|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Pottstown, United States Form bends in up to 0.120" wall tubing.
Buy It Now
Free Shipping Condition: New Location: China Much less labor is needed as longer handle is deployed. 1 x Main Part of Manual Tube Bender. Able to apply for wire pipe, circle-steel pipe and low-pressure ... moreliquid jointing pipe. Suitable for wire pipe ,circle-steel pipe and low-pressure liquid jointing pipe.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Model: DF-20 Material: 304Stainless Steel, Copper Color: Silver Power: 30W Voltage: 110V Air Pressure: 0.4mpa Sealing Speed: 5-20pieces/min ... moreAdjustable Temperature: 0-300℃ Process: Wire Drawing Sealing Type: Electric Heating Clamp Pattern: Vertical Type Diameter of the Suitable Soft Pipe: 8-55mm /0.31-2.16in Length of the Suitable Soft Pipe: Less Than22cm /8.66in Wideness of the Suitable Soft Pipe: Less Than 8cm/3.14in Gross Weight: 21kg/46.29lbs Net Weight: 19kg/41.88lbs Package Size: 43x32x61cm/16.92x12.59x24.01in Product Size: 35x28x55cm/13.77x11.02x21.65in Package Included 1xElectric Sealing Machine 2xHeating Pipes 1xEnglish Manual All Accessories Needed for Use.
Buy It Now
Free Shipping Condition: New Location: Mankato, United States Carbon brush is consumable parts of all types of polisher. They need to be replaced when they are exhausted. Otherwise polisher stop working. (it can ... morealso work with the pipe polisher). (b) 60 Pieces of (1 1/2" X 30") Blue or Green Color Zirconia Sanding Belt.
$14.95 Shipping Condition: Used Location: Boaz, United States The bender is in good working condition. Shipping international will be additional cost.
Buy It Now
Free Shipping Condition: New Location: Albany, United States Oetiker Type Stepless Stainless Steel Ear Clamp - (17.5mm) 1/2in Pack of 50
Buy It Now
Free Shipping Condition: New Location: Solon, United States INSTRUCTIONS: Open the movable wing and place the pipe caliper around the pipe between both wings. Simply close the wings so the pipe is touching both ... morewings and the top of the caliper.
Buy It Now
Free Shipping Condition: New Location: Longview, United States 90 22 10 BK Knipex BiX®, Pipe and Tube Cutter. Clever pipe cutter: Cuts pipes without shavings and fits comfortably in the hand. Rotatable knife block ... morefor cutting plastic pipes (blade in the middle) and sealing sleeves (blade outside).
Buy It Now
Free Shipping Condition: Used Location: Lawrence, United States
Buy It Now
Free Shipping Condition: New Location: Vancouver, United States Material: Polyolefin. Fast, safe, secure way to wrap wiring harnesses.
Buy It Now
Free Shipping Condition: New Location: Sioux Falls, United States Attach any standard propane tank to threaded end. The stainless steel burn tube burns at 3595 degrees Fahrenheit and is wind resistant while ABS plastic ... morehandle fits hands with intuitive igniter and valve location.
Buy It Now
Free Shipping Condition: New Location: Stoughton, United States The Concrete Form Tubes are made of lightweight material designed for pouring footings, round columns and piers. Number of 60# Concrete Bags to Fill 11.2.
Buy It Now
Free Shipping Condition: New Location: Las Vegas, United States Model RIDG 31340. Ridgid 31340 Specifications Ridgid 31340 Features • Strong, woven nylon strap gives tight grip. • Pipe Capacity: 2". • Best for any ... morepolished pipe. • Two models available for plastic pipe.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Hot & Cold Strip Cutter Automatic 100mm Webbing Textile Ribbon Cutter 280W 110V. Power: 280W. This automatic tape cutting machine with the steel shell ... moreand steel blade is more durable and has a long service life.
Buy It Now
Free Shipping Condition: New Location: Cedar Bluff, United States Knipex TubiX® Pipe Cutter 7-1/4" or 180mm. KNIPEX TubiX ® pipe cutter. Part # 90 31 02. Part Number: 90 31 02. Use just one hand to push the cutting wheel ... moreup to easily cut pipes. High-quality needle bearings enable the cutting wheel and four guide rollers to operate with ease.
Buy It Now
Free Shipping Condition: New Location: Mankato, United States Carbon brush is consumable parts of all types of polisher. They need to be replaced when they are exhausted. Otherwise polisher stop working. (it can ... morealso work with the pipe polisher). (b) 30 Pieces of (1 1/2" X 30") Coarse Grit Blue or Green Color Zirconia Sanding Belt.
Buy It Now
Free Shipping Condition: New Location: Tarpon Springs, United States Brand new flange wizard miter maker with case. Questions call 1-800-849-4821 Posted with
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Pipe Press Copper Crimp Tool. Suitable for copper fittings and copper joints, clamping copper sleeve, aluminum sleeve. Tube Pipe Bender HVAC Refrigeration ... moreRatchet Bending Heads Supports Tool Kit Set.
Buy It Now
Free Shipping Condition: Used Location: Wolcottville, United States 16-1/2" OAL threaded part. 28" including rod length .
Buy It Now
$9.99 Shipping Condition: New Location: Los Angeles, United States Copper Tubing Press Tool, Copper Crimping Tool for 1/2", 3/4", 1" Viega ProPress Copper Fittings. Good for Viega ProPress, Elkhart, Conex copper fittings. ... moreForging craft promises jaws to give pipe fittings an accurate press without scratches.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Pipe Press Copper Crimp Tool. Suitable for copper fittings and copper joints, clamping copper sleeve, aluminum sleeve. For copper range: 1/2", 3/4", 1" ... more( 12.7 mm, 19.05 mm, 25.4 mm ). PRODUCT DISPLAY.
Buy It Now
Free Shipping Condition: New Location: 金东区, China It efficiently removes pipe burrs both inside and out, making your job easier and more effective. It ensures compatibility with different pipe sizes, ... moreproviding flexibility in your plumbing projects.
Buy It Now
Free Shipping Condition: New Location: United States Due to the difference between different monitors, the image may not reflect the actual color of the item. Color: Transparent.
Buy It Now
$5.00 Shipping Condition: New Location: United States Add our Store to your Favorites and receive our email newsletters about new items and special promotions! General Interest, Please note that pictures ... moreshown above may or may not differ from actual product images(for reference only) SKU: 331885, Mfg# 33100, Manufacturer: Ridgid Tool, Please note: We may have a lot more quantity available. If you need more of this item than we have listed here. Please call us at 866-948-6215 or. start_elivehelp_btncode end_elivehelp_btncode Wheel cutter. Heavy-duty wheels for No. 1A(model No. 32810) and 2A(model No. 32820) pipe cutter. Will also fit No. 2 Superior pipe cutter. PAYMENT PayPal is our only method of payment. Your PayPal account must be a Verified US PayPal account. Selecting"Immediate Pay" is the way to go. If you select eCheck. It may take 2-8 days to clear PayPal. Please note: Inventory is not reserved until the item is paid for. For shipments in New York. We are required to collect the appropriate sales tax. SHIPPING ALL purchases are shipped within 3-4 business days; most are shipped within 1-2 business days. BIC Warehouse's eBay store ships to the 48 Contiguous United States including Military APO& FPO and Puerto Rico. At this time. We do not ship to other International locations. Combined shipping is available by placing all BIC Warehouse eBay orders BEFORE making the Payment. eBay's new checkout offers you to consolidate your orders to get better shipping rates. Shipment errors due to a bad address entered by the buyer and will not be credited for shipping charges if returned or at all if lost or abandoned by the carrier. We supply tracking information directly to your eBay account within 24 hours after the shipment leaves our warehouse. Please make sure that our email messages don't go into spam or junk. RETURNS Please for our FULL RETURN POLICY. For the first 14 days from date of receipt of your purchase you may return the merchandise for a full money back refund. Excluding any shipping charges. Returned or exchanged products must be
Buy It Now
Free Shipping Condition: New Location: United States Due to the difference between different monitors, the image may not reflect the actual color of the item.
Buy It Now
Free Shipping Condition: New Location: United States The kit includes a 2 ft. display tube and an anti-tear hang card. The display tube and hang card provide information using useful graphics and QR code ... morelinks to demonstration videos. Battered Blade Gunite Fresno has sloped (or battered) ends to prevent scoring of applied material.
Buy It Now
$10.16 Shipping Condition: New Location: Wayland, United States 9 Reasons To Buy From Us, 1. Low Prices. All year round, 2. Professional sales personnel, 3. Brand new merchandise, 4. Next business day shipping, 5. ... moreQuality name brand products, 6. All items in stock& ready to ship, 7. Competitive pricing, 8. Prompt service and repair, 9. Confirmation tracking information, Toolup Price: $45.73 + Always Free Shipping. + Full Factory Warranty. + 30 Day Return Policy. Make: Ridgid Part Number: 31345 Details: Ridgid 31345 Specifications: Handle Length: 11-3/4" Strap Length: 30" Strap Width: 1-1/8" Pipe Capacity: 2" Tube Capacity: 5-1/2" Ridgid 31345 Features: Best for any polished pipe. Strong. Woven nylon strap gives tight grip. Two models available for plastic pipe. Polyurethane-coated strap. Replaceable straps available. Notice: All power plugs are 120V US power. PayPal preferred. But we do accept Credit/Debit Cards. Your winning bid or"Buy It Now" purchase is a legally binding contract that requires the bidder to follow through with payment for the auction. Payments are expected within 3 days. If you plan on purchasing more items from us and want to wait for combined shipping. Simply drop us an email just to let us know. For combined checkout. Including eBay store purchases, wait until all auctions have ended, then notify us to issue a single invoice for all items. All orders ship within 24- 48 hours of payment clearing. Monday- Friday with exception to National Holidays. All Shipments are processed and shipped from Las Vegas. Nevada. We cannot Ship to PO Boxes or APO Addresses. Orders shipped to APO or PO Box addresses will be cancelled. Shipping to the 48 contiguous US states only. No international shipping. We do not ship to Alaska. Hawaii or Puerto Rico. We do not ship outside of the 48 contiguous US states. We accept returns up to 30 days after you receive your order. Your order must be in good condition. And be in the original packaging. Restocking fee may apply. When you receive your shipment. Please note with the delivery driver any
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Pipe Press Copper Crimp Tool. Suitable for copper fittings and copper joints, clamping copper sleeve, aluminum sleeve. For copper range: 1/2", 3/4", 1" ... more( 12.7 mm, 19.05 mm, 25.4 mm ). Tube Pipe Bender HVAC Refrigeration Ratchet Hydraulic Deburring Tool Kit.
Buy It Now
Free Shipping Condition: Used Location: Walled Lake, United States Description: You are buying a Used Rothenberger Tool Set, Tee Extractor, rachet, D-6233 S2. Condition: This item is used and was taken from a working ... moreenvironment. It is guaranteed to be in working condition. Shipping: Free standard ground shipping to lower 48 states. Most items will be shipped via UPS Ground. Certain rural locations along with Alaska and Hawaii may be shipped free via United States Postal Service. Alaska and Hawaii may require an additional shipping charge. International orders are not shipped free and require shipping via United States Postal Service or Fedex International.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Shell Material: Steel Blade Material: Steel Type: Hot and Cold Cutter Power: 280W Voltage: 110V/60Hz Blade Width: 11cm/4.33inch Effective ... moreCutting Width: Within 10cm/3.9inch Cutting Length: 1-99999mm/0.04-3937inch Cutting Speed: 60-120 pcs/min Blade Maximum Temperature: 350°C Package Size: 55*42*39cm/21.65*16.5*15.4inch Gross Weight: 22.5kg/49.6lbs Net Weight: 20kg/44lbs What's Included? 1 X Automatic Tape Cutting Machine 1 X Power Cord 1 X Chinese-English Manual Other Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Shell Material: Steel Blade Material: Steel Type: Hot and Cold Cutter Power: 280W Voltage: 110V/60Hz Blade Width: 11cm/4.33inch Effective ... moreCutting Width: Within 10cm/3.9inch Cutting Length: 1-99999mm/0.04-3937inch Cutting Speed: 60-120 pcs/min Blade Maximum Temperature: 350°C Package Size: 55*42*39cm/21.65*16.5*15.4inch Gross Weight: 22.5kg/49.6lbs Net Weight: 20kg/44lbs What's Included? 1 X Automatic Tape Cutting Machine 1 X Power Cord 1 X Chinese-English Manual Other Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Hot & Cold Strip Cutter Automatic 100mm Webbing Textile Ribbon Cutter 280W 110V. Power: 280W. This automatic tape cutting machine with the steel shell ... moreand steel blade is more durable and has a long service life.
Buy It Now
$11.60 Shipping Condition: New – Open box Location: Kawkawlin, United States These services include Item is sold as pictured.
Buy It Now
Free Shipping Condition: New Location: United States Direct Burial Copper Ground Pipe provides a solid foundation for electrical grounding systems. Its superior conductivity ensures efficient dissipation ... moreof electrical currents, minimizing the risk of electrical faults and enhancing overall safety.
Buy It Now
Free Shipping Condition: New Location: Davis, United States New Rothenberger plier (pipe wrench) No. 070122X. Super S 1" No. 070122X. The corner pipe wrench 45° "SUPER S" can be used for clamping and rotating pipes ... morewith 1/2"-3".
Buy It Now
Free Shipping Condition: Used Location: Wolcottville, United States overall tool length is 8-1/2" with rod OAL is 21" .
Buy It Now
Free Shipping Condition: New Location: Denver, United States Size Spring Hose Clamp - 80pcs. QUANTITY - 80PCS. ISPINNER 80pcs Spring Band Type Fuel/Silicone Vacuum Hose Pipe Clamp, 7mm-18mm Low Pressure Air Clip ... moreClamp (7mm 9mm 10mm 11mm 14mm 16mm 17mm 18mm). QUANTITY 2pcs 80pcs 2-4pcs 140pcs 100pcs 50pcs.
5d 0h 18m 57s 0 bids
$45.00 Now
$8.60 Shipping Condition: New Location: Jeffersonville, United States This RIDGID #2 strap wrench, model number 31340, is a versatile tool that can handle a maximum capacity of 3 1/2" OD or 90mm. The adjustable wrench is ... moreperfect for those who need to grip and turn pipes, tubing, and fittings without scratching, denting, or crushing them.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： Color:Orange Material: Plastic + Metal Voltage: 12v Battery: Lithium Ion Batteries Battery Capacity: 4500 Mah Battery Charging Time: 1.5 ... moreHours Full Filling Tying Wire Diameter: 0.8mm Tying Wire Length: More than 110 M Applicable Scope of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number per Charge: 1500 Times Knot the Required Time: 0.8 Seconds at a Time Machine Size: 275 Mm * 65 Mm * 240 Mm / 10.83''X2.56''X9.45''(Appr.) Tool Box Size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Handheld Automatic Rebar Tying Machine Rebar Tyer Package Tier Tool 8-34mm Specifications： Color: Orange Material: Plastic + Metal Voltage: 12v Battery: ... moreLithium Ion Batteries Battery Capacity: 4500 Mah Battery Charging Time: 1.5 Hours Full Filling Tying Wire Diameter: 0.8mm Tying Wire Length: More than 110 M Applicable Scope of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number per Charge: 1500 Times Knot the Required Time: 0.8 Seconds at a Time Machine Size: 275 Mm * 65 Mm * 240 Mm / 10.83''X2.56''X9.45''(Appr.) Tool Box Size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch).
$19.95 Shipping Condition: Used Location: Arlington, United States Sorry, no case or owner's manual. There are no personal markings on the tool.
Buy It Now
$19.99 Shipping Condition: Used Location: Plainville, United States
Buy It Now
$13.60 Shipping Condition: New Location: Trenton, United States 5 PIECES - DOUBLE TUBE SOCKETS WITH BAR AND HOLDER. 4 - 1 1/32 - 1 3/32.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： Color:Orange Material: Plastic + Metal Voltage: 12v Battery: Lithium Ion Batteries Battery Capacity: 4500 Mah Battery Charging Time: 1.5 ... moreHours Full Filling Tying Wire Diameter: 0.8mm Tying Wire Length: More than 110 M Applicable Scope of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number per Charge: 1500 Times Knot the Required Time: 0.8 Seconds at a Time Machine Size: 275 Mm * 65 Mm * 240 Mm / 10.83''X2.56''X9.45''(Appr.) Tool Box Size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch).
Buy It Now
$0.25 Shipping Condition: New Location: China
Buy It Now
$76.95 Shipping Condition: Used Location: Glassboro, United States Model: 6230. Small orders are no problem. Joseph Fazzio Inc.
Buy It Now
$20.05 Shipping Condition: Used Location: Glassboro, United States Model: 407. Small orders are no problem. Joseph Fazzio Inc.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Easy interchangeable jaws Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings. Secure crimping in seconds; Automatic locking of pressing ... moretongs. Rotating 360 degree head; Extendable handles for improved leverage.
Buy It Now
$20.05 Shipping Condition: Used Location: Glassboro, United States Small orders are no problem. Your Best Work Starts Here™. Be sure to add us to yourfavorites list !
Buy It Now
Free Shipping Condition: New Location: United States Due to the difference between different monitors, the image may not reflect the actual color of the item.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Pipe Press Copper Crimp Tool. Suitable for copper fittings and copper joints, clamping copper sleeve, aluminum sleeve. HVAC Air Conditioning Refrigeration ... moreRatchet Pipe Bender Cutter Tool Kit. Rotating head: 360 degree.
Buy It Now
$11.60 Shipping Condition: New – Open box Location: Kawkawlin, United States These services include Item is sold as pictured. NO VERBAL CONFIRMATION WILL BE GIVEN, THIS MUST BE IN WRITING.
Buy It Now
Free Shipping Condition: New Location: Norcross, United States To 5/8 in. Efficient Compact Design: Specifically built for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
Buy It Now
Free Shipping Condition: New Location: Melrose, United States 4 to 28mm O.D. Tubing (1/4 to 1?. Also Available: 70058-AM 1 - Eccentric Flaring Tool (70057-A). 1 - Heavy Duty Tube Cutter for 1/8 - 1 1/8" O.D. Tubing ... more(70033). Flares 6 sizes: 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4" O.D. tubing. ).
Buy It Now
$6.00 Shipping Condition: New Location: Kawkawlin, United States These services include Item is sold as pictured.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Hot & Cold Strip Cutter Automatic 100mm Webbing Textile Ribbon Cutter 280W 110V. This automatic tape cutting machine with the steel shell and steel blade ... moreis more durable and has a long service life. Type: Hot and Cold Cutter.
Buy It Now
Free Shipping Condition: New Location: Las Vegas, United States Model RIDG 31345. Ridgid 31345 Specifications Ridgid 31345 Features • Strap Length: 30". • Strap Width: 1-1/8". • Pipe Capacity: 2". • Tube Capacity: ... more5-1/2". • Strong, woven nylon strap gives tight grip.
Buy It Now
$20.61 Shipping Condition: Used Location: Shelburne Falls, United States USED - clean. All parts are in our possession in Shelburne Falls, MA, USA.
Buy It Now
Free Shipping Condition: New Location: Mankato, United States Carbon brush is consumable parts of all types of polisher. They need to be replaced when they are exhausted. Otherwise polisher stop working. Coarse and ... morefiner grit included. (b) 60 Pieces of (1 1/2" X 30") Blue or Green Color Zirconia Sanding Belt.
Buy It Now
Free Shipping Condition: New Location: W. K. Road S.O, India Brass Bourdon tube Pressure gauge (100 mm Dial, 3/8 " BSP thread). Free 'O' Rings + Flat High pressure resist Aluminum washers.
|
|
|
|
VINTAGE CAPACITY MODEL No 3002 HEAVY DUTY PIPE CUTTER 1/8" to 2" TUBING CAPACITY
Up for bids is a CAPACITY Pipe Cutter No. 3002 CUTS 1/8" TO 2" The item is used but in very good condition it's weight is 8 lbs L17'xW 5' It has Minor blemishes and black paint on it this Tool operates smoothly and cuts well. See my pictures TELL A MILLION WORDS. WILL ONLY SHIP IN THE USA. 670.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%3E670%3E-13d637ccbf3-0xf2-
|
|
|
Ridgid No. 2A Manual Heavy Duty 2-A Pipe Tube Tubing Cutter 1/8 - 2"
You are bidding on a Used Ridgid No. 2A Heavy Duty Pipe Cutter. 1/8"2" Pipe Capacity. Cleaned and oiled and in good working condition. Weighs 7 lbs. Free shipping to 48 states. For all other destinations. Please contact for a quote. Please email any questions, prior to bidding. Thanks for looking!
|
|
|
Superior No. 3 Tubing Pipe Cutter 5/8" - 2 1/8" and 1" Pipe
Up for sale is a Superior No. 3 Tubing Pipe Cutter 5/8" 2 1/8" and 1" Pipe. Payment If you are the lucky WINNER of this Auction. Please make payment in full via paypal within 72 hrs of winning the item to insure the Quickest Shipping possible. Once we receive payment your item will be shipped via USPS within 2 business days(excluding Sat. Sun. and holidays) If payment Clears before 6 P.M your item will be processed and Marked for shipment within 24 hours. Shipping A Tracking number and insurance is provided with every purchase when it is mailed out. It will be uploaded into eBay and Paypal. You will be able to see that I mailed it out within 2 business days from receiving payment and then be able to track your items progress through the postal system. Returns- Please note that I only give refunds when the item is significantly ... morenot as described. Please contact me within 14 days if this is the case. I do make mistakes occasionally like everyone else and I do want you to be a satisfied customer. I do not give refunds for the buyers failure to read my listing information. ~~~ Policies of Sale ~~~ I sell Vintage& Used item's. On occasions New item's, But I do state that in my listings! Most of the item's I sell come from places outside my home, There for I can Not Guarantee that No Form of Odor Exist!JUST IN CASE THERE IS ONE. Vintage and Used it just that. Some ware is to be expected! Use any and All Photo's and Your OWN Judgement When making a PURCHASE from Me. AS ALL SALES ARE FINAL& Sold AS IS! I only give refunds when the item is significantly not as described. If You Have 0-3/bad Feedback. PLEASE’ email me before bidding/buying. I reserve the right to cancel bids from any questionable bidders. I am happy to leave feedback once you have received your item and once I have received your feedback. Happy Bidding. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Superior Pipe And Tubing Cutter Model #3, Up to 2-1/8" Tube and 1" Pipe
You are looking at a Used Superior Pipe And Tubing Cutter Model#3. Known for their durability and ease of use can count on. Cuts both Metal and Plastic quickly allowing you to get that job done fast. Detailed Information below: The item is used with minor wear Made by Superior Item is a Pipe And Tubing Cutter Model#3 cuts up to 2-1/8" tubing Cuts up to 1" Pipe Great for home or commercial use Great to collect Great for cutting golf club shafts The item functions as intended. Please go over the information we have provided on this item. And review the images for a detailed look at what you are buying. If you have any questions regarding this item or would like more information, please contact us. Purchase with confidence in our items. The Tool Box Co stands behind our customers. Please do not hesitate to contact us, visit our store ... morepage: http:stores.ebay.com/The-Tool-Box-Co for more information. We put customer service above all else and will do our best to make you a completely satisfied and returning customer. Store Policies Condition: We take pride in the quality of the items we sell. All of our items are tested and described to the best of our ability. All of our items are sold as is with no warranties expressed or implied. Please see item description for clarification. Be sure to read our listings thoroughly to make sure you understand what you are buying. Payment: Please send your payment within 7 days of the listings end time. This allows us to make sure we can get your purchase to you faster. And this makes the process run smoother for both parties. We accept payment via PayPal only please. We do not ship outside of the United States, please no international orders, sorry. Shipping and Handling: All of our items are shipped quickly and securely to make sure they arrive to you in the same way they are shipped. We will provide delivery confirmation on all of our items. This helps us, and helps you by seeing when the item arrives and lets you see when to expect it. Items purchased Monday through Fri
|
|
|
Ridgid Pipe And Tubing Cutter Model #20, Up to 2-1/8" Tube and Pipe
You are looking at a Used Ridgid Pipe And Tubing Cutter Model#20. Up to 2-1/8" Tube and Pipe. Known for their durability and ease of use can count on. Cuts both Metal and Plastic quickly allowing you to get that job done fast. Detailed Information below: The item is used with minor signs of wear Made by Ridgid Item is a Pipe And Tubing Cutter Model#20 cuts up to 2-1/8" tubing and pipe Great for home or commercial use Great to collect Great for cutting golf club shafts The item functions as intended. Please go over the information we have provided on this item. And review the images for a detailed look at what you are buying. If you have any questions regarding this item or would like more information, please contact us. Purchase with confidence in our items. The Tool Box Co stands behind our customers. Please do not hesitate to ... morecontact us, visit our store page: http:stores.ebay.com/The-Tool-Box-Co for more information. We put customer service above all else and will do our best to make you a completely satisfied and returning customer. Store Policies Condition: We take pride in the quality of the items we sell. All of our items are tested and described to the best of our ability. All of our items are sold as is with no warranties expressed or implied. Please see item description for clarification. Be sure to read our listings thoroughly to make sure you understand what you are buying. Payment: Please send your payment within 7 days of the listings end time. This allows us to make sure we can get your purchase to you faster. And this makes the process run smoother for both parties. We accept payment via PayPal only please. We do not ship outside of the United States, please no international orders, sorry. Shipping and Handling: All of our items are shipped quickly and securely to make sure they arrive to you in the same way they are shipped. We will provide delivery confirmation on all of our items. This helps us, and helps you by seeing when the item arrives and lets you see when to expect it. Items pur
|
|
|
Ridgid No. 152 Pipe PVC Conduit Tube Tubing Cutter 1/4 to 2-5/8 Cutting Tool
Ridgid No. 152 Pipe PVC Conduit Tube Tubing Cutter 1/4 to 2-5/8 Cutting Tool Ridgid No. 152 Pipe PVC Conduit Tube Tubing Cutter 1/4 to 2-5/8 Cutting Tool. Excellent condition. Please email with questions. We accept paypal and request that payment be made within 3 days of auction end. We will combine shipping whenever possible. We use USPS Priority Mail and Parcel Post for larger items. inkfrog terapeak.
|
|
|
RIDGID NO 20 TUBING PIPE CUTTER 5/8-2-1/8
This item is in great condition. Fit for anyone with a DIY project to do. Thank you for your time. Posted with
|
|
|
RIDGID 152 1/4" to 2-5/8" Quick Release Pipe / Tubing Cutter
Ridgid 152 1/4"2-5/8" Quick Acting Pipe Tube Tubing Cutter Please Note: Item is used with cosmetic blemishes including scratches and nicks but is in good working condition. May require a new blade. Please view pictures for more details. Domestic shipping only!
|
|
|
Ridgid No 205 Pipe and Tubing Cutter 1/4" to 2-3/8"
Used Good Working Condition Ridgid Model 205 Pipe Cutter 1/4" to 2-3/8" Outer Diameter Nice used Ridgid Pipe cutter for sale here.
|
|
|
Reed TC3QA 3/8" to 3-1/2" Quick Release Plastic Tubing Pipe Cutter
Tubing cutter in good used condition. Free priority mail. Paypal only.
|
|
|
RIDGID 2A Heavy Duty 1/8"- 2'' Pipe Tube Tubing Cutter Rigid No 1-2
Ridgid pipe cutting tool. The cutting wheel may need to be sharpened. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Reed TC2Q TC2QA Quick Release Pipe Tubing Cutter 1/4" to 2-5/8" Capacity Used
You are bidding on a Used Reed TC2QA Quick Release Pipe Tubing Cutter 1/4" to 2-5/8" Capacity. The tubing cutter shows some wear but is fully functional and in good usable condition. This item will come a pictured. Shipping to the lower 48 states will be free.
|
|
|
Ridgid No. O Tubing Cutter Cuts 5/8" to 2-1/8" Tubing/Pipe etc.
I have a vintage No.0 Ridgid Tubing Cutter. It will cut 5/8" to 2-1/8" pipe. Tubing, etc. The blade has a small knick in it and is easily replaced. It moves free up and down and should give you years of use. I am offering free shipping to the USA!
|
|
|
RIDGID PIPE CUTTER MODEL 2A 1/8" 2 1/2" TUBING CUTTERS NO RESERVE
RIDGID PIPE CUTTER MODEL 2A 1/8" 2 1/2" TUBING CUTTERS NO RESERVE Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 RIDGID PIPE CUTTER Model: 2A Ridgid Pipe Cutter- 1/8 to 2-1/2" This item appears to be in good used condition. Refer to pictures for details. New, this item would cost over $160.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or ... morecategory we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority!
|
|
|
Rigid No.2 Heavy Duty 1/8"-2" steel pipe * tubing cutter. Cutting wheel
RIDGID NO 2 Heavy Duty 1/8" 2' Pipe& tube Cutter. Original Rigid No 1-2 Used. But in fine condition. Goes for $135 on Amazon! Buyer pays actual shipping;insurance& signature required. My items are always described accurately and shipped quickly and securely as reflected by my perfect feedback of nearly 600 auctions over 10 years! Bid early and bid often ☺.
|
|
|
*****NYE TOOL NO.2 SAUNDERS PIPE CUTTER/TUBING.
FOR AUCTION IS A NYE TOOL NO.2 SAUNDERS PIPE CUTTER. THIS ITEM IS IN GOOD USED CONDITION. ALL PARTS OF THE TOOL WORK AS THEY SHOULD. Check out my! My house is non-smoking and I am very accommodating. Write with questions before you bid. All my items come from either garage sales. Thrift stores, storage units, etc. Items previously used but in good condition except where noted. I am not an expert on anything but I do my best to describe each item accurately. All items are sold“as is” I package each item to the best of my ability so it can maintain its integrity thru out the mail system. Local pick up is okay let me know in advance. Items are shipped within one or two days after payment. Thanks for looking. Please check out my other items. I do NOT mail international! Payment is expected within three days unless other arrangements have been ... moremade between us. Feedback is left for you once you leave it for me. This way I know you received your item and are pleased with your purchase! If there is a problem please email me before leaving negative feedback so that I can do everything I can to correct the problem. Thanks! And happy bidding! NO INTERNATIONAL SHIPPING!
|
|
|
# 132 Rigid Tubing/Pipe Cutter 1/4 To 2 5/8 OD
A#132 Rigid tubing/ pipe cutting tool. Excellent condition. No cutting wheel. S& H is $12.35 priority mail. Payment is due within three days of closing. On overseas shipping. Thanks for looking.
|
|
|
Rigid Pipe Tubing Cutter No 2 Heavy Duty 1/8" - 2" Part #? Smooth Turning Handle
This is a sale for a Rigid Pipe Tubing Cutter No 2 Heavy Duty 1/8" 2" Part# Smooth Turning Handle.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13ea47e0153-0xf6-
|
|
|
Ridgid No. 4-S Heavy Duty 2" To 4" plumbing Pipe tubing Cutter
NICE RIDGID 4-S. EVERYTHING WORKS SMOOTHLY, NEW CUTTER WHEEL 012-011-01-10/709 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED ... moreTO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF
|
|
|
RIDGID 2-A PIPE AND TUBING CUTTER 1/8" - 2" CAPACITY
NICE RIDGID 2A. EVERYTHING WORKS SMOOTHLY 012-011-01-10/709 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK ... morePROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All it
|
|
|
one Ridgid 44-S 2 1/2" - 4" 4 wheel pipe tubing cutter
you are bidding for one one ridgid 44-s with good sharp cutter wheels. If the listing says 3 available. You get the one in photo 1. if the listing says 2 available, you get the one in photo 2. if the listing says 1 available, you get the one in photo 3. You are bidding for one. PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. ... moreRETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software inclu
|
|
|
Superior Tool ST-2000 Pipe and Tubing Cutter 5/8" To 2-1/8"
USED- LIKE NEW CONDITION- SUPERIOR TOOL#ST-2000 PRO-LINE PIPE(3/8" 1" AND TUBING(5/8" 2-1/8" CUTTER* 9" OAL(RETRACTED) X 4" WIDE ASIN: B0000DINDC Used Sparingly PIPE CUTTER IN FINE CONDITION!
|
|
|
Quick Relase TUBING / PIPE CUTTER 1/4"to 2-3/8" Reed Mfg TC2Q
Very good condition. Quick release tubing& pipe cutter, 1/4" to 2-3/8" O.D. QUICK ADJUSTMENT. Press the thumb release Button and the Spring Loaded Cutting Wheel will spring to its most open position insert the tubing. Then just slide the wheel Handle right up to the pipe. Professional Quality. All Metal Design Hardened Alloy Steel Rollers. 4 Roller Tracking System prevents Tube from Threading. De-burring Tool Stores in Frame. Ideal for Galvanized. Brass, Copper, Aluminum and Steel. Cutting Capacity is 1/4' to 2-3/8" O.D. I offer a 14 day NO questions asked return policy Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ebb24cf1a-0x107-
|
|
|
Superior Cleveland No. 3 Tubing Pipe Cutter 5/8" - 2 1/8" Tube & 3/8" - 1" Pipe
Superior No 3 Piper cutter Does not come with a cutting wheel Blade Dirty
|
|
|
Reed Quick Release Tubing / Pipe cutter 1/4" - 2 3/8" (6-67 mm) TC2QA
Reed Quick Release Tubing/ Pipe cutter 1/4" 2 3/8" 6-67 mm) Reed TC2QA Used- Needs cleaning- Everything works& moveable. Happy to Answer any Questions. Just e-mail me. Usually ship within 24 hours of receiving verified payment.
|
|
|
Ridgid 202 Wide Roll Pipe/ Tubing Cutter 32895 1/8" to 2" Free USA Shipping!
I have a very nice shape Ridgid 202 Wide Roll Pipe Tubing Cutter. This cuts 1/8" to 2" pipe or tubing. I have cleaned. Inspected, and painted this tool. The cutting wheel is in great shape as well. I am offering free shipping to the USA!
|
|
|
Ridgid Model 20 Plumbing Pipe Tubing Cutter 5/8 - 2-1/8
Ridgid pipe cutter. in good shape! Please understand that you are bidding on vintage merchandise and this product is not new. Every effort will be made to deliver your product to you in good condition. However, things can happen while shipping, therefore we cannot replace the product or offer a refund. We certify that all products leave us as promised and as illustrated in the ebay advertisement. Please make sure you understand what you are bidding on and the terms associated with winning this bid. Shipping and handling fees are not refundable.If any items are not already insured, you may elect to insure your item for an addtional charge and we will help you with any insurance claims if the auction item is broken during shipment but we cannot offer a refund. Some shipping cost can be higher than actual cost, I do not issue any refunds. Many ... moretimes my shipping is more than what you paid. Please pay within 5 days of winning bid. Need more information please contact us. We can combine shipping orders upon request any all shipping can be negotiated for buyers best choice. Some handling charges may apply to any item. International shipping is welcome. Please be advised shipping is expensive. It may also take up to six weeks for delivery also.
|
|
|
Lot 3 Pipe Tubing Cutters- New Britian Plus 2 compact models & Cleaning Brush
This listing is for a lot of 4 plumbers items including a new britian model T-132 pipe cutter made in USA.Two compact pipe cutters for tight spaces 1/8 to 5/8 pipe tubing cutters one from general tool co. made in usa all in good used condition and a new copper pipe wire cleaning brush. I purchased a storage unit that had lots of tools from a person who worked or managed or owned a construction company which included multifloor parking ramps and tall office buildings as there were blueprints for some of these projects in the unit. There are many tools and safety gear some are unused,some new in package,some vintage and some used including many hard to find items.I will combine shipping if possible for more than one auction.Please email me for cost of combined shipping costs. Payment is due within 7 days of auction. I accept PayPal.Email for ... moreother possible payment methods.I have a 14-day return policy but postage and insurance is not refundable and must be returned in same condition as shipped.
|
|
|
Ridgid 3/4" - 2" pipe cutter 42A 4 wheel tubing cutter
Lightly used Large 4 wheel pipe and tubing cutter. 3/4" to 2" diameter The 4 cutters are in good condition. No chips or breaks. Operates smoothly. Any questions please ask before bidding. Check out my! Shipping to the lower 48 states only. Thanks for looking!
|
|
|
RIDGID MODEL #2A PIPE TUBING CUTTER UP 1/8 TO 2 inch MINT CONDITION 31
RIDGID MODEL#2A PIPE TUBING CUTTER UP 1/8 TO 2 inch MINT CONDITION 31 RIDGID MODEL#2A PIPE TUBING CUTTER UP 1/8 TO 2 inch MINT CONDITION. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ... moreISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
REED QUICK-ACT TUBING/PIPE CUTTER 1/4" TO 2-3/8"
This is a good REED QUICK-ACT TUBING/PIPE CUTTER 1/4" TO 2-3/8" Paint wear but in very good condition. There is a $3 handling fee that is automatically included in shipping. All of our items are found in storage units that we buy at auctions. And we know little about them, therefore all items are sold as is. We accept only PayPal. Thank you.
|
|
|
Ridgid tubing pipe cutter 132 quick acting to 2 5/8"
lightly used Ridgid No.132 fast acting tubing pipe cutter. With box. in great shape. From 1/4" to 2 5/8"
|
|
|
K Vintage craftsman pipe cutter tubing 1/4 to 1 1/2" Good condition
Very good condition. ALL OF MY ITEMS COME WITH A SATISFACTION GUARANTEE. NEGATIVE AND NEUTRAL FEEDBACK CAN BE AVOIDED. SIMPLY COMMUNICATE WITH ME IF YOU FEEL YOUR PURCHASE WAS NOT AS STATED. Check out my ebay store Bottom Buck Bargains! Different items added all the time!
|
|
|
ANTIQUE NO. 2 PIPE/TUBING CUTTER GREAT CONDITION! INV=5105
CLICK ON THE THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a ANTIQUE NO. 2 PIPE/TUBING CUTTER GREAT CONDITION! No foreign bidders. No exceptions. NO CANADIANS. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Ever. This listing was posted using command line interface provided by. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I do collect sales tax on in-state purchases.
|
|
|
RIDGID No. 2A - 1/8" TO 2" INCH HEAVY DUTY PIPE CUTTER / TUBING CUTTER
This auction is for the RIDGID. Model No. 2A, Pipe Cutter pictured. 1/8" to 2" diameter capacity. Cutting wheel is in good condition and all moving parts work as intended. Pay Pal Only. Shipping to the Lower 48 Continental United States only. Payment requested within 48 hours of auction end. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f13f05780-0x103-
|
|
|
RIDGID Tubing & Copper Pipe Cutters. 2-#20 & 4-#10. W/SS cutting wheels
You get 6 Ridgid tubing cutters for stainles tubing. Copper tubing& copper pipe. You get 2-20 that cut 5/8"2-1/8" O.D. You get 4- 10 that cut 1/8"1" O.D. The 2# 20 cutter were only used for a couple of months, 3 of the#10 cutters used about the same. The older cutter on the far right is older and needs a pin for the wheel. The 5 newer cutter work excellent! You also get 7 Brand New Ridgid Stainless Steel cutting wheels. These wheels are very expensive to buy retail. A very nice Ridgid Cutting tool lot! Make an Offer* Thanks alot for looking.
|
|
|
Ridgid Model 202 1/8"-2" Wide Roll Pipe Cutter,Heavy Duty,Tubing
Ridgid Model 202 1/8"2" Wide Roll Pipe Cutter. Good condition. Some scuffs and scratches. Painted for ID purposes. Cutting wheel is a little dinged up. A ll seems to be working well. If you have any questions feel free to ask. Please check out our other auctions. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. ... moreSquareTrade © squaretrade warranty v2.0
|
|
|
Rigid No 40 Pipe Tubing Cutter 2" To 4" Capacity
Rigid Number 40 pipe tubing cutter 2" to 4" capacity in good working condition. Free standard shipping to lower 48 States.
|
|
|
**************RIDGID NO.20 TUBING/PIPE CUTTER. 5/8" TO 2 1/8" OD***************
FOR AUCTION IS A RIDGID NO.20 TUBING CUTTER. 5/8" TO 2 1/8" O.D. THIS ITEM IS IN GOOD USED CONDITION. ALL PARTS OF THE TOOL WORK AS THEY SHOULD. BLADE IS FREE OF CHIPS. see my other great items! My house is non-smoking and I am very accommodating. Write with questions before you bid. All my items come from either garage sales. Thrift stores, storage units, etc. Items previously used but in good condition except where noted. I am not an expert on anything but I do my best to describe each item accurately. All items are sold“as is” I package each item to the best of my ability so it can maintain its integrity thru out the mail system. Local pick up is okay let me know in advance. Items are shipped within one or two days after payment. Thanks for looking. Please check out my other items. I do NOT mail international! Payment is expected ... morewithin three days unless other arrangements have been made between us. Feedback is left for you once you leave it for me. This way I know you received your item and are pleased with your purchase! If there is a problem please email me before leaving negative feedback so that I can do everything I can to correct the problem. Thanks! And happy bidding! NO INTERNATIONAL SHIPPING!
|
|
|
Vintage Plumbing tool pipe cutter tubing cutting Old number 2
Cannot find a name on this. Has number 2 on the cutting head part and no. 82 on the handle. This measures 22" L as pictured but will get longer as you adjust the cutting size. Looks like this will cut some very large pipe. ALL OF MY ITEMS COME WITH A SATISFACTION GURANTEE. NEGATIVE AND NEUTRAL FEEDBACK CAN BE AVOIDED. SIMPLY COMMUNICATE WITH ME IF YOU FEEL YOUR PURCHASE WAS NOT AS STATED. Check out my ebay store Bottom Buck Bargains! Different items added all the time!
|
|
|
Ridgid No. 4-S Heavy Duty 2" To 4" plumbing Pipe tubing Cutter w/ handle
Good Ridgid 4S 2" to 4" pipe/tubing cutter. Good condition. Flat rate shipping to the lower US 48 states only of $16.5
|
|
|
Ridgid No. 4-S Heavy Duty 2" To 4" Plumbing Pipe Tubing Cutter One Wheel
Ridgid No. 4-S Heavy Duty 2" To 4" Plumbing Pipe Tubing Cutter One Wheel Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Armstrong Bridgeport No. 2 Tubing /pipe Cutter
You are bidding on a vintage No. 2 Armstrong Bridgeport 1/8 to 2" tubing pipe cutter. Unit is 17" in length. Cutting wheel is sharp and it is solid. Threads are a little stiff when sizing. Item will ship to the US lower 48 only. Posted with
|
|
|
Ridgid No 106 Inside pipe 2" & 3" Internal Tubing Tube Cutter Piping Aluminum
Ridgid No 106 Inside pipe 2" 3" Internal Tubing Tube Cutter Piping Aluminum Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Item is one used Ridgid No 106 Inside pipe 2" 3" Internal Tubing Cutter. Overall condition is good I do Not end the auctions early.Or modify the price. So please don't ask. Local pickup is always welcomed. Shipped items will be charged a handling fee which is already in the shipping calculator. The shipping shown is only an estimate generated by the ebay calculator.Shipping price may go up or down.Please wait for an actual invoice from us before you pay.may save you some money) Please see all pictures(actual Item) as these are part of our description or come by in person to inspect this item.We are located at 829 n. Tustin Ave. Orange.CA 92867-7130. ... morePlease ask questions before bidding Your bid is you contract All items are secondhand Shipping: Domestic packages are sent UPS ground Insured Signature Required to all physical addresses USPS Insured to PO Boxes. Buyer pays shipping and insurance costs. Buyer pays shipping for returned or exchanged items. All packages are insured International Packages are sent USPS Airmail Insured International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. Do not confuse them for additional shipping charges No Falsifying documents No Shipping to Asia.South America,Africa,Indonesia or Nigeria! We ALWAYS offer Local Pick up. Payment: Auction Terms(Not Negotiable) Your bid is your contract to pay for the item. We accept: MASTERCARD/VISA/AMERICAN EXPRESS/DISCOVER/DINERS CLUB Merchant Credit accepted Direct by Telephone 714-633-0740 Confirmed Verified
|
|
|
GENERAL HEAVY DUTY TUBING CUTTER #125 1/2 to 1 1/2 inch pipe great condition
General# 125 tubing/ pipe cutter Barely used. If ever. 1/4 to 1 1/2 inch capacity. Payment via PayPal only. Shipping only to areas served directly by US Postal Service. Ships within 1 business day of your payment.
|
|
|
Craftsman Quick Release 1/8" to 1-1/2" Tubing Pipe Cutters Plumbing Tool Red NR!
Up for auction we have a Used pair of Craftsmen Quick Release 1/8” to 1-1/2” Tubing Pipe Cutters. These cutters are used by Plumbing and HVAC Technicians. They are red in color. Please look at all pictures for a better description. From a PET and Smoke Free Home. Please Ask Any and All Questions Prior to Bidding. I Ship To US Only. I Ship Within 3 Business Days of Received/Cleared Payment. Check Out My Feedback and Bid With Confidence. Good Luck and Happy Bidding. Please Check Out All My Other Listings. I Will Combine Shipping If More Than One Item Is Purchased In The Same Week.
|
|
|
RIDGID A-20 tubing cutter....cuts up To 2 Inch Pipe
RIDGID Tubing cutter Posted with
|
|
|
RIGID MODEL 20 PIPE AND TUBING CUTTER 5/8 TO 2 1/8
WELCOME UP FOR AUCTION IS A RIGID MODEL 20 PIPE CUTTER. ITEM IS USED AND IN GREAT WORKING CONDITION PICTURE IS THE ACTUAL ITEMS YOU WILL RECEIVE. I DO COMBINE SHIPPING ON MULTIPLE ITEMS WON. PAYMENT MUST BE MADE WITHIN 3 DAYS OR ITEM WILL BE RELISTED. ORDER NOW- WE SHIP FAST! PLEASE EMAIL ME WITH ANY QUESTIONS.
|
|
|
GOOD USED RIDGID PIPE CUTTER 1/8"-2" TUBING 2-A STEEL PLUMBING AUTOMOTIVE TOOL
HERE'S A GOOD USED RIDGID PIPE CUTTER FOR MAY JOBS. PART#2-A. CUTS 1/8" TO 2" PIPES. THE BLADES ARE IN GOOD CONDITION. THANKS FOR LOOKING. SAVE A BUNCH ON MY PARTS. $$$$$$$$ I ALSO ACCEPT CREDIT CARDS JUST IN CASE YOU DON'T WANT TO USE PAYPAL. Check out my!
|
|
|
RIDGID 1A Heavy Duty 1/8"- 1 1/4'' Pipe Tube Tubing Cutter Rigid No 1-2
Up for auction is a Rigid No. 1 A heavy duty pipe cutter in great condition. Cuts 1/8" to 1 1/4" pipe. I have the 2A listed also and gladly combine shipping.
|
|
|
RIGID No20 PIPE TUBING CUTTER 5/8" - 2 1/8"
Up for auction is this RIGID No20 PIPE TUBING CUTTER 5/8" 2 1/8" VERY GOOD USABLE CONDITION All my items are sold as is with all faults PLEASE READ DESCRIPTION BEFORE BIDDING PLEASE ASK ANY QUESTIONS BEFORE BIDDING Thank you for checking out my stuff BOYCOTT CHINA Happy bidding
|
|
|
Tubing Cutter 5/8 to 2 1/8" conduit and pipe cutter HEAVY DUTY
Slighlty used Tube Cutter. Has my name on the item in acouple of place but its in great condition RIDGID#20 Tubing Cutter 5/8-2-1/8" conduit and pipe cutter HEAVY DUTY WHEEL Cuts clean square cuts, Cuts copper. Brass, aluminum and thin wall conduit, Includes X-CEL knob for quicker cutting, Capacity: 5/8-Inch-2-1/8-Inch, Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923. Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. ... moreThe Ridgid 32925 tubing and conduit cutter makes clean, square cuts easily on copper, brass, aluminum and thin wall conduit. It now includes the X-CEL knob for quicker cutting. Also it comes with a convenient forld-away reamer. Features: Clean. Square cuts are easily made on copper, brass, aluminum, and thin-wall conduit.Nos. 10, 15, 20 feature a convenient fold-away reamer.No. 30 is rated for larger diameter steel and stainless steel tubing.No. 15-SI is especially designed for stainless steel tubing.Heavy-Duty Wheel.Type: Tube Cutter.Price is for 1 Each.
|
|
|
REED TC3QA 3/8" to 3 1/2" (10-90mm) Quick Release Plastic Tubing PVC PIPE CUTTER
GOOD USED CONDITION AS SEEN IN PHOTOS SCRATCHES. SMUDGES, PLATE WEAR ON TOOL(SEE PHOTOS) WORKS GREAT MADE IN U.S.A. WE WILL DO OUR PART TO SHIP YOUR ITEM WITHIN 24 HOURS OF RECEIPT OF PAYMENT. BUT WE CANNOT GUARANTEE ARRIVAL TIMES SIN CE WE HAVE NO CONTROL OVER THE SHIPPING CARRIERS. WE SHIP ONLY ON WEEKDAYS(N EVER ON WEEKENDS. NO EXCEPTIONS) SHIPPING TO 48 LOWER STATES ONLY: USPS PRIORITY FLAT-RATE PADDED BUBBLED ENVELOPE MAIL SHIPPING: $4.99 WE ONLY SHIP USPS PRIORITY MAIL TO HAWAII AND ALASKA* SHIPPING TO HAWAII. ALASKA COULD BE HIGHER PLEASE ASK FOR SHIPPING COSTS PRIOR TO PAYING, UNLESS LISTING SAYS"USPS PRIORITY FLAT-RATE" NO INTERNATIONAL SHIPPING*NO SHIPPING TO PUERTO RICO OR GUAM*NO SHIPPING TO APO/FPO ADDRESSES PLEASE EMAIL US WITH ANY INFORMATION OR QUESTIONS. WE DO OUR BEST TO PROVIDE THE MOST ACCURATE INFORMATION FOR ... moreEACH LISTING. MOST ITEMS ARE USED(UNLESS OTHERWISE STATED) AND NORMAL WEAR AND TEAR SHOULD BE EXPECTED. ALL ITEMS ARE SOLD AS DESCRIBED AND AS IS(UNLESS OTHERWISE STATED) ITEMS ARE PURCHASED FROM ESTATE SALES. 2ND HAND STORES, GARAGE SALES, AUCTIONS, AND SOMETIMES CONSIGNMENTS, SO WE DO NOT ALWAYS KNOW THEIR HISTORY TRACKING/CONFIRMATION INFORMATION WILL BE AUTOMATICALLY UPLOADED TO YOU BY EBAY WHEN WE SHIP YOUR ITEM WE STRIVE TO KEEP OUR SHIPPING PRICES LOW AND WILL PACKAGE YOUR ITEM WITH CARE. PLEASE MAKE PAYMENT WITHIN 4 DAYS OF AUCTION ENDING IF PAYMENT IS NOT RECEIVED WITHIN 4 DAYS EBAY NON-PAYING BIDDER PROCESS WILL BEGIN THANK YOU FOR LOOKING AT OUR AUCTIONS!
|
|
|
GENERAL HEAVY DUTY PVC, IRON PIPE CUTTER 2 5/8" TUBING #127 MINT
BLADE VERY GOOD CONDITION.
|
|
|
Pipe Tubing Cutter Lot: RIDGID No.10 General 1/4" - 1 1/2" C Clamp 1420-C 2"
2 tubing cutters and a clamp RIDGID Tubing Cutter NO.10 GENERAL PIPE TUBING CUTTER 1/4" 1 1/2" Adjustable C Clamp 1420-C 2" Heavy Duty C-Clamp ESTIMATED VALUE: $30- $50 This auction starts at $10.95 Free Shipping Shoot me an offer if you so feel inclined. Please be mindful of cleaning needed As usual all vintage items should expect normal wear and tear for items of this vintage nature. As usual low starting price- FREE SHIPING- Returns allowed if not as describe PLEASE SAVE ME AS ONE OF YOUR FAVORITES(ABOVE) I HAVE A WHOLE ATTIC(2000 SQUARE FEET) THAT WILL TAKE ABOUT 5 YEARS TO GET RID OF- So make sure you check out our Unique. Antiques, vintage and collectible items that come in every day. My items come from a SMOKE-FREE Home We are not experts. So if you receive an item that does not meet your satisfaction. Please contact ... moreus. We will do everything we can to make you a satisfied customer. I will provide VERY CAREFUL PACKAGING- Please have confidence in my feedback for over 700 items. a couple of mishaps/ not perfect: SO SORRY! I try as hard as possible to keep satisfied customers; I promise)
|
|
|
RIDGID TUBING/PIPE CUTTER #40-FOR 2" TO 4"-RIDGE TOOL CO.
Used Ridgid tubing cutter model No. 40 for 2" to 4" tubing. Is in good working condition.The cutter has no nicks but might need to be replaced. If you have any questions please ask. I ship within 24 hours of payment,except Sundays. Thanks
|
|
|
Reed Tubing Pipe Cutter Single Wheel Quick Release TC2QB 1/4" - 2 5/8"
Reed Tubing Pipe Cutter Single Wheel Quick Release TC2QB 1/4" 2 5/8" Up for auction this week we have a used Reed TC2QB Tubing pipe cutter. Designed to cut 1/4" 2 5/8" copper. Aluminum, light wall steel, stainless steel. Cutter measures 8" in length, quick release works as it should as well as the adjustment knob turns freely. Cutter is in good used condition with some light scuffs to the red paint. Cutting wheel is free of any nicks or chips. Overall good USA made tool. P lease review pictures to get a better idea of the item offered in this listing. Checkout our other auctions for some other interesting items. We will combine shipping. Thank you and have a Blessed Day. Please note: We only accept PayPal. No other form of payment is accepted. If you do not have a paypal account. You can still pay through paypal using ... moreyour debit or major credit card. Payment must be received within 5 days of end of auction. We will only ship to a Confirmed paypal address. If your address is not confirmed this will delay shipping. Address will have to be confirmed before shipping. International bidders we will only ship to the address registered with paypal. USA shipping: Will be by US Postal Service or UPS. No local pickup is offered. We will Not ship using your UPS account number. International shipping will be by US Postal Service Express Mail only. No Exceptions. Please do not email us requesting other shipping methods. International bidders we will not declare item as a gift or at a lesser value. We ship Monday- Friday. Usually within 24 hours of cleared payment. Please look at the pictures and read the entire description for the item that you're bidding on. If you still have questions. Email us before bidding. We usually respond the same day, or the next morning. Special request made after the auction has ended will not be honored. Email us with any request before bidding and before auction has ended. Thank you. You can bid with confidence. Knowing that you will be treated in a fast and professio
|
|
|
Pipe Cat Copper Tubing Cutter & Cleaner 9.6v w/2 Batteries & Case~Free Shipping
Welcome to"ShipsFree2You" This means you NEVER PAY A SHIPPING AND HANDLING FEE! Today we have the pleasure of offering you a excellent Previously Owned Pipe Cat Copper Tubing Cutter and Cleaner Includes 2 9.6v Batteries and charger*Includes carry case* Runs strong and batteries hold a good charge* Please feel free to ask questions* Your item will be shipped for FREE via USPS or UPS. Free Shipping is for the Lower 48's only* We only accept payment via Paypal. Once your payment has been received we will process your item for shipment within 2 business days. Once your item is shipped you will receive an email from Ebay and or Paypal with your tracking informaiton. We process shipments Monday thru Friday. Sorry we do not ship on Saturdays or Holidays. We are open Monday thru Friday from 10am to 5pm. All emails are answered during ... morebusiness hours. At this time we do not ship internationally.
|
|
|
Craftsman No. 5533 Tubing Cutter Pipe Plumbing Tool Ready 2 Use Copper Iron
Here is a ready to use hand held tubing cutter marked"CRAFTSMAN No. 5533REG U.S. PAT. OFF" Measures 5 1/2" in length closed. And cuts up to 1 1/8" tubing. Used with some dirt and grease but still good condition ready to be put to work! Check out my! Be sure to add me to your! Please ask for more photos if needed! I will combine similar items so please view my other auctions! Insurance optional at Buyer's cost/risk. Please ask questions as all items sold"AS-IS" I POST FEEDBACK AFTER THE BUYER POSTS FIRST TO CONFIRM ALL IS GOOD! Australian and Canadian Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be ... moreprior to bidding/buying.These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Thank you for viewing my Auction! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
vtg. Craftsman pipe tubing cutter 1/4- 1 1/2 capacity needs blade Made in USA!
vtg. Craftsman pipe tubing cutter 1/4- 1 1/2 capacity needs blade Made in USA! Vintage Sears Craftsman tubing cutter with a capacity of 1/2 to 1 1/2 pipe or tube. Heavy and strong with light rust. It needs a blade. but then I'd guess they all do after a while. This one is missing the blade and the screw that holds it in place. Burr-removers on the back side. I accept PayPal. If you wait to pay after you win. I will carefully package your purchases together and invoice you to include your preferred shipping method. eBay takes 9% of whatever is paid for your postage out of your purchase price. In order to cover finding the box. Buying the packing material, printing a label and packing slip, tape, taking the parcel to the post office and paying for the shipping, I have added.49 for handling. This allows me to sell at a lower price. I am ... morethrilled to combine items for shipping and I will only ask for the handling once. Please wait for an invoice so we can get the best price for you on the shipping. I am a very fast shipper, usually getting your purchase on the way the same day as you pay. Once you win something, you should have it as soon as possible! Paypal accepted. If our communication is 2-way. We shouldn't have to deal with returns. Ask questions, require more photos, whatever it takes. I'd even rather cancel a bid or a sale than ship you something you're not sure about. Of course if an item isn't as described, it can be returned. Grace 2006 has been selling on eBay since 2006 and I am a Christian retired person. Not a business. It is my personal delight to move the things I love into the home of someone else who would love to have them. Although I am rather antique myself, I'm not an antique expert and don't know the markets, although much of what I have is antique and collectible. Most of it is gently used and hard to find elsewhere. My home is totally nonsmoking but is rescue-pet friendly(an australian shepherd and two cats) The pets do not use the room where eBay items are waiting
|
|
|
RIDGID 2A PIPE CUTTER 1/8" TO 2" / RIDGID PIPE / TUBING CUTTER (RECONDITIONED)
FOR SALE RIDGID PIPE CUTTER RECONDITIONED#2A 1/8" TO 2" I SHIP WORLDWIDE THESE CUTTERS ARE DISASSEMBLED CLEANED PAINTED LUBED AND PARTS CHANGED WHERE NEEDED. THIS PIPE CUTTER IS $194.95 NEW FROM RIDGID SO HERE IS YOUR CHANCE TO GET A GOOD DEAL ON A GREAT CUTTER. IF YOU HAVE ANY QUESTIONS EMAIL ME I WILL ANSWER THEM. Check out my! Combined shipping is available on auctions ending within three(3) days of each other. Please pay within four(4) days of auction end or item may be relisted. We strive for five star service. If you are happy with your purchase. Please leave positive feedback and I will do the same. International Buyers- Please note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office ... moreto determine what these additional charges will be prior to bidding/ buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up- do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as'gifts' US and International government regulations prohibit such behavior.
|
|
|
Reed TC4Q 1 7/8" - 4 1/2" tubing and plastic pipe cutter
Excellent condition. Used lightly, with 3 extra new cutting wheels(2- 30-40P for ABS and PVC, and 1- 30-40 for CU, AL, and steel tubing) My personal tool, bought new 35 years ago. These Reed cutters are simply the best for cutting plastic pipe: Nice square end, and no chips and plastic sawdust in your pipe! Comes with paper explaining the different wheels, and operating instructions. Sorry. Photos show 4 extra wheels, but ships with 3 as described. See my other pipe tools: Reed TC2Q tubing cutter; Ridgid 00-R ratchet threader; Ridgid#1 Pipe Threader; Toledo#0 vise(up to 2" pipe) on Nye#25 stand; set of pipe taps and reamers; Vulcan 33 chain pipe wrench(pipe tong) and Ridgid#25 extractor set. Note about shipping: We are located on a small island. Service is by boat. USPS and UPS only, Monday, Wednesday and Friday. Items must be in the ... morequeue before noon to go out. As winter comes, bad weather or wind can cancel the boat. If there are delays, we will contact the buyer promptly.
|
|
|
Ridgid Tubing Cutter #205 - 1/4 to 2-3/8 OD Pipe Copper Brass Aluminum Tool
Has spare wheel in the handle. All there. Ready to go to work. Questions welcome.
|
|
|
OLD PIPE/TUBING CUTTER MODEL 1S 1/8"- 1 1/2"
Listing this old pipe or tubing cutter from Grandpas shop. I couldn't find a brand name on it. Looks like a good old vintage tool.
|
|
|
Reed TC2Q 1/4" - 2 3/8" capacity O.D. tubing and plastic pipe cutter
ITEM SPECIFICS: Reed TC2Q 1/4" 2 3/8" capacity O.D. tubing and plastic pipe cutter. Excellent condition. Used lightly, with 3 extra new cutting wheels(2- OP2 for for ABS and PVC, 1- 0 for CU, AL, and steel tubing) My personal tool, bought new 35 years ago. These Reed cutters are simply the best for cutting plastic pipe: Nice square end, and no chips and plastic sawdust in your pipe! Comes with paper explaining the different wheels, and operating instructions. Sorry. The photos only show two extra wheels. It does ship with 3 extras. See my other pipe tools: Reed TC4Q tubing cutter; Ridgid 00-R ratchet threader; Ridgid#1 Pipe Threader; Toledo#0 vise(up to 2" pipe) on Nye#25 stand; set of pipe taps and reamers; Vulcan 33 chain pipe wrench(pipe tong) and Ridgid#25 extractor set. Shipping We are on a small island with mail and parcel ... moreservice only three times a week. On Monday, Wednesday, and Friday. For a parcel to go out, it has to be processed before noon. We try to ship within three days of receiving an order, please understand our situation. Mail comes in on a boat, and parcels go out later on the same boat. We can ship by USPS and by UPS. I have no telephone. We will let you know if there is any delay(for instance, a storm) Insurance: Returns: Buyer pays return shipping. 100% refund on items returned in good condition in 14 days. We are happy to combine shipping on multiple items wherever possible. Please let us know. Notes: My name. Fred Richardson, is etched on many of these tools, often visible in the photos.
|
|
|
"RIDGID" HD PIPE CUTTER: #No.2A, CUTS 1/8"-2" PIPE & TUBING, MADE IN U.S.A., VGC
Vintage& outstanding quality. U.S. made RIGID No.2A HEAVY DUTY PIPE CUTTER, still in very good overall condition, composed of solid steel with hardened cutting wheel and twin roller guides, plus adjustable jaw running on alloy T-handle with threaded steel screw shaft on HD base rails. Adjustable for pipe& Tubing diameters of approx. 1/8" to 2" OD, this heavy duty RIGID Pipe Cutter will handle most all metal pipe& tubing types available, as well as heavy wall PVC, plastic, poly types of course. Condition is excellent still, showing little or no wear to hardened cutting wheel on moving upper jaw, or the rollers on fixed lower jaw. Factory red paint on exterior has freckled& worn thin from tool box carry, but there are NO cracks, bends, welds, or corroded areas visible and the screw mechanism is undamaged and opens/closes ... morewith one hand as smoothly as they come. When you gotta cut pipe or tubing on the job or around the farm or ranch, there is no better way to do so than with a rotating pipe Cutter like this robust, U.S. made Rigid No.2A. period. A hack saw or a torch just leaves you with a ragged edge to clean up of course, while this Rigid 2A leaves a smooth, perfectly even& ready-to-go edge on a dead flat rim. Actual weight of this big RIGID No.2A Heavy Duty Pipe& Tubing Cutter is approx. seven& one half(7 1/2) pounds, just as shown here.See Photos) Recently purchased at Estate, Grandpa had a few large sized hand tools from his working days by the bench, all of which we purchased as a lot after a quick inspection. We were very pleased to have acquired this large& robust RIGID Model No.2A HD Pipe Cutter in among them of course. as we know you will be too! Retail cost on these big USA manufactured RIGID Pipe Cutters is in the $150 to $200 range at retail, so somebody's loss is very much your gain here. Why pay full retail plus tax to get one of these U.S. made RIGID No.2A Pipe Cutters at your local industrial supply house when this little used, heavy duty Pipe Cutter can
|
|
|
Reed 1 7/8" to 4 1/2" Pipe Cutter Tool with Quick release Tube Tubing Cutter
Reed 1 7/8" to 4 1/2" Pipe Cutter Tool with Quick release Good Working Condition please see all photos if you would like anymore photos or have any questions please contact me please see the other listings in my store i have a 3Pc set Of these Cutters items posted same or next day priority mail Thank you for viewing
|
|
|
Gould Imperial Tubing Pipe Cutter 3/8'' - 2-5/8 OD Plumbing Heating HVAC AC Tool
Imperial Gould#206-FD quick release tubing cutter that does from 3/8' to 2-5/8' OD. cutter wheel and rollers are in very good shape and free moving.If you slide it over the end of the pipe it does 3-1/8' I believe.Comes as shown in pic.Low starting price.Shipping is free and to U.S.A. only.b-147 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RIDGID 2A/202 Heavy Duty Pipe & Tubing Cutter 1/8" - 2" Slightly Used
RIDGID 2A/202 Heavy Duty Pipe& Tubing Cutter 1/8" 2" Slightly Used The pictures are of the ACTUAL item that you will receive; What you see is exactly what you will get. I use more pictures than most other people on ebay because I believe the pictures. Especially the close-ups, give you a MUCH better idea of what you are actually bidding on. New items have been opened only for the pictures. I accept payment by PayPal. You can use your credit card or e-check through PayPal if you need to. You can also pick up in person in Long Beach. California. My auctions never have a reserve price. Just always low opening bids or fixed price listings. I guarantee a smooth transaction with fast shipping and excellent packaging and always recycled packing materials. My feedback speaks for itself. I will always be happy to ship internationally. ... morePlease email me with questions you may have. I always combine shipping on any multiple auctions you win. On large domestic shipments. There may be an extra surcharge if you have a rural address. I am not a commercial operation. No fancy templates; No endless boilerplate; No confusing terms& conditions; No fine print. Just an honest guy selling a few honest items. Check out my store to see my other listings. Thanks! Payment is expected when auction is ended. I ship very fast as soon as payment is received. gsrx_vers_525(GS 6.6.5(525)
|
|
|
Ridgid Tubing or Pipe Cutter #205 Cuts 1/4" to 2 3/8" Used-Works Good
Ridgid Tubing or Pipe Cutter#205 Cuts 1/4" up to 2 3/8" tubes or pipes Stamped with Ridge Tool Co. U.S.A. Empire 2 Does have some scratches as you can see in the pictures Used. But still works good Please email me with any questions I will gladly combine shipping when possible Please take a look at my other items. I list several different types of items List something almost every day Payment should be made within 3 days of close of sale Shipment will be made next day after payment clears Shipping is calculated by weight. Charges are set by USPS If you are going to be late paying. Please contact me From a pet and smoke free home Thanks for looking. Have a nice day!
|
|
|
Nice Imperial Tubing Pipe Cutter 3/8'' - 2-5/8 Model 206-FB
Nice Imperial Tubing Pipe Cutter 3/8' 2-5/8 Model 206-FB I combined shipping thanks Return policy If you are not happy with your purchase based on my discription. We provide a money back guarantee within 30 days of purchase.The product must be in the exact condition that it was shipped in. Returns will not be accepted if the part has been mistreated. Misused or damaged.Return shipping charges will be the buyers responsibility. Actual Photos: We take pictures of the items that we sell and those are the only pictures in our ads. No stock photos, no gambles, what you see is what you well receive. Shipping: We ship within two business day after payment is received. We ship USPS. We need a physical address location. We cannot ship to P.O. boxes We ship to the 48 contiguous US states only. We DO NOT ship to HI. AK, PR or any APO's or FPO's. ... moreNO INTENATIONAL AT ALL IF YOU BID IT WELL BE CANCELED. ALL BUYER SHOULD HAVE CONFIRMED MAILING ADDRESS IN PAYPAL FOR SHIPPING THANKS. Check out my other items. 4122013
|
|
|
Metal Pipe Cutter 5/8" to 2 1/8 inch OD Tubing Cutter, Pipe tool
Metal Pipe Cutter 5/8" to 2 1/8" OD Tubing Cutter. Pipe Tool Unbranded Good used condition. No brand name shown anywhere. Has built in reamer which is stamped JAPAN. Overall length when fully opened is approx. 11 1/2"
|
|
|
Ridgid no 40 Pipe Tubing Cutter 2"-4" NEEDS CUTTER WHEEL USA Tool
Ridgid no 40 Pipe Tubing Cutter 2"4" NEEDS CUTTER WHEEL USA Tool BIN Up for auction is this Ridgid no 40 2"4" tubing cutter. Good used tool needs cutter wheel. If you have any questions please ask. My auctions end nightly between 8:00 and 8:30 PM eastern time. Check my other listings while you're here. I will be listing many parts and farm related items over the winter months so check back often or add me to your favorites list. Thanks for looking. PAYMENT: You have up to 7 days to pay thru PAYPAL. If you would like to pickup an item cash will be excepted but will need payment within 1 week.
|
|
|
CRAFTSMAN PIPE TUBING CUTTER 1/4-1-1/2 CAPACITY w/ imperial flaring tube holder
CRAFTSMAN PIPE TUBING CUTTER 1/4-1-1/2 CAPACITY w/ imperial flaring tube holder CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. cutter looks to be good condition.cutter looks good. I didnt test it but i dont see any nicks or damage to the wheel.it is replaceable if needed.nice condition with normal wear.6 1/2" long fully closed.the tube holder is imperial, the flaring tool is unmarked but good heavy duty.the rod isnt original but does fit it, it does fall out but could easily ding the ends to keep it in. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ... moreARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. ANY REFUNDS GIVEN WILL BE MINUS SHIPPING COSTS.THE ONLY REASON ACCEPTED FOR RETURN IS IF A MISTAKE WAS MADE IN THE DESCRIPTION. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
|
|
|
2 Ridgid Tubing & Conduit Cutter No. 15 20 3/16" - 2 1/8" Capacity tube pipe
Description You are bidding on two(2) used Ridgid Tubing& Conduit Cutter. You are bidding on the following: 1] Ridgid No. 15 Cutter. 3/16" 1 1/8" Capacity. 1] Ridgid No. 20 Cutter. 5/8" 2 1/8" Capacity. Condition Item is used. Shipping& Handling I can ship USPS or FedEx Ground. Buyer pays $13.97 shipping and handling(shipped in 48 States) We will combine shipping and reduce S&H charges in most cases. I accept Paypal. Tax Louisiana residents will be charged a 4% sales tax. id: 38.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141f0111fde-0x103-
|
|
|
RIDGID MODEL #42A PIPE TUBING CUTTER UP TO 2 inch 4 WHEELS #1
RIDGID MODEL#42A PIPE TUBING CUTTER UP TO 2 inch 4 WHEELS#1 RIDGID MODEL#42A PIPE TUBING CUTTER UP TO 2 inch 4 WHEELS All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ... moreARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
Ridgid Pipe,Tube,Tubing Cutter,No.153 Tool,1-1/4" to 3-1/2",31mm to 88mm,Plumber
Ridgid Pipe.Tube,Tubing Cutter,No.153 Tool,1-1/4" to 3-1/2"31mm to 88mm,Plumber use. Very good, used condition. Slight use wear. Working fine. Sharp cutting wheel& smooth rollers. Spring loaded. The international shipping price given by Ebay is usually wrong, more expensive! PAYPAL PREFERRED! Will combine shipping to save you $$$$. All items listed are used& as is, as found, unless otherwise stated. Nothing is perfect. Priority is FAST, Parcel Post is SLOW! DELIVERY CONFIRMATION& handling is included in shipping cost. ANY HOLDUP in INTERNATIONAL delivery is usually due to CUSTOMS BOG DOWN or SLOW POST OFFICE! International items may not get there for 3 MONTHS, others quicker. PLEASE DO NOT ASK ME TO LIE TO YOUR GOVERNMENT ABOUT PRICE,YOU CAN DO THAT! Payment Information: Within U.S.A. Buyer to pay Ebay Bid Price + USPS ... morePriority Mail or Parcel Post. Delivery Confirmation& $2.00 for handling& fee charges. International Purchases-INTERNATIONAL SHIPPING IS NOT CHEAP ANYMORE! Buyer to pay Ebay Bid Price + First Class Mail International or Priority. Mail® International& $4.00 for handling& fee charges
|
|
|
Ridgid # 4 S Heavy Duty Professional 2" To 4" Plumbing Steel Pipe Tubing Cutter
For sale is a Ridgid# 4-S heavy duty pipe cutter. It cuts sizes from 2" to 4" The cutting wheel needs replacement. But the guiding wheels(rollers) are in excellent conditions and run very smoothly. Everything in this tool runs very smooth and tight. PLEASE LOOK TO THE PICTURES FOR MORE DETAILS AND ASK ANY QUESTION YOU MAY HAVE. WHAT YOU SEE IS WHAT YOU GET AND YOU CAN BUY WITH CONFIDENCE BECAUSE YOUR MONEY BACK IS GUARANTIED WITH NO QUESTIONS ASKED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1433327231a-0xf0-
|
|
|
TUBING PIPE CUTTER CLOSE QUARTERS 1/2" THICK 15/32 -1 1/4 CAP OD #52395
DESCRIPTION: TUBING PIPE CUTTER CLOSE QUARTERS 1/2" THICK 15/32- 1 1/4 CAPACITY ODS 1 11/16 DISTANCE FROM OD TO A CUTTER WHEEL 3 HOLES ON OD FOR HANDLE POSITIONS SHOULDER BOLT REPLACES ORIGINAL MISSING HANDLE USED ITEM MAY SHOW SIGNS OF USE INVENTORY#52395 Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. WE DO COMBINED SHIPPING ON MOST ITEMS.
|
|
|
Vintage Pipe/Tubing Cutter NYE Tool Works Chicago No. 2 Saunders Type
Vintage NYE Tool Wks Chicago#2 Saunders Type pipe/tubing cutter- 23 in in total length when fully open and 20" in total length when fully closed- used but looks and works great fully functional- the cutting wheel does have nicks in it- needs cleaned.
|
|
|
2 Ridgid Pipe,Tube,Tubing Cutter,No.00 1/16" to 1-1/8" OD,No.10 1/8" to 1" OD
2 Ridgid Pipe.Tube,Tubing Cutter,No.00 1/16" to 1-1/8" OD,No.10 1/8" to 1" OD. Good, used condition. Some use wear. Working fine. Sharp wheels& moving rollers. Look good. The international shipping price given by Ebay is usually wrong, more expensive! PAYPAL PREFERRED! Will combine shipping to save you $$$$. All items listed are used& as is, as found, unless otherwise stated. Nothing is perfect. Priority is FAST, Parcel Post is SLOW! DELIVERY CONFIRMATION& handling is included in shipping cost. ANY HOLDUP in INTERNATIONAL delivery is usually due to CUSTOMS BOG DOWN or SLOW POST OFFICE! International items may not get there for 3 MONTHS, others quicker. PLEASE DO NOT ASK ME TO LIE TO YOUR GOVERNMENT ABOUT PRICE,YOU CAN DO THAT! Payment Information: Within U.S.A. Buyer to pay Ebay Bid Price + USPS Priority Mail ... moreor Parcel Post. Delivery Confirmation& $2.00 for handling& fee charges. International Purchases-INTERNATIONAL SHIPPING IS NOT CHEAP ANYMORE! Buyer to pay Ebay Bid Price + First Class Mail International or Priority. Mail® International& $4.00 for handling& fee charges
|
|
|
Ridgid No.20 Pipe,Tube,Tubing Cutter,USA,5/8" to 2-1/8" OD,Plumber Tool,Strong
Ridgid No.20 Pipe.Tube,Tubing Cutter,USA,5/8" to 2-1/8" OD,Plumber Tool,Strong. Very good, used condition. Some use wear. Working fine. A real beauty! Smooth. The international shipping price given by Ebay is usually wrong, more expensive! PAYPAL PREFERRED! Will combine shipping to save you $$$$. All items listed are used& as is, as found, unless otherwise stated. Nothing is perfect. Priority is FAST, Parcel Post is SLOW! DELIVERY CONFIRMATION& handling is included in shipping cost. ANY HOLDUP in INTERNATIONAL delivery is usually due to CUSTOMS BOG DOWN or SLOW POST OFFICE! International items may not get there for 3 MONTHS, others quicker. PLEASE DO NOT ASK ME TO LIE TO YOUR GOVERNMENT ABOUT PRICE,YOU CAN DO THAT! Payment Information: Within U.S.A. Buyer to pay Ebay Bid Price + USPS Priority Mail or Parcel Post. Delivery ... moreConfirmation& $2.00 for handling& fee charges. International Purchases-INTERNATIONAL SHIPPING IS NOT CHEAP ANYMORE! Buyer to pay Ebay Bid Price + First Class Mail International or Priority. Mail® International& $4.00 for handling& fee charges
|
|
|
REED ERIE PIPE TUBING CUTTER TC3Q-1/4-3 1/2" OD QUICK RELEASE
Has quite a bit of lot of wear is missing a blade and knob not sure what else.
|
|
|
Ridgid Model 20 Tubing / Pipe Cutter For 5/8 - 2-1/8 Inch Copper Tubing (32930)
Ridgid No. 20 Tubing Pipe Cutter The tool is used and dirty. But functional. See pictures for condition and size. Thanks for looking! Returns Returns accepted for 14 days. Buyer pays return shipping. Shipping Standard Postage( 2- 9) business days We ship the following business day after payment We ask that payment be made within 24 hours of purchase No international shipping Please note: We do not ship on weekends or holidays Feedback We like to earn our 5 star feedback. It matters and is very important to us. If for any reason you are unsatisfied with your purchase please contact us. We will do the best we can to resolve any issues.
|
|
|
RIDGID No 2 Heavy Duty 1/8"- 2'' Pipe Tube Tubing Cutter Rigid No 1 - 2 Nice
This is a RIDGID No 2 Heavy Duty 1/8" 2' Pipe Tube Tubing Cutter Rigid No 1- 2. It is in excellent working condition. It has no engravings or owner marks. Thanks for looking and good luck. I try to describe each item as accurately as possible and I try to photograph and describe any defects that I am aware of. Unless the auction specificity says otherwise all photographs will be of the actual item you are bidding on. Most items will be shipped on the next business day after payment has cleared. Most items will be shipped via USPS or UPS depending on the item and the destination and can only be shipped to a confirmed address. Signature will be required for items with a winning bid of $200.00 or more. Let me know if you prefer to have a signature required for items under $200.00 or have any other special shipping request. I will combine ... moreshipping charges for multiple items whenever possible. I'll do my best to keep shipping charges as low as I can. International bidders please understand that shipping charges do not include customs or import fees that your country may impose. The declared value of the item will be the winning bid amount. Your country may have delays in the customs or the delivery process. Sometimes these delays can be lengthy. Please do not leave negative feedback based on these charges or delays as I have no control over them. If the item is prohibited or restricted in your country the sale will be canceled. Your satisfaction with the item you are bidding on and with the transaction itself is very important to me. Things can happen that are beyond our control. Let me know about any problems or issues that may arise and I will do my best to resolve them. Please keep this in mind when leaving feedback.
|
|
|
RIDGID No. 20 Heavy Duty 5/8"- 2-1/8'' Pipe Cutter Tube Tubing NO CUTTER WHEEL
Ridgid Tool Co. Pipe Cutter 5/8" to 2" Model No. 20. Made in USA. Good used condition. Cutter wheel is missing. Combined. Discounted shipping with my other auctions. Many other plumbing tools listed.
|
|
|
Vintage Craftsman Tubing Cutter 1/4" -1 1/2 inch Capacity,pipe cutting tool,USA
Fine used shape.has reamer tool too. Read the item condition above.Free shipping.ONLY when listed for free shipping,applies to 48 continental United States only,ask for quote if anywhere else.All items will be shipped out promptly(within the day Monday through Friday,not including holidays) and with care.All questions will be answered ASAP.I ship USPS only.All international sales(except Canada) require a $14 registered mail charge on top of shipping charges if it does not already have tracking. All items must be paid in the first 2 days or unpaid item procedures wil be followed.A bid equals a commitment and contract.Vintage electronics or mechanical items have no guarantee on how long they will work as they should be cleaned and lubed by a professional. I am not responsible for postal damage or loss,insurance may be available upon request,if ... morethere is damage open it in front of the postal employees and report the damage to them or refuse the package, so no refunds for this.If a return is authorized by me or other means you must ship the item back in original packing at your cost. Grading of item"New" is unused, Mint" maybe used once but like new, Excellent" has some minor use but great shape,Fine is in normal used shape,no damage to speak of other than regular useage wear, Very good" has some lite dirt,lite wear,maybe a crease or two. Good" has normal useage wear with some dirt,possible creasing and maybe writing but quite readable and a chip depending on item. Fair" Has dirt,a lot of wear,creasing,chips,missing parts, and will need restoration. poor" has major wear and pages loose,dirty,missing,missing pieces and sold for rarity or for parts.Untested" means untested,sold for parts or repair but may work. By buying this item you agree to these rules Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ridgid No.40,2" to 4" Pipe,Tube,Tubing Cutter,Plumber Tool,Very good, used cond.
Ridgid No.40.2" to 4" Pipe,Tube,Tubing Cutter,Plumber Tool,Very good, used cond. Some use wear. Working fine. Sharp wheel& easy turn rollers. A real beauty! The international shipping price given by Ebay is usually wrong, more expensive! PAYPAL PREFERRED! Will combine shipping to save you $$$$. All items listed are used& as is, as found, unless otherwise stated. Nothing is perfect. Priority is FAST, Parcel Post is SLOW! DELIVERY CONFIRMATION& handling is included in shipping cost. ANY HOLDUP in INTERNATIONAL delivery is usually due to CUSTOMS BOG DOWN or SLOW POST OFFICE! International items may not get there for 3 MONTHS, others quicker. PLEASE DO NOT ASK ME TO LIE TO YOUR GOVERNMENT ABOUT PRICE,YOU CAN DO THAT! Payment Information: Within U.S.A. Buyer to pay Ebay Bid Price + USPS Priority Mail or Parcel Post. Delivery ... moreConfirmation& $2.00 for handling& fee charges. International Purchases-INTERNATIONAL SHIPPING IS NOT CHEAP ANYMORE! Buyer to pay Ebay Bid Price + First Class Mail International or Priority. Mail® International& $4.00 for handling& fee charges
|
|
|
Set of two Ridgid & NYE No. 2 -1/8 to 2 Pipe Cutter Tubing Plumbing Tools
SELLING A USED IN GOOD WORKING CONDITION: Set of two Ridgid& NYE Pipe Cutter Tubing Plumbing Tools RIDGID N1-2 N2A 1/8 TO 2 NYE N2NP-1/8 TO 2 PAT# 2566974 ORIGINAL BOX AND MANUALS NOT INCLUDED You will get item just like the photo. Please. Make sure to see pictures and details, if any questions, I will be more than happy to answer. No returns. PAYMENT All Payment by PAYPAL! Payment must be made within 3 days after closing/notification.
|
|
|
LOT OF 2 - PVC Ratcheting Pipe Cutters - 1/2" to 1" poly tubing / plastic pipe
Gently Used. Both cutters are in near new condition. Can be used for any type of plastic pipe. Ratcheting action quickly and smoothly cuts a straight end without leaving burrs commonly left with a saw.
|
|
|
TOLEDO 2-1/4" HEAVY DUTY TUBING & PIPE CUTTER
Vintage Toledo tubing cutter. Cuts from 5/8" to 2-2/4" OD. Posted with
|
|
|
Armstrong no.2T HEAVY DUTY 1/8-2" PIPE TUBE CUTTER TUBING Ridgid Tool
Up for auction is an Armstrong no.2T HEAVY DUTY 1/8-2" PIPE TUBE CUTTER. TUBING Ridgid Tool. Sharpness of the cutter is unknown, this item has been used and is sold as is. Payment is PayPal to a confirmed address only. Thank you. Tim lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144626595ce-0x109-
|
|
|
Ridgid No. 20 5/8in to 2-1/8in Tubing / Pipe Cutter
Item up for Auction is a Ridgid No. 20 5/8in to 2-1/8in Tubing/ Pipe Cutter This item is in very good condition Good Luck and Happy Bidding Bid now and have your item shipped off within 24-48 hours of us receiving your payment! Payment should be made within 3 days of auctions end. We ship Monday thru Friday. And buyer is to include $4.99 for shipping to all 48 of the lower states. Extra shipping fees apply for Alaska& Hawaii. Thanks for looking and good luck with your bidding! Please feel free to email with any questions you may have. We always respond to your emails as quickly as possible: Don't forget to add us to your favorites list, and check out the other items we have listed!
|
|
|
Ridgid No. 202 Pipe/Tubing Cutter ** NO RESERVE** 1/8"-2"
Ridgid Pipe/Tubing Cutter No.202. Cuts pipe from 1/8" to 2" Works great. Some paint wear and rust. See pics for condition. Will combine shipping with multiple auction wins. I will send invoice of exact shipping total with multiple auction wins. Please pay within 3 days of end of auction. Items shipped within 3 days of payment. Ships to US only. Paypal only.
|
|
|
HUGE Ridgid No. 4 Heavy Duty Pipe/Tubing Cutter ** NO RESERVE** 2"-4"
Ridgid Pipe/Tubing Cutter No.4. Cuts pipe from 2" to 4" Works great. Some paint wear and rust. See pics for condition. Will combine shipping with multiple auction wins. I will send invoice of exact shipping total with multiple auction wins. Please pay within 3 days of end of auction. Items shipped within 3 days of payment. Ships to US only. Paypal only.
|
|
|
Ridgid No. 42A 4 Wheel Pipe Cutter,1/2"-2",Heavy Duty,USA Made,Tubing
Ridgid No. 42A 4 Wheel Pipe Cutter. Decent cosmetic condition. Scuffs and scratches. Some surface rust, but no major cosmetic damage that I noticed. Cutting wheels also have some surface rust. But no major damage. If you have any questions feel free to ask. Please check out our other auctions. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. ... moreand international laws. SquareTrade © squaretrade warranty v2.0
|
|
|
24" Ridgid No. 4 Heavy Duty Pipe/Tubing Cutter 2"-4"
VERY NICE No-4 RIDGID TUBING CUTTER. CUTS 2" 4" TUBING LOOKS TO HAVE LITTLE USE. SOME SCRACHES, COMMON TO USE DOES NOT HAVE THE PIPE( BAR) THAT SCREWS INTO THE END. EASY TO MAKE IF NEEDED. PLEASE ASK ANY QUESTIONS BEFORE BIDDING OR BUYING. COMES FROM A SMOKE FREE HOUSE. NOTE: I ONLY SHIP TO LOWER 48 STATES. THANKS FOR LOOKING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144a0115496-0x10a-
|
|
 |