|
STANLEY HYDRAULIC CRIMP TOOL W/ KEARNEY HEAD -y-
Hi. Up for sale is a used Stanley Hydraulic Crimp tool W/ Kearney type Head, this item has a jaw size 2.6" And a 2000PSI power pressure. INCLUDED: two quick release hydraulic Fittings(1 male. 1 female) This item has been tested and is in good working order. If you have any question please give us a call or drop us an email. Be sure to add me to your! Check out my!
|
|
|
GREENLEE FAIRMONT 48740 UTILITY LINEMAN 5TON HYDRAULIC CRIMPER BURNDY KEARNEY
GREENLEE FAIRMONT 48740 UTILITY LINEMAN 5TON HYDRAULIC CRIMPER BURNDY KEARNEY Greenlee Fairmont 48740 5Ton Crimper Up for sale is a used but in great working condition Greenlee Fairmont 5 ton Crimper. These are pictures of the actual item up for sale. For use with Burndy W dies and Kearney dies. I have a hydraulic power unit and was able to test it works perfectly and has seen very little use.Free shipping to anywhere in the lower 48 states only. Alaska. Hawaii and any US territory please email me for a shipping qoute. I will only ship to a Paypal confirmed address. 48740 Crimping Tool– 5-Ton(4.5 t) 1 in. 25.4 mm) Jaw Completes service entrance crimps in seconds. Accepts Burndy“W” dies and Kearney“O” dies. Comes standard with Kearney“D” die. Head rotates for easy tool positioning. Operates on either Open- or Closed-Center systems. Powered ... morein both the advance and retract directions to prevent hang ups. Relief valve signals operator when crimp is complete. Relief valve assures 5-ton(4.5 t) crimp with 1.400- 2,500 psi(96-170 bar) system. Specifications Capacity(jaw opening) 1 in. 25.4 mm) System: Open- and Closed-Center Hydraulic Systems, Weight: 11.75 lb. 5.3 kg) Length: 18-7/8 in. 479.4 mm) Width: 4 in. 101.6 mm) Operating Pressure: 1.400- 2,500 psi(96- 170 bar) Crimping Force@ 1.400 psi(96 bar) 10,000 lb. 44.5 kN) Flow Rate: 3- 9 gpm(11- 34 lpm) Pressure Port: 3/4- 16 SAE O-Ring, Return Port: 3/4- 16 SAE O-Ring, Please review me feedback and bi d with confidence I will only ship to a confirmed address. I accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much for looking please click below to view my other qaulity tools. A confirmed address is your credit card billing address.NO local pickup available. There is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Please Read Carefully We do not pay for parts of rep
|
|
|
BLACKBURN OD58 COMPRESSION TOOL , FIBERGLASS HANDLES AND 781 KEARNEY DIE SET
YOU ARE BIDDING ON ONE USED BLACKBURN MECHAEICAL COMPRESSION TOOL WITH FIBERGLASS HANDLES AND A NEW KEARNEY 781 DIE SET. SHIPPING IN USA LOWER 48 STATES $15. BY BY FEDEX GROUND. ILLINOIS BUYER ADD 7% SALES TAX. PAY WITH PAYPAL. PAYMENT WITHIN 5 DAYS OF END OF AUCTION.
|
|
|
Kearney md6 style crimpers pick one out
This listing is for 1 and only 1 crimper. The pictures show the 4 styles available. The crimpers come in 25 or 28" lengths and have either 5/8 or O dies in the nose. The crimpers are all properly adjusted and in good working condition. They obviously aren't new but will provide years of reliable service. If the buy it now is executed or your offer is accepted simply tell me which style you want and that will be the one that you will receive. I have large quantities so if you need several of a particular configuration that shouldn't be a problem. Just let me know how many you need. Feel free to ask any questions. Make me an offer!
|
|
|
KEARNEY / COOPER MD-6 STYLE LINEMAN CRIMPERS w/840 INSERTS
UP FOR BID: 1-SET KEARNEY/ COOPER MD-6 STYLE LINEMAN CRIMPING TOOL THIS AUCTION IS FOR THE K/C MD-6 STYLE CRIMPERS SHOWN IN THE PICTURES ABOVE. THE CRIMPERS DO HAVE A SET OF REMOVABLE CRIMPNG TEETH 840's IN VERY GOOD CONDITION FREE OF ANY DENTS. BULDGES OR CRACKS. THE YELLOW FIBERGLASS HANDLES ARE ALSO IN GOOD CONDITION FREE OF ANY DAMAGE. THIS IS A USED TOOL AVAILABLE AT A SUPER PRICE. a2zTexas* All items listed for auction Are guaranteed to be 100% authentic&described to the best of our ability Through written description& attached photographs. 1) All items are to paid for through Paypal Or maybe paid for with Cash if you were to come by our location locally. 2) All items that are shipped, Are to shipped using Fed-Ex Signature Ground Delivery. Usually 3-5day delivery. Tracking numbers will be Provided as soon as shipping labels ... morehave been generated and package is ready for transport. 3) All shipments are made usually 2 business days after The conclusion of our auction. Once payment has cleared& or the first business day following a Sunday or Holiday. 4) All auction items are guaranteed not to be“DOA” unless damaged during the shipping process. If this occurs. A“Full Purchase Price” refund is due to the Buyer ASAP after the package investigation is complete. 5) A“Refund” is also available if the item has been misrepresented in any form or fashion. Items listed are described& tested thoroughly to the best of our abilities. 6) Any questions regarding the item up for bid or any shipping& handling questions regarding the current auction or completed auctions may be asked here. Good Luck& Happy Bidding
|
|
|
Kearney Hydraulic Crimper CT100 55 D Lot HG870
Kearney Hydraulic Crimper. CT100 55 D I gladly combine shipping. I charge regular price shipping for the first item and 1/2 price shipping on each additional item.
|
|
|
10 BURNDY W STYLE MD6 MD6-8 KEARNEY CRIMER DIES IN CASE FREE SHIPPING
The item you are purchasing is a 10 BURNDY W STYLE MD6 MD6-8 KEARNEY CRIMER DIES IN CASE. This item ships as pictured. Free shipping to the lower 48 states only.
|
|
|
KEARNEY 26960 HYDRAULIC ELECTRICAL COMPRESSION HAND CRIMPER B 40 1693
This listing is for a hydraulic crimper. We will be liquidating a lot of tools in the next week or so. So check back for other great deals. Make: Kearney Model: 26960/ B 40 1693 Description: Hydraulic crimper You will receive the exact item pictured.
|
|
|
Kearney Hydraulic Crimper Lot 11786
Kearney Hydraulic Crimper. I gladly combine shipping. I charge regular price shipping for the first item and 1/2 price shipping on each additional item.
|
|
|
KEARNEY Compression/Crimper 6MD 3WD With DIES
Used KEARNEY MD6. 3WD Compression crimper. I am also including a SET of D Dies for this tool(see in pictures) The nose Die is an O. This tool is used but works perfectly. and will except other sizes of dies. Please contact me if you have any questions. Payment is due within 3 days of auction end. Item will ship once payment is received. Check out my other auctions. Thank You
|
|
|
SET J Crimpper DIE KEARNEY
Used Set J Crimping Die. Kearney die's. excellent condition. Payment is due within 3 days of auction end. Item will ship once payment is received. Please contact me if you have any questions. Check out my other auctions. Thank You
|
|
|
SET 1/2" Crimpper DIE KEARNEY
Used Set 1/2" Crimping Die. Kearney die's. excellent condition. Payment is due within 3 days of auction end. Item will ship once payment is received. Please contact me if you have any questions. Check out my other auctions. Thank You
|
|
|
KEARNEY HAND HYDRAULIC COMPRESSION CRIMPER CRIMPING
Kearney Manual Crimpers. Length 34" Long# 19789-1 I have no way of testing these crimpers so I am selling as is. No Refunds.
|
|
|
Kearney Hydraulic Crimper CT1005611 9383 Lot 11784
Kearney Hydraulic Crimper. CT1005611 9383 I gladly combine shipping. I charge regular price shipping for the first item and 1/2 price shipping on each additional item.
|
|
|
KEARNEY Electrician Lineman Compression Crimper Tool Wood Handles
International bidders MUST contact me prior to bidding for a shipping estimate! Up for sale is an Electrician-Lineman Kearney Compression Crimping Tool. It measures about 26" long and has wood handles; it weighs almost 7 pounds. It opens& closes as it should! Please use zoom feature to see details on all photos. Please ask any and all questions. Item is being sold AS IS. SHIPPING& PAYMENT POLICY: Shipping for this item is $18.00 for USPS(United States Postal Service) PARCEL SELECT Mail(2-9 days estimated shipping) for the continental/contiguous/lower 48 states U.S. ONLY. Again. international bidders must contact me PRIOR to bidding for a shipping estimate! Paypal is the only accepted method of payment. Thanks for looking. And please check out all items for sale in my store! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f7a19e6b0-0xf9-
|
|
|
USED KEARNEY HYDRAULIC LINESMAN HAND CRIMPER *
THIS IS A USED BUT IN GREAT WORKING SHAPE KEARNEY HYDRAULIC HAND CRIMPER. IT WILL ACCEPT BURNDY DIES. LET ME KNOW IF YOU HAVE QUESTIONS ABOUT THIS ITEM. WEIGHT TO SHIP IS 17+ POUNDS.
|
|
|
KEARNEY 26" Electrical Terminal Crimper Tool w/ .737 Dies USA Good Cond.
Kearney Electrical Terminal Crimper Tool. MADE IN USA. In good condition. Looks like the dies are removable. Comes with.737 dies installed. Check shipping area for shipping options. Ask any? Sold as-is. Check my feedback. PayPal only for payment. PayPal required for international buyers. Check out my other items!
|
|
|
Kearney md6 style crimper
Kearney md6 style crimpers Condition: USED working well ACTUAL ITEMS ARE SHOWING IN PICTURES 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
|
|
|
Kearney PH Electrical Hydraulic Compression/Crimper/Crimping Tool
Kearney PH Electrical Hydraulic Compression/Crimper/Crimping Tool USED KEARNEY CRIMPER WITH CASE. SORRY. THERE ARE NO DIES INCLUDED WITH THIS OFFER. ONE OF THE LATCHES ON THE CASE IS MISSING THE HOOK. DIMENSIONS ARE BELOW. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# PH OVERALL DIMENSIONS: WIDTH: 6" LENGTH: 12" HEIGHT: 3.5" DIE HOLDERS: 5/8" SHAFT: 1.5" OPENING: 2.5" STROKE: OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. ... moreTHERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES. AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN TH
|
|
|
KEARNEY ELECTRICAL TERMINAL HAND CRIMPING CRIMPER COMPRESSION TOOL
WarnerSales Warner See all my listings: WarnerSales KEARNEY ELECTRICAL TERMINAL HAND CRIMPING CRIMPER COMPRESSION TOOL Offered is a USED Kearney Compression Crimper. Description: 5/8" Fixed nose die. 845 compression die. Total length: 26" This item is in good USED working condition. FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed ... morewith eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International customers are responsible for all applicable import duties and fees. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. Return Policy: You may return an item(other than an as is item) within 14 days of delivery for a full refund of the purchase price following our receipt of the returned item in the same condition it was in when sold. We will pay return shipping costs if the reason for the return is an error on our part. Otherwise. The buyer is responsible
|
|
|
Kearney C35 Style Electrical Crimper MD6-8 O & D FREE SHIPPING
The item you are purchasing is a Kearney C35 Style Crimper MD6-8. This item ships as pictured. Free shipping to the lower 48 states only.
|
|
|
kearney die set 86494 3/8" for wh-2 and ph-2 hydraulic crimper
i do believe these are new they were just stored in my cabinet in the garage for some time so they show light surface rust on them- kearney die set for wh-2 and ph-2 hydraulic tools die size 3/8" cat no- 86494 ask other questions you have- please please take in this info. i can only ship mon-wed. i work another full time job and where i list from is an hour from where i live. if you can not accept this. Please do not buy. by not reading this info and leaving low markings on shipping time, you are hurting my feedback score and ratings! i try to do my best and love selling. please do not forget this when you leave your feedback for the shipping time! thanks so much
|
|
|
Kearney Blackburn compression tool OD58 26992 5/8-1 Die BY31
Kearney Blackburn compression tool 26992 5/8-1 Die. Fits Blackburn OD58 Tool. For Other Blackburn OD58 Tool Dies click. For Blackburn Compression Connectors click. Free Shipping! Return Policy:30 day no hassle.
|
|
|
Kearney Hydrulic Crimper
For sale is a Kearney crimper. The crimper is used but works 100% All you need to do is get some dies and you are ready to go. Any questions please contact me. Thanks for looking
|
|
|
KEARNEY ELECTRIC CRIMPING TOOL
Kearney electric crimping tool. Appears to be in good working order. 29" in length& has 2 different sized crimping holes. Don't know much about. The item in the picture is the item that you will receive. Feel free to ask questions. Bid early and often. Good luck. Thank you in advance for your purchase. Payment must be made within 3 days of the auction close date. Item will be shipped with-in days of cleared payment.If payment is not received by this date item will be re- listed. Insurance is at buyers option. Please be aware that I do not have control over the post office. All sales are final. I will accept returns if item is misrepresented on my part. I also want my buyers to be completely satisfied, please contact me with any problems. Again THANK YOU and have a great day! Happy Bidding! Posted with
|
|
|
2 KEARNEY BG 5/8 NOSE DIE COMPRESSION TOOLS ALSO 840 DIE/ K DIE STUBBY TOOL
2 KEARNEY SHORT/ STUBBY BG 5/8 NOSE DIE TOOLS.ONE HAS THE K DIE IN THE BACK AN THE OTHER HAS THE 840 DIE IN THE BACK.THESE ARE MADE FOR HARD TO REACH AND TIGHT PLACES WITH THE SHORTER HANDLES.ONE HAS 7.5 INCH HANDLES AND THE OTHER HAS 6 INCH.PERFECT FOR A UNDERGROUND SPLICE WHERE YOU DONT HAVE MUCH ROOM OR FOR OVERHEAD IN TIGHT QUARTERS.ONE TOOL IS MISSING THE SLIDE ON GRIP BUT WORKS FINE.EMAIL WITH ANY QUESTIONS.THANKS Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14196c0985c-0xfa-
|
|
|
Kearney Crimp Tool With 5/8" Fixed Nose Die & "D" Die & 840 Die POP TOOL
Kearney Crimp Tool.THIS TOOL COMES WITH THE FOLLOWING. ❌ 5/8" = Fixed Nose Die. ❌( D) = Die. ❌( 840) = Die. THIS IS A OLD TOOL BUT IS IN GREAT CONDITION STILL HAS GOOD POP. Posted with
|
|
|
10 KEARNEY BLACKBURN OD58 CRIMPER DIE SET 5/16" 3/8" 1/2" 5/8" 635 747 O D P
YOU ARE BIDDING ON A USED SET OF 10 KEARNEY BLACKBURN OD58 O-TYPE CRIMPER DIES IN CASE. INCLUDES 5/16" 3/8" 2 X 1/2" 5/8" 635, 747, O, D AND P DIE SETS. ALL DIE SETS ARE IN GOOD USABLE CONDITION AND WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-142181d3450-0xfb-
|
|
|
Kearney Linemans Hydraulic Electrical Utility Connector Crimper Crimping Tool
You are bidding on a Used Kearney Linemans Hydraulic Electrical Utility Connector Crimper Crimping Tool. Includes the crimper and a set of 11/16" dies. The crimper is fully functional and in good usable condition. This item will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
"L@@K" 12 Ton Kearney CT10 Heavy Duty 1 1/2" Hydraulic Crimping Tool 'Awesome'
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for bid is a 12 ton CT10 Kearney 1 1/2" Heavy Duty Hydraulic Crimping tool. This tool requires a minimum of 1650 p.s.i. of hydraulic pressure. It comes complete and operating with one pair of dies. It has a built in relief valve to prevent over-crimping. This unit requires no booster or intensifier to operate. It is compatible with the following die application: Kearney PH2 and WH3/ Huskie EP510K AND EP510HK The best thing I feel about this unit is the 360 degree continuous rotation. It has crimping force of 12 ton/ 10.900 kg Flow range is 3-9 gpm/ 11-34 lpm This unit weights 25 lbs. and measures 25" long and 5.25 across 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143653b840e-0xd4-
|
|
|
Kearney Hydraulic Compression Crimping Tool Crimper + Metal Case + 11 Sets Dies
Kearney Hydraulic Hand Crimpers. Comes in Metal Case And 11 Sets of Dies. Dies have some light surface rust. Dies are: 3/8" 5/8- 1 1" 1 1/8- 1 5/16 11/16.572.635.747.781.840 I am selling as is. I have no way to test. I cant see anything wrong with it.
|
|
|
(3)crimpers....(1) Burndy MD6-8 (1) MD6 and (1) Kearney good usable condition
3 crimpers. The winning bidder will receive all 3 crimpers. They are in descent condition and perform like they should. plenty of life left in them. Feel free to ask any questions. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1438aec4829-0x106-
|
|
|
kearney Hydraulic Linesman Hand Crimper - RL0
Click thumbs to Enlarge Any additional photos will be below This kearney Hydraulic Linesman Hand Crimper is used and in about as good of shape as you could expect. Being a used crimper. This crimper has been tested and works well, all features are intact and fully functional, no issues with the crimper that I can find, a great piece available at an excellent price. Auction to include exactly the Kearney Hydraulic hand crimper featured in the pictures only. Have a great day. Auction includes: kearney Hydraulic Linesman Hand Crimper, SKU: 11/26b2-246-136658-as Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address your card ... morewill be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: $5 Per item handling fee. Contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of t
|
|
|
REL-510 Swivel Head Manual Hydraulic 12 Ton Crimping Tool (Kearney Style)
REL-510 Swivel Head Manual Hydraulic 12 Ton Crimping Tool(Kearney Style) Used. No dies included.
|
|
|
Kearney Compression Crimpers with 1 5/16" Dies 31" Long
Kearney Compression Crimpers 1 5/16" Dies 31" Long
|
|
|
KEARNEY COMPRESSION CRIMPER CRIMPING TOOL WITH 840 DIE SET
Normal 0 false false false MicrosoftInternetExplorer4 KEARNEY COMPRESSION CRIMPER CRIMPING TOOL WITH 840 DIE SET USED ITEM. READY TO WORK This was purchased at a recent estate auction. Condition: Used. Open and closes easily… Item comes as shown only Thanks for looking! Comes as shown in the photos only. SHIPPING AND HANDLING Shipping and Handling: Use the calculator on this page to calculate exact shipping to your zip code. International Shippers- Please note the following: Please check for shipping rates before you bid* Import duties. Taxes and charges are NOT included in the item price or shipping charges. These are the buyers responsibility. Please check with your country's customs office to determine what these additional charges will be prior to bidding(these charges are normally collected by the delivering freight or shipping company ... moreor when you pick up) Do not confuse them with additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and Intl government regulations prohibit such behavior. PAYMENT DETAILS I accept PayPal…Other methods of payment like paper money. Contact me directly by email. RETURN POLICY Please see the listing for additional details SHIPPING Shipping will be through UPS. USPS, Fedex, etc(depending on location of buyer, size and weight of package) FEEDBACK Positive feedback will be left once the buyer has received their purchase and the buyer has left feedback of the sales transaction. NONPAYING BIDDERS As per Ebay guidelines and listed rules. QUESTIONS? Feel free to ask me any questions before you bid. I strive to describe and with photos give the buyer enough information to make an informed decision on the auction item. If more detail is needed about the item. About shipping, etc. I will be more than happy to do so. Just send me an email!
|
|
|
Kearney Hydraulic Crimper Crimping Tool With Die and Hose FEB84
Kearney Hydraulic Crimper. with Die and Hydraulic Hose. I have no way of testing so I am selling as is. No Refunds. I gladly combine shipping. I charge regular price shipping for the first item and 1/2 price shipping on each additional item.
|
|
|
2 Cooper Kearney Compression Tools (5/8") With dies Burndy MD
Cooper Kearney Compression Crimp Crimper Crimping Tool. Takes either Kearney style or"W" style dies Comes with a fixed"5/8" nose die and a set of"D" Kearney Style dies. Die retainer pins are in good condition. Fiberglass Handles. Good Used Condition with some chips. Scratches in the fiberglass handles. some rust) This is a nice used compression tool. I looked for the model# but was unable to locate. Any input appreciated
|
|
|
COOPER KEARNEY LINEMAN Wire Cable Crimper Tool Fixed O & D Crimping 08 06
Hello All. You are bidding on a COOPER KEARNEY LINEMAN Wire Cable Crimper Tool Fixed O& D Crimping 08 06. Please look at the photos and Good Luck Bidding!
|
|
|
Kearney Electric Terminal Lug Crimper Crimping Compression Tool C34 26" Long
WELCOME BIDDERS* You are BIDDING on A Kearney Electric Terminal Lug Crimper Crimping Compression Tool C34 20" Fiberglass Handle 26" Length comes as pictured Good Condition 100% FULLY FUNCTIONAL*COMES WITH FREE USPS SHIPPING* BID WORRY FREE! Pictures are ACTUAL Pictures of the item you are BIDDING on! Please feel free to ask any Question and I will respond asap! Buyers: Please remember I have been a member of EBay for some time now and have great scores and am working hard daily to exceed expectations. Please leave Positive feed back on your experience of your purchase and I'll will do the same. Negative feedback is Never necessary! If EVER any discrepancy Feel free to communicate. THIS IS KEY! This Item Will Sell in a AUCTION STYLE SETTING The BIDDING Will Start at a"PENNY" And Go On For( 7) Days*GOOD LUCK BIDDERS*
|
|
|
Huskie HT41KE Kearney 9/16 hydraulic 12 Ton crimper crimping crimp U Style die
We ship to confirmed address only. No PO BOX, NO exceptions! Payment within 5 days of auction end· International buyers are responsible for shipping. Broker and custom fees· Signature is required for delivery· Buyers; we do not rent tools. Please be sure to purchase to own(there will be no return accepted unless DOA) Bid only if you accept these terms This is a used Huskie HT41KE 9/16 die set. Used with 12-14 Ton crimpers such as Burndy. Huskie, Thomas Betts and many others on the market. It is in excellent condition, please see photos, what you see is what you get. Buyers to pay actual shipping, thank you for looking.
|
|
|
KEARNEY COMPRESSION CRIMPER CRIMPING TOOL BU85
Kearney Crimpers Good Used Condition!
|
|
|
KEARNEY COMPRESSION CRIMPER CRIMPING TOOL BU86
Kearney Crimpers with 840 Dies Good Used Condition! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1458fa4a983-0x10a-
|
|
|
Vintage KEARNEY #30049 Wood Handled Large Wire Lug Crimpers Lineman's -0-, 52
KEARNEY Model 30049 Lineman's Crimping Tool These vintage wood handled Lineman's Crimpers have been used but the jaws show little to no signs of wear and they are in very good vintage condition. One of the wooden handle ends has a small piece that has split off(please see photos) but this does not effect the tools performance. One side of the jaws is marked-0- with a 52 directly under it. The other side has a 5/8 near the smaller hole. There is a rubber type insulation where the metal meets the wood handle. BOTH USABLE AND COLLECTABLE PAYMENT Payment is due immediately for all“ Buy it Now” sales and within 2 days of the end of all on- line auctions. The eBay Office Assistant has been set to automatically open an“Unpaid Item” case 2 days after the end of the auction if payment has not been received. If there is any reason you cannot ... morecomply with the above terms. Such as a cash transaction for a local pick up or an unanticipated payment delay, please contact us ASAP and make us aware of your situation. SHIPPING Domestic shipping is FREE. This charge covers both the shipping cost as well as the cost of packaging and materials. The package will ship USPS Priority Mail. USPS Parcel Post. Fed Ex Ground or UPS Ground within 2 business days of receipt of payment. We are happy to offer Consolidated Shipping rates whenever possible. Please contact us and let us know which items you are interested in and what you Zip Code is so we can provide you with the reduced cost and arrange invoicing for the purchase. We welcome International buyers for all items that do not present shipping or customs challenges. We understand that International shipping costs are high and do not add any additional handling charges to International orders. International buyers please review calculated shipping costs prior to ordering. RETURNS We do our best to provide eBay buyers accurate descriptions and photographs and encourage you to ask questions prior to bidding on or purchasing an item. If you are not satisfied with your item after rece
|
|
|
Kearney 062 dieless crimping/compression tool..*Very Nice*
This is a very nice/clean Kearney 062 crimping/compression tool. The nose die is 5/8.please view the pics for this is the exact tool. Thanks.several more available, message me if you're interested.thanks
|
|
|
Kearney Electric Terminal Lug Crimper Crimping Compression Tool 29" Long
this is a very good looking tool it would look good in any truck tool box thanks
|
|
|
Cooper Kearney O-68 Lineman Wire Cable Mechanical Compression Crimper Tool Used
You are bidding on a Used Cooper Kearney O-68 Lineman Wire/Cable Mechanical Compression Crimper Tool. The crimper has fixed O& D die grooves and uses W style crimper dies. The crimper is fully functional and will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
Huskie REC-5510K hydraulic battery crimper Robo die crimp crimping tool Kearney
We ship to confirmed address only. No exceptions! Payment within 5 days of auction end· International buyers are responsible for shipping. Broker and custom fees· Signature is required for delivery· B uyers; we do not rent tools. Please be sure to purchase to own(there will be no return accepted unless DOA) Bid only if you accept these terms Huskie REC-5510K Battery operated hydraulic crimper for Kearney type dies. It is in excellent condition. It comes with case, charger, two batteries and manual. Please see photo of actual item. What you see is what you get. Buyer to pay actual shipping, thank you for looking. Please note that there is a die set available for this crimper. Please see item# 271352197253 The REC-5510K battery powered compression tool is designed to accept Kearney WH-2. PH-2 and WH-3 style dies. Weighing just ... more16.5 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable tray. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work. The REC-5510K was designed from the same hydraulic system as our REC-558U featuring a rapid advance ram to reduce cycle time. It has a full 12-ton capacity and its 1.5 inch jaw opening accepts lugs up to 1033 MCM. Compression head rotates 360° for use in any position. One Hand Operation• Tested Up to 75kV• Rotational Head• Rapid Advance• Ergonomically Balanced• Ergonomic Pistol Grip Handle• Weather Resistant Housing• Audible Bypass when Predetermined Pressure is Achieved• Protective Rubber Boot on“C” Head For Brush Contact• 5 Year Warranty on Tool. Battery& Charger
|
|
|
Kearney Crimper Crimping JU37
Kearney Crimper With Dies#737 29" Long Rusty Please look closely at pictures. Selling as is. I am listing several crimpers and cutters.
|
|
|
Kearney Crimper Crimping JU33
Kearney Crimper 26 1/2" Long Please look closely at pictures. Selling as is. I am listing several crimpers and cutters.
|
|
|
Kearney Crimper Crimping JU31
Kearney Crimper 24" Long Please look closely at pictures. Selling as is. I am listing several crimpers and cutters.
|
|
|
Kearney Crimper Crimping JU30
Kearney Crimper 29" Long Please look closely at pictures. Selling as is. I am listing several crimpers and cutters.
|
|
|
Kearney Crimper Crimping JU29
Kearney Crimper with Dies Dies are#840 29 1/2" Long Please look closely at pictures. Selling as is. I am listing several crimpers and cutters.
|
|
|
Kearney Lineman Compression Crimping Tool JU45
Kearney Compression Tool. 26" Long Please look closely at pictures. Selling as is. I am listing several crimpers and cutters. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146d51584fd-0x10a-
|
|
|
Kearney crimper compression high press removable die 5/8-0 crimp 26295
Check out my other items! Add me to your favorite sellers. I' Save money buying from me! Add me to your favorite sellers list! Click here Welcome to the best deals on the web! Description of item. Kearney crimper compression high press removable die 5/8-0 crimp 26295 Crimper is in great working shape. Unit has been reprinted. Please check compatibility and part numbers before ordering! Please click on the pictures for more details. If you need more pictures email me! Refund will be given if item is returned. Shipping is non refundable. Please use calculator button for shipping costs. Winning bidders must make contact within three(3) business days of auction close. Payment must be received within seven(7) business days or Non-Paying Bidder will be reported. Negative feedback will be posted! Multiple purchases are sometimes eligible for ... moreshipping discounts. Please email me before bidding! Item's can be paid in person too. o be shipped! All items sent out for shipment within 1-2 business days! Shipping International. Canada, Mexico, Alaska and Hawaii please email me before bidding for shipping price. Thank you for looking! Good Luck! Happy bidding! Serious bidders only! This page is © Copyright By Cubbys Bargains 2014. All Rights Reserved
|
|
|
GREENLEE 00949 GUY EHS WIRE CUTTING DIE for Burndy and Kearney crimping heads
Up for sale is a set of Greenlee 12 ton U dies for cutting Cat No. 00949 Can be used in Greenlee or Burndy type 12 Ton"U" die tools Will cleanly cut 5/8" guy wire. EHS, grade 60 rebar, ground rod, soft steel bolts up to 5/8" up to 477 kcmil ACSR
|
|
|
Kearney Crimper Crimping JU38
Kearney Crimper 29" Long Handle is Broke Please look closely at pictures. Selling as is. I am listing several crimpers and cutters. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1472af5ff1a-0x10f-
|
|
|
Kearney Fixed/Insertable Die Type "O" Crimper with 840 Dieset Lineman tool
For sale is a used Kearney Crimper. It has 0-52 engraved near the crimp dies. It is a fixed and insertable die tool and includes an"840" die set. The overall length is 26" and the fiberglass handles look to be about 20" as shown in the photos. The description from the manufacture is as follows: Fixed/Insertable Die Type"O" Tools Almost all distribution connectors can be made with lightweight. Low cost type"O" Tools. Wide connection versatility is accomplished through the placing of individual die inserts close to the fulcrum. A fixed nose die provides extra convenience when installing Serv-ens Connectors and Triplex neutral sleeves. Powerful. Rugged type“O” Tools are engineered around the basic design of the bolt cutter. The jaws are forged steel, heat treated and hardened for high strength. Bolts are ... moremanufactured from heat treated material and are encased in sleeve bearings to greatly reduce wear and subsequent need for future tool adjustment. Type“O” Tools have fiberglass handles. To extend operating flexibility across all connection locations. Various handle configurations are available– straight, bent or lever. Matched Kearney“O” Tool die sets are easily inserted and remain locked securely in place during use. All die sizes are clearly marked on each die. The use of Kearney patented Non-Bow Dies is recommended when installing full tension. Single ACSR sleeves. It is in good working condition with minimal surface rust on the head. The starting price of the auction is the cost of the 840 die set. Not sure of the crimper cost. Please ask any questions prior to bidding! No international shipping! Shipping is fixed at $20 for the lower 48 states only! Good Luck and Happy Bidding!
|
|
|
Kearney 840 crimping/compression dies..Burndy Reliable
These are used. In good condition Kearney style 840 dies. They are priced per set(2 pieces) Thanks
|
|
|
COOPER KEARNEY LINEMAN COMPRESSION TOOL WIRE CABLE CRIMPER W/ INSTERABLE DIES
COOPER KEARNEY LINEMAN WIRE CABLE CRIMPER INSERTABLE DIE"O" TOOL WITH 5 DIES COMPRESSION TOOL This compression tool is made by Cooper Kearney. It is a powerful. Rugged type"O" tool that is engineered around the basic designs of the bolt cutter. The jaws are forged steel, heat treated and hardened for high strength. Bolts are manufactured from heat treated material and are encased in sleeve bearings to greatly reduce wear and the need for future tool adjustment. It comes with five(5) interchangable dies: 1/2" 9/16" 5/8" 0" and 747. CONDITION:My item is in used condition with signs of normal usage. The handles are scratched and scraped on both sides& one handle's grip sleeve is missing. But this does not affect the operation of the tool. One die is broken on the front edge. All of the other dies ... moreare in good working condition. Please look closely at picture number six(6) to view the condit ion of that die and picture number three(3) to view the missing handle grip. Make sure that this item is what you really want because what you see in my pictures is exactly what you will be receiving Please review all photos as they are an important part of the description. Questions are welcomed and answered Mon-Fri 8am-6pm EST. We have family commitments on weekends and evenings so response times may be slower but will be answered. Thanks for your interest in our items. Be sure to Check out my other items as we add new ones daily. Offer or Bid with Confidence. We strive for Customer Satisfaction which is reflected in out Positive Feedback! YOUR SATISFACTION IS OUR PRIORITY! WE OFFER A FULL 14 DAY MONEY BACK GUARANTEE. FEEL FREE TO MESSAGE US WITH ANY QUESTIONS OR PROBLEMS FIRST. WE WILL DO OUR BEST TO MAKE YOU HAPPY AND RESOLVE ANY PROBLEMS OR ISSUES WITH THE ITEM. WE WORK HARD TO GET YOUR POSITIVE FEEDBACK AND HAVE YOU RETURN AS A HAPPY CUSTOMER! About us: Our items are from Auctions.Estate& Liquidation Sales,Business Closeouts,ect. Therefore we do not usually have a history o
|
|
|
Kearney 840 crimping/compression dies..Burndy Reliable Blackburn
Kearney/Blackburn 840 compression crimp Dies.
|
|
|
Kearney Electrical Crimper With Spare Die
Up for auction. This Kearney Electrical Crimper With Spare.840 Die. This tool is used, but in very good working order. it is free from rust, and corrosion. Has fixed 5/8" crimp die, and comes with an.840 spare die.
|
|
|
KEARNEY COMPRESSION CRIMPER CRIMPING TOOL FEB146
Kearney Crimpers 18" Long
|
|
|
COOPER KEARNEY LINEMAN COMPRESSION TOOL CABLE CRIMPER w/INSERTS - 840
UP FOR BID: 1-SET COOPER KEARNEY COMPRESSION CRIMPING TOOL w/ 840 INSERTS& FIBERGLASS HANDLES THIS AUCTION IS FOR THE COOPER KEARNEY INDUSTRIAL COMPRESSION CRIMPER SHOWN IN THE PICTURES ABOVE THESE ARE A SET OF USED CRIMPERS BUT FUNCTIONING PROPERLY. THEY DO HAVE ONE SET INSERTS MOUNTED IN THEM( 840) TEETH ARE GOOD, HINGED BODY WORKS[ERFECTLY& HANDLES ARE CRACK FREE. THEY DO SHOW NORMAL JOBSITE WEAR, BUT ALL IN ALL, GOOD CONDITION! This AUCTION is for the Items shown in the Pictures accompanying this auction only. Only items in pictures! a2ztexas Ø All items listed. Are authentic items and are guaranteed to be as stated in print, shown in provided pictures, 100% as is stated, not DOA. Ø Any questions regarding the item up for bid or any shipping& handling questions regarding the current auction or completed auctions ... moremay be asked here. Ø AUCTIONS ARE FOR USED ITEMS! UNLESS STATED OTHERWISE) ARE DESCRIBED TO THE BEST OF OUR ABILITIES. DO NOT EXPECT A NEW ITEM FOR A USED PRICE. Ø SHIPPING IS PAID FOR BY THE BUYER, on the item won in the auction. Ø PayPal is the only form of payment accepted. If a refund is to be made. It is issued through PayPal the same as payment was received. If a refund is to be made, auction item is to repackaged by the Buyer, shipped back to us and reviewed/inspected before said refund is to be issued, All S&H costs are to be the Buyers responsibilities& non-refundable. Ø Buyers must have a FeedBack rating of 20 or higher in order to participate in the said auctions. Anyone with a lower FeedBack than 20. Bids will be dismissed and the items placed back on the auction block, unless otherwise discussed. Ø a2ztexas uses FedEx as our primary delivery company. So items are shipped SIGNATURE required for delivery. We also can provide delivery using the USPS if requested. Ø We will not ship to a PO BOX as your verified address. As signature proof is required. Physical address required. Ø AUCTIONS concluding on a Friday. Saturday or Sund
|
|
|
KEARNEY HAND CABLE LUG WIRE CRIMPER MECHANICAL TERMINAL HOT STICK HANDLE
THIS AUCTION IS FOR A USED KEARNEY CRIMPERS WITH HOT STICK HANDLES GOOD USABLE CONDITION PLEASE SEE PICTURES FOR OVERALL CONDITION WILL SHIP UPS ONLY OR YOU CAN PICK IT UP IN PERSON.
|
|
|
KEARNEY COMPRESSION TOOL MODEL # EP-510K USED IN GOOD WORKING CONDITION
FOR THIS SALE FROM A POLICE AGENCY EVIDENCE ROOM. THIS GENUINE KEARNEY COMPRESSION TOOL MODEL# EP-510K, THE TOOL IS USED IN GOOD WORKING CONDITION WITH NORMAL SIGNS OF WEAR AND TEAR, THE TOOL COMES WITH THE CARRYING CASE AND SERVICE AND OPERATING INSTRUCTIONS, THE TOOL WAS MANUFACTURED IN 1994 AND ACCORDING TO THE LABEL ON IT WAS TESTED ON 2006, PLEASE MAKE SURE TO LOOK AT THE PICTURES AND ASK ANY QUESTIONS PRIOR TO BUYING THE TOOL, THE SHIPPING WILL BE FOR FREE WITH THE FINAL SALE BUT IN CASE OF A RETURN THE BUYER WILL BE CHARGE WITH 15% RESTOCKING FEE PLUS ALL OF THE SHIPPING AND HANDLING CHARGES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14949e46fc7-0x10a-
|
|
|
KEARNEY LINEMAN COMPRESSION TOOL CABLE CRIMPER with 840 Dies NOV14
Kearney Hand Crimpers with 840 Dies. Good Condition!
|
|
|
KEARNEY HAND HYDRAULIC COMPRESSION CRIMPER CRIMPING BA90
Kearney Hydraulic Crimpers. I have no way of testing these crimpers so I am selling as is. No Refunds. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14aa1d9f8e3-0x116-
|
|
|
Kearney PH remote crimper head w/ hot stick bracket & case *works great*
This is a used Kearney hydraulic remote crimper head. It has been cleaned and tested for leaks and function. And the retaining/set screws for the dies turn properly. It does have the remote bracket for use of hot stick. It also has the storage/carrying case with it. Please view the pics, for this is the actual tool.thanks
|
|
|
HUSKIE ECO-EZL Robo 14.4V Cordless Battery CRIMPER Jaw head Kearney 6-Ton "O"die
PLATFORM TOOLS: Only PayPal Accepted for Payment. No International Shipping. Guaranteed to be accurately described. 14 Day Money-Back Guarantee Return Policy. Guaranteed to work as described. Or money back and WE PAY return shipping. Great. Friendly Customer Service! every customer treated with fairness and respect. HUSKIE 6-Ton Kearney Style(O" die) Crimper. Model ECO-EZL, with ND-K Crimp Head. Condition: Good. Light-normal wear& tear: misc. scuffs. Scrapes, scratches. Please see pictures for exact cosmetic details. Crimper has been tested. Works well and works as it should. All operations function as they should. You will receive the exact item pictured- nothing else included. This item is set to be shipped with Signature Confirmation. Due to its high value. If this is going to be a problem, please let us know immediately after ... moreyour purchase, and we'll get it changed.
|
|
|
Kearney 737 type "O" crimping dies EUC
This is a used set of Kearney type"O" dies that are in excellent condition.index# 737
|
|
|
COOPER KEARNEY 28" WIRE CABLE MECHANICAL COMPRESSION CRIMPER MD6-8 STYLE
28" Kearney crimper with fixed o die in the nose and accepts Burndy W type dies. Well adjusted and ready to work!
|
|
|
KEARNEY TOOLS COOPER CRIMPING TOOL 28 HANDLE TZQ 5/8 CRIMP 04 LINEMAN MECHANICAL
This auction is for a used Kearney Tools Cooper crimping tool. There is several different numbers on the tool including 5/8" And 04 and 11AB. They are in good used condition. There are no previous engravings. The total length is 28" and has fiberglass handles and rubber grips. We only send an invoice after 24 hours of auction end to those items that are unpaid. When you win the item and don't really need an invoice or combined shipping you can pay with Paypal and we will get your item ready for shipping. If you would like a tracking number please let us know. If you want to add insurance let us know also. Thanks for looking at my auctions and have a blessed day.
|
|
|
Kearney Hyrdraulic Compression Cable Crimper B45 w/ "O" Die Set Works Great!
Kearney Hyrdraulic Compression Cable Crimper B45 w/ O" Die Set Works Great! Description: KEARNEY COMPRESSION CABLE CRIMPER#B45 with"O" Die Set Includes Canvas Storage Case This crimper in good used condition. And works great. Buyers- I will drain most of the oil out before shipping, so you will need to add on arrival before use. There are some minor cosmetic blimisses. Please note- This tool was used in my father's construction company during his 30+ years in this line of business. Other than what is described above I can not make any guarantees on the functionality of this tool. These tools that I have listed have been in storage for a least a few years and may or may not need upgrades. Calibration, new seals, etc. All tools are sold as is. I will do my best to answer any and all questions, but please know I am not an ... moreexpert on these. Thanks for looking. And please check out my other auctions for more great deals! Shipping: Please use calculator for all shipping prices. I will package each item securely and ship buyer's choice or UPS ground or USPS Priority mail. Payment: Paypal or credit card by phone(VIsa or MasterCard) Number will be given in the checkout. Must be received within 5 days after end of auction. Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
COOPER KEARNEY WIRE CABLE MECHANICAL COMPRESSION CRIMPER 21" HANDLES
Cooper Kearney Wire Cable Crimper. View pictures for details as that is the best description of what you are purchasing. The tool opens and closes smoothly. Please ask any other questions you may have. Posted with
|
|
|
Kearney Hydraulic Crimper Crimping Tool 1650 PSI with Dies set
Kearney Hydraulic Crimper Crimping Tool 1650 PSI with Dies set this item is used and untested. Seller had no compressor to hook up to. It is in visibly good though well used condition, the set of dies that are in the hard case are a variation of sizes with fractions and/or letters. Please see all photos for more details Please review all photos as they are an important part of the description. Questions are welcomed and answered Mon-Fri 8am-6pm EST. We have family commitments on weekends and evenings so response times may be slower but will be answered. Thanks you for your interest in our items. Be sure to Check out my other items as we add new ones daily. Offer. Bid and Buy with Confidence. We strive for Customer Satisfaction which is reflected in our Positive Feedback! YOUR SATISFACTION IS OUR PRIORITY! WE OFFER A FULL 14 DAY MONEY BACK ... moreGUARANTEE. FEEL FREE TO MESSAGE US WITH ANY QUESTIONS OR PROBLEMS FIRST. WE DO OUR BEST TO MAKE YOU HAPPY AND RESOLVE ANY PROBLEMS OR ISSUES WITH THE ITEM IN A TIMELY MANNER. WE WORK HARD TO GET YOUR POSITIVE FEEDBACK SO THAT YOU RETURN AS A HAPPY REPEAT CUSTOMER! About us: Our items are from Auctions.Estate& Liquidation Sales,Business Closeouts,ect. Therefore we do not usually have a history on these items. We do our best to describe everything we can see or test about an item. Please understand we are not experts on these items. We do our best to correct any mistakes we make so PLEASE MESSAGE US FIRST. WE WILL MAKE IT RIGHT ONE WAY OR ANOTHER! Remember Your Satisfaction is our PRIORITY. Payment: Paypal Payment is due within 3 days unless you message us for an extension. Multiple purchased items are invoiced with in 48 hours with discounted shipping(after boxed.Measured and weighed) for the cheapest shipping possible. Some items cannot be shipped together. But we do our best to keep your shipping cost to a minimum and delivery time short! Shipping costs are based on box size.Weight and distance( zipcode to zipcode) per shipper. Shipping: We do our best to s
|
|
|
kearney type o die set 5/8
this is used and in the box- shows light use- Kearney for type o mechanical tools die size 5/8 I ship mon-fri- ask other questions you have-
|
|
|
KEARNEY COMPRESSION CRIMPING TOOL PRESS 1983 WITH DIES AND METAL CASE
KEARNEY COMPRESSION CRIMPING TOOL PRESS NO. 1983 DIES AND METAL CASE INCLUDED(SEE PICS) Unit will be shipped via UPS Comes as shown in photos( Item Condition: We guarantee that this unit will not be DOA. And offer a 14 day return policy Why buy from us? It is our goal to turn every bidder into a repeat buyer. Unless stated otherwise in the description. All merchandise is GUARANTEED to be as described and to be in working order upon arrival. PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. Please be sure to check out other listings on Ebay. Item will immediately be re-listed if payment is not received within 5 working days. Please contact seller if for any reason payment cannot be made on time. Check out the photos provided. Thank you for looking and Good Luck! Sales Tax: Sales Tax will apply to items ... moresold to buyers who take delivery in California. We will send this unit via freight. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from our location. PAYMENT: Payment is due within 5 working days from end of auction. SHIPPING: Please refer to the shipping instructions on the auction page. TERMS OF SALE: All items are surplus and are sold in an as is condition. We do our best to be as clear and accurate in our descriptions. Sunrise Surplus Inc. does not imply any warranty or guarantee, unless specified. Thank you for your business. CONTACT US: For all questions please give us a call at 818-435-3999 Sunrise Surplus Inc. 10
|
|
|
Burndy Crimper crimping W dies/T.B. Kearney Compression Crimps O-Die Set
Up for sell is a whole set Dies. Burndy Crimper crimping W die Hydraulic 6 TON Crimp Set and Thomas& Betts Ton Kearney Compression Crimps O-Die Set. 1- Set 5/16. 2-Sets of 3/8, 1-Set 9/16, 1-Set.510, 1 Set 737, 1-Set 747, 1ea. not a set of 840, 2-Sets D. 1-Set W-KK KK, 1-Set W-K840, 1ea. not a set of W-BG. One of the D die is broken but in good working order. Top Corner" Please check out all photos. I will consider all reasonable offers. Thanks. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14bbb190674-0x10f-
|
|
|
KEARNEY COMPRESSION CRIMPER CRIMPING TOOL LEV236
Kearney Crimpers 24" Long
|
|
|
COOPER KEARNEY O-68 WIRE CABLE MECHANICAL COMPRESSION CRIMPER MD6-8 STYLE
COOPER KEARNEY O-68 WIRE CABLE MECHANICAL COMPRESSION CRIMPER MD6-8 STYLE THIS ITEM IS USED AND IN good working order Removed from a closed plant. Please see photos for condition of this item 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO Call us@ 248-521-7777 thanks Please allow 4-6 days for shipping and handling. Thank you. If you are not satisfied with your auction item. For any reason, please feel free and return it for a full refund of your purchase price. If you are not happy, we are not happy. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14bde93e04f-0xf8-
|
|