Amana Router Bit Router Bit Carbide Flute Router Cnc Router Bits Carbide Tip Shaper Cutter Router Cutter Carbide Router Bits Carbide Insert Shaper Cutter Router Bits 1 2 Freud Shaper Cutter Cnc Router Bit Router Bits 3 Carbide Tip Shaper Cutter 1-1 4 4-Wing Carbide Carbide Tipped Shaper Cutter 1-1 Router Bits 1 4 Carbide Router Bit Shaper Cutter Straight Router Bits 1 4 Shank Tip Shaper Cutter 1-1 4 Bore Straight Router Router Bits Set Router Bit 2 Woodworking Router Dia Carbide Tipped Woodworking Router Bits Router Bits 1 Router Bit Set Carbide Tipped Shaper Cutter Router Bit 1 2 Raised Panel Router Carbide Router Router Bits 1 2 Shank Insert Shaper Cutter 1-1 4 Door Shaper Router Shaper Whiteside Panel Cutter Shaper Cutter 1 2 Bore Pcb Carbide Amana Router Bits Solid Carbide Router Bits Shaper Cutters Rail Stile Flush Trim Cmt Router Carbide Cnc Router Bits Router Bit 1 Trim Router Cnc Pcb Dremel Wood Router Bits Shaper Bits Edge Router Bit Wood Shaper Woodworking Cnc Shaper Cutter Set Thick Shaper Cutter 1 2 Bore Raised Panel Shaper Cutter 1-1 4 Bore Craftsman Router Bits Dia Carbide Tip 3-Wing Carbide Tip Shaper Cutter 1-1 Router Bits 3 4 Freud Shaper Bit Straight Dado Cnc Router Bits Woodworking Shaper Cutter 3 Cutter Bits Inch Bore Lach Diamond Corner Round Router Bit Lot Router Bit Used Diamond Router Bits Spiral Bit Freud Router Bits Slot Cutter Single Flute Cutter Router Bits Rounding Shaper Cutter 1 Flute Upcut Spiral Router Bit 1 2 Shank Powertool Cutter Trim 2 Shank Powertool Cutter Trim Shape Carbide Tipped Router Bits Flute Straight Porter Cable Router 3 5 Bore Router Table Power Tools Cutter Trim Amana Tools Woodworking Tools Pcb Bit Shank Amana Router Bits 1 16 Ballnose 1 2 1 2 Bore 1 2 Cuts 1 2 Inch 1 2 Shank 1 4 Cuts 1 4 Inch 1 4 Shank 1 8 1 Pcs 1-1 4 Bore 1-1 4 Bore 1 1-1 4 Bore 3 1-13 16 1-3 8 16 Bore 16 Cuts 2 Dia 2 Flute 2 Flutes 3 4 Bore 3 4 Cuts 3 4 Hole 1 2 Bushings 3 8 Rounderover 3 Wings 4 Cuts 4 Cutting 4 Dia 4 Milling 5 16 5 8 Cuts 5 Dia 5 Diameter Carbide Tip 6 6Mm 8 Cuts 8 Cutting 8 Dia 8 Diameter 8 Shank 8Mm Amana Beading Bearing Bits 3 Blades Carbide Carbide Carbide 2 Carbide Insert Carbide Tip Carbide Tipped Carving Bit Cherokee Tools Cnc Cnc Engraving Bit Cnc Router Cnc Tools Craftsman Cuts 5 Cuts 5 Diameter Carbide Cuts 6 Cuts 7 Cuts 8 Dia Cuts Length Cuts Router Cutter Cutter 1 2 Cutter 3 Cutter 3 4 Cutter Set Delta Rockwell Diamond Diamond Cuts Dremel Trio Drill Bits Edge Engraving Bit Inch Shank Long Ocemco Panel Door Pattern Pcb Pcb Engraving Pcb Engraving Bits Pcd Cnc Wood Router Bits Piece 1 Plotter Porter Cable Power Tools Profile Rabbeting Dado Rabbeting Groove 1 4 Cuts Radius 1 Rail Rockwell 1 Round Over Router Bits Round Router Bits Roundover Bits Router Router Bit Router Bits Router Collet Nut
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
4 Pcs Cutter Router Bit 4 Flute - 1/4" Shank Woodworking Milling Cutter
$
32.90
Buy It Now
Free Shipping
Condition: New
Location: China
10pcs One Single Flute Spiral CNC Router PVC Endmill Bits 3.175mm × 2mm ×6mm
$
40.62
Buy It Now
Free Shipping
Condition: New
Location: China
2 Flute Flat Spiral End Mill. 2 Flute Flat End Mill. 4 Flute Flat End Mill. 2 Flute Ball Nose End Mill. 4 Flute Ball Nose End Mill. 1 Flute Spirl End ... moreMill. 3 Flute Flat End Mill. 2 Flute Tapered Ball Nose.
Carbide 3.175mm Shank 2 Flute Engraving Bits CNC Router Tool V Shape 20°/30°-90°
$
68.91
Buy It Now
$5.00 Shipping
Condition: New
Location: China
Material: tungsten steel blade/45 steel shank. Use: Engraving. Applicable materials: solid wood, hardwood, density board, mahogany and other wood.
Onsrud 18-00 Router Bit , Hss , 1/4 D ,3/4 Cut L,1 Flute plunge cut 5 pieces
$
22.99
Buy It Now
$6.90 Shipping
Condition: New
Location: Cleveland, United States
5 pieces each router bit onsrud 18-00
1/4 Shank 3 Teeth Router Bit Set T Shape Tenon Cutter Wood Door Floor Carpentry
$
12.81
Buy It Now
Free Shipping
Condition: New
Location: China
DIY Supplies: Woodworking. - Shear angle and shear angle The high shear angle and shear angle allow the cutter to cut smoothly into thin slices, resulting ... morein a clean, debris-free material. Shank Shape: Round.
Carbide Tipped Router Bit Set (5-Piece)
$
15.96
Buy It Now
Free Shipping
Condition: New
Location: Fairfield, United States
Buy it now at only 60.99$ MLCS 8810 Flush and Pattern Trim Router Bit Set. 5-Piece Product description The 5-Piece MLCS 8810 Flush and Pattern Trim Router ... moreBit Set is 2-flute and carbide-tipped with totally enclosed ball bearing guides. Flush trim bits are for trimming laminates and pattern routing. Pattern and flush trim bits with top mounted bearing are ideal for template routing. In addition to template routing. Pattern and flush trim bits are convenient for flush trimming in many applications where a bottom mounted bearing is not practical. Includes 1/2-Inch large diameter pattern and flush trim bit with 1/4-Inch shank, 3/4-Inch LD pattern and flush with 1/2-Inch shank and three 1/2-Inch shank, 1/2-Inch LD flush trim bits(1-3/16-Inch, 1-5/8-Inch and 2-Inch cutting length) Product Features· Top quality carbide-tipped bits· Includes 5 flush trim and pattern flush trim bits in most popular sizes· Great set savings· Trim laminates. Rout patterns, do template routing· 1/4-Inch and 1/2-Inch shank bits PLEASE MAKE SURE THAT YOU UNDERSTAND OUR TERMS BEFORE BIDDING! Return Policy:You may return an item for any reason! We Work Very Hard to Ensure Our Customers Are Happy With Our Products.But For Any Reason. If You Are Not Satisfied With Any Of Our Products,Please Return It Within 30 Days Of The Ship Date in Original Condition For a FULL REFUND. Payment: PAYPAL ONLY We Only Are Able To Ship To The Lower 48 States. We Cannot Ship To Military Addresses. We Ship To Physical Addresses Only. We only ship to the address supplied to us by Ebay( No Exceptions) We do not ship to Alaska/Hawaii. US Protectorates, APO/FPO, PO Box. What makes us better than the rest! SUPER FAST& FREE SHIPPING! Toprate customer service 100% Satisfaction Feedback: You Will Get a POSITIVE FEEDBACK From us Instantly We Receive Your payment.Once You Are Satisfied With Our Products and Service. Your Leave Positive Feedback Would Be Appreciated! Contact Us: Please contact us via eBay Messaging as soon as possible regarding any i
2 x Ball Nose Carbide End Mill 1/4'' 2 Flute CNC Router Bit UpCut Spiral Milling
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, ... moreetc. PREMIUM QUALITY. 2 pieces high quality end mill in a individual plastic box.
US Stock 10pcs Carbide PCB Engraving Bits CNC Router Tool 20 degrees 0.2mm
$
15.59
Buy It Now
Free Shipping
Condition: New
Location: Cranbury, United States
Type: Flat bottom engraving bits. Fibre glass. High-precision tool grinding large capacity Chip elimination, high efficiency and good quality of products. ... moreA power tool for 2D sculpture, 3D sculpture.
BANDSAW BALL BEARING BLADE GUIDE-UPPER OR LOWER -FITS MOST 14" BAND SAWS
$
40.00
Buy It Now
$8.50 Shipping
Condition: New
Location: Beaver Falls, United States
NEW STYLE BALL BEARING BLADE GUIDE-UPPER OR LOWER-FITS MOST 14" SAWS. This is the New Style Blade Guide. it replaces the "old style" Cool Block (Friction ... moreReduction Block holders on most 14" Band Saws. ).
Lot of (5) Diamond Cut 3/8" Carbide Router Bits Fiberglass 2-1/2" Long
$
29.99
Buy It Now
Free Shipping
Condition: Used
Location: Westland, United States
These have a drill point on the end of them. The overall length of these is about 2-1/2". From the top of the cutting teeth to the drill point is about ... more1-1/8". These were used very little and have plenty of life left in them.
Forstner bit 11/16" with 3/8" shank (3-10)
$
9.15
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This is a 11/16" forstner bit. The shank is 3/8". These cut with the outer rim and give you very clean holes. They are much better at drilling at an angle ... morethan brad points.
(1) NEW Yonico 1-1/4" D Rabbeting/Slot Carbide 3/8" Tip Bit 1/2" Shank y4
$
12.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
3/8" cutter height. Bit removed from new multiple bit set.
6pcs HSS Routing Router Grinding Bits Burr Milling Cutter for Power Rotary Tool
$
3.95
Buy It Now
$2.89 Shipping
Condition: New
Location: China
Features: 100% brand new. High grade Bits. All of the shanks are 3.17mm and compatible with other multi-tool machines including Dremel. These 6 HSS Routing ... moreBits are perfect for all sorts off jobs like Model making and the like. Using an engraving machine or mini-Drill various forms of cutting part provide efficient processing which materials length is about 40mm. For processing of metallic and Non-metallic surfaces. .
5pcs Tapered Ball Nose End Mill 2-Flute Milling Cutter 1/8''Shank CNC Router Bit
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Specification: Type: Tapered Ball Nose End Mill Material: Tungsten Carbide Coating: Nano Blue coated Radius: 0.25mm Shank: 3.175mm (1/8'') Cutting Length: ... more15mm Overall Length: 38mm HRC: 65 Flute: 2 Application: Aluminum, Hardwood,plastics, castings, copper, aluminum, titanium, nickel alloy, copper alloy, stainless steel mold, alloy steel, 45# steel Package Including: 5Pcs Ball Nose End Mill.
10pc 1/8" Carbide Alloy End Mill Single Flute Spiral CNC Router Bit Cutter HRC55
$
33.55
Buy It Now
Free Shipping
Condition: New
Location: 新北区, China
2 Flute Ball Nose End Mill. 4 Flute Ball Nose End Mill. 2 Flute Flat End Mill. 2 Flute Flat Spiral End Mill. 4 Flute Flat End Mill. 1 Flute Spirl End ... moreMill. 3 Flute Flat End Mill. 2 Flute Straight End Mill.
Primark DML 00977 1/2" x 1-1/8" x 1/2" 2 Flute Panel Pilot Router Bit
$
24.38
Buy It Now
$3.00 Shipping
Condition: New
Location: Saint Louis, United States
We are happy to help. Credit Card or Debit Card.
10pcs One Single Flute Spiral CNC Router PVC Endmill Bits 3.175mm × 2mm ×15mm
$
44.06
Buy It Now
Free Shipping
Condition: New
Location: China
2 Flute Flat Spiral End Mill. 2 Flute Flat End Mill. 4 Flute Flat End Mill. 2 Flute Ball Nose End Mill. 4 Flute Ball Nose End Mill. 1 Flute Spirl End ... moreMill. 3 Flute Flat End Mill. 2 Flute Tapered Ball Nose.
(10) - 1/8" (.1250") DIAMOND-CUT CARBIDE ROUTER BURRS, FT Kyocera 2100.1250.472
$
19.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
They are 1.5” long, and flute length of (.472”). Shank Size. Flute Style. Part number: 2100.1250.472. The “rules of the tools” apply.
5pcs Double Edged Straight Router Bits 2 Flutes Milling Cutter 1/4" Shank
$
22.95
Buy It Now
Free Shipping
Condition: New
Location: China
Features: 100%Brand new, high quality. A Wide Range of Materials can be engraved, including: multilayer board,MDF,Foam,Plywood etc. Specifications: Material: ... moresolid carbide Number of Flutes: 2 straight flute Shank diameter: 6.0mm Cutting edge diameter: 6.0mm Cutting edge length: 25mm Total length: 50mm Package included: 5 x Straight Slot CNC Router Bits.
.9mm #65 .035" FIVE Pcs. Carbide Drill Bits 1/8 Shank cnc FR4 G10 MDF Metal R/S
$
9.44
Buy It Now
$4.95 Shipping
Condition: Seller refurbished
Location: Monroeville, United States
Five Pieces #65 .0354" .90mm Carbide Drill Bits 1/8" Shank Factory Resharpened - Same Performance as New for Less.
(5) 1.90mm (.0748") CHIPBREAKER CARBIDE ROUTER BURRS, DP Kyocera 2300.0748.315D
$
8.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
They are 1.5” long, and flute length of (.315”).
MicroJig GRR Ripper Table Saw 3D Push Block
$
29.99
Buy It Now
$11.60 Shipping
Condition: Used
Location: Queen Creek, United States
Very good condition.
Whiteside Router Bit 2000C Round Over Bit Ball Bearing 1/8" Radius 3/4" Diameter
$
24.99
Buy It Now
Free Shipping
Condition: New
Location: North Port, United States
This bit is excellent for producing smooth, uniformly rounded edges. Lowering the depth setting will produce a rounded corner with a decorative fillet. ... moreExcellent for producing smooth, uniformly rounded edges.
(1) NEW 1/8" R Double Roman Ogee Carbide Tip Router Bit 1/2" Shank Bearing zd
$
12.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
This listing is for one(1) new/unused 1/8" R Double Roman Ogee Carbide Tip Router Bit 1/2" shank Approximately.425" carbide length(along ... moreaxis) 2 flute 3/8" Bearing diameter Overall diameter approximately 1" Bit removed from new multiple bit set. No OEM packaging is included. We will be adding items. to view my other listings. Communication We use eBay's automated notification system for notifying you of status updates regarding shipping and tracking. These emails are sent only to the email address linked to your eBay account; these messages do not appear in the'Messages' section of the'My eBay' tab. We upload tracking information for every order we ship. You can also see shipping status and access tracking numbers through'Purchase History' in the'My eBay' tab. We do not typically send any direct communication through eBay messages unless there is an unusual situation. If you have a question or concern about the status of your order or if there is an unanticipated problem with an item. Please contact us through the'Contact seller' link in the listing(using the"Other" option) If you can not highly rate your purchasing experience from us, please let us know what can be done to fix the situation. Payment Information Payment must be made immediately upon purchasing this item. PayPal is the only accepted payment method. If you are unsatisfied for any reason with this item once you receive it. Please contact us immediately(through the"Other" option in the'contact seller' link) to report the problem and we will work with you to correct the situation. Please see our return policy for more information. Internal 67
4pc 4 Flutes Roughing Chipbreaker Milling Cutter HSS End Mill Router Bit 6-12mm
$
14.45
Buy It Now
$4.00 Shipping
Condition: New
Location: China
Type: Four-Flute Roughing Chipbreaker. 1x Set (4pcs) 4 Flute Roughing Chipbreaker Cutter. Has good milling and cutting performance, ensure the high efficiency ... moreof the work. Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board,the surface is clean, neat, no glitches.
(1) NEW 3/8" Tip Rabbeting 1-1/4" D Carbide Router Bit 2 Flute 1/2" Bearing zm
$
12.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
3/8" cutter height. Bit removed from new multiple bit set.
(5) - 2.50mm (.0984") CHIPBREAKER CARBIDE ROUTER BURRS, FT 2300.0984.394
$
9.25
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
They are 1.5” long, and flute length of (.394”).
10Pcs 1/8" Shank Carbide End Mill CNC Milling Engraving Cutter Tool Router Bits
$
15.78
Buy It Now
Free Shipping
Condition: New
Location: China
(3) NEW 1/4" D Panel Pilot Trim Carbide Tipped Router Bit 1/4 Shank qw
$
15.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
10 Pcs 1/8'' Shank Ball Nose End Mill CNC Engraving Router Bits Milling Cutter
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: China
Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
10pcs 1/8" Shank 2 Flutes Straight Slot Carbide End Mill Cutter CNC Router Bit
$
16.17
Buy It Now
Free Shipping
Condition: New
Location: China
Number of Flutes: 2 straight flute. Cutting Edge Length: 20mm. A wide range of materials can be engraved, including: Multilayer board, MDF, foam, plywood ... moreetc.
(3) NEW 3/8" Radius Cove Carbide Tipped Router Bit 1/4" Shank Bearing qw
$
15.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
This listing is for one(1) new/unused 3/8" Radius Cove Carbide Tipped Router Bit 1/4" shank 2 flute 3/8" radius 9 mm(355 inch) bearing ... morediameter Bit removed from new multiple bit set. No OEM packaging is included. Offers will be considered for multiple item purchases. We will be adding items. to view my other listings. Communication We use eBay's automated notification system for notifying you of status updates regarding shipping and tracking. These emails are sent only to the email address linked to your eBay account; these messages do not appear in the'Messages' section of the'My eBay' tab. We upload tracking information for every order we ship. You can also see shipping status and access tracking numbers through'Purchase History' in the'My eBay' tab. We do not typically send any direct communication through eBay messages unless there is an unusual situation. If you have a question or concern about the status of your order or if there is an unanticipated problem with an item. Please contact us through the'Contact seller' link in the listing. If you can not highly rate your purchasing experience from july1503, please let us know what can be done to fix the situation. Shipping& Handling The item will ship USPS First Class Mail for free. Payment Information Payment must be made immediately upon purchasing this item. PayPal is the only accepted payment method. If you are unsatisfied for any reason with this item once you receive it. Please contact us immediately to report the problem and we will work with you to correct the situation. Please see our return policy for more information.
NEW Yonico 1/2" Tip 1-1/4" D Rabbeting/Slot Carbide Bit 1/4" Shank y2
$
11.00
Buy It Now
$9.85 Shipping
Condition: New – Open box
Location: Gainesville, United States
Also, it has 3 extra bearings with different sizes & hex micro-wrench. Glass window of wooden box has cracked vertical line, but still intact. Does not ... morehave any stains. Rare, collectible, difficult to find in gift like box.
Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut
$
56.70
Buy It Now
Free Shipping
Condition: New
Location: United States
Part Number: ‎RFT2100. Item model number: ‎RFT2100. Manufacturer: ‎Whiteside. Providing state of the art results in flush trimming. Spiral Flush Trim ... moreUp Cut. Shape: Round. Shape: ‎Round. Number of Handles: ‎1.
2-Flute Ball Nose Tapered End Mill CNC Spiral End Mill Router Bits 1/8” Shank
$
9.02
Buy It Now
Free Shipping
Condition: New
Location: China
Jig Saw Blade & Reciprocating. Engraving Bits. Twist Drill Bit. Circular Saw Blades. Blue Coating: The end mills are blue coating, which is high hardness ... moreand heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.
4 Flute 3/32 Carbide End Mill Milling Cutter 1/8 Shank for Metal CNC Router Bit
$
8.57
Buy It Now
Free Shipping
Condition: New
Location: China
Specification: Type: 4 Flute End Mill Material: Carbide Cutting Diameter:3/32inch Cutting Shank: 1/8 Cutting Length: 7.14mm Overall Length: 1.56inch Note: ... moreDue to the difference between different monitors, the picture may not reflect the actual color of the item. Package Including: 1 Pc 4 Flute End Mill.
3/32" (.0938") DIAMOND CUT CARBIDE ROUTER BURRS FT WITH RINGS 4100P0938.315
$
2.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
They are 1.5” long, and flute length of (.315”). For use in routing glass filled materials such as epoxy (circuit board depanelization) or carbon fiber. ... moreCan also mill a wide variety of other materials such as wood and ceramic.
DECALS - $20 FOR ANY 5 PCS - FOR VINTAGE DELTA WOODWORKING MACHINERY -
$
20.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Freeland, United States
This product line will be using similar decals, but each being partially clear. These decals will be adhered to either a stainless steel or aluminum plate ... morefor affixing to your Delta machine. There are 10 types of decals to choose from.
Beading Router Bit 1" Cut x 1/4" Radius x 1/2" Shank
$
28.43
Buy It Now
$3.00 Shipping
Condition: New
Location: Saint Louis, United States
Radius: 1/4".
1/32" #68 0.8mm Carbide Drill Bits - FIFTY PIECES - 1/8" Shanks LU
$
31.45
Buy It Now
Free Shipping
Condition: Used
Location: Monroeville, United States
1/32" Solid Carbide Drill Bits - FIFTY Pieces Lightly Used.
NEW Roto Zip CN1 Replacement Collet and Nut Kit FOR ROTOZIP TOOLS 7720808
$
9.89
Buy It Now
$3.95 Shipping
Condition: New
Location: United States
ROTOZIP TOOLS. Kit includes 1/8", 5/32", and 1/4" collets and collet nut. Includes:(1) 1/8 in Collet, (1) 5/32 in Collet, (1) 1/4 in Collet, (1) Collet ... moreNut. GREAT SALE PRICE.
1/8" Shank 2 Flutes Solid Carbide Down cut Spiral End Mill Cutter CNC Router Bit
$
5.32
Buy It Now
$2.00 Shipping
Condition: New
Location: China
Type: Down Cutter. 1pc Down Cutter. Shank: 1/8" (3.175mm). Application: Acrylic, PVC, MDF, high-density board, lotus board, Solid wood, wood, plastic ... moreplate, double color sheet, Aluminium and etc. Cutting Length: 15mm.
10X 1mm Titanium Coat Carbide End Mill Engraving CNC Router Bits 1/8'' Shank New
$
14.10
Buy It Now
Free Shipping
Condition: New
Location: 金东区, China
10 End milling cutter engraving drill bit. Tip: The longer the tool clamped by the chuck, the better. If the clamping length is short, you need to reduce ... morethe feed rate and cutting speed to reduce vibration and extend tool life.
SABURR TOOTH 3/8" Flame Burr Bit Coarse (Green) - 3/32" Shank - 32F38-50
$
16.34
Buy It Now
Free Shipping
Condition: New
Location: Eagle Lake, United States
Coarse Grit – 3/32" Shank. (Grit: Coarse (Green)). Always wear eye and ear protection when working with cutting tools. Do not remove any machine safety ... moreguards. Your safety is our #1 priority! Head Length: 3/8".
(1) NEW Grizzly 1/8 R Double Roman Ogee Carbide Tip Router Bit 5/16 Bearing g2
$
14.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
1/4" shank /2 flute. Bit removed from new multiple bit set.
Amana Tool 46439 Solid Carbide Spiral Plunge 3/8" x 7/8" Router Bit 3/8" Shank
$
30.00
Buy It Now
Free Shipping
Condition: New
Location: Goffstown, United States
(d) Shank 3/8. Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The ‘Down-Cut’ cuts from the surface ... moredown leaving a smooth edge at the surface. (B) Cutting Height 7/8.
Freeborn Insert Raised Panel Shaper Cutter - IC-15-003
$
185.00
6d 14h 27m 15s
0 bids
$14.95 Shipping
Condition: Used
Location: Spokane, United States
Freeborn IC-15-003 insert raised panel shaper cutter.
(1) NEW 1/4" D 90 degree V-groove Carbide Tipped Router Bit 1/4" Shank zm
$
12.90
Buy It Now
Free Shipping
Condition: New
Location: Park Rapids, United States
Amana 45200 Solid Carbide Cutting Edge Straight Plunge High Production 1/8 Dia
$
9.00
Buy It Now
$4.19 Shipping
Condition: Used
Location: Hadley, United States
I don't know if this has been used.
Amana #51570 Bullnose Carbide Router Bit, NEW
$
35.00
Buy It Now
$3.95 Shipping
Condition: New
Location: Tucson, United States
Gundlach Cove Base Groover (532) FS
$
35.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Sterling, United States
Grooving depth is adjustable using the knurled steel nut. Wood handle is rounded to fit the palm comfortably. Blade is replaceable and resharpenable (No. ... more533). Net weight: 3 oz. Forms a 5/32" wide groove on the back side of vinyl or rubber cove base to produce tight-wrapped corners.
1/2 Inch Shank Finger Joint Router Bit Woodworking Milling Cutter With Bearing
$
23.09
Buy It Now
Free Shipping
Condition: New
Location: United States
Material: YG6 alloy cutter head, 45# carbon steel cutter body. cutting edge, high hardness, accurate positioning, impact resistant. Feature: 1. Used for ... morethe tenoning and jointing of the timber. If you do not receive our reply within 48 hours, pls.
1/8" Two Flute Solid Carbide Engraving Bit 20-90 Degree CNC Router Tool for Wood
$
3.89
Buy It Now
$2.99 Shipping
Condition: New
Location: China
● Applicable materials：Solid wood, Hardwood, MDF, Redwood and other woods. 20 Degree, 30 Degree, 40 Degree, 45 Degree, 60 Degree, 90 Degree. ● Angle: ... more20 Degree, 30 Degree, 40 Degree, 45 Degree, 60 Degree, 90 Degree.
3/16" (.1875") CARBIDE SINGLE O FLUTE ROUTER FOR HARD PLASTIC ONSRUD 63-717
$
29.80
Buy It Now
Free Shipping
Condition: New
Location: Georgetown, United States
Onsrud is considered the premium supplier/manufacturer for plastic and wood cutting endmills. Flute Type Upcut. These endmills are great for cutting hard ... moreplastics, and reinforced plastics (such as acrylic, nylon, PVC, polycarbonate, and solid surface).
Crain 856 Replacement Blade for 855 Wood Miter
$
14.37
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
With our dynamic pricing model, our prices are always competitive.
SHARS 1/2" Shank 7 PC Woodworkers Set Woodworking Wood Router Bit NEW P
$
18.14
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
Body finished with coat to prevent build-up of sawdust, resin, and pitch. Roundover bits are typically used to make quarter rounds of various radius. ... moreAlso can be used to soften edges to give a softer appearance or avoiding sharp edges.
Router Bit, Carbide Tipped 3/4" x 1 1/4” LOC Plunge Style, 1/2" Shank, USA
$
13.50
Buy It Now
$6.80 Shipping
Condition: New – Open box
Location: Tucson, United States
It was part of a bulk lot of 50 pieces that were sold to us. This bit is marked “WHITESIDE MACHINE/USA #1085.
Amana Tool Solid Carbide Fiberglass Cutting Router Bit
$
36.99
Buy It Now
Free Shipping
Condition: New
Location: Tracy, United States
This bit is designed especially for cutting fiberglass, fiberglass PCB board, composites, phenolic and other highly abrasive materials. Works well on ... moreepoxies made with carbon, glass and composite materials.
10 PIECE USA MADE 1.60 mm (.0630") CARBIDE DIAMOND CUT FLUTE ROUTER BITS
$
9.95
Buy It Now
Free Shipping
Condition: Used
Location: Fayetteville, United States
10 Piece 1.60 mm(.0630")......... CNC PCB DREMEL DIAMOND CUT FLUTE CARBIDE ROUTER BIT.......... Constructed of Industrial Grade Solid Tungsten Carbide........... ... moreManufacturer Union Tool ........... Please note ,These bits are Very Sharp and lightly used and Each Piece has Been Cleaned . These router bits can be used for your plastic, soft media, wood, or metal ....... MADE IN USA
10pcs 3mm Titanium Coat Carbide End Mill Engraving Router Bits 1/8" Shank
$
24.83
Buy It Now
Free Shipping
Condition: New
Location: China
Specification:Cutting Edge Diameter: 3mm / 0.118"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 12.0mm / 0.47"Overall Length: 38mm / 1.5"Material: ... moreCemented CarbideSurface Treatment: Titanium CoatedPackage Content: 10 x Carbide End Mill Engraving Bits Description:1. Made from carbide material, good milling properties to ensure efficient work.2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.3. Cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..5. Tips: The longer the length of the tool clamped by the chuck, the better.
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
 In 

Former Listings  
 
9 Milwaukee CARBIDE ROUTER BIT & LAMINATE TRIMMER BIT Assorted Bits Made in USA
9- Milwaukee carbide router& laminate trimmer bits 1/4” shank all bits are made in USA. See photos for details. New Carbide Tipped#48-23-5090 straight 5/8” Used in very good condition Carbide Tipped#48-23-5080 straight 1/2” 48-23-5070 straight 3/8” Piloted chamfer 1-1/4” 48-23-6700 flush laminate trimmer. 48-23-6000 pilot panel bit 1/4” 48-23-6715 combination straight 22 deg bevel trimmer Like new condition opened but never used Solid Carbide#48-23-5195 bevel trimmer 7-½ degree#48-23-5235 flush trimmer 1/4” ITEM DESCRIPTION is as complete and accurate as I could make it. If you need additional information or photos, please contact me. SHIPPING COST is for the well-packed auction item per ebay calculator. I ship USPS most appropriate rate or UPS ground whichever service I feel is most appropriate. Insurance will added when necessary. ... moreMultiple Wins when possible will be combined for a lower shipping price. SHIPPING TIME is 1 business day or quicker if possible. All items may be picked up. PAYMENT by PayPal. Or Cash at Pickup. If you have a payment question or need to use a check contact me before bidding. PAYPAL PAYMENTS will ship only to the address shown on the paypal transaction record NO EXCEPTIONS. INTERNATIONAL BUYERS: PayPal payments only from the countries that are covered by paypal seller protection. Shipping will be to the address shown on the paypal transaction record NO EXCEPTIONS. RETURN POLICY: I stand behind the item as described and pictured. If there is a major error. Not nitpicking details or suitability of use, please contact me within three days of receipt so I can resolve the problem. Items returned without contacting me first will not be accepted. Returned items must be in the same condition as sent. Shipping cost may not be covered. PLEASE: Winning bidder is expected to respond in a timely manner. PayPal payments should be received within 3 days following the end of auction; on day 5 a no-pay bidder notification will be sent. Thank You Powered by The free listing tool. List your
ONSRUD S026080 Solid Carbide Straight Bit 2 Flute 3/8 Dia, 1" Cut Length, 3/8 S
ONSRUD 5026080 Solid Carbide Straight Router Bit. 2 Flute, 3/8" Dia. 1" Cut Length, 3/8 Shank, 2-1/2" OAL Used several times. Small spots. No effect for to use. Thanks for taking the time to look at our item.
HKS Convex Radius Cutters with Arbor 3/8"-24 at the end of the threade
HKS Convex Radius Cutters with Arbor 3/8"24 at the end of the threade Used. Grinding and scratches from being used Connection: Arbor 3/8"24 at the end of the threade Radius: 1/2" Diameter of Cutter: 2-7/32" Width of Cutter: 1" Number of Teeth: 12 Hole Diameter of Cutter: 3/8"24 Arbor Shank: 5/8" Arbor Overall Lenght: 4-7/32" Quantity: 1 Thanks for taking the time to look at our item.
6pc Shaper Bits 1/2" Bore, Good Condition, Used, Bin 06
6pc Shaper Bits 1/2" Bore. Good Condition, Used, Bin 06. 2 of the 6 of the shaper bits have numbers stamped on them- the rest have no identification markings. D-138, 186-38 Payment 1. We accept Paypal. E-mail or Phone to the store Credit cards only. 2. Please notice payment to be made in 14 days of the auction ending. 3. Auction without payment will be delayed. After 14 days subject to Re-listing and Non-Paying Bidder will be assessed. 4. In addition to Paypal payment method. Please email or call us for more payment Options. 5. Please contact us with any questions prior to purchasing. Ask For Donny at 509-327-5544 M-F 9am-5pm Pacific Time. Products& Descriptions. 1. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary. But are the same product. Items are described to the best of our ability ... moreto be content accurate. Some Close Out items may show distressed packaging. Last item sold of multiple qty's will be the Display model and Packaging may have been opened for photos. Shipping We Ship Worldwide. Except Spain. And we do ship to APO/FPO. We process your order within 1-3 business day upon payment( note: NOT counting Holidays or Weekends) All item(s) will be shipped by US Postal Service: First Class or Priority Mail as Primary Carrier. We do use UPS or Fed-Ex for Larger Packages inside the US. If you prefer Other Shipping Options. They are available depending what you choose. Drop down window in the item listing will show other options available. All items will be shipped to buyer's ebay address. Please check your ebay address is correct. Any other options you need to contact us by phone to double confirm shipping changes. Overnight Shipping can be done if given enough time in advance. Cut off Time is 2:00pm Pacific Time for OVER Night Delivery’s to be shipped same day. Exact delivery time depends on Postal-UPS-Fed-Ex processing International shipping: United States Postal Service. other options available) Multiple items purchased in your shopping cart can
HKS Convex Radius Cutters 2pcs w/ Arbor 1pc 3/8"-24 at the end of the threade
HKS Convex Radius Cutters(2pcs) with Arbor(1pc) 3/8"24 at the end of the threade Used. Now resharpened. Ready to work. Connection: Arbor 3/8"24 at the end of the threade Radius: 1/4" Diameter of Cutter: 2-3/32" Width of Cutter: 1/2" Number of Teeth: 12 Hole Diameter of Cutter: 3/8"24 Arbor Shank: 5/8" Arbor Overall Lenght: 4" Quantity: 1 Radius: 1/4" Diameter of Cutter: 2-3/16" Width of Cutter: 3/16" Number of Teeth: 12 Hole Diameter of Cutter: 3/8"24 Quantity: 1 Thanks for taking the time to look at our item.
ROUTER MACHINE WOOD METAL BITS UNKNOWN ORGIN AND USE FAST SHIPPING
I HAVE NO CLUE WHAT THESE WERE USED FOR OR WERE OFF OF. THEY CAME WITH AN ASSORTMENT OF TOOL I PURCHASED. THEY LOOK LIKE WOOD BITS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b5e3d1ab6-0x113-
HKS Double Concave Radius 1/4"Cutters w/ Arbor 3/8"-24 at the end of the threade
HKS Double Concave Radius 1/4" Cutters with Arbor 3/8"24 at the end of the threade Used. Now resharpened and honed. Ready to work. Connection: Arbor 3/8"24 at the end of the threade Radius: 1/4" Diameter of Cutter: 2-9/32" Width of Cutter: 1/2" Number of Teeth: 12 Hole Diameter of Cutter: 3/8"24 Arbor Shank: 5/8" Arbor Overall Lenght: 4" Thanks for taking the time to look at our item.
FCT L3 400128 HSS 7/16"Dia. Straight Router Bit, 2 Flute 1" Cut Leng., 1/2"Shank
FCT L3 400128 HSS 7/16"Dia. Straight Router Bit. 2 Flute 1" Cut Leng. 1/2" Shank Used several times Thanks for taking the time to look at our item.
Onsrud 60-325 CNC 3/4"Spiral Compression Solid Carbide 2 Flute Upcut Chipbreaker
Onsrud 60-325 Spiral& Compression CNC Spiral 3/4" Solid Carbide Two Flut Upcut Chipbreaker/ Finisher for Hard and Composite Woods Sharpened and honed. Like razor-sharp. Ready to work. Application: For Natural Wood. Wood Composites and Solid Surface. Direction Up-Cut, D) Diameter.730" B) Cutting Height 2-1/8" d) Shank 3/4" Overall Length(L) 4" Flutes Direction of Cut Point Type Material Finish 2 Right Hand Center Plunge Solid Carbide Uncoated Thanks for taking the time to look at our item.
Lot 11 Assorted Router Bits Craftsman, Stanley, USA
Lot 11 Assorted Router Bits Craftsman. Stanley, USA Auction is for nice lightly used lot of 11 router bits. From estate. All high quality USA. 1/4" Stanley Straight bit, 1/8" Craftsman Straight bit, 1/4" Craftsman Straight bit, 3/8" Craftsman Straight bit, 3/16" Craftsman Veining bit, 1/8" Craftsman Veining bit, 1/4" Craftsman Veining bit, 1/2" Craftsman Core Box Bit, not sure what the other loose 3 Stanley ones are. Ask any questions ships within 24 hours of payment. Please check out our other ebay sites tverdick, largeestates, largeestates2& largeestates3. Bid with confidence we have been selling with high seller ratings on ebay for years.
Double Concave Radius Cutters with Arbor 3/8"-24 at the end of the threade(Lot2)
Double Concave Radius Cutters with Arbor 3/8"24 at the end of the threade with T-Bushings(Lot of 2) Have a rust and grinding. See photos. Connection: Arbor 3/8"24 at the end of the threade Diameter of Cutter: 1-1/8" Width of Cutter: 1" Number of Teeth: 12 Hole Diameter of Cutter: 3/8"24 Arbor Shank: 5/8" Arbor Overall Lenght: 4-3/4" Quantity: 1 Connection: Arbor 3/8"24 at the end of the threade T-Bushing OD 3/4" 1/2" x ID 3/8"20 x H 21/32" T-Bushing OD 3/4" x ID 1/2" x H1/4" Arbor Shank: 5/8" Arbor Overall Lenght: 4-1/32" Quantity: 1 Thanks for taking the time to look at our item.
tarpley router bits
From my grandfather belongings. Nice Tarpley router bits 3-32 style a 2 bits, thanks for looking.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b6beb18f1-0x104-
Lot of Router bits mixed 0871-45
Lot of Router bits mixed 0871-45 Shipping Info: Weight:10 Size:16*7*7 QUESTIONS Please ask all questions 48 hour before the end of sale. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out of our brick and mortar shop in a timely manner. If in the event an item/s is purchase on eBay and it has sold ... moreout of our store, we will cancel the eBay sale and issue a full refund to the buyer. Feedback; If you are not happy with your item. Please contact us before leaving negative feedback. We want you happy with your purchase. We will work with you to make your purchase right. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. Missing parts. Used items could be missing parts, please review the description and photographs for possible missing parts. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item
-lot- 5 vtg Delta Milwaukee Router Drill Bits 474-1 475 476-3 477-7 478-1 case+1
lot- 5 vtg Delta Milwaukee Router Drill Bits 474-1 475 476-3 477-7 478-1 case+1 Fresh estate find. I think these are router bits. Shanks all marked Delta Milwaukee. Nice box. Last bit is a Butterfield Derby 3/4" Out of the same shop. Thought I'd include it even though its not a router bit. I have other carpentry/woodworking tools listed from this same shop. I have other good mechanics tools listed in-different- categories. USA Bidders- Immediate payment. Please. And that assures that your package will be promptly on its way. This is a huge help and we greatly appreciate your cooperation. We use USPS(note the significant 2014 rate increases) and FedEx(for heavier objects) We always do a genuinely better-than-necessary job packing( one less concern) and with top-quality packing materials. After payment is received we ship'Same ... moreDay' or'Next Day' another pleasant non-concern) International Bidders- Please Review THOROUGHLY! For SMALL or LIGHTWEIGHT items(under 4 pounds) items are carefully wrapped and/or boxed and then placed inside a sturdy USPS Flat Rate 9"x15" heavy cardboard envelope. This flat rate is $26.50 worldwide(to Canada $22.50) Again. Only small or lightweight objects qualify for this rate. For LARGER or HEAVIER items that do not qualify for the first alternative there are two other options: 1) Pre-approved"Calculated Shipping" using your location and the actual packaged weight) by contacting us before bidding for an accurate quote(and allowing us to add you to our pre-approved bidder list) or 2) use eBay's"Global Shipping Program" Feel free to ask us any questions. Please WAIT FOR AN INVOICE! Please Note: Import duties. Taxes and charges are not included in the item or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We've enjoyed doing this for a long time. We have a good eye for quality and buy objects t
Router Bit for Window Sash Grizzly No. C1551, Carbide
For your consideration a specialized router bit for making window sash. Grizzly brand carbide bit is functionally new with razor-sharp cutting edges. Free of corrosion except for superficial rust at end of shank apparently from storage in a wooden block. Pilot bearing free and clean. Paint virtually unblemished. If this bit has been used at all it hasn't been used much! Current retail is about $55. Photos show condition clearly. No reserve. Thanks for your interest and best luck in your bidding!
Lot of 50 Router Bits / Cutters / Counter Sinks and Bearing Parts ECT...
Lot of 50 Router Bits/ Cutters/ Counter Sinks and Bearing Parts ECT. Used condition From the estate of older gentleman. Please check out the pictures ATTENTION Please Read: Thank you for looking at my auction. Most of the items I sell are used. Before I list them I check them over but I am not an expert in any particular field. Because of how I get my items I usually do not know the history of anything I sell. I take a variety of photos and I list what I know about my items from simple testing and obvious observation. Please bid according to what you see in the pictures and read in the listing and do not assume anything more. I try to be as accurate as possible without exaggeration. Please ask questions before bidding. Please check out our other auctions Thanks.
2-Leuco 500020 -1/2 x1-5/8 x1/2 x 3-1/2 2 FL SC Upcut Spiral Wood Router-2 Bits
Lot of 2. Estate sale find. Leuco#500020 up cut spiral wood router bits-Lot of 2. Made in USA. 1/2 x 1-5/8 x 1/2 x 3-1/2. 2FL. SC. Used. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14b8101d1da-0x110-
NAP Gladu RS294, 5/8" x 5/8" x 2 1/4" x 5", Carbide, Router Bit - Resharpened
You are bidding on( 1) NAP Gladu RS294. 5/8" x 5/8" x 2 1/4" x 5" Carbide, Router Bit- Resharpened. P/N RS294. Size- 5/8" 0.6250" Shank Dia. 5/8" Flute Length- 2 1/4" OAL- 5" No. of Flutes- 2 Material- solid Carbide Finish/ Coating- Uncoated Condition- Resharpened. FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 15-R-62 Powered by SixBit's eCommerce Solution
AMANA 987 COVE PANEL RAISE CUTTER
AMANA 987 COVE PANEL RAISE CUTTER HORIZONTAL. 3-WING, CARBIDE TIPPED SHEAR FACE CUTTERS. 1-1/4" BORE EITH 1" BUSHINGS COVE PROFILE 1-1/4" BORE; 1-1/2" REVEAL; 5 1/2" OVERALL DIAMETER; 1 9/16" RADIUS C-017 RUB COLLAR
Large Mixed Lot of 24 Router Bits
Hello. Up for bid is a Large Mixed Lot of 24 Router Bits. I think most of them have not been used due to having rubber coating around most of the bits. But I know nothing about these item so they may have been used before. Selling AS-IS. Please see photos for condition. Please understand I'm not a expert on these items I sell. Items are described to the best of my ability. ALL items sold as-is with no warranty. Again please understand All SALES are final. I DO NOT offer returns or refunds of any kind. PLEASE Read listing top to bottom. EVERY one has different idea of what good used condition is PLEASE SEE photos to make your own judgment on condition of item. See ALL photos and ask questions before bidding. International buyers please note I only ship item USPS priority mail I accept primarily paypal payments. If you would like to pay ... morea different way. Please contact me prior to bidding so that we can work out a mutual agreement. All payments are due within 3 days of auction end. If multiple items are purchased, I will combine shipping upon request. Items will be shipped the next business day after payment is received. Items are sold as-is with no warranties. Items are described just as they are being sold. What you see in the pictures is what you will receive if you win the auction. All sales are final. I do combine shipping.
Professional Grade Woodworking Router Bits for Cabinet Making
Selection of professional grade woodworking router bits with 1/2" shanks for making raised panel cabinet doors: 1- 2 bit stile and rail set. 2- reversible single bit stile and rail set. 1- raised panel bit. 1- chamfer bit. 1- multiform bit.
Amana Router Bit Slotting Cutter 53410-1 1/4 KERF 3 WING ASSEMBLY
Used but cleaned and in excellent condition.
4PC AES industries 4 in the box Router bits r=2 4mm, r=3 2mm, r=4 8mm, r=6 4mm
Used As is. 4PC AES industries 4 in the box Router bits r=2 4mm. R=3 2mm, r=4 8mm, r=6 4mm. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b8f4ae465-0x111-
Delta 2 - Speed Wood Shaper Model 43-355 with extras
Moving/retirement sale. Your are bidding on a Delta shaper with mobile base with several cutters and misc. items. Please check my auctions as I will be adding items daily.
Skil router bits with wooden storage case
PR-OWNED. THAT IS IN GOOD CONDITION Skil Router Bits Comes With Wooden Storage Case THE EXTRA BIT FLOATING IN THE BOX IS MADE BY CRAFTSMAN TOOLS ALL SEEM TO BE IN GREAT CONDITION* We want Positive feedback* We want our customers 100% satisfied* We are trying to achieve FIVE STARS in all areas of customer satisfaction. We are committed to satisfaction of your purchase. If you are not satisfied with your purchase for any reason. PLEASE give us an opportunity to make it right before leaving feedback. PLEASE READ THE FOLLOWING BEFORE BUYING} DESCRIPTION: WE DO OUR BEST TO DESCRIBE EACH ITEM ACCURATELY: Often we provide additional detailed pictures. Which provide visual detail of our descriptions, showing everything included in the listing(i.e. manual, etc. It is the responsibility of the buyer to thoroughly read the description and to Look at ... moreall the Pictures. If something is not listed and/or not shown in the photos, it is not included. To the best of our ability. We provide in the description the operation, condition and functionality of the listed item. We ask that buyers accept the responsibility of their purchase. We NEVER want to mislead anyone with our descriptions. IF THERE ARE ANY QUESTIONS AT ALL. WE WOULD HOPE YOU WOULD ASK THEM BEFORE BUYING} We Welcome any and all questions and will try to RESPOND CLEARLY AND PROMPTLY. We want our buyers to be educated and HAPPY with their purchase(s) ACCEPTED PAYMENT METHODS: PAYMENT MUST BE MADE WITHIN FIVE(5) DAYS OF END OF AUCTION. PAYPAL PREFERRED TO CUSTOMERS WITH CONFIRMED ADDRESSES ONLY. PAYMENT BY: Pay Pal ONLY PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE BUYING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b8f4ae41d-0x10f-
Leuco #500014 -3/8 x 1-1/8 x 3/8x3 2 FL SC Upcut Spiral Wood Router Made in USA
Estate sale find. Leuco#500014 up cut spiral wood router bit. Made in USA. 3/8 x 1- 1/8 x 3/8x 3. 2FL. SC. Used. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b91ef31ee-0x117-
Rockwell 43-917 Carbide Tip Shaper Cutter 1/4" Straight 3/4" Hole 1/2" Bushing
Up for auction is a nice vintage Carbide Tipped Shaper Cutter by Rockwell International. Made in Japan. It looks like this cutter has only been a couple of times and is in excellent condition, despite the light surface rust. There is no wear on the tips and they are extremely sharp. Despite the surface rust, the item is 100% solid and will clean up nicely. Model# 43-917. 1/4" Straight, 3/4" Hole with 1/2" Bushing. Includes box. Purchase with confidence- I've been an Ebayer since 2005 and have a 100% positive rating.
Delta Wood Shaper Machine.
This is a used Delta wood shaping machine on a pedestal mount. The machine is electrically powered. It turns on and appears to work although I am not an expert on wood working machines. I bought it at an auction from a wood working shop. It comes with the instruction manual and other documentation. However. Please note that we make no representations as to the serviceability or any warranties, express or implied, as to this machine. As to the operation of this machine, all I can tell you is that it turns on when plugged in. The asking price reflects that. It also has the level mounts that you can attach to the side rails to ensure the machine is properly leveled. This machine is quite heavy so please contact me for a shipping quote. Please note that the price does not include any shipping. For buyers in the Las Vegas or Pahrump. NV areas, ... morefree local delivery is included. For those buyers outside of that area, it will have to be shipped. You may make those arrangements yourself or I will do it for you but please note that this machine is quite heavy so delivery might include a forklift or a dock. To give you a rough idea of the shipping cost. We live in Nevada and a prospective buyer in Rochester, NY in the other side of the country asked for a shipping quote and that was $245. That might give you a comparison. But if you are interested message me with your zip code and I will get you a quote. That shipping quote was through UPS Shipping. Please note that the machine is being sold"as is" and we do not accept any returns. The owner's manual and other documentation is included and tells you how it functions. Etc. Please message me with any questions.
1/2" Shank Moulding Router Bits
I am selling(3) large 1/2" shank moulding router bits. One is a large round over bit. One is a bullnose bit, and the other looks like it is for cutting chair rail. I placed my tape measure with the bits for a representation of their size. Please ask any questions before bidding!
13 assorted ROTARY FILE CUTTING BITS 1/4" shank vintage tools 275h
Up for sale is this old vintage Rotary File Cutting Bits ~ assorted set of 13 ~ 1/4" shank. used. We often have more than 6 pictures with our listings. to see the 7th-12th picture. Please use the scroll bar to the right of the small pictures Please. See the pictures for the condition of this item. You may find something in the pictures that we didn't mention in the description, as we sell mostly older items. We do our best to show the defects, but sometimes they are missed. If you have questions, please ask, we respond frequently to our emails. Michigan Residents will be charged 6% Sales Tax. Check our feedback comments! We want to give you five star service. Please give us 5 star feedback or contact us. Policies: 1. We combine shipping. If you are buying more than one item. Please wait for your invoice to pay. If shopping over more ... morethan one day, please drop us a note to let us know you are bidding on more items. We will send a new invoice each evening. We are professionals and each of our packages will be shipped with USPS(smaller ones) that have a delivery confirmation code. Check in your"My eBay" section to see when you package has been sent, we usually send the next day, but please give is 48 hours to send after payment has been made. 2. In order to protect our buyers as well as ourselves. We only ship to the address on the paypal transaction. Please do not ask us to ship to a different address. 3. Please do not ask us to change our auctions to do a buy it now. In order to be fair to all our clients. We do not do this. Please participate in our auction. 4. Please look below the photos in our auction to see if we have answered any buyer questions that may add to the description of the item. International Shipping Information: 1. Please ask for International Shipping Prices PRIOR to bidding and check in the auction to see if this item will be shipped internationally. 2. Any item that weighs 4 pounds or more and/ or sells for $50 or more. MUST be sent with Priority Mail to ensure a tracking co
SIMONDS ROTARY FILE CUTTING BITS H95M H55M H14M 1/4" shank NOS 273h
Up for sale is this old vintage Simonds Rotary File Cutting Bits ~ H95M. H55M, 2 are H14M ~ 1/4" shank. not used. Original boxes we often have more than 6 pictures with our listings. to see the 7th-12th picture. Please use the scroll bar to the right of the small pictures Please. See the pictures for the condition of this item. You may find something in the pictures that we didn't mention in the description, as we sell mostly older items. We do our best to show the defects, but sometimes they are missed. If you have questions, please ask, we respond frequently to our emails. Michigan Residents will be charged 6% Sales Tax. Check our feedback comments! We want to give you five star service. Please give us 5 star feedback or contact us. Policies: 1. We combine shipping. If you are buying more than one item. Please wait for your invoice ... moreto pay. If shopping over more than one day, please drop us a note to let us know you are bidding on more items. We will send a new invoice each evening. We are professionals and each of our packages will be shipped with USPS(smaller ones) that have a delivery confirmation code. Check in your"My eBay" section to see when you package has been sent, we usually send the next day, but please give is 48 hours to send after payment has been made. 2. In order to protect our buyers as well as ourselves. We only ship to the address on the paypal transaction. Please do not ask us to ship to a different address. 3. Please do not ask us to change our auctions to do a buy it now. In order to be fair to all our clients. We do not do this. Please participate in our auction. 4. Please look below the photos in our auction to see if we have answered any buyer questions that may add to the description of the item. International Shipping Information: 1. Please ask for International Shipping Prices PRIOR to bidding and check in the auction to see if this item will be shipped internationally. 2. Any item that weighs 4 pounds or more and/ or sells for $50 or more. MUST be sent with Priori
leitz 042641 throught -hole drills (solid carbide )2 bits
leitz 042641 throught-hole drills(solid carbide)
TREND RBT/PLATE ROUTABOUT TEMPLATE & 7 SPACER RINGS RBT-PLATE
TREND RBT/PLATE ROUTABOUT TEMPLATE& 7 SPACER RINGS used/ no longer required( no router bit) Call by& have a look we are in South London SW12 0NA
Trend T-Tech 2050W Router
Trend 2050W T-Tech Router. Machine works but sounds as though Carbon Brushes may have worn thin. Any other information don't hesitate to call. 01709 581911
ROUTER AND ROUTER BITS, POWER DEVIL 850W, 2 BOXES OF BITS ALL ARE 1/4" SHANK.
POWER DEVIL ROUTER AND TWO BOXES OF BITS. ONLY USED ONCE TO ROUND OFF MDF EDGES. 9000- 28000 RPM COLLET SIZES 6.3- 8mm PLUNGE ACTION VACUUM DUST EXTRACTION FACILITY TEMPLATE PARALLEL GUIDE POWER SWITCH LOCK ON. TOTAL WEIGHT IS OVER 7KGS. CAN POST, WILL POST, BUT COLLECTION IS PREFERRED. DELIVERY COST IS ESTIMATED. MAY NOT BE THAT MUCH OR COULD COST MORE, WILL TRY TO GET A CLEARER ESTIMATE AND ENTER LATER.
NU-TOOL 15 PIECE 1/4'' ROUTER BIT SET IN CASE RB1514
NU-TOOL 15 PIECE 1/4' ROUTER BIT SET IN CASE RB1514 DAMAGE TO BOX LID CONTENTS( ONE MISSING) AND CONDITION AS PER PHOTOS
Very nice Freud carbide tipped router bit kit
These router bits are in very good condition. And priced well to sell!
Mixed lot of router Bits And Grinding Wheels - 15 Pieces
A mixed lot of bits and wheels pulled from machine shop. Not sure of exact use. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14bb893c264-0x118-
Freud Router Bit A40-114 Chamfer 1/2"Shank, PowerTool Cutter Trim Shape(FR15)
UP FOR CONSIDERATION: Freud Router Bit A40114 Chamfer Bit 1/2" Shank. 1 3/4" Overall Diameter, 1/2" Bearing Diameter, 45 Degree Angle, 2 9/16" overall length. Recently purchased from a Local Businessman going out of business. These are in Great Used Condition unless otherwise noted above- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to me for a full refund of the winning bid and shipping within ... morestated timeframe(usually 14 days) Returning buyer pay for shipping back to me. Feedback: Our goal is satisfied customers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Freud Router Bit FC-002 Forstner 1/4"Shank, PowerTool Cutter Trim Shape(FR12)
UP FOR CONSIDERATION: Freud Router Bit FC-002 Forstner Carbide Bit 1/4" Shank. 3/8" Cut Diameter, 3 7/16 overall length. Recently purchased from a Local Businessman going out of business. These are in Great Used Condition unless otherwise noted above- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to me for a full refund of the winning bid and shipping within stated timeframe(usually 14 days) Returning ... morebuyer pay for shipping back to me. Feedback: Our goal is satisfied customers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Freud Router Bit 12-156 Double Flute 1/2"Shank, PowerTool Cutter Trim Shape(FR8)
UP FOR CONSIDERATION: Freud Router Bit 12-156 Double Flute Bit 1/2" Shank. 3/4" Cut Diameter, 1 1/2" Depth Cut Some Surface Rust on Shank. Blades are sharp and there is one nick in one blade towards the bottom(see pic) Recently purchased from a Local Businessman going out of business. These are in Great Used Condition unless otherwise noted above- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to ... moreme for a full refund of the winning bid and shipping within stated timeframe(usually 14 days) Returning buyer pay for shipping back to me. Feedback: Our goal is satisfied customers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Freud Router Bit 40-104 Chamfer 1/4"Shank, Power Tools Cutter Trim Shape(FR6)
UP FOR CONSIDERATION: Freud Router Bit 40-104 Chamfer Router Bit 1/4" Shank Recently purchased from a Local Businessman going out of business. These are in Great Used Condition unless otherwise noted above- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to me for a full refund of the winning bid and shipping within stated timeframe(usually 14 days) Returning buyer pay for shipping back to me. Feedback: Our ... moregoal is satisfied customers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Freud Router Bit 34-116 Round Over 1/4"Shank, Power Tools Cutter Trim Shape(FR5)
UP FOR CONSIDERATION: Freud Router Bit 34-116 1/4" Shank Some Surface Rust on Shank. Blades are sharp with no nicks. Recently purchased from a Local Businessman going out of business. These are in Great Used Condition unless otherwise noted above- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to me for a full refund of the winning bid and shipping within stated timeframe(usually 14 days) Returning buyer pay ... morefor shipping back to me. Feedback: Our goal is satisfied customers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Freud Router Bit 34-127 Rounding Over, Power Tools Cutter Trim Shaper (FR1)
UP FOR CONSIDERATION: Freud Router Bit#34-127 1/2" Shaft or Shank Some surface wear on the shaft. Blades are sharp with no nicks. Recently purchased from a Local Businessman going out of business. These are in Great Used Condition unless otherwise noted above- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to me for a full refund of the winning bid and shipping within stated timeframe(usually 14 days) Returning ... morebuyer pay for shipping back to me. Feedback: Our goal is satisfied customers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Festool Router Bit 491009 HW 17.1x9x8 R2 Bit, Power Tools Accessory (F2)
UP FOR CONSIDERATION: Festool Router Bit 491009 HW 17.1x9x8 R2 n. max 27000 e0.1 MAN 031 E29 Recently purchased from a Local Businessman going out of business. These are in Great Used Condition- Check out my other Festool Bits. Freud Bits, Boxes, Saw Blades and More from the same estate! I will be happy to combine shipping if you purchase more than one. Thanks for looking! Check out my other items! Be sure to add me to your favorites list! Feel free to email me with questions. Payment Options: PayPal Only Please Shipping Terms: Winning Bidder pays cost plus shipping. Refunds. Returns: If you win this item and upon receiving it are not 100% satisfied, you may return it to me for a full refund of the winning bid and shipping within stated timeframe(usually 14 days) Returning buyer pay for shipping back to me. Feedback: Our goal is satisfied ... morecustomers. If you are not pleased with your purchase. We want to know about it. Our feedback displays a level of consistent high quality items at affordable prices, safe and secure packing, fast shipping, timely communication and overall excellent service. We would appreciate your positive feedback and all 5's on the four detailed seller ratings(DSR's) If you feel that we have not earned the highest ratings, give us a chance to fix the issue before leaving feedback.
Templaco Tools Bore master with carbide tipped spur bits # BJ-114
a used Templaco Tools Bore master with carbide tipped spur bits# BJ 115. All items are in good working condition and the kit comes with what you see. Please see photos for condition of this item. I will be happy to answer questions if I am able to about the item. Payment or payment arrangements must be made within 7 days of Purchase. I will ship UPS USPS Priority or Fed Ex from 94501 unless other arrangements are made. Please provide a physical address because UPS does not normally ship to P.O. boxes. If you are in the market for more tools please check out my! Alert! ALERT! ALERT! Please be aware of the fact that scam artists are everywhere and even though eBay tries to contain this problem they are still lurking. Recently I sold an item and the buyer received an email with instructions to send the payment to a certain address. This email ... morewas not sent by me. This smart buyer contacted me and I told him it was a spoof and to send a copy of the scam letter to spoof@ebay.com so if you win an auction from me I prefer Pay Pal, please do not respond to an email from me requesting that you send the item by wire transfer or any other method and please forward the email to eBay. Thanks!
ROCKWELL #43-911, GLUE JOINT CARBIDE TIPPED SHAPER 3/4" hole with 1/2" Bush
ROCKWELL INTERNATIONAL CAT. NO. 43-911 GLUE JOINT CARBIDE TIPPED SHAPER CUTTER 3/4' HOLE. 1/2' BUSHING. IN VERY GOOD CONDITION. RAZOR SHARP. LOOK AT THE PICTURES.
ROCKWELL #43-902 Panel Raising Carbide Tipped, 3/4" hole with 1/2" Bush
ROCKWELL INTERNATIONAL CAT. NO. 43-902 PANEL RAISING CARBIDE TIPPED SHAPER CUTTER 3/4' HOLE WITH 1/2' BUSHING. USED.IN VERY GOOD CONDITION. RAZOR SHARP. LOOK AT THE PICTURES. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14bc045a694-0x114-
FREUD 97-106 3 pc BEVEL RAISED PANEL WITH BACKCUTTER BIT SET IN CASE
UP FOR AUCTION. WE HAVE A FREUD 97-106 3 PC. BEVEL RAISED PANEL WITH BACKCUTTER BIT SET. SET IS USED BUT ARE IN GREAT CONDITION. BLADES ARE SHARP AND ARBORS ARE STRAIT. PLEASE VIEW PHOTOS TO SEE CONDITION. Application: Combines our most popular rail and stile bit sets with one of our exclusive Quadra-Cut™ Raised Panel Bits* All bits have 1/2" shanks and are designed to be used on 3/4" stock* Includes attractive wooden storage box* Cuts all composition materials. Plywoods, hardwoods, and softwoods* Use on table-mounted portable routers with 1/2" shank Set Contents Overall Dia. Small Dia. Carbide Height Shank Dia. Overall Length Rail& Stile Bit Set(99-260) 1-11/16" 1-5/16" 11/16" 1/2" 3" Quadra-Cut™ Panel Bit(99-566) 3-1/2" 1" 1/2" 3" WHAT IS INCLUDED: RAIL ROUND OVER COPING CUTTER#99-260* ... moreSTILE ROUND OVER STICK CUTTER# 99-260* PANEL 3-1/2” BEVEL RAISED PANEL BIT WITH BACKCUTTER#99-566* WOODEN STORAGE CASE WITH PLASTIC COVER NO RESERVE! Trading Post Pawn. Inc. is dedicated to providing superior customer service and accuracy in product description! Give us a try, you won't be disappointed! PLEASE NOTE ALL ITEMS ARE AVAILABLE IN OUR STORE AND AUCTION MAY END EARLY DUE TO SALE IN STORE. WE WILL NO LONGER DO ANY"BID RETRACTIONS" MEANING IF YOU BID ON AN ITEM. WE WILL NO LONGER ALLOW BUYERS TO REQUEST TO BE LET OUT OF THERE BID. IF YOU BID, YOUR BID WILL STAY AND IF YOUR BID IS THE HIGHEST BID, YOU WILL BE REQUIRED TO PAY! ANY BIDS FROM BUYERS WITH LESS THEN 2 PURCHASES AND 2 POSITIVE FEEDBACKS MUST CONTACT US BEFORE BIDDING OR THEIR BID WILL BE DROPPED! WE WILL ONLY SHIP TO THE ADDRESS LISTED WITH eBay/PayPal. WE WILL NOT SHIP TO ANY OTHER ADDRESS SO DO NOT BID OR BUY UNLESS YOU HAVE THE CORRECT SHIPPING ADDRESS LISTED WITH eBay/PayPal BECAUSE WE WILL NOT SHIP TO ANY OTHER ADDRESS OTHER THEN THE ONE LISTED SO PLEASE DO NOT ASK! DEALS-AT-TRADING-POST(TRADING POST PAWN. INC. Our return policy is straight forward and customer friendly. We want y
THIRTY FOUR ROUTER BITS, CASE & ACCESSORIES
THIRTY FOUR ROUTER BITS. CASE& ACCESSORIES MOSTLY NEW BITS SOME USED A RBOR 9-2589(3 PILOT 3/16 PILOT 5/16(2) PIOLT 7/16.437 PILOT 7/16 PLIOT 23/32.712 PILOT 27/32.830 1/2” BALL BEARINGS(2) STRAIGHT BIT VM 1/2 9-25523 STRAIGHT BIT VM 3/8 9-25522 STRAIGHT BIT VM 1/4 9-25521 STRAIGHT BIT VM 1/8 9-2553 END TAPER BK STRAIGHT BIT VM 3/4 9-25529 V GROOVE BIT VM 1/2 9-2578 V GROOVE BIT VM 17/32 DOVETAIL BIT ½ 9-25531 VEE CARVING BIT ¼& 60DRGREE 9-25545 SPECAL GROUND FOR MODEL A FORD WOODY FINGER JOINTS VEINING ROUND BIT 1/4 9-25594 VEINING ROUND BIT 7/32 9-25593 VEINING ROUND BIT 3/16 9-25592 VEINING ROUND BIT 1/8 9-25559 VEINING ROUND BIT 7/32 9-25593 RADIUS BLACK DECKER#59043 OGEE BIT VM-G6 3/16 25585 ROMAN GEE BIT VM-L5/32 25587 ROMAN GEE BIT VM-A7 ¼ 25588 CORNER ROUNDING VM- J1 1/4 25563 CORNER ROUNDING VM- B2 3/8 25562 ... moreCORNER ROUNDING VM- F78 1/2 1/4 25561 CHAMFERING VM-L5 ½ 25589 RABBETING BIT VM-12 5/1625881 COVE BITVM-A3 ½ 25571. Package will be shipped to you Priority Mail from Zip 06783.
"FREUD" CABINET BIT SET 3 PIECE CABINET DOOR MAKING ROUTER BIT SET 1/2" SHANK
FREUD" CABINET BIT SET 3 PIECE CABINET DOOR MAKING ROUTER BIT SET 1/2 SHANK This a sweet Freud 3 piece Cabinet Making Router Bit Set. Used. About Freud's Industrial Bits Serious woodworkers choose serious accessories. They choose Freud. The Freud name equals quality. Precision and craftsmanship. Freud router bits feature TiCo Hi-Density Carbide for maximum cutting life and are individually balanced; providing a cut above the rest. When you’re looking for a serious router bit. Look for Freud red. About This 3-Piece Cabinet Bit Set The Freud 3-piece cabinet bit set combines the popular rail and stile bits with a 3-1/2-inch diameter traditional raised panel bit. This set allows the woodworker to build doors with true mortise and tenon construction for rock-solid joints that last a lifetime. These MicroGrain carbide bits cut all composition ... morematerials. Plywood, hardwood, and soft wood. They feature an anti-kickback design for safety, multi-axis grinding for burn free cuts, a Perma-shield coating to resist heat, and a shear angle design that produces a truly superior finish. This set is designed for use on 1/2-inch shank table-mounted router with 3/4-inch stock, and it includes the rail and stile bit set(99-260) and the 2+2 raised panel bit(99-515) plus an attractive wooden storage box. Applications Designed for use with a 1/2-inch shank table-mounted router with 3/4-inch stock. These bits cut all composition materials, plywood, hardwood, and soft wood. What's in the Box 3-1/2-inch raised panel bit. Freud 99-260 rail and stile bit set, and wooden storage box. Comes as shown. Ships at 5 lbs. Please Email With Any Questions Before You Bid Or Order. We Try To Describe Each Item As Accurately As Possible. And Want The Bidder To Be Confident That The Item Is What They Want. Our Feedback Record Proves That We Are Truste
PILE OF CARBIDE TIPPED INDUSTRIAL WOOD SHAPER CUTTERS
DESCRIPTION: USED. A COUPLE MIGHT BE NEW, CARBIDE TIPPED SHAPER CUTTERS. THE ARBOR SIZES ARE: 1/2; 3/4 AND 1 1/4. THESE CAME OUT OF A FACTORY THAT MADE PARTS FOR INDUSTRIAL OFFICE FURNITURE. 2 OF THE CUTTERS STILL HAVE COSMOLINE ON THEM. A COUPLE OF THE CUTTERS HAVE CHIPPED CARBIDE. ONE OF THE CUTTERS HAS A SCREW THAT HAS BROKEN OFF INSIDE OF IT. LOOK AT THE PICTURES THE LISTING IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE ... moreEND OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for addit
3/8" Roundover 2 Wing Carbide Insert Router Bit 3/4" Shank Set of 3
3/8" Round Over 2 Wing Carbide Insert Router Bit Set of 3 3/4" Shank with extra inserts Hickory Tool Company/Dehart Tooling
ATLAS ROUTER BITS, 5/16" SHANKS, 11 PIECE SET, NEW & USED
11 router bits. Some used, some new. All sharp& in good condition. Commercial quality with 5/16" shanks.
Carbide Tipped Shaper Cutter Wedge Router Bit. FC13146
Shaper Cutter ~ very little wear ~ some very small nicks
13 Piece Mixed Router Bit Set Set ~Molding Shapes ~1/2" Shank ~Roller Bearings
♦ ♦. ♦. ▬ 13- Lot Wood Cutting Router Tips ▬ ▬ 1/2 Shank Diameters ▬ FEATURES: Large/ Strong/ Some with Roller Bearing Router bits. Carbide tips- 2 or 3 blades on each bit. USA made- high quality FREUD& other makers. From Retired Fine Local Carpenter- these tools are all high quality. NOT what he calls, Asian Butter Steel" Shown and described LEFT TO RIGHT. All Have 1/2" SHANK- 13mm. Bits with ROLLER BEARINGS are noted below. NOTE: the sizes listed are the LARGEST Cutting DIAMETER on each bit. TOP ROW: 1& 3/8" Circular Concave cut(makes convex bead) = No Maker's Name 1& 11/16" = Circular Concave cut(makes convex bead) = FREUD#82-118 = NEW 1& 11/16" = Circular Concave cut(makes convex bead) = FREUD#82-118 = USED 1" = hemispherical plunge router tip = YELLOW ="Carb-Tech# 02-08" 2" ... more= Round Quarter Circle Edge = ROLLER BEARING = YELLOW ="Carb-Tech# 02-03" 1.5" x 5/8" Square edge = YELLOW ="Carb-Tech# 99-34" = NEW in the PACKAGE Includes 7 roller bearings for use with Carb-Tech Tips. SECOND ROW: 3/4" Diameter. 1/2" Tall Angle edge Bit = ROLLER BEARING = No maker. 1& 3/16" Round and Square Edge ROLLER BEARING bit = No Maker. 1" = 26.4mm Dia. 1& 1/4" Square Cut Edge = ROLLER BEARING bit ="FREUD 32-102" 7/8" Triple Groove Edge Router Bit = ROLLER BEARING ="AMANA TOOL 54217" 7/8" Diameter. 1/2" Tall"Shoe" Curved Edge Router Bit = ROLLER BEARING = No name. TWO: 2" Diameter Slot. Dato or Groove Cutting Bits ="DML# 31496" NOTE: One is complete with washers and support collars. The other has the shank. Bit and nut, but no washers. CONDITION: Average 8.75 out of 10- Very Good for current use. They all seem quite sharp. If not clean. Several are NEW or UNUSED. There are some with small amounts of surface rust showing. All Bearings roll. =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- ♦♦♦♦ Check out my!
14 Piece Router Bit Set Boring Set ~Hole Chisel Flat Bottom 3/8 Shank
♦ ♦. ♦. ▬ 14- Lot Wood Cutting Router Tips ▬ ▬ 3/8 Shank Diameters ▬ FEATURES: Sharp Pyramid point starting and centering point on each. All have two side cutting chisel plus two bottom cutting chisels = these are'bottom cleaning' bits. Unknown Maker- No maker's marks. From Retired Fine Local Carpenter- these tools are all high quality. NOT what he calls, Asian Butter Steel" Shown and described LEFT TO RIGHT. All Have 3/8" SHANK- 10mm- with a couple of exceptions noted below. NOTE: the sizes hand written on the Photo Background Paper are quite accurate. Measured by caliper. METRIC diameters were also measured for each: and are listed here: TOP ROW: 2" Diameter = about 51mm 1& 7/8" = 1.875" = 48mm Dia. 1& 3/4" = 1.75" = 45mm Dia 1& 5/8" = 1.625" = 42mm Dia. 1& 1/2" ... more= 1.5" = 38mm Dia. 1& 3/8" = 1.375" = 35mm Dia. SECOND ROW: 1& 1/4" = 1.25" = 32mm Dia. 1& 1/8" = 1.125" = 29mm Dia. == NOTE: 5/16" Shank 1" = 26.4mm Dia. 7/8" =.875" = 22.4mm Dia. == NOTE: 5/16" Shank 3/4" =.75" = 19mm Dia = TWO ROUTER BITS NOTE: the Longer one has 3/8" Diameter Shank. the other has 5/16" Shank. 1/2" = 13mm Dia. == NOTE: 5/16" Shank 3/8" =.375" = 10mm BONUS ITEM INCLUDED IN THIS SALE: To make this set more complete- to replace the missing 5/8" bit in the above listing. Timberline#660-120(formerly Amana) carbide tipped- 4 cutting blade router bit. 5/8" Diameter cut. 3/8" Shank New in the package CONDITION: Average 8.75 out of 10- Very Good for current use. They all seem quite sharp. If not clean. There are some with small amounts of surface rust showing. =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- ♦♦♦♦ Check out my! ♦♦♦♦ Mostly collectible and vintage or antique articles. However we do carry some other industrial equipment items, if they remain unsold. =- =- =- =- =- =- =- =- =- =- =- =- =-
15 Piece Router Bit Mixed Set ~ Fancy Molding Shapes ~ 1/4" Shank ~ Ball Bearing
♦ ♦. ♦. ▬ 15- Lot Wood Cutting Router Tips ▬ FEATURES: Unknown Makers- made by different makers. From Retired Fine Local Carpenter- these tools are all high quality. NOT what he calls, Asian Butter Steel" Shown and described LEFT TO RIGHT. All Have 1/4" Shank unless otherwise noted. TOP ROW: Bearing Type = 1.25" Diameter Nosing = 2.25" Long Bearing Type = 1.25" Diameter Ogee Edge = 2.125" long. Bearing Type = 1.125" Diameter Concave = 2.25" Long Bearing Type = 1.125" Diameter Round Nosing = 2.5" Long Bearing Type = 1.25" Diameter Ogee Edge = YELLOW = 2.5" Long Bearing Type = 1" Diameter Bead Edge Nosing = RED = 2.5" Long Bearing Type =.8" Diameter Round& Square Nosing = 1.75" Long SECOND ROW: 5/8" Tube Boring Bit = 2.125" Long 5/8" Tube Boring ... moreBit = 2.125" Long = NOTE: this has a broken cutting tyne. Probably has no good use. 3/8" Tube Boring Bit = 2.125" Long 3/4" Ball Bit- spherical = 2.125" Long 7/8" Diameter Bead Edge Bit = 2.25" Long AMANA 48100 New Bit in plastic = Deep Groove cutter. NOTE: this bit has a 3/8" Shank- NEW. 1/4" inside Diameter CHUCK- Female threads to attach to a router seem to be about 1" BONUS ITEM INCLUDED IN THIS SALE: A very nice wood box to hold the router bits: It's made from solid wood in several species. Measures 7" long. 4.5" front to back. 2.5" tall. Nice simple clasp and hinges. Velvet lined bottom surface. CONDITION: Average 8.5 out of 10- Good for current use. They all seem mostly sharp. If not clean. Some seem totally unused. One new bit still has'melt on plastic' coating. One bit is broken(a tube bit- see note above) All bearings turn. =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- =- ♦♦♦♦ Check out my! ♦♦♦♦ Mostly collectible and vintage or antique articles. However we do carry some other industrial equipment items, if they remain unsold. =- =- =- =- =- =- =- =-
WOODTEK CARBIDE TIPPED ROUTER BIT SET - 1/2" SHANK - 66 PIECES
This includes s a wide variety of shapes and sizes. I will gladly ship multiple items together as long as it is safe to do so.
Craftsman Shaper Adaptor &Arbor ,Shaper Collar & Shaper Cutter
1) craftsman#2483 shaper adaptor.1) craftsman 1/2" shaper arbor(1) 2367 shaper collar made USA(1) shaper cutter-like new Please see photos for condition and ask any question you may have.Not my specialty. Arbor looks like it might have been used. Selling all items as being used. But most probley never used. PAYMENT IS DUE WITHIN 48 HOURS AFTER THE CLOSE OF THE AUCTION. PAYPAL IS THE CHOSEN METHOD OF PAYMENT. I SHIP ON TUESDAY& THURSDAY AND ONLY DOMESTICALLY. INSURANCE IS REQUIRED AND IS PAID BY THE BUYER. THE ONLY EXCEPTION TO THIS IF THE SELLING AMOUNT IS WITHIN THE PARAMETERS COVERED BY FLAT RATE OR OTHER SUCH SHIPPING METHODS. IF INSURANCE IS NOT COVERED BY AFORE MENTIONED SHIPPING. PLEASE WAIT FOR AN INVOICE BEFORE PAYING, OTHERWISE THE ITEM WILL NOT BE SHIPPED. RETURNS. THIS IS SUCH A TICKLISH AREA. I DO MY BEST TO REPRESENT ... moreMY ITEMS AS ACCURATELY AS CAN BE, WITH PICTURES TO SHOW THE CONDITION. ALL OF MY SALES ARE INDEED FINAL, BUT I DO WANT TO PLEASE THE CUSTOMER. HAVING SAID THAT, IF YOU ARE SERIOUSLY UNHAPPY WITH ANY OF MY ITEMS, PLEASE CONTACT ME DIRECTLY. IF YOU NEED MORE PICTURES OR HAVE ANY QUESTIONS. PLEASE CONTACT ME. THANK YOU FOR SHOPPING PLEASE REMEMBER TO LEAVE FEEDBACK. AND I WILL DO THE SAME.
Crsftsman Shaper Cutter
Craftsman shaper cutter not sure of# Not same as box. Cutter looks good may need to be sharpened. Please see Pictures for shape& condition. PAYMENT IS DUE WITHIN 48 HOURS AFTER THE CLOSE OF THE AUCTION. PAYPAL IS THE CHOSEN METHOD OF PAYMENT. I SHIP ON TUESDAY& THURSDAY AND ONLY DOMESTICALLY. INSURANCE IS REQUIRED AND IS PAID BY THE BUYER. THE ONLY EXCEPTION TO THIS IF THE SELLING AMOUNT IS WITHIN THE PARAMETERS COVERED BY FLAT RATE OR OTHER SUCH SHIPPING METHODS. IF INSURANCE IS NOT COVERED BY AFORE MENTIONED SHIPPING. PLEASE WAIT FOR AN INVOICE BEFORE PAYING, OTHERWISE THE ITEM WILL NOT BE SHIPPED. RETURNS. THIS IS SUCH A TICKLISH AREA. I DO MY BEST TO REPRESENT MY ITEMS AS ACCURATELY AS CAN BE, WITH PICTURES TO SHOW THE CONDITION. ALL OF MY SALES ARE INDEED FINAL, BUT I DO WANT TO PLEASE THE CUSTOMER. HAVING SAID THAT, IF YOU ARE ... moreSERIOUSLY UNHAPPY WITH ANY OF MY ITEMS, PLEASE CONTACT ME DIRECTLY. IF YOU NEED MORE PICTURES OR HAVE ANY QUESTIONS. PLEASE CONTACT ME. THANK YOU FOR SHOPPING PLEASE REMEMBER TO LEAVE FEEDBACK. AND I WILL DO THE SAME.
Shaper Cutter # Ls-28
Shaper cutter# LS-28 used but look good may need to be touched up. Fits 1/2" spindle. Please see photos for Shape& condition. PAYMENT IS DUE WITHIN 48 HOURS AFTER THE CLOSE OF THE AUCTION. PAYPAL IS THE CHOSEN METHOD OF PAYMENT. I SHIP ON TUESDAY& THURSDAY AND ONLY DOMESTICALLY. INSURANCE IS REQUIRED AND IS PAID BY THE BUYER. THE ONLY EXCEPTION TO THIS IF THE SELLING AMOUNT IS WITHIN THE PARAMETERS COVERED BY FLAT RATE OR OTHER SUCH SHIPPING METHODS. IF INSURANCE IS NOT COVERED BY AFORE MENTIONED SHIPPING. PLEASE WAIT FOR AN INVOICE BEFORE PAYING, OTHERWISE THE ITEM WILL NOT BE SHIPPED. RETURNS. THIS IS SUCH A TICKLISH AREA. I DO MY BEST TO REPRESENT MY ITEMS AS ACCURATELY AS CAN BE, WITH PICTURES TO SHOW THE CONDITION. ALL OF MY SALES ARE INDEED FINAL, BUT I DO WANT TO PLEASE THE CUSTOMER. HAVING SAID THAT, IF YOU ARE SERIOUSLY ... moreUNHAPPY WITH ANY OF MY ITEMS, PLEASE CONTACT ME DIRECTLY. IF YOU NEED MORE PICTURES OR HAVE ANY QUESTIONS. PLEASE CONTACT ME. THANK YOU FOR SHOPPING PLEASE REMEMBER TO LEAVE FEEDBACK. AND I WILL DO THE SAME.
GRAFTSMAN SHAPER/ROUTER AND CUTTING BITS
CRAFTSMAN ROUTER-SHAPER AND BITS. USED. SEARS ROEBUCK& CO. SIMPSONNS- SEARS LIMITED. MODLE# 11323940 MGF 8/71. 1/2 H MOTOR. IT MAY BE OLD, BUT THIS SHAPER KICKS A$^& IT SAT AROUND MORE THAN IT WAS EVER USED THE POWER CORD SHOULD BE REPLACE. DREWS TO MUCH POWER STARTING UP. BUT WORK AAA GRATE. THERES 8 BITS THAT COMES WITH IT TWO OR THREE NEED SHARPING. THERE ARE NO CHIPS, OR ANYTHING WRONG WITH THEM. THIS IS A GOOD TOOL. AND ITS BUILT TO LAST. THE WAY THERE SUPPOST TO BE.
B&Q ROUTER BIT SET AS PER PICTURE`S VERY GOOD WELL WORTH A LOOK
B& Q ROUTER SET AS PER PICTURES NOT 100% SURE IF I EVER USED ANY OF THEM YOUR MORE THEN WELCOME TO COME AND VIEW THEM BEFORE BUYING PLEASE CHECK OUT MY OTHER ITEMS THANKS FOR LOOKING
Complete set of Delta cutters for interior and exterior doors - 42-000
Complete set of carbide cutters to make 1-3/8" interior doors and 1-3/4" entry doors. Eight pieces included(rub bearing 42-122 sold separately) In excellent condition and in original packaging. Includes 1/4" and 1/2" x 5/8" tongue and groove cutters for mission style doors.
Shaper cutter - Delta 42-012 flat raised panel cutter
Flat raised panel shaper cutter in good condition with 3/4" bore. In original packaging.
Shaper cutter - Grizzly C2069 curved raised panel shaper cutter
Curved raised panel shaper cutter in good condition with 3/4" bore. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14beb317d2d-0x106-
Shaper Cutter - LRH K1421
Shaper cutter in good condition with 1" bore. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14beb317d75-0x116-
Shaper Cutter - Elite Tools #8586
Shaper cutter recently sharpened with 3/4" bore. Check for a thorough description. In excellent condition.
Templaco Tools Bore Master Model BJ-115 C3
Here is a used Templaco Tools Bore master with carbide tipped spur bits. Model#BJ-115, all items are in great working condition and the kit comes with what you see. Listed as used, but in Like-New condition.
Two Flutes with Bearing 1/2" (Slot cutters & Assemblies)
I believe that these were used once. I do not know much about them but think that they go together as a set.
Rub Collars Machining
this is a used item in very good condition and works excellent. It has some minor surface rust. 100% intact
Porter cable router colletswith router bits!
1/2 and 1/4 inch collet for porter cable routers. Pics of actual items. Bits are in good condition.
Amana 49120 r 3/4 1/2 shank router bit + onsrud spiral bit
Onsrud 6- 123 me 3/8 very good condition retail s for $65.00 Amana cove router bit mint or like new condition retails for $75.00. Great deal don't miss out!
Freud 96-102 8 Piece Dovetail & Straight Router Bit Set 1/2" Shanks Incra Jig
This set is in excellent. Barely used condition. $11.30 for priority mail, Paypal only.
Solid Carbide Burrs / Router Bits
5/16. 2- 1/4, 1/8 2- 3/32 6 Solid carbide burrs. Lightly used if at all.
Endmill Milling Cutter Lot - 6 bits
Up for auction is a LOT of NEW metal/woodworking bits for ndMill Milling/ Cutting Milling. Bits have slight oxidation/see photos. NEW- Never been used NOS- New Old Stock. email for any questions.
Pit Bull CHIFRB15 1/4-Inch Router Rounter Bits Bit Wooden Box Complete 15 Pc Set
Pit Bull CHIFRB15 1/4-Inch Router Rounter Bits Bit Wooden Box Complete 15 Pc Set. Pre-owned but solid condition. Detailed pictures provided. Thanks for looking.
G-SHOCK - DW-6620-6 (a.k.a Purple Scorpion) - Vintage/Rare
This is a Casio G-Shock DW-6620-6. Its production ended in 1994. The watch is in excellent condition however there is a tiny scratch which could barely be seen on the crystal right underneath"20 BAR" marking. The bands are in like new condition with no yellowing whatsoever. The watch also features a really nice custom scorpion back light. This a NO RESERVE auction and is starting at only $1.00. No"negative" or"zero" feedback bidders. Thank You and Happy bidding. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
5 ~ Milwaukee CARBIDE ROUTER BIT & LAMINATE TRIMMER BITS Assorted Made in USA.
5- Milwaukee carbide router& laminate trimmer bits 1/4” shank all bits are made in USA. See photos for details. New Carbide Tipped#48-23-5090 5/8” Straight Used in very good condition Carbide Tipped#48-23-5070 3/8” Straight#48-23-6700 Flush Laminate Trimmer#48-23-6715 Combination Straight 22 deg Bevel Trimmer 45 deg. Chamfer ITEM DESCRIPTION is as complete and accurate as I could make it. If you need additional information or photos, please contact me. SHIPPING COST is for the well-packed auction item per ebay calculator. I ship USPS most appropriate rate or UPS ground whichever service I feel is most appropriate. Insurance will added when necessary. Multiple Wins when possible will be combined for a lower shipping price. SHIPPING TIME is 1 business day or quicker if possible. All items may be picked up. PAYMENT by PayPal. Or Cash at ... morePickup. If you have a payment question or need to use a check contact me before bidding. PAYPAL PAYMENTS will ship only to the address shown on the paypal transaction record NO EXCEPTIONS. INTERNATIONAL BUYERS: PayPal payments only from the countries that are covered by paypal seller protection. Shipping will be to the address shown on the paypal transaction record NO EXCEPTIONS. RETURN POLICY: I stand behind the item as described and pictured. If there is a major error. Not nitpicking details or suitability of use, please contact me within three days of receipt so I can resolve the problem. Items returned without contacting me first will not be accepted. Returned items must be in the same condition as sent. Shipping cost may not be covered. PLEASE: Winning bidder is expected to respond in a timely manner. PayPal payments should be received within 3 days following the end of auction; on day 5 a no-pay bidder notification will be sent. Thank You Powered by The free listing tool. List your items fast and easy and manage your active items. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14c018a8900-0x104-
4 ~ Milwaukee CARBIDE ROUTER BIT & LAMINATE TRIMMER BITS Assorted Made in USA.
4- Milwaukee carbide router& laminate trimmer bits 1/4” shank all bits are made in USA. See photos for details. Like new condition opened but never used Solid Carbide#48-23-5195 bevel trimmer 7-½ degree#48-23-5235 flush trimmer 1/4” Used in very good condition Carbide Tipped#48-23-5080 Straight 1/2” 48-23-6000 pilot panel bit 1/4” ITEM DESCRIPTION is as complete and accurate as I could make it. If you need additional information or photos, please contact me. SHIPPING COST is for the well-packed auction item per ebay calculator. I ship USPS most appropriate rate or UPS ground whichever service I feel is most appropriate. Insurance will added when necessary. Multiple Wins when possible will be combined for a lower shipping price. SHIPPING TIME is 1 business day or quicker if possible. All items may be picked up. PAYMENT by PayPal. ... moreOr Cash at Pickup. If you have a payment question or need to use a check contact me before bidding. PAYPAL PAYMENTS will ship only to the address shown on the paypal transaction record NO EXCEPTIONS. INTERNATIONAL BUYERS: PayPal payments only from the countries that are covered by paypal seller protection. Shipping will be to the address shown on the paypal transaction record NO EXCEPTIONS. RETURN POLICY: I stand behind the item as described and pictured. If there is a major error. Not nitpicking details or suitability of use, please contact me within three days of receipt so I can resolve the problem. Items returned without contacting me first will not be accepted. Returned items must be in the same condition as sent. Shipping cost may not be covered. PLEASE: Winning bidder is expected to respond in a timely manner. PayPal payments should be received within 3 days following the end of auction; on day 5 a no-pay bidder notification will be sent. Thank You Powered by The free listing tool. List your items fast and easy and manage your active items.
Rockwell Wood Shaper Cutter Qr. Rd. & Bead RH 3/4" Hole 1/2" Bushing #43-952
This is for the Rockwell wood shaper cutter bit pictured.This was a recent estate sale find and from what I can tell it appears to be unused but since I don't know its history and can't be absolutely certain so we'll say its been very lightly used. From what I can tell this looks to have been made well and is of good quality. Please check out the pics for any other details and feel free to ask questions. Thanks for looking. We accept paypal only and ship to the United states only. No international shipping including APO/FPO/DPO zip codes. Payment required within 3 days or contact us for an extension. After you receive your item leave feedback and we will do the same.
3/8" X 1/4" KEY HOLE ROUTER BIT W/ 1/2" SHANK; 2 CARBIDE FLUTES, KEYHOLE T-SLOT
2 flute. Carbide Tipped. Plunging the bit produces 3/8" or 1/2" hole and moving the router creates a T-slot which will accept the head of a screw or nail. Used for hanging pictures, plaques, clocks, brackets, etc. flush to the wall without additional hardware.
Skil Ogee Stile Rail Bit Set with 1/2-in Dia Shank . Bosch
2 like new Skil 1/2" drive STILE and RAIL router bits in wood case. 1 new Bosch 3/8" x 1" trimming/cutout, 1 new Bosch 1/2" x 2-1/2" straight/mortising bit.
Lot 5 Amana Brand Router Bits Model #51306
Used once professionally sharpened. Cut 1/2" 3" Overall
Boxed TREND NOVA SYSTEM TIP SET 1 PANEL CUTTER + 5 BLADES 1/4" NT/SET/BX1/4
Here is a UNUSED TREND. NOVA SYSTEM- NT/SET/BX1. PANEL ROUTER CUTTER. Included in Box. PANEL CUTTER Body type B. 5 CARBIDE TIPS/BLADES. 1 HEX KEY ALL IN THE ORIGINAL BOX with FULL INSTRUCTIONS Tips/Blades 3 x B55 CLASSIC DECOR(D 19.0 R 4.0) 1 x B51 CHAMFER(D 9.5 A 45 degrees) 1 x B54 COVE(D 25.4 R 12.7) 1/4 INCH SHANK Condition THE CUTTER AND TIPS/BLADES ARE UNUSED IN THE ORIGINAL PACKAGING BOX HAS WEAR AND TEAR. PLASTIC PACKAGING IS FULLY INTACT UNOPENED. see photo's A QUALITY ROUTER PANEL CUTTER with 5 TIPS/BLADES and HEX KEY. Unused. YOU WILL NOT BE DISAPPOINTED! FROM A SMOKE FREE HOME Payment Paypal Preferred PLEASE. Shipping See Rates I have other tools for sale- I will combine the postage. My items are very well packed and wrapped. Hence the Postage Charge. SEE MY FEEDBACK TO CONFIRM THIS. Thanks for Looking. Come Back Soon Template ... moreby christine_derbyshire 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14c0b6cefd6-0x11a-
Help