|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Montville, United States Pick Up Only.
|
|
|
|
US AIR ANVIL HARD CASE REUSABLE SHIPPING STORAGE CONTAINER CARGO AVIATION PARTS
Up for bid is a(U.S. Air/ Anvil Case/ Rosemead. CA) Reus able Shipping Hard Case Container. It had many shipping label stickers on it from bein g used many times to ship"Aviation" Parts across the country. The locking closure mechanism still works great and it has two spring loaded handles on each side of it for carrying it. It weighs exactly 15 pounds and it measures 21"inches tall X 12" wide X 10" deep. I have cleaned it off but there is still a lot of sticker residue on the chromed aluminum which does not affect the working order of the case at all or the integrity of it. The inside of the case is lined with thick black foam which is starting to deteriorate. The case is made for just putting equipment in it and putting a shipping label on it and sending it off as/is. It could be used for storing stuff as well. ... moreOverall. It is the real deal"Anvil Case" and is extremely high quality and made here in the USA. It is very heavy duty, durable and tough for whatever you can throw at it. Don't pass up on this rare case and good luck bidding. I will be shipping the case as/is without a cardboard box around it unless you prefer to have me package it.
|
|
|
Used Anvil Shipping Case,Trunk,24x23x10 inches,Heavy duty,padded,D01 MM@35/37
This listing is for an Anvil Shipping Case. 24 height. 23 width x 10 inches deep, Case has obviously been used but is in good structureal condition, Inside has a solid divider that makes a 3 inch wide compartment, The inside is lined with foam. Foam shows signs of aging and has lost much of its integrity. I would recommend removing or replacing. If not satisfied for ANY reason. Send back within 60 days for a refund. Please see our other listings, since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Anvil Equipment Machine Shock Mount Ramped Road Case
I have many cases available. Please be sure to check my eBay store listings(to the left) for other types. Shapes, and sizes. Used Shipping Box/ Case Disclaimer This auction is for 1 used military or industrial surplus case in usable condition. Unless specifically noted in the description cases are used undamaged. All hardware latches, hinges, ect are in working order. They usually have writing and remnants of old shipping stickers and markings on them. The picture may be a representative from the lot or the actual case you receive. Unless stated otherwise in description all cases are shipped unboxed with just a tag or label sticker stuck on them. Description: Manufacturer: Hardigg Type of case: Single Lid My actual Approximate Measurements(in inches. Length x Width x Height) are: Case ID: 32 1/2 x 32 1/2 x 26 1/2 =(14 1/2 bottom + 12 top) ... moreCase OD: 35 1/2 x 35 1/2 x 30 Shipping dimensions: 36 x 36 x 30 Shipping Cube: 168… Oversize TRUCK SHIP(Shipping Cube is Girth plus Length) Weight in lbs: 65 My actual Approximate Measurements are Inside Dimensions are max of the case without anything in it. Outside Dimensions are max with all bumps and handles. Shipping dimensions is the max OD rounded up to the next inch as the shipper will do. Please note cases with a combined length and girth(Cube) over 130 inches are“oversize 3” and very expensive to ship. Be sure to check the cost before bidding or buying. Weight is as shown with whatever foam is in it and may not be an accurate reflection of the true weight of the case if it were empty. If needed please check the manufactures website for the true empty weight. Features: 8 Spring Return Carry Handles 14 Cam Latches 4 Wheel or Accessory plates on 1 end(wheels are not included) Color Gray Appearance of case or lot: Very Good. Dirty/dusty with stickers but will clean up nice. Damage: weather seal gasket has a split in it. 2 available at the time this listing was created. Manufacturer description: Hardigg’s single-lid cases ensure that even the most delicate equip
|
|
|
HAFER ROLLING FLIGHT/ROAD CASE 29" x 17 1/2" x 15 3/4" (keal or anvil style)
this case has been used very little. it is in good condition and has a lot of foam inside. it was used by a business to transport an expensive projector but in can be used for other equipment if you modify the foam. recessed latches and handles are working good and it has wheels on one end and a useful handle on the other end for you to pull and roll. Inside it's split in 2 sections. outside dimensions: 29" x 17 1/2" x 15 3/4" inside dimensions: bigger sections 22" x 16" Smaller sections 5" x 16"
|
|
|
Anvil ATA Flight-compliant Heavy Duty Wheeled Equipment Case 41" x 33.5" x 32.5"
Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. NOTE: This item can only be shipped to a U.S. destination. NO INTERNATIONAL SHIPPING PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in pictures. External Dimensions: 41.0" x 33.50" x 32.50" Single padded upper-shelf measures: 35.0" x 18.0" x 9.0" Four. 4) identical, non-padded(carpet lined) lower shelves measure: 26.0" x 18.0" x 5.0" Condition: Used. Very good condition. Latch(no keys) and casters and in very good condition. Solid, no damage, this unit will take a lot more abuse so your equipment wont. Estimated Packed Shipping Weight: 180.00 lbs. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured ... moreare included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Lister: PH Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday Email Address: Contact us through Ebay's messaging system. Phone: 408-762-7283, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the ord
|
|
|
JELCO ATA Anvil Type Hard Case 26"w x 17"d x 10.5"h - Rough But Ready
JELCO ATA Cases for electronics. Music gear, or other items Rough but Ready- Minor damage described below These cases were originally made for high end projectors. We used them to ship PCs around the country as well as packing some with multiple laptops. Projectors, etc. for trade shows and the like. Interior pieces are somewhat movable and can be modified by the removal and/or addition of foam. This case is well traveled having been shipped across the country multiple times. So the outsides may not be new or pretty, but what gets put inside stays perfect! This case has a few minor problems that do not impact its ability to protect what is inside. Inside is in perfect condition(as shown) End Bumpers/Rests are damaged(as shown) End of case has damage that causes no functional issues(as shown) Extension handle area has damage and handle is ... moretight but is fully functional(as shown) One wheel is a bit tight and has a slight flat spot but still functions(as shown) This has been shipped as overnight. 2 day, ground, etc. as well as being checked as luggage for cross country flights. Too big for carry on luggage. Cases measure 26"w x 17"d x 10.5"h Weight 30lbs Original price was over $600 each. Shipping at cost
|
|
|
Anvil Iron Case Shock Mounted Space Rack Case ATA Category 300 w/Locking Casters
cable computers AC Adapters servers networking electronics printers in titles& descriptions Click on thumbnails to enlarge images Item# AnvIron. Manufacturer: Anvil. Availability: Available while supplies last! Anvil Iron Case Shock Mounted Space Rack Case ATA Category 300 w/Locking Casters Personal Remarks: This case is in great shape for sure. With the strength for travel, this Anvil will not disappoint you. We have a few different style of the Anvil cases and have received them in good condition and want to give you the opportunity to grab them up. Look a little lower on the page and you'll see some more of the features for this case. Anvil Iron® is our most extreme line of defense. It utilizes an extremely tough defensive HDPE covering over the plywood that provides additional protection to cases that are constantly on the ... morego. And often subjected to forklift applications. The case wall is a custom laminated process that is composed of 1/8” high density solid core composite, precision bonded to top grade plywood, resulting in a case wall that is built to take abuse far exceeding traditional ABS cases. Enjoy! Paul• Condition: Used• Manufacturer: Anvil• Model Number: Iron• Sales Includes: Anvil Iron Case Shock Mounted Space Rack Case ATA Category 300 with Locking Casters. This item comes just as you see it in my photos. Thanks for checking out. We have more items like this on our Ebay store. I will let everyone know this case weighs 142 lbs, so it will need to ship freight. The cost for that will be around $185.00, but can change depending on where you live in the US. As always if you live in Arizona, come on it and you can just pick it up with no shipping cost. We'll even give you a tour of the facility. Quantity included: 1• Warranty: 30 Day Warranty- Guaranteed to Work! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Features· ATA Category 300. Specification 1 compliant· Steel split rivet construction· Heavy-duty steel ball corners· Premium. Large
|
|
|
Anvil Road Case / Equipment Transport Box (27.5 x 25 x 25 on Castors)
Foam lined 27.5 x 25 x 25 On castors Strong traveling case for your delicate instruments/equipment! Very good condition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-146e69c8e0a-0x106-
|
|
|
Anvil Hinged Lid 18x15x8 Breifcase size Band Music Road Hard Case
Description: Manufacturer: Anvil Manufacturers Model: Type of case: Hinged Lid Construction: My actual Approximate Measurements(in inches. Length x Width x Height) are: Case OD: 17 1/2 x 14 1/2 x 8 Case ID: 16 1/2 x 13 1/2 x 7( Hight ID is 4 + Base + 3 lid) Shipping dimensions: 18 x 15 x 8 Shipping Cube: 74… Oversize 2(Shipping Cube is Girth plus Length) Weight in lbs: 11 empty as shown About My Dimensions Inside Dimensions are max of the case without anything in it. No Foam. Outside Dimensions are max with all bumps and handles. Shipping dimensions is the max OD rounded up to the next inch as the shipper will do. Weight is as shown with whatever is in it and may not be an accurate reflection of the true weight of the case if it were empty. These dimensions are my eyeball on a tape measure(not a micrometer) Features: Dark Gray Color 2 Latches ... morePiano Hinge 2 Web Open Stays 1 Carry Handle Damage and Appearance of case or lot: Good/Fair older usable case. Normal Dust, Dirt, Scratches, Markings, Stickers, Dings for a used case, Foam and Vinyl Liner is patially missing patially loose and may be in need some re-gluing and or replacing. Looks like they had a divider or equipment mounted in them. There are some residual holes 3 on handle side and 6 on hindge side, check them out in the pictures. Quantity Available: 2(at time listing was created) My Inventory# Anvil DGry HL 18x15x8 G/F D16 of 2 Original Manufacturer Info: Please Be Sure To Read These Terms and Conditions Shipping Shipping to any USA and some foreign address can be found by using the eBay Calculator or follow the FedEx instructions below. The eBay calculator quotes shipping using the UPS and/or US Mail Calculators that are built into the eBay System. They calculate bases on the weight and dimensions of the package. If your items will fit into USPS Flat Rate boxes that may be your cost. If the calculator overcharges and you pay at the time of purchase to speed the process along I will be happy to refund any substantial overpayments. Dollars not c
|
|
|
JELCO ATA Anvil Type Foam Padded Hard Case Projector 26" x 17" x 11"
This is a Jelco ATA Anvil Type Hard Case with inside foam protection in good used condition with wear/ writing/ etc. from being shipped. This was made to hold a projector but can be reconfigured to protect pretty much anything that will fit. It has 2 side carry handles that are spring loaded as well as wheels and a telescoping handle so it can be rolled like a carry-on. The wheels turn freely. Outside this measures about 26” by 17” by 11” and the inside would measure 25 1/4” by 16 1/4” by 9 3/4” WITHOUT THE FOAM. Currently it has 2 1/4” thick foam on the top and bottom as well as foam on the sides.
|
|
|
Single Calzone/Anvil Custom Equipment Case Flight/Road Ready
Will sell all three cases for $390(originally each of these custom cases cost over $300) For electronic equipment. Cameras, lighting, musical instruments. Exterior dimensions vary from 9.5” to 10.5” high by 21” to 26.5” wide by 20.5” to 22,5” deep. Interior dimensions 18” x 17” x 6” Floor height with casters ranges from 27” to 31” Two of the cases have 20” x 4” partitioned side compartments. All have rugged 3”+ casters. Hasp locks. 1.5” to 2” Ester Foam cushioning, multiple handles and reinforced rounded exterior corners. Net Weights vary from 31 to 38 pounds.
|
|
|
LARGE ANVIL SHIPPING CASE WITH A RAMP, GOV OWNED
bidding on a large anvil shipping case. this was government owned case. the case in good shape. Some marks on it, needs cleaning outside. wheels are ok but needs replacing. we'll load for you.
|
|
|
Blue Anvil Carrying Case - 18" x 13.5" x 5"
Click thumbs to Enlarge Any additional photos will be below ePawnAmerica has 14 years of experience selling a wide range of items on eBay. We take pride in serving you! Check out our huge selection of diverse products. Everything we sell is guaranteed as described or your money back! Your satisfaction is our number one goal. Keep in mind that we offer hassle-free returns with prepaid return shipping. If you have any questions or problems. Please contact our Customer Service Representatives Dave or Kellie via email. You can also call us at 952-646-1775. Thank you for choosing ePawnAmerica! Blue Anvil Carrying Case- 18" x 13.5" x 5" Features and Benefits: Blue color 18x13.5x5 inches Heavy duty design Two clasps Carrying handle What's included: Blue Anvil Carrying Case- 18" x 13.5"x 5" Condition: Good Condition ... morePreviously Owned Outside of the case has some scratches and scuffs from previous use SKU: 11/10d3-232-036512-ps Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address! Shipping Carriers: SurePost. UPS& USPS 1-6 Day. We choose the shipping carrier at our discretion. Local Pickups: $5 per item handling fee. We send all of our pickup items once a week on Tuesdays to our local pickup location. If payment is made on Tuesday the item will not be available until the following Tuesdays. Combined Shipping: Shipping discounts are available when all the items on the same invoice are paid at once. Shipping is not combined if you pay for items individually. We offer a 30 Day Money Back
|
|
|
Anvil 1/2" Iron Industrial Shockmount Rack Case 18U 41" Depth FREE SHIPPING
This is a genuine Anvil industrial grade shockmount rack case. It is not a consumer-grade or music case. It has the capability to be shipped freight. Transported by forklift, or subject to a high degree of abuse. Furthermore, it provides shockmount rack protection for your sensitive electronic equipment that is not available on cheaper rack cases. The case features Anvil's signature 1/2" Iron construction, with a rare depth of 41" for very long equipment) 18U high, rear rails, and four extra-heavy duty casters(two of which have brakes) The case was overstock at a recently closed-out company. It was a display model that was never sold. Used or shipped, though it may have some minor wear. There are scratches or dents in places that are mostly hard to see, and the corners have some wear from the door being demonstrated. It is very ... morerare to find a case like this in absolute pristine condition, though. However, the case is fully functional, and does not have any structural damage, other than a few rivots popping on one of the lids. This does not affect operation, and could most likely be repaired. I am more than happy to answer any questions you may have about this product. The case's wholesale value to resellers was $2228. So the retail value would be more. I will ship this for free anywhere within the contiguous US. Case can not be returned. If upon receiving the case. There is damage from transporting it to you, you must get in touch with me, and I can file a claim with the shipping company. I have many other cases like this for sale. Please take a look.
|
|
|
LARGE A&S ANVIL ROAD FLIGHT SHIPPING CASE 68 RACK SPACE
LARGE A&S ANVIL ROAD FLIGHT SHIPPING CASE 68 RACK SPACE Case is in like new condition. It was never taken out on the road. It has a total of 68 rack spaces. 34 on each side. It has casters with breaks in them. It was customed made by A&S cases in LA. Shipping will have to be arranged after purchase. Pick up if preferred.
|
|
|
Shipping Case 31" Calzone/Anvil Custom Equipment Case Flight/Road Ready
table{ td{ padding: 0px; color: black; font-size: 12pt; font-weight: 400; font-style: normal; text-decoration: none; font-family: Calibri.Sans-serif; vertical-align: bottom; border: medium none; white-space: nowrap; xl63{ font-family: Cambria; vertical-align: middle; white-space: normal; For Electronic Equipment, Cameras, Lighting, Musical Instruments. Floor Height w/Casters 31" Exterior Case 27"x 21"x 10" Interior Equipment Size 18"x 17"x 6" In addition to Equipment space this unit has a separate 19" long by 4" wide by 6" deep Accessory Compartment. Net Weight = 34 lbs; Rugged 3" Casters; Hasp Locks; 1 1/2" Thick Ester Foam Cushioning.
|
|
|
Shipping Case 27" Calzone/Anvil Custom Equipment Case Flight/Road Ready
For Electronic Equipment. Cameras, Lighting, Musical Instruments. Floor Height w/Casters 27" Exterior Case 22"x 23"x 11" Interior Equipment Size 18"x 17"x 6" Net Weight = 39 lbs; Rugged 3 3/8" Casters; Hasp Locks; 1 1/2" Thick Ester Foam Cushioning.
|
|
|
LARGE ANVIL TRADESHOW FLIGHT CASE UNIVERSAL PROTECTIVE STORAGE CASE
LARGE BLUE COLOR ANVIL HEAVY DUTY FLIGHT CASE W/ WHEELS Professionally cases use for Transporting musical instruments. Electronic equipments, and other valuables. 51.5" x 46.5" x 26" Contact me with zip code for a s/h quote or make an offer?
|
|
|
Anvil Rolling Equipment Case Vibration Isolation 16" x 21" x 25 1/2" w/ Handle
This auction is for a Anvil Equipment Case. This has a vibration isolated bottom. There are 8 mounting screws which have isolators underneath. Outside dimensions are 16" x 21" x 25 1/2" Bare weight is 30lbs. This is in very good condition. With the exception that 2 of the mounting feet have been pushed in. Take a look at the pictures. UPS must have dropped the box. And these were pushed in. I was going to fix it, but will leave that to you. If you want better pics, just ask. Will ship by slapping a shipping label directly on the box. If you want me to do something different. Just ask. Thanks for looking.
|
|
 |