|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: 宝安区, China Welcome To Fibica Follow Daily Mart on: New Leadshine MA860H 2.4 Phase Stepper Motor Drive Up to 80VAC/110VDC 7.2A Product Description, The MA860H is ... morea high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology(self-adjust current control parameters) according to different motors. The driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors. Availability: Customize Usually Ships within 2-4days Any Questions: Feel free to contact our specialist for any compatibiltiy problems. Quantity: 1, If you have any questions. Please inform us by eBay message. Product Detail, Why Daily Mart? Payment Method, International Shipping, Return& Warranty, High performance. Cost-effective, Supply voltage up to 80VAC or +110VDC, Output current up to 7.2A, Self-adjustment technology, Pure-sinusoidal current control technology, Pulse input frequency up to 300 KHz, TTL compatible and optically isolated input, Automatic idle-current reduction, 16 selectable resolutions in decimal and binary. Up to 51,200 steps/rev, Suitable for 2-phase and 4-phase motors, Support PUL/DIR and CW/CCW modes, Short-voltage. Over-voltage, over-current and short-cicuit protection, Model: MA860H. Phase: 2. Control Mode: Step& Dir. Or CW/CCW. Max Input Frequency: 300Khz. Input Voltage Range: 36- 80 VAC/ 50- 100 VDC. Suggested Power Supply Voltage Range: 36-90 VDC/24-60 VAC. Output Current: 1.80- 7.20 A. of DIP Switch Resolution Configurations: 16. DIP Switch Resolution Setings: 400. 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000. of DIP Switch Current Configurations: 8. DIP Switch Current Configurations: 2.40A. 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A. Logic Current Range: 7-16mA(10mA typical) Logic Voltage Range: 4
Buy It Now
Free Shipping Condition: New Location: China Brand Cloudray MPN Does Not Apply UPC 053554517166.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States
Buy It Now
$31.50 Shipping Condition: New Location: China 2DM556 driver greatly improves stability and reduces noise under low subdivision. The new 32-bit DSP technology. Driver 2 phase step motor with 4leads,6leads ... moreand 8leads. Output Current (Peak). current will automatically halved when stand still.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 PCS Nema 34 stepper motor with Single shaft, 1600oz. in, biloar. 3 PCS Stepper motor driver, peak 7.8A 24-80VDC. Nema 34 stepper motor Hording torque ... morewhen DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States Product Name: 1pcs Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for arduino Basic Attributes Name Double H Bridge Motor Driver Module ... moreWorking mode Drived by H bridge(double lines) Control chip L298N? ST? Logical voltage 5V Driving voltage 5V? 35V Logical current 0mA-36mA Driving current 2A(MAX single bridge) Storage temperature? 20? +135? Maximum power 25W weight 30g Periphery dimension 43*43*27mm Product features: 1.Using L298N made by ST company as the control chip.The module has such characteristics as strong driving ability.Low calorific value and strong anti-interference ability. 2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip.Please use an external 5V logic supply when using more than 12V driving voltage. 3.Using large capacity filter capacitor.This module can follow current to protect diodes,and improve the reliability Real figure? L298N is a kind of high voltage.High current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V)large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well. Port function? Circuit principle diagram? This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V. It can enable the on
Buy It Now
$23.00 Shipping Condition: Used Location: Israel Motor and Engine Parts. The item may be a factory second or a new, unused item with defects. An item that does not function as intended and is not fully ... moreoperational. Health&Beauty. An item that has been used previously.
Buy It Now
$15.76 Shipping Condition: New Location: Ridgefield, United States The 2DM556 is a two phase digital stepper driver based on DSP. Its Micro step resolutions and output current are programmable. Its unique features make ... morethe 2DM556 to be an ideal solution for applications.Features.
Buy It Now
Free Shipping Condition: New Location: China Brand cloudray Suitable Stepper Motors Nema 17 23 34 Output Current 1.0A-5A Model DM542S Max Pulse Input Frequency 200 kHz MPN Does Not Apply Weight 278g ... more/ 9.81oz UPC 661021758709.
Buy It Now
Free Shipping Condition: New Location: China DM556 Digital Stepper Motor Driver 2 Phase 5.6A for Nema23,34 Stepper Motor. 3A T7128 128 High Subdivision Stepper Motor Driver THB7128 4257 Stepper Drives. ... moreLv8731 Stepper Motor Driver 2-Phase Stepper Motor Driver 2.0A 16 Subdivision.
Buy It Now
Free Shipping Condition: New Location: China (Phase Inductance. Phase resistance. Step Angle. Motor Length. Rated current. excluded.). Holding torque. Shaft length.
Buy It Now
$25.00 Shipping Condition: New Location: China Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM542A:(Nema23 stepper motor use DM542A driver).
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, whats more, the positioning accuracy is ... morealso higher. Prohibition of combustible gases and conductive dust.
Buy It Now
Free Shipping Condition: Used Location: Malaysia Used: An item that has been used previously. -For item condition not as described, defective.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Holding torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. 1 PC Stepper motor driver DQ542MA.
Buy It Now
Free Shipping Condition: New Location: China (Excluded.).
Buy It Now
Free Shipping Condition: Used Location: Malaysia It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. 16 selectable microstep resolutions including ... more400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000,5000, 8000, 10000, 20000, 40000.
Buy It Now
$3.74 Shipping Condition: New Location: China It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. We will not take any such responsibilities. ... moreInput reverse connection protection: Yes.
Buy It Now
$2.84 Shipping Condition: New Location: China seemmy999 Picture Presentation Product Description. 1x Blue PCB Board ULN2003 Driver Module Stepper Motor Driver Board Chip NEW Article-Nr.5200132 Product ... moreDetails: ULN2003 Driver Module Condition: New ULN2003A motor driver chip Chip all the pins already leads for easy connection to use 5-12V power supply 4-way signal indicator XH-5P socket. Can be connected directly 28BYJ-48 Model stepper motor PCB board size: 40.5 x 21.3 mm Color and more details are shown as pictures PLS NOTE that due to lighting effects, monitor's brightness/ contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item! Package Included: 1 x ULN2003 Driver Module Shipping. All the items will be dispatched within 1 business day by Airmail after the payment is clear. Items will arrive in 7-25 business days. The arrival time depends on some factors and different areas: Please choose some local sellers. If you cannot wait patiently in the shipping time we declared. Once you purchase. Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly. Returns& Refunds. All the products we are selling include factory warranty. Don't cover items that have been abused, burned and damaged in any form. Please contact us via eBay Message if you have NOT received item in 30 days. We will check it with post office, and then resend or refund any missing item. In the unlikely event that your product is faulty in anyway. You must contact us ASAP and then return it within 14 Days of receipt. The postage and packaging fee will NOT be refunded. We will not be responsible for the delivery or insurance charges incurred in returning item back to us. If you return an item purchased from us. It must be back in Factory Condition. This includes packaging, inserts, manuals etc. Please allow up to 5 Working Days for us to process your returned item. Payment. We accept PayPal only. Payment must be received within 3 Days fr
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Parker SX6-DRIVE Compumotor Stepper Motor Drive, 2-Phase Hybrid, 120VAC 50/60Hz. Compumotor Stepper Motor Drive. Parker Hannifin. # of Axis: 1. Motor ... moreType: 2-Phase Hybrid Permanent Magnet 1.8°. Motor Current: 0.1-6A, 0.2-8A.
Buy It Now
Free Shipping Condition: New Location: Raleigh, United States Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8). 10, built-in thermal protection and overcurrent protection. 9, provide ... moreenergy semiautomatic current lock function;. 7, offline hold function;.
Buy It Now
Free Shipping Condition: New Location: United States Speed Response Rate: 100KHz. Specification: 2 Phase 4 Wire Bipolar Type. Feature: 1. 2 Part Composition: Composed of 2 parts, driver and wiring. Applicable ... moreMotor: The stepper motor driver is suitable for 24 28 35 29 42 57 and other 5 wire, 6 wire, 8 wire and other 2 phase micro stepping motors.
Buy It Now
$3.50 Shipping Condition: New Location: China Features Brand new and high quality. Diameter: 27mm. Voltage: 12V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor ... morecan be driven by ULN2003 chip. It also can be connected as 2 phase to use Original box: No Color: Silver Item size: 31*27*19mm Net weight: 35g Package Included: 1PCS* 12V 4-phase 5-wire stepper motor gear motor module 28BYJ-48-12V Similar Products $14.98 Time left:5d 19h 55m. $2.60 Time left:1d 9h 32m. $42.11 Time left:5d 20h 47m. $14.98 Time left:16d 0h 48m. $3.19 Time left:29d 10h 0m. $3.77 Time left:6d 3h 57m. $7.54 Time left:6d 3h 57m. $1.17 Time left:29d 9h 59m. $5.68 Time left:29d 10h 1m. $4.48 Time left:9d 8h 11m. $14.79 Time left:6d 0h 38m. $2.26 Time left:14d 1h 13m. $3.33 Time left:5d 19h 43m. $1.30 Time left:2d 11h 40m. $18.78 Time left:6d 3h 57m. $3.75 Time left:24d 22h 0m. $6.55 Time left:14d 1h 13m. $3.33 Time left:16d 0h 48m. $2.38 Time left:2d 11h 52m. $34.89 Time left:5d 20h 2m. $8.99 Time left:5d 19h 55m. $37.66 Time left:6d 3h 57m. $34.99 Time left:5d 19h 55m. $3.13 Time left:11d 8h 39m. $4.88 Time left:18d 9h 34m. $3.50 Time left:13d 3h 38m. $6.60 Time left:13d 3h 38m. $19.50 Time left:13d 3h 38m. $13.44 Time left:14d 1h 13m. Shipping& Handling Shipping Time: The items you ordered will be shipped out in 1-2 business day by Hong Kong Post Air Mail when your payment is clear. Payment We accept PayPal only. We only ship item to your PayPal verified address. Payment must be received within 5 Days from the date of purchase. Return Policy All the products we are selling include factory warranty. Don’t cover items that have been abused, burned and damaged in any form. Please contact us via eBay Message if you have NOT received item in 30 days. We will check it with post office, and then resend or refund any missing item. In the unlikely event that your product is faulty in anyway. You must contact us ASAP and then return it within 7 Days of receipt. The postage and packaging fee will NOT be refunded. We will not be responsible for the delivery or
Buy It Now
$3.40 Shipping Condition: New Location: China 1 DM542X digital DSP 42/57 stepper motor driver". Can drive 42 57 86 4-wire 8-wire two-phase stepper motor. If there is a short circuit, open circuit ... moreand phase difference, the main board ALM warning light will flash, and the driver will not work.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Nema42 Stepper Motor 3phase 12Nm Closed-Loop Hybrid Servo Driver Encoder Kit CNC Package Included : 1 x Stepper Motor 1 x Stepper Driver 1 x Encoder Cable ... moreApplications : Advertising industry, Engraving, packaging, lasers, electron industry, medical industry, Printing industry, woodworking, machinery industry, Ceramic Industry, stone industry and so on. Brief Introduction : 2HSS two phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.This product has the advantage of both step and servo system, is a highly cost-effective motion control products. .
Buy It Now
Free Shipping Condition: Used Location: Malaysia SERVO DRIVE.
Buy It Now
Free Shipping Condition: New Location: Mentor, United States PORTESCAP - GC26M048A30V - Motor, Stepper. 5V, 10:1 Gear Box, 4 Phase 6 Wire. Note: Danaher / Portescap. Tiny 5V Mighty Miniature, with Heavy 10:1 gear ... morebox. Shaft: 3mm (0.125”) Knurled Shaft 7.5mm Long.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Features: 1. 100% brand new and high quality. 2. Bipolar constant current chopper 3. High-speed optocoupler signal isolation input 4. Electrical input ... moresignal is TTL compatible 5. Stationary current is automatically reduced by half 6. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices. 1. 9V-42V DC power supply 2. H bridge bipolar constant phase flow drive 3. the maximum 4.0A of the eight kinds of output current 4. the largest 32 subdivision of the 6 models are optional 5. input signal high speed photoelectric isolation 6. common-anodestandard single pulse interface 7. offline to maintain the function 8. semi closed enclosure can be adapted to a more stringent environm.
Buy It Now
$3.77 Shipping Condition: Neu Location: China Nano Sheild. It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. Adaptive motor: ... moreStepper motor. The distance / speed / delay / number of cycles can be saved and set after power down.
Buy It Now
$3.20 Shipping Condition: New Location: China Description Brand new with high quality Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% ... more25℃) Insulation Resistance: 10Mω(500V) Insulation Grade: A No-load Pull in Frequency: 600Hz No-load Pull out Frequency: 1000Hz Pull in Torque: 34.3mN.m(120Hz) Detent Torque: 34.3mN.m Temperature Rise: Noise: Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct. Package Included: 1 x Stepper Motor Driver Board Module ULN2003 for 5V 4-phase 5 line 28BYJ-48 Arduino Recommended Products $2.78 Time left:27d 19h 23m. $2.48 Time left:11d 22h 33m. $2.98 Time left:15d 23h 48m. $3.20 Time left:29d 23h 46m. $1.97 Time left:29d 19h 26m. $4.99 Time left:2d 21h 14m. $2.04 Time left:11d 22h 50m. $6.75 Time left:2d 21h 24m. $1.29 Time left:11d 22h 37m. $3.66 Time left:2d 21h 48m. $2.58 Time left:28d 22h 14m. $6.56 Time left:2d 20h 48m. $6.22 Time left:23d 23h 53m. $14.12 Time left:1d 17h 53m. $1.68 Time left:28d 21h 46m. $3.38 Time left:28d 21h 46m. $2.62 Time left:2d 21h 3m. $16.00 Time left:23d 23h 37m. $5.10 Time left:2d 22h 1m. $6.83 Time left:1d 17h 53m. $6.98 Time left:23d 23h 27m. $29.36 Time left:1d 17h 53m. $32.00 Time left:23d 23h 37m. $5.58 Time left:23d 21h 40m. $6.98 Time left:2d 20h 48m. $3.83 Time left:14d 22h 41m. $12.54 Time left:20d 22h 37m. $11.85 Time left:2d 21h 14m. $8.53 Time left:2d 21h 48m. $3.32 Time left:21d 1h 19m. $9.98 Time left:11d 19h 50m. $14.78 Time left:3d 5h 32m. $21.15 Time left:20d 23h 56m. $14.96 Time left:20d 23h 57m. $14.93 Time left:8d 2h 24m. $2.24 Time left:1d 2h 51m. $42.10 Time left:7d 19h 6m. $12.85 Time left:23d 20h 38m. $7.98 Time left:19d 22h 49m. $24.39 Time left:2d 21h 14m. $42.88 Time left:2d 1h 56m. $16.68 Time left:2d 21h 24m. $14.97 Time left:29d 20h 18m. $32.88 Time left:2d 21h 24m. $17.08 Time left:2d 21h 48m. $12.58 Time left:2d 22h 1m. $5.26 Time left:2d 21h 3m. $9.08 Time left:2d 21h 3m. Payment We accept PayPal only. But w e only Accept your Ebay Address.Please Make sure it
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$23.00 Shipping Condition: Used Location: Israel For sale is an ORIENTAL MOTOR Co. VEXTA 2 phase stepper motor driver. Model CSD2112-T, with a 1.2 Amp per phase output rating, 24/36VDC 1.6Amp input, ... morenew in its original box. Please do your own due diligence to insure that this item is appropriate for your needs. You will receive the motor driver shown in the pictures. Thanks for looking.
Buy It Now
$18.05 Shipping Condition: Used Location: Brockport, United States Hardware required for key functions to be tested may have been removed after testing (e.g. hard drive). F3 - Key Functions Working. May be missing components ... moreor parts not essential to key functions. Zero defects.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Compumotor Stepper Motor Drive. # of Axis: 1. Parker Hannifin. Motor Type: 2-Phase Hybrid Permanent Magnet 1.8°. Motor Current: 0.1-6A. If you do not ... morehave an account No Worries! Office Hours The Original Manufacturer's warranty does not apply.
Buy It Now
$7.41 Shipping Condition: Gebraucht Location: Fuchsstadt, Germany UP for sale is one Piece SLA7032M Condtion: New IMPORTANT NOTICE Our shipping Method and Expect to Arrival date: USA customers: By DHL Global Mail service ... morewith tracking- Lead time 5-12 days UK. Germany and European Countries: 1. Standard Service: We use Courier service to UK/ DE then by Local Mail- ONLY 4 days to UK; 7-14 days to EU countries. No tracking 2. Economy Service: We use Hong Kong Post Air mail service- 3-4 weeks) No Tracking 3. Tracking: USD3-10 extra. Please contact us for the extra service Shipping Method Summary Standard Shipment(Default) Economy Expedited USA. Russia DHL Global mail service. 7-12days. With tracking(USA buyer) E-packet/ EC-Ship 10-18 days. With tracking UPS for USA(3days) EMS for Russia(5-7days) UK. Germany, Poland or EU Courier + UK/DE mail service. 4-10 days. No tracking Normal air mail. 3-4 weeks. No tracking DHL( 3-4 days) Brazil. Argentina, South America Registered mail. 2-3 weeks. With tracking Normal air mail. 4- 6 weeks. No tracking EMS/Fedex/DHL(5-7 days) Rest of the World Registered mail. 2-4 weeks. With tracking Normal air mail, 3- 6 weeks. No tracking Please call the lead time + Price Duties and Customs Declarations: Buyer response for all customs duty and import tax involved. Purchase under GBP40 Free tax for UK. Germany& EU(Standard mail service) Combine Shipment: Same item with multiple quantities: USD6 +(N-1)0.1 where N is purchased number Different items with multiple quantities: USD6 +(N-1)0.1 + USD3 +(M-1)0.1. where M.N is purchased quantities Order Preparing Lead time: We need about 0-3 BUSINESS DAYS to handle the order after cleared payment. For DHL or courier service. We will do our best to shorten preparation lead time at 0-1 days. If you want to know the exact ETD, Pls contact us before you bid. Handling Fees: Handling Fee is included in the Shipping. Minimum order quantity is only one pieces up. PAYMENTS METHOD 1. Paypal(Prefer) 2. Bank Transfer( Buyer will take care the bank charges) REFUNDS& RETURN We offer a warran
Buy It Now
Free Shipping Condition: New Location: China Model DM542S Suitable Stepper Motors Nema 17 23 34 Output Current 1.0A-5A Max Pulse Input Frequency 200 kHz Weight 278g / 9.81oz MPN Does Not Apply Brand ... moreUltrarayc UPC 721618880098.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. We will not take any such responsibilities. ... moreInput reverse connection protection: Yes.
Buy It Now
Free Shipping Condition: New Location: Secaucus, United States TB6600 stepper motor driver suitable for 86/57/42 type two-phase hybrid stepping motor with phase current below 4.0A, Nema 17 23 34 Stepper Motor Driver ... more(42x42mm to 60x60mm). - 4 x TB6600 Stepper Motor Driver.
Buy It Now
Free Shipping Condition: New Location: China 1PC DRIVER DQ2522MA Stepper Motor Driver 0.5A-5.0A 0.5-7A peal. Stepper Motor Driver Our Stepper Motors are used on small to mid-sized CNC mills or milling ... moremachines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$16.40 Shipping Condition: Used Location: Cotati, United States We just decommissioned a system that had these units driving Vexta 5-Phase motors. All are in good working order. Type: 5 Phase Stepper Motor Driver For ... moreVEXTA/Oriental Stepper Motors or any 24V 5-Phase Motor.
Buy It Now
$45.00 Shipping Condition: New Location: China 3DM3422 3phase NEMA34 stepper motor driver 32bit DSP AC220V 4.8A JMC.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States
Buy It Now
Free Shipping Condition: New Location: United States 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. 10 x 5V Stepper Motor 28BYJ-48. It also can be connected as 2 phase to use. Step angle: ... more5.625 x 1/64. Original box: No. Color: Silver.
Buy It Now
Free Shipping Condition: New Location: New York, United States Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line). the maximum output current of 4.0A eight optional;. standard common ... moreanode single pulse interface;. Color: See pictures.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 pcs Nema 23 stepper motor 435 oz.in bipolar 23HS9442. Nema 23 stepper motor. Stepper motor driver DM542A Hording torque when DM542A run under high speed ... moreis also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$3.00 Shipping Condition: New Location: China seemmy999 Picture Presentation Product Description. 1x Blue PCB Board ULN2003 Driver Module Stepper Motor Driver Board Chip NEW Article-Nr.5200132 Product ... moreDetails: ULN2003 Driver Module Condition: New ULN2003A motor driver chip Chip all the pins already leads for easy connection to use 5-12V power supply 4-way signal indicator XH-5P socket. Can be connected directly 28BYJ-48 Model stepper motor PCB board size: 40.5 x 21.3 mm Color and more details are shown as pictures PLS NOTE that due to lighting effects, monitor's brightness/ contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item! Package Included: 1 x ULN2003 Driver Module Shipping. All the items will be dispatched within 1 business day by Airmail after the payment is clear. Items will arrive in 7-25 business days. The arrival time depends on some factors and different areas: Please choose some local sellers. If you cannot wait patiently in the shipping time we declared. Once you purchase. Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly. Returns& Refunds. All the products we are selling include factory warranty. Don't cover items that have been abused, burned and damaged in any form. Please contact us via eBay Message if you have NOT received item in 30 days. We will check it with post office, and then resend or refund any missing item. In the unlikely event that your product is faulty in anyway. You must contact us ASAP and then return it within 14 Days of receipt. The postage and packaging fee will NOT be refunded. We will not be responsible for the delivery or insurance charges incurred in returning item back to us. If you return an item purchased from us. It must be back in Factory Condition. This includes packaging, inserts, manuals etc. Please allow up to 5 Working Days for us to process your returned item. Payment. We accept PayPal only. Payment must be received within 3 Days fr
Buy It Now
Free Shipping Condition: New Location: United States Holding torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver. 7 8 channels output phase current setting.
Buy It Now
$5.35 Shipping Condition: New Location: Villa Park, United States Dual motor driver chip L9110S. Can drive two DC motors, or a 4-wire 2 -phase stepper motor. OA1 OB1 DC 2 -pin connection, without direction. OA2 OB2 DC ... more2 -pin connection, without direction. PCB size : 2.8cm 2.1cm ultra- small size, suitable for assembly.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States Mounting bracket is chipped.
Buy It Now
Free Shipping Condition: New Location: China MPN Does Not Apply Brand Cloudray UPC 053554516992.
Buy It Now
$12.45 Shipping Condition: New – Open box Location: Buford, United States DMA860H is a low‑noise digital stepper motor driver with high efficiency. Product Model: DMA860H. Item Type: Stepper Motor Driver. Motor Interface: A+ ... moreand A- are connected to the positive and negative ends of the A-phase winding of the stepping motor; B+ and B- are connected to the positive and negative ends of the B-phase winding of the stepping motor.
Buy It Now
Free Shipping Condition: New Location: Del Mar, United States New CNC MACH3 USB 6 Axis Interface Breakout Board Adapter For Stepper Motor Driver#A145A. Click To Enlarge MACH3. CNC software for mainframe computers ... moreand peripheral power control signal transfer and processing. Feature 1, all output and input models by Philips dedicated high-speed chip processing. The signal is an integer, amplification, eliminating unnecessary interference signal. The operation of the machine more stable. 2. USB and external power supply. The power supply isolation. Computer and data processing machines more secure 3, all of the input signal by the optical coupling isolation all of which P11. P12 port for high-speed optical coupling can be used to connect the spindle encoder, or hand- wheel A. B equal to demanding signal. 4, there is a special off the total electric power supply of the relay, the computer shuts down automatically when carving machine with other equipment, turn off all power. 5, there is a special relay switch coolant supply, support MACH3. G code programming( parallel port P3. G code to open M8. M9 off) the relay switch on the lights. Easy to determine the power off. 6, there is a spindle-powered ad hoc relay support MACH3. G code programming( parallel port P2 I. G to open the code M3. M2 off) the relay switch on the lights. Easy to determine the power-off 7. On the spindle speed control: special high-speed optical coupling isolation, can output PWM signal output for the parallel port P1. 8, the interface board have a PWM to 0-10V digital-analog conversion circuit. Can output 0-10V level to control the market and control the speed of only analog converter. To control the spindle speed. Output for the parallel port P1. 9. The interface board can be connected common cathode or common anode output to the stepper drive or servo drive. Output for the 5V level. 10. Wide voltage power supply, 12V or 16-35V can choose a set of two power supply. Reversed with anti- power input design. 5 input port： Port description P10 X limit P11 on the knife P
Buy It Now
Free Shipping Condition: New Location: China This driver board can drive 2-phase 4 wire/4-phase 5 wire stepper motors. 1 x Stepper Motor Driver Board. It features 4 working modes: Normal Mode 1, ... moreNormal Mode 2, Jog Mode and Automatic Round-trip Mode.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States Recently removed from working service and guaranteed functional. Cosmetically in fair condition and has wear from previous use including blemishes, scuffs, ... moreand scratches. Includes Stepper Motor - cut cable as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. Thank you for checking out our listing. .
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 pcs Nema 23 stepper motor 270oz. in bipolar 23HS8430 Single shaft. Nema 23 stepper motor Step Angle: 1.8 degree. Shaft:Single Shaft. Front shaft length ... more21 mm. Number of wire leads: 4 ( Black A+, Green A-, Red B+, B lue B- ).
Buy It Now
Free Shipping Condition: New Location: China Motor phase resistance: about 14.5 ohm. 5PCS L298N 1.5A 2Way MX1508 DC PWM Speed Dual H-Bridge Stepper Motor Module. 240W Semiconductor Refrigeration ... moreThermoelectric Peltier Cold Plate with Fan. Then drive the precise slanting rod.
Buy It Now
Free Shipping Condition: Used Location: Glendale, United States Featured with 4 optically isolated singled-ended inputs, for sinking or sourcing signal theNI SMD-7615 (Part Number: 783595-01 ) is a Stepper Motion Drive ... moreDevice. These features include electronic damping, torque ripple smoothing, and microstep emulation.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Manufacturer: Autonics. Autonics Item Number: A50K-M566 - R10. Item: Stepper Motor. this stepping motor is for locations with limited space and. Shaft ... moreType: Rotary Actuator. Mounting Pattern: 72mm Dia Bolt Circle.
|
|
|
 |