|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Item. Morse Taper Shank Twist Drill Bit for cutting steel Manufacturer. UTD Union Twist drill co. USA made in the US America Diameter. 17/32" Shank ... moreSize. Morse Taper#2 Overall Length. 8-5/8" Flute Length. 4-1/4" Type. 2 Flute hs hss high speed steel Condition. Super sharp used This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144ef9c2976-0x120-
Buy It Now
$8.25 Shipping Condition: New Location: Sheboygan Falls, United States Holds 42 #2 Morse Taper drill bits.
Buy It Now
Free Shipping Condition: New – Open box Location: Russellville, United States MPN: 30426DN. Jacobs Morse Taper Drill Sleeve. Product: Morse Taper Drill Sleeve. Inside Morse Taper Size: MT2. Outside Morse Taper Size: MT4. Model: ... more642. New in sealed plastic inside plastic container.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Up for sale here is a 1-1/2" HSS Drill Bit 4-1/2" Long Flutes Morse Taper#4 Shank MT4 4MT. Feel free to ask any questions. SCT140930-01
Buy It Now
$5.15 Shipping Condition: New Location: Carmi, United States NEW Westward brand (high quality import) #2 Taper shank drill bit with .594 dia. cut. Have (4) pieces. Price is for one, with quantity discounts shown.
Buy It Now
$32.20 Shipping Condition: Used Location: Dayton, United States Manufacturer: PTD. MORSE TAPER #4 (MT4). LOC & OAL DRILL BIT. 17" OVERALL LENGTH. 10" LENGTH OF CUT. Condition: Used.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
$8.65 Shipping Condition: New Location: Lansing, United States Product Condition: New.
Buy It Now
Free Shipping Condition: New Location: Las Vegas, United States Taper shank drills are made to fit Morse tapered holes.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Larger Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
$6.45 Shipping Condition: New Location: Sheboygan Falls, United States MT4 - Wall Mount Drill Rack. Morse Taper Shank Drills. Suggestion: First attach a board to the wall-studs, then attach the rack. There is a tap and tap-drill ... morerack available as well. Holds 6 Drill Bits or other tooling.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
$10.60 Shipping Condition: Used Location: Elkin, United States Lot of 6 MT2 drill bits. High quality drills in excellent condition showing little use. R4. Thanks for looking!!!!!!
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States HSS MORSE TAPER SHANK DRILL#H108 ITEM(S) 1 pc. Industrial Grade HSS Morse Taper Shank Drilll in Size 23MM- MT2, APPLICATION For Direct Mounting in Drilling ... moreand Milling Machine Spindles and in Lathe Tailstocks, SPECIFICATION HSS for Drilling Low Carbon and Non Ferrous Materials, Drilling of Stainless Steel and Alloys at Low Feedrates 118° Chisel Edge, Black Oxide Finish, Shank with Tang from Morse Taper#1 to#4, Drill Sizes Available from 13mm to 40mm in 0.5mm Increments: Cutting Ø. Overall Length. Shank Size(mm) 13. 182. MT1. 13.5. 189. 14. 189. MT2. 14.5. 212. 15. 212. 15.5. 218. 16. 218. 16.5. 223. 17. 223. 17.5. 228. 18. 228. 18.5. 233. 19. 233. 19.5. 238. 20. 238. 20.5. 243. 21. 243. 21.5. 248. 22. 248. 22.5. 253. 23. 253. 23.5. 276. MT3. 24. 281. 24.5. 281. 25. 281. 25.5. 286. 26. 286. 26.5. 286. 27. 291. 27.5. 291. 28. 291. 28.5. 296. 29. 296. 29.5. 296. 30. 296. 30.5. 301. 31. 301. 31.5. 301. 32. 334. MT4. 32.5. 334. 33. 334. 33.5. 334. 34. 339. 34.5. 339. 35. 339. 35.5. 339. 36. 344. 36.5. 344. 37. 344. 37.5. 344. 38. 349. 38.5. 349. 39. 349. 39.5. 349. 40. 349. You Can Find More Machine Tools in Our eBay Store We Stock A Large Selection Of Tools And Machines So Ask If You Can't Find It in The Shop! PAYMENT& SHIPPING For Payment We Accept PayPal& Any Major Credit Card Via PayPal. We Ship Out Twice Weekly. The Standard Shipping Method Is As Registered Airmail By Hong Kong Post. We Will Inform You The Package Number. The Package Is Delivered To You By Your National Postal Service. The World-Wide Average Delivery Time Is 2-3 Weeks. If It Takes Longer Then Please Enquire At Your Local Post Office Or Check The Status Online If Tracking Of Inbound International Mail Is Available In Your Country. Optional Express 4-5 Days Courier Service Is Available For Most Destinations At Added Cost. Also Low Cost Surface Mail Shipping With Transit Time Of 6-9 Weeks Can Be Arranged For Heavy Items. Ask Us For A Quote. In EU. Especially In UK, Italy And Germany, The Customs Occasionally Hold A Small Percen
Buy It Now
$26.53 Shipping Condition: New Location: South Hackensack, United States RETAIL FOR $258.64 NEW OLD STOCK CLEVELAND CLE-LINE MT 4 GP TAPER SHANK DRILL 1 1/2 C20571 HIGH SPEED STEEL BLACK OXIDE 15 5/8" OVER ALL LENGTH 7 ... more7/8" FLUTE LENGTH 118 DEGREE DRILL POINT MADE IN USA SEE PHOTOS FAST SHIPPING PLEASE EMAIL FOR COMBINED SHIPPING Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Looks pretty good. Sorry. We cannot ship internationally.
Buy It Now
$6.00 Shipping Condition: Used Location: Wrightstown, United States I may but only on a case by case basis. I will do the very best I can to be accommodating!
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Item. Morse Taper Shank Twist Drill Bit for steel Manufacturer. Cle-Forge Cleveland Twist Drill Co. Made in the US America Diameter. 1-15/32" 1.468" ... moreShank Size. Morse Taper#4 Overall Length. 10-3/4" Flute Length. 4-1/2" Type. 2 Flute hs hss high speed steel SPLIT POINT Tip Condition. Good sharp used This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ
Buy It Now
Free Shipping Condition: New Location: Des Moines, United States Shank Size : MT2. Shank Type : Taper. Point Angle (DEG) : 118. Hardness : 14 to 30 HRC. Process : Surface Treated. Material : HSS. Flute Type : Spiral.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Standard Shank. 118 Degree Point. Includes 2 pieces. Overall Length" 9-3/4".
Buy It Now
Free Shipping Condition: Used Location: Troy, United States Here is something different and old. 2 drill collets with a#1 Morse taper. One is for a bit.200 Dia. and one is for a.344 Dia. bit. Some light corrosion ... moreto remove. Weight is 2.2 oz and they will be sent at the first class rate. We gladly combine shipping.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 9936 E Rush St.
Buy It Now
$8.95 Shipping Condition: New Location: Sheboygan Falls, United States Holds 17 #4 Morse Taper drill bits.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
$17.78 Shipping Condition: New Location: Saint Louis, United States We are happy to help.
Buy It Now
Free Shipping Condition: New Location: Wolcottville, United States #2 Morse Taper Shank Drill Bit. A semi truck can not easily pull into and turn around. Size: Length: 13 in. Width: 1 in. Height: 1 in. 12 Overall Length. ... moreCondition: New.
Buy It Now
$30.90 Shipping Condition: New Location: Akron, United States 20" Overall Length. 10-5/8" Usable Flute Length.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States MALCUS 2-1/4" HSS Drill Bit MT5 Taper shank needs resharpening has nicks see pics
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Looks pretty good. Sorry. We cannot ship internationally.
Buy It Now
$30.37 Shipping Condition: New Location: South Hackensack, United States PRECISION TWIST DRILL- New Surplus- NEW OLD STOCK- 1 3/8" High Speed Steel 9 1/2" Long Flutes and 15" Overall Length MT4 Morse Taper#4 ... moreShank Drill Bit This great PTD 4MT or#4 Morse Taper Shank Drill Bit currently retails for at or above $150. This one has never been used and includes fast free shipping in the U.S.A. too! Proudly Made in the U.S.A. Precision Drill Bits are well known for standing the test of time! Please check the pictures carefully for the exact age and condition. IT'S UNUSED NEW OLD STOCK IN THE ORIGINAL BOX Thank you for looking and Insured Priority Mail Shipping is Fast and Free in the U.S.A.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MORSE TAPER #2 (MT2). MORSE TAPER DRILL BIT. LOC & OAL 4" LENGTH OF CUT. Condition: Used. SOLD BY M & J TOOLING LLC.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States MORSE TAPER #2 (MT2). DOUBLE MARGIN DRILL BIT. Manufacturer: PRECISION TWIST DRILL CO. PRECISION TWIST DRILL CO. 5 3/4 LENGTH OF CUT. Condition: New. ... more10" OVERALL LENGTH.
Buy It Now
$8.90 Shipping Condition: New Location: Lorain, United States Up for sale is aPro-Cut 9/16" (.5625") HSS Taper Shank Drill Bit: 8-3/4" OAL, Morse Taper #2 (MT2 2MT).
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States All Auctions Start at $3.99! No international bidding/shipping at this time. Customers shipping to a USA-addressed forwarding company are subject to cancelation. ... moreThank you for your cooperation and compliance. Good luck on your bidding! Inventory Number: 12141044113 Manufacturer: Description: NATIONAL 2-1/16"DIAMETER HSS DRILL. MT5 SHANK, MORSE TAPER#5 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, LENGTH: 15-1/2" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payment& Taxes: Payment MUST be received within 5 business days of auction's end. Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing under 50 pounds. We only accept PAYPAL for our auction items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna for instructions on how to supply us with a tax exempt form via fax or email. The invoice will automatically charge tax and you will need to notify us PRIOR to payment to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. Shipping: We ONLY combine items won within the same calendar week(Monday-Friday) We cannot issue shipping refunds after payment has been made. To receive a combined shipping rate you must contact us for a combined invoice. PRIOR to payment. Payment MUST still be received within 5 business days of auction end. All orders over $100 will require a UPS Delivery Signature Confirmation. Local pick up is available during eBay Department business hours Monday-Friday 8AM- 3PM(holiday hours vary. Please call) Saturday pick up requires 24 hour notice. Items must be paid through PAYPAL prior to pick up. If you need to make pick up arrangements outside of our business hours, please call 440-668-4517. Items MUST be picked up within ONE WEEK of payment. We do not falsify customs declaration values of purchased items for international shipments. Cross-border buyers are responsible
Buy It Now
Free Shipping Condition: New Location: Miami, United States 118° Point. High Speed Steel. Overall Length - 8-1/2".
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States MT4 Capital made in ENGLAND HSS over all length 13 1/4 cutting diameter 1 5/8 this is a(USE) drill bit. Possibly in need of sharpening. No longer of use ... moreto our Milling machines. Check out all photos and make sure this is what your in need. Since this item is not refundable
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Used- 1-3/16" HSS, 4 MT, Drill Bit- Morse Manufacture: Morse Countryof Origin: USA Diameter: 1-3/16" MT Shank: 4MT Number ofFlutes: 2 FluteLength: ... more7-1/2" OverallLength: 13" ToolMaterial: HSS Tool Finish: Oxide Condition: Used. In very good conditions. Shipping: Shipping is free in United States. Except for Hawaii and Alaska. I sold my machine shop over 10 years ago and these tools were in astorage that I had. Tools have not beenused in more than 10 years. Any questions feel free to contact me(Phil) at 831-704-6187.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Smaller Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States OAL : 7 3/4".
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MORSE TAPER #3 (MT3). LOC & OAL DRILL BIT. 8 1/4 LENGTH OF CUT. Condition: Used. SOLD BY M & J TOOLING LLC.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Larger Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MORSE TAPER #4 (MT4). Manufacturer: CLEVELAND TWIST DRILL CO. CLEVELAND TWIST DRILL CO. DRILL BIT. Condition: Used. SOLD BY M & J TOOLING LLC.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Manufacturer: PTD. MORSE TAPER #2 (MT2). DOUBLE MARGIN DRILL BIT. 5 3/4 LENGTH OF CUT. Condition: New. 10" OVERALL LENGTH. SOLD BY M & J TOOLING LLC.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Item. Morse Taper Shank Twist Drill Bit for steel Manufacturer. NPTD Precision twist drill co. Made in the US America Diameter. 1/2" Shank Size. ... moreMorse Taper#2 Overall Length. 7" Flute Length. 3" Type. 2 Flute hs hss high speed steel Condition. Nice very sharp used. The tip is ground to a split point This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ M
Buy It Now
Free Shipping Condition: Used Location: Grand Rapids, United States Morse Taper Shank Twist Drill Bit for cutting steel. Shank Size. Morse Taper #4. 2 Flute hs hss high speed steel. Flute Length. 4.5". Condition. Nice ... moresharp used ready to use and the shank and the flutes.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Here is a Good sharp used Drill Item. Morse Taper Shank Twist Drill Bit for steel Manufacturer. Most by ATM Company some by National Twist Drill Co. all ... moreare Made in the US America Diameter. 11/16" Shank Size. Morse Taper#2 Overall Length. Ranges from 8-1/2" to 9-1/4" Flute Length. Ranges 4" to 5" Type. 2 Flute hs hss high speed steel Split pointed tip This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile Rd. NW Grand Rapids. MI 616-791-9395
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Shank: MT2. Standard Shank. 118 Degree Point. Overall Length: 8-3/4".
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MORSE TAPER #5 (MT5). LOC & OAL Manufacturer: MORSE. DRILL BIT. 4 1/4 LENGTH OF CUT. Condition: Used. SOLD BY M & J TOOLING LLC.
Buy It Now
Free Shipping Condition: Used Location: Grand Rapids, United States GTD Greenfield Tap and Die Co USA. Morse Taper Shank Twist Drill Bit for steel 118 degree tip. Shank Size. Morse Taper #4. 2 Flute hs hss high speed steel. ... moreand the taper shank is also in excellent.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Here is a Good sharp used Drill Item. Morse Taper Shank Twist Drill Bit for steel Manufacturer. Most by ATM Company some by National Twist Drill Co. all ... moreare Made in the US America Diameter. 11/16" Shank Size. Morse Taper#2 Overall Length. Ranges from 8-1/2" to 9-1/4" Flute Length. Ranges 4" to 5" Type. 2 Flute hs hss high speed steel Split pointed tip This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile Rd. NW Grand Rapids. MI 616-791-9395
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MORSE TAPER #5 (MT5). LOC & OAL DRILL BIT. 5" LENGTH OF CUT. Condition: Used. SOLD BY M & J TOOLING LLC.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Standard Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States RETAIL FOR $ 35.33 NEW OLD STOCK PRECISON TWIST DRILL CO. TWIST DRILL TAPER SHANK MORSE TAPER#2 33/64 STYLE 209 STOCK NO. 20033 BRIGHT 8 3/4" OVER ... moreALL LENGTH 4 5/8" FLUTE LENGTH 118 DEGREE DRILL POINT HIGH SPEED STEEL MADE IN USA SEE PHOTOS FAST SHIPPING PLEASE EMAIL FOR COMBINED SHIPPING Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States High Speed Steel, Smaller Shank, 118 Degree Point. General purpose flute construction for use in wide variety of materials.
Buy It Now
Free Shipping Condition: New Location: Miami, United States 118° Point. High Speed Steel. Overall Length - 9-3/4".
Buy It Now
$15.00 Shipping Condition: Used Location: Fairfield, United States SHANK: #4MT. DRILL IS SHARP. CONDITION: LIGHT USED, IF AT ALL.
Buy It Now
$13.00 Shipping Condition: Used Location: Fairfield, United States SHANK: #5MT. NICKS THROUGHOUT DRILL AND TAPER SHANK. CONDITION: WELL USED.
|
|
4 MORSE TAPER SHANK 1 5/16" x 13 1/2" DRILL BIT lathe mill mt tool LSI USA
sharp used 4 morse taper shank drill- flatnose LSI USA 1 5/16" x 13 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
4 MORSE TAPER SHANK 1 9/32" x 12 1/2" DRILL BIT lathe mill mt
sharp used 4 morse taper shank drill mfg not marked 1 9/32" x 12 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e765b5b86-0x106-
|
|
4 MORSE TAPER SHANK 1 9/32" x 14 1/2" DRILL BIT lathe mill mt UNION BUTTERFIELD
sharp used 4 morse taper shank drill Union Butterfield USA 1 9/32" x 14 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
USED TAPER SHANK DRILL 57/64" X 9-1/4" X 5-1/4" FLUTE MT#2 HSS USA 1058
YOU ARE BIDDING ON ONE USED TAPER SHANK DRILL 57/64" X 9-1/4" X 5-1/4" FLUTE MT#2 HSS USA CLEVELAND DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 1/4 2.25 Morse Brand 4 MT Taper Shank 4MT Drill, No Reserve!!
2 1/4 2.25 Morse Brand 4 MT Taper Shank 4MT Drill. No Reserve! This drill bit is in good condition. Drills this large are hard to find and expensiv e with the reduced shank. See the photos for deta ils. I can ship this drill Economy to the Continenta l USA only for $12.95. PayPal only. No International shipping. Shipments to California addresses will be subject to sales tax. Please research your purchase carefully as there are no returns or refunds.
|
|
4 MORSE TAPER SHANK 1 7/8" x 14 1/2" DRILL BIT lathe mill mt tool OZ
good used 4 morse taper shank drill marked OZ 1 7/8" x 14 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
4 MORSE TAPER SHANK 2 5/16" x 12" DRILL BIT lathe mill mt tool YUGOSLAVIA
good used 4 morse taper shank drill Yugoslavia 1 5/16" x 12" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
1 7/16" Morse Taper No.4 MT Shank Drill Bit 13 1/2" OAL (142)
1 7/16" Morse Taper No.4 MT Shank Drill Bit 13 1/2" OAL(142) SPECIFICATIONS: Brand: NA Country of Origin: NA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 13 1/2" Length of Flute(nearest 1/4" 7 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit number ... morein title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16142 B354 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 221
|
|
1 7/64" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL (903)
1 7/64" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL(903) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 12 1/2" Length of Flute(nearest 1/4" 6 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16903 B360 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye In
|
|
2 17/32" Morse Taper No.5 MT Shank Drill Bit 23 1/4" OAL (007)
2 17/32" Morse Taper No.5 MT Shank Drill Bit 23 1/4" OAL(007) SPECIFICATIONS: Brand: NA Country of Origin: NA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 23 1/4" Length of Flute(nearest 1/4" 8 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) Has adapter welded to shank. All pictures of the exact bit ... moreyou will receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D17007 B359 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bulls
|
|
1 3/8" Morse Taper No.4 MT Shank Drill Bit 11 1/2" OAL (930)
1 3/8" Morse Taper No.4 MT Shank Drill Bit 11 1/2" OAL(930) SPECIFICATIONS: Brand: National Rochester. MI Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 11 1/2" Length of Flute(nearest 1/4" 5 3/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will ... morereceive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16930 B359 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Indust
|
|
1 3/16" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL (344)
1 3/16" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL(344) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 12 1/2" Length of Flute(nearest 1/4" 6 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16344 B359 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye In
|
|
1 5/16" Morse Taper No. 4 MT Shank Drill Bit 11 1/2" OAL (333)
1 5/16" Morse Taper No. 4 MT Shank Drill Bit 11 1/2" OAL(333) SPECIFICATIONS: Brand: Chicago Latrobe Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 11 1/2" Length of Flute(nearest 1/4" 4 3/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive ... more3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16333 B360 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial
|
|
1 15/32" Morse Taper No. 4 MT Shank Drill Bit 14 1/2" OAL (341)
1 15/32" Morse Taper No. 4 MT Shank Drill Bit 14 1/2" OAL(341) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 14 1/2" Length of Flute(nearest 1/4" 8 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16341 B365 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye
|
|
1 5/32" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL (161)
1 5/32" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL(161) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 12 1/2" Length of Flute(nearest 1/4" 6 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16161 B365 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye In
|
|
2 3/32" Morse Taper No.5 MT Shank Drill Bit 16 3/4" OAL (972)
2 3/32" Morse Taper No.5 MT Shank Drill Bit 16 3/4" OAL(972) SPECIFICATIONS: Brand: Cleforge Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 16 3/4" Length of Flute(nearest 1/4" 9" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16972 B366 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 2
|
|
2 1/16" Morse Taper No.5 MT Shank Drill Bit 22 3/4" OAL (506)
2 1/16" Morse Taper No.5 MT Shank Drill Bit 22 3/4" OAL(506) SPECIFICATIONS: Brand: National Detroit Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 22 3/4" Length of Flute(nearest 1/4" 15" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive ... more3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D18506 B349 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sal
|
|
4" Morse Taper No.6 MT Shank Drill Bit 24 1/2" OAL (148)
4" Morse Taper No.6 MT Shank Drill Bit 24 1/2" OAL(148) SPECIFICATIONS: Brand: Chicago Latrobe Morse Taper Shank: No. 6 Overall Length: 24 1/2" Length of Flute: 13" No of Flutes: 2 Drill Point Angle: 90 degree Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. All pictures of the exact bit you will receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus ... moreindustrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D15148 B359 weight: 37 lbs PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 221 US Highway 20 Middlebury. IN 46540 SHIPPING: We ship USPS& UPS ground. We choose which carrier. We w
|
|
1 33/64" Morse Taper No.4 MT Shank Drill Bit 16 1/2" OAL (604)
1 33/64" Morse Taper No.4 MT Shank Drill Bit 16 1/2" OAL(604) SPECIFICATIONS: Brand: NA Country of Origin:NA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 16 1/2" Length of Flute(nearest 1/4" 9" No of Flutes:2 Drill Point Angle: 135 Degree Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(Sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J15604 B352 Weight: 5 PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales.
|
|
1 33/64" Morse Taper No. 4 MT Shank Drill Bit 16 1/2 " OAL (603)
1 33/64" Morse Taper No. 4 MT Shank Drill Bit 16 1/2" OAL(603) SPECIFICATIONS: Brand: NA Country of Origin:NA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 16 1/2" Length of Flute(nearest 1/4" 9" No of Flutes: 2 Drill Point Angle: 135 degree Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(Sharp& ready to use) Notes: All pictures of the exact bit you will receive ... more3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J15603 B352 Weight: 5 PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industri
|
|
1 33/36" Morse Taper No. 4 MT Shank Drill Bit 16 1/2" OAL (602)
1 33/36" Morse Taper No. 4 MT Shank Drill Bit 16 1/2" OAL(602) SPECIFICATIONS: Brand: NA Country of Origin: NA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 16 1/2" Length of Flute(nearest 1/4" 9" No of Flutes: 2 Drill Point Angle: 135 degree Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(Sharp& ready to use) may have slight surface rust, All pictures of the exact ... morebit you will receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J 15602 B353 Weight: 5 PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial
|
|
1 9/16" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL(532)
1 9/16" Morse Taper No.4 MT Shank Drill Bit 12 1/2" OAL(532) SPECIFICATIONS: Brand: Cleforge Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 12 1/2" Length of Flute(nearest 1/4" 6 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D18532 B368 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. L
|
|
2 3/16" Morse Taper No.5 MT Shank Drill Bit 13 3/4" OAL (500)
2 3/16" Morse Taper No.5 MT Shank Drill Bit 13 3/4" OAL(500) SPECIFICATIONS: Brand: Cleforge Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 13 3/4" Length of Flute(nearest 1/4" 6" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D18500 B370 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 2
|
|
UTD MT 2 TAPER SHANK DRILL 118 DRILL POINT 3/4 BLACK OXIDE HIGH SPEED
USED IN GOOD CONDITION UTD MT 2 TAPER SHANK 3/4 9" OVER ALL LENGTH 4 3/4" FLUTE LENGTH 118 DEGREE DRILL POINT BLACK OXIDE HIGH SPEED SEE PHOTOS FAST SHIPPING PLEASE EMAIL FOR COMBINED SHIPPING Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
1 3/4" Morse Taper No.5 MT Shank Drill Bit 23 1/2" OAL (677)
1 3/4" Morse Taper No.5 MT Shank Drill Bit 23 1/2" OAL(677) SPECIFICATIONS: Brand: NA Country of Origin: NA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 23 1/2" Length of Flute(nearest 1/4" 16" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit number ... morein title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J18677 B355 PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 14489 US Hi
|
|
2 13/16" Morse Taper No.5 MT Shank Drill Bit 20 3/4" OAL (674)
2 15/16" Morse Taper No.5 MT Shank Drill Bit 20 3/4" OAL(674) SPECIFICATIONS: Brand: ATM Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 20 3/4" Length of Flute(nearest 1/4" 12 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J18674 B374 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC
|
|
1 19/32" Morse Taper No.4 MT Shank Drill Bit 15 1/2" OAL (551)
1 19/32" Morse Taper No.4 MT Shank Drill Bit 15 1/2" OAL(551) SPECIFICATIONS: Brand: na Country of Origin: NA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 15 1/2" Length of Flute(nearest 1/4" 9" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit number ... morein title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J18551 B357 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 14489 U
|
|
2 3/4" Morse Taper No.5 MT Shank Drill Bit 15" OAL (001)
2 3/4" Morse Taper No.5 MT Shank Drill Bit 15" OAL(001) SPECIFICATIONS: Brand: Cleforge Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 15" Length of Flute(nearest 1/4" 6" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit number in ... moretitle is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D17001 B359 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 221 US Hig
|
|
1 21/64" Morse Taper No.4 MT Shank Drill Bit 14 1/2" OAL (900)
1 21/64" Morse Taper No.4 MT Shank Drill Bit 14 1/2" OAL(900) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 14 1/2" Length of Flute(nearest 1/4" 8 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16900 B360 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye I
|
|
1 1/8" Morse Taper No.4 MT Shank Drill Bit 10 1/2 " OAL (152)
1 1/8" Morse Taper No.4 MT Shank Drill Bit 10 1/2" OAL(152) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 10 1/2" Length of Flute(nearest 1/4" 4 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16152 B365 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Ind
|
|
1 3/32" Morse Taper No. 4 MT Shank Drill Bit 11 1/2 " OAL (150)
1 3/32" Morse Taper No. 4 MT Shank Drill Bit 11 1/2" OAL(150) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 11 1/2" Length of Flute(nearest 1/4" 5 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16150 B365 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye I
|
|
2 1/8" Morse Taper No.5 MT Shank Drill Bit 12 1/4" OAL (954)
2 1/8" Morse Taper No.5 MT Shank Drill Bit 12 1/4" OAL(954) SPECIFICATIONS: Brand: Chicago Latrobe Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 12 1/4" Length of Flute(nearest 1/4" 4 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive ... more3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16954 B365 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sa
|
|
1 3/32" Morse Taper No.4 MT Shank Drill Bit 10 1/2 " OAL (146)
1 3/32" Morse Taper No.4 MT Shank Drill Bit 10 1/2" OAL(146) SPECIFICATIONS: Brand: Cleforge Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 10 1/2" Length of Flute(nearest 1/4" 4 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16146 B366 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. L
|
|
1 5/64" Morse Taper No. 4 MT Shank Drill Bit 12 1/2" OAL (144)
1 5/64" Morse Taper No. 4 MT Shank Drill Bit 12 1/2" OAL(144) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 12 1/2" Length of Flute(nearest 1/4" 6 1/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16144 B366 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye I
|
|
1 5/32" Morse Taper No. 4 MT Shank Drill Bit 11 1/2 " OAL (910)
1 5/32" Morse Taper No. 4 MT Shank Drill Bit 11 1/2" OAL(910) SPECIFICATIONS: Brand: PTD Precision Twist Drill Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 11 1/2" Length of Flute(nearest 1/4" 5 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you ... morewill receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16910 B371 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye I
|
|
2 5/16" Morse Taper No.5 MT Shank Drill Bit 14 3/4 " OAL
2 5/16" Morse Taper No.5 MT Shank Drill Bit 14 3/4" OAL SPECIFICATIONS: Brand: Chicago Latrobe Country of Origin: USA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 14 3/4" Length of Flute(nearest 1/4" 6 3/4" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 ... moredigit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16943 B378 PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LL
|
|
4 MORSE TAPER SHANK 1 1/2" x 20" DRILL BIT lathe mill mt tool WHITMAN & BARNES
good used 4 morse taper shank drill Whitman& Barnes USA"hercules" 1 1/2" x 20" long minor pitting on taper please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
4 MORSE TAPER SHANK 1 3/8" x 18 1/2" DRILL BIT lathe mill mt tool CELFOR USA
good used 4 morse taper shank drill Celfor USA 1 3/8" x 18 1/2" long tang has been repaired please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
1 11/32" Morse Taper No.4 MT Shank Drill Bit 9 1/2 " OAL (342)
1 11/32" Morse Taper No.4 MT Shank Drill Bit 9 1/2" OAL(342) SPECIFICATIONS: Brand: National Detroit Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 9 1/2" Length of Flute(nearest 1/4" 3 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive ... more3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16342 B377 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial S
|
|
1 1/8" Morse Taper No. 4 MT Shank Drill Bit 8 1/2" OAL (913)
1 1/8" Morse Taper No. 4 MT Shank Drill Bit 8 1/2" OAL(913) SPECIFICATIONS: Brand: Cleforge Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 8 1/2" Length of Flute(nearest 1/4" 2 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16913 B377 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC
|
|
1 13/32" Morse Taper No.4 MT Shank Drill Bit 14 1/2" OAL (922)
1 13/32" Morse Taper No.4 MT Shank Drill Bit 14 1/2" OAL(922) SPECIFICATIONS: Brand: NA Country of Origin: NA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 14 1/2" Length of Flute(nearest 1/4" 8 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in good condtion. Could use a resharpening(Good Flutes/ No major chips on edge) All pictures of the ... moreexact bit you will receive 3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D16922 B377 RT PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales
|
|
2 13/16" Morse Taper No.5 MT Shank Drill Bit 20 1/4" OAL (484)
2 13/16" Morse Taper No.5 MT Shank Drill Bit 20 1/4" OAL(484) SPECIFICATIONS: Brand: LBS Country of Origin: NA Morse Taper Shank: No. 5 Overall Length(nearest 1/4" 20 1/4" Length of Flute(nearest 1/4" 11 1/2" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive 3 digit ... morenumber in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. D18484 B364 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sales. LLC 2
|
|
1 41/64" Morse Taper No.4 MT Shank Drill Bit 15 1/2" OAL (559)
1 41/64" Morse Taper No.4 MT Shank Drill Bit 15 1/2" OAL(559) SPECIFICATIONS: Brand: National Detroit Country of Origin: USA Morse Taper Shank: No. 4 Overall Length(nearest 1/4" 15 1/4" Length of Flute(nearest 1/4" 9" No of Flutes: 2 Drill Point Angle: 135 Tool Matial: High Speed Steel(HSS: M1. M2, M7, M50) Combines good tool life& productivity with minimal cost. Works well in free cutting& carbon steels, as well as soft, non-ferrous materials like aluminum, brass, bronze& copper. Able to handle less than ideal set-ups. Tool Coating or Surface Treatment: Black Oxide(Surface treated) retains lubricants to aid in wear resistance& chip flow. Not to be used in non-ferrous materials. Condition Bit is used& in great condition(sharp& ready to use) All pictures of the exact bit you will receive ... more3 digit number in title is for Bullseye reference only. All the info is to the best of our knowledge. We are used& surplus industrial equipment dealers-not drill bit manufacturers. There are no guarantees to the accurateness of this information-though we strive to be accurate. For combined shipping on drill bits. Click"buy it now" on ALL drill bits you want, then wait for us to combine the shipping BEFORE paying. DO NOT pay before we combine the shipping& then expect a refund, we will not do that. Bullseye Cat. J18559 B357 rt PLEASE READ: Indiana Buyers: 7% sales tax will be added to the item price for items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am-5pm@ 574-825-4990. This item is surplus. The box or item may show signs of dust, wear, writing, scratches. Grease from storage, tape, or slight surface rust. All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay stores Bullseye Industrial Sales. Bullseye Industrial Sal
|
|
3 MORSE TAPER 3/4" x 7 1/2" DRILL lathe bit press mill mt tool NATIONAL USA
sharp used 3 morse taper shank drill National USA 3/4" x 7 1/2" long dings on taper please check my other auctions and happy bidding! we are always happy to combine items for the cheapest shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 MORSE TAPER 3/4" x 13 1/4" DRILL BIT lathe mt mill tool PTD USA - EXTRA LONG
sharp used 2 morse taper shank drill bit- xtra long Precision Twist Drill USA 3/4" x 13 1/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
4 MORSE TAPER SHANK 1 1/8" x 11 1/2" DRILL BIT lathe mill mt tool ATM USA
good used 4 morse taper shank drill ATM USA USA 1 1/8" x 11 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
4 MORSE TAPER SHANK 1 1/8" x 12 1/2" DRILL BIT lathe mill mt tool CLE-FORGE USA
good used 4 morse taper shank drill Cle-Forge USA 1 1/8" x 12 1/2" long minor dings on taper please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
4 MORSE TAPER SHANK 1 1/2" x 13 1/2" DRILL BIT lathe mill mt tool CLE-FORGE USA
good used 4 morse taper shank drill- flatnose Cle-Forge USA 1 1/2" x 13 1/2" long spin marks on taper please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-14017fb4543-0x106-
|
|
4 MORSE TAPER SHANK 1 15/16" x 13 1/2" DRILL BIT lathe mill mt tool 1TW HSS
good used 4 morse taper shank drill 1TW HSS 1 15/16" x 13 1/2" long minor dings on taper please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
3 MORSE TAPER 3/4" x 10 1/2" DRILL lathe bit press mill mt tool CHINA HSS
sharp used 3 morse taper shank drill. china HSS 3/4" x 10 1/2" long has pitting on the taper please check my other auctions and happy bidding! we are always happy to combine items for the cheapest shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 - 4 MORSE TAPER ADAPTER SLEEVE drill lathe mill mt tool holder ETM
good used morse taper adapter sleeve 2- 4 MT ETM will ship for $5.80 anywere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
LOT TWENTY #2 & #1 MORSE TAPER MT DRILL BITS 29/32" - 1/4" W/ 2 ADAPTOR SLEEVES
LOT OF 20 USED#2 AND#1 MORSE TAPER DRILL BITS Sizes: 2 MORSE 29/32" 49/64" 47/64" 21/32" 5/8" 39/64" 37/64" 35/64" 9/16" 17/32" THREE 1/4" SIZES: 1 MORSE 15/32" 29/64" 27/64" 25/64" 5/16" TWO UNMARKED PLUS TWO MORSE TAPER ADAPTORS SLEEVES. 1-2 SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: Calculated Rate All Others: Calculated Rate NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick ... morethe item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority Mail International Rates are reflected in our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
2 MORSE TAPER 3/4" x 8 1/4" CORE DRILL lathe bit press mill mt tool UTD USA
sharp used 2 morse taper shank drill- core drill- 4 flute Union Twist Drill USA 3/4" x 8 1/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 MORSE TAPER 51/64" x 10 1/4" DRILL lathe bit press mill mt tool HSS
sharp used 2 morse taper shank drill marked HSS 51/64" x 10 1/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 MORSE TAPER 31/64" x 7 1/4" DRILL lathe bit press mill mt tool CELFOR USA
sharp used 2 morse taper shank drill Celfor USA 31/64" x 7 1/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1440c56a6bc-0x100-
|
|
2 MORSE TAPER 23/32" x 9 3/4" DRILL lathe bit press mill mt tool NATIONAL USA
sharp used 2 morse taper shank drill National USA 19/32" x 9 3/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
2 MORSE TAPER 13/32" x 6 3/4" DRILL lathe bit press mill mt tool UTD USA
sharp used 2 morse taper shank drill Union Twist Drill USA 13/32" x 6 3/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|