|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Brookpark, United States SODICK #K1CN EDM HOLE POPPER. Video will open in a new window. Paste link into a browser window:[isdntekvideo]. We have a loading dock and fork lifts ... morewith the ability to load any type of truck. we can either use your account number or provide a rate quote.
Buy It Now
Condition: Used Location: Bridgeport, United States Sodick Small Hole Drilling EDM. I have a few videos of it burning a part to the best of my ability. I can send the video links. We can load this machine ... moreonto your truck or trailer at no cost. Feel free to inspect under power.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Condition: Used Location: Newton, United States In plant and still in service. Max Workpiece Size: 22.4" x 16.5" x 9".
Buy It Now
$7.00 Shipping Condition: New Location: Broadview Heights, United States BRASS WIRE, FILTERS, WIRE GUIDES ETC.
Buy It Now
Condition: Used Location: Fullerton, United States Machine is being sold due to the death of the owner. Serious inquiries only. Machine was only used for several months. It only has 144 hrs on it. It is ... morein"like new" condition. It was manufactured January 2013 and installed July 2013. For more information contact Glenn Osborne at 513-539-2700 or email me at glenn@gwmachinery.com Machine is in"as is. Where is" condition. No warranties are implied. Specifications X-Axis Travel 19.7” 500 mm) Y-Axis Travel 13.8” 350 mm) Z-Axis Travel 9.8” 250 mm) U-Axis Travel 3.1” 80 mm) V-Axis Travel 3.1” 80 mm) Wire Diameter Range(min. ~ max. 0.004 ~ 0.012” 0.10 ~ 0.30 mm) Work Tank Dimensions(W x D) 39.0 x 30.0” 990 x 750 mm) Maximum Workpiece Weight 1.874 lbs(850 kg) Distance From Floor to Table Top 37.0” 930 mm) Machine Tool Dimensions 91.0 x 102.0 x 80.0” 2.300 x 2,590 x 2,040 mm) Required Floor Space(W x D) 118.0 x 130.0” 3.000 x 3,300 mm) Machine Weight 6.490 lbs(2,950 kg)
Buy It Now
Condition: Used Location: Louisville, United States MODEL K1CS. SODICK EDM SMALL HOLE DRILL OR HOLE POPPER. WITH DOCK OR FORKLIFT?. Machine Weight 1,212.5 lbs (550 kg). Distance From Guide to Table 1.97” ... more~ 11.81” (50 ~ 300 mm). FUTABA DRO'S. Work Table Size 9.84” x 13.78” (250 x 350 mm).
Buy It Now
$7.00 Shipping Condition: New Location: Broadview Heights, United States AP200 - AP500, PGW200, EXC110, BF, JL series AW330, 453 (AWT). PLASTIC SODICK UPPER FLUSH CUP NOZZLE H2 - 10mm.
Buy It Now
Condition: Used Location: North Salt Lake, United States This is a good-looking machine that does excellent work! It has a large work-tank, as well as a tool changer for production work.
Buy It Now
$9.99 Shipping Condition: New Location: China Original Number: 3051202. Product material: stainless steel + bearing. Fit For : machine AQ550.ASX350L.
Buy It Now
$12.12 Shipping Condition: Used Location: Independence, United States
Buy It Now
$52.25 Shipping Condition: New Location: Broadview Heights, United States QUALITY Brass EDM Wire. The hard wire is good for auto threading and tapers under 7 degrees. This is for ONE 22 lb.
Buy It Now
$500.00 Shipping Condition: Used Location: Marina Del Rey, United States Sodick Small Hole Drilling EDM, model K1C, year 2000 • Model: K1C. • Manufacturer: Sodick. • Year of Manufacture: 2000.
Buy It Now
$35.00 Shipping Condition: New Location: Bulgaria The emulator provides high level of data protection through USB port. It is complicated or even impossible to use the machine, without working floppy ... moredrive. Nalbantov USB floppy disk drive emulator N-Drive Industrial.
Buy It Now
$15.00 Shipping Condition: New Location: Irvine, United States 22lbs (10kg) P10 spool. High Quality EDM Brass Wire. Send Check to 192 technology dr. Site P Irvine CA92618.
Buy It Now
$15.00 Shipping Condition: New Location: Irvine, United States 11lbs (5kg) P5 spool (6.3x0.79"). High Quality EDM Brass Wire Gamma. Send Check to 192 technology dr. Site P Irvine CA92618.
Buy It Now
$18.37 Shipping Condition: New Location: Saint Charles, United States 4 Per Case.
Buy It Now
Free Shipping Condition: New Location: China Fitting Model:Sodick EDM Drill Machine. Guide Size: 13 10 23L. Material: Stainless Steel.
Buy It Now
$37.99 Shipping Condition: Used Location: Archbold, United States Manufacturer Part Number: A UV 1 GA2575. Manufacturer: Sodick. UV Drive-A. We have over 10 years combined experience in Industrial Surplus. We love to ... morehear from you. Serial Numbers must be verified.
Buy It Now
$7.80 Shipping Condition: New Location: Broadview Heights, United States OEM 3080990. ONE (1) UPPER OR LOWER WIRE GUIDE FOR SODICK EDM.
Buy It Now
Condition: Used Location: Oxnard, United States REF: SODICK AQ325L EDM,04/2023. SODICK CIRCUIT BOARD BTR-01(SPW) BTR-01C VER.
Buy It Now
$7.80 Shipping Condition: New Location: Broadview Heights, United States OEM 3080629 aka130820. SAPPHIRE UPPER & LOWER WIRE GUIDE SET FOR SODICK.
Condition: Used Location: Lake Zurich, United States HITACHI CABLE LTD WIRE SIZE.00787IN 3 SPOOLS FOR ONE MONEY NEW IN THE BOX THREE SPOOLS APPROXIMATLY WEIGH 39# FOR ALL THREE 2p5ddv.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-143d2d1ef23-0xfc-
Buy It Now
Free Shipping Condition: New Location: China Applicable: Electrical Dischar ge Machine. Size: 4.8 20 40mm. It would also help you on your decision.
Buy It Now
$4.00 Shipping Condition: New Location: China Applicable: Sodick Wire Cut EDM Machines. We are in endeavor to provide you best service and keep you a happy buying experience from us. No one is EVER ... moreignored!
Buy It Now
$5.75 Shipping Condition: New Location: Broadview Heights, United States SODICK FLUSH CUP.
Buy It Now
$5000.00 Shipping Condition: Used Location: Mexico Prompt, friendly, and accurate service is our focus.
Buy It Now
Free Shipping Condition: New Location: China Material: Sapphire. Upper and Lower Wire Guide.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Fitting Model:EDM Drill Machine. Guide Size: 13 10 23L. Material: Stainless Steel.
Buy It Now
Free Shipping Condition: New Location: China Fitting Model:Sodick EDM Drill Machine. Guide Size: 13 10 23L. Material: Stainless Steel.
Buy It Now
Free Shipping Condition: New Location: China Fitting Model:EDM Drill Machine. Guide Size: 13 10 23L. Material: Stainless Steel.
Buy It Now
Free Shipping Condition: New Location: China Wire EDM Sparks S604 3086340 Guide Fixed Skateboard CNC Fit For Sodick Machine AQ360/A500/AQ325C. Product number: S604. Applicable models: Fit For Sodick ... moremachine DWC-AQ360, AQ500, AQ325C.
Buy It Now
$11.60 Shipping Condition: Used Location: Lena, United States You are buying a Used System 3R 52mm Electrode Holder.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States Model: 3080053. For Sodick OEM EDM. Upper Split. Type: Split Guide.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States Model: 3080998. For Sodick Wire EDM Machines. Type: Lower Diamond Guide.
Buy It Now
Condition: For parts or not working Location: Oxnard, United States SODICK L-CUT WIRE CHOPPER(?). WITH OM 5IK40RGN-C MOTOR FROM SODICK AQ325L WIRE-CUT EDM. REF: SODICK AQ325L EDM,04/2023.
Buy It Now
$16.45 Shipping Condition: New Location: Broadview Heights, United States OEM 3051534. SODICK URETHANE ROLLER 100 X 10 X 22mm. WE INVENTORY A VARIETY OF SODICK ROLLERS INCLUDING. WS417 100 X 19 X 20 OEM 3054678.
Buy It Now
$9.99 Shipping Condition: New Location: China E061 SANLU Spanner Drill Chuck For EDM Drilling Machines. EDM Drill 0.100-3.00 mm. (EDM Pipe guide for Janpan drilling machine, Taiwan drilling machine). ... moreEDM Drilling Ceramic Pipe Guide, Ruby Guide, Copper / Brass Electrode Tube is available.
Buy It Now
Free Shipping Condition: New Location: China Modle：S412 S413 S416 S417.
Buy It Now
$9.99 Shipping Condition: New Location: China
Buy It Now
$16.99 Shipping Condition: Used Location: Leander, United States SYSTEM 3R PRECISION MINI EDM CHUCK.
Buy It Now
$9.99 Shipping Condition: New Location: China Fitting Model: EDM Drill Machine. Material: Stainless. Guide Size: 13 10 23L.
Buy It Now
Free Shipping Condition: New – Open box Location: Rochester, United States Model: 3081674. Type: Lower Flush Nozzle. Condition: New (Open Box).
Buy It Now
Free Shipping Condition: New Location: China Applicable: Electrical Dischar ge Machine. Size: 4.8 20 40mm. It would also help you on your decision.
Buy It Now
$21.57 Shipping Condition: Used Location: Johnson City, United States Sodick NC-2 Control 7 pin connection Excellent Condition Questions? Call Robert at 607-259-5615 I do combine shipping 51-A
Buy It Now
$50.23 Shipping Condition: New Location: Broadview Heights, United States PREMIUM EDM HARD BRASS WIRE. NOT 11 LB. TENSILE STRENGTH 950 N/mm.
Buy It Now
$7.00 Shipping Condition: New Location: Broadview Heights, United States 6mm SODICK UPPER NOZZLE G4.
Buy It Now
$19.99 Shipping Condition: Used Location: Hopkins, United States Type Cat35 CNC Tool Holder includes ruler type mount. These are becoming harder and harder to find. The owner retired. (3) SNT-12P 3R. make Supersized ... moreseem small. We want you to feel comfortable buying from us.
Buy It Now
$4.99 Shipping Condition: New Location: China E061 SANLU Spanner Drill Chuck For EDM Drilling Machines. EDM Drill 0.100-3.00 mm. (EDM Pipe guide for Janpan drilling machine, Taiwan drilling machine). ... moreEDM Drilling Ceramic Pipe Guide, Ruby Guide, Copper / Brass Electrode Tube is available.
Buy It Now
Free Shipping Condition: Used Location: Naperville, United States VERY GOOD CONDITION.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$5.75 Shipping Condition: New Location: Broadview Heights, United States OEM 3081675. 10mm SODICK FLUSH CUP.
Buy It Now
Free Shipping Condition: Used Location: Naperville, United States
Buy It Now
$55.00 Shipping Condition: New Location: Solon, United States Fits all major Wire EDM machines, Such as. Hard brass wire tensile strength of 932 N/mm2. Made with a CuZn40 (60% copper, 40% zinc) brass alloy.
Buy It Now
Free Shipping Condition: Used Location: Rochester, United States Type: CNC Wire EDM. Model: 3081017 0200727.
Buy It Now
Free Shipping Condition: New Location: Prattsville, United States Sodick Inc. 1 Sodick Inc.
Buy It Now
Free Shipping Condition: New Location: China E061 SANLU Spanner Drill Chuck For EDM Drilling Machines. EDM Drill 0.100-3.00 mm. (EDM Pipe guide for Janpan drilling machine, Taiwan drilling machine). ... moreEDM Drilling Ceramic Pipe Guide, Ruby Guide, Copper / Brass Electrode Tube is available.
Buy It Now
Free Shipping Condition: New Location: China Fitting Model:EDM Drill Machine. Guide Size: 13 10 23L. Material: Stainless Steel. Before you open a case.
Buy It Now
Free Shipping Condition: New Location: China Sodick water level switch. Suitable for slow wire. There are four wires inside.
|
|
|
|
Fine Sodick Ram Type CNC EDM A5C-R (ATC)
Fine Sodick Ram Type CNC EDM A5C-R(ATC) Fine Sodick Ram Type CNC EDM Ref.27-92 Model No. A5C-R(ATC) Serial No. SA5C-332 New 1985 155 AMP Capacity Inside Tank Dimensions: 35" x 27" x 15" Deep Work Table Area: 27.5" x 19.625" X-Axis Travel: 18.1" Y-Axis Travel: 15.3" Z-Axis Travel: 10.23" Distance Between Elecrode Mounting Surface and Table Top: 14.37" 24.21" C-Axis Minimum Angle Divisions: 64.800 Div(20" C-Axis Motor: Pulse Motor C-Axis Holding Torque: 80 Kgcm R-Axis Rotating Speed: 200- 1.700 RPM R-Axis Motor: DC Motor R-Axis Rated Torque: 23 Kgcm Number of Positions in ATC: 16 Type of Tool Holder: NST#35 Maximum Weight of Electrode: 22 Lbs. Length of Electrode Plus Holder: 7.874" Maximum Weight of Workpiece: 2.200 Lbs. Dielectric Tank Capacity: 184 Gallons Recommended Floor Space: ... more140" x 157" Approximate Shipping Dimensions: 104" x 87" x 98" High Equipped With: Sodick Q Command Programming Sodick Mark VII CNC Control Dielectric Fluid System CRT and Keyboard Misc. Tool Holders Fire Extinguisher Manuals Approximate Net Weight: 7.100 Lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for
|
|
|
Sodick NC-2 Control
Sodick NC-2 Control 7 pin connection Excellent Condition Questions? Call Robert at 607-259-5615 I do combine shipping 51-A
|
|
|
CNC WIRE EDM MACHINE SODICK A 530D CHILLER 1,100# 34"X26"X10" CAPACITY WIRE THD
WE REGULARLY LIST UP TO 5 OR MORE LISTINGS PER WEEK. WE BROKER THE MAJORITY OF MACHINES LISTED WHICH ALLOWS US TO OFFER OUR CUSTOMERS A LOWER PURCHASE PRICE. ADDITIONALLY THE MACHINES WE OFFER ARE ALWAYS UNDER POWER FOR INSPECTION. WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or"MAKE YOUR BEST OFFER" ON A CNC SODICK A 530D WIRE EDM MACHINE KNOWN TO BE IN A"VERY GOOD OPERATING CONDITION and with the following approximate specifications: Approximate Specifications: Normal 0 false false false EN-US X-NONE X-NONE Work-Table Travels: X Axis Travel. 19.6" Y Axis Travel. 12.5" Z AxisTravel. 10.6" Taper Angle. ± 10° at 3.93” thickness Wire Diameter. 0.004"0.012" Wire Feed Speed(Max) 9.84”s Maximum Work Piece Size. 35.4” x 23.6” x 10.6” Automatic ... moreWire Threading. YES Submerged. YES Maximum submersed cutting. 7.0” Maximum Work Piece Weight. 1100 Pounds Weight of Machine.3.960 Pounds Equipped with Chiller Normal 0 false false false EN-US X-NONE X-NONE Mfg Date: 1995 Location: CANADA Can be inspected under power Purchase includes loading This CNC SODICK A 530D WIRE EDM MACHINE is known to be in a"Very Good Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee(freight prepaid) if item is not as listed. For items shipped by truck contact any or all of the following for reasonable quotations: Chaun at Next Level Logistics 1-612-237-6843(Excellent Service) We additionally
|
|
|
SODICK A4R DIE SINKER 3R EDM / WITH FINE SODICK MARK XI CONTROL. 30 AMPS
Up for Sale! SODICK A4R DIE SINKER 3R EDM/ WITH FINE SODICK MARK XI CONTROL. 30 AMPS This item is used and has been tested to be in good working condition. This product can be previewed at our facility. CALL. TEXT OR EMAIL WITH QUESTIONS. SE HABLA ESPAÑOL. OCMACHINERY AT GMAIL COM 714 658 5390 We can help with freight and local delivery. FREE LOADING IN ALL PURCHASES
|
|
|
Sodick UV Drive-A UV 1 GA2575 EDM Board
Sodick UV Drive-A UV 1 GA2575 EDM Board Sodick UV Drive-A. UV 1. Drive. GA2575. SanKen. Janome. SI-7200GC. This item was pulled from a working environment. Insurance is included in the handling fee. When purchasing an item requiring freight shipping contact us for the freight cost before paying for the item. If the buyer requests to have a transaction canceled a 15% restocking fee will be charged. Once the item is purchased the buyer is responsible for the item cost and all shipping charges. Visit my Ebay Store at. Www.davesindustrialsurplus.com All items are for sale locally so we reserve the right to end any item. Shipping Items shipped within 3 business days after cleared payment has been received. We reserve the right to ship by the carrier of our choice. Items shipped UPS will be covered if under $100. Larger items will be shipped via ... morefreight. Email us for quote. A $20.00 pallet fee will be included with your quote. INTERNATIONAL OVERSIZED- For oversized international shipments. Email us at davesindustrialsurplus@gmail.com for quote prior to bidding. Customer Service Items have been tested when possible. If item does not function as described call 419-445-1111 for an RMA(Return Merchandise Authorization) If you have questions or concerns contact our office at 419-445-1111 Mon-Fri 8:00AM- 4:00PM EST or Call Dave at 419-551-7874 from 4:00PM- 8:00PM EST Mon- Fri and from 9AM- 8:00PM EST on Sat& Sun, Product Use and Suitability Many states and localities have codes and regulations governing sales. Construction, installation and/or use of products for certain purposes, which vary from place to place. While Dave's Industrial Surplus attempts to assure that the products it sells comply with such codes, it cannot guarantee compliance, and cannot be responsible for product installation or use. Before purchase and use of a product, please review the manufacturer’s specifications and instructions, and national and local codes and regulations, to ensure compliance with specific requirements. Warranty Disclaim
|
|
|
Sodick BF 250 wire edm Parts
For action 2 Yaskawa Servo Packs CPCR-01-SD1A 1 newly rebuilt by NC Servo technology in Westland MI cost was 1500.00 also are all the electrical boards/CPU/ I/O/ mother board/Total of 6 Boards From A Sodick BF 250 that developed a issue with an axis motor and was scraped machine did boot up but gave heat stop alarm Boards should be tested items are AS IS all items are in sealed plastic would like to sell all items as a package DEAL PLEASE!
|
|
|
SODICK EDM MODEL MARK A7C RAM TYPE DIE SINKER
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! SODICK EDM MODEL MARK A7C RAM TYPE DIE SINKER, Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album SODICK EDM MODEL MARK A7C SN:560036 POWER AC 200/220V 50-60HZ Contact Mark for inspection: 818 429.5114 Items ship upon payment in full. Sales Tax will be collected on all California buyers. Unless otherwise specified by Seller. All Machinery is sold as-is with no warranties expressed or implied by seller. Inspection of the machinery may be arranged with advanced notice. Please feel free to contact me regarding this sale. Thank ... moreyou, Mark Payment, California Sales Tax applies. All items sold as is with no warranties expressed or implied unless otherwise specified. Call Mark at 818.4295114 if you have any questions or special requests. I accept the following forms of payment: PayPal FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
3R systems mini block set for Charmilles Elox Agie Sodick EDM etc.
BOXED ITEM You Are Bidding on a preowned 3R-314.2 check ruler 1445.00 3r-3.321-2 indicating spindle 1785.00 3R-321.46 mini block 2225.00 3R-321.2 manual chuck for taper 4x90 degrees 1745.00 3R-321.5 mini chuck direct mount to EDM 1760.00 3R-310EE x 2 electro holder 210.00 3R-322 25s 50E 100 50S set 400.00 3R 405.11e 3R 605-2e 605-2rs 605-1e draw bars 400.00 ready to work for you! Buy used and save. Item is ready to use. Any shop or machinist thinking about buying a new unit will love this sweet deal. You will not only make money with this set up but you will save big over a new purchase. A bargain compare to new price. Description info from mfg for reference. Manual chuck 3R-321.5 Hydraulic chuck for mounting on machine spindle with 3R-A3620. Fixed index positions 4x90°• Flushing connection Manual lathe chuck 3R-321.2-4x90° Hydraulic ... morechuck with set screws. For mounting on a lathe taper. Fixed index positions 4x90° Mini Block 3R-321.46 Manual hydraulic chuck for vertical or horizontal mounting on the machine table. Fixed index positions 4x90° Check ruler 3R-314.2 For setting angular positions. Measuring length 96 mm Indicating spindle 3R-3.321-2 For measuring center holes. Dial indicator required. MFG Specifications of a new unit for reference only! cash.Checks,money orders, PayPal Shipping paid by buyer. See calculator or flat rate for price. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees will apply. Domestic handling time Will usually ship within 5 business days of receiving cleared payment. Shipping insurance Optional(based on location and shipping service) Sales tax Seller charges sales tax for items shipped to: IL(8.750% Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Any Flat rate shipping price listed is to the lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make conta
|
|
|
Wire EDM Sodick Mark 25 Controll Manuals
Two manuals one MARK 25 CONTROL Wire EDM Machine operation training The other A SERIES With Mark 25 power supply Machining Condition Table inch These are used and dirty but all the pages are there they are not torn are stuck together. Please look at the pictures and ask any questions Posted with
|
|
|
Wire Edm Sodick Parts And Software
Sodick wire EDM parts Rubber gaskets New fuses Nozzles springs for the seals Grease for the tank Plastic wipers for the back of the tank O rings Software Impact new in case never opened Sodick Mark 25 system software Version 4.00 H This software is expensive through Sodick And a disk given to you at Sodick training classes with toy programs on it Please look at the pictures and ask any questions Posted with
|
|
|
Charmilles EDM tapping head Agie Elox Sodick Excello Cincinnati Chevalier Kent
This is a used Charmilles EDM tapping head complete and in orginal condtion with everything that came with it. It is in very good to excellent condtion. I bought this with the intention of adapting it to my Elox but never did. I have since closed my shop and have no need of it. Thanks for looking.
|
|
|
NICE SODICK MODEL A280L WIRE EDM MACHINE WITH FINE MARK EXEDW CONTROL LOOK
BEAUTIFUL RUNNING CONDITION UP TO 3 WEEKS AGO WHEN THE OWNER TOOK SICK AND CAN'T RETURN TO WORK IN THE FUTURE. HIS BROTHER CONTACTED ME AND ASKED IF I COULD SELL THIS MACHINE FOR HIM AND I AGGREED. I AM NOT A WIRE EDM SPECIALEST BY ANY MEANS SO ASK QUESTIONS AND I WILL TRY MY BEST TO ANSWER THEM FOR YOU. ITS A SODICK MODEL A-280-L WIRE EDM MACHINE WITH A FINE SODICK MARK EX-EDW CONTROL. COMES WITH EVERYTHING YOU SEE IN THE PHOTOS. MACHINE NUMBER 041. COMPUTER AND KEYBOARDS-WATER RESESTIVITY TANK-CHILLER-FLOPPY DISCS AND PARTS AND OPERATING MANUALS. THE POWER SAYS ITS 220 3 PHASE WITH 30 AMP BREAKERS. I ALSO NOTICED ITS GOT A VERTICAL DRO SCALE ON THE RAM. OTHER THAN WHAT I HAVE SAID THIS MACHINE WAS RUNNING 3 WEEKS AGO AND IT WAS DELIVERED TO ME BY THE RIGGERS THIS MORNING. WE WILL HAVE TO TALK ABOUT SHIPPING THIS COMPLETE SET UP AS IT ... moreWILL HAVE TO BE COMPLETLY CUSTOM SKIDDED AND BOXED IF NEEDED AT AN ADDITIONAL COST. WE ARE OPEN TO OFFERS AND I WILL JUST PASS THEM ON TO THE BROTHER AND FAMILY. EMAIL OR CALL WITH QUESTIONS AND LOADING NEVER A CHARGE. THANKS KENNY RUMFORD SUPPLY& MACHINERY COMPANY INC. 263 PINE STREET SEEKONK.MA. 02771 TEL# 1-508-639-5199 SERVING TOOL AND SHOPS FOR 55 YEARS
|
|
|
Sodick A320D Wire EDM w~Chiller Complete 5000.00 Price Reduction!!!
SODICK A320D EDM MACHINE WITH CHILLER& TANKS NEW: 1994 SPECIFICATIONS: X AXIS TRAVEL.12.59" Y AXIS TRAVEL.7.88" Z AXIS.6.88" AUXILLARY AXIS.U&V 1.96" X1.96" HEIGHT FLOOR TO TABLE.35.83" WIRE TENSION. 44-6.16 WIRE FEED RATE MAXIMUM.9.8" WIRE DIA. 0004- 012 OVERALL DIM- 46"X44X"71" 2500LB SHIP WEIGHT EQUIPPED WITH SODICK MARKEX21 CNC CONTROLLER WITH COLOR CRT SCREEN SUBMERGED CUTTING CHILLER PACKAGE WITH TANKS ALL MACHINERY IS SOLD AS IS WHERE IS. WE CAN SHIP ANYWHERE IN LOWER 48 AT PREVAILING RATES PLEASE EMAIL OR CALL 508-365-8395 WITH ANY QUESTIONS MACHINE IS READY TO GO
|
|
|
EDM Head Fine Sodick
Up for sale is a EDM Head(Fine Sodick) which is used but condition. The pictures of the original item are attached for your reference. should you need any further clarifications. Please feel free to contact us. Thanks,
|
|
|
Sodick EDM AC3R Mark VII
Sodick EDM AC3R Mark VII. Machine is sold as is. Email with any questions. Available for on site inspection. Buyer pays freight and rigging cost.
|
|
|
Sodick A320d Upper and Lower heads
Upper and lower heads for a A320d with AWT wire EDM. Both heads have had flush caps. Carbides, o-rings and guides(010) replaced about a years ago. Carbides only have one wear mark. These would be great for spare parts or a replacement. buyer pays actual shipping, I will not overcharge for shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144206f64a3-0xf7-
|
|
|
SODICK A85 CNC Sinker EDM Electrical Discharge Machine
SODICK Model A85 CNC Die Sinker EDM Electrical Discharge Machine. Serial#076, New 1996 Stock#30739 Preliminary Specifications: Table Size– 31-1/2” x 63” Travels– 34” x 20” x 18” Tank Inside Dimensions– 72” x 50” x 24” Max Electrode Weight– 660 Lbs. Max Workpiece Weight– 7700 Lbs. Machine Weight. Approx– 22,000 Lbs. Equipped with: Mark 22 CNC Control System 3R Clamping Chuck Work Lights Available Manuals PRICE: $39.900.00 USD FOB TRUCK DAYTON OH. It was surplus to the needs of a large local company. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire ... moretransfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
|
|
|
System 3R Macro Slotted Holder 3R-651.2-LS 54mm Set of 5 EDM Mitsubishi Sodick
You are bidding on a SET of 5 USED System 3R Slotted Macro Holder Part# 3R-651.2-LS Call 262-719-0232 or email with questions.
|
|
|
BRIDGEPORT MCWILLIAMS 812 (SODICK) MK IX WIRE EDM
Up for auction is a 1987 Bridgeport wire EDM. McWilliams Sales and Service brought these Sodick EDM's to market with the Bridgeport branding. It is an 812 model. Serial number 162, with the Sodick mark ix control. It was fully refurbished and running well when removed from service(August 2013) Still sitting in same spot, just disconnected power. Lots of new parts(including new keyboard) were installed, and all parts were inspected, cleaned, and reinstalled. Dielectric tank and pumps, chiller, and Ebbco filter are rebuilt and included. Control has the remote pendant(hard to find option) All available manuals are included and a brand new roll of wire. You would be hard pressed to find a nicer wire EDM at this price. Over $20,000.00 invested in this machine, no longer needed as business is closed. Ready to make money! If you would like to ... moreinspect prior to auction end please call(256)508-9525. Item is located in Madison, Al and must be picked up locally. Easy removal access for a rigging company. May help load onto your truck or trailer(at my discretion)with forklift. Check my other listings for other metalworking and fabricating equipment.
|
|
|
Sodick A280L Wire EDM Machine (this machine has a special PCD cutting circuit)
Sodick A280L Wire EDM machine. This Sodick Wire EDM is in excellent condition. Is very well maintained, and is very reliable. The machine is setup. Running under power, and fully functional. This machine has a new flat screen monitor(2013) and a new computer(2009) installed. This A280L has a special High Voltage Cutting Circuit installed for cutting PCD( Poly Crystalline Diamond) and similar materials. A toggle switch is located inside that cabinet that enables this special high voltage circuit. We will install table locks. Pack and shrink wrap machine, and load it on customers truck(or we can arrange freight) Thanks for your interest. MAKE: SODICK MDL: A280L S/N: 010 YR: 1989 X-TRAVEL: 12" Y-TRAVEL: 8" Z-TRAVEL: 6.7" MAX. WORKPIECE SIZE: 15.7" X 11.8" X 6.9" MAX. WORKPIECE WEIGHT: 352 LBS U-V STROKE: 1.96" ... moreX 1.96" TAPER ANGLE: +/ 15 DEGREES CONROL: MK EX 25 AMPS MANUFACTURER/S RATED CUTTING SPEED 16/18 SQ"HR MACHINE DIM: 63"L. X 45"W, X 71"H APPROX WEIGHT: 4500 LBS.
|
|
|
(34) SYSTEM 3R 20MM SHANKS EDM TOOLING Albrecht mini electrode holders Sodick
34) SYSTEM 3R 20MM SHANKS EDM TOOLING Albrecht mini electrode holders Sodick This tool comes from a aeronotical CNC shop that closed near Minneapolis. They were running Haas. Makino, Deckel, Maho, Fadal, Sodick, Mitsubishi and other machines. I have other EDM tooling I will be selling. Check out my other auctions and we will happily combine shipping. If you need multiples of what we have listed, ask! We probabily have more. Qty: 34 Make: 3R and other 20MM holders Shank: 20MM Includes custom tools including an Albrecht 0-1/8" keyless chuck and others. See Photos Some of these are marked 3R others are not. These are not homemade holders. These are the real deal. Set screws and holders included. I have a regular store so if you are interested place a bid or buy it now. I regularly remove items that have sold outside of eBay. 3-1414-7 Buy ... morewith confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
CLEAN 100+ SYSTEM 3R 20MM SHANKS EDM TOOLING mini electrode holders Sodick block
CLEAN 100+ SYSTEM 3R 20MM SHANKS EDM TOOLING mini electrode holders Sodick block This tool comes from a aeronotical CNC shop that closed near Minneapolis. They were running Haas. Makino, Deckel, Maho, Fadal, Sodick, Mitsubishi and other machines. I have other EDM tooling I will be selling. Check out my other auctions and we will happily combine shipping. If you need multiples of what we have listed, ask! We probabily have more. Qty: 100+ Make: 3R and other 20MM holders Shank: 20MM Some of these are marked 3R most are not. These are not homemade holders. These are the real deal. Set screws and holders included. I have a regular store so if you are interested place a bid or buy it now. I regularly remove items that have sold outside of eBay. 3-1414-6 Buy with confidence. There is a 14 day return privilege if the item arrives not as described ... moreor non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know.
|
|
|
3R Indicator spindle #3R-3.321-2 Sodick Charmilles Elox Agie Excello Chevalier
This is a 3R indicating spindle. I have listed it as used but I am not shure if it has ever been used. It is in like new condtion. It comes in the orginal wooden case with a hex key. Please look close and ask and questions you may have. No returns. Thanks for looking.
|
|
|
3R Stainless Steel Rotating Spindle #1.6S-RS EDM Fanuc Sodick Agie Charmilles
This is a used System 3R rotating spindle#1.6S-RS. It is the stainless steel model for use on Wire EDM equipment. It is in good useable condtion. However there is small pitting on it in various places. I have no idea what it was exposed to that caused that. It was like that when I got it but does not effect the accuracy or usefulness. I used this on my Wire EDM machine to profile and contour the tips of small pins and it did an excellent job. I have since closed my shop and nolonger have need of it. Included is the electronic control for the drive motor and an air pressure regulator. The motor and spindle housing are pressurized to keep water out. To inspect and/or pick up in persion is welcome. Please look close and ask any questions you may have, no returns. Thanks for looking.
|
|
|
Sodick VZ500L LN2W Wire EDM 2013
Machine is being sold due to the death of the owner. Serious inquiries only. Machine was only used for several months. It only has 144 hrs on it. It is in"like new" condition. It was manufactured January 2013 and installed July 2013. For more information contact Glenn Osborne at 513-539-2700 or email me at glenn@gwmachinery.com Machine is in"as is. Where is" condition. No warranties are implied. Specifications X-Axis Travel 19.7” 500 mm) Y-Axis Travel 13.8” 350 mm) Z-Axis Travel 9.8” 250 mm) U-Axis Travel 3.1” 80 mm) V-Axis Travel 3.1” 80 mm) Wire Diameter Range(min. ~ max. 0.004 ~ 0.012” 0.10 ~ 0.30 mm) Work Tank Dimensions(W x D) 39.0 x 30.0” 990 x 750 mm) Maximum Workpiece Weight 1.874 lbs(850 kg) Distance From Floor to Table Top 37.0” 930 mm) Machine Tool Dimensions 91.0 x 102.0 x 80.0” 2.300 x 2,590 x 2,040 mm) Required ... moreFloor Space(W x D) 118.0 x 130.0” 3.000 x 3,300 mm) Machine Weight 6.490 lbs(2,950 kg)
|
|
|
SODICK A280L WIRE-TYPE EDM, MARK EX" 4-AXIS CNC, SUBMERGED CUTTING
I purchased this machine for a job that never came to be. I did an inspection on this machine running before I purchased it and it was a good running machine. Since the job that this machine was purchased for never came to be this machine has been sitting in my shop and I cannot for see any work coming my way that I could use it for. Machine is currently NOT hooked up to power. This is why I am selling at NO RESERVE I am selling this machine in"AS IS" condition beings It is not hooked to power for inspection. I will Load this machine to winning bidder's shipper/trucking company of choice FREE OF CHARGE. I will crate. Secure, prepare this machine FREE OF CHARGE. I do not have manuals with this machine. Manuals are available online or From SODICK. Here are some specs on this machine I got from SODICK. MAKE: SODICK MDL: A280L YR: ... more1994 X-AXIS TRAVEL: 12″ Y-AXIS TRAVEL: 7.800″ Z-AXIS TRAVEL: 6.900″ MAX. WORKPIECE SIZE: 15.7″ X 11.8″ X 6.9″ MAX. WORKPIECE WEIGHT: 352 LBS U-V STROKE: 1.96″ X 1.96″ TAPER ANGLE: +/ 15 DEGREES CONTROL: SODICK fine MARK EX edw RATED CUTTING SPEED: 16-18 SQ”HR MACHINE DIM: 63″L. X 45″W, X 71″H APPROX WEIGHT: 4500 LBS.
|
|
|
EPSON PC-486SE PC486SE2 for CNC and Sodick EDM, Japanese Engineer Refurbished
This is EPSON PC-486SE for CNC and Sodick EDM CNC. It has 3.5inch FDDx2. HDD 200MB, RAM1.6MB, Expansion Slot x2 and no options. It is only a main part of PC. Monitor, Keyboard, Mouse and Software are not contained. It is Refurbished. Tested and a Calendar Battery has been exchanged for now one. It is in Very Good work condition. As for details. Please refer to the sample images. Shipping Fee are Free shipping for continental USA, US $97.50 for Asia, US $133.75 for Canada. Mexico& Oceania, US $153.75 for Europe. US $263.75 for Worldwide. Import duties. Taxes and VAT are not included in the item price. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We will send it out within 5 business days by EMS(Express Mail ... moreService. With Tracking No. and insurance) after clearly payment received. The delivery time for USA by EMS is usually 5-10 business days. It depends on destination and other factors. It may takes up to 23 business days. The Tracking No. will be provided after a shipment and you can track shipping. If you don't receive the item after 23 business days, please contact us, we will investigate and solve the delivery problem. NOTICE- We and EMS are not responsible for your country's customs clearing. If this article can't pass the customs. You have to return it to us at your expense. And then we will refund your money less shipping and any other costs. Before you bid. We want to let you know that we accept PayPal Only. Your payment will be covered by eBay Buyer Protection. We ship to your PayPal address. Please make sure your PayPal address is correct before your bid. Please pay for it as soon as possible after you win the bid or within 5 business days of auction closing. Money back is our Warranty. A refund will be issued after return of the original item. You will be responsible for all return shipping fees. No returns except if defective. If the item that you have re
|
|
|
Sodick jumbo feeder for wire EDM
Up for sale is a Sodick Jumbo feeder for a wire EDM. It is in very good used condition. But being sold as Is. We are clearing out items that are surplus to our business. We will put on a pallet and load for free, buyer to pay all shipping costs.
|
|
|
Sodick MOLD MAKER 5 EDM Machine
Price includes the following accessories. If any of the accessories are not needed for your implementation you may choose to have one or more items removed for a reduced cost. Contact us for more details: 3R C-Axis Chiller 3R C-Axis Chuck 16ATC 3R Macro Tool Changer 3R Tooling Dielectric Fluid Filters 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-1482a57e885-0xed-
|
|
|
SODICK AQ35L CNC SINKER EDM WITH ROBOTIC LOADER
YEAR NEW. 2003 WORK TABLE. 23.55" X 15.67" WORK TANK DIMS. 30" X 22" X 13" TRAVELS(X) 14" Y) 10" Z) 10" MACHINE WEIGHT. 11.000 LBS MACHINE SIZE. 69" X 101" X 114" H EQUIPPED WITH: SODICK LN1 CNC CONTROL LINEAR MOTORS(NO BALLSCREWS) AUTO DROP TANK EROWA 120 POSITION ROBOTIC LOADER CHILLER TRANSFORMER
|
|
|
Sodick Wire EDM, Model A325, Auto Wire Threading, Mark 25 CNC Control, 1999
Sodick Wire EDM Machine Sodick Wire EDM Machine MODEL 325A NEW 1999 14.500 hours Auto Wire Threading Wire Chopper Mark 25 CNC control Catalog spec's This EDM is for sale by a local one man shop. He bought it new in 1998 and took delivery in 1999. The last time the machine was used was in January. The disk's may need to be reloaded. No issues with the machine Includes disks and manuals X-AXIS TRAVEL. 13.7" Y-AXIS TRAVEL. 9.8" Z-AXIS TRAVEL. 8.6" AUXILIARY TABLE TRAVEL. 3.1" x 3.1" STANDARD TAPER. +/ 30 DEG. 1.18" THICK MAX. HEIGHT OF WORK PIECE. 8.6" MAX. WORK PIECE WEIGHT: 990 LBS. WORK TABLE SIZE. 23.6" Wide x 15.7" Deep WORK TANK INNER DIMENSIONS. 35.2" Wide x 25.5" Deep RAPID FEED RATE. 79" IPM(inch per minute) WIRE DIAMETER: 0.004" 0.012" MAX. WIRE-FEED RATE: ... more0.8" 9.8"SEC APPROX. MACHINE WEIGHT. 6.600 LBS. APPROX. DIMENSIONS. 65" x 84" x 82" TALL DIELECTRIC TANK CAPACITY. 158 GALLONS TANK DIMENSIONS. 31.5" x 80.4" x 65" TALL Located in Bridgeport. CT A rigger is required to load onto a truck. Approx. $800-$1000
|
|
|
(1) Used Sodick Model MOLDMAKER 3, CNC Sinker EDM, New 1993
1) Used Sodick Model MOLDMAKER 3. CNC Sinker EDM, New 1993 Specifications: Work Table Size 23.6" x 11.8" Work Tank Dimensions 35.4" x 20" x 12.5" Work Tank Fluid Level 5.1” Min to 11” Max X Axis Travel 11.8" Y Axis Travel 7.9" Z Axis Travel 9.8" Maximum Workpiece Weight 1.210 lbs. Maximum Weight of Electrode 110 Lbs Dimension of Electrode Holder 3.9” Distance Between Electrode Mounting Surface and Table 11.8” to 21.6” Power Supply Amps 40 Amps Machine Weight 3.520 Lbs Machine Dimensions 50.4” W x 46.7” D x 83.1” H Equipped With: Fine Sodick Mark TX EDM Control RS 232 Port Interface(2) 3.5" Floppy Disk Drive 3R Head NOTE: Computer need repair. Specifications and Equipment are Preliminary. Subject to Buyer Verification. Please contact us for shipping options. Our Inventory# Tfori 12207 Information ... moreis Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please contact us for a shipping quote. Also please wait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-148fc2910a4-0x105-
|
|
|
SODICK A 350 WIRE CNE EDM MACHINE AUTOMATIC THREADING, CHILLER, JUST REFEBISHED
WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or"MAKE YOUR BEST OFFER" ON A SODICK A 350W CNC WIRE EDM MACHINE. AUTOMATIC THREADING. CHILLER. SUBMERGED CUTTING, MARK 21 CNC CONTROLLER, JUST REFERBISHED and with the following approximate specifications: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 SPECIFICATIONS: Table Travels X Axis: 13.7" Y Axis: 9.8" Z Axis: 8.6" Taper Angle: 0-15° Maximum Workpiece Size: 21.6" x 15.7" x 8.3" Maximum Workpiece Weight: 550 lbs EQUIPPED WITH: Chiller Automatic Wire Threading Submerged Cutting Mark 21 Control Unit Mfg Date: 1991 LOCATION: MONTREAL. CANADA UNDER POWER FOR INSPECTION This SODICK A 350W CNC WIRE ... moreEDM MACHINE WITH AUTOMATIC THREADING appears to be in a"VERY GOOD Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee(freight prepaid) if item is not as listed. For items shipped by truck contact any or all of the following for reasonable quotations: Chaun at Next Level Logistics 1-612-237-6843(Excellent Service) ANY LISTED ITEMS DO NOT INCLUDE RIGGING NOR ANY SHIPPING UNLESS NOTED! We additionally have local riggers that can give reasonable quotations as well as quoting containerizing items for overseas shipments. Most items we list are offered locally and could be sold previous to end of store listing. We gladly accept Pay Pal in payment for items $150.00 or UNDER ONLY. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal. Company, certified, cashiers checks drawn on recognizable U. S. Banks and accept bank wire transfers. Once payment is received and clears(approx 5 working days for out of state checks. Ect.due to Ho
|
|
|
EDM SINKER Sodick A3R-C, Mark 5, 1985
1985 EDM extremely technologically advanced for its' time. Full 4 axis CNC control. Excellent shape. Have all manuals. Fully operational. Upgraded EDM department. For any additional questions please call Terry Daum at(949) 369-7949. If you would like a demonstration or any observation please contact the seller and this can be arranged. SPECIFICATIONS 1) Main Body of Machine a. Bench Size(W x D) 600 x 300 mm b. Machining Tank ID(WxDxH) 750x470x320 mm c. Dielectric Level Control Range(above table top) 130-280 mm d. Machining Tank Capacity: 100 L e. Maximum Electrode Weight: 25(10 when ATC is used) Kg*Note: maximum electrode weight varies according to the discharge area and intended surface finish f. Maximum Workpiece Weight: 400 kg g. Distance between electrode mounting surface and table surface: 275-525 mm h. Distance from floor to table ... moretop: 890 mm i. Spindle servo system: DC motor servo system j. Machined Depth measuring system: automatic digital reading system k. Holder type: SNT Series l. c-axis motor: pulse motor m. r-axis motor: DC motor n. r-axis speed: 200-1700 rpm o. r-axis rated torque(during turning) 23 kg*cm p. c-axis holding torque(during angle indexing) 80 kg*cm q. holder locking system: pullstud traction r. minimum c-axis angle indexing: 20 sec. s. external power(air pressure) 5 kg/cm^2 t. current capacity: within 30 A 2) Automatic Tool Changer(ATC) a. Number of Electrodes: 16 b. Electrode selection system: address designation c. Distance between tool pots: 3" d. electrode length + holder: Max 200 mm e. Max. electrode weight: 10 kg 3) Service Tank a. Tank Capacity: 300 L b. Delivery Rate: 40 L/min c. Filtration System: Paper Filter d. Outside Dimensions(WxDxH) 1270x730x1120 mm e. Weight: 150 kg(dry 4) NC Power Unit"Mark V" a. Outside Dimensions(WxDxH) 26" x 58" x 72" b. Weight 2400 lbs 5) Electric Capacity a. Service tank: Three-phase. 200/220 V, 50/60 Hz Feed Pump: 0.75 KW b. NC power unit"Mark V" Three-phase. 200/220 V, 50/60 Hz, 4.0 KVA
|
|
|
Sodick Inova 30NC type EDM machine, Sodick8107 Control, Sodick 7130 power supply
Sodick Inova 30 NC ram type EDM machine. Sodick8107 Control, Sodick 7130 power supply. Serial#S30-149, 10" x 15" Electromagnetic chuck with Min A Tron variable pull.
|
|
|
Sodick Wire EDM Model A530D
Specs: Control: Sodick EX21 Silver CNC Control Max Workpiece Size: 38.9" x 27.5" x 10.2" 7"Submerged) Travels(X.Y,Z) 19.6" x 12.5" x 10.8" UV Travels: 1.96" x 1.96" Max Worpiece Weight: 1100 Lbs(770 Lbs Submerged) Wire Diameter: 004-012" Wire Speed: 9.4 Inches Per Second Wire Feed Speed Taper Cut: +/ 10 Degrees at 3.9" Thick Dielectric Fluid Capacity: 738 Liters Equipped With: Sodick EX21 CNC Control. Automatic Wire Threading, RS232 Port, Remote Pendant Control Unit, Chiller, Upper and Lower Flush, Dielectric System with Filtration, Wire Discharge Bin, Manuals, Parameters, Data Disks, Assorted Wire Guides. Electrics: 200-440 Volt. 3 Phase Via Included Transformer Main Unit Approx Weight: 3960 lbs Main Unit Dimensions(in inches) Length: 64" Width: 64" Height: 83" Additional ... moreComponents: Control and Power Supply: L: 25" W: 48" H: 79" Weight: 500 lbs Transformer: L: 16" W: 20" H: 21" Weight: 350 lbs Dielectric System: L: 84" W: 42" H: 68" Weight: 500 lbs Wire Discharge Bin: L: 21" W: 27" H: 29" Weight: 100 lbs Note- Link for Video SOLD As Is/Where Is: The item being sold is being sold � as is � We will do our best to answer specific questions We usually ship within 3 business days of receipt of cleared payment. Freight costs to be quoted at time of sale if requested and has to be paid prior to pick up. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in transit Offered as is. No warranty or return privilege at this price.
|
|
|
Fine Sodick Mark XI EDW Model A350 for Parts or Repair- NO RESERVE
Fine Sodick Mark XI EDW Model A350 for Parts or Repair- NO RESERVE Some of the wiring needs replacing otherwise in good condition. Buyer is responsible for shipping. We will help load. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
30 AMPS Sodick K1CN EDM HOLE DRILLER, CNC, 4-AXIS CNC, 7.8'X/11.8"Y/11.8"Z/9"W T
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 30 AMPS Sodick K1CN EDM HOLE DRILLER. CNC, 4-AXIS CNC, 7.8'X/11.8"Y/11.8"Z/9"W T Ref# 153250 iammdna XEDMHD SODICK CNC EDM HOLE DRILL/POPPER MODEL: K1CN S/N: 95011404 NEW: 1995 SPECIFICATIONS: ... moreMAX. AMPS: 30 AMPS TABLE SIZE: 15.7" x 17.7" MAX. WORKPIECE WEIGHT: 440 LBS. X-AXIS MOVEMENT: 7.78" Y-AXIS MOVEMENT: 11.81" Z-AXIS MOVEMENT: 11.81" AXIS VERTICAL MOVEMENT(W-AXIS) 9.09” MAX. WORKPIECE DIMS. 15.7” x 17.7” x 11.8” DISTANCE BETWEEN WORK TABLE TOP AND GUIDE HOLDER 0.28” T0 11.81” FLOOR TO TABLE 35.7” ELECTRODE DIAMETERS AVAILABLE: 0.012" 0.12" DIMENSIONS L x W x H: 55”L-R X 39”D" X 75"H WEIGHT: 1.870 LBS. EQUIPPED WITH: SODICK 4-AXIS CNC CONTROL HIGH PRECISION BALL SCREWS SEPARATE FILTRATION SYSTEM. 28” x 16” X 55”H 3/60/220 VOLTS ELECTRICS* SERVICED. CYCLED, TESTED* F.O.B. OUR HARRISON. NJ WAREHOUSE* EXCELLENT CONDITION& APPEARANCE* Machine Location: HARRISON. NJ Click Here For More Sodick Machines Click Here For More EDM's- EDM HOLE DRILLER/ POPPER(s) Questions about this Machine? Call Andy at(800) 873-6224 ext 7600 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bough
|
|
|
SODICK FINE WIRE ELECTRIC DISCHARGE MACHINE EDM MODEL FS-330W W GO-40 CONTROL
SODICK FINE WIRE ELECTRIC DISCHARGE MACHINE EDM MODEL FS-330W W GO-40 CONTROL This is a fixed listing for a Sodick Fine Wire EDM. Model: FS-330W Specifications: Make: Sodick. Type: EDM. Style: Fine Wire. Date: 1985. Control: Sodick GO-40. This is a 3 piece machine. And everything pictured is included. The EDM is exactly as pictured and is fully guaranteed. We will happily load your truck at no charge. Or assist in planning the most economical delivery. Expedited and Next Day Shipping Services: We utilize UPS for all overnight and next day delivery services. If you would like your purchase expedited. Please let us know before 2PM US/EST on the day of purchase. If you would like to have us ship on your UPS account, just provide us with your account number during checkout or give us a call. Special exceptions can be made for customers with FedEx ... moreaccounts if we are notified in a timely fashion. Frieght Shipping: If the auction states"freight" as it's shipping service please contact us prior to bidding for an accurate shipping price. If you purchase an item marked as"freight" we will automatically invoice our lowest commercial shipping rate to your"ship to" location utlizing our network of carriers. If you wish to send your own truck or carrier. Just let us know and we will provide shipping dimensions. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. If the shipping price isn't listed as"calculated" please contact us prior to bidding for an accurate shipping price to your country. The buyer is responsible for their own countries custom and tax fees. We always combine shipping to give you the lowest possible cost. We pride ourselves on our customer service. And we want to make this eBay transaction as enjoyable as possible. If you run into any problems with your order, please let us know so we can do our best to satisfy your purchase. Please feel free to call us between 9:00-5:00 EST Monday-Friday at 800 826
|
|
|
30 Amp Used Sodick CNC EDM Hole Popper, Mdl. K1CN, Sodick 4 Axis CNC Control
Established in 1954. Sterling Machinery is one of America's largest, most well-established national dealers for Fabrication Equipment and Chip Making Machinery. Our vast warehouse contains over 2,000 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to your computer's browser. We sell New and Used Metal Working Machine Tools Dealer. Press Brakes, Shears, Lathes, Mills, Punch Presses, Saws, Grinders, Drills and much more. We also carry a wide variety of tooling at competitive prices. Affordable pricing is available to qualified customers. Whatever your project demands, call us first for competitive pricing and selection. 30 Amp Used Sodick CNC EDM Hole Popper. Mdl. K1CN, Sodick 4 Axis CNC Control, Dielectric Tank, Dual Floppy Disc Drive, 8852*SOLD AS-IS. SPECIAL PRICE NO WARRANTY* ... moreManufacturer: Sodick, Model: Capacity: 30 Amp, Stock: 8852, Category: Edm Machines, Condition: Used Machinery, Max Amps: 30, Work Table Size: 14.96"x14.96" Longitudinal Travel(x) 7.87" Cross Travel(y) 11.81" Spindle Travel(z) 11.81" Veritcal Travel(w) 9.05" Distance Between Table To Guide Holder: 0.39" 9.45" Max. Work Piece Weight: 220lbs. Z Axis Servo: Pulse Motor, Electrode Diameter: 0.01" 0.12" Electrode Length: 11.81" Tank Capacity: 100 Liters, Dimensions(W x D x H) 34"x47"x82" Weight: 1.750lbs. Any questions please feel free to ask. Additional pictures can be provided upon request. Handled and shipped with care. Free local pickup. Free loading on truck without pallet. Palletizing fee may apply. CONTACT US BEFORE YOU BID OR COMMIT TO PURCHASE FOR A FREIGHT QUOTE! FREIGHT VARIES BASED ON DELIVERY ZONE AND WE WILL NEED YOUR ZIP CODE TO GET THE MOST COMPETITIVE RATE FOR YOU! TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Shipping and Handling: Buyers are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure it
|
|
 |