|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Slotting bits can be used biscuit joinery, cope and stick and to create panel slots in rail and stile cabinet doors. This slotting bit has a cutting depth ... moreof 3/8" and a cutting thickness of 1/2". The overall length is 2-5/8" with a 1/2" shank.
Buy It Now
$3.54 Shipping Condition: Brand New Location: China Specifications:Product Name: Straight End Mill CutterMaterial: HSS-ALCutting Diameter: 16mm / 0.63"Shank Diameter: 16mm / 0.63"Cutting Length: 32mm / ... more1.26"Overall Length: 92mm / 3.62"Number of Flutes: 2Package Content: 1 x Straight End Mill Cutter, 1 x Plastic Box Description:1.Suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.2.With high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.3.Sharp and durable, convenient for chip removal, further improve machining efficiency.4.Make sure work piece and machine are stable,use hydraulic chucks, collet chucks,or shrink fit chucks.5.
Buy It Now
Free Shipping Condition: New Location: Monroeville, United States Our Chip Breaker routers boast superior cut quality and cutting efficiency across a spectrum of materials. Their multi-flute design has razor-sharp serrations ... moreto breakdown chips into small pieces, reducing friction and thermal damage. This delivers a smoother cut on wood, composites, ceramics and more. The Fish Tail plunge tip is gentle on sensitive materials, preventing fracturing and backside breakout. This 10-piece set is a must-have for any workshop.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best for achieving smooth finish on hard plastics. These bits are a better choice for hard plastics such as acrylic and phenolic. Downcut endmills shear ... morein a downward direction causing the uppermost layer of the material to be pressed down against the material just below it.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This bit has a total cutting depth of 1/2" and a 1/2" shank. Design Ogee. Number of Bits 1. Number of Flutes 2. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The shank is 1/2". Radius 3/8". Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Add a quick and easy micro bevel to your counter top projects. This bit will trim and bevel the edge of any veneer up to 5/36" thick. These bits will ... moretrim and bevel veneer finishes eliminating the need for filing.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Flute Angle. Degrees 45°. Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Perfect for making dado grooves and all types of straight cut work. They are ideal for joinery such as box joints, lap joints, dados, rabbets, mortises ... moreand tenons. You can also use straight bits for trimming operations and CNC work.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Slotting bits can be used biscuit joinery, cope and stick and to create panel slots in rail and stile cabinet doors. Flute Angle. This slotting bit has ... morea cutting depth of 3/8" and a cutting thickness of 1/4".
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States They are ideal for joinery such as box joints, lap joints, dados, rabbets, mortises and tenons. You can also use straight bits for trimming operations ... moreand CNC work. Bearing Height. Mortising Height.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best used for: Standard milling, dadoing, and boring. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. ... moreThe up cut direction can leave behind a minimally rough top surface edge.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Flute Angle. Cutting Depth. Degrees 90°. Mortising Height. Bearing Height.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The cutting depth is 1-1/4" and the shank is 1/2". Radius 1/2". Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: United States Specifications:Product Name: End Mill CutterMaterial: CarbideShank Diameter: 3.175mm / 1/8"Cutting Diameter: 2.5mm / 0.1"Cutting Length: 17mm / 0.67"Overall ... moreLength: 38mm / 1.5"Number of Flutes: 2Package Content: 5 x End Mill Cutter 1.Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.2.Good for 2D relief sculpturing, cutting, engraving, slotting, milling, etc.3.Carbide can run at higher speed than high-speed steel, resisting abrasion and high cutting temperature.4.Cutting edge has high precision, sharper, harder hardness, higher wear resistance, higher strength, higher bending, less wear and tear, and long life.
Buy It Now
Free Shipping Condition: Used Location: Thompson, United States 1/8" SHANK. DIAMOND CUT.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This design softens the edges of the piece and adds a classic look to it as well. Design Corner Bead. Radius 5/16". Bearing Height 3/16".
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best used for: Standard milling, dadoing, and boring. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. ... moreThe up cut direction can leave behind a minimally rough top surface edge.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This bit has a radiused cutting height of 1-7/8" for fretboards up to 3-3/4" wide. These radiusing bits will eliminate the excessive effort required for ... moreusing a sanding block. This will radius one half of the board.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This bit cuts a 1/8" bullnose or half-round (1/16" radius) with an 3/16" fillet above and below the profile. This bit includes a guide bearing for easy ... morefence depth setup and a 1/4" shank. You can also create dowels, with the help of a little bit of jig setup creativity.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Flute Angle. Best used for: Standard milling, dadoing, and boring. Bit breakage is less likely. Up cut end mills are the best choice for most standard ... moremilling applications. The up cut direction can leave behind a minimally rough top surface edge.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Bit Construction. Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The overall length is 3-3/16" and the shank is 1/2". Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The round over and cove sections of the profile have a radius of 3/16". Plunge cutting faux panel doors is a practical shortcut to achieving the look ... moreof raised panel doors with less effort and comparable beauty.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The overall length is 4-1/4" with a 1/2" shank. Edge the top and bottom surfaces of your workpiece simultaneously. Number of Bits. Number of Flutes 3. ... moreFlute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Great essential set! This set contains 10 essential bits needed for the most common routing tasks making it the perfect set for anyone. Most of the bits ... morein this set are 1/2" shank with one 1/4". Number of Bits.
Buy It Now
Free Shipping Condition: New Location: West Palm Beach, United States YILMAZ Machine. Cutter Size: 5mm x 12mm x 60mm x 8mm. Vinyl and Aluminum Window Manufacturers. WHO BUYS THIS MACHINE. Aluminum window and door manufacturers. ... moreAluminum signage manufacturers. And many more applications are possible for this machine.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best used for: Standard milling, dadoing, and boring. Up cut endmills are great for all standard milling and material removal. If a particular finish ... moreis required for your project, use a down cut or compression cut end mill for the final pass.
Buy It Now
$3.54 Shipping Condition: Brand New Location: China Specification:Cutting Edge Diameter: 2.4mm / 0.094"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 12mm / 0.47"Overall Length: 38mm / 1.5"Material: ... moreCemented CarbidePackage Content: 10 x Carbide End Mill Engraving Bits Description:1. Made from carbide material, good milling properties to ensure efficient work.2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.3. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..5. Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.6.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States 5/16" Dia. Down cut CNC end mills are great for dado, pocket and inlay work as well as the final pass on most projects. Flute Angle 28°. Best used for: ... moreLaminate or veneer-finish plunging and dadoing.
Buy It Now
Free Shipping Condition: New Location: Baldwin, United States FREUD 30-106 1/2" RADIUS COVE ROUTER BIT 1/4" SHANK INDUSTRIAL CARBIDE 1-3/8-inch diameter. 1/2-inch radius, 1/4-inch shank carbide for long ... morelife Anti-kickback di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-146af72d492-0x104-
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Flute Angle. This V-Groove bit set contains 3 bits with angles of 60, 90 & 120 degrees. Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This bit has a 5/16" radius with a cutting depth of 5/16" and a cutting height of 1/2" and a 1/4" shank. Radius 5/16". Bearing Height.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The cutting depth is 1-1/4" and the shank is 1/2". Radius 3/8". Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Up Cut Spiral. Number of Bits. Number of Flutes 2.
Buy It Now
$3.54 Shipping Condition: Brand New Location: China Specification:Cutting Edge Diameter: 2.7mm / 0.106"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 12mm / 0.47"Overall Length: 38mm / 1.5"Material: ... moreCemented CarbidePackage Content: 10 x Carbide End Mill Engraving Bits Description:1. Made from carbide material, good milling properties to ensure efficient work.2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.3. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..5. Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.6.
Buy It Now
$3.54 Shipping Condition: Brand New Location: China Cutting edge diameter: 0.5mm / 0.02" Shank diameter: 3.175mm / 1/8" Cutting edge length: 4mm / 0.16" Overall length: 38mm / 1.5"Left/right rotation: right ... morerotation Blade shape: fishtail corn shape Shank form: straight shank Style: standardPackage included: 20pcs carbide end mills This milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills' edge, helping to improve cutting accuracy and efficiency.Corn-shaped cutting edge, diamond-shaped cutting teeth, fishtail-shaped cutting tip, CNC router bits integrating drilling and milling.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States 7/32" Dia. Down cut CNC end mills are great for dado, pocket and inlay work as well as the final pass on most projects. Flute Angle 28°. Best used for: ... moreLaminate or veneer-finish plunging and dadoing.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The cutting depth is 1" and the shank is 1/2". Radius 1/4". Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The dovetail is probably the most recognizable of all woodworking joints. A dovetail joint is self-aligning and interlocking. All of these variations ... moreare common in casework and drawer construction.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The overall length is 3-1/2" with a 1/2" shank. Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This bit cuts a 5/8" bullnose or half-round (5/16" radius) with an 1/8" fillet above and below the profile. This bit includes a guide bearing for easy ... morefence depth setup and a 1/4" shank. Design Bullnose.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Number of Bits. Number of Flutes 2. Mortising Height. Flute Angle.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best for use in detailed applications, inlays and fine grooving. Cutting Length 1-1/2". Overall Length 3-9/16". Number of Bits.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Flute Angle 22°.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best used for: Standard milling, dadoing, and boring. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. ... moreThe up cut direction can leave behind a minimally rough top surface edge.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Number of Bits. Number of Flutes 2.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Flute Angle. Cutting Depth. Degrees 60°.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States This joint also provides a lot of gluing surface as well as aligning ease. Align the bearing with your fence using a straight edge. Make multiple passes ... moreincreasing the cutting depth by 1/8" for each pass until you achieve full depth.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The overall length is 4-9/16" with a 1/2" shank. While its original purpose was to protect your walls from chair back scrapes and dents, the chair rail ... moremolding can also transform any room from drab to elegant.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Best used for: Standard milling, dadoing, and boring. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. ... moreThe up cut direction can leave behind a minimally rough top surface edge.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The dovetail is probably the most recognizable of all woodworking joints. A dovetail joint is self-aligning and interlocking. All of these variations ... moreare common in casework and drawer construction.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The 3 flutes and the ZRN coating provide great performance and extended tool life. Tapered CNC end mills with ZRN coating provide the extra length needed ... moreto carve 3D shapes out of solid wood, plastic, foam and other materials.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States Perfect for making dado grooves and all types of straight cut work. They are ideal for joinery such as box joints, lap joints, dados, rabbets, mortises ... moreand tenons. You can also use straight bits for trimming operations and CNC work.
Buy It Now
$3.54 Shipping Condition: Brand New Location: China Specification:Cutting Edge Diameter: 3.175mm / 0.125"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 15mm / 0.59"Overall Length: 38mm / 1.5"Material: ... moreCemented CarbidePackage Content: 10 x Carbide End Mill Engraving Bits Description:1. Made from carbide material, good milling properties to ensure efficient work.2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.3. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..5. Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
Buy It Now
$3.54 Shipping Condition: Brand New Location: China Specification:Cutting Edge Diameter: 0.5mm / 0.02"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 3mm / 0.12"Overall Length: 38mm / 1.5"Material: Cemented ... moreCarbideSurface Treatment: Titanium CoatedPackage Content: 10 x Carbide End Mill Engraving Bits Description:1. Made from carbide material, good milling properties to ensure efficient work.2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.3. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..5. Tips: The longer the length of the tool clamped by the chuck, the better.
|
|
|
|
Amana Router Bit 54350
Gently Used Woodworker is cleaning out the workshop. Thanks.
|
|
|
Amana Router Bit 51580
Gently used Woodworker is cleaning out the workshop. Thanks.
|
|
|
Amana Router Bit 45964
Gently used- but could use a gentle cleaning for the rust spots Woodworker is cleaning out the workshop. Thanks.
|
|
|
25 CNCrouter wood double straight cutting bit 3/4 dia.x1/2 cut length 1/4 shank
25 CNCrouter wood double straight cutting bit 3/4 dia.x1/2 cut length 1/4 shank. Bits are used but in good shape.
|
|
|
Rockler #91419 Table Top Edge Router Bit
Rockler#91419 Table Top Edge Router Bit- 3"x 1-1/2"H post is 1-1/2" 1/2"shank 1-1/4" radius.
|
|
|
LOT OF 14 ROUTER BITS 3/8 SHAFT, BRAND UNKNOWN
THIS IS A LOT OF 14 ROUTER BITS.THERE IS NO NAME BRAND ON THEM,3/8" SHAFT ALL ARE NEW AND NEVER BEEN USED. 2 APPEAR TO HAVE BEEN USED.THESE ARE FROM MY UNCLE'S ESTATE.HE WAS A A CABINET MAN FOR OVER 50 YEARS AND HE PICKED UP TOOLS FROM EVERYWHERE. I KNOW NOTHING ABOUT THEM AS I HAVE NEVER USED A ROUTER. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-143e12b663a-0xd2-
|
|
|
Forstner 24 Piece Woodworking Wood Drill Bits Free Shipping
24 Piece Forstner Woodworking Wood Drill Bits Sizes: 1/4 to 3-1/8 by 1/8" increments Used for making holes in veneers A good bit for Dowling 3-1/2" long with 3/8" shank Anti-kickback design Solid hardened steel on shank and body C2 Fine-grained carbide blade constructed with high tensile silver-based brazing material to offer great strength and durability Carbide is CNC shaped and sharpened with diamond wheels as fine as 300 grit High hook& shear angles allow cutters to slice smoothly into stock producing clean. Splinter free. Body finished with coat to prevent build-up of sawdust. Resin, and pitch Free Shipping
|
|
|
Leitz Router Bit - Used Solid Carbide Compression Router Bit
Leitz Router Bit- Used Solid Carbide Compression Router Bit Used Leitz Router Bit- Solid Carbide Compression Spiral Router Bit. Solid Carbide Compression spiral bits are designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. This tool is a double flute which offers the best finish. Cutting Diameter: 1/2” Cutting Length: 1” Shank Diameter: 1/2” Overall Length: 2-1/2” Cutting Edges: 2 + 2. gsrx_vers_526(GS 6.6.6(526) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-143e3ac744a-0xef-
|
|
|
Pair of HD Router Shaper Cutter Bits with wood storage box Used
Up for sale is a pair of router shaper cutter bits and storage box. They are in good used condition. Feel free to email with any questions. Visit my store for more great deals! We accept Paypal for payment. If you are interested in using a different method. Please contact us to make arrangements. Items will ship the next business day(following Monday for weekend orders) with USPS. Fedex or UPS. If you have special shipping directions, please contact us prior to shipment to make changes. For international customers, you are responsible for any and all customs charges and country taxes. Most items are returnable up to 14 days after payment received if you are not satisfied with your purchase. Please read description and study pictures for detailed information on the item you are purchasing. Feel free to contact us with any questions or concerns ... morethrough the Ebay email service. We will get back to you as soon as possible. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143ee487544-0xfb-
|
|
|
33 Pcs Router Drill /Knife
33PCS Router Drill Used but still sharp end in good condition Selling Es it Is no return
|
|
|
*2 Rockler 92013 Router Bits & Bosch 85615M Router Bit*
Hesperia Pawn Shop Inc 16412 Yucca Hesperia. CA 92345 760-244-3338 Fax 760-956-7574"NO RESERVE" 2 Rockler 92013 Router Bits& Bosch 85615M Router Bit This is used with average wear. But still in good shape! All Auctions Are Insured In Good Shape And Guaranteed. IF YOU HAVE ANY PROBLEMS WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING NEGATIVE FEEDBACK/LOW RATINGS. WE STRIVE TO MAKE SURE OUR BUYER IS SATISFIED. PLEASE READ OUR SHIPPING. RETURN& PAYMENT POLICY BELOW" We accept Paypal. All Major Credit Cards. Payment is due 4 days after the auction has ended. Shipping will be US ONLY We will try and ship item within 24 hours of payment(except on weekends and holidays) California Residences add 8% sales tax. SERIOUS BIDDERS ONLY! For any questions call 760-948-2228 Monday- Friday 10:00AM- 6:00PM PST Thank You! Pay us ... moresecurely with any major credit card through PayPal! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 shaper cutters, 1 1/8 inch bore, by WTW, woodworkers tool works, chicago
4 used shaper cutters from wtw. Woodworkers tool works, chicago. each one is stamped. all have a number on them. 420, 407, 489, 490. either profile number or catalog number i am guessing. made od solid steel, no carbide. 1/1/8 bore. seling all 4 as a lot. one has nick in the profile on the cutter.
|
|
|
Jesada Wood Router Bits, Master Craftsman Set In Wood Box NO.600-813
This is a Jesada wood router bits set. Master Craftsman, No.600-813 in original wood box. Jesada asked some of the worlds finest craftsman to image that they could select the ideal set of router bitsrouter bits and here are the result. the Master Craftsman set is a collection of bits to suit the needs of most any all-round woodworker. Sure you'll want to add bits for door-making or other specialized poerations, but this set has what you need to get a shop up-and-running or to bring you existing bit selection up-to-date. You'll get a host of bits for various decorative edges and veins, a flush trim bit for laminate work and three different straight bits.You'll be hard pressed to find a better set. This set is in very very good condition with very light use except for one bit No.611-682 it has a small chip on one of the cutting ... moreblades. Still a great set See Pictures
|
|
|
Jesada Router Bits Upcut Spiral Set In Wood Box NO. 600-731
This is a Upcut Spiral Set of 7 wood bits in there original wood box made by Jesada Co. Made in the USA NO. 600-731. Ideal for furniture and cabinet shops. These solid carbide double flute bits quickly slice through hard or soft wood, plywood and composites such as MDF or particle board. unlike straight-flute bits,some portion of the spiral bits cutting edge is continously in contact with the workpiece, producing smoother cutting action and smoother results. Upcut bits pull chips up and out of the kerf for faster cutting. This set is in excellent condition no chips or other damage to any of the bits very nice set complete in box. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143eeb802c9-0xe9-
|
|
|
A Bundle of 6x Perform Router Cutters in Original Packets - Excellent Condition
A bundle of Perform Router Bits. 6x in all. 5x in original packets. All in excellent condition. A very good lot.
|
|
|
Set of 12 Miscellaneous Woodworking Router Bits - In Case - NEW!
Set of 12 Miscellaneous Woodworking Router Bits- In Case- NEW! This set of woodworking router bits are in new condition! Includes black wooden case. Would make a great addition to any shop! Bid with Confidence! Over 3800 Positive Feedback! 10033380-4 MCW
|
|
|
20 ONSRUD Used Router Bits 52-330 CNC DIY Plastic Wood Crafts Cabinet Furniture
Onsrud 52-330 Solid Carbide Spiral Up-Cut Wood Router Bits. 3/8" cut diameter. 1-1/4" flute length, 1/2" shank diameter, 3" length. Bits came with machine purchase, they all seem to have sharp edges, they are used but they were in holders with machine. Bits have glue residue from double face tape.
|
|
|
Diablo DR34110 Rounding Over Bit
Used in very good condition. For use with a router, Rounding over bit design, 1/4 in. radius, Red color, Please ask any questions before making a purchase or bidding. Payment: All payments must be made within 48 hrs of the end of the auction or Buy It Now. Shipping: The shipping charge listed is for the lower 48 states only. HI. PR, AK, American Samoa, the Virgin Islands and any other country please contact us for shipping cost. Feedback: Please contact us before leaving a negative feedback. We work for 100% customer satisfaction. We are willing to work out a solution to any problems or issues. Returns: Return are excepted for 14 days after the delivery date. We do not except returns on programs or videos. We do not pay return shipping. Please contact us before shipping the item back. Tax: California residents pay 8.25% sales tax. Normal ... more0 false false false EN-US X-NONE X-NONE
|
|
|
Diablo DR04108 1/4" Carbide Straight Router Bit
Does not have the original Package The Diablo 1/4 in. x 1 in. Carbide Straight Router Bit creates a safe. Controlled cut ideal for general stock removal. Tri-metal brazing provides impact resistance, and a non-stick coating reduces friction. Requires a minimum chuck size of 1/4 in. Provides a safe. Controlled cut ideal for general stock removal, Solid carbide, Kick-back reducing design, Tri-metal brazing for impact resistance, Please ask any questions before making a purchase or bidding. Payment: All payments must be made within 48 hrs of the end of the auction or Buy It Now. Shipping: The shipping charge listed is for the lower 48 states only. HI. PR, AK, American Samoa, the Virgin Islands and any other country please contact us for shipping cost. Feedback: Please contact us before leaving a negative feedback. We work for 100% customer satisfaction. ... moreWe are willing to work out a solution to any problems or issues. Returns: Return are excepted for 14 days after the delivery date. We do not except returns on programs or videos. We do not pay return shipping. Please contact us before shipping the item back. Tax: California residents pay 8.25% sales tax. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
3/4" Dia x 1 1/2" Wood Rasp with 1/4" Dia shank
3/4" Dia x 1 1/2" Wood Rasp with 1/4" Dia shank
|
|
|
Woodcraft carbide Drawer Corner Lock router bit, 1/2" shank, 1" cutter dia.
0 false 18 pt 18 pt 0 0 false false false From Bob at G Bob’s Collectibles- Up for auction this week. A Woodcraft Drawer Corner Lock carbide router bit that was used only once. It has a 1/2" shank with a 1" cutter diameter and a 1" cutter length. The original plastic storage case is included. Please inspect photos closely for exact condition and quality. I try my best to let you know what may be wrong with the item(e.g. dents. Dings, chips, etc. in the description. Please review the photos well and ask questions. I will get back to you promptly. I will send you an invoice within 24 hours of the close of the auction(unless you’ve already paid for your item) Payments are due through PayPal three days after the close of auction. All items are shipped through USPS(parcel post in the US and first class internationally) by the fourth ... moreday after the close of the auction. I use the most cost-effective shipping methods that ensure your item’s protection as well as your wallet’s. If you’d like to pay for faster shipping. Contact me after winning the bid and I’ll adjust your invoice appropriately. International bidders please remember items often take a couple of weeks to arrive(more if you’re in Asia) Additionally. It’s your responsibility to check your country’s customs policies(i.e. don’t win an item only to find out customs won’t give it to you) I highly recommend doing so before bidding. If you win more than one item. Please send me an email before I send you an invoice. If I can combine everything into one reasonably-sized package, I will and I’ll give you a lower shipping cost. I do not take returns. But I do want happy customers. So, please contact me if there is ever a problem with your order or if you have a less-than-positive experience with G Bob’s Collectibles. I’ll do my best to make things right. G Bob’s Collectibles is an e-commerce firm specializing in the buying and selling of cool guy stuff. You may on occasion see a Barbie or Troll doll- after all. They are collectibles. However, G Bob’s Co
|
|
|
FIVE ROUTER BITS 1/2" Shafts as detailed
Five Router Bits with 1/2" shafts as detailed. One- About 75mm long with 13mm cutter and no makers mark. Two- About 70mm long and marked Wadkin Ltd Leicester and 0.6875 dia. Three- About 70mm long and marked NLS Tools and 5/8. Four- About 70mm long and marked Wadkin Ltd Leicester and 3/4. Five- Abouit 75mm long and marked Wadkin Ltd Leicester with 4.5mm cutter. All used but with plenty of life left. 19959 Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143f8b96fb2-0x106-
|
|
|
4 shaper cutters, 1 1/8 inch bore carbide!!!
4 used shaper cutters with no name or markings on them. they all have nicks or a chip out of a croner of the carbide. see pics. i did my best to show the nicks and chips. 1/1/8 bore. seling all 4 as a lot.
|
|
|
FIVE ROUTER BITS 16mm Threaded Shafts as detailed
Five Router Bits with 16mm shafts as detailed. One- About 100mm long overall and marked Premier Tool and 3/4 but has been ground down to 5/8" Two- About 70mm long overall and marked Presto& 3/4" and has been ground down and blued the metal. Three- About 80mm long overall and marked SKF& 3/4" Four- About 70mm long and marked Osborne& 3/4" Five- About 70mm long and marked Marwin& 3/4" with countersink head. All used but in clean condition. 19955 Powered by
|
|
|
1/2" shank router bits -- 3 pcs 1/4", 3/8", and 3/4" radius
1/4" and 3/8" are like new. Radius bit threads are messed up for bearing- can only be used with out bearing like for router table. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-143febf6043-0xfb-
|
|
|
OMARK INDUSTRIES CREDO ROUTER BITS LOT OF 5 5/16" CARBIDE 2 FLUTES EXC 2 NOS
LOT OF 5 CREDO(OMARK INDUSTRIES) MADE IN U.S.A. ROUTER BITS. THE 2 CARBIDES ARE STILL HAVE THE FACTORY RUBBER SEAL ON THE BIT- NEVER USED. THE OTHER 3 ARE IN REMARKABLE LIKE NEW CONDITION. BELONGED TO MY GRANDFATHER AND NEED A HOME WHERE THEY CAN BE PUT TO USE. PAYMENT DUE WITHIN 5 DAYS OF PURCHASE. I WILL COMBINE SHIPPING ON MULTIPLE ITEMS SO PLEASE BROWSE MY OTHER ITEMS! 1- 10112 3/8" COVE HIGH SPEED STEEL SOLID PILOT 1/4" SHANK 1- 12072 1/2" ROUNDING OVER HIGH SPEED STEEL SOLID PILOT 1/4" SHANK 1- 12063 3/8" RABBETING HIGH SPEED STEEL SOLID PILOT 1/4" SHANK 1- 10118 3/8" STRAIGHT CARBIDE TIPPED 1 FLUTE 1/4" SHANK FACTORY RUBBER SEALED NOS 1- 12035 5/16" STRAIGHT CARBIDE TIPPED 2 FLUTES 1/4" SHANK FACTORY RUBBER SEALED NOS
|
|
|
Carb Tech Ogee Raised Panel 3-Wing Shaper Cutter
Carb Tech Ogee Raised Panel 3-Wing Shaper Cutter Excellent Used Condition 1/2" 3/4" Spindal
|
|
|
Shaper Collars / Bushings Lot Of 30
Lot of 30 used shaper collars. 4- 3/4" bore. 6- 1 1/4" bore. the rest are 1" bore. Good condition. See pics for details. Includes what is in the pics. Paypal please. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1440aeb4ba8-0xfd-
|
|
|
Freeborn & LRH Shaper Cutters, Lot Of 31 Cutters
Lot of 31 used shaper cutters Freeborn. LRH, some others. 1 1/4" bore. 3 raised panel cutters. 2 back cutters, 2 door edge cutters, a few profile cutters, and a bunch of straight cutters. These look to have been resharpened a few times the carbide is thin but still good and I do not see any chipping. See pics for details. Includes what is in the pics. Paypal please. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1440aeb4ba8-0xfe-
|
|
|
forest city toiol router bit
FOREST CITY TOOL ROUTER BIT 3/4" CLOSED SHOP 30 PLUS YEARS TOOLING CHECK OUT OTHER LISTING AS SHOWN SHIPS WITHIN 3 BUSINESS DAYS OF CLEARED PAYMENT
|
|
|
Rockler Router Bits Carbide Tipped 1/4" Shank
ROCKLER Rockler Router Bits Carbide Tipped 1/4" Shank In very good condition. 1/4" Shank Router Bits Carbide Tipped No accessories. Picture is of actual items. Terms and Conditions Payment: We accept payments via PayPal· Payment must be received within 7 days· Sales tax will be applied for local pickups. And shipping to a Colorado address. Shipping: Shipments will be processed within one(1) business day of payment receipt· We ship only to PayPal Confirmed addresses· Shipping is calculated for the lower 48 states; No international shipping· Shipping to PO Boxes. AK, HI, VI, PR, APO/FPO addresses may occur an additional fee· All items are shipped via UPS or USPS Local Pickup: Payment is still required within 7 days if you elect to do a local pickup; Sales taxes will apply· We accept cash. Visa, MasterCard, ... moreDiscover, Amex, for local pick up in person. If you wish to pay through PayPal please request a new invoice· Item must be picked up within 14 days from payment date. Customer Service: Fast Cash prides itself on customer service. And we want to provide you with 5-star service on every transaction. The best method of contacting us with questions or concerns is through the eBay email system. You should expect a reply to your email within 24 business hours. Please allow us to try to meet your expectations before giving neutral or negative feedback. We will do everything within our power to quickly resolve your inquiries. Return Policy: We accept returns within 14 days of receipt for the item as long as the following procedures are followed: 1. The item is returned in the original condition of which it was sent. 2. The item must be returned with an RMA number(Return Merchandise Authorization Number) 3. We ask that you notify us within seven(7) days of receiving shipment that you would like to return the item. Additional Return Details: Buyer is responsible for all shipping costs on returns unless determined otherwise TR 401-719698697-03.
|
|
|
LRH Shaper Bit K1090A 3/4" ID
This is a used LRH Shaper bit. These are very high quality industrial grade bits. This cutter has been sharpened and is still in very good condition.
|
|
|
LRH Shaper bit K1070FD 1.25" ID 5/8 Radius
This shaper bit is used but still in great condition. See photo for condition.
|
|
|
Freeborn Shaper bit .770" Groover 1.25" ID
This cutter is used but still is in good condition and very sharp.
|
|
|
Amana Tool Shaper Bit 905 1/4"R & 1/2"R X 2-5/8" OD 3/4" ID
Amana Shaper bit with 3/4" ID. Very little use, still very sharp and in great condition. This bit will do either a 1/4" Radius or a 1/2" Radius.
|
|
|
CMT Style & Rail Cutters
This auction is for a set of cmt router bits. Style and rail cutters, 1/2 shafts,these are used and are in good condition, any questions e-mail me, Thanks for looking. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1440aeb4cb4-0xf4-
|
|
|
Wood Working Lot of 3 Used ROUTER BITS Shaper Jointer bits Door Panel Molding
UP FOR SALE ARE 3 ROUTER BITS UNKNOWN MAKER 3- ROUTER BITS SEE PICTURES FOR SIZE- 12 pictures BITS ARE IN{AVG to G} USED CONDITION YOU BE THE JUDGE P LEASE READ THE WHOLE DESCRIPTION PAGE THANK YOU LOOK AT PICTURES FOR CONDITION OF 3 BITS YOU WILL BE BIDDING ON THE DESCRIPTION AND CONDITION OF 3 BITS FROM PICTURES 12 PICTURES NOTE The 3 bits have been used The 3 bite have some wear. Rust,marks,finish wear,edge wear I think bits have been use some and the blades feel sharp but won't cut your finger I don't see any name or marking of a maker or model numbers Please take a look at the pictures for size& condition WHAT YOU SEE IN PICTURES IS WHAT YOU WILL RECEIVE RULER& DIME NOT INCLUDED YOU BE THE JUDGE TAKE A LOOK AT PICTURES FOR CONDITION OF 3 BITS All 3 Used Bits have some Wear Aging Rubs Rust Marks Stains Edge wear Finish ... morewear All 3 bits have some rust& finish wear. Edge wear All 3 bits have been used READ NOTE ABOVE PLEASE TAKE A LOOK AT PICTURES FOR CONDITION OF 3 BITS SOLD AS IS I'LL LET THE PICTURES DO THE TALKING NOW THANKS FOR STOPPING IN AND TAKING A LOOK FEEL FREE TO CONTACT ME CONTACT ME FOR COMBINED SHIPPING OF ITEMS ITEM MUST BE PAID WITH IN TWO DAYS C H E CK OUT SOME OF MY OTHER LURES& ITEMS UP FOR AUCT I O N GO FISHING BITS WILL BE SECURELY SHIPPED BOXED ALL MY SHIPPING HAS TRACKING& DELIVERY CONFIRMATION SHIPPING{US} ONLY CONFIRMED PAYPAL-EBAY ADDRESS ONLY PAYPAL ONLY MY REPUTATION AS A SELLER AS WELL AS YOUR SATISFACTION IS IMPORTANT TO ME Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Craftsman 23/32" Convex Edge Router Bit 1/4" Shank
Like new Craftsman 23/32" Convex Edge Router Bit 1/4" Shank
|
|
|
Craftsman 1/8" Round Over Router Bit 1/4" Shank
Like new Craftsman 1/8" Round Over Router Bit 1/4" Shank
|
|
|
Craftsman 1/4" Roundover & Edge Beading Carbide Router Bit 1/4" Shank
Like new Craftsman 1/4" Roundover& Edge Beading Carbide Router Bit 1/4" Shank
|
|
|
Craftsman 1/2" Mortising Router Bit 1/2" Long 1/4" Shank
Like new Craftsman 1/2" Mortising Router Bit 1/2" Long 1/4" Shank.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1440bd295c4-0xef-
|
|
|
Craftsman 1/2" x 1/2" Rabbeting Router Bit 1/4" Shank
Like new Craftsman 1/2" x 1/2" Rabbeting Router Bit 1/4" Shank
|
|
|
VINTAGE SET OF ROUTER BITS NO#1214 DELTA SASH & CABINET SET NEAT L@@K
UP FOR AUCTION IS THIS VINTAGE SET OF DELTA ROUTER BITS NO# 1214 SASH& CUTTER SET LOOKS TO BE COMPLETE NEEDS A GOOD CLEANING IN ORIGINAL BOX JUST A VERY NICE SET OF ROUTER BITS MILWAUKEE DELTA WISCONSIN PLEASE ASK FOR MORE PICTURES OR ANY QUESTIONS
|
|
|
PORTER CABLE Router Templet Guide Kit #42000
UP FOR AUCTION PORTER CABLE ROUTER TEMPLATE GUIDE KIT. PART# 42000, IN ORIGINAL CLEAR PLASTIC CASE. AUCTION INCLUDES: 6 TEMPLATE GUIDES: 42024. 42033, 42036, 42042, 42045& 42054( KIT MISSING TEMPLATE GUIDE# 42027) 2 LOCK NUTS: 42237- FACTORY ORIGINAL CLEAR PLASTIC CASE.
|
|
|
1 7/8" Dia x 1 1/2" Wood Rasp with 1/4" DIa Shank
1 7/8" Dia x 1 1/2" Wood Rasp with 1/4" DIa Shank
|
|
|
Amana 980 RAISED PANEL BACK CUTTER 3/4" ID
Raised Panel Back Cutter di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1440bd6e9de-0xff-
|
|
|
Grizzly C2175 Entry Door Shaper Cutter Head Set
Grizzly C2175 Entry Door Shaper Cutter Head Set Can use C2194 to extended panel slot with door cutter set Excellent Used Condition 1/2" 3/4" Spindal On Feb-03-14 at 17:17:02 PST. Seller added the following information: Grizzly C2194 in additional auction is the matching center cutter and center spacer for thicker center panels and/or door frames.
|
|
|
Grizzly C2194 Center Door/Dado Cutter
Grizzly C2194 Center Door/Dado Cutter Can use a extended panel slot with door cutter sets Excellent Used Condition 1/2" 3/4" Spindal
|
|
|
Kitchen Cabinet Reversible Rail &Stile Shaper Head 201-8401
Kitchen Cabinet Reversible Rail&Stile Shaper Head 201-8401 Excellent Used Condition Some discolor on red paint area 1/2" 3/4" Spindal.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1440bd8ee71-0xe4-
|
|
|
Frued Kitchen Cabinet Set 97-104
Frued Kitchen Cabinet Set 97-104 Excellent Used Condition Some discolor on red paint area 1/2" Shank
|
|
|
Frued Door Shaper Head Set EC-270
Frued Door Shaper Head Set EC-27 Excellent Used Condition 1/2" 3/4" bore
|
|
|
1/4" CRAFTSMAN ROUTER BITS CARBIDE TIPPED BEARING GUIDE HSS VERMONT AMERICAN
HERE WE HAVE A MIXED LOT OF 1/4" ROUTER BITS. SOME ARE CARBIDE TIPPED. AND SOME ARE HSS. SOME ARE NEW AND SOME ARE USED. LOOK AT MY PICTURES. AND PLEASE ASK IF YOU HAVE ANY QUESTIONS. PAYMENT WITHIN 48 HOURS OF AUCTION ENDING. THANK YOU. AND PLEASE LOOK AT MY OTHER LISTED ITEMS!
|
|
|
Freud Carbide Tipped- Shaper Cutters, Door System
Up for sale Freud Carbide Cabinet Door System. These cutters have been used very little since I've owned them for 20 years now and only used them several times. All the carbide is sharp with no nicks or scratches. I believe everything that came with this kit is what you see. The bushing set will allow for either 3/4" or 1/2" spindle. Considering the replacement cost is around $400 this slightly used set is a good deal. Ships in the continental U.S. only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144171f514e-0xf7-
|
|
|
USED STEGHERR CARBIDE TIPPED MOLDER HEAD NR.2276-6/126 150X8.5-16X40
USED GREASEY STEGHERR MOLDER HEAD BG-FORM NR-77O25 CENTER HOLE IS SLIGHTLY LARGER THAN 1 1/8 BUT LESS THAN 1 3/16 5 3/4 IN DIAMETER 3 1/8 TALL OVERALL CUT WIDTH A LITTLE OVER 2 INCHES WIDE HEAD HAS 2 PIECES OF FOUR TOOTH CUTTERS CLAMPED TOGETHER EDGES ARE SHARP WITH A FEW CHIPS WEIGHT 8 LBS Sold as is, Please email any questions. Shipping includes delivery confirmation and insurance. Shipping to U.S. ONLY Item can be picked up for discount in item cost. Must request prior to buying item. Combined shipping discounts also available. Must request prior to buying items. Payment expected within 5 days of purchase. Good luck on bidding/ buying.
|
|
|
1/2 Shank Amana Router Bit 54262
Item: Amana Router Bit# 54262* Like New. Great Condition* Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
1/2 Shank Amana Router Bit 45964
Item: Amana Router Bit# 45964* Gently Used. Could use a gentle cleaning for the rust spots. Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
1/2 Shank Amana Router Bit 54524
Item: Amana Router Bit# 54524* Gently Used. Great Condition. Well Kept Tool. Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
1/2 Shank Amana Router Bit 54350
Item: Amana Router Bit# 54350* Gently Used. Great Condition. Well Kept Tool. Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
1/4 Shank Amana Router Bit 51580
Item: Amana Router Bit# 51580* Gently Used. Great Condition. Well Kept Tool. Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
1/2 Shank Amana Router Bit 54284
Item: Amana Router Bit# 54284* Like New. Great Condition* Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1441bf5014e-0xde-
|
|
|
1/4 Shank Amana Router Bit #49412
Item: Amana Router Bit# 49412* Like New. Great Condition* Retired Woodworker is downsizing the shop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
Freeborn Tool Mini Pro Series Cope & Pattern Shaper Cutter Set MC 50 010 Excllnt
Used set of cutters in excellent shape. Only used to make a few sets of doors. These cutters are versatile and easy-to-use. These 6 cutter sets are designed to cut the 3 function styles shown. This standard set cuts 1/4” wide x 3/8” deep tongue and groove. Common minor diameter requires NO fence adjustment when changing from cope to pattern cuts(3/8” tongue only) Counterclockwise rotation with wood fed face down. Check out my! U.S. Lower 48 states only. No international bidders. Please consider that your rating is very important to me and I will work out any issues that you may have. Please contact me with any concerns THANKS DON Questions about an Item Please ask any questions prior to bidding on my items. I will be happy to answer any questions to the best of my ability and provide other pictures if needed. Payment should be made within ... more3 business days of receiving an invoice from me. Unless other arrangements have been made. Shipping Information I only charge actual shipping cost and will always try to ship in flat rate boxes. The shipping cost will include tracking as it allows both parties the ability to see where the package is at all times. Returns Returns are excepted as long as the buyer returns the item in the same condition as when it was shipped. Thank You For Your Business!
|
|
|
Porter Cable door lock mortising machine
Machine is in excellent condition with all accessories and spare cutters will deliver free within 100 miles of NY city.
|
|
|
Solid Carbide Router Bits 3x ONSRUD 81-084 1/4" Single O flute USED
3 x USED ROUTER BITS- ONSRUD 81-084: 1/4" RH Single Flute. Straight O, Solid Carbide bit Used to cut ABS& PE plastic for around 10 hours of cutting time. Still fairly sharp!
|
|
|
KATANA PLUNGE ROUTER DADO BIT BOX SET~PLYWOOD~13/6 ~ 31/64 ~ 23/32~STARRETT RULE
KATANA PLUNGE ROUTER DADO BIT BOX SET~PLYWOOD~13/6 ~ 31/64 ~ 23/32~STARRETT RULE Up for auction is a fantastic boxed set of Katana Plywood Plunge Router Bits with a Starrett Metal Ruler. This set was a fantastic estate sale find. So we do not know the exact age. It appears to be in good condition with sharp bits. The previous owner wrote the sizes on the box and on the individual bits for easy identification. The bits included are- 13/64" 31/64" and 23/32. Please take a look at all of our pictures. Don't miss this great eBay buy or the other great items we have listed from this estate sale. This item is described to the best of our ability and sold as is. We want you to be pleased with your purchase. So please carefully read the contents of the auction, examine all of the pictures and if you still have questions, email us before ... morethe auction ends and we will respond as promptly as possible. Please remember that this is an auction and by bidding on this item. You are entering into a contractual agreement to purchase this item in accordance with the terms of auction as stated here. Honesty and integrity are foundational to our business and we appreciate the same in our customers. Returns accepted only if item not as described above. No refunds for buyer's remorse. Our aim is for this to be a pleasant experience all around so. Again, please email us with any questions you might have before the auction ends and we will be happy to respond as promptly as we can. Thank you and have fun bidding the eBay Way! PAYMENT: US Buyers: Paypal only. Payment is due within three(3) days from the date the auction ends. International Buyers: PayPal in U.S. dollars only. Payment is due within three(3) days from the date the auction ends. SHIPPING: We only charge what it costs to pack and ship your item. Never a handling fee. US Buyers: Calculated shipping charges include USPS Priority Mail. Parcel Select or FedEx Home Delivery, all of which include tracking. International Buyers: Please Note: We no longer ship to CAN
|
|
|
CNC THERMWOOD TOOLHOLDER
CNC-THERMWOOD TOOL HOLDER 6 THERMWOOD tool holders worth 368$ a piece BT30CH-075-275TV-TH PFK0294(2 are new and 4 used but like new) 2 cover nuts 85$ a piece TG75 PF00375 2 spindles 244$ a piece 5 collets(3 x TG75@ 35$ a piece. 2 X SY0Z-20@ 44$) CNC THERMWOOD BALANCED TOOLHOLDERS 25.000RPM BT30CH-075-275TV 2 Sensor kit 300$ 1 Photo electric cel 125$ Banner auto electric switch no picture These are new and used material and these at the retail price are 2840$
|
|
|
1 woodworkers tool works shaper cutter, 1 1/8 inch bore made in 1949!!!
all steel. No carbide. no idea the profile. good shape and sharp. marked with woodworkers tools works, chicago. also date of 3-1-49. model 12510.
|
|
|
3 shaper cutters, 1 1/8 inch bore carbide!!!
3 used shaper cutters with no name or markings on them. they all have small nicks or a chip out of a croner of the carbide. see pics. i did my best to show the nicks and chips. 1/1/8 bore. seling all 3 as a lot.
|
|
|
Amana Cove Raised Panel Router Bit 1/2" Shank
Amana Cove Raised Panel Router Bit 1/2" Shank. 1/2" bearing, 2 3/8" long, cutting height 1/2" depth of cut 1 7/16" radius 1 9/16"This bit is in great condition, only used for one small panel.
|
|
|
CNC Router Bit Woodworking MDF Door Profile Diamond
Lightly used custom diamond profile bit. We used this bit to make single pass MDF raised panel doors. Comes with protective case that was provided from the manufacturer.
|
|
|
12" Raised Panel Template System
12" Raised Panel Template System General Info: Stock# GB-141012 Machine Name: 12" Raised Panel Template System Condition: Used. Good Tested: Yes. Partial Working Condition Brand: N/A Model: N/A Serial: N/A Year: N/A Unit Weight: 25 Lbs. Location: Stone Mountain. GA Specifications: 12" Raised Panel Template System. 2" x 12" Capacity, Pneumatic Controlled. Additional Info: The Unit has been tested and is in fair working condition. When Clamp is initiated one side clamps all the way down while do other side partially clamps. Unit is still effective because it is able to securely clamp material still. If you are looking to upgrade to this unit from one you are currently using visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A ... moreBeverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
1-1/8" dia. ROMAN OGEE 2 Flute Carbide Router Bit (Used) 1/4" Shank w Bearing
This Listing is for a used 2 Flute Carbide Router Bit- 1-1/8" dia. ROMAN OGEE- 1/4" Shank- Ball Bearing Pilot This is in very good condition. There are no brand markings on this bit.
|
|
|
WHITESIDE 1/8" Corner Round Carbide Router Bit (2 Flute; #2000C)Used; 1/4" Shank
This Listing is for a used Whiteside 2 Flute Carbide Router Bit- Model 2000C- 1/8" Corner Round- 1/4" Shank- Ball Bearing Pilot This is in great condition. It's hardly been used. Made in the U.S.A.
|
|
|
CRAFTSMAN 3/4" Straight 2 Flute Carbide Router Bit (Used; #25519) 1/4" Shank
This Listing is for a used Craftsman 2 Flute Carbide Router Bit- Model 25519- 3/4" Straight- 1/4" Shank This is in great condition. Made in the U.S.A. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144265a3a70-0xfc-
|
|
|
AMANA 14 Deg. x 1/2" dia. Dovetail Carbide Router Bit (1/4" Shank; Used) 45804
This Listing is for a used AMANA 2 Flute Carbide Router Bit- Model 45804- 14 degree Dovetail- 1/4" Shank This is in great condition. It's hardly been used. Made in Israel
|
|
|
OLDHAM 1/2" Corner Round Bit 120-4-ROV (Carbide Router Bit; Used) 1/4" Shank
This Listing is for a used Oldham 2 Flute Carbide Router Bit- Model 120-4-ROV- 1/2" Corner Round- 1/4" Shank- Ball Bearing Pilot This is in great condition. It's hardly been used.
|
|
|
DML 01303 two Flute 3/8" Corner Round Carbide Router Bit (Used) 1/4" Shank
This Listing is for a used DML 2 Flute Carbide Router Bit- Model 01303- 3/8" Corner Round- 1/4" Shank- Ball Bearing Pilot This is in great condition. It's hardly been used.
|
|
|
LOT DREMEL/FILES TOOLS CHISEL VASCOLOY-RAMET 50 TOOLS NORTON ITALY Severance
This is a lot of DREMEL/file/grinding tools. Italy, Norton, Severance, Coastal Abrasive, and VASCOLOY-RAMET. There is a chisel w a name that is worn off, and a handle and lots more. Please look at all the photos as they best describe our items. Many of our photos will contain the measurements. A2 Thank you for visiting our auction! Please look to our other auctions for more quality retro items! We are constantly refreshing our inventory of quality and unique vintage merchandise. Visit both of our stores! Retro-roadshow and retro-roadshow-2 for anything from antiques and collectibles to large box lots. Subscribe to our stores! We sell a wide variety of items- and we aren't experts on all of them- but we do our best. So please review all of the pictures. Vintage Silver Plated 3 Serving Spoons Wm. A. Rogers Triple Oneida Ltd. If you are ... moreinterested- we will discuss selling ALL of our inventory in one lump sum for a discount. Please inquire! PayPal payment is DUE within 48 HOURS of the auction's closing. We try to ship within 1-2 business days- but at times can take up to 5 business days. We will ship internationally via the ebay global ship program. If it doesnt show as available for international shipments. It's probably not available under that program, and our hands are tied. We can combine items for shipping discounts but the combined shipping window is 5 DAYS MAX. Please email us for more information with ALL desired items. Local pickup is free and welcomed. Thanks again for looking! Posted with
|
|
|
AMANA ROUTER BIT RC-2257
USED AMANA WOODWORKING ROUTER BIT IN GOOD CONDITION.
|
|
|
29 PIECE CUTTING AND TRIMMING ROUTER BIT SET IN EASY ACCESS SEE THROUGH CARRY CS
WELCOME- JUST A FEW THINGS BEFORE DESCRIPTION- PLEASE NOTE THAT NOT ALL ITEMS COME FROM A SMOKE FREE ENVIROMENT. PLEASE READ DESCRIPTION CAREFULLY AND ASK QUESTIONS BEFORE BIDDING, PLEASE CONTACT ME WITH ANY PROBLEM.YOUR TRACKING NUMBER WILL BE AVAILABLE IN YOUR ORDER DETAILS, ONCE LABEL IS CREATED, WE CHARGE 1.00 FOR SHIPPING MATERIALS(INCLUDED IN YOUR SHIPPING CHARGES) THANKS AND HAPPY BIDDING- THANKS FOR LOOKING. AND WATCH FOR NEW LISTINGS. THE WOOD SEE THROUGH BOX HAS SCUFFS AND WARE AND COULD USE A CLEANING THE ITEMS INCLUDED IN BOX ARE LISTED BELOW 1/4' STRAIGHT 2 FLUTE 3/8 STRAIGHT 1/2' STRAIGHT 5/8' STRAIGHT 3/4' STRAIGHT 1/2' HINGE MORTISING 1/4' V-GROOVE 3/4' KEYHOLE 1/8' ROUND OVER WITH BEARING 1/4' ROUND OVER WITH BEARING 3/8' ROUND OVER WITH BEARING 5/16' ROUND OVER WITH BEARING 5/32' ... moreROMAN OGEE WITH BEARING 1/4' ROMAN OGEE WITH BEARING 1/4' PANEL PILOT 1/4' CORE BOX 3/8' CORE BOX 1/2' ROUND NOSE 1/2' CLASSICAL 1/2' OVOLO 3/8' DOVE TAIL 1/2' DOVE TAIL 1/4' LAMINATE TRIM WITH BEARING 1/4' COVE WITH BEARING 3/16' COVE WITH BEARING 5/16' COVE WITH BEARING 3/16' RABBETING WITH BEARING 45* CHAMFER WITH BEARING 1/8' COVE& BEAD WITH BEARING THE SET IS A 30 PIECE BUT THE 1/4' STRAIGHT 1 FLUTE IS MISSING THE BITS ARE DUSTY BUT IN NICE SHAPE THE CASE IS LOOSE AT TWO CORNERS
|
|
|
Freeborn cope and pattern shaper router 6 piece MC-50-500-602
Here's a nice set of Freeborn carbide blades. They are very sharp and ready to go to work. They have had very little use and should give you years of service.
|
|
|
CMT 811.754.11 CARBIDE ROUTER SHAPER STRAIGHT BIT
CMT 811.754.11 CARBIDE ROUTER SHAPER STRAIGHT BIT CUTTER DIAMETER- 1" DEPTH OF CUTTER- 1-1/4" LENGTH OVERALL- 3" SHAFT DIAMETER- 1/2" MADE IN ITALY
|
|
|
FREEBORN TOOL CO. 5 PCE. CARBIDE FLOORING SET PC-19-030 HARDLY USED!!!
FLOORING SET WAS TAKEN IN ON PAWN AND IS NOW BEING SOLD. SET WAS ALMOST $500.00 NEW! WAS USED FOR ONLY ONE JOB AND IS IN NEAR NEW CONDITION.WHAT YOU SEE IS WHAT YOU GET.
|
|
|
Amana Router Bit 54114 1/2 Shank
Amana Router Bit 54114 1/2 Shank Good Condition Retired Woodworker is clearing out the workshop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking.
|
|
|
Amana Router Bit 1/2 Shank 49414
Amana Router Bit 49414 Gently Used Retired Woodworker is cleaning out the workshop. Payment Option: I accept Pay Pal. Your prompt payment is greatly appreciated. Shipping Information: This item will be shipped via USPS. I ship to all 48 continental United States. I ship orders Monday through Saturday. Normal order shipments are 1 to 2 days from your purchase. All Sales Are Final. Thanks for looking. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1443df43df1-0xf3-
|
|
|
Vtg Handyman Club Of America Life Member Woodworking Router Bit Set 1/4"-1" Size
V tg Handyman Club Of America Life Member Woodworking Router Bit Set 1/4"1" Size Please message me on eBay if you have any questions. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1444487d675-0x104-
|
|
|
CMT 806.630.11 Router bit 2" x 1/2" shank w/pilot
CMT 806.630.11 Router bit 2" x 1/2" shank w/pilot. Lightly used to trim 24"x 24" trap door still like new. Payment due within 5 days from end of auction. Feel free to look at my other auctions and feedback.
|
|
|
bosch router bit lot,over 20 seperate peices,some rare finds and some great bits
FOR SALE bosch router bit lot, over 20 seperate peices.Some rare finds and some great bits I cant list every single piece because I don't know what they all are I will do my best 1. 1/2 inch hinge mortising bit(bosch 85159) 2.45 degree chamfering bit(bosch 85597) 3.3/4 radius rounding over bit(bosch 85434 M) 4.trimsaw blade 5/16 arbor hole(bosch 92837) 5.5/8 straight bit 2 flutes(bosch 85230) 6. amana carbide router bit(4429 plunge bit made in isreal) 7.amana carbide router bit 1 inche diameter 1/2 shank(45724 groove bit made in isreal) the rest of these are all assorted sizes and assorted conditions I would say these are all used some look new but I don't know how to tell I have other auctions plus I do fast shipping please email me with any questions or problems I will respond fast and do my best to handle any problems asap;1?RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1444487d6e6-0xe0-
|
|
|
Freud WB101 Woodworking Box Complete Doo Molding Shaper Cutter Set,3/4-Inch Bore
Freud WB101 The Woodworking Box Complete Door and Molding Shaper Cutter Set- 3/4-Inch Bore Thick micrograin carbide tips Kickback reducing design All Freud Shaper Cutters feature our exclusive Micrograin carbide for the longest life and kickback reducing design for added safety. These cutters are computer balanced and the cutting edges are precision ground for the smoothest cuts without vibration or chatter. Perma-Shield Coating on most Freud cutters results in less stress on your shaper for a faster cut and less tool maintenance. Payment Methods: You may pay instantly with PayPal by clicking the pay now button at the top. Credit cards: Visa. Master Card, Discover via phone direct. American Express only accepted with PayPal. 509-327-5544 M-F 9-6pm Pacific Time. Ask for Donny. Payments with PayPal and Credit Card orders will ship upon receipt ... moreof payment or after being cleared by Pay Pal. Pay Pal Check payments may take up to 4 days to clear Pay Pal and then shipped. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary. But are the same product. Payment is expected within 14 days of auction close. We can not guarantee availability of product if you are past 14 days& items is re-listed. Buyer is responsible for all shipping charges. Unless Specified by Doughboys Tools& Equipment. Shipping: SAVE on SHIPPING Combined shipping ONLY when multiple items are purchased in your shopping cart as per E-Bays New Shipping policy’s as summer of 2013. Any additional item paid and shipped together with the first one. The discount will only show when you REQUEST INVOICE after your last bid and based on all items in your shopping cart. BULKY AND HEAVY ITEMS MAY BE EXEMPT FROM COMBINED SHIPPING DO TO BOX SIZE& WEIGHT. WE SHIP FASTER AND WITH BETTER PACKED PACKAGES THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our RETAIL STORE, and mo
|
|
|
Craftsman Router Bit Kit & Case Partial
Craftsman Router Bit Kit& Case Partial Sears Craftsman Router Bit Kit 9 25518 with Case Fresh from an estate. Good condition. See pics for what is included. Some bits are missing. Ships safe and fast.
|
|
|
36 Shaper Cutters
This listing is for three dozen vintage Delta 1/2" bore shaper cutters. there are also 6 rub collars included. 31 of the cutters are sharp and usable. Only one cutter has a good sized chunk broken off(PICTURED) one of it's three wings and that is the 1" cove(D-211) The two D-125's have a worn top edge, the D-247 two chips on each bevel. The D-126 also has a top edge that is worn. The complete list of cutters is below, but if any particular picture is needed please ask. These generally go for 10-15 dollars a piece, so I think $195 with free shipping is A GOOD DEAL. There are a couple of multiples so the# in front of the"D" is the quantity. 3-D105,1-D214,1-LARGE ROUND OVER WITH A 3/4" RADIUS, 1-D211, D104,1-KL27,1-D253,1-D101,2-D125,2-D135,1-D247,1-D130,1-D131,2-D120,1-D180, 1-D100 OR 106 IT'S A 45 DEGREE ... moreONE, 1-D128, 1-D202, 1-D121, 1-D126, 1-D106 WITH A CUSTOM GRIND, 1 CUTTER WITH A 1/4" RADIUS UNMARKED, 1-D123, 1-D124, 4-D108 1/4" 3 WING SLOT CUTTERS, 1-D139, 1-D109, 1-D127. THE TALL CUTTERS IN THE GROUP OF 6 RANGE FROM 1" TO 1-5/8" TALL. THE NEXT GROUP OF 16 RANGE FROM 5/8"1" AND THE SHORTER ONES ARE 1/4"7/16 TALL. THANKS FOR LOOKING!
|
|
|
S.S. Reamer 72190523 Chucking Reamer 0.8125" Reamer Diameter 5/8" Shank
S.S. Reamer 72190523 Chucking Reamer 0.8125" Reamer Diameter 5/8" Shank Left Side: Right Side, Manufacturer: S.S. Reamer Model: 72190523 Description: Chucking Reamer 0.8125" Reamer Diameter Condition: Restored/Modified Packaging Condition Details: Slightly Distressed Chucking Reamer Specifications: 5/8" Shank 6.5" Shank Length 0.8125" Reamer Diameter 2.5" Working Length 10" Long Includes: Chucking Reamer Packaging Condition: Slightly Distressed We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please ... morenote that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item(up to 9 additional items) Local Pickup We offer local pickup for our customers who want to save money and not pay for shipping. Pickups are at 431 N W
|
|
|
Huge Carbide Tipped Router Bits Lot, Cnc , 2 Flute , Onsrud , Over 100 Bits
This listing is for a lot of over 100 carbide tipped router bits for Cnc or hand held routers. The lot includes a mix of some new bits and used bits. The most are used but used very little and have plenty of carbide in them for re sharps. Most of these bits are onsrud brand but there is a mix of other manufactors. Also most of the bits are a 1/2 diameter with a 1/2" shank diameter. There are some 1.500" diameter bits and some 1/4" Also a couple large miter bits. Look at pictures and feel free to ask any questions Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144526a8a08-0x11b-
|
|
|
Amana Insertable Miter Bit Cnc, V Groove , Miter Folding , Sign Making Bit
This listing is for a used Amana 45 degree insertable miter bit. It has one carbide insert cutting edge. Commonly used on Cnc equipment for v grooving. Miter folding and sign making. The cutter has a diameter of 2.500 inches and a over all height of 4.500 inches and has a.750 inch shank diameter. The model number on the shank is rc1028. The cutter works great no bent shank or gouges. Gust some surface pitting and general wear here and there as shown in the pictures. These sell for over $300 new from Amana Posted with
|
|
|
CNC Insertable Spoilboard Cutter , Surfacing Fly Cutter With 10 New Inserts
This listing is for a used 3 wing insertable Cnc spoil board surfacing cutter. Fly cutter. It is 3 wing and takes a 4 sided carbide insert. It comes with three inserts in the cutter and a new never used pack of ten inserts that are all 4 sided can be used on all 4 sides. The cutter head is in great working condition. No bent shank. Has a few surface blemishes but works great. The cutter is marked with Cst 43st on the shank. The shank diameter is.750" and the over all cutter is 3 inches in height with a diameter of 4 inches. These cutter heads sell for over $275 new and the inserts are about $40 per pack of 10 Posted with
|
|
|
Solid Carbide Router Bits 8x 1/4" RH 2 Flute Straight O Vortex 5540 USED
8 x USED ROUTER BITS- VORTEX 5540: 1/4" RH 2 Flute. Straight O, Solid Carbide bit Used to cut ABS& PE plastic for around 12-14 hours of cutting time. Should be plenty sharp for many light duty routing projects. In good condition.
|
|
|
5/8" Diameter 1/4" Shank Fillet Router Bit 7078-19-7
5/8" Diameter 1/4" Shank Fillet Router Bit-5/8" Diameter-1/4" Shank QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 201-497-6767 SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the ... moreauction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Send us your zip code and ship to address is it commercial with or without loading dock or residential. All quotes will be for street delivery. Due to the cost of fuel. Please ask for a freight quote. We do not mark up freight; we will add a handling cost to the quote. NJ Sales tax; Items delivered within the State of New Jersey are subject to a 7% sales tax. All shipments will ship to the confirmed address in the buyer's PayPal account. RETURN POLICY; Returns will not be accepted if the equipment is not in the same condition as when it was shipped to the buyer. Photo and condition of equipment will be noted on the bill of lading. Buyer is responsible for return shipping. DISCLAIMER; Placing a bid on our auctions or making an offer. Indicates you have read and agreed to all ter
|
|
|
MLCS 9/16 CARBIDE SLOT CUTTER BIT
This bit is carbide tip 1/4' shank. 9/16 slit cutter bit. I used this bit just once when I decided woodworking is not for me. If you have any questions please message me. look for my other router bit auctions. thank you for looking.
|
|
|
18 Piece Carbide Router Bit Set w/Wrench and Wooden Case
18 Piece Carbide Router Bit Set w/ Wrench and Wooden Case*Fully heat-treated shanks and bodies for durability*Controlled depth of cut minimizes kickback*Precision ground solid carbide cutting edges*Storage case*18 pieces + wrench Payment is expected no later than 7 business days after sale ends. PayPal only. All shipping is done Monday- Friday by 10:00 am CST. All payments received by 9:00 am CST Monday- Friday will be shipped that day. We only use the GLOBAL SHIPPING PROGRAM for international shipping. We do charge sales tax for sales within the state of Missouri and on all pick-up only sales. 8.679%
|
|
|
Quality CMT 3 Pc. Raised Panel Cutter Set for Router or Shaper
For your consideration. This quality CMT 3 pc. Raised Panel Cutter Set in superb condition. Only the Cutter on the left(as shown in the photo) has been used and only minutely. All the Cutters are in perfect condition ready to be used. Please refer to the Photos for the style of cut. An expensive set and if someone can utilize, started at a very reasonable price with no reserve. You will not be disappointed in any way. Shipping will be the"EXACT COST ONLY" of packaged weight(approx. 3-4 lbs) to your Zip Code via USPS Priority or Standard Mail and will be determined at the conclusion of the auction when the buyers Zip Code is known. ABSOLUTELY DO NOT PAY WITH PAYPAY until I have had a chance to securely package and have evaluated for exact shipping cost. Then, get back to you with a valid invoice(one from me, not EBay) who quite often ... moredoes not take into account Zip Code differences. Thanks for taking a look, questions welcomed.
|
|
 |