|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Pomona, United States EDM: 40" X 36" X 38". DIELECTRIC TANK: 22" X 33" X 27". HYDRAULIC TANK: 9" X 23" X 17". TANK SIZE: 24" X 16" X 11.5". WORK TABLE: 15" X 9". MAXIMUM DISTANCE ... morePLATEN TO TABLE: 16". SIZE OF RAM PLATEN: 13" X 5".
Buy It Now
Condition: Used Location: Rochester, United States Make: Hansvedt. Machine is not tested. The EDM does not have a data plate that we could locate. Information was gathered from a manual that was included ... morewith the machine that provided model # and specifications.
Buy It Now
$16.00 Shipping Condition: Used Location: Surprise, United States HANSVEDT EDM SM-150B 6YXC63I Board AG1990 c 1/0 Board.
Buy It Now
$15.00 Shipping Condition: Used Location: Surprise, United States HANSVEDT EDM SM-150B Board SRCO 3-542-1169A EDM Board.
Buy It Now
Condition: Used Location: Phoenix, United States
Buy It Now
$12.00 Shipping Condition: Used Location: Phoenix, United States
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 01240040017. Manufacturer: HANSVEDT. Diversion of any products contrary to United States law is prohibited. We reserve the right to ... morecancel any order. Less-Than-Truck (LTL) Freight.
Buy It Now
Free Shipping Condition: Used Location: Champaign, United States
Buy It Now
Free Shipping Condition: Used Location: Champaign, United States HANSVEDT EDM MS-4 I/O Board A4220.
Buy It Now
Condition: For parts or not working Location: Jackson, United States USE/SHELF LIFE. UNIT IS BEING SOLD AS IS.
Buy It Now
Free Shipping Condition: Used Location: Champaign, United States HANSVEDT EDM MS-4 Servo Board A427A A4273.
Buy It Now
Condition: Used Location: Pawtucket, United States Type: CS-1 WORKMAN. Gold Machinery Group. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. We’re ... moreconveniently located on the East Coast between Boston and New York.
Buy It Now
Free Shipping Condition: Used Location: Champaign, United States
Buy It Now
Condition: Used Location: Pawtucket, United States MODEL: MS-I BENCHMAN 201E. Gold Machinery Group. LOW PEAK CURRENT, ARC DURATION (.5 TO 1843 MICROSECONDS). Our visibility and strength in the marketplace ... moreis not accidental, but rather occurs by careful design.
Buy It Now
Condition: Used Location: Lancaster, United States EDM: 40" L-R x 36" F-B x 38" High. Dielectric oil System. Dielectric Tank: 22" L-R x 33" F-B x 27" High. Maple Top Bench. Assembled on Bench: 76" L-R ... morex 48" F-B x 74" High. Ram Travel: 6". Size of Ram Platen: 13" L-R x 5" F-B.
Buy It Now
Condition: Used Location: Harrison, United States WITH SYSTEM 3R "ORBICUT CNC" ORBITOR ACCESSORY. HANSVEDT "CONVENTIONAL" RAM TYPE EDM. SYSTEM 3R "ORBICUT CNC" ORBITOR ACCESSORY. RAM TRAVEL. . MODEL: ... moreCS-1 WORKMAN S/N: AP16936 NEW: 1996.
Buy It Now
$22.59 Shipping Condition: New Location: Irvine, United States Filtration precision5 micron. Orders under 150 lbs. Orders above 150 lbs.
Buy It Now
Condition: Used Location: Cypress, United States No known problems, however sold as is. NC Unit: Hansvedt w/RS-232 Port. Cutting Speed 14 In. The two pallets are 42" X 78" X 48" and 48" X 72" X 63", ... moreapprox. 1100lbs, you may arrange your own freight LTL service or you may also pick up in person.
Buy It Now
Condition: Used Location: Dousman, United States Make: Hansvedt. Model: Leadman 502. USED RAM TYPE EDM. Floor Space Required. Machine Weight. Alternative Machine Tool, LLC. Our loading Max is 10,000 ... morelbs. The machine is located in Dousman, WI (53118).
Buy It Now
Condition: Used Location: United States HANSVEDT PRODUCTIVITY YOU DEMAND: Dependable DC arc sensing avoids damaged parts and electrodes PERFORMANCE YOU EXPECT: Exceptional metal removal rates:1.4 ... morein cu/hr. Graphite to steel* Fast worktank fill and drain rates* Exceptional operation with both graphite and metallic electrodes* Continuous filtration system provides a high flow of clean fluid to the work area EQUIPPED WITH: Model 201E Power Supply* Sony 2-axis DRO's* Rugged. Compact Benchtop Machine Tool* Large Workpiece Capacities- 200 Pounds* Precision Cast Iron XY Table with Turcite® Lined Dovetail Ways* Rigid Cast Iron Quill-Type Ram with 3.375x3.25" Platen to Accept a V-block or Precision Tooling* High-Response DC Servo and Ballscrew Drive* Programmable DC Arc Protection* Programmable Orbiting/Vectoring Head with.400" Travel in U- and V-Axes* High-Flow Dielectric Fluid System Including Reservoir. Pump and 5 Micron Filtration* Flushing Controls for Pressure. Worktank Bypass and Fluid Level* Fluid Level Safety Switch and Transparent Worktank Door
Buy It Now
Condition: For parts or not working Location: Paragon, United States This is a nice used AGIE Model EMT-1. Sinker EDM. It has a 17" x 10" table; 22" x 14" x 9" tank; 9.84" x 6.3" travels; ... more7.87" ram stroke; 30 amp power supply; Agiemat 3 control; Manuals; This machine has a SYSTEM 3R HEAD This machine was part of a large purchase of machines and we have not tested or tried to run it. We are selling it as we received it. It appears to be complete and is a very clean machine. We are offering it far below retail price and selling it as is as described. Loading onto flatbed truck or trailer is free. Buyer pays all shipping costs. Ohio sales tax rules apply. Payment muct be received within 5 days of close of sale. Machine is sold as is.
Buy It Now
Condition: Used Location: Warren, United States Hansvedt Model CS-20. Complete 90 Gal. Dielectric Coolant and Filtration System. DC Ram Travel: 8". DC Ram Capacity (lbs): 75. Ram Platen (W x D): 6.5" ... morex 4". Distance Ram Platen to Table (Max/Min): 20"/12".
Buy It Now
Condition: Used Location: Terre Haute, United States Dialectric tank is 24"L x 16"W x 13" H. Little Scotsman Electrojet machine was working fine prior to moving into storage.
|
|
|
|
Agie Sinker EDM with System 3R Head; Ram Type Mitsubishi Charmille Hansvedt
This is a nice used AGIE Model EMT-1. Sinker EDM. It has a 17" x 10" table; 22" x 14" x 9" tank; 9.84" x 6.3" travels; 7.87" ram stroke; 30 amp power supply; Agiemat 3 control; Manuals; This machine has a SYSTEM 3R HEAD This machine was part of a large purchase of machines and we have not tested or tried to run it. We are selling it as we received it. It appears to be complete and is a very clean machine. We are offering it far below retail price and selling it as is as described. Loading onto flatbed truck or trailer is free. Buyer pays all shipping costs. Ohio sales tax rules apply. Payment muct be received within 5 days of close of sale. Machine is sold as is.
|
|
|
Hansvedt Workman 201, 300 Amp Conventional Ram Type Electrical Discharge Machine
Liberty Machinery Company You are looking at: Used- Hansvedt Workman Model 201. 300 Amp Conventional Ram Type Electrical Discharge Machine* Serial No. AP15924 New- 1996 LMC#31889 SPECIFICATIONS: Positioning Table Travel 6" x 8" Worktable Size 9" x 15" Platen-To-Table Distance 18" Maximum Ram Travel 8" Infeed Display. 1" Dial Indicator.001" div. Platen Size 5.75" x 4" Maximum Electrode Weight 75 Lbs. Maximum Workpiece Weight 200 Lbs. Power Supply: EDM Controls Arc Duration. On-Time, Peak Current. Polarity, Electrode Material: Servo Controls Auto. Manual, Dither, Ram Cycle, Edge-Finder. Servo Speed, Gap Adjust: Maximum Average Current 20 Amp. Arc Duration Range.5 to 1.843 Microseconds Maximum Metal Removal Rate 1.2 Cu.in.Hr. Graphite in Steel. Negative Electrode Dielectric System: Worktank Capacity ... more18 Gallons Reservoir Capacity 40 Gallons Flushing Pressure 0- 50 PSI Vacuum 0- 15 in.Hg. Filtration Replaceable 5 Micron Element Dimensions 82' x 64" x 38" Net Weight 1.400 Lbs. Power Input 105- 125 VAC. 60 Hz, 1 Phase EQUIPPED WITH: Capacitor Mode 20-AMp Booster Module Dielectric Temperature Control Unit Additional Dielectric Filter Micrometer Down-Stop Orbit Stop/Lock Pulse Flush Spray Manifold XY Digital Readout XYZ Programmable Digital Readout Metric Lead Screws and Dials*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up
|
|
|
HANSVEDT LEADMAN SINKER TYPE EDM (Electrical Discharge Machine)
ebay template Hansvedt EDM 1995 MS-2 Leadman PICTURED IN USE Currently running at customer's facility and showing great performance and working ability. The Leadman is a rugged floor-type machine capable of handling medium-to-large molds. It utilizes heavy-duty cast iron construction in the frame. Worktable and ram components to assure maximum rigidity and stability. Turcite-lined vee and flat worktable ways allow large workpieces to be positioned smoothly and accurately. Pin-release handwheels and caliper-type locks prevent accidental table movements. This machine includes a precision V-way. Cross roller bearing ram system with a high-responce DC servo motor and ballscrew drive. A large T-slotted platen provides a convenient mounting surface for large electrodes. The Leadman features an adjustable backslide head. By manual crank, which ... moreextends the platen-to-table range so that small jobs can be clamped directly to the worktable. Setting up and measuring larger jobs is convenient with Hansvedt's two door worktank. Both the front and right side doors swing open for operator accessibility. The Leadman high efficiency dielectric systems respond quickly from rough cutting to fine finishing conditions. An adjustable worktank level/overflow discharges dirty fluid through a 25-micron prefilter screen while a high volume pump continuously filters fluid in the reservoir. An additional high pressure pump/filter system delivers clean fluid to the worktank manifold for flushing and worktank circulation. Changing the prefilter and cartridge filters is easy and economical. INCLUDES MS-2 Leadman/ M-Pulse CNC Owner's Manual System 3R Tooling FEATURES 50-amp Power Supply 100-gallon dielectric system 8" Ram Travel 8" Backslide Micrometer Down Stop Orbit Stop/Lock Servo Functions Twin High Intensity worklights One-shot Lubrication System SPECIFICATIONS MACHINE TOOL Positioning Table Travel 10.2" x 13.3" 260 x 340 mm Worktable Size 13.7" x 23.6" 350 x 600 mm Worktank Size 22" x 35.4&quo
|
|
|
EDM MACHINE SINKER RAM EDM HANSVEDT MV20 CNC
Just disconnected and was working great. Hansvedt MV20 75 amps 10x13 table movement. M pulse control. Chuck, orbiting head work lamp coolant tank, no manuals but you can get on line. Will skid and load for free.
|
|
|
CS-20 Hansvedt EDM with Acu-Rite DRO In Good Shape W/ Manuals 240 v 1 phase
Used Hanvedt CS-20 Ram EDM Serial#BI-19101 w/ ACU-RITE DRO and manual. This machine has been used very little in the last 7 years. Power Pack HP-1 Serial#BK-19105 wired for 240 volt single phase.Manufactured Date 2/24/99 We can load for free on your flat bed trailer or trucking company flat bed trailer.
|
|
|
EDM HANSVEDT BENCHMAN *COMPLETE* 3R HOLDER ANALAM DIGITALS
Just in 9-11 Hansvedt EDM with work lamps. Work chuck,digitals,3R head,oil. PLUG and play! Will package,band,wrap and load for free.
|
|
|
CNC Sinker EDM machine Hansvedt MS-4
Hansvedt MS-4 works great! Model#3025 date of manufacture 4/95 With system 3R 20mm rotating spindle and 20 pieces of 20mm shank tooling. Under power in Boulder City. N.V. Also full of EDM 250 fluid. We can forklift on to truck of your choice.
|
|
|
EDM FULL CNC HANSVEDT MS3 3R ORBIT HEAD AND HOLDERS
Just in and complete. Came out of a working company that shut down. Will add more information today. Will load for free.
|
|
|
Hansvedt CintroJet 200.B Manual Sinker EDM
This Hansvedt CintroJet 200.B Manual Sinker EDM is sold as-is with no warranty or return. Please do not hesitate to ask questions. 5129232774 Shipping will originate in the Austin. Texas area. A forklift is available. Please contact me if you need a quote. The approximate weight is 4000lbs. No spare parts or other equipment is included. Please note: we may require time to build a pallet or crate. Power requirement: 480V three phase Texas buyers must pay sales tax or present proper tax-exempt documentation. Local pickups can also present an out-of-state BOL. Overseas shipping is possible; please contact me first. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146af4425e1-0x10f-
|
|
|
Hansvedt M-Pulse Foreman CNC RAM type EDM machine sinker
We are downsizing our EDM department a little and are offering 2 of these machines. They have been used very little. Programmable cnc controlled x.Y, and z axis. Very nice machines. Both are under power. The first buyer gets to pick which of the 3 machines he/she wants. First come first served. We are accepting offers and any legitimate offer will be considered. You are welcome to arrange for riggers if you wish, or you can palatalize the machines and we can set them on a truck for you with our fork lift. The machines are basically a table top EDM, but we are including a 5 drawer cabinet with each machine, as seen in the pictures. We have only included pictures of one of the machines, but they both basically look identical and are of identical make and condition. Pictures are included of the manufacturers tag for each machine. You are welcome ... moreto come here and do a test cut with the machines if you wish while they are under power. I do not know if there is a screen that shows the hours on the machines. They use a floppy drive right now, but there is an easy and cheap converter for them to make them use a USB drive. You can contact us at the number on our website at
|
|
|
Hansvedt / Hardinge DS-2 Wire EDM
Advanced Integrated Technologies is one of the largest EDM facilities in the country. In terms of number of EDM machines. We are downsizing our EDM department a little and are offering 3 of our hansvedt/ hardinge EDM machines for sale. All three of these machines have just been checked out by Arrow EDM and certified functional and in good condition. We can offer a letter from Arrow EDM for each machine stating as much. All 3 machines are under power at our facility now. One of the 3 is a hardinge. If you know the history of this company, they bought hansvedt EDM and produced the same exact machine under the hardinge name for a while. These machine are manual Z axis machines, max height 6" They are perfect for doing small work. We have about 11 of these machines running at our facility now. The first buyer gets to pick which of the 3 ... moremachines he/she wants. First come first served. We are accepting offers and any legitimate offer will be considered. You are welcome to arrange for riggers if you wish, or you can palatalize the machines and we can set them on a truck for you with our fork lift. The machines are basically a table top EDM, but we are including a 5 drawer cabinet with each machine, as seen in the pictures. We have only included pictures of one of the machines, but they all 3 basically look identical and are of identical make and condition. Pictures are included of the manufacturers tag for each machine. You are welcome to come here and do a test cut with the machines if you wish while they are under power. I do not know if there is a screen that shows the hours on the machines. And even if there is a screen, I doubt it's accurate since the hard drives and various components have been replaced/upgraded on these over the years. They use a floppy drive right now, but there is an easy and cheap converter for them to make them use a USB drive. You can contact us at the number on our website at 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14770343eb8-0x114-
|
|
|
HANSVEDT 150B POWER SUPPLY WITH SOUTH BEND EDM SINKER MACHINE
This auction is for a Hansvedt 150B power supply and South Bend EDM sinker machine. It has a Brown& Sharpe magnetic chuck. The unit uses 110v power and shop air. This is a good working sinker EDM machine. Comes with manual& South Bend table. Check out my other auctions.
|
|
|
Hansvedt SM-1500E EDM Machine CNC
Hansvedt SM-1500E EDM Machine in good running condition. Includes System R3 Magnetic Tool system. Anilam Wizard 211 DRO, and 30 gallons on High Quality Synthetic EDM Fluid. Unit Runs on 220V Single Phase. Great Machine, serious inquiry's only please, this machine is a work horse. PLEASE NOTE: This Unit is FOB Grand Rapids MI, I will not ship this item. I will help load the unit for local pickup. I will not pallet the unit for pickup. Also Note: I reserve the right to end this auction early as the unit is also for sale locally.
|
|
|
Hansvedt SM-E9 EDM Finish Comparator Scale With Cover
Sorry I do not know what this is used for. Hansvedt is a famous manufacturing company. Photos show wear and tear nicks blemishes to metal rod. Measures 4 inches long 3/4 inch wide. With a case. Please use photos for best description and condition judgement. Thanks for looking. Posted with
|
|
|
SYSTEM 3R Conventional EDM Head 3R-7-02 with power pack AGIE Hansvedt R#0118
For sale is a System 3R-7-02 EDM head! Make: System 3R Serial Number: 3R-7-02 Country of origin: Sweden Condition: used. There is some wear and nicks from storage and use. The power pack turns on and cannot test further. Great for extras! Note: If you need something measured let me know! If you have any questions about this item or any other items listed feel free to send us a message! All items under 150 Lb's are shipped out with UPS Ground with insurance and a Tracking number. I can combine shipping to help lower the cost of shipping for the purchase of multiple items. Please note to buyers outside the United States. Please ask for a shipping quote before placing a bid or buying an item. Buyer pays all shipping; Ohio Sales Tax Rules Apply; Payment must be received within 7 days of close of sale. Sold AS IS. So no returns or refunds. ... moreI reserve the right to cancel this listing at any time no matter if there are active bids because this item is for sale locally. Good luck and happy bidding!
|
|
|
Hansvedt EDM Machine Shop Equipment Spark Eroder SE-180 NO RESERVE
Up for auction is a used Hansvedt SE-180 Spark Eroder EDM. It comes with the box next to it. Not sure what the extra box is, but it came with the Hansvedt when I got it at the estate sale of a machinist and aircraft mechanic/builder. I am unsure how to test it properly, however I plugged it up and it powers on, I ran a couple of my volt meter leads from it and made some sparks when hooked to a test piece of steel. It snaps really loud when the spark jumps. Thats as far as I tested it. SATISFACTION GUARANTEED with a one week return period. Buyer pays shipping and insurance both ways if needed. Shipping will run $28.50 USPS in the continental USA.
|
|
|
Hansvedt EDM SM-155 Booster Module
Hansvedt EDM SM-155 Booster Module This equipment is sold as one piece. However if someone is interested in buying parts from it, please send me an e-mail. Please refer to the pictures for more details. PLEASE CHECK OUT MY OTHER ITEMS& THANK YOU FOR LOOKING!
|
|
|
Hansvedt EDM CS-1Hansvedt EDM CS-1
Hansvedt EDM CS-1 This equipment is sold as one piece. However if someone is interested in buying parts from it, please send me an e-mail. Please refer to the pictures for more details. PLEASE CHECK OUT MY OTHER ITEMS& THANK YOU FOR LOOKING!
|
|
|
Hansvedt EDM Model 201
Hansvedt EDM Model 201 Model: 201 Serial: AP16808 Volts: 117 Amps: 30 Cycles: 60 Phase: 1 The machine is untested, so I am not sure if it is in working conditions therefore. It is sold for parts. If interested, send me an e-mail on the part you would like. Please refer to the pictures for more details. PLEASE CHECK OUT MY OTHER ITEMS& THANK YOU FOR LOOKING!
|
|
|
#MV-20 HANSVEDT 75 Amp Ram-Type CNC EDM Machine (New 2008)
Model: MV-20 HANSVEDT Ram-Type CNC EDM Machine. S/N: 2467(New 2008) Specifications: Work tank internal dimensions. L-R x F-B x H Table dimension. L-R x F-B Table travel. Longitudinal(X-axis) Table travel. Cross(Y-axis) Ram travel(Z-axis) Orbit travel. U-axis Orbit travel. V-axis Minimum/Maximum distance. Platen to table Electrode maximum weight Maximum workpiece weight Reservoir capacity 35.5" x 20.5" x 13" 20" x 12" 13" 10" 8" 400" 400" 6.75"14.75" 33 Lbs. 500 Lbs. 100 US gal Equipped With: M-Pulse 75 amp three-axis(U.V, Z) CNC control with a menu-based software operating system. 14" CRT, RS-232 port, 3.5" floppy disk drive, and remote control Programmable in the same program M-Pulse(Measured Pulse-produces sparks that are equal in duration) and V-Pulse(Variable Pulse-providing ... morethe best cutting rates under poor flushing conditions) operating modes Programmable orbiting/vectoring head with.400" U and V axis travel. Orbiting capability to enlarge a cavity or through-hole by an equal amount on each side or on a segment by using circular. Vector, or trace vector orbits X& Y axes manually positioned through the use of handwheels Interactive Digital Readout: Allows X and Y positons to be"programmed" from the control. The Work piece displays will change from red to black when a programmed XY move is read by the CNC control. The Work piece display will revert to black when the table is positioned at the program coordinates. Rigid cast iron quill-type ram with 3.375" x 3.25" platen to accept a V-block or precision tooling Precision cast iron XY table with turcite lined dovetail ways High-response DC servo and ballscrew drive High-flow dielectric fluid system with reservoir. Pump, and 5 micron filter Programmable DC arc protection#RBH-1C ROTOBORE spindle with assorted size collets 1/2 H.P. 3/60/220-380 volt dielectric pump motor and tank Machine is wired for 3/60/220 volt operation. Approximate Weight: 2.600 Lbs. Location: F
|
|
|
HANSVEDT EDM MODEL SM150B ELECTRICAL DISCHARGE MACHINE
Welcome to another auction by Best Bay Machinery Sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. You Are Bidding On A Pre-Owned HANSVEDT MODEL SM150B ELECTRICAL DISCHARGE MACHINE HANSVEDT 150B POWER SUPPLY on work bench 6" X 12" PERMANENT MAGNETIC CHUCK 9" X 15" T" SLOT WORK TABLE WT IS 1055# Shipped INFO FOR REFERENCE ONLY Description mfg info for reference only SM 150 B EDM Machine Amps 30, Model# SM-150-B, Serial# Ram Travel: 6" Ram Platen: 9" x 5" Tank Size: 24"x 18" x 11" Table Travel(L-R) 8" Table Travel(F-B) 6" Distance Ram Platen to Table max: 16" Throat Distance: 10" Dimension: 60" x 32" x on bench, 1.350 lbs. skidded, Equipped With: Oil Reservoir Tank Bench, Hydraulic ... morePump, Coolant and Filtration System, 150B power supply, There is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy,
|
|
|
HANSVEDT EDM MODEL 201 ELECTRICAL DISCHARGE MACHINE
YOU ARE BIDDING ON A VERY RELIABLE EDM. THIS EDM HAS HAD 1 OWNER. IT IS IN EXCELLENT WORKING ORDER. HANSVEDT MODEL PULSE 201 ELECTRICAL DISCHARGE MACHINE HANSVEDT 201 POWER SUPPLY 6" X 12" PERMANENT MAGNETIC CHUCK 9" X 15" T" SLOT WORK TABLE FOB SCHAUMBURG IL PICK UP ONLY- BUYER PAYS ALL SHIPMENT FEES PLEASE CONTACT WITH ANY QUESTIONS. THANK YOU FOR LOOKING!
|
|
|
10.5" Y 6.5" X Hansvedt DS-2 WIRE-TYPE EDM, HANSVEDT complete ready to use cnc
This unit is complete ready to use was replaced with brand new unit last year. I will skid pack and shrink wrap for freight collect shipping.
|
|
|
Hansvedt DS-2 WIRE-TYPE EDM, HANSVEDT CNC complete ready to use free shipping
This unit is complete ready to use. 10.5X 6.5Y it comes with caninet with drawers. I will skid pack and shrink wrap and ship for free. 2200lbs total weight
|
|
|
6" Y 8" X Hansvedt CS-1 RAM-TYPE EDM, DRO, 9" x 15" Tbl, 20 AMPS
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 6" Y 8" X Hansvedt CS-1 RAM-TYPE EDM. DRO, 9" x 15" Tbl, 20 AMPS Ref# 153730 iammdna XEDMRT HANSVEDT"CONVENTIONAL" RAM TYPE EDM MODEL: CS-1 WORKMAN S/N: AP13959 NEW: 1996 ... moreWORK TABLE SIZE. 9" x 15" TABLE TRAVEL. 6" x 8" WORTANK SIZE. 16" x 24" x 11"H PLATEN TO TABLE. 18" MAX. RAM TRAVEL. 8" PLATEN SIZE. 5.75" x 4" MAX. ELECTRODE WEIGHT. 75 LBS. MAX. WORKPIECE WEIGHT. 200 LBS. WORKTANK CAPACITY. 18 GALS. RESEVOIR CAPACITY. 45 GALS. APPROX. WEIGHT. 1.400 LBS. APPROX. DIMS. 64" x 38" x 82"H MACHINE FEATURES: HANSVEDT"H-PULSE" 201E 20 AMP POWER SUPPLY ON SEPERATE ROLL AROUND STAND-SIMPLE. UNDERSTANDABLE SPARK& SERVO CONTROLS-SERVO CONTROLS" FEATURING DITHER. MANUAL, EDGE FINDER, AUTO RETRACT. AUTO LOCK, ORBIT STOP, ORBIT LOCK, SERVO SPEED& GAP ADJUST-EDM CONTROLS" LOW PEAK CURRENT. ARC DURATION(5 TO 1843 MICROSECONDS) PEAK CURRENT, POLARITY, ELECTRODE MATERIALS& ON-TIME SELECTIONS FOR ULTRA-FINE FINISHING DC SERVO& BALLSCREW DRIVE FOR RAM RAM CYCLER PROVIDES UP/DOWN MOVEMENT TO PROMOTE BLIND CAVITY FLUSH"GAP MONITOR" AUTOMATIC DC ARC PROTECTION SYSTEM MICROMETER DOWN STOP W/AUTOMATIC RETRACTION EQUIPPED WITH: DIGITAL READOUT DIS
|
|
|
Hansvedt Plunge Sinker EDM Machine. Acu-rite VUE DRO, Vidmar, 201E Power Supply
Hansvet Sinker EMD with Pulse 201E Power Supply. Vidmar that the power supply rest on. Acu-rite 3 axis VUE digital readout. 2 Flex work lights System 3R chuck The machine is clean and in good shape. What you see in the pictures is what you get. Email or call(336-689-2709) with questions. Item is for sale locally. And subject to early removal from this listing.
|
|
 |