|
SECO PerfoMAX 1" Indexable Drill Coolant Fed (SD502-1000-200-1250R7)
SECO PerfoMAX Indexable Drill(SD502-1000-200-1250R7) Drill Diameter: 1.000" Shank Diameter: 1.250" Drilling Depth: 2.000" Shank Length: 2.375" Overall Length: 5.556" Direction: Right Hand Coolant Fed: Yes Inserts Required: 2 Center Insert: SPGX 0703-C1 Peripheral Insert: SCGX 070308. This drill is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
UTD-USA-1 11/32" #4 M/T COOLANT MACHINIST DRILL BIT-HS-13.0" OAL. 8.0" LOC. USED
UTD-USA- DRILL BIT- 4 M/T. COOLANT-HS-13.0 OAL, 8" LOC. IN GOOD CONDITION, AS SHOWN IN PICTURES, USA ONLY
|
|
|
TRW-USA- 1 13/16" -MACHINIST DRILL BIT-COOLANT-5 M/T, 19"OAL.HS
TRW-USA- 1 13/16" 5 M/T- DRILL BIT- 19" OAL. COOLANT-HS- IN GOOD CONDITION, AS SHOWN IN PICTURES, USA ONLY.
|
|
|
1 9/16" -MACHINIST DRILL BIT REPUBLIC-USA- 5 M/T, 17"OAL. COOLANT- USED
REPUBLIC-USA- 1 9/16" DRILL BIT- COOLANT- 5 M/T- 17" OAL. IN VERY GOOD CONDITION. AS SHOWN IN PICTURES, USA ONLY. 6 LBS.
|
|
|
2 1/8" LARGE -MACHINIST DRILL BIT-FB TOOLS,ENGLAND-COOLANT-SPEEDICUT-17 OAL.USED
2 1/8" MACHINIST DRILL BIT- FB TOOLS, ENGLAND, SPEEDICUT- 17 OAL, 5 M/T, 8 LBS. IN GOOD CONDITION, AS SHOWN IN PICTURES, USA ONLY
|
|
|
GRAY MILLS MACHINE TOOL COOLANT UNIT 120V FITS LATHE MILL BANDSAW DRILL PRESS
Sale is for(1) One Gray Mills Coolant Unit This is a nice clean unit a little dirt in the tank and the paint has flaked off in a few spots The pump makes a bunch of flow on this This has been tested and works as it should The one shown in the photos is the one you receive More Photo's Below Spec's; Mfg- Gray Mills Fitting's 3/4" npt Size-9-3/4" x 25" Height-11-1/2" Voltage-120 volt Hp-1/4 Phase-Single Weight- 59 Lbs Location- E-5-2 Thanks Kurt
|
|
|
NICE!! GUHRING PRECISION 13/32" SOLID CARBIDE COOLANT-FED DRILL
aims NICE! GUHRING PRECISION 13/32" SOLID CARBIDE COOLANT-FED DRILL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Solid Carbide Drill in Great Condition. Specifications: Diameter: 13/32" Shank: 15/32" Lengths of Cut: 2-1/2" Overall Lengths: 4-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! GUHRING PRECISION 13/32" SOLID CARBIDE COOLANT-FED DRILL Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1435639d5b5-0xe8-
|
|
|
Sandvik Coolant Indexable Drill 880-D2500L25-02 suitable for 880. Carbide Insert
You are purchasing Sandvik Coolant Indexable Drill 880-D2500L25-02 suitable for 880. Carbide Insert D1-MM 25 Drill Depth Ratio: 2xD Insert Compatibility:880. USED BUT HOW IN THE IMAGE TO SEE LIKE NEW Please confirm your mailing address with payment. Otherwise I will mail your item to your address in E-bay registration and it’s your responsibility to be correct, not mine. PAYMENT We ship promptly within 24 hrs after receiving your payment. Returns If You are unsatisfied for any reason please contact us to discuss possible solutions or arrange a return of your item. We strive to maintain 100% customer satisfaction. Contact If you need detailed information about our stock items or if you have any questions or comments regarding your purchase. Please contact us at: info@wendeplatten-eu.com Information about our stock items or if you have any ... morequestions or comments regarding your purchase. Please contact us at: info@wendeplatten-eu.com
|
|
|
NICE 1-1/2" DIA 4" FLUTE LENGTH # 4 MT SHANK COOLANT THRU INSERT DRILL LOT C6261
LOT C6261 FREE SHIPPING IN USA WE ARE OFFERING A COOLANT THRU INSERT DRILL 1-1/2" DIA W/ 4 MT SHANK 4" FLUTE LENGTH YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR! On Jan-01-14 at 14:20:48 PST. Seller added the following information:
|
|
|
1-1/2" DIA 3-1/2" FLUTE LENGTH # 5 MT SHANK COOLANT THRU INSERT DRILL LOT C6262
LOT C6262 FREE SHIPPING IN USA WE ARE OFFERING A COOLANT THRU INSERT DRILL 1-1/2" DIA W/ 5 MT SHANK 3-1/2" FLUTE LENGTH YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR! On Jan-05-14 at 14:19:20 PST. Seller added the following information:
|
|
|
Whalley 9/16 Coolant Fed Taper Shank Drill Bit
Whalley 17/32 Coolant Fed Taper Shank Drill Bit in used condition and sold as is. Shows some sign of cosmetic wear. Posted with
|
|
|
13.5mm Dia Coolant Thru Nitride Drill 6" Long Dormer
13.5mm Dia Coolant Thru Nitride Drill 6" Long Dormer ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#5036-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14369412ee3-0xfe-
|
|
|
9/16" Dia Coolant Thru Solid Carbide Drill
9/16" Dia Coolant Thru Solid Carbide Drill ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#5035-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
13/32" x 6" HSS Coolant Thru Drill USA
13/32" x 6" HSS Coolant Thru Drill USA ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#5031-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
20mm Dia x 8" Long Coolant Thru HSS Drill USA
20mm Dia x 8" Long Coolant Thru HSS Drill USA ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#5029-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
53/64 Dia x 11" Long Thru Coolant HS Clevland Twist Drill
53/64 Dia x 11" Long Thru Coolant HS Clevland Twist Drill ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#5020-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Erickson Kennametal "B" Series Spade Drill Holder 1-1/4" to 1-3/4" Coolant Fed
Erickson/ Kennametal"B" Series Spade Drill Holder(3-76-054-211) Drill Insert Range: 1-1/4" to 1-3/4" Shank Diameter: 1-1/2" Flute Length: 8" Overall Length: 12" Coolant Fed: Yes Type: Straight Shank and Flute This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Waukesha "C" Series Spade Drill Holder 1-1/2" to 2-3/8" Coolant Fed (2040-0200)
Waukesha"C" Series Spade Drill Holder(2040-0200) Drill Insert Range: 1-1/2" to 2-3/8" Shank Diameter: 1-1/4" Flute Length: 3-1/4" Overall Length: 6-3/4" Coolant Fed: Yes Type: Straight Shank and Flute Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
RESHARPENED GUHRING TiN COATED 17.00mm STRAIGHT SHANK COOLANT DRILL .6693"
LISTING IS FOR A RESHARPENED STRAIGHT SHANK TWIST DRILL BRAND- GUHRING PART# 2036-3682-C SIZE- 17.00mm(6693" FLUTE LENGTH- 4.750" OAL- 9.00" TiN COATED CONDITION- VERY GOOD USED DRILL HAS BEEN RESHARPENED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF ... moreAUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUE
|
|
|
USED WALTER WAUKESHA INSERT COOLANT DRILL 1-15/16" 8410-0160-F (1.75"-Shank)
LISTING IS FOR A USED WALTER WAUKESHA INSERT DRILL BRAND- WALTER WAUKESHA PART# 8410-0160-F DIAMETER- 1.937" FLUTE LENGTH- 4.00" OAL- 8.625" SHANK- 1.75" USES INSERTS- SIZE"2.5" NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS ... moreDAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY
|
|
|
Ingersoll thru Coolant Carbide Insert Drill 1 1/16" dia 0027008lN6R01
Ingersoll thru Coolant Carbide Insert Drill 1 1/16" dia 0027008lN6R01 ALL ITEMS ARE SOLD AS IS. WHERE IS stock#4921-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Carbide Insert thru Coolant Drill 1 3/8" id x 4" M270-0143
Carbide Insert thru Coolant Drill 1 3/8" id x 4" M270-0143 ALL ITEMS ARE SOLD AS IS. WHERE IS stock#4920-C THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
Drill Bit 3/8 x 8 5/8 3438 HS USA TL#36Z... 1060480101 Long Coolant Thru
High Speed Coolant. Oil Drill Bit 3/8 x 8 5/8 3438 HS USA TL#36Z. 1060480101 Long Coolant Thru Through 2 holes top to bottom Thank you for looking! Questions are welcome!
|
|
|
Drill Bit 3/8 x 7 7/8 3438 HS USA 511580-1 36zo Coolant Thru
High Speed Coolant. Oil Drill Bit Drill Bit 3/8 x 7 7/8 3438 HS USA 511580-1 36zo Coolant Thru There are some numbers that are hard to read. 2 holes top to bottom Thank you for looking! Questions are welcome!
|
|
|
2 1/2" - MACHINIST DRILL BIT- F,B,TOOLS- SPEEDICUT- COOLANT -19.0 OAL-HS-USED
2 1/2" DRILL BIT- F.B. TOOLS- ENGLAND- SPEEDICUT- COOLANT- 5 M/T- 19.0 OAL. 14 LBS. IN GOOD CONDITION. AS SHOWN IN PICTURES, USA ONLY.
|
|
|
392 X 4 15/16 SOLID CARBIDE DRILL COOLANT HOLES REGRIND SPADE
CARBIDE COOLANT DRILL Here is a KENNAMETAL.392" x 4 15/16" SOLID CARBIDE DRILL WITH 2 OIL COOLANT THRU HOLES. I believe it has been reground from a longer length. The width of the drill might be worn. I don't believe it was used after it was reground. This type of drill is commonly referred to as a spade a"G" or a"DB" drill. The usable flute area is about 2 1/2" and the shank is about.3934. Item Photos, Please check my other auctions if you are interested in unusual items or books because I am continually adding new items. I will gladly combine shipping. Be sure to add me to your favorites list! Summary of My Selling Policies Payment 1) We accept payment by Paypal 2) Payment is due within 10 days of the end of auction. If payment is not received non-paying bidder alert will be issued. Shipping 1) We ... moreship mostly in the US due to the new policies. The shipping. Handling and insurance fees are fixed and stated in the auction 2) Shipping on this item is calculated at the FIRST CLASS MAIL rate. 3) Shipping discounts offered for multiple purchases shipped to the same address. 4) Insurance is always available. Please email me for cost. Delivery 1) Items are usually shipped as soon as payment is received. 2) We ship Monday thru Saturday. Refunds& Returns 1) ALL of our auctions are Guaranteed. In the unlikely event we mistakenly misrepresented an item. We offer a Full Refund of the Bid Price. Just email us within FOUR days of delivery. Bidders are still responsible for ALL shipping, handling and insurance costs, including ALL return shipping costs. 2) Please understand that all information pertaining to age. Condition, origin, etc. are approximations. Unless specified, all items are used, second-hand, or antique. We do not sell on approval. If you are unsure of any information provided or require additional information, please email us Prior to Bidding. 3) Please inform us before returning an item. Item will not be accepted without prior notification AND approval via e-mail. 4) I
|
|
|
7/16" (11.1mm) Solid Carbide Drill 6 3/8" Long Through Coolant .4375 437
11.1mm(7/16" SOLID CARBIDE DRILL For sale I have an 11.1mm(7/16" Solid Carbide Through Coolant Drill. 11.1mm is.4370 and 7/16" is.4375. So it is basically a 7/16" drill(0005 undersize) It is approx. 6 3/8" long with approx. 4 3/8" of flute. I am listing this as used. But there are no chips in the corners or on the cutting edge. It appears to have barely been used. There are a several minor chips higher up on the flutes. I have other solid carbide drills and tooling listed here on ebay and tons more that is not listed yet. Get a hold of me with your specific needs I don't have listed what you are looking for. Shipping is FREE for 50 states. Will ship within two days after payment is received.
|
|
|
MITSUBISHI New Point Carbide Tipped Coolant Drill Bit BRA 2050S25, CNC Lathe
MITSUBISHI New Point Carbide Tipped Coolant Drill Bit BRA 2050S25 I checked the dimension and probably did it wrong as I get 0.806 Part Number: BRA2050S25 UP20M. Product ID: MIT 100398. Manufacturer: MITSUBISHI. Price New $260.00. Category: Drilling- Carbide. Description: BRAZED DRILL. Grade name: UP20M. Insert Material: CARBIDE- PVD COATED. Grade Description: Conventional PVD coated cemented carbide for milling and turning of steel. If you live in Canada and there you may be required to pay additional customs charges. Please check my other Lathe and HVAC Tools. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-143a18e42ea-0xfe-
|
|
|
Exxair 5215 Cold Gun Dual Hose Drill Air Coolant Gun New Still Sealed
Exxair 5215 Cold Gun Dual Hose Drill Air Coolant Gun New Still Sealed. Exxair 5215 Cold Gun Dual Hose Drill Air Coolant Gun New Still Sealed. Estate sale find. Found in old work shop on top shelf. Still in shipping box. Still sealed in plastic. unused. Please! View all photos that are provided in the listing. They are part of the description.Most of the items I sell are all garage sale. Estate and auction finds. ALL items are honestly and accurately described to the best my ability allows. Each person has his or her own standards regarding condition. Therefore, please read my descriptions carefully and ask any questions before bidding, As with any vintage or used items I may miss something. If this happens, please contact me ASAP so we can work out a solution to your satisfaction. I am always open to questions and suggestions, so feel free ... moreto email. NOTE TO INTERNATIONAL BUYERS: BUYERS MUST CONTACT SELLER FOR A SHIPPING QUOTE"BEFORE" BUYING. INTERNATIONAL BUYERS PAY FOR ALL SHIPPING COST. I ONLY USE USPS PRIORITY MAIL WITH TRACKING AND INSURANCE. so don't be surprised that it actual cost money to ship to the other side of the world. BE SURE TO VISIT MY STORE FOR A WIDE VARIETY OF GIFTS. COLLECTIBLES, POTTERY, GAMES, BOOKS, AND MUSIC. Enco DaWa Leveling Stabilzers, Franklin Mint B-17G Flying Fortress, Model Kit Dallas Revenue Cutter New York, Warhammer 40k Space Marines Assault Squad Carole Westlund Pottery, Jon Sauer Lathe Artist Exotic Wood Spinning Top, Jon Sauer Lathe Artist Exotic Wood Spinning Top, Lone Star Luger Cap Gun, Vintage Kays Ranchland Leather Tri-Pod Seat Cover, Vintage Dog Fight Photo, THANKS FOR LOOKING. My Shipping Policies: ECONOMY SHIPPING: $6.95. EXPEDITED SHIPPING 8.95( Alaska and Hawaii may be more) and costs may vary to other places. Paypal is the only acceptable form of payment. International buyers agrees to contact seller BEFORE buying for a shipping quote and to pay for all shipping cost. If you ship overseas and you pay with Paypal. All items must be shipped with
|
|
|
7.20mm Sandvik R840-0720-30-A1A 1220 Solid Carbide Coolant Thru Drill (K700)
USED. GOOD CONDITION. Quantity of 1 Sandvik R840-0720-30-A1A 1220 Coolant Thru Drill Item Type List Number Grade Material Decimal Equivalent Flute Length(In. Overall Length(In. Shank Dia. In. Application For High Productive Drilling of Small Holes Checkout My Other Save BIG with Combined Shipping Discounts! TX Residents must pay 8.25% Sales Tax. Posted with
|
|
|
VALENITE 2-3/8" INDEXABLE COOLANT FED DRILL w/ 2" SHANK + INSERTS
aims VALENITE 2-3/8" INDEXABLE COOLANT FED DRILL w/ 2" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Valenite. This is a an Indexable Drills with Coolant Induced straight shank and inserts in good condition. Model# VWDR-238-200-911A. Features: Clean through hole cutting and efficient chip removal. Greater stability for deeper drilling than conventional drill. Deeper drilling depths gives lowest cost per hole. Faster. More profitable production in shop. Specifications: Cutting Capacity: 2-3/8" Cutting Depth: 8" Straight Shank: 2" Overall Length: 12-3/4" Come as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more ... moreGreat Deals! Bidding starts at a dollar with no reserve. VALENITE 2-3/8" INDEXABLE COOLANT FED DRILL w/ 2" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
KENNAMETAL / KENDEX METCUT 2" COOLANT FED INDEXABLE DRILL W/ INSERTS
aims KENNAMETAL/ KENDEX METCUT 2" COOLANT FED INDEXABLE DRILL W/ INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. This is a Coolant Fed Indexable Drill in good condition. Model# 270-0212 Specifications: Cutting Capacity: 2" Cutting Depth: 6" Shank: 1-3/4" Overall Length: 11" Come as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL/ KENDEX METCUT 2" COOLANT FED INDEXABLE DRILL W/ INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
KENNAMETAL / KENDEX METCUT 2-1/4" COOLANT FED INDEXABLE DRILL W/ INSERTS
aims KENNAMETAL/ KENDEX METCUT 2-1/4" COOLANT FED INDEXABLE DRILL W/ INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. This is a Coolant Fed Indexable Drill in good condition. Model# 270-0237 Specifications: Cutting Capacity: 2-1/4" Cutting Depth: 6-3/4" Shank: 2" Overall Length: 12-1/2" Come as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL/ KENDEX METCUT 2-1/4" COOLANT FED INDEXABLE DRILL W/ INSERTS Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-143a2721216-0x102-
|
|
|
Allied 22010S-075L Spade Drill Holder 45/64" to 15/16" Coolant Fed
Allied Spade Drill Holder( 22010S-075L) Drill Insert Range: 45/64" to 15/16" Shank Diameter: 3/4" Max Drilling Depth: 2-5/8" Overall Length: 6-7/8" Coolant Fed: Yes Type: Straight Shank and Flute Made in USA This drill is in very good condition. Will ship out one day after receipt of payment.
|
|
|
KOMET .875" KUB Trigon ABS 50 Indexable Drill Coolant Fed
KOMET KUB Trigon ABS 50 Indexable Drill Drill Diameter: 0.875" Drilling Depth: 1.750" Cutting Direction: Right Coolant Fed: Yes Inserts Required: 2 Made in USA This drill is in good condition. Will ship out one day after receipt of payment.
|
|
|
YG P13101 Spade Drill Holder 45/64" to 15/16" Coolant Fed (Excellent)
YG Coolant Fed Spade Drill Holder(P13101) Drill Insert Range: 45/64" to 15/16" Shank Diameter: 3/4" Max Drilling Depth: 2-5/8" Overall Length: 6-7/8" Type: Straight Shank Straight Flute Made in USA This drill is in excellent condition. Will ship out one day after receipt of payment.
|
|
|
AMEC Drill Body Spade Drill Blade Insert Holder Extra Long! Coolant Through
You are bidding on used. But it in great working condition, AMEC drill body 27010S-100L#1 T-A EXT XL 1"SS Extended length. Shank- Straight Minimum Drilling Diameter- 45/64" Maximum Drilling Diameter- 15/16" Maximum Drilling Depth- 18" Overall Length– 22-1/4" Flute Type– Straight Catalog price for new over $270. I did my best to show the condition of the item in the pictures. Please check out my other items that may be useful to your business. International Buyers! Please Note: If you purchase this item you assume all responsibility for customs and its charges. If any. Once I ship it out I am NOT liable for anything concerning customs. I only accept Pay-Pal. Payment must be received within 3 days. I will ship the item the next business day after payment is received. Thank you for looking. If you have any questions ... moreplease contact me.
|
|
|
ELDORADO COOLANT GUN DRILL 0.4865 x 22" CARBIDE TIPPED
ELDORADO COOLANT GUN DRILL 0.4865 x 22" CARBIDE TIPPED Brand Elderado Packaging In Tube Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
SECO PerfoMAX 17mm Indexable Drill 4xD Coolant Fed (SD504-17-68-25R7)
SECO PerfoMAX 4xD Indexable Drill(SD504-17-68-25R7) Drill Diameter: 17mm Shank Diameter: 25mm Drilling Depth: 68mm Overall Length: 154mm Center Insert: SPGX 0502-C1 Peripheral Insert: SCGX 050204. Coolant Fed: Yes Made in Sweden This drill is in good condition. Will ship out one day after receipt of payment.
|
|
|
USED CJT KOOLCARB USA STRAIGHT SHANK 25/32" CARBIDE TIPPED COOLANT DRILL .7812"
LISTING IS FOR A USED CARBIDE TIPPED COOLANT DRILL BRAND: CJT KOOLCARB MADE IN THE USA DIAMETER: 25/32" FLUTE LENGTH: 5.25" OAL: 8.625" SHANK: 780" CONDITION: GOOD USED NEEDS RESHARPENED A FEW SMALL CHIPS ON CARBIDE Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS ... moreDAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUES
|
|
|
6.3 mm Guringh tin Carbide coolant fed drill
6.3 mm Guringh tin Carbide coolant fed drill
|
|
|
15.6 MM Mitsubish Solid Carbide Drill With Thru Coolant
15.6 MMMitsubishi solid carbide drill with they coolant VP15TF MWS156B Flute length 2.750 Posted with eBay Mobile Posted with
|
|
|
.758 Mitsubish Solid Carbide Drill With Thru Coolant
758 Mitsubishi solid carbide drill with they coolant VP15TF MZS075MB Flute length 3.500 Posted with
|
|
|
Allied 25025H-125F Extended Spade Drill Holder 1-3/16" to 1-3/8" Coolant Fed
Allied Extended Spade Drill Holder(New EDP# 25025H-125F/ Old EDP# 2132.5T-1250) Drill Insert Range: 1-3/16" to 1-3/8" Shank Diameter: 1-1/4" Max Drilling Depth: 11-3/8" Overall Length: 15-11/32" Coolant Fed: Yes Type: Flanged Shank and Helical Flute Made in USA This drill is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Allied 24010H-004I Spade Drill Holder #4MT 45/64" to 15/16" Coolant Fed
Allied#4MT Spade Drill Holder(New EDP# 24010H-004I/ Old EDP# 221T-0004) Drill Insert Range: 45/64" to 15/16" Max Drilling Depth: 6-3/4" Overall Length: 14-5/32" Type: Taper Shank and Helical Flute Made in USA This drill is used and comes with 15/16" insert shown. Will ship out one day after receipt of payment.
|
|
|
LAST ONE! RESHARPENED MOHAWK USA STRAIGHT SHANK .521"+/- COOLANT TWIST DRILL
LISTING IS FOR A RESHARPENED COOLANT TWIST DRILL BRAND: MOHAWK SIZE: 521" +/ FLUTE LENGTH: 5.50" OAL: 8.00" COOLANT THROUGH CONDITION: VERY GOOD USED HAS BEEN RESHARPENED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS ... moreWELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTIN
|
|
|
GUHRING Jobber Drill, Coolant Fed, 23/64 In, 3 1/2 OAL, 1 3/4 Cutting Length
Up for auction is 1 GUHRING Jobber Drill. Coolant Fed, 23/64 In, 3 1/2 OAL, 1 3/4 Cutting Length, I believe this is a regrind but I am not sure. Payment is asked to be made within 24 hours of auctions end. Thank you for looking and happy bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-143dcb60df4-0xeb-
|
|
|
Kennametal coolant thru inserted drill New 18 in Starrett flex scale c305r w BIN
Kennametal Insert drill over $950.00new very little use on this drill with ten new snmp 433k kc850 inserts $150.00 With four indexable inserts. Each having four cutting edges, the Kennametal insert drill is the ideal tool for achieving the highest productivity, while maintaining tight tolerances. Please see the pictures Please read before bidding! By buying from us you agree that you have read and understood all of our policies. Payment details We accept PayPal only! Payment must be paid within 7 DAYS after the auction is closed. Shipping policy We ship worldwide with international flat rate shipping. Free shipping and Starrett is with BUY IT NOW ONLY A tracking number will be provided within 24 hours of the product being shipped. Delivery time depends on destination and other factors. We do combine shipping when possible. For a combined ... moreshipping discount please contact us. Return policy If the item that you have purchased is damaged or not as described. Return it to us within 7 days. We will replace it if possible, or we will give you a full refund of the sale price. Sorry, shipping charges are non refundable) eBay feedbacks If you are satisfied with your purchase. Please tell others by leaving a positive feedback for us and we in return will do the same for you. If you are not satisfied. Please tell us, so that we may correct the problem. Posted with
|
|
|
DIJET 18.75mm TiN Carbide-Tipped Coolant Fed Drill 3xD (SCD-1875-MS)
DIJET 3xD Carbide-Tipped Coolant Fed Drill(SCD-1875-MS) Drill Diameter: 18.75mm Shank Diameter: 25mm Flute Length: 76mm Overall Length: 151mm Point Angle: 140 Degrees Direction: Right Hand Material: Carbide-Tipped HSS Coating: TiN This drill is refurbished or resharpened and is in excellent condition. Will ship out one day after receipt of payment.
|
|
|
1-5/8" CARBOLOY INDEXABLE INSERT COOLANT DRILL 27QDR
CARBOLOY INDEXABLE DRILL 1.625" DIAMETER. 1.500" SHANK. Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1178 Thanks for looking!
|
|
|
1.187" MITSUBISHI INDEXABLE INSERT COOLANT DRILL TASS 1187
MITSUBISHI INDEXABLE DRILL PART NO. TASS 1187. 1.187" DIAMETER 1.250" SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1160 Thanks for looking!
|
|
|
.937" KOMET KUB IT H.D. INDEXABLE INSERT COOLANT DRILL
KOMET KUB-IT H.D. INDEXABLE DRILL.937" DIAMETER. 1.250" SHANK. Used condition. Actual item pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1163 Thanks for looking!
|
|
|
1.281" KOMET KUB IT H.D. INDEXABLE INSERT COOLANT DRILL
KOMET KUB-IT H.D. INDEXABLE DRILL 1.281" DIAMETER. 1.250" SHANK. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1177 Thanks for looking!
|
|
|
KENNAMETAL NO. DTF COOLANT FEED INDEXABLE DRILL .7025 - .8525" + INSERTS
KENNAMETAL NO. DTF COOLANT FEED INDEXABLE DRILL.7025- 8525" Size Range: 7025- 8525" Shank: 1" Projection: 3" Model No. DFT0703R2SSF100
|
|
|
USED SUMITOMO 11/32" SOLID CARBIDE COOLANT TWIST DRILL .3438"
LISTING IS FOR A USED SOLID CARBIDE TWIST DRILL BRAND: SUMITOMO PART# 3438MV DIAMETER: 11/32" FLUTE LENGTH: 1.875" OAL: 3.875" SHANK: 3438" CONDITION: GOOD USED NEEDS RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. ... moreAS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING.
|
|
|
ELDORADO COOLANT GUN DRILL 0.3725 x 10" CARBIDE TIPPED
ELDORADO COOLANT GUN DRILL 0.3725 x 10" CARBIDE TIPPED Brand Elderado Packaging In Tube Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
INDEXABLE COOLANT FED DRILL 1.469" DIAMETER W/ 1-1/4" SHANK 5" LENGTH
Indexable Coolant Fed Drill Model 146030 1RS 1.469" Diameter Cut 5" Cut Length x 9" Overall Length 1-1/4" Straight Shank Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- ... moredo NOT pay eBay auction end notice. If you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Walter Titex A3285TFL-7-2 Carbide Coolant Drill Bit ! WOW !
Walter Titex A3285TFL-7-2 Carbide Coolant Drill Bit! WOW! This item is used. Tested, in good working condition! Pictures above are of actual item for sale. Location W2-M3 Lister: ti. If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store! Powered by
|
|
|
TRW Chicago 5/8" HS Drill 6-1/2" OAL 4-1/2" Flute Coolant Fed Oil Hole
TRW Chicago 5/8" HS Drill- Coolant Fed Oil Hole 6-1/2" OAL 4-1/2" Flute I am selling MANY drills this month AND I ALWAYS DO COMBINED SHIPPING
|
|
|
Trico Coolant Lubricant flex nozzle mister sprayer for drill press mill saw
Vintage trico manufacturing co. coolant/lubricant misting tool for machining and cutting metal plastic etc. Simply place the filter into your oil or coolant. Connect an air hose and twist the thumb screw on the back to get the desired flow. Has a 6" flexible nozzle so you can precisely aim it at your workpiece. I do not have the little stand for it. But if you're the kind of person that would use this tool I'm sure you can come up with something. There is a small hole through the body where you can use a bolt, screw, zip tie etc. to hold it to your machine or work bench. Local pick up is always welcomed. Any questions. Feel free to ask! As always your purchase is guaranteed, returns are accepted only if the item arrives in non working condition or not as pictured. Thanks
|
|
|
AMEC Series #2 part #25020H-125F Spade Drill with through coolant. Extended lgh
Nice used extended length flue spade drill Series#2 T A Drill has through coolant holes at end of bit. List price new is approx. $316.00.
|
|
|
AMEC Series 1.5 part #24015H-0041S060 Spade Drill with through coolant. 15/16
Nice used taper shank(4MT) spade drill Series 1.5 T A for 15/16 inch carbide insert. Drill has through coolant holes at end of bit. List price new is approx. $275.00.
|
|
|
Kennametal Hertel 1.375" Indexable Insert Coolant Drill
Kennametal Hertel 1.375" Indexable Insert Coolant Drill DFT1375R2SSF150 no screws no inserts Is in Excellent Condition. I cannot see any signs that it has been used. Shank Diameter: 1.500" Shank Length: 3.750" Shank Type: Weldon Flat Max hole depth: 3.45" Overall Length 8.75" Made in Germany Price on a new one is $399.50.
|
|
|
SANDVIK 1-7/16" INDEXABLE COOLANT DRILL RA416.2-1437P38-31 COROMANT 1.437"
One SANDVIK RA416.2-1437P38-31 indexable coolant drill; 1-7/16"1.437" 1.5" round shank; shank in excellent condition. I don't think drill has seen much use, some scoring on one flute(see 2nd photo) Plastic tube shows shelf wear. We have more nice tooling in other auctions. Questions welcomed, thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1440c561e32-0xf2-
|
|
|
3/4" x 9" Whalley HS 351 804-041 Coolant-Fed Oil Hole Drill Bit 6-3/8" Flute
Not sure if this is new or used because I don't know enough about how it is supposed to look 3/4" dia G. Whalley Coolant-Fed Drill Bit Taper Length- High Speed- Straight Shank General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22°- 24° helix has constant web thickness with rolled heel providing maximum chip clearance. Diameter: 3/4" Flute Length: 6-3/8" Total Length: 9-3/4" I measured it though and it is 9" I checked every drill bit spec in the Whalley catalog and can't find another with these specs. The stock number is hand-written on its yellow casing. Helix: 22-24 degrees standard in this Series 804 group- I don't know ... moreexactly the degrees for this one Point: 118 degree Notch Web: Standard Weight: 8 oz
|
|
|
1-19/32" Extended Length, Coolant Thru Twist Drill #5MT Shank
Good Condition- I don't think it has ever been used. 1-19/32" Extended Length. Coolant Thru Twist Drill#5MT Shank. 24" Overall Length. 17" hole depth. 3519 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
16mm Twist Drill Bit Coolant Fed Spindle Feeding Oil Hole Metric size
Item. Straight Shank Twist Drill Bit SPLIT POINT COOLANT FEEDING Through spindle Manufacturer. Unknown Diameter. 16mm Shank Size. 16.20mm Overall Length. 9" Flute Length. 5-1/4" Type. 2 Flute high speed steel Taper length SPLIT POINTED TIP Condition. Good sharp used. Not quite as shiny looking as the one in the photo but still in nice shape This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. ... moreI will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
Whalley 3/4" HS Drill 9-1/2" OAL 6" Flute Coolant Fed Oil Hole HS 351
Whalley 3/4" HS Drill- Coolant Fed Oil Hole HS 351 9-1/2" OAL 6" Flute I am selling MANY drills this month AND I ALWAYS DO COMBINED SHIPPING
|
|
|
Whalley 5/8" HS Drill 8-3/4" OAL 5-1/2" Flute Coolant Fed Oil Hole 803-033
Whalley 803-033 288/237 5/8" HS Drill Coolant Fed(Oil Hole) 8-3/4" OAL 5-1/2" Flute
|
|
|
Barnes Drill Co Magnetic/Fabric Media Coolant Filtration System - Used - AM11923
1) Barnes Drill Co Magnetic& Fabric Media Type Coolant Filtration System- Used- AM11923 Model: RMP-25 Serial: TRSP-10055 Capacities: Flow Rate(Cast Iron) 20 GPM Flow Rate(Steel) 40 GPM Includes: Mesh Belt Conveyer and Indexing Controls Tank Assembly Transfer Pump Complete Electrical Controls 1-1/2-HP Pump Motor[per mfg data] 460 Volt/ 3 Phase/ 60 HZ Intigrated Refrigerant Type Chiller Video of machine operating is available upon request. This machine is on our floor available immediately. Subject to prior sale DISCOUNTED SYSTEM PRICE | A S PICTURED | LOADED ON TRUCK | FOB CLEVELAND. OHIO Do not hesitate to call with any further questions and we look forward to doing business with you. A M INDUSTRIAL- EBAY DEPARTMENT- 216-433-7171– www.amindustrialmachinery.com…Dust Extraction…Fabricating Machinery…Sawing& Cutoff…Tube& Pipe… New ... moreArrivals Daily! Conditions: Used items sold hereunder are neither designed nor manufactured by the seller, and this sale of these items is on an as-is and without any representations or warranties. Expressed or implied, of any kind including safety, condition, or quality. Seller further assumes no responsibility to provide safety devices or equipment necessary for the protection of the user or to comply with applicable governmental laws or requirements. It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale. All sales are F.O.B. Cleveland. Ohio unless otherwise specified.
|
|
|
Thru Coolant Spade Drill 1" Shank Amec 1-7/32 Spade Bit
Thru Coolant Spade Drill 1" Shank w/ Amec 1-7/32 Spade Bit Overall length approx 6-3/4"
|
|
|
1-13/16" Dia 1.812" Coolant Feeding Twist Drill bit 15 Long USA Straight shank
Item. Coolant fed SPLIT POINT Tip Drill Bit Size. 1.812" Cutting dia. Manufacturer. Some are made by Cleveland Twist. Some by UB Twist Drill Co US Made in the USA Type. Straight shank coolant through with APPROX. 5/8" RIGHT HAND fine drawbar threads. HSS Shank. 1.812" straight with 1 Flat spot for your set screw Flute Length. 9-1/2" Overall Length. 15" Condition. Super sharp. I just peeled the plastic off the tip for the photo, it is a resharp, looks like it has only been used one time, but the threads in the end of the shank are somewhat corroded from shelf time. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if ... moreyou are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407
|
|
|
Allied 240Y0S-002I Spade Drill Holder #2MT 3/8" to 27/64" Coolant Fed
Allied#2MT Series Y Spade Drill Holder( 240Y0S-002I) Drill Insert Range: 3/8" to 27/64" Max Drilling Depth: 2-3/8" Overall Length: 7-7/16" Type: Taper Shank and Straight Flute Made in USA This drill is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
17mm OSG Solid Carbide 6" Long Drill Through Coolant
OSG 17mm SOLID CARBIDE DRILL 6" Long For sale I have a used 17mm OSG Solid Carbide Drill. It has through coolant. Is 6" in length and has approx. 3 1/2" of flute. There is a very small chip on the tip of the drill- on one side, about 3/16" from the center. Besides that, the drill doesn't even really show any signs of use. I have a ton of other solid carbide drills and tooling that is not currently listed on eBay. Get a hold of me with what you are looking for. Paul(734) 812-9990 Shipping is $6.00 for 50 states. Will ship out within two days after payment is received.
|
|
|
15mm Guhring Solid Carbide 7 5/8" Long Drill Fire Through Coolant
GUHRING 15mm SOLID CARBIDE DRILL 7 5/8" Long For sale I have a used 15mm Guhring Solid Carbide Drill. It has through coolant. Is 7 5/8" in length and has approx. 5 1/2" of flute. I don't see any wear on the outside corners and the tip. The only thing worth mentioning is that a little of the coating looks like it has came off. I have a ton of other solid carbide drills and tooling that is not currently listed on eBay. Get a hold of me with what you are looking for. Paul(734) 812-9990 Shipping is $6.00 for 50 states. Will ship out within two days after payment is received.
|
|
|
13.5mm Guhring Solid Carbide 9" Long Drill Fire Through Coolant
GUHRING 13.5mm SOLID CARBIDE DRILL 9" Long For sale I have a used 13.5mm Guhring Solid Carbide Drill. It has through coolant. Is 9" in length and has approx. 6 3/4" of flute. This was loose in a tool box I bought. The outside corner on the tip has a tiny chip on it, but besides that, the rest of the drill is in excellent condition. I have a ton of other solid carbide drills and tooling that is not currently listed on eBay. Get a hold of me with what you are looking for. Paul(734) 812-9990 Shipping is $6.00 for 50 states. Will ship out within two days after payment is received.
|
|
|
Titex 29/32 .906 diameter coolant fed insert drill Approx 7x dia length
Titex 29/32.906 diameter coolant fed insert drill Approx 7x dia length Roughly 6.5 max flute Mounting end turned down to fit 3/4(750) holder
|
|
|
USED CARBOLOY INSERT COOLANT DRILL 3.00" DBI-SSCS-48 (TNMM 434E , SNMM 4.534E)
LISTING IS FOR A USED CARBOLOY INSERT DRILL BRAND- CARBOLOY PART# DBI-SSCS-48 DIAMETER- 3.00" FLUTE LENGTH- 6.00" OAL- 12.50" SHANK- 2.50" USES INSERTS- TNMM 434& SNMM 4.534(NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS ... moreOF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS
|
|
|
Jancy Slugger Max 2 x 2 MT2 Portable Magnetic Drill with Coolant Bottle # 17980
Jancy Portable Magnetic Drill CLOSE OUT! This is our last Jancy portable magnetic drill that we have in stock. It has been semi used for a few demos and was also used as our store display model. We had it tested and it is in working condition. Operator's Manual& Shunt Instructions were missing. So we reprinted them. No Safety& Maintenance CD or Warranty card. All other items that would be included are included. Includes: Magnetic Drill, HEX Keys, Combination Wrench, Knob& Spoke Handle, Safety Strap, Knock-Out Wedge, 2MT Arbor Assembly, Coolant Bottle Assembly. Case has some dents and some rust. Actual drill may show some wear like scratches. see pictures for details) Please Message us with ANY questions that you may have. Price is Negotiable Specifications Model: Slugger Max 2 X 2 Product Number: 17980 Motor: 120V/10.2A. 300/570 ... moreRPM(no load) Spindle Bore: 2 Morse Taper Arbor Bore: 3/4" 19.05mm) Drill Point Breakaway: 1111 lbs. on 1" plate Magnet Base Dimensions: 3-1/2" X 8" Magnet Dead Lift: 2657 lbs. on 1" plate Slugger Cutter Diameter(MAX) 2" Slugger Depth of Cut(MAX) 2" Spindle CL to Guard Face: 3-3/8" Spindle CL to Magnet Face: 1-11/16" Spindle CL to Motor Face: 1-9/16" Total Travel: 3-5/8" Features 2 speed gear box 2" diameter through 2" material external coolant system 1/2" twist drill capacity(screw machine length) ships with#2 morse taper arbor"SMART MAGNET" circuitry Payment Method: PayPal Preferred Shipping: We offer FAST& FREE shipping with UPS Ground to any of the continental 48 states. UPS Ground states that it can take 1-5 business days for delivery. Return Policy: This item is a closeout. So returns are excepted within 14 days from the day of delivery according to UPS. Please know because this item is a close out there will be a 15% restocking fee and buyer will pay for return shipping. Please send us a message if you have ANY questions before making this purchase. Please call Preferred Welding at 77
|
|
|
MAGIC DRILL COOLANT FEED INDEXABLE DRILL 1.375" W/ 1 1/4" SHANK
MAGIC DRILL COOLANT FEED INDEXABLE DRILL 1.375" W/ 1 1/4" SHANK Model No. S125 DR13752750-12 Size: 1.375" Shank: 1 1/4" OAL: 7" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request*
|
|
|
Seco Inserted Drill 1.125 2XD Coolant Through
Coolant through Seco 1.125 diameter inserted drill Posted with
|
|
|
ACME 1 3/8" COOLANT FEED SPADE DRILL W/ 1" SHANK
ACME 1 3/8" COOLANT FEED SPADE DRILL W/ 1" SHANK Size: 1 3/8" Shank: 1" OAL: 8" LOC: 4" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need some thing. Don't see it listed drop us a line@ RandC.auctions@gmail.com*
|
|
|
Guhring 9mm (.354) Solid Carbide Coated Drill Coolant Thru VERY NICE!!
Guhring Carbide Drill SPECS: Mfg: Guhring Model# 05525-9.00 9mm(354) Diameter'X' Point Geometry Coated Solid Carbide Flute Length 4-3/4" O.A.L. 6-1/2" Item is in VERY NICE Used Condition. Retail is OVER $250.00 NEW New Ebay Buyer Protection Policy has caused me to raise my shipping Rates to Included a Signature Delivery on ALL my items. Thanks Ebay! Please pay within 36 hrs of Auction Close* PAYPAL Only Please* Thank You
|
|
|
3.000" KOMET KUB-IT H.D. INDEXABLE INSERT COOLANT DRILL OAL 12" Made in USA
3.000" KOMET KUB-IT H.D. INDEXABLE INSERT COOLANT DRILL OAL 12" shank 4" long and 1-7/8" thick 1-3/4" on the flats of the shank main body is 8" Made in USA- doesn't come with inserts
|
|
|
USED CLEVELAND CLEFORGE USA 1" STRAIGHT SHANK COOLANT TWIST DRILL 1.00"
LISTING IS FOR A USED STRAIGHT SHANK COOLANT TWIST DRILL BRAND: CLEVELAND CLEFORGE MADE IN THE USA DIAMETER: 1" FLUTE LENGTH: 2.75" OAL: 8.00" CONDITION: GOOD USED MAY NEED RESHARPENED A FEW FLATS GROUND ON SHANK Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF ... moreAUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTION
|
|
|
Clausing Twin 20" Drill Press on 40X24 Table, DRO Scale, Coolant & Splash Guard
You are looking at one of the most productive drill presses you will ever see. It has a complete coolant system with a return to a tank in the table base. A splash guard to keep it contained and a digital scale on one of the heads for accurate depth control. The step pulleys are super quiet and the drills look and run like new. We will even give you a 1 year warranty like new! CLAUSING 20" DUAL HEAD DRILL PRESS STEP PULLEY WITH 208-220/440 3-PHASE MOTORS 40" X 24" CAST IRON TABLE/ 43" COLUMNS COOLANT SYSTEM WITH NOZZLES FOR BOTH DRILLS 115V COOLANT PUMP WITH TANK SPLASH GUARD DIGITAL SCALE ON ONE OF THE HEADS This unit has been"reconditioned" Repainted and is in excellent mechanical condition. It wasn't at all bad to start with, but it's really like new now. Everything works like it should and it is ready ... moreto go into service immediately. No apologies here! This drill press features some of our latest innovations: Digital Scale. Coolant System and Splash Guard. This drill press has a cast iron table and is very heavy. We can help with freight quotes if you need. Just let us know! Overall table size: 40" x 24" x 35" H igh Step p ulley HP: 1.5 drive motors RPM: 1725 Voltage: 208-220/440. 3-phase Please contact us if you have any questions at all. We have several trucking companies we work with regularly and we can help you get trucking quotes. We encourage you come and see this Drill Press located in Eastlake. Ohio
|
|
|
NICE! KOMET MIMATIC KMDC MILL DRILL CHUCK & KRSD COOLANT RING W/ CAT40 SHANK
Made in the U.S.A. by Komet This is a nice chuck/ coolant ring/ shank setup in good condition. Model Numbers: Mimatic Mill Drill Chuck: KMDC 0.5-13 ABS50 A34 24021 Coolant Ring: KRSD 50 L0100410 Shank: ABS 50 CAT 40 KR Specifications: Shank: CAT40 Connections: ABS50 Chuck Capacity: 0.020" 0.512" Overall Dimensions: 11.5" long x 4.6" diameter of coolant ring) x 6.9" width along coolant connection axis) Comes as shown in pictures.
|
|
|
2-1/8" SECO INDEXABLE INSERT COOLANT DRILL
SECO INDEXABLE DRILL 2.125" DIAMETER. 1.500" SHANK. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1179 Thanks for looking!
|
|
|
ISCAR MODEL DZ-1000-3000-125-2.5 INDEXABLE COOLANT FED DRILL SERRATED INSERT
Iscar Indexable Coolant Fed Drill Model DZ-1000-3000-125-2.5 Accepts Serrated Triangular Inserts Cut Length 3" x 8" Overall Length Shank Measures 1-1/4" From Manufacturer's Website: Hole Making Family: Indexable serrated insert drills. Drilling depth 3xD. Designation: DZ1000-3000-125-2.5 D L L1 L4 d D3 1.000, 3.00, 4.37, 2.36, 1.250, 1.970, Catalog No Primary View File(2D) Model(3D) Detail Model(3D) Light 3200171, Not Available Spare Parts 7000274, T-8/53, For optimal tightening torque. Use SW4-FIX T08 optional torque limiting screwdriver. 7000892, SR 14-560, 7001898, PLG 1/4PTF Z C, No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within ... more5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|