
Chucking Reamer Carbide Tipped.4375 Straight Flute 5-1/2" OAL USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.50. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
(#3691) Used Machinist Carbide Tipped 1-7/8 inch Shell Reamer
Lot 3691 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3691) Used Machinist Carbide Tipped 1-7/8 inch Shell Reamer You are bidding on a used. With no manufacturer’s markings on it, straight flute shell reamer. Its features are: 1.875 inch in diameter* Carbide Tipped* 10 Straight flutes that are 2-3/4 inches in length* 3-1/2 inches in O.V.L* Uses a No.8 Arbor I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item in a small flat rate priority box. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. ... moreshipping Wt 1-1/2 LBS. Thank You for Looking!
|
|
|
7/8" (.875) Dia. Carbide Tipped Reamer
Up for auct ion a used(very little) carbide tipped reamer with a 3/4" 750 dia. shank& 7/8" 875) flute dia. O.A.L. = 10 inches Flute length = 2 5/8" Length of carbide on tip of flutes = 7/8" long. This reamer is in like new condition with very. Very little use. Good sharp cutting edge. No returns! I only ship to United States to P aypal co nfirmed address! Accept Paypal payment only! Thanks For Looking& Happy Bidding!
|
|
|
DURAPOINT PRECISION CARBIDE TIPPED REAMER - 15/16" DIAMETER
aims DURAPOINT PRECISION CARBIDE TIPPED REAMER- 15/16" DIAMETER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Durapoint. This is a Carbide Tipped HSS Reamer in Good Condition. Specifications: Reamer Size: 15/16" Shank Size: 3/4" Length of Cut: 2-1/2" Overall Length: 10" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DURAPOINT PRECISION CARBIDE TIPPED REAMER- 15/16" DIAMETER Reliable Tool Inc. c 2011 | Powered by
|
|
|
HANNIBAL CARBIDE TIPPED EXPANSION REAMER 1.7504
HANNIBAL CARBIDE TIPPED EXPANSION REAMER 1.7504 1 1/4" SHANK
|
|
|
3.167" carbide tipped diameter large reamer
For auction is large reamer. Approx 3.167" diameter. Carbide tipped. 5 morse taper shank. A few small chips in the end but in otherwise very good condition. 17" oal.3" flute length. 3" body dia.Will combine shipping on other items.
|
|
|
USED HANNIBAL CARBIDE TIPPED 1.250" CHUCKING REAMER 1-1/4" (1"Shank)
LISTING IS FOR A USED CARBIDE TIPPED CHUCKING REAMER BRAND- HANNIBAL CARBIDE SIZE- 1.250" FLUTE LENGTH- 3.00" OAL- 7.250" SHANK- 1.00" RIGHT HAND CUT RIGHT HAND SPIRAL 8-FLUTE CONDITION- GOOD USED MAY NEED RESHARPENED SOME SMALL NICKS ON CARBIDE TIPS Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WI
|
|
|
Chucking Reamer Carbide Tipped .5505 Straight Flute 4-1/2" OAL HSS USA
Chucking Reamer Carbide Tipped.5505 Straight Flute 4-1/2" OAL HSS USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.75. to see more reamer listings. Powered by SixBit's eCommerce Solution lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-143b3801733-0xf6-
|
|
|
Chucking Reamer Carbide Tipped .562 Straight Flute 6" OAL HSS USA
Chucking Reamer Carbide Tipped.562 Straight Flute 6" OAL HSS USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.75. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Chucking Reamer Carbide Tipped .4062 Straight Flute 7" OAL HSS USA
Chucking Reamer Carbide Tipped.4062 Straight Flute 7" OAL HSS USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.25. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Extended Shank Carbide Tipped Chucking Reamer .560 Straight Flute 15" OAL USA
Extended Shank Carbide Tipped Chucking Reamer.560 Straight Flute 15" OAL USA These reamers have had the shank extended in the shop. They are in good usable condition. I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $4.00. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Carbide Tipped Chucking Reamer .930 Straight Flute 6-1/2" OAL USA
Carbide Tipped Chucking Reamer.930 Straight Flute 6-1/2" OAL USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS Priority Mail Small Flat Rate Box and cost $5.80. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Expansion Chucking Reamer 21/32 Straight Flute 5-1/2" OAL Carbide Tipped USA
Expansion Chucking Reamer 21/32 Straight Flute 5-1/2" OAL Carbide Tipped USA Expansion Chucking Reamers are size renewable. After reamer is worn undersize. The end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use. They are not ajustable reamers. I can't guarantee size. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $3.00. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
(#4076) Used Machinist Carbide Tipped .876 Inch Chucking Reamer
Lot 4076 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4076) Used Machinist Carbide Tipped.876 Inch Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 876 of an inch in diameter* Carbide Tipped* 6 straight flutes that are 2-5/8 inches in length* 10 inches in O.V.L. Has 3/4 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping ... moreApprox. shipping Wt. 1-1/4 LBS. Thank You for Looking!
|
|
|
(#4069) Used Machinist Carbide Tipped 1.381 Inch Chucking Reamer
Lot 4069 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4069) Used Machinist Carbide Tipped 1.381 Inch Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 1.381 of an inch in diameter* Carbide Tipped* 8 straight flutes that are 3-1/4 inches in length* 12 inches in O.V.L. Has 1 inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. ... moreshipping Wt. 3 LBS. Thank You for Looking!
|
|
|
(#4071) Used Machinist Carbide Tipped PF 28mm Straight Shank Chucking Reamer
Lot 4071 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4071) Used Machinist Carbide Tipped PF 28mm Straight Shank Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 1.101 of an inch in diameter* Carbide Tipped* 8 spiral flutes that are 3 inches in length* 11 inches in O.V.L. Has 1 inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping ... moreApprox. shipping Wt. 2-1/2 LBS. Thank You for Looking!
|
|
|
Carbide Tipped Chamber Reamer
Clymer 38-55 Chamber reamer finisher. Used Once excellent condition. Posted with
|
|
|
3/4" Straight Fluted Reamer Carbide Tipped Morse Taper #2 Shank MT2 2MT
Welcome! Up for sale is a 3/4" Straight Fluted Reamer Carbide Tipped Morse Taper#2 Shank MT2 2MT. Used in good condition. Feel free to email any questions! SCT2773
|
|
|
KOMET Dihart 30.890mm Carbide Tipped Reamer Head Z340.380310C0053
KOMET Dihart 30.890mm Carbide Tipped Reamer Z340.380310C0053. This item is manufacturer refurbished and comes as shown. Will ship out one day after receipt of payment.
|
|
|
RPT USA 11/16" Carbide Tipped Expansion Reamer
RPT USA 11/16" Carbide Tipped Expansion Reamer 9.0" OAL. 9/16" Shank. Very Good Condition Questions? Call Robert at 607-259-5615 RLS4-D1-R7 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1442d2478ce-0xf7-
|
|
|
USED CJT DURAPOINT CARBIDE TIPPED STEP REAMER .996"+/- x 1.250" (1"-Shank)
LISTING IS FOR A USED CARBIDE TIPPED STEP CHUCKING REAMER BRAND: CJT DURAPOINT MINOR DIAMETER: 996" SIZE IS APPROXIMATE MAJOR DIAMETER: 1.250" ONLY THE.996" SIZE IS CARBIDE TIPPED THE 1.250" SIZE IS HSS FLUTE LENGTH- 5.00" OAL- 7.750" SHANK- 1.00" RIGHT HAND CUT STRAIGHT FLUTE 8-FLUTE CONDITION- GOOD USED NEEDS RESHARPENED OR RETIPPED ON FIRST STEP A FEW CHIPS ON CARBIDE TIPS Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT ... moreTHE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF IT
|
|
|
Cleveland 1 1/2" Carbide Tipped Adjustable Reamer
Cleveland 1 1/2" Carbide Tipped Adjustable Reamer. 11 1/2" long with.937 diameter shank. With 5 extra carbide tipped blades. Used condition. Shipping is free to lower 48. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-144446cfd2c-0xfe-
|
|
|
NICE!!! DURAPOINT #05325 CARBIDE-TIPPED REAMER - 7/8' DIAMETER
Made by Durapoint in the U.S.A. This is a Used Carbide-Tipped Reamer in Excellent Condition! Cutting Diameter: 7/8" Length of Cut: 2-5/8" Shank: Reduced- 5/8" Overall Length: 9-1/2" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14453f3ab40-0x115-
|
|
|
Chucking Reamer Carbide Tipped .5265 Straight Flute 4" OAL HSS USA
Chucking Reamer Carbide Tipped.5265 Straight Flute 4" OAL HSS USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $3.75. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Chucking Reamer Carbide Tipped .5625 Straight Flute 8" OAL HSS USA
Chucking Reamer Carbide Tipped.5625 Straight Flute 8" OAL HSS USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS First Class Mail and cost $2.75. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Chucking Reamer Carbide Tipped 1.000 Straight Flute 10" OAL HSS USA
Chucking Reamer Carbide Tipped 1.000 Straight Flute 10" OAL HSS USA I can't guarantee size. I will use the size marked on the item if available or measure the item if not. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS Priority Mail and cost $11.00. to see more reamer listings. Powered by SixBit's eCommerce Solution
|
|
|
Reamer Cleveland .4415 inch Carbide tipped tappered shank
Welcome to my NO reserve auction. You are considering a Cleveland.4415 inch reamers. In good used condition. Please check out my for other machinist related items! Seller prefers Paypal but will accept a Postal m/o or personal check. Item shipped when personal check clears. Item must be paid for within 5 days of auction end. I guarantee you will like this item! If not just send it back in the same condition and same packaging. Please feel free to check my feedback. I reserve the right to change carriers or service without notice. Questions? Call Rob at 585-305-8418. Good luck!
|
|
|
CARBIDE TIPPED EXPANSION REAMER 9/16" Straight Shank 11/16" Diam. machinist tool
Used Expansion Reamer Mfg Not Marked 9/16" Straight Shank 11/16" Diameter Carbide Tipped Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144a017254b-0x104-
|
|
|
USED WENDT SONIS USA CARBIDE TIPPED STRAIGHT SHANK 1-1/8" CHUCKING REAMER 1.125"
LISTIN G IS FOR A USED CARBIDE TIPPED CH UCKING REAMER BRAND: WENDT SONIS MADE IN THE USA DIAMETER- 1.125" FLUTE LENGTH- 2.875" OAL- 11.00" SHANK- 875" RI GHT HAND SPIRAL RIGHT HAND CUT 8-FLUTES CONDITION- WELL USED NEEDS RESHARPENED OR RE-TIPPED SOME NICKS ON FLUTES ONE FLUTE HAS BEEN CHIPPED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE ... moreCALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled
|
|
|
USA Carbide Tipped 1.500" Shell Reamer and No. 7 Arbor #3 Morse Taper
USA Carbide Tipped 1.500" Shell Reamer and No. 7 Arbor#3 Morse Taper Questions? Call Robert at 607-259-5615 I will combine shipping where possible NU2-D11 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
HANNIBAL HSS CARBIDE TIPPED 1-1/2" STRAIGHT SHANK REAMER
Carbide Tipped Reamer Lot Includes: Hannibal 1-1/2" Dia x 2-1/4" Cut x 12-1/2" OAL W/ Protective case No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the ... morenext business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
(#4184) Used Machinist 17/32 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4184 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4184) Used Machinist 17/32 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 5312 of an inch in diameter* Carbide tipped* 6 straight flutes that are 2 inches in length* 8 inches in O.V.L. Has 3/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 7 OZS. Thank You for Looking!
|
|
|
(#4185) Used Machinist .600 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4185 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4185) Used Machinist.600 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 600 of an inch in diameter* Carbide tipped* 6 spiral flutes that are 2-1/4 inches in length* 6 inches in O.V.L. Has 9/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 8 OZS. Thank You for Looking!
|
|
|
(#4183) Used Machinist 7/16 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4183 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4183) Used Machinist 7/16 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 437 of an inch in diameter* Carbide tipped* 4 straight flutes that are 1-3/4 inches in length* 7 inches in O.V.L. Has 3/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 5 OZS. Thank You for Looking!
|
|
|
(#4193) Used Machinist SF 32mm Carbide Tipped Straight Shank Reamer
Lot 4193 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4193) Used Machinist SF 32mm Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 1.260 of an inch in diameter* Carbide tipped* 8 straight flutes that are 3 inches in length* 11-1/2 inches in O.V.L. Has 1 inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping ... moreApprox. shipping Wt.2-1/2 LBS. Thank You for Looking!
|
|
|
(#4191) Used Machinist .769 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4191 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4191) Used Machinist.769 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 769 of an inch in diameter* Carbide tipped* 6 straight flutes that are 2-1/2 inches in length* 9-1/2 inches in O.V.L. Has 5/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 13 OZS. Thank You for Looking!
|
|
|
(#4186) Used Machinist .600 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4186 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4186) Used Machinist.600 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 600 of an inch in diameter* Carbide tipped* 6 spiral flutes that are 2-1/4 inches in length* 6 inches in O.V.L. Has 9/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 8 OZS. Thank You for Looking!
|
|
|
(#4192) Used Machinist .999 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4192 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4192) Used Machinist.999 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 999 of an inch in diameter* Carbide tipped* 8 straight flutes that are 2-3/4 inches in length* 10-1/2 inches in O.V.L. Has 7/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt.1-3/4 LBS. Thank You for Looking!
|
|
|
(#4182) Used Machinist 15/32 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4182 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4182) Used Machinist 15/32 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 4688 of an inch in diameter* Carbide tipped* 4 straight flutes that are 1-3/4 inches in length* 7 inches in O.V.L. Has 3/8 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 5 OZS. Thank You for Looking!
|
|
|
(#4188) Used Machinist 5/8 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4188 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4188) Used Machinist 5/8 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 625 of an inch in diameter* Carbide tipped* 6 straight flutes that are 2-1/4 inches in length* 9 inches in O.V.L. Has 9/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 12 OZS. Thank You for Looking!
|
|
|
(#4187) Used Machinist 5/8 of an Inch Carbide Tipped Straight Shank Reamer
Lot 4187 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4187) Used Machinist 5/8 of an Inch Carbide Tipped Straight Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank, chucking reamer. Its features are: 625 of an inch in diameter* Carbide tipped* 6 straight flutes that are 2-1/4 inches in length* 9 inches in O.V.L. Has 9/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 12 OZS. Thank You for Looking!
|
|
|
1.449 straight shank carbide tipped reamer
1.449 carbide tipped straight shank reamer.12 inch overall,3 1/4 flute,1 1/4 shank dia. Listed as used because a little of the plastic was missing on cutter and a couple of marks in the shank,overall really good shape.
|
|
|
(#4217) Used Machinist 1.370 Inch Carbide Tipped Chucking Reamer
Lot 4217 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4217) Used Machinist 1.370 Inch Carbide Tipped Chucking Reamer You are bidding on a used. Manufactured by Rock River Cutting Tool Co. in the USA, straight shank carbide tipped chucking reamer. Its features are: 1.370 of an inch in diameter* Carbide tipped* 8 straight flutes that are 3-1/4 inches in length* 12 inches in O.V.L. Has a 1 inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt. 3 LBS. Thank You for Looking!
|
|
|
RESHARPENED HANNIBAL USA 23/32" CARBIDE TIPPED EXPANSION REAMER .7187"
LISTING IS FOR A RESHARPENED CARBIDE TIPPED EXPANSION REAMER BRAND: HANNIBAL CARBIDE MADE IN THE USA DIAMETER: 23/32" FLUTE LENGTH: 1.250" OAL: 9.00" SHANK: 562" 6-FLUTE RIGHT HAND CUT STRAIGHT FLUTE CONDITION: GOOD USED REAMER HAS BEEN RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WIT
|
|
|
(#4205) Used Machinist Stubby Style .525 Carbide Tipped Chucking Reamer
Lot 4205 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4205) Used Machinist Stubby Style.525 Carbide Tipped Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank stubby carbide tipped chucking reamer. Its features are: 525 of an inch in diameter* Carbide Tipped* 6 straight flutes that are 2 inches in length* 5 inches in O.V.L. Has a 7/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt. 6 OZS. Thank You for Looking!
|
|
|
NICE! HANNIBAL CARBIDE-TIPPED 6-FLUTE CHUCKING REAMER - 55/64" DIAMETER
Made by Hannibal Carbide This is a Used Carbide-Tipped Reamer in Great Condition. Specifications: Diameter: 55/64" Flute Length: 2-1/2" Shank: 3/4" Overall Length: 10" All Items come as seen in pictures. Don't forget to look at And if you have any questions. Please don't hesitate to Email me at socaltools527@gmail.com Terms and Conditions. Once a bid has been placed. It is a legally binding contract of purchase Payment must be received within 3 working days of purchase. However if this is not possible, please let us know to discuss solutions. If payment is not received within 7 days of purchase then a Non Paying Buyer Dispute will be filed. And 10 days later a final fee credit lodged You will be notified on the day that your goods have been despatched via e-mail Once you receive your goods. Please inspect them ... morefor any damage during transit, and report the said damage within 24hrs via e-mail. If all is well please leave feedback, so we are aware that you have received your goods. Please note that if there are any problems. Contact us first via e-mail giving full details of any problem along with your user ID,
|
|
|
NICE! CARBIDE-TIPPED 6-FLUTE CHUCKING REAMER - .6140" DIAMETER
This is a Used Carbide-Tipped Reamer in Great Condition. Specifications: Diameter: 6140" Flute Length: 2-1/4" Shank: 9/16" Overall Length: 7" All Items come as seen in pictures. Don't forget to look at And if you have any questions. Please don't hesitate to Email me at socaltools527@gmail.com Terms and Conditions. Once a bid has been placed. It is a legally binding contract of purchase Payment must be received within 3 working days of purchase. However if this is not possible, please let us know to discuss solutions. If payment is not received within 7 days of purchase then a Non Paying Buyer Dispute will be filed. And 10 days later a final fee credit lodged You will be notified on the day that your goods have been despatched via e-mail Once you receive your goods. Please inspect them for any damage during transit, ... moreand report the said damage within 24hrs via e-mail. If all is well please leave feedback, so we are aware that you have received your goods. Please note that if there are any problems. Contact us first via e-mail giving full details of any problem along with your user ID,
|
|
|
(#4232) Used Machinist .627 Carbide Tipped Chucking Reamer
Lot 4232 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4232) Used Machinist.627 Carbide Tipped Chucking Reamer You are bidding on a used. With no manufacturer’s markings on it, straight shank chucking reamer. Its features are: 627 of an inch in diameter* Carbide Tipped* 6 straight flutes that are 2-1/4 inches in length* 9 inches in O.V.L. Has a 9/16 of an inch in diameter shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping ... moreApprox. shipping Wt. 11 OZS. Thank You for Looking!
|
|
|
PROTO-CUTTER .3220" CARBIDE-TIPPED COOLANT FED REAMER w/ 3/8" SHANK
Made by Proto-Cutter. This is a Carbide-Tipped Coolant Fed Reamer in good condition. SPECIFICATIONS: Cutter Diameter: 3220" Shank Diameter: 3/8" Flute Length: 1/2" Flutes: 6 Overall Length: 3" Comes exactly as shown in pictures
|
|
|
(#4312) Used Machinist USA Made 1.001 Inch Carbide Tipped Chucking Reamer
Lot 4312 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4312) Used Machinist USA Made 1.001 Inch Carbide Tipped Chucking Reamer You are bidding on a used. Manufactured by CTP Cutting Tool Co. in the USA, straight shank chucking reamer. Its features are: 1.001 of an inch in diameter* Carbide Tipped* 8 straight flutes that are 2-3/4 inches in length* 10-1/2 inches in O.V.L. Has a 7/8 of an inch in diameter shank. I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! ... moreBuyer responsible for shipping Approx. shipping Wt. 1-3/4 LBS. Thank You for Looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14563e63605-0x110-
|
|
|
(#4311) Used Machinist USA Made 1-3/8 Inch Carbide Tipped Chucking Reamer
Lot 4311 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4311) Used Machinist USA Made 1-3/8 Inch Carbide Tipped Chucking Reamer You are bidding on a used. Manufactured by Cleveland Twist Drill Co. in the USA, straight shank chucking reamer. Its features are: 1.375 of an inch in diameter* Carbide Tipped* 8 spiral flutes that are 3 inches in length* 12 inches in O.V.L. Has a 1 inch in diameter shank. I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt. 3 LBS. Thank You for Looking! g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14563e633a9-0x10d-
|
|
|
(#4337) Used Machinist 1” Carbide Tipped MT Shank Expansion Reamer
Lot 4337 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4337) Used Machinist 1” Carbide Tipped MT Shank Expansion Reamer You are bidding on a used. With no manufacturer’s markings on it, Morse taper shank expansion reamer. Its features are: 1.00 of an inch in diameter* High speed steel* 8 straight flutes that are 1-5/8 inches in length* 10-1/2 inches in O.V.L. Has a No.3 Morse Taper shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping ... moreApprox. shipping Wt 1-1/2 LBS. Thank You for Looking!
|
|