Buy It Now
$3.59 Shipping Condition: Brand New Location: China Cutting Radius: 1/16"Cutting Diameter: 1/8"Shank Diameter: 1/8"Cutting Length: 1"Total Length: 3"Material: Tungsten Carbide (Solid Carbide)Finish: TiAlN ... moreCoatedNumber of Flutes: 4End Cut Type: Ball EndPackage Included: 1pcs x Ball Nose End MillDescriptions:Four-edged ball nose design, suitable for semi-finishing and finishing of various curved surfaces and arc grooves; Ball end mills can perform chamfer milling on steep/straight walls and contoured surfaces. Suitable for carbon steel, malleable cast iron, alloy steel, stainless steel, etc.TiAlN (titanium aluminum nitride) coating combines high hardness, enhanced lubricity and improved heat resistance to perform well under high temperature cutting conditions and provide good wear resistance. Used for machining tough materials such as hardened steel.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification?? 1/4" 4 FLUTE SE REGULAR BALL NOSE SOLID CARBIDE END MILL 3/4" LENGTH OF CUT 2-1/2" OVERALL LENGTH 1/4" SHANK DIAMETER TiALN COATED Package ... moreincluding?? Mills 5 Pieces 1/4" 4 Flutes 3/4" Cut Length 2-1/2" Overall Length 1/4" Rod Diameter Brand ALL-CARB MPN Does Not Apply Warranty 1 year Item Type End Mill Flutes 4-Flute Shank Diameter 1/4 " Overall Length 2 - 1/2" Length Of Cut 3/4" Quantity 5 Helix Angle 30° Helix UPC Does not apply Custom Bundle No Bundle Description No Modified Item No Modification Description No.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Alternate Manufacture # 16655. •2 Flute End Mill •Center Cutting •Stub Length •30 Degree Helix. Overall Length (OAL) 2-1/2″ Length Group Stub. Depth ... moreof Cut Maximum (APMX) 5/8″ Tool Type Center Cut|High Performance.
Buy It Now
$5.99 Shipping Condition: New Location: Minooka, United States The bright finish on these end mills provides a smooth, polished surface. MICRO 100 BEM-062-04. Grainger reserves the right to accept or reject any order. ... moreDiversion contrary to U.S. law is prohibited.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Coating DLC Style Ball Nose. Overall Length (OAL) 3″ End Shape Ball Nose. Depth of Cut Maximum (APMX) 0.281″ Body Half Taper Angle (BHTA) 30 Degrees. ... moreFlute Count (NOF) 3 Decimal Equivalent 0.187″. Shank Type Round.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States Fastenal Part No. Shank Style Non-Weldon Flat. Helix Angle 30°. Type Finishing Ball Nose End Mill. End Style Double End. Length of Cut (decimal) 0.6250. ... moreLength of Cut (in) 5/8". Length of Cut (mm) 15.875.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States Our part # YG1-EH250004S.
Buy It Now
$21.54 Shipping Condition: Brand New Location: Broadford, Australia 5% COBALT - HIGH QUALITY GRADE SLOTDRILLS. STRAIGHT SHANK BALLNOSE SLOTDRILLS NOW AVAILABLE SINGULARLY. APRICA BALL. 20MM 20MM 48MM 92MM. MADE FROM HSS ... moreWITH 5% Cobalt M35 ADDED TO GIVE THAT EXTRA GRUNT FOR CUTTING.
Buy It Now
$8.99 Shipping Condition: New Location: Vernon Hills, United States YG-1 X-POWER PRO 30Deg Helix Y-Coated For Pre-Hardened Steels To HRc55. The X-POWER PRO exhibits higher hardness, heat resistance and wear resistance ... moreallowing for faster speeds, increased feed rates and superior workpiece finishes, suitable for wet or dry cutting.
Buy It Now
$16.05 Shipping Condition: New Location: Chino, United States 1/8-1/2" 6 Piece 4-Flute M2 Ball Nose End Mill Set. Full radius cutting edge. AIR, POWER & HAND TOOLS. High speed steel. Center Cut. Wooden stand included. ... moreSingle end. Get It Quick!
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 1/32 4FL SE Stub BN Carbide End Mill, 63003, Diameter: 1/32, Number of Flutes: 4, End Style: Ball Nose, Length of Cut: 1/16, Overall ... moreLength: 1-1/2, Shank Diameter: 1/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
$4.50 Shipping Condition: New Location: Largo, United States NEED PARTS FOR YOUR BRIDGEPORT?. Just let us send you updated invoice.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Coating nACo Style 270 Degrees Spherical Ball. Overall Length (OAL) 3″ End Shape Ball Nose. Depth of Cut Maximum (APMX) 0.16″ Neck Length (LN) 1″. Flute ... moreCount (NOF) 4 Decimal Equivalent 0.1875″.
Buy It Now
Free Shipping Condition: New Location: China Cutting Radius: 1/16"Cutting Diameter: 1/8"Shank Diameter: 1/4"Cutting Length: 15/16"Total Length: 2-1/2"Material: Tungsten Carbide (Solid Carbide)Finish: ... moreNano CoatedNumber of Flutes: 2End Cut Type: Ball EndPackage Included: 1pcs x Ball Nose End MillDescriptions:Double-edged ball nose design, suitable for semi-finishing and finishing of various curved surfaces and arc grooves; Ball end mills can perform chamfer milling on steep/straight walls and contoured surfaces. Suitable for carbon steel, malleable cast iron, alloy steel, stainless steel, etc.Blue nano coating provides enhanced performance and durability, further enhancing wear resistance, improving heat resistance, enhancing lubricity and extending tool life. This allows for smoother cuts and improved surface finish for clean, accurate cuts.
Buy It Now
$3.59 Shipping Condition: Brand New Location: China Cutting Radius: 1/16"Cutting Diameter: 1/8"Shank Diameter: 1/4"Cutting Length: 1-1/32"Total Length: 2-1/2"Material: Tungsten Carbide (Solid Carbide)Finish: ... moreNano CoatedNumber of Flutes: 2End Cut Type: Ball EndPackage Included: 2pcs x Ball Nose End MillDescriptions:Double-edged ball nose design, suitable for semi-finishing and finishing of various curved surfaces and arc grooves; Ball end mills can perform chamfer milling on steep/straight walls and contoured surfaces. Suitable for carbon steel, malleable cast iron, alloy steel, stainless steel, etc.Blue nano coating provides enhanced performance and durability, further enhancing wear resistance, improving heat resistance, enhancing lubricity and extending tool life. This allows for smoother cuts and improved surface finish for clean, accurate cuts.
Buy It Now
$3.59 Shipping Condition: Brand New Location: China Cutting Radius: 1/16"Cutting Diameter: 1/8"Shank Diameter: 1/8"Cutting Length: 3/8"Total Length: 1-1/2"Material: Tungsten Carbide (Solid Carbide)Finish: ... moreTiAlN CoatedNumber of Flutes: 4End Cut Type: Ball EndPackage Included: 1pcs x Ball Nose End MillDescriptions:Four-edged ball nose design, suitable for semi-finishing and finishing of various curved surfaces and arc grooves; Ball end mills can perform chamfer milling on steep/straight walls and contoured surfaces. Suitable for carbon steel, malleable cast iron, alloy steel, stainless steel, etc.TiAlN (titanium aluminum nitride) coating combines high hardness, enhanced lubricity and improved heat resistance to perform well under high temperature cutting conditions and provide good wear resistance. Used for machining tough materials such as hardened steel.
Buy It Now
$3.50 Shipping Condition: New Location: Fairfield, United States SINGLE END. 15/32x3/8x1x2-11/16. PART# 5-305-060. CONDITION- NEW.
Buy It Now
Free Shipping Condition: New Location: 新北区, China 4 Flute Flat End Mill. 2 Flute Ball Nose End Mill. 2 Flute Flat End Mill. 4 Flute Corner Radius End Mill. 3 Flute End Mill For Aluminum. 2 Flute End Mill ... moreFor Aluminum. Material:Tungsten steel. Single End.
Buy It Now
Free Shipping Condition: New – Open box Location: Chillicothe, United States Material - Cobalt. Shank Dia. Flue Length of Cut - 1-1/4". Made in KOREA. Finish / Coating - Uncoated.
Buy It Now
$5.00 Shipping Condition: New Location: Grandville, United States
Buy It Now
$8.99 Shipping Condition: New Location: Vernon Hills, United States YG-1 X-POWER PRO 30Deg Helix Y-Coated For Steels Up to HRc55. The X-POWER PRO exhibits higher hardness, heat resistance and wear resistance allowing for ... morefaster speeds, increased feed rates and superior workpiece finishes, suitable for wet or dry cutting.
Buy It Now
$21.54 Shipping Condition: Brand New Location: Broadford, Australia 5% COBALT - HIGH QUALITY GRADE SLOTDRILLS. STRAIGHT SHANK BALLNOSE SLOTDRILLS NOW AVAILABLE SINGULARLY. APRICA BALL. 20MM 20MM 48MM 92MM. MADE FROM HSS ... moreWITH 5% Cobalt M35 ADDED TO GIVE THAT EXTRA GRUNT FOR CUTTING.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 1/32 4FL SE Stub BN AlTiN Carbide End Mill, 63006, Diameter: 1/32, Number of Flutes: 4, End Style: Ball Nose, Length of Cut: 1/16, ... moreOverall Length: 1-1/2, Shank Diameter: 1/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: AlTiN
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: 5/8" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 1-1/4" LENGTH OF CUT 3-1/2" OVERALL LENGTH 5/8" SHANK DIAMETER POLISHED SHANK Package Including: ... more5/8" 4 FLUTE CARBIDE END MILL (As The Picture Shows) Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. .
Buy It Now
Free Shipping Condition: New Location: Denver, United States Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes. Rustless and anti-static, best performance with high precision,work ... moreperfect on milling or cutting machines. Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States Our part # YG1-E5249010S.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States End Mill, Cobalt, 1/8, 4 FL, SGL Ball End, CC. End Mill Cutting Type : Center Cutting End Mill Material : Cobalt. End Mill Application : Finishing Milling ... moreDia. End Mill Application: Finishing. Corner Radius : 0.000" Item : Ball End Mill.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Coating AlTiSiN Style 220 Degrees Spherical Ball. Overall Length (OAL) 4″ End Shape Ball Nose. Flute Count (NOF) 4 Decimal Equivalent 0.25″.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Flute Helix Angle (FHA) 30 Degrees Center Cutting Yes. Flute Count (NOF) 2 Cutting Direction (HAND) Right Hand. MILL MONSTER. Applicable Material | Steel ... more| Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | Single / Double End Single End.
Buy It Now
$8.99 Shipping Condition: New Location: Vernon Hills, United States YG-1 X-POWER PRO 15Deg Helix Y-Coated For Pre-Hardened Steels To HRc55. The X-POWER PRO exhibits higher hardness, heat resistance and wear resistance ... moreallowing for faster speeds, increased feed rates and superior workpiece finishes, suitable for wet or dry cutting.
Buy It Now
Free Shipping Condition: New – Open box Location: Schwenksville, United States (2) NIB Cleveland C42114 End Mills. Item #: C42114. Mill Style: Finishing End Mill. Flute Type: Spiral. Mill End Style: Ball Nose. Hand of Spiral: Right. ... moreMill Construction: General Purpose Finisher. Mill Application: General Application.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Item - Ball End Mill. End Mill Style -Ball Nose. Coolant Fed - Non-Coolant Through. Miniature End Mill -No. End Mill Application -Finishing. End Mill ... moreCutting Type -Center Cutting. Material - Machining -High Speed Steel.
Buy It Now
$15.00 Shipping Condition: New Location: Canada New OSG USA 2fl 7/16" Solid Carbide Ball Nose End Mill. Part number: 402-4375-BN Please See additional Pictures Below the Description.
Buy It Now
Free Shipping Condition: New Location: China Flute: 2 Flute. Material: tungsten steel. Type: ball end mill. Suitable for steel, cast iron, alloy steel and high toughness materials with hardness below ... moreHRC45°. Has a sh arp cutting surface that can easily cut any workpiece.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Overall Length (OAL) 2-1/2″ Flute Type Stub. HARVEY TOOL. Depth of Cut Maximum (APMX) 3/32″ End Shape Ball Nose.
Buy It Now
Free Shipping Condition: New Location: Fort Gratiot, United States TiAlN coated. TiAlN Coated. 10 Degree Taper per side ( 20 deg included). 3/4’’ Length of Cut.
Buy It Now
$4.00 Shipping Condition: New Location: Largo, United States Coating: TiAIN. NEED PARTS FOR YOUR BRIDGEPORT?. 2 FLUTE UNIVERSAL APPLICATION 1/16" BALL NOSE 30 deg HELIX END MILL LOC: 1/8". LOC: 0.125" / 1/8".
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Depth of Cut Maximum (APMX) 1/2″ Length Group Stub. Flute Count (NOF) 4 Cutting Direction (HAND) Right Hand. Flute Helix Angle (FHA) 30 Degrees Center ... moreCutting Yes.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States Our part # YG1-EH060028S.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States Brand New Lot of 5 Metal Removal Description Milling- 1/32X1/8X1/16 4FL BALL M/REMOVAL S/CAR STUB SEM. 4 Flute Centercutting Ball Single End Mills Size: ... more1/32 Shank Diameter: 1/8 Length of Cut: 1/16 Overall Length: 1-1/2 Number of Flutes: 4 Material: Solid Carbide Finish/Coating: Bright Checkout My Other Save BIG with Combined Shipping Discounts! TX Residents must pay 8.25% Sales Tax. Posted with
Buy It Now
$9.00 Shipping Condition: New Location: Bulgaria
Buy It Now
Free Shipping Condition: New Location: Rochester, United States Unequal flute spacing breaks up harmonic vibration typically created during milling, enabling cutting performance. The OSG VG441BN end mills are field ... moreproven milling tools designed with the capability of chatter free, high performance machining in a wide range of materials.
Buy It Now
$6.14 Shipping Condition: New – Open box Location: Venice, United States Kyocera SGS. Mill End Style Surface Finish Right Hand Cut. Hand of Cut Length of Cut 155 Center Ct, Venice, FL 34285. Number of Flutes.
Buy It Now
Free Shipping Condition: New Location: Lansing, United States MPN: 38496. 9/16" Endmill 4FL BN TX Z-CARB ZAP 9/16x9/16x1-1/8x6.
Buy It Now
Free Shipping Condition: New Location: Windsor, United States SANDVIK Ball Nose Endmill. Price is for ( 1 piece ) New.
Buy It Now
$5.35 Shipping Condition: New Location: Cochran, United States Flute Length:3/4". Long Length / Ball Nose. 155 - Long Length. 175 - Extra Long Length.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Type Finishing Ball Nose End Mill. Flute Type Helical. Coating AlTiN. Application General Purpose. End Style Single End. Length of Cut (in) 13/16". Length ... moreof Cut (decimal) 0.8125. Length of Cut (mm) 20.638.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: 3/8" diameter x 1" length of cut x 2-1/2" overall length High velocity milling of Aluminum and other non-ferrous materials 3 flute and 45-degree ... morehelix allow harmonic balance at high speed condition and smooth cutting Improved surface roughness-cylindrical margin which is controlled tightly Maximum metal removal rate Mirror face excellent surface finish & superior chip evacuation Package including:.
Buy It Now
Free Shipping Condition: New Location: Miami, United States
Buy It Now
$8.99 Shipping Condition: New Location: Vernon Hills, United States YG-1 X-POWER PRO 30Deg Helix Y-Coated For Pre-Hardened Steels To HRc55. The X-POWER PRO exhibits higher hardness, heat resistance and wear resistance ... moreallowing for faster speeds, increased feed rates and superior workpiece finishes, suitable for wet or dry cutting.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Ball nose, 2-flute, HRC55 with tialn coated. 1/4" 3 Flute Ball Nose End Mill. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless ... moresteel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Flute Count (NOF) 2 Cutting Direction (HAND) Right Hand. MILL MONSTER. Flute Helix Angle (FHA) 30 Degrees Center Cutting Yes.
Buy It Now
$4.00 Shipping Condition: New Location: Largo, United States BEST CARBIDE 4 FLUTE UNIVERSAL APPLICATION 1/16" BALL NOSE 30 deg HELIX END MILL LOC: 1/4" MADE IN THE USA! Universal Application 4 Flute Ball ... moreNose 30DEG Helix Carbide End Mill, Cutting Diameter: 0.0625" 1/16" Shank Diameter: 1250" 1/8" LOC: 2500" 1/4" OAL: 1 1/2" PN: 523-40625, WE CARRY ALL OF BEST CARBIDE CUTTING TOOLS. JUST ASK AND WE WILL HELP YOU FIND IT! NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS. Inc. and carry their complete line of replacement parts and accessories. Please e-mail us at toolguys02@gmail.com for all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools. Work holding. Tool holders, measuring tools and much much more. Watch our store.new inventory being added regularly! Thank You for looking! We have all items that we sell in stock and try to ship from warehouse closest to you to guarantee fasted delivery times! Questions and e-mails are answered as soon as possible. Our schedule is Monday through Friday, 8:00am till 5:00pm EST Items are shipped as soon as we receive payment. And will be shipped out same day if payment is received before 3:00pm EST. We always try to improve our customer service to ensure that you. The customer, receive best service available! Payment We accept PayPal. And All Major Credit Cards as payment for items purchased at our auction. all payments must be received within 7 business days. Please email us for further information. Shipping and Handling We will happily combine shipping on multiple item. Just let us send you updated invoice. Buyer is responsible for shipping charge. We NEVER charge for Handling. NO HIDDEN FEES! Terms and Conditions We guarantee that the items are exactly as stated in the description. Check out our Feedback… You know you can bid with confidence.
Buy It Now
$4.00 Shipping Condition: New Location: Joshua, United States
Buy It Now
$4.25 Shipping Condition: New Location: Largo, United States NEED PARTS FOR YOUR BRIDGEPORT?. Just let us send you updated invoice.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Item -Ball End Mill. Material - Machining - Cobalt. End Mill Style -Ball Nose. Miniature End Mill -No. End Mill Application -Finishing. End Mill Cutting ... moreType -Center Cutting. Single End/Double End -Double End.
Buy It Now
$4.50 Shipping Condition: New Location: Mentor, United States End Style Ball Nose. Helix Angle 30 Degree. End Type Center Cutting. Length of Cut 13/16". Product List Number 402BN. Number of Flutes 2.
Buy It Now
$4.00 Shipping Condition: New Location: Huntington Beach, United States Our part # YG1-E599929181TF.
Buy It Now
$3.59 Shipping Condition: Brand New Location: China Cutting Radius: 5/16"Cutting Diameter: 5/8"Shank Diameter: 5/8"Cutting Length: 1-11/16"Total Length: 3-1/2"Material: Tungsten Carbide (Solid Carbide)Finish: ... moreAlTiN CoatedNumber of Flutes: 2End Cut Type: Ball EndPackage Included: 1pcs x Ball Nose End MillDescriptions:Double-edged ball nose design, suitable for semi-finishing and finishing of various curved surfaces and arc grooves; Ball end mills can perform chamfer milling on steep/straight walls and contoured surfaces. Suitable for carbon steel, malleable cast iron, alloy steel, stainless steel, etc.AlTiN (aluminum titanium nitrogen) composite coating has excellent wear resistance and heat resistance, and can withstand high temperature and high-speed cutting conditions. It can directly perform high-speed roughing to finishing on materials.
|