|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Model: ESD5111. For Generac 0G6453 Stepper Motor Assembly GTH990 US. Speed Drift with Temperature: ± 1% Maximun. MSP675 Magnetic Speed Sensor Pick Up ... moreSender Ring Gear Teeth 5/8-18 UNF-2A US. 4: Applicable to Cummins, Volvo Fukang, GAC generator sets.
Buy It Now
Free Shipping Condition: New Location: China Generator Controller GTR-17 1.Feature: The module GTR 17 is a low cost Generator controller equipped with Auto Start/Stop functions.Protections,alarm ... moreand annunciation etc,Monitoring and protections include:DC power,Running,Over Speed,High Water Temperature,Low Oil Pressure,Over Crank.Emergency stop and low battery. All output fucction executed by a set of traditional relays which make it possible to support heavy power handing capability.It designed to control engine by three buttons Start-Stop-ATS.The engine will be started while user push“start” button and holding at least 2 seconds.Push the“stop” button make the engine stop and reset the alarm if triggered.Push the“ATS”button can turn on the ATS light and enable Auto start function. Panel: 1.LED 1.Emergency/Auxiliary shut duown 2.Low Battery warming 3.Over speed shut down 4.Hight water termperaute shutdown 5.Low oil pressure shutdown 6.Over crank 7.Run 8.Power 2.Button 1.OFF: Stop engine/Reset alarm 2.ATS: Auto start funciton by selected ATS terminal 1.2 3.Manual: Manual start engine Dip switch setting funtion: 1.Pin1&Pin2: Value on stop engine delay Pin1 Pin2 Valve on stop Engine delay OFF OFF 5 sec ON OFF 10 sec OFF ON 15 sec ON ON 20 sec 2. pin3:System frequency On:50HZ Off:60HZ 3.Pin4:Escape motor by oil pressure switch On:Enable Off:Disable 4.Pin5:Pressure switch type On:Normal Open Off:Normal Close 5.Pin6:Pre heat output On:10 sec. Off:1 sec 6.pin7:Low DC Volt On:10.5 Sec Off:10.5 Sec 7.Pin8&pin9:Cooling time Pin 8 Pin 9 Cooling time OFF OFF 0 sec ON OFF 60 sec OFF ON 150 sec ON ON 300 sec 8.Pin 10:spare Protections and parameters Auxiliary shut down protection:1 sec.N.C Low battery warming:5 sec.10.5/20.5 VDC Over speed protection:2 sec.55/66 HZ High water temp. protection:2 sec.N.C/N.O Over crank:3 attempts Cranking speed up limited:0.5 sec.20HZ Protection hold-off timer: 5sec. 2.Feature: DC supply: DC 8-36V Power consumption: Max:5 W Measuring Frequency: 0-80HZ(min AC.Volt:35V.max AC Volt:300V) Relay Output: Start output:5A Valve output:5A
Buy It Now
Condition: Used Location: Stratford, United States Mil dual generator synch box and 2 power cables. Not sure if it allows for parallel operation or just switch between the two. Dont have a manual for this ... moreone. One shorter 100a cable for the gen the box mounts on and a longer one to connect to the second generator.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber gasket is added between con.
Buy It Now
$16.90 Shipping Condition: New Location: China Part Number:DSE501K,DSE 501K. Alternator Input Range:15 - 305 V AC RMS. Alternator Input Frequency:50 - 60 Hz at rated engine speed. switch on the front ... morepanel. The module is used to start and stop engine, indicating fault conditions, automatically s.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Item Type: Generator Interlock. DURABLE MATERIAL: The interlock kit is made of corrosion resistant aluminum alloy and has been anodized on ... morethe for better thermal and electrical insulation, so you can use electricity safely.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts. The no-load current is altered by varying the length of the linkage and the range is adjusted ... moreby changing the hole used by the rod end bearing on the actuator lever.
Buy It Now
Free Shipping Condition: New Location: China Model: ASM168. Feature: 1. STABLE PERFORMANCE: Adopt advanced single chip design, with stable performance, modular structure for easy wiring, embedded ... moreinstallation to save space. 2 OUTPUT PORTS: Provide fuel valve and power stop output port, 5A relay output, built in freewheeling diode, suitable for different types of diesel engines.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 1 X AVR R230. In order to. prevent the AVR board from blowing up the tube and burning the board due to improper super-operation during the magnetization ... moreprocess. 2: High temperature resistance, anti-aging, anti-corrosion and anti-mildew, safer.
Buy It Now
Free Shipping Condition: New – Open box Location: Las Vegas, United States 50 AMP generator cord. STW, 100% copper and 6AWG/3C+8AWG/1C. This vevor heavy-duty 50 Amp 125/250 Volt power cord is compatible with generators utilizing ... morea N14-50P outlet and enables an easier reach from your generator to your nearest power receptacle or electrical connection.
Buy It Now
Free Shipping Condition: New Location: Walton, United States Product Feature: * Application: Works for Honda EU1000i, EU2000i, EU2200i, EU2200ic, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt, EU20i EU10i. ... more* Upgrade Extended Gas Cap: The upgrade honda extended gas cap equipped with a brass hose fitting, which made of high quality brass material, it has good performance on corrosion and vibration resistance, ductility at high temperatures, and low magnetic permeability. Combined with the superior aluminum gas cap, they are the nice accessory for your generator..
Buy It Now
Free Shipping Condition: New Location: United States ·In the manual/automatic mode, the running genset can be stopped. ·In manual mode or manual test mode, press this key to start the stationary genset. ... moreIn this mode, when the generation is normal, the generator set will automatically load operation.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts Description The 12V electronic actuator is made of metal, which is strong and durable. The ... more225 Series actuator is a rotary output, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers. Specification Model: ADC225-12 Color: Silver Material: Metal Shape: Rectangular Style: Modern Working Voltage: DC 12V Input Current: 0-5A Max. Torque: 3Nm Model: General Feature: Shockproof Working Stroke: 25° Recommended Wire Size of the Cable Harness: At Least #16 Gauge (1.5mm) Net Weight: 3.5kg/7.7lbs Gross Weight: 3.8kg/8.3lbs Package Size: 19*18*18cm/7.4*7*7inch Product Size: 13.2*10.8*12.1cm/5.2*4.3*4.8inch Package Included 1* 12V Electric Actuator Other Accessories.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. The spacing between the main generator breaker and the nearest generator breaker is 1 1/4 to 1 7/16in. Item Type: Generator Interlock. DURABLE ... moreALUMINUM ALLOY: The interlock kit is made of corrosion resistant aluminum alloy and has been anodized on the for better thermal and electrical insulation, so you can use electricity safely.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: MAX 3W. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber.
Buy It Now
Free Shipping Condition: New Location: Bolingbrook, United States Generac CTF-10 LED Light Tower. Individual floodlight On/Off switches. 120V 15-Amp (NEMA 5-15R) & 120V 20-Amp (NEMA L5-20P) Power Inlets. Stationary Design. ... morePower from 120V utility power source or generator.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Self-definable self-starting mains failure self-starting mode; Support J1939-75 and CAN alarm;. With multiple flexible input, output and protection ... morefunctions, it supports, gas and gasoline EFI and non‑EFI (generator frequency detection).
Buy It Now
Free Shipping Condition: New Location: China DSE702AS is Auto Start versions. Tamper proof engine hours counter. Hours counter provides accurate information for monitoring maintenance and warranty ... moreperiods. Automatic Mode (Auto Start versions).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber gasket is added between con.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber gasket is added between con.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts Description The 12V electronic actuator is made of metal, which is strong and durable. The ... more225 Series actuator is a rotary output, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers. Specification Model: ADC225-12 Color: Silver Material: Metal Shape: Rectangular Style: Modern Working Voltage: DC 12V Input Current: 0-5A Max. Torque: 3Nm Model: General Feature: Shockproof Working Stroke: 25° Recommended Wire Size of the Cable Harness: At Least #16 Gauge (1.5mm) Net Weight: 3.5kg/7.7lbs Gross Weight: 3.8kg/8.3lbs Package Size: 19*18*18cm/7.4*7*7inch Product Size: 13.2*10.8*12.1cm/5.2*4.3*4.8inch Package Included 1* 12V Electric Actuator Other Accessories.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 5 Units Led Tube Display. With Rs485 Communication Port. Ac Input: Ac 50～380 V. Application for Various Kinds of Engine by Self-setting. Power Consumption: ... moreDc 8～36 V. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Auto Start and Stop. LED Indicates Fault Information. High Cooling Water Temperature Protection. Protective Function If you do not receive ... moreour reply within 48 hours, pls. If you are satisfied with our service, pls.
Buy It Now
Free Shipping Condition: New Location: China Introduction: The module monitors engine speed. Frequency, voltage and engine run hours and also displays the warning and shutdown status. The module ... moreincludes fixed and flexible outputs as well as configurable inputs making this product ideal for a wide variety of applications. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software. The module is available in MPU/ALT variants. For use with non-electronic engines only(magnetic pick-up/alternator sensing) Optional frequency(Hz) sensing from main AC alternator for genset applications. Optional Magnetic Pickup speed sensing. Specification: DC Supply ContinuousVoltage Rating 8 to 35 V Continuous. Cranking Dropouts Able to survive 0 V for 50mS. Providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achineved without the need for internal batteries. Charge Fail/ Excitation 8 to 35 V fixed power source 2.5W Nominal Standby Current 23 mA at 12 V. 18 mA at 24 V MAXIMUM OPERATING CURRENT 35 mA at 12 V. 30 mA at 24 V Outputs OUTPUT A(FUEL) 2 A DC at supply voltage OUTPUT B(START) 2 A DC at supply voltage AUXILIARY OUTPUTS C& D 2 A DC at supply voltage GENERATOR VOLTAGE RANGE 15 V- 333 V AC(L-N) FREQUENCY RANGE 3.5 Hz to 75 Hz MAGNETIC PICK-UP VOLTAGE RANGE ± 0.5v to 70v FREQUENCY RANGE 10.000 Hz(max) DIMENSIONS OVERALL 9.8 cm x 7.9 cm x 4.0 cm PANEL CUT-OUT 8 cm x 6.8 cm MAXIMUM PANEL THICKNESS 8 cm Feature• Back-lit icon LCD display• Front panel editing• LED and LCD alarm indication• Power Save mode• CAN and Magnetic Pick-up/Alt. versions available(specify on ordering) PC configurable• 6 Digital inputs• 4 Outputs(2 configurable on Magnetic Pick up/Alt. 4 configurable on CAN version) Alternative configuration• Configurable timers and alarms• Remote Start input• Generator voltage display• Generator frequency display• Battery voltage display• Engine speed display• Hours counter• Engine pre-heat• Comprehensive shutdown or warning on fault condition BENEFIT
Buy It Now
Free Shipping Condition: New Location: China Note: During installation and debugging, make sure that the stop lever of the engine does not move to the limit position before the extinguisher is stuck, ... moreotherwise the internal overload protection circuit of the extinguisher will act and the extinguisher will automatically stop working.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Welcome to my store AVR M16FA655A Automatic Voltage Regulator Normal 0 7.8 磅 0 2 false false false MicrosoftInternetExplorer4 The voltage regulator type“MARK ... moreV” Is suitable for Synchronous Generators of MARELLI MOTORI make. MJB series, size range 160-225 frames. The regulator is fully insulated in order to maintain high reliability also with severe ambient conditions(high level of humidity, dust, salt atmosphere) and in case of high vibrations level. The regulator is proper both for single and 3-phase generators. TECHNICAL DATA: REGULATION ACCURACY: +/ 0.5% rated steady state conditions VOLTAGE DRIFT:+/ 0.5% Voltage change, for 50°C T amb change RESPONSE TIME: 1 cycle OPERATING TEMPERATURE: 30 °C ÷ +70 °C EXCITER FIELD RESISTANCE: 8 Ω(min) ÷ 20 Ω(max) INPUT/OUTPUT DATA: SUPPLY VOLTAGE:170-270 V-POWER SUPPLY:350 VA(max) POWER DISSIPATED: 15 W(max) VOLTAGE SENSING: 170- 270 V-OUTPUT VOLTAGE(DC)30 V-OUTPUT CURRENT(DC) 5 A(max. Continuos) OUTPUT CURRENT(DC) 8 A(max forcing one minute) Payment We accept payment through PAYPAL only. Shipping 1. Items will be shipped within 3days upon the receipt of payment. 2. Please verify your address when checkout from PAYPAL. We will ship item to your PAYPAL address. If other address. Please advise us by eBay or E-mail. 3. The estimated delivery time is 10~20 workings days to Asian. USA, AU, UK, most western European countries; 15~30 workings days to most other countries. Delivery maybe delayed due to public holiday. If it's needed urgently. We can send via DHL with competitive agent freight cost. Please kindly contact us before payment. 4. Buyer will be responsible for the custom duty and local import taxes if incurred. Our Commitment 1. We provide 12 months warranty. 2. In case of the item malfunctioned under proper usage per instruction manual during warranty period. Please kindly contact us and return it at your shipping cost for a replacement. We will resend you a replacement at our shipping cost. 3. If you have NOT received item in 40 days. We wi
Buy It Now
Free Shipping Condition: New Location: China Designed with a forced breaking input port, when the input port is valid, the switch is forced to the breaking position (only valid for ATS switches with ... morebreaking position);. As default, phase reverse sequence protection and over/under frequency protection are disable; however, users can set the protection function as need.
Buy It Now
Free Shipping Condition: New Location: United States The power indicator and the standby close indicator light are on. During manual operation, the manual automatic button should be placed in the manual ... moreoperation position. Feature: 1. When the maximum temperature reaches 40 ℃, the relative humidity of the installation site should not exceed 50%; When the temperature is the lowest temperature ‑ 5 ℃, the relative humidity is higher, for example, when the temperature is 25 ℃, the relative humidity is 90%.
Buy It Now
Free Shipping Condition: New Location: China Model: DSE6020 MKII AMF. Feature: 1. Charging Alternator: 30V, 2.5Wmaximum. Communication Port: 5Vmaximum. AC Current Input: 5A. Analog Input: 10Vmaximum. ... more1 x User Manual.
Buy It Now
Free Shipping Condition: New Location: Alexandria, United States Generac 6485 Scheduled Maintenance Kit for 20kW and 22kW Standby Generators with 999cc Engine Black -. Scheduled maintenance is a necessity for all standby ... moregenerators. The Generac 6485 Maintenance Kit contains a pre-cleaner, air filter, oil filter, oil funnel, (2) spark plugs, blue cloth, instruction manual and preventative maintenance reminder sticker.
Buy It Now
Free Shipping Condition: New Location: Canada This auction includes a 4 page Factory SPECIFICATIONS BROCHURE for ONAN Performer P216V 16 HP Gasoline Air Cooled ENGINE. I sell only original manuals ... moreand brochures mostly used and dirty on the cover(unless stated above different) but NEVER copies or aftermarket remakes. ENJOY! ARE YOU IN NEED OF BROCHURES. TRACTORS, MACHINERY or CONSTRUCTION EQUIPMENT OPERATOR’S, PARTS or SERVICE TECHNICAL MANUAL? WE HAVE THOUSANDS IN STOCK. SEE THE PICTURES OF A FEW. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New – Open box Location: Bowling Green, United States 50 AMP generator cord. 12000-Watt and 50 ft. and practical plastic strap. This heavy-duty 50 Amp 125/250 Volt power cord is compatible with generators ... moreutilizing a 14-50R outlet and enables an easier reach from your generator to your nearest power receptacle or electrical connection.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber gasket is added between con.
Buy It Now
Free Shipping Condition: New Location: Fort Worth, United States Scheduled maintenance is a necessity for all standby generators. The Generac 6485 Maintenance Kit contains a pre-cleaner, air filter, oil filter, oil ... morefunnel, (2) spark plugs, blue cloth, instruction manual and preventative maintenance reminder sticker.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts Description The 12V electronic actuator is made of metal, which is strong and durable. The ... more225 Series actuator is a rotary output, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers. Specification Model: ADC225-12 Color: Silver Material: Metal Shape: Rectangular Style: Modern Working Voltage: DC 12V Input Current: 0-5A Max. Torque: 3Nm Model: General Feature: Shockproof Working Stroke: 25° Recommended Wire Size of the Cable Harness: At Least #16 Gauge (1.5mm) Net Weight: 3.5kg/7.7lbs Gross Weight: 3.8kg/8.3lbs Package Size: 19*18*18cm/7.4*7*7inch Product Size: 13.2*10.8*12.1cm/5.2*4.3*4.8inch Package Included 1* 12V Electric Actuator Other Accessories.
Buy It Now
Free Shipping Condition: New Location: Norcross, United States 【25FT Power Cord 】-The 25FT length generator cord is suitable for long-distance operation. Possessing the capacity of STW, this 50 amp generator cord ... morecan be used indoors and outdoors in all weather and seasons.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 2: The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine. MSP675 Magnetic Speed ... moreSensor Pick Up Sender Ring Gear Teeth 5/8-18 UNF-2A.
Buy It Now
Free Shipping Condition: New Location: China It can be started and stopped manually or via a remote start/stop signals. Generator Power kW Generator Current A. - Multiple crank disconnect conditions ... moreto select (engine speed sensor, oil pressure, generator frequency);.
Buy It Now
Free Shipping Condition: New Location: United States Hours counter provides accurate information for monitoring maintenance and warranty periods. The DSE701 module includes a remote start input. This input ... moreallows the module to be started from a pre-defined remote location.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Model: ESD5500E. For Generac 0G6453 Stepper Motor Assembly GTH990. Speed Drift with Temperature: ± 1% Maximun. MSP675 Magnetic Speed Sensor Pick Up Sender ... moreRing Gear Teeth 5/8-18 UNF-2A. 4: Applicable to Cummins, Volvo Fukang, GAC generator sets.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Part Number: DSE5110. Automatically loads transfer. For Murphy Magnetic Switch Tattletale (12 VDC) 518APH-12. LCD alarm indication. Alternator Input Range: ... more15V (L-N) to 333V AC (L-N) absolute maximum.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Scheduled maintenance is a necessity for all standby generators. The Generac 6485 Maintenance Kit contains a pre-cleaner, air filter, oil filter, oil ... morefunnel, (2) spark plugs, blue cloth, instruction manual and preventative maintenance reminder sticker.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 1 X AVR R230. In order to. prevent the AVR board from blowing up the tube and burning the board due to improper super-operation during the magnetization ... moreprocess. For Murphy Magnetic Switch Tattletale (12 VDC) 518APH-12.
Buy It Now
Free Shipping Condition: New Location: United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts Description The 12V electronic actuator is made of metal, which is strong and durable. The ... more225 Series actuator is a rotary output, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers. Specification Model: ADC225-12 Color: Silver Material: Metal Shape: Rectangular Style: Modern Working Voltage: DC 12V Input Current: 0-5A Max. Torque: 3Nm Model: General Feature: Shockproof Working Stroke: 25° Recommended Wire Size of the Cable Harness: At Least #16 Gauge (1.5mm) Net Weight: 3.5kg/7.7lbs Gross Weight: 3.8kg/8.3lbs Package Size: 19*18*18cm/7.4*7*7inch Product Size: 13.2*10.8*12.1cm/5.2*4.3*4.8inch Package Included 1* 12V Electric Actuator Other Accessories.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States For Murphy Magnetic Switch Tattletale (12 VDC) 518APH-12. Compatible with the AREP or PMG exitation system. Rated overload current: 8A-10s. Current sensing(parallel ... moreoperation): C.T. 2.5VA cl1,sencondary 1A(optional).
Buy It Now
Free Shipping Condition: New Location: China Thermal Drift: 0.05% per °C change in AVR ambient. In order to. prevent the AVR board from blowing up the tube and burning the board due to improper super-operation ... moreduring the magnetization process. 10Pcs CAT40 45° 0.589" Degree Pull Stud Retention Knob Fits HAAS CAT CNC Black.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Dryer Liquid Propane LP Propane Gas Conversion Kit Dryer Accessories 49572A UE. WLtoys XK A280 RC P51 Fighter 4CH Airplane 3D/6G Fixed Wing Brushless ... moreMotor Toy. Cell Pad Accessories. 4V310-10 5 Way 2 Position PT3/8" DC 24V Pneumatic Electric Solenoid Air Valve WE.
Buy It Now
$15.55 Shipping Condition: New Location: Brighton, United States 6003 Kit Includes Designed for the 7 kW (432 cc) CorePower standby generator. Keep your generator running at optimum performance. One (1) Air Filter. ... moreAir filter - 0H6104. One (1) Oil Filter.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Model: ESD5111. Magnetic Pickup MPU Generator Speed Sensor RPM MSP675 For Generator Set. For Champion 2800 3500 3100 3400 Watt Inverter Generator Magnetic ... moreOil YU. Compatible With Generac 0G6453 Stepper Motor Assembly For GTH990 HSB.
Buy It Now
Free Shipping Condition: New Location: China 2: The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine. Generator C.T. : 5A secondary ... more0.5VA. 3: The module also displays the engine speed.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 5 Units LED tube Display. Application for various kinds of Engine by self-setting. Start Output: MAX 5A. Fuel Output: MAX 5A. Operation Temperature :-30℃～70℃. ... morePower Consumption: MAX 3W. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber gasket is added between con.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm. Protection Level:IP54 when waterproof rubber gasket is added between con.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control.
Buy It Now
Free Shipping Condition: New Location: United States BE Pressure BE-9000ER 9000 Watt 420cc Generator. Lifan Pro Series Model 8500IE Generator. Smarter Tools GP9500EB GP9750EB STGP9500EB STGP9750EB Generator. ... moreDuroMax DuroStar PowerMax 420CC 16HP Generator DJ190FD-14100.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Micro-computer Control Man/Auto Start/Stop 5 Units LED tube Display LED and Fault Alarm Code Indication Two Group of programmed Relay output ... moreApplication for various kinds of Engine by self-setting With RS485 communication port Control： Manual Start/Stop Auto Start/Stop Preheat Control Auto idle control Choke control E.S.T control Specification： DC Supply: DC 8～36 V. Power Consumption: DC 8～36 V. Measuring Frequency:10～70 Hz. AC input: AC 50～380 V. Current measurement range:0-2000A. Speed sensor Frequency:30-9999Hz Relay output: Fuel Output: MAX 5A. Start Output: MAX 5A. Configurable output1:MAX 2.5A. Configurable output2:MAX 2.5A. Excitation output: MAX 1A. Size:78mm * 78mm * 55mm. Panel cut-out:67mm * 67mm.
Buy It Now
Free Shipping Condition: New Location: United States All Power APGG6000 13HP 6000 Watt Generator. All Power APGG7500 389cc 7500 Watt Generator. DeWalt DG4400B 4400 Watt 9 HP Generator. DeWALT DG6000 6000 ... moreWatt 11hp generator. Honeywell 5500 6875 Watt 337cc 11HP Generator HW5500 HW5500E HW5500EL.
Buy It Now
Free Shipping Condition: New Location: China Power on : Switch “0”to “I” till the tube is lighted, In the procession of cranking, over speed indicator will be lighted if the crank is not successful ... moreafter 45sec. Alarm output：MAX 16. Start running: Switch “I ” to “II” till engine started.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 12V Electronic Actuator ADC225-12V For Diesel Generator Parts Description The 12V electronic actuator is made of metal, which is strong and durable. The ... more225 Series actuator is a rotary output, linear torque proportional electric servo designed for mechanical actuation of fuel system control levers. Specification Model: ADC225-12 Color: Silver Material: Metal Shape: Rectangular Style: Modern Working Voltage: DC 12V Input Current: 0-5A Max. Torque: 3Nm Model: General Feature: Shockproof Working Stroke: 25° Recommended Wire Size of the Cable Harness: At Least #16 Gauge (1.5mm) Net Weight: 3.5kg/7.7lbs Gross Weight: 3.8kg/8.3lbs Package Size: 19*18*18cm/7.4*7*7inch Product Size: 13.2*10.8*12.1cm/5.2*4.3*4.8inch Package Included 1* 12V Electric Actuator Other Accessories.
|
|
|
 |