|
Universal Series A Spade Drill Bit Inserts 1 1/4" HSS
Universal Series A Spade Drill Bit Inserts 1 1/4" HSS Material: HSS Size: 1 1/4 Thickness: 3/16 Locating Area: 3/4 Series: B. AMEC equivalent: 10214-0108. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. On Jan-01-13 at 08:01:39 PST. Seller added the following information:
|
|
|
Niagara Cutter A187, 92407 1-1/4" HSS EndMill LD=5.211 (May require sharpening)
This is a Used Niagara Cutter A187. 92407, 1-1/4" HSS EndMill LD=5.211(May require sharpening) Guaranteed not to be DOA. F or replacement or refund within 14 days of receiving. Item is sold as-pictured. Please ask any questions before your bid. Be as specific as possible. Shipping We ship items once payment is received. We ship USPS Priority mail with delivery confirmation. USPS First Class mail and UPS Ground. P lease note: We combine shipping. The cost of combined shipping depends on weight. Location of buyer and size of box. Large orders will require UPS shipping. If you purchase multiple auctions please wait to be invoiced before paying. International shipping: We will ship worldwide. Please remember your item must go through customs which can delay receiving your item in a timely manner. We will not mark your item as a gift or pay ... moreany customs fees. Any and all extra fees incurred for international shipping are the responsibility of the buyer. All used items are sold as is and are non-returnable. So please be sure before purchasing the item. WE WILL NOT SHIP TO UNCONFIRMED ADDRESSES. WE WILL ONLY SHIP TO THE ADDRESS SPECIFIED ON YOUR PAYPAL ACCOUNT AS THE SHIP TO ADDRESS. THE ONLY EXCEPTION IS IF THE ADDRESS CHANGE IS IN THE SAME COUNTRY AND WE ARE PROVIDED WRITTEN CONFIRMATION OF THE NEW ADDRESS THOUGH EBAY. NO VERBAL CONFIRMATION WILL BE ACCEPTED; THIS MUST BE IN WRITING. Michigan State Sales Tax All Michigan customers are subject to Michigan State Sales tax of(6.0% regardless if the item is shipped or picked up. Return Policy We offer 14 day money back guarantee if you receive a item that does not match our auction description and you contact us within 7 days from the closing date of the auction. If you receive an item that you are not happy with we will refund the auction less shipping and a 10% restocking fee. Please note. When we sell used merchandise it will be listed in auction as“USED” and therefore All Sales will be final. Returns must be received within 14 days from closing date of the auctio
|
|
|
USED HSS 3/4" x 90° HSS COUNTERSINK .750" 6-FLUTE (1/2"-Shank) YUGOSLAVIA
LISTING IS FOR A USED HSS COUNTERSINK MADE IN YUGOSLAVIA SIZE- 3/4" ANGLE- 90 ° SHANK- 500" OAL- 2.50" 6-FLUTE CONDITION- GOOD USED MA Y NEED RESHARPENED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, ... moreMASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL D
|
|
|
6 KEO HSS COUNTERSINKS - 3/4" - 82
aims 6 KEO HSS COUNTERSINKS- 3/4" 82 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Keo These are 6 used HSS Countersinks in good condition. Specifications: Cutting Diameters: 3/4- 82 Degrees. Shanks: 1/2" Overall Lengths: 2-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 6 KEO HSS COUNTERSINKS- 3/4" 82 Reliable Tool Inc. c 2011 | Powered by
|
|
|
49/64" HSS SILVER & DEMi DRILL BIT 1/2 SHANK & Bottom Tap 4 Flutes 7/8" T-382
I bought these in September 2012 to drill and tap two(2) holes in cast iron on my tractor. The original threads got stripped so had to go with larger bolt size. Includes the drill and tap. NO RESERVE
|
|
|
Pipe STI Taps Heli-Coil 1/2-14 inch 5FL 1-3/8 Overall 3-1/4" Plug HSS
This auction is for a used Heli-coil tap for putting in a 1/2" NPT insert Tap was only used once. These retail for over $100 Brand. Heli-Coil. Thread Size(Inch) 1/2-14, Thread Standard, NPT, Finish/Coating, Bright, Chamfer, Plug, Number of Flutes, 5, Overall Length(Inch) 3-1/4, Thread Length(Inch) 1-3/8, Shank Diameter(Decimal Inch) 0.9063, Square Size(Decimal Inch) 0.6790, Material, High Speed Steel,
|
|
|
NIAGARA CUTTER 33905 1" Dia END MILL LD=4 .190 C290 HSS USA Used
NIAGARA CUTTER 33905 1" Dia END MILL LD=4.190 C290 HSS USA Used This items is from my uncle. He is retired I know nothing about this much. We have only one. Then Sell As Is
|
|
|
3/4" Straight Shank HSS - Counterbore - Metal Working - Machinist Tools
Up for auction is a 3/4" Straight Shank HSS These tools w as acquired previously owned at our store. Cos metically they show normal sig ns of previous use. Used to enlarge an existing hole or hide a screwhead The only items contained in this auction are what is described above and what you see in the photographs.if it is not in the pictures then it does not come with the auction. Please see photographs for more detail and feel free to email with specific questions. Valued customers. Please be aware that the Item Specifics section is automatically provided by eBay. These details are sometimes incorrect! ALWAYS confirm information of the specifications critical to you. Thank you! Buy with confidence! Please take a moment to read our auction policies: Customer Service Policies If you cannot complete the payment transaction please do not ... morebid on the item. Items have a fourteen(14) day from confirmed receipt of goods return policy unless otherwise stated. This means you have fourteen(14) days from confirmed receipt(FedEx or USPS time stamp) to let us know you are not happy! ALL INTERNATIONAL BIDDERS MUST CONTACT US FOR A SHIPPING QUOTE PRIOR TO BIDDING We will not. Under any circumstance, honor our return policy if it is stated in the item description that the item is being sold"AS IS" No exceptions to this policy will be considered. Our return policy will also not be honored in instances of"Buyer's remorse" The return policy will. However, be gladly honored if the item is not as described. We do our best to describe every item accurately, but have been known to make mistakes! We will be more than happy to leave feedback after a Buyer’s feedback has been posted. Office Hours are between 10 a.m. and 6 p.m. Mountain Time(Phoenix. Arizona) Monday through Friday(excluding major Holidays) Our email is checked frequently. Response time almost always occurs within 24 hours(excluding most Holidays and weekends) Please be patient. As some of your questions may take some time to answer based upon our
|
|
|
KEO! - 6 COMBINATION CENTER DRILLS HSS #7 X 90� X 3-1/4"
aims KEO! 6 COMBINATION CENTER DRILLS HSS#7 X 90� X 3-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by KEO. These are 6 Precision HSS Center Drills in GREAT condition. Specifications: Cutting Diameters: 7. Angle: 90�. Overall Lengths: 3-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KEO! 6 COMBINATION CENTER DRILLS HSS#7 X 90� X 3-1/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
3 USED TiN COATED HSS #7 T-A AMEC SPADE BLADE INSERTS 3-29/32", 3-3/4", 3-3/4"
LISTING IS FOR 3 USED AMEC HSS#7 T-A SPADE BLADE INSERTS BRAND- AMEC SERIES- 7 T-A BLADE THICKNESS- 7/16" TiN COATED SIZES INCLUDED IN LOT: 3-29/32" 137T-0329) 3-3/4" 137T-0324) 3-3/4" 137T-0324) CONDITION- GOOD USED SOME SPOTS OF SURFACE RUST BLADES NEED RESHA RPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT ... moreOPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR
|
|
|
5 USED HSS #5 T-A AMEC SPADE INSERTS 2-29/32, 70mm, 2-15/16, 2-3/4, 2-13/16
LISTING IS FOR 5 USED AMEC HSS#5 T-A SPADE BLADE INSERTS BRAND- AMEC SERIES- 5 T-A BLADE THICKNESS- 7/16" TiN COATED SIZES INCLUDED IN LOT: 2-29/32" 135T-0229) 70.00mm(135T-70) 2-15/16" 135T-0230) 2-3/4" 135T-0224) 2-13/16" 135T-0226) CONDITION- GOOD USED SOME SPOTS OF SURFACE RUST BLADES NEED RESHA RPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 ... morePM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. too
|
|
|
USED SPOT DRILL 3/4" X 1" SHANK 8-1/2" OAL X 4-1/2" NECK LENGTH HSS USA 349
YOU ARE BIDDING ON ONE USED SPOT DRILL 3/4" X 1" SHANK 8-1/2" OAL X 4-1/2" NECK LENGTH HSS USA 90 DEGREE POINT DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED HSS SPADE DRILL HOLDER WITH A 3/4" SHANK AND 10 SPADE HEADS FREE SHIPPING
GOOD USED SPADE DRILL HOLDER WITH A 3/4" SHANK 8" OVERALL LENGTH. COMES WITH A NEW 1 11/16" HEAD-4 PCS 1 15/32" USED HEADS-4 PCS 1 3/8" USED HEADS-1 PC 1 1/2" USED HEAD DIAMETER HIGH SPEED STEEL SPADE BIT USA MADE. FREE SHIPPING IN THE USA. THANKS KENNY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f0b98cd36-0x102-
|
|
|
Niagara 1 1/4 87402 HSS LD=7.239 F1 1" Deep Tin Coated End Mill 6 Flute
Niagara 1 1/4 87402 HSS LD=7.239 F1 1" Deep Tin Coated End Mill 6 Flute Used- Good Condition- No Box- See Photos For Details- Will Be Shipped Safe& Fast- All Photos/ Scans Are Taken Of Actual Item I Am Selling& You Will Recive So Buy With Confidence- Customer Service Is Our#1 Goal
|
|
|
10 PRECISION HSS DRILLS - 3/4" TO 1"
aims 10 PRECISION HSS DRILLS- 3/4" TO 1" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 10 HSS Drills in good condition. Specifications: Drill Sizes Range: 3/4" to 1" Shanks: Straight Length of Cut Range: 5-1/2" to 7-1/2" OAL Range: 11" to 11-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 PRECISION HSS DRILLS- 3/4" TO 1" Reliable Tool Inc. c 2011 | Powered by
|
|
|
25/32" dia x 17 1/2" L x 5 3/4" Flute Lenght HSS Drill Made in USA
25/32" diam x 7 1/2" L x 5 3/4" Flute Length HSS Drill Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721N-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
63/64" dia x 11" L x 6 1/4" Flute Lenght HSS Drill Made in USA
63/64" diam x 11" L x 6 1/4" Flute Length HSS Drill Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721Z-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
37/64" dia x 8 3/4" L x 6 1/2" Flute Lenght HSS Drill Made in USA
37/64" diam x 8 3/4" L x 6 1/2" Flute Length HSS Drill Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721A-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
21/32" dia x 7 1/4" L x 5" Flute Lenght HSS Drill Made in USA
21/32" diam x 7 1/4" L x 5" Flute Length HSS Drill Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721G-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
21/32" dia x 9" L x 6 3/4" Flute Lenght HSS Drill Made in USA
21/32" diam x 9" L x 6 3/4" Flute Length HSS Drill Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721E-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
41/64" dia x 16 1/4" L x 3" Flute Lenght HSS Drill Made in USA
41/64" diam x 16 1/4" L x 3" Flute Length HSS Drill Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721CC-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f9821e899-0x107-
|
|
|
1 3/4" dia x 15" L x 8" Flute Lenght HSS Drill Made in USA #5 Morse Taper
1 3/4" diam x 15" L x 8" Flute Length HSS Drill#5 Morse Taper Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721-8-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
1 29/64" dia x 15" L x 9" Flute Lenght HSS Drill Made in USA #4 Morse Taper
1 29/64" diam x 15" L x 9" Flute Length HSS Drill#4 Morse Taper Made in USA Contact John Kwapich@ 314.398.7414 with any questions ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721-7-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
17/32" dia x 6 1/2" L x 4 1/2" Flute Lenght HSS Drill Made in USA
17/32" diam x 6 1/2" L x 4 1/2" Flute Length HSS Drill Made in USA ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3721-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.
|
|
|
1-13/64" HSS 1" Shank Reduced Drill Bit, 4-3/4" Drill Length, 2-1/4" Shank Lg'th
1-13/64" HSS 1" Shank Reduced Drill Bit. 4-3/4" Drill Length, 2-1/4" Shank Length Used. Very sharp. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f9b1c5903-0x107-
|
|
|
CLEVELAND HEAVY DUTY HSS DRILL W/ 5MT SHANK - 2-1/4"
aims CLEVELAND HEAVY DUTY HSS DRILL W/ 5MT SHANK- 2-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Cleveland. This is a Heavy Duty HSS Drill in good condition. Specifications: Size: 2-1/4" Shanks: Morse Taper#5. Length of Cut: 7-1/2" Flute Geometry: 2 Flute. Overall Length: 16" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEVELAND HEAVY DUTY HSS DRILL W/ 5MT SHANK- 2-1/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
RESHARPENED WAUKESHA HSS UNIVERSAL SPADE BLADE DRILL INSERT Series "E" 2-3/4"
LISTING IS FOR A RESHARPENED HSS SPADE BLADE DRILL INSERT BRAND- WAUKESHA SIZE- 2-3/4" SERIES"E" THICKNESS- 4375" LENGTH- 2.139" CONDITION- VERY GOOD USED BLADE HAS BEEN PROFESSIONALLY RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION ... moreEND. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS
|
|
|
0.257" x 6 1/4" HSS Sprial Drill 9pc lot
0.257" x 6 1/4" HSS Spiral Drills(9 pc lot) ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3766-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
4 STANDARD AND OTHER HSS DRILLS - 1-3/8", 1-5/16" & 1-7/16"
aims 4 STANDARD AND OTHER HSS DRILLS- 1-3/8" 1-5/16" 1-7/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Standard and other manufacturers. These are 4 HSS Drills in good condition. Specifications: Sizes: 1-3/8" 2) 1-5/16" 1-7/16" Shanks: 1-1/4" Lengths of Cut: 2-1/2" 2-3/4" 3-1/4" 3-1/2" Overall Lengths: 6-3/4" 7-1/4" 2) 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 4 STANDARD AND OTHER HSS DRILLS- 1-3/8" 1-5/16" 1-7/16" ... moreReliable Tool Inc. c 2011 | Powered by
|
|
|
1 17/32" diam x 10" long HSS Drill with #4 Morse Taper
1 17/32" diam x 10" long HSS drill With#4 Morse Taper ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3784-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13fa475efde-0xfc-
|
|
|
1 7/32" diam x 8" long HSS Drill with #4 Morse Taper
1 7/32" diam x 8" long HSS drill With#4 Morse Taper ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3781-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
1 3/32" diam x 8" long HSS Drill with #4 Morse Taper
1 3/32" diam x 8" long HSS drill With#4 Morse Taper ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3780-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
1 5/8" diam x 5" long HSS Drill with #4 Morse Taper
1 5/8" diam x 5" long HSS drill With#4 Morse Taper ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3778-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
2 1/4" diam x 7" long HSS Drill with #6 Morse Taper
2 1/4" diam x 7" long HSS drill With#6 Morse Taper ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3777-H THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
PTD Stub Length, 1-1/2" HSS Drill Bit w/ 1-1/4" Reduced Shank ----others listed
PTD Stub Length. 1-1/2" HSS Drill Bit w/ 1-1/4" Reduced Shank-others listed, Click to View Image Album Picture is of 3 drill bits. All being listed tonight, but you are only being offered the smallest in the photo a 1-1/2" PTD drill. It appears to be unused but has had the shank notched so I can't list it as new. It would sell at MSC for $192.66. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand ... morealone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the shipping
|
|
|
LOT OF KEO & OTHER HSS CENTER DRILLS - #4-1/2 TO #10
aims LOT OF KEO& OTHER HSS CENTER DRILLS- 4-1/2 TO#10 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Keo& other manufacturers. This is a Lot of HSS Center Drills in good condition. Specifications: Sizes: 4-1/2 to#10. Overall Lengths Range: 2-1/2" to 3-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF KEO& OTHER HSS CENTER DRILLS- 4-1/2 TO#10 Reliable Tool Inc. c 2011 | Powered by
|
|
|
LOT OF CLEVELAND AND OTHERS HSS IN EXT. DRILLS #3, #4, & #21
aims LOT OF CLEVELAND AND OTHERS HSS IN EXT. DRILLS#3. 4, 21 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Cleveland and Other Manufacturers. This is a Lot of used HSS Drills in good condition. Specifications: Drill Sizes: 3. 4, 21. Lengths of Cut: 2-1/4" Overall Lengths Range: 12" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF CLEVELAND AND OTHERS HSS IN EXT. DRILLS#3. 4, 21 Reliable Tool Inc. c 2011 | Powered by
|
|
|
13/32 HSS Double End Mill Bit 4 Flute - 4" Long End To End
13/32 HSS Double End Mill Bit 4 Flute- 4" Long End To End Used- Good Condition- See Photos for Details- Will Be Shipped Safe& Fast- All Photos/ Scans Are Taken Of Actual Item I Am Selling& You Will Receive So Buy With Confidence- Customer Service Is Our#1 Goal?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13fd96f5a53-0xf4-
|
|
|
3/4" dia x 1/2" Shank x 6" Lenght HSS Drill Made in USA
3/4" dia x 1/2" Shank x 6" Lenght HSS Drill Made in USA ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 3231-28 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
10 pc Lot of HSS Flat Bottom Drills with #2 and 4 Morse Tapers
10 pc Lot of HSS Drills with#2 and#4 Morse Tapers from 5/8" diam to 1 9/32" diam ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3231-92 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
M.A. FORD COUNTERSINK 3/4" SHANK 2" DIA. AIRCRAFT HSS 3 FLT 60 DEGREES
LAO 4- 1/4. I do combine purchases.
|
|
|
Poland Core Drill 1.1/4 HSS
This is a used but in excellent condition Poland 1.1/4 HSS Core Drill. 5-215-215 Poland 5/2. Taper shank/4 flute, ARBB 1.1/4 HSS. Thanks for taking a look and please take a look at my other listings.
|
|
|
LOT OF 10 TRIUMPH HSS DRILL BITS 1/4" T1B 11216
The package was originally 12 pieces and two were used. The rest are excellent. I will combine purchases.
|
|
|
LOT OF 15 HSS COUNTER BORES SIZES RANGE 1/4" TO 3/8" #300 CMC
Lot of 15 Counter Bores Sizes Range: 1/4" to 3/8" 300 Brands Include: CMC& Others Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
LOT OF 4 INDEXABLE END MILLS W/ HSS SPIRAL STEEL INSERTS VALENITE
Nice Lot of 4 Valenite Indexable End Mills w/ Inserts Lot Includes(2) 2" Spiral Indexable End Mills 4-7/8" Overall Length. 1" Straight Shank(2) Valenite VMG-100 RH 1" Spiral Indexable End Mills 4-1/8" Overall Length. 1" Straight Shank Includes 8 Unused HSS Spiral Steel Inserts Shipping Weight is 8 lbs Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. Note for international buyers. Weight limits for flat rate boxes are as follows: Small 4 lbs. Medium/Large 20 lbs If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
COUNTERSINKS , HSS , 1 x 82 DEG , 3/4 x 90 DEG ,KEO , DOLFA,BTRFLD, LOT OF 4
GOOD CONDITION.
|
|
|
USED KEO STRAIGHT SHANK HSS SPOTTING STUB PILOT TWIST DRILL 1-1/4" x 90°
LISTING IS FOR A USED STUB LENGTH SPOTTING DRILL BRAND- KEO SIZE- 1.250" ANGLE- 90° OAL- 3.125" CONDITION- WELL USED NEEDS RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS ... moreAND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8331
|
|
|
USED KEO HSS SINGLE FLUTE COUNTERSINK 1-1/2" Diameter x 90° Degree x 3/4" Shank
LISTING IS FOR A USED SINGLE FLUTE COUNTERSINK BRAND- KEO DIAMETER- 1.500" ANGLE- 90° SHANK- 750" CONDITION- GOOD USED NEEDS RESHARPENED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN ... moreEXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.83
|
|
|
LOT OF 17 KEO HSS CENTER DRILLS #1, #3, #4-1/2
Nice Lot of KEO Center Drills Lot Includes: 4) 4-1/2(3) 3(10) 1 Appear to be Mostly New in Boxes Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1413106c9be-0x105-
|
|
|
HEAVY DUTY 2-3/4" HSS DRILL W/ 5MT SHANK
aims HEAVY DUTY 2-3/4" HSS DRILL W/ 5MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Heavy Duty HSS Drill in good condition. Specifications: Size: 2-3/4" Shank: 5 Morse Taper. Length of Cut: 11" Flute Geometry: 2 Flute. Overall Length: 21" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY 2-3/4" HSS DRILL W/ 5MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
CENTER DRILLS HSS , #3 x 4" , LOT OF 9
ALL APPEAR TOP BE LIGHTLY USED. MIXED MFG. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141911dc588-0x102-
|
|
|
USED GUEHRING 72212 19.050 HSS 3/4 WN 10R-NC DRILL
USED GUEHRING 19.050 HSS 3/4 WN 10R-NC SHIPPING INFORMATION: Shipping Weight: 1 LBS. Shipping from San Bernardino. Ca 92407 Handling Fee: $2.00 per package SIGNATURE AT DELIVERY IS REQUIRED FOR ALL PACKAGES! SHIPPING ADDRESS NEEDS TO BE PAYPAL VERIFIED We only ship within the United States. We ONLY use UPS& US POSTAL for all our shipping needs. Please call us to get a shipping + packaging charges before bidding/finalizing your transaction. BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 5 business days of auction end. If there has been no contact/payment from the buyer within 7 days after the auction ends. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California CUSTOMER SERVICE: We do ... moreour best to present accurate information about every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location.
|
|
|
LOT OF ASSORTED PTD & OTHERS HSS DRILLS 1/4" - 1/2"
aims LOT OF ASSORTED PTD& OTHERS HSS DRILLS 1/4" 1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by PTD& other manufacturers. These are HSS Drills in good condition. Specifications: Drill Sizes: 1/4" 1/2" Lengths of Cut: 1-1/4" 4" Overall Lengths Range: 2-1/2" 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF ASSORTED PTD& OTHERS HSS DRILLS 1/4" 1/2" Reliable Tool Inc. c 2011 | Powered by
|
|
|
taper pin drill lot hss 8 pcs 1/4-1/8good condition
as in title and pix i cant read the# s but will measure dimensions if you email me stapler not included 8oz plus $1.00 handling f/c/mail
|
|
|
USED CORE DRILL 1-47/64" X 1" SHANK 4 FLUTE 8-1/2" OAL X 5" FLUTE HSS USA 680
YOU ARE BIDDING ON ONE USED CORE DRILL 1-47/64" X 1" SHANK 4 FLUTE 8-1/2" OAL X 5" FLUTE HSS USA CAN BE USED AS IS DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1-1/4" HSS S&D REDUCED SHANK DRILL W/ 1/2" SHANKS
aims 1-1/4" HSS S&D REDUCED SHANK DRILL W/ 1/2" SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Heavy Duty HSS S&D Reduced Shank Drills in good condition. Specifications: Drill Sizes: 1-1/4" Shanks: 1/2" Lengths of Cut Range: 2-1/4" Overall Lengths Range: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 1-1/4" HSS S&D REDUCED SHANK DRILL W/ 1/2" SHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
4 HSS S&D REDUCED SHANK DRILL 5/8" to 1-1/4"
aims 4 HSS S&D REDUCED SHANK DRILL 5/8" to 1-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a lot of assorted HSS S&D Reduced Shank Drills in good condition. Specifications: Drill Size: 5/8" to 1-1/4" Shank: 1/2" Lengths of Cut: 3" Overall Length: 5-7/8" to 6-3/16" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 4 HSS S&D REDUCED SHANK DRILL 5/8" to 1-1/4" Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143200d313c-0x102-
|
|
|
LOT OF ASSORTED HSS S&D REDUCED SHANK DRILL 17/32" TO 3/4"
aims LOT OF ASSORTED HSS S&D REDUCED SHANK DRILL 17/32" TO 3/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a lot of assorted HSS S&D Reduced Shank Drills in good condition. Specifications: Drill Size: 17/32" TO 3/4" Shank: 1/2" Lengths of Cut: 3-1/8" TO 3-1/4" Overall Length: 6-1/16" to 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF ASSORTED HSS S&D REDUCED SHANK DRILL 17/32" TO 3/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
LOT OF ASSORTED HSS CENTER DRILLS / COUNTERSINKS - #2 TO #4
aims LOT OF ASSORTED HSS CENTER DRILLS/ COUNTERSINKS- 2 TO#4 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 8 NEW(unused) HSS Center Drills/ Countersinks. Specifications: Sizes: 2 to#4 Tip Sizes: 079" TO.1185. Overall Lengths: 1-13/16" TO 2-3/16" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF ASSORTED HSS CENTER DRILLS/ COUNTERSINKS- 2 TO#4 Reliable Tool Inc. c 2011 | Powered by
|
|
|
1-3/4" DIAMETER HSS STRAIGHT SHANK DRILL BIT
1-3/4" DIAMETER HSS STRAIGHT SHANK DRILL BIT Click Images to Enlarge 1-3/4" DIAMETER HSS STRAIGHT SHANK DRILL BIT SHANK: 3/4" TOTAL LENGTH: 6-1/2" NEEDS TO BE SHARPENED COMES AS SHOWN IN PHOTOS NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 3 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 ... moreHandling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selectio
|
|
|
LOT OF HSS ASSORTED SCREW MACHINE DRILLS 5/16 - 3/4"
LOT OF ASSORTED HSS SCREW MACHINE DRILLS 5/16- 3/4" Sizes: 5/16- 3/4" Other Sizes: 5/8. 9/16, 29/64, 1/2, Shank: 30- 75" OAL: 2-3/4- 5-1/4" Comes as Shown* Discounted Shipping available on Items. Must Send invoice Request*
|
|
|
USED KEO HSS 4-FLUTE COUNTERSINK 1-1/4" (1/2"-Shank) 1.250"
LISTING IS FOR A USED HSS COUNTERSINK BRAND- KEO DIAMETER- 1.250" SHANK- 500" OAL- 2.625" CONDITION- GOOD USED NEEDS RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER ... moreCREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8331
|
|
|
4 PTD & OTHER HSS DRILLS 33/64 - 3/4"
4 PTD& OTHER HSS DRILLS 33/64- 3/4" Sizes: 33/64- 3/4" Other Sizes: 35/64" 23/32" OAL: 4- 6" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
ASSORTMENT OF PILOTED HSS DRILLS - 1/8" TO 1/4" DIAMETERS
These are Used Drills in Good Condition. Specifications: Diameters: 1/8" to 1/4" Pilot Range: 088" to.186" Shanks: Straight. Overall Lengths: 5" Comes as shown in pictures.
|
|
|
4 PTD HSS DRILLS 35/64", 23/32", & 3/4"
4 PTD HSS DRILLS 35/64" 23/32" 3/4" Sizes: 35/64" 23/32" 3/4" OAL: 4- 5" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
25 COMBINATION CENTER DRILL COUNTER SINK BITS HSS KEO DORMER NOs 2, 4, 5, 6, & ?
Used center drills. Most of these have been used very little. 1 doesn't have much life left. And 1 has one bad tip. The other 23 are in good usable shape. There are 2 that I don't know exactly what size they are. I took close up pictures of them so you can decide. Payment: Paypal Shipping: FREE to the lower 48 states only. No refunds/ no returns. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144be58b2fc-0x10c-
|
|
|
1 X 1/2 X 2 3/4" 3FLUTE HSS.SH 100' COUNTERSINK "USED"
THE COUNTERSINK IS STILL IN REALLY GREAT SHAPE NO BLUEING OF ANY KIND SO IT IS STILL STRONG ALSO THE VINTAGE VERY RARE STANLY"PHILLIPS" BRAND OF SCREWDRIVER IS A MUST HAVE.DONT WASTE ANY MORE TIME ORDER.NOW
|
|
|
PAIR OF 4 MT HSS DRILLS 1-9/16" & 1-11/32"
PAIR OF 4 MT HSS DRILLS 1-9/16" 1-11/32" Size: 1-9/16" 1-11/32" Shank: 4MT LOC: 5" 8" OAL: 10" 13-1/2" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
NEW 82 degree 7/8" 4 Flute Countersink HS FYE& One USED HSS 82 degree 1" 3 Flute
These countersinks belonged to my husband who passed away. One is new the other could be I could not tell it is in excellent condition. SEE PICTURES. The new one is a 7/8" 4 flute 82 degree HS it is 4" long the shaft is 21/2" long and the diameter is 1/2" It has FYR on it and it was made in Macedonia. The one that might have been used is 1" 3 flute 82 degree HS it is 4" long the shaft is 21/2" long and the diameter is 1/2" It was made in Yugoslavia.
|
|
|
USED MOHAWK USA 1/4" x 90° LONG SPOTTING DRILL SPL-90-1/4 HSS (.250" x 90 deg.)
LISTING IS FOR A USED SPOTTING DRILL BRAND: MOHAWK MADE IN THE USA PART# SPL-90-1/4 DIAMETER: 250" OVERALL LENGTH: 5.75" HSS CONDITION: LIGHTLY USED DRILL IS SHARP Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAV
|
|
|
21/32 Drill Bit HSS Guhring 8-3/4" CD 10-1/2" OAL
Check out other items in my store will combine items to save on shipping. Shipping out of the US will cost more.
|
|
|
USED UNION TWIST DRILL 1-3/4" 8" X 3-1/2" FLUTE HSS USA 425
YOU ARE BIDDING ON ONE USED UNION TWIST DRILL 1-3/4" 8" X 3-1/2" FLUTE HSS USA SHANK IS 5/8" DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
21/32" Hss Drill W/ 1/2" Shank & 2-1/4" L.O.C.
ALL YOUR AUCTION NEEDS START@ THEPLACETOBUY1984! The Item You Are Bidding On Is a Drill Item Specifications: Cutting Diameters: 21/32" Shanks: 1/2" Length Of Cut: 2-1/4" Overall Length: 4-1/4" ITEMS COME AS SHOWN IN PICTURES. NOTE: Some End Mills May Be Resharpened But Sizes Noted Above Are Accurate And All End Mills Are Useable. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Just a Few Simple Notes on Shipping and Other Questions Below Before Paying. Please Ask For Shipping DISCOUNTS When Purchasing Multiple Items. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. If you have ANY shipping questions, please contact us PRIOR to bidding. ... moreWe apologize for any inconvenience but unless prior arrangements are discussed. We DO NOT ship internationally. Please E-MAIL US at theplacetobuy1984@gmail.com or through eBay Messages if you have QUESTIONS or CONCERNS. Our goal is to be clear about our products and prices so that you are happy with your purchase! How to Request an Invoice so Shipping is Correct and Up To Date: 1. Click COMMIT TO BUY 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select MORE ACTIONS 5. Select REQUEST TOTAL. Thank You For Looking And Good Luck Bidding!
|
|
|
LOT OF HSS OSG METRIC DRILLS 4.76 - 6.7MM
LOT OF HSS OSG METRIC DRILLS 4.76- 6.7MM Size Range: 4.76- 6.7MM Other Sizes: 5.5MM LOC: 1" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
Qty 15 HSS LONG & SHORT SERIES CENTER DRILL & COUNTER SINK COMBO,size#2,3,4.5&7
Qty 15 HSS LONG& SHORT SERIES CENTER DRILL& COUNTER SINK COMBO.Size#2,3,4.5&7 SELLING WITH NO RESERVE! Hello.What we have for auction is a total of 15 H.S.S used long series, short series center drill counter sink combo. Sizes#2,3,4,5,and#7's. 1) 2 x 5" long Qty 1 2) 3 x 2" short Qty 1.3 x 5" long Qty 2 3) 4 x 2" short Qty 2. 4 x 5" long Qty 2 4) 5 x 2 3/4" short Qty 3.5 x 6" long Qty 2 5) 7 x 3" short Qty 2 Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: Rick Fancon 317 W State Clare.Mi 48617 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship ... moreMonday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with no warranty or guarantee. If you ever have any questions or need to contact us for any reason. Please feel free to do so! We do our best to reply as promptly as possible. Because of Ebay's new policy, we are not able to provide our email addr
|
|
|
LOT OF 9 HSS COUNTERSINKS 1/4" TO 3/4 " CHICAGO-LATROBE
Lot of 9 Countersinks Lot Includes: 2) Unknown 1/4" 60 Deg X 1/8" Shank(2) Unknown 1/4" 90 Deg x 1/8" Shank Unknown 1/4" 100 Deg x 3/8" Shank Unknown 3/8" 90 Deg x 1/4" Shank Unknown 3/8" 60 Deg x 1/4" Shank Chicago-Latrobe 1/2" 82 Deg x 1/4" Shank Chicago-Latrobe 3/8" 60 Deg x 1/2" Shank No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We ... morecannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
HSS HS MACHINIST DRILL BIT LOT 1/2 1/4 3/8 ECT VINTAGE CLE-LINE BLUEGRASS TOOLS
Lot of 90+ qty assorted drill bits. A ton of different manufacturers and sizes. All vary in condition. Some of the larger ones are very expensive if bought individually. Being sold as is. Please review pictures and ask any questions prior to bidding. 7.6 Lbs total
|
|
|
3/4" 43 DEGREE HSS 4 FLUTE COUNTERSINK 1/2" SHANK VERY NICE!
FOR SALE IS A VERY NICE 4 FLUTE 43 DEGREE X 3/4" DIA. WITH A 1/2" SHANK COUNTERSINK. IT IS IN EXCELLENT CONDITION. PLEASE READ CONDITION DESCRIPTION AND SEE PICTURES FOR MORE DETAILS. ALSO BE SURE TO VISIT MY STORE FOR MORE GREAT DEALS ON MACHINIST TOOLS AND MORE AS I OFFER COMBINED SHIPPING DISCOUNTS. FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING.
|
|
|
3/4" Silver and Deming Drill Bit HSS Machinist 1/2" Shank
For Sale is a 3/4" Silver and Deming HSS Drill Bit Used a Few Times- VG Condition Cleaning out the shop and selling individual bits still in boxes Photos show all the bits I will be listing Sizes are from 33/64" to 1" by 1/64" 17/32" is missing OAL is 6" Fluted length of bit is 3" Shanks are smooth(no flats) 118 Degree Point- Black Finish Most are new and will be listed as such I will describe condition of any used bits as I post them for sale I will not take individual pics by size as they are all similar Free Shipping to US Addresses Only Please email prior to bidding if you have questions. Returns only if item differs from description or images. Check out my!
|
|
|
4 PTD 43/64" HSS 4-FLUTE CORE DRILLS w/ 1/2" SHANK
Made by PTD. These are 4 used 4-Flute Core Drills in good condition. SPECIFICATIONS: Cutting Diameters: 43/64" Lengths of Cut: 5" Shank Diameters: 1/2" Overall Lengths: 9-1/4" Comes exactly as shown in pictures.
|
|
|
Lot of 5 Niagara 33887 3/4 " HSS USA USED $4.99 ea Square Nose End Mill
Lot of 5 LD=3.125 E251 USED Rough Measurements: Total length: 5 1/4" Cutting length: 3 5/8" Diameter 3/4" Nice pretty good condition item may have been sharpened Note that cutting diameter may be slightly reduced from sharpening. scratches or wear and tear Niagara Cutter 33887 High Speed Steel(HSS) Square Nose End Mill. Inch, Weldon Shank, Uncoated(Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 5.25" Overall Length, 0.750" Cutting Diameter, 0.750" Shank Diameter(see pic) Condition: Used. Removed from service 99% of items are pulled from a working environment unless stated this item(s) are for part and repair even though we thank most are working we do not know anything about this/these item(s) item(s) where received in with electronic recycling& liquidation. YOU ONLY GET EXACTLY WHATS PICTURE. ... moreYou get what is shown in the pictures. Do not assume you get more. SEE PICTURES Terms: YOU CAN USE PAYPAL FOR PAYMENT. USA BASED ACCOUNTS ONLY. WE CANNOT ACCEPT PAYMENTS FROM INTERNATIONAL PAYPAL ACCOUNTS. WE DO NOT SHIP TO ANY INTERNATIONAL LOCATIONS. UNITED STATES ONLY) THE STANDARD RATE SHIPPING COST APPLIES TO LOWER 48 STATES. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146ae7a2a55-0x10a-
|
|
|
3 RESHARPENED STRAIGHT SHANK 4-FLUTE HSS .273"+/- CORE TWIST DRILLS
LISTING IS FOR 3 USED STRAIGHT SHANK CORE TWIST DRILLS BRAND: SIZE: 273" SIZE IS APPROXIMATE FLUTE LENGTH: 2.00" OAL: 3.375" SHANK: 250" 4-FLUTE HSS CONDITION: GOOD USED DRILLS HAVE BEEN RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. ... moreWE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT T
|
|
|
PAIR OF PTD HSS DRILLS W/ 4 MT SHANK 1 23/64", 1 1/2"
PAIR OF PTD HSS DRILLS W/ 4 MT SHANK 1 23/64" 1 1/2" Sizes: 1 23/64" 1 1/2 Shank: 4 MT LOC: 7 1/2- 10" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
PAIR OF HSS DRILLS W/ 4 MT SHANK 43MM & 49.5MM
PAIR OF HSS DRILLS W/ 4 MT SHANK 43MM& 49.5MM Sizes: 43MM& 49.5MM Shank: 4 MT LOC: 9& 10" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
LOT OF ASSORTED HSS/CO PTD & OTHER DRILLS 1/4 - 5/8"
LOT OF ASSORTED HSS/CO PTD& OTHER DRILLS 1/4- 5/8" Sizes: 1/4- 5/8" Some Sizes: 29/64" U, 19/64" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
Lot of 3 Silver & Deming Drills HSS Black 1 1/16", 1 1/8", 1 1/4"
Lot of 3 Silver& Deming Drills HSS Black 1 1/16" 1 1/8" 1 1/4" 01341080 01341163 01341049 Like New
|
|
|
Cle-Line C20751 13/16", HSS, Reduced Shank Drill Bit 6 1/4 inch long made USA
Cle-Line C20751 13/16" HSS, Reduced Shank Drill Bit 6 1/4 inch long made USA My late father-In-Law was a machinist- we are trying to liquidate some of his better tools- I am a novice on this but am getting some help- he etched his name on some of the tools-if you see something listed wrong please let me know you are the experts- if you receive something and it is wrong let me know and you can return it for a full refund of what you paid Thanks.
|
|
|
28 Large Precision HSS Twist Drills SAE 3/8 to 3/4 Cle-Forge PTD Morse Guhring
28 Large Precision HSS Twist Drills SAE 3/8 to 3/4 Cle-Forge PTD Morse Guhring Straight shank HSS machinist's drill bits: SAE: 3/8 OAL 5.25" Morse* 25/64 OAL 5.25" 13/32 OAL 5.25" 27/64 OAL 5.5" SP* 27/64 OAL 5.5" PTD* 7/16 OAL 5.5" 29/64 OAL 5.5" China(2) 29/64 OAL 5.75" SP* 15/32 OAL 5.75" Cle-Forge* 15/32 OAL 5.75" PTD* 31/64 OAL 6" 1/2 OAL 6" WB* 1/2 OAL 5-5/8" Morse* 33/64 OAL 8" Cle-Forge* 17/32 OAL 7" PTD* 17/32 OAL 7.75" 37/64 OAL 6.75" Cle-Forge* 19/32 OAL 7.25" Cle-Forge* 39/64 OAL 7.5" Morse(2) 5/8" OAL 5.5" Cle-Forge(2) 21/32 OAL 9" National* 47/64 OAL 10" 3/4 OAL 5" Osborn. Sheffield England Metric: 11mm OAL 5-3/8" Guhring* 18mm OAL 9.5" I don't know anything about drills. I'm sure some ... moreof these need to be sharpened, if you need more pics let me know. Please ask any questions before you buy. Free shipping in the USA! I would really appreciate a note if you aren't able to pay right away. Thanks! International bidders please be aware that you're responsible for knowing your country's Custom's Rules and Fees. I ship the day after I receive your payment.sometimes even the same day. I cannot guarantee delivery times. the Post Office is in charge of that. On International purchases and any items without free shipping I will try to save you money and combine shipping when you buy more than one item. International buyers please be aware that even though I ship right away. I cannot guarantee delivery times. Your item may be held up in your country's Custom's Office. I will accept returns if notified within 14 days. I work very hard to earn Positive Feedback and 5-Star DSR ratings. So before leaving anything less, please get in touch with me. I'm sure we can come to a satisfactory conclusion! Thank you for visiting! Please let me know if you would like more info. Measurements or photos. I will be happy to oblige!
|
|
|
Drill Bit Morse Taper 4, 1-5/8 HSS, 15" long MORSE Made in usa
this is a used 1-5/8 drill 15 inches long seems sharp but you may need to sharpened it 422
|
|
|
1IN & 3/4 HSS 1/2 Reduced Shank Silver & Deming Drill Bit with 3-Flatted Shanks
LIGHTLY USED HERTEL HS FLATTED 1/2 SHANK SILVER& DEMING DR 118 POINT YOU GET 2 A 1INCH AND A 3/4 INCH I GOT THESE IN AN AUCTION IN A TOOL LOT A WHILE LOT HOPEFULLY SOMEONE CAN GET SOME USE ANY QUESTIONS PLEASE ASK. the 1 inch is lightly used and the 3/4 inch is new
|
|
|
MA Ford HSS 6 FL Countersink Set 7pc 60 Degree 60 Set 1/4" - 1" 79000001
This Listing is for a MA Ford HSS 6 FL Countersink Set 7pc 60 Degree 60 Set 79000001. Please check pictures for condition. Sizes included: 1/4. 5/16, 3/8, 1/2, 5/8, 3/4, 1 inches. Items pictured are only items included in the listing. We usually ship items within 1 business day after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If the error is our fault we will gladly cover all costs, original and return. We over pack all items with packing material to ensure safe ... moreshipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
|
|
|
NEW!!!! Drill Bit Morse Taper 4, 1-5/8 HSS, 16" long Made in USA
Please keep in mind that we sell NOS and USED items NOT new ones. Some NOS parts and tools may have shelf/box wear. If this is the case it will be mentioned in the listing. Many are very old. Rare or hard to come by. Therefore we don't accept returns but yes we will do in some special cases and you are paying for the shipping back to us. IF YOU DON'T FEEL COMFORTABLE WITH THIS, please don't buy to avoid any possible disagreement. We sell QUALITY and all items are in GOOD, VERY GOOD OR IN EXCELLENT CONDITION, WE WILL NEVER INTENTIONALLY SELL A USELESS OR BROKEN ITEM(check our feedback) so please bid with confidence! We know that you won't be disappointed!
|
|
|
1-Large HSS Metal Cutting Drill Bit 3/4 USA
I GOT THIS BIT AT A ESTATE SALE. THIS BIT IS USED BUT IN VERY GOOD CONDITION. EMAIL ME IF YOU HAVE ANY QUESTIONS. THANKS 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1494a21a299-0x114-
|
|
|
Solid Pilot HSS Counterbore Set- #6, #8, #10, 1/4, 5/16, 3/8, 1/2
This was not purchased as a complete set. The 1/4" 5/16" 3/8" and 1/2" were a set, they are made in China. The 1/2" is well used, the other 3 are decent. The#10 is an L&I, American made, and in very good condition. L&I is famous for their reamers. The#6 and#8 are Alvord-Polk, another American company, and they are also very good condition.
|
|
|
~MACHINIST TOOLS 2 HSS DRILL BITS 23/32 and 47/64 BRIDGEPORT LOGAN ATLAS CNC~#4
This listing is for 2 HSS drill bits. Sizes are 23/32 and 47/64. Both in good shape. May need touch up. Made in USA. CHECK MY OTHER TOOL LISTINGS
|
|
|
Large mixed lot of 3/4" to 1" lathe tool bits HSS and Carbide
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Large mixed lot of 3/4" to 1" lathe tool bits HSS and Carbide I think there are a couple 5/8 also used condition. Most are ground Check all pics All sales final! Used the shipping calculator for shipping cost. Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. Take a look at my other auctions to see if there is anything other machinist tools that you might be interested in. Happy bidding!
|
|
|
(4) ROTO-BOR HSS BACK SPOT FACERS & PILOTS W/ 1/2" SHANKS
We Have 1.000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us@ 909.919.9600! GF Make: Roto-bor. Condition: GOOD Specifications: O.D. Sizes: 15/16" 1-1/16" 1-1/8" 1-3/16" Pilot Diameters: 1/4" Shanks: 1/2" Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End ... moreOf The Auction. Notice! After purchasing and collecting your item. We would appreciate your feedback. If you could please leave a 5 star rating in all four of the applicable categories, it would be greatly appreciated. If you have any problems or issues, please contact us prior to leaving any feedback. We strive to provide the best service we can, and understand that mistakes are made in some cases. In the case of these mistakes, we will do whatever is necessary to rectify the situation. Furthermore, because of issues with past customers, we mark all our items to prevent any dishonest eBayer from trying to exchange our item with their old/non-working item. This type of behavior is unacceptable, and action will be taken against these buyers through eBay's policies by reporting them to eBay immediately. Here at MachineStation, we realize most people are honest, and do not practice techniques mentioned above. By the same token we are committed to provide superior customer service to all. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
|
|
|
PAIR OF ATM & OTHER HSS 4 MT DRILLS 1" & 1 11/32"
PAIR OF ATM& OTHER HSS 4 MT DRILLS 1" 1 11/32" Sizes: 1" 1 11/32" Shank: 4 MT LOC: 2 1/2- 6" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|