|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China 【Balance】⭐Dynamic balance test to every shaper cutters, Precision body balance at high RPM. Designed more than 100,000 shaper cutters.
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States Used but looks new. Gladu Ogee profile Insert Shaper Cutter. 1 13/16 Bore. 3 wing cutter. Smooth Finish. Includes carrying case.Condition is almost new. ... moreShipped with USPS Priority.
Buy It Now
Free Shipping Condition: Used Location: South Bend, United States Delta No. 43-941 ConcaveStyle CarbideTipped Shaper Cutter 3/4”Hole 1/2” Bushing. Condition is Used. Shipped with Standard Shipping.
$5.00 Shipping Condition: Used Location: Norfolk, United States This vintage Delta Rockwell wood shaper cutter bit has a 1/2" bore and 1" width. It is made in the United States and comes in a set of three. These cutter/shaper ... morebits are perfect for woodworking projects and are sure to provide precision and accuracy in your work. The brand is Delta and the unit type is a unit. The supplies type is cutter/shaper bits. This item is a great find for anyone looking to add to their woodworking collection.
Buy It Now
Free Shipping Condition: New Location: Tracy, United States
Buy It Now
$400.00 Shipping Condition: Used Location: Mancos, United States Giant lot of woodworking shapers cutters collars and more.
$8.85 Shipping Condition: New – Open box Location: Holliston, United States New moulding shaper bit. 3/4” bore 3 1/4” diameter. New in box
Buy It Now
$13.60 Shipping Condition: New – Open box Location: Westfield, United States This AMANA TOOL #SC589 Reversible Stile/Rail Ogee CT Shaper cutter is the perfect addition to your woodworking supplies. With a 2-13/32 x 3/4 bore, it ... moreis compatible with a range of machinery.
Buy It Now
$6.99 Shipping Condition: Used Location: Williston, United States Nice shaper cutter by United -- OGEE & Bead Table Edge.
Buy It Now
$9.00 Shipping Condition: Used Location: Washburn, United States SY industrial part # C2159 ¾ ” bore woodworking shaper cutter.
$4.47 Shipping Condition: New – Open box Location: Las Vegas, United States SY Industrial Grade Shaper Cutter Part#C2050 3/4" bore- in box- 1" flute
Buy It Now
$11.60 Shipping Condition: Used Location: Dallas, United States Coast to Coast Industrial C2Cindustrial.com rgnoll@comcast EST. 1998 Offered is a Craftsman Shaper 1/2" Spindle. Unit is in great used condition ... morewith new bearings installed. This complete Spindle Assembly came from shaper model 113-23941. Mfr# 4-75. Included with the Spindle: Drive Pulley. Height Adjust Lever, Spindle Nut Wrenches, Spacer Set, Sleeve Set, Nut& Washer Set. Also Included are 4 used cutters. Thank you in advance for your consideration& Bids on our offering. We are always striving to offer something aside from the standard fare for the needs/ interests of the Business and Private Folk. TERMS Notice* Bid Placement Indicates: You have agreed to the following terms: Buyer pays shipping costs of $15 to Lower 48 US States. Local pickup can be arranged. As well as delivery for a reasonable fee(up to 50mi) Pickup and deliveries can be scheduled Monday through Friday. Saturday pickups require scheduling. Notice* Our Business Hours: 9am- 6pm Monday thru Friday(some Saturdays) Notice* We are Not available on Sundays. Washington State Sales Tax is required and added to all Washington Sales. Unless a resale or manufactures certificate is provided. Payment is expected/ required within 3 days via Paypal& 5 days if via Postal Mail. We do not offer COD. Items are paid in full before shipping. Payments can be made thru Paypal. Shipping to a confirmed address may be required at our discretion. We also accept both business and personal checks as well as certified checks. Wired funding may be accommodated. We do Not take Credit Cards directly. Personal Checks Clear Before Shipping. As do Cashiers Checks(we verify authenticity) We welcome International buyers on many items. Please check with us prior to bidding. A Suggestion for Bidders/ Buyers with Email Filters. Spam Blockers, etc. If you are a bidder&or buyer of one of our items. It will be in your best interest to add our email address to your"Approved" list, otherwise you may not receive our emails. If you don't hear from us within
Buy It Now
$6.09 Shipping Condition: New Location: Lexington, United States This shaper cutter is perfect for creating Passage Entry Door Stile & Rail Sy with ease. Designed with a 3/4" bore, this cutter is suitable for any woodworking ... moreproject. Crafted in Taiwan, this cutter promises durability and reliability for all your woodworking needs. Its brand value adds an extra layer of confidence in its efficiency. Indulge in your passion for woodworking and take your skills to the next level with this high-quality cutter. (This is new old stock in original box).
$14.95 Shipping Condition: Used Location: Spokane, United States Freeborn IC-15-003 insert raised panel shaper cutter.
Buy It Now
$9.50 Shipping Condition: Used Location: Phoenix, United States 1 cutter with 3/4 hole and two 1/2 bushings. Run first piece vertically, Run second piece horizontally.
$16.40 Shipping Condition: Used Location: Middletown, United States Used batteries are variable; they can last a few minutes, or they can last a few hours. • Any item that has been modified without our prior approval. ... moreWe are easy to work with and will always do our best to work out any problems that may occur.
Buy It Now
Free Shipping Condition: New Location: South Bend, United States See you title and pictures. What you see is what you get.
Buy It Now
$11.60 Shipping Condition: Used Location: Hoschton, United States This is a vintage Craftsman 1/2" shaper that comes with 6 bits/cutters. It was manufactured in the United States and is part of the woodworking supplies ... morecategory. The brand of the product is Craftsman.
$6.05 Shipping Condition: New – Open box Location: Fortuna, United States This Delta Milwaukee 35-224 3-Piece Molding Shaper Cutter Set is perfect for all your woodworking needs. Made in the United States, this set is brand ... morenew and comes in an open box. The set includes various cutter sizes to fit your specific needs. Crafted for use in CNC, metalworking, and manufacturing, this cutter set is ideal for woodworking supplies. The set is perfect for creating precise and intricate designs, making it a must-have for woodworking enthusiasts. Don't miss out on the opportunity to have this top-quality cutter set.
Buy It Now
$7.15 Shipping Condition: Used Location: Mifflinburg, United States Sy industrial part # C2003 woodworking shaper cutter. 1/4” bead/roundover profile with 1/2” bore. This edge profile is very versatile and can be used ... morein many different woodworking applications. The cutter was used very little and is essentially brandnew. What you see pictured is what you get. Comes in a box/container with lid and foam liner. BIN or best offer.
Buy It Now
$12.45 Shipping Condition: Used Location: Raymond, United States This BULLNOSE / CONCAVE SHAPER CUTTER has a height of 3/4", a diameter of 4", and a bore of 1-1/8". It is a great addition to your woodworking supplies ... morecollection. The brand is unknown, but it has been manufactured in the United States. It is a used item, but it is in excellent condition.The cutter is perfect for shaping and molding wood. It is a custom bundle of a bullnose and concave shape. It has not been modified in any way, and it is ready to use. This item falls under the Business & Industrial category and CNC, Metalworking & Manufacturing subcategory. Get this reliable and durable cutter now, and make your woodworking projects easier and more efficient.
Buy It Now
Free Shipping Condition: New Location: Cedarhurst, United States V Paneling 2-Piece Shaper Cutter Set. Shaper Cutters. WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance ... moreknown to the State of California to causecancer.
$13.95 Shipping Condition: Used Location: Spokane, United States Freeborn PC-1/4 x 3.26 groover shaper cutter.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of new shaper T-bushings. Bushes your 1-1/4" bore shaper cutter down to 3/4" These have the short flange and will work on any ... more3/4" spindle. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country.
$14.95 Shipping Condition: Used Location: Spokane, United States Freeborn MC-50-010-501-EE cope and pattern set. 6 piece set. 1/4" x 1/2" tongue and groove with eased edges.
Buy It Now
$9.00 Shipping Condition: Used Location: Washburn, United States The cutter looks like it was used very little.
Buy It Now
Free Shipping Condition: New Location: Simpsonville, United States Lg Tooth Width 0.26"/Sm Tooth Width 0.14". SEE INDIVIDUAL PICS FOR DETAILS! Lg Width 0.50"/Sm Width 0.15". Depth of Notch 0.60".
$14.95 Shipping Condition: Used Location: Spokane, United States Freeborn PC-27-020 window sash cope and pattern set. 4 piece set.
Buy It Now
Free Shipping Condition: New Location: China Introducing the Stile & Rail Flooring Cutter Set, perfect for all your heavy-duty woodworking needs! With its durable construction, this set is designed ... moreto withstand even the toughest of woodworking jobs, making it an essential tool for both professional and hobbyist woodworkers alike.
Buy It Now
Free Shipping Condition: Used Location: Raymond, United States Used in great condition window and door profile tooling. Has a 40 mm bore. Zuani LogiFix. 30 mm dado and groove cutter. Carbide is in great shape. From ... morea prestigious window factory in New York.
Buy It Now
Free Shipping Condition: Used Location: Raymond, United States Used in great condition window and door profile tooling. Zuani LogiFix. 40mm bore adapter included. Bead Ogee Roundover cutter. Awesome profile. Carbide ... moreis in great shape. From a prestigious window factory in New York.
Buy It Now
Free Shipping Condition: New Location: Rego Park, United States This T-Slot Milling Cutter is designed for woodworking projects such as door making, stile, rail, and cabinet construction. With a 6T-120mm cut height ... moreand 10mm height, it is made of durable carbide material and manufactured in China. The cutter has a 35mm bore and is ideal for use in CNC, metalworking, and manufacturing industries. The unit quantity is one and it falls under the category of Business & Industrial, CNC, metalworking & manufacturing, and other woodworking supplies. It is an excellent tool for cutting precise slots and grooves in woodworking projects.
Buy It Now
$7.15 Shipping Condition: Used Location: Westover, United States Item is nice and clean complete with the box and a sheet of foam to protect itCheck out my product and save me as a favorite seller. New AUCTIONS listed ... moreevery Saturday & Sunday & often times throughout the week. We have a lot of buy it now with best offers and we run TONs of auctions! Please note we will ALWAYS combine shipping when we can for you, please request an invoice or simply wait until one is emailed. Thank you for supporting me and my small business.T.O.M.CollectiveTons Of Merchandise
$14.95 Shipping Condition: Used Location: Spokane, United States Freeborn PC-10-500-502-EE cope and pattern set. 6 piece set. 1/4" x 5/8" tongue and groove with eased edges.
Buy It Now
$8.70 Shipping Condition: Used Location: Westover, United States Items are in good clean condition Check out my product and save me as a favorite seller. New AUCTIONS listed every Saturday & Sunday & often times throughout ... morethe week. We have a lot of buy it now with best offers and we run TONs of auctions! Please note we will ALWAYS combine shipping when we can for you, please request an invoice or simply wait until one is emailed. Thank you for supporting me and my small business.T.O.M.CollectiveTons Of Merchandise
Buy It Now
$7.99 Shipping Condition: New – Open box Location: Lebanon, United States 1/14” diameter 5/8-11 shankNew Old Stock.I am not sure what Machine these were originally intended for.Wg1sf1rt
$14.95 Shipping Condition: Used Location: Spokane, United States Freeborn IC-15-006 insert raised panel shaper cutter.
Buy It Now
$7.23 Shipping Condition: Used Location: Seattle, United States
Buy It Now
Free Shipping Condition: New Location: China Up for sale is a high-quality shaper cutter with a straight 4-wing design and multiple bore sizes (3/4", 1", and 1-1/4") for versatile woodworking applications. ... moreThis cutter is perfect for professional woodworkers and DIY enthusiasts alike, and is compatible with a range of different shaper machines.
Buy It Now
Free Shipping Condition: Used Location: Raymond, United States Used in great condition window and door profile tooling. Zuani LogiFix. 40mm bore adapter. Small Roundover cutter. Carbide is in great shape. From a prestigious ... morewindow factory in New York.
Buy It Now
$6.99 Shipping Condition: New Location: Nampa, United States IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
Buy It Now
$9.00 Shipping Condition: Used Location: Washburn, United States SY industrial part # C2102 ¾ ” bore woodworking shaper cutter.
$9.00 Shipping Condition: New Location: Columbus, United States This Grizzly shaper cutter (#G1563) is a high-quality tool for your woodworking needs. Made with carbide-tipped router bits, this cutter is perfect for ... morecreating intricate edge profiles on your workpieces. With three flutes, it provides smooth and clean cuts every time. The panel cutter style enhances the versatility of this tool, making it suitable for a variety of woodworking projects. Made in Taiwan, this cutter is built to last and requires minimal maintenance. Whether you're a professional woodworker or a DIY enthusiast, the Grizzly shaper cutter is a reliable choice for all your woodworking needs.
Buy It Now
$15.07 Shipping Condition: Used Location: Seattle, United States Whitehill Spindle Shaper Cutter Block/Cutter Head.
Buy It Now
$9.00 Shipping Condition: Used Location: Washburn, United States SY industrial part # C2084 ¾ ” bore woodworking shaper cutter.
$14.95 Shipping Condition: New – Open box Location: Spokane, United States Freeborn custom bevel detail shaper cutter. 3/4" kerf, never been sharpened. 3/4" depth of pattern for the bevel, with an approximate 1 1/4" overall depth ... moreof cut. From a cancelled custom order.
Buy It Now
$12.00 Shipping Condition: Used Location: Bayonne, United States 4-Piece Door Panel Cope & Pattern Shaper Cutter Set. (3351)You are purchasing what is shown in photos only. All photos are of the actual product(s) you ... morewill receive and are intended to help describe the quality and condition of the piece(s).
Buy It Now
$8.23 Shipping Condition: Used Location: Seattle, United States Shaper cutter head, spindle moulder cutter block. Stamped M.B.1.
$13.95 Shipping Condition: New Location: Spokane, United States Freeborn groover shaper cutter. 3 wings. Carbide tipped, 40 mm bore, 5.00" diameter, 1/4" kerf. Use on solid woods as well as man made products. ... moreThis cutter is from a cancelled custom order. Custom T-bushings can be made by Freeborn Tool to reduce the bore and run on a 1 1/4" or 1.00" spindle. This cutter is in excellent condition and sold"as is" with no returns. We accept Pay Pal. Money orders, cashier checks, or personal checks. If you pay with a personal check. Your item will not be shipped until funds are varified in our account. Thank you for looking.
Buy It Now
$13.60 Shipping Condition: Used Location: Howell, United States Carbide tipped raised panel shaper cutter. Two wing, 5 1/2 inch diameter, 1 1/4 inch bore-currently has a bushing that reduces opening to 1 1/8 inch diameter. ... moreSteel body thickness is 5/8 inch. The rise of the shape is approximately 3/8 inch. The length of the shape is short enough to use for drawer fronts. There is a small chip on one of the wings which is shown in two of the photos, for this reason the price has been reduced. There is still plenty of carbide thickness. Shipping in the continental United States only.
Buy It Now
Free Shipping Condition: New – Open box Location: Jeromesville, United States Grizzly C2314 Rail& Stile 3/4" Shaper Cutter.
$14.95 Shipping Condition: Used Location: Spokane, United States Freeborn PT-10-500-501-EE cope and pattern set. CCW, 3 wings, 1 1/4" bore, Alloy tipped. Alloy tipped for solid woods only, no man made products. 6 piece ... moreset. 1/4" x 1/2" tongue and groove with eased edges.
Buy It Now
$4.43 Shipping Condition: Used Location: Apopka, United States Rockwell Catalog no. 09-131 glue joint shaper with a 1/2" spindle hole. Used but appears in good condition. No chips or burn marks.
Buy It Now
$5.95 Shipping Condition: New Location: Tracy, United States (d) Bore 1/2 & 3/4. (a°) Angle 18.6°. (B) Cutting Height 1.
$20.00 Shipping Condition: Used Location: Meridian, United States
Buy It Now
$4.55 Shipping Condition: Used Location: Hadley, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Wood River, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of new shaper T-bushings. Bushes your 1-1/4" bore shaper cutter down to 3/4". These have the short flange and will work on any 3/4" spindle.
Buy It Now
Free Shipping Condition: New Location: China 【Balance】⭐Dynamic balance test to every shaper cutters, Precision body balance at high RPM. Designed more than 100,000 shaper cutters.
Buy It Now
$13.55 Shipping Condition: Used Location: Prescott, United States Almost all of my pieces are handmade, so they will not be perfect. If an item is improperly described it would not be intentional. 2.7" Dia (69mm) Bottom ... moreTapered to 2" on top. 46" (11.88mm).
|
|
|
|
15 deg. raised panel cutter shaper cutter Katana 3/4" bore
I replaced my shaper with a 1 1/4" spindle model and no longer need this cutter. It is a Katana 15 deg. three winged raised panel cutter in good working shape with no nicks in carbides 5" cutter with 3/4" bore with case. This cutter was $ 95.00 new
|
|
|
Set of 4 Corrugated Crown Moulding Knives Cutter Shaper Moulder
Set of 4 Corrugated Crown Moulding Knives I don't know much about these. Selling them for my boyfriend who had them custom made for a customer who wanted to match their existing moulding. They cost $400 then. If you need me to measure anything just let me know, I will be happy to. See all the picts, there's some samples of wood that the cutters cut so you can see the profile. Thanks for looking!
|
|
|
Delta/Rockwell Moulding Shaper Cutter Knives # 252 Style "C"
Delta/ Rockwell Moulding Shaper Cutter Knives! Catalog# 252 Style"C" Set of three knives.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta/ Rockwell Shaper cutter # D-121, HSS, 1/2" bore ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-121. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A female sash cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta/Rockwell Shaper Cutter # D-139 ,1/2" bore HSS ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-139. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta/ Rockwell Shaper cutter # D-136, HSS, 1/2" bore ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-136. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A cove and bead moulding RH. cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta/ Rockwell Shaper cutter # D-108, HSS, 1/2" bore ! Rare, NOS, Vintage
Delta/Rockwell Shaper cutter# D-108. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e045975d0-0xf5-
|
|
|
Vintage Delta/Rockwell Shaper Cutter Fence # 982 Rare all original !
Vintage Delta/Rockwell Shaper cutter fence. Catalog# 982. In great condition! Old model notice no plastic handles or knobs! All original parts even the fence boards. Fence is fully adjustable. Both halves adjust independently. Also adjusts endwise so opening may be made as small as required for your cutters. Will be shipped disassembled. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Williams and Hussey / Corrugated Shaper / Moulder Profile Cutter Blade Set
William and Hussey/ Corrugated Shaper/ Moulder 3 1/2" Profile Cutter Blade Set For use with shaper or moulder using corrugated head. Template included Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like. This is a moulding I've used with making mantles. Both under the mantle shelf set back from front edge and have also aplied to the front edge to make look like a thicker mantle shelf.
|
|
|
Used shaper cutter DML/FCT Lockedge - set #10 4" X 3" X 5/16"
You are bidding on a used set- very sharp. Excellent condition shaper cutter DML/FCT Lockedge Dimension: 4" X 3" X 5/16"T Label on blade: set#10 New cost over $200 Available for pick up today Call us(978) 399 4850 Shipping: USPS to all 48 lower states: $9.95 Local pick up are welcome and free Please call us 978-399-4850 or e-mail us for additional information Term: Return accepted after 7-days. Buyer responsible for all shipping cost* Please Consider us for all Custom Cabinetry. Bathroom Vanities and Kitchen Countertops MA Custom Kitchen Cabinets. Kitchen Countertops MA, Bathroom vanity Boston MA Concord Kitchens and Baths | New Hampshire Massachusetts custom kitchen cabinetry. Custom kitchen cabinets, custom bathroom vanities, custom bathroom cabinets, kitchen cabinet refacing, entertainment centers, bookcases, home offices, ... moreCustom LG Hi-Macs solid surface countertops, custom LG hausys solid surface countertops, custom LG Viatera Quartz countertops, custom Silestone countertops, custom Granite countertops and more Concord Kitchens and Baths(978) 399-4850 We serve residential and commecial of Massachusetts and New Hampshire Please call(978) 399-4850 for FREE In-Home Estimate Specialized in custom kitchens cabinets Custom LG Viatera Quartz special promotion $47/sqft + FREE sink Custom LG Hausys/ Himacs special promotion $39/sqft + FREE sink Specialized in custom bathroom vanities Special Promotion 20% Off Dimension: 68"72" W X 21"D X 35"H Bathroom Vanity Cabinet: 3/4" Solid Cherry with curved door and 3/4" North American plywood Maple veneer Vanity-top: Your choice of Granite/Quartz/Solid surface(Note: we will pre-drill 6 holes for vanity faucets) Vanity bowls dimension: 17"W X 14"D X 7"H white/bisque porcelain bowls Note: Faucets sold separately Regular Price: $3150 20% Off You Save: $650.00 On Sale: $2500.00 Made in: USA Shipping: local pick up are welcome Daniel Doan MOSO Collection 21" Solid Teragren Bamboo Vessel Bowl Bathroom Vanity
|
|
|
GRIZZLYC2062 Shaper Cutter - 3/4"r Quarter RD(AA9614-1)
C2062 Shaper Cutter- 3/4"r Quarter Round. 3/4" Bore THESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2102 Shaper Cutter - Door Lip (AA9632-1)
C2102 Shaper Cutter- Door Lip(Counter-Clockwise Rotation) 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2097 Shaper Cutter - Ogee Moulding, (AA9611-1)
C2097 Shaper Cutter- Ogee Moulding. 3/4" Bore THESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2091 Shaper Cutter Bead&Cove (AA9618-1)
C2091 Shaper Cutter- Bead& Cove. 3/4" Bore THESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2060 Shaper Cutter - 3/8"r Quarter (AA9646-1)
C2060 Shaper Cutter- 3/8"r Quarter Round. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2054 Shaper Cutter - 1/2" Bead, 3/4 (AA9645-1)
C2054 Shaper Cutter- 1/2" Bead. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2053 Shaper Cutter - 3/8" Bead, (AA9631-1)
C2053 Shaper Cutter- 3/8" Bead. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2049 Shaper Cutter - 3/4" Flute, (AA9641-1)
C2049 Shaper Cutter- 3/4" Flute. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2046 Shaper Cutter - 1/4" Flute, (AA9655-1)
C2046 Shaper Cutter- 1/4" Flute. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2034 Shaper Cutter - 1" Rabbeting, (AA9629-1)
C2034 Shaper Cutter- 1" Rabbeting. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2033 Shaper Cutter - 3/4" Rabbeting,(AA9627-1)
C2033 Shaper Cutter- 3/4" Rabbeting. 3/4" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GRIZZLY C2014 Shaper Cutter - Glue Joint, (AA9647-1)
C2014 Shaper Cutter- Glue Joint. 1/2" Bore T HESE TOOLS ARE USED BUT ARE IN GREAT CONDITION If you are unsatisfied with your purchase. Please contact us and we will take steps to make it right. Customer satisfaction is our first priority! Check Out Our! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 Lipped 1/2" Radius Carbide Shaper Cutter
This auction is for a 3 Carbide 1/2" Radius Cutter. 1-3/8" High x 3-1/2" Cutter Diameter x 3/4" Spindle Bore Fits 3/4" shaper spindles. 1/2" Spindle with Bushing) Estimate maximum speed 20000 rpm. Weighs 2 lb. Contains 3 1/8" x 1-3/8"x 1" Carbide Cutters. Newly sharpened I ship within US by USPS with delivery confirmation. I will ship to international buyer only upon confirming shipping charge and sending an invoice to the buyer. I have my items ready for shipment when auction has ended to ship when payment is made. I prefer Paypal for quick service and shipment. I will accept other forms of payment. But will not ship item until payment has cleared. I want every one making a purchase from me to have faith that all item descriptions will be honest and complete as possible. Please pay within 7 days ... moreof the end of auction. A 2nd invoice will be sent on day 3 and a NON-PAYER BIDDER STRIKE(which I have never used) may be placed with Ebay on the 7th day if payment has not been made. If you are having a problem. Please let me know so we can work it out to everyone,s satisfaction. Please email with any questions or concerns before placing your bid. FEEDBACK NOTES are important for the buyer as well as the seller. I have always left a POSITIVE feedback for the buyer as soon as quick payment is received. I will send a personal email thanking them for their payment and advise of shipping status. PLEASE LEAVE A POSITIVE FEEDBACKS AFTER RECEIVING YOUR PURCHASE. I will not leave negative feedbacks unless it is a last resort. Thank you for looking and keep watching for more great items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e3f83de4b-0x106-
|
|
|
Delta/Rockwell Shaper Cutter # D-124 ,1/2" bore HSS ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-124. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta/ Rockwell Shaper cutter # D-123, HSS, 1/2" bore ! Rare, Vintage
Delta/Rockwell Shaper cutter# D-123. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A cabinet R.H. male cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e4ea20f4d-0xf5-
|
|
|
Woodworking Shaper Carbide Cutter 1-1/4" Bore 1" Tapered Cut 3/8 - 1/2" LRH?
This it a good condition. Used carbide cutter for a shaper with a 1 1/4 inch spindle. All of the knives edges are in good shape. It could possibly be made by LRH but that is unknown. Knives are 1-1/4 in long, and start cutting at 3/8" and taper up to 1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any ... moreitem requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities
|
|
|
Custom 2 Insert Shaper Cutter Head
This auction is for a 2 Insert Molding Cutter Head. 2-1/2" High x 4" Cutter Diameter x 1" Spindle Bore Fits 3/4" shaper spindles(With Bushing) Estimate maximum speed 12000 rpm. Weighs 2.7 lb. Contains 2 Interchangeable 1/4" x 1-1/2"Cutters. Current inserts are Door Lip I ship within US by USPS with delivery confirmation. I will ship to international buyer only upon confirming shipping charge and sending an invoice to the buyer. I have my items ready for shipment when auction has ended to ship when payment is made. I prefer Paypal for quick service and shipment. I will accept other forms of payment. But will not ship item until payment has cleared. I want every one making a purchase from me to have faith that all item descriptions will be honest and complete as possible. Please pay within 7 days of the end of ... moreauction. A 2nd invoice will be sent on day 3 and a NON-PAYER BIDDER STRIKE(which I have never used) may be placed with Ebay on the 7th day if payment has not been made. If you are having a problem. Please let me know so we can work it out to everyone,s satisfaction. Please email with any questions or concerns before placing your bid. FEEDBACK NOTES are important for the buyer as well as the seller. I have always left a POSITIVE feedback for the buyer as soon as quick payment is received. I will send a personal email thanking them for their payment and advise of shipping status. PLEASE LEAVE A POSITIVE FEEDBACKS AFTER RECEIVING YOUR PURCHASE. I will not leave negative feedbacks unless it is a last resort. Thank you for looking and keep watching for more great items.
|
|
|
Assemblage of Molding Cutter and Shaper Blades Woodworking Tools
This is an assemblage of 12 molder or shaper blades for crafting profiles into molding. They are used- but generally in good shape. Some are sharp- some need a little work. This is a nice little assemblage of sharps for making stuff. The smaller ones have a 17/32 arbor and the large shaper is 1 1/16" Happy cutting. We ship within 1-2 days of purchase. Thank You 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e9e7e2785-0x103-
|
|
|
Vintage Wards "Powr-Kraft" Shaper Cutter Blade No. 84-2494 in Original Box
Vintage Wards"Powr-Kraft" Shaper Cutter Blade No. 84-2494 in Original Box You are bidding on a vintage Wards"Powr-Kraft" Shaper Cutter Blade No. 84-2494 in the original box. In very good, used condition. This is a high speed steel blade made for Montgomery Ward by Rockwell Delta Manufacturing Company. This blade is in the original box which bears the part number and shows the profile of the cutter. This cutter blade has a 1/2" bore arbor hole and a 1 1/4" profile height. The box measures 2 1/8" by 2 1/8" by 1 1/2" and has no torn or missing"flaps" Please see all of the photos for the condition of this item and judge for yourself. I f you need additional information or have questions. Please ask before bidding. Your purchase will be carefully and securely packaged. And in most cases will ... morebe shipped the next business day after your payment is received. All Weights and Dimensions are Approximate. On Dec-09-12 at 11:09:56 PST. Seller added the following information:
|
|
|
2" R Roundover w/ 2" Flute & 1/2" Shank Shaper Cutter Carbide
ONE 2" R ROUNDOVER 2" FLUTE 1/2" SHANK SHAPER CUTTER You will receive 1 USED 2" R ROUNDOVER w/ 2" FLUTE& 1/2" SHANK SHAPER CUTTER. It is in Used but Very GOOD Condition.The Carbide knives are in almost New Condition.It comes in the box in was bought in.It has number 403-5960( this might not be Box it came in)Not sure who made it but Byrom International corp.Chardon,Ohio 44024 is stamped on box.It measures 3 1/2" wide x 1 3/4" x 4 5/8" tall. Shipping is by $7.50 by Priority Small Flat Rate Mail.Please PAY within 4 Days of Auctions End or a Non-Paying Bidder form will be Filled with Ebay.E-mail with any Questions. NO International Shipping. Have othe SHAPER Cutter`s on auction so I Will Combine Shipping but it might go Parcel Post Mail then just e-mail for combine Shipping Charges.
|
|
|
Grizzly Shaper Cutter G1585 Raised Panel
Raised Panel Cutter Grizzly model G1585. 1-1/4' Bore. Carbide Tipped.
|
|
|
Grizzly Shaper Cutter tongue and groove G1717 3/4'' bore
Grizzly Shaper Cutter. Model G1717. Cuts tongue and groove for joints. 3/4' bore
|
|
|
Large Lot of 40 Plane Shaper Moulder Cutter Blades Weinig Brown Lietz Rockwell
Not sure what these are. From a friends father's estate. This is a lot of 40+ metal woodworking blades. Each one a different profile. They are all 3" long and range from 3/4" to 4 1/4" wide. Have sat a long time and would need to be cleaned up before use. Only one has a name on the back- Brown of St. Louis. Happy bidding. A lot of tools!
|
|
|
1/4" Dado Shaper Cutter (1.125" bore)
This auction is for one used 1/4" Dado Shaper Cutter. The arbor bore measures 1.125" and the cutters measure 1/4 inch. There are some small chips in the carbide cutting tips. These small chips should be able to be removed during re-sharpening. In order to expedite shipping. Payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you!
|
|
|
1/4" Dado Shaper Cutter (40mm arbor bore)
This auction is for one 1/4" Dado Shaper Cutter. The arbor bore measures 40mm and the cutters measure 1/4 inch. In order to expedite shipping. Payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you!
|
|
|
FREEBORN 1" PANEL DOOR SHAPER CUTTER 5 PC BIT SET 3/4" ARBOR
FREEBORN 1" PANEL DOOR SHAPER CUTTER 5 PC BIT SET 3/4" ARBOR FREEBORN 1" PANEL DOOR SHAPER CUTTER 5 PC BIT SET. THESE ARE LIGHTLY USED BLADES THAT ARE IN EXCELLENT WORKING CONDITION. ALL BLADES ARE VERY SHARP. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California ... moreresidents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
FREEBORN 22 1/2° SHAPER CUTTER BIT 3/4" ARBOR WOOD WORKING TOOLING
FREEBORN 22 1/2° SHAPER CUTTER BIT 3/4" ARBOR WOOD WORKING TOOLING FREEBORN 22 1/2° SHAPER CUTTER BIT 3/4" ARBOR. THIS IS A LIGHTLY USED BIT THAT IS IN EXCELLENT CONDITION. IT IS VERY SHARP. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents ... moreare subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
FREEBORN RAISED PANEL DOOR SHAPER CUTTER 3/4" BORE
FREEBORN RAISED PANEL DOOR SHAPER CUTTER 3/4" BORE FREEBORN RAISED PANEL DOOR SHAPER CUTTER 3/4" BORE. THIS IS A LIGHTLY USED CUTTER THAT APPEARS TO BE IN EXCELLENT WORKING CONDITION. IT IS SHARP. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents ... moreare subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
FREEBORN STRAIGHT SHAPER CUTTER 3/4" BORE FREEBORN CUTTING HEAD
FREEBORN STRAIGHT SHAPER CUTTER 3/4" BORE FREEBORN CUTTING HEAD FREEBORN STRAIGHT SHAPER CUTTER 3/4" BORE. THIS IS A LIGHTLY USED CUTTING BLADE THAT APPEARS TO BE IN EXCELLENT WORKING CONDITION. IT IS SHARP. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California ... moreresidents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
FREEBORN PANEL DOOR COPE & STICK SHAPER CUTTER 3/4" BORE
FREEBORN PANEL DOOR COPE& STICK SHAPER CUTTER 3/4" BORE FREEBORN PANEL DOOR COPE& STICK SHAPER CUTTER 3/4" BORE. THIS IS A LIGHTLY USED SET OF BLADES THAT ARE IN EXCELLENT WORKING CONDITION. THEY ARE VERY SHARP. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified ... moreus.California residents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
Delta Rockwell Shaper Cutter Collars 22 total - 1/2" bore
22- Delta/ Rockwell Shaper cutter collars. All are a 1/2" bore. A large set. Everyone is a different size. A must for your shaper.
|
|
|
MOLDING SHAPER CUTTER HEAD. IN BOX, NO CUTTER BITS
MOLDING SHAPER CUTTER HEAD. IN BOX. NO CUTTER BITS. MOLDING SHAPER CUTTER HEAD. IN BOX. NO CUTTER BITS. Looks to be unused. Measures 3 5/8" in diameter and 7/8" thick. Thanks for viewing. 713-8637-55. We are constantly adding new items daily Re-Purposing and Renewing Vintage items Our Pickers work hard to find. and bring back to market. Unique items Subscribe to our Ebay store NOW and stay informed daddysgarage2012 is our seller Id Semi Monthly Updates emailed directly to your email address LOW PRICES Vintage and Antique ALWAYS LOOKING FOR THE BEST OFFER VISIT OFTEN The small details Almost all our items listed are used unless noted There might be small scrapes. Scratches or surface issues not mentioned in the main description but expected with used products. We will do our best to describe this item and any faults that it may have. ... moreItems your bidding on are sold"As Is" Should you have any questions about this item please ask questions before bidding. Please check out photos and ask us any questions if you need clarification on one of our products Our photos can lighten up or whiten some of our items. If an item is yellowed we will mention that in the information We will accept returns as long as the winning bidder notifies us within 24 hours of receipt with complaint THANKS for viewing and GOOD LUCK- Our Inventory is constantly changing with new additions so be sure to add our store as a favorite for more great items! PAYMENT FOR ITEMS WON. As with any contract. Please take the time to read the auction carefully. If you have any questions or do not agree to anything, please contact us prior to bidding. We apologize to serious bidders who make eBay the enjoyable experience it is. We have had to add this because of non-paying bidders. We accept Pay Pal and Payment is expected within 3 days of winning the auction. If you require more time please let us know! Without notification within the 3 days. We will be required to file a notice of non-payment in order to be eligible to re-list this item. S
|
|
|
Delta Milwaukee Rockwell 3-Knife safety shaper cutter head # 43-344 or 1343
This is a early Delta Milwaukee three knife shaper cutter head. It is No. 1343 later sold as No. 43-344. It is in good condition with some tarnish and a few scratches to show for years. The arbor hole is 3/4" and is in good shape. It comes with four sets of cutters. The set in the head is set 35-104 straight 1" and is used and looks to have had some relief ground on the edges. Also includes is a set of 35-227 Flute Bead. Quarter Round, Ogee Combination in a 35-228 box, this set appears unused. The next set of cutters is marked MC-247 Door Lip(used) and the last set is MC 192 a Triple Bead and appear lightly used. This is a nice working head for your shaper and Delta made many other cutter profiles over the years that will work with this head. I ship fast usually the first business day after payment. I love to combine shipping so ... morecheck out my other listings of quality tools. You pay only the actual combined shipping cost. I try to make accurate descriptions with both words and pictures. If after receiving a item you feel that the listing was inaccurate, please return it for a refund. Thank you!
|
|
|
Amana Tool Shaper Cutter- Corner Triple Bead
This Amana SC624 Corner Triple Bead shaper cutter was purchased new to sample trim for a client who opted for a different profile. Hardly used. No flaws, nicks or corrosion. 3/4" Bore. Outside Diameter 2 5/8" Cutter Height- 7/8" Bead Radiuses- 3/16"
|
|
|
Freud Shaper Cutter Raised Panel UC202
I purchased this Freud raised panel cutter new for 1 job and it has been in my blade cabinet ever since. It's probably run about 40 door panels. Has no nicks or damage or corrosion of any kind and is perfectly sharp. 3/4" bore, designed for 5/8" panels but I used it for my 3/4" panels, running the back cut separately.
|
|
|
2 Shaper cutterhead cutter head with cutters 5/8 bore
I have owned these cutter heads for many years and never used them. they both have bits in them that are sharp. the dark colored one(steel) is 4" dia and the aluminum one is 3.3/4" dia. 5/8 bore. e-mail with any questions payment expected in 72 hours or negative feedback will occur. shipping to the lower 48 only.
|
|
|
Nice Lot of 15 Assorted Wood Router Shaper Cutter Bits Knives 1/2" Bore
Selling With No Reserve! Hi! I have for Auction here a lot of 15 assorted Shaper/Router Cutter Knives/Bits. 1/2" Bore. They all look like they are in decent condition. See Pictures. Get yourself a great deal here. NOTE: I add a $1.50 on all my Priority Mail& $2.00 on regular packages for handling and supplies plus the 9% that eBay charges me on shipping(which is already included) I have people leaving low DSR's on shipping cost's and I really need you to decide that it is okay to pay the shipping that I have on here before you bid or don't bid on my items. Low DSR's cost me a lot as it won't bring me up in search results as quick and I also loose a 20% discount off my eBay fees. I'm selling on eBay to make a living for me& my family and I can't do the shipping for nothing. I realize that shipping prices ... morejust went up again with shipping companies but it can't be taken out on the sellers. Thanks for understanding Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresen
|
|
|
Vintage Delta Milwaukee 27 Piece Shaper Cutter Set w/ Box Model #980 Made in USA
You are looking at a Vintage Delta Milwaukee 27 Piece Shaper Cutter Set w/ Box Model#980 Made in USA. Detailed condition information: The item is used with some signs of wear The item is made by Delta Milwaukee The item is Vintage The item is a 27 Piece Shaper Cutter Set The item includes original wooden box! Made in USA Model#980 The item includes 18 Various cutters The item includes 8 collars The item includes 1 spindle Great for woodworkers The item is great for home or commercial use! The item functions as intended. Please go over the information we have provided on this item. And review the images for a detailed look at what you are buying. If you have any questions regarding this item or would like more information, please contact us. Purchase with confidence in our items. The Tool Box Co stands behind our customers. Please do not hesitate ... moreto contact us, visit our store page: http:stores.ebay.com/The-Tool-Box-Co for more information. We put customer service above all else and will do our best to make you a completely satisfied and returning customer. Store Policies Condition: We take pride in the quality of the items we sell. All of our items are tested and described to the best of our ability. All of our items are sold as is with no warranties expressed or implied. Please see item description for clarification. Be sure to read our listings thoroughly to make sure you understand what you are buying. Payment: Please send your payment within 7 days of the listings end time. This allows us to make sure we can get your purchase to you faster. And this makes the process run smoother for both parties. We accept payment via PayPal only please. We do not ship outside of the United States, please no international orders, sorry. Shipping and Handling: All of our items are shipped quickly and securely to make sure they arrive to you in the same way they are shipped. We will provide delivery confirmation on all of our items. This helps us, and helps you by seeing when the item arrives and lets you see when to exp
|
|
|
DELTA ROCKWELL 1182 SHAPER CUTTER AND COLLARS SET MILWUAKEE USA 1/2" HOLE
HERE WE HAVE A DELTA SHAPER CUTTER SET. NO. 1182 1/2" HOLE MADE IN THE USA. GOOD USED SHAPE. NOT SURE IF ITS COMPLETE, WHAT YOU SEE IN THE PICTURES IS WHAT YOU WILL GET. NO LID FOR THE BOX. LOOK AT THE PICTURES. PLEASE ASK IF YOU HAVE QUESTIONS. PAYMENT WITHIN 48 HOURS OF AUCTION ENDING. THANK YOU. AND PLEASE LOOK IN MY STORE FOR MORE GREAT TOOLS!
|
|
|
Vintage Sears Roebuck & Co Drop 3022 Leaf Bead Shaper Cutter 1/2" Spindle Blade
This is a vintage Sears Craftsman by Sears Roebuck& Co Drop Leaf Bead Shaper Cutter Blade. The model number is 3022 and it is for a 1/2" Spindle. Box also says"D 09" This was made in the USA of high speed steel. I do not know anything about this. And am only going by the information on the box. This comes in the original box which is slightly torn/beat up and rusty. The blade seems to be in good condition but it is rusty in places. Can probably be cleaned up? I assume this has been used as I can see super tiny marks/indents if I look very closely. No major damage except rust. Being sold as-is. Please view all images and bid accordingly. Blade measures about 1.5" at the widest point across the blades. It has a 1" tube/body with inner hole diameter of.5" 1/2" Box measures 2.25" x 2.25" x 1.1" ... morePlease see photos for additional detail and feel free to ask questions. Store: G3 Our customer's satisfaction is our top priority. In the event you experience any problems with your order. Please contact us prior to leaving a negative or neutral feedback and we'll be sure to offer a speedy resolution to any issues that may arise. PAYMENTS o Paypal is the only method of Payment we accept. No exceptions can be made. o Payment must be received within 7 days of the auction's end. o Items left unpaid for more than 7 days are eligible to be relisted or have an unpaid item claim filed. SHIPPING o This item will be shipped via UPS Mail Innovations. o Please be aware of our shipping charges prior to placing a bid. o We do offer combined shipping on up to 5 items. Please email after the auction's end requesting a revised/ combined invoice. o Requests for combined shipping will be handled on a case by case basis. It may not be possible to combine certain larger items if we feel it may jeopardize a safe arrival. o Any item sold by the Seattle Goodwill is eligible for a scheduled local pick up at our warehouse 7 days a week between the hours of 9 a.m. and 4 p.m. Please n
|
|
|
DELTA MILWAUKEE ROCKWELL CUTTER HEAD 3-KNIFE BLADES 2 HEADS SAFETY CUTTER SHAPER
MORE PHOTOS BELOW A lot of 2 cutter heads and several blades. I know very little about these so please ask any questions. The heads measure approx. 4"dia. Blades are about 1"w. Condition: Items have wear from use. I don't see any breaks or cracks. See all photos below! Before bidding look at all the photos. Ask questions and have a good grasp of condition because most of what we sell is used, not new. Thanks. We have lots of antiques& glassware listed- check our other auctions We're always happy to combine multiple purchases to save on postage. Please wait for an invoice before paying if you buy multiples to make sure you receive combined shipping discount. ~ We charge actual shipping ONLY- no handling fees!~*We accept Paypal. Payment is expected within 4 days. Thanks! We do not use First Class International. We do not ... morefalsify customs forms. Buyers are responsible for applicable duty and customs fees. We charge actual postage only- no handling fees! 14-day return privileges less shipping charges. Our sticker or invisible mark must remain intact and the item must be returned in the same condition it was sent. ~ Yes! We are always happy to combine multiple purchases!~ Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 1 ~ Leitz Finger Joint Shaper Cutter 22481 WF 600-2 140x40x30 1-1/4" Bore
Today's Auction Specialized. Hard to Find, Bulk Quantities and Dirt Cheap Prices on Electrical, Fasteners, Tooling and Hardware. Lot of 1 ~ Leitz Finger Joint Shaper Cutter 22481 WF 600-2 140x40x30 1-1/4" Bore. We are listing several lots of tooling this week from the same woodworking factory so please check our other auctions. Please use the zoom feature to review pictures for details. Shipping Please take advantage of Combined Shipping on fasteners and hardware.We take full advantage of the USPS mantra"If It Fits. It Ships" We ship all items next business day. All Orders over $100 ship free Combination Orders are what we do Best. Fasteners& Hardware.Store Inventory. Buy It Now Listings. We consider packing& shipping an art form. Even though we weigh and cube each item listed. We can almost always save money using ... morea wide array of flat rate boxes. Each item is calculated in multiples to save time at checkout. Feel free to mix& match. If your shipping charges do not appear fair. Please select"request total from seller" before paying and we will send you a new invoice with exact shipping. You will never pay more than $14 shipping on any combination order less than $100 and Free shipping after that. Our customers are now getting their"MBA's"Mixed Box Advantage! Please select"request total from seller" at checkout if your order total is $100 or more. About Us 2farmin sells in many categories of new and used items including collectibles. Hardware, reclaimed pieces, antiques, lighting, farm stuff and closeouts. We know what it is like to have to make good deals to make your money stretch. We take pride in our reputation as dependable and accurate sellers with the ability to ship all items at a fair price and well packaged. To that end, please send us an email to request volume pricing and additional information. We acquire our inventory items from Farm. Factory& Business closeouts all over the USA. Please take time to view our other listings for more
|
|
|
Vintage Aladdin Shaper Cutter With 6 blades/ 12 dif cuts / Original Box
Hi this is a Aladdin wood shaper This mounts on any drill press. The blades have two different cut on them, The paper work is with this, All the blades are like new I do not think this was ever used at all, Look at the pic. This would make a good set to any one who is in to wood working, 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-140a58b0351-0x104-
|
|
|
Woodworking shaper Blade 2" Wide 6" Diameter 1-1/8" Hole Wood Cutter Tool
This is a Good used blade. But probably will need to be sharpened before use. The actual diameter is 6.043" The main steel body thickness is 1-1/2" each blade is 3/8" thick We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international ... moreshipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
|
|
|
Oppold adjustable bevel Shaper cutter
This cutter is very professional and is manufactured by Oppold in Germany and they make some really elaborate stuff. The cutting edges are carbide inserts in an adjustable bevel angle holder. adjustable from 0 to 50 degrees either direction. A truly beautiful pc of machining. 6 1/2 Diam. 1 3/4 cutting edge, 1 1/4" bore. Max RPM 8k it is well used and may need new inserts.
|
|
|
Wood Shaper Cutter SC 2064
Carbide Shaper Cutter SC 2064. Unsure of exact style as I'm not very experienced in woodworking
|
|
|
Wood Shaper Cutter SC 2065
Carbide Shaper Cutter SC 2065. Unsure of exact style as I'm not very experienced in woodworking
|
|
|
1/4" Rabbit/Dado Shaper Cutter (40mm arbor bore)
This auction is for one 1/4" Rabbit/Dado Shaper Cutter. The arbor bore measures 40mm and the cutters measure 1/4 inch. In order to expedite shipping. Payment through PayPal is appreciated within 24 hours of the end of this auction. Please contact me if you have any further questions. Thank you!
|
|
|
Shaper cutter pair,1 3/4" radius with 1" X 3 1/2" Dia. rubcollar Bearing
Shaper cutters are high speed steel in good condition very sharp with lock edge- 1 3/4" radius cutting edge in excellent condition. Lock edge rub collar set has piloted bearing on bottom of set. very good condition and only slight surface rust. 1 1/4" bore
|
|
|
Shaper tooling cutter head knife STEHLE 10000 RPM 100 x 60 x 1 1/4 shaft 31.75
Welcome to our auction. For over 45 years Pruitt Machinery has proudly been an accomplished supplier of New and Used machinery and parts to the woodworking industry. UP FOR AUCTION One Stehle Shaper head 100 x 60 x 1 1/4 31.75 shaft 10.000 RPM The head is a little rusty from sitting in the bottom of a steel cabinet as is. SHIPPING AND TERMS After the auction ends we will send you an email asking for your delivery address. Once we have your delivery address we will provide you with an invoice which will include the final price of the auction and the actual shipping charges to your delivery address. Do not pay anything until we have sent you a final invoice. After you have received the invoice you have three days to pay the invoice. Payments that haven't been made within 3 days of your invoice will automatically NULL AND VOID your auction. ... moreThe item will be relisted and you will be considered a non paying bidder. We ship every business day except normal holidays so once your payment clears we will ship your item the same day or the next business day. We will supply you with the tracking information of your shipment. We normally ship UPS. You may pick your item up at any time after payment at our place of business. Please let us know in the initial contact if you desire to pick your item up and save on the shipping. We are open 8:30am to 5 PM weekdays. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641 RETURNS All returns accepted! The buyer should contact us within 14 Days after receiving the item if you wish to return the item. We will provide you with a RA number to include in the packaging. The item must be returned in the same condition as it was shipped otherwise there may be charges. Your refund will be given as Money Back. The return shipping shall be paid by the buyer. The buyer has 14 days to return the item once given the RA number. After the item is received and inspected the refund will be released back to the buyer. PAYMENT We accept a wide variety of payments. The fastest ways of payment
|
|
|
Vintage Delta shaper Cutter Holder and Blade
In good condition. 3/4" center, blades sharp
|
|
|
Shaper Cutter Craftex 3 wing Carbide for Raised Panel Profile
Please note the damaged/missing portion of the carbide on the one wing. The cutter has an outside diameter of 5" and is for a 3/4" shafts. A bushing is required for 1/2" shafts
|
|
|
Freud Raised Panel Shaper cutter with extras
Manufactured by Freud in Italy. In good condition. Never abused. This is a raised pnl cutter that is a straight edge bevel and ends as a small bead at the end of the cut. 5 1/2 diam. And a 1 1/4" bore Also Part of the set is 2 extra cutters that make a nice Stile and rail configuration but I think there are probably a 1/4" slot cutter and a pilot bushing missing. They are also 1 1/4" bore so I think they were a set. Im throwing them in. AS IS.
|
|
|
SY C2054 Shaper Cutter - 1/2" Bead, 3/4" Bore
This auction is for one used SY Shaper Cutter#C2054- 1/2" Bead. 3/4" Bore. This cutter is in good used condition, has never been sharpened, and has plenty of carbide remaining. This item is being"sold as is. Please contact me if you have any questions. In order to expedite shipping, please make payment via PayPal within 24 hours of the end of this auction. Thank you!
|
|
|
A & H Industries Shaper Molding Head Blade Cutter 1.H-279 T-2065 24E
A& H Industries Shaper Molding Head Blade Cutter 1.H-279 T-2065 24E PLEASE NOTE: In Accordance with Ebay Rules. We must state that these products are not covered by any manufacturer’s warranty. Otherwise we will not be allowed to list them. I am in NO WAY affiliated with A&H Industries or any of their partner companies. What I know about this unit: It came to us at the auction of the recently closed Cabinet Manufacturer in WVa It was removed directly from the supply room shelf. They have were placed on out shelves and we must be a lot more humid than what they were use to as. Minor areas of surface rust started to appear. Judging by the protective"plastic dip" on the blades. One can assume it has been sharpened and is"ready to go" This was engraved on the unit: A&H Industries Meyerstown. PA 1.H-279& T-2065 ... moreThis area of woodworking is NOT my strong suit. If you can let me know how to better market this unit. Your input will be appreciated. Please read the following information carefully so that both of us can have a great eBay experience! Our Terms and Conditions Item Descriptions. We make every effort to describe our items carefully and accurately. We post all the information we have in the item description. Please notice any attributes and specifications in the item description and look at all pictures carefully. We post all the information we have in the item description. It is the buyer’s responsibility to research the item further if necessary. We are not electricians. Plumbers nor engineers, so we truly will not have any more information that what is included in the listing. When you bid on an item in an auction. Or you commit to buy in a“buy it now” sale, you have entered into a contract. Non-paying buyers will be reported to eBay and may be blocked from future purchases. Prices are firm. Please do not make an offer for a lesser amount unless a“best offer” option is indicated in the listing. Payment for the item is due within 5 business days of the sale. We prefer Paypal.
|
|
|
10" DIAMETER SHAPER MOLDING HEAD BLADE CUTTER
10" DIAMETER SHAPER MOLDING HEAD BLADE CUTTER Click Images to Enlarge IMG_4037 IMG_4038 SHAPER MOLDING HEAD 10" DIAMETER COMES AS SHOWN IN PHOTOS NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Payment Options: PayPal Shipping Options: Weight based Shipping Charges. UPS Ground. USPS Priority Mail International, FedEx Ground® I will ship to: USA and Internationally[Weight] 18 lbs. Shipping and Handling: Sales Tax] 10.25% for in-state buyers Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. Other: PLEASE CALL FOR OTHER PAYMENT TYPES Seller is to receive ... morepayment within 5 days of end of auction. High bidder must pick up or schedule loading out within 7 days of auction end. Storage fees will apply after 2 weeks. Our business hours are Monday thru Friday 8:00 AM to 3:30 PM PST. Our address is 14911 Don Julian RD. Industry.CA 91746. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. NOTE: We reserve the right to reenlist any item. Immediately if buyer cannot adhere to the conditions and time frame previously mentioned. For additional inquiries email 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm&
|
|
|
Katana Shaper Cutter 11092. Barely Used. Nice.
Nice barely used Katana 11092 shaper cutter. Raised panel cutter. Posted with
|
|
|
Delta Rockwell Craftsman Atlas ? Shaper cutter hold downs
Delta. Rockwell, Atlas, Craftsman? Shaper cutter hold downs. Great for running long work. Also works on table saws and band saws. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Craftsman Shaper Cutter 1/2" bore # 3289 rabbet/dado cutter, HSS.
Craftsman Shaper Cutter 1/2" bore. HSS. Catalog# 3289. A 1" rabbet/dado cutter. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta Rockwell Shaper Cutter reducing Tee bushings 1/2" to 3/4" # 42-127
Delta Rockwell Shaper cutter tee bushings. Set of two(2) They reduce from 3/4" down to 1/2" Catalog# 42-127. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta Rockwell Shaper cutter tapered starting pin
Delta/ Rockwell shaper cutter starting pin. For freehand shaping without a fence. A must on the curved work. Will fit light duty and heavy duty shapers. May be black or silver in color. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta Rockwell Shaper Cutter Spindle Wrench # SBS-47
Delta Rockwell Shaper cutter spindle wrench. Catalog# SBS-47. Original wrench! Works on both the lathe or the shaper. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1432d5637bd-0xf7-
|
|
 |