In 
 
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
$
288.99
Buy It Now
Free Shipping
Condition: New
Location: Pooler, United States
Built-in pre flow function, can isolate the air, arc smoothly, weld more beautiful. TIG Torch & Plasma Torch. Locate the Ground Clamp with Cable to the ... morePositive Connector (+) on the Welder. Locate the Ground Clamp with Cable to the Positive Connector (-) on the Welder.
$
281.51
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
【HIGH-QUALITY WELDER】The tig welder adopts advanced technology and high-quality electronic parts, which help improve welding efficiency. It with hot start, ... moreeasy arc starting, stable current, low spatter, no sticking, and good shaping.
$
87.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Manufacturer: YesRight. SMART IGBT INVERTER TECHNOLOGY: Hand Held Welder utilizes IGBT inverter technology, which improves the welder's current stability ... moreand energy efficiency. Hand Held Welder utilizes IGBT inverter technology, which improves the welder's current stability and energy efficiency.
$
229.99
Buy It Now
Free Shipping
Condition: New
Location: Walton, United States
5-PIN FOOT PEDAL INTERFACE.
$
76.60
Buy It Now
Free Shipping
Condition: New
Location: China
Built-in pre flow function, can isolate the air, arc smoothly, weld more beautiful. TIG Torch & Plasma Torch. Locate the Ground Clamp with Cable to the ... morePositive Connector (+) on the Welder. Locate the Ground Clamp with Cable to the Positive Connector (-) on the Welder.
$
199.98
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
HF TIG Welder 3 in 1 TIG ARC Clean Welding Machine 210 Amp w/ Pulse & Torch - YouTube. High-performing 3-in-1 TIG Welder: Our welder machine has HF TIG, ... moreARC, and a clean mode. The arc success rate of the TIG is 100%.
$
52.99
Buy It Now
Free Shipping
Condition: New
Location: United States
HZXVOGEN 200Amp MIG Welder 2 in 1 Flux MIG/Solid Wire/MMA/ARC/Stick Welder 110V. MIG Gasless Welder : HZXVOGEN Gasless HVM200(flux cored wire) : Accepts ... more1kg flux core wires and 0.8/1.0mm solid wires to weld on 0.8/1.0mm plate thickness for carbon steel stainless steel/mild steel.
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: United States
Tig Welder 200 Amp Welders Tig/Stick 2 in 1 TIG-200 Welder Machine High Frequency 220V Digital Tig Welding Equipment IGBT Inverter Tig Machine. 💯 Delivery ... moreContent : ✔️1 X Power source TIG welder TIG200 ✔️1 X Tig Welding torch WP-17 ✔️1 X cable +300A Earth clamp ✔️1 X cable +300A Electrode holder Buy now and get a free set of TIG consumables.
$
263.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Real 200A Output: Stable square wave AC/DC TIG welder with 5-200AMP AC/20-200AMP DC TIG current output. Why choose HZXVOGEN 110V/220V 200Amp TIG Welder ... moreMachine?. 1X Tig Welder AC DC. Rated Input Power: TIG(5.8KVA) MMA(7.9KVA).
$
146.27
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Inverter technology: IGBT. Multi-process TIG Welder: The HITBOX HBT2000P cold tig welding machine can perform COLD TIG/ PULSE TIG / DC TIG/ STICK welding ... moreprocesses. - Duty Cycle:60% @200A. HF torch start supports 2T and 4T welding to suit different welding jobs.
$
309.99
Buy It Now
$9.99 Shipping
Condition: New
Location: Chino, United States
HITBOX 200A 220V Aluminum Tig Welder AC/DC Pulse HF MMA/Stick Tig Welding Machine IGBT. - Inverter technology: IGBT. The 220V AC/DC pulse tig welder can ... moreweld steel and aluminum sheets. Equipped with AC Square Wave TIG, AC pulse TIG, DC TIG, DC Pulse TIG, Stick, and argon arc spot welding (DC, pulse or AC).
$
57.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
【Portable Handheld Welder】 TRQWH 200 Amp Portable Handheld Arc Welding Machine is suitable for 1/16″- 1/8″ (1.6-3.2mm) welding rods, which can be switched ... moreat will. 【110V & 20-200A Adjustable Output】 This MMA welder is suitable for all sizes of welding rods 1/16", 5/64", 3/32", 1/8".
$
249.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Stick/MMA (Hot start, Arc-force, Anti-stick) welding capability for outdoor work or thicker materials. Powerful and easy-to-handle, perfect for entry ... morelevel welders. SAFETY & FAN WORKS as NEEDED: Cooling fan system that runs only when the welder machine needed so no constant buzzing sounds.
$
189.99
Buy It Now
Free Shipping
Condition: New
Location: Walton, United States
TIG DC & TIG DC with Pulse. Spot Welding(TIG Welding). Foot Pedal(TIG Welding). DC TIG(SPOT). DC TIG(2T/4T). Pulsed TIG(SPOT). Pulsed TIG(2T/4T).
$
364.31
Buy It Now
$5.00 Shipping
Condition: New
Location: Bordentown, United States
HITBOX 200Amp Pulse Tig AC DC Stick/MMA HF TIG Welder 220V TIG Welding Machine. Equipped with AC Square Wave TIG, AC pulse TIG, DC TIG, DC Pulse TIG, ... moreStick, and argon arc spot welding (DC, pulse or AC).
$
289.99
Buy It Now
Free Shipping
Condition: New
Location: Bordentown, United States
Energy saving: HZXVOGEN HVT250P ACDC uses high-frequency converter technology, which saves energy and ensures constant and stable operation. 200A Aluminum ... moreAC/DC Pulse TIG welder 110V 220V ARC TIG IGBT welding machine.
$
117.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
(The maximum welding thickness is 0.1"/3 mm.). Whether you are a hobbyist, maker, small fabricator, or craftsman, choose the VEVOR TIG welder and explore ... moreyour creativity. VEVOR HF TIG Welder 3 in 1 TIG ARC IGBT Clean Welding Machine 210A w/Torch.
$
99.00
Buy It Now
$28.00 Shipping
Condition: Used
Location: Kansas City, United States
He gave up trying after an hour and i think one of the things he had problems with was he tried to use C25 gas from our mig.
$
223.99
Buy It Now
$49.99 Shipping
Condition: New
Location: Chino, United States
HITBOX 200Amp 220V Aluminium Pulse AC DC HF Tig Welder ARC TIG Welding Machine. The 220V AC/DC pulse tig welder can weld steel and aluminum sheets. Equipped ... morewith AC Square Wave TIG, AC pulse TIG, DC TIG, DC Pulse TIG, Stick, and argon arc spot welding (DC, pulse or AC).
$
50.00
5d 21h 2m 34s
0 bids
$48.34 Shipping
Condition: Used
Location: Lancaster, United States
Hynade 225A DC Inverter TIG Welder. Unit still performs perfectly and is a powerhouse for its size. I was genuinely impressed with this machine when I ... morebought it. It also Stick welds amazing. I forgot to take a pic but Ill include the stinger with it as well for stick rods.
$
97.49
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Why Choose VEVOR?. 3 IN 1 MIG TIG MMA Welder Machine. Multifunction 3-in-1 MIG/TIG/MMA professional combo welder, capable of welding up to alloy, mild ... moresteel, weld steel, stainless steel, copper, and cast iron.
$
60.38
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
1.4 IN 1 MIG Welding Machine 2.Overload Safety Protection 3.Arc force hot start and VRD adjustment to help you start work quickly 4.Package include:1x ... moreMig Welder +1x Mig Torch +1x Flux Core Wire +1x Electrode Holder +1x Earth Clamp 5.Notice: Spool Gun and Tig Torch are not included.
$
89.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
【Portable Handheld Welder】 TRQWH 120 Amp Portable Handheld Arc Welding Machine is suitable for 1/16″- 1/8″ (1.6-3.2mm) welding rods, which can be switched ... moreat will. 【IGBT Inverter Technology】 Using advanced IGBT inverter technology and built-in hot start function, makes the welder arc start quickly, ensures stable arc, less spatter, stable current, very safe to use and smooth welded joints.
$
199.95
Buy It Now
Free Shipping
Condition: New
Location: Chatsworth, United States
We are always more than happy to help or make any issue correct. New / Open Box.
$
60.49
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Advanced IGBT technology, ensures a stable and large power welding work. High frequency inverter, features quick arcing and less welding splash. Inverter ... moreenergy saving, first-class energy saving.
$
31.65
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
HITBOX TIG Welding Torch WP17V Welder Torch 140A SR-17V TIG Welder Gun Lift TIG. 150A WP17V -FV 17 TIG Torch 4m GTAW Air Cooling Flexible Neck Gas Valve ... moreTig Welding Gun. ★ If you use the LIFT TIG function for MIG machines, you do not need to use the flare switch and 2-pole.
$
219.99
Buy It Now
$14.99 Shipping
Condition: New
Location: Bell Gardens, United States
Inverter technology: IGBT. Equipped with AC Square Wave TIG, AC pulse TIG, DC TIG, DC Pulse TIG, Stick, and argon arc spot welding (DC, pulse or AC). ... moreThe 220V AC/DC pulse tig welder can weld steel and aluminum sheets.
$
118.75
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
MULTIPURPOSE WELDER WITH QUALITY ACCESSORIES – 110V 220V 200A with MIG/ARC/LIFT TIG gas gasless multi function 110V 220V DC inverter welder. HITBOX MIG ... moreWelder 200A Dual Volt 110V 220V IGBT Inverter Flux Core Wire Gasless/Gas 4 in 1 Welding Machine.
$
249.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Output Current Under 110V(MIG): 30-160A. 1 10ft MIG Welding Torch. TIG Mode : Locate the Ground Clamp with Cable and connect the plug on the cable end ... moreto the Positive Connector (+) on the Welder. Great Welding Performance: Smooth arc action and High feedability, you will love the less splatter when do your welding project.
$
339.99
Buy It Now
$39.99 Shipping
Condition: New
Location: Ontario, United States
✅【HIGH-QUALITY WELDER】The tig welder adopts advanced technology and high-quality electronic parts, which help improve welding efficiency. It with hot ... morestart, easy arc starting, stable current, low spatter, no sticking, and good shaping.
$
139.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
ARCCA PTAIN Stick Welder, 200A ARC/lift TIG Welding Machine with Synergic, IGBT Inverter 110V/220V Digital LED Display Portable MMA Welder with Hot Start, ... moreArc force and Anti-Stick. It features adjustable hot start and arc force, easy to strike an arc, provide smoother welding and lower the probability of arc breaking; Automatic anti-stick avoids electrode sticking in the puddle.
$
279.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Real 200A Output: Stable square wave AC/DC TIG welder with 5-200AMP AC/20-200AMP DC TIG current output. Why choose HZXVOGEN 110V/220V 200Amp TIG Welder ... moreMachine?. 1X Tig Welder AC DC. Rated Input Power: TIG(5.8KVA) MMA(7.9KVA).
$
55.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
【Smart LED for easy operation】 - The HITBOX MINI ARC200D is very easy to use and can be used for practice and small welding operations. Easy to operate, ... moresafe and convenient, especially suitable for beginners.
$
55.99
Buy It Now
Free Shipping
Condition: New
Location: Bordentown, United States
HITBOX 110V 220V Mini 2 IN 1 Lift TIG ARC Welder Electric Welding Machine Compact Welder IGBT Digital Display LCD Hot Start ARC Force Welder for Welding ... moreWorking and Electric Working. 【Smart LED for easy operation】 - The HITBOX MINI ARC200D is very easy to use and can be used for practice and small welding operations.
$
80.00
2d 0h 13m 4s
0 bids
$95.25 Shipping
Condition: Used
Location: Clarksburg, United States
This inverter welder is perfect for those looking to weld steel materials using the stick/TIG welding process. Its AC polarity ensures a smooth and efficient ... morewelding experience. This welder is compatible with both 110V and 220V outlets, making it versatile and easy to use in a variety of settings.
$
210.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Hillsville, United States
This YESWELDER Pulse 205Amp TIG Welder is the perfect addition to any welding shop. With its 3-in-1 design, it can handle STICK, DC TIG, and PULSE TIG ... morewelding processes, making it versatile and efficient. The welder is made in China and operates on dual voltage, 110V and 220V, making it suitable for a wide range of applications. The welder is ideal for use in TIG welding, thanks to its precision and ease of use. It comes equipped with a range of features, including polarity DC, making it perfect for welding on a range of metals. Whether you're a professional or a DIY enthusiast, this welder is a great choice.
$
79.99
Buy It Now
Free Shipping
Condition: Used
Location: United States
Tig Welder 200 Amp Welders Tig/Stick 2 in 1 TIG-200 Welder Machine High Frequency 220V Digital Tig Welding Equipment IGBT Inverter Tig Machine. 💯 Delivery ... moreContent : ✔️1 X Power source TIG welder TIG200 ✔️1 X Tig Welding torch WP-17 ✔️1 X cable +300A Earth clamp ✔️1 X cable +300A Electrode holder Buy now and get a free set of TIG consumables.
$
52.99
Buy It Now
Free Shipping
Condition: New
Location: Bordentown, United States
HITBOX 110V 220V Mini 2 IN 1 Lift TIG ARC Welder Electric Welding Machine Compact Welder IGBT Digital Display LCD Hot Start ARC Force Welder for Welding ... moreWorking and Electric Working. 【Smart LED for easy operation】 - The HITBOX MINI ARC200D is very easy to use and can be used for practice and small welding operations.
$
82.79
Buy It Now
Free Shipping
Condition: New
Location: United States
220V Electric Welder Hand Held Welding Machine Kit 4600W Digital Arc Welder Tool. 1 Hand-held Welding Machine. Duty Cycle at 40℃/104℉: 20%. Output Current: ... more20-120A ((1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A). ).
$
321.98
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
【HIGH-QUALITY WELDER】The tig welder adopts advanced technology and high-quality electronic parts, which help improve welding efficiency. It with hot start, ... moreeasy arc starting, stable current, low spatter, no sticking, and good shaping.
$
89.99
Buy It Now
Free Shipping
Condition: New
Location: Walton, United States
1/8"(3.2mm):101~140A(110&220V) 5/32"(4mm):140A(110V) /140~200A(220V). Connect the Work Clamp to the Negative Connector (–) on the Welder. Connect the ... moreWork Clamp to the Negative Connector (+) on the Welder.
$
49.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
【HOT START AND ARC FORCE】- Small welder machine with arc starting technology. Fits welding rods: E7018/E6013. Electrode size 1.0-3.2mm. The arc welder ... moreworks with material thickness up to 5mm. 【Portable Design and Safe】- The arc welder is compact and light weight.
$
124.99
Buy It Now
Free Shipping
Condition: New
Location: Walton, United States
IGBT Technology. Stick Welder 205A pro. 220V to 110V Adapter (AC power source only). More stable arc, Ideal performance for welding thin workpieces. With ... morea simple 110/220V adapter, it could be plugged dedicated 220V outlet for more power.
$
127.50
1d 1h 57m 40s
24 bids
$74.51 Shipping
Condition: Used
Location: Duncan, United States
Please read details before bidding 1- We want positive feedback. 2- Please contact us before leaving negative/neutral feedback. We will always do what ... moreever we can to make every buyer a happy buyer. 3- You have 10 days money back guaranteed and real person customer services. 4- After 10 days. The sale is FINAL( no exception) 5- No return. No refund, if negative/neutral feedback given without contacting the seller. 6- Bidder with"0" feedback must contact seller before placing a bid. If not your bid will be canceled without notice. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return.I do my very best to describe items to the best of my ability and send them out ASAP.I will always try my best to your shopping experience a pleasant one.I will leave feedback as soon as feedback is left for me! DESCRIPTION: YOU ARE LOOKING AT A Miller Electric Maxstar 91 DC Inverter Arc/Tig welder with Snap Start II IN GOOD WORKING CONDITION. AUCTION INCLUDED: Everything as seen on the pictures. No more or no less(actual pi c tures) FEATURES: Miller Maxstar 91 115 Volt 19.5 Amps 2.3 KW 60 Hz Single Phase 14 Volt Output 90 Amps Output 20% Duty Cycle 95 Max OCV Miller Snap Start II 115/230 Volt(set at 115 Volt) 0.5/0.3 Amps 60 Hz Single Phase Preflow and Postflow Timer 14 Pin Remote Receptacle The Hi Freq starter get its power from the welder so you only need one 115 Volt 20 amp power outlet SHIPPING COST: 1- International buyer. Please contact the seller for the shipping cost 2- Package will ship without insured unless buyer pays shipping insurance. 3- Seller is not responsible for any circumstances. If the package is damaged in shipping, lost packages, after the item is shipped. a) Seller will provide the shipping tracking number(if shipped within USA) b) Seller will only provide Customs Declaration number(if shipped outside the USA) c) Shipping rates applies to the Lower 48 states only. Please ask all questions before you bid. Sorry. There are no local pick ups. ITEMS CAN NO
$
151.85
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
①Welding functions: Support for MIG gas, MIG mix, Flux cored/MIG gasless, Lift TIG, MMA. ②Clear display: The new digital LED panel display shows every ... moredetail of the weld clearly. ④Automatic wire feed function: quickly feeds the wire out of the gun, even to inaccessible interiors.
$
98.60
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Current: 120A. This welding machine kit provides versatility with support for lift TIG and stick welding, as well as gasless flux-cored wire and solid ... morewire. 1.2m grounding wire 1pcs. Enhanced Durability: Equipped with multiple safety features, this welding machine kit ensures personal safety and extends the machine's service life with its efficient cooling fan.
$
130.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Deer Park, United States
S7 Tig Welder, 200 Amp 110 & 220V Dual Voltage TIG #184. Shipped with USPS Ground Advantage.
$
498.00
Buy It Now
Free Shipping
Condition: Used
Location: Valparaiso, United States
All products are brand new. Not rebuilt,not reconditioned and carry a full manufactures warranty. Unless otherwise specified. We are an AUTHORIZED MILLER- ... moreHOBART- DISTRIBUTOR. We have been serving the welding industry for over 26 years. So buy with confidence! B& R Welding Supplies is family owned and operated. You can speak with a real person at any time for help in the application processes. LINCOLN INVERTEC V250-S STICK& TIG WELDER USED WELDER Invertec V250–S— this is an inverter–based constant current stick( SMAW) and DC TIG( GTAW) welding power source. Inverter technology provides a completely portable and lightweight power source which weighs less than 36 lbs(16.4 kg) A three position mode switch can produce a soft or crisp stick welding arc and a TIG arc. Optimised for touch start TIG welding. The touch start design permits the TIG welding arc to be established without high–frequency starting techniques. In all welding modes. The unit may be controlled remotely and the arc can be set precisely to suit the welding application when stick welding, due to the arc starting and arc force control. Variable hot start control produces a gentle start for thin gauge material or open gap weldments. Or a more powerful start for positive penetration on critical weldments or dirty/rusty steel. 208- 230& 380- 460 VOLTS, Invertec V250–S— this is an inverter–based constant current stick( SMAW) and DC TIG( GTAW) welding power source. Inverter technology provides a completely portable and lightweight power source which weighs less than 36 lbs(16.4 kg) A three position mode switch can produce a soft or crisp stick welding arc and a TIG arc. Optimised for touch start TIG welding. The touch start design permits the TIG welding arc to be established without high–frequency starting techniques. In all welding modes. The unit may be controlled remotely and the arc can be set precisely to suit the welding application when stick welding, due to the arc starting and arc force control. Variable hot sta
$
72.99
Buy It Now
Free Shipping
Condition: New
Location: United States
TOOLIOM Portable 135A Mini Stick Welder. High quality arc starting, reduce the probability of initial defects in the arc. Smooth arc on cellulose, make ... morewelding electrode welding smooth, not easy to break.
$
40.99
Buy It Now
$8.99 Shipping
Condition: New
Location: Bordentown, United States
【Smart LED for easy operation】 - The HITBOX MINI ARC200D is very easy to use and can be used for practice and small welding operations. Easy to operate, ... moresafe and convenient, especially suitable for beginners.
$
900.00
9d 21h 31m 36s
0 bids
$91.05 Shipping
Condition: Used
Location: New Castle, United States
All products are brand new. Not rebuilt,not reconditioned and carry a full manufactures warranty. Unless otherwise specified. We are an AUTHORIZED MILLER- ... moreHOBART- DISTRIBUTOR. We have been serving the welding industry for over 26 years. So buy with confidence! B& R Welding Supplies is family owned and operated. You can speak with a real person at any time for help in the application processes. Miller Dynasty 200 SD Part# 907099 Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line technology offering the most flexible AC/DC TIG Stick power supply in the welding industry. Features: Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc. And extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90% This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20- 250 Hz. provides control for a focused arc. Resulting in better directional control to help produce desired arc/weld bead characteristics. Fan-On-Demand cooling system only operates when needed. Auto-Line provides state-of-the-art flexibility by automatically connecting to 120- 460 VAC. Single or three phase power without removing the covers to relink the power source. Portable in the shop or at the job site- at 45 lb the unit is easily moved from location to location. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters. HF arc starting provides non-contact ar
$
128.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
ARCCA PTAIN Stick Welder, 200A ARC/lift TIG Welding Machine with Synergic, IGBT Inverter 110V/220V Digital LED Display Portable MMA Welder with Hot Start, ... moreArc force and Anti-Stick. It features adjustable hot start and arc force, easy to strike an arc, provide smoother welding and lower the probability of arc breaking; Automatic anti-stick avoids electrode sticking in the puddle.
$
839.99
Buy It Now
Free Shipping
Condition: New
Location: Pottstown, United States
Everything is included with this welder for doing excellent welding straight out of the box. 1/4"-thick welding capacity on 220VAC. Square-wave inverter ... morefor accurate aluminum welding.
$
319.99
Buy It Now
Free Shipping
Condition: New
Location: Pooler, United States
Built-in pre flow function, can isolate the air, arc smoothly, weld more beautiful. TIG Torch & Plasma Torch. Locate the Ground Clamp with Cable to the ... morePositive Connector (+) on the Welder. Locate the Ground Clamp with Cable to the Positive Connector (-) on the Welder.
$
95.99
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
⚡Powerful 110V Stick Welder for Efficient Welding! 🔧Multi-purpose Welder Item model number 110V Welding Machine. ⚙️Powerful Arc-force: Provides smoother ... morewelding, deeper penetration, and consistent welding current.
$
112.94
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification Model: ARC-120 Color: Black Material: Plastic Style: Modern Plug Voltage: 110V Rated Output Voltage: 24.8V Output Current: 20-120A ((1-Step=20A ... more/ 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A) Rated Input Power: 4.6KW Enclosure Protection Grade: IP21 Electrode: φ1.6-φ3.2 Power Factor: 0.76 Insulation Class: F Duty Cycle at 40℃/104℉: 20% Working Temperature: -10~40℃/-50~104℉ Efficiency: About 85% Power Type: Plug-in Plug: American Standard Net Weight: 2kg/4.41lbs Gross Weight: 2.4kg/5.29lbs Package Size: 25*20*10cm/9*7*3inch Toolbox Size: 37*25*12cm/14.6*9.9*4.7inch Suitable Welding Rod Diameter: 2.5mm/0.09inch Package Included 1* Hand-held Welding Machine 1* Clip 1* Steel Brush 1* Toolbox 1 Set* Protective Masks 1* English Manual.
$
99.99
Buy It Now
Free Shipping
Condition: New
Location: Prior Lake, United States
The Ironton Stick/TIG Welder is a 120V, 85–120 Amp unit that uses lightweight inverter technology for better arc starts and a more stable, reliable arc. ... moreLight weight of only 8.8 lbs. allows you to transport to your project rather than hauling your project to your machine. The digital display enables easier output setting than guessing. The infinite control knob allows continuous and fine output adjustment. This unit is a perfect choice for beginners doing home maintenance, repair and hobby work. This welder offers both stick and TIG welding processes capable of use on thin material such as stainless and aluminum. The built-in hot start, anti-sticking and arc force enable easy arc starting and perfect performance.
$
199.49
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Stick/MMA (Hot start, Arc-force, Anti-stick) welding capability for outdoor work or thicker materials. Powerful and easy-to-handle, perfect for entry ... morelevel welders.
$
89.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
【Portable Handheld Welder】 TRQWH 120 Amp Portable Handheld Arc Welding Machine is suitable for 1/16″- 1/8″ (1.6-3.2mm) welding rods, which can be switched ... moreat will. 【IGBT Inverter Technology】 Using advanced IGBT inverter technology and built-in hot start function, makes the welder arc start quickly, ensures stable arc, less spatter, stable current, very safe to use and smooth welded joints.
$
221.40
Buy It Now
$68.59 Shipping
Condition: New
Location: Chino, United States
Equipped with AC Square Wave TIG, AC pulse TIG, DC TIG, DC Pulse TIG, Stick, and argon arc spot welding (DC, pulse or AC). The 220V AC/DC pulse tig welder ... morecan weld steel and aluminum sheets. AC Square Wave and Pulse TIG.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
MILLER SYNCROWAVE 200 TIG WELDER
UP FOR AUCTION IS THIS PREVIOUSLY OWNED MILLER TIG WELDER. THIS IS THE SYNCROWAVE 200. THIS IS IN GOOD WORKING CONDITION. PLEASE SEE PICTURES ABOVE AS REFERENCE AND BELOW FOR PRODUCT INFORMATION. Features: Squarewave output with AC balance features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys. And helps eliminate tungsten spitting and arc rectification. Dual digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage. Allows for greater accuracy and repeatability in the welding procedure. Built-in Pulse Control enhances weld bead and puddle control for improved appearance and quality. Cable management system uses dual cable hangers and foot control storage conveniently attached to the power source side panels. Auto Postflow protects the weld end ... morezone and electrode by optimizing postflow time base on welding amperage. 115 Volt Auxiliary Power with convenient receptacle on front panel for cooling system or small tools. Syncro Start allows the operator to select Soft. Standard or Hot TIG HF starts to optimize the application according to tungsten diameter and material thickness. Input Power 1-Phase Power Rated Output 150 A at 26 V. 40% Duty Cycle Welding Amperage Range 5- 200 Amps Net Weight 238 lb(108 kg) THIS IS A LOCAL PICKUP ONLY FOR THIS AUCTION. PICKUP IS LOCATED AT OUR STORE IN LAPLACE. LOUISIANA THE ADDRESS IS FAST CASH PAWN 1036 W AIRLINE HIGHWAY(HWY 61) LAPLACE LA 70069. WE ARE LOCATED AT THE CORNER OF W AIRLINE HWY AND CAMBRIDGE. 5 DAY MONEY BACK GUARANTEE IF YOU ARE NOT SATISFIED FOR ANY REASON. RETURN FOR A FULL REFUND WITHIN 5 DAYS OF RECEIVING ITEM.I ALWAYS TRY TO SATISFY THE CUSTOMER!PLEASE USE CONTACT SELLER BUTTON FOR ANY QUESTIONS YOU MAY HAVE. THANK YOU AND HAPPY BIDDING!PLEASE PAY ALL INVOICES WITHIN 4 DAYS OF ANY ENDED ITEM IN YOUR INVOICE. I WILL NOT COMBINE ANY INVOICES EXCEEDING A 3 DAY PERIOD.ANY DISCOUNT IS VOID AND WILL BE REMOVED IF ANY INVOICE IS UNPAID AFTER 3 DAYS. THIS DOES NOT INCLUDE
MILLER MAXSTAR 300 DX 903576-01-1 DC STICK TIG INVERTER WELDING WELDER
WarnerSales Warner See all my listings: WarnerSales MILLER MAXSTAR 300 DX 903576-01-1 DC STICK TIG INVERTER WELDING WELDER Offered is a USED Miller Stick/Tig Welder. Model: Maxstar 300 DX. Stock No: 903576-01-1. Description: This is a 300 amp advanced TIG/ Stick DC inverter welder with 8 programmed memory(4 tig 4 Stick) Has pulsing settings for TIG and DIG settings for stick. Processes TIG(GTAW) Welding Pulsed TIG(GTAW-P) Welding with DX Stick(SMAW) Welding Input Power Requires 3- or 1-Phase Power Amperage Range 5– 300 A Rated Output: 250 A at 30 VDC. 60% Duty Cycle(3-Phase) 200 A at 28 VDC. 60% Duty Cycle(1-Phase) We took this welder to a Miller service center and had it checked for function. A problem was found and repaired. The input diode. Both capacitors, contactor with circuit card assembly, and interconnecting switch were replaced. ... moreIt is now in correct working condition. FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping cos
Welding Welder Weld Mask Mig Tig Arc Gas Equipment Training Course PDF on CD!!!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Welding Welder Weld Mask Mig Tig Arc Gas Equipment Training Course PDF on CD Description The PDF course contains the following information: Welding Training Course CD Training Manual 1- Welding Theory and Application(741 Pages) Chapter 1- Introduction Chapter 2- Safety Precautions in Welding Operations Chapter 3- Print Reading and Welding Symbols Chapter 4- Joint Design and Preparation Of Metals Chapter 5- Welding and Cutting Equipment Chapter 6- Welding Techniques Chapter 7- Metals Identification Chapter 8- Electrodes and Filler Metals Chapter 9- Maintenance Welding Operations Chapter 10- Arc Welding and Cutting Processes Chapter 11- Oxygen Fuel Gas Welding Procedures Chapter 12- Special Applications Chapter 13- Destructive and Non-Destructive Testing Appendices Training Manual ... more2- Welding Operations Part I(113 Pages) Electrodes Classification and Intended Uses Automotive Welding Processes Materials Identification Processes Methods of Destructive and Non Destructive Testing of Welds and Troubleshooting Procedures Types and Techniques of Joint Design and the Theory Training Manual 3- Welding Operations Part II(80 Pages) Inert Gas Welding Principles Equipment and Safety Precautions Gas Metal-Welding Principles Operations and Equipment Nomenclature Procedures for Troubleshooting Welding Training Manual 4- Welding Theory(52 Pages) Welding Symbols Welding Symbols on Shop Drawings Please Note You will receive a CD which contains the Book in PDF format. This means it can be viewed on your computer using the freely available Adobe Reader. The CD will be placed in a protective sleeve and will be packaged appropriately to allow us to deliver it via Royal Mail 2nd Class. The file is the entire book however it is just in an electronic format. This means you can print off any the pages in the book if needed. If you have any questions regarding the item please don’t hesitate to ask. Just contact us via the eBay messaging system. Payment PayP
Miller Coolmate 4 TIG Welder Water Cooler #042288
This cooler has been tested and functions perfectly. Coolmate™ 4 115 VAC For use with water-cooled torches rated up to 600 amps. Runs on 115 VAC. The best performer in its class. Tough molded polyethylene case with carrying handle. 4 gallon capacity.
Miller Syncrowave 351 TIG Welder AC/DC Water Cooled
This Syncrowave 351 Tig Welder is ready to weld and includes everything listed below. All you need to add is gas and tungsten! Call us at 404-736-6494 with any questions or to get a freightquote. Syncrowave 351 Complete Syncrowave 351 power source Miller Coolmate 3 Water Cooler RFC-14 Remote foot control 25 ft(7.6 m) Water-cooled TIG torch 25 ft(4.6 m) work lead w/clamp Gas hose Regulator/flowmeter Cable cover, Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) HF Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. features adjustable penetration and cleaning action while increasing arc stability on ... morevarious aluminum alloys. And helps eliminate tungsten spitting and arc rectification. Digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage. operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. start provides TIG arc starting without the use of high frequency. keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication, Maintenance and Repair, Light Manufacturing, Heavy Manufacturing, Aerospace, Shipbuilding, Tube and Pipe, Vocational, Specifications Input Power Requires 1-Phase Power, Runs on 230 or 460 Volt, Rated Output 350 A at 34 VAC. 40% Duty Cycle, 300 A at 32 VAC. 60% Duty Cycle, Welding Amperage Range 3- 400 Amps, Net Weight 496 lb(225 kg)
Jetline CS3-15Z Vertical coil splicer / Seam Welder w Ultima 150 Plasma TIG
Up for sale is a used Jetline CS3-15Z Plasma Welder/ Coil Splicer. This came to as from a Unisolar solar plant that was shut down several month back. This came from a line that was not yet in production, only in setup stage, it is in excelent condition with very light use. WE ALSO HAVE ANOTHER EXACT SAME COMPLETE BRAND NEW ONE, STILL IN THE CRATE IN ANOTHER LISTING. First photo shows New Welder that is still in the crate. All other photos below of exactly same welder that we have used. Please note there is no paypal on this item. Coil Splicer Model:CS3-15Z. Coil splicers are used to join coiled sheet together eliminating the need to stop a continuous line such as a tube/pipe mill or a stamping press or a roll forming line. Jetline coil splicers are typically based on our standard external seam welders or bench style seam welders. These splicers ... morecan be either stationary. Where the material continually passes thru the seam welder, or portable, where the splicer rolls on wheels into and away from the line. This was used as a portable unit that can be rolled in place as needed. Welding lengths from 3” to 36”(75 mm to 900 mm) Material thickness range from.005” to 3/16”(12 mm to 4.8 mm) Self contained base with manual shear; maximum length is 24”(600 mm) and maximum material thickness is.062”(1.6 mm) Roll around welding platform 8’x 5’. Material thickness range from.005” to 3/8”(12 mm to 9.5 mm) Can be used with GTAW. PAW, or GMAW welding processes. Controller 9600 Series- Actual model 9627. Water cooled mandrel. Automatic centering device. Arc Voltage Controls. Welder Ultima 150. Please do not hesitate to contact me if you have any questions. Tel(781) 201-9008 or by clicking"Ask a Question" at the bottom of this page. Powered by
Miller Maxstar 150 STH Tig Welder with Miller Box
Up for auction is a Miller MaxStar STH Tig Welder 907136 Best of class- Provides maximum portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine. Processes•TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications•Light Industrial Applications•Dairy Industry•Food/Beverage Industry•Restaurant/Kitchen Repair•Experimental Aircraft•Petro/Chem Fabrication•Shipboard Installation/Repair•Maintenance and Repair. Features: New! Miller's exclusive multi-voltage plug(MVP™) allows connection to 115 or 230 V receptacles without tools- choose the plug that fits the receptacle and connect it to the power cord. US Bidders only please. We are located at 6116-A Franconia Road. Alexandria VA 22310 Please feel free call us with any questions or concerns at 703-924-9800. PLEASE NOTE- If ... morepicking up this item from our store location(Royal Pawn Diamond Exchange) A free ARGON GAS TANK will be provided. The tank is pictured in photo number six. Argon tank is not to be included in the regular auction. All items are to be described as best as possible.
Miller Syncrowave 250 AC/DC TIG Welder Water Cooled
Call us at 404-736-6494 with any questions or to get a freightquote. Syncrowave 250 Complete Syncrowave 250 power source Miller Water Cooler RFC-14 Remote foot control 25 ft(7.6 m) TIG torch 20 ft(4.6 m) work lead w/clamp Gas hose Regulator/flowmeter Cable cover, Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) HF Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys. And helps eliminate tungsten spitting and arc rectification. operates only when needed reducing noise. Power consumption, and ... morethe amount of airborne contaminants pulled through the machine. start provides TIG arc starting without the use of high frequency. keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication, Maintenance and Repair, Light Manufacturing, Heavy Manufacturing, Aerospace, Shipbuilding, Tube and Pipe, Vocational, Specifications Input Power Requires 1-Phase Power, Runs on 230 or 460 Volt, Rated Output 250 A at 34 VAC. 40% Duty Cycle, 200 A at 32 VAC. 60% Duty Cycle, Welding Amperage Range 3- 310 Amps, Net Weight 496 lb(225 kg)
AC/DC Tig Welder Cebora Inverter with weldcraft water cooler torch cart + petal
Cebora AC/DC inverter tig sound power source. this is an amazing machine with power capabilities to weld aluminum cans. Razorblades or thick steel and aluminum. this is just as great and can outperform the miller dynasty 200 or the lincolon tig 175 very compact cart with everything on board. Barely used weldtec water cooler and a very comfortable achor watercooled torch. also comes with nice big foot control. the power lugs are standard so you can install any miller or lincolon torch or welding clamp for doing stick welding. This is a 460v 3 phase machine and I dont have the power to use it anymore. Been holding on but I need the space. I have the miller diversion that I can use at home but its not the same at all. replacement cost for this setup is well over $5.000 please compare and checkout the Cebora website. http:www.cebora.it/home_welding_uk.html ... morethey are the best around the world. They are the company that makes the welding machines that Snap-On tools puts their name on. I guarantee it works or ill refund your money. Cebora sound AC/DC 2540/T inverter. Tig active dynamic control. Art.348 cebora. sound digibox tig ac-dc art 220. If you have the power in your shop this is a great deal! 460/480 3 PHASE ONLY WILL NOT WORK ON JUST 220. On Apr-02-13 at 19:59:00 PDT. Seller added the following information: So I have re listed this again because the last winner had some power issues in the shop. And possible miscommunication in reading the description, and even though it was listed as non returnable I want the winner to be satisfied and happy. so everybody can have good feed back thanks Kennett.
lincoln Idealarc TIg 250/250 TIG Welder
This is an excellent TIG and Stick welder. I recently had it completely refurbished. It is just too much welder for me. It has only minutes on it since the rebuild. Also will throw in CNI torch which was over 150$ new. Also comes with foot pedal and regulator! Thanks for looking! Posted with eBay Mobile
2005 LINCOLN ELECTRIC RANGER 8 TOWABLE STICK / TIG WELDER / 8000 WATT GENERATOR!
up for bid is a 2005 LINCOLN ELECTRIC RANGER 8 TOWABLE STICK/TIG WELDER/ 8000 WATT GENERATOR! unit checks out and is ready for work. No title, bill of sale only. pick up recommended. Will ship though, call for quote Lincoln Electric Ranger 8 we can provide operators manual if desired Stick. Tig and wire feed operations possible with machine, No leads included. OUTPUT- GENERATOR Auxiliary Power 8.000 Watts, 60 Hz AC 70 Amps@ 115V 35 Amps@ 230V 1940 hours on machine 2 cylinder. Kohler Command 20 HP, 4 cycle air cooled gasoline engine. 115/230V dual voltage recepticle 2x 120V duplex recepticles 20HP@ 3600 RPM operating speed: high idle: 3700 RPM full load: 3500 RPM low idle: 2200 RPM displacement: 38 cu. in. 9 gal fuel capacity welding output: AC constant current: 225A/25V/100% DC constant current: 210A/25V/100% DC constant voltage: 200A/20V/100% ... morecame from a closing store. tired of renting? ready to own? take a look at the pictures and decide. very exp ensive new. unit weighs 1500 lbs all equipment is sold AS-IS WHERE-IS w/ no warranty. shipping costs are the sole responsibility of the buyer. yes we ship to canada. With QUESTIONS. Please read the listing thouroughly, you may find the answer to your question. If necessary, send a message about this item through ebay. Or call between 9am EST to 4 pm EST Mon through Friday. 9 pm EST to 12:30 pm EST on saturdays. we are closed sunday. you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows call for freight quote or pick-up is available On Nov-25-07 at 07:27:27 PST. Seller added the following information:
lincoln idealarc Tig 300/300 variable Voltage AC/DC welder
Used Lincoln Idealarc Welder AC/DC TIG 300/300. Lincoln Cooling system included. No Tig Gun. Located at Attleboro. Ma Local Pick up or Shipping on Skid LTL or Additional Shipping Charges for delivery on our truck.
Miller Shopmaster 300 CC/CV AC/DC Welder Stick, MIG, TIG on Single Phase Power!
Are you looking for one machine that can Stick. MIG, and TIG AC/DC on Single Phase Power? If so. This Shopmaster 300 is the answer! Call us at 404-736-6494 with any questions or to get a shipping quote. Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) Complete with: Miller Shopmaster 300 AC/DC CC/CV Power Source Miller Wire Feeder MIG Gun Ground Lead Stick Lead TIG Torch Flowmeter Hose Features: Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Lift-Arc™ start provides TIG arc starting without the use of high frequency. LVC™ Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± ... more10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication Maintenance and Repair Light Manufacturing Heavy Manufacturing Aerospace Shipbuilding Tube and Pipe Vocational Specifications Input Power Requires 1-Phase Power Runs on 230 or 460 Volt Rated Output 250 A at 34 VAC. 40% Duty Cycle 200 A at 32 VAC. 60% Duty Cycle Welding Amperage Range 3- 310 Amps Net Weight 496 lb(225 kg)
Miller Dynasty 200DX Tig/Stick Welder Complete Package!! Hand Remote HiFreq/Puls
I have for sale Miller's top of the line Dynasty 200DX tig/stick welder. This machine has everything you need to get welding besides your argon tank. I hate to part with this machine but I have a new baby girl! With that said back to the machine. This machine will weld virtually any weldable material including aluminum with its added AC function. Honestly this machine has every possible added function such as pulse. Spot, dig, fully adjustable slope settings, down to what size tungsten you are using and many more. I am the original owner of this machine, it has been moved around from place to place more than it has been used. The machine only has 23hr 27 minutes on it(so it is basically new) there are some cosmetic blemishes none of which affect the machine's operation. All buttons and knob and display are in perfect condition. It ... morecomes like new 13 foot ground hi-vis heavy 4 gauge Jackson ground lead, 13 foot hi-vis heavy 4 gauge stick stinger lead, 25 foot ultra flex CK Worldwide air cooled tig torch, Miller RHC-14 hand control for tig and stick amperage adjustment, HTP argon flow meter, and owners manual for the machine. I have also added some quick change 115 and 230 volt jumper so you can change back and forth in second with out having to rewire. This is a great machine for someone who needs a portable, reliable, powerhouse for the job or home shop. I am located in Sparta Tn if you would like to try it out. If you have any questions please ask. Here is Miller's specs on the machine: BLUE LIGHTNING TECHNOLOGY• Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc. And extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90% This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20- 250 Hz. provides control for a focused arc. Resulting in better directional control to help pro
Miller Econotig CC. AC/DC Welding Power Source--TIG WELDER
This listing is for a Mi ller Econotig CC AC/DC Welding Power Source T IG WELDER Purchased and Don't Believe Ever USED Sat around Shop Local Pick-Up#0423 Normal 0 MicrosoftInternetExplorer4 CHECK OUT OUR STORE FOR MORE ITEMS US 48 SHIPPING ONLY SOLD AS IS ALL SALES FINAL NO RETURNS ANY QUESTIONS: Please Message Me Bills Speed Shop 1919 Mound Rd Joliet. IL 60436 PURCHASE POLICY: Before purchasing any item(s) PLEASE READ& understand all details about item(s) We can assist you with any questions that you may have. Payments must be received within 72 hours. IF YOU BUY NOW/PURCHASE ITEM YOU ARE RESPONSIBLE TO PAY FOR THAT ITEM. PLEASE DO NOT HIT BUY NOW/PURCHASE AND NOT PAY FEEDBACK POLICY: Please allow us the opportunity to resolve/fix any problems that may occur during your experience with Bill’s Speed Supply before leaving neutral or ... morenegative feedback. All problems can be resolved in a quick and timely manner with your consideration. SHIPPING POLICY: We will combine multiple items to save you money on shipping. We are NOT liable for shipping service transit times. Transit times do vary based upon your location, once we have shipped your item(s) we are NO LONGER Responsible! Please check and view all shipping details and services in the shipping section just below the price column towards the top of the page! You can expect your item within 4-8 BUSINESS days from the time payment is received in full! We appreciate all of your business and look forward to doing more in the future. As stated earlier please allow us the opportunity to handle a problem that may occur in an orderly fashion to avoid neutral or negative feedback, though these policies come off as being blunt and to the point we just want all details to be viewed to avoid any complicated transactions that could arise, Thanks Bill
TIG Torch, TIG welding torch, Wire feed welder, TIG
TIG torch accessory kit. AK-2, series 3, Made by Quality Tig torch& Accessory Company. Sold"As-Is" Used due to not being in original wrapper being. Buyer pays $6.00 shipping to any CONUS address.
Miller Coolmate 4 TIG Welder Water Cooler #20 torch
I have sold my welder and have this coolmate 4 still. So it is for sale It comes with a 25' 20 torch and a dinse connector for the syncrowave. It has four gallons of miller coolant in it. I'm not sure if it can be shipped with the coolant or not Check out my other auctions for a helmet and a finger control Description- Model: Coolmate 4- Manufacturer: Miller- For use with water-cooled torches rated up to 600 amps. 15.000 BTU/hour cooling capacity- Runs on 115 VAC- The best performer in its class- Tough molded polyethylene case with carrying handle- 4 gallon capacity. Height: 16-1/4" Width: 15-1/4" Depth: 18-3/4" Good condition. Comes as pictured. Posted with
Miller Electric Maxstar 91 DC Inverter Arc/Tig welder with Snap Start II
Please read details before bidding 1- We want positive feedback. 2- Please contact us before leaving negative/neutral feedback. We will always do what ever we can to make every buyer a happy buyer. 3- You have 10 days money back guaranteed and real person customer services. 4- After 10 days. The sale is FINAL( no exception) 5- No return. No refund, if negative/neutral feedback given without contacting the seller. 6- Bidder with"0" feedback must contact seller before placing a bid. If not your bid will be canceled without notice. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return.I do my very best to describe items to the best of my ability and send them out ASAP.I will always try my best to your shopping experience a pleasant one.I will leave feedback as soon as feedback is left for ... moreme! DESCRIPTION: YOU ARE LOOKING AT A Miller Electric Maxstar 91 DC Inverter Arc/Tig welder with Snap Start II IN GOOD WORKING CONDITION. AUCTION INCLUDED: Everything as seen on the pictures. No more or no less(actual pi c tures) FEATURES: Miller Maxstar 91 115 Volt 19.5 Amps 2.3 KW 60 Hz Single Phase 14 Volt Output 90 Amps Output 20% Duty Cycle 95 Max OCV Miller Snap Start II 115/230 Volt(set at 115 Volt) 0.5/0.3 Amps 60 Hz Single Phase Preflow and Postflow Timer 14 Pin Remote Receptacle The Hi Freq starter get its power from the welder so you only need one 115 Volt 20 amp power outlet SHIPPING COST: 1- International buyer. Please contact the seller for the shipping cost 2- Package will ship without insured unless buyer pays shipping insurance. 3- Seller is not responsible for any circumstances. If the package is damaged in shipping, lost packages, after the item is shipped. a) Seller will provide the shipping tracking number(if shipped within USA) b) Seller will only provide Customs Declaration number(if shipped outside the USA) c) Shipping rates applies to the Lower 48 states only. Please ask all questions before you bid. Sorry. There are no local pick ups. ITEMS CAN NO
LINCOLN IDEALARC TIG 300/300 VARIABLE VOLTAGE AC/DC ARC WELDER
USED Lincoln Idealarc variable voltage AC/DC welder TIG 300/300 Miller cooling system Includes TIG gun. See pictures for further details Please note this item is off site in Circleville OH Zip 43113. This item is local pick up only. If you send your own truck we can assist in loading. The item will be secured to a pallet- total weight is approx. 1100 lbs. Please contact us to arrange pickup time and the location address. Your feedback will be left after we receive feedback from you. This way we know you have received the items and that you are happy with them and the service that you received. Feel free to email any questions you may have. Please check out my other items. The Parts Room LLC specializes in new and used surplus industrial equipment and parts. The Parts Room LLC is not a representative of any manufacturer listed; all names. ... moreLogos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. The Parts Room is not liable for any products sold; the customer is responsible for proper testing. Installation and use of equipment purchased. We aim to give the best customer service possible. If you are unhappy with any purchase please contact us and we will make it right. All our items are covered under our no hassle 14 day return policy unless stated otherwise. Ohio residents add 7% sales tax. Loc:No. 2 warehouse
Miller Econotig Power Source AC/DC TIG Welder 170 Amp Max
Miller Econotig Power Source 230 Volt AC single phase Arc start High frequency. AC/DC 170 Amp Max 20% duty cycle. Complete system Includes power supply. 12' Ground clamp, 12' stick holder, 12' argon cooled PTA-9 Torch with quick start switch,12' argon cooled WP-17 Torch with quick start switch, Argon Regulator and 12' hose. Remote amperage control with12' cable. Unit is in excellent condition and ready to use. NOTE LOCAL PICK UP IS AVAILABLE* Please ask for shipping costs if required before purchase Thanks!
Thermal Ultra Flex 350 Pulse DC Arc TIG MIG Welder
Search our eBay Store! Thermal Ultra Flex 350 Pulse DC Arc TIG MIG Welder SKU: JV-DYL-B-350PULSE Condition: Used Packaging: Pallet/Skid Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Thermal Ultra Flex 350 Pulse DC Arc TIG MIG Welder Power Source w/Welding Gun& Stand Model: Ultra Flex 350 Physical Condition: Good. Scratches in casing and permanent marker marks. We do not have the necessary facilities to test this product. 15' welding gun is included but has not been tested. 50% 60% 100% I2(1)3~ 375A(275)350A(225)275A U2(1)3~ 35V(31)34V(29)31V Dimensions(L"W"H" 22 x 12 x 18(Welder) PLEASE NOTE. THE FDA ... moreDISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please
Miller CS 280 stick tig welder
miller cs 280 stick welder used welder. Needs a end put on it. LOCAL PICK UP ONLY. Please review pictures and ask questions before bidding. All photos are to be considered part of the description. Please call us at 219-369-6438 if you have any questions. We accept Paypal and Cash on pick up. We can also accept a credit card. If you are going to pick the item up you must contact us to make arrangements. For Buy it Now and Best Offer purchases we ask for immediate payment. Otherwise payment is due within 3 business days of listing end date. Our contact information can be found here http:stores.ebay.com/Alldotcomauctions/Welcome-To-Alldotcom-Auctions.html Shipping We will ship your item within 1 business day after your payment is received and cleared. Some items can be shipped Internationally. International bids must contact us first for a shipping ... morequote before placing bid. International orders are only shipped via USPS International Priority or International Express Mail. We do not ship 1st class as this is not traceable! To our International Customers: Please remember we are not responsible for any customs or duties charges incurred. Returns are accepted only in the case the item was not received as described. You must contact us first through eBay before making a return. Returns received without pre-authorization will incur a 15% restocking fee. Welcome to Alldotcomauctions We are a chain of pawn stores in Indiana. Many of the items we purchase are used. We do our best to test each item and give detailed listings of any known defects. We add many closeup pictures in each listing but are always happy to add more if you request it. Give us a call or email us through eBay with any questions please contact us so we can do our best to make it right. Contact Us At Alldotcomauctions we are here for you and happy to be available to our customers.m-f 9-5 cst. Ebay no longer allows us to have our contact information on the listing. Please follow this link. Cut copy and paste in your browser to our contact information
LINCOLN SQUAREWAVE 350 TIG WELDER REDUCED PRICE!
Lincoln Industrial Model Square Wave 350 Tig Welder. Comes with leads. Wired for 220V, 3ph currently, can be set up for 480V or even single phase 220V. This machine has never been used to its potential(under 150 hrs total) in our shop and we just can't justify keeping it in storage so our loss is your gain. Wand is excellent quality, and has only been used once since it replaced the original. There is not a water cooler that is being sold with this machine. It'll do fine as is for aluminum, but if you're welding a lot of stainless you'll want to get a cooler. This machine puts out enough power to handle most structural work without issue, and it could very easy to pay for this machine in a single job! It's got the normal scratches and dents from being in a shop environment, but overall it's in great shape! We have ... morethis item listed locally also and reserve the right to end this auction at any time unless a successful"Buy it now" sale is completed and payment made in full. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e04e40ba5-0xfa-
New Heavy Duty Mig Tig Acr Welding Cart Welder Cart
| | Welding Cart Sturdy welding tank cart features all steel construction. Features a tilted top shelf for easier access to welder controls. Includes two shelves for extra storage and two safety chains to keep gas cylinder(welding tanks) securely in place. Maximum weight capacity: 100 lbs. Dimensions: Top tray- 17.25' L x 11.8' W; Middle tray- 15.5'L x 11.8' Bottom tray- 28'L x 11.8'W; Two swivel casters on front. 3' high x 3/4' wide; Rear fixed wheels 7-1/4' high x 1-1/2' wide; Overall dimensions: 28' L x 16-1/2' W x 30-1/2' H. SKU: 7688N. Click Image(s) to Enlarge FREE SHIPPING! PAYMENT: Once you have won an auction you will receive a confirmation email from Toolprice. This email will provide you with a link to purchase and checkout with payment by PayPal or Credit Card. Our checkout system ... moregives you the ability to combine auction purchases and check order status including tracking information. SHIPPING INFORMATION: Shipping on this item is FREE to the 48 contiguous Unites States. Free shipping does not apply to Alaska. Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO or outside the USA. Most orders are shipped within 2 business days. Please allow 3-6 business days transit time for delivery. Most orders are shipped to your door via guaranteed UPS Ground Delivery Service. Our shipping service covers shipping, handling, and insurance. Sorry, will call is not available. We ship to the USA only. We do not ship to PO Boxes. Or APO/FPO addresses. ABOUT TOOLPRICE Toolprice was founded in 1996 on a simple concept: Offer quality tools at the lowest possible price. Toolprice is a direct importer so there is no middleman. We pass the savings on to you. We stock over 5000 items for both the contractor and the do-it-yourselfer. We have been an eBay seller since 1999 and are proud to have completed over 63.000 successful eBay transactions. ORDER TRACKING: Most orders are shipped within 2 business days. Please allow 3-6 business days transit time for delivery. You will be
ESAB Tig Welder Foot Control, Foot Pedal, Fc-4 linde tig welder
ESAB FC-4 FOOT PEDAL. 23' OF CABLE IN GREAT SHAPE NO CUT S OR DAMAGE, BOTH PLUGS ARE IN GREAT SHAPE, THIS PEDAL WAS LAST USED ON A LINDE 305 TIG/ STICK WELDER
MILLER MAXSTAR 150S TIG WELDER 907135 FREE SHIPPING
MILLER MAXSTAR 150S TIG WELDER 907135 FREE SHIPPING UP FOR AUCTION IS A. MILLER MAXSTAR 150 STL WELDER CONDITION: USED. TESTED, WORKING 100% TIG Welder. DC, Phase 1 Output Range 5-150 Amps Rated Output 150 A at 16 VInput 28-22 Amps Input Voltage 120-230 OCV 90 or 12-16. 50/60 Hz Includes Power Source With 10 Ft Mvp Power Cord Electrode Holder With 13 Ft Of Weld Cable 10 Ft Work Cable With Clamp And Connectors Shoulder Strap THANK YOU FREE SHIPPING! STATES 5 DAY HANDLING TIME. 99% ARE SHIPPED WITHIN 2 BUSINESS DAYS PLEASE BID WITH CONFIDENCE AS OUR 100% FEEDBACK WILL ASSURE YOU! ABOUT US: WE ARE NEW TO THE EBAY COMMUNITY. OFFERING A VARITY OF PRODUCTS! FROM JEWELRY TO POWER TOOLS! EVERY WEEK WILL BE DIFFERENT! SO MAKE SURE YOU COME BACK AND CHECK US OUT! YOU WON'T BE DISAPPOINTED! RETURN POLICY: WE DO HAVE A RETURN POLICY OF 14 DAYS. IF ... moreYOU ARE NOT SATISFIED IN ANY WAY. YOU CAN RETURN YOUR ITEM FOR A FULL REFUND. ALL WE ASK IS THAT YOU LET US KNOW WHY YOU ARE RETURNING THE ITEM AND GIVE US THE OPPORTUNITY TO RESOLVE ANY ISSUES BEFORE OPENING A CASE OR LEAVING NEGATIVE FEEDBACK AND ANYTHING LESS THAN A 5 STAR RATING. EBAY DOES PENALIZE SELLERS FOR ANYTHING LESS THAN A 5 STAR RATING. WE WILL WORK WITH YOU IN EVERY WAY POSSIBLE TO INSURE YOU'RE TRANSACTION WITH US IS AS HONEST AND PLEASANT AS POSSIBLE. EMAILS: IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL US AND WE WILL GET BACK TO YOU WITH IN 24 HOURS. YOU ARE VERY IMPORTANT TO US. HOWEVER WE ARE CLOSED ON THE WEEKENDS AND HOLIDAYS, PLEASE ALLOW ADDITIONAL TIME FOR A RESPONSE DURING THOSE HOURS. THANK YOU AND HAPPY BIDDING!
Miller XMT 304 CC/CV XMT304 Multi-Puropse DC Inverter Welder ARC MIG TIG
Miller XMT 304 Multi-Puropse DC Inverter Welder. Can do ARC, MIG, or TIG if coupled with the right accessories Condition: Excellent. Has some marks& scratches Can use 230/460 Single or Three Phase Input. Does not come with any accessories Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Miller Bobcat 250 Portable TIG, MIG, ARC Welder Generator LPG Gas (Pick Up Only)
LOCAL PICK UP ONLY Tested. Fully functioning TIG. MIG, ARC welder/ generator. Comes as seen in photos. BRAND NEW BATTERY LOCAL PICK UP ONLY Check out our Ebay store& BUY WITH CONFIDENCE
LINDE UCC305 AC-DC TIG & STICK WELDER UCC-305
LINDE UCC305 STICK& TIG WELDER USED 277/ 480 VOLTS 3 PHASE NO CABLES WITH UNIT WAS WORKING WHEN TAKEN OUT OF SERVICE UNIT IS HEAVY LOCAL P/U OR YOU ARANGE SHIPPING
Welder,Mig-Tig-Stick,300amp.Constant voltage and constant current
This is a like new. Used l-tech,Esab,and several other names depending on who sold it.Known to be one of the best welder companies. This is a 300amp mig,tig,stick constant voltage constant current welder.Tig torch and stick holder optional as originally sold.Includes an almost full roll of stainless steal 316-l wire.No gas cylinder. Must be picked up at Oklahoma City,OK. Must send payment within 5 days.
Arc One 100STS 100 STS Arc Welder Stick 100amps (lift tig)
Great little welder. I've had it since high school and have only used it about 10 times. It has pleny of power for small repairs or welding thinner metals. Although with an adequate bevel i'm sure you could end up putting a large strong weld down. It runs on 120v household current and has yet to blow the breaker, great little welder, portable and ready to take with you. description taken from vehicleservicepro.com. ArcOne's new I 100 STS inverter welding machine is lightweight. Portable, and energy efficient, is made for DC TIG and Stick applications with a duty cycle of 60 amps at 100 percent, 80 amps at 60 percent, and 100 amps at 35 percent. The new inverter comes with ground clamp and electrode holder and features 115 volts. from monstermarketplace.com Arc One Inverter welder I 100 STS The Arc One I 100 STS is the newest addition ... moreto our inverter product line. Weighing in at 10 lbs. This rugged 115 volt machine truly puts out 100 amps so don't hesitate to use 1/8" rod. Duty cycle of 35% at 100 amps. 60 amps full time. 100% duty cycle with TIG at 80 amps; this lightweight machine really goes the extra mile for value. Nicely equipped. Comes with electrode holder and ground clamp with cables plus hot start. An ideal machine for quick on-site repair jobs or the home shop, this ESA approved 100 amp inverter will measure up in performance and value. The Arc One I 100 STS is a superior inverter welder and is backed by a 1 year manufacturer's warranty against all defects resulting from materials or workmanship. The Arc One I 100 STS includes: Power cable, ground cable, electrode holder, ground clamp, Read more:
Welding Training Manuals Ebook Welder TIG
Complete Welding Series sent to you on CD-Rom Training Manual 1 Welding Theory and Application(741 pages) Chapter 1- Introduction Chapter 2- Safety Precautions in Welding Operations Chapter 3- Print Reading and Welding Symbols Chapter 4- Joint Design and Preparation Of Metals Chapter 5- Welding and Cutting Equipment Chapter 6- Welding Techniques Chapter 7- Metals Identification Chapter 8- Electrodes and Filler Metals Chapter 9- Maintenance Welding Operations For Military Equipment Chapter 10- Arc Welding and Cutting Processes Chapter 11- Oxygen Fuel Gas Welding Procedures Chapter 12- Special Applications Chapter 13- Destructive and Non-Destructive Testing Appendices_ Training Manual 2 Welding Operations Parts I& 2 Welding Operations Part I(112 pages) Electrodes classification and intended uses Automotive welding processes Materials Identification ... moreprocesses Methods of destructive and non destructive testing of welds and troubleshooting procedures Types and techniques of joint design and the theory Welding Operations Part II(80 pages) Inert gas welding principles Equipment and safety precautions Gas metal-welding principles Operations and equipment Nomenclature Procedures for troubleshooting welding_ Training Manual 3 WELDING THEORY Welding symbols and their use on shop drawings(52 pages) Training manual 4 DECIPHERING WELDING SYMBOLS(11 pages) Training manual 5 Fundamentals of Professional Welding(213 pages) Lesson 1- Properties and Uses of Metal Lesson 2- Basic Heat Treatment Lesson 3- Introduction to Welding Lesson 4- Gas Cutting Lesson 5- Gas Welding Lesson 6- Soldering. Brazing, Braze Welding, and Wearfacing Lesson 7- Introduction- Shielded Metal-Arc Welding and Wearfacing Lesson 8- Introduction- Gas Shielded-Arc Welding_ Training manual 6 Welding Design Inspection Technical Manual WELDIN
USED LINCOLN IDEALARC TIG-300/300 AC-DC ARC WELDER SGL PH #AC-282488 CODE 7007
OFFERING QTY 1(ONE) USED LINCOLN IDEALARC TIG-300/300 AC-DC ARC WELDER SGL PHase serial#AC-282488 CODE 7007 COMES WITH ALL CABLES SHOWN. GROUND,WELDING LEAD AND POWER CABLE deinstallled working MISSING KNOB ON SPARK INTENSITY DIAL VOLT 230/460 AMPS 150/75 WINNING BIDDER MUST MAKE PAYMENT WITH IN 4 DAYS OF END OF AUCTION OR WE WILL FILE CLAIM FOR NONPAYMENT CAN BE PICKED UP AT OUR WAREHOUSE FOR FREE OR OPTION 1) CAN BE DELIVERED UPTO 6 0 MILES FROM ZIPCODE 44085 FOR $150.00( YOU MUST HAVE FORK LIFT TO UNLOAD FOR THIS OPTION THIS OPTION#1 MUST BE PAID AT CHECKOUT) OR OPTION 2) YOU CAN ARRANGE FREIGHT TO PICK UP AT OUR LOCATION IN 44085 WE HAVE FORKLIFTS THERE. WE WILL STRAP DOWN TO A PALLET. ONCE IT LEAVES OUR LOCATION YOU ARE RESPONSIBLE FOR ANY DAMAGES INCURRED DURING SHIPPING CONTACT US FOR WEIGHT AND PALLET SIZE NO EXCEPTIONS WE WONT ARRANGE ... moreFREIGHT FOR BUYER SORRY IF YOU ARE WINNING BIDDER PLEASE DONT PAY TILL WE SEND INVOICE SEE ALL PHOTOS AND ASK ANY QUESTIONS PRIOR TO BIDDING PLEASE. WE WILL DELIVER VIA OPTION 1 WITH IN 1(ONE) DAY OF RECEIVING CLEARED PAYMENT UNLESS AUCTION ENDS ON WEEKEND THEN WE WILL DELIVER ON MONDAY OR OPTION 2)CAN BE PICKUP WITH IN 1(ONE) DAY OF RECEIVING CLEARED PAYMENT WE CAN LOAD ON WEEKEND PLEASE MAKE ARRANGMENTS FOR WEEKEND PICK UP WE STRIVE TO HAVE PERFECT 5 STAR FEEDBACK DUE TO NUMERIOUS PEOPLE NOT LEAVING FEEDBACK FOR GOOD COMPLETE TRANSACTIONS. WE HAVE NO CHOICE BUT TO CHANGE OUR FEEDBACK POLICY WE WILL LEAVE FEEDBACK FOR BUYERS ONCE TRANSACTION IS COMPLETE AND YOU ARE HAPPY WITH THE PRODUCT AND POSITIVE FEEDBACK HAS BEEN LEFT FOR US AS YOU SEE WE LEAVE FEEDBACK FOR ALL BUYERS. PLEASE CONTACT US PRIOR TO LEAVING NEGATIVE FEEDBACK IF THERE IS A PROBLEM WE WILL GET BACK AND RESOLVE ANY ISSUES USUALLY SAME DAY THANK YOU WE WILL ONLY REFUND IF ITEM IS NOT AS DESCRIBED IN LISTING. OPTION 1 FEES FOR DELIVERY WONT BE REFUNDED AND BUYER WILL PAY RETURN SHIPPING COSTS WITH INSURANCE AND TRACKING. OPTION 2 BUYER WILL PAY RETURN SHIPPING COSTS WITH INSURANCE AND TRACKING REFUND
Weldking CoolArc 160 Stick/Tig Welder Good Shape
SquareTrade © AP6.0 ITEM: Weldking Stick/Tig Welder MODEL: CoolArc 160 CONDITION: Pre-owned The welder has been checked and is in fine working condition. Appearance is good and clean with just a few light scratch marks. It looks to have been used maybe just a few times or so. If that. All auctions run their full course. There are no buy it now prices with our auction listings. TOP CASH PAWN AND JEWELRY-Our Ebay store is seperate from our pawnshops. All questions regarding any items listing on Ebay need to be emailed directly through the Ebay messaging. Please allow up to 24-hours for email response. PAYMENTS-All sales within Texas will require sales tax. We accept Paypal only. LOCAL PICKUPS-Pickup time and date must be scheduled and approved with a 24-hour notice prior to coming in. Local pickup is available Monday-Friday from 9am to ... more5pm. Sales tax will apply. SHIPPING-We ship within the United States Only. We ship via UPS Only. Shipping charges are Non-Refundable. Items are usually shipped within 2-business days of receiving cleared payment. Unless otherwise noted in auction description. REFUNDS-All refunds are subject to approval. Shipping charges are non-refundable. Item returned must be the exact same sold. All serial numbers are recorded along with other identification methods. Buyers must contact us via email with 14-days of auction close date for return eligibility. Full amount may not be refunded for items that are damaged during return due to poor packing of the returned item. Powered by 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e0d81dc51-0xff-
Miller Syncrowave 250 AC/DC Tig Welder water Cooler torch gas regulator complete
Nice used complete tig welding setup DC. AC and hi frequency for aluminum. Includes syncrowave 250 power source(runs on single phase power) miller water cooler, 250 amp brand new wp20-25r water cooled 250 amp 25 foot long tig torch, miller hand amptrol amperage controller, flowmeter inert gas regulator, ground cable/clamp and stick welding cable with electrode clamp. Everything you need to tig weld except a gas bottle. You are welcome to come weld with this unit in my shop prior to purchase. I also have a functionally identical hobart tigwave 250 machine that will be listed shortly if you would rather have an air cooled setup. buyer pays freight shipping from 30527 012-14-fr12-1-11353/550/jsy50 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works ... moreEBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accur
MILLER Syncrowave 250 DX Tig Welder w/ integrated Cooler
bought new used very little just a few hrs never got a chance to use it.everything is here and works and goes with it except bottle. I rent it if you are interested call me prefer to sell locally, if possible. this is a sell through e-bay item AL 2092772861
Miller Maxstar 150 STL Stick Tig Welder No Reserve Free Shipping
You are looking at a very nice used Miller Maxstar 150 STL Stick and Tig machine. The welder has auto links for 120v or 240v. Included is a 12.5' fingertip remote. A 25' 17 Series torch, a ground cable and clamp assembly and Stick Stinger assembly. The owners manual is included. The unit is all packed in a brand new convenient carrying case. The unit works 100% You can see full specs at millerwelds dot com Packaging and shipping is handled by the ups store. If the package is damaged or opened a claim will need to be filed with ups. Don't leave me feedback that says the package was opened on arrival. FILE A UPS CLAIM. Insurance is included! FREE SHIPPING TO LOWER 48 USA ONLY NO RESERVE Posted with
Thermadyne 185TSW AC/DC CC Thermal Arc TIG & Stick Welder
Thermadyne AC/DC CC Thermal Arc Model 185TSW TIG& Stick Welder Condition: Excellent. Has minor marks& scratches 185Amps@ 30% for TIG& 160Amps@ 40% for Stick. Accessories Include: TIG Welding Torch ARC Welding Lead for Stick Weld Ground Lead& Clamp Foot Pedal Instruction Manual Does not come with Gas Regulator or Feed Line Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Lincoln Invertec V205-T AC DC TIG Welder
for sale is a Lincoln Invertec V205 T AC/DC tig welder being sold as is for parts. there is a bad spot on the boards shown. BEING SOLD AS IS PARTS ONLY. Has bad boards. tag says"no power don't use" please bid according. Posted with
MILLER PRO 300 CC/CV DC WELDING GENERATOR BIG BLUE WELDER WIRE TIG STICK DIESEL
Up for Auction is this: Preowned Miller Big Blue Pro 300 CAT Diesel 21.7 hp WELDER/ GENERATOR 907144 Hello ebay community! Up for auction we have this Miller Big Blue Pro 300 Diesel Welder/Generator. Model number is 907144. This unit is powered by CAT 21.7 hp diesel engine. The unit is in Great working conditions. Welder comes only with what you see pictured. No cables included. If its not pictured then its not included. Unit is very nice and 100% mechanically sound. It your looking for preowned quality welder in mechanically sound conditions then you will not be dissapointed. Please google its model number for detailed manufactures specs and technical information. If its not as listed you may send it back for a refund. Please make sure that this item fits your needs as return shipping is the buyers responsibility. You will not be dissapointed. ... moreThis welder cost just over $12,500 after taxes. Unit works flawlessely. There is nothing wrong with it aside from cosmetic defects. No repairs needed. No headaches! Unit is preowned so it might have some cosmetic imperfections such as scratches, dents or scuffs. As you can see in pictures the front left lip is a bit bent and warped. It was dented in and we tried fixing it the best possible. This is just cosmetics. Please view pictures. Unit turns right on. Idles great, all functions as intended. Unit has 2,894 hrs of use which is low for these CAT diesel engines. We will change its oil prior to shipping. Battery is perfect. No oil leaks. Thank you for your time and good luck bidding! Sales tax included in price so theres no additional costs. Unit will sell to the highest bidder. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this item fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated
ESAB HeliArc 160i DC Tig Welder - Complete package! Reg, rods, electrodes, +MORE
Updated with photos of welder running. To show some examples of the adjustability. The first photo is programmable pre-flow of shielding gas prior to startup, second is amperage control(set to 49 amps) third is the duration of the programmable ramp-down prior to shutting off. Many other adjustable settings, these are just an example. This is everything you need to get started welding aside from a tank of argon: ESAB HeliArc 160i DC TIG(and stick) welder. Barely used- Made in Sweden. If you know welders, you know ESAB makes some of the highest-quality machines on the market. I purchased this in 2005 as an unused, new-old-stock power supply only with no accessories(for just shy of $1000) then built a nice package around it with the cables, torch, spares, etc. I would estimate this machine only has 4-5 hours of use. I used it to practice on ... moremild steel and stainless, then used it to build a custom stainless exhaust system for a race car. This is a top-notch machine. And VERY easy to use as a beginner machine; cheap machines have poor amperage control, and the amperage control on this machine is fantastic all the way down to very low amps. It has a nice, programmable ramp-up and ramp-down for starting and stopping. If you want to learn TIG, don't start on a cheap machine! Even buying a new cheap machine + extras, you would still be over the cost of this machine. Also includes several hundred dollars of extras(forgive me if my terminology is not perfect. It has been a while since I purchased all of this) Argon flowmeter regulator with hose. Can also be used with argon mix- Several spare tungsten electrodes in two sizes and electrode holder- Spare shielding gas orifice- Spare shielding gas tip to match spare orifice- High quality. Very flexible, long copper leads with top-notch connectors for the torch lead and ground clamp, all barely used- Trigger-type switch; some use a pedal. I found the trigger easier to use- Pair of pigskin gloves- About 10 lbs of ER70S mild steel 1/16" x 36" welding rods(~$50+
Miller Syncrowave 351 TIG Welder with Cooling System
Local deal fell through so I'm relisting my Syncrowave 351 with really low hours put on. Works great. Welding aluminum, stainless and titanium. Unfortunately collecting more dust than work in my garage. Please contact me for shipping quote. I can offer and pass on fairly decent discount with FedEx Freight. Shipped to East Cost should be more less $500 with gradually less heading West. I would strongly encourage asking for more accurate quote though. Please. Let me know if you have any questions. Thanks and good luck!
Miller Maxstar 90 tig Welder *PRICE REDUCED*
Used welder. In great condition. Includes the 2 hoses not pictured. I don't know a lot about this item as it was my fathers but will try to answer any questions. I apparently had this item listed too high previously, and I apologize for any inconvenience- this is guess work for me. Thanks for looking
ESAB MULTIMASTER 260 MIG TIG STICK WELDER
SHIPPING IS FREE TO THE LOWER 48 STATES ONLY. SHIPPING DISCOUNT FOR ALL OTHER AREAS. ESAB MULTIMASTER 260 WELDER VERY GOOD CLEAN CONDITION USED VERY MINIMALLY YES IT WELDS ALUMINUM INCLUDED: ALL WANDS A FEW CONSUMABLES(AS SHOWN) POWER CORD WHAMMY PEDAL ORIGINAL PAPERWORK BOTTLES NOT INCLUDED
TIG WELDER PEDAL CONTROLLER ARCTROL AS125 LINDE
TIG WELDER PEDAL CONROLLER WITH 18 FT LEADS ARCTROL AS125 WAS ON A LINDE HDA-300
Miller Dynasty 350 Auto-Line 208-575 TIG Welder (907204) Factory Reconditioned
Miller Dynasty 350. Machine Only Miller Part Number 907 204 Serial Number MA460348L Auto-Line models allows for any input voltage hook-up with no manual linking. Providing convenience at any job site. Includes features such as Lift-Arc. And Hot Start, 120V auxiliary power receptacle for water cooling systems or small tools, and program memory that allows up to nine program saves for your parameter settings. This is a factory reconditioned unit that comes with the machine. Power cord(no plug) dinse connectors, and set-up DVD This welder carries a two year factory warranty. We offer a discount on the shipping. Just e-mail us your zip code and indicate whether there is a forklift available to unload this machine. We are a welding supply company in Phoenix. AZ and have been selling new/ used welders and all of your welding supply needs for over ... more45 years. If you have any questions on this or any other welder. Just give us a call Jodi 602 252-0341 or 602 396-1178 John 602 206-0571
Miller Dynasty 200 DX TIG Welder with Stand Pedal Torch Leads and Tank
This is my pride and joy here. Very well kept. I'm sure you all are aware and how cool all the features are on the Dynasty 200DX. That's why you're looking at this. I'm just going to give you a list of what is included, and a description of the condition. The condition on the unit is a 9.9 out of 10. The condition on the torch and pedal are a 7 or 8 out of 10. The pedal cord has a splice in it that does not affect the functionality at all. I forgot to get pictures of the contractor kit and case. That will be included. Everything that is in the contractors kit that you don't see in the pictures is still in the case and is in brand new condition. And will be included as well. Beside that. The tank and custom made stainless steel cart and welding wire that you see in the pictures will all be included. I also have a bunch ... moreof cases of tungsten which will be included. Local Pickup or Buyer to arrange shipping. California Buyers will be charged 8% sales tax.
Lincoln Invertec V200-T TIG welder
This is a Lincoln Electric Invertec V200-T model TIG welder. Works great. Comes with torch(see pictures) and pedal. This is a Single Phase. 230/460 volt welder.
WELDING Welder MIG TIG ARC STICK SPOT Training Course Book lot Machine Helmet
30 Day"NO Questions Asked" Money Back Guarantee! New& Sealed Worldwide Shipping Welding Training Course 997 Pages 4 Courses Training Manual 1- Welding Theory and Application Chapter 1- Introduction Chapter 2- Safety Precautions in Welding Operations Chapter 3- Print Reading and Welding Symbols Chapter 4- Joint Design and Preparation Of Metals Chapter 5- Welding and Cutting Equipment Chapter 6- Welding Techniques Chapter 7- Metals Identification Chapter 8- Electrodes and Filler Metals Chapter 9- Maintenance Welding Operations For Military Equipment Chapter 10- Arc Welding and Cutting Processes Chapter 11- Oxygen Fuel Gas Welding Procedures Chapter 12- Special Applications Chapter 13- Destructive and Non-Destructive Testing Appendices Training Manual 2- Welding Operations Part I Electrodes classification and intended uses Automotive ... morewelding processes Materials Identification processes Methods of destructive and non destructive testing of welds and troubleshooting procedures Types and techniques of joint design and the theory Training Manual 3- Welding Operations Part II Inert gas welding principles Equipment and safety precautions Gas metal-welding principles Operations and equipment Nomenclature Procedures for troubleshooting welding Training Manual 4- Welding Theory Welding symbols Welding symbols on shop drawings The books are in the form of.pdf files and will be delivered on CD-Rom. Money Back Guarantee We're so confident that you will enjoy and benefit from this CD-Rom we're offering it with our"NO Questions Asked" 30 day money back guarantee. If your not completely satisfied. Simply send us a message through eBay and return it within 30 days to receive a FULL refund minus S&H. Take a look at what others had to say about their purchase: System Requirements CD-Rom Drive Windows 98 Windows 2000/NT Windows ME Windows XP Windows Vista Windows 7 Adobe Reader 9 or above(can be downloaded free from Adobe's website) Shipment All items are shipped within 48 business hours. Please
Chicago Electric 165 Amp Tig/Stick Welder with Foot Pedal and Argon
Up for sale is my Chicago Electric Tig/Stick Welder package. I have almost everything included with this to get you started Tig welding. I am including the welder. Tig torch, stick torch, foot pedel, ground clamp, argon reg with hose and fittings, and a half full bottle of argon. The argon bottle is the blue one on the pictures. This welder has had a foot pedel added to it for Tig welding. Use the the buy it now and I will include the cart as well. I will not ship this due to partial bottle of argon and the fact these are hard to ship without damage. Local pick up in 13045
Lincoln Idealarc Arc Welder TM 400/400 Water Cooled Plus Tig
Extremely clean vintage TM 400/400 single phase arc welder with custom rolling cart water cooled with tig and all cables. Cables are super heavy and well worth the price alone. Very nice! Local Pickup/Delivery Preferred. Will ship at buyers cost. Plesae Contact me with any questions and payment methods before bidding. Thank you!
LINCOLN SYNCROWAVE TIG 350 TIG WELDER 350 AMP
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 02131680005 Manufacturer: LINCOLN Description: LINCOLN SYNCROWAVE TIG 350 TIG WELDER 350 AMP Capacity: 350 AMP Model Number: SYNCROWAVE TIG 350 Serial Number: AC846317 Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE S
Miller Maxstar 200 DX P/N 903701-01-1 TIG & Stick Welder Unit
Miller Maxstar 200 DX. P/N 903701-01-1, TIG& Stick Welding Unit Condition: Good. Missing front door, Clean but has scratches Does not include any accessories. Just what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Miller HF-251D-1 High Frequency TIG Welder Attachment
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Miller HF-251D-1 High Frequency TIG Welder Attachment DESCRIPTION: ~ Up for bid is a good working Miller HF-251D-1 high frequency arc starter TIG welder attachment. gsrx_vers_486(GS 6.5.1(486)
Lincoln square wave tig welder
This is a good machine. Comes with torch and power cord. 3 phase 230/460. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e5c6ea261-0xff-
Panasonic TIG Welding AC/DC Power Source Welder YC-300WX2 300A, 230/460V
Click on Picture to Enlarge, Panasonic TIG Welding AC/DC Power Source Welder YC-300WX2 300A. 230/460V This is another fine Gizmo from SurplusGizmos located in Hillsboro Oregon. Panasonic TIG Welding AC/DC Power Source Welder YC-300WX2 300A. 230/460V Item Description and Features: Click on pictures to the left to view larger images. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures. Unless otherwise stated. If it is not pictured, it is likely not included. We are not experts and do not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask ... morebefore you make your purchase and we will do our best to answer your questions to the best of our abilities. Item Condition: Used. Not functioning(not sure exactly why) For parts/repair, etc. Item is sold"as is" No guarantee Testing Done: No testing done You will Receive: 1)Panasonic TIG Welding AC/DC Power Source Welder YC-300WX2 300A. 230/460V Item Weight: Shipping Weight and Dimensions will be determined at the end of the auction. There is up to a $20 handling charge on this item. Item will be Palletized for transport. Our warehouse space is very limited. We can not hold pallets of material in our warehouse for extended periods of time. Item must be paid for and shipped within 10 days. Beyond 10 days. At our discretion, we will either relist the item on eBay, scrap the item, or charge a $10.00 per day, per pallet storage fee to the buyer. Please contact your favorite shipping company such as Seko World Wide at 503-255-8935 for a quote. Another resource is to compare shipping quotes from several companies. You can also reach us by visiting our retail store directly or via phone during normal business hours. SurplusGizmos is located at: 5797 NW Cornelius Pass Road. H
Chicago Electric 130 Amp Tig/90 Amp Arc Welder 220
CHICAGO ARC WELDER-140. THIS UNIT WAS NEVER USED, BOUGHT NEW, I DONT HAVE ORIGINAL BOX OR MANUAL, I NEVER PUT A PLUG ON UNIT. I DONT HAVE USE FOR ITEM ANYMORE,ITEM JUST COLLECTED DUST. 115/230 electro sizes 1/16 to 5/64(115v)1/16" to 3/32"230v) draw 42amp maximum amperage output:140 amp im selling item as used since i dont have original box or manuals all what you see in pictures is what will be auctioned off.
Miller Maxstar 150 STL 150STL TIG & Stick Welder Unit 907135017
Miller Maxstar 150 STL TIG& Stick Welding Unit. Miller Stock No. 907135017 Condition: Excellent. Clean with just some minor marks& scratches Accessories include: Weld Craft TIG Torch& Lead Set of Torch Tips Remote Tumbwheel Control with Cable ARC Welding Lead for Stick Weld Extension for Arc Lead Ground Lead& Clamp Gas Line 120& 240 VAC Interchangeable Plug Connectors Hard Carrying Case Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
REFURBISHED 3in1 50A Plasma Cutter 200A Tig, Stick Welder 110/220V
REFURBISHED- GREAT QUALITY! DUAL VOLTAGE- PLASMA CUTTER WITH TIG/STICK WELDER! FREE SHIPPING AND 3 MONTHS WARRANTY INCLUDED! GENERAL OVERVIEW Make: LOTOS Year: 2012 Model: CT520D- The cover of the machine is blue. Type: 3-in-1 50A Plasma Cutter 200A TIG Welder. 200A STICK Welder Condition: Manufacture Refurbished and tested in 110/220vac and works great. For Most of these machines. Damaged circuit board are either repaired or replaced. Function and duty cycle are fully tested by engineer before shipping out) For the outside case. There might be some scratches or dents. But it won't affect machine performance at all. If you are purchasing this product as a Gift, we recommend you to buy a Brand New Lotos machine. The Packing box may NOT be the original box. Status: IN STOCK(Ships in 2 Business Days) Features: 50A plasma cutter. Automatic ... moreDUAL Voltage(110VAC/220VAC) DUAL Frequency( 50Hz/60Hz) High Quality FUJI Mosfets(Total: 12) from Japan• Refurbished yet double function tested and performance tuned prior to shipping• PAPST cooling system from Germany• 3 MONTHS Warranty on Parts and Labor from Lotos California or other Authorized Lotos Dealers/Repair Centers. Input Voltage: 110~220 VAC(Auto Detected-NO Switch is necessary) Input Power Frequency: 50 hz/ 60 hz(Better performance under 60 hz) Insulation Grade: B• Housing Protection Grade: IP21• Size: 17' L x 8' W x 11' H• Weight: 55 lbs• CE. CCC, CSA and ISO-9001 certification• Power factor: 0.93• Power efficiency: 85% If you would like to purchase extra warranty please refer to: LOTOS Extended 3 year WARRANTY Accessories: 50A Plasma Torch• Larger Torch(with long and short caps) Air Filter/Regulator with accessories and brackets• Air Hose• Argon Regulator(U.S Standard Argon Regulator with CGA580 Connector• Stick(ARC) Holder• Ground Clamp& Cable• Footpedal• User Manual. Quick Setup Guide Warranty: 3 Months(Parts and Labor) Please see above for 3 year extra warranty option! ABOUT LOTOS Since 2000 Lotos intro
WE F HOBART TIG WELDER FOOT PEDAL CYBER TIG CT 300 CT 200 362668 409004A
BUY IT NOW NO WAITING. ORIGINAL HOBART TIG WELDER FOOT PEDAL. FITS THE OLDER MACHINES BELIEVE THE CYBER TIG CT200 AND CT300. THIS IS SOLID CAST ALUMINUM NOT SOME PIECE OF CRAP PLASTIC OR SHEET METAL. MODEL IS 362668. SWITCH IS 125 VOLT AT 15 AMP AND RHEOSTAT IS 25.000 OHM 2 WATT. WILL FIT ANY OF THE WELDERS THAT USE THE 10 PIN CONNECTOR. INTERCHANGES WITH THE 409004A PEDAL ALSO. YOU ONLY GET WHAT IS PICTURED AND DESCRIBED IN AD AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM ... moreFILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO
MILLER MAXSTAR 150 STH TIG WELDER W/ CARRYING CASE
MILLER MAXSTAR 150 STH TIG WELDER W/ CARRYING CASE IN LIKE NEW CONDITION. TESTED AND WORKING JUST FINE. AS PICTURED. Testing· Used merchandise is always thoroughly tested. And any problem will be noted in the description or shown in pictures. Because we sell a wide variety of merchandise, sometimes we don't know how to test every feature. You are therefore welcomed to contact us via Ebay email system to require specific testing. We will make every effort to comply with your request before your bid. Please thoroughly verify any product. And contact us within 72 hours in case you are not satisfied with your purchase. Please consider that mistakes on testing may occur and are not intentional, and we will do anything we can to solve problems that may occur to protect your purchase. Merchandise listed as“New” or“New Sealed” is not tested. ... moreIn order to preserve the condition of the product and of the box. Return Policy We seek 100% customer satisfaction. For this reason. We will try to do our best to solve any problem that you may have with your purchase. We will make every attempt possible to resolve the issue if we made a mistake(It happens) Please do not assume a mistake is intentional. Let us know if our service could be better! You are welcomed to contact us via the Ebay email system in order to discuss your case prior deciding to return. We will be happy to accept returns within 14 days of delivery under these following guidelines: We accept only USPS as return carrier. All returned merchandise must be in original condition. And must include the original factory box(UPC bar codes and serial numbers must be intact) and factory packaging(e.g. foam, plastic, wrappings, etc. peripherals(e.g. battery, charger, cords, straps, etc. included warranty cards(without markings) and all instruction booklets and paperwork. A 20% restocking fee will be applied to any OPENED merchandise that is not defective. We do not accept returns for items listed as“New” or“Like New” after 14 days from the delivery; when yo
WARDS POWERCRAFT TIG / STICK WELDER SET UP
I'LL START BY S A YING TH AT THIS WELDING SET UP WAS MY DA D'S. I HAVE NO IDEA HOW IT WORKS. TH E BO TTOM IS A POWER KRAFT 295 STICK WELDER. THE TOP PART IS NEW POWER KRAFT HIGH FREQUENCY ARC STATILZER THAT ALLOWS YOU TO WELD ALUMINUM. STAINLESS STEEL, ETC. I KNOW BY DAD USED THE LOWER UNIT. HOWEVER HE NEVER DID USE THE UPPER UNIT. THE PARTS ALL SEEM TO BE IN GOOD CO ND ITION. LOOK AT PICTURES CAREFULLY. THE TIG TORCH HA S NEVER BEEN FIRED UP. T HE CABLES ARE IN LIKE NEW CONDITION. I BELIEVE THE LOWER UNIT NEEDS 220 VOLTS AND THE STABILZER NEEDS 120 V O LTS TO OPERATE. THERE IS ALSO A LOT OF STICK W ELDING RODS THAT GO WITH IT. I THINK YOU HAVE TO HAVE A BOTTLE OF G AS ALSO AS THERE ARE GAS GAUGES WITH IT. THIS WILL BE LOCA L PICK UP ONLY. I ACCEPT RETURNS
Miller Switchcraft Tig Welder Fingertip Control
Miller Switchcraft fingertip current control. Attaches to torch head using straps giving the user fingertip control of current without a pedal. Great for applications where a pedal can not be used. I have used this accessory twice. It is in great condition. 28 ft. long cord. Posted with
275 Amp Lincoln Electric Precision Tig Welder
This tig welder works Great but used rarely. This machine is water cooled and has never been out doors. I have tungsten tips and stick welding leads for this machine. This item will be for PICK UP ONLY. I will supply one Large Argon Tank"New" never taped.
Miller TIG Welder 200DX RFCS-14 HD Foot Control Tig torch & ground lead package
You are bidding on my extra set of used miller accessories(from a Miller Dynasty 200DX) that include TIG torch(will come as shown in photo# 2) Ground lead and HD Foot pedal for Tig Welder all in great working condition. Will sell separately if need be so make and offer for 1, 2 or for all pieces. Offers for 1 item should be specified in the offer description comments. Must sell, moving and don't need to take with me, no reasonable offer refused! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e6b70abe3-0x105-
MILLER MAXSTAR 150 STL TIG / STICK WELDER & BUNDLE IN CASE _8 11425
MILLER MAXSTAR 150 STL TIG/ STICK WELDER& BUNDLE IN CASE_8 11425 MILLER MAXSTAR 150 STL TIG/ STICK WELDER 10FT POWER CORD MVP PLUGS(115V. 15A& 230 V, 50A) WELDCRAFT TIG TORCH 13FT STICK ELECTRODE HOLDER 10FT WORK CLAP SMITH REGULATOR WITH GAS HOSE STRAP X CASE MINIMUM WELDING THICKNESS: 020 STEEL MAXIMUM WELDING THICKNESS: 3/16" STEEL REQUIRES 1 PHASE POWER Condition: Welder. Gently used(light scratches) Accessories, good used. Main welder looks and functions great. The end of the stick welder electrode holder shows some wear as seen in pictures. All other items are in good condition. Comes just as shown. ADDITIONAL PHOTOS BELOW: PLEASE READ BEFORE BIDDING SHIPPING We ship to PAYPAL ADDRESSES within the UNITED STATES. Please be sure the address in your PayPal account is correct PRIOR to bidding. We will not be responsible for ... morethe rerouting of a packages. Our items are shipped via UPS. Please DO NOT ask us to use another service. No PO. FPO, APO, or PMB Boxes please* For the protection of both the buyer and seller. We require an adult signature. If you have any concerns please email us before placing a bid. PAYMENT Payment is required in full via PAYPAL within 7 days of the end of the auction. Sales tax applies for local and shipped purchases in the state of Arizona. TERMS of SALE All auction pictures are of the actual item or items for purchase and are in good working order. Unless otherwise stated. Most of our auctions start at $.99 with no reserve. We stand behind our products. If for some reason you have an issue with the item you have received, please email us. We offer a 100% money back guarantee. Please contact us within three(3) days with any issues. All returns require an inspection to verify the reported issue. Items must be returned in the same condition that they were received. We require confirmed return delivery on any returned item. If the item was damaged in shipping, please notify us immediately and we will assist in filing a claim. Our goal is to have a smooth transaction with ou
MILLER CST 280 Tig/ Stick Welder
I HAVE FOR AN AUCTION A MILLER CST280 TIG/STICK SINGLE OR THREE PHASE. I HAD USE IT FOR ABOUT THREE MONTHS, IN VERY GOOD WORKING CONDITIONS, NO ONE PROBLEM, IM LOOKING TO BUY A BIGGER MACHINE SO I DONT HAVE USE OF THIS ONE ANY MORE.IT COMES WITH THE TIG TORCH AND GROUND ALSO THE GAUGES.CUSTOMER WILL BE RESPONSIBLE FOR SHIPPING AND HANDLING DEPENDING ON THE LOCATION. Input Power Requires 3- or 1-Phase Power, Rated Output 3 ph: 280A@ 31.2V. 35% duty cycle, 3 ph: 200A@ 28V. 100% duty cycle, 1 ph: 200A@ 28V. 50% duty cycle, 1 ph: 150A@ 26V. 100% duty cycle, Welding Amperage Range 5- 200 Amps- 1 phase, 5- 280 Amps- 3 phase, THANKS IF ANY QUESTIONS FEEL FREE TO CONTACT ME 832-390-7815
lincoln tig welder ac / dc 175 pro 220v
you are looking at a lincoln 175 pro tig welder this machine can weld aluminum the machine is 220 volt and comes complete with foot control. Tig torch, ground lead and stick torch the machine works great due to size and weight its pick up only sorry
Lincoln Ideal Arc Welder Model TIG 300/300 AC /DC Arc Welder
Normal 0 false false false EN-US X-NONE X-NONE This is a used Ideal Arc Lincoln Welder Model Tig 300/300. Vintage but a good welder. Input single phase. Volts 220/440, Amps 10.4, cycle 60. Model 300/300. Code-No 5319-CH Model AC 200502. The welder is 40 ½ inches tall, 26 inches wide and the depth is 28 inches. Also comes with Argon tank. This welder was used in a one man machine shop. So it was not used all the time. PICK UP ON SITE ONLY. I have nothing here on site to help load. USED and SOLD AS IS US ONLY PAYPAL.
5 WALHONDE PIPE FITTER CLAMP CLAMPS TIG WELDER ORBITAL WELD PIPE TO PIPE / ELBOW
This auction is for five used Walhonde Pipefitter pipe clamps. I am selling these as used but they don't look to have been used much. If any at all. They are a little dirty and have a light coat of surface rust on the steel parts. Sizes are listed below. These are also availible for free local pick up. Accurately aligns pipe to pipe quickly; controls high-low and the ability to set gap or spacing between pipes. Rounds out pipe on thin wall. Works on carbon steel& stainless. Made of light weight cast aluminum. The company web site is if you would like to watch there video or need more infomation. 4" Pipe to pipe 4" Pipe to elbow 6" Pipe to pipe 6" Pipe to elbow 8" Pipe to pipe, All my items are sold AS IS with no warranty and no return. Shipping is to the U.S.A. only. Email any questions and thanks for your ... moreinterest. Powered by The free listing tool. List your items fast and easy and manage your active items.
Miller Invision 456P Mig & Tig welder w Cobramatic Push-Pull wire feeder & more
click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge You are viewing a Miller Invision 456P with the Cobramatic wire feeder. The Cobramatic is model 150-006 and the whole setup is in EXCELLENT condition. The Miller Optima remote pulsing pendant controller and the Miller Coolmate 4 welding water cooler are included. Mig and tig functions on this great. 450 amp welder. This welding system is guaranteed to be working well and has been fully tested. View all the pictures and bid with confidence. internal: MF- 040813L) SEND ME FURTHER QUESTIONS AND COMMENTS! Condition Legend: MINT/ NEW: Never used or appears never used. Excellent: Like new condition with very little wear Very Good: Few scratches or engravings. Good: Scratches or engravings. Small but noticeable. ... moreFair: Substantial wear and scratches. But item is functional. WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive a total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. 13% HST for Ontario and BC customers and the East coast) 3. complete payment(we accept paypal or credit card over the phone) 4. In just 5-7* days receive your item quickly with UPS to the US and Canada Post to Canada or a freight company INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly packaged and shipped. As soon as I receive your TRACKIN
Miller Syncrowave 250 CC AC/DC TIG Welder w/ Coolmate 3. GroundLead TorchHead
Miller Synchrowave 250 CC AC/DC TIG Welder w ith Integrated Cool mate3 Welding Power Source comes with ground lead. Torch head, gas gauge and foot pedal. Volts 200/230/460 Amperes 105.8/92/46 KW 11.4 Phase 1 Hertz 60 Stock#903586 Serial#LA302901 In excellent condition. Please contact me with any questions. Thanks for looking! On Apr-03-13 at 07:40:41 PDT. Seller added the following information:
Hobart Porta-Tig Portable TIG Welder
Hobart Porta-Tig I am selling all of my welding and cutting equipment because i retired four years ago and will never use it again. Please ask any questions before bidding and i will do my best to answer. This machine is small and compact and very simple to use. It has the gas and water valves built in and all of the controls are simple to understand and operate. It is 480 volt 1 or 3 phase ONLY You may pick up or will ship by FEDEX or UPS
CHICAGO ELECTRIC 240 Volt Inverter Arc/TIG Welder with Digital Readout 98233
YOU ARE BIDDING ON A CHICAGO ELECTRIC 240 Volt Inverter Arc/TIG Welder with Digital Readout 98233 SELLING OFF SOME OF MY DADS TOOLS THAT HE NO LONGER USES. THIS IS A GREAT FIND BECAUSE HE ONLY USED IT A FEW TIMES.AS YOU CAN TELL BY THE PICS IT STILL LOOKS GREAT.AS FAR AS I CAN TELL EVERYTHING IS INCLUDED BUT TAKE A LOOK AT THE PICS.THESE ARE THE ITEMS HE HAD WITH IT.LAST TIME HE USED IT WAS WORKING GREAT AND LIKE I SAID HE PROBABLY USED IT 3 TIMES SO IT SHOULD BE IN TIP TOP CONDITION. SEE PICS FOR MORE AS THIS IS THE BEST WAY TO TELL IF THIS IS THE RIGHT ITEM FOR YOU! INCLUDED: CHICAGO ELECTRIC 240 Volt Inverter Arc/TIG Welder with Digital Readout 98233 COMES WITH ALL THE ITEMS PICTURED.THESE ARE THE EXACT ITEMS YOU WILL RECEIVE.NOTHING MORE NOTHING LESS! ALL ITEMS ARE GUARANTEED AS DESCRIBED OR YOUR MONEY BACK! PLEASE READ THE TERMS AND ... moreCONDITIONS BEFORE BIDDING! AUCTION TERMS& INFORMATION Feedback: Before you leave a neutral or negative feedback. Please contact us. Let us know what we can do to assist you further. We love our customers and we are here to make you happy! Returns: Returns are reviewed on a case by case basis unless marked"As-Is" or"No refunds or returns" These Items cannot not be guaranteed for working or cosmetic condition. Tax: Shipments within Florida are subject to sales tax. This includes items that are picked up locally. No exceptions. Payment Information: All payments should be received within 48 hours of the end of the auction. Shipping information: It is our goal to ship within 1 business day of receipt of payment. Weekend and holidays may occasionally cause delays.
Miller Maxstar 150 STL TIG Welder w/ Extras
Miller Maxstar 150 STL TIG Welder w/ Extras In good working condition. Tested. Comes with(2) grounds. Weld craft gun(WP 17) 3) new Weld Craft tips and original Miller hard case. Also included is a Smith gas regulator and hose.
WELDER SAF SAXOTIG 1600 TIG/STICK D/C
Description
MILLER MAXSTAR 150 STL TIG/Stick Portable ELECTRIC WELDER SAVE L@@K
UP FOR AUCTION IS A LIKE NEW Welder Was Used Once. Still In Mint Working Conditions 5-DAY AUCTION AT NO RESERVE Welder Is Not Reconditioned Or Refurbished DESCRIPTION Miller Maxstar® 150 STL TIG welder provides maximum portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine. Processes Lift Arc™ DC TIG(GTAW) Stick(SMAW) Applications Light Industrial Applications Maintenance and Repair Steel Erection Mechanical Contractors Dairy Industry Food/Beverage Industry Experimental Aircraf Included: Stick Electrode Holder. Work Clamp, Strap& Power Cord(ALL PICTURED IS INCLUDED) NO RESERVE ON THIS ITEM. SORRY! NO LOCAL PICK UPS SHIPPING AND HANDLING FOR THIS ITEM ANYWHERE IN THE LOWER 48 CONTINENTAL STATES IN THE USA WILL BE $ 38.00 THANKS AND PLEASE TAKE A LOOK AT ALL ... moreMY OTHER ITEM.
Chicago Electric Welding Systems 130 Amp TIG/90 AMP ARC Welder NO RESERVE
Welcome to our Auctions Please Come Back Often. We Receive& List New Items Daily. You never know what you may find! The items is in used. Working condition. Shows some scratches and sings of use. Overall looks very nice. The hoses are a bit dried out. Comes as shown in the pictures with no accessories. PLEASE NOTE: EBAY'S ITEM DESCRIPTION MAY NOT MATCH TO THE ACTUAL ITEM FOR SALE. This Item Comes in AS-IS(as described& shown in the pictures) condition- Please see the pictures provided in the item description. PLEASE NOTE: Item will not be shipped to Russia. Ukraine, Belarus or to any Eastern European country. Customer Satisfaction is our#1 Priority. We strive to provide you with superior shopping experience. We are located in California. Our business hours are Monday-Friday from 9:30am- 6:00pm PST& Saturday from 10:00am- 4:00 ... morepm PST. Please be advised, that our department closed after these hours or days of operation allow us until the following business day to replay to you. We describe our items very carefully and provide plenty of pictures. Please ask us any questions you may have prior to bidding. All sales are Final& in As-Is condition. Unless we grossly misrepresent the item. Upon receipt of your merchandise. Please inspect it very carefully and let us know with in 24 hours of arrival if there are any problems or concerns. We will work with you to resolve these problems. We humbly ask you to give us an opportunity to resolve your concerns prior to you leaving a Neutral or Negative feedback. Poor seller ratings or opening any cases against us. All of these things hurt our seller standing and increase the fees we have to pay to be a seller. We love helping our customers! Attention INTERNATIONAL Bidders! Please contact us via eBay messages. Using"ask seller a question" option, to obtain a shipping quote to your country. Please be advised that in some cases we have to ship using Express mail. To ensure a safe and timely delivery of your item/s Our Payment& Shipping Policy: 1) W
MILLER SYNCROWAVE 351 TIG WELDER WITH COOLER COMPLETE PACKAGE-no argon
this is a unit that can due it all. 2 TO 400 AMPS 1 PHASE OR 3 PHASE SET FOR 220-240 VOLT 1 PHASE' only" cart.Water cooler,regulator,torch,ground clamp,tool tray-custom.all you need is argon
EVERLAST Powerarc140st TIG Stick Welder WITH TONS OF ACCESSORIES!
I am selling my Everlast Powerarc140ST Inverter DC Stick Welder with Tig capabilities. I only needed this welder for a small tig job and only used it to weld for maybe an hour or two. It is basically new. I will include everything that originally came with the welder including the consumables(3 tig cups. 3 collets, 1 collet holder, 2 tig torch backcaps) wire brush, welding face shield, tig torch, work clamp, stick electrode holder, 30amp/240v plug, manual, and the carrying case. With this welder I have a ton of accessories needed to start tig welding immediately. I will include a pack of 2% lanthanated tungsten electrodes for tig welding, which includes 4 X.04" and 4 X 1/16" I will include a bunch of tig rods(ER70s-2 1/16" and almost an entire spool of er70s-6 mig wire which can be used for light tig jobs. I will include a ... more20 cu ft argon cylinder(argon gas not included, refill this at local welding supply for around $25) with regulator/gauge. This is everything you need to start tig welding besides the argon gas and everything you need to start stick welding besides the sticks. THIS ENTIRE SETUP WITH ACCESSORIES COSTED OVER $400! The welder alone costs $275, and the argon cylinder $75! I will only ship to the United States.
Miller Dynasty 350 AC/DC Tig Welder (TigRunner Package)
Miller Dynasty 350 TigRunner package with 3.5 gallon built in water cooler- 350amp AC/DC GTAW(Tig) Welder. 57hrs of arc time on it. Brand new in 2010. Manufactured in 2008. Includes the following: 25FT CK230 Flex Head 300amp Tig Torch/ 500 Amp Lenco LPG-500 ground clamp/ 13' of ground cable/ Victor HRK-1425-580 Flowmeter/ 25' of 3 phase power cable/ 30' CK Worldwide Linear"Amptrack" thumb amperage control/ Foot Pedal(wired) Cart. Item will ship as freight on pallet. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e9bd287c7-0x101-
LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER
aims LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This item was previously on auction. Previous high bidder did not have their financing in order to complete sale. Please be sure your financing arrangements are firm before bidding. Made in the U.S.A. by The Lincoln Electric Company of Cleveland. Ohio. This is a used Square Wave Tig AC/DC Welder in GREAT condition. Model# Square Wave 350 Serial# AC744341 Code# 9492 Features: ... moreExcellent Arc Starting and Stability for smooth. Easy-to-make welds. Pulse Adjustment of Frequency. Background and Peak Current for easier control of the arc, preventing burn through. Specifications: Input: Volts: 208/ 230/ 460 Amperes: 110/ 100/ 50 Hz: 60 Phase: 1. Output: Volts: 34 Amperes: 350 Duty Cycle: 40% Maximum O.C.V. 80. General: Overall Dimensions: 23" x 41" x 44" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER LINCOLN SQUARE WAVE TIG 350 AC/DC WELDER Reliable Tool Inc. c 2011 | Powered by
Rare! Lincoln Welder Tig Hi-Freq Frequency Generator Operating Manual
Very nice Lincoln Welders High Frequency Generator operating manual for code 8001 and higher. For older codes see IM-238-B. Contains information on parts. Setup, troubleshooting and much more. There are 20 pages to the manual. On May-12-13 at 01:08:21 PDT. Seller added the following information:
Miller welder 300 syncrowave with cooler lincon tig stick mig
Nice used miller 300 welder from tech college. This unit has cooler Also. Email with any questions. No leads. I bought this with some other equipment and have no use for it. I will load on truck. Just buyer arranges shipping Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13ea1498678-0x102-
Miller TIG-RIG WP-1 Gold Star 300SS Airco Aircospot TIG & Spot Welder System
Miller TIG-RIG Welding System Miller TIG-RIG welding system in excellent used condition. This system was in an R&D environment and was used very little. This is unique system that includes an Airco spot welder and Bernard chiller. Includes: Miller WP-1 Weld Programmer. Serial JB502196- Miller TIG-RIG. Serial JB558813- Miller Gold Star 300SS Direct Current Arc Welding Power Source. Serial JB571978- Miller RFCS-23 foot pedal- Airco Aircospot Spot Welder. Model SHC-A, serial AH102235- Airco Spot Gun. Model SH25-C, serial C226- Bernard Chiller. Model 250S SS, serial WC10483- Heliarc TIG Torch- All cables and hoses required for use Does NOT include gas tanks of any type Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When contacting us please include: Shipment ZIP code- Whether this ... morewill be delivered to a business with a dock and/or forktruck or a residence Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($75 crating fee added to total) or we can provide a competitive quote. Shipping weight 1000 lbs. International Buyers– Please Note: International packaging of these items will be $200 for crating Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do
Miller Syncrowave 300 AC/DC Tig Welder - water cooled + Pulsed 415v
View my other items for more Top Quality Welding equipment Specialist Machine Parts Ltd 01299 878965 The approved and accredited Miller warranty and non-warranty repair centre for the UK Experts in the repair and service of all other makes. We also supply Top Quality used welding equipment. All the equipment we supply is fully overhauled and tested in all functions and comes with a 6 month warranty. For auction- a top quality Miller Syncrowave 300. A Water cooled, Pulsed and squarewave 375 amp max AC/ DC Tig welder c/w foot control- known for its excellent weld quality and supreme reliance. The welder is in excellent working and phsical order- 8/10. The unit can weld the lightest gauge material( inc all ferrous material. Magnesium and Aluminium and its alloys) to the very heaviest guage. Functions include- pulse functions inc Pulses/ sec. ... moreBackground current and% on time, HF start or lift arc, Crater fill/ slope down, AC Balance for squarewave, post gas control, High/ low range, Arc control and start control. The unit has a welding range of 5- 375 amps AC or DC and a duty cycle of 60% 300 amps. The package comes complete with a foot control. WP 18 a Water cooled tig torch, earth lead, gas hose, operators manual and 6 month return to base warranty. Carriage to England and Wales is £55 + VAT = £66.00- elsewhere please contact us for a quote- stating post code. Area code or Zip code. You are more than welcome to come and try the machine here at Stourport. If you have any questions please email or call us on– 01299 878965 S.M.P Ltd is a specialist dealer in Arc Welding Equipment. We have over 35 years experience in the design. Repair and servicing of MMA, Mig, Tig welders, Plasma cutting equipment and Welder Generators. All the equipment we offer is fully overhauled. Tested for electrical safety and offered with a 6 month Return to base guarantee. conditions of RTB guarantee = SMP Ltd will repair the machine free of parts and labour costs for six months from date despatched from o
Miller RFCS-23 Tig Welder Foot Pedal
THIS IS A NICE MILLERRCFS-23 FOOT CONTROLLER GOOD CONDITION# Shipping on this item is 21.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if ... moreit is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item12 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ea39b180f-0xf4-
SAF Nertabloc 260 TH AC/DC Tig Welder 240 or 415v
Specialist Machine Parts Ltd 01299 878965 The approved and accredited Miller warranty and non-warranty repair centre for the UK We also supply Top Quality used welding equipment. All the equipment we supply is fully overhauled and tested in all functions and comes with a 6 month warranty. For auction- a top quality French made Saf Nertabloc 260 AC/DC Tig welder- This is a medium to heavy duty and reliable machine. The welder is in excellent working and physical order- 7.5/10. This unit will run on single phase 230 v ro 415 v NB- to run on 230v you will need a 90A primary supply. The unit can weld the lightest gauge material( inc all ferrous material. Stainless steel, Aluminium and its alloys) to reasonably guage. Functions include- Digital meter. Slope up, slope down, pre and post gas control, Tig/ MMA switch and trigger latch and non latch. ... moreThe unit has a welding range of 5- 250 amps AC or DC and a duty cycle of 60% 250 amps. The package comes complete with a WP26 air cooled tig torch. Earth lead, gas hose and 6 month return to base warranty. A NEW foot control can be added for an additional £130+ VAT Carriage to England or Wales- £55 + VAT = £ 66.00- elsewhere please contact for a price. You are more than welcome to come and try the machine here at Stourport. If you have any questions please email or call us on– 01299 878965 S.M.P Ltd is a specialist dealer in Arc Welding Equipment. We have over 35 years experience in the design. Repair and servicing of MMA, Mig, Tig welders, Plasma cutting equipment and Welder Generators. All the equipment we offer is fully overhauled, tested for electrical safety and offered with a 6 month Return to base guarantee. conditions of RTB guarantee = SMP Ltd will repair the machine free of parts and labour costs for six months from date despatched from our works, the purchaser is responsible for shipping charges to us, SMP Ltd will pay shipping charge return to the customer, guarantee does not cover faults or damage caused by purchaser or no fault fou
25' Heavy Duty Mig Tig Welder Cord 600V 14/3 ST Carol brand
25' Heavy Duty Mig Tig Welder Cord pre-owned in very good condition. Cord made by Carol 14/3 600V ST Check out my! Be sure to add me to your! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ea5a2c987-0x105-