|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States Lightly Used - Cleaned and Inspected - Plenty of Life Left Good for hobby and light industrial use.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States Lightly Used - Cleaned and Inspected - Plenty of Life Left Good for hobby and light industrial use.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States Lightly Used - Cleaned and Inspected - Plenty of Life Left Good for hobby and light industrial use.
Buy It Now
Free Shipping Condition: Neu Location: 闵行区, China Anwendung: Zum Profilieren / Schneiden von Steinkanten, Marmor & Granit, Quarzstein, Kunststein. Neue Vakuum-Hartlöttechnik bietet viel bessere Leistung ... moreSchnelles Schneiden und lange Lebensdauer. Das untere Anschlaglager verhindert, dass der Bohrer in den Stein schneidet.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Vancouver, United States Tools were built by National Diamond Tool for a Boeing specific job which ended. 1.50 Cutting Surface. Bag 13D Lot 23. Visually the shank on these tools ... moreis stained from sitting in tool box. There are no marks or residue indicating they were used.
Buy It Now
$6.75 Shipping Condition: Used Location: Fayetteville, United States New clear plastic case.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States The safe RPM range for Glitter Bits is between 8,000 and 15,000 RPM. Do not exceed Glitter Bit Safe RPM. Glitter Bits are only for use in variable speed ... moredie grinders. Do not exceed Glitter Bit Safe RPM.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Specification : Number of Bits :1 Shank Diameter:1/4" Cutting Diameter:1/4" Cutting Length:1" Number of Flutes : 2 Bit Construction : Solid Carbide Flute ... moreAngle : 28° Best used for: Standard milling, dadoing, and boring.
Buy It Now
Free Shipping Condition: New Location: China 8pcs CNC Titanium Micro drill bits. Titanium little drill.
Buy It Now
Free Shipping Condition: New Location: Monroeville, United States 1/16" Carbide Router Bits FIVE Pcs. Diamond Flutes 1/8" Shanks Fish Tail Tip R132.
Buy It Now
$8.40 Shipping Condition: Used Location: Albuquerque, United States Three new bits, as pictured. Length overall is 4", cutter and shank diameter is 1/2". Made in the USA by Ultra Tool. $8.40 for Priority Mail.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States 1/32" Carbide Router Bits FIVE Pcs. Diamond Flutes 1/8" Shank Fish Tail Tip R105.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.256”). Shank Size. Flute Style. Part number:4 100-0394.256. The “rules of the tools” apply.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States Lightly Used - Cleaned and Inspected - Plenty of Life Left Good for hobby and light industrial use.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States OSG 415-8751. OSG 1732205 Spiral Flute Tap,#6-32,HSS-E. OSG 9599055 Screw Machine Drill,5.50mm,Powdered. Grainger reserves the right to accept or reject ... moreany order. Diversion contrary to U.S. law is prohibited.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States Lightly Used - Cleaned and Inspected - Plenty of Life Left Good for hobby and light industrial use.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.394”). Shank Size. Flute Style. Part number:2100 -0984J394. The “rules of the tools” apply. Overall Length.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.315”). Shank Size. Here's the link. Flute Style. Part number:2100.0625.315. The “rules of the tools” apply.
Buy It Now
Free Shipping Condition: Used Location: Thompson, United States 1/8" SHANK. DIAMOND CUT.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States 2.00mm Router Bits FIVE Pcs Diamond Pattern Carbide 1/8 Shank Fish Tail Tip R138.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.394”). Shank Size. Flute Style. Part number:4 100.0984.394. The “rules of the tools” apply.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.315”). Shank Size. Flute Style. Part number:2100.0787.315. The “rules of the tools” apply.
Buy It Now
$4.95 Shipping Condition: New Location: Monroeville, United States Tool Type Diamond Cut Flutes. Number of Flutes N/A. All our bits are from the industry leading manufacturer Union Tool USA. We are dedicated to providing ... morea wide variety of bits and bit sets at great prices.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are diamond-cut flute design and have a drill point style end for easy plunging. Shank Type Straight/Cylinderical. Style Drill Point. Material Diamond. ... morePoint Type 1. Part Number: 2121-312.255D. Part Number 2121-0312.255D.
Buy It Now
$4.95 Shipping Condition: Used Location: Monroeville, United States Includes One Piece of.
Buy It Now
Free Shipping Condition: New Location: Monroeville, United States 1/8" Carbide Router Bits FIVE Pcs. Diamond Flutes 1/8" Shanks Fish Tail Tip R145.
Buy It Now
Free Shipping Condition: New – Open box Location: Vancouver, United States Two Tools Sold As One Lot.
Buy It Now
Free Shipping Condition: New Location: Vancouver, United States Mfg by National Diamond Tool.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States OSG 415-1000. WIDIA GTD GT205008 Spiral Flute Tap,#8-32,HSS-E. GOULD & GOODRICH, INC. F/LB59-32W Duty Belt,Universal,Black Weave,32 In. HASSAY SAVAGE ... moreCO. 68004 Rotary Broach,Square,1/16". Grainger reserves the right to accept or reject any order.
Buy It Now
Free Shipping Condition: Neu Location: 闵行区, China CNC Flachend-Diamantschnitzbits 8/20 mm Schaft 8 mm Für Granit und Marmor. 5 Stück Ø 6 mm Zylinder mit Kugelkopf Diamantschleifkopfschaft 6mm Grate # ... more6. Radius 8 mm vakuumgelötete Diamantfräser für Steinschneider 12,7 mm Schaft Nr.
Buy It Now
Free Shipping Condition: Neu Location: 闵行区, China Diamant Fräser vom Kegeltyp für Steinschneider 12,7 mm Schaft Nr. 5 Stück Ø 6 mm Zylinder mit Kugelkopf Diamantschleifkopfschaft 6mm Grate # 6. Diamantschneider ... moreStichsäge zum Schneiden von Granit Marmor Keramikfliesen.
Buy It Now
$3.00 Shipping Condition: New Location: Saint Louis, United States LMT ONSRUD. Finish: AlTiN.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.315”). Shank Size. Flute Style. Part number:4100P0938F315. The “rules of the tools” apply.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.315”). For use in routing glass filled materials such as epoxy (circuit board depanelization) or carbon fiber. ... moreCan also mill a wide variety of other materials such as wood and ceramic.
Buy It Now
$4.95 Shipping Condition: Used Location: Monroeville, United States Includes Five Pieces of.
Buy It Now
Free Shipping Condition: Used Location: Monroeville, United States 3/32" Carbide Router Bits FIVE Pcs. Diamond Flutes 1/8" Shank Fish Tail Tip R138.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are diamond-cut flute design and have a drill point end style for easy plunging. Shank Type Straight/Cylinderical. Style Drill Point. Material Diamond. ... morePoint Type 1. Part Number 2121-1575.591D. Finish Type Uncoated.
Buy It Now
$4.95 Shipping Condition: New Location: Monroeville, United States Diamond Cut Flutes. Fish Tail Tip. Fish Tail tip eliminates back side breakout, splintering and delamination.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States OSG 415-7500. OSG 1604607 Straight Flute Tap,3/4"-16,HSS. NTN 6209LLUC3/L627 Radial Ball Brg,6209,45mm Bore,Alloy Stl. INSULTAB HSN-100 1/4 Blk 200 Shrink ... moreTubing,200 ft,Blk,0.25 in ID. GRAINGER APPROVED 6YE26 Bin Mounting Clip,1/4 in L,PK5.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States OSG 415-7501. OSG 6603100 Sq. RAYMOND 305406D ISO D Die Spring,Hvy Duty,19.05mmx38mm PK 10. Grainger reserves the right to accept or reject any order. ... moreDiversion contrary to U.S. law is prohibited. Grainger Part #:35CN64.
Buy It Now
Free Shipping Condition: New Location: China JINGLING15-60mm Diamond Rotary TAPER Single Type Angle Drills Chamfer HoleCoated Tools of Glass Grinding Points Grit 150. Taper Angle: 90 degrees. Head ... moreShape: TAPER. Use to machine chamfer hole of glass, stones etc.
Buy It Now
$10.40 Shipping Condition: Used Location: Rockwall, United States Dirty/ Rust/ black stains see pictures. Used surplus from aircraft manufacturer. probably used to machine composites.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Cutting Edge Diameter: 1mm / 0.039"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 7mm / 0.276"Overall Length: 38mm / 1-1/2"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Diamond Film CoatedCoating Process: CVD (Chemical Vapor Deposition)Style: Corn ShapePackage Content: 2pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
Free Shipping Condition: New – Open box Location: Lees Summit, United States NEW- NO ORIGINAL PACKAGING BULK WHOLESALE LOT VERY HIGH RETAIL VALUE YOU WILL RECEIVE ALL 251 QTYTHERE ARE 247 QTY ALL THE SAME 1/8” BITS THE REST REFER ... moreTO PICTURES REFER TO PICTURES WE ARE A BULK WHOLESALER DIRECT TO CUSTOMER 2-1 Lin (small tote)
Buy It Now
$5.45 Shipping Condition: New Location: Vancouver, United States .375 Shank. This tool was mfg. by National Diamond Tool for an Aerospace Job. Bag 13D Lot 25.
Buy It Now
$4.95 Shipping Condition: New Location: Monroeville, United States • Fish Tail plunge point eliminates back side breakthrough, delamination and fracturing of materials.
Buy It Now
Free Shipping Condition: Used Location: Fayetteville, United States 10 Piece 1.60 mm(.0630")......... CNC PCB DREMEL DIAMOND CUT FLUTE CARBIDE ROUTER BIT.......... Constructed of Industrial Grade Solid Tungsten Carbide........... ... moreManufacturer Union Tool ........... Please note ,These bits are Very Sharp and lightly used and Each Piece has Been Cleaned . These router bits can be used for your plastic, soft media, wood, or metal ....... MADE IN USA
Buy It Now
Free Shipping Condition: New Location: Trufant, United States It's perfect for cutting and shaping materials with ease, while its PCD-tipped design ensures a long tool life and excellent wear resistance.
Buy It Now
Free Shipping Condition: New Location: Bassett, United States Located in Bassett, Virginia. Right Hand.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.256”). Shank Size. Flute Style. Part number:2100.0551.256. The “rules of the tools” apply.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are up-cut flute design.These have a fishtail end. Style Fishtail. Shank Type Straight/Cylinderical. Use to tool for routing glass supported materials ... morelike G10 and carbon fiber. Point Type FT. Finish Type Uncoated.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are diamond-cut flute design.These have a flat end which will not plunge. Shank Type Straight/Cylinderical. Point Type 1. Finish Type Uncoated. Style ... moreFlat End - no Endstyle. Tool Flute Type Standard - Down Cut.
Buy It Now
Free Shipping Condition: New Location: China 24.7mm Round Nose Bit R12 -Extended. Coarse grit diamond, best on marble, granite and glass. Grit : 60 Coarse. Quantity: 1 Piece. Specifications and shapes ... moreTotal length.
Buy It Now
$4.50 Shipping Condition: New Location: Georgetown, United States They are 1.5” long, and flute length of (.177”). Shank Size. New lower pricing. Flute Style. Part number:4100-0354J177. The “rules of the tools” apply.
Buy It Now
$4.90 Shipping Condition: New Location: Boise, United States The Milwaukee 49-56-5640 hole saw is made of higher-grade diamonds for maximum heat resistance, giving it up to 10X longer life compared to other models ... morewhen used in cutting abrasive hard materials. This 1-3/4" hole saw is best for cutting, anchoring, and giving hole clearance in all types of tiles, stones, and glasses.
Buy It Now
$1.89 Shipping Condition: New Location: China Application for stone edge profiling/cutting, marble & granite, quartz stone, artificial stone, tile etc. Shank: 1/2"(12.7mm). - Blade: Diamond Stone. ... moreUse wet or dry. - Body: Solid Hardened Steel.
Buy It Now
$6.75 Shipping Condition: Used Location: Fayetteville, United States (1.59mm (.0625") 25 piece Diamond Cut Flutes. 1.30mm ") 25 piece Diamond Cut Flutes. new clear plastic case.
Buy It Now
$10.86 Shipping Condition: New – Open box Location: Venice, United States ATRAX DIAMOND CUT ROUTER BITS - 3/16" CUT SOLID CARBIDE 1/4" x 5/8" x 2" lg. Brand: Atrax End Type: Drill Point Cutting Diameter (Inch): 3/16 Cutting ... moreLength (Inch): 5/8 Shank Diameter (Inch): 1/4 Cut Pattern: Diamond Material: Solid Carbide Overall Length (Inch): 2 Retail Price for one lot of 8 Router Bits is $160 pete/Shelf U/bin # 1/ 20022 HF 8-20-15 Modified by Kimmy 06-20-16.
Buy It Now
$5.99 Shipping Condition: New Location: Minooka, United States OSG 415-2181. GRAINGER APPROVED HTH 60X35/15-35K PUR Tread Stl Core Wheel for Pallet Jack. SCHLAGE RESIDENTIAL FE595 CAM716GEO Push Button Lockset,Knob,Antique ... moreBronze. EAGLE BELTING 5050016 Twisted O-Ring,3/16,Clear,12 L,PK50.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States OSG 415-5625. OSG 5911200 Tapered End Mill,Square,HSS,5/64". OSG 20413600 Cor Rad End Mill,3/8",Carb,0.0600" rad. Grainger reserves the right to accept ... moreor reject any order. Diversion contrary to U.S. law is prohibited.
|
|
19 Lach Diamond CNC router bits woodworking bit grooving, jointing, rabbeting
Please see all picture and ask questions if you need to before buying them 19 Lach Diamond CNC router bits woodworking bit grooving. Jointing, rabbeting Bit These bits were visually inspected and there is no chipping on the diamond carbide bits. They do show burns on the edges all of them are 1/2" shank
|
|
Lach Diamond CNC router woodworking bits Plunge bit L840128/1
Lach Diamond CNC router woodworking bits. Plunge bit L840128/1. Shank dimeter: 1/2" 12.7mm) Head dimeter: 1-1/4" 31.75mm) Overall length: 3-1/2" 88.9mm)
|
|
Lach Diamond CNC router bits woodworking bit t slot l840166/12
VIncent Lach Diamond CNC router bits woodworking Bit l840166/12 Shank dimeter: 1/2" 12.7mm) Head dimeter: 1-3/8" 34.925mm) Overall Length: 2-3/8" 60.325mm)
|
|
5 Lach Diamond CNC router bits woodworking bits LI 1211/2 , LI 3425/4
5 Lach Diamond CNC router bits woodworking bits LI 1211/2. LI 3425/4 Please take a look at all the pictures what you see is what you will receive. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
CARBIDE DIAMOND CUT FLUTE ROUTER BITS CNC PCB DREMEL 1.27 mm(.0500") 50 PIECE
CARBIDE DIAMOND CUT FLUTE ROUTER BITS CNC PCB DREMEL 1.27 mm(0500" 50 PIECE 1.27 mm(0500" CARBIDE DIAMOND CUT FLUTE ROUTER CNC PCB DREMEL 50 PIECE Shank diameter 1/8 Constructed of Industrial Grade Solid Tungsten Carbide. Manufacturer Union Tool Please note.These bits are Very Sharp and lightly used and Each Piece has Been Cleaned. These Router Bits can be used for your plastic, soft media, wood, or metal. Comes in a Rugged Plastic Case MADE IN USA lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-145148f7deb-0x10f-
|
|
CARBIDE ROUTER DIAMOND CUT FLUTE BITS VARIETY PACK-4 CNC PCB DREMEL 50 PIECE
CARBIDE ROUTER DIAMOND CUT FLUTE BITS VARIETY PACK-4 CNC PCB DREMEL 50 PIECE 1.60mm(0630" 25 piece Diamond Cut Flutes 1.59mm(0625" 25piece Diamond Cut Flutes Constructed of Industrial Grade Solid Tungsten Carbide. Shank Diameter 1/8 Manufacturer Union Tool Made in USA Please note.These bits are Very Sharp and lightly used and Each Piece has Been Cleaned. These router bits can be used for your plastic, soft media, wood, or metal. Comes in a Rugged Plastic Case
|
|
TEN Carbide Router Bits - Diamond Cut - Router PCB 1.60 mm / 1/16" diameter
When taking advantage of the 1/2 off second set. Buy one set at full price and then make an offer for one set at $4.50 within an hour and I'll accept that offer. That is just $14.50 + shipping for 20 solid carbide Diamond Cut router bits. Excellent free hand routing in wood with a Dremel or miniature router. These are lightly used. Precision miniature Diamond Cut router bits. The application and expense of the work piece that these are used for(mil spec printed circuit boards) require tool changes well before these tools are dull or chipped. Extremely sharp so be careful. Don't worry though they are tough, made from a single piece of solid, Tungsten Carbide. You'll receive 10 of these Used 1.60mm(063" diameter. Diamond Cut flute router bits, solid carbide tools made in the USA by US Union Tool. Flute Diameter- 1.60mm(063" ... moreShaft Diameter- 1/8" Flute Length- 400" Flute- Chip breaker Point- Fish Tail
|
|
|