|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$4.38 Shipping Condition: New Location: China 模板预览 PICTURES, DESCRIPTION, Features: SX460 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator(AVR) and forms part of the excitation ... moresystem for a brush-less generator.In addition to regulating the generator voltage. The AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals. Positive voltage build up from residual levels is ensured by the use of effcient semiconductors in the power circuitry of the AVR. Provision is made for the connection of a remote voltage trimmer. Allowing the user fine control of the generator's output. Specifications: INPUT, Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1, OUTPUT, Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum, REGULATION, +/1.0% THERMAL DRIFT, 0.05% per deg. C change in AVR ambient, TYPICAL SYSTEM RESPONSE, AVR response: 20 ms, Filed current to 90% 80 ms, Machine Volts to 97% 300 ms, EXTERNAL VOLTAGE ADJUSTMENT, +/10% with 1 k ohm 1 watt trimmer, UNDER FREQUENCY PROTECTION, Set point: 95% Hz, Slope: 170% down to 30 Hz, UNIT POWER DISSIPATION, 10 watts maximum, BUILD UP VOLTAGE, 4 Volts@ AVR terminals, ENVIRONMENTAL, Vibration: 20-100 Hz 50mm/sec, 100Hz-2kHz 3.3g, Operating Temperature:40°C to + 60°C, Storage Temperature:55°C + 80°C, Relative Humidity 0-70°C:95% Size: 13.4cm x 9.8cm x 3.5cm, Notes: 1.With 4% engune governing. 2.After 10 minutes. 3.Applies to Mod status F onwards. Generator de-rate may apply. Check with factory. 4. Factory set. Semi-sealed, jumper selectable. 5. Non condensing. Package Included: 1 x SX460 Automatic Voltage Regulator, NO Retail Box. Packed Safely in Bubble Bag. SHIPPING, All the items will be dispatched within 1 business day by Hong Kong Airmail after the payment is clear. Items will arrive in 7-25 business days. The arrival time depends on some factors and different areas: Please choose so
Buy It Now
$16.90 Shipping Condition: New Location: China The Stamford MX341 is a two-phase sensed AVR that creates part of the excitation system for a brushless generator. Key features of the Stamford AVR MX341 ... moreIt is also mounted on anti-vibration mounts for protection against engine vibrations.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Actuator performance electronic speed governor ESD5500E MSP6729 Sensor Description: Brand New ESD5500E Series Speed Governor Item Specifics: ●ESD5500E ... moreseries speed governor is high cost effective,the best quality,large stock,lower price,perfectly electric speed governor. ●Widely used to all kinds of generator together with ADC120 12V ,high performance and perfectly realize electronic speed governor. Color: As shown in picture Package Included: 1x ESD5500E speed controller 1x MSP6729 Magnetic Speed Sensor 1x ADC120 actuator Speed Sensor MSP6729 Specifications: Inductance：142MH+25% Resistance：300 Ohms Maximum Thread Size: 3/8-24UNF-2A Proximity to Gear Teeth：0.025-0.035in.(0.64-0.89mm.) Temperature Range：-55℃ to 105℃ IDLE Ouput：1.5 volts AC minimum Max Output：30 volts AC.
Buy It Now
Free Shipping Condition: New Location: China In the power circuitry of the AVR.
Buy It Now
Free Shipping Condition: New Location: China Model: 3408324. Easy Installation: The actuator is easy to install on the generator, can be used for replacing broken original part, very practical and ... morefunctional. Item Type: Generator Actuator. High Precise: The actuator is highly precise, with small space between the friction surfaces of the relative motion, the rotation is very flexible.
Buy It Now
$5.00 Shipping Condition: New Location: China DC80D MK II: used for single machine automation. Start/Stop through remote start signal. DC80DR MK II: Based on DC80D MK II, it adds RS485 port. 1 phase ... more2 wire: 20VAC-276VAC(ph-N). 2 phase 3 wire: 20VAC-276VAC(ph-N).
Buy It Now
$6.88 Shipping Condition: New Location: China Various of crank s(RPM,Frequency, Oil Pressure) can be chosen. Generator current A. Generator Frequency Hz. Generator active power KW. 1 switch value ... moreinput, and each can be set as max 20 functions. The waterof can reach IP54.
Buy It Now
Free Shipping Condition: New Location: China Part No.:SYC6714. Sereis: ESD2210, ESD5111, ESD5221, ESD5500, ESD5522E, ESD5550E, ESD5570E, ESD5330, LSM672N, SYC6714. Synchronizer Enabled:Red LED. Other ... moreSpeed Governors: S6700E, S6700H. Generator:Red LED.
Buy It Now
$15.00 Shipping Condition: New Location: China Temperature drift:
Buy It Now
$1.84 Shipping Condition: New Location: 金东区, China
Buy It Now
$29.90 Shipping Condition: New Location: 金东区, China It works for a variety of stand-alone applications. Power-saving mode. Custom hierarchical load output. Preset engine start and stop cycles. Engine speed ... moreprotection. Unit/load power monitoring (kW, kVA, kVAr, pf).
Buy It Now
Free Shipping Condition: New Location: China 10Pcs CAT40 45° 0.589" Degree Pull Stud Retention Knob Fits HAAS CAT CNC Black. 4: The module has an extensive list of features including enhanced event ... moreand performance monitoring and remote communications.
Buy It Now
Free Shipping Condition: New Location: China Speed Control Unit PER5500E I.Specification: TECHNICAL SPECIFICATIONS: Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor ... more1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun IDLE Adjustment 160 ± 20Hz ~ 60% of set speed Droop adjustment Min.K-L Jumpered) 15Hz. ± 6Hz. per 1.0 A change Droop adjustment Max.K-L Jumpered) 400Hz. ± 75Hz. per 1.0 A change Droop Adj. Max. K-L Jumpered) 875Hz. ± 75Hz. per 1.0 A change Droop Adj. Min. K-L Jumpered) 15Hz. ± 6Hz. per 1.0 A change Speed Trim Range ± 200Hz. Remote Variable Speed Range 500-7.5Hz. or any part thereof Terminal Sensitivity J: 100Hz. ± 15Hz/Volt@ 5.0 K Impedance L: 735Hz. ± 60Hz/Volt@ 65 K Impedance N: 148Hz. ± 10Hz/Volt@ 1Meg. Impedance P: 10V DC Supply@ 20ma Max. Speed Switch Adjustment Range 1000-10000Hz. ENVIRONMENTAL: Ambient Operating Temperature Range-40°c to +85°c Relative Humidity up to 95% Storage Temperature-55°c ~ 90°c Shock 20-100HZ 500mm/Sec. INPUT POWER: Supply 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) Polarity Negative Ground(Case Isolated) Power Consumption 50mA continuous plus actuator current Actuator Current Range@ 25°c-Inductive Load) Min. 2.5 Amps. Max. 10 Amps continuous Speed Sensor Signal 0.5-120 V RMS Speed Switch Relay Contacts(N.O.and N.C. 10Amp PHYSICAL Weight 650g Note: The performance parameters in the frequency when measuring 4000Hz If you need other models. Please feel free to contact us,thanks! Or click follow picture and find it yourself.Thanks again! Email: will(at)jeenda.com Skype: willamb2012 Tel:86 18657106746 Features: You can choose different shipping terms according to your different time requirements.As usual.We would deliver your order by FedEx express and it usually takes 3-4 wordays to your place. And we have these items in stock,so our handling time is just one workdays.If you need them urgently,we can meet your demands perfectly. International Buyers– Please Note： ●
Buy It Now
Free Shipping Condition: New Location: China Magnetic Pick up MSP6729 rotate speed sensor Generator parts Description: Specification: MSP6729 3/8- 24 UNF Threaded 2.5" Length with 6' Shielded ... moreCable All are designed and tested to operate within a temperature range of-65°F to 225°F(55°C to 105°C) Magnetic Speed Sensors are with Wire Leads Item Pickup Length Thread Length Lead Length Thread Size Drill Size MSP 6729 2.7 2.25 72.00 3/8-24 UNF-2A.332 Introduction: The magnetic speed sensor indicates when ring gear teeth. Or other ferrous projections, pass the tip of the sensor. Electrical impulses are induced within the coil and sent to the speed control unit. The signal from the magnetic speed Sensor. Teeth per second(HZ) is directly proportional to engine speed. Description: The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine. The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor the locknut. With the engine stopped. Screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit. The leads may need shielding if they are longer than 10 ft. 3m) Or if external interference is present. Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end. Note: The Economy Int'l Shipping don't ship to follow places: Australia- City Postcode Lord Howe Island 2898 Norfolk Island 2899 Christmas Island 6798 Coco(keeling) Island 6799 Antarctica 7151 If you need other models. Please feel free to contact us,thanks! Email: will(at)jeenda.com Skype: willamb2012 T
Buy It Now
Free Shipping Condition: New Location: China It can be started and stopped manually or via a remote start/stop signals. Generator Power kW Generator Current A. - Multiple crank disconnect conditions ... moreto select (engine speed sensor, oil pressure, generator frequency);.
Buy It Now
$16.00 Shipping Condition: New Location: China Ø Multiple crank disconnect conditions (speed sensor, oil pressure, generator frequency) are optional. Ø Equipped with CANBUS port and can communicate ... morewith J1939 genset. In one word,JEENDA aims to provide one-stop service for your generator spare parts demand.
Buy It Now
$16.90 Shipping Condition: New Location: China And protection features. The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine ... morecoolant temperature, engine running hours and battery.
Buy It Now
$5.00 Shipping Condition: New Location: China DC62DR: Add RS485 interface on the basis of DC62D. - With RS485 interface, the function of "three remotes" can be realized by using protocol for MODBUS; ... more(Only for DC60DR and DC62DR). DC60DR: Add RS485 interface on the basis of DC60D;.
Buy It Now
$29.99 Shipping Condition: New Location: China Genset working plan can be set as per week or month. Generator 3 phase current A. Generator Frequency Hz. Generator Power Factor COSφ. Generator active ... morepower KW. Generator apparent power KVA. 5 switch value input, and each can be set as max 30 functions.
Buy It Now
Free Shipping Condition: New Location: China The Propose employs surface mount technology (SMT) for high integration of features in a minute footprint AVR. Thermal Drift:0.04% per deg. C change in ... moreAVR ambient. Typical system response AVR response :20ms.
Buy It Now
Free Shipping Condition: New Location: China ADC225-12V Actuator ESD5111E controller MSP675 Sensor Each One Piece 1.Specification(ESD5111) The speed controller is a closed-loop control of the entire ... moreelectronic design. It's instantaneous load changes quickly and with precision control in response to engine speed when connected to the match and the implementation of e-speed magnetic sensor signals can be Control of a wide range of engines. It is designed to be highly reliable. The engine can withstand the surrounding area within the range of electromagnetic interference. In the design. Installation and a simple pre-adjustment, including the transfer rate and adjustable idle for assistance or for multiple special-purpose machine input, as well as to prevent reverse battery voltage, the transient voltage pulse, the actuator short-circuit fault And the loss of power or speed sensor signal of the security protection. PERFORMANCE Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun Idle Adjust CW Min. 1200Hz. below set speed Idle Adjust CCW Min. 4100Hz. below set speed Droop Range 1-5% regulation Droop Adj. Max. K-L Jumpered) 875Hz. ± 75Hz. per 1.0 A change Droop Adj. Min. K-L Jumpered) 15Hz. ± 6Hz. per 1.0 A change Speed Trim Range ± 200Hz. Remote Variable Speed Range 500-7.5Hz. or any part thereof Terminal Sensitivity J: 100Hz. ± 15Hz/Volt@ 5.0 K Impedance L: 735Hz. ± 60Hz/Volt@ 65 K Impedance N: 148Hz. ± 10Hz/Volt@ 1Meg. Impedance P: 10V DC Supply@ 20ma Max. Speed Switch Adjustment Range 1000-10000Hz. ENVIRONMENTAL Ambient Operating Temperature Range-40°c to +85°c Relative Humidity up to 95% Storage Temperature-55°c ~ 90°c Shock 20-100HZ 500mm/Sec. INPUT POWER Supply 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) Polarity Negative Ground(Case Isolated) Power Consumption 50mA continuous plus actuator current Maximum Actuator Current at 25 10Amps continuous Speed Sensor Signal 0.5-120
Buy It Now
$5.00 Shipping Condition: New Location: China Generator current A;. - Generator frequency Hz;. Designed with waterproof ring, the protection performance of the panel after installation reaches IP54;. ... moreVarious combinations of starting conditions (speed, frequency, oil pressure) are optional;.
Buy It Now
Free Shipping Condition: New Location: China All outputs function executed by a set of traditional relays which make it possible to support heavy power handling capability. Relay Output. Power Consumption. ... morePanel Cut-Out(W H). Valve Output: 2 A.
Buy It Now
Free Shipping Condition: New Location: China It works for a variety of stand-alone applications. Generator frequency and CAN detection speed. Three-phase generator detection. Power-saving mode. The ... morelargest backlit graphic display of its kind. Preset engine start and stop cycles.
Buy It Now
Free Shipping Condition: New Location: China 3 phase generator monitoring. Insulating intensity object: input/output/power. Alternator Input Range -LED and LCD alarm indication. -Hours counter. -Hours ... morecounter provides accurate information for monitoring and maintenance periods.
Buy It Now
Free Shipping Condition: New Location: China Product description: The product is used for diesel engine throttle control, regulating the speed of the engine, with front and rear limit switch controls ... morethe stroke size. Steel wire rope: 185cm long, with protective sleeve Wire sheath: 170cm Rated voltage: 12V/24V Maximum stroke: 13.8cm Tensile strength: 100N if buyer need 24V item please purchase another listing we gurantee the quality.any quality problem we will be responsible for users.full return and paying the return shipping cost. Tks On Nov-03-12 at 09:26:10 PDT. Seller added the following information:
Buy It Now
$8.00 Shipping Condition: New Location: China DC60DR: Add RS485 interface on the basis of DC60D;. DC62DR: Add RS485 interface on the basis of DC62D. - With RS485 interface, the function of "three ... moreremotes" can be realized by using protocol for MODBUS; (Only for DC60DR and DC62DR).
Buy It Now
Free Shipping Condition: New Location: China All outputs function executed by a set of traditional relays which make it possible to support heavy power handling capability. Alarm Output: 2 A. Valve ... moreOutput: 2 A. Start Output: 2 A. Stop Output: 2 A.
Buy It Now
Free Shipping Condition: New Location: China Generator frequency. It has a variety of alarm protection functions. Alarm protection. External parking alarm. Standard waterproof ring. The rear panel ... morehas anti- function. Alarm output: 16A. Power consumption: 2W.
Buy It Now
$9.88 Shipping Condition: New Location: China Start running: Switch “I ” to “II” till engine started. Once power on the engine, it will be cranked. Power on : Switch “0”to “I” till the tube is lighted, ... moreIn the cession of cranking, over speed indicator will be lighted if the crank is not successful after 45sec.
Buy It Now
Free Shipping Condition: New Location: China High Sensitivity and stable at Low Frequency Variations. Idle Speed Frequency Adjustable From 30~85% of normal. Frequency Range 600 Hz ~ 9500 Hz (PMG ... moreSignal). Speed Band ± 0.25% at Steady State. Works on a wide ranges of MPU/flywheel frequencies.
Buy It Now
Free Shipping Condition: New Location: China DSE7320 has been added mains electricity monitoring function. Module has USB, RS232 and RS485 interface, and a port used for extension. Module has 12-channel ... moreoutput and 8-channel input, program can be set by panel and PC software.
Buy It Now
Free Shipping Condition: New Location: China Mains Frequency (only for DC62D). Genset working plan can be set as per week or month. Generator 3 phase current A. Generator Frequency Hz. Generator ... morePower Factor COSφ. 5 switch value input, and each can be set as max 30 functions.
Buy It Now
$6.99 Shipping Condition: New Location: China Mains Frequency (only for DC62D). Genset working plan can be set as per week or month. Switch value input:Available if connecting with Battery -. Generator ... more3 phase current A. Generator Power Factor COSφ.
Buy It Now
Free Shipping Condition: New Location: China Genset working plan can be set as per week or month. 5 switch value input, and each can be set as max 30 functions. Acrylic material is adapted to protect ... morethe screen. Indicator and number display through UI surface.
Buy It Now
Free Shipping Condition: New Location: China The module has been designed to work with electronic and non-electronic engines providing advanced engine monitoring and protection features. Digital ... moreInputs and Outputs: Six digital inputs and four outputs for customization.
Buy It Now
$3.00 Shipping Condition: New Location: China DC62DR: Add RS485 interface on the basis of DC62D. - With RS485 interface, the function of "three remotes" can be realized by using protocol for MODBUS; ... more(Only for DC60DR and DC62DR). - The function and status display of input and output ports are clear at a glance;.
Buy It Now
Free Shipping Condition: New Location: China Speed Drift with Temperature ±1% Max. Power Consumption 50 ma continuous plus actuator current. Relative Humidity Up to 95%. Idle Adjust CW 60% of set ... morespeed. Idle Adjust CCW Less than 1200 Hz. Speed Trim Range ±200 Hz.
Buy It Now
Free Shipping Condition: New Location: China Genset working plan can be set as per week or month. 5 switch value input, and each can be set as max 30 functions. Acrylic material is adapted to protect ... morethe screen. Indicator and number display through UI surface.
Buy It Now
$5.00 Shipping Condition: New Location: China DSE3110 manual/self start module, used for a single generator set. - Automatic startup and shutdown. The module can provide engine alarm and automatic ... moreshutdown protection. - The module includes 6 digital inputs and 4 digital outputs.
Buy It Now
Free Shipping Condition: New Location: Columbus, United States Model: Magnetic rotate speed sensor. MPN: 675 UNF-2A 5/8-18. Adhibition: The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing ... moreof the engine. The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth.
Buy It Now
$0.07 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Part No.:BC5110. Speed of Generator. cold machine,parking for ecletricity. Oil Pressure of Engine. Water Temperature of Engine. Load-phase AC current. ... moreBad weather or peak season will lead a delay. P/N ：DES5110.
Buy It Now
$30.00 Shipping Condition: New Location: China Temperature drift:
Buy It Now
$15.00 Shipping Condition: New Location: China Temperature drift:
Buy It Now
Free Shipping Condition: New Location: China Induction detection: AC170-480V single phase or three phase 50/60Hz. Compatible With Generac 0G6453 Stepper Motor Assembly For GTH990 HSB #4. Due to the ... morelight and screen difference, the item's color may be slightly different from the pictures.
Buy It Now
$8.99 Shipping Condition: New Location: China Various of crank conditions(RPM,Frequency, Oil Pressure) can be chosen. Generator current A. Generator Frequency Hz. Generator active power KW. 1 switch ... morevalue input, and each can be set as max 20 functions.
Buy It Now
$9.88 Shipping Condition: New Location: China START RELAY OUTPUT. FUEL RELAY OUTPUT. ALTERNATOR INPUT FREQUENCY. AUXILLIARY RELAY OUTPUTS. ARTERNATOR INPUT RANGE. Magnetic Input Range MAGNETIC iNPUT ... moreFREQUENCY. OVERALL 72 X 144 X 118.5 mm (Excluding switch).
Buy It Now
Free Shipping Condition: New Location: China In order to. prevent the AVR board from blowing up the tube and burning the board due to improper super-operation during the magnetization process. Thermal ... moreDrift: 0.05% per °C change in AVR ambient. For Murphy Magnetic Switch Tattletale (12 VDC) 518APH-12 #2.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ESD5500E Series Speed Governor. ●Widely used to all kinds of generator together with ADC120 12V ,high performance and perfectly realize electronic speed ... moregovernor. 1x MSP6729 Magnetic Speed Sensor. 1x ADC120 actuator.
Buy It Now
Free Shipping Condition: New Location: China (Item included:1xMagnetic Rotate Speed Sensor Pick Up Sender Ring Gear Teeth. 2) Perfect match for the original one. 2) Color may vary slightly due to ... morethe color setting of each individual monitor. Color: As picture shows.
Buy It Now
Free Shipping Condition: New Location: China In the power circuitry of the AVR.
Buy It Now
Free Shipping Condition: New Location: China The 225 Series electric actuator is a rotary output, linear torque, proportional servo. An internal spring provides fail safe operation by forcing the ... moreactuator to the fuel shut off position when the actuator is de-energized.
Buy It Now
$5.99 Shipping Condition: New Location: 中山市, China Three working states can be selected by the electric lock. The generator set can be started manually by touching the button on the panel, or the generator ... moreset can be automatically started by remote signal input, and the fault can be detected (Low oil pressure, high water temperature/cylinder temperature, external alarm, overspeed) automatically cut off the fuel relay and shut down the electromagnet to be electrified.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: 金东区, China It works for a variety of stand-alone applications. Generator frequency and CAN detection speed. Three-phase generator detection. Power-saving mode. Custom ... morehierarchical load output. The largest backlit graphic display of its kind.
Buy It Now
Free Shipping Condition: New Location: China C20D MKII is one module used for Diesel/gasoline Engine or Generator, It's an upgraded product of DC20D.It is with the functions of Auto Star/Stop, Protection ... moreand Alarm indication. DC Power and Running situation is indicated on the front panel.
Buy It Now
Free Shipping Condition: New Location: China Czech Republic. United States.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The no-load current is altered by varying the length of the linkage and the range is adjusted by changing the hole used by the rod end bearing on the ... moreactuator lever. Adjusting the actuator to operate through at least one-half of its stroke (12 degrees) will provide near optimum response.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts Description The 12V electronic actuator is made of metal, which is strong and durable. The ... more225 Series actuator is a rotary output, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers. Specification Model: ADC225-12 Color: Silver Material: Metal Shape: Rectangular Style: Modern Working Voltage: DC 12V Input Current: 0-5A Max. Torque: 3Nm Model: General Feature: Shockproof Working Stroke: 25° Recommended Wire Size of the Cable Harness: At Least #16 Gauge (1.5mm) Net Weight: 3.5kg/7.7lbs Gross Weight: 3.8kg/8.3lbs Package Size: 19*18*18cm/7.4*7*7inch Product Size: 13.2*10.8*12.1cm/5.2*4.3*4.8inch Package Included 1* 12V Electric Actuator Other Accessories.
|
|
|
 |