|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$128.38 Shipping Condition: New – Open box Location: Garnett, United States You will receive exactly what is in the pictures. If it’s not in the pictures, it’s not included. Most boxes have been opened for inspection and photos.
Buy It Now
Free Shipping Condition: New – Open box Location: Garnett, United States Head Type: Hex. Thread Type: Coarse. You will receive exactly what is in the pictures. If it’s not in the pictures, it’s not included. Cap Screws are ... moreproportioned and toleranced to assure full and proper loading when assembled into a tapped hole.
Buy It Now
Free Shipping Condition: New Location: Columbia, United States This lot includes 20 heavy duty zinc eye bolts measuring 1/4 inch in diameter and 3 inches in length. The bolts are manufactured by Stanley Hardware and ... moreare perfect for industrial or commercial use. They are ideal for attaching cables, ropes, or chains to walls, ceilings, or other surfaces. The bolts come in a pack of 20 and are measured in inches.
Buy It Now
Free Shipping Condition: New – Open box Location: Athens, United States Location:LRG SOM. pictured are couple of samples of what can be included. I take photos of theexact item that you willget, unless I state otherwise.
Buy It Now
Free Shipping Condition: New – Open box Location: Louisville, United States LOT OF 25 PIECES.
Buy It Now
Free Shipping Condition: New Location: Zeeland, United States 316 stainless is more corrosion resistance than normal 304 stainless. THIS SELDOM HAPPENS, BUT WANT YOU TO BE AWARE. USA 50 STATES ONLY.
Buy It Now
Free Shipping Condition: New Location: Buckner, United States
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States Lot of (500) Torx drive flat head wood screws. These yellow zinc plated screws are #8 size and are 2" in length with a type 17 tip. These screws also ... morefeature countersinking nibs under the head for a clean installed finish.
Buy It Now
$6.09 Shipping Condition: New – Open box Location: Machesney Park, United States Made in USA. BEING SOLD AT A SUPER LOW PRICE OF. 25 ea.
Buy It Now
Free Shipping Condition: New Location: Gloversville, United States Store Categories. Click to close full size. For warranty information. Plow Bolt.Countersunk Square Neck,Grade 8,Alloy Steel,5/8-11,3"L,3 Domed Head. ... moreVALUE BRAND. Item Specifics. Item. Plow Bolt. Type. Countersunk Square Neck. Material. Alloy Steel. Finish. Plain. Head Angle(Deg. 80. Head Type. 3 Domed. Item. Plow Bolt. Length. 3" Material. Alloy Steel. Tensile Strength(PSI) 150.000. Thread Size. 5/8-11. Type. Countersunk Square Neck. Meets/Exceeds. SAE J 429. Head Dia. 1.044" Head Height. 0.516" Square Width. 0.640" Grade. 8. Package Quantity. 175. Shipping A $5 shipping and handling fee is charged on orders totaling less that $25 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $25 or more before tax. Not all products qualify for the above Shipping Policy. Additionally. Standard shipping rates will apply for all orders to Alaska and Hawaii. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer services hours are Monday through Friday from 7am to 7pm(central) Include a copy of the original order confirmation or packing slip with your RA paperwork as proof of purchase. Returns received at Zoro without a RA number may be assessed a 15% restocking(processing) fee that will be deducted from any credit due. About Us Zoro has a simple mission. We help small business stay competitive! We do this by offering great products at super prices. We unders
1d 4h 26m 22s 0 bids
$15.99 Now
$7.57 Shipping Condition: New – Open box Location: Martinez, United States Use these Eye Bolts for various applications, such as lifting, rigging, or anchoring. The bolts are manufactured in the United States and are of high-quality.
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States This coating is designed specifically for ACQ treated lumber and outdoor applications. Lot of (100) Torx drive flat head wood screws. These coated screws ... moreare #10 size and are 6" in length with a type 17 tip.
Buy It Now
$26.00 Shipping Condition: New – Open box Location: Elk Grove, United States Lot of 20 Lifting Eye Bolt Stainless Steel 304 18.
Buy It Now
$17.25 Shipping Condition: New – Open box Location: Mcallen, United States
Buy It Now
$10.00 Shipping Condition: Used Location: Miami, United States Screws are from an inventory surplus pile. Lot may contain a small amount of other screws, bolts or nuts that may have been mixed in with the lot.
Buy It Now
$4.95 Shipping Condition: New – Open box Location: Bakersfield, United States Panhead Combination Screw. #6-32 1/4" 5/16" x 5/16" panhead slotted lot of 50. Square Washer: 7/16" x 7/16". size length washer head lot of. morescrew ... morewith square washer. Thread: #10-32.
Buy It Now
Free Shipping Condition: New – Open box Location: Clermont, United States LIFTING EYEBOLT WITH SHOULDER. FORGED STEEL. 3/8-16 THREAD. 3/4" OR. 75" THREAD LENGTH. SOLD AS A LOT OF 4.
Buy It Now
Free Shipping Condition: New Location: Neeses, United States Lot Of (10) M8 Hex Bolt. Thread 1.0 Pitch. Zinc Plated. Grade 8.8.
Buy It Now
Free Shipping Condition: New – Open box Location: Louisville, United States LOT OF 10 PIECES.
Buy It Now
Free Shipping Condition: New Location: United States Hampton 3/16 in. Hampton 02-3456-252 Zinc-Plated Steel Eyebolt 5/16x5 L in. Hampton 02-3451-313 Zinc-Plated Steel U-Bolt 1-3/4 W x 4-3/16 L in. Paint ... moreAnd Paint Supplies. Thread Size: 3/8 in. Product Type: Square Bend U Bolt.
Buy It Now
Free Shipping Condition: New Location: Springfield, United States sss2607XG1G.18 This is a multiple identical item listing for Brand New 18-8 Non-Magnetic Stainless Steel. 6-32 x 1/4" Long, Phillips Pan Head Machine ... moreScrews, Part Number QANER0156466. Each bid quantity is for a Lot of One Hundred(100) Pieces. You may bid/ buy any number of lots, up to the total quantity available above. These were purchased at an industrial liquidation earlier this year. And they were brand new in the original factory boxes. We packaged them in heavy Ziplok bags for resale. According to the calipers Overall length: 329" 8.36mm Thread length(underside of head to tip) 237" 6.01mm Head diameter: 264" 6.71mm Threads: 6-32 x 1/4" diameter- threads per inch x length) Combined Shipping Important: EBay's shipping calculator works reasonably well for single quantity purchases. However, it often overcharges on multiple/combined purchases. This is especially true of large orders that will ship in Priority flat-rate boxes. If your shipping cost seems excessive, please email us prior to paying and we will be glad to send a corrected invoice. By default. We ship most non-fragile, lightweight items(under 13 oz) by First Class Mail to save you money. First Class is usually cheaper for single items, but please click the"see details" link for other shipping options if you are buying multiple quantities. The tiny link is located directly below the big blue"Add to Cart" button. These options will be available for selection as you go through eBay checkout. U.S. Shipments We ship packages daily through USPS. And we upload all tracking information to eBay. You should receive a tracking email sent to your eBay email address. If you would like to use your UPS. FedEx, or freight account, we will be glad to package your order free of charge. You are responsible for all labeling, call tags, and pickup arrangements with your carrier. We will have your order boxed or palletized when your carrier is scheduled to arrive. You may also pick up larger orders in person(by appointment
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States
Buy It Now
Free Shipping Condition: New Location: Gloversville, United States Larger quantities are available.
Buy It Now
Free Shipping Condition: New Location: Buckner, United States
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States Lot of (75) hex head tap bolts. These 307A grade zinc plated bolts are 1/4-20 thread and are 6" in length with a full length thread and 7/16" hex.
Buy It Now
Free Shipping Condition: New – Open box Location: Tellico Plains, United States BOLTS, SCREWS, NUTS, WASHERS, RIVETS, ROLL PINS, COTTER PINS, ETC. 10 LBS MIXED LOT OF ASSORTED FASTENERS.
Buy It Now
$4.47 Shipping Condition: New Location: Fresno, United States Solid brass not plated steel. These are 50+ years old. Made in Belgium. Box not included.
Buy It Now
$16.00 Shipping Condition: Used Location: Springdale, United States The price is for a lot of 47 count lag bolts used condition. ideal for deck building ect. They look like 5/8 by 5 inches.long to me..all have washers ... moreincluded. The impact socket that fits best is 9/16 but 14 metric fits also.they are for exterior use and are painted. Purchased at.lowesfor about 5 bucks per lag with washers and with tax.thanks
Buy It Now
Free Shipping Condition: New Location: Randolph, United States Let us help you with your fastener needs. Up for sale are lots (25, 50 or 100) of 1/2" hot dipped galvanized large sized carriage bolts with nuts and ... morewashers. We have other quantities and sizes.
Buy It Now
$15.99 Shipping Condition: New – Open box Location: Ballston Spa, United States Assortment of hardware.
Buy It Now
$19.15 Shipping Condition: New Location: Shelbyville, United States This lot includes 8 boxes of 305 stainless fascia screws, each box containing 100 screws, for a total of 800 screws. The screws are specially designed ... moreto work with Brazilian Ipe NewTechWood and use an included T20 bit.
Buy It Now
Free Shipping Condition: New Location: Pleasant Grove, United States 307A Grade A bolts. Bolts are 5/16"-18 coarse thread.
Buy It Now
Free Shipping Condition: New – Open box Location: Poway, United States This lot of titanium flat head slotted screws are made out of commercially pure Grade 2 Titanium. Some of the benefits to using titanium include that ... moreit is lightweight, high strength, and corrosion resistant.
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States Lot of (1000) Torx drive flat head wood screws. These yellow zinc plated screws are #8 size and are 1-1/4" in length with a type 17 tip. These screws ... morealso feature countersinking nibs under the head for a clean installed finish.
Buy It Now
Free Shipping Condition: New Location: Grayslake, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Baton Rouge, United States Hard drive is NOT included.
6d 12h 46m 51s 0 bids
$4.99 Now
$12.45 Shipping Condition: New – Open box Location: Reseda, United States For more details and condition see photos.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States Tapping Screws, Tek Screws, Cutting Screws + More! Lot can contain: Machine Screws, Drilling Screws. These lots are 100% random which makes them fun. ... moreThese are not second quality fasteners that were previously rejected or rescued from a scrap yard.
Buy It Now
Free Shipping Condition: New Location: Lees Summit, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Waukesha, United States SERRATED UNDER THE FLANGE HEAD OR. 5/16 X 3" CAP SCREW BOLT AND NUTS. 18 TPI COARSE THREAD. FULL LENGTH THREAD. 20 PC LOT OF. MY CODE 40 50.
Buy It Now
Free Shipping Condition: New – Open box Location: Louisville, United States
Buy It Now
Free Shipping Condition: New Location: Grand Rapids, United States Washer and Hex Thickness: 9.7 mm Maximum. Drive Type: Hex (10mm). Full Thread Length: 30.0 mm Minimum. Length Under Head: 84.3 to 85.7 mm.
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States These 307A grade zinc plated fasteners are 1/4-20 thread and are 4" in length with a full length thread. Lot of (100) carriage head bolts.
Buy It Now
$4.49 Shipping Condition: New Location: Apple Valley, United States (PART# AN102809). Thread Length Thread Qty. Head Height - LOT OF 5 -.
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States These 307A grade zinc plated fasteners are 1/4-20 thread and are 6" in length with a full length thread. Lot of (75) carriage head bolts.
Buy It Now
Free Shipping Condition: New Location: Bonaire, United States
Buy It Now
Free Shipping Condition: New Location: Bonaire, United States 3/8-16 x 3/4 Carriage Bolts Stainless Steel 18-8. - 10 Pieces Per Bag.
Buy It Now
Free Shipping Condition: New Location: Bonaire, United States 18-8 Stainless Steel.
Buy It Now
Free Shipping Condition: New Location: Sidman, United States [1] Security Tamper Proof Pin-in-Socket. Button Head Security Hex. Hex Power Driver Bit - 1/8" x 2" NC. #6 x 1-1/2" Black Screw. LOT OF 100. BLACK PHOSPHATE.
Buy It Now
Free Shipping Condition: New Location: Honesdale, United States Lot of (300) Torx drive flat head wood screws. These yellow zinc plated screws are #9 size and are 3" in length with a type 17 tip. These screws also ... morefeature countersinking nibs under the head for a clean installed finish.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States These lots are 100% random which makes them fun. Bolts, Nuts, Screws, Washers, Pins + More! 40 lbs is one of the boxes pictured. These are not second ... morequality fasteners that were previously rejected or rescued from a scrap yard.
Buy It Now
Free Shipping Condition: New Location: Hickory, United States This lot includes 100 hex head bolt cap screws, each measuring 1/2" in diameter and 1 1/2" in length. The screws are made of high-quality steel, with ... morea Grade 5 rating for durability. They feature a socket drive style and are coated in zinc for added protection against corrosion. Ideal for a variety of applications, from construction to automotive repair, these screws are sure to provide reliable performance. The thread size is 13 and the system of measurement is inch. The screws come from the trusted brand Brighton Best and are categorized under Business & Industrial and Fasteners & Hardware.I can Make Customs Size lots upon request-Larger Or Smaller
Buy It Now
Free Shipping Condition: New – Open box Location: Findlay, United States Lot of 4 Crosby lifting eye bolts. 5/8-11 Thread. 1.75" Thread length.
Buy It Now
Free Shipping Condition: New Location: Grayslake, United States
Buy It Now
$9.00 Shipping Condition: New – Open box Location: Pottsville, United States
Buy It Now
Free Shipping Condition: Used Location: Lake City, United States CONDITION: rusty; but still useful.
Buy It Now
Free Shipping Condition: New Location: Bonaire, United States High Corrosion Resistance - 1500+ Salt Spray Test Hours. 18-8 Coated Stainless Steel.
Buy It Now
$19.51 Shipping Condition: New – Open box Location: Barrington, United States LOT OF 24 each 1” X 6” T-HEAD BOLT AND NUT Cor-Ten Steel, Birmingham Fastener, MJ Water Main Bolt for Mechanical Joint fittings of sizes 30” and 36”.Never ... moreinstalled surplus. 24 bolts, 24 nuts total in the lot.Questions welcome thanks.
Buy It Now
$10.00 Shipping Condition: Used Location: Miami, United States Screws are from an inventory surplus pile. Lot may contain a small amount of other screws, bolts or nuts that may have been mixed in with the lot.
|
|
|
|
(1) 12 Pt. Point Flanged Head Machine Bolt RH 5/16"-24 x 1-5/8" 71658-5-18 S15
1) Used 12 Point Flanged Head Machine Bolt 5/16"24 Right Hand Threads 1/2" Long 1-5/8" Shaft Length Under Head 2" Overall Fastener Length Stamped On Head: 71658-5-18 S15 Flat Rate Standard Shipping Anywhere USA 1st: $2.00/ Each Additional: $0.50
|
|
|
Lot of 10 Titanium 10mm x 1.5 Thread x 55mm Bolt Sets
Titanium 10mm x 1.5 Thread x 55mm Long Bolt Sets USED IN Great CONDITION Titanium 10mm x 1.5 Thread x 55mm Long Bolt Sets Ran through rock polisher to clean any stains from surface. Did not effect the threads. We have a 100% guarantee minus shipping on all DOA's. No COD's. We are striving to sell these items in other formats and if there are no bids posted. This sale may end at any time. If you have any questions. Please feel free to email us. CHECK OUT OUR STORE( PLATING SURPLUS) FOR SIMILAR ITEMS WE HAVE LISTED! THANKS FOR LOOKING! JASH-HB-jash Please see pics for more details. Item(s) will generally be shipped within 2 business days of receipt of payment. Certain images and/or photos used in this template are the copyrighted property of JupiterImages and are being used with permission under license.
|
|
|
20 -- 3 in X 3/4 in Bolt s , 20--Nuts & 40-- washers
In this auction We are selling ONLY 20 bolts. 20 nuts, 40 washers for 1 money. PayPal for payment please. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13e2c9dc194-0xf5-
|
|
|
Tie Clip Clasp Goldtone #10 Bolt Necktie Holder 1.5"
Tie Clip Clasp Goldtone#10 Bolt Necktie Holder 1.5"
|
|
|
Nut & Bolt Metal BBQ Man Figurine Collectables
Black Metal/iron nut bolt BBQ Man grilling. 6 3/4 tall 3 in wide Posted with Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ebd5f0c22-0x100-
|
|
|
4 inch titanium bolt, nut, and washers
This item is sold only as a set composed as below. One 3/4" x 10 x 4" inch titanium hex head bolt. 3 1/2 inch thread length with matching titanium washers and nut. The nuts are pretreated with thread locker adhesive. Being titanium they are strong. Very light and corrosion resistant. They look practically new. Ideal to weather any storm. More than 10 available. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ebd5f0c14-0x104-
|
|
|
Pack of 8 Sturdi Bolt #28-H with Square Nuts. Vintage. Never Used
PLEASE… ONLY BID IF YOU INTEND TO PAY FOR THE ITEM Payment due within 3 days of auction end You are bidding on A Vintage Pack of 8 stove bolts and square nuts. Made by Sturdi Bolt#28-H They are Flat Head Bolts Overall. Good, unused condition PLEASE see pictures. PLEASE NOTE: I am not a dealer. Everything that I am listing is from my personal property. I am cleaning out 3 generations of stuff from my house. PLEASE ASK ANY AND ALL QUESTIONS PRIOR TO BIDDING. FREE SHIPPING FOR USA RESIDENTS ONLY* IF YOU ARE FROM OUTSIDE OF THE UNITED STATES AND WISH TO BID ON AN ITEM. PLEASE CONTACT ME FIRST FOR A SHIPPING QUOTE. I package my items well. But will not be responsible for any damages during shipping If you 0 or negative feedback. You must contact me prior to placing a bid or I will cancel it. too many problems) I accept PayPal! Good Luck and thanks ... morefor looking
|
|
|
(80) M10 x 1.5 x 45 Hex Bolt w/ Washers & Nut Stainless Steel Grade 304
Quantity(80) M10- 1.5 x 45 Hex Bolt. Fender Washer, Flat Washer, Split Lock Washer& Hex Nut Stainless Steel Grade Type 304 Combined shipping on hardware is offered These are like new. See photo for condition. Normal 0 Many times technical information is provided from Internet searches and other sources. We are not responsible for any inaccurate information or specs that may have been changed. We accept PayPal. Payment is expected within 7 days. All items are shipped with 24 hours. M-F of receiving payment. A tracking number will be supplied to sales within the USA. USPS does not supply tracking numbers on international orders. Freight is determined with the shipping calculator. We cannot control the shipping charges but we will combine shipping when possible. Insurance is used to cover delivery not warranty. Insurance is used at our option. ... moreUSPS orders are insured for the item cost. Fragile items are packed very well and sometimes the container and packing material weighs more than the item so keep in mind the added weight adds to the shipping costs. There is a handling charge to cover packing material. Parcel Post can be very slow. If you need an item quickly please contact us. Any shipping upgrades will be at the buyers’ expense. We will not ship to unconfirmed addresses. If you have changed your address then update your PayPal account and verify the address. The buyer must contact us within 7 days; items must be received within 14 days. A 15% re-stocking fee may be assessed at our option. If you have questions please ask. All sales are as-is. No warranties or replacements are made unless otherwise noted, returns will not be accepted. If a return is offered, any returns must be in the same shape as the items were shipped. Any returned item must be in original condition. Any packaging cannot be opened, all parts must be intact, all items must be returned. Manufacturers packaging must be kept intact. If a buyer breaks a warranty seal then the warranty and return policy is also broken. Buyers pay all return po
|
|
|
3/4-10 X 9 3/4 HEX HEAD CAP SCREWS BOLT GRADE 8 QTY.1 #2767A
SOUTHEASTERN TOOLING IS PROUD TO OFFER FOR YOUR CONSIDERATION: HEX HEAD CAP SCREWS BOLT 3/4-10 X 9 3/4 GRADE 8 BLACK OXIDE DU BRO PRODUCTS. Inc. 1 BOLT NEW OLD STOCK INVENTORY#2767A. Please browse our store and other listings if you have any questions feel free send me a message.New items arriving daily; so if you don't see what you want. Check back. WE GLADLY COMBINE SHIP; Except Auction Items. TERMS and CONDITIONS IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. Please wait for an invoice prior to making a payment. We try to describe every item the best that we can. Although we do have experience in the tooling industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify ... moreany questions. Combined Shipping- We do combine shipping on everything; Except Auction Items. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a cashiers and company checks. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no
|
|
|
Plated Hex-Head Lag Screw Bolt 5/8 x 5" - 14/pcs
14 piece lot of used lag bolts. Are 5/8" X 5" with hex heads. Plating in good condition-a little gray or yellow paint on heads-no rust. A good price for these heavy duty bolts. Will ship to continental USA with tracking#
|
|
|
Lot of (4) Hollow Adjustable Bolt Sets from Robot Base Plate
P1135. Lot of(4) Hollow Adjustable Bolt Sets from Robot Base Plate- After base plate is in position. Stud anchors can be installed in the concrete floor through the center of these bolt units. Please review all of the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
L + H THREADED RODS CORP 5/8" X 2 1/2" X 11 1/2" U - BOLT KIT
FOR SALE L + H THREADED RODS CORP 5/8" X 2 1/2" X 11 1/2" U- BOLT KIT
|
|
|
Chicago Hardware 25 1/2" eye bolt LOT OF 3
LOT OF 3 FOR SALE. GOOD USED CONDITION
|
|
|
CHICAGO #34 EYE BOLT ~ 1-1/2" LOT OF 2 INDUSTRIAL HEAVY DUTY 8" LONG
GOOD USED CONDITION HEAVY DUTY EYE BOLTS. 1.5" THICK. OVERALL LENGTH: ONE IS 8" LONG AND THE OTHER IS 9" LONG. 2.5" OPENING.
|
|
|
EYE BOLT 3/4 INDUSTRIAL 5" LONG LOT OF 10
LOT OF 7 EACH 1/2 EYE BOLTS 1.5" OPENING 5" LONG 2" THREAD LENGTH GOOD USED CONDITION
|
|
|
Mac Tools Master Bolt Grip Set STP600
Click thumbs to Enlarge Any additional photos will be below This bolt set is used and in excellent condition. Tested and works well. Has some light wear from normal use. Please see pictures. Pictures shown are of the actual item(s) you are bidding on. This auction includes only what you see pictured. Auction includes: Bolt Set SKU: H7-20-250-130780-RS Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days or we will file a non paying bidder report and the item will be relisted. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. ... moreWe Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. We Ship to confirmed Paypal and Billing addresses Only! Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: We offer local pickups but please contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
(47) HEX HEAD BOLT - 7"
47 BOLTS
|
|
|
EYE BOLT 5/8 INDUSTRIAL 4.5" LONG LOT OF 6 1.5" DIA
LOT OF 6 EACH 5/8 EYE BOLTS 1.5" OPENING 4.5" LONG 1.75" THREAD LENGTH GOOD USED CONDITION
|
|
|
Nissan Motor Heavy Duty EYE ~ EYELET BOLT 8" #75
Nissan Motor Heavy Duty EYE ~ EYELET BOLT 8" 75 In VERY Good Condition I ONLY ACCEPT PAYMENT FROM US BASED PAYPAL ACCOUNTS AND ONLY SHIP WITHIN THE 48 UNITED STATES PLEASE VIEW MY OTHER AUCTIONS AS I WILL COMBINE AUCTIONS IF POSSIBLE TO SAVE ON SHIPPING CHARGES AUCTIONS ARE AS-IS UNLESS OTHERWISE NOTED PLEASE NOTE MY AUCTIONS ARE MY PERSONAL COLLECTIONS AND/OR PURCHASES FROM ESTATE SALES I CANNOT CLAIM COMPLETE SMOKE OR PET FREE PLEASE DO NOT BID IF YOU ARE NOT GOING TO FOLLOW THROUGH WITH PAYMENT IF YOU ARE BIDDING. PLEASE FORWARD PAYMENT WITHIN 3 DAYS OF AUCTION CLOSING EBAY AUTOMATICALLY OPENS A NON-PAYMENT CASE FOR PAYMENTS NOT RECEIVED WITHIN 8 DAYS OF AUCTION CLOSING PLEASE EMAIL ANY QUESTIONS(Seller Inventory# 1300479)
|
|
|
Big Bolt--Paper weight?--Movie prop?--Other
Big Bolt for sale. New. But handled a lot. Use for a Paper weight? Use for a movie Prop? Use for whatever! Guaranteed to be heavy(4.21 pounds)
|
|
|
Eye bolt/ lifting eye 20mm diameter thread size
This listing is for a lot of 5 used 20 MM eye bolt/lifting eye. These eye bolts have been used once. They came in new machinery. The machines were set and the eye bolts were removed. So they are almost like new. Ships to Continental United states only.
|
|
|
Bronz bolt lot
This auction is for a lot of 7 new bronz 8 inch long bolts with brass butterfly wing nuts. What you see in the picture is what you get. Thanks for looking.
|
|
|
Header Bolts 3/4" length, 7/16" Head Bolt, SBC, Chevrolet, Chevy
Black SBC Header Bolts. Purchased. Too short, Selling as used as I do not have the original packaging.
|
|
|
1/2-13 Various Lifting Eye Bolt W/ Shoulder Forged 1/2"
Questions? Call us: 1-877-328-9236. 1/2-13 Various Lifting Eye Bolt W/ Shoulder Forged 1/2" Manufacturer: Various Model: 1/2-13 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Various Condition: Used. Comes in non-original packaging. Item has scratches from previous use. Notes: This item has not been tested. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) 1/2-13 Lifting Eye Bolt W/ Shoulder, Specifications: Manufacturer: Various, Model: 1/2-13, Shank Diameter: 1/2" Shank Lenght: 1 1/2" Inner eye diameter: 1 3/16" Outer eye diameter: 2 1/8" Shoulder diameter: 0.88" Shoulder thickness: 0.19, Rated capacity: 2.400 pounds, Drop Forged Steel, SKU: L29M049 For questions regarding this item. Please reference the SKU to help ... moreus better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available
|
|
|
Box of 35 Full Threaded Stud Bolt 5" Black w/2H Hex Nuts
Questions? Call us: 1-877-328-9236. Box of 35 Full Threaded Stud Bolt 5" Black w/2H Hex Nuts. Manufacturer: Unknown Model: Unknown Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Unknown Condition: Used. Comes in non-original packaging. Notes: This item has not been tested. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Box of 35 Bolts w/2H Hex Nuts, Specifications: Manufacturer: Unknown, Model: Unknown, Length: 5" Hex Nuts: 2, SKU: M42M019 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals ... moreTerms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to be as described. The buyer must notify us within 14 days of receipt if there is an issue. Returns for any reason other than defects not described incur a
|
|
|
Pair of Forged Eye Bolts - Heavy Duty - Vulcan, Buckeye - 1/2" Bolt With Nuts
Pair of Forged Eye Bolts- Heavy Duty- Vulcan. Buckeye- 1/2" Bolt With Nuts One of these was made by Vulcan. And one side of the ring is embossed"VULCAN NO. 5" And the other reads"DROP FORGED IN USA" T he inner(donut hole) space is 1 1/8" in diameter. While the outer diameter of the ring is 2 1/ 16" The other is very similar and made by Buckeye with the number"2060" near the bolt. The bolt portion looks like 1/2" X 1 1/2" long and the nuts turn smoothly with no bunged-up threads. These are in great shape. And may never have been used, though the Vulcan has light oxidation of the surface. These weigh 11 ounces without packing material or box. Looks like super duty hardware to me! I have multiple hardware listings. I would be pleas ed if you would make multiple purchases. And I will try ... moremy best to provide a nice savings on the shipping! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-14050ceef33-0xf6-
|
|
|
30" Industrial Eye Bolts LMHE 17-4 1 3/4" bolt 2" eye
Industrial Eye Bolts LMHE 17-4 1 3/4" bolt 2" eye Subject to prior sale! Photos show everything that is included. For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! 2943- BLDG 3 FL Normal 0 false false false false EN-US X-NONE X-NONE
|
|
|
3/8-16 x 4-1/4" UNC Hex Head Cap Screw Bolt Grade 8 Black Oxide quantity 4
Bullseye Catalog# 32995 3/8-16 x 4-1/4" UNC Hex Head Cap Screw Bolt Grade 8 Black Oxide quantity 4 SPECIFICATIONS $10 max shipping on any quantity Special Shipping Instructions for any listing where this note appears. If you buy a quantity or a combination of these items and your shipping total is over $10 you are elgible for $10 shipping. Just follow these instructions. First click"buy it now" on all items you wish to buy, then before you pay, contact us and ask for $10 shipping and we will invoice you with the new total. NOTE: DO NOT PAY AND THEN EXPECT A REFUND FOR OVER-PAYMENT, WE WILL NOT DO THAT. THIS APPLIES ONLY TO LOWER 48 STATES. Contact us with any questions. Length Under Head: 4-1/4" Thread Length: 1-1/8" Diameter: 3/8" Thread Size: 3/8-16, Wrench or Key Size: 9/16, Finish: Black Oxide, Material: ... moreCarbon Steel, Grade: 8, These are new"take outs" in great condition, Weight: 0 lb 9 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Da
|
|
|
3.25 INCH BOLT, RECTANGLE WASHER, AND NUT - 100 OF EACH
3.25 INCH BOLT. RECTANGLE WASHER, AND NUT- 100 OF EACH
|
|
|
3/4 INCH BOLT, RECTANGLE WASHER, AND NUT - 150 OF EACH
3/4 INCH BOLT. RECTANGLE WASHER, AND NUT- 150 OF EACH
|
|
|
5/8-11 x 3" inch UNC Hex Head Cap Screw Bolt Grade 8 Galvanized Lot of 4
Bullseye Catalog# 33547 5/8-11 x 3" inch UNC Hex Head Cap Screw Bolt Grade 8 Galvanized Lot of 4 SPECIFICATIONS $10 max shipping on any quantity Special Shipping Instructions for any listing where this note appears. If you buy a quantity or a combination of these items and your shipping total is over $10 you are elgible for $10 shipping. Just follow these instructions. First click"buy it now" on all items you wish to buy, then before you pay, contact us and ask for $10 shipping and we will invoice you with the new total. NOTE: DO NOT PAY AND THEN EXPECT A REFUND FOR OVER-PAYMENT, WE WILL NOT DO THAT. THIS APPLIES ONLY TO LOWER 48 STATES. Contact us with any questions. Length Under Head: 3" Thread Length: 1-5/8" Diameter: 5/8" Thread Size: 5/8-11, Wrench or Key Size: 15/16, Finish: Armor Coat, Material: Carbon ... moreSteel, Grade: 8, These are new take-outs. They were removed off of new axles, Weight: 1 lb 3 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Da
|
|
|
5/8-11 x 4-1/4" inch UNC Hex Head Cap Screw Bolt Grade 8 Galvanized Lot of 2
Bullseye Catalog# 33548 5/8-11 x 4-1/4" inch UNC Hex Head Cap Screw Bolt Grade 8 Galvanized Lot of 2 SPECIFICATIONS $10 max shipping on any quantity Special Shipping Instructions for any listing where this note appears. If you buy a quantity or a combination of these items and your shipping total is over $10 you are elgible for $10 shipping. Just follow these instructions. First click"buy it now" on all items you wish to buy, then before you pay, contact us and ask for $10 shipping and we will invoice you with the new total. NOTE: DO NOT PAY AND THEN EXPECT A REFUND FOR OVER-PAYMENT, WE WILL NOT DO THAT. THIS APPLIES ONLY TO LOWER 48 STATES. Contact us with any questions. Length Under Head: 4-1/4" Thread Length: 1-1/2" Diameter: 5/8" Thread Size: 5/8-11, Wrench or Key Size: 15/16, Finish: Hot Dipped Galvanized, ... moreMaterial: Carbon Steel, Grade: 8, These are new take-offs. Taken off of new axles, Weight: 0 lb 13 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& S
|
|
|
3/4-10 x 6-1/2" UNC Hex Head Cap Screw Bolt Grade 8 Armor Coat
Bullseye Catalog# 33545 3/4-10 x 6-1/2" UNC Hex Head Cap Screw Bolt Grade 8 Armor Coat SPECIFICATIONS $10 max shipping on any quantity Special Shipping Instructions for any listing where this note appears. If you buy a quantity or a combination of these items and your shipping total is over $10 you are elgible for $10 shipping. Just follow these instructions. First click"buy it now" on all items you wish to buy, then before you pay, contact us and ask for $10 shipping and we will invoice you with the new total. NOTE: DO NOT PAY AND THEN EXPECT A REFUND FOR OVER-PAYMENT, WE WILL NOT DO THAT. THIS APPLIES ONLY TO LOWER 48 STATES. Contact us with any questions. Length Under Head: 6-1/2" Thread Length: 2-1/8" Diameter: 3/4" Thread Size: 3/4-10, Wrench or Key Size: 1-1/8, Finish: Armor Coat, Material: Carbon Steel, ... moreGrade: 8, These are new take-offs in good condition, These came off of axles that were never used, Weight: 0 lb 14 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently?
|
|
|
M24 x 3.0 x 285mm Metric Socket Head Cap Screw Bolt Class 12.9
Bullseye Catalog# 33542 M24 x 3.0 x 285mm Metric Socket Head Cap Screw Bolt Class 12.9 SPECIFICATIONS $10 max shipping on any quantity Special Shipping Instructions for any listing where this note appears. If you buy a quantity or a combination of these items and your shipping total is over $10 you are elgible for $10 shipping. Just follow these instructions. First click"buy it now" on all items you wish to buy, then before you pay, contact us and ask for $10 shipping and we will invoice you with the new total. NOTE: DO NOT PAY AND THEN EXPECT A REFUND FOR OVER-PAYMENT, WE WILL NOT DO THAT. THIS APPLIES ONLY TO LOWER 48 STATES. Contact us with any questions. Length Under Head: 285mm, Thread Length: 75mm, Diameter: 24mm, Thread Size: M24x3.0, Wrench or Key Size: 19mm, Finish: Blue, Material: Alloy Steel, Class: 12.9, Weight: 2 lb ... more7 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly.
|
|
|
Golden Gate Bridge Bolt from 1932
This is a bolt off The Golden Gate bridge. It is from 1932. They used to change the bolts on the bridge every two years. Cause the bolt will rust faster than normal in the damp bay weather. It was given to me by an bridge engineer who was in on the original design of the bridge.
|
|
|
LOT of 35 1/4-20 x 1-1/8" Overall Thumb Screw Leveling Bolt Bumper Bolt
LOT of 35 1/4-20 x 1-1/8" Overall Thumb Screw. Leveling Bolt Bumper the threads on the pieces are clean and look to be unused. The Nylon or plastic heads are dirty from being stored in a cabinet shop. The threads are about 7/8"s long. The head has a knurled collar and are about 1/2" in diameter. PAYMENT Payment is due immediately for all“ Buy it Now” sales and within 4 days of the end of all on- line auctions. The eBay Office Assistant has been set to automatically open an“Unpaid Item” case 4 days after the end of the auction if payment has not been received. If there is any reason you cannot comply with the above terms. Such as a cash transaction for a local pick up or an unanticipated payment delay, please contact us ASAP and make us aware of your situation. SHIPPING Domestic shipping charge is $4.95. This charge covers both ... morethe shipping cost as well as the cost of packaging and materials. The package will ship USPS Priority Mail. USPS Parcel Post. Fed Ex Ground or UPS Ground within 2 business days of receipt of payment. We are happy to offer Consolidated Shipping rates whenever possible. Please contact us and let us know which items you are interested in and what you Zip Code is so we can provide you with the reduced cost and arrange invoicing for the purchase. We welcome International buyers for all items that do not present shipping or customs challenges. We understand that International shipping costs are high and do not add any additional handling charges to International orders. International buyers please review calculated shipping costs prior to ordering. RETURNS We do our best to provide eBay buyers accurate descriptions and photographs and encourage you to ask questions prior to bidding on or purchasing an item. If you are not satisfied with your item after receiving it please contact us immediately with your concerns. We will accept return of any item and issue a refund of the purchase price of the item upon receipt of the purchased item in the same condition in which it was shipped. F
|
|
|
Qty(15) 3/8" x 4-3/4" Shoulder Bolt Alloy Steel Oil Finish
You are invited to bid on a qty(15) shoulder bolts. These are 3/8” dia. X 4-3/4” shoulder length shoulder bolts made of steel alloy with a black oil finish. Overall length is 5-7/16” with a 1/2” thread length and 9/16” head dia. They are old stock and have been sitting unused in their bag for too long. They have some surface corrosion and show their age. They are being sold AS IS. USA-48 ONLY.
|
|
|
Qty(11) 5/8" x 5-1/2" Shoulder Bolt Alloy Steel Oil Finish
You are invited to bid on a qty(11) shoulder bolts. These are 5/8” dia. X 5-1/2 shoulder length shoulder bolts made of steel alloy with a black oil finish. Overall length is 6- 9/16” with a 3/4” thread length and 13/16” head dia. They are old stock and have been sitting unused in their bag for too long. They may have been used at some point and have minor signs of age and corrosion. I am selling them AS IS. USA-48 ONLY.
|
|
|
Qty(17) 5/8" x 4" Shoulder Bolt Alloy Steel Oil Finish
You are invited to bid on a qty(17) shoulder bolts. These are 5/8” dia. X 4" shoulder length shoulder bolts made of steel alloy with a black oil finish. Overall length is 5-1/16” with a 3/4” thread length and 13/16” head dia. They are old stock and have been sitting unused in their bag for too long. They may have been used at one point and show minor corrosion and signs of age. I am selling them AS IS. USA-48 ONLY.
|
|
|
50-Grade 5 JH 1/2" Diameter 1" Coarse thread length Hex Head Bolt +Channel Nut
Hello and thank you for looking! This listing is for a lot of 50 bolts and 50 channel nuts for a total of 100 pieces. The bolts are 1/2' diameter. Coarse thread(13tpi) with a thread length of 1' and overall length of 1-1/4' Some of the Channel nuts are marked PS for powerstrut some are not marked. They were saved from a small structure that was disassembled. Items ship via USPS Priority Mail with a Tracking number! Be sure to check my other items for sale for more great deals. Including Powerstrut and B-line Plates and brackets!
|
|
|
USA STEEL DRAWER NUT BOLT PARTS STORAGE FULL 100's OF SOCKET HEAD SCREWS
USA STEEL DRAWER NUT BOLT PARTS STORAGE FULL 100's OF SOCKET HEAD SCREWS BOX IS IN EXCELLENT CONDITION. 18" x 12" x 3"
|
|
|
122 Pieces Grade 5 Hex Head Bolt 9/16-12x1 + Grade 2 Nut, Zinc Plated 10.3LB
This auction is for 61 zinc plated hex head bolts 9/16-12 x 1" grade 5. Plus 61 zinc plated hex nuts 9/16-12 grade 2. Total of 61 bolts + 61 nuts = 122 pieces, 10.3LB of hardware.
|
|
|
18 Inch Hex Bolts - Super Arc L-50 1000 Lb Reel Bolt - 8 Lot
Itemsdepot 18 Inch Hex Bolts- 8 Lot Reel Bolts Description: 18 Inch Hex bolts with washers and nuts. For use with Super Arc 1000 Lb Coiled Wire Electrode Reels. Each bolt Includes a washer and a nut. Each auction is for a quantity of 8 Bolts. 8 Nuts and 8 Washers. Includes: 8 Eighteen and a half inch Hex Bolts• 8 Washers• 8 Nuts Items may contain light rust and or discoloration. In good working order. Measuring square tool not included, used for reference purposes only. Actual example items shown Shipping and Payment Information: Expedited Shipping to U.S.A and Canada Only• Insurance and internet tracking are included. Additional Duties. If applicable, are the responsibility of the purchaser. Domestic Handling Time: From 1-3 Business days. Paypal Only. Please see the'About Me' link for General Policies. Please see the'About Me' ... morelink for current Combined Shipping Offers. Be sure to add me to your!
|
|
|
Vtg Novelty Abco Hardware Bolt Design Folding Knife Made Italy 1/8" Thick Case
Normal 0 false false false EN-US X-NONE X-NONE Up for bid is a vintage novelty folding knife: This belonged to my dad and has been in storage many years. Bolt-shaped design advertising Abco Hardware. In California. Tang reads"Italy. Measurements- 3 3/8" x 1" x 1/8" blade without tang is 1.5" L. Comes with black snap-closing case with red interior. CONDITION- Aesthetically. It is in good, pre-owned condition. However. The knife needs sharpening and there are some scratches/marks on the body. The black paint on the snap has worn away. Please review all photos and let me know if you have any questions. That's it- thank you for your interest in my listing! AUCTION GUIDELINES Please ask all questions during the auction process. At this time. I do not accept“local pickup. I do my best to provide all possible details ... moreto help you make an informed bid. However. I am human and will make mistakes. Please know that your complete satisfaction is the most important thing to me. If there is any problem after receiving the merchandise. Please let me know. I will do everything I can to resolve the problem for you. PAYMENT I accept Paypal only. Please pay for your purchases within 3 days. Thank you. Purchases within the state of Washington will have sales tax included. Note- if you reside in Washington and win the auction. Please wait to receive an invoice from me before paying. RETURNS If. For any reason, you are not satisfied with your purchase, you may return it, within 60 days, for a full refund, less shipping charges. Costs incurred to return the item will be paid by the customer. However. If I inadvertently misrepresent the item, in any way, I will pay the return shipping charges. SHIPPING If you are interested in purchasing more than one item. I am always happy to combine shipping for you. Please contact me for a quote. Item will ship the next business day(excluding weekends and holidays) after payment is received. For international shipments. Customer is responsible for all customs fees/duties/
|
|
|
Steel Hex Bolt Grade 2 Zinc Plated Finish 3/8" -24 x 1/2" 100 count
Browse our Store. Sports& Outdoors Video Games Home& Garden Health& Beauty Clothing. Shoes& Accessories Electronics Musical Instruments/Gear Cameras& Photo Customer Service. Today's Hot Deals Steel Hex Bolt Grade 2 Zinc Plated Finish 3/8" 24 x 1/2" 100 count(49021) P1603364) PACKAGE CONDITION: Opened manufacturer's packaging FUNCTIONAL CONDITION: 100% Fully Functional COSMETIC CONDITION: Packaging has been opened ITEMS INCLUDED: Pack of bolts ITEMS KNOWN TO BE MISSING: PLEASE SEE PHOTOS FOR WHAT IS INCLUDED. Please do NOT ASSUME an item is included if it is not in the photo. SPECIFICATIONS: COLOR: Steel Arkansas Buyers must pay a 6% Sales Tax. Click an Image to Enlarge Some images may be stock photos. Please read ITEM DESCRIPTION. ABOUT US HotLiquidationSpot has partnered with some of the Nation's ... morelargest retailers and distributors to aggressively liquidate consumer merchandise. This merchandise is generally customer returns. Overstock items, refurbished or even brand new unused retail shelf pulls. Please note: If the item is a known refurbished item, it will be stated in the listing as well as any other condition known. Also, we do offer BRAND NEW merchandise on some of our other listings. Please see auction condition for details. WHY BUY FROM US? WE WORK FOR YOU. ALL merchandise is tested prior to listing unless it is sealed in the factory package. This will include powering on the unit and checking all the major functions. You will find condition and testing notes in the item description. This helps our buyers know EXACTLY what they are getting. WE EARN YOUR BUSINESS. We have worked with thousands of ebay members to achieve the best service available anywhere. If you have any questions before or after the sale. Please contact us. We check and respond to our messages often. We will work with you to make your purchase the best it can be. WE COMMUNICATE. We are here for you. Use the ASK THE SELLER A QUESTION button to contact us anytime. We check these messages often thro
|
|
|
A193 B7 Stud Bolt + 2 Heavy Hexagon 2H Nuts ASTM A194
Up for sale is a B7 stud bolt with two 2H nuts. The bolt and nuts have a bit of their coating missing. Please see photos. The coating appears to be SermaGard and/or Xylan. Information on these coatings is available. Measurements in Inches: Length: 3.5 Diameter: 9/16 The bolt says"B7" followed by"L1" on one end. Technical information on the nuts is.
|
|
|
Lewis Bolt & Nut Company - 25 zinc plated 1/2 x 4 gimlet point lag bolts
Lewis Nut& Bolt Company Vintage lag bolts Box of 25 Zinc plated. Rust resistant 1/2" x 4" long Gimlet Point Lag Bolts Check out my other items! I am happy to combine shipping on any items. PLEASE NOTE: Most of the items I sell are from three generations of family heirlooms that we have no room for. While others belong to friends or relatives. I do my best to research the items and attempt to describe them accurately using photos and text. Also. I will clean off the surface dirt but I usually won't attempt to fix things that I'm not sure about fixing. Please keep in mind that most of what I sell is vintage and/or used and is not sold in‘new off the shelf’ condition. Though I do say when the items are brand new or in‘like new’ condition. International Buyers International buyers are responsible for custom fees and may ... moreincur longer shipping times due to custom delays. Priority shipping is always an option; I cannot take responsibility for packages after they are in the possession of the USPS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3/4-10X3 Grade 5 Hex Bolt / Cap Screw lot of 8pcs.
A lot of 8 3/4-10X3 Hex Bolts GRADE 5 used Cleaning out my shop they have been sitting on a shelf for over 10 years just gathering dust Will combine shipping on multiple purchased item if possible
|
|
|
Inconel (?) Non-Magnetic Bolt
We are not positive that this bolt is made of Inconel. On the head of the bolt it has"IN 718" When we did a search on the web for information on this number it came up as"Inconel" On the head of the bolt it has. IN 718 SPS The overall length of the bolt is 2 7/16" The threaded area of the bolt is 1 7/8" x 3/4" Threaded Diameter(approximately) Weight: 6 Oz. Similar to the one in the pictures. Used! But it is in excellent condition. Please remember that the shipping cost to ship this item to a location within the United States is included in the selling price! No one can truly ship anything for free. The only difference between listings with free shipping compared to listings without free shipping is that the customer knows exactly how much the item will cost when purchasing it! Please be aware that our shipping ... moreand handling fees reflect not only the cost of shipping your purchase to you. But also the cost of packaging materials. Our time and most importantly, our time hand delivering each package to the US Post Office. There is NO mail delivery or pick-up in our community. With the cost of fuel, we feel our shipping and handling costs are extremely fair! Save on shipping costs. By buying multiple items. We use flat rate priority mail boxes& envelopes. Whenever possible! This helps save our customers money on their shipping and handling costs when they purchase multiple items. Check out our other great items we have in our ebay store. Camo/ BDU clothing Sizes from XS to 6XL! Items are being added weekly. So bookmark this page& return often, for you will never know what we`ll have for sale! Due to the increasing number of sales. It is taking longer for us to ship o
|
|
|
Craftsman Nut and Bolt Breaker
Craftsman Nut and Bolt Breaker No 43381 Thank you for agreeing to pay your shipping charges. I ship US Priority Mail unless I receive an email from you prior to shipping with your preferred method of shipping.
|
|
|
Copper Bolt 1/2"-13 X 5-1/2" (Lot Of 10)
Pictured are a lot of 10 1/2" X 5-1/2" grade 8 copper bolts in excellent condition.
|
|
|
1 One Steel Press Machinery Shoulder Lifting Eye Bolt M20 2400 LBS Or More
Auction is for one. I have 2. Steel DIN580 Machinery Shoulder Lifting Eye Bolt M20 2400 LBS 316SS Industrial lifting eye bolt. Precision cast grade 316 steel for superior lifting 20mm thread size. 1.5 inch thread length, 20mm shank diameter; standard metric thread, electronic polish 40mm eye inside diameter. 70mm eye outside diameter; length overall 100mm, weight 13.9 oz Shoulder pattern allows more flexibility in lift angle; European DIN580 style Working load limit 2400 lbs. came off high end printing press
|
|
|
M56 EYE BOLT WLL11.5T
Concepts Industrial M56 EYE BOLT WLL11.5T Guaranteed not D.O.A. 222. SW 22. 3/11/2014 HE We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return ... morepolicy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received without prior written approval. Customer Service is available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Mar-11-14 at 14:13:58 PDT. Seller added the following information:
|
|
|
NorthStar Premium V8 Thread Repair Kit J-42385-2030 M11 X 2.0 Cylinder Head Bolt
NorthStar/ Premium V8 Thread Repair Kit J-42385-2030 M11X2.0 Thread pitch Cylinder Head Bolt Kit. Bought the wrong one we needed the M11x1.5 so just trying to make our loss back Thanks for looking.
|
|
|
Peer BL Leaf Chain Anchor Bolt 3x4 Lacing OAL 86"= 40 Links Used
Peer Leaf Chain with Anchor Bolt 3 x 4 Lacing OALength 86” 40 Links 5/8” Between Pins Leaf OALength 2” Leaf Width 7/8” Leaf Thickness 3/16” Anchor Bolt Length 4-5/8” Used– no OEM box See all photos for condition– Storage and Use Grime& Marks Weight 19lbs 15oz All returns must be made within 14 days of delivery(Electrical items are NON-REFUNDABLE) Items MUST be returned in the same condition as when they were purchased. Items not returned in the same condition will not be accepted. A 10% restocking fee will be applied to all returns. Returned Items. Shipping Charges, Insurance and Tracking Information are the buyer’s responsibility until returned item has been received by Great Lakes Army Surplus(GLASI) Buyer has 48 hours upon delivery to notify GLASI if they have received defective. Damaged, incorrect or incomplete items. All items returned ... moreto GLASI require a return authorization code from a GLASI customer service agent. For a return authorization number contact us through eBay.
|
|
|
SIX 3/4" THREAD 6" LONG HEX HEAD CAP SCREW BOLT LE USA GRADE 5
PLEASE NOTE: Our website cmsurplus carries products of all kinds and nature mostly aftermarket automotive. Tools, industrial and household items. We always describe the items to the best of ability. If you have any questions contact us, SIX 3/4" THREAD 6" LONG HEX HEAD CAP SCREW BOLT LE USA GRADE 5. you get 6 of these. these will in a bulk bin so they have marks I dont know they were used or not condition is great eitherway.
|
|
|
8 WEDGE CEMENT ANCHOR BOLT 3/4C 4 1/4" LONG X 3/4" THREAD DIAMETER IN PACKAGE
8 3/4C CEMENT BOLT. 4 1/4" LONG X 3/4" THREAD DIAMETER(LISTED AS USED BECAUSE OF NO PACKAGING BUT APPEAR TO BE IN GOOD WORKING ORDER) SINGLE ITEM READY TO BE SHIPPED IS 5 LB 2 OZ I WILL COMBINE SHIPPING AT CALCULATED PRICE. LET ME KNOW HOW MANY YOU WANT
|
|
|
Gray 5/8"-11 UNC Lifting Eye Bolt 1-3/4" Shank w/Shoulder 2 Ton Cap USA 2pcs
Gray 5/8"11 UNC Lifting Eye Bolt 1-3/4" Shank w/Shoulder 2 Ton Cap USA 2pcs SPECIFICATION Bullseye Catalog# 46711 Brand: Gray, 5/8" 11 UNC thread size, 1-3/4" shank length, 1-3/8" inside eye diameter, 2-1/2" outside diameter, 4-3/4" overall length, 4.000 Lb weight capacity, Weight: 1 lbs 7 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please ... morelet us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-499
|
|
|
1"-8 UNC Shoulder Pattern Eye Bolt 2-1/2" Shank 1-3/4" Eye 4.5 Ton USA
1"8 UNC Shoulder Pattern Eye Bolt 2-1/2" Shank 1-3/4" Eye 4.5 Ton USA SPECIFICATION Bullseye Catalog# 46696 1"8 UNC thread size, 2-1/2" shank length, 1-3/4" inside eye diameter, 3 1/2" outside diameter, 6-1/2" overall length, 9.000 Lb weight capacity, Weight: 2 lbs 6 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the ... morephone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight qu
|
|
|
7/8"-9 UNC Lifting Eye Bolt w/Shoulder 2-1/4" Shank 3.5 Ton Cap USA Lot of 8
7/8"9 UNC Lifting Eye Bolt w/Shoulder 2-1/4" Shank 3.5 Ton Cap USA Lot of 8 SPECIFICATION Bullseye Catalog# 46688 7/8"9 UNC Thread Size, 2-1/4" shank length, 1-5/8" inside eye diameter, 3-1/4" outside diameter, 6" overall length, 7.000 Lb weight capacity, Weight: 13 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone ... morenumber above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote.
|
|
|
1"-8 UNC Shoulder Pattern Lifting Eye Bolt 2-1/2" Shank 1-3/4" Eye 4.5 Ton USA
1"8 UNC Shoulder Pattern Lifting Eye Bolt 2-1/2" Shank 1-3/4" Eye 4.5 Ton USA SPECIFICATION Bullseye Catalog# 46670 1" 8 UNC thread size, 2-1/2" shank length, 1-3/4" inside eye length, 3-1/2" outside diameter, 6- 3/4" overall length, 9.000 Lb weight capacity, Weight: 2 lbs 3 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know ... moreat the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a fr
|
|
|
Armstrong 1-1/4"-7 UNC Lifting Eye Bolt w/Shoulder 3" Shank7.5 Ton Cap USA 2pcs
Armstrong 1-1/4"7 UNC Lifting Eye Bolt w/Shoulder 3" Shank7.5 Ton Cap USA 2pcs SPECIFICATION Bullseye Catalog# 46668 Brand: Armstrong, 1-1/4" 7 UNC thread, 3" shank length, 1-1/8" inside eye diameter, 4-3/8" outside diameter, 8" overall length, 15.000 Lb weight capacity, Weight: 9 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us ... moreknow at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a
|
|
|
C15CG M30x3.5 Metric Eye Bolt Lifting Ring 46mm Shank SWL36T 7.5 Ton Capacity
C15CG M30x3.5 Metric Eye Bolt Lifting Ring 46mm Shank SWL36T 7.5 Ton Capacity SPECIFICATION Bullseye Catalog# 46667 Model: C15CG, M30 x 3.5mm thread size, 46mm shank length, 60mm inside eye diameter, 108mm outside diameter, 160mm overall length, 15.000 Lb vertical weight capacity, Weight: 4 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number ... moreabove. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COM
|
|
|
Industrial Grade Stainless Steel Eye Bolt
UP FOR SALE INDUSTRIAL GRADE STAINLESS STEEL EYE BOLT. EYE WIDTH: 2-1/4" THREAD: 5/8 X 10 BOLT LENGTH: 6-1/4" BOLT HAS SCRATCHING AND OXIDATION OF STAINLESS STEEL. I AM NOT AN EXPERT ON THIS PRODUCT. SO PLEASE ASK QUESTIONS BEFORE BUYING. PLEASE REFER TO PHOTOS. PLEASE WRITE WITH QUESTIONS. THANK YOU!
|
|
|
7/8 x 5-1/2 A325 Bolt Hot Dipped Galvanized
28qty 7/8x 5 1/2 A325 Type 1 Heavy Hex Bolt Hot Dipped Galvanized Heavy Hex A325 structural bolts are designed for steel to steel structural connections. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
7/8 x 4 1/4 A325 Bolt Hot Dipped Galvanized
19qty 7/8x 4-1/4 A325 Type 1 Heavy Hex Bolt Hot Dipped Galvanized Heavy Hex A325 structural bolts are designed for steel to steel structural connections. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
7/8 x 5-3/4 A325 Bolt Hot Dipped Galvanized
27qty 7/8x 5-3/4 A325 Type 1 Heavy Hex Bolt Hot Dipped Galvanized Heavy Hex A325 structural bolts are designed for steel to steel structural connections. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Chicago Hardware # 29 Machinery Eye Bolt Shoulder Pattern
Vintage Chicago Hardware# 29 Machinery Eye Bolt. 7/8" 9 Shoulder Pattern 1-11/16" inside eye. 3-1/4" O.D. made in USA- overall length 6" Shank Length 2-1/4"
|
|
|
1/2-13x1 3/4 Serrated Hex Flange Screw / Bolt UNC Zinc Plated, Pk 100
These where used to hold a crate together for shipping and then removed. All like new condition. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14518006862-0x10d-
|
|
|
Vintage Eyebolt Bolt Screw Hardware 1/2" x 6" SWL = 2200 Pounds Lbs
A vintage eyebolt. 1/2" x 6" never used, but rusty. Thanks for looking!
|
|
|
Hex Head Lag Bolt screws 3/8 X 5-3/4" and 3/8 X 6-3/4" ---- 20 pcs
12 pcs 3/8 X 5-3/4" Lag Bolts Screw. 8 pcs 3/8 x6-3/4" Lag Bolts Screw. 20 3/8" Washer. Nicely sized for that larger project. Used but in good condition.
|
|
|
45 FNL JH BOLT 1"-9 X 2 1/2" FREE SHIPPING.. LOT OF 45
45 FNL JH BOLT 1"9 X 2 1/2" FREE SHIPPING. LOT OF 45 Posted with
|
|
|
TITANIUM BOLT AND NUT, 1.20" DIA X 7" LONG.
These bolts are 1.20" in diameter on the unthreaded shank and 7" long. I am assuming this works out to a 1.25" bolt size. Some of these look new but I assume all are used. I have a number of these so inquire if interested. Look around and see what these cost new for this LARGE size but be sure you are sitting down when they quote you. Alloy unknown except that this is titanium. This is for one nut and one bolt. These have holes drilled in them for anti vibration retaining cables in the nut and bolt head. PLEASE NOTE in the second picture that there is variation in drilled/not drilled and some turning of points on flats in some cases. I can't guarantee you get exactly what you want as I run out so what you are guaranteed is ONE NUT and ONE BOLT with size as described. I can fit up to four in a flat rate box so shipping up ... moreto four will be $12.50 to USA only. This is a per nut and bolt set price. One bolt one nut = $45.00
|
|
|
(10), 5/8-11 x 3-1/2" A325 structural steel bolt, galvanized, with nut and lock
Bid is for 10. 5/8-11 x 3-1/2" A325 structural steel bolts with nut and lock washer. These are galvanized all galvanized and appear to have been in storage for some time. Overall length is 3-7/8" and the head width is 3/8" The nut depth is 5/8" making the compression range 2-3/8" Bolt head and nut use 1-1/16" wrench. Thread length is 1-1/4" I ship just as soon as payment is received and you only pay one $6.00 shipping charge no matter how large the order. Orders of $50.00 or more are shipped FREE.
|
|
|
EYE BOLT 1/2-13 EXTENDED 10 1/4 TO SHOULDER 12 3/4 OAL #J53424
EYE BOLT 1/2- 13 EXTENDED 10 1/4 INCHES TO SHOULDER 12 3/4 INCHES O.A.L. QTY 1 INVENTORY# J53424 USED
|
|
|
3 lbs.Aluminum Hex Head Bolt/Cap Screw ¼"-20 x 1/2 - 3/4 - 1" & nuts and washers
For sale is 3 lbs. of aluminum hex head and some tapered slotted head aluminum bolts. Thread size 1/4 x 20 and includes aluminum nuts and flat washers. The hex head are 3/4" and 1" long. The slotted head are 1/2" long thread. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-145926dd062-0x10b-
|
|
|
2 BURNDY Split Bolt Connectors KS26 #14-2/0 (Electrical,Copper)
2 Burndy copper split bolt connectors. Ks26 May not have been used Threads in good shape. Nuts turn freely.
|
|
|
SBH Toggle Bolt plated 3/16" x 2" to hang fixtures on hollow wall
3/16 x 2 inch toggle bolts plated instructions: drill 1/2" hole through hollow wall or ceiling. Insert bolt through fixture, attach wing to bolt, push wing through hole, using screwdriver tighten until fixture holds firmly to wall surface.
|
|
|
ASSORTED LOT SQUARE HEAD LAG BOLT SCREWS ANTIQUE VINTAGE OLD 5 PIECES
UP FOR YOUR CONSIDERATION ARE 5 SQUARE HEAD LAG BOLT SCREWS. THESE ARE IN USED BUT GOOD CONDITION WITH SOME USE WEAR AND AGE DISCOLORATION. HAVE SOME SURFACE RUST.
|
|
|
SPX Kent-Moore J 42385-100 TimeSert Main/Head Bolt Thread Repair M10 M11 5.7L GM
J-42385-100 contains the tools required to repair the threads for the main bearings or head bolts in small-block V8 engines. All required drills. Counter-bores, taps, drivers, guide plates, and inserts are included. Time-Sert thread repair inserts are the preferred repair method specified by GM Powertrain. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Wood Screw, Nuts and Bolt Bin Measures 13" x 8" x 3"
Wood Screw. Nuts and Bolt Bin Measures 13" x 8" x 3"
|
|
|
Vintage Heavy Duty Buckeye Eye Bolt 4" long 2 3/4" wide Farm Industrial
Vintage Buckeye Heavy Duty Eye Bolt. It measures approx. 4" long. Width across is approx. 2 3/4" Hole diameter approx. 1 1/2" Width of threaded end only approx. 5/8" measuring the threads also. Around 3/4" in width. See closeup. Length of threaded end approx. 7/8"1" long. I believe it is some kind of forged steel but I could be wrong. This is what someone told me it was. It does have a seam around the edges. A magnet does stick to it. It's heavy almost 13 oz. Pre-owned. In good vintage condition. It does have some surface rust and some little dings. It is as I found it. I will leave cleaning up to the buyer. Please LOOK at all 10 pictures since these are part of the description and shows condition and size. The pictures on the wood were taken outside in the shade without a flash. The pictures with the ... moreyellow ruler and green sheet were taken inside with a flash. I have no idea what this was used for and I don't know the thread count. Thread diameter, grade, coating, model etc. Paypal is due within 48 hours from end of auction. Items mailed within 2 business days after payment's been received/cleared. Shipping via Priority/insured flat rate box. Rates shown are USPS online*Discounted* rates and is based on a buyer's zip code and 1 lb. package size. Since this is a small flat rate box and this eye bolt is all that will fit in it. I can't combine with other items unless the buyer is willing to pay for regular Priority non-flat rate online prices. Combined shipping: For auction items: you must wait UNTIL all auctions have ended(within a 3 day time period) so I can send you a combined invoice for all items. Then you can make ONE payment in FULL. For buy it now items: you MUST add to cart ALL the items you want to buy. Once you add 1 item you'll see a link to continue shopping. Once you're finished shopping you can checkout. Your shipping discount will be shown then you can checkout and you can make ONE payment in FULL. Thanks for looking.
|
|
|
24 MM R&K EYE BOLT 1-1/2 Inch of Theards
You are bidding on a R&K Eye Bolt.it is a 24MM dia with Stanard 24MM TPI- Threads Per Inch.S/H $5.85
|
|
|
12 MM CISE EYE BOLT 3/4 Inch of Theards
You are bidding on a Cise Eye Bolt.it is a 12MM dia with Stanard 12MM TPI- Threads Per Inch.S/H $4.85
|
|
|
Alden 4017P Grabit Drill-out Broken Bolt Extractor, 4 pc. kit
Broken Screw Removal Alden 4017P Grabit Drill-out Broken Bolt Extractor– 4 Piece Kit Like new condition– the kit is used but individual used extractors have been replaced with new. Description: Drill-out is a drill-bit and extractor in one tool. It drills into broken bolts on center and extracts them cleanly using the power of the drill. The secret is in the serrated extracting end of the tool which drills down and wedges itself into the bolt. Resulting in greater torque for hard to remove bolts. Simply chuck the self-centering bit, set your drill to reverse and drill at medium speed to extract bolt. Made in USA Features: Drills up to grade 8 and 10.9 class fasteners with no pilot hole required. Unique drill tip allows tool to stay on center. Self-centering drill tip eliminates walking and wandering. Works on jagged. Uneven and rough breaks. ... moreMade from M2 HHS. The highest quality steel used and made in USA. In the Box: Four(4) piece kit includes bits to remove bolts in sizes: ¼” 5/16” 3/8” ½” M6. M8, M10, M12.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146f9d9cf0c-0x115-
|
|
|
Alden 7017P Grabit Drill-out Broken Bolt Extractor, 7 pc. kit
Broken Screw Removal Alden 7017P Grabit Drill-out Broken Bolt Extractor– 7 Piece Kit Like new condition– the kit is used but individual used extractors have been replaced with new. Description: Drill-out is a drill-bit and extractor in one tool. It drills into broken bolts on center and extracts them cleanly using the power of the drill. The secret is in the serrated extracting end of the tool which drills down and wedges itself into the bolt. Resulting in greater torque for hard to remove bolts. Simply chuck the self-centering bit, set your drill to reverse and drill at medium speed to extract bolt. Made in USA Features: Drills up to grade 8 and 10.9 class fasteners with no pilot hole required. Unique drill tip allows tool to stay on center. Self-centering drill tip eliminates walking and wandering. Works on jagged. Uneven and rough breaks. ... moreMade from M2 HHS. The highest quality steel used and made in USA. In the Box: Seven(7) piece kit includes bits to remove bolts in sizes: Three regular Drill-Outs(5/16” or 8mm. 3/8” or 10mm& ½” or 12m Four micro Drill-Outs(No. 5-6 or 3mm. No. 8 or 4mm, No. 10 or 5mm& No. 12 or 6mm)
|
|
|
LARGE BOLT 10" x 9/16" / 11 TPI - 7/8" SQUARE HEAD / Includes 2 WASHERS & 1 NUT
LARGE BOLTS 10" x 9/16" 11 TPI 7/8" SQUARE HEAD INCLUDES 2 WASHERS& 1 NUT. Threaded section 1.75" Long GREAT CONDITION,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-147068e7a32-0x101-
|
|
|
-4 90 degree bolt thru
5 of these available. Use like new
|
|
|
AN fitting -4 90 degree bolt thru
5 of these available. Use like new.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-147600e0a23-0x111-
|
|
|
eye bolts, quantity 4, steel Marked K-3 USA K and a 1 bolt is 2 1/2" long
Threaded Machinery Eye Bolts N-3 USA K Marked with a 1 very heavy duty The Bolt part is 1" and is approx 2 1/2" long
|
|
|
ASSORTED LOT OF Socket Head Shoulder Bolt Stripper Screws
This is a lot of stripper bolts in good condition. Specifications: sizes: MIXED Comes exactly as shown in pictures.
|
|
|
BOLT 1 1/2" L X 3/8 "HEAD 307A ZL LOT OF 31
Concepts Industrial BOLT 1 1/2" L X 3/8"HEAD 307A ZL LOT OF 31. PHOTO REPRESENTS 1 OF A"LOT OF 31" GUARANTEED NOT DOA. 245. SW12. 07/31/14 RK. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/ not working are sold as is and no returns will be accepted. Please ask any questions before purchasing item(s) ... moreReturns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received without prior written approval. Customer Service is available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Jul-31-14 at 15:52:57 PDT. Seller added the following information:
|
|
|
Lot 5/8-11x1 3/4 Grade A325 Structural Bolt Galvanized with tons of nuts/washers
5/8-11x1 3/4 Grade A325 Structural Bolt UNC Hot Dip Galvanized. 17 bolts, ~50 nuts, and ~50 washers. What you see in the photos is what you get! Huge lot of bolts. Nuts and washers. Item Description: Structural Bolt Size: 5/8-11x1 3/4 Thread Type: UNC(Coarse Thread) Grade: A325 Material/Finish: Steel/ Hot Dip Galvanized Notes: Please review specifications in the item description before buying. If you have any questions or doubts. Or if your requirements include specific dimensions, please contact us before buying. We ship UPS and Fedex. Please pick your preferred shipping method at checkout. FedEx is usually cheaper but IS NOT TIME DEFINITE. Please remember that USPS delivery time estimates are only estimates. USPS does not guarantee delivery on or by a certain date. If you need your order on or by a certain date. Please select a UPS shipping ... moreoption-all UPS services have a guaranteed delivery date. All UPS services are available, even if not shown in the listing. If you would like your order shipped FedEx/UPS UPS etc. please send us a note. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147964d5320-0x11c-
|
|
|
Vulcan EB-23 Eye-Bolt 5 1/2 Overall 3/4 Thick
Hey i'm cleaning the shop a little more and found a bunch of these eye lets so if you need some. Check out my other items more will be listed soon. This auction is for 1 Vulcan EB-23 Eye-Bolt The overall length is 5 1/2" Length of the tread is 2" and a 3/4-10 nut screws on fine. The eyelet is 2 3/4" Outer diameter and Inner diameter is 1 1/2" 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-1479d721468-0x108-
|
|
|
3/4-10 x 5-3/4 Stainless Steel Bolt Quantity 2
Stainless Steel Hex Bolts Thread Size: 3/4"10 Length Under Head: 5-3/4" Quantity: 2(As shown in the picture. This bolt is not fully threaded) You are buying a pack of 2 Stainless Steel Hex Bolts. Also referred to as Hex Head Cap Screws. This product is used.
|
|
|
3/4 x 10 x 3 1/2" Socket Head Cap Screw Bolt, Lot of 2
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! From dads machine shop, 2 at 3 1/2. 1 at 3.
|
|
|
Sems Dog Point Sae 5/16-18 3/4 Bolt Cage Body Fender Panel Ford Mopar Chevy GM
This auction is for a total of 24 Vintage Sems Dog Point# 2 Grade Bolts. All are 5/16- 18 x 3/4" and all bolts having a 1/2" SAE indented hex head and have the non slip type spin washer that has 13/16" outside diameter. These black parkerized/ phosphate coated bolts were widely used in the automotive industry in the early 60's- early 80's. So look at the pictures and do your homework. Started out Low with No Reserve and No Buy It Now Price for Guarantee Sale to the highest bidder. I try to describe everything as best as possible. If you would like more info or pic's on this item. Please ask now. All items are sold as is, But I Will Insure Customer Satisfaction. Returns are accepted ONLY if item received IS NOT AS DESCRIBED and I am contacted within 3 days of you receiving a damaged shipment. If item needs returned ... moreyou the buyer will be required to pay for return shipping with tracking. FREE U.S.P.S. Shipping and Handling cost is for All U.S.A. and It's Territories Zip Codes Only. Please email me your complete address for shipping cost to any other destinations. If you win multiple auctions Please wait for me to send you a combined invoice. When possible I will combine auctions into 1 box and reduce shipping cost accordingly. Thanks For Looking and Check out my Other Items!
|
|
|
Sems Dog Point Sae 5/16-18 3/4 1 Bolt Cage Body Fender Panel Ford Mopar Chevy GM
This auction is for a total of 22 Vintage Sems Dog Point# 2 Grade Bolts. There is 11 bolts that are 5/16- 18 x 3/4" and 11 bolts that are 5/16- 18 x 1" all bolts having a 1/2" SAE indented hex head and have the non slip type spin washer that has 13/16" outside diameter. These black parkerized/ phosphate coated bolts were widely used in the automotive industry in the early 60's- early 80's. So look at the pictures and do your homework. Started out Low with No Reserve and No Buy It Now Price for Guarantee Sale to the highest bidder. I try to describe everything as best as possible. If you would like more info or pic's on this item. Please ask now. All items are sold as is, But I Will Insure Customer Satisfaction. Returns are accepted ONLY if item received IS NOT AS DESCRIBED and I am contacted within 3 days of ... moreyou receiving a damaged shipment. If item needs returned you the buyer will be required to pay for return shipping with tracking. FREE U.S.P.S. Shipping and Handling cost is for All U.S.A. and It's Territories Zip Codes Only. Please email me your complete address for shipping cost to any other destinations. If you win multiple auctions Please wait for me to send you a combined invoice. When possible I will combine auctions into 1 box and reduce shipping cost accordingly. Thanks For Looking and Check out my Other Items!
|
|
 |