Buy It Now
Free Shipping Condition: Used Location: South Korea FLOW RATE 600SCCM. Manufacturer : HORIBASTEC. VALVE O TREAT SUC. It was removed from machine of working condition. Condition : Used (good physical condition, ... morelittle scratched, not tested. s elling as it is ).
Buy It Now
Free Shipping Condition: Used Location: South Korea Manufacturer : HORIBASTEC. FLOW RATE 10SLM. GAS N2 MR.MG-06. N2 C.F. 1.000. VALVE C TREAT SUC. It was removed from machine of working condition. Condition ... more: Used (good physical condition, not tested. ).
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(O2/10SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: O2(Oxygen Gas) Flow Rate: 10.000 SCCM(10 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P012 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer: Celerity. Series: 8560 Series. Process Gas: Hydrogen (H2). This item has not been tested as we do not have the proper resources to do so. ... moreFlow Rate: 1,000 SCCM. Seals: Downmount - C Seal.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(N2O/15SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28965-001, Series: 125 Series, Type: MultiFlo(SC28) Process Gas: N2O(Nitrous Oxide Gas) Flow Rate: 15.000 SCCM(15 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N51P013 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, D
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(O2/100SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28964-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: O2(Oxygen Gas) Flow Rate: 100.000 SCCM(100 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N39P011 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discove
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(SiCl4/70cc) D-Net Digital+Cert. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, 1) Certificate of Calibration, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-03, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: SiCl4(Silicon Tetrachloride) Flow Rate: 70 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: O02P009 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(Cl2/500cc) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28961-001, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: Cl2(Chlorine Gas) Flow Rate: 500 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: O01P004 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Ex
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit UFC-8565 Mass Flow Controller MFC D-Net(CH3(3SiH) 500cc) C-Seals. Manufacturer: Celerity Model: UFC-8565 ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in a non-original sealed ESD-safe bag. This mass flow controller is in excellent condition with a few very minor scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This mass flow controller was pulled from a working setup that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit UFC-8565 Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: UFC-8565, AMAT Part# 3030-12992, Process Gas: CH3(3SiH) Flow Rate: 500 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Weight: 2.30 lbs. Condition: Used, Quantity: 1, SKU: O34P005 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 state
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(He/5SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28963-01, Series: 125 Series, Type: MultiFlo(SC26) Process Gas: He(Helium Gas) Flow Rate: 5.000 SCCM(5 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P011 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Pa
Buy It Now
$16.29 Shipping Condition: New – Open box Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Series: Z500. Process Gas: N2 (Nitrogen). Condition:New Other. Flow Rate: 50,000 sccm (50 SLM). Network ... moreStatus. Valve: Normally Closed.
Buy It Now
$16.29 Shipping Condition: New – Open box Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Condition:New Other. Process Gas: O2 (Oxygen). Flow Rate: 5,000 sccm (5 SLM). Network Status. Valve: ... moreNormally Closed. Network Interruption.
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(N2/15SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: N2(Nitrogen Gas) Flow Rate: 15.000 SCCM(15 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P015 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(C3H6/ 5L) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: C3H6-b) Propene) Flow Rate: 5.000 SCCM(5 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P010 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located a
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(Cl2/300cc) D-Net Digital+Cert. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, 1) Certificate of Calibration, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: Cl2(Chlorine Gas) Flow Rate: 300 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: O02P006 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. M
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(Ar/1SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: Ar(Argon Gas) Flow Rate: 1.000 SCCM(1 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N37P009 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(N2/25SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28965-001, Series: 125 Series, Type: MultiFlo(SC28) Process Gas: N2(Nitrogen Gas) Flow Rate: 25.000 SCCM(25 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N51P012 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(N2O/1SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28962-001, Series: 125 Series, Type: MultiFlo(SC25) Process Gas: N2O(Nitrous Oxide Gas) Flow Rate: 1.000 SCCM(1 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N51P014 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Disc
Buy It Now
Free Shipping Condition: New – Open box Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Process Gas: N2 (Nitrogen Gas). Flow Rate: 3,000 SCCM. Mounting: Surface Mount. Condition:New Other. ... moreCondition:New Other. AMAT Part #: 0190-34245.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Flow Rate: 30 SLM / 30,000 SCCM. Process Gas: N2 (Nitrogen Gas). Mounting: Surface Mount. AMAT Part ... more#: 0190-41111. Se habla espanol! CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product.
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(Ar/15SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: Ar(Argon Gas) Flow Rate: 15.000 SCCM(15 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P016 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at:
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Process Gas: SiH4 (Silane Gas). Manufacturer: Celerity. Flow Rate: 300 SCCM. Valve Position: Normally Closed. Interface: DeviceNet (5 Pin "M8"). Weight: ... more2.30 lbs. CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product.
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(Ar/10SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26050-001, Series: 125 Series, Type: MultiFlo(SC26) Process Gas: Ar(Argon) Flow Rate: 10.000 SCCM(10 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P008 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Pay
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(O2/15SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: O2(Oxygen Gas) Flow Rate: 15.000 SCCM(15 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P007 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(H2/15SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: H2(Hydrogen Gas) Flow Rate: 15.000 SCCM(15 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P013 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(CHF3/300cc) D-Net Digital+Cert. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, 1) Certificate of Calibration, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: CHF3(Fluoroform) Flow Rate: 300 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: O02P011 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. M
Buy It Now
$19.23 Shipping Condition: New Location: Leander, United States Flow Rate: 10K SCCM. Manufacturer: MKS. Process Gas: N2 (Nitrogen). 4 VCR Male Fittings. Connector: Digital I/O 5-Pin Micro connector (DeviceNet), Analog ... more9-Pin D Male. In-Line Mount. CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product.
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(C3H6/ 3L) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well(see picture 4) with only lightly indented rings, if any. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. NOTE: This unit will be shipped with protective blue tape over the c-seals on the bottom and the unit itself will be packaged inside of an ESD safe bag. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-26051-001, Series: 125 Series, Type: MultiFlo(SC27) Process Gas: C3H6-b) Propene) Flow Rate: 3.000 SCCM(3 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N13P009 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located a
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(SF6/100cc) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: SF6(Sulfur Hexafluoride) Flow Rate: 100 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N37P006 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, Ameri
Buy It Now
$16.29 Shipping Condition: Used Location: Leander, United States Flow Rate: 1SLM. Manufacturer: Fujikin. Fluid: HF (Hydrogen Fluoride). Seal Pitch 92mm. Se habla espanol! CDN Systems LLC, DBA Doug Deals, is not an authorized ... moredistributor or affiliated with the manufacturer of this product.
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit UFC-8565C Mass Flow Controller MFC D-Net(NH3/500 SCCM) C-Seals. Manufacturer: Celerity Model: UFC-8565C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed packaging. This mass flow controller is in great condition with a few minor scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This mass flow controller was pulled from a working system that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit UFC-8565C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Series: 8560 Series, Type: Mass Flow Controller, Model: UFC-8565C, AMAT Part# 0190-16329-003, Process Gas: NH3(Ammonia Gas) Seals: Downport- C Seals, Flow Rate: 500 SCCM, Mounting Position: Horizontal or Vertical, Interface: DeviceNet, Solenoid Valve Position: Normally Closed, Total Weight: 2.35 lbs. Condition: Used, Quantity: 1, SKU: O10P004 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Aera PI-98 Mass Flow Controller 0190-34211 Digital MFC D-Net(O2/30cc) C-Seal. Manufacturer: Aera Model: FCPI980CBAXDIDJAA ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Aera Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. Please Note: This controller is configurable; the tags on this unit have conflicting process gases and ranges, which means that it has probably been re-configured at some point and may have been used with multiple gases. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Aera PI-98 Mass Flow Controller, Specifications: Manufacturer: Aera, Series: PI-98 Series, Model: FCPI980CBAXDIDJAA, AMAT Part# 0190-34211, Type: Multi-03, Description: Mass Flow Controller, Process Gas: O2(Oxygen Gas) Flow Rate: 30 SCCM, Interface: DeviceNet(5 Pin"M8" Mounting: Surface Mount(C-Seals) Calibration Date: 12/03/2010, Footprint: 1.125" Weight: 2.65 lbs. Condition: Used, Quantity: 1, SKU: O07P027 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Process Gas: SiH4 (Silane). Manufacturer: Celerity. Series: 8560 Series. Flow Rate: 1,000 SCCM (1 SLM). This item has not been tested as we do not have ... morethe proper resources to do so. Seals: Downmount - C Seal.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Process Gas: NF3 (Nitrogen trifluoride). Flow Rate: 5 SLM / 5000 SCCM. MFC Health. Network Status. ... moreValve: Normally Closed. Network Interruption.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer: Horiba Stec. Manufacturer:Horiba Sec. Flow Rate: 10 SLM / 10000 SCCM. Process Gas: Ar (Argon). MFC Health. Network Status. Valve: Normally ... moreClosed. Network Interruption.
Buy It Now
Free Shipping Condition: Used Location: 구로구, South Korea Manufacturer : MKP. Flowrate : 20000 SCCM. Cal Gas : N2. It was removed from machine of good condition. But the parts has minor scratch and used marks. ... moreSold as is). FW Ver/REV : 14.07/02. · EMS : Commonwealth of Independent States (CIS-Russia, Ukraine….
Buy It Now
Free Shipping Condition: Used Location: Salt Lake City, United States Celerity Unit UFC-8565C Mass Flow Controller MFC Valve D-Net NH3/1SLM Warranty.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Process Gas: SiH4 (Silane Gas). Manufacturer: Celerity. Seals: Downport - C Seals. Flow Rate: 1,000 SCCM (1 SLM). Valve Position: Normally Closed. AMAT ... morePart #: 0190-16330-003. Weight: 2.30 lbs. CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Flow Rate: 10 SLM / 10000 SCCM. MFC Health. Process Gas: O2 (Oxygen). Network Status. Valve: Normally ... moreClosed. Network Interruption.
Buy It Now
$16.31 Shipping Condition: New – Open box Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Process Gas: CL2 (Chlorine Gas). Flow Rate: 500 SCCM. Seals: C-Seals. Mounting: Surface Mount. Condition:New ... moreOther. Condition:New Other.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Flow Rate: 10 SLM / 10000 SCCM. Process Gas: N2 (Nitrogen). MFC Health. Network Status. Valve: Normally ... moreClosed. Network Interruption.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer:Horiba Stec. Process Gas: NH3 (Ammonia). Manufacturer: Horiba Stec. Flow Rate: 5 SLM / 5000 SCCM. MFC Health. Diagnostic Port: RS-485 via ... more2.5mm Jack. Network Status. Valve: Normally Closed.
Buy It Now
$16.48 Shipping Condition: Used Location: Leander, United States Flow Rate: 100SLM. Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Process Gas: N2 (Nitrogen). MFC Health. Seals: IGS (we think). Valve: Normally ... moreClosed. Over Temperature.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(He/3SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28860-02, Series: 125 Series, Type: MultiFlo(SC25) Process Gas: He(Helium Gas) Flow Rate: 3.000 SCCM(3 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N53P003 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, America
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(NF3/15SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28965-001, Series: 125 Series, Type: MultiFlo(SC28) Process Gas: NF3(Nitrogen Trifluoride) Flow Rate: 15.000 SCCM(15 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N51P018 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(CF4/400cc) D-Net Digital+Cert. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, 1) Certificate of Calibration, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28860-02, Series: 125 Series, Type: MultiFlo(SC25) Process Gas: CF4(Tetrafluoromethane Gas) Flow Rate: 400 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: O02P005 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countrie
Buy It Now
$16.29 Shipping Condition: New – Open box Location: Leander, United States Flow Rate: 50,000sccm (50SLM). Manufacturer:Horiba Stec. Manufacturer: Horiba Stec. Process Gas: O2 (Oxygen). Network Status. Valve: Normally Closed. ... moreMounting: Surface Mount. Network Interruption.
Buy It Now
Free Shipping Condition: For parts or not working Location: Leander, United States Manufacturer: Celerity. Process Gas: NF3 (Nitrogen Trifluoride). Condition:For Parts or Not Working. The seals are still in good condition as well with ... moreonly lightly indented rings, if any at all. Seals: Downport - C Seals.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Manufacturer: Celerity. Flow Rate: 750cc. Seals: Downport - C Seals. AMAT Part #: 3030-12056. Se habla espanol! CDN Systems LLC, DBA Doug Deals, is not ... morean authorized distributor or affiliated with the manufacturer of this product.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(N2/7.2SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28963-01, Series: 125 Series, Type: MultiFlo(SC26) Process Gas: N2(Nitrogen Gas) Flow Rate: 7.200 SCCM(7.2 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N53P001 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, A
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(Ar/1.5SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28860-02, Series: 125 Series, Type: MultiFlo(SC25) Process Gas: Ar(Argon Gas) Flow Rate: 1.500 SCCM(1.5 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: O12P025 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, Amer
Buy It Now
$16.31 Shipping Condition: New – Open box Location: Leander, United States Manufacturer: Celerity. Process Gas N2 (nitrogen). Flow Rate.86SLM (860SCCM). Unit 125 Series. Valve Position: Normally Closed. Interface: DeviceNet (5 ... morePin "M8"). Network Status. Temperature Status.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(HBr/400cc) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: HBr(Hydrogen Bromide) Flow Rate: 400 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N49P013 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(CF4/300cc) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: CF4(Tetrafluoromethane) Flow Rate: 300 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N37P020 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, Americ
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(H2/5SLM) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28861-02, Series: 125 Series, Type: MultiFlo(SC26) Process Gas: H2(Hydrogen Gas) Flow Rate: 5.000 SCCM(5 SLM) Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N53P005 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, Am
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC CHF3/200cc D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: CHF3(Fluoroform) Flow Rate: 200 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N37P014 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Ex
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(NH3/600cc) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: NH3(Ammonia Gas) Flow Rate: 600 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N53P004 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American E
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Celerity Unit IFC-125C Mass Flow Controller MFC(C4F6/60cc) D-Net Digital C-Seal. Manufacturer: Celerity Model: IFC-125C ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Celerity Condition: Used. Comes in non-original sealed ESD-safe packaging. This mass flow controller has a few very minor scuffs and scratches from installation and removal. But nothing major. The seals are still in good condition as well with only lightly indented rings, if any at all. Notes: This mass flow controller was pulled from a working assembly that was being decommissioned. But was not tested separately after removal as we do not have the resources to do so. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Celerity Unit IFC-125C Mass Flow Controller, Specifications: Manufacturer: Celerity, Brand: Unit, Model: IFC-125C, AMAT Part# 0190-28859-02, Series: 125 Series, Type: MultiFlo(SC24) Process Gas: C4F6-q) Flow Rate: 60 SCCM, Seals: Downport- C Seals, Interface: DeviceNet(5 Pin"M8" Mounting Position: Horizontal or Vertical, Footprint: 1.125" Surface Finish: 4µ inch Ra, Valve Position: Normally Closed, Gas and Range Configurable: Yes, Display: Pressure, Flow, Temperature Status, LED Indicators: Network Status, Controller Diagnostics, Weight: 2.25 lbs. Condition: Used, Quantity: 1, SKU: N37P007 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orde
Buy It Now
Free Shipping Condition: Used Location: Bhavnagar Wadva S.O, India Mass flow device. flow rate: 30slm. valve: c treat. weight: 1.120 kg. We are here to help and will do our best to resolve any issues. hgs no.: 7274 2679.
|