|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$3.00 Shipping Condition: New Location: China Description This module is blue PCB now.Please know it. The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping ... morebipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting. Overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) 1）Simple step and direction control interface 2）Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 3）Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates 4）45 V maximum supply voltage 5）Built-in regulator(no external logic voltage supply needed) 6）Can interface directly with 3.3 V and 5 V systems 7）Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout 8）Short-to-ground and shorted-load protection 9）4-layer. 2 oz copper PCB for improved heat dissipation 10）Exposed solderable ground pad below the driver IC on the bottom of the PCB 11）Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet(1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil(see the Power Dissipation Considerations section below for more information) Here are some of the driver’s key
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Questions? Call us: 1-877-328-9236. Cetronic Ltd HY200-2220-0100-ARM8 84V/1.0A Stepper Motor AISS w/ Cable. Manufacturer: Cetronic Ltd Model: HY200-2220-0100-ARM8 ... moreCondition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Cetronic Ltd Condition: Used. Comes in non-original packaging. There are scratches on the outer assembly from previous usage. The stepping motor and cables are in good condition. Notes: The stepping motor and cable were pulled from a working environment. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Cetronic Ltd HY200-2220-0100-ARM8 Stepper Motor, 1) Cable. 6-pin, Specifications: Manufacturer: Cetronic, Model: HY200-2220-0100-ARM8, Size 23 step motor, Holding Torque up to 1425 Ncm, 84 Vmax, 1.0A/ph, SKU: N24N016 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment mu
Buy It Now
Free Shipping Condition: New Location: United States Input: 1-5A Current, Select Drive Stepper Motor. ERR: Red Light, Power, Indicator Light, Power Indicator. Feature: 1. The half- function is a 200ms step ... morepulse, and the driver output current is automatically reduced to 50% of the rated output current to prevent motor heating.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States This module is based on the original imported Toshiba stepper motor drive chip THB6128 design, can drive 57 and the following two-phase four-wire stepper ... moremotor. 1 X THB6128 Stepper Motor Driver Module.
Buy It Now
$15.45 Shipping Condition: Used Location: Massillon, United States Item pictured is the unit you will receive. We are here to serve you! CHECK BACK OFTEN. WE UPDATE OUR INVENTORY REGULARLY. Buy It Now. DYNAREX 200 4"x4" ... moreCOTTON GAUZE SURGICAL SPONGE PAD 8-PLY GAUZE NON STERILE 3242.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, whats more, the positioning accuracy is ... morealso higher. Prohibition of combustible gases and conductive dust.
Buy It Now
$3.00 Shipping Condition: New Location: 普陀区, China The DM860A is a new generation of high performance digital stepper motor drivers. It can effectively reduce the noise and vibration during motor operation, ... moreand has the characteristics of low noise, low vibration and low temperature rise.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States This 3 axis kit features 3 Gecko G251x micro stepping drives that include. the industry leading 3 year US warranty, and full US based tech support. and ... morethree Nema 23 600oz motors. Resistors for these motors are also included for the G251x drives.
Buy It Now
Free Shipping Condition: New Location: China JMC 2DM860H NEMA23 NEMA34 stepper motor driver 32bit DSP. 1 x JMC 2DM860H NEMA23 NEMA34 stepper motor driver. 2DM860 driver greatly improves stability ... moreand reduces noise under low subdivision. The new 32-bit DSP technology.
Buy It Now
$5.35 Shipping Condition: New Location: Villa Park, United States Can drive 4 DC motors or 2 stepper motors or 2 Servo. Up to 4 bi-directional DC motors with individual 8-bit speed selection. Up to 2 stepper motors (unipolar ... moreor bipolar) with single coil, double coil or interleaved stepping.
Buy It Now
$71.00 Shipping Condition: Used Location: Philippines We will then arrange the booking and pick-up service.
Buy It Now
Free Shipping Condition: New Location: China 5 PCS 28BYJ-48 4 Phase Gear Stepper Motor DC 5V 1/64 Reduction Ratio+ULN2003 Driver Board kit For Arduino Description: Type: Hybrid Phase: 4 Holding Torque: ... more1 / 64 Current / Phase: 5V Diameter: 28mm Step angle: 5.625 x 1 / 64 Reduction ratio: 1 / 64 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase. A, B, C, D four-phase LED indicates the status of the stepper motor work. 5 Line 4 phase can be driven by ordinary uln2003 chip, can also be connected in phase 2 development board used for. Document link: https://www.youtube.com/watch?v=iTNddDzJJm4 Package includes: 5 X 28BYJ-48 Stepper Motor 5V 5 X ULN2003 Driver Board See more in the flyfuntech2022.
Buy It Now
$32.46 Shipping Condition: Used Location: Canada
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 4 pcs Nema 23 stepper motor 425 oz.in bipolar 23HS9430B Dual shaft. Nema 23 stepper motor Stepper motor driver DM542A Hording torque when DM542A run under ... morehigh speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$48.49 Shipping Condition: Used Location: Canada
Buy It Now
$40.85 Shipping Condition: New Location: Spring Hill, United States This system is built around the Gecko Drive G540 digital integrated micro stepping 4 axes driver system. I also include the matching resistors for the ... moreG540 . These motors are the largest torque Nema 23 motors available.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 4HP 4 Stroke Outboard Motor Fishing Boat Engine with Air Cooling System CDI 1Set. Complete Kit: The combination of a funnel, a split pin, complete installation ... moretool and storage bag, which provides more convenience for your use and storage, and you do not need to buy extra.
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States Manufacturer: DIGIPLAN. Model #: 1073. This Item Is From A Working Machine and we have no way of testing it. This item was removed from aWorking Machine, ... moreand is being. They do not allow us to look at your rates that you are getting with them.
Buy It Now
$13.18 Shipping Condition: New – Open box Location: Rochester, United States For sale is 1 New Exelectric W43/08 2 Phase 1.8 Step Motor 3.0A 1.0 Ohms. Overall this item is in Excellent Condition. Step Motor.
Buy It Now
Free Shipping Condition: New Location: China Model: DM556. Application: 42/57 stepper motor. Low speed zero vibration, and low noise. 1 Steeper Motor Driver. Bipolar constant current PWM drive output. ... moreIf you do not receive our reply within 48 hours, pls.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$49.99 Shipping Condition: New Location: 龙岗区, China 1. Package Included : 1 x Nema34 12.5NM Closed-loop stepper 1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 36V/48V 350W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller Product Feature: Voltage: 36V/48V Wattage: 350W Throttle : 1-4V Short ... morevoltage protect :31.5±0.5V/42±0.5V Color: silver Dimension: 105 x 70 x 35mm/4.13 x 2.76 x 1.38" Casing material: Aluminium How to use? Turn off the power before wiring. 1. Connect the learning switch. 2. Connect the motor wire(phase A, phase B, phase C). Then connect the hall plug. 3. Connect the power and the twist grip plug. .
Buy It Now
$74.80 Shipping Condition: New Location: 龙岗区, China 1 x Nema34 4.5NM Closed-loop stepper. Stepper Motor & Driver. 1 x Stepper Driver. Servo Motor & Driver. motor with VFD kits, servo motor and servo drive ... morekits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping Condition: New Location: United States 1PC Nema17 Bürstenlosen Motor Driver DM542. 1PC Hybrid stepper/step Motor Driver, 1.0-4.2A,, 18~50VDC. 8 channels output phase current setting. Storage ... moretemp. Motor torque is related with speed, but not related with step/revolution.
Buy It Now
Free Shipping Condition: New Location: China DRV8825 is a DMOS microstep driver with converter and overcurrent protection. The DRV8825 interface is suitable for applications where complex microprocessors ... moreare unavailable or overloaded. Stepper Driver.
Buy It Now
Free Shipping Condition: New Location: United States Model: TB6600. It is an updated version of TB6600 4A stepper motor driver. Feature: 1. Original stepper motor driver chip, the current is selected by ... moreDIP switch. Item Type: Stepper Motor Driver. Common anode single pulse interface standard;.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China 3 pcs Stepper Motor Driver 2 Phase 4.5A step Motor Drive Controller 2 Phase 4.5A micro stepper drive step Motor driver(DC Bus Voltage: 24-48VDC. Output ... moreCurrent: 1-4.5A) Product Description: The SR series drives are cost-effective. High performance 2 phase step drives. The design is based on PID current control technology, and features high torque, low noise, and low vibration. The running current and microstep resolution are switch selectable. Features: Step direction inputs Optically isolated 5-24V inputs Built-in digital signal filter Microstepping 8 resolutions selectable via switches Other resolutions available upon request Command signal smoothing available upon request Running current 8 current levels selectable via switches Other current levels available upon request Idle current reduction 50% or 90% of running current Enable input Optically isolated 5-24V inputs Disables and enables the drive amplifier Resets drive error and alarm Fault output Optically isolated output for fault indication Self test Motor selection Select from 8 factory loaded motors& low/high inertia Custom motor settings available Electrical Specifications: Current Setting: The output current of the SR4 Step Drive is set by the SW1. SW2, and SW3 switches and can be changed as necessary. There are 8 settings available according to the ON/OFF combination of the switches. Microstep Setting: The microstep resolution is set by the SW5. SW6 and SW7 switches. There are 8 settings. Environmental Specifications: Mechanical Outline: Payment: We accept paypal payment ONLY. Please pay the money within 3 days after the ended time. Import duties. Taxes and charges are not included in the item price or shipping charges. Shipping& Handling: 1. Ship to Canada and Ship to Contiguous United States( excluding Alaska. Hawaii and overseas territories) 2. Delivery time:By Fedex Ground.Generally need about 3-8 business days. 3. Will email you/ or post in Ebay the tracking number once item shipped so you can track your parcet in detail 4. Ship to PayPal
Buy It Now
Free Shipping Condition: Used Location: 龙华区, China Used 1Pcs PK545-NAC-C29 5-Phase Stepping Motor Vexta Plc Module. Three---Tariff policy. Used-- Part of second-hand products will have obvious scratches ... moreon the surface. We will open all the goods and put a red label inside.
Buy It Now
$3.99 Shipping Condition: New Location: China Adaptive motor: Stepper motor. The distance / speed / delay / number of cycles can be saved and set after power down. It can run independently as a module, ... moreor it can be used together with other systems.
Buy It Now
$71.00 Shipping Condition: Used Location: Philippines DC 0.75A 0.72 deg/step. We will then arrange the booking and pick-up service. cut cable and rusted. A:Hmmmnnnn yes. Actual Weight: 0.4Kg. Item Condition: ... moreUsed. Q:ARE THERE ANYTHING MORE?.
Buy It Now
$3.74 Shipping Condition: Neu Location: China Adaptive motor: Stepper motor. The distance / speed / delay / number of cycles can be saved and set after power down. It can run independently as a module, ... moreor it can be used together with other systems.
Buy It Now
Free Shipping Condition: New Location: China 1 X Stepper Motor Driver. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor. ... moreDrive mode: dual-machine constant current PWM drive output.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States Support set duty cycle. Support set frequency. Default display duty cycle. Support reverse connection protection. Soft start function.
Buy It Now
$3.71 Shipping Condition: New Location: China It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. We will not take any such responsibilities. ... moreInput reverse connection protection: Yes.
Buy It Now
Free Shipping Condition: Used Location: China If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item.
Buy It Now
Free Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: Stepper motor driver board with ULN2003. For 12V 5V Stepper motor A. B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface. When used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm Package: 1PCS X ULN2003 Stepper Motor Driver Board Module for Arduino We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually. We ensure dispatch the item within 1-2 business days. However. You bought the item from opposite side of the earth, so it needs a little longer time to deliver. Please place order only if you agree with the shipping time and all the
Buy It Now
$12.00 Shipping Condition: New Location: China 2.8Nm (425oz. 1 x 23HS2430B Stepper Motor 112mm,3A, 425oz-in 2.8N.m ( Dual shaft ). Hot sale-Nema 23 stepper motor 425oz-in dual shaft,3.0A,2 phase CNC ... moreEngraver. Nema23 stepper motor 2.8N.m 425oz-in dual shaft,3 A,2 phase 4 leads CNC Engraver. ).
Buy It Now
Free Shipping Condition: New Location: New York, United States 2pcs DM556 CNC Digital Stepper Motor Driver 2-Phase Stepper Motor Driver 20-50V DC Max 5.6A 128 Subdivision for Nema 23, 24 and Nema 34 Stepper Motor. ... moreDM556 is a New Generation of High Performance Digital Stepping Driver Based On 32-Bit DSP Technology.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver. 8 channels output phase current setting.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Lexington, United States 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino PI PIC Raspberry Pi 💎【28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board】:A, ... moreB, C, D four-phase LED indicates the status of the stepper motor work.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$16.26 Shipping Condition: Used Location: Leander, United States (1) IMS IM804 Step Motor Drive. Model: IM804. High output current (4A RMS, 6A peak). Adjustable automatic current reduction. Microstep resolution may ... morebe changed without loss of position on the fly. There are a few screws a little goobered up but they can still be turned.
Buy It Now
Free Shipping Condition: Used Location: Stockton, United States QUICKPHASE STEPPER MOTOR INDEXR/DRIVER FULL/HALF STEP, 16V, 1.0A. QUICKPHASE S/N: QP133006, QP33905. The QuickPhase-PC is a complete stepper motor indexer ... moreand driver for up to 3 axes. Its space saving design features on board 1 AMP bipolar constant current drivers.
Buy It Now
$10.95 Shipping Condition: New Location: Spring Hill, United States Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. How To Change A Fuse, Or A Drive In A Gecko Drive G540 - YouTube. Here's an overview on the ... moredrive covered from Marcus application engineer at Gecko Drive.
Buy It Now
$46.00 Shipping Condition: New – Open box Location: China There are special circumstances, we will communicate with you. DO NOT send without communication. 2`We will open all the goods and put a label inside. ... moreBecause this is the only proof of our goods.
Buy It Now
Free Shipping Condition: New Location: China .7A and a peak current of 2. Stallguard4TM stall, which can feed back an abnormal when the motor rotates abnormally. The TMC2209 is an ultra-quiet two-phase ... morestepper motor driver chip with a continuous drive current of 1.
Buy It Now
$0.23 Shipping Condition: New Location: China Features: The upgraded version of TB6600 is a driver suitable for 57/42 type two-phase hybrid-stepping motor with phase current under 4.0A. Model: TB6600. ... moreApplication: for 42/57 stepper motor. Set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 3-bit DIP switches, and 8 gear output current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A).
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
$49.99 Shipping Condition: New Location: 龙岗区, China 1. Package Included : 1 x Nema34 12.5NM Closed-loop stepper 1 x Stepper Driver 1 x 3meter Encoder Cable & Power Cable.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Stepper Drive TB6600. In the user expects low cost, high current operation. Stepper Motor. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor. ... moreRosin Heat Press Machine. Digital Readout& Linear Scale.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States A4988 Is a complete microstepping motor driver, With built-in converter, Easy to operate. The product is available in the whole, half, 1/4.1/8 and 1/16. ... moreAs long as it is in" Stepping" Input a pulse in the input, Microstep can drive motor.
Buy It Now
Free Shipping Condition: New Location: United States Part No.: 57BYGH633. 1 PC Nema 23 Stepper Motors with 270oz-in holding torque,57BYGH633, 3A, 6-Leads. 1 PC Stepper Driver with 4.2A DQ542MA digital serial ... morereplacing M542. 1, Stepper Motor. 2, Stepper Motor Driver DQ542MA with 4.2A Current, 128 Microstep.
Buy It Now
$2.99 Shipping Condition: New Location: China Camera& DSLR Studio& Video Camera Bag Home& Garden Solar LED Light Plant Grow Light Massager& Health Sporting Goods Other Features: Material: ... moreAluminum Color: Silver Size: Approx. 8.5 x 8.5 x 5mm/0.34 x 0.34 x 0.20inch The Aluminium Heatsink is specially designed for Raspberry Pi The function of heat sink is to cool down the board and make your Raspberry operate better This 8.5 x 8.5 x 5mm heatsink use with the A4988 drivers Heatsink for A4988 StepStick Stepper Motor Driver Module 3D Printer Reprap RAMPS.Etc. Note: This product has no adhesive Package Included: 1 x Heatsink We accept PayPal only, All major credit cards are accepted through our secure payment processor PayPal. Payment must be received within 7 days of auction closing. If you have bought multiple items from me. You can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review. Items will be shipped within 2 business days upon receipt of your payment. Items shipped from China using Airmail. Reach most of the countries within 10 to 20 business days. Delivery time depends on destination. Shipping method(economy or standard) and other factors, it may takes up to 20 business days. Please make sure your address in eBay is correct. If you want to change your address. Please send us ebay message or email as soon as you make the payment. Combining shipment is not allowed. If you wants to combine all the items together. You should still pay for all of the shipping, insurance and handling fees. If this item is defective upon receipt. Customer has up to 14 days from date of receipt for exchange of a new one or asking for a refund. We offer 1 months warranty start from Recieving purchase. For DOA cases, buyer is responsible for returning postage. We care about our valued customers. And are always willing to work things out. If you have any problems, please e-mail
Buy It Now
$20.74 Shipping Condition: Used Location: San Jose, United States Local pickup in San Jose CA. Box size 10" x 8" x 6".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description With a formidable power and an incredibly strong shaft, this high-tech electric outboard motor serves as an indispensable assistant for your ... moreaquatic endeavors. The brushless pure copper motor and agile steering ensure that you can stealthily catch your prey, embark on outdoor adventures, and navigate the waterways with optimal speed and low noise. Whether you're an angler, boater, or water enthusiast, this motor provides a cutting-edge solution for your needs. Key Features Build to Last: The exquisite painting process and aluminum alloy improve the product's corrosion and abrasion resistance, making it able to withstand salt water environments and serve you for a long time. Strong Power: The pure copper core brushless motor with 1000W 4HP strong power an.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China CNC 4 Axis Kit Stepping Driver TB6600HG Box Set. LCD Display, Keypad 5A More. Description I. About the 3rd Generation TB6600HG Stepper Controller This ... moreTB6600HG Stepper Controller has all the functions of TB6560AHQ Stepper Controller. And is specially developed for stepper motors with higher currents. All the 2 or 4 phase Nema17, Nema23, Nema24 stepper motors with current range of 0.2A~5.0A work perfectly with this TB6600HG Stepper Driver. It has standard version and professional version to meet different user needs. For further information. Please click on the following links. II. Standard Version VS Professional Version. Functions, Standard Version, Professional Version, Intelligent motor control via PC, Manual motor control via control panel, Intelligent switch between PC and control panel, Synchronous coordinates display on PC and display panel, Real-time tracking of motor moving path, Aluminum& high intensity PVC housing protection, Automatic G-code recording, Manual G-code programming, III. Two Unique Functions of Professional Version. Automatic G-code recording function With the embedded intelligent memory chip. This stepper driver can easily record MAXIMUM 4 Axis' X.Y,Z,A Axis) G-code running i n the CNC software(e.g. Mach3. EMC2, KCAM4. Etc. on the computer, after which you can run motors using the recorded G-code without computer. Manual G-code programing function. The upgraded built-in manual control tools(display panel and control panel) can not only be used for manual motor control. But also manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip. After which you can easily run motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc. This package is 4 Axis Professional Version(TB4H-CD-P(Box) If you need the standard version. Please refer to our related item or simply contact us. PCB Instructions& Specifications Display Panel& Control Panel Features High performance. Cost-effective; Manual motor c
|
|
|
 |