|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
$17.50 Shipping Condition: Used Location: Raymond, United States This lot of 15 sets of base molding knives includes high-quality blades from Weinig, Lietz, Schmidt, and WKW. These knives are designed for use with a ... moreshaper moulder and are perfect for woodworking professionals looking to create precise and intricate designs.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
Free Shipping Condition: Used Location: Beach Lake, United States Shaper / Molder Custom Corrugated Back Knives For 1+" x 7 1/2" Casing or Base Molding. Knives are 7 3/4" long. 5/16" thick steel.
Buy It Now
$5.45 Shipping Condition: Used Location: Seattle, United States Corrugated-back HSS Base Cap moulding moulder or shaper knives 1/4" x 1 1/2" x 3 3/8".
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
Free Shipping Condition: Used Location: Beach Lake, United States Shaper / Molder Custom Corrugated Back / CB Knives For 3/4" x 2 3/4 " Casing or Short Base Molding. Knives are 3 1/8" long. 5/16" thick steel.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
Free Shipping Condition: Used Location: Beach Lake, United States Shaper / Molder Custom Corrugated Back / CB Knives For 5/8" x 2 1/16 " Casing or Small Base Molding. Knives are 2 9/16" long. 5/16" thick steel.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board multi-width. Most of the knives have only been ... moresharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Split Molding Knife, runs two pieces from ... moreone board. Most of the knives have only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, ... moreBackouts, Siding, Wall Cladding and more. All in good shape and ready to be put to work.
Buy It Now
$24.75 Shipping Condition: Used Location: Cedar Rapids, United States Lot of 29 sets of molding knives. 5/16" thick, corrugated backs. High quality, high speed tool steel. Most recently sharpened, some plastic dipped, some ... morewith sharpening templates. Nice assortment with some crowns and bases. Two-knife sets. From now-closed major furniture manufacturer. Pick up NE Cedar Rapids or will ship.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, ... moreBackouts, Siding, Wall Cladding and more. All in good shape and ready to be put to work.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Lot of (6) Corrugated Back Moulder Steel Profile Knives. 1/4" thick HSS M2.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
|
|
Lot 672 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice base moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13e81c15bda-0xf3-
|
|
Lot 661 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative base or casing profile moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is ... moreof future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
Lot 705 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for casing moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
Lot 768 Base Or Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative traditional base or casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ebedb5d58-0x106-
|
|
Lot 779 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom base moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ec05da4f1-0x104-
|
|
Lot 803 Crown Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom crown moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
Lot 1327 Base Casing Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for heavy custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-141243f97a1-0x101-
|
|
Lot 1288 Base Or Casing Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for nice base or custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
Lot 1386 Base Casing Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for base or lap siding moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If ... moreyou buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-141790418a0-0xfe-
|
|
Lot 1675 Crown Base Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for crown base moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice ... moreshowing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile
|
|
Lot 1740 Base Cap Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for panel cap moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice ... moreshowing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile
|
|
Lot 2022 Base Casing Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice ... moreshowing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile
|
|
Lot 2128 Base Cap Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for chair rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy ... moreseveral lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile
|
|
Lot 2206 Base Moulding /Weinig / WKW Corrugated Knives Shaper Moulder
Moulder knives for custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you ... morebuy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
Lot 024 - Casement Base Moulding Knives - Corrugated Shaper Moulder Steel
Casement or Base Molding- Standard corrugated back knives for shapers and molders. 4 3/16" Tall 1 13/16" overall length(measurements are approximate. Overall cutter size) 5/16" thick unless noted otherwise. I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 029 - Casement Base Moulding Knives - Corrugated Shaper Moulder Steel
Large Casement or Base Molding Knife Set Standard corrugated back knives for shapers and molders. 4 1/2" Tall 1 15/16" overall length(measurements are approximate. Overall cutter size) 5/16" thick unless noted otherwise. I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list! 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-147e1b474b1-0x118-
|
|
Lot 041 - Large Base / Casement Moulding Knives- Corrugated Shaper Moulder Steel
Large Base- Large Casement Molding Knife Set Standard corrugated back knives for shapers and molders. 6" Tall 1 1/2" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 038 - Casement / Base Moulding Knives - Corrugated Shaper Moulder Steel
Large Crown Molding Knife Set Standard corrugated back knives for shapers and molders. 3 1/2" Tall 1 11/16" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1497adcc21c-0x115-
|
|
Lot 035 - Casement / Base Moulding Knives - Corrugated Shaper Moulder Steel
Casement Molding/ Base Molding Knife Set Standard corrugated back knives for shapers and molders. 3 3/4" Tall 1 5/8" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 055 - Large Casement / Base Moulding Knives- Corrugated Shaper Moulder Steel
Base/ Large Casement Molding Knife Set Standard corrugated back knives for shapers and molders. 4" Tall 1 3/4" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 070 - Large Base Moulding Knives-Corrugated Shaper Moulder Steel
Large Base Molding Knife Set Standard corrugated back knives for shapers and molders. 6 1/2" Tall 1 15/16" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 077- Large Base Moulding Knives- Corrugated Shaper Moulder Steel
Custom Molding/ Large Base Molding Knife Set Standard corrugated back knives for shapers and molders. 6 5/16" Tall 1 11/16" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14ad25db462-0x116-
|
|
Lot 103 - Small Base Cap / Bed Moulding Knives - Corrugated Shaper Moulder Steel
Small Base Cap Molding- Bed Molding Knife Set Standard corrugated back knives for shapers and molders. 1 3/8" Tall 1 5/8" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 098 - Small Base / Casement Moulding Knives- Corrugated Shaper Moulder Steel
Small Base/ Casement Molding Knife Set Standard corrugated back knives for shapers and molders. 2 5/8" Tall 1 11/16" overall length(measurements are approximate. Overall cutter size) 5/16" thick steel I sharpened and oiled most sets before I put them way in drawers 15 years ago. I have since sold most all my machines and have a pile of knives left. Wife is cleaning my shop out. What you see in the picture is what you're getting so please ask questions if you have them before bidding. I am willing to combine shipping on multiple purchases! Let me know and I will send you a revised invoice before you pay. Check out my other items! Be sure to add me to your favorites list!
|
|
Lot 3693 Base Cap Moulding Weinig / WKW Corrugated Knives Shaper Moulder
Standard corrugated back knives for shapers and moulders. 5/16" thick unless noted otherwise. Most sets are sharp enough to run as is. I will try to note any damage in the cutting edge, but some may slip by me. Template included if shown in a picture. The grid background is 1" bold squares and 1/4" lighter squares. Use them as they are or re-purpose them by grinding new profiles of similar size and shape. Save lots of money by buying used at roughly 10% the cost of new! I will combine shipping so if you buy several auction listings, wait until the next day to pay upon receiving an invoice from me. International customers: Since the cost of shipping is more significant, I can hold an open box for several weeks allowing you to add new items into the same box. This can save you money on shipping. 20 lbs is the limit for USPS flat ... morerate. I just ask that you pay as you go, so at any time I can seal it up and ship to you. The first invoice will have the shipping cost and the following invoices will be free shipping. Send me a message if you have any questions. Thanks to everyone who has bought from me. From the people who buy 1 or 2 sets every now and again to the guys who buy 15-20 per week every week. I'm glad to serve you in any way possible! Steve
|
|
|