|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$16.23 Shipping Condition: New Location: South Hackensack, United States Hardinge 5C 13/32" Collet Round Grip Item is in Good Condition. This Listing is for(1) Hardinge Collet USED. ShelfP34 Bin246 Box1 041330GB/JB Sales ... moretax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt form is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of your item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e1583746e-0xf9-
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States 6pc New R8 Round Collet 3/32. 5/32, 7/32, 9/32, 11/32 and 13/32" Made of high grade tool steel Hardened& Ground Throughout 7/16-20 Draw bar Thread ... moreThe following size you can pick: R8 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" R8 5/16" 11/32" 3/8" 13/32" 7/16" 15/32" 1/2" R8 17/32" 9/16" 19/32" 5/8" 21/32" 11/16" 23/32" 3/4" 25/32" 13/16" 7/8" 1" If you need more items. Please check my store:
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Due to the wide holding range of each collet, fewer collets and changes are required.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Due to the wide holding range of each collet, fewer collets and changes are required.
Buy It Now
Free Shipping Condition: New Location: Newington, United States Introducing the Techniks ER32 Precision Collet with a collet range of .367-.406” and a collet series of ER32. This high-quality collet is perfect for ... moreCNC, metalworking, and manufacturing applications.With a T.I.R (total indicator reading) of only .0002”, this collet provides precision accuracy for your workholding needs. Whether you’re a professional in the industry or a hobbyist, this collet is a must-have for your tool collection. Get your hands on the Techniks ER32 Precision Collet and take your work to the next level.
Buy It Now
$6.05 Shipping Condition: Used Location: Baldwin, United States Precision 3X collet note the grind marks on bottom tested the draw tube does work they were probably added because wasn't originally threading properly ... moreand just added the cuts to allow the tube to thread
Buy It Now
$5.00 Shipping Condition: New Location: Huntington Beach, United States Each collet laser marked with size. External thread is 1.238"-20 (5C standard). Internal thread is 1.041"-24 (5C standard) allowing for use of an internal ... morestop. Mating surfaces precision ground. Industry leading. 0005" tolerance.
Buy It Now
Free Shipping Condition: New Location: Newington, United States This precision collet from Techniks is an excellent addition to your CNC tool collection. It can hold bits with a collet range of .367-.406" and is part ... moreof the ER25 series. With a T.I.R of .0002", you can be sure that your bits will be held securely and accurately. The collet is brand new and ready to use. Perfect for metalworking and manufacturing, this collet is a must-have for any serious CNC user.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Our ER32 collet chuck kit features a wide range of sizes and 1/16"-13/16" clamping range, suitable for boring, milling, drilling, tapping, engraving, ... moreCNC, spindle machines, and other machining. With a sturdy construction and 0.0006" TIR, it ensures unparalleled precision and durability!
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States ER11/ER16/ER20/ER25/ER32/ER40 Spring Collet Set For CNC Milling Lathe Machine Description: Can be used for clamping drill, milling Tool, straight shank ... moretool. Performance stability, high accuracy Durable and wear-resistant. Large holding force, wide clamping range. Spiral collets are widely used in boring, milling, drilling, tapping, grinding, and engraving, and so on..
Buy It Now
Free Shipping Condition: New Location: United States VEVOR CAT40 Collet Chuck CNC Keyless Drill Chuck 1/2" for HAAS CAT40 APU13. VEVOR 4pcs CAT40 ER16 4" Collet Chuck G2.5 100mm Tool Holder Balanced 20000RPM. ... moreHigh Performance ER32 Spring Collet: All critical collet surfaces are precision ground for an accurate fit.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Precision R8 Round Collet Drawbar Thread 7/16"- 20 Hardened And Ground 1/8"-7/8". Hardened And Ground Throughout. 7/16""-20 Draw Bar Thread. Precision ... moreGround to Close Tolerance.
Buy It Now
Free Shipping Condition: New Location: Newington, United States Introducing the 13/32” ER16 Precision Collet from Techniks, designed for CNC, metalworking, and manufacturing applications. This top-quality collet has ... morea collet range of .367-.406” and belongs to the ER16 collet series. Crafted to provide superior performance, this collet has a precision accuracy of .0002” T.I.R, ensuring precise and accurate clamping of your workpiece. Manufactured from high-quality materials, it is durable and built to last. Perfect for use in workholding and toolholding applications, it is an excellent choice for those seeking a reliable and dependable collet.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Due to the wide holding range of each collet, fewer collets and changes are required.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States All Auctions Start at $3.99! No International shipping at this time. Inventory Number: 12141043507 Manufacturer: Description: 18 MIXED SOUTH BEND/RIVET ... more2A ROUND COLLETS. 1/32 THRU 11/16 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 18, MAY HAVE SOME DUPLICATES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payment& Taxes: Payment MUST be received within 5 business days of auction's end. Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing under 50 pounds. We only accept PAYPAL for our auction items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna for instructions on how to supply us with a tax exempt form via fax or email. The invoice will automatically charge tax and you will need to notify us PRIOR to payment to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. Shipping: We ONLY combine items won within the same calendar week(Monday-Friday) We cannot issue shipping refunds after payment has been made. To receive a combined shipping rate you must contact us for a combined invoice. PRIOR to payment. Payment MUST still be received within 5 business days of auction end. All orders over $100 will require a UPS Delivery Signature Confirmation. Local pick up is available during eBay Department business hours Monday-Friday 8AM- 3PM(holiday hours vary. Please call) Saturday pick up requires 24 hour notice. Items must be paid through PAYPAL prior to pick up. If you need to make pick up arrangements outside of our business hours, please call 440-668-4517. Items MUST be picked up within ONE WEEK of payment. We do not falsify customs declaration values of purchased items for international shipments. Cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any refunds. Buyer pays return shipping. We do
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States BROWN& SHARPE#10 ROUND STUB COLLETS. 1/8" 1/4" 11/32" 13/32" 4 PCS. TOTAL. K021120 This item is in GOOD CONDITION. PAYMENT: Payment ... moreis due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： 7Pcs ER11 Collets(1/16",3/32",1/8",5/32"3/16",7/32"1/4") MODEL: ER11 CONDITION: Brand New MATERIAL: High Grade Carbon Steel Run-Out Tolerance: ... more0.015MM (0.0006") Gripping Range: 1/16"-1/4" 15Pcs ER11 Collets(1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 1/8" ,1/4") MODEL: ER11 Material: Steel. Accuracy: 0.0003" or 5um Gripping Range: 1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5 mm,5 mm,5.5 mm,6 mm,6.5 mm,7mm,1/4",1/8" .
Buy It Now
Free Shipping Condition: New Location: Chino, United States ER11/ER16/ER20/ER25/ER32/ER40 Spring Collet Set For CNC Milling Lathe Machine Specification： 7Pcs ER11 Collets(1/16",3/32",1/8",5/32"3/16",7/32"1/4") ... moreMODEL: ER11 CONDITION: Brand New MATERIAL: High Grade Carbon Steel Run-Out Tolerance: 0.015MM (0.0006") Gripping Range: 1/16"-1/4" 15Pcs ER11 Collets(1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 1/8" ,1/4") MODEL: ER11 Material: Steel..
Buy It Now
Free Shipping Condition: New Location: Thompson, United States NEW TECHNIKS PRECISION ER20 COLLET. PART # 04220-13/32". AVERAGE T.I.R. 0.0002".
Buy It Now
$8.50 Shipping Condition: Used Location: Coloma, United States 13/32" NO INTERNAL THREADS.
Buy It Now
$6.00 Shipping Condition: New Location: Irvine, United States Concentricity is less than. 0004" at face and arbor (TIR). All critical surfaces precision ground. All critical surfaces are precision ground for accurate ... morefit. Run out: 0.0004" / 10 μm. If both quality and cost are your first concern.
Buy It Now
$3.50 Shipping Condition: New Location: Barrington, United States 13/32" Universal Engineering DA Double Angle Taper Collet 55097 04062 NEW 21474 Type Y.
Buy It Now
Free Shipping Condition: Used Location: Saginaw, United States
Buy It Now
$10.00 Shipping Condition: Seller refurbished Location: Hebron, United States These 5C collets were hand selected to be serviceable. R rub on the collet face. P pristine.
Buy It Now
Free Shipping Condition: New Location: Newington, United States Introducing the 13/32” ER20 Precision Collet from Techniks, made to meet your machining needs with top-quality standards. This collet is designed to provide ... morea secure grip on your workpiece with a collet range of .367-.406” and a T.I.R of only .0002”. This collet is part of the ER20 series and is suitable for use in CNC, metalworking, and manufacturing industries. The brand, Techniks, is well-known for its exceptional performance and reliability, making it a must-have for any workshop. Get your hands on this collet today and experience the precision and accuracy that it brings to your work.
Buy It Now
Free Shipping Condition: New Location: Solon, United States This Ultra Precision 13/32" ER32 Spring Collet from Ridiculous Machine Tools is a high-quality tool made in China. This collet features a collet series ... moreof ER32 and has a T.I.R. of 0.0001", ensuring precision and accuracy.
Buy It Now
$4.19 Shipping Condition: Used Location: West Greenwich, United States The functional part of the collets are fine. We used these collets for years in my bridgeports and they did their job well (- Various Sizes Available, ... moreMultiple Quantities Available On All Sizes. They "snap" into the acra grip nut # 9400002 properly and that's whats important here. ).
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 11pcs ER20 3-13mm": Model: ER20. 8pcs ER16 3-10mm Model: ER16. 12Pcs ER16 1/32"-3/8" 14pcs ER25 3-16mm 14Pcs ER20 1/16"-1/2" Model: ER20. Model: ER25.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Precision Collet.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-148e9ca1872-0x116-
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Precision Collet
Buy It Now
$3.00 Shipping Condition: New – Open box Location: Thompson, United States 5C ROUND COLLETS. EXTERNAL and INTERNAL THREAD.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Diameter(Inch)13/32 OAL(Inch)4-1/4 Standard taper: 0005" per 1" Sizes under 1" are. 0005"undersize on smaller end Sizes 1-1/16" ... moreto 3" are. 001"undersized on smaller end Made of tool steel hardened and ground To combine shipping. Please purchase all items needed without paying and email us when you are done. We will send you an invoice with combined shipping charges. One year warranty Allow 1-2 business days for the shipping process. Why should you buy from us? We exceed Ebay's standards for quality and service. We are an Ebay Star Seller and have over 10.000 We are an Ebay Star Seller and have over 10.000 unbiased positive feedback from unique Ebay buyers. PayPal is preferred for immediate shipping Online Payment, We also accept major credit cards!
Buy It Now
Free Shipping Condition: New Location: Solon, United States Get your hands on this superior quality 13/32" spring collet from Ridiculous Machine Tools. With an impressive 0.0003 T.I.R., These collets are made from ... moreCase Hardened Spring Steel for excellent precision and longevity of use.
Buy It Now
$5.00 Shipping Condition: New Location: Mentor, United States
Buy It Now
$10.40 Shipping Condition: New Location: Chino, United States AIR, POWER & HAND TOOLS. Get It Quick! Internally and externally threaded. Hardened and precision ground. Made of high grade tool steel.
Buy It Now
$3.00 Shipping Condition: New Location: Saint Louis, United States We are happy to help.
Buy It Now
Free Shipping Condition: New Location: China Application: For CNC milling Lathe Tool & Work holding Engraving machine. Gripping Range:1 mm to 25 mm.
Buy It Now
Free Shipping Condition: New Location: Thompson, United States NEW TECHNIKS PRECISION ER32 COLLET. PART # 04232-13/32". AVERAGE T.I.R. 0.0002".
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States DESCRIPTION: 100TG COLLET 13/32" USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS ... moreWe try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing A
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States TG150 13/32" COLLET
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States 7/16" - 20 Draw Bar Thread. Precision Ground To Close Tolerance. Hardened And Ground Throughout.
Buy It Now
Free Shipping Condition: New Location: Solon, United States This tap collet is made by Ridiculous Machine Tools and is designed for use with ER32 collet series. This tap collet is perfect for those looking for ... morequality tools at an affordable price, as it is made in China and is part of the "Buy More, Save More" promotion.
Buy It Now
$5.95 Shipping Condition: New Location: Cadiz, United States (1 pc New).
Buy It Now
Free Shipping Condition: Used Location: Orrville, United States Welcome Up for auction is a Hardinge Hex collet marked Hardinge 5C 9/32. It is just over 3 1/4" long ideal. For Machining, the hole is 6 sided. It ... moreis in good condition. Bid with confidence I offer a no questions asked return policy. Thanks for Looking!
Buy It Now
Free Shipping Condition: Used Location: Las Vegas, United States
Buy It Now
Free Shipping Condition: Used Location: Las Vegas, United States 13/32 5C Round Collet.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -7Pcs ER11 Collets(1/16",3/32",1/8",5/32"3/16",7/32"1/4") Model : ER11 Material: High Grade Carbon Steel Run-Out Tolerance: 0.015MM (0.0006") ... moreGripping Range: 1/16"-1/4" -15Pcs ER11 Collets(1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 1/8" ,1/4") Model: ER11 Material: Steel. Accuracy: 0.0003" Or 5um Gripping Range: 1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5 mm,5 mm,5.5 mm,6 mm,6.5 mm,7mm,1/4",1/8" .
Buy It Now
$8.25 Shipping Condition: New Location: Thompson, United States NEW TECHNIKS DOUBLE ANGLE DA180 COLLET. PART # 01618-13/32.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： 29PCS R8 Collet 29 Piece set includes 1/32-25/32" × 1/32", 27/32 and 1" collets. (1、1/2、1/4、1/8、1/16、1/32、3/4、3/8、3/16、3/32、5/8、5/16、5/32、7/16、7/32、9/16、9/32、11/16、11/32、13/32、15/32、17/32、19/32、21/32、23/32、25/32、27/32、29/32、31/32） ... moreMade of high grade tool steel. Hardened and precision ground. Condition: New Threaded internally: 7/16"-20 Guaranteed T.I.R. 0.0005" (or better) 23PCS R8 Collet Made of high grade tool steel Hardened and precision ground Threaded internally 7/16"-20 Guaranteed T.I.R. 0.0005" (or better).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Compatible Devices: Lathe Material: Alloy Steel Included Components: 1/16inch to 13/16inch (2mm-20mm) Type: ER32 Collet Size: 12 PCS By ... more16th: 1/8, 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"; 13 PCS By 32nd: 1/16'', 3/32'', 5/32'', 9/32'', 11/32'', 13/32'', 15/32'', 17/32'', 19/32'', 21/32'', 23/32'', 25/32'', 13/16'' Length: 19 cm (8 inch) Width: 19 cm (8 inch) Height: 7 cm (3 inch) Gross weight: 4 kg (9 lbs) Color: Silver Quantity: 25 Feature:.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Note: The Collet pictured may not be the exact Collet that you will receive. Round Collet.
Buy It Now
Free Shipping Condition: New Location: Schaumburg, United States Fit al l R8,mor se tapper, CAT BT CNC ER32 chuck or holder. Use with any standard ER collet chucks for coolant-thru tool applications. 20 PC Set:From ... more2mm-20mm increase by 1mm. 2, 2.5 ,3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20mm.
Buy It Now
$6.05 Shipping Condition: Used Location: Elverson, United States FREE SHIPPING ON THIS! Here's a VERY CLEAN Royal 13/32" 3AT Collet Atlas Craftsman South Bend Logan Lathe Mill. This came from a private owner ... moreand if this was ever used it was only once or twice. Excellent condition. Please look at the pictures also as they are part of the item description also.
Buy It Now
$8.60 Shipping Condition: Used Location: Littleton, United States 13/32" 5C Round Collet External Threads Only, Forst Bros. Chicago, USA Pre-Owned We combine shipping Free returns
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. Collet Range : NONE. DA180 PRECISION 13/32 IN. We do not require a minimum order-we'll get you what you need, when you need it! Need a part?. ... moreWe use our buying power to get the best possible cost and we pass the savings on to you!
Buy It Now
$4.00 Shipping Condition: Used Location: Fairfield, United States LISTING IS FOR A USED DOUBLE TAPER COLLET BRAND: UNIVERSAL ENGINEERING STYLE: DOUBLE TAPER SERIES: Y SIZE: 13/32" CONDITION: GOOD USED Normal 0 PLEASE ... moreCAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8331
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Collet Pads. Collet Range : NONE. DA100 PRECISION 13/32 IN. We do not require a minimum order-we'll get you what you need, when you need it! Need a part?. ... moreWe use our buying power to get the best possible cost and we pass the savings on to you!
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Due to the wide holding range of each collet, fewer collets and changes are required.
Buy It Now
$15.20 Shipping Condition: Used Location: Robertsdale, United States 13/32" ER-40 PRECISION SPRING COLLET $15.99 13/32" ER-40 COLLET, Major Diameter: 1.620" Overall Length: 1.810" Made of high grade ... moretool steel, Hardened and precision ground, We also have following sets: 9pc Set ER-11 1/32- 9/32" 10pc Set ER-16 1/32-3/8" 12pc Set ER-20 1/16- 1/2" 15pc Set ER-25 1/16- 5/8" 18pc Set ER-32 3/32- 3/4" 24pc Set ER-40 1/8-1" If you need more items. Please check my store:
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Compatible Devices: Lathe Material: Alloy Steel Included Components: 1/16inch to 13/16inch (2mm-20mm) Type: ER32 Collet Size: 12 PCS By 16th: ... more1/8, 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"; 13 PCS By 32nd: 1/16'', 3/32'', 5/32'', 9/32'', 11/32'', 13/32'', 15/32'', 17/32'', 19/32'', 21/32'', 23/32'', 25/32'', 13/16'' Length: 19 cm (8 inch) Width: 19 cm (8 inch) Height: 7 cm (3 inch) Gross weight: 4 kg (9 lbs) Color: Silver Quantity: 25 Description：.
|
|
|
|
COLLET DA100 13/32" #7958
DESCRIPTION: DA100 COLLET 13/32" USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best of our ability. We have experience in the machining industry but do not know everything. Please let us know if you have any questions. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving ... moreitem. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Hardinge 4C collet set, 1/16" - 3/4" by 64ths, missing 21/64" and 13/32" (43)
Here is a set of(43) Hardinge 4C collets. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
|
|
|
COLLET TG150 1 13/32" SINGLE ANGLE TOOLHOLDER COLLET #7212
DESCRIPTION: TG150 SINGLE ANGLE COLLET 1 13/32" USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best of our ability. Although we have experience in the tooling industry. We don't know everything. If a mistake is made on one of our listings, it is unintentional. No fraud or misrepresentation is ever intended. We want you to be happy with the item you get. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped within 1 business day unless the item has to be crated and trucked. We need 3 days for large items. Shipping charges are ... morethe responsibility of the buyer. 3: We do offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 4: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 5: When we say it is NEW; It will be never used or old stock. 6 Concerning calibration of items; no items are calibrated unless otherwise noted. 7: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your
|
|
|
COLLET DA100 13/32" DOUBLE ANGLE TOOLHOLDING COLLET ERICKSON 100DA0406 #7407
DESCRIPTION: DA100 COLLET 13/32" ERICKSON USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition ... moreand we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay
|
|
|
Last USED HARDINGE 6L COLLET 13/32" 6-L .4062"
LISTING IS FOR A USED 6L COLLET BRAND- HARDINGE STYLE- 6L SIZE- 13/32" CONDITION- GOOD USED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL ... more800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8331
|
|
|
Kennametal Double Angle Collet 500DA1406 1-13/32" Used
Kennametal Double Angle Collet 500DA1406 1-13/32" Condition: NEW. In box NEW. No box NEW. Old inventory XX USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! ... moreWE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certified funds only. Returns Warranty Information:
|
|
|
Erickson 180DAC0406 180DA0406 0.40625 13/32" Coolant Style Double Angle Collet
Erickson 180DAC0406 180DA0406 0.40625 13/32" Coolant Style Double Angle Collet SPECIFICATION Bullseye Catalog# 31425 Weight: 3 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect ... morean item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO
|
|
|
Erickson 180DA0406 0.4060" 13/32" Bonded Double Angle Collet
Erickson 180DA0406 0.4060" 13/32" Bonded Double Angle Collet SPECIFICATION Bullseye Catalog# 31421 Weight: 4 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. ... moreINDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click AD
|
|
|
Lot 10 Pieces 2J Collet 13/32" - 1-5/16"
Lot 10 Pieces Use 2J Collet 13/32" to 1-5/16" Very good condition. Only 13/32" 25/32" 1-5/16 is the worse as show on picture. 1- 13/32" 1- 17/32" 1- 23/32" 1- 25/32" 2- 15/16" 1- 1-1/8" 1- 1-5/32" 1- 1-1/4" 1- 1-5/16" What you see is the one you will receive. Ship Priority mail m edium flat rate box signature confirm $14.75 Inclu de. We Ship US 48 State Only.
|
|
|
COLLET #10 BROWN & SHARPE 13/32" ROUND FOR AUTOMATIC & SCREW MACHINE #8244
DESCRIPTION: 10 COLLET BROWN& SHARPE 13/32" ROUND WITH COLLET STOP FOR AUTOMATICS& SCREW MACHINES USED BUT APPEARS TO BE IN GOOD SHAPE. WE OFFER COMBINED SHIPPING SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. We offer a money back refund on the purchase price if the item is not as described. The item must be received back in its original condition and we must be notified through eBay messages within 14 days of receiving item. Shipping fees are non-refundable. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or ... moreimplied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
100TG 13/32" COLLET TG 100 #7245
DESCRIPTION: 100TG COLLET 13/32" USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item must be received back in its original condition and we must ... morebe notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing A
|
|
|
Hardinge S22 Collet Pad 13/32" Round Serrated (my-ID-3F3)
I combine shipping so shop for more in my Store and save. For my convenience I ship mostly flat rate boxes but if you think you can save by using another option let me know at time of purchase and I will do it as long as its within postal guidelines. If you have purchased and paid for multiple auctions and more shipping was paid for then I need to get your items to you I will issue a refund for any overage. Thanks for looking and Have a good day.
|
|
|
1-13/32" Milling Machine Collet
1-13/32" Milling Machine Collet Quantity Available: 7 Shipping Weight: 1 lbs. AEA164 4.3.A L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-
|
|
|
ORIGINAL HARDINGE 7-42 13/32 COLLET LATHE MILLING MACHINIST TOOL
Original Hardinge collet. Marked HARDINGE 7-42 13/32. Threads and keyway are in good order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL RSB 13/32" #3 3 3C COLLET TOOL 4 SOUTH BEND 9" METAL LATHE
Original RSB Royal South Bend 13/32" 3 3C collet for use with a South Bend 9" lathe. Threads and keyway are in fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Kennametal 13/32" TG100 Collet, 100TG, 100TG0406, Used, Warranty
SquareTrade © AP6.0 Title: Kennametal 13/32" TG100 Collet. 100TG, 100TG0406, Used Description: Our Internal Stock# K8-26(8-8-13 dale) You are buying a Kennametal 13/32" TG100 Collet. 100TG, 100TG0406, Used 100TG Collet 100TG0406. 13/32" Capacity This item was taken directly from working service in good working condition. Full 30 day return privilege if found defective(freight prepaid by buyer both directions) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping based on location. Please use shipping calculator to determine shipping cost to your destination. Buyer responsible for ALL shipping fees incurred. We ship Worldwide! Make checks payable to: First Choice Industrial Services. LLC 430 Cummings St NW Suite G Grand Rapids. MI 49534 Phone: 616-453-3370 Return Policy: Full 30 day return ... moreprivilege. Freight is to be pre-paid. Unless item it marked“SOLD AS IS” Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. Let us know, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Powered by The free listing tool. List your items fast and easy and manage your active items. On Apr-09-12 at 18:38:21 PDT. Seller added the following information:
|
|
|
8 HARDINGE 5C COLLET LOT, 3/16",1/4",9/32",13/64",15/64"
Inventory Number: 08130010002 Manufacturer: Description: 8 HARDINGE 5C COLLET LOT. 3/16"1/4"9/32"13/64"15/64" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: 3/16"1/4"9/32"13/64"15/64" SOME SHELF WEAR SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time ... moreof invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of som
|
|
|
Schaublin 161/420 EX ESX/ER Collet Holder Collet 25/64 5/32 # 13 1/4 11/64 5/8
Up for AUCTION is the following item 1- LOT Schaublin 161/420 EX/ESX/ER Collet Chuck with 6 Schaublin Collets 25/64/ 5/32/ 13/ 1/4" 11/64/ 5/8. I have been told these collets are not suposed to be used witht this Collet Holders NUT so nut My need to be replaced if you want these collets to work in this chuckc. Item is in excellent condition. Machinist Tool. In good working order unless otherwise noted. I'm currently listing over 100 Machinist Tools& Will be listing many others in the next couple weeks. Will Call is available on these items. Please Email me any questions you have I will answer you ASAP! Powered by
|
|
|
UNIVERSAL XZ SERIES COLLET - 13/32"
UNIVERSAL XZ SERIES COLLET- 13/32" You are buying a used but good collet. This is an universal XZ series collet. And it holds a 13/32' tool. This is a stock photo. All my collets have been cleaned and inspected. Ship up to 5 collets for the same price! FREE SHIPPING ON 6 OR MORE COLLETS Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy ... morewith your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING• We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
UNIVERSAL XZ SERIES COLLET - 1 & 13/32"
UNIVERSAL XZ SERIES COLLET- 1& 13/32" You are buying a used but good collet. This is an universal XZ series collet. And it holds a 1& 13/32' tool. This is a stock photo. All my collets have been cleaned and inspected. Ship up to 5 collets for the same price! FREE SHIPPING ON 6 OR MORE COLLETS Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If ... moreyou are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING• We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
UNIVERSAL ZZ SERIES COLLET - 13/32"
UNIVERSAL ZZ SERIES COLLET- 13/32" You are buying a used but good collet. This is an universal ZZ series collet. And it holds a 13/32' tool. This is a stock photo. All my collets have been cleaned and inspected. Ship up to 6 collets for the same price! FREE SHIPPING ON 7 OR MORE COLLETS Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy ... morewith your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING• We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ER32 Mill Collet Set 13 Pcs ER 32 + Syic in Hard Case - Machinist Tool Sets
ER32 Collet Set 13 Pcs Rego-Fix + Syic in Hard Case- Machinist Tool Sets This set appears to be in very good pre-owned condition. There are 18 pieces total seated in a hard case. There is no brand or model number on this case however some of the tools themselves have numbers. Please see the full description below for further information on these. Included with markings are: SYIC ER32 16-15 SYIC ER32 6-5 SYIC ER32 12-11 32 3/16#1- unmarked ER32 13/32" SYIC ER32 4-3 SYIC ER32 17-16 SYIC ER32 15-14#2 unmarked(looks brand new) 32 9/16- Marked on the side only#3 unmarked(looks used) SYIC ER32 3-2 SYIC ER32 19-18 32 11/16 ER32 21/32 SYIC ER32 16/17 Please contact us anytime. You can bid with confidence as I am very trustworthy and take great pride in my eBay presence! With ISALESUSA you are GUARANTEED: Good communications Smooth transactions ... moreSpeedy delivery FLAT RATE SHIPPING COSTS ARE FOR THE 48 CONTINENTAL STATES BUYERS LOCATED IN HI. AK or US TERRITORY PLEASE CONTACT US FOR A SHIPPING QUOTE WE SHIP EVERY DAY! ~ Monday- Friday*Any Special Shipping Requests Must Be Made Through EBay! MICHIGAN Residents will be charged MI State Tax. We Cannot Reimburse Return Shipping Costs. Thank you for looking at my listing and good luck bidding! GOD BLESS YOU AND THIS GREAT COUNTRY OF OURS! View My Other Items For Sale
|
|
|
5C COLLET 13/32" ROUND COLLET WITH ID THREADS FOR A COLLET STOP #6074
5C COLLET 13/32" ROUND WITH ID THREADS FOR A COLLET STOP WEIGHT BEFORE PACKING: 10 OUNCES Collet may have engravings USED BUT APPEARS TO BE IN GREAT SHAPE
|
|
|
Erickson 13/32" Diameter DA100 Collet
Erickson 13/32" Diameter DA100 Collet All in Very Good to Excellent Condition No Spun or Sprung Collets Pics are of a Sample of the Collets Questions? Call Robert at 607-259-5615 or email I will combine shipping for multip le purchases NU1-D10
|
|
|
SYIC & Other Brand Spring Collet ER 32 13 piece Lot Various Sizes & Condition
1 SYIC ER32 4-3 2 SYIC ER32 13-12 3 SYIC ER32 12-11 4 SYIC ER32 11-10 5 SYIC ER32 10-9 6 SR 32 13.0 7 SR 32 11.0 8 SR 32 5.0 9 Unknown 10 15-14 11 13-12 12 8-7 13 13-12 1/2"
|
|
|
Hardinge 5C Collet - Size 13/32 -- Internal & External Threads
Hardinge 5C Collet- Size 13/32. From a working machine shop at which the owner retired and closed the shop. Please check my other auctions for more from this shop. Shipping to the USA Only Shipping will be combined for multiple purchases. PLEASE WAIT FOR AN INVOICE WITH COMBINED SHIPPING IF YOU BUY MULTIPLE ITEMS BEFORE PAYING. THANKS. New York State residents will be charged sales tax. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL PRECISION 13/32" 3AT COLLET 4 LOGAN 9 10 ATLAS 10 CRAFTSMAN 12 LATHE
Original Precision 13/32" 3AT collet for use with Atlas 10" Craftsman 12" Logan 9" and 10" lathes. Stamped PRECISION 3AT 13/32. Threads and keyway are in fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED UNIVERSAL ENGINEERING 13/32" DOUBLE TAPER SERIES "Y" COLLET .4062"
LISTING IS FOR A USED DOUBLE TAPER COLLET BRAND: UNIVERSAL ENGINEERING STYLE: DOUBLE TAPER SERIES: Y SIZE: 13/32" CONDITION: GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER ... moreCREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.8331
|
|
|
LOT OF 3 DA180 COLLET EXTENSIONS W/ ERICKSON COLLETS SIZE 3/8", 7/32" & 13/32"
Lot of 3 DA180 Collet Extensions w/ Erickson DA180 Collets Lot Includes: Pair of 1" x 1-1/8" Length Straight Shank Collet Extensions 1-1/2" x 3-3/8" Straight Shank Collet Extension Erickson DA180 Collet Sizes Include: 3/8" 7/32" 13/32" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping ... morerefunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
UNIVERSAL ZX SERIES COLLET - 13/32 "
UNIVERSAL ZX SERIES COLLET- 13/32" You are buying a used but good collet. This is an universal ZX series collet. And it holds a 13/32' tool. This is a stock photo. All my collets have been cleaned and inspected. Ship up to 5 collets for the same price! FREE SHIPPING ON 6 OR MORE COLLETS. Buy with confidence knowing that we inspect. Clean and test(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. ... moreWe will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING We don't up- price our shipping and we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. For UPS. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us before leaving fe
|
|
|
HARDINGE 3J 13/32" COLLET WITH INTERNAL THREADS
HARDINGE 3J 13/32" COLLET WITH INTERNAL THREADS
|
|
|
Cincinnati Series C Collet Set 13/32 to 1" by 32nds - 1" to 1-1/4" by 1/16nds.
Used- Good Condition- Cincinnati Series C Collet Set 13/32 to 1" by 32nds- 1" to 1-1/4" by 1/16nds. Does not have 7/16" or 29/32" 22 collets total. Does not include wooden base or series A collets shown in photo. 1527 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LYNDEX 16C 13/32 DIA COLLET GREAT COND ALSO HAVE HARDINGE BRAND LISTED LOT C7291
LOT C7291 FREE SHIPPING USA WE ARE OFFERING A LYNDEX 16C 13/32" DIA COLLET WE ALSO HAVE MORE LISTED THIS ITEM IS IN GREAT CONDITION YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 PLEASE CHECK OUT OUR AND ADD US TO YOUR.
|
|
|
3/4" SERIES ACURA FLEX COLLET - 13/32 "
3/4" SERIES ACURA FLEX COLLET- 13/32" You are buying a used but good collet. This is an Acura Flex collet. It is the 3/4" series and it holds a 13/32' tool. This is a stock photo. All my collets have been cleaned and inspected. Ship up to 6 collets for the same price! FREE SHIPPING ON 7 OR MORE COLLETS Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving ... moreitem(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING• We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-145103f9239-0x10e-
|
|
|
1 & 3/8 " SERIES ACURA FLEX COLLET - 13/32 "
1& 3/8" SERIES ACURA FLEX COLLET- 13/32" You are buying a used but good collet. This is an Acura Flex collet. It is the 1& 3/8" series and it holds a 13/32' tool. This is a stock photo. All my collets have been cleaned and inspected. Ship up to 3 collets for the same price! FREE SHIPPING ON 4 OR MORE COLLETS Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days ... moreof receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING• We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED UNIVERSAL ENG. ACURA FLEX SPRING COLLET AF-175 13/32" .4062"
LISTING IS FOR A USED ACURA FLEX COLLET UNIVERSAL ENGINEERING PART# AF-175 SIZE- 13/32" COLLET CAPACITY SERIES- 1" CONDITION- GOOD USED A FEW NICKS AND DINGS NEAR HOLE Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, ... moreVISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLE
|
|
|
MINT KENNAMETAL 180 DA COLLET 13/32" 633
YOU ARE BIDDING ON ONE MINT KENNAMETAL 180 DA COLLET 13/32" DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EAGLE ROCK TYPE 5C EXPANDING COLLET 51/64" TO 13/32"
Eagle Rock Type 5C Expanding Collet 3 Steps Range: 51/64" to 13/32" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
UNIVERSAL ENGINEERING 13/32" DIA. COLLET 1" SERIES ACURA FLEX COLLET LOT C7379
LOT C7379 WE ARE OFFERING A UNIVERSAL ENGINEERING 13/32" DIAMETER 1" SERIES ACURA FLEX COLLET THIS IS A STOCK PHOTO. WE ALSO HAVE OTHER STYLES OF THESE COLLETS THAT WE WILL BE LISTING. ALL OF OUR COLLETS HAVE BEEN CLEANED AND VISUALLY INSPECTED CLICK LINK BELOW TO Visit My eBay Store! ANY QUESTIONS PLEASE CALL 937-320-2298 CLICK LINK BELOW TO PUT US ON YOUR.
|
|
|
HARDINGE 5C INTERNAL THREADS COLLET 13/32 (REF # 1A)
HARDINGE 5C INTERNAL THREADS COLLET 13/32 NOTE: WE ALWAYS COMBINED SHIPPING WHEN POSSIBLE! CALL 781-440-0983 FOR MORE INFORMATION.
|
|
|
Hardinge 5C Square Collet 13/32 w/ Internal Threads #10010039004062
Hardinge 5C Square Collet 13/32 w/ Internal Threads#10010039004062 Pictures are of the actual item Used but in very good condition For more related info New Cost $95.75
|
|
|
Hardinge 4NS collet 13/32
Comes as shown.Will combine shipping.Has a small ground spot in face.
|
|
|
13/32 VAN NORMAN STYLE C COLLET SAME AS HARDGINE 5V COLLET
HERE WE HAVE A USED 13/32 VAN NORMAN STYLE C COLLET IN GOOD CONDITION. WE WILL COMBINED SHIPPING! PLEASE SEE OUR OTHER LISTING FOR MORE COLLETS. See other items in our e-Bay store. WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE. FOR SHIPPING QUOTES CALL TINA@ 727-362-8318. ALL OTHER QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, along with the shipping service provider ... morefor the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 48 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! On Sep-19-14 at 13:15:03 PDT. Seller added the following information:
|
|
|
#109 USED 13/32 ZAGAR COLLET FOR LATHE GRINDER MILL INDEX HEAD
This is a nice used Zagar brand 5c collet size 13/32. The inside bore is in good shape. The keyway and threads are also in good shape. I am listing a large amount of collets. So be sure to check out my other items. If you buy multiple collets from me, shipping will be $5.50 for the first, $.50 for each additional. If you need a specific size that you do not see in my items, please ask as it will take me a while to get all of these collets listed. My item number 109
|
|
|
ORIGINAL SUTTON 13/32" 3AT COLLET 4 LOGAN 9 10 ATLAS 10 CRAFTSMAN 12 LATHE
Original Sutton 13/32" 3AT collet for use with Atlas 10" Craftsman 12" Logan 9" and 10" lathes. Stamped SUTTON 13/32 3AT. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hardinge 5C Collet Lot of 4 Round With Internal Threads 13/64 9/32 9/16 5/8
Up for sale is one lot of 4 used sold as pictured in working order Hardinge 5C Collets with internal threads. Sizes are 13/64. 9/32, 9/16ths and 5/8. See pictures for details. Shipping is FREE within the Continental USA not including Alaska, Mexico, Canada or any out of country shipments. Extra shipping charges apply. Call or email with any questions at 8472175546. A 14 day inspection period is granted minus a 12.00 return shipping charge if not 100% satisfied. Note-I have about 100 of these so advise if there is anything that you are looking for.
|
|
|
HARDINGE STYLE 3H COLLET 13/32" DIAMETER - USED - GOOD CONDITION
This auction is for a used Hardinge 3H collet as described in the title of the listing. It may have some slight surface rust but it is in good used condition. All shipping is by USPS small flate rate box. Shipping to US addresses is a flat rate of $5.50. Use the shipping calculator for all international addresses. Unless otherwise noted. I will combine shipping for any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. When you are done shopping. Commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win auctions for multiple items. Ask for an invoice rather than pay right away. I will adjust the shipping charges and send out an invoice. See my listings for: Collectors coins; marine& ... moreoutboard motor parts and manuals; Sliverplate flatware; Hardinge machine shop tooling. Other machine shop tooling, cables for computer printers& keyboards and other items. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DA 180 Collet 13/32" ERICKSON Marked 5603CE6
DA 180 Collet 13/32" ERICKSON Marked 5603CE6 Very good condition. Looks like it was never used You get it just as you see in the pictures Posted with
|
|
|
Hardinge 2J 13/32" Collet
Hardinge 2J 13/32" Collet.Good condition
|
|
|
PRECISION 5C 13/32" ROUND COLLET FOR MILL - LATHE - MACHINIST
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! NEED A SPECIFIC ITEM& YOU CAN'T FIND IT ANYWHERE. WE HAVE IT! CALL US@ 909.544.8882 ASK FOR BRANDON! The Item You Are Bidding On Is a Collet In GREAT. Working Condition. Features: ALL ITEMS FEATURE A NO HASSLE RETURN POLICY. PLEASE READ FULL DESCRIPTION FOR ALL ITEM DETAILS! Item Specifications: Capacities: 13/32" Types: 5C with internal thread. Item Comes Exactly as Shown in Pictures. If You Want To Arrange Shipping Please Contact Us For A Quote. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14b3928a3b4-0x115-
|
|
|
S&M TSD20 Swiss Collet size 13/32" Round .406 CNC (Lot #583)
S&M TSD20 Swiss Collet size 13/32" Round.406 CNC(Lot#583) This is a Swiss Round Guide Bushing Collet that is used and in good condition. The collet illustrated may not be the actual collet in this sale. You may be interested in. SHIPPING AND HANDLING· We combine items so you can buy more items and save $$$$! USPS is our primary shipper; Freight. UPS, or other carriers as indicated in our listings. Shipping is never refundable. We ship most items by the next business day after payment is received. Check the listing for the specific handling time details of the item you are considering. Items for local pickup must be claimed within 10 days. Payment· PayPal or our own credit card processing. See listing for details. All payments must be made within 3 days of receipt of invoice. Ohio Sales Tax· Any items picked up locally ... moreor shipped to an Ohio address are subject to 7.00% sales tax. If you are exempt. You will need to supply us with an Ohio Certificate of Exemption. Customer Service. Returns, and Refunds· Problem? Please give us the opportunity to fix it. We will do our best to make it right. No returns on electrical parts. Returns can be made with prior authorization within 14 days. Unless the listing specifies“No Returns” Returned items must be in unused condition and in the original box. Buyer pays return shipping. Refunds are made through PayPal. Contact Us· Use the“Ask the Seller a Question” button. Powered by SixBit's eCommerce Solution
|
|
|
UNIVERSAL ENGINEERING 1-13/32" DIAMETER XZ SERIES COLLET 1-13/32" LOT C8357
LOT C8357 WE ARE OFFERING A UNIVERSAL ENGINEERING 1-13/32" DIAMETER XZ SERIES COLLET THIS IS A STOCK PHOTO. WE ALSO HAVE OTHER STYLES OF THESE COLLETS THAT WE WILL BE LISTING. ALL OF OUR COLLETS HAVE BEEN CLEANED AND VISUALLY INSPECTED CLICK LINK BELOW TO Visit My eBay Store! ANY QUESTIONS PLEASE CALL 937-320-2298 CLICK LINK BELOW TO PUT US ON YOUR.
|
|
|
Hardinge 9B B&S (Brown & Sharpe) #9 Taper Round Collet 13/32 Inch
BRAND: Hardinge, Made of high grade steel Hardened Precison ground to close tolerance B&S Brown& Sharpe#9 taper-9B, Size: 13/32, Large Side: 1.08" Diameter(Approx. Overall Length: 4" Drawbar End: 1/2" To combine shipping. Please purchase all items needed without paying and email us when you are done. We will send you an invoice with combined shipping charges.
|
|
|
HARDINGE 5C COLLET 13/32" #39
HARDINGE 5C COLLET 13/32" 39 HARDINGE 5C COLLET 13/32" IN GOOD WORKING CONDITION. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ ... more718-370-3275
|
|
|
PICK FIVE OF HARDINGE DAVENPORT COLLET SET 1/4 9/32 13/16 9/16 5/16 1/2
SETS OF 5 HARDINGE DAVENPORT COLLETS Collets are used. But come in great working condition. Seven sets of five Davenport collets are being sold. Sizes of sets: 1/4 9/32 13/16 9/16 Serrated Std. 1/4 5/16 1/2 Item is in good working order. Shipping and Handling for this item is $25. Local pickup is available at 50% of the handling fee. This auction may be ended at any time for local sale. We are actually a screw machine products contract manufacturer. Specializing in production runs of Swiss, CNC, and multi-spindle precision products machined from bar stock and located inSan Antonio. Texas. We are not a dealer but are selling some surplus items. Our website is If you have any questions feel free to contact us before bidding. Satisfaction Guaranteed. You will have a 14 day return privilege, if you are not happy with item. Good Luck, and be sure ... moreto check out our other Auctions and Store items as well Cox Manufacturing Company 5500 N. Loop 1604 E. | San Antonio. Texas 78247 Phone 800-900-7981 | Toll Free 800-900-7981 | Fax 210-657-2345 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14bc7e90137-0x102-
|
|
|
USED 13/32 FOWLER 5C COLLET , WITH INTERNAL THREADS
FOR SALE ONE USED 13/32 FOWLER 5C COLLET. WITH INTERNAL THREADS
|
|
 |