|
Hannibal 15/64" 135º Split Point Carbide Tipped Drill Bit 63115
Hannibal 15/64" 135º Split Point Carbide Tipped Drill Bit 63115 6-1/8" Overall Length 3-3/4" Flute Length Quantity Available: 21 Shipping Weight: 1 lbs. ADZ166 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which ... moreare charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you
|
|
|
Assortment of PAHL 3/16" Stainless Carbide Tipped Drill Bits 3-1/2" Flute
Assortment of PAHL 3/16" Stainless Carbide Tipped Drill Bits 3-1/2" Flute Quantity Available: 1 Shipping Weight: 3 lbs. ADZ163 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing ... morewe have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To
|
|
|
(7) 1/4" Carbide Tipped Tapered Length Straight Shank Drill Bits 9" Flute
7) 1/4" Carbide Tipped Tapered Length Straight Shank Drill Bits 9" Flute Shipping Weight: 2 lbs. ADZ161 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over ... moreand is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phon
|
|
|
Assortment of Carbide Tipped Tapered Shank Drill Bits 15/64" - 57/64" Range
Assortment of Carbide Tipped Tapered Shank Drill Bits 15/64" 57/64" Range Shipping Weight: 27 lbs. ADZ160 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by ph
|
|
|
Assortment of Precision Twist & LSI 23/32" Carbide Tipped Drill Bits
Assortment of Precision Twist& LSI 23/32" Carbide Tipped Drill Bits Standard Taper Shank Shipping Weight: 10 lbs. ADZ159 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have ... moreno control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place
|
|
|
Assortment of Hannibal 25/64" 118º Split Point Carbide Tipped Drill Bits 66025
Assortment of Hannibal 25/64" 118º Split Point Carbide Tipped Drill Bits 66025 Model: 66025 Standard Taper Shank Shipping Weight: 12 lbs. ADZ157 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. ... moreThis is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regard
|
|
|
Hannibal 27/64" 135º Split Point Carbide Tipped Drill Bit 63127
Hannibal 27/64" 135º Split Point Carbide Tipped Drill Bit 63127 Model: 63127 4-5/8" Flute Length Quantity Available: 28 Shipping Weight: 1 lbs. ADZ156 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by ... morethe carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any quest
|
|
|
Hannibal 11/32" 118º Standard Point Carbide Tipped Taper Length Drill Bit 63022
Hannibal 11/32" 118º Standard Point Carbide Tipped Taper Length Drill Bit 63022 Model: 63022 4-1/8" Flute Length Quantity Available: 9 Shipping Weight: 1 lbs. ADZ155 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which ... moreare charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you
|
|
|
(18) Precision Twist 15/32" HS Carbide Tipped Taper Shake Drill Bits
18) Precision Twist 15/32" HS Carbide Tipped Taper Shake Drill Bits Shipping Weight: 6 lbs. ADZ154 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is ... morean additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please
|
|
|
Assortment of Cleveland & Hannibal 29/64" Carbide Tipped Taper Shake Drill Bits
Assortment of Cleveland& Hannibal 29/64" HS Carbide Tipped Taper Shake Drill Bits 66129 28 Drill Bits in Total Quantity Available: 1 Shipping Weight: 9 lbs. ADZ153 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged ... moreby the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with an
|
|
|
(5) Cleveland 9/16" HS Carbide Tipped Taper Shake Drill Bits
5) Cleveland 9/16" HS Carbide Tipped Taper Shake Drill Bits Shipping Weight: 3 lbs. ADZ152 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856
|
|
|
(2) 23/32" High Speed Carbide Tipped Taper Shake Drill Bits
2) 23/32" High Speed Carbide Tipped Taper Shake Drill Bits Shipping Weight: 2 lbs. ADZ151 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856)
|
|
|
(2) Precision Twist 59/64" Carbide Tipped Taper Shake Drill Bits
2) Precision Twist 59/64" Carbide Tipped Taper Shake Drill Bits Shipping Weight: 3 lbs. ADZ149 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call
|
|
|
Durapoint 0.9398" Carbide Tipped Reamer 2067-2-10Z
Durapoint 0.9398" Carbide Tipped Reamer 2067-2-10Z Quantity Available: 1 Shipping Weight: 1 lbs. ADZ174 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and ... moreis an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Pl
|
|
|
Durapoint 0.462" Carbide Tipped Reamer PT-89126
Durapoint 0.462" Carbide Tipped Reamer PT-89126 Quantity Available: 1 Shipping Weight: 1 lbs. ADZ173 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is ... morean additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Pleas
|
|
|
2 pieces .718" Coolant Through Carbide Tipped Drill bit shank round 5/8"
2 pieces.718" Coolant Through Carbide Tipped Drill bit shank round 5/8" Very sharp carbide tipped. I don't know who in made. 718" x 2-3/8" deep cut x 5/8" Shank Round. Good condition.
|
|
|
Lot Of Machinist Boring Tools- New & Used. A Few Carbide Tipped. Great Deal
Dads downsizing his tool collection! Lot of boring tools Some new(as in never used) and some used Assortment of shanks size ranging from largest 1" down to the smallest 1/4" Most are 1/2 or less Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13ffb6526b3-0xf4-
|
|
|
Assortment of Hannibal 1/4" Standard Point Carbide Tipped Drill Bits 66016
Assortment of Hannibal 1/4" Standard Point Carbide Tipped Drill Bits 66016 Model: 66016 Standard Taper Shank Shipping Weight: 4 lbs. ADZ158 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is ... moresomthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your o
|
|
|
BROWN & SHARPE 11" - 12" CARBIDE TIPPED OUTSIDE MICROMETER W/ STANDARD & CASE
aims BROWN& SHARPE 11" 12" CARBIDE TIPPED OUTSIDE MICROMETER W/ STANDARD& CASE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Brown& Sharpe. This is a Carbide Tipped Outside Micrometer with Standard& Case in good condition. Features: Spindle-Lock. Enamel Finish. Specifications: Range: 11" to 12" Standard Size: 11" End Diameters: 250" Graduations: 001" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BROWN& SHARPE 11" 12" CARBIDE TIPPED OUTSIDE ... moreMICROMETER W/ STANDARD& CASE BROWN& SHARPE 11" 12" CARBIDE TIPPED OUTSIDE MICROMETER W/ STANDARD& CASE BROWN& SHARPE 11" 12" CARBIDE TIPPED OUTSIDE MICROMETER W/ STANDARD& CASE Reliable Tool Inc. c 2011 | Powered by
|
|
|
MITUTOYO 1" MULTI ANVIL MICROMETER , .0001 , CARBIDE TIPPED , P/N 117-107 , XLNT
UP FOR AUCTION IS A MITUTOYO 0 TO 1 INCH MULTI ANVIL MICROMETER. THIS MEASURES IN.0001. FRICTION THIMBLE AND CARBIDE TIPPED ANVIL. THIS LOOKS LIKE THE OWNER BOUGHT THIS AND USED IT VERY LITTLE IT IS IN EXCELLENT CONDITION THIS IS MITUTOYO P/N 117-107 WILL DO MY BEST TO COMBINE SHIPPING, FEEL FREE TO EMAIL ME AT WITH ANY QUESTIONS.
|
|
|
carbide tipped shaper/planer cutter
used carbide tipped shaper/planer cutter. 3 blades outside diameter 3&3/4 nches. thickness 1 inch. inside hole diameter 1 inch. cutter is stamped with A8637
|
|
|
(3) Cleveland 7/8" HS Carbide Tipped Taper Shake Drill Bits
3) Cleveland 7/8" HS Carbide Tipped Taper Shake Drill Bits Shipping Weight: 4 lbs. ADZ146 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856)
|
|
|
CARBIDE TIPPED FACECUTTER R.H 6" OD VR/ WESSON CO.
for sale 1EA VR/WESS ON CARBIDE TIPPED FACE CUTTER OD6" W2.3"BORE ID1.489"LOOK LIKE TAPERED 3ea Insert look like been chipped described the best i can do. Unit sold as is thanks for looking.Contact us/w any question
|
|
|
Ryobi 10" x 5/8" 24 tooth carbide-tipped saw blade #4650301
Excellent condition! Ryobi 10" combination Part#4650301 Carbide-tipped. 24 teeth Max RPM 5500 Will ship in this DeWalt case for safety and protection of blade. Posted with
|
|
|
LOT OF KENNAMETAL GL-16 CARBIDE TIPPED TOOL BITS
aims LOT OF KENNAMETAL GL-16 CARBIDE TIPPED TOOL BITS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal. This is a Lot of Carbide Tipped Tool Bits in good condition. For General purpose turning. Facing and boring. Specifications: Type: GL-16. Tip Width: 1/4" 5/16" Shank Sizes: 1" x 1" Overall Lengths: 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF KENNAMETAL GL-16 CARBIDE TIPPED TOOL BITS Reliable Tool Inc. c 2011 | Powered by
|
|
|
PAHL Tool .1840" Diameter Carbide Tipped Reamer PT-91663
PAHL Tool.1840" Diameter Carbide Tipped Reamer PT-91663 Model: PT-91663 10" Overall Length Quantity Available: 7 Shipping Weight: 1 lbs. ADZ167 1.4.D L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. ... moreThis is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regardi
|
|
|
Custom Handrail Corrugated Back Carbide Tipped Molder/ Shaper Knives
Set of Carbide tipped knives with template for custom handrail. 1 3/4" x 3 1/8"
|
|
|
LIGHTLY USED CARBIDE TIPPED / BRAZED TURNING TOOL BITS BR-16 STYLE "B" 1"-SHANK
LISTING IS FOR A LIGHTLY USED CARBOLOY CARBIDE TIPPED/ BRAZED TURNING TOOL BIT BRAND- CARBOLOY SHANK- 1.00" OAL- 7.00" CARBIDE GRADE- UNKOWN(EITHER 370 OR 883 GRADE) TURNING TOOL WITH 15° LEAD ANGLE FOR TURNING. LIGHT PLANNING, FACING, BORING, AND OR MILLING CONDITION- LIGHTLY USED. IF AT ALL SOME WEAR FROM PREVIOUS STORAGE Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING ... moreIF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR
|
|
|
2 LIGHTLY USED CARBIDE TIPPED / BRAZED TURNING TOOL BITS C-64 STYLE "C" GRADE370
LISTING IS FOR 2 LIGHTLY USED CARBOLOY CARBIDE TIPPED/ BRAZED TURNING TOOL BIT BRAND- CARBOLOY SHANK- 3/4" X 1.00" OAL- 6.00" CARBIDE GRADE- 370 SQUARE NOSE TOOL FOR FORMING. GROOVING, TURNING, CHAMFERING, AND OR FACING CONDITION- LIGHTLY USED. IF AT ALL SOME WEAR FROM PREVIOUS STORAGE Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING ... moreFOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE
|
|
|
USED CARBIDE TIPPED SHELL REAMER 1.720"+/- (For use w/ #8 shell reamer arbor)
LISTING IS FOR A USED HSS SHELL REAMER BRAND- SIZE- 1.720" +/ Size is approximate FLUTE LENGTH- 2.375" ARBOR HOLE SIZE- 1.00" FOR USE WITH SHELL REAMER ARBOR SIZE#8(ARBOR IS NOT INCLUDED) CARBIDE TIPPED STRAIGHT FLUTE RIGHT HAND CUT CONDITION- GOOD USED. NEEDS RESHARPENED A FEW CHIPS ON CARBIDE Normal 0 Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) ... morePLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME.
|
|
|
LARGE LOT HSS AND CARBIDE TIPPED TOOL BITS kennametal, carboloy METAL LATHE
Large lot of high speed steel and carbide tipped lathe tooling All different sizes. Posted with
|
|
|
Irwin 16120 6-1/2" Carbide Tipped Adjustable Dado Set 0269-11
Irwin 16120 6-1/2" Carbide Tipped Adjustable Dado Set-Stock No. 16120-Made in New Zealand QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 201-497-6767 SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees ... moreof the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Send us your zip code and ship to address is it commercial with or without loading dock or residential. All quotes will be for street delivery. Due to the cost of fuel. Please ask for a freight quote. We do not mark up freight; we will add a handling cost to the quote. NJ Sales tax; Items delivered within the State of New Jersey are subject to a 7% sales tax. All shipments will ship to the confirmed address in the buyer's PayPal account. RETURN POLICY; Returns will not be accepted if the equipment is not in the same condition as when it was shipped to the buyer. Photo and condition of equipment will be noted on the bill of lading. Buyer is responsible for return shipping. All international shipping; As the buyer you understand if you instruct us to ship your item USPS In
|
|
|
LAST 2 USED EMPIRE TOOL CARBIDE TIPPED PARTING BLADES P5 / T9 (.187" & .248")
LISTING IS FOR 2 USED CARBIDE TIPPED PARTING BLADES BRAND- EMPIRE STYLE- P5/ P9 WIDTH- 187" 248" HEIGHT- 875" 1.125" OAL- 5.12" 5.50" CONDITION- GOOD USED ONE HAS VERY LITTLE CARBIDE LEFT. AND ONE NEEDS RESHARPENED LAST ONES! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE ... moreWITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. I
|
|
|
LEXINGTON TOOL USA 7/8" CARBIDE TIPPED STRAIGHT FLUTE COOLANT DRILL 365856
LEXINGTON TOOL USA 7/8" CARBIDE TIPPED STRAIGHT FLUTE COOLANT DRILL 365856 15" OAL 7/8" SHANK
|
|
|
5" Octomill Carbide Tipped Face Mill
5" diameter Octomill complete with inserts.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1400df3971a-0xfc-
|
|
|
3/4" STRAIGHT SHANK DRILL BIT lathe mill drilling tool LSI USA CARBIDE TIPPED
used straight shank drill- carbide tipped LSI USA 23/32" shank x 3/4" dia. slightly chipped but usable please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 1 ~ 3/4" Shank 3-1/2" Rosette Cutter - Carbide Tipped
Today's Auction Specialized. Hard to Find, Bulk Quantities and Dirt Cheap Prices on Electrical, Fasteners, Tooling and Hardware. Lot of 1 ~ 3/4" Shank 3-1/2" Rosette Cutter- Carbide Tipped- Used. We are listing several lots of tooling this week from the same woodworking factory so please check our other auctions. Please use the zoom feature to review pictures for details. Shipping Please take advantage of Combined Shipping on fasteners and hardware.We take full advantage of the USPS mantra"If It Fits. It Ships" We ship all items next business day. All Orders over $100 ship free Combination Orders are what we do Best. Fasteners& Hardware.Store Inventory. Buy It Now Listings. We consider packing& shipping an art form. Even though we weigh and cube each item listed. We can almost always save money using a wide ... morearray of flat rate boxes. Each item is calculated in multiples to save time at checkout. Feel free to mix& match. If your shipping charges do not appear fair. Please select"request total from seller" before paying and we will send you a new invoice with exact shipping. You will never pay more than $14 shipping on any combination order less than $100 and Free shipping after that. Our customers are now getting their"MBA's"Mixed Box Advantage! Please select"request total from seller" at checkout if your order total is $100 or more. About Us 2farmin sells in many categories of new and used items including collectibles. Hardware, reclaimed pieces, antiques, lighting, farm stuff and closeouts. We know what it is like to have to make good deals to make your money stretch. We take pride in our reputation as dependable and accurate sellers with the ability to ship all items at a fair price and well packaged. To that end, please send us an email to request volume pricing and additional information. We acquire our inventory items from Farm. Factory& Business closeouts all over the USA. Please take time to view our other listings for more great ways
|
|
|
LEXINGTON TOOL USA 9/16" CARBIDE TIPPED STRAIGHT FLUTE COOLANT DRILL 365036
LEXINGTON TOOL USA 9/16" CARBIDE TIPPED STRAIGHT FLUTE COOLANT DRILL 365036
|
|
|
Brown & Sharpe No. 599-3 0-1" .0001 Slant-Line Carbide-Tipped Micrometer
This is a used Brown& Sharpe No. 599-3 0-1” 0001 outside micrometer with carbide tips. Enamel frame and slant-line calibrations. It has an inventory number etched on the frame. But works smoothly– I do not have the original box. This is a GREAT addition to your metalworking tool box. The winning bidder will pay shipping and handling. I will combine with other items I have listed in order to hold down shipping costs.
|
|
|
LOT OF ASSORTED CARBIDE TIPPED MICROBORE INSERTS - 3/4"-20
aims LOT OF ASSORTED CARBIDE TIPPED MICROBORE INSERTS- 3/4"20 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of Assorted of Carbide Tipped Microbore Inserts in good condition. Features: Carbide Cutting Tips. Specifications: Size: 3/4"20. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF ASSORTED CARBIDE TIPPED MICROBORE INSERTS- 3/4"20 Reliable Tool Inc. c 2011 | Powered by
|
|
|
STARRETT 1 INCH MICROMETER , .0001 , RATCHET THIMBLE , CARBIDE TIPPED , P/N 230
UP FOR AUCTION IS A STARRETT 1 INCH MICROMETER. THIS MEASURES IN.0001, THIS HAS A RATCHET THIMBLE, THIS HAS CARBIDE FACED ANVILS. THIS IS STARRETT P/N 230, THIS IS IN GOOD CONDITION WILL DO MY BEST TO COMBINE SHIPPING, FEEL FREE TO EMAIL ME AT WITH ANY QUESTIONS.
|
|
|
KOMET DIHART CARBIDE TIPPED RAPID SET HEAD DSB Milling Cutter 83.055mm +.005
New/Unused Item No: N/A Diameter/Cut: 83.055 mm +.005 The rapid set head from DIHART ® ensure fast and reliable replacement of the cutter. The rapid set head tipped with carbide and DST can be fitted to all DIHART ® rapid set head holders. The longer service life reduces the tool changing frequency enormously.
|
|
|
1" Carbide Tipped Blade Hand Scraper - Machinist / Toolmaker
You are looking at a 1" Carbide Tipped Blade Hand Scraper. It looks custom-made. In good condition. I made 5 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking.
|
|
|
Milwaukee 4 Inch Steel Hawg 49-57-4000 Carbide Tipped Metal Boring Cutter
Milwaukee 49-57-4000 Steel Hawg 4-Inch Diameter 2-Inch Depth Threaded Shank Annular Cutter Other than surface rusting from storage the bit appears to be only lightly used. See pictures for details. Posted with
|
|
|
STARRETT No. 436 1" - 2" Micrometer w/ Wrench - Carbide Tipped-Newly Calibrated
A STARRETT No. 436 1" to 2" Carbide Tipped Micrometer with Wrench. Excellent condition.Newly Calibrated! Made in Athol. Mass. USA. The Mics you see pictured is what you are getting! WE OFFER COMBINED SHIPPING AND HAVE 1-2" MICS.2-3" MICS,VERNIERS,DIAL TEST GAGE.SO PLEASE Check out my! Be sure to add me to your! Thank You for Looking! f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-14022c134c3-0xfe-
|
|
|
Brown and Sharpe 3 pc micrometer set carbide tipped.
3 pc set. 0-1" 1-2" 2-3" Carbide tipped(no chips) 0001ths. friction knobs. Includes wood case, wrenches and standards. The empty space in the case is for the 4" mic that was sold separately. The tools have no rust. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-140239b6738-0x101-
|
|
|
1'' CARBIDE TIPPED MICROMETER (E-2-7-1-28)
E-2-7-1-28) USED 1' CARBIDE TIPPED MICROMETER. WORN.0005, SPINDLE OUT OF FLAT.001. MADE BY BROWN AND SHARPE TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER AUCTION CLOSE FOR PRICE OF TOOL ONLY. REASONABLE BEST OFFERS CONSIDERED. SHIPPING WILL BE COMBINED ON ITEMS. RETURNS ACCEPTED-BUYER MUST CONTACT SELLER BEFORE RETURNING-SELLING PRICE ONLY WILL BE REFUNDED-BUYER MUST PAY RETURN SHIPPING. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. PAYPAL PREFERRED BUT WE ACCEPT PAYPAL AND VISA. MASTERCARD, DISCOVER AND AMERICAN EXPRESS VIA OUR PROPAY ACCOUNT. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS.
|
|
|
Group unusual tipped engraving tools carbide ? & graver points gunsmith watch
Up for auction is a group of 19 total engraving tools. there is 11 engraving points and 8 not so regular engraving tools. the engraving points are in fine condition. I don't think they have ever been used. They are five sided shafts that come down to a very sharp point. Ten of the engraving points seem to be a complete set of graduated sizes and one engraving point is different in style and has a name of w t johnson. The 8 not so regular engraving toos have a owner applied tip on each one. I believe it is owner applied. And I think it is carbide tip. Three have nomes on them, grobet, and 2 are marked dick. germany. the otheres are unmarked. I don't know how they work or if they work. these are new to me. any information will be appreciated. Please see pictures for condition. ask questions buyer pays shipping and delivery confirmation ... moreusps priority mail. thanks for looking.
|
|
|
Lot 2 Bokum boring bars carbide tipped machinist gunsmith lathe toolmaker tools
1/4" shanks x 2 3/16" oal. 3/16" min. bore x 1/2" depth. Could be used for thread or groove relief or straight boring. Both tools need sharpening.
|
|
|
Lexington Cutter, 363024, Carbide Tipped, Tapered Length Drill Bit - USED - 4 ea
You are bidding on( 4) USED Lexington Cutter. 363024, Carbide Tipped, Tapered Length Drill Bit- USED P/N 363024. Size- 3/8" OAL- 6 3/4" Flute Length- 4 1/4" Point Angle- 118 degree. Made in USA FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 15-R-32. Powered by
|
|
|
VR/W - CARBIDE TIPPED - LOT of 12 - BR5 75 - Right Angle Turning Tool
VR/W- CARBIDE TIPPED- LOT of 12- BR5 75- Right Angle Turning Tool I will be listing some machine shop tools. Just had a fella retire and purchase some of the items. So check back from time to time as I get them listed. For the most part they are used or new but do show some dirt and surface scratches from sitting in the box in the shop for a few years. Shows some surface scratches. Dirt. They are each painted yellow on the stems, I dont know if this is how they come or the previous owner did it. They are stamped into each one, VR/W BR 5 75. Please check out my pics so you will know exactly what you are getting. BR5 = W 5/16- H 5/16- L 2 1/2- Nose Rad 1/64 This is a great item to add to your collection. Please email me with any questions. Winner to pay $6 for Flat Rate Priority shipping and it includes delivery confirmation. Anything that ... morewill fit in the envelope is no additional shipping charges. Same as the flat rate boxes if you purchase more than one lot we can box it that way for you. These rates above are for US ONLY! S hipping rate above is for shipping to a home or business address in the US only. Hawaii. PR, AK, APO, Canada, International countires, etc please submit country and Zip code for shipping cost. And these will be shipped out by USPS.COM, which is the US post office. Winner to pay with any Paypal payments ONLY! California residents must pay sales tax. Payment must be made within 3 days of close of auction. Thanks for looking and GOOD LUCK! COMBINE SHIPPING: You may also combine any of my other auctions to save money on shipping unless noted in the auction that it can't be combined. If I miss giving you a multiple item rate and you won more than one auction just give me an email and I will correct it and give you the discount. All or our items are packaged very well to survive the shipping process. We always try to ship the next business day after funds clear. In the unlikely event you are less than happy with your purchase from us. Please e-mail us prior to leaving negatory feedback. We
|
|
|
Carboloy - CARBIDE TIPPED - LOT of 10 - BL6 883 - Left Angle Turning Tool
Carboloy- CARBIDE TIPPED- LOT of 10- BL6 883- Left Angle Turning Tooll I will be listing some machine shop tools. Just had a fella retire and purchase some of the items. So check back from time to time as I get them listed. For the most part they are used or new but do show some dirt and surface scatches from sitting in the box in the shop for a few years. Shows some surface scratches. Dirt. They are each painted green on the stems, I dont know if this is how they come or the previous owner did it. They are stamped into each one, VR/W BL 6 883. Please check out my pics so you will know exactly what you are getting. BL6 = W 3/8- H 3/8- L 2 1/2- Nose Rad 1/64 883 = For use in Cast Iron and non-ferrous material This is a great item to add to your collection. Please email me with any questions. Winner to pay $6 for Flat Rate Priority shipping ... moreand it includes delivery confirmation. Anything that will fit in the envelope is no additional shipping charges. Same as the flat rate boxes if you purchase more than one lot we can box it that way for you. These rates above are for US ONLY! S hipping rate above is for shipping to a home or business address in the US only. Hawaii. PR, AK, APO, Canada, International countires, etc please submit country and Zip code for shipping cost. And these will be shipped out by USPS.COM, which is the US post office. Winner to pay with any Paypal payments ONLY! California residents must pay sales tax. Payment must be made within 3 days of close of auction. Thanks for looking and GOOD LUCK! COMBINE SHIPPING: You may also combine any of my other auctions to save money on shipping unless noted in the auction that it can't be combined. If I miss giving you a multiple item rate and you won more than one auction just give me an email and I will correct it and give you the discount. All or our items are packaged very well to survive the shipping process. We always try to ship the next business day after funds clear. In the unlikely event you are less than happy with your purchase from us. Pl
|
|
|
Klennameta & Carboloy CARBIDE TIPPED Tool Bits - LOT of 10 - 370 & K21 - TSE 10
Klennameta& Carboloy CARBIDE TIPPED Tool Bits- LOT of 10- 370& K21- TSE 10 I will be listing some machine shop tools. Just had a fella retire and purchase some of the items. So check back from time to time as I get them listed. For the most part they are used or new but do show some dirt and surface scratches from sitting in the box in the shop for a few years. Shows some surface scratches. Dirt. And some of them have indendtions or circles carved on them for some reason. And one of the Carboloy has been shorted for a project I guess. These are painted yellow on one side, dont know if thats how they normall come. They are stamped into each one, TSE 10 Carboloy 370 and TSE Klennameta K21. Please check out my pics so you will know exactly what you are getting. TSE 10 = Sq Size 5/8" OAL 3" 370 = For General purpose Steel This ... moreis a great item to add to your collection. Please email me with any questions. Winner to pay $6 for Flat Rate Priority shipping and it includes delivery confirmation. Anything that will fit in the envelope is no additional shipping charges. Same as the flat rate boxes if you purchase more than one lot we can box it that way for you. These rates above are for US ONLY! S hipping rate above is for shipping to a home or business address in the US only. Hawaii. PR, AK, APO, Canada, International countires, etc please submit country and Zip code for shipping cost. And these will be shipped out by USPS.COM, which is the US post office. Winner to pay with any Paypal payments ONLY! California residents must pay sales tax. Payment must be made within 3 days of close of auction. Thanks for looking and GOOD LUCK! COMBINE SHIPPING: You may also combine any of my other auctions to save money on shipping unless noted in the auction that it can't be combined. If I miss giving you a multiple item rate and you won more than one auction just give me an email and I will correct it and give you the discount. All or our items are packaged very well to survive the shipping process. We always try
|
|
|
VR/W - CARBIDE TIPPED - LOT of 12 - BR5 2A5 - Right Angle Turning Tool
VR/W- CARBIDE TIPPED- LOT of 12- BR5 2A5- Right Angle Turning Tool will be listing some machine shop tools. Just had a fella retire and purchase some of the items. So check back from time to time as I get them listed. For the most part they are used or new but do show some dirt and surface scratches from sitting in the box in the shop for a few years. Shows some surface scratches. Dirt. They are each painted green on the stems and the tips, I dont know if this is how they come or the previous owner did it.They are stamped into each one, VR/W BR 5 2A5. Please check out my pics so you will know exactly what you are getting. BR5 = W 5/16- H 5/16- L 2 1/2- Nose Rad 1/64 This is a great item to add to your collection. Please email me with any questions. Winner to pay $6 for Flat Rate Priority shipping and it includes delivery confirmation. Anything ... morethat will fit in the envelope is no additional shipping charges. Same as the flat rate boxes if you purchase more than one lot we can box it that way for you. These rates above are for US ONLY! S hipping rate above is for shipping to a home or business address in the US only. Hawaii. PR, AK, APO, Canada, International countires, etc please submit country and Zip code for shipping cost. And these will be shipped out by USPS.COM, which is the US post office. Winner to pay with any Paypal payments ONLY! California residents must pay sales tax. Payment must be made within 3 days of close of auction. Thanks for looking and GOOD LUCK! COMBINE SHIPPING: You may also combine any of my other auctions to save money on shipping unless noted in the auction that it can't be combined. If I miss giving you a multiple item rate and you won more than one auction just give me an email and I will correct it and give you the discount. All or our items are packaged very well to survive the shipping process. We always try to ship the next business day after funds clear. In the unlikely event you are less than happy with your purchase from us. Please e-mail us prior to leaving negatory fe
|
|
|
Carboloy - CARBIDE TIPPED LOT of 12 - BL6 883 - Left Angle Turning Tool
Carboloy- CARBIDE TIPPED LOT of 12- BL6 883- Left Angle Turning Tool I will be listing some machine shop tools. Just had a fella retire and purchase some of the items. So check back from time to time as I get them listed. For the most part they are used or new but do show some dirt and surface scatches from sitting in the box in the shop for a few years Shows some surface scratches. Dirt. They are each painted green on the stems, I dont know if this is how they come or the previous owner did it. They are stamped into each one, VR/W BL 6 883. Please check out my pics so you will know exactly what you are getting. BL6 = W 3/8- H 3/8- L 2 1/2- Nose Rad 1/64 883 = For use in Cast Iron and non-ferrous material This is a great item to add to your collection. Please email me with any questions. Winner to pay $6 for Flat Rate Priority shipping and ... moreit includes delivery confirmation. Anything that will fit in the envelope is no additional shipping charges. Same as the flat rate boxes if you purchase more than one lot we can box it that way for you. These rates above are for US ONLY! S hipping rate above is for shipping to a home or business address in the US only. Hawaii. PR, AK, APO, Canada, International countires, etc please submit country and Zip code for shipping cost. And these will be shipped out by USPS.COM, which is the US post office. Winner to pay with any Paypal payments ONLY! California residents must pay sales tax. Payment must be made within 3 days of close of auction. Thanks for looking and GOOD LUCK! COMBINE SHIPPING: You may also combine any of my other auctions to save money on shipping unless noted in the auction that it can't be combined. If I miss giving you a multiple item rate and you won more than one auction just give me an email and I will correct it and give you the discount. All or our items are packaged very well to survive the shipping process. We always try to ship the next business day after funds clear. In the unlikely event you are less than happy with your purchase from us. Please
|
|
|
CARBOLOY - CARBIDE TIPPED Tool Bits - LOT of 10 - 350 FL8 - RED
CARBOLOY- CARBIDE TIPPED Tool Bits- LOT of 10- 350 FL8- RED I will be listing some machine shop tools. Just had a fella retire and purchase some of the items. So check back from time to time as I get them listed. For the most part they are used or new but do show some dirt and surface scratches from sitting in the box in the shop for a few years. Shows some surface scratches. Dirt. These are painted red on one side, dont know if thats how they normall come. They are stamped into each one, Carboloy 350 FL8. Please check out my pics so you will know exactly what you are getting. FL8 = Sq Size 1/2- OAL 3 1/2 350 = For Cabron and Alloy Steel This is a great item to add to your collection. Please email me with any questions. Winner to pay $6 for Flat Rate Priority shipping and it includes delivery confirmation. Anything that will fit in the envelope ... moreis no additional shipping charges. Same as the flat rate boxes if you purchase more than one lot we can box it that way for you. These rates above are for US ONLY! S hipping rate above is for shipping to a home or business address in the US only. Hawaii. PR, AK, APO, Canada, International countires, etc please submit country and Zip code for shipping cost. And these will be shipped out by USPS.COM, which is the US post office. Winner to pay with any Paypal payments ONLY! California residents must pay sales tax. Payment must be made within 3 days of close of auction. Thanks for looking and GOOD LUCK! COMBINE SHIPPING: You may also combine any of my other auctions to save money on shipping unless noted in the auction that it can't be combined. If I miss giving you a multiple item rate and you won more than one auction just give me an email and I will correct it and give you the discount. All or our items are packaged very well to survive the shipping process. We always try to ship the next business day after funds clear. In the unlikely event you are less than happy with your purchase from us. Please e-mail us prior to leaving negatory feedback. We cannot offer a solut
|
|
|
1 LARGE CARBIDE TIPPED CUTTER Along with Carboloy Cutters.NOS?
Offered is a 1 LARGE CARBIDE TIPPED CUTTER Along with Carboloy Cutters.NOS? Because of Ebay’s Stricted Selling Policy I ask you the customer to please leave me a 5 star rating. If you feel that I have not Deserved a 5 Star Rating PLEASE contact me first before leaving feedback. I can make things right as I am a very customer orientated seller. Terms and Info: ASK QUESTIONS Before you Bid. BE SURE TO VIEW all PICTURES. Refunds granted only when there is a GROSS error in my description. You must respond within 3 days of receiving item and ship it back in 7 days with delivery confirmation. Buyer pays return shipping. Items are Sold. AS FOUND. I do not even like cleaning them up, I am afraid that I may do it wrong. I will combine items won to save on shipping and handling fees. Handling fees are calculated into shipping. Covers bubble wrap.Padded ... moreenvelopes etc. I want to protect your items. Normal handling time ONE DAY. I ship daily. But do not have control over how long the carrier takes to deliver your item when using economy shipping. So Don't hold it against me when leaving feedback. High Bidder pays through PayPal. In US funds. Return Policy…We have a very good return policy. We just asked that you the customer follow some simple rules. Most items are insured through the post office. If you receive an item that is damaged due to the post office being rough with the package please let us know immediately. You must keep the original package and the materials. This is because the post office may need to inspect. We will file the claim and normally get a response back in seven business days. International Buyers– Please Note: I offer 2 different shipping options for you to choose from. FIRST CLASS MAIL. By choosing this option you agree to hold me harmless on any late or lost mail. United States Postal Office can only track a package up to the point that customs receive it. Priority Mail. By choosing this option your package not only gets to you faster but it can be tracked all the way to the des
|
|
|
ASSORTMENT OF PRECISION CARBIDE-TIPPED REAMERS - .440 TO .610"
aims ASSORTMENT OF PRECISION CARBIDE-TIPPED REAMERS- 440 TO.610" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an assortment of carbide tipped reamers in good condition. Specifications: Reamer Sizes Range: 440" to.610" Shanks: Straight. Lengths of Cut Range: 2" to 4-1/2" Overall Lengths: 6-1/2" to 9" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF PRECISION CARBIDE-TIPPED REAMERS- 440 TO.610" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Assortment of Carbide Tipped Taper Shank Drill Bits Size Range 7/32" - 25/32"
Assortment of Carbide Tipped Taper Shank Drill Bits Size Range 7/32" 25/32" Quantity Available: 1 Shipping Weight: 10 lb(AEC 109 2.2.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing ... morewe have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order.
|
|
|
USED MARKEN BRAND STRAIGHT SHANK CARBIDE TIPPED CORE DRILL 1.544"+/-
LISTING IS FOR A USED STRAIGHT SHANK CORE DRILL BRAND- MARKEN SIZE- 1.544"+/ FLUTE LENGTH- 4.50" OAL- 10.50" SHANK- 1.50" CONDITION- GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.5
|
|
|
ASSORTMENT OF CLEVELAND AND OTHERS PRECISION CARBIDE-TIPPED REAMERS
aims ASSORTMENT OF CLEVELAND AND OTHERS PRECISION CARBIDE-TIPPED REAMERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an assortment of Carbide Tipped Reamers in good condition. Specifications: Diameters: 750" to 1.125" Shanks: Straight. Lengths of Cut: 1-1/2" to 3" Overall Lengths: 10" to 11" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF CLEVELAND AND OTHERS PRECISION CARBIDE-TIPPED REAMERS Reliable Tool Inc. c 2011 | Powered by;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14031842909-0x105-
|
|
|
Machinist Tools Brown & Sharpe No.2 0-1" Micrometer with Case; Carbide tipped
This is a nice Brown and Sharpe No.2 0-1" Micrometer with microspanner and wooden case. It is carbide tipped. This micrometer is used but still in good working condition. Thank you for your time. Please email with questions and have a wonderful day.
|
|
|
SWISS!! BROWN & SHARPE 1" - 2" CARBIDE TIPPED OUTSIDE MICROMETER - .0001" GRADS.
aims SWISS! BROWN& SHARPE 1" 2" CARBIDE TIPPED OUTSIDE MICROMETER- 0001" GRADS. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Swiss made by Brown& Sharpe. This is a Carbide Tipped Outside Micrometer in good condition. Model# 599-2-31 Features: Spindle-Lock. Enamel Finish. Specifications: Range: 1" to 2" End Diameters: 250" Graduations: 0001" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWISS! BROWN& SHARPE 1" 2" CARBIDE TIPPED OUTSIDE MICROMETER- 0001" GRADS. ... moreSWISS! BROWN& SHARPE 1" 2" CARBIDE TIPPED OUTSIDE MICROMETER- 0001" GRADS. Reliable Tool Inc. c 2011 | Powered by
|
|
|
Royal 11531 Mt4 Carbide Tipped CNC Dead Center Lathe Machinist Tool
See pics of actual item great dead center with a carbide tip used lightly Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1403281f51e-0x104-
|
|
|
Eldorado .4820 x 22" Carbide Tipped Gun Drill
Eldorado.4820 x 22" Carbide Tipped Gun Drill Single Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4790 x 36" Carbide Tipped Gun Drill
Eldorado.4790 x 36" Carbide Tipped Gun Drill Single Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4724 x 28.38" Carbide Tipped Gun Drill
Eldorado.4724 x 28.38" Carbide Tipped Gun Drill Single Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4687 x 48" Carbide Tipped Gun Drill Shank 1.25
Eldorado.4687 x 48" Carbide Tipped Gun Drill Single Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4440 x 42" Carbide Tipped Gun Drill
Eldorado.4440 x 42" Carbide Tipped Gun Drill Single Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4430 x 48" Carbide Tipped Gun Drill
Eldorado.4430 x 48" Carbide Tipped Gun Drill Single Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4375 x 48" Carbide Tipped Gun Drill
Eldorado.4375 x 48" Carbide Tipped Gun Drill Single Flute 0.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4220 x 28" Carbide Tipped Gun Drill
Eldorado.4220 x 28" Carbide Tipped Gun Drill Single Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4219 x 62" Carbide Tipped Gun Drill
Eldorado.4219 x 62" Carbide Tipped Gun Drill Single Flute 1.0" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .4062 x 28" Carbide Tipped Gun Drill Shank 1.25
Eldorado.4062 x 28" Carbide Tipped Gun Drill Single Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
ASSORTMENT OF CARBOLOY AND OTHERS CARBIDE-TIPPED TOOL BITS
aims ASSORTMENT OF CARBOLOY AND OTHERS CARBIDE-TIPPED TOOL BITS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Carboloy and others This is a Lot of Carbide Tipped Tool Bits in good condition. For General purpose turning. Facing and boring. Specifications: Tip Width: 1/4" Shank Range: 3/4" to 1-1/2" Overall Lengths Range: 5 to 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF CARBOLOY AND OTHERS CARBIDE-TIPPED TOOL BITS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Assortment of 1/2" x 1/2" carbide tipped bits, Very nice lot
Some real top quality stuff in this mix and a bunch of good stuff overall. How about one dollar each and I will get the freight on it. Free Shipping) 45 pieces. Thanks for looking and good luck.
|
|
|
3/4 & 5/8 Carbide tipped Square Bits, Lathe
Some new and some used. I have used coins to indicate sizes. The pennies are 5/8 x 5/8 and all 5 are new. Nickels are 1/2 x 1" and 5 of them also. Dimes are 3/4 x 3/4 and there are 19 of the for a total of 29 pieces. A buck and a half each and five for shipping equals Fifty Dollars in your mail box. A lot of new stuff here. This is a great buy. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1403ae6455c-0xfa-
|
|
|
23 Pieces, 5/8 x 5/8 Carbide Tipped Square Bits, Lathe
Still a lot of life left here and a pretty good mix. For a buck each and 2 for shipping to round it off. I will get these to you for a total of $25.00 and I think that is a deal or at least a great starting point. Thanks for looking.
|
|
|
Eldorado 1.1875 x 48" Carbide Tipped Gun Drill
Eldorado 1.1875 x 48" Carbide Tipped Gun Drill Single Flute 1.50" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado 1.250 x 84" Carbide Tipped Gun Drill
Eldorado 1.250 x 84" Carbide Tipped Gun Drill Single Flute 1.5000" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .9687 x 30" Carbide Tipped Gun Drill Shank 1.25"
Eldorado.9687 x 30" Carbide Tipped Gun Drill Single Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5625 x 52" Carbide Tipped Gun Drill Shank 1.25
Eldorado.5625 x 52" Carbide Tipped Gun Drill Single Flute 1.0" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5625 x 48" Carbide Tipped Gun Drill Shank 1.25
Eldorado.5625 x 48" Carbide Tipped Gun Drill Single Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5469 x 75" Carbide Tipped Gun Drill
Eldorado.5469 x 75" Carbide Tipped Gun Drill Single Flute 1.0" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5320 x 22" Carbide Tipped Gun Drill
Eldorado.5320 x 22" Carbide Tipped Gun Drill Single Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5312 x 72" Carbide Tipped Gun Drill
Eldorado.5312 x 72" Carbide Tipped Gun Drill Single Flute 1.0" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5300 x 22" Carbide Tipped Gun Drill
Eldorado.5200 x 22" Carbide Tipped Gun Drill Single Flute 0.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5220 x 22" Carbide Tipped Gun Drill
Eldorado.5220 x 22" Carbide Tipped Gun Drill Single Flute 0.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5156 x 48" Carbide Tipped Gun Drill
Eldorado.5156 x 48" Carbide Tipped Gun Drill S ingle Flute 1.0" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-1403bd8e938-0x100-
|
|
|
Eldorado .5156 x 59" Carbide Tipped Gun Drill
Eldorado.5156 x 59" Carbide Tipped Gun Drill S ingle Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5000 x 48" Carbide Tipped Gun Drill Shank 1.25
Eldorado.5000 x 48" Carbide Tipped Gun Drill S ingle Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5000 x 68" Carbide Tipped Gun Drill
Eldorado.5000 x 68" Carbide Tipped Gun Drill S ingle Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5000 x 65" Carbide Tipped Gun Drill
Eldorado.5000 x 65" Carbide Tipped Gun Drill S ingle Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5000 x 56" Carbide Tipped Gun Drill
Eldorado.5000 x 56" Carbide Tipped Gun Drill S ingle Flute 1.25" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|
|
Eldorado .5000 x 41.5" Carbide Tipped Gun Drill
Eldorado.5000 x 41.5" Carbide Tipped Gun Drill S ingle Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-1403bd8e969-0xf3-
|
|
|
Eldorado .5000 x 30" Carbide Tipped Gun Drill Shank .750
Eldorado.5000 x 30" Carbide Tipped Gun Drill S ingle Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
|
|