|
1 17/64" Dia. DRILL BIT MORSE TAPER #4
Up for Sale 1-17/64" dia. drill#4 morse taper length of cut 8" overall length 14" needs to be s harpened will combine shipping on multiple items if possible
|
|
|
#2MT MORSE TAPER for 1/4" DRILL SPLIT SLEEVE
use on lathe or drill press; 2 mt split sleeve for 1/4" made in Chicago by Scully-Jones USA. ship very fast 24 hrs or less 5-1/2 days USPS
|
|
|
(#3213) Used Machinist No.9 Shell Reamer Arbor with a Morse Taper Shank
Lot 3213 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3213) Used Machinist No.9 Shell Reamer Arbor with a Morse Taper Shank You are bidding on a used. With no manufacturer’s markings on it, No.9 shell arbor, with a Morse taper shank. Its features are: 1-1/4 Arbor size* 13 Inches in overall length* No.4 Morse taper shank* Fits Shell reamers 2-1/6 to 2-1/2 inches in diameter. I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. ... moreshipping Wt 5 LBS. Thank You for Looking!
|
|
|
(#3364) Used Machinist 1-9/16 Inch Morse Taper Shank Expansion Reamer
Lot 3364 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3364) Used Machinist 1-9/16 Inch Morse Taper Shank Expansion Reamer You are bidding on a used. With no manufacturer’s markings on it, Morse taper shank, adjustable expansion reamer. This type of reamer adjusts allowing you to ream both over and under sized holes, and also allows the reamer to be resharpened when it becomes worn, thus saving on tooling cost. Its features are: 1.562 of an inch in diameter* High Speed Steel* 10 straight flutes that are 2 inches in length* 12-1/2 inches in O.V.L. Has No.4 Morse taper shank I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship ... morethis item by priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping Approx. shipping Wt 3-1/2 LBS. Thank You for Looking!
|
|
|
(#3210) Used Machinist No.9 Shell Reamer Arbor with a Morse Taper Shank
Lot 3210 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool& Die shops. 3210) Used Machinist No.9 Shell Reamer Arbor with a Morse Taper Shank You are bidding on a used. Manufactured by Millersburg Reamer& Tool Co. in the USA, No.9 shell arbor, with a Morse taper shank. Its features are: 1-1/4 Arbor size* 13 Inches in overall length* No.4 Morse taper shank* Fits Shell reamers 2-1/6 to 2-1/2 inches in diameter. I will combine shipping when winning more than 1 item please request invoice for combined shipping. Due length and weight of this item I will ship this item by priority mail. I try to ship within 24 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible ... morefor shipping Approx. shipping Wt 5 LBS. Thank You for Looking!
|
|
|
3 HEAVY DUTY MORSE TAPER SLEEVES - VARIOUS SIZES
aims 3 HEAVY DUTY MORSE TAPER SLEEVES- VARIOUS SIZES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 Morse Taper Sleeves in good condition. Sizes in Lot: 4 X 4(2) 5 X 4(1) Overall Length Range: 9-1/2" to 12" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 HEAVY DUTY MORSE TAPER SLEEVES- VARIOUS SIZES Reliable Tool Inc. c 2011 | Powered by
|
|
|
BUTTERFIELD No 8 1" to 2" shell mill reamer mt3 arbor morse taper mill machinest
Some rust and dirt I believe it says 1" to 2" on the srbor and on the reamer 1 3/4.
|
|
|
MACHINIST TOOLS LATHE MILL * JACOBS* #2 DRILL CHUCK Morse Taper
UP FOR AUCTION MACHINIST TOOLS& PARTS JACOBS#2 Drill Chuck Morse Taper* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* PLEASE REFER TO ALL PICTURES TO SEE EXACTLLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS· I will combine shipping for more than one purchase. Please look at our other listings. We have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to ... moreconfirm all costs to buyer.
|
|
|
CENTER with MORSE TAPER MACHINIST LATHE TOOLS MACHINIST TOOLS *H
CENTER with MORSE TAPER MACHINIST LATHE TOOLS Condition/I n fo: Very good condition. I do not know the taper size but here are the measurements: largest dia.70. Small dia.580, distance between the measurements is 3 inches. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas ... moreshipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
|
|
|
CAT 50 MORSE TAPER 3 TOOL HOLDER U
WELCOME TO THE IAR Discount Industrial Equipment& Supplies, | | | | | | | | | | | | PRODUCT DESCRIPTION, IAR Stock# 3534 Condition Used-Excellent. Qty of Lots 1 Items In Lot 1. Location 508. CAT 50 MORSE TAPER 3 TOOL HOLDER U Make: CAT 50. Model: MORSE TAPER 3. SPECIFICATIONS- See Tech Spec tab for more details. Size: 2.31in. Width: 2.25. Type: Holder. Weight(Lbs) 8. Shipping dimensions(L in) 11(W in) 8(H in) 8. Calculated Shipping Tech Spec CAT 50 MORSE TAPER 3 TOOL HOLDER. Compliance Comming Soon. CAT 50 MORSE TAPER 3 TOOL HOLDER U. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e4ccaf0ac-0x101-
|
|
|
USED MORSE TAPER X-LONG EXTENSION SOCKET ADAPTER #2MT-IN & #2MT-OUT (14.50"-OAL)
LISTING IS FOR A MORSE TAPER EXTENSION SOCKET BRAND- UNKNOWN INSIDE TAPER- 2 MORSE TAPER OUTSIDE TAPER- 2 MORSE TAPER OAL- 14.50" CONDITION- GOOD USED SOME SURFACE RUST PITTI NG AND DINGS ON OUTSIDE OF SOCKET Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED ... moreTOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS
|
|
|
NIKKEN BT40 TAPER #2 MORSE TAPER MT BT 40 TOOL HOLDER LOT C2463
SquareTrade © AP6.0 LOT# C2463 ANY QUESTIONS GIVE US A CALL AT 937-672-9876 OR 937-320-2298"FREE SHIPPING IN USA" WE ARE OFFERING A NIKKEN#2 MORSE TAPER HOLDER BT40 TAPER SHANK TOOL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES Be sure to add me to your! 40
|
|
|
NIKKEN BT40 TAPER #2 MORSE TAPER MT BT 40 TOOL HOLDER LOT C2465
SquareTrade © AP6.0 LOT# C2465 ANY QUESTIONS GIVE US A CALL AT 937-672-9876 OR 937-320-2298"FREE SHIPPING IN USA" WE ARE OFFERING A NIKKEN#2 MORSE TAPER HOLDER BT40 TAPER SHANK TOOL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES Be sure to add me to your! 40
|
|
|
FIVE #4 MORSE TAPER DRILL BITS 1-13/64", 1-7/32", 1-15/64", 1-23/64", 1-1/2" USA
LOT OF FIVE#4 MORSE TAPER DRILL BITS 1-13/64" 1-7/32" 1-15/64" 1-23/64" 1-1/2" MADE IN USA SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: $40.95 All Others: $59.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority ... moreMail International Rates are reflected in our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by
|
|
|
3 - 4 MORSE TAPER ADAPTER SLEEVE drill lathe mill mt tool holder CTD USA
good used morse taper adapter sleeve 3- 4 MT CTD USA will ship for $5.80 anywere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1 - 4 MORSE TAPER ADAPTER SLEEVE drill lathe mill mt tool holder COLLIS USA
good used morse taper adapter sleeve 1- 4 MT Collis USA will ship for $5.80 anywere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 - 3 MORSE TAPER ADAPTER SLEEVE drill lathe mill mt tool holder
good used morse taper adapter sleeve 2- 3 MT will ship for $5.80 anywere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 3/4" Drill Bit with # 5 Morse Taper Shank Made by Hercules, High Speed, #A1-6
Hercules Drill Bit 2 3/4" with# 5 Morse Taper Shank. High Speed, A1-6, Total length is approx. 15 3/8" Made in USA, As You see it, Free shipping in USA ONLY. I will take serious offers. others will be considered.
|
|
|
1 1/2" - # 3 Morse taper Adapter for Taper Shank Drills, Nice for CNC Lathe Nice
Heavy duty From 1 1/2" OD- 3 Morse taper Adapter for Taper Shank Drills. Real nice condition. Price is for one. You may however buy both if You wish. Free shipping in USA ONLY. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e522815ac-0xf6-
|
|
|
Dormer 2-3/8" Morse Taper #5 (MT 5) Taper Shank Core Drill Bit
DORMER 2-3/8" MORSE TAPER#5 TAPER SHANK CORE DRILL BIT DIAMETER: 2-3/8" MORSE TAPER#5 LENGTH: 17" LENGTH OF FLUTES: 9-1/2" FLUTES: 3 Drill bit is in"like new" condition and has never been used. See pictures. Similar drill bits sell for nearly $1000.00 on MSC. Please ask any questions prior to bidding. Once payment is cleared. Item will ship within 1 business day. Shipping cost listed is an estimate. Once you have won auction, please wait for the invoice and I will calculate exact shipping cost. I ship via UPS Ground. If you have any special shipping requests, please notify me prior to bidding and I will do my best to accommodate. Thank you for your business! Posted with
|
|
|
VALENITE CAT 50 MORSE TAPER #2 ADAPTER COMES WITH MORSE TAPER #2 EXTENSION (470)
CHECK OUT MY STORE! IF YOU BUY ANY 3 OR MORE ITEMS AT FULL PRICE YOU GET FREE SHIPPING! USED IN GOOD CONDITION I ship 6 days a week. I offer money back quarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interersted. INTERNATINAL SHIPPING PRICE VARIES. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RIDGID SUPREME 23T3 Drill Chuck 0" - 1/2" - No. 2 Morse Taper
RIDGID SUPREME Drill Chuck Model: 23T3 Capacity: 0" 1/2" Shank: No. 2 Morse Taper Visit my Store! 732- 642- 8271 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e5302645d-0x101-
|
|
|
RIDGID SUPREME 6T33 Drill Chuck 0" - 1/2" - No. 3 Morse Taper
RIDGID SUPREME Drill Chuck Model: 6T33 Capacity: 0" 1/2" Shank: No. 3 Morse Taper Visit my Store! 732- 642- 8271
|
|
|
JACOBS Drill Chuck PACK!! 6 Chucks - 3, 6A, Multi Craft Morse Taper 33
JACOBS Drill Chuck Lot of 6 All Chucks are used; Models and sizes are as follows: Model: MC4K61 MC8K64B 3 6A 6A 34-33 Capacity(in. 1/16- 3/8 5/64- 1/2 0- 17/32 0- 1/2 0- 1/2 0- 1/2 Shank: 2 Morse- 11/16" 2 Morse 2 Morse(Chucks with" in the shank row have no shanks) Visit my Store! 732- 642- 8271
|
|
|
# 3 MORSE TAPER CZECH MADE KEY LESS DRILL CHUCK. NICE QUALITY.
Up for bid is an older key less drill chuck in very good shape. Set up for a number 3 Morse taper. Looks like it opens to 5/8" Looks like it has special jaws for real fine work. Flat 10.00 shipping to the lower 48 states.
|
|
|
Jacobs Chuck Arbor No. 2 Morse Taper with No. 2 Jacobs Tapar Albright Germany
Jacobs Chuck Arbor No. 2 Morse Taper with No. 2 Jacobs Tapar Albright Germany Personal machinist tool collection of 75 year old man from Cumberland. Maryland. He worked at the Celanese Corporation and Allegany Instrument Company. His tools/books will be sold in approximately 80 listings over the next week. All auctions will be 10 days, starting at $4.99 and NO Reserve! Please check them all out. This auction is for a machinists keyless chuck with the following inscribed on the shaft and chuck- Jacobs Chuck Arbor No. 2 Morse Taper with No. 2 Jacobs Tapar Albright Germany 0- 5/16" Overall length is 6.5" Used. Wear, staining on shaft, works smooth, very good condition. Please look at all pictures for best description and condition and contact me with any questions through the eBay system. Thanks for stopping by and Godspeed! I accept ... morepayment by PayPal. Please checkout using the eBay system. Cash is fine on items picked up. Any problems at all email me through the eBay system. Shipping Costs are OUT OF CONTROL and out of my control. If cost looks high. Please make sure you look at shipping details for other options. Also, make sure you enter your correct zip code into the shipping calculator. For shippable items I will offer USPS Priority, First Class, Parcel Post, Media, and UPS Ground. Some items will be"Standard" shipping and I will choose one of the methods based on the size and weight of the item and your location(I am on the east coast, about 3,000 miles from the west coast) As of January 1, 2013 I have shipped 6,000+ packages worldwide. I do not and have never over-charged for shipping. If the costs does not look right, email me with your zip code and I will check it out. My classes on s/h cost for eBay Sellers is FREE! I almost always ship the next day of cleared payment. Not when you bought it. Non-shippable items will be listed as"Local Pick Up Only" and it will be Buyer's responsibility to make these arrangements. I will work with the Buyer as best I can for local pick up
|
|
|
JACOBS No. 34 Drill Chuck 0" - 1/2" - 3 Morse Taper
JACOBS Drill Chuck Model: No. 34 Capacity: 0" 1/2" Shank: No. 3 Morse Taper Visit my Store! 732- 642- 8271
|
|
|
ALBRECHT No 1-13 Drill Chuck 1/32" - 1/2" - No 2 Morse Taper GERMAN
ALBRECHT Drill Chuck Model: 1-13 Capacity: 1/32" 1/2" Shank: No. 2 Morse Taper Visit my Store! 732- 642- 8271
|
|
|
Jacobs Morse Taper #2 MT2 x Jacobs #2 Drill Chuck Arbor A0202
Welcome! Up for sale is a Jacobs Morse Taper#2 MT2 x Jacobs#2 Drill Chuck Arbor A0202. Used in good condition. Feel free to email any questions! SCT1617b
|
|
|
Jacobs #20 Drill Chuck 1" Capacity Morse Taper #4 MT4 Shank
Welcome! Up for sale is a Jacobs#20 Drill Chuck 1" Capacity Morse Taper#4 MT4 Shank. Used in good condition. Does not include chuck key. Feel free to email any questions! SCT1619
|
|
|
#2 MORSE TAPER REAMER, USA MADE BY C & I, USED TWICE
NICE MORSE TAPER#2 HAND REAMER. MARKINGS: C& I 551. B10-00, USA. DRIVE END SQUARE.465" 6" OAL HSS. THANKS FOR LOOKING. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e534f539a-0x101-
|
|
|
Shell Reamer Arbor Morse Taper #4 MT4 1-1/4" Dia
Welcome! Up for sale is a Shell Reamer Arbor Morse Taper#4 MT4 1-1/4" Dia. Takes shell arbors with a 1-1/4" hole. No maker's marks. Feel free to ask any questions! GLM136b
|
|
|
NO.4 MORSE TAPER SHANK ADAPTER FOR TREE UNIVERSAL TAPER BORING HEAD
Tree Universal Taper Boring Head Adapter No.4 Morse Taper Shank Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, or PayPal accepted. $9.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
MARVECO C HD Ball bearing lathe center #5 Morse Taper Heavy Duty USA
MARVECO C HD Heavy Duty Ball bearing Lathe center. 5 Morse Taper. This is used. And has some dings, and dents, but overall good condition, spins good. Has a few light ware rings on cone, looks worse than they feel. Email with questions, and check out my other auctions.
|
|
|
WARNER & SWASEY M-950 NO.4 MORSE TAPER ADAPTER SLEEVE 1-3/4" SHANK
WARNER& SWASEY NO.4 MT ADAPTER SLEEVE PART NO. M-950 1-3/4" DIAMETER SHANK Very good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
Large adjustable reamer 2.187" morse taper #5
This is a nice adjustable reamer it is a size 2.187 and it has a#5 morse taper shank. it is in good condition. Ready to go to work. Please look at the pics. please ask questins Posted with
|
|
|
Morse taper drills 15 pcs
Up for bid is a lot of 15pcs morse taper drill. They are very good used. And ready to make chips. Made in USA! Morse taper#3: 13/16(2) 59/64(2) 27/32(2) 49/64, 57/64, 31/32, 59/64( flat nose) Morse taper#2: 51/64. 25/32, 22.25mm, 23mm, 27/32(3 flutes core drill) Bid with confident guys. Look at my feed back on drills that i sold to my customers. They are all happy with them. International bidders are welcomed but you have to pay custom fee and different shipping charge! Thanks for bidding! Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e53b4975f-0x104-
|
|
|
Morse taper drills 20 pcs
Up for bid is a lot of 20pcs morse taper drill. They are very good used. And ready to make chips. Made in USA! Morse taper#3: 13/16(3) 27/32(2) 57/64, 7/8, 15/16(4 flutes core drill) 29/32(flat nose) Morse taper#2: 59/64(3) 13/16(2) 25/32(2) 19.5mm(2) 7/8, 25/32. Bid with confident guys. Look at my feed back on drills that i sold to my customers. They are all happy with them. International bidders are welcomed but you have to pay custom fee and different shipping charge! Thanks for bidding! Posted with
|
|
|
Morse Taper Drill Bit Set - Lot of 14 - MT2 - Made by Morse Cutting Tool USA
This is a lot of 14- Morse#2 Taper Drills. Bits will have some wear. And maybe a few chips. Most of them are somewhat sharp, but may need to be sharpened to your own specifications. Made by Morse Cutting Tool USA. Sizes: 3/4- dull 23/32 47/64 45/64 43/64 11/16 39/64 19/32 5/8- dull 37/64 17/32- dull 35/64 33/64 17/32- dull Actual items for sale is pictured. Combined shipping is available. Just request invoice before paying. If you are not happy with this item. Then return it for a refund with 14 days(buyer pays shipping both ways)
|
|
|
MORSE BRAND TAPER EXTENSION SOCKET #2 TO #4 MADE IN USA
UP FOR SALE IS THIS MORSE BRAND TAPER EXTENSION SOCKET#2 TO#4 MADE IN USA. THIS IS A USED MORSE BRAND TAPER EXTENSION SOCKET#2 TO#4. OVERALL LENGTH IS 8-9/16" MADE IN U.S.A. IN GOOD USEABLE CONDITION. NEEDS CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK! NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ALASKA. HAWAII. CANADA OR ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. 2925
|
|
|
(4) KWIK SWITCH 300 MORSE TAPER TOOL HOLDERS (2)PCS #1 MT (2)PCS #2 MT LOT C1907
LOT C 1907 WE ARE OFFERING A(4) PIECE SET OF KWIK SWITCH 300 MORSE TAPER TOOL HOLDERS. YOU WILL GET(2) 1 MT HOLDERS& 2) 2 MT HOLDERS YOU WILL RECEIVE AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13e53ee5a3e-0xfd-
|
|
|
READY TOOL LATHE LIVE CENTER MT # 5 MORSE TAPER LOGAN SOUTH BEND MONARCH ENCO
LOTS OF AUCTIONS ONLINE NOW! Brand Ready Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Used Royal Live Center With No.2 Morse Taper Changeable tip and Original box
Lightly Used Royal Live Center With No.2 Morse Taper# 10002 Changeable point and original box. 6 Inch overall length# 2 Morse Taper This will ship USPS Prioritiy flat rate at $5.35. NO RESERVE
|
|
|
Vintage Scully Jones & Company No. 74100 Lathe Live Center 2 Morse Taper
Vintage Lathe Live Center Scully Jones& Company No. 74100 Stamped: Scully Jones Live Center 2 Morse Taper Part No. 74100 Scully Jones& Co. Chicago. Ill. A nice addition for any lathe owner and/or collector. Buyer to pay $7.99 shipping. Thanks for looking and good luck!
|
|
|
APEX NO.5 MORSE TAPER LONG NOSE LIVE CENTER #5MT
APEX LIVE CENTER NO. 5 MORSE TAPER SHANK Good used condition. Actual item pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $ 11.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
PDQ QUICK CHANGE NO.3 MORSE TAPER ADAPTER #3MT M SERIES
PDQ NO.3 MORSE TAPER ADAPTER M SERIES SHANK Good used condition. As pictured. Payment due within ten days after auctions ends. Check. M/o, or PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. We gladly combine shipping on multiple items purchased* STOCK NO. PDQM-107 Thanks for looking!
|
|
|
2-3 MORSE TAPER SLEEVE SOCKET 4-1/2" LONG #9790
Description: 2-3 MORSE TAPER SLEEVE SOCKET 4-1/2" LONG USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted if item is not as described in our ad. We must be notified within 14 days of receiving ... moreitem. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or co
|
|
|
Supreme Drill Chuck w/ no. 2 Morse Taper Shank, 3/8 Capacity, VG Cond
Supreme Drill Chuck w/ no. 2 Morse Taper Shank. 3/8 Capacity, VG cond. Replacement cost about $125. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 10.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
JACOBS CHUCK 34B WITH MORSE TAPER #2
JACOBS CHUCK 34B WITH MORSE TAPER#2. GOOD SHAPE, NO CHUCK KEY INCLUDED. I ACCEPT MOST FORMS OF PAYMENT. I COMBINE SHIPPING WHEN POSSIBLE LOCAL PICK UP IS WELCOME.
|
|
|
FLYNN 4-1/2" BORING HEAD MODEL 47 ON #4 MORSE TAPER SHANK
ONE USED FLYNN 4-1/2" BORING HEAD MODEL 47 ON#4 MORSE TAPER SHANK HOLDS 1" BORING BARS SHIPPING $12.49 ALL 50 STATES INTERNATIONAL SHIPPING BASED ON LOCATION: Canada/Mexico: $40.95 All Others: $59.95 NOTES ABOUT SHIPPING: International Buyers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Recent increases in USPS Priority Mail International ... moreRates are reflected in our shipping charges. All Buyers: We strive to make shipping affordable and quick. The USPS's Flat Rate Box and Flat Rate Envelope provide quick delivery at a reasonable cost to ship the majority of our items. Our shipping charges are based on the actual shipping costs plus a small handling charge. We believe these rates are very reasonable. Especially since we combine shipping at no additional charge where additional auctions/items will fit in the same flat rate package. If you have questions about our shipping charges or combining shipping, please email us before you bid. LOOK AT MY OTHER AUCTIONS; I WILL COMBINE SHIPPING Payment arrangements must be made within three days of end of auction. Visit my eBay Store: THANK YOU from Firemade_Tools Powered by 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e54664a1e-0x101-
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #2 MORSE TAPER MT LOT C1795
SquareTrade © AP6.0 LOT C1795 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#2 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list!
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #4 MORSE TAPER MT LOT C1813
SquareTrade © AP6.0 LOT C1813 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#4 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list! On Apr-07-13 at 14:25:53 PDT. Seller added the following information:
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #3 MORSE TAPER MT LOT C1810
SquareTrade © AP6.0 LOT C1810 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#3 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list! 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e54754008-0xf4-
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #4 MORSE TAPER MT LOT C1930
SquareTrade © AP6.0 LOT C1930 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#4 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list! `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e54754229-0xfb-
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #2 MORSE TAPER MT LOT C1793
SquareTrade © AP6.0 LOT C1793 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#2 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list!
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #2 MORSE TAPER MT LOT C1858
SquareTrade © AP6.0 LOT C1858 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#2 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list!
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #2 MORSE TAPER MT LOT C1859
SquareTrade © AP6.0 LOT C1859 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#2 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list! On Apr-28-13 at 14:19:52 PDT. Seller added the following information:
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #2 MORSE TAPER MT LOT C1792
SquareTrade © AP6.0 LOT C1792 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#2 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list!
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #2 MORSE TAPER MT LOT C1796
SquareTrade © AP6.0 LOT C1796 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#2 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list! On Apr-28-13 at 14:19:53 PDT. Seller added the following information:
|
|
|
CINCINNATI SERIES C TOOL MASTER AND MONOSET COLLET #4 MORSE TAPER MT LOT C1931
SquareTrade © AP6.0 LOT C1931 CINCINNATI TOOL MASTER SERIES C MONOSET COLLET#4 MT MORSE TAPER YOU WILL RECEIVE ACTUAL ITEM SHOWN IN PICTURE THIS IS NOT A STOCK PHOTO WE HAVE MORE COLLETS LISTED AND WILL BE LISTING MANY MORE ANY QUESTIONS CALL 937-672-9876 Check out my other items! Add me to your favorites list! o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e547542a9-0xf4-
|
|
|
1-1/4" HS COOLANT FED DRILL #4 MORSE TAPER USED
1-1/4" HIGH SPEED COOLANT FED DRILL USED T HESE ARE HIGH QUALITY DRILLS THEY WERE OBTAINED FROM A CLOSED GM PLANT IN FLINT. MI#4 MORSE TAPER SHANK 1-1/4" TOTAL LENGHT IS APX. 13-7/8" THIS ITEM HAS BEEN STORED FOR APX. 10 YEARS PLEASE SEE PHOTOS FOR CONDITION OF THIS DRILL THANKS FOR LOOKING AISLE X#162
|
|
|
VINTAGE 47/64" DRILL BIT / TWIST DRILL / MORSE TAPER 2
47/64" MORSE TAPER 2 DRILL GOOD CONDITION. MAY NEED SHARPENING.
|
|
|
VINTAGE 51/64" DRILL BIT / TWIST DRILL / MORSE TAPER 3
51/64" MORSE TAPER 3 DRILL GOOD CONDITION. MAY NEED SHARPENING.
|
|
|
VINTAGE 45/64" DRILL BIT / TWIST DRILL / MORSE TAPER 2
45/64" MORSE TAPER 2 DRILL GOOD CONDITION. MAY NEED SHARPENING.
|
|
|
VINTAGE 19/32" DRILL BIT / TWIST DRILL / MORSE TAPER 2
19/32 MORSE TAPER 2 DRILL GOOD CONDITION. MAY NEED SHARPENING.
|
|
|
VINTAGE 51/64" DRILL BIT / TWIST DRILL / MORSE TAPER 2
51/64" MORSE TAPER 2 DRILL GOOD CONDITION. MAY NEED SHARPENING.
|
|
|
VINTAGE 13/16" DRILL BIT / TWIST DRILL / MORSE TAPER 2
13/16" MORSE TAPER 2 DRILL GOOD CONDITION. MAY NEED SHARPENING.
|
|
|
3 - 5 Morse Taper Extension Adapter drill holder CLEVELAND
Cleveland 3 to 5 morse taper extension adapter. Shipping is free to lower 48.
|
|
|
Tapered DRILL BIT MORSE TAPER #4
Up for Sale Custom Tapred/ Stepped drill bit#4 morse taper length of cut 5" overall length 11" needs to be s harpened will combine shipping on multiple items if possible
|
|
|
MACHINE REAMER 0.6935 SOUTHERN TOOL #2 MORSE TAPER SHANK RH CUT #7680
DESCRIPTION: MACHINE REAMER 0.6935 SOUTHERN TOOL RIGHT HAND CUT#2 MORSE TAPER SHANK ABOUT 8 1/2" LONG USED BUT APPEARS TO BE IN GOOD SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. ... moreThe item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cros
|
|
|
1.25" Dia. END MILL MORSE TAPER #3 loc 2"
Up for Sale 1.25" dia. loc 2"end mill#3 morse taper needs to be s harpened will combine shipping on multiple items
|
|
|
2 #3 Morse Taper Endmills1 high speed steel 1 carbide tip good used condition
Up for sale are two spiral endmill with Morse# 3 taper.made by one is made by union twist drill the other is carbide tipped and i cannot read the maker comes as shown in good used condition. buyer to pay 7.00 for USPS small flat rate box any questions just ask thanks! 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13e5745deaa-0xfe-
|
|
|
#2 MORSE TAPER 3/8" DRILL DRIVER #7482
DESCRIPTION: 2 MORSE TAPER DRILL DRIVER 3/8" USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we do have experience in the tooling industry. We don't know everything. If a mistake is ever made on one of our listings, it is purely unintentional and no fraud or misrepresentation is intended. 1: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1 business day. Shipping charges are the responsibility of the buyer unless otherwise stated in the ad. 3: We do offer a money back refund. The item must be received back in its original condition and we must be ... morenotified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 4: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. We cannot test certain items at our location. 5: When we say it is NEW; It will be never used or old stock. 6 Concerning calibration of items; no items are calibrated unless otherwise noted. 7: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
#2 MORSE TAPER 11/64 DRILL DRIVER SCULLY-JONES #7435
DESCRIPTION: 2 MORSE TAPER 11/64 DRILL DRIVER SCULLY-JONES USED BUT APPEARS TO BE IN GREAT SHAPE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we do have experience in the tooling industry. We don't know everything. If a mistake is ever made on one of our listings, it is purely unintentional and no fraud or misrepresentation is intended. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1 business day. Shipping charges are the responsibility of the buyer unless otherwise stated in the ad. 3: We Do Not End Auctions Early. 4: We ... moredo offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. We are unable to test some items at our facility. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cr
|
|
|
HIGH SPEED NATIONAL DETROIT DRILL SET 13/16 to 1" #3 MORSE TAPER DRILL BIT SET
Set of used. National detroit bits and one union twist high speed bits. 57/64. 51/64. 53/64. 13/16. 27/32. 31/32. 63/64 UNION TWIST. 1" 15/16. 29/32. 61/64. 59/64.
|
|
|
Pratt & Whitney Jig Bore Bore Morse Taper #1 MT Collet
Overall Length 2.913" Morse Taper#1 Inside Taper Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
2-1/2" Morse Taper 5 shank FLAT BOTTOM cutting bottoming cut drill bit mt5 5mt
Item. Morse Taper Shank Bottoming twist Drill Bit Manufacturer. Unknown Diameter. 2-1/2" Shank Size. Morse Taper#5 Overall Length. 14" Flute Length. Will pull chips out thru 6" Type. 2 Flute hs hss high speed steel We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is ... morenot the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
L65- Huge Lot 11pcs Morse Taper Drill Bits end mills milling - NO RESERVE
Lot 65 11pcs Taper Drill Bit Lot Some of the sizes that you will receive are 1. 1 1/2in 2. 1 11/32in 3. 1 13/32in 4. 1 7/16in 5. 1in 6. 17/32 7. 13/16 8. 9/16 Shipping is only $20 Please Check out our other Great Ebay Deals on Tooling- HUGE TOOLING SALE
|
|
|
L60- Lot of 2 taper shank Morse drill bits 1 27/32" & 1 11/16in end mill cutter
Lot 60 Lot of 2 Taper Shank Drill Bits 1. MORSE- 1 27/32 in 2. RED SHIELD- 1 11/16 in Shipping is only $20 Please Check out our other Great Ebay Deals on Tooling- HUGE TOOLING SALE
|
|
|
JACOBS BALL BEARING SUPER CHUCK MODEL 14N 0-1/2 in morse taper #4
Up for sale JACOBS BALL BEARING SUPER CHUCK MODEL 14N 0-1/2 in morse taper#4 condtion used in good working order will combine shipping on multiple orders if possible
|
|
|
1-41/64" Drill Bit Morse Taper Shank 5 USA CORE 5mt mt5 4 Flute Cutter Tool USA
Just a quick note if you are not familiar with core drills. The tip does not come to a point like it does on standard 2 flute drills, core drills typically have 3 or 4 flutes, you will need to drill a pilot hole first before you use this drill. Item. Morse Taper Shank Twist Drill Bit Manufacturer. Latrobe Tool Made in the US America Diameter. 1.640" Shank Size. Morse spindle Taper#5 Overall Length. 17-1/2" Flute Length. 9-1/2" Type. 4 Flute Core Drill hs hss high speed steel Condition. Nice sharp used. The tip is actually still partially coated in plastic, so it is a resharp and ready to drill immediately This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee ... moreif you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the
|
|
|
3 (three), 1 3/16", 63/64" & 29/32", #3 Morse TAPER SHANK TWIST DRILL BITS
You are bidding for 3(three) 1 3/16" 63/64" 29/ 32" HSS, TWIST DRILL BITS made in the USA. with#3 MORSE Taper Shank. They are in GOOD CONDITION. ONE, 1 3/16" MORSE HS, 3 Morse Taper. 3 1/4" Flute length. 9" Total length. ONE, 63/64" NATIONAL HS#3 Morse Taper. 3 1/4" Flute length& 9 1/4" Tota l length. ONE. 29/32" HERCULES HS. 3 Morse Taper. 3" flute length& 9" Total length. We can sell each separately. For more info call ALBERT at 732-687-0030.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e5b3c4e97-0xf9-
|
|
|
NMTB 40 - 4 MORSE TAPER DRILL HOLDER mill milling machine tool DEVLIEG 40ME-4M
good used nmtb 40- 4 morse taper drill holder Q/C flange DEVLIEG USA 40ME-4M FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 - 3 MORSE TAPER DRILL HOLDER mill milling machine tool DEVLIEG 40M-3M
good used nmtb 40- 3 morse taper drill holder DEVLIEG USA 40M-3M FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e5b9df4d3-0x102-
|
|
|
USED EXTRA-LONG MORSE TAPER EXTENSION SOCKET ADAPTER #4 to #4MT 13.75"oal
LISTING IS FOR AN EXTRA LONG MORSE TAPER EXTENSION SOCKET ADAPTER BRAND- PART# INSIDE TAPER- 4MT OUTSIDE TAPER- 4MT OAL- 13. 75" CONDITION- WELL USED MANY NICKS AND DINGS Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, ... moreVISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHE
|
|
|
HEAVY USED EXTRA LONG MORSE TAPER EXTENSION SOCKET #2MT TO #4MT MTA ADAPTER
LISTING IS FOR A USED MORSE TAPER EXTENSION SOCKET BRAND- OUTSIDE TAPER- 4MT INSIDE TAPER- 2MT OAL- 16.25" CONDITION- HEAVY USED MANY NICKS& DINGS Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN ... moreEXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE
|
|
|
1-1/32 Drill bit Morse Taper Shank #3 FLAT Bottom Cutting Bottoming cut mt3 3mt
Item. EXTRA LENGTH Morse Taper Shank Flat Bottoming Drill Bit Manufacturer. ATD USA Made in the US America Diameter. 1.031" Shank Size. Morse Taper#3mt Overall Length. 16-3/4" Flute Length. 11-3/4" Type. HSS 4 Flute CORE Bottom cutting but not center cutting high speed steel Condition. Very sharp. Might be new old stock, maybe used one time? This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return ... moreshipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too mu
|
|
|
1-49/64" High Speed 10" long Drill Bit #4 Morse Taper 4MT Twist Shank 16" OAL
1-49/64" Diameter Made in New Bedfor d. MA High Speed 10" Spiral Twist Shank#4 Morse Taper 4MT 16" Ove r All Length Others at $125+ Here $19.99 starting bid& NO R e serve Buyer to pay actual UPS shipping. Good Luck.
|
|
|
11/32" Drill bit Morse Taper 2 Shank Extra Length 12" MT2 2MT 7" Long Flute 15"
Item. Extra Length deep pocket Drill Bit Manufacturer. Morse Twist Drill Co. USA Made in the US America Diameter. 11/32" Shank Size. Morse Taper#2 mt2 2mt Overall Length. 15-5/8" Flute Length. 7" But you can Plunge to 12-1/4" if needed Type. 2 Flute hs hss high speed steel Condition. Super sharp. Pretty much like New yet, maybe used one time. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined ... moreshipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
CAT50 #3 MT MORSE TAPER HOLDER GREAT COND CAT 50 LOT C2472
SquareTrade © AP6.0 LOT# C2472 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT50#3 MORSE TAPER HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
CAT50 #3 MT MORSE TAPER HOLDER GREAT COND CAT 50 LOT C2474
SquareTrade © AP6.0 LOT# C2474 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT50#3 MORSE TAPER HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
KENNAMETAL CAT50 #3 MT MORSE TAPER HOLDER GREAT COND CAT 50 LOT C2476
SquareTrade © AP6.0 LOT# C2476 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A KENNAMETAL MADE IN USA CAT50#3 MORSE TAPER HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
KENNAMETAL CAT50 #2 MT MORSE TAPER HOLDER GREAT COND CAT 50 LOT C2485
SquareTrade © AP6.0 LOT# C2485 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A KENNAMETAL MADE IN USA CAT50#2 MORSE TAPER HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|