|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States Packages: 1 x 300mm Precision Master Level.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Premium Zirconia Flap Sanding Disc Grinding Wheel 4-1/2 x 7/8" 60 Grit 60Grit Zirconia Flap Discs Flap Discs are made from zirconia , designed for high ... morespeed sanding and heavy duty removal, delivering fast and long lasting cut. Zirconia abrasive provides extended service life and more cutting power than aluminum oxide, saving replacement costs and sanding time. Abrasive disc is made with fiberglass backing which supports a fast cut for grinding and finishing applications; offers extra durability and reinforcement. Overlapped abrasive strips offer more efficient sanding effect and longer service life than conventional fiber discs. Wide Application:.
Buy It Now
Free Shipping Condition: New Location: United States 12" Master Precision Level in Fitted Box For Machinist Tool 0.0002"/10" CA NEW. ——Precision engineers spirit level for setting and checking the level ... moreof machinery and other high accuracy levelling applications.
Buy It Now
$9.95 Shipping Condition: New – Open box Location: Crystal Lake, United States
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Precision engineers spirit level for setting and checking the level of machinery and other high accuracy levelling applications. 1 x 150mm Precision Master ... moreLevel. When reading, it should be observed vertically to avoid parallax.
Buy It Now
$18.65 Shipping Condition: Used Location: Hamburg, United States Ritmar U.S.A. 770A & 770B Collet Sets and two Drill extensions from Whitney. Includes Whitney No. 96004 at 9" in length for #2 series collets (770B) & ... moreNo. 96000 at 4" in length for #1 series collets (770A).
Buy It Now
$136.04 Shipping Condition: Used Location: Middlebury, United States Size: Length: 21 in. Width: 17 in. Height: 11 in. Model: No. 15. To get a freight quote we will need to know the following Need it urgently?. Call us ... moreand we will do what we can to get it to you quickly.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Color: Blue Material: Cast Iron Jaw Width: 6" Anvil size:3.23" x 3.35" Jaw Opening Capacity:6.3" Throat depth:2.6" Description： Heavy duty industrial ... morequality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Package List: 1 x 6" Mechanic Bench Vise .
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States machine shop close-out ,most appear resharpened or nos
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States mostly good used or resharpened
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States machine shop close-out ,most appear resharpened or nos
Buy It Now
Free Shipping Condition: New – Open box Location: New Orleans, United States
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This is a matched set (2 each) of professional quality 2-3-4 blocks They are precision ground and case hardened to RC 55-62 on all six sides. They contain ... more23 each 3/8 inch through holes (5 tapped with 3/8-16 threads and 18 untapped). Overall size is within +/- .0003". Flatness and parallelism are within .0003". Squareness on all sides to within 0.0003". Pairs are matched to a tolerance of 0.0002". There are 2 pieces per set. Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Instrument Type Precision Gage Block Modified Item No Modification Description No.
Buy It Now
Free Shipping Condition: New Location: Chino, United States BI-WMTZXL-311 150mm Precision Master Level Bar Level 0.02mm/m Accuracy Very Popular Description: The level gauge is mainly used to check the straightness ... moreof the guideways of various machine tools and other equipment, the correctness of the horizontal and vertical positions installed, etc. Specifications: Material: Carbon Steel Color: As Shown Accuracy: 0.02mm/m Length: 150mm Features: l Precision engineers spirit level for setting and checking the level of machinery and other high accuracy levelling applications. l Made of premium carbon steel, high quality, durable l With wooden case, easy to store and carry l High accuracy: 0.02mm/m Operation: l Before use, the measured surface and the working face of the level meter must be scrubbed clean.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature: Premium Zirconia Flap Sanding Disc Grinding Wheel 4-1/2 x 7/8" 40 Grit 40Grit Zirconia Flap Discs Flap Discs are made from zirconia , designed ... morefor high speed sanding and heavy duty removal, delivering fast and long lasting cut. Zirconia abrasive provides extended service life and more cutting power than aluminum oxide, saving replacement costs and sanding time. Abrasive disc is made with fiberglass backing which supports a fast cut for grinding and finishing applications; offers extra durability and reinforcement. Overlapped abrasive strips offer more efficient sanding effect and longer service life than conventional fiber discs. Wide Application:.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Compatible Devices: Lathe Material: Alloy Steel Included Components: 1/16inch to 13/16inch (2mm-20mm) Type: ER32 Collet Size: 12 PCS By 16th: ... more1/8, 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"; 13 PCS By 32nd: 1/16'', 3/32'', 5/32'', 9/32'', 11/32'', 13/32'', 15/32'', 17/32'', 19/32'', 21/32'', 23/32'', 25/32'', 13/16'' Length: 19 cm (8 inch) Width: 19 cm (8 inch) Height: 7 cm (3 inch) Gross weight: 4 kg (9 lbs) Color: Silver Quantity: 25 Description：.
Buy It Now
$9.65 Shipping Condition: Used Location: Medina, United States Jacobs No. 14N "Ball Bearing Super Chuck" in gently used Condition. Id# jacobs 14n 4/2 b28.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Heat treated and case hardened to HRC 57-62 Made of precision-grade tool steel hardened and ground on all 6 sides of block Accuracy and ... moresquareness on all sides within .0002" Cross drilling design allows for efficient use of lower weight with maximum strength Dimensions- 2" x 4" x 6", 18.3 lbs. weight Package Including： 2 Pair 2-4-6 Blocks 23 Holes Machinist Precision 246 Jig .0002".
Buy It Now
Free Shipping Condition: Used Location: Oxnard, United States We have large quantity of 5C & R8 Collets. Our 20,000 Sqft Warehouse in Oxnard, CA is always full of Machine tools & accessories for Lathes, Mills & Grinders. ... moreLambert 80 14 15. USE FULL LINK.
Buy It Now
Free Shipping Condition: New Location: Medina, United States
Buy It Now
$24.75 Shipping Condition: Used Location: Medina, United States No. 30-860-12-000A. overall height of 12" with 9" Centerline.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 6" Master Precision Level in Fitted Wooden Box For Machinist Tool 0.0002"/10". Precision engineers spirit level for setting and checking the level of ... moremachinery and other high accuracy levelling applications.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Heat treated and case hardened to HRC 57-62 Made of precision-grade tool steel hardened and ground on all 6 sides of block Accuracy and ... moresquareness on all sides within .0001"-.0002" Dimensions- 1" x 2" x 3", 3.5 lbs. weight 100% Satisfaction Guaranteed! Package Including： 2PCS ULTRA PRECISION 1-2-3 BLOCKS NO HOLES .0001" MACHINIST 123 JIG Brand findmall MPN 292474 Type Gage Block UPC Does not apply Shape Rectangular Material Steel Warranty 1 year.
Buy It Now
$14.50 Shipping Condition: Used Location: Saunderstown, United States Machinists Go-No-Go Gauges. WORCESTER Boys Trade School Set of (9). Made in the USA.
Buy It Now
$4.60 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States
Buy It Now
$7.00 Shipping Condition: New Location: Austell, United States 23 holes includes (5) 3/8-16 threaded holes for clamping and (18) untapped holes. Number of holes: 23 holes. Made of precision-grade tool steel hardened ... moreand ground on all 6 sides of block. Country/Region of Manufacture:China.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Precision engineers spirit level for setting and checking the level of machinery and other high accuracy levelling applications. 1 x 150mm Precision Master ... moreLevel. When in use, the heat source and air flow should be insulated and the temperature should be kept as constant as possible.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: BRAND NEW 30 - 60 - 90 & 45 - 45 - 90 Degree Angle Plate Four holes 11/32" for easy mounting, 9/32" thick Hardened steel Precision ground ... moreangles Accuracy: 0.0001" per inch +/-20 sec 30 degree angle plate measurement: 4'' x 3-15/32'' x 2" 45 Degree angle plate measurement: 3'' x 3'' x 4-3/8" Case dimension: 7''L x 2.8''W x 1.2'' Thickness Shipping Weight: 11 oz UPC Does not apply Item Type Angle Plate Surface Color Steel Gray Brand autoooparts Length 4 in Width 3 in MPN APO132528.
Buy It Now
$4.43 Shipping Condition: Used Location: North Fort Myers, United States Craftsman USA 9-4029 Machinist Protractor Gage Stainless Steel Rectangular Head.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 1/2 to 1-1/2" 9 Pair Wavy Parallel Set Used for the precision clamping of parts in drilling, boring, milling, grinding, assembly work, etc. Can readily ... morebe used as elastic shims. Made of high quality spring steel that has been hardened, stress relieved and precision ground.
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States mostly good used or resharpened
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States TOOLING LOT. LOCATION: WB7-5-4-9. / LABELING PRODUCT SPECIFICATIONS AND / OR LABELING.
Buy It Now
$17.50 Shipping Condition: Used Location: Lockridge, United States Used. Came from a machine shop hobbyist estate sale. See pictures.
Buy It Now
$9.65 Shipping Condition: Used Location: Medina, United States Ritmar U.S.A. 770C Extension & Collet Set in good used condition. Collet sizes include, F, G, H, N, 1/4", 9/32", 19/64", & 5/16". Id: 9pc 770C 3/10 b28.
Buy It Now
$4.90 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
Free Shipping Condition: New Location: Austell, United States Includes : 5 matched pairs (10 blocks).
Buy It Now
$14.62 Shipping Condition: New – Open box Location: Canada
Buy It Now
$14.60 Shipping Condition: Used Location: Wallingford, United States THIS IS A PRATT& WHITNEY 9/16" BORING TOOL BIT. NEW OLD STOCK IN ORIGINAL BOX WITH COATING STILL ON THE TIP. MADE IN U.S.A. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143c45e1128-0xfe-
Buy It Now
Free Shipping Condition: New Location: Medina, United States Id# 9pc garr 4 deg/.03 2/14 b3. 1/8" Shank Dia.5/16" Cut length.
Buy It Now
$4.60 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$17.00 Shipping Condition: Used Location: Flagstaff, United States CALIFORNIA PROP 65 WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Buy It Now
Free Shipping Condition: New – Open box Location: Wisconsin Dells, United States The MAJORITY of these are sized 11/64. There are a very small amount of 5/32 & 9/64, probably less than one dozen of those sizes combined. There are 199 ... morepieces in this lot. A couple of the stickers on the containers are missing.
Buy It Now
Free Shipping Condition: New – Open box Location: Medina, United States Model No. 870-1190-9-MM Grade 2234. 870-1190-9-MM 2234 b33 2/2.
Buy It Now
$12.30 Shipping Condition: Used Location: Wichita, United States Magnetized in VERY GOOD condition with minimal wear from use and storage. AR 364 – NWS.
Buy It Now
Free Shipping Condition: Used Location: Fresno, United States Machine tap. New old stock, 7/8-9 tap, mint unused condition, Check my Ebay store for other machine taps, fishing reels, Umco tackle boxes, International ... moreharvester, FORD wrenches, parts, old farm tools, JOHN DEERE wrenches, etc. on auction, COLEMAN LANTERNS AND PARTS, I ship within 2 business days, Will be glad to combine shipping, 4.50 shipping, Will ship worldwide. `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e13509134-0xf4-
Buy It Now
$9.65 Shipping Condition: Used Location: Medina, United States Pictured lot of US Made and Gently Used #2 Morse Taper Drills from Chicago Latrobe.
Buy It Now
$4.90 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
$17.90 Shipping Condition: Used Location: New Orleans, United States lot of 5c collet. they have different wrapping so assume all are used. see pictures. ask questions if you have them
Buy It Now
Free Shipping Condition: Used Location: Medina, United States 5/8" Indexable End Mill Quality Made by Sandvik and in gently used condition. Cutter No. RA390-016M19-11L with 3/4" weldon shank, 2-Flute, 3¼" overall ... morelength for use with CoroMill 390 -size 11 (R390-11) inserts.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Cornell, United States Threadwell 7/8-9 plug Tap 4 flute Made In USA they are either resharpened or new but all are Sharp Q Free Shipping in usa
Buy It Now
$4.90 Shipping Condition: Used Location: Council, United States I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Buy It Now
Free Shipping Condition: New Location: Wanaque, United States 3pc Carbon Drill Bit Set. Economic Drill Bit Sets. Industrial quality high-speed steel bits. Heat treated, black oxide carbon steel. Complete with a handy ... morestorage case. 29 Drills 1/16" to 1/2". Doing that is against U.S. and international laws.
Buy It Now
$7.95 Shipping Condition: Used Location: Clinton Township, United States The tool looks and feels sharp. The size was checked in several places as pictured. Normal age and use will show.
Buy It Now
Free Shipping Condition: New Location: Medina, United States 1/4" Shank Dia. 9/16" length of cut. Id# 2pc 2OAL 4 deg/.125 aero 1/31 b30.
Buy It Now
$8.25 Shipping Condition: Used Location: Bronx, United States These dividers combine rigidity, light weight and easy handling. The legs are forged steel, well-shaped and properly tempered. The adjustable point may ... morebe quickly removed and a common pencil inserted in its place.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: Standard Shaft Height = 3-1/2" Base to Shaft Center Line. 9-1/32" bolt centers - uses 7/8" diameter mounting bolts. Solid Base Cast Iron Housing. ... moreWide Inner Ring Bearing. Set Screw Locking. Relubricable with Grease Fitting. Specifications: Type: Bearings Equipment Type: Roller Material: Cast Iron Bore Size: 2-15/16 Inch Overall Length: 13" Quantity Per order: 1 Pieces .
Buy It Now
Free Shipping Condition: Used Location: Rosedale, United States Location: 43B. Manufacturer: Brown & Sharpe. List Date: 12/27/22. 4 = Like New.
|
|
|
|
V Vee set up blocks 1 1/4 by 1 1/2 by 1 9/16 tall tool machinist Toolmaker
you get what you see except for the $1.used.quality made by a Connecticut Toolmaker in the 1970's.not engraved or damaged.I will combine.Handling $1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plus $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
9 Putnam Hi-Speed Putnam M-2 Hi-Speed Morse TRW machinist end mills drill bits
lot of 9: each is 1" diameter 1 Putnam Hi-Speed. 1 Putnam Hi-Speed for Alum, 3 Putnam M-2 Hi-Speed,3 Morse LH-HS, 1 TRW, machinist end mills drill bits. Please see pictures as I don't really know what these are other than to tell you they are in very good and sharp codition. US only please. Payment is due within 3 days. Thank you so much for looking!
|
|
|
Vintage 9 3/4" AM-SWISS #1 Rasp File Blacksmith Machinist USA
You are bidding on a vintage AM-SWISS#1 rounded rasp/file.made in USA It measures about 9 3/4" in total length. This file/rasp has some wear and minor surface rust but is still usable and would make a great addition to your workshop or garage and used as a functional tool. Please contact me with any additional questions. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14737f1868c-0x10e-
|
|
|
Vintage 9" WILLIAMS P25 PUNCH Leather Machinist USA
You are bidding on a vintage Williams P25 leather blacksmith metal punch. The punch is about 9" in length. This punch is in excellent condition and would make a great display piece in a workshop or used as a functional tool. Please contact me with any questions. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vtg Sargent & Co Leather Crafting Tool Divider 6.5" Long w/ 9" Spread Machinist
Vintage Leather Crafting Tool Description: Vintage Leather Crafting Tool. This is a machinist divider. Manufacturer by Sargent& Co. 6.5" in length and a 9" spread. Minor wear to metal including a few rust spots. A great leather crafting collectible! Note: Be sure to check out my other vintage leather crafting tool as I just acquired a large collection from an estate of an elderly artist! He had quite a collection that I will be listing this week! The majority of the items that I sell on eBay are vintage items obtained from estate sales. As such. The items are not perfect. Even those items that are in great shape considering their age will usually have some minor flaws simply due to the age. General use, and shelf life. I am not an expert in every item that I sell. But I do my best to describe my items as accurately as possible ... moreand to the best of my ability. Flaws and all. And now the fine print. INTERNATIONAL SHIPPING: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. If item sells for more than $30. Then priority mail shipping will be required so that the item will be insured. Although first class international mail is less expensive(and is the price quoted here) it does not allow for insurance to be obtained. Please note that priority mail shipping is considerably more expensive so please check with me prior to bidding for a quote to your country. CONTACT US: Please contact us through the"message" option on each eBay listing as I check here most frequently(and do not check my email each day) OTHER: Please contact me prior to the close of the auction or before purchasing if you have any questions about the item. My home is a pet-free. Smoke-free home. However, some items sold have been purchased from estate sales, and we cannot guarantee that those items have not been previous
|
|
|
STARRETT No. 445 DEPTH MICROMETER 0-9" with long 6" BASE machinist inspectio *F
Some stains. Engravings and tool marks(removal of old engravings) 0-9" with wide 6" long base. The wood box is missing the little hook clasps that hold the lid closed. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance ... morefor overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Calipers, Vintage Brown & Sharpe Machinist Inside Calipers USA, Opens to 9-1/2"
For your Consideration is this Vintage Brown& Sharpe Machinist Inside Calipers. Range is 0" 9-1/2" The maker is Brown& Sharpe. Providence, R.I. USA. Minor Staining as pictured. This item is in good used Working condition and will be a nice addition to your collection. Please see the pictures and contact me if you have any questions. Please take a look at my other Ebay Stores. http:stores.ebay.com/the-toolz-guy/ http:stores.ebay.com/the-toolz-city/ http:stores.ebay.com/the-toolz-girl/ I have a lot of nice items listed there. MB3.13-5824-10 Normal 0 false false false EN-US X-NONE X-NONE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what ... morethese additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
Lot of 9 Machinist Rulers, The Executive Pocket Chum Caliper & Pocket Pal +++
Lot of 9 Machinist Rulers. The Executive Pocket + All Stainless 6 inch rulers. 2 in leather cases Please see pictures for details& advertising! Thanks for looking& Good Luck Bidding!
|
|
|
1914 Gerstner & Sons 9 Drawer Machinist Chest and a few Machinist Tools
Gerstner& Sons 1914 Style 10A Oak Machinist 9 Drawer tool chest. Box is 20" wide x 12-1/2" tall x 10-1/4" deep. There is no key for the lock. Chest is in very good shape; all the drawers slide and closer cleanly. No parts are missing. There is a gold logo for"New York, New Haven& Hartford" on the front, the patina around which is worn as shown. I'm unsure of the logo's history associated with the chest. Included with the chest are several machinist tools as shown. Do not hesitate to contact me with any questions you have and I will do my best to answer. With over 12 years on eBay you can bid with confidence.
|
|
|
9 Cobalt Alloy HSS Lathe Bits Sherline Taig Machinist Gunsmith Tools Lot
Lot of 9 used heavy duty Cobalt and HSS lathe cutter bits in different shank sizes All are ground into boring bars Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
VINTAGE MACHINIST RULE HOLDER AND 1" RULE PIECE 9" LONG HOLDS UP TO 1/2" RULE
FOR BID IS A VINTAGE MACHINIST RULE HOLDER THAT MEASURES 9" LONG. IT WILL HOLD UP TO A 1/2" RULE. THERE IS NO IDENTIFICATION ON THIS ITEM. IT MAY HAVE BEEN MADE BY THE MACHINIST HIMSELF. IT IS SELLING WITH A 1" PIECE OF A LS STARRETT RULE. Check out my! THESE ARE USED ITEMS AND SELL AS SUCH. PLEASE VIEW PICTURES. EVALUATE CONDITION AND ASK QUESTIONS PRIOR TO BIDDING. PLEASE TAKE NOTE OF SHIPPING CHARGES AND TAKE INTO CONSIDERATION WHEN PLACING BID. VIEW RETURN POLICY. PAYMENT IS EXPECTED WITHIN 72 HOURS AFTER BIDDING CLOSES. IF A DELAY IN PAYMENT IS NEEDED PLEASE CONTACT ME TO MAKE ARRANGEMENTS FOR PAYMENT SO E-BAY DOES NOT START LATE PAYMENT PROCESS. YOUR TIMELY PAYMENTS HELP ME TO MAKE TIMELY SHIPMENTS. I USUALLY HAVE SEVERAL ITEMS LISTED AND I AM WILLING TO COMBINE THEM FOR SHIPPING. PLEASE LIMIT TO A 7 DAY SPAN. PLEASE ... moreCONTACT ME PRIOR TO PAYING FOR A REVISED INVOICE. PAYMENT BEFORE INVOICING WILL RESULT IN COMBINED SHIPPING PRICES OF ITEMS PURCHASED. I WILL COMBINE ITEMS INTO ONE SHIPMENT WHEN EVER POSSIBLE. Be sure to add me to your!
|
|
|
TAP 7/8" NC 9 TAP MACHINIST TAPS AND TOOLS TOOLING
7/8" NC 9 Tap. It is in good condition. Check out my! Be sure to add me to your!
|
|
|
Vintage 1963 Trigonometry Tables Booklet, Illinois Tool Works, Machinist #9
6.5" x 3" pocket size booklet in excellent condition. More vintage paper items are available right now! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE 9" MACHINIST LEVEL SS STARRETT?
You are bidding on an antique 9" machinist's level. All the bubbles are working. I can;t find any makers marks but it looks like a Starrett? Good Luck!
|
|
|
Old Vintage Sears Craftsman Drill-Bit 9-6677 Grinding Attachment Machinist Tool
Up for your consideration is a Sears Craftsman Drill-Bit 9-6677 Grinding Attachment w/ Instructions Box Vintage. It's in good collectible or useable condition. Please look at pictures carefully& ask any questions you have before bidding or buying. Thanks'SHIPPING IS ACTUAL COSTS TO YOUR ZIP. PLUS INSURANCE IF REQUESTED' THIS ITEM WILL BE PACKED TO THE HIGHEST STANDARD, SURROUNDED IN BUBBLEWRAP& ENCLOSED IN A STRONG BOX TO ENSURE A SAFE JOURNEY. I LEAVE POSTIVE FEEDBACK IMMEDIATELY AFTER PAYMENT IS RECEIVED AND NOTIFY YOU WHEN PACKAGE WILL BE MAILED OUT ASAP. I SHIP USPS PRIORITY MAIL. FIRST CLASS OR PARCEL SELECT. PLEASE LEAVE ME FEEDBACK ALSO.IT IS VERY IMPORTANT TO ME TOO SEE THAT YOU LIKED YOUR ITEM& YOU RECEIVED IT SAFELY. Before you leave a neutral or negative feedback, PLEASE email me and I'm sure we can ... morework out any problem, My goal is to have satisfied customers. THANK YOU! You can Pay me securely with any major credit card through PayPal, THANKS FOR LOOKING& YOUR INTEREST IN THE ITEM I'M LISTING.
|
|
|
3" 4 NS GH 9 USA MADE TAP 6 FLUTE 3.0 MACHINE SHOP TOOLING MACHINIST TOOLMAKER
YOU ARE PURCHASING THE PICTURED TAP. ITEM IS USED. IT IS LABELED: REGAL BELOIT. 3" 4 NS HS SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTING FOR MORE GREAT VALUES. I HAVE MANY TAPS(METRIC& STANDARD) IN STOCK UP TO 3" IN DIAMETER. SO IF THIS ISNT WHAT YOUR LOOKING FOR PLEASE CONTACT ME. ALSO HAVE EXTENSION TAPS AND THREAD GAGES. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! On Jun-25-14 at 12:46:18 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
STARRETT 9" MACHINIST SQUARE - OLDER STYLE combination set tools *3
SUPER STARRETT SALE THIS WEEK! Special Shipping Offer: 3 is FREE. Win 3 or more Starrett tools and get FREE shipping. This offer only applies to Starrett auctions that end Friday August 1st and to USA locations. There will be over 30 auctions for Starrett tools. Many in the original boxes and some that look like they have had little if any use. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. ... morePayment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
CRAFTSMAN #9-52180 10" Die Holder Handle Machinist w/2 Dies - FREE SHIPPING
For sale is this CRAFTSMAN#9-52180 Die Holder Handle. Measures 10" long and accepts dies 1" in diameter. Includes 2 Dies- 12-24 and 1/4-20. Very good condition. FREE DOMESTIC SHIPPING! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14771f65789-0x113-
|
|
|
Homak 9-Drawer Rolling Machinist Mechanic Tool Chest Cabinet Box Storage
Homak 9-Drawer Rolling Machinist Mechanic Tool Chest Cabinet Box Storage Very Good Condition! Homak 9-Drawer Mechanic's Rolling Tool Chest with Locking Casters Available for PickUp or Freight Delivery! Homak 9-drawer rolling mechanic's tool chest with locking casters Six drawers 3.5 inches deep Three drawers 1.75 inches deep All drawers pull out fully just past front frame All drawers have original liner pads Handle can be mounted to either side Steering casters have locks(see photo) Overall Dimensions 42-5/8" Height 26-1/2" Width(29-1/2" including handle) 18" Depth Take advantage of this terrific price! Available for pickup Freight shipping weight approximately 150 pounds Photos below show cosmetic condition of actual item for sale 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14774d3522e-0x108-
|
|
|
KBC 9" x 18" GRIP918A Mini Metal Lathe Machinist Toolmaker
Used Metal Lathe KBC tools GRIP 918A 9 x 18 Working dimensions. 3/4 HP. 110 Volt Comes with four jaw chuck. Steady rest, live/dead centers, Outside jaws for 3 Jaw chuck, Stand, Chip guard, tools and all manuals. Year 2004 Light use only. In excellent shape. Local pick-up only or delivery can be arranged in Ontario.
|
|
|
5" SINEBAR NICELY FINISHED sine bar machinist toolmakers tools *9
See my other auctions for more blocks& fixtures I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see ... moreother great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
4 LOK-BLOK MILLING TABLE HOLD DOWN BLOCKS CLAMPS Bridgeport machinist tools *9
2 different sizes on the T-Nuts: 1.1 x 1 x.6. 1.2 x 1 x.9(lenght, width, height) See my other auctions for more blocks& fixtures I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to ... moresend you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
MAGNETIC BRASS TRANSFER BLOCK & FIXTURE machinist toolmakers tools *9
Dimensions: 4.5 x 1.7 x.900(brass block only) See my other auctions for more blocks& fixtures I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment ... moreinsured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
2 RIGHT ANGLE TRIANGLE BLOCKS FIXTURES machinist toolmakers tools*9
The dimensions are 3.8 x 3.8 x 5.5 x.240. See my other auctions for more blocks& fixtures I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment ... moreinsured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
Vintage Brown & Sharpe 9-10" Micrometer w/ box machinist aviation aircraft tool
This Brown& Sharpie Manufacturing Company Outside Micrometer is in great Shape. It measures between 9 and 10 inches. And comes with 2 little silver clips that were in the box. Terms Payment Payment is expected within 72 hours of purchase completing. If payment is not received. An unpaid item case will be filed with E-Bay and the item will be re-listed Shipping Your item will be shipped within 2 business days of the order being placed. Most items ship the next business day. Most items are shipped First Class Mail or Priority Mail depending on the size and weight. Returns Returns are accepted within 14 days after the item was received by the buyer. Please contact us about any concerns before returning an item. Buyer is responsible for paying any return shipping fees.
|
|
|
8Pc Silver & Deming Drill Bit Set Case Dayton 9/16-1" Machinist Fabricator Tool
Mixed set of silver deming drill bits in Dayton case. All High Speed Steel USA except 7/8(Fastenal China) 1" HSS China) If I had to guess I would bet this is better than original as I am sure originally they were all Chinese but now it's mostly USA mfg. See pics of actual item you will receive. Check out my other items for more great tooling deals.
|
|
|
Estate lot 9 Machinist calipers dividers Starrett compass
One of many machinist tools I will be listing. All from an estate sale. A lot of Starrett(with one Lufkin) dividers. The largest is 9" long and the smallest is 3 1/2" long. The largest and the next largest are stamped with a patent date of May 21. 1895. I am willing to combine items for shipping. I am willing to ship this to mainland US buyers for $12.50.
|
|
|
MACHINIST TAPER REAMER BIT MILL MACHINE TOOL SHANK DRILL LATH 2- 9/16" 1- 3/8"
FOR AUCTION: 3 REAMER BITS. LEFT TO RIGHT IN 1st PHOTO. WTUSA 3/8" X 4 5/8" LONG. 2nd WTUSA 9/16" X 5 7/8" LONG. 3rd NITRO USA 9/16" X 6 1/16" ALL SEEM TO BE USED LITTLE IF USED AT ALL. IMPERFECTIONS IF ANY ARE DOCUMENTED IN THE PHOTOS AND DISCRIPTION. HAPPY TO COMBINE SO CHECK OUT MY CURRENT VINTAGE TOOL AUCTIONS AND FOR OTHER CLEAN COOL STUFF. YOU MIGHT FIND SOMETHING YOU DIDN'T KNOW YOU NEEDED. I HAVE TRIED TO DESCRIBE THE ITEMS TO THE BEST OF MY ABILITY THROUGH THE PHOTOS AND TH E ITEM DESCRIPTION. THE ITEM IS BEING SOLD"AS IS. I DO MY BEST TO POINT OUT OR PHOTOGRAPH RELEVANT FLAWS. WHEN DEALING WITH USED OR VINTAGE ITEMS. THERE MAY BE MARKS I DO NOT NOTICE OR MAY NOT BELIEVE ARE RELEVANT. BE SURE TO LOOK OVER THE PHOTOS CLOSELY. IF THE PHOTOS DO NOT SHOW EVERYTHING YOU NEED TO SEE, PLEASE EBAY MESSAGE ... moreME AND I WILL REPHOTOGRAPH AN ITEM AS REQUESTED. WE STRIVE TO SELL ONLY QUALITY PRODUCTS ON EBAY. IF YOU HAVE ANY QUESTIONS AT ALL. PLEASE CONTACT ME THROUGH EBAY MESSAGING PRIOR TO BIDDING AND I WILL ANSWER THEM THE BEST I CAN. WINNING BIDDERS IN THE LOWER 48 U.S. CAN PAY THE EBAY GENERATED INVOICE BECAUSE THE SHIPPING RATE QUOTED IN THIS AUCTION IS SET IN STONE. INSURANCE NOT INCLUDED. IF YOU PREFER A SPECIFIC TYPE OF SHIPPING. NOTIFY ME THRU EBAY MESSAGING AT THE END OF THE AUCTION AND I WILL COMPLY. I ACCEPT RETURNS ON USED OR VINTAGE ITEMS BUT I DO NOT ACCEPT RETURNS ON NIB ITEMS. BE SURE THAT WHAT IS UP FOR AUCTION WILL FIT YOUR NEEDS OR APPLICATION BEFORE YOU BID. INTERNATIONAL SHIPPING: I AM HAPPY TO SHIP ANYWHERE OUTSIDE THE LOWER 48 U.S.A. ATTN: IF YOUR ADDRESS IS NOT IN THE LOWER 48 U.S.A. PLEASE DO NOT PAY THE EBAY GENERATED INVOICE. YOU WILL GET A NEW INVOICE WITH THE ACTUAL SHIPPING COSTS TO YOUR ADDRESS/COUNTRY!
|
|
|
MACHINIST TOOLS LATHE MILL 9" South Bend Model A Lathe 48" Long
South bend lathe Converted to v belt Comes with 3 and 4 jaw chucks Local pick up only Posted with
|
|
|
Footprint Sheffield England 9" Quick Adjust Outside Caliper Divider Machinist
Here is an outside caliper. This is marked FOOTPRINT SHEFFIELD ENGLAND. It has a quick adjust feature; the nut is split so when tension is released the nut can be moved to about the right size. Once the nut is where you want it. Slide the inner ring to and the nut locks up the threads(using the spring tension) It can then be fine adjusted by turning the nut like a normal caliper. This measures abo ut 9" long. The legs open to about 8 1/4" wide. This is used. It has some scratches and wear. There are some small rust spots here and there. The legs do not line up perfectly. Please view pictures to see condition. This will ship First Class in a box; Shipping will cost $4.48. I combine shipping when possible. I accept PayPal. Please ask any questions. Please view my other auctions!
|
|
|
Lot of 9 Machinist's Lathe 5/8" Cutting Tools HSS & Carbide Vasco Kennametal
Click to Enlarge Click to Enlarge Click to Enlarge Lot of 9 Machinist's Lathe 5/8" Cutting Tools HSS& Cemented Carbide Vasco. Kennametal, other Showing wear consistent with age. See Photos for Overall Quality and Condition We are located in Phoenixville. Pennsylvania and offer heavily discounted new, used and surplus commercial, industrial& household items. Most items will generally have light cosmetic marks, dust, scratches, dings and such from time in use or shelf wear. All items come as shown, notable deficiencies will be described above. Thanks for looking. FOR ADDITIONAL INFORMATION REGARDING SHIPPING. PAYMENT, AND RETURNS PLEASE READ OUR RETURN AND CHECKOUT INSTRUCTIONS FOR IMPORTANT INFORMATION. inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Blacksmith made 9 1/2" dividers mark out measurement machinist vintage tool old
Very Early 9 1/2" dividers. If you like bright and shiny you won't like this. If early. Character and patina is your thing then you should have a good look. Check out my! I will be selling a huge selection of old tools and other interesting items in the future. Please consider adding this site to your favourites. I will combine postage on multiple purchases. If you intend to buy several items please let me know and I will send an invoice after the last auction you are bidding on. Please send all messages via Ebays ask a question. All purchases to be paid for within 3 working days. PLEASE NOTE- NO PICK UPS. at the present time. Thanks. Please Note. INTERNATIONAL SHIPPING CAN BE VERY EXPENSIVE. Please ask for a quote before bidding.
|
|
|
5 MORSE ARBORS/ADAPTERS/SHAFTS/EXTENDERS:17/32,9/16,3/8,1/4,3/16 MACHINIST TOOLS
5) RARE MORSE ARBORS/ADAPTERS/SHAFTS/ SHANKS/EXTENDERS. MALE-to-MALE, SIZES: 17/32" 9/16" 3/8" 1/4" 3/16" DIA. STEEL TOOLS Used and in very good condition. Rare Morse Steel Arbors/Adapters/Shafts/Shanks/Extenders. Male-to-Male, flattened on one side at each end, small countersunk holes at each end, non-tapered. Tool Sizes: 17/32" 9/16" 3/8" 1/4" 3/16" Machinist tools, machine shop tools. LIMITED QUANTITY. We have only one of these left to sell. Consumertronics.net welcomes you! Thank you very much for considering our Off-The-Shelf Items. We have 1.000s of handtools, power tools/ electrical tools/ electronic tools, test equipment/ meters/ gauges/ testers, other mechanical devices, and specialized materials- all in stock here at our techzonics.com Online Super Store(ABQ Techzonics, Albuquerque, ... moreNM) Some of these devices and special materials originated from Lone Star Consulting, Inc. of El Paso, TX(lonestarconsultinginc.com) legendary researchers into mind control, electronic attack and electronic harassment. Please visit our many other eBay offers. Should we not now have listed on eBay the tool, device or material you need, please email us, and if we have it to sell, we will try to list it on eBay. Should this Item be what you seek but you need it in a different quantity, please email us, and we will try to list it on eBay in the quantity you need. We are technical professionals to serve YOUR High-Tech Survival& Security needs. backed by 25+ Years of Top Professional Experience! PAYMENT. SHIPPING, GUARANTEES& OTHER POLICIES: PAYMENT: We accept payment in full by PayPal. If you wish to pay us some other way. Email us before buying this Item for our explicit prior approval. We are a Verified PayPal Merchant. We treat Approved PayPal same as cash. PAYPAL LIMITATIONS: 1) No foreign PayPal over $49 without prior approval. 2) No PayPal paid for by credit card over $49 without prior approval. 3) No Unverified Address PayPal over $99 without prior approval. We rese
|
|
|
(#4639) Used Machinist 9/16 inch MT Shank Reamer
Lot 4639 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4639) Used Machinist 9/16 inch MT Shank Reamer You are bidding on a used. With no manufacturer’s markings on it, Morse taper shank reamer. Its features are: 5624 of an inch in diameter* High speed steel* 6 straight flutes that are 2-1/4 inches in length* 9 inches in O.V.L. Has a No.2 Morse Taper shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by First Class Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. shipping Wt 13 ... moreOZS. Thank You for Looking!
|
|
|
RABONE CHESTERMAN No. 9 BSS939 4" PRECISION MACHINIST SQUARE made in ENGLAND *18
Nice smaller machinist square from our friend on the other side of the pond. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1478eb32851-0x10b-
|
|
|
STARRETT 25-109 DIAL INDICATOR GAUGE WITH 9.6MM MOUNT MACHINIST TOOL
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. STARRETT 25-109 DIAL INDICATOR GAUGE WITH 9.6MM MOUNT MACHINIST TOOL This auction is for one Starrett ... more25-109. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an additional handling fee for the packing of the item. We will only ship to locations in the United States using our shipping account. If you purchas
|
|
|
9 Cobalt HSS CounterBore Bits Machinist Lot Gunsmith Aircraft Lathe
This auction is for a lot of 9 Counterbore bits with two flutes and solid pilots Sizes: 5/16 X 7/16. 1/4 X 3/8, 3/32 X 1/4, 3/32" X 1/8, No 10, No 8, No 6, No 5, No 4, No 2, Shanks range from 3/16" to 3/8" Made by Threadwell Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show the items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-1479637e1bf-0x111-
|
|
|
New Machinist's Arbor for Jacob's Chuck for 9" lathe
Up for no reserve auction is this new machinist's arbor for Jacob's chuck for 9 inch lathe. Arbor is 4 inches long. The taper is Morse#2. Please see pictures. Shipping: First Class Mail 6oz. THE FINE PRINT: Our items are sold AS-IS! Because they are generally antique(i.e.quite old) They will likely have dings or scratches or other“issues” we try to supply the best photos and descriptions possible, and strive to describe items as accurately as possible- PLEASE ASK QUESTIONS or ask for additional photos BEFORE BIDDING if you want or need any clarification of what is being sold! I check the computer just about every day so I can probably get you a response within 24 hours. WE NO LONGER SHIP INTERNATIONALLY! Due to ebay's policy that punishes the seller for shipments oversees that get damaged by international postal services. We will ... moreship to US ONLY. IF YOU BID FROM AN INTERNATIONAL SITE, we will only ship if you provide a shipping destination within the US. HANDLING FEES NOTE: WE DO NOT CHARGE HANDLING FEES: but we DO add the cost of USPS tracking and insurance(if noted in the description) into the total cost of shipping. These are reflected in the total“shipping and handling” cost. Additionally. We are now including the 9% fee surcharge on shipping that ebay has stuck to the seller(also reflected in the total“shipping and handling” cost) ON THE BRIGHT SIDE: We are very proud of our consistently high ratings from our customers. If for any reason you believe you cannot rate us at 5 STARS across the board. Please contact immediately us to see what we can do to earn those ratings!
|
|
|
MACHINIST'S STEEL PARALLELS PAIR : 11-9/16" x 1-13/32" x 1"
MACHINIST'S STEEL PARALLEL SET OF 2 MACHINIST'S STEEL PARALLEL SET OF 2. 11-9/16" x 1-13/32"x 1" OVERALL DIMENSIONS. MANUFACTURER UNKNOWN. NO MARKINGS. NO INSTRUCTIONS. STORAGE CASE OR PACKAGING. PARALLEL SET USED IN GOOD WORKING ORDER- MINOR SCRATCHES& FINISH WEAR- MILLING MARK ALONG EDGE OF ONE WIDE SIDE. SEE PICTURE- ENDS HAVE BEEN OWNER STAMPED, SEE PICTURE- AGES UNKNOWN- SOLD AS IS
|
|
|
9/16 12 NC HAND TAP MACHINIST MACHINE SHOP TOOLS TOOLING HSS TAPPING THREAD
FOR SALE IS THE PICTURE HAND TAP. THE TIP OF THIS TAP HAS BEEN REGROUND TO A BOTTOMING STYLE* USED. BUT STILL VERY SHARP! Labeled: MORSE USA 9/16 12 NC HS GH3 I WILL COMBINE SHIPPING! I WILL SHIP INTERNATIONAL!
|
|
|
REGAL ACME TANDEM ONE PASS 7/8 - 9 HSS TAP MACHINIST TOOLING TAPS N TOOLS
REGAL ACME TANDEM ONE PASS 7/8- 9 HSS TAP. EXCELLENT CONDITION I HAVE HUNDREDS OF TAPS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW. REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. INCH TAP DRILL SIZES Recommended tap drill sizes(for approx. 75% thread) INCH SIZES- NATIONAL COARSE- TAP DRILL SIZE SIZE- 1-64#53#2-56#51#3-48 5/64" 4-40#43#5-40#39#6-32#36#8-32#29#10-24#25#12-24#17 1/4-20#7 5/16-18 F 3/8-16 5/16 7/16-14 U 1/2-13 27/64 9/16-12 31/64 5/8-11 17/32 3/4-10 21/32 7/8-9 49/64 1"8 7/8 1-1/8-7 63/64 1-1/4-7 1-7/64 1-1/2-6 1-11/32 1-3/4-5 1-35/64 2"4-1/2 1-25/32- INCH SIZES- NATIONAL FINE- TAP DRILL SIZE SIZE- ... more0-80 3/64" 1-72#53#2-64#50#3-56#46#4-48#42#5-44#37#6-40#33#8-36#29#10-32#21#12-28#15 1/4-28#3 5/16-24 I 3/8-24 Q 7/16-20 W 1/2-20 29/64 9/16-18 33/64 5/8-18 37/64 3/4-16 11/16 7/8-14 13/16 1"14 15/16 1-1/8-12 1-3/64 1-1/4-12 1-11/64 1-1/2-12 1-27/64 1-3/4-12 1-43/64 2"12 1-59/64- TAPER PIPE SIZES- NPT- TAP DRILL SIZE SIZE- 1/8-27 R 1/4-18 7/16 3/8-18 37/64 1/2-14 23/32 3/4-14 59/64 1"11-1/2 1-5/32 1-1/4-11-1/2 1-1/2 1-1/2-11-1/2 1-47/64 2"11-1/2 2-7/32 2-1/2-8 2-5/8 3"8 3-1/4 3-1/2-8 3-3/4 4"8 4-1/4- STRAIGHT PIPE SIZES- NPS- TAP DRILL SIZE SIZE- 1/8-27 S 1/4-18 29/64 3/8-18 19/32 1/2-14 47/64 3/4-14 15/16 1"11-1/2 1-3/16 1-1/4-11-1/2 1-33/64 1-1/2-11-1/2 1-3/4 2"11-1/2 2-7/32 2-1/2-8 2-21/32 3"8 3-9/32 3-1/2-8 3-25/32 4"8 4-9/32- I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PA
|
|
|
Vise, Vintage Machinist Clamp / Vise, 9 oz., 31/32" Wide Jaws, Opens to 1-1/4"
For your Consideration is this Vintage Machinist Clamp/ Vise. Weights 9 oz. Measurements are: 31/32" Wide Jaws. Opens to 1-1/4" This tool was made by a toolmaker. Item is in Good used Working Condition. See the pictures and email me with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB9.1-5488-6 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
MATCHED PAIR PRECISION 9/32" X 1 3/8" X 6" MACHINIST BLOCKS
Here for your consideration: MATCHED PAIR PRECISION 9/32" X 1 3/8" X 6" MACHINIST BLOCKS PARALLELS I have a friend who recently had a triple by pass. He told me it's time to sell off his machinist's equipment& enjoy some time with his family. I will be listing more items as he brings them. Please check back again. No need to scroll through page after page. Go to my Ebay store then just use the menus to find items of interest to you. Easy as pie! Excellent used condition. Minor spots of rust. Or cleaned off rust. I am not an expert in this area but please feel free to ask questions. Shipping& Handling U S A. $6.80 USPS Priority mail( I only get across the border once a week. So it may start out slower but you will still get it quickly) Canada. $12.99- $20.99 CPC Depending on Postal Code Be sure to add me to your ... morefavorites list! Check out my other items! Payment is required in full within 5 days of listing end. Methods of payment: Paypal Thanks for your interest Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MACHINIST LATHE MILL 9" Universal Rotary Table Horizontal Vertical for Mill
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. It is missing the little knob/ handle that goes on the larger handle. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined ... moreshipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147a93fac4a-0x112-
|
|
|
Chinese Lathe Chuck 9 7/8" Diameter with Adaptor Plate 4 Jaw Machinist Tool
The Following Item is for sale 1- 4- Jaw 9 7/8" Lthe Chuck Made in China comes with Wrench and Adaptor Plate. Item is in good working order and good condition unless otherwise noted. Please email any questions before bidding. Thanks for your interest in this item and Good Luck Bidding! All International Items Require Priority Mail no acceptions for International buyers due to insurance requirements. Powered by SixBit's eCommerce Solution
|
|
|
Machinist Knee, Measures 2" x 2-9/32" x 2-19/32" Cast Iron Knee / Fixture
For your Consideration is this Machinist Knee. Measures 2" x 2-9/32" x 2-19/32" Cast Iron Knee/ Fixture. This item is in Good used Working Condition. See the pictures and email me with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB3-5824-22 Normal 0 false false false EN-US X-NONE X-NONE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
Vintage machinist Tap T Handle 6 of 9
You are Bidding on a Machinist T Tap Handle No Makers Mark Good Condition Please Look closely at the photos Made in USA See Pictures for other details Please read the descriptions carefully. If you have questions please ask as I do not take returns. Shipping Info: The cost of shipping is calculated by The United States Postal Service. I enter a weight and USPS calculates the cost by weight. Package size and the distance it has to travel. I do combine ship on multiple items purchased I ship USPS Priority. Please note: Once an item leaves my facility I have no control over how long it takes to be delivered to you. Note to overseas bidders: I do not decide the cost of shipping over seas the United State Postal Service Does. In some cases. Shipping items parcel post is not an option due to weight, Package size, or country of destination. So Please ... moredo not blame me for the high cost of over seas shipping. I can only communicate in english
|
|
|
Vintage Stanley 9" Iron Level Machinist Tool No. 37 - Patd. 6 23 1896
Please ask if you have any questions.
|
|
|
Tools 2.9 Oz 8in Brass Hammer Machinist Jewelers Blacksmith
Tools 2.9Oz 8" Brass Hammer New Please view the photos and judge for yourself as it is previously owned Sold As Is- As Found what you see in the pictures is what you will get. Payment has to be done in within 3 days after listing has ended otherwise I will relist the item. Paypal Only! Shipping: I will only ship to the continental US. Email me with any questions before bidding. Thanks for looking and please view my other auctions Thank you! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-147c057a623-0x109-
|
|
|
USA 13/32 x 9/32 piLot Counter bore Spotfacer lathe machinist aircraft tool
AEROSPACE/ MACHINIST TOOL Lot lightly used Niagara USA Counterbore/Spotfacer: 1- 13/32" x 9/32" Pilot. 3/8" Shank* Please click on Counterbores to the left to view other sizes* NOTE: THIS ITE M WAS LIGHTLY USED and IS IN VERY GOOD USABLE CONDITION! HAS VERY MINOR NICKS ON THE FLUTES. WITH A MINOR NICK HERE and THERE. HAS MINOR SURFACE RUST HERE and THERE. THIS IS STRICTLY A COSMETIC ISSUE. BOX HAS DISCOLORATION. SURFACE SCRATCHES and PART OF THE STICKER HAS BEEN TORN OFF FROM SHELF WEAR. NICE LOT/ NICE PRICE YOU WILL NOT BE DISAPPOINTED SQUARE IS FOR REF. ONLY PLEASE VISIT MY STORE! ALL OF MY ITEMS ARE PACKAGED AND SHIPPED WITH GREAT CARE! ALSO DELIVERY CONFIRMATION IS INCLUDED AND THE TRACKING# WILL BE UPLOADED TO EBAY AND PAYPAL FOR EASY ACCESSIBILITY! THANKS AND TAKE CARE! Froo www.froo.com | Froo Cross Sell. Free Cross ... moreSell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-147c05e1172-0x111-
|
|
|
VINTAGE MORSE TWIST DRILL & M CO MACHINIST'S 5/16 HAND TAPS (9)ea IN WOODEN BOX
UP FOR YOUR CONSIDERATION A VINTAGE SET OF 9 ea. MORSE TWIST DRILL& M CO MACHINIST'S HAND TAPS 5/16 IN A WOODEN BOX- THE BOX IS STAMPED MORSE MACHINIST'S HAND TAPS 5/16 WITH MORE THAT I CANNOT READ- THE WRITING IS ON THE TOP I HAVE JUST GOT TO MAKE IT OUT) THE TAPS ARE STAMPED* MORSE TWIST DRILL& M CO 5/16- CHECK THE PICS AS THEY ARE PART OF THE DESCRIPTION- QUESTIONS CONTACT ME ALL WILL BE ANSWERED- THANKS FOR DROPPING BY- PAYMENT DUE WITHIN 3 DAYS OF AUCTION END- di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-147c3601344-0x111-
|
|
|
Machinist 9 1/2" BUCK TOOL 4 Jaw Reversible Chuck 3" Bore Made for SHELDON Lathe
I will be listing a nice variety of MACHINIST LATEH CHUCKS tonight and this week including LOGAN. BUCK, REM, SHELDON, CUSHMAN, etc. and a nice variety of LATHE RESTS and other Tools including CHNADLER, SOUTHBEND, CLAUSING, etc. so please see my other listings! I was fortunate to come into this collection and have researched these items to be somewhat knowledgeable for the listing but pleas ask questions as I may not know what is important to you in my description. The item in the photos is the item you will get and everything shown in the photos is what comes with the item. For your Bidding Consideration in this Auction is the following Part(s) LOT NUMBER: 2 ITEM: Buck Tool for Sheldon 9.5" Chuck w/ 4 reversible 4" Jaws. The Lathe is marked"BUCK TOOL CO. MADE IN USA FOR SHELDON" COMMENTS: It comes with the Mounting Plate(someone ... moreplease let me know if this is not correct and I will add the info to the listing) for attaching it to the lathe. The bore is 3" The number"063" is engraved itnto the top side of the chuck and the number"L-161" on the bottom side(on the mounting plate) The Jaws all move as intended and are reversible. SHIPPING WEIGHT ESTIMATE: 60 Pounds SELLERS TRADE PRACTICES: I want your Bidding and Purchasing experience with me to be a satisfactor y one in every way. I have provided a few thoughts below to help you understand my practices and what has proven to work successfully for me and over 5000 of my customers in ensuring an above satisfactory transaction here on Ebay. Please let me know if you have any questions or comments! FEEDBACK: I gladly provide POSTIVE FEEDBACK once our transaction has been completed to your satisfaction and I have recieved your Positive Feedback. PAYMENT: I accept Paypal payment and you should pay for your items within 4 days of the Auction close. I use Ebay's system for payment reminder and notification. LISTING/ ITEM DESCRIPTION: Please ask questions- I try and describe items as best I can. And add corresponding Photos, bu
|
|
|
Machinist Lot of 9 Micrometer Wrenches Pre-owned Used
Up for your Consideration is a Nice Machinist lot of 9 assorted Pre-owned Used Micrometer Wrenches.
|
|
|
VINTAGE HEAVY DUTY GUILLOTINE MACHINIST CLAMP 9-1/2LBS WIDTH 6-1/2"
VINTAGE HEAVY DUTY GUILLOTINE MACHINIST CLAMP 9-1/2LBS WIDTH 6-1/2" HEIGHT 6-1/4" EXCELLENT CONDITION. NO PREVIOUS OWNER MARKS. NO RUST. OPENS AND CLOSES NICELY.
|
|
|
vintage Brown & Sharpe 627B Radius Gage set 9/32-33/64" machinist aircraft tool
MACHINIST/ AEROSPACE TOOL Lot 1- Vintage Brown& Sharpe USA 627B Radius Gage Set 9/32-33/64" Please click on Hand Tools to the left to view Micrometers to Power tools* NOTE: THIS ITEM IS USED and IS IN GOOD- VERY GOOD USABLE CONDITION. HAS minor SURFACE SCRATCHES and DISCOLORATION FROM NORMAL USE. THE BASE/BODY/HOUSING HAS minor PITTING HERE and THERE. THE LEAVES/GAGES HAVE minor PITTING and minor SURFACE RUST HERE and THERE. THE LOCK NUT/SCREW WORKS AS IT SHOULD and HAS minor PITTING HERE and THERE. NICE LOT/ NICE PRICE YOU WILL NOT BE DISAPPOINTED SQUARE IS FOR REF. ONLY PLEASE VISIT MY STORE! ALL OF MY ITEMS ARE PACKAGED AND SHIPPED WITH GREAT CARE! ALSO DELIVERY CONFIRMATION IS INCLUDED AND THE TRACKING# WILL BE UPLOADED TO EBAY AND PAYPAL FOR EASY ACCESSIBILITY! THANKS AND TAKE CARE! Froo www.froo.com | Froo Cross Sell. Free ... moreCross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Metal Lathe Tool Make Machinist FOLLOW Rest Atlas Craftsman 9-396
Metal Lathe Tool Make Machinist Follow Rest Model 9-396 Atlas Craftsman. I have a stead rest on another auction that looks like it was from the same lathe. If you win both I will combine shipping
|
|
|
MORSE 7/8 9 NC 4 FLT USA 4 3/4" L TAP MACHINIST TOOLING TOOL HAND TAP 1/2"
MORSE 7/8 9 NC 4 FLT. USA- 4 3/4" L- TAP MACHINIST TOOLING TOOL 1/2" DRIVE HAND TAP. Pre Owned Nice Condition very lite use. I will Ship Free USPS First Class Mail Service. I package well and ship Promptly after payment clears through Paypal. Thank You In Advance!
|
|
|
Machinist Lathe Tool: Atlas Milling Attachment #9-501
Up for auction is an Atlas Milling Attachment#9-501 for an older Atlas lathe. In usable condition, dirty/tarnished from age/use, will need to be cleaned and oiled, has a couple of mill marks, handle crank is missing. PLEASE VIEW THE MOUNTING HOLES AND PIN to make sure this will accommodate your lathe! Also includes a milling drawbar and 2 milling arbors seen in pics. Both have a 2 MT, one has a 5/8" bore and the other has a 7/8" bore, not sure if they're homemade. PLEASE NOTE: Package is heavy and will not be combined with any other listings. Please see our other listings 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147d29b4886-0x117-
|
|
|
Vintage 9" PUNCH Leather Machinist Metalwork Tool
You are bidding on a vintage blacksmith/leather metal punch. The punch is about 9" in length.has a twisted square-tip look. This punch is in excellent condition and would make a great display piece in a workshop or used as a functional tool. Please contact me with any questions. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NORTH AMERICAN .3/4 - 20 GH 9 PILOTED HSS TAP MACHINIST TAPS N TOOLS
NORTH AMERICAN 3/4- 20 PILOTED GH9 HSS TAP VERY NICE CONDITION I HAVE HUNDREDS OF TAPS AND DIES AT A PRICE 4 TO 10 TIMES LOWER THE SAME PRODUCT RETAIL. MOST LISTED TAPS. DRILLS, AND DIES ARE NEW OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAK OR DAMAGE MY $20.00 TAP SURE HURTS THE POCKET LESS THAN THE SAME RETAIL TAP@ $200.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. INCH TAP DRILL SIZES Recommended tap drill sizes(for approx. 75% thread) INCH SIZES- NATIONAL COARSE- TAP DRILL SIZE SIZE- 1-64#53#2-56#51#3-48 5/64" 4-40#43#5-40#39#6-32#36#8-32#29#10-24#25#12-24#17 1/4-20#7 5/16-18 F 3/8-16 5/16 7/16-14 U 1/2-13 27/64 9/16-12 31/64 5/8-11 17/32 3/4-10 21/32 7/8-9 49/64 1"8 7/8 1-1/8-7 63/64 1-1/4-7 1-7/64 1-1/2-6 1-11/32 1-3/4-5 1-35/64 2"4-1/2 1-25/32- INCH SIZES- ... moreNATIONAL FINE- TAP DRILL SIZE SIZE- 0-80 3/64" 1-72#53#2-64#50#3-56#46#4-48#42#5-44#37#6-40#33#8-36#29#10-32#21#12-28#15 1/4-28#3 5/16-24 I 3/8-24 Q 7/16-20 W 1/2-20 29/64 9/16-18 33/64 5/8-18 37/64 3/4-16 11/16 7/8-14 13/16 1"14 15/16 1-1/8-12 1-3/64 1-1/4-12 1-11/64 1-1/2-12 1-27/64 1-3/4-12 1-43/64 2"12 1-59/64- TAPER PIPE SIZES- NPT- TAP DRILL SIZE SIZE- 1/8-27 R 1/4-18 7/16 3/8-18 37/64 1/2-14 23/32 3/4-14 59/64 1"11-1/2 1-5/32 1-1/4-11-1/2 1-1/2 1-1/2-11-1/2 1-47/64 2"11-1/2 2-7/32 2-1/2-8 2-5/8 3"8 3-1/4 3-1/2-8 3-3/4 4"8 4-1/4- STRAIGHT PIPE SIZES- NPS- TAP DRILL SIZE SIZE- 1/8-27 S 1/4-18 29/64 3/8-18 19/32 1/2-14 47/64 3/4-14 15/16 1"11-1/2 1-3/16 1-1/4-11-1/2 1-33/64 1-1/2-11-1/2 1-3/4 2"11-1/2 2-7/32 2-1/2-8 2-21/32 3"8 3-9/32 3-1/2-8 3-25/32 4"8 4-9/32- I AM A MACHINIST OF 35 YEARS I KNOW WHAT
|
|
|
Federal Testmaster .0005" Jeweled Test Dial Indicator Machinist tool T-9
A Federal Testmaster model T-9 dial indicator. It does show some light soiling and wear. When the tip is touched. The dial moves, correct functionality beyond that is unknown as I am not an expert. All parts that I got with it are shown. Please see the photos and email any questions. Buyer pays shipping, I will combine shipping. Please email after the auctions are done so I can combine the shipping costs as the calculator will not do it automatically. I will ship as soon as payment is received. Check out my!
|
|
|
Machinist Hammer PLUMB 9 oz. Head Wood Handle T9-812 For Ball Pein Hammer
MACHINIST HAMMER- PRE-OWNED& IN GOOD USED CONDITION HEAD HAS PLUMB 9 OZ. IMPRINTED ON IT HANDLE IS 11" LONG; HEAD IS 4" LONG WOOD HANDLE SAYS: 12" MACHINIST HAMMER. 59-812, FOR 8- 12 OZ. BALL PEIN HANDLE IS FIRMLY ATTACHED TO HEAD WITH NO MOVEMENT; HANDLE HAS SOME PAINT& SMALL STAINS ON IT; BUYING"AS IS"
|
|
|
machinist clamp,s vise,s mixed lot of 9 tools
machinist clamp.S vise,s mixed lot of 9 tools 3 corner clamps/harman 2 parallel clamps/starrat 2 vintage pony clamps/Cincinnati no.54 1 pair connected vise grips looks like a heavy machinist vise clamp i tested works fine Please feel free to ask any questions? due to the heavy weight shipping wont be cheap
|
|
|
STARRETT No. 62 RULE HOLDER Vintage TOOLMAKER MACHINIST 3/4" to 1-9/16"
STARRETT No. 62 RULE HOLDER Vintage TOOLMAKER MACHINIST 62 Rule Holder. 3/4" to 1-9/16" 19-40mm) Wide. Rule Holder holds any rule or combination square blade from 3/4 to 1-9/16" 19-40mm) wide in an upright position for use in transferring measurements with surface gauges. Depressions on each side for thumb and fingers provide handling convenience.
|
|
|
Vintage ,KENNEDY METAL MACHINIST TOOL BOX 20" x 9.5" x 8.5"
Hello. Welcome to our auctions. The description includes photos and magnification of those photo's and they are worth a thousand words. Insurance and tracking is included in the shipping price. All sales Final. Please do not contact with offers, we run all auctions to completion. Here is a used. Vintage.KENNEDY METAL MACHINIST TOOL BOX 20" x 9.5" x 8.5" I have no idea if tray is original or not, has finish loss, rust etc, All items have to be paid by paypal within 3 days unless prior arrangements are made. Some local picks will be allowed but cash is required for pick up. NOTE the price of insurance and tracking are included in the shipping price. We do require both on all items. All items are sent parcel post. Unless flat rate or priority is cheaper. We use fedex and ups when items are large or very heavy. A ll foriegn ... moreitems sent priority we do not offer first class shipping on any item. Please make note of this prior to bidding, thank you. We are open from 8-6 M-f and answer emails during this time. All items sold are as is unless we specify other terms in the auction. All items not paid in 3 days will receive an automated non paying bidder. All items are sent to paypal or ebay confirmed addresses. This may be inconvenient but it is for your protection INTERNATOINAL BUYER NEED TO BEAWARE THAT ITEMS HELD UP BY CUSTOM ARE NOT THE RESPONDSIBLILITY OF THE SENDER AND THAT WE CAN NOT BE HELD RESPONDSIBLE FOR THIS DELAY. IF NEGATIVE FEEDBACK IS LEFT DUE TO THIS WE WILL REQUEST REMOVAL OF YOUR FEEDBACK. WE DO NOT SHIP FIRST CLASS SO PLEASE DO NOT ASK. ALL ITEMS SENT PRIORITY INTERNATIONAL NO MATTER WHAT COUNTRY YOU LIVE IN. WE WILL PROVIDE TRACKING NUMBERS TO CUSTOM BUT CAN NOT TRACK ANY FURTHER. THANK YOU AND HAVE A WONDERFUL DAY.
|
|
|
9 Machinist Tap Lot Morse Vermont American USA NPT NC 7/16 - 1 1/8"
Twtybg's Unique Estate Finds Tap Lot This auction is for a lot of Taps. The lot includes: VA 18mm x 150. Made in USA. BTRFLD HSG 5/8 NC 11 GH-3 VA 7/16-20 Made in USA. VA 1/2 Pipe Made in USA Morse 1/2 13 NC HS GH3. Craftsman 1/2 Pipe Made in USA Card HSA 1/2- 14 NPT 69. 3/4 NPT 14 Besly 1-1/8" 16 N HS GH10 53. From an electrician's estate. I'm selling several cool items this week. So please checkout my other auctions. Shipping: I only ship using USPS. This item will be shipped via USPS mail with Delivery Confirmation and Insurance. Items over $500: I ship once a week. Insurance: Insurance is included in the shipping costs. Combined Shipping: When feasible. Multiple won items will be packaged together and shipping costs will be recalculated for the combined weight. I declare full value on international customs forms and the ... morebuyer is responsible for any custom's fees. Though I ship Priority or Express international mail, the shipping transit and custom's time/delay by the Postal services are out of my control. Seller's Note: I describe my items to the best of my ability. Condition descriptions are based on my perceptions. You should use the pictures further evaluate the condition. Most of my items come from estates sales. The items are secondhand. Though they may be unused in some cases. If you have any questons please ask before auction ends. I cannot guarantee the items come from a pet free or non-smokers home. If you have special allergies, please be aware. All items sold as-is. Feedback is important to me. Once you have received your purchase in the described condition and you are satisfied. Please leave 5 Star feedback and I will do the same. I ship using 100% recycled packing(bubble wrap and popcorn) materials. Check out my other listings at. Powered by The free listing tool. List your items fast and easy and manage your active items. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147edaf9faa-0x10f-
|
|
|
Antique Sawyer Tool Mfg Co Protractor # 490 with 9" Scale machinist tool
Antique Sawyer Tool Mfg Co Protractor# 490 with 9" Scale machinist tool Level bubble is broken The scale is a Sawyer Hard No. 4 In as found condition. Needs cleaning All parts move freely It is believed accurate Shipping& Handling: I generally ship by USPS priority mail or if the item is large by USPS Parcel Post. If the item will fit in to a flat rate box USPS priority box. I will ship using this method. I no longer ship by UPS. Very large items are generally shipped by Fed Ex Ground. No one can be an expert at everything; I do my best to describe the item accurately. And honestly. I guarantee my item against being“Dead On Arrival” except where otherwise noted as a final sale or if damaged by the shipping agent) However, I encourage you to look over the description, photos and ask questions. Please, do not return items for flaws ... morethat have been pointed out in my description. I(the seller) accept absolutely no responsibility for any or all consequences and/or losses caused by or through the use or misuse of any item(s) sold through my auctions and/or other sales to the purchaser and/or his agent(s) The safety of this and all item(s) and their compliance with all local. State and federal codes is the sole responsibility of the purchaser. THANK YOU. GOOD LUCK AND HAPPY BIDDING!
|
|
|
9 Machinist Woodworking Files 2 Nicholson Delta Obers Atkins Heller Mixed Set
1-Oberg File half round wrapped handle almost 10 inches heel to point some rust quite sharp I believe it is double cut 3- Heller Files-All 10 inches heel to point 1 is half round no handle some rust quite sharp double cut 2 with handles(one with teeth on the edges the other smooth) both single cut. 1-Delta no handle 14 inches heel to point some rust quite sharp teeth on edges double cut 2- Nicholson no handle both about 10 inches heel to handle some discoloration little to no rust sharp One says Flat Lead Float and is single cut. One says Magicut both have teeth on the edges and flat 1-Atkins 8 inches heel to point Flat Bastard double cut 1-Unbranded 10 inched heel to point a little rust good shape and the finest of the group single cut;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147f24bf2f6-0x110-
|
|
|
Vintage 9 PC LUFKIN Rule Vintage Machinist Caliper Micrometer 2" to 8" in Case
This is a auction is for a Vintage 9 piece set of LUFKIN Rule Vintage Machinist Caliper Micrometer. The item is in a Case. The set is from 2 to 8" The item is in good condition. If you want additional information or pictures please email. We do not accept offers on any items.
|
|
|
Machinist V Block -1&3/4"-x-1&9/16"-x-1&3/8"-Vgc
Machinist V Block-1&3/4"x-1&9/16"x-1&3/8"Vgc Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Machinist V Block-1&3/4"x-1&9/16"x-1&3/8"Vgc Shop made in excellent barley used condition I HAVE MANY GREAT ITEMS LISTED IN MANY DIFFERENT CATEGORIES. I WILL HAPPILY COMBINE YOUR SHIPPING TO SAVE YOU$$ TRACKING NUMBER INCLUDED! I APPRECIATE YOUR BIDS/PURCHASE.rick Last-Minute Bidders And Auction Watchers: Click on this button to send yourself a Remind Me alert to your cell phone. Pager, PDA or e-mail address minutes before the auction ends. It's FREE For All Bidders RemindMe By Summary of Our Selling Policies Payment We accept all credit card payments from PAYPAL.COM only. We do not take credit cards directly over the phone or via E-mail. Payment is due within 7 days of ... moreauctions end SHIPMENT: Shipment usually occurs within 1-2 business days after payment is received and processed. FREQUENCY OF SHIPPING. Monday- Friday Refunds& Returns.i include a tracking number with every U.S. order at no extra cost so you may track the shipping progress on your package.thank you very much for your purchase. order, Contact Me- Communication DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14804f2ba60-0x10a-
|
|
|
BRUBAKER 9/16 - 18 SPIRAL FLUTE HSS CHROME TAP MACHINIST HAND TAP N TOOLS
PRICE IS FOR 1 ONLY BRUBAKER 9/16- 18 SPIRAL FLUTE HSS CHROME TAP NEW LIKE NEW CONDITION I HAVE HUNDREDS OF TAPS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW. REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. INCH TAP DRILL SIZES Recommended tap drill sizes(for approx. 75% thread) INCH SIZES- NATIONAL COARSE- TAP DRILL SIZE SIZE- 1-64#53#2-56#51#3-48 5/64" 4-40#43#5-40#39#6-32#36#8-32#29#10-24#25#12-24#17 1/4-20#7 5/16-18 F 3/8-16 5/16 7/16-14 U 1/2-13 27/64 9/16-12 31/64 5/8-11 17/32 3/4-10 21/32 7/8-9 49/64 1"8 7/8 1-1/8-7 63/64 1-1/4-7 1-7/64 1-1/2-6 1-11/32 1-3/4-5 1-35/64 2"4-1/2 1-25/32- INCH SIZES- NATIONAL FINE- ... moreTAP DRILL SIZE SIZE- 0-80 3/64" 1-72#53#2-64#50#3-56#46#4-48#42#5-44#37#6-40#33#8-36#29#10-32#21#12-28#15 1/4-28#3 5/16-24 I 3/8-24 Q 7/16-20 W 1/2-20 29/64 9/16-18 33/64 5/8-18 37/64 3/4-16 11/16 7/8-14 13/16 1"14 15/16 1-1/8-12 1-3/64 1-1/4-12 1-11/64 1-1/2-12 1-27/64 1-3/4-12 1-43/64 2"12 1-59/64- TAPER PIPE SIZES- NPT- TAP DRILL SIZE SIZE- 1/8-27 R 1/4-18 7/16 3/8-18 37/64 1/2-14 23/32 3/4-14 59/64 1"11-1/2 1-5/32 1-1/4-11-1/2 1-1/2 1-1/2-11-1/2 1-47/64 2"11-1/2 2-7/32 2-1/2-8 2-5/8 3"8 3-1/4 3-1/2-8 3-3/4 4"8 4-1/4- STRAIGHT PIPE SIZES- NPS- TAP DRILL SIZE SIZE- 1/8-27 S 1/4-18 29/64 3/8-18 19/32 1/2-14 47/64 3/4-14 15/16 1"11-1/2 1-3/16 1-1/4-11-1/2 1-33/64 1-1/2-11-1/2 1-3/4 2"11-1/2 2-7/32 2-1/2-8 2-21/32 3"8 3-9/32 3-1/2-8 3-25/32 4"8 4-9/32- I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIR
|
|
|
Dayton Electrical Machinist Tool Box Metal 27" x 13 1/2" x 9" No key
Greetings to all my customers. Please keep in mind that everything I sell we have a limited supply of or we MAY HAVE ONLY 1. This means if you see something that is a really good deal and you can stock up you should. Because once it is gone then it is gone. Also. Please keep in mind that if there is a problem with an item contact me. I will resolve it to your liking. I have a 100% Satisfaction policy I intend on keeping strong:
|
|
|
Vintage Rabone Chesterman No. 9 Machinist Square 9"/20cm BSS 939 (INV 7722)
Up for auction today is a Vintage Rabone Chesterman No. 9 Machinist Square Try Square in Good+ Condition. Nice shape. No pitting or other rust damage. NOTE: eBay calculates shipping costs. Not me. It is based on the item weight and your ZIP code. If the shipping seems crazy, drop me a message and I will calculate it myself and give you a quote. INV: 7722 I buy old tools from estate sales. Collections and auctions and then resell them. Unless otherwise stated, all items are sold in as found condition. I try to describe things a clearly and accurately as I can. It's impossible to be an expert on every tool I come across. So if you spot an error trust that it is unintentional and send me a message, I'll try to correct the listing promptly. Also. If you have some additional information that might be relevant, please drop me a message. ... moreA complete description of my item condition ratings can be found. I only use pictures I take myself. Never a stock photo. What you see is what I will ship. If it's not in the pictures, don't assume it'll be in the box. My photography skills are not great. So if there is a view you would like or some clarification, let me know and I will try to take another shot. If you have any questions or concerns. Send me a message before you bid. I will answer them as quickly as I can, usually withing 24 hours. If. After you receive the item, you are unhappy with it in any way, trust that you are dealing with an honest and reasonable person. Please contact me promptly so I can resolve the matter as best I can. I do try to combine shipping. My complete shipping polices are posted. I take PayPal by preference. Read my complete payment information. Be sure to visit my store: More items added daily! We not only sell tools. We love old tools and their stories. We're members of EAIA( and M-WTCA( and both of these organizations are non-profits dedicated to the study of the tools of America's rich industrial past. Visit their sites and consider joining in if you love tools too! T
|
|
|
9 HSS CLEVELAND CounterBore Bits Machinist Lot Gunsmith Aircraft Lathe Tool Lot
MACHINIST COUNTER BORE LOT 9 PIECE LOT DIA FROM 1 1/32" to 2 1/32" ALL USED IN VERY GOOD TO EXCELLENT CONDITION. HERE IS WHAT YOU GET QTY OF 4 CLEVELAND TWIST 1 3/4" DIA. 6 FLUTE QTY OF 1- 2" DIA- 6 FLUTE QTY OF 1- 2 1/32" DIA- 6 FLUTE QTY OF 1- 1 7/32" DIA- 5 FLUTE QTY OF 1 PUTNAM 15/16 x 1 3/8" 3 FLUTE QTY OF 1 PUTNAM.638 x 1 1/32" 3 FLUTE THANKS FOR LOOKING PLEASE CHECK OUT MY OTHER LISTINGS FOR MORE GAGES AND MACHINE TOOLS
|
|
|
Starrett Outside Micrometer Caliper 436, 8"-9", .001, Machinist, Wood Box, USA
Acquired from a large factory that made home appliances during decades as well as. battleships during WWII. This is a Starrett outside micrometer caliper Model 436 8"9" range Satin chrome finish Hardened ground screw Original wood box Clean. Excellent condition, ready to use Box dimensions: 15 3/4" X 9 1/2" 1 1/2" 1507 grams How we work Please send us your postal/ zip code to obtain a precise shipping cost Shipping cost shown on this page is only an automated estimate We ship everywhere and will provide you with an exact and reasonable shipping cost We will negociate the best shipping price and most reliable options to make sure your item arrives intact at your door We are located in Montreal. Quebec, Canada Expedition costs will increase based on distance and may cost hundreds for larger items We don't charge ... morefor handling or shipping material and we use clean recycled boxes Payment of your item must be completed within 48 hours or we will relist it. If you expect a payment delay. Please contact us Please note that the descriptions are written to the best of our knowledge We are not professional appraisers but do like to learn and be precise
|
|
|
~~~MACHINIST TOOLS 9 VINTAGE SCALES ALL MADE IN U.S.A.~~~
This listing is for 9 assorted scales. All are made in the USA.2 of them have ground areas. CHECK MY OTHER TOOL LISTINGS 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1480cbc1feb-0x11b-
|
|
|
LARGE KENNEDY MC-28 MACHINIST BASE RISER TOOL BOX CHEST 28-1/8 x 9-3/4 x 7-7/8
This large tool chest came out of a wood working shop so there is no oil or grease stains on the felt. Comes with a key and working lock. This is rugged and heavy tool chest. Weights in at 22 pounds. This chest came with a Kennedy 52611 when I purchased it and that base if for sale on my other auction. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction ... moreclose. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
vintage Craftsman Radius Gage set 1/32-17/64" ~ 9-4053 machinist aircraft tool
good condition
|
|
|
5 MACHINIST PARALLELS VARIOUS SIZES and LENGTHS tools *9
There are no matched pairs in this set. Lengths range from 6-7/8- 6 inches. Thickness range from.51- 33, height ranges are 1.27- 5 inches. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy ... moreto send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14810dba781-0xea-
|
|
|
MACHINIST TOOLS PRECISION BRAND TRU PUNCH & DIE SET 9 SIZES 18 PIECES TOTAL
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS PRECISION BRAND TRU PUNCH& DIE SET 9 SIZES 18 PIECES TOTAL ALL PIECES ARE IN VERY GOOD WORKING CONDITION*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN THIS SET* I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT ... moreOUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated.
|
|
|
Starrett 91B Tap Wrench 9” Length, 3/16-1/2” Tap Machinist Mechanic Early Tool
Vintage Starrett 91-B tap handle. No owner engravings! Check out my! Be sure to add me to your! G6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-1481b88df11-0x113-
|
|
|
(#4713) Used Machinist 9/16 Extra Long Morse Taper Shank Drill
Lot 4713 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 4713) Used Machinist 9/16 Extra Long Morse Taper Shank Drill You are bidding on a used. With no manufacturer’s markings on it, Morse taper shank drill. Note: Drill tip is slightly dull and will need to be resharpened! Its features are: 562 of an inch in diameter* 118 Degree Point* High Speed Steel* 2 spiral flutes that are 16 inches in length* 20 inches in O.V.L. Has a No.2 Morse taper shank* Bright Finish I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by Priority Mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 ... morePM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. shipping Wt 1 LBS. Thank You for Looking!
|
|
|
9 HS Countersink Bits with holder Machinist Lot Gunsmith Aircraft Lathe Tool Lot
This auction is for a lot of 9 HS threaded Countersink bits with a threaded holder Made by Schrillo. And others Some of the sizes: 1/2" 8 2 °, 3/8" 90 °. Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures show the items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
SFJ R-4 9 Inch Machinist Live Center (Morse Tapper)
Machinist live center. Swiss Made, 9" SFJ R-4
|
|
|
Starrett 272B Fillet or Radius Gage 9/32-33/64" machinist aviation aircraft tool
MACHINIST/ AEROSPACE TOOL Lot 1- Starrett 272B Fillet or Radius Gage 9/32-33/64" Please click on Hand Tools to the left to view Micrometers to Power tools* or type Starrett in my store search Info: Range(in) 9/32-33/64" Increments 64ths Number of Leaves 16 NOTE: THIS ITEM IS USED and IS IN GOOD- VERY GOOD USABLE CONDITION! THE BODY and THE LEAVES HAVE DISCOLORATION and SURFACE SCRATCHES HERE and THERE. FROM NORMAL USE. THE LEAVES ALSO HAVE SOME minor SURFACE RUST HERE and THERE. THE BODY/BASE/HOUSING HAS minor PITTING HERE and THERE. ALL OF THE NUMBERS ARE LEGIBLE. THE LOCKING SCREWS WORK AS THEY SHOULD. THIS GAGE IS OUT OF AN OLDER CATALOG. NICE LOT/ NICE PRICE YOU WILL NOT BE DISAPPOINTED SQUARE IS FOR REF. ONLY PLEASE VISIT MY STORE! ALL OF MY ITEMS ARE PACKAGED AND SHIPPED WITH GREAT CARE! ALSO DELIVERY CONFIRMATION IS INCLUDED ... moreAND THE TRACKING# WILL BE UPLOADED TO EBAY AND PAYPAL FOR EASY ACCESSIBILITY! THANKS AND TAKE CARE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
MACHINIST TOOL DRILL BIT TAPER SHANK DRILL BIT 9/16", 27/64" DIAMETER {2}
2 Old taper shank drill bits. 9?16" 27/64" diameter, used but in very good condition, Check my other auctions and Ebay store for more taper shank drill bits, chucks, and taper shanks, CAN SHIP SHIP SEVERAL FOR 1 MONEY, machine taps, lathe tool holders, old bottles, Coleman lanterns and parts, I ship within 1 business day, I will be glad to combine shipping, 6.00 shipping, Will ship worldwide,
|
|
|
MACHINIST TOOL DRILL BIT TAPER SHANK DRILL BIT 9/16", 41/64" DIAMETER {2}
2 Old taper shank drill bits. 9/16" 41/64" diameter, used but in very good condition, Check my other auctions and Ebay store for more taper shank drill bits, chucks, and taper shanks, CAN SHIP SHIP SEVERAL FOR 1 MONEY, machine taps, lathe tool holders, old bottles, Coleman lanterns and parts, I ship within 1 business day, I will be glad to combine shipping, 6.00 shipping, Will ship worldwide,
|
|
|
Toolmaker and machinist tooling QUANTITY 9 HIGH SPEED GUN TAPS
IF YOU HAVE QUESTIONS. PLEASE CONTACT ME. WHAT IS WRITTEN ON THE BOX MAY NOT BE WHAT IS INSIDE THE BOX. CLEANING OUT THE GARAGE AND THOUGHT SOMEONE COULD USE THESE. I will combine shipping if you win multiple auctions.
|
|
|
OLD 9/16" OPEN 3/8" HEX MACHINIST WRENCH LATHE TOOL POST CUTTING TOOL APRON LOCK
Old machinist wrench. Open end measures 9/16" Hex measures 3/8" All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Antique 9 Drawer Hand Made Brass machinist Tool chest Old Key Large
Selling this large antique machinist tool chest. The chest has a label indicating that it was owned by Edward Groth. I don't know if he made it. But it is probably handmade. I am not sure of the type of wood, it could be oak or a plywood. The chest is very solid and has brass trim around the edges. The drawers are lined with blue felt, which could be original. I vacuumed the interior so it is fairly clean. One of the 9 drawers does not have a handle to the ring pull. There is a lock and a working key. The dimensions are 23 inches long by 8.5 inches wide by 15 1/2 inches high. The handle on top adds an inch. The chest prior to shipping weights a little under 34 pounds. It is a really nice chest and does have good look to it. Please check out the photos and let me know of you have any questions.
|
|
|
Vintage 1939 "MOORE & WRIGHT" Machinist Feeler Gauge (9 Leaves) - Air Ministry
Vintage 1939"MOORE& WRIGHT" Machinist Feeler Gauge(9 Leaves) Air Ministry Search USE IT! COLLECT IT! 1939 MOORE& WRIGHT Vintage Machinist Imperial Feeler Gauge Air Ministry Mark(9-Tapered Feeler Leaves/Blades) Sheffield. England"Premium Collectible In Great Condition" No Reserve. Low Minimum. Priced To Sell. Acquired in the United Kingdom. This high-quality machinist precision set of tapered feeler leaves has been“used…but certainly, not abused. Used in measuring the gap widths between parts, this 1939 tool was produced under the exacting specifications indicated by the Air Ministry as would be indicated by the distinguished Crown Mark. Hinged together in a set. The holder contains and protects all the numbered leaves. Being very flexible, these leaves can be combined and stacked to form a different thickness. ... morecreate against accidental damage. The separate numbers are the imperial units indicating the number of thousandths of an inch. The nine blades indicated are for sizes: 002, 003, 004, 005, 006, 008, 010, 012, and.015. Currently. Older precision machinist instruments especially those with an age that corresponds to possible past war conflict involvement therefore manufactured under government specification, are very desirable by many discerning collectors, historians, and craftspeople who are fascinated by the intricate craftsmanship and premium quality put into the workmanship by tool manufacturers who have earned the reputation for producing fine tools. Moore& Wright tools are ageless and continue to provide the fine measurements needed in quality metal/wood work. The attached photos provide measurements and display the current positive condition of this durable metal feeler gauge. Note that there are signs of its past use. Storage, and ageing. Using other valuation guides* This vintage 1939 Moore& Wright Feeler Gauge Consisting Tapered Feeler Gauges(9 Leaves/blades) might be graded in a FINE rating in accordance with the criteria: FINE: Tool is completely usable; metal i
|
|
|
Wrench 9/16 1/2 inch open end Vintage tool Welder ? Machinist ?
Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 I have for your buying pleasure one very old used Wrench size 9/16 by 1/2 inch with a 1/4 inch square in the middle. The wrench is 6 inches long and has on it(NO. 135 MADE IN U.S.A. See Pictures SHIPPING The Shipping posted is for continental U.S. and for the eBay Global Shipping Program For other(non-continental US) shipping options. Contact me first. Items are normally shipped U.S.P.S. Foreign Buyers: You are fully responsible for all customs duties applicable in your country. A prompt payment will insure your item is shipped if at all possible the following business day after the item is paid for. I combine shipping when ever possible. Savings and method of shipping will depend on size and weight of items shipped and will be at my discretion. For clarification email ... moreme with any concerns. Any savings will be given to customer. I also work hard to ship items properly. Despite every caution taken things could sometimes go wrong. If there is a problem. Please contact me and I will do my best to resolve it. REFUNDS Even though I offer refunds it is highly advisable you read ad carefully! And study pictures carefully. If the ad and pictures don’t answer your questions please ask for clarification. By emailing me via eBay(contact seller) before bidding or buying. I make every reasonable effort to accurately represent the items I sell and if I make a mistake it would be best to catch it before the sell. FEEDBACK Once you are satisfied with your purchase leave positive feedback and I will do the same for you. PAYMENT EBay request I take Paypal only. From All Bidders. For other forms of payment contact me first. A prompt payment will insure your item is shipped if at all possible the following business day after the item is paid for. If you cannot pay within 3 days please contact me with an explanation. Conformation You will receive an email the day I ship your item Also I may have other items for sell you might be interested in so, Pleas
|
|
|
9/16" Silver and Deming Drill Bit HSS Machinist 1/2" Shank
For Sale is a 9/16" Silver and Deming HSS Drill Bit Used a Few Times- Good Condition Cleaning out the shop and selling individual bits still in boxes Photos show all the bits I will be listing Sizes are from 33/64" to 1" by 1/64" 17/32" is missing OAL is 6" Fluted length of bit is 3" Shanks are smooth(no flats) 118 Degree Point- Black Finish Most are new and will be listed as such I will describe condition of any used bits as I post them for sale I will not take individual pics by size as they are all similar Free Shipping to US Addresses Only Please email prior to bidding if you have questions. Returns only if item differs from description or images. Check out my! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1482a9461d1-0xe6-
|
|
|
Starrett No. 18A Automatic Center Punch 5" Length 9/16" Diameter Machinist Tool
Starrett No. 18A Automatic Center Puch. Punch is in good working condition with some signs of use.
|
|
|
GREENFIELD 9/16 - 27 HSS 4 FLT TAP MACHINIST TAPS TOOLS TOOLING
GREENFIELD 9/16- 27 HSS 4 FLT TAP EXCELLENT CONDITION I HAVE HUNDREDS OF TAPS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW. REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. INCH TAP DRILL SIZES Recommended tap drill sizes(for approx. 75% thread) INCH SIZES- NATIONAL COARSE- TAP DRILL SIZE SIZE- 1-64#53#2-56#51#3-48 5/64" 4-40#43#5-40#39#6-32#36#8-32#29#10-24#25#12-24#17 1/4-20#7 5/16-18 F 3/8-16 5/16 7/16-14 U 1/2-13 27/64 9/16-12 31/64 5/8-11 17/32 3/4-10 21/32 7/8-9 49/64 1"8 7/8 1-1/8-7 63/64 1-1/4-7 1-7/64 1-1/2-6 1-11/32 1-3/4-5 1-35/64 2"4-1/2 1-25/32- INCH SIZES- NATIONAL FINE- TAP DRILL SIZE SIZE- 0-80 3/64" ... more1-72#53#2-64#50#3-56#46#4-48#42#5-44#37#6-40#33#8-36#29#10-32#21#12-28#15 1/4-28#3 5/16-24 I 3/8-24 Q 7/16-20 W 1/2-20 29/64 9/16-18 33/64 5/8-18 37/64 3/4-16 11/16 7/8-14 13/16 1"14 15/16 1-1/8-12 1-3/64 1-1/4-12 1-11/64 1-1/2-12 1-27/64 1-3/4-12 1-43/64 2"12 1-59/64- TAPER PIPE SIZES- NPT- TAP DRILL SIZE SIZE- 1/8-27 R 1/4-18 7/16 3/8-18 37/64 1/2-14 23/32 3/4-14 59/64 1"11-1/2 1-5/32 1-1/4-11-1/2 1-1/2 1-1/2-11-1/2 1-47/64 2"11-1/2 2-7/32 2-1/2-8 2-5/8 3"8 3-1/4 3-1/2-8 3-3/4 4"8 4-1/4- STRAIGHT PIPE SIZES- NPS- TAP DRILL SIZE SIZE- 1/8-27 S 1/4-18 29/64 3/8-18 19/32 1/2-14 47/64 3/4-14 15/16 1"11-1/2 1-3/16 1-1/4-11-1/2 1-33/64 1-1/2-11-1/2 1-3/4 2"11-1/2 2-7/32 2-1/2-8 2-21/32 3"8 3-9/32 3-1/2-8 3-25/32 4"8 4-9/32- I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PARTS. I TR
|
|
 |