|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
$4.98 Shipping Condition: New Location: Las Vegas, United States Tested Deauther Plug & Play WIFI NodeMCU Lua ESP8266 ESP-12E CH340G -Flashed. The password is deauther. 1 - NodeMCU. 96" OLED Unit. 2 - SLA Slim Smooth ... moreCase. Select and run attack. Very simple and effective.
Buy It Now
$3.50 Shipping Condition: New Location: China For sale is an OLED display for use with the Wemos D1 Mini IOT Device! Screen Size: 64x48 pixels (0.66” Across). Driver IC: SSD1306. Interface: IIC(I2C). ... more1 x OLED Shied. 2 x Normal pins.
Buy It Now
$2.61 Shipping Condition: New Location: China
Buy It Now
$4.98 Shipping Condition: New Location: Silverton, United States Silverton, Oregon. Elcom Components.
Buy It Now
$2.61 Shipping Condition: New Location: China Plus,It uses Micro usb cable to connect. ESP8266 NodeMCU board is equipped with ESP-12E module, which contains the Tensilica Xtensa 32-bit LX106 RISC ... moremicroprocessor powering the ESP8266 chip. This microprocessor supports RTOS and operates at a clock frequency that can be adjusted between 80MHz and 160 MHz.
Buy It Now
Free Shipping Condition: New Location: China 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 2?|a€“a°?¥&a circ;ao?§a?a€&ti lde;a?aμ 6 White 0.96" SPI Serial 128X64 OLED LCD ... moreDisplay Module for Arduino/STM32/51/AVR Description: 100% brand new and high quality No font: take the word with modulo software Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.04W Voltage: 3.3V ~ 5V DC Working Temperature: 30 ℃ ~ 80 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM SPI Interface. Need 4 IO only. Driver IC: SSD1306 Light color: White Pin Definitions: VCC:3.3-5V GND: grounding CLK: clock module MOSI: Data input Cs: Chip select signal D/C: Command/ data change Note: Due to the difference between different monitors. The picture may not reflect the actual color of the item. Thank you! Package includes: White 0.96" SPI Serial 128X64 OLED LCD Display Module x 1 Payment: We accept payment through Paypal ONLY. If you do not have Paypal account. Please registered with(http:www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders. Shipping and handling: Return Policy: We are not responsible for custom duty or import tax. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if your are not satisfied with the item after receive it. We could offer refund. And refund request is available only requests within a week after parcel received& returning the item as the same condition as received. We offer 100% refund if the item is broken before arrival. All you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. All emails will be answered within 1 business day. If you do not receive our reply. Please kindly re-sent your e
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$3.00 Shipping Condition: New Location: China IIC interface. 1 piece White/Blue/Yellow&Blue 0.96" I2C IIC Serial 128x64 OLED LCD LED Display Module for Arduino. Interface type: IIC. OLED display, ... moreno need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Glen Burnie, United States 863~928MHz. USB Interface: Type-C, CP2102 USB-to-Serial. LoRa Support: Integrated LoRa module for long-range wireless communication. LoRa Module: Yes. ... moreBluetooth and WiFi Connectivity: Built-in Bluetooth and WiFi capabilities for wireless communication and connectivity.
Buy It Now
Free Shipping Condition: New Location: China •Part of second-hand products will have obvious scratches on the surface.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Brand Unbranded/Generic MPN Does not apply UPC Does not apply EAN Does not apply.
Buy It Now
$3.99 Shipping Condition: New Location: Derry, United States The MicroView is the first chip-sized Arduino compatible that lets you see what your Arduino is thinking using a built-in OLED display. This is the MicroView ... morecontroller that I received from being a backer for the product on Kickstarter. This particular bundle went for $95 on Kickstarter. It has only been used once and everything is in very good condition. Includes all original accessories such as: MicroView, MicroView Programmer, Solderless Breadboaord, 74HC595 Shift Rergister, 2N2222 Transistors, 1N4148 Diodes, DC Motor with Gear, Small Servo, SPDT 5V Relay, TMO36 Temp Sensor, Softpot, USB Extension Cable, Jumper Wires, Photocell, Tri-color LED, Red and Yellow LEDs, 10K Trimpot, Piezo Buzzer, Big 12mm Buttons, 330 and 10K Resistors,
Buy It Now
$2.99 Shipping Condition: New Location: China Compatible: For the ADF4351 ADF4350 integrated phase-locked loop, introduced this host computer's USB and serial port module. In addition, with 1/2/4/8/16/32/64 ... morecrossover circuits, users can generate RF output frequencies as low as 35 MHz.
Buy It Now
$3.40 Shipping Condition: New Location: China Driver IC: SSD1306. 1/2/5PCS 128x64 White LED display module for Arduino. Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, ... moreetc. Interface type isIIC. Ultra-low power consumption: full screen lit 0.08W.
Buy It Now
Free Shipping Condition: New Location: China 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 2?|a€“a°?¥&a circ;ao?§a?a€&ti lde;a?aμ 6 White 0.96" SPI Serial 128X64 OLED LCD ... moreDisplay Module for Arduino/STM32/51/AVR Description: 100% brand new and high quality No font: take the word with modulo software Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.04W Voltage: 3.3V ~ 5V DC Working Temperature: 30 ℃ ~ 80 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM SPI Interface. Need 4 IO only. Driver IC: SSD1306 Light color: White Pin Definitions: VCC:3.3-5V GND: grounding CLK: clock module MOSI: Data input Cs: Chip select signal D/C: Command/ data change Note: Due to the difference between different monitors. The picture may not reflect the actual color of the item. Thank you! Package includes: White 0.96" SPI Serial 128X64 OLED LCD Display Module x 1 Payment: We accept payment through Paypal ONLY. If you do not have Paypal account. Please registered with(http:www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders. Shipping and handling: Return Policy: We are not responsible for custom duty or import tax. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if your are not satisfied with the item after receive it. We could offer refund. And refund request is available only requests within a week after parcel received& returning the item as the same condition as received. We offer 100% refund if the item is broken before arrival. All you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. All emails will be answered within 1 business day. If you do not receive our reply. Please kindly re-sent your e
Buy It Now
$2.54 Shipping Condition: Neu Location: China 1PC 128x64 Blue/White/Yellow&Blue LED display module for Arduino ( It depends your choice ). Interface type is IIC. Ultra-low power consumption: full ... morescreen lit 0.08W. Blue White Yellow&Blue. Character Colors: Blue/White/Yellow&Blue (as pictures show).
Buy It Now
Free Shipping Condition: New Location: Milner, United States Includes built-in OLED screen - easy to set up. On YouTube look for video wRW32gTLsKE and its corresponding GitHub project ESP32_Youtube_OLED. CNC & 3D ... morePrinting.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China 2 Sets 915MHz ESP32 LoRa V3 Board SX1262 0.96" OLED BT+WIFI Lora Kit with Case for Arduino IOT Smart Home Description: WiFi LoRa 32 is a classic IoT dev-board ... more, it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions. It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers. SX1262 LoRa node chip. Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures. Note: Not include battery Package Included: 2 X Development Board 2 X 915MHz LoRa Antenna 2 X SH1.25-2 Cable 2 X Case See more in the flyfuntech2022.
Buy It Now
Free Shipping Condition: New Location: Milner, United States Includes built-in OLED screen - easy to set up. On YouTube look for video wRW32gTLsKE and its corresponding GitHub project ESP32_Youtube_OLED. CNC & 3D ... morePrinting.
Buy It Now
$3.20 Shipping Condition: New Location: China IIC interface. OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. ... moreVCC: Power + (DC 3.3 ~5v). Display Color: White/Blue.
Buy It Now
$2.88 Shipping Condition: New Location: China
Buy It Now
$2.54 Shipping Condition: Neu Location: China OLED mode: positive. 2:V33 (OLED 3.3V). 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Resolution: 64×128. Module size: 36.5mm×19mm×11.3mm. Display ... moresize: 0.96". Driver chip: SH1107.
Buy It Now
$2.54 Shipping Condition: Neu Location: China Up for sale is an OLED display for use with the Wemos D1 Mini IOT Device! OLED Shiels x1pcs. Screen Size: 64x48 pixels (0.66” Across). Normal pins x2pcs. ... moreDriver IC: SSD1306. Warning: all I/O are designed to be 3.3V compliant only.
Buy It Now
Free Shipping Condition: New Location: China WiFi LoRa 32 V3 Board: Master chip: ESP32-S3FN8 Lora chip: SX1262 USB to Serial Chip: CP2102 Operating voltage: 3.3V to 7V Memory: 384KB ROM, 512KB SRAM, ... more16KB RTC SRAM, 64Mbits (8MByte) SiP Flash Distance: about 2.8KM in open place Max. TX Power: 20dBm - 22dBm Max. Receiving Sensitivity: -139 dBm Operating Temperature: -20 ° C to + 70 ° C Package List: Up to your option.
Buy It Now
$3.00 Shipping Condition: New Location: China Driver IC: SSD1315. Interface Type: IIC. Working without backlight, the OLED display module could give out light by itself. In low ambient light conditions ... moresuch as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
Buy It Now
$2.99 Shipping Condition: New Location: China Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n. Receiver sensitivity up to - 98 dBm.
Buy It Now
$5.95 Shipping Condition: New – Open box Location: Brentwood, United States M252535V CRYDOM SCR Module 1.2 kV Bridge, Single Phase Z510LA40A CAP.
Buy It Now
Free Shipping Condition: New Location: China 1 set of MMDVM Hotspot Module. -Jumbo-SPOT-RTQ is a fully self-contained digital access point that supports DMR, Dstar, P25 and system convergence communications. ... moreFully assembled and tested in a rugged aluminum housing.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China WiFi LoRa 32 V3 Board: Master chip: ESP32-S3FN8 Lora chip: SX1262 USB to Serial Chip: CP2102 Operating voltage: 3.3V to 7V Memory: 384KB ROM, 512KB SRAM, ... more16KB RTC SRAM, 64Mbits (8MByte) SiP Flash Distance: about 2.8KM in open place Max. TX Power: 20dBm - 22dBm Max. Receiving Sensitivity: -139 dBm Operating Temperature: -20 ° C to + 70 ° C Package Includes: 2 x ESP32 LoRa OLED board V3 868/915MHz 2 x 1.25mm-2P Cable 2 x LoRa Case for V3 2 X LoRa Antenna 868/915MHz.
Buy It Now
Free Shipping Condition: New Location: United States It has low power consumption and high performance, making it suitable for beginners and professionals to develop and apply IoT projects. This is an ESP8266 ... more0.96 OLED board that features all the features of a traditional ESP8266 module.
Buy It Now
$2.98 Shipping Condition: New Location: China Driver IC: SSD1306. Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Pin Definition: GND, VCC ,SCL, SDA. 1PC 128x64Blue/White/Yellow&Blue ... moreLED display module for Arduino (It depends your choice ).
Buy It Now
Free Shipping Condition: New Location: Memphis, United States WiFi LoRa 32 V3 Board: Master chip: ESP32-S3FN8 Lora chip: SX1262 USB to Serial Chip: CP2102 Operating voltage: 3.3V to 7V Memory: 384KB ROM, 512KB SRAM, ... more16KB RTC SRAM, 64Mbits (8MByte) SiP Flash Distance: about 2.8KM in open place Max. TX Power: 20dBm - 22dBm Max. Receiving Sensitivity: -139 dBm Operating Temperature: -20 ° C to + 70 ° C Package Includes: 2 x ESP32 LoRa OLED board V3 2 x 915 MHz Antenna 2 x LoRa Case for V3.
Buy It Now
$3.00 Shipping Condition: New Location: China OLED mode: positive. 2:V33 (OLED 3.3V). 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Resolution: 64×128. 1PCS LCD. Interface type: IIC interface. ... moreSupport interface: IIC.
Buy It Now
$2.99 Shipping Condition: New Location: China Wireless Stick Lite ESP32 LoRa V3 without OLED. Supports three major wireless communication protocols, the ESP32 chip, and supports WIFI, BLE, and LoRa ... morewireless communication functions. Three major wireless communication protocols, ESP32 chip, support for WIFI, BLE, and LoRa wireless communication functions.
Buy It Now
$15.00 Shipping Condition: New Location: China Model Number LoRa32 V2.1. SX1276 868MHz Q168. SX1276 915MHz Q211. SX1276 923MHz Q388. LoRa Module: SX1278 / SX1276 Long-range, low-power and secure data ... moretransfer. MCU: ESP32 series of SoCs embedded, Xtensa® dual-core 32-bit LX6 microprocessor.
Buy It Now
$2.99 Shipping Condition: New Location: China A powerful functional expansion board for Seeeduino XIAO of only half Raspberry Pi 4 size. It enables build prototype and project in easy and quick way. ... moreCircuit python is also well supported by this board.
Buy It Now
Free Shipping Condition: New Location: China WiFi LoRa 32 V3 Board: Master chip: ESP32-S3FN8 Lora chip: SX1262 USB to Serial Chip: CP2102 Operating voltage: 3.3V to 7V Memory: 384KB ROM, 512KB SRAM, ... more16KB RTC SRAM, 64Mbits (8MByte) SiP Flash Distance: about 2.8KM in open place Max. TX Power: 20dBm - 22dBm Max. Receiving Sensitivity: -139 dBm Operating Temperature: -20 ° C to + 70 ° C Package Includes: 1 x ESP32 LoRa OLED board V3 1 x LoRa Antenna 1 x 1.25mm-2P Cable 1 x LoRa Case for V3.
Buy It Now
$3.00 Shipping Condition: New Location: China OLED mode: positive. 2:V33 (OLED 3.3V). 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Resolution: 64×128. Interface type: IIC interface. Support ... moreinterface: IIC. Module size: 36.5mm×19mm×11.3mm.
Buy It Now
Free Shipping Condition: New Location: China WiFi LoRa 32 V3 Board: Master chip: ESP32-S3FN8 Lora chip: SX1262 USB to Serial Chip: CP2102 Operating voltage: 3.3V to 7V Memory: 384KB ROM, 512KB SRAM, ... more16KB RTC SRAM, 64Mbits (8MByte) SiP Flash Distance: about 2.8KM in open place Max. TX Power: 20dBm - 22dBm Max. Receiving Sensitivity: -139 dBm Operating Temperature: -20 ° C to + 70 ° C Package Includes: 2 x ESP32 LoRa OLED board V3 2 x LoRa Antenna 2 x 1.25mm-2P Cable.
Buy It Now
$3.00 Shipping Condition: New Location: China Modulation Mode: FSK, GFSK, MSK, GMSK,for LoRa TM, OOK. Supporting the digital RSSI function, such module can make automatic frequency correction. Item ... moreType: Wireless module. 1 x Wireless Module. Frequency Error: +/- 15KHz.
Buy It Now
$3.50 Shipping Condition: New Location: China It has low power consumption and high performance, making it suitable for beginners and professionals to develop and apply IoT projects. This is an ESP8266 ... more0.96 OLED board that features all the features of a traditional ESP8266 module.
Buy It Now
Free Shipping Condition: New Location: China Brand Unbranded/Generic Model 128*64 Blue OLED LCD LED Display MPN 128*64 Blue OLED LCD LED Display UPC Does not apply.
Buy It Now
$3.20 Shipping Condition: New Location: China 0.96" I2C IIC SPI Serial 128X64 White OLED LCD LED Display Module for Arduino Product information Feature Super High Brightness(Adjustable) Super ... moreHigh Contrast(Adjustable) Embedded Driver/Controller Colors: White Drive Duty: 1/64 Duty Pixels: 128x64 Panel Size: 26.70mm x 19.26mm x 1.85mm Active Area: 21.74mm x 11.2mm Pixel Size: 0.15mm x 0.15mm This OLED Part No. is UG-2864HSWEG01. Not UG-2864AMBAG01. Note: If you decide to buy OLED display. You must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support. Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: 30 ℃ ~ 70 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM I2C/IIC Interface. Need 2 IO only. Driver IC: SSD1306 Note: This item come I2C/IIC interface only. Because the hardware reasons. Resulting IIC/I2C bus no ACK response signal, so IIC IIC communication Whitby automated production of OLED modules instead of the standard version. But this can be solved by software. published here for the Arduino library file, you can make this OLED module used in the Arduino system. File description: IIC_without_ACK.cpp- SSD1306 drivers; IIC_without_ACK.h- SSD1306 driver file header; oledfont.c- matrix table( you need to display the contents of the matrix can be calculated by taking the modulus of software after adding this file. Modulo the way" common cathode- out line- Reverse Output" font will take up a lot of space FLASH, please comment out the unwanted font, so there will be enough space Arduino tips) Function: Write_IIC_Byte(unsigned char IIC_Byte) by IIC write an 8-bit data( such as 0xff) Write_IIC_Command(unsigned char IIC_Command) write command to the OLED module through IIC bus Begin_IIC_Da
Buy It Now
$3.50 Shipping Condition: New Location: China Modulation Mode: FSK, GFSK, MSK, GMSK,for LoRa TM, OOK. Supporting the digital RSSI function, such module can make automatic frequency correction. Item ... moreType: Wireless module. 1 x Wireless Module. Frequency Error: +/- 15KHz.
Buy It Now
$3.74 Shipping Condition: Neu Location: China 0.96" I2C IIC SPI Serial 128X64 White OLED LCD LED Display Module for Arduino Product information Feature Super High Brightness(Adjustable) Super ... moreHigh Contrast(Adjustable) Embedded Driver/Controller Colors: White Drive Duty: 1/64 Duty Pixels: 128x64 Panel Size: 26.70mm x 19.26mm x 1.85mm Active Area: 21.74mm x 11.2mm Pixel Size: 0.15mm x 0.15mm This OLED Part No. is UG-2864HSWEG01. Not UG-2864AMBAG01. Note: If you decide to buy OLED display. You must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support. Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: 30 ℃ ~ 70 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM I2C/IIC Interface. Need 2 IO only. Driver IC: SSD1306 Note: This item come I2C/IIC interface only. Because the hardware reasons. Resulting IIC/I2C bus no ACK response signal, so IIC IIC communication Whitby automated production of OLED modules instead of the standard version. But this can be solved by software. published here for the Arduino library file, you can make this OLED module used in the Arduino system. File description: IIC_without_ACK.cpp- SSD1306 drivers; IIC_without_ACK.h- SSD1306 driver file header; oledfont.c- matrix table( you need to display the contents of the matrix can be calculated by taking the modulus of software after adding this file. Modulo the way" common cathode- out line- Reverse Output" font will take up a lot of space FLASH, please comment out the unwanted font, so there will be enough space Arduino tips) Function: Write_IIC_Byte(unsigned char IIC_Byte) by IIC write an 8-bit data( such as 0xff) Write_IIC_Command(unsigned char IIC_Command) write command to the OLED module through IIC bus Begin_IIC_Da
Buy It Now
Free Shipping Condition: New Location: China WiFi LoRa 32 V3 Board: Interface: Type-C ( not micro USB) Master chip: ESP32-S3FN8 Lora chip: SX1262 USB to Serial Chip: CP2102 Operating voltage: 3.3V ... moreto 7V Memory: 384KB ROM, 512KB SRAM, 16KB RTC SRAM, 64Mbits (8MByte) SiP Flash Distance: about 2.8KM in open place Max. TX Power: 20dBm - 22dBm Max. Receiving Sensitivity: -139 dBm Operating Temperature: -20 ° C to + 70 ° C Package Includes: 2 x ESP32 LoRa OLED board V3 868/915MHz 2 x 868/915 LoRa Antenna 2 x 1.25mm-2P Cable 2 x LoRa Case for V3.
Buy It Now
Free Shipping Condition: New Location: United States It has low power consumption and high performance, making it suitable for beginners and professionals to develop and apply IoT projects. This is an ESP8266 ... more0.96 OLED board that features all the features of a traditional ESP8266 module.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States All products are quality checked. We will be happy to resolve. any issues you may have in a cordial and friendly manner. Receiver sensitivity up to - ... more98 dBm.
Buy It Now
$3.80 Shipping Condition: New Location: China
Buy It Now
$3.80 Shipping Condition: New Location: China Part of second-hand products will have obvious scratches on the surface. We promise try our best to help solve any problem.
Buy It Now
$2.88 Shipping Condition: New Location: China OLED mode: positive. 2:V33 (OLED 3.3V). 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Resolution: 64×128. Interface type: IIC interface. Support ... moreinterface: IIC. Module size: 36.5mm×19mm×11.3mm.
Buy It Now
$3.73 Shipping Condition: Neu Location: China Support interface: IIC. 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Interface type: IIC interface. OLED mode: positive. 2:V33 (OLED 3.3V). Module ... moresize: 36.5mm×19mm×11.3mm. Display size: 0.96".
Buy It Now
$3.00 Shipping Condition: New Location: China IIC interface. OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. ... moreVCC: Power + (DC 3.3 ~5v). Display Color: White/Blue.
Buy It Now
$2.99 Shipping Condition: New Location: China A powerful functional expansion board for Seeeduino XIAO of only half Raspberry Pi 4 size. It enables build prototype and project in easy and quick way. ... moreCircuit python is also well supported by this board.
Buy It Now
$5.95 Shipping Condition: New – Open box Location: Brentwood, United States
Buy It Now
$3.89 Shipping Condition: New Location: Las Vegas, United States Tested Deauther Plug & Play WIFI NodeMCU Lua ESP8266 ESP-12E CH340G -Flashed. NEW WiFi Deauther V1.5 OLED Pre Installed Hacking Tool Deauth Attacks ESP8266. ... moreA+ WiFi Deauther V2.0.5 OLED Pre Installed Hacking Tool Deauth Attacks ESP8266.
|
|
|