|
Tempress Inc. Fish-On Rod Holders
Tempress Inc. Fish-On Rod Holders Two Tempress Fish-On rod holders. One with mounting bracket one without. Both are in very good condition. Please view all the photos and e-mail any questions you may have. I try and let my photos show actual condition of the item. Be cautious of light glare or flash glare in photos. Please read the small print below photos. Small print may save big headaches. International Buyers– Please Note: I will gladly ship internationally. BUT: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company, Postal Service, or when you pick ... morethe item up– do not confuse them for additional shipping charges. Once I drop your item off at my local Post Office it can easily take upwards of 20 to 25 business days for your package to be transported to your country and clear your countries importation and customs agencies. If I made an error in the description. And it is not what you thought it was, let me know, and I will refund your items purchase price. That is once I get the item back in the same condition sent. Insurance is required on returned items. Remember terms like“good, very good, nice, etc. are vague terms, but are common terms, that are used frequently by this market place. Terms like“new, mint” are not vague terms. I take numerous photos for visual inspection of condition, but you are expected to form your own opinion of condition or grade. You also can request additional photos and or ask additional questions concerning condition or grade. You must take some responsibility for what you purchase, as I do for what I sell, and therefore do not ask for a refund because of buyer’s remorse! Items purchased and sent to an address other than the purchasers, are non-returnable. Powered by The free listing tool. Li
|
|
|
Vtg Beep Beep Fish Pole Holder PRAIRIE PRODUCTS COMPANY
Vtg Beep Beep Fish Pole Holder PRAIRIE PRODUCTS COMPANY Up for your consideration is a Vintage Beep Beep Fish Pole Holder PRAIRIE PRODUCTS COMPANY Rapid City and Sturgis. South Dakota. Comes with the original box. The inside looks like it was never used– not sure. It is used– not new. It has the normal marks of being used. I will tape the label(least expensive) on the box unless otherwise told to do so– may cost more for postage. Selling AS IS. Please see the pictures for the best description. And thanks for looking. I do my best to take a lot of pictures so you can gauge the condition of the item. I try and describe all notable flaws. But you are buying used- not new. This shirt is being sold as is– no returns unless there was an obvious error in description. I am capable of missing something. If needed. Please ask questions before purchasing. ... morePlease check our store feedback and buy with confidence. Many of the items we sell are from local estates. We generally have a wide range of collectibles for sale. Please feel free to ask for further information if there is something we failed to mention. All sales shipping outside of the U.S will pay the exact freight amount. We only mail priority mail international and we do not pay for international return shipping. Payment arrangements must be made within 3 days of purchase. Returns are accepted on a case by case basis depending on the specific situation. We do combine shipping on multiple items. Express shipping and tracking are always available upon request. We can not be held responsible for damages during shipping. So we put much effort into careful packing. Payment methods accepted are Paypal or Check. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
HOME DECOR "WISHING I WAS FISHING" BIG FISH FISHING POLE HOLDER
HOME DECOR"WISHING I WAS FISHING" BIG FISH FISHING POLE HOLDER `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b5d9e430f-0x116-
|
|
|
Folbe Advantage JR Fishing Rod Holder w/ Side and Pedestal Mounts
This auction is for(2) two Folbe Advantage JR Rod Holders. They are in like new condition. They were mounted on my boat but never used. Included are both the surface/pedestal and side mounts for each holder. Shipping to the lower 48 states only. Check my perfect eBay rating and bid with confidence. You will be pleased with this purchase. The JR is a smaller. Updated version of it's big brother– the clam shell design gives the angler all the benefits of our original Advantage Rod Holder, but in a compact size. The JR holds your rod securely, yet easily releases it when needed– pull your rod out and set the hook in one quick motion. Perfect for everything from kayaks to larger vessels, it fits all trout, pan-fish, walleye and most salmon rods. High quality materials ensure years of reliable use. Features Cut-outs for left or right hand ... morespinning reels. Shorter top profile for line clearance of low profile reels. Shorter top profile holds rods tighter. Less movement. Shorter top profile for holding two-handed fly reels. Fits spinning. Casting, and trolling rods. Holds rod with up to 1.2” handles. 2/3 smaller than the original Advantage rod holder. Has cut-outs to accept rods with finger(trigger) grips. Virtually eliminates the struggle to get your rod out. Mounting bases are auto-locking and holds gear securely. Simple and easy to use. 100% Made in the USA.
|
|
|
Vintage lot of fishing items downeast rod holders oar holders fishing line lead
Vintage lot of fishing items. What you see is what you get. rod holders oar holders line lead line lures etc.
|
|
|
4 - Down East Sportscraft Fishing Rod Holders, All Metal Construction
You get the rod holders in the photo Two clamp to side of boat Two clamp to tubing on the hull One is missing the leveler on the tufting screw These have very light corrosion in places Sold as is no returns
|
|
|
Vintage 24pcs.fishing rod holder
Used fishing rod rack Holds 24 rods. I no longer need.This will be taken apart to ship.If shipping is less than the 17.00 I will refund the difference
|
|
|
Black Sheep Brand 4161Belly Fishing Rod Butt Holder Tooled Leather Support Belt
Black Sheep Brand Model# 4161 Leather game fish fighting belt/rod holder. Beautifully hand-tooled leather and in great shape. Considering its age. It's in fine working condition!
|
|
|
Vintage Down East Sportscraft Fishing Rod Holder Lewiston and Yarmouth Maine
Great Original Down East Sports Craft Fishing Rod Holders. A LEWISTON MAINE and Yarmouth Maine. Good condition. Please look over pictures. Sold as is!
|
|
|
PERKO POLE/ROD HOLDER - RAIL MOUNT 3/4" - 1" RAIL
PERKO POLE/ROD HOLDER- RAIL MOUNT 3/4" 1" RAIL STAINLESS STEEL GOOD CONDITION READY TO USE PLEASE WAIT FOR AN INVOICE. I CHECK FOR CHEAPEST SHIPPING RATE- PLEASE NOTE THAT SHIPPING RATES ARE FOR CONTINENTAL UNITED STATES, ANY OTHER AREAS PLEASE CONTACT FOR AN ESTIMATED SHIPPING PRICE THANKS FOR LOOKING! I do my best to take accurate pictures and to give an accurate description.
|
|
|
18-Rod Rack Fishing Pole Holder, Fishing Rod Storage
Selling 18-Rod Rack Fishing Pole Holder. Fishing Rod Storage Very Well Maintained. Very Sturdy Rack WE ARE ELIMINATING SURPLUS TOOLS. SOME NEW. SOME USED. WE WILL BE LISTING LOTS MORE, PLEASE KEEP CHECKING. Please note this listing is being sold locally as well as on eBay. So we do reserve the right to end the auction early if this item is sold locally! The pricing is really set to sell. So don't miss this opportunity! These items belong to the owner and have been taken care of and tested prior to posting. Please ask any questions and send us your comments! Thank you! Please check out our store. As we have several other similar items such as construction tools on sale! Feel free to let me know if you have any questions. Thanks for looking! Shipping/Handling Terms: NO INTERNATIONAL SHIPPING! Buyer pays for all shipping/handling costs- ... moreFor items without specified shipping cost. Please use“ Shipping Calculator” and check shipping cost according to your destination and item’s weight. Save shipping costs! For heavy weight items. I can arrange pick up for locals(Santa Barbara only) Please note that my shipping costs includes VERY secure packing w/ all necessary bubble wrapping and protective cushioning for all my items! A note to buyers requiring shipment to military addresses: I do not ship to military addresses where the final destination is out of the country. I understand that overseas military addresses go out from US addresses that appear to fit the description of domestic shipping. But they require customs forms and extra handling that my shipping costs do not cover. I do not ship to military addresses where the final destination is out of the country! I DO NOT SHIP TO PO BOXES! BUYERS WITH“ZERO” FEEDBACK SCORE PLEASE CONTACT ME BEFORE BIDDING. OR BID WILL BE CANCELED. Payment Terms: All payments are due within 3 days of winning bid. NO EXCEPTIONS- I ACCEPT PAYPAL ONLY! Items are usually on their way within 48 hrs or less after payment is completed. Payments receive
|
|
|
Smith Top Mount, Stainless Steel, Clamp-On Fishing Rod Holders
Vertical or Horizontal Mounting* 316L Stainless Steel* UV Resistant White Vinyl Liner To Protect Rods* 10" Long With 1-5/8" Inside Diameter* Fits OD Pipe Measuring 7/8" 1" or 1-1/16"
|
|
|
Lot of 8 Shimano FX 4000FA Spinning Reels with new line
I have a bunch of Shimano FX 4000FA reels for sale. They have all been professionally serviced and are in great shape. Graphite bodied reels with aluminum spools. They are all lightly used but have perfect gears. They are perfectly smooth. They come spooled with never been used 10lb monofilament line in clear. All of the handles are brand new. These are perfect reels for light tackle fishing. Fresh or saltwater. Great for kids. Thanks for looking and have a good day.
|
|
|
Scotty Strap on pontoon fly rod holder with pontoon base. Used once.
This is a Scotty strap on fly rod holder setup to strap on a pontoon. It has the standard Scotty base with fly rod holder mounted on a pontoon strap on base.
|
|
|
Vintage Car Fishing Rod Holder by Don Berry, Inc No. 1509
Really cool vintage fishing rod holder. Needs new foam and roll pins. Not sure why roll pins are missing but easy to replace. These are made of aluminum with stainless screws. Comes with original box. Thanks for looking.
|
|
|
perko rod holder rail mount. lot of 2
for sale are 2 perko rail mount rod holders in used condition
|
|
|
Rodmounts fishing rod transport system (fishing rod rack)
These Rodmounts were previously used inside of a car. They are a bit faded and have some scuff marks. But they are perfectly functional. Comes with the original reusable nylon cable ties. These holders can be mounted to a variety of surfaces(e.g. inside or on top of a vehicle) and make fishing rod storage very convenient.
|
|
|
MATCHING DOWN-EAST SPORTSCRAFT FISH POLE HOLDER YARMOUTH MAINE Adjustable
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! MATCHING DOWN-EAST SPORTSCRAFT FISH POLE HOLDER YARMOUTH MAINE Adjustable, Click to View Image Album Click to View Image Album Click to View Image Album PLEASE SCROLL DOWN AND VIEW 2 PICTURES BELOW UP FOR AUCTION: DOWN EAST BOAT ROD HOLDER D-10"THE FISHERMANS THIRD HAND" Down-East Rod Holders offer quality all-metal. Made in the U.S.A. construction. These rod holders can be used with spinning, casting and fly rods and offer several horizontal and vertical mounting positions. Down-East Rod Holders are rated for light to moderate fishing of fish up to 25 pounds and for use with line up to 30 pound test. When a fish strikes, simply lift the rod straight up out of the rod holder. The are no releases to unclip or undo. The Down-East D-10"Down Easter" clamp mount ... morerod holder is equipped with a single screw clamp mount. This allows you to mount and remount the rod holder in a wide variety of places. A reinforcement bar attaches to the clamp which prevents the holder from tipping and distributes the stress of the"strike. Both these Rod Holders are used with some signs of use. Enjoy Denise CHECK OUT MY OTHER AUCTIONS ON EBAY Bid early to avoid close time disappointment. Please view pictures as they describe the items quite well. Use calculator below for shipping options and determining Postage to your place. Thank you for viewing our auctions and the very best of luck to you on your bidding BearPaw7 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~. My 100% Positive Feedback means that I am a seller that you can trust. Quality items. Honest claims.and Safe packing are exactly what you can expect. Guaranteed! We will combine shipping on multiple items Insurance Required over $50. PAYMENT: Pay with PayPal or PAY AT PICKUP UNLESS OTHER ARRANGEMENTS HAVE BEEN MADE! INTERNATIONAL BUYERS NOTE: accepted payments are Pay Pal. US Funds Questions email Through ebay or call 315-691-9733 Thanks. Payment PayPal. Pay at pickup! UNLESS ARRAN
|
|
|
Two Fish On rod holders one Spinning Rod Holder and one bait cast w/ 1 base
Two Fish On rod holders one Spinning Rod Holder and one bait cast w/ 1 base
|
|
|
BOAT FISHING ROD HOLDERS (2) CHROME 13'' X 18''
Up for bid are(2) 13' X 18' CHROME ROD HOLDERS. I am not familiar with Nautical holders(see picture) but they are in very good condition. Both have ropes with locking clips and 2 Slits on the end of the long side. The starting bid is $29.00 plus $15.00 S/H' CONTINENTAL USA ONLY' PAYPAL- Ask questions before bidding. Thanks
|
|
|
2 Original Ram Tube Rod Holders Fishing Trolling Kayak Downrigger Tournament GU
This listing is for two. Ram-tube Tube Rod Holders, in good used condition. Features: The RAM-TUBE Fishing Rod Holder. Ideally suited for anything from kayaks to tournament boats. This compact and simple design is ready for your next day on the water. Powder coated marine grade aluminum• For use with 1.5 in. rubber ball mount• Black powder coated• Can be rotated 360 degrees
|
|
|
ROD HOLDERS (5) FISH BASKET (1)
Various rod holders. Fish basket is 12W x 22L
|
|
|
Vintage Fishing Belt Leather Canvas Rod Pole Holder 42" Belt AMF-150
This vintage canvas and leather fishing belt is in really great shape The belt is 42" long it will fit a waist of 40" or less. Please see photos in detail and feel free to contact me with any questions You may have. Thank You 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b716f450c-0x10e-
|
|
|
Antique Vintage FISHRITE Fish Fighting Belt Leather Fishing Rod Pole Holder
This is an Antique Vintage Big Game Fish Fighting Belt(waist gimbal? made of Heavy Leather& metal holder Fishing Rod Pole Holder. Inside the metal holder it says"FISHRITE" The leather is quite worn and shows lots of patina. The belt buckle is rusty.
|
|
|
Chrome Fighting Chair Gimbal
Chrome Fighting Chair Gimbal.check out the pictures and my other ads for some Great deals!
|
|
|
Marine 15 Degree Rod Holder Flush Mount Stainless Steel 1 PAIR ONLY Rubber Core
L” OO” K… TM the Best Deal on 1 pair(2 pcs. of flush-mount 15 degree Stainless Steel rod holders with white soft rubber core centers. Came off a kayak salvage. Clean! It's a No Brainer' Deal with free shipping anywhere in the USA! F O ll O w M e TM‘ OO” TM HERE ON AND BE ONE OF THE FIRST. TO VIEW NEW ITEMS, AND BE ONE, OF THE FIRST TO"BUY IT NOW" IF YOU ARE- F O ll O wing M e TM- ONE MAN& TWO HANDS à à u J ZNN TM… TM here on… OO” TM F O ll O w M e TM- ONE MAN& TWO HANDS à à u J ZNN TM ADD ME TO YOUR 4444 favorites list AND GET YOUR RSS FEEDS DIRECT TO YOUR MOBILE DEVICES. TO SEE MORE DEALS LIKE THIS ONE FIRST SO YOU CAN BE THE FIRST TO“ BUY IT NOW” SHIPPING W O R L D W I D E INTERNATIONAL GLOBAL SHIPPING RATES STILL DO APPLY W I T H GLOBAL SHIPPING PROGRAM Make sure to- F O LL O W ME- → TM HERE ... moreon… TM… OO” TM All artwork& framework are fully protected by law. DO NOT COPY THANKS FOR L‘ OO” TM KIN"
|
|
|
down east sports craft rod holder LEWISTON MAINE QUICK RELEASE
down east sports craft rod holder LEWISTON MAINE QUICK RELEASE IN USED BUT VERY NICE CONDITION ALL ITEMS ARE PACKED WITH EXTREME CARE FOR SHIPPING BID WITH CONFIDENCE ALL ITEMS ARE SHIPPED AS SOON AS PAYMENT IS MADE SAME DAY WHEN POSSIBLE POST OFFICE DELAYS ARE SOMETIME POSSIBLE DUE TO WEATHER OR HOLIDAYS PLEASE BE PATIENT(CHECK TRACKING# OFTEN RETURNS ARE ACCEPTED ON ITEMS THAT DO NOT MATCH ITEM DESCRIPTION MY ITEMS ARE FROM MANY DIFFERENT SOURCES ESTATE SALES.AUCTIONS,FLEA MARKETS, THRIFT STORES,ETC MOST ITEMS I DO NOT KNOW IF THEY WERE FROM PET FREE OR SMOKE FREE HOMES I WILL TRY TO DETECT ANY DAMAGE OR DEFECTS OR ODORS WHEN NOTED I DO WANT TO MAKE ALL MY CUSTOMERS HAPPY AND SATISFIED ON ALL PURCHASES IF FOR SOME REASON YOU ARE NOT. PLEASE NOTIFY ME SO WE CAN FIGURE OUT A SOLUTION MY FEEDBACK IS VERY IMPORTANT TO ME. HAPPY BIDDING-GOOD ... moreLUCK I DO SHIP WORLD WIDE PLEASE CONTACT ME FOR A SHIPPING QUOTE BEFORE PLACING A BID ALL US SHIPPING WILL INCLUDE A TRACKING NUMBER. PAYMENT ACCEPTED PAYPAL PLEASE PAY WITHIN THREE DAYS END OF AUCTION IF MORE TIME IS NEEDED JUST LET ME KNOW THANKS Be sure to add me to your!
|
|
|
2 Izorline al 139cb Rod Butt Rests Belts With Climbal Bars Deep Sea Fishing
These are two nice Izorline rodd butt rest belts. They have the bars on them. I think they are called Glimbal bars) They adjust up to 51" Made of artificial leather with nylon straps and snap closure. Used, but in nice condition. Please see shipping calculator for actual postage cost for US sales. I guarantee you that if you are overcharged by $2 or more for shipping, I will refund that amount to you. Always happy to combine shipping. Thanks for looking, and good luck!
|
|
|
Fishing Rod Case, Hard Travel Tubes All Kinds & Sizes Local Pickup Only
Up for bid 17 fishing rod cases All kinds and sizes Local pickup only Please look close As is in photos Local pickup only If you live in Arizona I can deliver them For a extra 50.00 bucks with in the the state of Arizona Thanks Thanks
|
|
|
Vintage Handmade Heavy Metal Boat Fishing Pole Holder
Handmade in the early 60's- needs a good cleaning and possible painting( as there is some rust. As you can see in the pictures. Approximately 6" long and 1" wide. Thank you for your interest!
|
|
|
Lee's Tackle Clamp-On Vertical Mount Rod Holder (Fits 1.660" O.D. Pipe)
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe. Insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower. Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. ... moreFour Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
|
|
PAIR OF ESSENTIAL ADJUSTABLE ROD HOLDERS WITH BASE
PAIR OF ESSENTIAL ADJUSTABLE ROD HOLDERS WITH BASE On offer is a PAIR OF ESSENTIAL ADJUSTABLE ROD HOLDERS WITH BASE. Both in GC one has a small bit of surface rust on the nut. They can be mounted flat or sideways, the holders are quick release and can be adjusted left to right and the angle. Terms of Sale Postage& Packaging. Payment& International Buyers Ø When items are listed I try to describe them as best as possible including a good photo as possible showing the true condition of the item. Ø I am not an expert in all areas and occasionally make mistakes in my description. If you see an error, please feel free to send a message so corrections can be made. Ø Postage fee includes packing and handling and all items are packed with care· Ø Payment is due within 5 days of the auction ending by PayPal or Bank ... moreTransfers. Pick up is ok. A Non payments case will be opened after 6 days unless prior arrangements have been made. Ø Lost packages or breakages due to the negligence of Australia Post will not be refunded. However all attempts will be made to advise buyer of the time, date and place of postage, that they may attempt to track the item. Ø Where possible I will combine postage for multi items to save on postage. Ø International buyers PayPal is the only payment accepted and please obtain a quote on the cost of postage before bidding. Ø If you have problem with the item please contact me before leaving feedback so we can try and resolve any issues
|
|
|
PAIR OF BACSOON STAINLESS STEEL ROD HOLDERS
PAIR OF BACSOON STAINLESS STEEL ROD HOLDERS On offer is a PAIR OF BACSOON STAINLESS STEEL ROD HOLDERS. Both in GC with the odd mark, have a hard rubber insert, length 230mm, the brackets on the back are approx. 75mm. Terms of Sale Postage& Packaging. Payment& International Buyers Ø When items are listed I try to describe them as best as possible including a good photo as possible showing the true condition of the item. Ø I am not an expert in all areas and occasionally make mistakes in my description. If you see an error, please feel free to send a message so corrections can be made. Ø Postage fee includes packing and handling and all items are packed with care· Ø Payment is due within 5 days of the auction ending by PayPal or Bank Transfers. Pick up is ok. A Non payments case will be opened after 6 days unless ... moreprior arrangements have been made. Ø Lost packages or breakages due to the negligence of Australia Post will not be refunded. However all attempts will be made to advise buyer of the time, date and place of postage, that they may attempt to track the item. Ø Where possible I will combine postage for multi items to save on postage. Ø International buyers PayPal is the only payment accepted and please obtain a quote on the cost of postage before bidding. Ø If you have problem with the item please contact me before leaving feedback so we can try and resolve any issues g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b7df8ce31-0x102-
|
|
|
4 Lined Perko Clamp On Rod Holders (7/8 - 1 inch Rail)
Chrome Perko adjustable clamp on rail rod holders
|
|
|
Two Perko Clamp-on Fishing Rod Holders (Holder is Stainless Steel)
This auction is for two used Perko Clamp-On Fishing Rod Holders. The Tube itself is Stainless Steel with a hard back polymer liner with drain holes and 9” long. The bracket is chrome plated zinc alloy( I.D. Tube is 1-5/8” and O.D. 2” The clamp-on bracket simplifies relocation and will mount vertical or horizontal. This bracket will fit rails 1” to.75” With the adjustment of bolt size.
|
|
|
VINTAGE WOOD ROD RACK 5 FISHING RODS POLES CORNWALL WOOD PRODUCTS SO. PARIS, MA.
For sale a really great vintage Fishing Rod Rack. Made to hold 5 rods. Signed on the backside Cornwall Wood Products, So. Paris, Maine made before 1963. The wall hanger shows a fly fisherman motif. Measures 11 ¾” long, 4 ¾” tall and 2” deep. Well constructed no chips, no cracks, no breaks and no repairs. Wood surface does show dents and scratches from age and use. All paint very good condition. Sold as a used collectible. Questions are answered ASAP. Thanks for Looking.
|
|
|
Two Tite Lok Rod Holders with Base
Two Tite Lok Rod Holders with Aluminum Base Please review my other listings for some Great deals on QUALITY items!
|
|
|
1/2" Stainless Steel Rod 19"
Non-ferrous. Four pieces 19" each. Other quantities available. Payment is expected within 8 days. Items may be returned in 14 days. Return postage is generally not refunded. Buyer pays actual shipping cost, no charge for handling or materials, most items are shipped within 24 hours of payment. Merchandise is carefully packed. Will combine shipping when possible. Ask any questions, thank you for your bid
|
|
|
Angler's Fish-N-Mate 4 Rod Holder Bumper Mount Anodized Aluminum Rod Rack
Angler's Fish-N-Mate 4 Rod Holder Bumper Mount Anodized Aluminum Rod Rack Item Description INTERNATIONAL SHIPPING AVAILABLE You are bidding on a Angler's Fish-N-Mate 4 Rod Holder Bumper Mount Aluminum Rod Rack. Mounting plate measures 12" x 3" Very good condition. No bolts or nuts included. Shipping and Payment Please feel free to e-mail me if you have any questions. World Wide Shipping Available Alaska. Hawaii along with US Territories and APO's shipped via USPS Priority Mail may require additional shipping charges. Please check out Spuds' other auctions. New items added every day. inkfrog terapeak. InkFrog Analytics.
|
|
|
Scotty Powerlock 2 Black Rod Holders with 1 242 Rail Mount Adapter
Black Power Lock Rod Holder with No. 242 Rail mount Adaptor. Scotty's most popular value-priced All post mount Scotty rod holders are fully adjustable up and down and rotate 360 degrees. No returns as items are priced so low. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14b853f3d6f-0x108-
|
|
|
1930s totem Barco manufacturing company solid brass fishing pole holder
you are looking at a solid brass totem fishing pole clamp this is made by Barco manufacturing company. Pat no 1992 165 it appears to be an excellent condition it is missing the pole holder please view all photos for best description please ask questions prior to bidding we accept PayPal and ship to a confirmed United States address only good luck
|
|
|
Vintage, Hand Crafted, Wooden Fishing Rod - Pole Holder
Here is a hand crafted wooden fish shaped fishing rod holder. The pine board measures about 18" long.
|
|
|
Vintage Handmade Heavy Brass And Copper Antique Fishing Pole Holder
Auction is for a very old brass and copper handmade fishing pole holder. Almost folk art. Very cool. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b87accce9-0x117-
|
|
|
Four Lee's and two non-branded horizontal rod holders - 1-5/16"
Six horizontal mount rod holders in very good shape. Four are Lee's and two do not have a brand on them. One of the non-branded has a couple of scratches(see pic) Also. Missing a couple of the bolts. Size is 1-5/16"
|
|
|
Fishing Rod Holder Stainless Steel Angler's Pal Permanent 360° Swivel Mount 800
Angler's Pal Fishing Rod Holder Model 800 For Your optimum fishing performance Angler's Pal gives you a 360 degree full hemisphere of possible positions precision made of rust-resistant Stainless steel/aluminum for Fresh and Saltwater Fishing 10" Deep Socket for Larger Fishing Rods 1 3/4" diameter and stands 13 1/2" tall Rod Holder can be easily removed from the Swivel Mount for storage Swivel Permanent Mounting Base Can be mounted to dock or boat(Screws not included) designed& manufactured by MarineTech USA It is in very good condition and has only been used in fresh water Please Mouse over photos to enlarge and take a good look Used what you see is what you get Sold as is no returns Don’t miss out on this One or It will quickly disappear with just the click of someone else mouse! Buy it Now 34.50 Before Someone ... moreelse Snap’s it up! Please see photos before bidding What you see is what you get sold as is with no returns get yourself a steal! Buy it NOW I ONLY SHIP IN THE U.S.A. I ONLY ship to your confirmed address. I will package your item with the same care as if it were my parcel. In case of insurance claim. Please retain all original packaging! A claim would be made at your local Post Office I am not an expert or dealer I describe the Item to the best of my ability please see the photo(s) before placing a bid. All used items are sold"as is" Without warranty and no returns As always with used equipment it is. AS IS without warranty, guarantee or returns. By bidding on this item, buyer accepts all responsibility for(and any potential risks associated with) use of item. THANK YOU Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fishing Rods, Reels, Misc. Tackle
Offered at Auction Here are 3 rods. 2 reels and misc. tackle for"Fishing Fun" Including: 1 Daiwa 4'6" 2 pc. Minimite" 18 Rod- 1 Southbend 5'6" 2 pc. K2000SC" medium action Rod-1?Zesco 5'6" Rod- 1 Southbend Spin Cast Reel"K2SC" spooled with 12# test line- 1 Tom Mann Spinning Reel"Graphite 630" spooled with 10# test line. Misc. tackle includes bobbers. Hooks, baits, weights, rod holders, etc. Payment via Pay Pal is expected within 2 days following the end of the auction. This item will ship to the contiguous 48 states ONLY PLEASE.
|
|
|
FISHING ROD RACK WITH WHEELS HOLDS 36 RODS AND REELS
NICE VARNISHED ROD RACK has wheels to move it anywhere in good condition buyer pays shipping and handling of $29.99.
|
|
|
2 monster rod holders
2 nice master rod holders feel free to ask questions
|
|
|
PVC Fishing Beach Rod Rest
PVC Fishing Rod Rest for beach use. Flanged opening with pin in middle. 31 1/2" 35 1/2" 2"W. Sand included. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b91453227-0x10d-
|
|
|
Vintage Fishing Rod Holder Trolling Clamp Chris Craft era RARE Rockville V.F.D.
I dont know anything about this rod holder. It was purchased at estate sale in Rockville. MD and looks to be invented by the town's local fireman. May be the only left in existence. Lovely wood holder would look at home in a Chris Craft. purple bin)
|
|
|
Berkley Rod Holders (3), black
3 like-new Berkley Rod Holders. Black in color. Each will hold four rods. Two holders are for holding the base(handle) of rods. They have foam lining. One holder is for holding the upper part of the rods. It does not have foam lining.
|
|
|
Berkley Outdoorsman Vertical Fishing Rod or Pool Cue Rack VR-1 Holds 6
Stores 6 rods neatly and securely in your boat. Home, or garage. Made of corrosion proof, super tough poly-propylene. Foam grip pads hold rods securely, won't damage finish and wont take a permanent set. Makes an excellent pool cue rack! Box has some damage. Rod rack has never been used. Thanks for looking! Check out our other great listings.
|
|
|
Lot Of 4 Rapid Release Charter Series Fishing Rod Holders
For sale is a set of four rapid release rod holders. They are used but in good condition. No mounting pieces included. Please see photographs for item specifics and condition. Continental United States shipping only. Thanks for looking.
|
|
|
2 Daiwa 7000-C Spinning Reels (large) used
For Auction: 2 Daiwa 7000-C spinning reels. Both are in excellent working condition. These reels are very clean.With no rust,corrosion,or boat rash. One of the reels is missing the Daiwa emblem on the right. Side as shown in the photos. Both are in near mint condition.Each reel is loaded with 20lb.test monophilament quality fishing line. THANKS FOR YOUR TIME( DOMESTIC SHIPPING ONLY USA)
|
|
|
Down East Sportscraft Fishing Rod Pole Holder Dual Clamp Adjustable Excellent
UP FOR AUCTION IS THIS VERY NICE DOWN EAST SPORTSCRAFT POLE HOLDER FROM LEWISTON MAINE EXCELLENT CONDITION. LOOKS TO HAVE NEVER BEEN USED, GALVENIZED FINISH, ADJUSTABLE CLAMPS SO VERY VERSITILE CLAMPS WILL BE REMOVED FROM HOLDER TO ENSURE SAFE SHIPPING IN A USPS PADDED FLAT RATE ENVELOPE CHECK MY FEEDBACK AND LOOK AT THE PICTURES YOU ARE BIDDING ON: THE DOWN EAST POLE HOLDER IN THE PHOTO'S I HAVE MORE CAN AUCTIONS AT THIS TIME. CHECK THEM OUT I WILL COMBINE SHIPPING SHIPPING WILL BE USPS PRIORITY MAIL E-MAIL ME IF YOU HAVE ANY QUESTIONS ABOUT THIS ITEM
|
|
|
vintage wooden rod rack fishing rod holder to hang on wall decoration etc.
Here is a vintage rod rack fishing rod holder made of wood painted with graphics of a fisherman in middle. It is done in white and green paint. Measures appx. 11.5" x 5" thanks for looking. Have a great day! 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b9bbcb237-0x116-
|
|
|
5 ROD HOLDERS,4 ROBERTS,1 RAM,MOUNTS,BOLTS,ETC,USED!
HAVE 5 ROD HOLDERS. 1 RAM& 4 ROBERTS BY ATWOOD,TOOK OFF OF BOAT THAT I RECENTLY BOUGHT,HAVE NO NEED FOR ROD HOLDER FOR THE WAY I FISH,HAVE MOUNTS AS WELL AS SCREWS THAT CAME WITH MOUNTS,ALL APPEARS TO BE FINE? HAVE NO CLUE WHAT THE STUFF ON THESE WORK,LOOK CLOSE AND MAKE SURE YOU KNOW WHAT YOU ARE BIDDING ON? CAUSE I DON'T. HAVE 3 DAY PAYMENT AT CONCLUSION OF MY AUCTION, GOOD LUCK AND THANKS FOR LOOKING.
|
|
|
CFS STAINLESS STEEL FISHING POLE 6 ROD HOLDER CAMPING CANVAS BAG
I THINK THIS IS FOR FISHING ON THE BANK OF A LAKE. THIS SALE IS FOR A MOSTLY NON MAGNETIC CFS STAINLESS STEEL SIX ROD FISHING POLE HOLDER W/ CARRYING HEAVY DUTY CANVAS BAG USED. ALL ADJUSTABLE AND YOU CAN ADD ATTACHMENTS TO THIS.LOOK AT THE PHOTO'S THAT IS WHAT YOU GET NO RUG NO SCALES
|
|
|
Assorted Fishing Accessories Rod Holders Cannon Rail Mount, Buoy Set, Renegade
Lot of Assorted Fishing Accessories/Rod Holders- 2- Cannon Rod Holders(one in box) 1- UnMarked Holder 2- Metal Rod Holders. In plastic 2- Cannon Rail Mount Adapters w/ screws(in package) 1- Renegade Pro Series Marker Buoy Set in unopened package See photos- Items included are shown. Items still in packages have water damage due to being on a boat. And packages are worn. First photo is of entire lot of accessories. Additional photos are for more detail and to show damage(not additional items) No returns accepted. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14ba343dc44-0xfe-
|
|
|
Down East Sportscraft Fishing Rod/Fishing Pole Holder/Mount/ Black Pole Rail
4- Down East Sportscraft Fishing Rod/Fishing Pole Holder/Mount Show a little wear but very good shape for age. 1- Black Rod Pole Holder Deck Mount. For Fishing Boat, good condition See Picture to know what you are getting.
|
|
|
Perko Rail Clamp Chrome Rod Holders (4)
Clamp on rail mounted rod holders. Plastic lined. Heavy duty. Show signs of use but are bright and look good.
|
|
|
VAN STALL VS150G
MUST SELL! VAN STAAL VS150G. IMMACULATE SHAPE. CAN SHIP FOR ADDITIONAL COST. TO BE DETERMINED BY ZIP CODE.
|
|
|
RODMOUNTS RODLOFT PRO UNIVERSAL INTERIOR FISHING ROD TRANSPORT SYSTEM ROD HOLDER
Featured in this auction is Rodmounts Rodloft Pro universal interior fishing rod transport system. Not sure if this unit has been used. It is in nice condition and I believe it is complete although there are no instuction papers, please email me if you have any questions. Buyer pays all shipping costs, if insurance costs apply they will be added to the invoice, if costs are overestimated I will always refund the overestimated costs via Paypal. Payment due within 24 hours of auctions end, if payment is not received within 48 hours of auctions end an Ebay Unpaid Item Case will automatically be opened no exceptions, please do not pay for this item until you recieve an invoice. Thanks for looking.
|
|
|
LOT OF 2 HH 1 HANDI HOLDER ROD HOLDERS
VERY COOL PAIR OF HH-1 FISHING ROD HOLDERS. BRIGHT ORANGE FOR HIGH VISIBILITY. GREAT FIND FOR THAT TACKLE BOX OR BANK FISHING. SEE PICS AND ASK QUESTIONS. PAYPAL ONLY PLEASE. WE COMBINE SHIPPING THANKS YOU FOR YOUR CONTINUED LOYALTY
|
|
|
Big Game Fish Fighting Belt Heavy Leather Fishing Rod Pole Holder Antique
Old and beautiful. Leather rod holder from way back. In wonderful, vintage shape: slight marring of leather surface and scuffed on back frm belt, but no rips or tears etc, belt in great shape. Great for hanging with old bamboo rod in man cave or around the waist with an eighty pound tarpon on the other end. Posted with
|
|
|
Tight Line Fishing Rod Holder magnetic car roof top mount bunge 4 rods carrier
Tight Line Fishing Rod Holder magnetic car top mount 4 rods- 1 pair Fishing rod holder for car or truck fishing rod holder roof top carrier 1 set = 2 mounts magnetic mount holds 4 rods rod rack lets you change fishing locations without breaking down your rods picture of rod mounts on car is only for demonstration. Not the actual mounts shown in the picture.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14baad43738-0x113-
|
|
|
Flush Mount Stainless Steel Fishing Boat Rod Holder 30 Degree aka 60 Degree
Flush. Gunwale Mount, Stainless Steel Fishing Rod Holders 1 Pair Proline Boats These are used stainless fishing rod holders that were removed from a Proline boat. The Proline name is displayed in the casting. They are 30 degree(AKA 60 degree) industry standard angle for Gunwale mounting. Solid bar at bottom for locking rods in position. Included with these items are the rubber mounting gaskets. Dimensions: 8" Length. 1 7/8" opening Please contact me with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14bad55fa78-0x113-
|
|
|
Vintage wood Romano's fishing rod rack holder - wall mount
Hand painted on wood"Romano's Rod Rack" with a fisherman standing in the river casting his rod. It is in excellent condition. It hangs on the wall and can hold up to 5 fishing rods. It is approximately 4.5" high and 12" wide. It would be a great rack to display your fishing rods. Thank you for looking. Please email me with any questions.
|
|
|
VINTAGE RUFF N READY 139 x HEAVY DUTY LEATHER FISHING ROD POLE HARNESS HOLDER NR
NO RESERVE… This auction is for a vintage Ruff n Ready 139 x Leather Fishing pole Harness or Holder. The metal needs some cleaning and even the leather needs some cleaning and polishing. But otherwise it is in good used condition. The shipping cost on this. To any of the 50 U.S. States is $5.25, via Insured Priority Mail. Please look at all of my photos closely, and please ask all your questions before you place a bid. Paypal is welcome from the U.S.A. It's always a very wise idea. To check back on an auction on it's last day, to see if there has been any new updated information added to that auction. BUYERS OUTSIDE OF THE U.S. ARE RESPONSIBLE FOR ANY CUSTOM DUTIES/ TAXES IN THEIR OWN COUNTRY. NOTE: Canada Shipping. So please email me for Canada Shipping Costs. Most all the Priority Mail Shipping, inside the U.S.A. goes out the day ... moreafter payment is received, except no shipping on Saturday or Sunday. Parcel Post, UPS Ground, and all International Shipping is always shipped within 5 days, after payment is received. I DO NOT ACCEPT BIDS. SELL, OR SHIP TO SOUTH AMERICA, CHINA, TAIWAN, KOREA, MEXICO, ISRAEL, ITALY, RUSSIA, SPAIN, or CALIFORNIA. I WILL NEVER EVER FALSIFY INFORMATION ON CUSTOM FORMS TO ANY COUNTRIES. ALL PACKAGES SHIPPED OUTSIDE OF THE 50 UNITED STATES. ARE SHIPPED ONLY VIA PRIORITY OR EXPRESS MAIL, NO MATTER HOW SMALL OR HOW LARGE A PACKAGE IS. THERE IS NEVER ANY EXCEPTIONS MADE ON MY INTERNATIONAL SHIPPING RULES. I AM NOT FAMILIAR WITH DIFFERENT COUNTRIES IMPORT OR CUSTOMS FEES. SOME COUNTRIES MAY CHARGE SUCH A FEE AND SOME COUNTRIES MAY NOT. PLEASE CHECK TO SEE IF ANY SUCH FEES ARE CHARGED IN YOUR OWN COUNTRY. YOU WIL HAVE TO PAY ANY SUCH FEE IF YOUR COUNTRY REQUIRES SUCH FEES. I DO NOT GET INVOLVED WITH ANY SUCH FEES. PICK UPS are considered on large or heavy items. Because my schedule makes it very inconvenient for me. Always ask concerning a pick up before you bid, otherwise the item will likely have to be ship
|
|
|
RAILBLAZA RIBport, Inflatable Boat Mount
Sells on for $22.99 plus shipping Includes 4 3/4" round pvc patch for mounting. approx 6" x 4" x 1 1/4" high Starport piece could be used alone for recessed mount(see photo of directions on back of Railblaza Rod Holder II) Gasket shown in directions is not part of or included with this mount. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14bafffdbb5-0x110-
|
|
|
Cosom Aluminum Universal Boat Mount Loader High Line Flag Vintage
Up for Sale is 1 Cosom Univeral Flag Mount. Loader, High Line Etc For Boats Cosom universal Mount. This unit has a 1.5" hole to put your pole through. Standard outboard screw locks. Please Check Pictures. International Buyers– Please Note: Shipping and Handling I am from Canada and there are multiple ways to ship items depending on the size and weight. If you are not happy with the price shown on the auction page contact me and i will look into seeing if there are any better options to save you money. This is for Canadian Customers as well. I offer combine shipping when multiple items are purchased. Please wait for my invoice to receive a combined shipping discount* Feedback and Detailed Seller Ratings I am working hard to earn positive feedback and 5 stars which help me to keep my prices low for everyone. If for any reason you are unhappy ... morewith your order and cannot leave positive feedback AND 5 Stars on the Detailed Seller Ratings. Please contact me prior to leaving your feedback or comment. I will do everything that I can to make sure you are happy with your purchase. Please email me if you have any question* Payment: PayPal Accepted* Thank you for looking!
|
|
|
Scotty 240 Striker Fishing Rod Pole Holder Fully Adjustable
Good Used Scotty Striker Rod Holder FREE SHIPPING
|
|
|
One Pair! of SCOTTY Fishing Rod Pole Holder Kayak Boat Black
GREAT CONDITION. MAY NEVER HAVE BEEN USED.
|
|
|
6 FISHING POLE ROD HOLDERS BOAT MOUNT HEAVY GAUGE METAL ADJUSTABLE UNIVERSAL
6 heavy duty sturdy. Fishing pole holders, boat mount. All in great shape, all can be adjusted/universal/tilted, by adjustable tightening screws. easily locked down, by hand tightening. all 6 weigh approx. 4pds. Thanks All items come from local estate/garage sales and are usually old/vintage used items. Items are already packed/ready to ship(email before bidding if you have any special shipping/package request or questions ASK BEFORE bidding) All packages come with tracking number. Not an expert in any type of item. So please look over photos/description before bidding. Thanks
|
|
|
Rod Holder, Double Rod Trees, Pair, Track mount, Salmon Trolling, boards
Pair of Double adjustable Rod Trees. Used one season a couple of times. Can be mounted to gun wale. Or slid in common tracks like, cannon, Trax tech, ect. Top can be used as net holder or vertical rod holder while running. Great price. Raw Aluminum can be coated. Or left alone.
|
|
|
3 Tite Lok Rod Holder 46571
The Multi-Lok holder has six angle settings for anodized. Rust- and corrosion-resistant aluminum rod holder. A special polishing system makes them as good looking as they are functional. Movable holders have a Pin-Lok function, which allows them to rotate 360° on mount, then lock securely. Rubber coating at contact points protects your rods. The Multi-Lok holder comes with a mounting plate. Tube is 2" x 10-3/4" tube. Never used but condition is aged.
|
|
|
Down East Gunwhale Mount Rod Holders
One pair(two rod holders) of Down East gunwhale mount rod holders. They have been used a few times but they're in excellent condition. Retail new for $39.99 each.
|
|
|
Tite Lok 5620 Aluminum rod / pole holder
Nice used Tite lok brand rod holder. Worked great on my great lakes boat. Some wear from use. First pic is for referents only. Comes from a smoke& pet free home. Check out my other listings! Payment will be expected within 2 days of auction's end. SHIPPING: I will combine actual shipping charges on items won within 1 week. Choose the best USPS shipping choice when checking out. Sometimes one will save you money or be quicker(how fast you receive an item depends on this) Combined shipping: each additional item is only $1.00 extra! Charged at checkout or send a request for updated invoice. Email with any questions prior to bidding. Thanks for looking!
|
|
|
Cabelas Fishing Rod Holders Model 291 Black Lot of 2 plus Bonus Koozie
For Sale: Lot of 2 Cabela's Fishing Rod Holders Model 291 plus bonus Cabela's Koozie Pre-owned/Light wear Let us know if you have any questions-we are glad to assist. If you select Fed Ex Smartpost shipping. Please note that I cannot ship to a PO/APO/FPO Box. If you need shipping to one of those, please select a USPS shipping service or email for quote or questions. Thank you! If there is a problem with your order. Please contact us right away! Thanks.
|
|
|
Stainless steel rod holer. Adjustable angle.
Nice working pole holder. Some signs of Age. Some plastic knobs are cracked but still work to tighten. Priced accordingly. Comes from a smoke& pet free home. Check out my other listings! Payment will be expected within 2 days of auction's end. SHIPPING: I will combine actual shipping charges on items won within 1 week. Choose the best USPS shipping choice when checking out. Sometimes one will save you money or be quicker(how fast you receive an item depends on this) Combined shipping: each additional item is only $1.00 extra! Charged at checkout or send a request for updated invoice. Email with any questions prior to bidding. Thanks for looking! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14bc21d8824-0x110-
|
|
|
2 VINTAGE HEAVY DUTY METAL ADJUTABLE FISHING ROD HOLDERS ~ POLE REST
THESE ARE OLDER POLE HOLDERS MADE OUT OF STRONG STEEL. NOT PAINTED OR FANCY. BUT READY TO USE. MAY ALSO BE USED FOR A FLAG HOLDER. MESSAGE ME ANY QUESTIONS.
|
|
|
Fishing Rod Organizer Pole Holder Rack Round Storage Display 16 Stand
This is a beautiful rod rack. It is easy to assemble and can hold up to 16 rods. Rubber clips securely hold the rods in place. Holds up to 16 rod& reel combos. Dimensions: 14 x 14 x 32 inches. Item is pre owned. Well cared for. Ask any question. Thanks for looking. Have A Great Day!
|
|
|
- SCOTTY BAITCASTER/SPINNING ROD HOLDER BLACK W/ 241 MOUNT X 2
Like new. Perfect condition. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14bc4b8d1fa-0x10d-
|
|
|
Pair of Fishing Rod Holders - Mount to Boat Sides/Gunwale - Perko - 30 Degree
Pair of Perko Fishing Rod Holders- Mounts to Gunwale of Boat Perko#1205 30 Degree angle off vertical Good Condition with some Pitting on top surface `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14bc4b92503-0x10c-
|
|
|
Winchester Fishing Pole Holder, Tool, plane, Very Rare,
I believe this is a very rare Winchester fishing pole holder. I have had it in my passion for over 50 years and before that. It was in my Grand Fathers tackle box.It is 8" long by 2 1/2" wide. The stamping looks very even and well read. I have never seen another one in my life time. If you have any information on it, please let me know. Thanks.
|
|
|
Down East Rod Holder Single Clamp Boat Fishing Freshwater Saltwater USA Made
This listing is a Down East Rod Holder Single Clamp Boat Fishing Freshwater Saltwater USA Made Condition: Outstanding- Used ONCE Lewiston. Maine Will ship within 24 hours from payment
|
|
|
Fishing Pole Rod Display - Holds 12 Rods!!!
Here is a fishing rod stand for 12 rods. It stands 2.5 feet tall and is 22 inches wide at the rear. Where it tapers to about 18 inches. There is a beautiful print of a fish on the top. Each rod has it's own hook and hole, to ensure they don't move out of place. The item will be disassembled for easy transportation and discounted shipping fees. All you need is a screwdriver to put it back together. Great for fishermen/fisherwomen or a store. Thanks for looking! SELLING AS IS CONDITION. Refunds& Returns I am not a professional. While I try to educate myself and have knowledge of all the items I list. I am by no means an expert. I do my very best to describe items accurately and honestly and to clearly point out any possible damage or flaws. As many of the things I sell are in used, antique or estate condition, they can be expected ... moreto show some signs of wear or imperfections and wear. All items are sold as-is. I don't polish or totally clean up the items, I leave that up to the buyer to choose whether or not they want to do so. Please read item description carefully. Please look at ALL the pictures, and If you have any questions, please email me before placing your bid. All sales are final unless I have grossly misrepresented the item, which I would never intentionally do. Your satisfaction is of the utmost importance to us. If a problem should arise, I will be very happy and more than willing to work with you in reaching an agreement. Please contact us if this situation presents itself. If we do authorize a return, we will refund the price of the item only, not the shipping charge. Return postage is also the responsibility of the buyer. Payment must be made within four days of auction close. All pictures are an important part of my description, so please look carefully at all the pictures to see the condition of the item and what I may have missed. I can send more pictures upon request. Thanks for looking, and have a wonderful day!
|
|
|
wood fishing rod holder for 10 rods - free standing or wall mount
The fishing rod holder is about 34 and 3/4ths inches tall. 31 and 1/2 inches wide, and 5 and 1/4th inches deep. The wood looks like oak. There are 2 hangers on the back for wall mounting, or it can be free standing. It is in excellent condition except for 3 scratches on the bottom rail. It will be disassembled for shipping unless you want to pay tremendous shipping charges.
|
|
|
FISHING ROD HOLDER STAINLESS STEEL GREAT WORKING CONDITIONS HOLD TO RODS
THIS'S A SIDE RINGER STAINLESS STEEL ROD HOLDER DOUBLE ROD HOLDER WITH MULTICS POSITIONS HAND ADJUSTED FOR ANY NEEDS. THIS'S A STRONG SOLIDS ROD HOLDER IN EXCELLENT WORKING CONDITIONS CAN LAST A LIVE TIME WITH NOT MUCH TO WORRY ABOUT. IT DO HAVE NORMAL WARE FROM FISHING BUT NOT AFFECT THE PERFORMANCE AND LOOK GOOD ANY QUESTIONS ABOUT THIS ITEMS JUST ASK ME. SEE PICTURES FOR MORE DETAIL. THANKS
|
|
|
Pair of PERKO Stainless Steel Clamp-on Fishing Rod Holders Used
Up for bid is a pair of PERKO clamp on Fishing Rod Holders in good condition. Each has some pitting mostly on the clamps. They measure approx. 9-1/8 inches tall with an inside diameter of around 1-3/4 inches. Please view pictures for a better description and feel free to ask questions. Thanks! See my other auctions at seller dmdax. THANKS! BUYER PAYS SHIPPING. FEEL FREE TO CALCULATE YOUR OWN SHIPPING WITH THE EBAY CALCULATOR. WINNING BIDDER MUST CONTACT ME WITH IN 48 HOURS WITH THEIR CITY. STATE, ZIP. IF USING PAYPAL, YOUR ITEM WILL BE SHIPPED TO THE ADDRESS LISTED ON YOUR PAYPAL ACCOUNT UNLESS IT IS AN UNCONFIRMED ADDRESS. SEVERAL INVOICES WILL BE SENT ONCE AUCTION HAS ENDED. PAYMENT IS DUE WITH IN 3 DAYS AFTER AUCTION ENDS. NO EXCUSES. EBAY WILL ISSUE A NONPAYING BIDDER ALERT AFTER 7TH DAY. INCOMPLETE TRANSACTIONS = NON-PAYING BIDDER MARK.
|
|
|
Pacific Catch Fishing Black Belt Standard Padded Rod Butt Rest With Gimbal
Pacific Catch Fishing Black Belt Standard Padded Rod Butt Rest With Gimbal.
|
|
|
Vintage Fishing Rod Holder - Screw Mount to Boat - Swivel - Black
Boat Mounted Fishing Rod Holder Mounts to boat with 2 screws(not included) Has 2 rubber protectors at rod end but 1 has been replaced and does not fit real well- it is pretty loose and falls off easily Lots of Peeling and Chipping Paint Some dents in metal framing- especially where it was locked down 2 U brackets swivel so you can bolt to a vertical or horizontal surface 1 nut loosens the rod holder so it can swivel to any angle 7" long.7" high Holds rod handles up to approx 1 1/8" diameter
|
|
|
Vintage Fishing Rod Holder - Screw Mount to Boat - Swivel - Heavy Metal - Black
Boat Mounted Fishing Rod Holder- Heavy Gauge Metal Mounts to boat with 2 screws(not included) Has 1 rubber protector at rod end Lots of Peeling and Chipping Paint- does not affect use 2 U brackets swivel so you can bolt to a vertical or horizontal surface 1 nut loosens the rod holder so it can swivel to any angle 7" long.8" high Holds rod handles up to approx 2" diameter
|
|
|
Teak Pedistal Mounted Rocket Launcher
Refurbished Rocket launcher in very good condition. 4 rod holders. Small tackle tray. Ready to be mounted to the deck of your boat. Sold and shipped to U.S. Addresses only.
|
|
|
Vintage Fishing Pole Holder Dot Line Tackle Chicago Dotline
Dot line tackle rod clamp. Nice vintage fishing tackle.
|
|
|
Down-East rail mount rod holder D-14 standard series
Lightly used but they weren't what I was looking for. For mounting on round hand railings from 7/8" to 1-1/4" in diameter. Please look carefully at pics. What you see is what you get. I am listing 4 separately. Ask any questions before bidding. Thanks for looking!
|
|
|
Four Driftmaster Rod Holders and Mounts for Crappie, Walleye and Catfish
Four Driftmaster Rod Holders and Mounts for Crappie. Walleye and Catfish Up for auction is a set of four(4) Driftmaster rod holders and four(4) Pro Clamp Base Rail Mounts for 7/8 Diameter rails. Stainless steel mounting hardware is included. These are in excellent condition with no corrosion whatsoever. Made in the USA. Thanks for looking. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14bd8ef25d9-0x10a-
|
|
|
Sampo Large Fishing Rod Butt Rest Leather Vintage Saltwater opening 2.5"
Sampo Large Fishing Rod Butt Rest Leather Vintage Saltwater opening 2.5" Sampo Large Fishing Rod Butt Rest Leather Vintage Saltwater opening 2.5 inches* I do combine shipping if possible. I go by weight. Box size and your zip code. Payment Please use Pay Pal Please pay within 4 days Item s shipped by UPS are insured if value is under $100.00 USPS $50.00 International bidders- Please Note: It Can take from 10 to 30 days ship time Average international delivery time is 10-14 days depending on your location. please note however. That while delivery may take as few as four days it may also take up to 6-8 weeks due to your customs’ holding policies. most specifically Italy, Spain) Terms of Sale If Item is defective and not working on arrival or item is not as described. Please report the item to us within 7 days of receiving the defective ... moreproduct. Please contact us to request a return. Please include your name, item, auction number, and reason for return in the email. All items returned must contain all original packaging materials. Please carefully repack the item and ensure that the item has no signs of usage or user-inflicted-damage, as it may void return/exchange. Items returned will be tested and if found defective. The buyer will be a refunded their money and shipping fees. If item is working or is as described you will be refunded but return shipping cost will not be. Insurance fees are non refundable. About Me I hope that the item I sell will be useful and a good value to you Contact Us Please use eBay Email and I will get back to with in 24hrs or sooner. I'm not at my PC 24/7 so please understand if you do not get back you right way. I have a day time job)
|
|
|
Vintage Fishing Pole Rod Rack Made in Taiwan
This is a wooden Taiwan fishing rod rack as pictured in original box with limitations as indicated. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14bd8ef2627-0x113-
|
|
|
Abu-Matick 60 Leather Reel Case - Made in Sweden
Abu-Matick 60 Leather Reel Case- Made in Sweden Measures 4" wide x 4" high x 3" deep at top&2 1/2" deep at bottom Leather in nice condition- Edges show some wear Made of Leather Email with any questions I will combine shipping- Please check out my other auction items.
|
|