|
LOGAN 10" LATHE 30 TOOTH FORWARD/REVERSE IDLER GEAR LA-216
This is a used idler gear with a new bushing for Logan 10" lathes. It is 16 dp. Has a 2.00" od, is.563 wide with a bushed bore of.625.
|
|
|
LOGAN 10&11" LATHE EARLY RACK GEAR W/LATCH LA-56
Early Logan 10" and 11" lathe rack gear with good latch.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 32 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 32 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 2 1/8" diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 24 TOOTH THREADING CHANGE STUD GEAR
Excellent Condition- Original Logan 24 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 1 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 40 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 40 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 2 5/8" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Logan Lathe 24 Tooth Threading Change Gear (LA-202) Wards 9" 10" 11"
24 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock(they are still in the wrapper) However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 64 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 64 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 4 1/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOGAN 10 &11" LATHE PINION GEAR LA-550-1
Logan 10 and 11 inch lathe pinion gear. Good gear and hand wheel threads.
|
|
|
LOGAN 9 10 11" LATHE 72 TOOTH CHANGE/THREADING GEAR LA-214
Nice used 72 tooth Logan change gear used on all 9. 10 and 11" Logan lathes. 4.625 od, 438 wide with a.625 bore and a 5/32" key-way.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 56 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 56 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOGAN 10&11" LATHE W/QUICK CHANGE GEAR BOXES HALF NUT ASSEMBLY
Nice Logan 10 and 11" lathe half nut assemblys showing very little wear. These will NOT fit plain apron machines. Only ones with quick change gear boxes. I've had a lot of these come through my shop and have thrown most of them away but, these are keepers. I'm listing two of these and there are no discernable differences between them. I'm tempted to pull the apron off my lathe and see if these are better than mine.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 52 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 52 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 3/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOGAN 10" LATHE REVERSE GEAR LA-217
Nice Logan 10" lathe reverse gear. LA-217. 30 teeth, 16 dp, 2.00 diameter, 563 wide with a.625 keyed hole.
|
|
|
Logan Lathe 32 Tooth Threading Change Gear (LA-203) Wards 9" 10" 11"
32 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 60 Tooth Stud Gear for 12" and 14" (LP-1068, 2248, 18A-32248) 2500
60 tooth stud gear for 12" and 14" 2500 series Logan lathes. I bought out the inventory of a lathe repair shop. These gears appear to be new old stock but may be stained and/or dirty and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 48 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 48 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 1/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 44 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 44 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 2 7/8" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 46 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 46 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 3" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Logan Lathe 60 Tooth Threading Change Gear (LA-212) Wards 9" 10" 11"
60 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock(they are still in the wrapper) However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
LOGAN 12" LATHE HANDWHEEL PINION SHAFT AND GEAR LA-549 & LA-550
Logan 12 inch lathe hand wheel shaft and pinion gear. Good 20 tooth 16 dp gear and hand wheel threads. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e3f591622-0x101-
|
|
|
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 60 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 60 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 7/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e3f5916a0-0xf2-
|
|
|
Logan Model 200 Lathe 24 Tooth Teeth Shifter Gear LA-129
7/16" Wide. 1.615" Diameter 1/2" Bore. 1/8" Key 16 DP New $60.50 Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
LATER LOGAN 10&11" LATHE QUICK CHANGE GEAR BOX 16 TOOTH IDLER GEAR LA-1223
Logan 10" and 11" lathe quick change gear box 16 tooth idler gear w/bushing for lathes after serial number 46561. 9 od. 382 wide with a.438 bushed bore.
|
|
|
LOGAN 11" LATHE 48T GEAR - EXCELLENT CONDITION!
The following parts came from a LOGAN lathe with a 11" swing and 3' bed. The serial# was 60805(not sure of model number) This lathe was in the middle of restoration and was NOT parted out due to wear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the 48T gear that bolts to the QC gearbox thru the banjo gear bracket(ID is 5/8" It's in excellent shape and looks barely used. If'New' = 10. Then this is a solid 8.5 to 9. If you're restoring a Logan you will not find one much nicer! Don't miss it, it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve ... moremy fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive
|
|
|
VERY NICE ORIGINAL LOGAN 10 MODEL 820 LATHE QUICK CHANGE BOX SCREW 24 TOOTH GEAR
Very Nice- Original 24 tooth lead screw gear for a 10" Logan Model 820 lathe with quick change gear box. Single keyway. 5/8" bore, teeth are 5/16" thick. Gear is 5/8" total thickness, 1 5/8" diameter. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOGAN 10&11" LATHE RIGHT HAND QUICK CHANGE GEAR BOX SHIFT HANDLE LA-1204
Logan 10" and 11" lathe right hand shift handle for lathes after serial number 46561.
|
|
|
Logan Lathe 52 Tooth Threading Change Gear (LA-209) Wards 9" 10" 11"
52 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 44 Tooth Threading Change Gear (LA-206) Wards 9" 10" 11"
44 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 20 Tooth Gear Box Gear for 12" & 14" (LP-1025, 2227, 18A-32227)
20-Tooth Logan lathe gear box gear for 12" and 14" lathes. From S/N 67012. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 16 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1005 LA-1225
16-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear to be new. However. The may be stained and/or have a few dings and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 18 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1006 LA-1226
18-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears used but are in good functional condition. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
LOGAN 11" LATHE SPINDLE GEAR LA-1018
Nice Logan 11" lathe spindle gear. 46 teeth. 20 dp, 2.400 od and 1.175 bore.
|
|
|
Logan Lathe Change Threading Gear 34T 16DP, 5/8" keyed Bore, 1/2" Face
SOTTOF SALES International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Gear in very good condition. May fit other lathes that uses this same pitch, face, and bore dimensions. D3197.1 PLEASE READ& UNDERSTAND ALL TERMS& CONDITIONS BELOW PRIOR TO BIDDING EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. All items are being sold on an"As Is, Where Is" basis. No warranties implied or stated, unless specifically addressed in the listing. All sales are final. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements ... morehave been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please don't pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
Logan Lathe 24 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1010 LA-1230
24-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear used but in good condition. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 26 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1011 LA-1231
26-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear to be new old stock. However. They may have some staining and dings and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 46 Tooth Threading Change Gear (LA-207) Wards 9" 10" 11"
46 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 40 Tooth Threading Change Gear (LA-205) Wards 9" 10" 11"
40 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 56 Tooth Threading Change Gear (LA-211) Wards 9" 10" 11"
56 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Logan Lathe 22 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1008 LA-1228
22-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear new. However. Some are stained and/or have a few dings. Thus, they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ff617a79e-0x105-
|
|
|
Logan Lathe 23 Tooth Quick Change Gear Box Gear 9" 10" 11" 12" LP-1009 LA-1229
23-Tooth Logan lathe quick change gear box gear for 9" 10" 11" and some 12" lathes. From S/N 46561. I bought out the inventory of a lathe repair shop. These gears appear new. However. Some are stained and/or have a few dings. Thus, they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Boston GA 90 cast iron lathe change gear for Atlas Southbend Logan etc.
This is a Boston GA 90 cast iron lathe gear. This was a used gear in excellent condition. Which has been cleaned and re-painted to bring it back to a like new condition. I am unaware of the exact history of this part, but it seems to have practically no wear on it as you can see from the photos. If you have any questions please don't hesitate to ask. Thanks for looking!
|
|
|
Logan Lathe 60 Tooth Threading Safety Gear
60-tooth gear train safety gear for a logan lathe. Looks to be new old stock and appears to be in great condition. Comes as pictured. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Boston GA-46 lathe change gear Atlas Southbend Logan etc.
This is a Boston GA-46 lathe change gear. Shows some signs of wear. But still has a good amount of useful life left in it. It has been bead blasted clean, lightly oiled and is ready to use. Width is 3/8" Bore is 5/8" diametral pitch is 20, and this gear has 46 teeth on it. If you have any further questions please feel free to ask. Thanks for looking!
|
|
|
Logan Lathe Change Threading Gear 24T , 5/8" keyed Bore, 7/16" Face
Logan Lathe Change Threading Gear 24T. 5/8" keyed Bore, 7/16" Face This item has surface rust and normal wear and tear. All teeth are in good condition with no chips. Please ask questions.
|
|
|
Logan Lathe Change Threading Gear 72T , 5/8" keyed Bore, 7/16" Face
Logan Lathe Change Threading Gear 72T. 5/8" keyed Bore, 7/16" Face This item has surface rust and normal wear and tear. One side of teeth are slightly shark toothed. Otherwise, all teeth are in good condition with no chips. Please ask questions.
|
|
|
Logan Lathe bull gear for 10" - 11' lathe
For Sale, Logan Lathe bull gear that will fit a 10" or 11' lathe with a 2 1/4" x 8 thread per inch spindle. This is a new gear and the lock pin hole will need to be put in to match the lathes main pulley. I have drawing of the gear that I can Email to you if you request it. Paypal only. No reserve.
|
|
|
EXCELLENT ORIGINAL LOGAN 10 MODEL 820 LATHE QUICK CHANGE BOX SCREW 24 TOOTH GEAR
Excellent- Original 24 tooth lead screw gear for a 10" Logan Model 820 lathe with quick change gear box. Single keyway. 1/2" bore, teeth are 5/16" thick. Gear is 5/8" total thickness, 1 1/4" diameter. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
56T Gear for a Logan Lathe
Item is a used 56 T gear for a Logan Lathe Please contact with any questions. Please take a look at the other size gears I have for the same Logan Lathe
|
|
|
52T Gear for a Logan Lathe
Item is a used 52 T gear for a Logan Lathe Please contact with any questions. Please take a look at the other size gears I have for the same Logan Lathe
|
|
|
44T Gear for a Logan Lathe
Item is a used 44 T gear for a Logan Lathe Please contact with any questions. Please take a look at the other size gears I have for the same Logan Lathe
|
|
|
40T Gear for a Logan Lathe
Item is a used 40 T gear for a Logan Lathe Please contact with any questions. Please take a look at the other size gears I have for the same Logan Lathe
|
|
|
38T Gear for a Logan Lathe
Item is a used 38 T gear for a Logan Lathe Please contact with any questions. Please take a look at the other size gears I have for the same Logan Lathe
|
|
|
32T Gear for a Logan Lathe
Item is a used 32 T gear for a Logan Lathe Please contact with any questions. Please take a look at the other size gears I have for the same Logan Lathe
|
|
|
VERY NICE ORIGINAL LOGAN 9" 10" LATHE 24 TOOTH THREADING CHANGE STUD GEAR
Very Nice- Original Logan 24 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 1 5/8" outer diameter. Teeth are all in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14385b902ed-0xf7-
|
|
|
VERY NICE ORIGINAL LOGAN 9" 10" LATHE 18 TOOTH THREADING CHANGE STUD GEAR
Very Nice- Original Logan 18 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 1 1/4" Teeth are all in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE ORIGINAL LOGAN 9" 10" LATHE 72 TOOTH THREADING CHANGE GEAR
Very Nice- Original Logan 72 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 4 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOGAN 9 10 11 12" LATHES 32/16 QUICK CHANGE COMPOUND GEAR LA-1220A
Nice 32/16 tooth 20 dp compound gear for the later. Small, 9, 10, 11 and 2900 series 12 inch Logan lathe quick change gear boxes. This is the one that goes when you screw up(I should know: Good teeth on both the 16 and 32 tooth gears.
|
|
|
LOGAN 10 11 12" LATHE CHANGE GEAR/BANJO BRACKET LA-227
Logan change gear bracket that had been broken and professionally repaired. It's been in service for a number of years without any problems.
|
|
|
LOGAN 11" LATHE REVERSE GEAR BRACKET/LEVER
Good Logan 11" forward/reverse lever. There are 2. Maybe 3, different reverse levers used on Logan lathes. I don't trust the numbers given in the manuals for these levers so I don't give them in my listing. Please make sure this is the one you need before buying. It has a tapered plunger and measures approximately 3" from the center of the pivot hole to the plunger. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14595ecd858-0x105-
|
|
|
LOGAN 10" LATHE REVERSE GEAR BRACKET/LEVER LA-1026
Good Logan 10" lathe forward/reverse lever. I don't trust the numbers in the manuals for these levers as there were possibly 3 different ones used. Make sure this is the one you need before buying. It has a tapered plunger. Not a straight one, and measures approximately 2 5/16 inches from the center of the pivot hole to the center of the plunger. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-14595ecd836-0x106-
|
|
|
LOGAN 10 11 12" LATHE CHANGE GEAR STUD ASSEMBLY LA-313-A
Good Logan change gear stud.
|
|
|
LOGAN 11" LATHE 46 TOOTH REVERSE GEAR LA-1028
Good Logan 11" lathe 46 tooth reverse gear for the later 20 DP gear boxes. 20 DP. 2.4" OD, 563 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 9 10 11 & SOME 12" LATHES QUICK CHANGE SLIDER GEAR LA-1214
Good 22 tooth quick change handle slider gear for the later 20 DP gear boxes. 20 DP. 1.2" OD, 370 wide with a 5/8 keyed bore.
|
|
|
LOGAN 9 10 11 12" LATHES 72 TOOTH STUD/CHANGE/THREADING GEAR LA-214
Good 72 tooth stud/change/threading gear for most Logan lathes. No chipped or missing teeth. 16 DP. 4 1/8 OD, 7/16 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 9 10 11 12" LATHES 64 TOOTH STUD/CHANGE/THREADING GEAR LA-213
Good 64 tooth stud/change/threading gear for most Logan lathes. No chipped or missing teeth. 16 DP. 4 1/8 OD, 7/16 wide with a 5/8" bore and 5/32 keyway. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-1459637358c-0x105-
|
|
|
LOGAN 9 10 11 12" LATHES 60 TOOTH CHANGE/THREADING GEAR LA-212
Good tooth stud/change/threading gear for most Logan lathes. No chipped or missing teeth. 16 DP. 3 7/8 OD, 7/16 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 9 10 11 12" LATHES 48 TOOTH STUD/CHANGE/THREADING GEAR LA-208
Good 48 tooth stud/change/threading gear for most Logan lathes. No chipped or missing teeth. 16 DP. 3 1/8 OD, 7/16 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 9 10 11 12" LATHES 36 TOOTH STUD/CHANGE/THREADING GEAR LA-204
Good 36 tooth stud/change/threading gear for most Logan lathes. No chipped or missing teeth. 16 DP. 2 3/8 OD, 7/16 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 9 10 11 12" LATHES 24 TOOTH STUD/CHANGE/THREADING GEAR LA-202
Good 24 tooth stud/change/threading gear for most Logan lathes. No chipped or missing teeth. 16 DP. 1 5/8 OD, 7/16 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 11" LATHE 34 TOOTH FORWARD/REVERSE IDLER GEAR LA-1027 W/STUD
Good Logan forward/reverse idler gear and stud for 11" lathes. It is a 20 dp 34 tooth gear. With a 1.800" od, is.563 wide with a bushed bore of.625.
|
|
|
EARLY LOGAN 9 10 11 & SOME 12" LATHES QUICK CHANGE HANDLE GEAR LA-497
Good 40 tooth quick change handle gear for the early(to s/n 46561) 16 DP gear boxes. 16 DP. 2.625" OD, 495 wide with a 7/16" bushed bore.
|
|
|
LOGAN 10" LATHE 30 TOOTH REVERSE GEAR LA-217
Good Logan 10" lathe 30 tooth reverse gear. 16 DP. 2" OD, 9/16 wide with a 5/8" bore and 5/32 keyway.
|
|
|
LOGAN 10" LATHE PULLEY/CONE GEAR LA-688
Nice Logan 10" lathe cone or pulley gear. 30 tooth. 14 DP,1.375 wide with a 1.492 bushed bore.
|
|
|
LOGAN 11" LATHE PULLEY/CONE GEAR LA-1013
Nice Logan 11" lathe cone or pulley gear. No bushing as it was shot. 40 teeth. 16 DP, 2" bore(1 7/8 w/bushing) 1.813 wide.
|
|
|
LOGAN 11" LATHE 46 Tooth Reverse Change gear Free Shipping !!!
LOGAN 11" LATHE 46 Tooth Reverse Change gear Free Shipping! Item shows normal wear and tear. With all teeth in very good, but not perfect condition. I have to add that statement because some members think good is perfect, which it isn't) Item comes as shown. 5/8" hole. 9/16" wide. FREE SHIPPING!
|
|
|
LOGAN 11" LATHE REVERSE GEAR BRACKET/LEVER LA-1026 LA-142 LA-135 Free Shipping
LOGAN 11" LATHE REVERSE GEAR BRACKET/LEVER LA-1026 Item shows normal wear and tear. It has been repainted. Plunger. Plunger lever, and spring all work well. Includes oiler, which you cannot see. Item comes as shown. FREE SHIPPING! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-145e5f984ab-0x114-
|
|
|
LOGAN 11" LATHE IDLER GEAR PINION STUD
LOGAN 11" LATHE IDLER GEAR PINION STUD Item shows normal wear and tear. Fits 5/8" arbor. Total length is 5.7"
|
|
|
LOGAN 11" LATHE Reverse Gear Shaft LA-138
LOGAN 11" LATHE Reverse Gear Shaft LA-138 Item shows normal wear and tear. Includes only what is in the pics. Fits 5/8" arbor. Total length is 5.7"
|
|
|
Logan Lathe 26 Tooth Gear Box Gear 9" 10" 11" 12" (LP-1012, LA-1232, 18A-31232)
Logan Lathe 26 Tooth Gear Box Gear 9" 10" 11" 12" LP-1012. LA-1232, 18A-31232) Item shows normal wear and tear. A few very small chips and a little shark toothing. I tried to capture in the pics. But it is difficult to see.
|
|
|
Logan Lathe 16 Tooth Gear Box Gear for 9" 10" 11" Lathes
Logan Lathe 16 Tooth Gear Box Gear for 9" 10" 11" Lathes Item shows normal wear and tear. A few small chips. I tried to capture in the pics. But it is difficult to see.
|
|
|
Logan Lathe 23 Tooth Gear Box Gear 9" 10" 11" 12" (LP-1012, LA-1232, 18A-31232)
Logan Lathe 23 Tooth Gear Box Gear 9" 10" 11" 12" LP-1012. LA-1232, 18A-31232) Item shows normal wear and tear. A few small chips and a little shark toothing. I tried to capture in the pics. But it is difficult to see.
|
|
|
LOGAN 11" LATHE 36 Tooth Change gear Free Shipping !!!
LOGAN 11" LATHE 36 Tooth Change gear Free Shipping! Item shows normal wear and tear. With all teeth in good, but not perfect condition. I have to add that statement because some members think good is perfect, which it isn't. Item comes as shown. 5/8" hole. 7/16" wide. FREE SHIPPING!
|
|
|
Nice Vintage 72 Tooth Lathe Change Gear Logan South Bend
Vintage Lathe Change Gear 72 Tooth 6-1/8" in diameter. 1" keyed center, 1" wide All teeth are intact. I've seen similar gears listed for Logan and South Bend lathes. Buyer should ensure that this gear will fit their needs. I have several other sizes available. Questions and comments for clarification are welcomed. Buyer to pay $12.99 for insured priority shipping. Thanks for looking and good luck!
|
|
|
Logan Lathe Back Gear Assembly with Gears 123 and 124
Up for auction is a Logan lathe back gear assembly with gear numbers 123 and 124 in very good condition. comes with parts shown. I am always happy to combine shipping. Thank you.
|
|
|
Logan 10" Lathe End Change Gear Guard Hinge and Hinge Shaft
LOGAN 10" LATHE MODEL 200 SERIAL NUMBER 14048 Logan 10" Lathe End Change Gear Guard Hinge with Hinge Shaft Comes as shown. Good working condition GENTLY REMOVED. DO NOT BE SHY MAKE ME AN OFFER. IF YOU NEED IT WE WANT TO SELL IT TO YOU, WE WILL NOT BICKER OVER A FEW BUCKS. YOU WILL SAVE $$ WITH ME. YOU NEED IT. WHAT ARE YOU WAITING FOR? JOHN 4:8 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-146df658637-0x106-
|
|
|
Nice Vintage 60 Tooth Lathe Change Gear Logan South Bend
Vintage Lathe Change Gear 60 Tooth 5-1/4" in diameter. 1" keyed center, 1" wide All teeth are intact. I've seen similar gears listed for Logan and South Bend lathes. Buyer should ensure that this gear will fit their needs. I have several other sizes available. 24-90 teeth) Questions and comments for clarification are welcomed. Buyer to pay $12.99 for insured priority shipping. Thanks for looking and good luck!
|
|
|
Nice Vintage 36 Tooth Lathe Change Gear Logan South Bend
Vintage Lathe Change Gear 36 Tooth 3-1/8" in diameter. 1" keyed center, 1" wide All teeth are intact. I've seen similar gears listed for Logan and South Bend lathes. Buyer should ensure that this gear will fit their needs. I have several other sizes available. 24-90 teeth) Questions and comments for clarification are welcomed. Buyer to pay $6.99 for insured priority shipping. Thanks for looking and good luck!
|
|
|
LOGAN 10 11 12" LATHE CHANGE GEAR ASSEMBLY BUSHING LA-314
CHANGE GEAR ASSEMBLY BUSHING LA-314 Good used condition GENTLY REMOVED. DO NOT BE SHY MAKE ME AN OFFER. IF YOU NEED IT WE WANT TO SELL IT TO YOU, WE WILL NOT BICKER OVER A FEW BUCKS. YOU WILL SAVE $$ WITH ME. YOU NEED IT. WHAT ARE YOU WAITING FOR? JOHN 4:8
|
|
|
LOGAN 9 10 11 12" LATHES CROSS FEED IDLER GEAR LA-190
LOGAN 9 10 11 12" LATHES CROSS FEED IDLER GEAR Good used condition GENTLY REMOVED. DO NOT BE SHY MAKE ME AN OFFER. IF YOU NEED IT WE WANT TO SELL IT TO YOU, WE WILL NOT BICKER OVER A FEW BUCKS. YOU WILL SAVE $$ WITH ME. YOU NEED IT WHAT ARE YOU WAITING FOR? JOHN 4:8
|
|