|
2010 Chmer 64 GS Wire EDM
2010 Chmer 64 GS Wire EDM This Machine was purchased new in 2010. It is a lightly used piece of equipment in our business which is the reason for the sale. It has very low hours( Est. at 1500 or less) This Wire EDM has the following features: 600 mm( x axis) x 400 mm( y axis) x 250 mm( z axis) Working Envelope 5 axis Control for tapered cutting Closed Loop Refrigerated Chiller Water Filtration Unit with water resistance monitor/ control. Glass Scales Wire Alignment Tool Specifications: Maximum Size of Work Piece: 930 x 700 x 295 mm Maximum Weight of Work Piece: 450 Kg Motor System: AC Servo Motors Wire Diameter Range: 15- 30 mm Max. Wire Feed Rate: 300 mm/sec Wire Tension Range: 300- 2500 gf( Dancer Controlled) Max Taper Angle: +/ 21 degrees Outside Dimensions: 2550 x 2450 x 2250 mm Coolant Tank Capacity: 650 L Net Weight( Including Power ... moreand Coolant System) 3200 Kg AC Power Requirements: 3 Phase. 220 Volt +/ 10% 13 KVA This machine is under power and available for viewing and test cuts. Please contact us to set up an appointment: cd@ams-1.com If you are in the market for a late model Wire EDM loaded with features with low hours. This is it. The terms of the sale are FOB: Louisville. KY, Certified Funds to clear before shipment. Rigging can be arranged at a pass through cost. No warranty is offered as it is being sold"As Is"
|
|
|
Charmilles EDM tapping head Agie Elox Sodick Excello Cincinnati Chevalier Kent
This is a used Charmilles EDM tapping head complete and in orginal condtion with everything that came with it. It is in very good to excellent condtion. I bought this with the intention of adapting it to my Elox but never did. I have since closed my shop and have no need of it. Thanks for looking.
|
|
|
System 3R EDM Tooling System 3R-8.5 220/115VAC Orbi Cut
System 3R EDM Tooling System 3R-8.5 220/115VAC Orbi-Cut This Listing is for(1) System 3R Orbi-Cut USED. ShelfS11 071335000GB/TT Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. ... moreNo exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question
|
|
|
Lot of EDM Graphite Rods, used, 100 pieces, .0885" to .251"
Up for bid are 100 graphite rods. They range in size from.0885" to.251" There are 29 pieces that appear to be unused. Ends are square. They range in length 2 1/2" to 4 1/2" There are 71 pieces that have been machined on one or both ends. They are 1" and longer. Please check my feedback and bid with confidence. My goal is to make every sale a positive experience. Please check out my other machinist tools. I will combine shipping if possible. Feel free to ask questions. And thanks for looking. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1400f7fe799-0x106-
|
|
|
System 3R 20mm Round Electrode Holder Chuck for Sinker EDMs EXC!
System 3R 20mm Round Electrode Holder Chuck for Sinker EDMs in excellent condition. This chuck looks new. The pins and hydraulics are excellent and the mounting face is very clean, not a mark. Will ship in a medium flat rate box. Thanks for looking!
|
|
|
Syatem 3R Ball Bearing Rotating Indicator Holder for Sinker EDMs EXC!
System 3R Ball Bearing Indicator Holder in excellent condition. This holder is on a 20mm round shank and includes all the factory hardware and arm for holding different style indicators. Very clean. A quality 3R product. Will ship in a small flat rate box. Thanks for looking!
|
|
|
System 3R Rotating Head Assembly for Sinker EDMs VGC!
System 3R Rotating Head for Sinker EDMs. This head appears to be in good working condition. The bearings are smooth and tight and the belt is in good shape. This tool was working when last used, but is sold as is. There is no controller with it, only the head assembly. It includes two flush fittings, the hydraulics work fine and the mounting plate is very clean. Also includes factory storage case, which is also in good shape, not split and the latches and hinges work well. Thanks for looking!
|
|
|
System 3R Electrode Spin Type Fixture for 20mm Round Electrode Holders EXC!
System 3R Holder to fit spin type fixtures. This holder accepts 20mm round holders and fits most. If not all, spin fixtures, including Harig and Suburban. It is in very nice condition, the hydraulics work well and the pins are like new. The collet end is very clean, a very nice, quality holder. Will ship in a large flat rate box. thanks for looking!
|
|
|
HANSVEDT LEADMAN SINKER TYPE EDM (Electrical Discharge Machine)
ebay template Hansvedt EDM 1995 MS-2 Leadman PICTURED IN USE Currently running at customer's facility and showing great performance and working ability. The Leadman is a rugged floor-type machine capable of handling medium-to-large molds. It utilizes heavy-duty cast iron construction in the frame. Worktable and ram components to assure maximum rigidity and stability. Turcite-lined vee and flat worktable ways allow large workpieces to be positioned smoothly and accurately. Pin-release handwheels and caliper-type locks prevent accidental table movements. This machine includes a precision V-way. Cross roller bearing ram system with a high-responce DC servo motor and ballscrew drive. A large T-slotted platen provides a convenient mounting surface for large electrodes. The Leadman features an adjustable backslide head. By manual crank, which ... moreextends the platen-to-table range so that small jobs can be clamped directly to the worktable. Setting up and measuring larger jobs is convenient with Hansvedt's two door worktank. Both the front and right side doors swing open for operator accessibility. The Leadman high efficiency dielectric systems respond quickly from rough cutting to fine finishing conditions. An adjustable worktank level/overflow discharges dirty fluid through a 25-micron prefilter screen while a high volume pump continuously filters fluid in the reservoir. An additional high pressure pump/filter system delivers clean fluid to the worktank manifold for flushing and worktank circulation. Changing the prefilter and cartridge filters is easy and economical. INCLUDES MS-2 Leadman/ M-Pulse CNC Owner's Manual System 3R Tooling FEATURES 50-amp Power Supply 100-gallon dielectric system 8" Ram Travel 8" Backslide Micrometer Down Stop Orbit Stop/Lock Servo Functions Twin High Intensity worklights One-shot Lubrication System SPECIFICATIONS MACHINE TOOL Positioning Table Travel 10.2" x 13.3" 260 x 340 mm Worktable Size 13.7" x 23.6" 350 x 600 mm Worktank Size 22" x 35.4&quo
|
|
|
Agie-Charmilles CUT 20 EDM Rethreading Module 135.017.496
This is a fully functional Rethreading Module for an Agie-Charmilles CUT 20 EDM. It is still in great shape. Posted with
|
|
|
Pacific Controls 760-20 EDM Machine
Pacific Controls 760-20 EDM Machine Manufacturer:Pacific Controls Model/Part Number:760-20 Details: Unit removed directly from a Manufacturing facility laboratory line in working condition. Good physical condition. If you need more pictures or any additional information please give us a call and we'll be glad to. Provide them. Or if you prefer, you are welcome to come over and see. The machine on-site at our warehouse facility. General Classification of Item:IN WORKING CONDITION Estimated Weight:1.000.00 Estimated Dims LxWxH(inches) 50.00 x 100.00 x 80.00 Reference Number:T30297 Click an Image to Enlarge Greetings from the Southwest. We are TEAM International Inc, 2nd Hand Store to the Trade. TEAM is a trading company. We buy and sell just about anything. We are always up to making a deal so please feel free to inquire. Check-Out Now! ... moreClick the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you desire a freight quote. Custom shipping, or any extra service we can invoice you after the purchase with your request. Please give us a call or eBay message with your request. Payment We are open to any and all payment methods. We also take credit card payments over the phone. 915) 219-7095• Payments can also be sent to: TEAM International Inc accounts payable 2901 Durazno Ave El Paso TX 79905 Sales Tax: For shipments to Texas addresses. We are required by State law to collect 8.25% Sales Tax. ATTENTION TEXAS RE-SELLERS: If you have a Texas Resale Tax Certificate we can remove the Texas Sales Tax. Shipping We ship all around the world. If you need something out SAME DAY/OVERNIGHT please give us a call to confirm(915) 219-7095• Shipments Under 60 lbs. UPS: Our primary carrier is UPS for domestic shipments. USPS: For International shipments we use USPS DHL International: We can ship on your DHL account. Please send account number with or
|
|
|
SYSTEM 3R CONTROL INSTRUMENT MACRO CONTROL ROD 3R-606 --- GREAT SHAPE
SYSTEM 3R CONTROL INSTRUMENT MACRO CONTROL ROD 3R-606 SYSTEM 3R CONTROL INSTRUMENT MACRO CONTROL ROD 3R-606. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT ... moreCUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R BLOCK EDM CHUCK HOLDER --- GREAT SHAPE
SYSTEM 3R BLOCK EDM CHUCK HOLDER SYSTEM 3R BLOCK EDM CHUCK HOLDER. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R EDM RAIL MOUNT FOR VISE --- L@@K
SYSTEM 3R EDM RAIL MOUNT FOR VISE SYSTEM 3R EDM 4 INCH VISE. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
System 3r 466-5033a macro to jr chuck edm tool holder manual 32 adaptor
System 3r macro to jr manual adaptor 32. Model 3r-466-5033a. New cost is $2325. Buy used and save big. Free shipping lower 48 states.
|
|
|
SYSTEM 3R ROTATING SPINDLE DRIVE 3R-1.65S --- GREAT SHAPE
SYSTEM 3R ROTATING SPINDLE DRIVE 3R-1.65S SYSTEM 3R ROTATING SPINDLE DRIVE 3R-1.65S. IN GREAT WORKING CONDITION. PLEASE EMAIL OR CALL WITH ANY QUESTIONS 718-698-8400. THIS UNIT SELL FOR OVER 12.000 NEW. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY ... moreBLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R 1" VISE --- L@@K
SYSTEM 3R 1" VISE SYSTEM 3R 1" VISE. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R MINI BLOCK EDM CHUCK HOLDER #3 --- GREAT SHAPE
SYSTEM 3R MINI BLOCK EDM CHUCK HOLDER#3 SYSTEM 3R MINI BLOCK EDM CHUCK HOLDER. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275 ... more1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1402aca1bb3-0xf6-
|
|
|
SYSTEM 3R MINI BLOCK EDM CHUCK HOLDER #2 --- GREAT SHAPE
SYSTEM 3R MINI BLOCK EDM CHUCK HOLDER#1 SYSTEM 3R MINI BLOCK EDM CHUCK HOLDER. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R MOUNT HOLDER
SYSTEM 3R MOUNT HOLDER SYSTEM 3R MOUNT HOLDER All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R EDM 4 INCH VISE --- L@@K
SYSTEM 3R EDM 4 INCH VISE SYSTEM 3R EDM 4 INCH VISE. THERE WAS A CRACK ON THE END OF THE VISE THAT WAS PROFESSIONALLY WELDED STRAIGHT WITH NO WARPS. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO ... more6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
SYSTEM 3R EDM 4 INCH VISE GREAT SHAPE --- L@@K
SYSTEM 3R EDM 4 INCH VISE GREAT SHAPE SYSTEM 3R EDM 4 INCH VISE GREAT SHAPE. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1402aca1bc8-0xf6-
|
|
|
PRECISION EDM CTA COLLET CHUCK WITH SET OF COLLETS SNT-12F BT35 SHANK
Precision CTA Collet Chuck Includes set of Collets BT35 Shank Type SNT-12F For EDM Machines Collet Sizes Include 6.8,10,12,14,15,16, 17 MM Collet measure approx 2" long For Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
PRECISION GRINDING FIXTURE WITH AN EROWA EDM QUICK CHUCK 50 4-1/8" CENTER HGT
Precision Grinding Indexing Fixture Fixture is fitted with a Erowa Precison Quick Chuck 50 for Grinding EDM electrodes 4-1/8" Center Height Extended Base plate measures 4"x 12" x 3/4" Brand of indexer unknown. Possibly a harig. Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
System 3R Electrode Holding Squaring Block on 20mm Round Shank for Sinker EDMs
System 3R Electrode Holding Squaring Block mounted on a 20mm Round Shank. Holder is very clean. Not beat up or rusty. It does not come with clamps. Will ship in a medium flat rate box. Thanks for looking!
|
|
|
Harig Grind-All #1 Spin Fixture w/System 3R Chuck for 20mm Round Holders, VGC!
Harig Grind-All#1 Spin fixture with a System 3R Chuck for 20mm Round Electrode Holders. All in very nice condition. The Harig is clean and very smooth, the handle has been replaced, but it works well. It has 4 stops on the outer ring and the surfaces are nice, not beat up. It does not include a V block, but they are available from Harig. The System 3R Holder is very clean, the pins are excellent and the hydraulics work well. A great combo for an EDM shop. Will ship in a large flat rate box. Thanks for looking!
|
|
|
SYSTEM 3R MANUAL COMBI CHUCK 3R-460.34 --- L@@K
SYSTEM 3R MANUAL COMBI CHUCK 3R-460.34 SYSTEM 3R MANUAL COMBI CHUCK 3R-460.34. IN GREAT CONDITION USED VERY LIGHTLY. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU ... moreCAN CONTACT CUSTOMER SERVICE@ 718-370-3275 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-1402cd5166d-0x102-
|
|
|
System 3R Presetting Station 16106-00 Dovetail Rail
System 3R Presetting Station 16106-00 Precision Granite Block Includes- Granite Block 3R 16106-00 Dovetail Very well maintained Made in Switzerland
|
|
|
LOT OF EDM WIRE COBRA CUT GISCO BEDRA GERMANY
Lot of EDM Wire 1 Full 57 Yard Roll Bedra Cobra Cut Type A 1 Full 45.6 Yard Roll Gisco Cobra Cut Type A 1 Partial Bedra Gisco Mega Cut Type A Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140327920ba-0xfc-
|
|
|
Westhoff Ultra-Sensitive Model 100 EDM Drilling Machine
LIKE NEW! Very lightly used. Functions great. Westhoff Model 100-2 Ultra Sensitive Drill Table Size- 8 1/2" x 8 1/2" Variable Spindle Speeds up to 10.000 RPM, 1/8" Keyless Chuck, Work Table Travel- 10" Horizontal Travel- 18" Vertical Travel- 10" Weight- 60 lbs.
|
|
|
SYSTEM 3R 1.6 / 3R-8.0 motor/head and Speed Contorller w/wood case - WORKS GREAT
Complete SYSTEM 3R in great working condition. Runs very smooth and quiet. Variable speed adjusts nicely and has good power. Also looks near new condition, this unit obviously has not seen much use. Comes with motor/head assembly, Speed controller, spare parts(belts, brushes, tools, etc. and the original wood case with foam inserts and durable hinges to keep everything secure. Feel free to ask any questions!
|
|
|
Hirschmann System 5000 H5.50.1 Wire Sink EDM Clamper & Adjustment Pallet 5C
Used Hirschmann H5.50.1 EDM electrode holder, Switched over to System 3R. No longer have use. Excellent shape. Clamping system perfect. Save huge over retail. Check my other ads for other similar items. Thanks for looking!
|
|
|
EX-CELL-O (EXCELLO) RAM TYPE SINKER EDM MACHINE
This auction is for a used but fully operational Excello EDM machine. I used this machine in my shop before the shop closed. It has been sitting in the warehouse for several months now. I could not find a model plate for this machine but I believe it is the Challenger series-correct me if that is inaccurate. This machine has the additional capacitor"tuning" box for best"spark" performance. It also has the adjustable level sensor for the liquid level. It comes complete with a full tank of dielectric fluid. The fluid tank also has a new filter installed. The cover for the enclosed"ram" area has all new rubber seals-no leaks. There are base leveling screws for leveling the machine. Input power is 208 VAC 3 phase 60 Hertz. The separate hydraulic pump comes with the machine. Both the X and Y axis move freely and lock ... moredown as they should. The hydraulic ram and dielectric fluid pump work as they should. Email me if you have questions. I will strap this machine to a strong pallet and prepare/load for shipping at no extra cost. This machine must ship via freight and the buyer is responsible for all shipping costs. USA bidders only please. Please wait for my invoice before paying. No returns on this item please. Buyer must take the entire machine. I have no way to remove parts. Thanks for looking and GOOD LUCK BIDDING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1403aa70a7c-0xf9-
|
|
|
Agie 100/200/300 250/315/612 Wire EDM Solenoid Valve 642.677
Agie 100/200/300 250/315/612 Wire EDM Solenoid Valve 642.677 used. Not sure which series machine it is for. But definitely either 100/200/300 or 250/315/612. If you've ever ordered one of these before, you can match the part numbers. Sold the machine, kept the parts. I have the some other solenoid valves also listed. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
|
|
|
EDM HOLE DRILL ASTEC BEUMONT
Just in today 9-2-13. Just disconnected last week and we were told it ran great. As we cannot try it ourselves we are selling as is! Price reflects such. Astec CDH-3A. We will skid.Band-wrap and load for free.
|
|
|
3R-600-A03 system 3R Adapter
Up for sale is a system 3R Adapter Sweden model: 3R-600-A03 which is used but good condition. The pictures of the original item are attached for your reference. should you need any further clarifications. Please feel free to contact us. Specification Gives access to the Macro system on machines fitted with YB. Thanks,
|
|
|
Elox Mondo4 /Sinker EDM
Elox Mondo4 Sinker EDM Sold As Is, Non-operational- power supply needs replaced. Mechanically. The machine looks good. Shipping is at the buyers expense but we can load. For questions: Call: 330-862-2185 Email: info@kuttlermachine.com.
|
|
|
AXA-DRV268E2.120695 Fanuc board hitachi seiki EDM CNC
Up for sale is a Fanuc Board Hitachi Seiki EDM CNC(AXA-DRV268E2.120695) JAPAN which is used condition. The pictures of the original item are attached for your reference. Should you need any further clarifications. Please feel free to contact us. Thanks,
|
|
|
System 3R 100mm Magnetic Chuck
System 3R 100mm Magnetic Chuck. Lightly used. Great condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EDM MACHINE SINKER RAM EDM HANSVEDT MV20 CNC
Just disconnected and was working great. Hansvedt MV20 75 amps 10x13 table movement. M pulse control. Chuck, orbiting head work lamp coolant tank, no manuals but you can get on line. Will skid and load for free.
|
|
|
EDM SINKER RISER TABLE WITH FLUSH 6" x 9" CHARMILLES
NICE USED RISER TABLE T-SLOTTED AND TAPPED CLAMPING HOLES
|
|
|
CHARMILLES EDM SINKER TYPE ELECTRODE HOLDER WITH COLLETS
CHARMILLES TOOLING WITH COLLETS AS PICTURED.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1405579609b-0x102-
|
|
|
Easco Sparktron Ram Edm
Up for auction is this used Easco Sparktron Model 262. S/N 767695 Ram EDM Machine with 30 amp power supply, metal matching capacitor attachment, and Mitutoyo DROs. Work tank size is approx. 28 inches long, 16 inches wide, and 12 3/4 inches deep, dielectric resevoir tank is approx. 50 gallons. This machine has had good maintance over the years, is under power, 230 volts 3 phase, and a bidder wishing to inspect this machine, or anyone having any questions, please contact me. This machine is for local pickup only, and is being sold as is where is. Payment by paypal before pickup. No returnes on this item.
|
|
|
System 3R Magnum Vise for Wire EDM
System 3R Magnum Vise- 3R-292.6. Approximately 6" Capacity. Leveling Head(3R-282J) Torque Wrench& Wood Case Included. Very Good Condition.
|
|
|
System 3R Reference Element 3R-200.8J-7
System 3R Reference Element 3R-200.8J-7- marked 16475-00. 35mm spacing for 6mm screws 20mm between rows. 343mm(13 1/2" OAL. End stop& screws included.
|
|
|
Mecatool Chucks & Pallets
Includes: Mecatool C846360 setup reference master pallet in wooden box. C220500 dual size chuck with wrench, C185800 pneumatic chuck, 14 pallets(70mm) Also will include 5 plastic trays for storing pallets. Posted with
|
|
|
CHARMILLES WIRE EDM ROBOFIL 2000
Just taken down and sent to us. Built in 1990 and was working fine when disconnected. everything is present. We need to clean and organize for a better presentation. No chiller but can supply a air cooled chiller for you if you buy it now! Will repack and load for free. Many spare components in cabinet.
|
|
|
Sodick A320D Wire EDM w~Chiller Complete
SODICK A320D EDM MACHINE WITH CHILLER& TANKS NEW: 1994 SPECIFICATIONS: X AXIS TRAVEL.12.59" Y AXIS TRAVEL.7.88" Z AXIS.6.88" AUXILLARY AXIS.U&V 1.96" X1.96" HEIGHT FLOOR TO TABLE.35.83" WIRE TENSION. 44-6.16 WIRE FEED RATE MAXIMUM.9.8" WIRE DIA. 0004- 012 OVERALL DIM- 46"X44X"71" 2500LB SHIP WEIGHT EQUIPPED WITH SODICK MARKEX21 CNC CONTROLLER WITH COLOR CRT SCREEN SUBMERGED CUTTING CHILLER PACKAGE WITH TANKS ALL MACHINERY IS SOLD AS IS WHERE IS. WE CAN SHIP ANYWHERE IN LOWER 48 AT PREVAILING RATES PLEASE EMAIL OR CALL 508-365-8395 WITH ANY QUESTIONS MACHINE IS READY TO GO
|
|
|
NICE RUNNING THOMAS TAP DISINEGRATER 10 KVA BURNS TAPS FROM #4-3/4"
GOT THIS IN YESTERDAY FROM A LOCAL SHOP IN A TRADE DEAL I MADE. I PUT 220 3 PHASE TO IT AND IT BURNS FINE. COMES WITH A BUNCH OF NEW ELECTRODES. MOUNTED ON 4 CASTERS. THIS IS A THOMAS TAP DISINEGRATER WITH A JIFFY ELECTRODE HOLDER. MODEL CXR. SERIAL# 901. 18" X 20" T-SLOTTED TABLE. IN AND OUT RAM ARM TRAVEL 12" UP AND DOWN TRAVEL 30" 5" RAM TRAVEL. BUILT IN COOLANT SYSTEM THRU THE ELECTRODE AND ADJUSTABLE BURN RATE. THE TAG SAYS IT WILL BURN TAPS FROM#4 DIA. TO 3/4" DIA. EMAIL WITH ANY QUESTIONS AND BUYER PAYS SHIPPING. THANKS KENNY RUMFORD SUPPLY& MACHINERY COMPANY 263 PINE STREET SEEKONK. MA. 02771 TEL# 1-508-639-5199
|
|
|
Brother HS100 wire edm parts, huge lot
Here is a lot of Brother HS100 parts that were either removed from non-working machines or came with as spares with machines I bought over the years. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
|
|
|
MITSUBISHI EDM DWC 90SB ACTUATOR SWITCH BX992D597H01 ALIGNMENT BLOCK
1) USED MITSUBISHI EDM DWC 90SB ACTUATOR SWITCH BX992D597H01 THIS SWITCH COMES WITH 117.5" CABLE AND(1) EXTRA FEMALE CONNECTOR Please view my other auctions Combined shiofferedpping is
|
|
|
Easco Sparcatron EDM Model #TM916 Serial #1097 In Good Shape W/ Manuals
Used Easco- Sparcatron EDM in good shape Model# TM 916 Serial# 1097 with manuals and electrical charts. This machine was in warehouse storage for approx 9 years. Wired for 240 or 480 volts 3 phase. We can load for free on your flat bed trailer or trucking company flat bed trailer.
|
|
|
EDM Tooling Flushing Manifold 2-1/2" x 10" x10" with 1/4 - 20 tapped holes
Used in good shape EDM flush manifold. Surface ground top and bottom. Approx 2-1/2" x 10" x 10" with a lot of 1/4- 20 tpi taped holes
|
|
|
CS-20 Hansvedt EDM with Acu-Rite DRO In Good Shape W/ Manuals 240 v 1 phase
Used Hanvedt CS-20 Ram EDM Serial#BI-19101 w/ ACU-RITE DRO and manual. This machine has been used very little in the last 7 years. Power Pack HP-1 Serial#BK-19105 wired for 240 volt single phase.Manufactured Date 2/24/99 We can load for free on your flat bed trailer or trucking company flat bed trailer.
|
|
|
EROWA EDM CHUCK WITH EROWA ANGLE PLATE
EROWA EDM CHUCK WITH EROWA ANGLE PLATE NO PART#S ON IT PLEASE EMAIL?
|
|
|
EDM Sinker Model H-PULSE 502 With System 3R Orbiter
HA NSVEDT MODEL H-PULSE 502 EDM MACHINE. INCLUDING System 3R ORBITER SPECIFICATIONS: H-PLUSE 502HA HANSVEDT POWER-SUPPLY FOR EDM Model H-PLUSE 502Average Current, Maximum(Amps) 50 AMPPeak Current Range(Amps) 7 to 64 AMPSNEW IN 1992 POSITIONING TABLE TRAVEL: 15.7" X 19.6"WORKTABLE SIZE: 19.6" X 31.4"WORK TANK SIZE: 27.5" X 49.2" X 18"PLATEN TO TABLE DISTANCE: 29" MAX, 5" MINRAM TRAVEL: 12"BACKSLIDE TRAVEL: 12"INFEED DISPLAY, 1" DIAL INDICATOR: 001"DIVAUTOMATIC SHUT OFF: ADJUSTABLEPLATEN SIZE: 7.8" X 11.8"MAXIMUM ELECTRODE WEIGHT: 550 LBSMAXIMUM WORK PIECE WEIGHT: 3,300 LBSSERVO CONTROLS: MANUAL, DITHER, EDGE-FINDER, AUTO RETRACT, AUTO LOCK ORBIT STOP, ORBIT LIMIT, SERVO SPEED, GAP ADJUST EDM CONTROLS: ARC DURATION, ON-TIME, PEAKCURRENT, POLARITY, ELECTRODEMATERIAL, ... moreGAP INITIATIONMAXIMUM AVERAGE CURRENT: 50 AMPSPEAK CURRENT RANGE PER LEAD: 1 TO 32NUMBER OF PEAK CURRENT SELECTIONS: 7GAP INITIATION VOLTAGES: 75, 150, 300 VOLTSARC DURATION: 1 TO 3686 MICROSECONDS(60 SELECTIONS)NUMBER OF LEADS: 50 AMP/ POWER SUPPLY OVERCUT(INFINITELY VARIABLE) 0005" SLIDEBEST SURFACE FINISH: 10 u INCH RA POSITIVE ELECTRODE(GRAPHITE/STEEL)SINGLE LEAD OPERATION: 1310 CU mm/MINKVA INPUT AT 460 VOLTS: 10.9 DIELECTRIC SYSTEMWORK TANK CAPACITY: 98 GALRESERVOIR CAPACITY: 200 GALFLUSHING PRESSURE, ADJUSTABLE: 0– 50 PSIVACUUM: 0-15 IN HGFILTRATION, REPLACEABLE ELEMENT: THREE 5 MICRO ELEMENTS GENERALMACHINE TOOL AND RESERVOIR: 108" H) X 98" W) X 96" D)POWER SUPPLY: 61" H) X 25" W) X 30" D)NET WEIGHT: 7,615 LBSELECTRICS: 230 VOLTS, 3 PH, HZ 60 FLA 17.9 STANDARD EQUIPMENT 1. RUGGED, CAST IRON MACHINE TOOL WITH A PRECISION V-WAY ANTIFRICTION RAM, POWER BACKSLIDE HEAD ADJUSTMENT, V-FLAT TURCITE LINED WORK TABLE WAYS WITH BALL TYPE LEAD SCREW AND NON-INFLUENCING CALIPER WORK TABLE LOCKS2. BALL TYPE LEAD SCREWS FOR X& Y WORKTABLE POSITIONING3. TWO DOOR WORK TANK FOR CONVENIENT WORK PIECE SET-UP4. ULTRA SENSITIVE DC SERVO SYSTEM WITH BALL S
|
|
|
elox cnc wire edm
ELOX 4 AXIS CNC WIRE EDM Y TRAVEL 9" X TRAVEL7" AUXILLARY PROGRAM COMPUTER. ALL MANUALS. 220 VOLTS 3PH. UNDER POWER.
|
|
|
Lot of 17 EDM electrode holders
Lot of 17 EDM electrode holders. Some are System 3R and some not. There are nice pcs of copper on a couple of these. There is grease. Dirt and graphite on these holders. This is being sold as-is. Returns will be given with the buyer paying shipping. Thanks for bidding!
|
|
|
Lot of 3 EDM electrode vises
Lot of 3 EDM electrode vises. These are homemade but always seemed to work well. There is grease. Dirt and graphite on these holders. This is being sold as-is. Returns will be given with the buyer paying shipping. Thanks for bidding!
|
|
|
Lot of 35 EDM electrode holders
Lot of 35 EDM electrode holders. Some are System 3R and some not There is grease. Dirt and graphite on most of these holders. Storage plate included This is being sold as-is. Returns will be given with the buyer paying shipping. Thanks for bidding!
|
|
|
Mittsubishi SA110 Wire EDM
17.7" x 15.5" x 10.5" tall Machine is under power but recently has a problem with the X axis. Gets servo alarm when jogging in X.
|
|
|
System 3R Ruler 3R-239-915 for Charmilles Robofil 500/510 Wire EDM
System 3R ruler& 2 reference dovetails& accesories shown. 3R-239-915 ruler& 3R-200.10J 490mm(19.29" long dovetail- 35mm spacing for 6mm screws. This is for Charmilles Robofil 500/510 wire edm. Very good condition- note: 2 clamps have been machined to provide extra clearance. List price new is approximately $13.000.00 USD. Shipping to lower 48 United States only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1409e22338a-0xff-
|
|
|
SCHMALZ SEAC 10 RP VD L 10.02.02.03508 TOOLING SYSTEM NOZZLE SEAC10RPVDL
NEW SCHMALZ SEAC 10 RP VD L 10.02.02.03508 TOOLING SYSTEM NOZZLE SEAC10RPVDL.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1409e223354-0x102-
|
|
|
SUMITOMO PREMIUM BRASS WIRE .250mm DIAMETER
aims SUMITOMO PREMIUM BRASS WIRE.250mm DIAMETER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Sumi-Pac Corporation This is a Spool of Brass Wire in good condition. Specifications: Size: 0.01" 0.25mm) = 30 AWG. Type: SBS-25H. Spool Weight: 5.00 kg. Tensile: Hard 1000 N/mm. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUMITOMO PREMIUM BRASS WIRE.250mm DIAMETER Reliable Tool Inc. c 2011 | Powered by
|
|
|
GAMMA 22 LB. SPOOL OF PREMIUM EDM COATED WIRE .012" DIAMETER
aims GAMMA 22 LB. SPOOL OF PREMIUM EDM COATED WIRE.012" DIAMETER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Gamma This is a Spool of EDM Coated Wire in good condition. Specifications: Size: 012" Type: Z-Cut Coated EDM Wire. Spool Weight: 25 lbs. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. GAMMA 22 LB. SPOOL OF PREMIUM EDM COATED WIRE.012" DIAMETER Reliable Tool Inc. c 2011 | Powered by
|
|
|
Handsvedt MV10 Sinker EDM
Up for sale as surplus equipment to the ongoing operations of Phoenix Mold is a Handsvedt MV10. Machine has been serviced by Handsvedt factory service Tech in 2012 and is is Superb running condition absolutely no issues. I am including the System 3R magnet and a System 3R 20mm chuck in the sale magnetic table chuck is not included. I added the larger 17inch monitor for better visibility. The only damage to the machine is shown in the Photos which is the X Axis handle is cracked and the worklight shade is cracked no other issues. The machine runs on 220v 3phase Model# MV10 MP/5025 Serial# 19136 U\V travel on the orbiter is +/200 and works perfectly this machine will hold"tenths" if programmed properly. Any questions please call or I prefer Text 267.229.6975 My Rigger will load on your truck for a flat rate of $300 Payment is by PayPal ... moreor Cashiers Check within 5 days of close
|
|
|
EDM ROTOBORE HEAD SYSTEM RBH EDM DRILLING
you are bidding on a used working EDM ROTOBORE HEAD SYSTEM RBH EDM DRILLING. Come with what you see in photos only, no extra, for oversea shipping please e-mail for shipping cost, good luck. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-140ec454675-0xf4-
|
|
|
EDM rotary spindle, fits system 3r mini, rotating er16 chuck
EDM rotary spindle with er16 collet chuck. Head fits the System 3r 100mm mini magnetic chuck(not included) as shown in the last pic. Chuck has internal rubber cone seal. So no special collets or seals needed for flushing thru the electrode. Baldor dc gearmotor, 344rpm, with a shop built power supply. Brushes in the head, and the motor in excellent condition. Head and power supply only, no collets, electrodes, or mag chuck included. Will ship in 2 separate boxes. Usps priority flatrate. Sold as-is. No returns or exchanges.
|
|
|
Erowa Swiss 4 1/2 inch Pallet/Holder Workholding System with Spigot- No Reserve
Erowa Swiss 4 1/2 inch Pallet/Holder Workholding System with Spigot- No Reserve In great shape Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
5 pcs JAPAX 128-J03 EDM Tool Holders and Accessories
5 pcs JAPAX 128-J03 EDM Tool Holders and Accessories Auction is for everything in the pics in Very Good Condition Questions? Call Robert at 607-259-5615 43-B.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14107fd049a-0x103-
|
|
|
Pneumatic Compact Chuck for Erowa
Automatic Chuck for Erowa Compact Holders Part number: ER-020963 USED excellent plus condition Guaranteed for 120 days by Sunspot Tooling Systems Satisfaction always or return for a refund! We pay for shipping within the continental USA
|
|
|
Swiss Prismatic Modular EDM Sinker Tooling Set
This is a set of interchangeable tooling for EDM sinkers. Swiss made, excelent quality, all hardened and precision ground, in very good condition. Making it easy to mount electrodes just one time for both machining, grinding, etc, and the sinking, Passages for vacum and flushing in all blocks. Consisting of 2 male round bases. 2 1/2 diameter, a 5C solid adjust tru mount for machining, and a flange mount for EDM on which any of any of 6 included female blocks attach. 1 female ER-32 collet chuck with O ring flushing 1 female rotating. Adjust tru, flushing electrode holder 2 female 2.75 square mounting blocks 1 female 2 inch square mounting block 1 female round 2 1/2 inch mounting block Also included is a 1 3/16 capacity V block clamp and 2.75 square angle block with attachments for thin rectangular slotting electrodes
|
|
|
EDM Technologies 30 Amp Sinker EDM School Machine
EDM Technologies Model 405-B Sinker EDM from a local engineering school. Appears to be a 30 amp and is wired 230v 3 phase. I did not get manuals with the machine but a EDM tech friend of mine powered the machine up and sparked it with a copper electrode to test it. We did not run it long as I did not have the tank filled with fluid. Seems like a basic machine. Great for a tap burner or someone looking to get their feet wet in the edm area without spending much to get started. Machine is heavy and weighs about 4000 lbs. Only slightly overhangs a standard pallet. Inspection in my Aberdeen. NJ shop is welcome call 917-974-7381. NY and NJ residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
AGIE 193392.8 EDM WIRE ALIGNMENT / SYSYTEM 3R #2 --- L@@K
AGIE 193392.8 EDM WIRE ALIGNMENT/ SYSYTEM 3R#2 AGIE 193392.8 EDM WIRE ALIGNMENT. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
(1) Used Japax Model DP-20 Sinker-Type EDM - New 1984
1) Used Japax Model DP-20 Sinker-Type EDM- New 1984 Specifications: Work tank dims: 23.6" x 14.2" x 9.8"H Travels- X axis: 9.8" Y axis: 5.9" Z axis: 7.9" Work table: 16.5" x 10.2" Amerpage: 20 Amps Equipped with: NP5 power supply Automatic down feed 2 Axis DRO Permanent magnetic chuck 3R tool holder Very low hours Inspect in Los Angeles area For more information call Jeff@ 888-998-4440!
|
|
|
Fanuc Alpha A B wire edm feed roller, excellent, lot of three
Here is a feed roller that I am pretty sure fits the Fanuc Alpha A and B series wire edms. I believe the part number is A290-8101-Z383. The price is for three. They look slightly used but the surface is smooth. There is no indication of wear. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
|
|
|
DWC-500UV-29 Compression Spring OD 4.687" ID 4.750" Length 16" Rate 108.8 lbs/in
Diamond Wire Compression Spring Outside Diameter: 4.687, Hole Diameter: 4.750, Work Over Diameter: 3.625, Wire Diameter: 0.500, Free Length: 16.000, Material: Spring Steel, Spring Load: 1020.000, Spring Rate: 108.800, Solid Height: Ends: 6.625 Closed/Ground,
|
|
|
System 3R holder 40 Taper Adapter Lathe for 20MM Chuck
Very good condition System 3R 40 Taper for Lathe chuck Existing Bolt patter accepts 20MM Round System 3R chuck for machining electrodes. Taper is very clean along with mounting surface of chuck Will combine shipping. Check my other ads for similar items! Thanks for looking
|
|
|
SYSTEM 3R LATHE/GRINDING COIN HOLDER CHUCK 3R-443A PLUS EXTRAS
Up for bids I have(1) SYSTEM 3R LATHE/GRINDING COIN HOLDER CHUCK 3R-443A. It also includes(3) brand new junior coin electrode holes and(2) pull studs. The chuck and pull studs are used but in good shape. The coin holders are new. We have moved on to a different system and don't need them anymore. I think the price is as cheap as you will find for this set up. I cant find the original receipt for this set up but if I remember correct it was in the $2000 range. Shipping cost is FREE! Shipping Is to the US only.international shipping will be more. please contact on this! Please see my other auctions for the junior coins and draw bars. Any questions feel free to email me. Please email me for a quote on that shipping.again feel free to contact me with questions
|
|
|
System 3R Drawbar 3R-405.11 (2) pcs $30.00 FREE SHIPPING!
Up for bids I have(2) pieces of the System 3R Drawbar 3R-405.11 They are used but in good shape. We have moved on to a different system and don't need them anymore. I think the price is as cheap as you will find these for. Compare at $80-90 each new!I have over 300 so buy as many as you like. Shipping cost is FREE! Shipping Is to the US only! Want to buy them all? Lets talk.Please see my other auctions for the junior coins and a lathe chuck that allows you to cut electrodes in a lathe. Any questions feel free to email me. Please email me for a quote on that shipping.again feel free to contact me with questions.
|
|
|
Eltee Pulsitron EDM machine and accesories
Comes with original manual; runs and looks great; call to see machine run- 770-653-8447
|
|
|
Erowa V-block Clamp
For auction is an Erowa V-Block used but in good condition. It has the Erowa universal quick connect for use with Erowa quick chuck. Posted with
|
|
|
FANUC TAPE CUT CNC WIRE EDM MODEL W2 - SOLD AS IS DUE TO CIRCUIT BOARD PROBLEM
FANUC TAPE CUT CNC WIRE EDM MODEL W2- SOLD AS IS DUE TO CIRCUIT BOARD PROBLEM Prev Stop Play Next You are bidding on a Fanuc CNC Wire EDM Machine. Model: Tape Cut W2. This machine is being SOLD AS IS due to a bad circuit board. You can use the machine for parts or fix it to make a reliable tool for your shop floor. Max Part Size: 17-3/4" X 25-1/2" X 11-3/4" 1100 Max weight of Part 13-3/4" X 19-1/2" Table Stroke Table Speed: 35" per min We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery
|
|
|
Agie 100/200/300 250/315/612 Wire EDM HUGE PARTS LOT
You are bidding on a parts lot for your Agie 100/200/300/250/315/612. I had all of this listed separately but have now combined it all. I will just combine all of the descriptions and pictures so you know what you're getting. 1. Agie 100/200/300 250/315/612 Wire EDM Solenoid Valve 643.257.9 NEW never used. Not sure which series machine it is for. But definitely either 100/200/300 or 250/315/612. If you've ever ordered one of these before, you can match the part numbers. Sold the machine, kept the parts. Some additional numbers from the valve: 481865C2 F DZ02C2 24V/= 9W 2. Some of the part numbers: 380.027. 271.564, 291.294, 214.614.0, 273.664, 071.607.6, 139-062, 214.614.0. I'd be happy to send you more pictures of the items, or answer any questions about what is included. 3. Agie 100/200/300 250/315/612 Wire EDM Solenoid Valve ... more642.677 used. 4. Agie 100/200/300 Series Wire EDM High Pressure Flushing Pump. Bought at auction. No way to test it. So unsure if it works. Info from the motor: Unitec AG Kloten Switzerland M typ SLf 71 B 2/84 220/380 V 2.37/1.37 A.55 k@ cos.85 50/60 Hz.75 HP 2810/3370 UpM 5. Agie 100/200/300 250/315/612 Wire EDM Solenoid Valve 643.257.9 NEW never used. Some additional numbers from the valve: 481865C2 F 24V = 9W If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
|
|
|
THREE Istema Imea 20mm Holders PLUS Magnet Holder EDM
Four items here. The first three are used Imea Istema 20mm Holders for your EDM machine. The last is what I believe to be a 20mm holder for a magnet. Do not quote me on this. However. It has a flat ground surface on one side and on the opposite a 20mm holder. These both came with a machine that I have, but I use 3r tooling. My loss is your gain. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
|
|
|
System 3R Drawbar 3R-405.11 CHEAPEST ON EBAY! $12.00 EACH! FREE SHIPPING!
Up for bids I have(6) pieces of the System 3R Drawbar 3R-405.11 They are used but in good shape. We have moved on to a different system and don't need them anymore. I think the price is as cheap as you will find these for. Compare at $80-90 each new!I have over 300 so buy as many as you like. Shipping cost is FREE! Shipping Is to the US only.international shipping will be more. please contact on this! Want to buy them all? Lets talk.Please see my other auctions for the junior coins and a lathe chuck that allows you to cut electrodes in a lathe. Any questions feel free to email me. Please email me for a quote on that shipping.again feel free to contact me with questions.
|
|
|
System 3R Junior Coin 3R-491E. CHEAP! ONLY $15.00 PER DOZEN!
Up for bids I have(1) dozen(12) pieces of the System 3R Junior Coin 3R-491E electrode holders. They are used but in good shape. We have moved on to a different system and don't need them anymore. I think the price is as cheap as you will find these for. I have over a 1000 so buy as many as you like. Shipping cost is for(1) dozen but of course will work with you on bulk shipping. Want to buy them all? Lets talk.Please see my other auctions for the pull studs and a lathe chuck that allows you to cut electrodes in a lathe. Any questions feel free to email me. Shipping cost provided is to the US only.international shipping will be more. Please email me for a quote on that shipping.again feel free to contact me with questions.
|
|
|
EDM HANSVEDT BENCHMAN *COMPLETE* 3R HOLDER ANALAM DIGITALS
Just in 9-11 Hansvedt EDM with work lamps. Work chuck,digitals,3R head,oil. PLUG and play! Will package,band,wrap and load for free.
|
|
|
Belmont EDM CNC Oscillating 40x80 bed Large EDM
One of a kind great EDM tank. CNC controller programmable. Smart burn process. Auto touchoff probe for picking up work piece. You can put an arowa or other brand auto chuck on this machine and it can do tool changes. Run in line with a cnc machine and robot arm for full automation. Etc. Or just use conventionally. This machine is fully programmable. Oscillating burns capability, Burns in x, y, and Z directions! Work piece area is 43" x 93" with a clamping table area of 35.5 x 55. Full flooding machine if needed. Full auto fire system, you name it, this machine has it. Same machine new would cost you between 300.000 to 700,000! 120a. 220v. 14KVA. Also: Belmont can train your employees or yourself on this machine for an hourly fee and maintenance the machine as well. Full manual included. The machine is in full working order and can ... morebe seen under power if serious buyer. This machine is great for large jobs or small jobs. Very accurate and with. The oscillating feature can hold the tightest tolerances.
|
|
|
AGIE EDM Test -box 100D 780494
AGIE EDM Test-box 100 D 780494 Pulled from a running machine
|
|
|
AGIE EDM Check -box 100D 766124.2
AGIE EDM Check-box 100 D 766124.2 Pulled from a running machine jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1413987b39d-0x101-
|
|
|
4 JAPAX EDM CHUCKS TOOLING 128-J03 MACHINIST DIE MAKER TOOLING
DESCRIPTION: USED. TOOLING FOR A JAPAX EDM. LOOK AT THE PICTURES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST T
|
|
|
Mitsubishi M35J CNC Sinker Ram Type EDM Machine Controller JC7G35
Mitsubishi CNC Sinker Ram Type EDM Machine System comes complete. Currently under power and ready for use. Buyer is responsible for all rigging. Disconnect, crating and transportation costs. Model: M35J Controller Model: JC7G35 Contact Justin at 503.464.6013 with any questions. The unit is located in Flint. MI. WORLDWIDE SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: ... moreThe buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility closure. This means the items are still or have very recently been in production and under power. We strive to only sell quality items and do the best job possible in describing the items accurately. All items a
|
|
|
Japax Wire EDM Power Supply.
This power supply was removed from a Japax wire EDM that we no longer used. Was working when it was removed. If you have any questions please ask. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14153f6a423-0xfd-
|
|
|
Used 2.000 Diameter 6" LOC NACHI High Speed End Mill in Good Shape
NACHI Brand High Speed End Mill Mikes 2.000 Diameter 6" flute length and 9-3/4" long Good Shape
|
|
|
Remcor CH2003A chiller, wire edm, 24000 BTU/hr cooling capacity
Here is a Remcor CH2003A chiller. I verified operation by hooking the water inlet to the outlet and cooling the water in the internal reservoir. It cooled it down to 40 degrees. The pump pressure gauge does not work. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
|
|
|
Remcor CH1503A chiller, wire edm, 20000 BTU/hr cooling capacity
Here is a Remcor CH1503A chiller. I verified operation by hooking the water inlet to the outlet and cooling the water in the internal reservoir. It cooled it down to 39 degrees. After it runs for a few minutes. The pump starts to leak so that(pump shaft seal?will need to be repaired. It doesn't leak when turned off. Or for the first few minutes after starting up. The pump is a Price Pump Co. M/N 32711; 716-500-S111-2302 if you want to investigate a seal price. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
|
|
|
EDM ISTEMA IMEA EDM HOLDER GRAPHITE ELECTRODE
ONE NICE IMEA HOLDER $180 OR BEST OFFER
|
|
|
System 3R Maco Indicator Spindle 3R-656.2
For sale one System 3R Indicator Spindle. Model# 3R-656.2 in excellent used condition in original wooden Box. New cost is over $2600 usd
|
|
|
MACHINIST TOOLS LATHE MILL System 3R EDM Fixture Chuck ?
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. Sold as is, no returns. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE ... moreSEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.BBBB
|
|