|
LOT OF 5 / 1 POUND ROLLS EASY FLOW TARAMET LEAD FREE SOLDER + IRON & PIPE FREE
NO RESERVE! 6.816 + POS. FEEDBACKS, NEVER A NEG. THE REASON FOR THIS. I BELIEVE IS MY DESCRIPTION BELOW[ MY PICTURES& I TELL IT THE WAY IT IS. GOOD OR BAD] NO DECEPTION OR GREED AT ALL ON MY PART. COMBINE SHIPPING IS NOT A PROBLEM AT ALL. NO INTERNATIONAL BIDDING. THANK YOU. PLEASE READ IT ALL. IF YOU BID. I THANK YOU AGAIN/ LOT OF 5/ 1 POUND ROLLS. EASY FLOW TARAMET LEAD FREE SOLDER + IRON& COPPER PIPE IS FREE[ SEE PICTURE] VERY LITTLE HAVE BEEN USED ON A COUPLE OF THE ROLLS BUT SEE THE SCALE. STILL SAYS 5 POUNDS. THE ELBOW'S& PIPE. HAVE NEVER USED, ITS FREE THE IRON IS OLD AS ME. AND I AM OLD MODEL A. 110 120 VOLTS TORRINGTON CONN, NO ZIP ON THIS TOOL IT HAS WEAR AND ITS FREE ALSO I BELEAVE THE IRON WILL AND CAN BE USED WITH A COUPLE SMALL THIN SOLDER WIND UP'S ON WOOD TURNES AT THE BOTTOM OF PICTURE. ALSO FREE. THE ... moreSCALE IS NOT INCLUDED. OLDER THAN ME, COULD BE I TRY TO TELL IT THE WAY IT IS. NO DECEPTION AT ALL, EVER PLEASE CHECK THE PICTURES. THE PICTURES ARE PART OF THE DESCRIPTION. THANK YOU THANKS FOR LOOKING AT MY SITE. ALWAYS LISTING FISHING, TOOLS AND OTHER CRAZY STUFF. PUT ME IN YOUR FAVORITE PLACES IF YOU CARE TO TAKE A PEEK ONCE IN AWHILE. RICHBET20. THANK YOU. AMAZING WHAT YOU MAY FIND ON MY EBAY SITE. I DO TAKE OTHER FORMS OF PAYMENT. I WILL SEND A INVOICE AT AUCTION END. I HAVE HAD PARTS CHANGED ON MY ITEMS. What a Damm shame. DAMM IS MY LAST NAME. AND I USE EVERY DAY. I ADDED 14 DAY RETURN AS EBAYS REQUEST. WITH BUYER PAYING RETURN SHIPPING. NO PARCIAL RETUNS. IF NEEDED SOME PEOPLE TELL ME MY DESCRIPTION IS TO LONG. THEY ARE SO RIGHT. AND I TELL THEM PLEASE READ MY[ FIRST LINE ABOVE] AGAIN THAT'S WHY. I THANK YOU, ALL OF YOU, COMBINE SHIPPING NEVER A PROBLEM. I BELIEVE MY PICTURE WILL TELL THE REST OF THE STORY. IF YOU HAVE A QUESTION I AM HERE IN THE GREAT UNITED STATES OF AMERICA. AND I AM PROUD TO BE HERE. I SHIP PRIORITY ONLY. I DO NOT MAKE MONEY ON SHIPPING. THIS AUCTION[ S&H 12.34 FLAT RATE BOX PRIORITY WITH CONFIRMATIO
|
|
|
solder rolls,used,95/5,50/50,core,and mic. displayed,aprox 5 lbs
rolls as shown.Aprox 1.5 rolls of 50/50,1 roll of 95/5,1roll of core, plus mic. listed. these quantities are only aprox. please refer to the pictures. Feedback is important to all of us. I will give feedback.
|
|
|
Multicore 370 Flux Core Tin/Lead .61mm Solder 500G
I am listin this as used but it looks like the tape just came off. It looks just as full as the new spool i have listed maybe missing a couple of feet if any. Shipping is free. READ THE WHOLE AUCTION BEFORE BIDDING I do NOT ship to Oregon or Washington State. MY AUCTION STATES A 5 WORKING DAY HANDLING TIME DONT BE SURPRISED WHEN IT TAKES 5 WORKING DAYS TO SEE A TRACKING NUMBER POST. WHEN YOUR ITEM SHIPS A TRACKING NUMBER WILL POST SO NO SINCE EMAILING ME TO TELL ME ONE HAS NOT POSTED I ALREADY KNOW. I will not ever under any circumstance. Including a dispute over condition, pay for return shipping. The Buyer pays return shipping for any item being returned for any reason. I will not give a partial refund for any reason items that offer a guarantee may be returned for a full refund but not kept for a partial refund for any reason.
|
|
|
Kester Solder Bar 10 oz 50/50 ATSM Class A Tin Lead
You are looking at approx. 2/3 of a Kester solder bar. It has been cut off but the labeling is still on it. I did put it on a scale and it weighs 10 oz. Please look at the pics carefully before you bid. Thanks for looking!
|
|
|
OLDSCHOOL SOLDER LOT antique soldering iron lead solder
see pics. various oldschool solder spools and accessories-Feel free to contact me with any questions! If you are not satisfied. Returns are accepted up to 14 days after item is recieved, buyer pays return shipping. Posmologic aims to please! Make an offer! Have a great day! MAKE AN OFFER!
|
|
|
Waage WP2A-19-1 Round Dip Melting / Coating Pot - 600W, 0 to 450°F
Waage WP2A-19-1 Round Dip Melting/ Coating Pot- 600W. 0 to 450°F Waage Round Dip Melting Pot Model: WP2A-19-1. Specifications: 600W, 115V, 1qt. Capacity, 0 to 450°F(approx. 5" x 3.25" inside) Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used- Untested. We did plug it in and it powers on fine. No further testing was done. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Listed for M.A. by S.S. Located at: EB5-E-5 Shipping weight is 8lbs. 0oz, shipped from our warehouse in California. zip 90221) Default Shipping Service: UPS Ground California residents will be charged 9.00% sales tax. Tennessee residents will be ... morecharged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in either state. We accept the following methods of payment: For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item
|
|
|
12 Rolls 8 1/2 pounds Mixed Solder Kester Interflux Alphametals
THis is for 12 rolls. Mixed lot I tried to get a readable pic of all of them if you have a question about 1 let me know. THese are all pretty equally used no almost empty rolls all have at least 3/4 solder left. Shipping is $11.00 READ THE WHOLE AUCTION BEFORE BIDDING MY AUCTION STATES A 5 WORKING DAY HANDLING TIME DONT BE SURPRISED WHEN IT TAKES 5 WORKING DAYS TO SEE A TRACKING NUMBER POST. WHEN YOUR ITEM SHIPS A TRACKING NUMBER WILL POST SO NO SINCE EMAILING ME TO TELL ME ONE HAS NOT POSTED I ALREADY KNOW. I will not ever under any circumstance. Including a dispute over condition, pay for return shipping. The Buyer pays return shipping for any item being returned for any reason. I will not give a partial refund for any reason items that offer a guarantee may be returned for a full refund but not kept for a partial refund for any reason.
|
|
|
Do it best silver lead free solder 3.2 oz plumbing solder spool
Greetings to all my customers. Please keep in mind that everything I sell we have a limited supply of or we MAY HAVE ONLY 1. This means if you see something that is a really good deal and you can stock up you should. Because once it is gone then it is gone. Also. Please keep in mind that if there is a problem with an item contact me. I will resolve it to your liking. I have a 100% Satisfaction policy I intend on keeping strong:
|
|
|
NU-CONCEPT NCS500 EPOXY/SOLDER PASTE DISPENSER USED EXCELLENT CONDITION
NU-CONCEPT SYSTEMS EPOXY/SOLDER PASTE DISPENSER MODEL: NCS500 USED* UP FOR SELL IS ONE USED NU-CONCEPT SYSTEMS NCS500 EPOXY/SOLDER PASTE DISPENSER- UNIT WORKS FINE- COSMETIC CONDITION IS VERY VERY GOOD- WHAT YOU SEE IN THE PHOTOS IS THE LOT FOR SELL. NO OTHER ACCESSORIES, MANUAL etc ARE INCLUDED* 14 DAYS MONEY BACK GUARANTEE- WE SHIP THIS ITEM VIA USPS PRIORITY MAIL- WE SHIP EVERY DAY FIVE DAYS A WEEK- ORDERS PAID BY 12 NOON CENTRAL TIME SHIP THE SAME DAY* FOR COMBINE SHIPPING DISCOUNTS ON MULTIPLE ITEMS. PLEASE ASK ME FOR A COMBINED INVOICE* WINNING BIDDERS MUST PAY NO LATTER THAN 5 DAYS AFTER AUCTION ENDED*
|
|
|
Mixed wire solder and 15 lb up
There are 14 of them.The solder is old and the top of it is fading away.Its good for soldering a copper pipe.only shipping in united states.if you bid it you have to pay it less than 48hours.
|
|
|
Can of Kester Litton solder paste from Venture Newark Anaheim Brantford Ontario
Can of Kester soldering paste from Venture. Check out the pictures.
|
|
|
KESTER 44 RESIN FLUX CORE SOLDER .030 DIAMETER 60/58 w/box vintage USA made
Vintage Kester solder in original box. Box is worn. About 3 ounces are missing from the original pound. Alloy/60 Core/58 Flux/44" resin Diameter/030 See photos for more description.
|
|
|
RADIO SHACK 1 LB. ROLL 60/40 .062 DIA. ROSIN CORE SOLDER WEIGHS 1LB
RADIO SHACK 1LB ROLL 60/40.062 DIA ROSIN CORE SOLDER. PUT ON SCALE AND IT WEIGHS 1 LB. LOOK AT ALL PICTURES AND ASK ANY QUESTIONS.
|
|
|
3 partial rolls Sn60WRP2 tin alloy with rosin core solder 0.032" diameter 3lbs
3 partial rolls Sn60WRP2 tin alloy with rosin core solder 0.032" diameter 3lbs- 3 surplus rolls of solder- some of the rolls are partial or full depending on photos- all together this batch weighs 3 lbs- two rolls of this batch is 0.032" diameter solder. Rosin core Sn60WRP2, normally this solder would cost around $65. So make an offer! Location L12) FAST SHIPPING FAST SHIPPING FAST SHIPPING FAST SHIPPING ITEM WILL SHIP as it appears in photo. Only item(s) in photo included shipment please look left for our Ebay store categories. Shop our store today! ALSO IN OUR EBAY STORE TODAY: 1000s of drill bits lots of different sockets. Solder* Taps. Reamers and other consumables*Snap On wrenches. Sockets, more! Browning Split Taper Bushings and V-Belt Pulleys. Variable etc. many. Many different abrasives, sanding paper, cloth, belts, discs. ... moreSodium bulbs General Electric*Elec. Transformers. Small motors, relays. Adaptors*Parker Fittings by the 100s*Fluke meters and leads*metal working cutters reamers tool holders*hammers& torque meters*circ saw demolition blades tile blades plumbing tools hvac tools AND MUCH MORE! click here for my store: http:stores.shop.ebay.com/A-Good-Source Reliable Seller. Reliable Tools, Great Prices
|
|
|
5% silver solder sticks 21 full sticks + 7sticks -at 3/4 lenght
I found those in the van i have purchased last week. 5% silver solder sticks 21 full sticks + 7sticks-at 3/4 length. Please see picture. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-143a1c19f89-0xfd-
|
|
|
Vintage 1940s 1950s Weller 8100 Soldering Gun Iron Tested Working
DESCRIPTION Vintage 1940s 1950s Weller 8100 Soldering Gun Iron Tested Working For sale is the rare soldering iron shown. Thanks for looking and check out my! SHIPPING DETAILS Actual shipping and handling charges are shown in the listing. Often. Multiple shipping options are offered including different levels of service at varying costs. Charges are calculated based on your location. If there are any questions about shipping charges. Please contact me before bidding. All items will be shipped with insurance to guard against losses. Sorry. But we cannot accept any requests for special markings or enclosures with the shipped item. The address used in checkout will be used for shipment. POLICIES All items come with a 14 day return policy. Your purchase price will be refunded when the item is received back in the same condition in which it was ... moresent Items that have been damaged or altered or sealed packages that have been opened will not be accepted for refund Return shipping is not covered and will be paid by the purchaser. Items damaged in shipping will be covered with shipping insurance. International buyers. Please contact me before bidding unless international shipping is expressly offered If you have any issues with your purchase. Please contact me to resolve them We appreciate your business and your positive feedback once the item is received. Thanks for your interest. And good luck.
|
|
|
Vintage KESTER "44" RESIN SOLDER 0.125 DIA.66 CORE ALLOY 60/40
DESCRIPTION Vintage KESTER"44" RESIN SOLDER 0.125 DIA.66 CORE ALLOY 60/40 For sale is the nice spool of vintage solder shown. Some has been used. See photo. Thanks for looking and check out my! SHIPPING DETAILS Actual shipping and handling charges are shown in the listing. Often. Multiple shipping options are offered including different levels of service at varying costs. Charges are calculated based on your location. If there are any questions about shipping charges. Please contact me before bidding. All items will be shipped with insurance to guard against losses. Sorry. But we cannot accept any requests for special markings or enclosures with the shipped item. The address used in checkout will be used for shipment. POLICIES All items come with a 14 day return policy. Your purchase price will be refunded when the item is received ... moreback in the same condition in which it was sent Items that have been damaged or altered or sealed packages that have been opened will not be accepted for refund Return shipping is not covered and will be paid by the purchaser. Items damaged in shipping will be covered with shipping insurance. International buyers. Please contact me before bidding unless international shipping is expressly offered If you have any issues with your purchase. Please contact me to resolve them We appreciate your business and your positive feedback once the item is received. Thanks for your interest. And good luck.
|
|
|
Vintage Almost Full Spool of LFI 40-60 Solder
SquareTrade © AP6.0. Comes as pictured. About us: We offer a large variety of items and do not specialize in any one area. The majority of our items are acquired through estates. Home sales, storage bins, closeouts etc. We describe them to the best of our ability and use multiple photos to help aid you in your bidding decisions. If you have any questions or concerns please email prior to bidding as we are not specialty sellers and something that may seem obvious to you regarding an item may not be obvious to us. All items are as pictured and described to the best of our abilities. Regarding Classes of Mail and Delivery Times: We are a small operation and ship out twice a week. Due to this please expect a minimum of five business days(even though most orders will ship out sooner) We appreciate your business so please respect our posted ... moreprocessing time. Orders placed between 9:01 am on Wednesday and 9:00am on Saturday will ship the following Tuesday(three days after Saturday) Orders placed between 9:01am on Saturday and 9:00am Wednesday will be shipped on Friday of that week. While Media Mail and Parcel Post are cost effective they are also the slowest methods of transport. Within the continental U.S. lower 48) these can take up to two or three weeks to arrive. When choosing these methods for Alaska. Hawaii. Puerto Rico expect delivery time of a month or more. This also applies to APO/FPO addresses. Please keep this in mind when choosing class of mail during checkout. DO NOT EXPECT TO RECEIVE MEDIA MAIL SHIPMENTS ANY SOONER THAN TWO WEEKS. Sometimes it may arrive quicker. Most times this is not the case. In some instances when Parcel Post is chosen we may upgrade the shipment to Fed Ex Ground since they are a more efficient means of transport. Priority Mail is generally 2-3 business days. However there is no guarantee of this. All domestic orders are shipped with some type of tracking information. This information will be emailed to you when your order is processed and in most cases will be available in
|
|
|
Roll of 1/2lb OATEY SAFE FLO Lead Free SILVER SOLDER 8 oz.
Roll of 1/2lb(8 oz. OATEY SAFE FLO Lead Free SILVER SOLDER 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143af4dab29-0x106-
|
|
|
4 lb reel 73/27 Swiss Solder Stained Glass Electronics
This is a reel of Solder. Marked"Swiss Laboraties" and"73" please see pics) I believe it to be 73/27 lead solder. The weight is 4.5 lb, so it is a slightly used 5 lb reel. Shipping, padded, in a flat rate envelope.
|
|
|
Assorted Soldering - See Photos, Pics of Each Weighed Individually
I don't know if any are unused. Judging from the weight. The TRW and Radio Shack ones may possibly be unused. See photos and judge for yourself. I don't know anything about soldering. The small tube does say it contains lead, not sure if it is safe to use. Shipping via USPS. We print labels through Ebay and will not alter addresses because we’re no longer protected through the Ebay Seller Protection Policy if we do. You control the shipping address in your account. So please make sure it is correct before bidding on any of our items for sale. Paypal payment only No Returns. Sold As-Is. No Refunds. Unless we overlooked something and it wasn’t disclosed in listing. We are now participating in global shipping. Note: With the exception of shipments to Canada. Delivery to P.O. Boxes is not supported by the Global Shipping Program. Shipments ... moreto APO or FPO addresses are also not supported. Michigan residents subject to 6% sales tax Thanks for considering a purchase from Used But Not Abused. Inc. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Lot of soldering wire! solder - Radio Shack Bernzomatic Dutch Boy Lotzinn Silver
INTERNATIONAL SHIPPING WELCOME! I NOW SHIP DAILY ON WEEKDAYS! DESCRIPTION Lot of soldering wire! solder- Radio Shack Bernzomatic Dutch Boy Lotzinn Silver Some are new! Some are used! There are a few pounds altogether. One of them may not be soldering wire. Sold as is. As pictured! Priced to sell! Good luck and thank you! GET IT NOW BEFORE IT'S GONE! I have tons of RC Parts. Accessories and more! in my eBay store that are available NOW via instant BUY IT NOW! I've priced them very competitively to get them moving as fast as possible! Click BUY IT NOW and the item will be delivered to you door shortly(anywhere in the World) That's all you have to do to! I have also have many related items available in my eBay Store! Check back often for new listings and discounted sales! Maybe you'll find something extra cool in my store you'd ... morelike to add to your order(combined shipping welcome) By the way. If you ever have an issue with your order- or you are unhappy of your order; feel free to contact me! I'm here to help- EVERYONE! ALWAYS! SHIPPING DETAILS INTERNATIONAL SHIPPING WELCOME! SHIPPING AND PACKAGING IS FREE IN THE USA! I'll pay the shipping and packaging costs just to say thank you! I usually ship daily- However. In some situations- item can be shipped within 72 hours of payment time(business days) Payment Details Winning bidder must pay within 48 hours of auction end time(unless you contact me in advance for an extension) OTHER FOR
|
|
|
Amco & Kester Solder Paste Tins 1/2 full
2 collectible or useable Amco& Kester Solder Paste Tins each one is about1/2 full
|
|
|
Vintage Weller Soldering Gun 8100 Junior Works/ lights 120V 1.1amp sod
Vintage Weller Soldering Gun 8100 Junior Works/ lights 120V 1.1amp sod Vintage Weller model 8100 Junior. 120 volts, 1.1 amp. 60 cycles. Made in Easton, PA Included is everything you see in pictures. Comes from a pet free. Non-smoking, clean home. No returns is my policy. This item is vintage. Works, and has been used. Note: There's a crack on top of the gun. But it doesn't affect its performance. PLEASE CHECK MY PICTURES FOR A BETTER DESCRIPTION; AS THEY ARE PART OF MY DESCRIPTION! for more great items! PAYMENTS: I do require payment by PayPal. PayPal will accept your credit card payments. NOTE: International Shipping or Outside the USA: I welcome and ship internationally. However prior to placing and order or making a selection, please contact me first by E-Mail for prices on shipping as this will avoid confusion regarding shipping ... morefees and it will be greatly appreciated. If you have any questions don't hesitate on e-mail me. txzj pxzj6949 txzj50 txzj66
|
|
|
KESTER SOLDER 44 ROSIN ALLOY SN60 CORE 58 .031 DIA
KESTER SOLDER 44 ROSIN ALLOY SN60 CORE 58.031 DIA- ON RIGHT IN PICTURE. RESIN FIVE ALLOY 50/50.062 DIA ON LEFT IN PICTURE AND 1 ROLL WIRE IN THE CENTER. AS PICTURED. LOT 53) WITH"FREE SHIPPING" YOU CAN ORDER ALL YOU WANT WITH FREE SHIPPING OFFERED Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Nokorode Soldering Paste 1/2-full Tin Can
Used Vintage Nokorode Soldering Paste 1/2-full Tin Can. Vintage Nokorode Soldering Paste 1/2-full Tin Can for sale here. Buyer will receive item as pictured Buy it Now from a trusted seller Thanks For Looking We combine shipping. Please visit our ebay store to make your purchase ABOUT US Our Company was established in 2005 with the goal of providing high quality and extremely affordable merchandise to you our customer. We sell in wholesale lots and individual retail items. We will buy. Sell or trade just about anything of value. With a 10,000 square foot facility to receive, market and ship products in a timely and professional manner, we hope you will find a very positive experience with us and return again and again for more great deals. PAYMENT We currently accept payment via PayPal. Payment should be made within 3 business days of the ... moreclose of the auction. A confirmed address is required. RETURNS Unless stated that the product is being sold"As Is" in the listing. We accept returns within 14 days of reciept of your item. Any return shipping cost is the responsibility of the customer. Should you wish to return an item, please contact us, and we will issue you a Return Authorization number. INSURANCE Some items we sell that is of high value. Insurance is required and maybe included in the listing. Less expensive items, Insurance will be left up to the buyer as an option at checkout. PACKAGE TRACKING All packages are shipped via US Postal Service or UPS. When the label is printed. PayPal will send you an email with the delivery confirmation and/or tracking number. COMBINED SHIPPING We are happy to provide combined shipping on items purchased. The combined shipping cost is determined by the entire weight of the purchase. To ensure accuracy to this policy. Please wait for a combined invoice from us before completing checkout. note, the combined shipping has a 3 day time limit, any shopping that falls out of this period will be invoiced and shipped seperately) LOCATIONS We Currently ship Worldwide via USPS
|
|
|
Canfield Technologies Inc. Rosin Core Solder 60% Tin 40% Lead 1LB. SAVE !!
This listing is for a Almost full spool of Canfield Technologies. Inc. Rosin core solder 60% Tin 40% Lead. The spool weighs 15.3 oz. This is a small size solder good for board work. Must Sell! SAVE! Surplussuplies makes no representation of any item(s)sold to be fit for a particular purpose and assumes no liability for its use or misuse. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) It is assumed that the item(s) will be installed and operated by qualified personnel. The purchaser, by bidding on this item(s) indicates their acknowledgment of and agreement to the terms of this disclaimer. Thank you for looking and Good Luck Bidding.
|
|
|
Vintage DUTCH BOY Solid Wire Solder 1/8" - 40/60 -PARTIAL ROLL-National Lead Co.
Vintage DUTCH BOY Solid Wire Solder 1/8" 40/60- PARTIAL ROLL. National Lead Co. USA. This solder and the spool both show overall wear due to age and use. It appears to be in good used condition. Please refer to the photos to judge the condition for yourself. Payment is required within 3 days after the end of auction or Buy It Now purchase. We will only ship to eBay/PayPal confirmed addresses. USA only. Sold"as is" with no returns.
|
|
|
Multicore Solder .036"Dia. .91mm SN60 type x2000 One Pound Roll
MULTICORE SOLDERS.036.91MM SN60 TYPE X2000 IN 1 POUND ROLL. THERE WAS SOME USED BUT NOT MUCH AT ALL ALMOST A BRAND NEW ROLL, IF ANY QUESTION PLEASE ASK, SHIPPING IS WITH TRACKING NUMBER, THANKS FOR LOOKING. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143d36292ec-0xf1-
|
|
|
50/50 Tin /Lead Solder - Over 6# total weight - 6+ pounds
50/50 Tin/Lead Solder- Over 6# total weight- 6+ pounds. Miscellaneous size rolls from full to partial rolls wire solder + 1 piece bar solder.
|
|
|
vintage used spool of Nassa solder-pure ww rosin C rosin spec at 7075-15.3 oz.
Up for auction is an used roll of Nassau solder. Specs shown in pictures. From a local storage sale. Weight of the spool is 13.5 ounces. Condition as shown. PLEASE READ BELOW BEFORE BIDDING* Outside of the USA please check shipping calculator before bidding* FREE DOMESTIC DELIVERY CONFIRMATION" I DO NOT FALSIFY AMOUNT ON CUSTOM FORMS" POST OFFICE WILL TRACK OUT OF THE COUNTRY PACKAGES UP TO THE POINT THAT THEY LEAVE OUR CUSTOMS. ONCE A PACKAGE LEAVES CUSTOMS WE ARE UNABLE TO TRACK IT AND HAVE NO CONTROL OVER AMOUNT OF TIME IT TAKES TO DELIVER A PACKAGE. COMBINED SHIPPING AVAILABE. BE ADVISED POST OFFICE HAS SIGNIFICANTLY INCREASED RATES. ITEMS GOING OUTSIDE THE U.S.A. OVER 4 LBS. HAVE TO GO PRIORITY AND THIS DOES INCREASE THE POSTAGE QUITE A BIT. EMAIL FOR MORE PICTURES IF NEEDED. ASK QUESTIONS Unless otherwise stated all of my ... moreitems are in used condition from local estate and storage shed sales. If you have any questions about the condition or if you feel I have made a listing mistake please email me. I usually ship the day after payment is received and leave feedback when shipped. Sorry i do not end auctions early. PAYMENT DUE WITHIN 5 DAYS OF AUCTION END AND WILL BE BY PAYPAL ONLY. After auction end if you have changed your mind. Can not pay at the present time, or have other problems, please let me know. WE CAN ALWAYS WORK SOMETHING OUT. Also. If not satisfied with goods or service let me know. Satisfaction guaranteed.
|
|
|
2 vintage rolls of solder-Dutch Boy stained glass + Rosin Core Solder brand
Up for auction are 2 used rolls of solder in as found as shown condition. From a local storage sale. Specs as pictured. Dutch Boy weighs 5.9 ounces + Rosin Core weighs 11.1 ozs. PLEASE READ BELOW BEFORE BIDDING* Outside of the USA please check shipping calculator before bidding* FREE DOMESTIC DELIVERY CONFIRMATION" I DO NOT FALSIFY AMOUNT ON CUSTOM FORMS" POST OFFICE WILL TRACK OUT OF THE COUNTRY PACKAGES UP TO THE POINT THAT THEY LEAVE OUR CUSTOMS. ONCE A PACKAGE LEAVES CUSTOMS WE ARE UNABLE TO TRACK IT AND HAVE NO CONTROL OVER AMOUNT OF TIME IT TAKES TO DELIVER A PACKAGE. COMBINED SHIPPING AVAILABE. BE ADVISED POST OFFICE HAS SIGNIFICANTLY INCREASED RATES. ITEMS GOING OUTSIDE THE U.S.A. OVER 4 LBS. HAVE TO GO PRIORITY AND THIS DOES INCREASE THE POSTAGE QUITE A BIT. EMAIL FOR MORE PICTURES IF NEEDED. ASK QUESTIONS Unless otherwise ... morestated all of my items are in used condition from local estate and storage shed sales. If you have any questions about the condition or if you feel I have made a listing mistake please email me. I usually ship the day after payment is received and leave feedback when shipped. Sorry i do not end auctions early. PAYMENT DUE WITHIN 5 DAYS OF AUCTION END AND WILL BE BY PAYPAL ONLY. After auction end if you have changed your mind. Can not pay at the present time, or have other problems, please let me know. WE CAN ALWAYS WORK SOMETHING OUT. Also. If not satisfied with goods or service let me know. Satisfaction guaranteed.
|
|
|
Solder Lot 3 Rolls Total Weight 1 lb 9 oz 1.7ozSoldering Paste Tin Solder Wick
Here is a lot of Solder including 3 Rolls with a total weight of 1 lb 9 oz. A partial roll of Solder wick, and a 1.7 oz of no 50 Tin of Mueller Brass Streamline Soldering Flux that is almost full. The Solder lot is sold as pictured. Please look at my listings. And I will gladly combine shipping to save you money. Thanks for looking! Gary.
|
|
|
Tin /Lead Solder Scrap 6.12 Lbs 50/50 or 60/40. Your guess is as good as mine.
You are looking at 6 plus lbs of tin/lead solder Either 50/50 or 60/40 respectfully. I have no clue as to the exact% of each. Was used to add tin to pure lead to make for better pours. Please see the pictures of the item you will receive. Thanks! David Looking for ingots of different types of lead? Check out my other listings! FREE SHIPPING BTW FOR THIS LISTINGS. THANKS! David g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-143d3629371-0xf9-
|
|
|
Soldering Wire, Resin & Plugs
Variety of items for soldering. Resin Soldering Flux new Archer Desoldering Braid new Silver Bearing Solder opened 2 Banana Plugs new And misc soldering wire Posted with
|
|
|
Silvaloy-15 Silver Brazing Alloy Rod Incomplete 18 Whole Stick 11.2 oz.
Silvaloy-15 Silver Brazing Rod Open package, 18 complete rods. 2 have been very partially used, 1 less than halfway used. Weighs 11.2 oz(7 lb) Package is pretty beat up. Rods how some tarnishing. Please see photographs, International Buyers: Please wait to be invoiced for exact shipping costs before completing your purchase. Shipping Services: Items are shipped within one business day of receipt of cleared payment. Monday-Friday. Return Policy: Returns are accepted within 14 days of delivery for items returned in the same. Unworn condition(with tags attached if sold as NWT) they were sent out in. There will be a 20% restocking fee deducted on all returned items of clothing. 15% restocking fee applies to items in all other categories. It is the buyer’s responsibility to return the item at their own expense. Posted with;1?RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143e36c45a6-0xff-
|
|
|
- NEW Old Stock Chemoloy 1 lb Spool Solder .047- 60-40 This is the good stuff!
New Old Stock Chemoloy 1 lb Spool Solder.047- 60-40 This is the good stuff! New Old Stock from 1982 Shipping and payment terms: I strive for positive feedback and five star rating and will do whatever it takes to satisfy the buyer. Please contact me before leaving feedback if you have any problems or questions about your purchase. I accept PayPal exclusively. After 4 days if no payment is received an eBay Unpaid Item Dispute will be filed· I will ship to the USA from California and will email you the tracking number once the item ships. I ship within 2 days after your payment is received· I ship Monday– Friday& all items are in stock Feel free to contact me with any questions! CHECK MY FEEDBACK- All buyers are very happy: I will leave you POSITIVE feedback upon payment. Thanks for looking– Chris
|
|
|
KESTER SOLID Wire solder ALLOY 50/50 Dia .125
NEARLY FULL 5# coil with at least 4 1/2 lbs left. This is solid solder wire.125 diameter.just ad heat: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143e438cd2c-0xf6-
|
|
|
KESTER 44 RESIN CORE SOLDER ALLOY 0/50 CORE 66 dia .093
KESTER"44" RESIN CORE SOLDER. ALLOY 50/50 CORE 66 Dia.093AT LEAST 4 lbs.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143e438ccdb-0xdc-
|
|
|
Harris Safety-Silv Silver 56 56FC Orange Flux Solder Brazing 60g 6 Sticks Rods
Will pack rod with cotton in tube edge and pack in a larger box. SEE PHOTOS FOR description! 60G +. SOLD AS-IS AS DESCRIBED. + =
|
|
|
ASARCO Federated Solder One Pound Spool 40 60 Rosin Core 13 GA Solder
ASARCO Rosin Core 13 GA 40/60 solder One LBS $5.00 USPS mail Shipping anywhere in the continental US Pickups are always welcome from 46173 I'll gladly combine shipping just let me invoice you before you pay. Sorry no shipping outside the US. I would like to hear from you so please contact me if you have any questions. Concerns, or comments Before Bidding. I'll gladly combine shipping just let me invoice you before you pay.Pickups are always welcome with the understanding that Indiana sales tax of 7% will apply and all Indiana residents will be charged Indiana tax regardless of pickup or shipping Thanks for Looking and Good Luck Bidding.
|
|
|
Partial Roll Canfield 40 Tin / 60 Lead Solder
Partial Roll Canfield 40 Tin/ 60 Lead Solder You are bidding on a partial roll of solder. No way to know how much there is though a full roll weighs 16oz and this weighs 7.3 oz. Comes as pictured. About Us: We offer a large variety of items and do not specialize in any one area. The majority of our items are acquired through estates. Home sales, storage bins, closeouts etc. etc. We describe them to the best of our ability and use multiple photos to help aid you in your bidding decisions. All items are as pictured and described. If you do not see a particular part or that part is not described in the auction then it most likely IS NOT INCLUDED. When able, items that require testing are tested, however there are some items that we(for whatever reason) are unable to test. Those items are sold AS-IS untested which means there is no guarantee ... morethat they will work as originally intended. In most cases these items are fine, but in some cases they are not. If you have any questions whatsover in regards to an auction don't hesitate to contact PRIOR TO BIDDING. By placing a bid you are agreeing to all the parameters set forth within the auction. Your bid is a binding contract and will be treated as such. Regarding Classes of Mail and Delivery Times: While Media Mail and Parcel Post are cost effective they are also the slowest methods of transport. Within the continental U.S. lower 48) these can take up to two to three weeks to arrive. Please keep this in mind when choosing class of mail during checkout. DO NOT EXPECT TO RECEIVE MEDIA MAIL SHIPMENTS ANY SOONER THAN TWO WEEKS. Sometimes it will arrive quicker. Most times this is not the case. In some instances if Parcel Post is chosen we may upgrade the shipment to Fed Ex Ground since they are a more efficient means of transport and also include free insurance up to $100(which the post office does not) We do not ship UPS, but ebay does not offer a Fed Ex Ground as part of their postal calculator choices. So know if you choose UPS Ground the item is actually being ship
|
|
|
Pace 7012-0002-P1, STRIPTWEEZ WIRE STRIPPER TS15
This is a used Pace 7012-0002-P1. STRIPTWEEZ WIRE STRIPPER TS15(handpiece only, no tips or cables) It comes as pictured(actual item pictured) Retails for $349.52-$373.78 at Stanley Supply. Posted with
|
|
|
2 Rolls of Solder 1-1/2 lbs (60/40 + 50/50)
2 Dutch Boy Solder Rolls. 1 roll 60/40 12 oz. 1 roll 50/50 12 oz. Neither is a full roll but together weigh over 1 lb. 8 oz. 24 oz.
|
|
|
10 PLUS LBS of lead wiping solder, around 38% tin PLUSRCBS ingots
10 Lbs plus of lead solder star sticks. Not Stained Glass"Came" of the U and H shaped. Educated guess would be 38% tin content 62% lead based on basic wiping alloy rations. Melted down a little bit of it. Too hard to scratch with a finger nail but does dent when banged up against Linotype lead ingots INCLUDED ARE 2 RCBS WIPING SOLDER INGOTS. When banged up against one another. The consistency of the dent is equal on both ingots.
|
|
|
1 lb 11 oz roll EutecRod 157 B Solder stainless steel-dissimilar metals craft NR
YOU ARE BIDDING ON A USED PARTIAL ROLL OF EUTECROD 157 B SOLDER. SEE PHOTOS FOR INFORMATION. CAME FROM ESTATE. HAS SOME OXIDATION.see photos) SOLD AS FOUND AS-IS. WEIGHS ABOUT 1 POUND 11 OUNCES AS SHOWN. NO RESERVE.
|
|
|
COLDHEAT CORDLESS SOLDERING TOOL WITH CASE AND SOME PAPERWORK
Up for auction is a Coldheat cordless soldering tool with the case and paperwork. Very little use if any and in working order. The piece has batteries installed not sure how old they are but will go to the buyer as well. Please check out pictures. Feel free to ask questions and thank you for looking.
|
|
|
Dutch Boy 8oz Solid Wire Solder 50/50 Diameter #9
In this lot we have a vintage spool Dutch Boy Solid Wire Solder 50/50 Diameter NO.9 about 8 ounces in this other one is empty Dutch boy Acid Core wire solder container nice collectable items
|
|
|
14oz. of Alpha Metals 12406 40/60 Acid Core SOLDER-Partial roll & Hydro Flow p
Up for sale are a roll of 14oz. Alpha metals 40/60 acid core solder. And a 2oz container of Alpha Metal HYDRO FLO(about 3/4 full) Water Soluble Soldering Paste Flux. These 2 items have been used.
|
|
|
Vintage Lot Ersin Multicore + Kester Plastic Core Solder
Rool#1 is Ersin 5 Core Multicore 50/50 on a wood spool with paper ends. This weighs 3 1/8 ounces gross. Rool#2 is Ersin 5 Core Multicore Non-Corrosive Flux(Extra Action) on a plastic spool. This weighs 15 ounces gross. Rool#3 is Kester Plastic Core Resin Filled on a metal spool. This is 9 5/8 ounces gross. BIDDING TERMS: NO RESERVE. IF MULTIPLE ITEMS ARE PURCHASED. I COMBINE PURCHASES TO SAVE SHIPPING. ANY MEASUREMENTS ARE APPROXIMATE. PLEASE NOTE I NEVER CLEAN ANYTHING. ITEMS ARE AS FOUND AND BUYER CLEANS IF DESIRED SO I DO NO DAMAGE. ESPECIALLY TO ANY VINTAGE ITEMS. THE SHIPPING AND HANDLING CHARGES SHOWN IS FOR SHIPPING TO THE LOWER 48 UNITED STATES ONLY. PLEASE E-MAIL ME AT LEAST 24 HOURS BEFORE THE END OF THE AUCTION WITH ANY QUESTIONS PRIOR TO BIDDING. PENNSYLVANIA RESIDENTS ARE BILLED 6% PENNSYLVANIA SALES TAX. PAYMENT TERMS: All auctions ... moremust be paid in full within 10 days of the close of the auction to avoid re-listing of the items for sale. Payment method accepted is Paypal. SHIPPING TERMS: Winning U. S. bidder will pay shipping as calculated by Ebay. At the end of the auction. The buyer must request any optional shipping method as well as any optional services or ship-to address. PLEASE NOTE I WILL BE VERY HAPPY TO SHIP ANYWHERE. AS LONG AS THE BUYER UNDERSTANDS I CAN NOT SHIP OUT OF THE LOWER 48 UNITED STATES FOR THE SHIPPING CHARGES SHOWN AND THE BUYER WILL BE RESPONSIBLE FOR ANY HIGHER SHIPPING CHARGES. ALSO, I WILL ALWAYS FILE 100% LEGAL CUSTOMS PAPERS. REFUND/WARRANTY POLICY: I stand behind my listings. So I do offer refunds for reasons such as the item arrived damaged or my description was incorrect or other reasonable problems. Please contact me by Ebay messaging and inform me of ANY problem you have. The refund will be less my shipping. Proof of delivery and any insurance costs. Any request for refund must be made within 30 days after receipt of the item. Proof of delivery and insurance is required on all returns. Buyer pays return postage. Unless damaged in shipping, the item must be retu
|
|
|
KESTER " 44 " ROSIN CORE SOLDER 60/40 .050" DIA. " 5 " POUND ROLL
One roll KESTER" 44" RESIN CORE SOLDER. 60% tin-40% lead, 0.050 dia. 4 pound, 13oz roll. made in USA.
|
|
|
Vintage Savbit Ersin Multicore Alloy 5 Core Solder Flux No. 1 NOS
Enter Text in Properties Inspector Enter Text in Properties Inspector Vintage Savbit Ersin Multicore Alloy 5 Core Solder Flux No. 1 NOS This auction features a vintage box of Ersin Multicore Savbit Alloy 5 core solder. This is a full box. It is marked NO. 1. Flux. 1 LB NETT 18 S.WC, on the end of the box. This is a rare item and hard to find. Winning bidder to pay $10 for careful shipping and handling. I am more than happy to ship internationally on this item. I will contact the winner afterwards with the exact amount for shipping. Please see additional. Enlarged pictures below. Enter Text in Properties Inspector_gsrx_vers_526(GS 6.6.6(526)
|
|
|
VINTAGE LEI Solid Wire Solder METAL ROLL 95/5 LEAD FREE 6 OZ
VINTAGE ROLL OF LEI WIRE METAL SOLDER' 6 OZ 95/5 LEAD FREE
|
|
|
Kester 44 Resin Core Solder 60/40 Alloy .040 Dia.
Kester 44 Resin Core Solder 60/40 Alloy.040 Dia. Description: Kester 44 Resin Core Solder 60/40 Alloy.040 Dia. This is a barely used spindle of Kester 44 Resin Core Sokder. The spool is almost full. Please see the pictures for details. We accept PayPal. Item to be shipped via USPS Priority Mail Check out my other items!
|
|
|
5 vintage rolls of solder-1 new 4 used-GARDINER DUTCH BOY ROSIN CORE KESTER ???
Up for auction are 5 rolls of solder From a local storage sale. Spools are in as found as shown condition. GARDINER- unused in box DUTCH BOY- 5.9 ounces ROSIN CORE- 11.1 ounces KESTER- 8.3 OUNCES UNMARKED- 10.6 OUNCES PLEASE READ BELOW BEFORE BIDDING* Outside of the USA please check shipping calculator before bidding* FREE DOMESTIC DELIVERY CONFIRMATION" I DO NOT FALSIFY AMOUNT ON CUSTOM FORMS" POST OFFICE WILL TRACK OUT OF THE COUNTRY PACKAGES UP TO THE POINT THAT THEY LEAVE OUR CUSTOMS. ONCE A PACKAGE LEAVES CUSTOMS WE ARE UNABLE TO TRACK IT AND HAVE NO CONTROL OVER AMOUNT OF TIME IT TAKES TO DELIVER A PACKAGE. COMBINED SHIPPING AVAILABE. BE ADVISED POST OFFICE HAS SIGNIFICANTLY INCREASED RATES. ITEMS GOING OUTSIDE THE U.S.A. OVER 4 LBS. HAVE TO GO PRIORITY AND THIS DOES INCREASE THE POSTAGE QUITE A BIT. EMAIL FOR MORE PICTURES ... moreIF NEEDED. ASK QUESTIONS Unless otherwise stated all of my items are in used condition from local estate and storage shed sales. If you have any questions about the condition or if you feel I have made a listing mistake please email me. I usually ship the day after payment is received and leave feedback when shipped. Sorry i do not end auctions early. PAYMENT DUE WITHIN 5 DAYS OF AUCTION END AND WILL BE BY PAYPAL ONLY. After auction end if you have changed your mind. Can not pay at the present time, or have other problems, please let me know. WE CAN ALWAYS WORK SOMETHING OUT. Also. If not satisfied with goods or service let me know. Satisfaction guaranteed.
|
|
|
Solder 5 Rolls Total wt. almost 3 lb.-LFI- Dutch Boy-Victory-Kester-Acid Core
Up for bid are these 5 different rolls of solder. 1st is an LFI wire solder 50/50. 2nd is a Victory. No lead, 95% tin 5% antimony 3rd is a roll of Dutch boy solid wire solder and this is 50/50. No.10 4th is a roll of Kester plastic rosin core solder 5th and last is a roll of Acid Core Solder. The total weight for all 5 rolls is just shy of 3 pounds This lot of 5 can be yours for a low bid.
|
|
|
Nassau B Stearine Western Electric Solder Core Audio Amp DIY
One roll of premium B Stearine solder there is a little less than 5lbs. Thanks
|
|
|
Mixed Lot 7 1/2 Pounds Wire Solder Plumbing & Radio 95/5, 50/50, 60/40 etc.
This auction is for a mixed lot of old wire solder(actual pictures of items being offered) The scales show 7.93 pounds. Minus the 4.3 ounce box leaves 7/1/2 pounds. Some of the solder is not labeled& some have corrosion. Shipping quote is for Priority Mail. Insured with tracking to the USA. If you have any questions, then feel free to ask. Happy Bidding NO RESERVE
|
|
|
KESTER '44' Sn60 Rosin Core 0.031" #66 QQS-571 WRAP-3 Solder 1lb roll
This is old stock wire solder from Kester. The label says Sn60 but doesn't states a specific composition so I'm assuming the rest 40% is Pb lead solder. Great all purpose solder. The roll has been open and a little used but not enough to reduce the weight much. The solder is in great shape. Anyway Kester is an excellent brand name in solder so you can't go wrong. Thanks for looking.
|
|
|
ALPHA METALS Solder 1lb roll 50/50? 0.062?
This is old stock wire solder from Alpha Metals. The label doesn't states a specific composition so I'm assuming it is standard 50/50 solder and the diameter appears to be.062" Great all purpose solder. The roll has been open and a little used but not enough to reduce the weight much. The solder is in great shape. Anyway Alpha Metals is an excellent brand name in solder so you can't go wrong. Thanks for looking.
|
|
|
Metcal SP 200 Smartheat Soldering System Model SP-PW1-10 SP1 73767
Metcal SP 200 Smartheat Soldering System Model click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge Description: Metcal SP 200 THIS ITEM IS USED AND has minor scuffs and scratches THIS ITEM ONLY COMES WITH WHAT IS SHOWN IN THE PHOTOS This item is used and in good shape. There are some scuffs and scratches but nothing major to out of the ordinary usage. Other then that this item is in good condition and works well. This item does not come with any other cables. No power cable and no other accessories. This only comes with the unit itself. Shipping: FREE SHIPPING Shipping& Handling: PAYPAL USERS, WE ONLY SHIP TO CONFIRMED USA ADDRESS IN PAYPAL NO EXCEPTIONS. We only ship to the lower 48 states. Additional charges will apply ... morefor shipping to Alaska. Hawaii, or Puerto Rico. International NO APO’s& FBO’s Bidders. Please contact before bidding. Pickups are welcome. C.A Residents must pay 7.75% tax. RETURN POLICY We accept returns ONLY if you receive the wrong item. Anything described as NEW will be charged 15% restocking fee plus two way shipping if it is opened. Buyer must return the item within 7 business days of receipt. If the seller is not. Available. Then a full refund will be issued. PLEASE KEEP IN MIND THAT IF WE HAVE ANOTHER ITEM TO EXCHANGE YOURS WITH WE WILL FIRST EXCHANGE IT. REFUNDS ARE LAST RESORT! Items returned for any. Other Reasons: will be Charge a 15% restocking fee +original and. Return shipping charges. Payment: Payment Methods PayPal. Transaction Terms All payments must be received within 3 business days of the end of the auction.
|
|
|
20 Bars Kester Solder 60/40 Tin Lead Ingots Total Weight 20 lbs 7 ounces
Up for sale is a lot of 20 Bars Kester Solder 60/40 Tin Lead Ingots Total Weight 20 lbs 7 ounces. Bars are marked SN60 QQ-S-57le Kester Solder 1 lb. Shipping rates are for the USA only. We will not ship this international. As we are a business all sales to buyers i n the state of Wisconsin will have 5.6% sales tax added. 5% for the S tate. 1/2% for County tax, and 1/10% for the Sta dium Tax. See our other listings for more products.
|
|
|
KESTER "44" Sn60 Resin Core Solder .031" #66 QQS-571 WRAP-3 Solder 1/2 lb roll
This is a 8 ounce KESTER"44" Sn60 Resin Core Solder.031" 66 QQS-571 WRAP-3 Solder 1/2 lb roll. This is a partially used roll. Photos show it on the scale. Why buy a pound when you probably only need a half! Please email me any questions before bidding. I try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. Thank you for looking and please check out my other listings! I accept payment via Paypal. Payment must be made within 24 hours of the end of the auction. I will ship within 2 business days of receiving payment. If"free shipping" is offered. It does not include international shipping or shipping to Hawaii or Alaska. Please message me before bidding and I will email you the shipping rate. If you are interested in purchasing more than one item/auction. Please ... moresend me a message and I will let you know if I can offer a combined shipping cost* I do not offer refunds on any item unless it's listed as returns accepted. It was grossly misrepresented or it was damaged during shipping. Refunds must be requested within seven days of item arrival. If there is a problem, we can work together to resolve the problem. I strive for positive feedback and harmonious relations. Please avoid making negative feedback remarks, contact me first if you have any problems! Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1444afe3464-0xf1-
|
|
|
vintage American Hardware 1 LB solder acid core wire solder
This is a vintage solder from about the 1960's when American Hardware was in business at Butler PA. Some of the solder has been used but very little as the package weighs over 1 LB. Information on the history of American Hardware can be seen at: Normal 0 MicrosoftInternetExplorer4 We are a PayPal“VERIFIED” Buyer/Seller…so bid with complete confidence. What is PayPal Verified? Merchants and Consumer Members who are verified are authorized to process transactions over $2000.00. For a merchant. Verification involves proving your shipping address and banking information. This is a procedure to prevent internet fraud. All items come from a smoke free home unless otherwise stated in auction. Items are being sold as described and as shown in Photos. If you are unsure of any descriptions or have questions. Please ask before bidding. This is for ... moreyour protection. We want you to be sure that what is described and shown in the photos is what you are expecting to receive. Shipping: We take pride in our feedback scores. Secure packaging and quick shipping. Note: We do not ship to Puerto Rico. APO or FPO without prior approval. We are not responsible for any goods that are lost or damaged in transit. Returns: We accept returns if the item(s) you receive are not the same as described or shown in photos. We will refund bid price only. Shipping fees are not refundable. All returns must be approved prior to you shipping them back to us. Email us and let us know what the problem is and we will work it out. Any auction items listed: AS IS will have no return policy. Payments: Payments must be received within 3 days of auctions ending time. Positive feedback will be left for bidders completing a successful transaction. Good Luck and hope you are the winning bidder!
|
|
|
Vintage Wire Solder, Coran Bros. Corp
Just to sit around for decoration. Any questions. Please ask. Smoke free home. If you would leave feedback for me after you receive your item. I will do the same for you. If you have an issue, please contact me before you leave negative feedback.
|
|
|
50/50 Federated Castomatic Solder Bar Weight 2 lb 6 oz
50/50 Federated Castomatic Solder Bar Weight 2 lb 6 oz CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. get what you see. weighs 2 pound 6 ounces for what is seen. One full stick and other part used. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE ... moreFOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. ANY REFUNDS GIVEN WILL BE MINUS SHIPPING COSTS.THE ONLY REASON ACCEPTED FOR RETURN IS IF A MISTAKE WAS MADE IN THE DESCRIPTION. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1445cdd67dd-0x118-
|
|
|
RadioShack 64-013 High-Tech Rosin Core Silver Bearing Solder .022" 62/36/2
RadioShack 64-013 High-Tech Rosin Core Silver-Bearing Solder Used a few times. More than a 1 ¼ oz. on roll. Please use PayPal to make fast. Easy, and secure payments for your purchases!
|
|
|
Blue Point By Snap-on 1970's Soldering Gun Iron Good Shape Working
Blue Point By Snap-on 1970's Soldering Gun Iron Good Shape Working
|
|
|
Vintage Federated Metal Division 5lbs. Rosin-Core Solder
Up for auction is a 5 pound can of Rosin-Core Solder made by Federated Metals Division American Smelting and Refining Co. Made in San Francisco. Still in really nice shape! Posted with
|
|
|
ALPHA METALS SOLID WIRE SOLDER 50/50 (7.7 oz)
Available is this. 7.7 oz. roll of Solid Wire Solder 50/50. Roll reads 8 oz. maybe some was used. Please view the pics and ask any questions. Concerns prior to bidding. Thanks!
|
|
|
Vintage General Electric GE Heavy Duty Soldering Gun Stainless Steel 200 Watt
Excellent General Electric big soldering gun for sale! Stainless steel. 200 watts, 115 volts. No damage at all, and seems to work great. Plastic or bakelite handle. Feel free to ask any questions. Thanks
|
|
|
Dutchboy 95-5 Solder Wire Lead Free Wire 1/8 Diameter Soldering wire
Dutchboy Lead Free Wire 1/8 Diameter THIS WIRE IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. IT IS MISSING SOME WIRE AND DOES NOT WEIGH 5 LBS AS SEEN ON THE TAG. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# D10XLCGSHECA APPROX. PRODUCT DIMENSIONS: WIDTH: 3.5" LENGTH: 3.5" HEIGHT: 3.5" SHIPPING WEIGHT: 9 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT ... moreOF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. C
|
|
|
turbo torch regulator 12 ft hose and handle 2 tips t-5 plus t-3 propane
hi here is a good used turbo torch for propane comes with 12 ft hose regulator and 2 tips tips may need to be cleaned have not used in a while look at pics thanks for looking
|
|
|
30 Watt Soldering Iron with T-Tip Adapter for BMW Mercedes Benz and SAAB lcd
USED BUT VERY GOOD CONDITION. I FIX MY CAR LCD RIBBON CABLE AND NOW IS FOR SALE. Very good soldering The(30-Watt. 220V, EU socket) Soldering Iron comes with a T-Tip adapter and Rubber Cable made for repairing and replacing car LCD ribbon cables. Compatible for many repairs including select BMW. Mercedes Benz, and SAAB lcd pixel repairs. I did not send to BELARUS. KAZAKHSTAN and NIGERIA.
|
|
|
TC Lot of 6 Rolls of Acid Rosin Solid Soldering Wire-5 Kester and 1 Unbranded
GB Lot of 6 Rolls of Acid Rosin Solid Soldering Wire-5 Kester and 1 Unbranded GB Lot of 6 Rolls of Acid Rosin Solid Soldering Wire-5 Kester and 1 Unbranded This listing is for a Lot of 6 Rolls of Acid Rosin Solid Soldering Wire-5 Kester and 1 Unbranded. I weighed all 6 of these rolls together and they weigh 4.96lbs which you can see by the picture I included with this listing. One of the rolls I am unable to read the label for it so I am just calling it unbranded but i have included pictures of it as well so maybe you will be able to identify it. Since each of these rolls are different from each other I will list them below in further detail: 1. Kester Industrial 60/40 Alloy Core: 60 Flux: Nosput Diameter: 080. The wire is wrapped around a metal holder which has some rust damage to it. This damage shouldn't affect the way the wire works ... moreat all. 2. Kester Acid Core Solder. This one has a green metal roll that it is rolled around. The wire appears to be in good condition except for the outer edges do have a little wear to them and the metal roll the wire is on does have some rust damage to it. 3. Kester Plastic Rosin Core Solder. This one has a red metal roll that it is rolled around. The wire appears to be in good condition there are a few spots where it appears to have some shelf wear. The metal roll the wire is on does have some rust damage to it. 4. Kester Flux Filled Aluminum Solder. This wire is wrapped around a metal roll that has a black and off white label. The wire appears to be in good condition with a few spots on it of shelf wear. The metal roll that the wire is on does have some rust damage to it. 5. Kester Solid Wire 50/50 Alloy.125 diameter. This wire is wrapped around a plastic roll that has a blue and white label. The wire appears to be in good condition with a few spots of shelf wear on it. The plastic roll that this wire is on does have some shelf wear as well. 6. The unbranded roll. The wire on this roll does have some shelf wear to it and the metal roll that it is on has so much rust damag
|
|
|
Lead Wiping Solder- 3 lbs- AMA Bars- 38/62 SN/PB Tin Lead
Lead Wiping Solder- 3lbs- AMA Bars- 38/62 SN/PB Tin Lead This is just under 3lbs of 38/62 A.M.A brand Solder which I assume is Tin(38% Lead(62% There is an additional 4 oz piece of what I believe to be 80% lead/ 20% Tin that is partially used. total weight is ca. 50 oz. These will ship curved into"C" shapes in a small flat rate box. Please see the last pic. Please review all pics and feel free to ask questions
|
|
|
TC Lot of 8 Rolls of Misc Soldering Wire And Some Loose
GB Lot of 8 Rolls of Misc Soldering Wire And Some Loose GB Lot of 8 Rolls of Misc Soldering Wire And Some Loose This listing is for a Lot of 8 Rolls of Misc Soldering Wire And Some Loose. I weighed all 8 of these rolls together plus the loose wire and they weigh about 4.93lbs which you can see by the picture I included with this listing. Since each of these rolls are different from each other I will list them below in further detail: 1. Forney Rosin Core Electrical Repair Solder. This wire is wrapped around a plastic roll with a blue and white label. The wire appears to be in good condition but does have some shelf wear to it. The roll the wire is wrapped around has some shelf wear to it as well. 2. Spartan Solder Rosin Core flux included. This wire is wrapped around a plastic roll with a blue and white label. The wire appears to be in good ... morecondition but does have some shelf wear to it. The roll the wire is wrapped around does have some shelf wear to it as well. 3. Stay-Brite Solder wire. This wire is wrapped around a metal roll with a green and black label. The wire appears to be in good condition with some shelf wear to it. The roll the wire is wrapped around does have some rust damage and some shelf wear. 4. Streamline No. 50 Solder 50% tin-50% lead diameter is 1/8. This wire is wrapped around a metal roll with a blue and white label. The wire appears to be in good condition with a little shelf wear. The roll the wire is wrapped around does have some shelf wear as well as some rust damage. 5. Spartan Solder Solid Wire. This wire is wrapped around a roll that is plastic with a red and white label. The wire appears to be in good condition with a little shelf wear. The roll the wire is on has some shelf wear to it as well. 6. Dunlap Rosic Core Solder Wire. This wire is wrapped around a roll that is metal with a orange and white label. The wire appears to be in good condition with a little shelf wear. The roll that the wire is wrapped around does have a little shelf wear too and when you look inside of the roll
|
|
|
TC Lot of 5 Rolls of Misc Soldering Wire And 1 Tube-Spartan Weller Dutch Boy ETC
GB Lot of 5 Rolls of Misc Soldering Wire And 1 Tube-Spartan Weller Dutch Boy ETC GB Lot of 5 Rolls of Misc Soldering Wire And 1 Tube-Spartan Weller Dutch Boy ETC This listing is for a Lot of 5 Rolls of Misc Soldering Wire And 1 Tube-Spartan Weller Dutch Boy ETC. I weighed all 5 of these rolls together plus the wire in the tube and they weigh about 3.33lbs which you can see by the picture I included with this listing. Since each of these rolls are different from each other I will list them below in further detail: 1. Spartan Solder Acid Core Flux Included. This wire is wrapped around a plastic roll that has a pink and white label. The wire is in good condition with a little shelf wear. The roll the wire is wrapped around has some shelf wear to it as well. 2. Dutch Boy Solid Wire Solder 50/50 grade diameter is no 10. This wire is wrapped around ... morea metal roll that has a orange and black label. The wire is in good condition but does have a little shelf wear. The roll the wire is wrapped around has some shelf wear and some rust damage to the edges. 3. Weller 40/60 Alloy 1/16" diameter acid core solder. This wire is wrapped around a metal roll that has a red and white label. The wire is in good condition but does have some shelf wear. The roll the wire is wrapped around does have some shelf wear and a little rust damage to the edges. 4. Solder Acid Core. This wire is wrapped around a metal roll that has a red and white label. The wire is in good condition with a few spots of shelf wear. The roll the wire is wrapped around has some shelf wear and is quite bent on one end as well as some rust damage in several spots. 5. Dutch Boy 40/60 Solid Wire Solder. This wire is wrapped around a metal roll that has a orange and black label. The wire is in good condition with a few spots of shelf wear. The roll the wire is wrapped around has some shelf wear well and some rust damage to the edges. 6. Helpmate General Purpose Acid Core Solder For Non-Electrical purposes 50% tin 50% lead. The wire is in a plastic tube. The wire that
|
|
|
20 lbs of solder johns manville stain glass solder
lot of 3 spools of solder. Iam not sure what lead content the sold has, it melts vary easy with a torch, 2 of the spools has a johns manville label, one reads style c 10 size 1/4, this sould not be used for plumbing etc, please look at photos CAREFULLY FOR STYLE AND CONDITION. BEING SOLD AS IS, NO REFUNDS OR WARRANTY'S EXPRESSED OR IMPLIED. THANK YOU.
|
|
|
Big Lot Used Wire Solder,CANFIELD,KESTER,OATEY,FLO-TEMP,SPARTAN,etc.Solder,Look
Great big lot please see all pictures thanks for looking please see my other items!
|
|
|
Vintage Snapit Rosin Core Solder # 844 Tin Can
Up For Auction Vintage Snapit Rosin Core Solder# 844 Tin Can.The Can Is In Good Shape But The Paint Got Sum Scratches. Thanks For Looking.
|
|
|
Specify Products Wire Solder 1lb-12.6oz roll 50/50? 0.063
Specify Products Wire Solder 1lb-12.6oz roll 50/50 0.063 thick
|
|
|
OK Industries Inc SA-5201 Wave Solder *VIDEO IN DESCRIPTION*
OK Industries SA-5201 Wave Solder. As you can see it is still in good working condition. This unit was approximately $3.000 new. I can't find anymore of this same model online anywhere. So this very well may be the only one out there for sale. Also comes with Gloves. The shipping charges are high. But this machine is very heavy due to the amount of lead and tin. Please feel free to inquire for more information. We only ship to the Lower 48 states.
|
|
|
Kester Solder Set 4pcs
Kester Solder Set 3pcs: 1 LB(454 g) Organic Core.8mm(031) 10.6 oz* 1 LB(454 g) Lead Free.8mm(031) 8.5 oz* 1 LB(454 g) Rosin Core.25mm(010) 6oz* 1 LB(454 g) Tin Lead Rosin.010(15.8oz* 1 LB=16 oz) Unpacked but in good condition. See pictures.
|
|
|
Dutch Boy 1 lb spool Acid Core Solder 40/60 #11
Du tch Boy 1 lb spool Acid Core Solder 40/60#11 Up for auction is a Dutch Boy 1 lb spool of 40/60#11 Acid Cord Solder slightly used. The spool is not marked anything more than this so I really need you to look closely at pictures– reason I did close ups! I am selling items for my grandfather so I personally do not know much about solder besides providing the information that is on the spool. I would ask that you look at the p ictures as they are part of my description and what you see is what you will be getting! You may be interested in on eBay. I gladly ship internationally. If international shipping prices are not listed. You can use the shipping calculator provided to determine your shipping. Returns& Cover All" Disclaimer: I sell many kinds of items. Some of the items may be brand new however majority of them are old. Previously ... moreowned, etc. and I do not have knowledge of their previous use or care unless stated. In most cases, I do not know the surroundings of the items before I actually acquire them. Old/used items may have flaws and/or imperfections. I realize that it is sometimes difficult to accurately judge an item from a picture on a computer monitor. For these reasons, please don't assume an item is in mint condition unless I state that in my description. Normally I do not list items with"issues" unless I am aware that it still has value. If I see an item is broken, chipped, etc. it is stated in the description. It is possible that I will not see something that someone else considers to be an imperfection so I urge you to ask any questions to the condition, quality, size, etc. of an item BEFORE bidding. I would rather not sell an item, than to have a problem. I try to make the description as thorough as possible and include pictures for you to make your bidding decisions. If that leaves unanswered questions in your mind, PLEASE ask before you bid. All conversation MUST go through Ebay messaging ONLY! I will not respond to any emails outside of Ebay. I WILL ONLY SHIP TO the addre
|
|
|
Lot of 3 - 1 lb Spools of Rosin Core Solder: Gardiner, Kester & Top Line
Lot of 3- 1 lb Spools of Rosin Core Solder: Gardiner. Kester& Top Line Up for auction is one(1) 1 lb Spool Gardiner. 1) 1 lb Spool of Kester, and(1) 1 lb Spool of Top Line Rosin Core Solder. The spools are not marked so I do not know their sizes so I really need you to look closely at pictures– reason I did close ups! I am selling items for my grandfather so I personally do not know much about solder besides providing the information that is on the spool. I would ask that you look at the p ictures as they are part of my description and what you see is what you will be getting! You may be interested in on eBay. I gladly ship internationally. If international shipping prices are not listed. You can use the shipping calculator provided to determine your shipping. Returns& Cover All" Disclaimer: I sell many kinds of items. Some of ... morethe items may be brand new however majority of them are old. Previously owned, etc. and I do not have knowledge of their previous use or care unless stated. In most cases, I do not know the surroundings of the items before I actually acquire them. Old/used items may have flaws and/or imperfections. I realize that it is sometimes difficult to accurately judge an item from a picture on a computer monitor. For these reasons, please don't assume an item is in mint condition unless I state that in my description. Normally I do not list items with"issues" unless I am aware that it still has value. If I see an item is broken, chipped, etc. it is stated in the description. It is possible that I will not see something that someone else considers to be an imperfection so I urge you to ask any questions to the condition, quality, size, etc. of an item BEFORE bidding. I would rather not sell an item, than to have a problem. I try to make the description as thorough as possible and include pictures for you to make your bidding decisions. If that leaves unanswered questions in your mind, PLEASE ask before you bid. All conversation MUST go through Ebay messaging ONLY! I will not
|
|
|
1.11 LBS 50/50 VINTAGE SOLDER ROSIN CORE randy wire .125 .041 composition lot
VINTAGE SOLDER SPOOL LOT TOTAL WEIGHT 1 LB 11 OZ DEPENDA-BOND SOLDER.125 DIA 50/50 WEIGHTS 1 LB 4 OZ COMPOSITION RANDY WIRE SOLDER F5-316 CONDITION A.041 DIA WEIGHT- 7 OZ
|
|
|
3.3 LBS 60/40 KESTER PLASTIC VINTAGE SOLDER ROSIN CORE P-5 AKF 1.09
VINTAGE" KESTER" SOLDER SPOOL PLASTIC ROSIN CORE 3.3 LBS! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144a0124ff5-0x115-
|
|
|
9 LBS 60/40 ALLOY ALPHA SOLDER .062 DIA VINTAGE SOLDER LOT CEN TRI CORE
VINTAGE" ALPHA" SOLDER LOT OF 2 SPOOLS OVER 9 LBS! CEN-TRI CORE ROSIN ALLOY: 60/40 DIAMETER-062 1 SPOOL WEIGHS 5 LBS 1 SPOOL WEIGHS 4 LBS 6 OZ
|
|
|
KESTER "44" RESIN CORE SOLDER .062 DIAMETER 58 CORE sn60 ALLOY 5 lb.
thank you for stopping by Listed is Vintage Kester Solder"44" resin core solder core sn-60 dia.062 Alloy Sn60 QQS-571 over 5 lb spool
|
|
|
Nassau Spec AT-7076 Rosin Core Solder and Plumbcraft Rosin Core Solder
Almost a full 1 pound roll of 0.094 inch diameter Nassau Water White Rosin Core Solder- Western Electric spec. 7076 A partial roll of 0.120 inch diameter Plumbcraft rosin core solder with about 10 ounces left on. Plumbcraft stock number 71-014 I work very hard to maintain positive feedback for that reason. I will not ship this item outside of the U.S. Please do not bother bidding if you are at the following addresses as I will not ship to you regardless of which user id is used. 14547 155th St Jamaica. NY 11434 5160 Rivergrade Rd Baldwin Park. CA 91706 2522 Continental Ave El Monte. CA 91733-2733
|
|
|
Kester .062 inch Dia 60/40 resin five Solder NEW OLD STOCK 4 1lbs rolls
Up for auction are four new old stock 1 pound rolls of Kester resin five solder. The make up is 40/60 and is a.062 diameter. Purchased recently. They are as found in their original boxes. A couple of the rolls have dents on the spool top or bottoms Please see pictures for Information and condition, any information will be appreciated. buyer pays shipping and delivery confirmation usps pacel post mail. thanks for looking.
|
|
|
Kester SN63PB37 Solder Roll, .89lbs, Dia. .125, Core 66, Flux 331
Kester 1 Kester SN63PB37 Solder Roll.89lbs. Not full Dia. 125. Core 66, Flux 331 Please don't hesitate to ask questions. Thanks for taking a look! We will gladly combine items won or purchased on the same day to save on shipping charges. Please ask if an exact quote is needed. Payment is requested in 4 days. On day 5. Ebay's new automated UPI process starts. Our feedback is automated. Once received, it is automatically given. Thanks for looking!
|
|
|
Kester Solder SN96.5AG03CU.5 #58/275 1.5MM (.062") 24-7068-7607 ANSI-J-STD-006 A
Kester Solder SN96.5AG03CU.5#58/275 1.5MM(062" 24-7068-7607 D.O.M 08/04/08 Shipping $8.50.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-144a9ef7cdd-0xfe-
|
|
|
radio shack rosin core solder wire 60/40 8oz
i have rosin core solder standard radio shack 8 oz roll of solder for sale any questions just ask thanks happy bidding
|
|
|
Plumbers Solder, Pure Tin, and Lead
Plumbers solder. Pure tin and lead weighing about 8-10lbs altogether. 2 are solder, 1 is tin, 1 is lead and not sure about rot metal. Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144aa7bc282-0xf5-
|
|
|
Kester Solder QQS-571 Sn63 Dia .015 Flux 282 Core 58 14 oz
Kester Solder QQS-571 WRMA-P2 14 oz Alloy: Sn63 Dia: 015. Flux: 282 Core: 58. We combine shipping. Powered by
|
|
|
2.3 Lbs USED FRY SOLDERS: 1.14 Lbs DIA. 093 & 5 Oz DIA. 125
2.3 Lbs USED FRY SOLDERS: 1.14 Lbs DIA. 093& 5 Oz DIA. 125 You will receive quantity of 3(three) solders. See pictures. What you see on the picture is what you will get. Shipping We ship the item within 1 business day after payment is received. We ship Worldwide. We will only ship to the confirmed address on the account. Payment We accept payment via PayPal. Sales tax applies in Wisconsin; taxes will be calculated at checkout. Return Policy We offer a 30 day return policy. Items are only returnable if they have original packaging. Buyer pays return shipping. On free shipping items. You will still be responsible for the outbound shipping charges incurred by Home and Living. There is 20% restocking fee from the purchase price if item is not defective upon our inspection. Or wrong item ordered. Shipping fees are not refundable. Products ... moremay be returned without restocking fees if they have been damaged during shipping and are no longer in flawless condition or if they contain blemishes or defects caused by the manufacturer. All damaged products must be reported to us no longer than 30 days after delivery has been completed. To report a damaged item please email us through your eBay account. We usually respond to all damage-related issues within 1 business day. B-32-F-3-4-ARK Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Assorted 1lb Lot of Solder | N901117 | 212464 | 311075 | 29965 | 10410091
ebay template We answer all e-mails, Monday to Friday 8am- 5pm est. Please contact us using"Ask a question" link at the bottom of this page. You are bidding on one Solder with the following specifications: QTY: 1 Manufacturer: Various Part Number: Various Category: Solder Type: Solders, Sample Part numbers Include: 1) N901117. 2) 212464. 3) 311075 Also Includes: 29965. 10410091. This auction only includes what is shown in the photographs. If it is not shown. Please assume it is not included. Please ensure this item is compatible with your intended application before placing a bid. This item has cosmetic scratches/scuffs on its case. As shown in the attached photographs. This item is for domestic shipping only. No international bidders please; if this auction is won by an international bidder, we will automatically issue a refund ... moreof the purchase price and/or a request to cancel the transaction. This purchase can be made with complete confidence because we offer a 14 day. Money back guarantee. This item is used and untested; we unfortunately do not have the means to test for power. Fit and function; therefore, we cannot guarantee it will operate as intended. This item will ship from our Louisville. KY facility. Please bid accordingly. Our shipping carriers are UPS and USPS. Any orders of $250.00 or more will be shipped with Signature Required. Please make sure you are available to sign for these orders. We ship Monday-Friday. Please allow up to 3 days after payment is received for shipment. We ship to the Continental US on all of our auctions. For items shipping freight. You will be responsible for arranging the freight shipment. Please contact customer support for accurate weight and dimensions. Buyer is responsible for shipping insurance. Some items are shipped to Canada and/or Overseas. We ship up to 75 pounds overseas via USPS. You are responsible for all customs fees and duties. Please read the auction description. Buyer is responsible for import fees/tax/duties. We will not mark your purchase as a g
|
|
|
Mixed Lot Wire Solder Don't over look this item ! {BUY IT NOW} (HURRY) ! !
You be the judge. See all Pictures/hopefully I have showed enough angles for you to see the value in the lot! BID! BID! BID! I just like it when They say SOLD! LOL THE FIRST KESSLER ALONE RETAILS $28.+- GO TO WEB AND CHECK THEN ESTIMATE USING PICTURES! YOU WILL BE SOLD! NOTE NOTE NOTE: I believe that I can bend the medal spool of the large item and ship in a flate rate priority cheaper than the box. You decide and pick $12.35 or $5.60! shipping.
|
|