|
How to Run a Lathe South Bend Lathe, Soft Cover, 55th Edition Good condition
Up for auction is this"like new condition" booklet.How To Run a Lathe" by South Bend Lathe. Inc. This booklet is the 55th edition and seems that it was never used. When you go to open the booklet, the pages don't even open all the way, so you can tell no one has ever used it. It opens flat to the center. This booklet does have a sticker on the front from the store that it came from.Lowry's Electric in Williamsport, PA. We will ship this item to the continental USA.ONLY! via USPS We are selling this item"as is" so please ask any questions before bidding or buying. Thank you and God bless you.
|
|
|
3/4 HP BALL BEARING F/W CAPACITOR START MOTOR 1750 RPM SOUTH BEND ATLAS LATHE
3/4 HORSEPOWER BALL BEARING CAPACITOR MOTOR 5/8" SHAFT 3/16" KEY 1750 RPM 115 VOLTS TYPE-SCS The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
ORIGINAL SOUTH BEND 9" METAL LATHE 80 TOOTH THREADING CHANGE GEAR
Original 80 tooth change gear for a 9" South Bend lathe. Single keyed 9/16" bore. 4 9/16" outer diameter, 3/8" thick. Scribed 80 on the sides. A few marks noted, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIGINAL SOUTH BEND 9" METAL LATHE 60 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original 60 tooth change gear for a 9" South Bend lathe. Single keyed 9/16" bore. 3 7/16" outer diameter, 3/8" thick. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT SOUTH BEND 9" LATHE CHANGE GEAR BANJO BRACKET & BOLT ASSY
Excellent Condition- Original change gear banjo bracket and bolt for a South Bend 9" lathe. This was removed from a Model B South Bend 9" In excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE SOUTH BEND 9" LATHE HEADSTOCK HARDWARE OIL CUPS OILERS GITS PT2677NR1
Very Nice- Original set of headstock oilers for a South Bend 9" lathe. Oilers are part number PT2677NR1. Spring loaded lids work as they should. Strong return on springs. Threads are 5/16" diameter. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b72084a75-0x114-
|
|
|
South Bend 9" Lathe V-BELT DRIVE PULLEYS CONVERSION Machinist Tooling
South Bend 9" Lathe V-BELT DRIVE PULLEYS CONVERSION Machinist Tooling These are in gery good condition will no galling or abuse- Simple cleanup- Gearing is crisp- No chips, These South Bend components and assembly were removed from a University physics research lab and appear to have been sitting for a long time. The lathe was used by faculty only and everything is good condition with only extremely light corrosion due to dust and storage. Original uncleaned undoctored condition. I attempt to describe items as accurately as possible. And encourage you to ask specific questions regarding items. Remeber, these are used items and even an item in excellent condition can have small flaws and signs of use. I will always attempt to ship via the most reasonable means possible and will combine shipping on multiple purchases. I'll gladly entertain ... morealternative shipping methods other than those listed in the description.
|
|
|
Lantern Lathe Tool Post w Base & Ring (Atlas, LeBlond, South Bend, Clausing)
For auction is a lantern lathe tool post with a 0.59" wide opening. The base is 1.44" OD. The main body is 1.180" OD, the overall height without the clamp bolt is 4.07" The rectangular base measures 1.76" x 1.88" x 3/8" high& is counter bored for the tool post base. Also included is a second tool post with a 1.50" OD base. 1.18" OD main body, an overall height of 3.93" This second tool post has a base that would need to be turned down to fit the base for the other tool post& would need a 7/16"14 clamp screw, which is smaller than the clamp screw furnished with the other tool post.
|
|
|
ORIGINAL SOUTH BEND METAL LATHE 3C COLLET DRAW BAR & COLLET SET HWC-103N
SOUTH BEND 3C COLLET SET PART# HWC-103N& COLLETS 13-7/16" TUBE LENGTH 1/16. 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! On Jan-24-15 at 13:33:16 PST. Seller added the following information: NOTE: Tube is 13-9/16" in length. 3/4" OD.743 exact.
|
|
|
SOUTH BEND 9" 10K METAL LATHE 5-1/8" FACE PLATE DOG DRIVE 1-1/2"-8 TPI
SOUTH BEND 9"10K METAL LATHE FACE PLATE 5-1/8" DIAMETER 1-1/2"8 TPI The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b720dd18f-0x10d-
|
|
|
1" USED LATHE DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN CLAUSING LATHE
1" USED LATHE DOG PLEASE SEE THE PICTURES THE DOG IS IN ROUGH CONDITION ON THE ONE SIDE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE ... moreSHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
Anti Vibration Straight Lathe Turning Tool Holder Atlas Craftsman South Bend
Anti Vibration Straight Lathe Turning Tool Holder in excellent working condition. 5/8" X 3/8" X 6 1/8" long and takes 1/4" bits This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
|
|
|
South Bend 9 10K Metal Lathe Back Gear Asm Complete Excellent Condition
South Bend 9 10K Metal Lathe Back Gear Asm Complete Excellent Condition and you get everything you see in the pictures. This is off a South Bend 10K Just needs to be degreased This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine. All the items I sell are shipped in a box not a envelope where the item can be damaged during shipping. And I ship within 24 hours I dont just print the label and wait 3 or 4 days to take it to the post office or UPS. As you can see I buy almost as much as I sell on Ebay.
|
|
|
ORIGINAL SOUTH BEND 9" METAL LATHE CARRGIAGE SADDLE CAST
SOUTH BEND 9"10K METAL LATHE SADDLE The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b7485ec73-0x101-
|
|
|
ORIGINAL SOUTH BEND 9" 10K METAL LATHE APRON SHIFT LEVER CAM HANDLE ASSEMBLY
SOUTH BEND 9" 10K METAL LATHE APRON SHIFT LEVER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions!
|
|
|
ORIGINAL SOUTH BEND 9" 10K METAL LATHE SADDLE CARRIAGE APRON CAST MODEL A B
SOUTH BEND 9" 10K METAL LATHE CARRIAGE APRON CAST The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b748704c7-0x119-
|
|
|
SOUTH BEND 9" 10K MODEL A LATHE 42" BED QUICK CHANGE LEAD SCREW 38 5/8" LONG
ORIGINAL SOUTH BEND 9" 10K METAL LATHE MODEL A 42" LEAD SCREW 38 5/8" OAL 30-1/2" THREADED 3/4" DIAMETER 2-11/16"END SHAFT 5/8" DIAMETER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
South Bend Lathe, Clausing, Atlas, Craftsman, 5 Inch, 3 Jaw Chuck
This is a used Cushman 3 jaw scroll chuck. It's a plain back style chuck with no back plate. You'll have to machine and fit your plate to this chuck. Comes with mounting bolts and chuck key. Thanks for looking.
|
|
|
SOUTH BEND Toolroom Lathe Model 10″ x 27″ Heavy 10 With TAPER ATTACHMENT
Gold International Machinery Corporation | SOUTH BEND Toolroom Lathe Model 10″ x 27″ Heavy 10 With TAPER ATTACHMENT Our Inventory Number: 6797-440 Technical Specifications: 220V/3PH/60HZ, S/N 14231RKX16, Model# CL8187AB, Swing over bed and saddle wings: 10-1/8" Swing over cross slide: 5-7/8" Distance between centers: 27" Hole through spindle: 1-3/8" Threaded spindle nose: 2-1/4" 8, Spindle speeds: 55- 1400 RPM(12) Threading: 4- 480 TPI( 70 changes) Range of longitudinal feeds: 0007" to.0836"70) Range of cross feeds: 0003" to.0303" 70) Centers: 2MT headstock and tailstock, Motor: 1 HP, Bed length: 3-1/2 feet, Dimensions: 52"w) x 26"D) x 50"H) Estimated weight: 950 lbs, Equipped With: Thread dial, Taper attachment, Cabinet stand, 3-Jaw Chuck, 10 Assorted collets, This item is in very ... moregood condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing pro
|
|
|
ORIGINAL SOUTH BEND 9" 10K METAL LATHE TAIL-STOCK WRENCH
We are offering for your consideration an original wrench for a South Bend Lathe tail stock in very good condition. I am offering free Shipping in the U.S. lower 48. Overseas Shipping Rates Vary. Thanks for Looking. WE never charge for careful packing or shipping materials. Please see all Photos. We do not add buy it now or end our auctions early. Outside the US we will only ship Express mail we cannot track packages any other way. We have lost out on too many items to continue shipping first class or priority, please consider this in the cost of any international purchase. I do not ship to South America. Shipping in the lower 48 Continental US will be FREE with delivery confirmation plus insurance if wanted; International shipping will be calculated according to the shipping address and the feedback rating of the buyer. Pay pal or not payment ... moremust clear before item is sent. Thanks Connie& Dave
|
|
|
EXCELLENT SOUTH BEND HEAVY10 TEN LATHE APRON COMPLETE
South Bend Lathe 10 Heavy This came off of a lathe that came in. Its a bit dirty as you can see but overall looks to be in nice shape. Thank you for your Business! shipping will be 18.00! God Bless!
|
|
|
Original South Bend Metal Lathe Light 10 10K Headstock Cover Guard PT2577K4
Original South Bend Metal Lathe Light 10 10K Headstock Cover Guard PT2577K4 in Excellent Working Condition with no cracks or repairs This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
|
|
|
NICE SOUTH BEND 9-10K LATHE BELT TENSION LEVER USED 9" MODEL A
Nice used belt tension lever off a South Bend Model A 9" lathe. I believe it also fits the 9/10K models but please confirm prior to purchase. See my other items for more south bend parts and tooling. I am always happy to combine shipping. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b770c19e9-0x110-
|
|
|
ORIGINAL SOUTH BEND 9"/10k METAL LATHE 80T TOOTH IDLER OR CHANGE GEAR
Original South Bend 80T idler/change gear. It's in good condition as you can see. See my other items for more south bend parts/tooling.
|
|
|
ORIGINAL SOUTH BEND 9"/10K METAL LATHE 48T TOOTH IDLER CHANGE GEAR
Original South Bend 48T idler/change gear. It's in excellent condition. See my other items for more south bend parts/tooling. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b770c18fc-0x113-
|
|
|
ORIGINAL SOUTH BEND 9"/10k METAL LATHE 16T TOOTH IDLER OR CHANGE GEAR
Original South Bend 16T idler/change gear. It's in good condition. See my other items for more south bend parts/tooling. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b770c19af-0x102-
|
|
|
atlas lathe,south bend, logan, lathe collet rod,3AT collet
used. Collet pull rod, i think it's atlas 10 or 12 inch lathe, not sure. comes as pictured with 3AT collets. rod is 11-5/16 inch's long to the taper as pictured. It is 3/4 diameter. collets are 3/8,5/16,1/4, 3/16 inch.
|
|
|
Vintage 1940 39th Edition- How To Run A Lathe Book-South Bend Lathe Works
Vintage 1940 39th Edition- How To Run A Lathe Book-South Bend Lathe Works. The cover has wear and has been taped. Pages look good and have some staining. PayPal Only-Payment expected within two days of purchase unless other arrangements have been made with seller. Item will ship within two days of payment. If you would like a different shipping than what is listed please contact me and I can put it on the listing. I will also combine shipping to save cost just contact me. USPS Priority mail now comes with insurance for up to $50. International buyers. You are responsible for all customs fees and duty. I use the global shipping program which is pitney bowes and they charge a brokerage fee which is up to you to pay. If you wish not to use this then send me a message and I will provide alternate shipping through USPS. As announced this spring. ... moreTo reduce unpaid items eligible fixed price and auction-style listings purchased with Buy It Now will remain for sale unless the buyer pays right away. That means buyers must first add items to their eBay Shopping Cart to purchase multiple items with a single payment. Items I sell are old. Antique, vintage or collectible. Some will have minor defects due to the age but that is what makes them so quaint. Please read carefully and check out all pictures. Unless otherwise stated, items are either vintage or used and they are sold AS IS. I do my best to describe items accurately and I will list any major flaws in the item description. If you have concerns about an item, please feel free to contact me before buying and I will gladly answer any questions you have. Check out my! Be sure to add me to your! By adding my eBay Store to your Favorites.
|
|
|
machinist tools,Brown & Sharpe 215 Disc micrometers,south bend lathe
Brown& Sharpe 215 disc micrometers.Work well 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b798e8373-0x10b-
|
|
|
Dead Center Lathe for Machinist Gunsmith Morse Taper #3 South Bend 9 10 13
One lot of five dead centers. I believe all these to be morse#3 taper. Three are Cleveland brand. The other two are not marked. Scale is not a part of this listing. Retiring and will be selling a lot of machinist tools. PayPal only I do not ship outside the USA Thanks for looking.
|
|
|
ORIGINAL SOUTH BEND 9" 10K METAL LATHE 40 & 44 TOOTH THREADING CHANGE GEARS
Original 40& 44 tooth change gears for a 9" or 10K South Bend lathe. Single keyed 9/16" bore. 3/8" thick. Pitting noted to both gears, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL SOUTH BEND 9" METAL LATHE 32 TOOTH THREADING CHANGE GEAR
Original 32 tooth change gear for a 9" South Bend lathe. Single keyed 9/16" bore. 1 7/8" outer diameter, 3/8" thick. Pitting noted to one side of gear. Teeth are in excellent condition. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend 9" Metal Lathe Cross Slide Feed Nut
South Bend 9" Metal Lathe Cross Slide Feed Nut The cross slide feed nut is in the fine condition with some wear. The threads are in fine condition with some wear. It has some wear on the side and top edge. Comes with a screw. 7/16" x 10 TPI left hand threads. 11/16" diameter neck. See pictures. It is off a South Bend 9" Model A metal lathe. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4.00 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
South Bend 9" Metal Lathe Saddle Crossfeed Screw with Handle & Dial Model A
South Bend 9" Metal Lathe Saddle Crossfeed Screw with Handle& Dial Model A The saddle cross feed screw is in fine condition with some wear. The screw threads and drive gear are in fine condition with some wear. The dial indicator markings are legible with some wear. A few of the indicator marks are worn between the 20 and 30 marks. See pictures. Comes with handle and dial. It is o ff a South Bend 9" Model A metal lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. ... morePosted with
|
|
|
4 ORIGINAL BRASS SOUTH BEND METAL LATHE OILERS & SCREWS
4 ORIGINAL BRASS SOUTH BEND METAL LATHE OILERS& SCREWS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
South Bend 9" & 10" Lathe Carriage Stop for Machinist Metal Lathe Southbend
Item for sale is(1) South Bend 9" 10" Lathe Carriage Stop. Used. In very good condition. Factory original, not a reproduction. Shipped FREE in USA. Check out my! Be sure to add me to your!
|
|
|
South Bend metal shaper with base milling vise lathe tool holder 7 in south bend
South Bend metal shaper with base milling vise lathe tool holder 7 in south bend Buyer is responsible all shipping cost We can palletize per your specification.
|
|
|
machinist tool,Pratt 4 jaw chuck,south bend lathe
Pratt 6" 4 jaw chuck.Made in England. Some grime but nice and tight and in nice condition
|
|
|
Vintage 1934 catalog: MOTOR MECHANICS' HAND BOOK no. 33, South Bend Lathe Works
Welcome to another Great item from SYOTTOYS and thanks for stopping by. After you have looked at this one, why not sit back, grab your favorite drink and spend some time checking out all the wonderful things I have to offer. just click above. NOTE: i will always combine items to save you shipping cost. but I don't end auctions early. And offers will be ignored if they are not reasonable. DESCRIPTION OF ITEM THIS ITEM IS-from a large stash of early paper. As you see it, most is from the 1800's, there is some very cool stuff. you are considering the item shown above. This was distributed by C. C. Goodwin. Augusta, Maine. Has some wear and tear. AS SHOWN. USE EBAYS ZOOM IN FEATURE TO GET A GREAT LOOK AT THE ITEM UP CLOSE, and email me any questions. Please. TERMS AND CONDITIONS Paypal users must be verified. And have a confirmed address. ... morePayment must be received within 5 days. Or sale is voided, and item may be relisted. Shipping is usually done by USPS or Fed Ex. I may switch shipping carrier and methods at any time. Seller assumes no responsibility with regards to loss. Damage of property, or personal injury. Bidder must be 18 years or older to participate in this auction. By placing a bid. You are accepting these terms and conditions. LOCATION- box( SUN PACIFIC- C bag) Powered by The free listing tool. List your items fast and easy and manage your
|
|
|
Cushman Chuck for South Bend 9 inch or 10K Lathe, 3 jaw, 6" diameter
A very nice used chuck. The jaws are quite tight in their slots. And appear almost new. The chuck only has the inside jaws(the set most often used)
|
|
|
5" diameter Faceplate for South Bend 9 inch or 10k Lathe
A lightly used faceplate for a South Bend 9 inch or 10 light lathe. It has a 1.5 x 8 thread.
|
|
|
machinist tool,milling machine handle,south bend lathe
Machine handle with 1/2" square hole.Made by fairmount
|
|
|
machinist tools,lathe boring bars,south bend lathe
4) lathe boring bars. 12" long x 1-1/4" shank.9-1/4" x 1-1/4" shank,7" x 1" shank(micrometer feed style)7-1/2 x 1-5/8(with sleeve)
|
|
|
machinist tool,assorted lathe tools,south bend lathe
Large assortment of lathe tool bits
|
|
|
South Bend No 253 3/8" Wrench For Lathe Shaper Toolpost Mill Southbend
Item for sale is(1) South Bend No 253 3/8" Wrench. The wrench is USED. But in EXCELLENT Condition. Shipped free in the USA. Check out my! Be sure to add me to your!
|
|
|
LOT OF 50 +MACHINIST LATHE TOOL BITS HSS CARBIDE TIPPED SOUTH BEND ATLAS USED
UP FOR BID IS A LOT OF 53Pcs USED CUTTING TOOL BITS FROM 5/16' TO 5/8' AND 2 PARTING BLADES. THEY CAME WITH A 12' CRAFTSMAN LATHE. THEY STILL CAN BE RESHARPENED AND USED. SELLING AS IS YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. IF YOU ARE PLANING TO BUY MORE THAN ONE ITEM PLEASE DO NOT PAY UNTIL I SEND YOU AN INVOICE WITH COMBINE SHIPPING. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: Package is about 6.00 pounds. And will be shipped from zip 33073. The least expensive method will ... morebe used, unless you request a different method and pay the difference. I charge what it costs me-nothing extra. I will combine shipping to save you money if you buy more items within a week-as long as they can go together in the same box. I ship most items the next weekday after receiving payment. QUESTIONS: PHONE(954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
|
|
|
SOUTH BEND LATHE HEAVY 10" COMPOUND REST w LARGE DIAL 0-100 attachment part tool
CHECK ALL PHOTOS& READ ENTIRE DESCRIPTION PRIOR TO BUYING. FEEL FREE TO ASK QUESTIONS- SOUTH BEND LATHE HEAVY 10" COMPOUND REST with LARGE DIAL 0-100 BRAND: SOUTH BEND LATHE. MADE IN USA. MODEL: STAMPED: C-102R G WAS PARTED OFF A HEAVY 10" SOUTHBEND LATHE. WILL NOT FIT 10-K LATHE) DIMENSIONS: 1-5/8" DIA. PLUG/BASE. FEATURES: 0-100 LARGE DIAL READING. INCREMENTS OF 10) SATIN FINISH. NOTE: ITEM HAS BEEN RE-PAINTED BY PREVIOUS OWNER. ALL ITEMS ARE USED. OPERATES SMOOTHLY. PLEASE LOOK AT ALL PHOTOS FOR MORE DETAILS AND CONDITIONING. SHIPPING OPTIONS: USPS PRIORITY SHIPPING: $12.00(USA ONLY) NO INTERNATIONAL OR CANADA SHIPPING)
|
|
|
38T Spindle Gear for 13" South Bend Lathe
38T Spindle Gear for 13" South Bend Lathe 2 1/4" OD. 1 7/8" bore with 3/16" key way, 63/64" face width, minor wear, no broken or missing teeth. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
72T Idler Gear for Lathe, South Bend, Logan, Sheldon,
Steel 72T Idler Gear for Lathe After market(maybe Boston) 4 5/8" OD, 1/2" face width, 3/4" smooth bore, 16 DP, 5/8" wide hub, minor wear, no broken or missing teeth. No international. Ask questions before bidding, always happy to combine shipping when possible. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b80fcfc65-0x110-
|
|
|
Two Wiper Retainers and Wipers for13" South Bend Lathe
Two Wiper Retainers and Wipers#s PT58T1 and PT57T1(one left and one right) for 13" South Bend Lathe Wipers are used and somewhat hard. Includes screws. No international. Ask questions before bidding, always happy to combine shipping when possible. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b80fcfcc6-0x101-
|
|
|
Bull Gear Plunger Guard for13" South Bend Lathe
Aluminum Bull Gear Plunger Guard#AS362T2 for 13" South Bend Lathe No cracks or repairs. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Chip Pan Brackets for13" South Bend Lathe
Chip Pan Brackets#PT467TH1 for 13" South Bend Lathe No cracks or repairs. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
Lead Screw Support Bearing for13" South Bend Lathe
Lead Screw Support Bearing#AS5T1 for 13" South Bend Lathe Babbitt poured with 11/16" bore. Includes oil cup, minor wear, no cracks or repairs. No international. Ask questions before bidding, always happy to combine shipping when possible.
|
|
|
HOW TO RUN A LATHE MANUAL SOUTH BEND MACHINIST INDIANA
Hello- this is a great shop manual for the machinist. it is offered by South Bend. But it applies to all similar machines/ lathes. has great illustrations- and also decimal tables, etc. 128 PAGES THANK YOU! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b80fdb47e-0x10a-
|
|
|
MACHINIST TOOLS LATHE MILL Rocker Lantern Style Lathe Tool Post for South Bend
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. It is missing the rocker. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO ... moreSATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. 1 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b80fdf151-0x118-
|
|
|
VINTAGE ARMSTRONG 6 POINT TOOLPOST/APRON LOCK WRENCH SOUTH BEND ATLAS LATHE 9 10
UP FOR BID IS A VINTAGE ARMSTRONG 6 POINT TOOLPOST/APRON LOCK WRENCH 3/8' NO. 36-612 FOR ATLAS CRAFTSMAN SOUTH BEND LATHES 9 10 12' IN EXCELLENT CONDITION. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I also accept cashier's check. FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $2.95 USPS FIRST CLASS Mail with Delivery Confirmation. I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together ... morein the same box. QUESTIONS: PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
|
|
|
South Bend Lathe Heavy 10 Headstock Spindle Sleeve to Morse Taper #2
South Bend Lathe Heavy 10 Headstock Spindle Sleeve to Morse Taper#2
|
|
|
VINTAGE South Bend 1 A COLLET 1/2” LATHE MACHINIST TOOL
South Bend Collet 1/2" Round Has some Discoloration
|
|
|
South Bend Lathe Belt Tension Lever, Turnbuckle, Rods 9"
This auction is for the flat belt tension lever. Turnbuckle, threaded rods from an old 9" South Bend Lathe with the horizontal drive set up. The parts are in good shape for their age. The threaded portions of the rods have some nicks in them but they function just fine, the turnbuckle can be rotated easily with fingers when assembled throughout the entire adjustment range. When the adjuster is fully closed the length is approx 12" O/C when opened with 3/8" engagement left of both rods in turnbuckle, the length is approx 14" O/C. You will also get the clevis pin to attach the lever to the headstock of the lathe. Good Luck!
|
|
|
South Bend Nordic 25 Engine Lathe 25 x 118
South Bend Nordic 25 Engine Lathe. This is a very versatile Lathe and is especially well suited for shaft work with 18 spindle speeds. Inch threading from 128 TPI to one thread in about 4" or in practice a spiral groove. Metric threads can be turned without changing any gears. CAPACITY: 25-3/8" Swing Over Bed; 34" in Gap; 15-3/4" over Cross Slide Center Distance: 118" SPINDLE: D1-8" Nose with 2-13/16" Spindle Hole Motor HP: 15 HP Speed Range: 18 Speeds) 18- 1400 RPM CHUCKS: 18" Diameter 4 Jaw; 12" 3 Jaw Threading: Pitch Thread Range(96 Threads) 128 TPI to 35/128 TPI Metric Pitch Thread Range(89 Threads) 0.625- 128 mm Equipped With: Steady Rest(12" Tailstock MT5 with 8" Stroke. Quick Change Tool Post This lathe is in good operating condition and we have owned since 1994. It is under power ... moreand available for your inspection near Huntington. WV. Buyer is responsible for loading and transportation. We will assist by draining fluids, and moving it to front door of shop. We do not have a loading dock. Estimated shipping Wt: 8.000 Lb Length: 15 Ft. Depth: 4 Ft Deposit of $1000.00 due at time of sale via PayPal or Check. Balance due in cash or bank check at or before pickup.
|
|
|
Book How To Run A Lathe 41st Edition 1941 O'Brien South Bend Machinist Vintage
1941 version of the classic HTRL from South Bend. 128 pages. Near MINT condition. NO greasy fingerprints, no stains or water damage, no names or extra markings. This copy never made it to the shop, it's in truly collectible condition.
|
|
|
South Bend Magnaturn 612 CNC Lathe
Runs on 120VAC single phase. This machine has seen little use having sat in a clean lab at Hopkins most of its life. The PC is running Windows 98 with the original control software running in a DOS shell. Includes original stand. Has pneumatic closer for the collet setup. Comes with the original(hard to find) collets and a 3 jaw chuck. All are in excellent shape. Live center and one tool holder included. Machine runs great. Manuals included.
|
|
|
machinist tool,Kennemetal tool holders,south bend lathe
12) tool holders. Some say Kennemetal some have no name. Most are 1"x1" and 1"x1-1/4"
|
|
|
machinist tool,metal lathe micrometer stop,south bend lathe
Nice micrometer stop from unknown lathe.Well made. Widest part of the v is an inch and it's right around 2-1/4" from the center of the v to the center of the stop
|
|
|
South Bend 9" Metal Lathe Bare Carriage Saddle Cast & Gib with Retainers Model A
South Bend 9" Metal Lathe Bare Carriage Saddle Cast& Gib with Retainers Model A The carriage saddle cast is in fine condition with some wear. Comes with retainers and used wipers. Also comes with gib and bolts. See pictures. It is o ff a South Bend 9" Model A metal lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
South Bend 9 10K Atlas Craftsman Lathe MT 2 Tailstock Chuck and Center
This is a real nice Jacobs tailstock chuck and South Bend center.Both MT2. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
8 3/8" Face Plate * Original South Bend Lathe 13 Heavy 10 L * 2 1/4-8 Thread
Please check the photos to verify condition and correctness of item. I will combine shipping whenever possible. Email me to request an invoice before paying for multiple items. Please check my other listings. Payment must be made within 2 days of auction close. I will appreciate positive feedback after you are satisfied with the item. I will then return good feedback. If you feel the item is not as described please let me know before leaving feedback. I want to work with you to resolve any problems. Email me any questions you have before bidding. Thanks for looking.
|
|
|
Aloris CXA6 tool holder,south bend lathe
Aloris CXA6 deep tool holder.Missing knurled nut.
|
|
|
Original South Bend 9" Lathe Headstock Bull Quill and Safety Gear Guards #2
Original Cast Iron South Bend 9" Lathe Headstock Bull Quill and Safety Gear Guards in excellent condition just greasy. If you need a specific lathe part that I don't already have listed message me and I will get back to you on whether I have it or not. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine. All the items I sell are shipped in a box not a envelope where the item can be damaged during shipping. And I ship within 24 hours I dont just print the label and wait 3 or 4 days to take it to the post office or UPS. As you can see I buy almost as much as I sell on Ebay.
|
|
|
Original South Bend 9" A B or C 10K Lathe Bull Gear 15N1 Excellent #2
Original South Bend 9" A B or C 10K Bull Gear AS15NK1 in excellent working condition. If you need a specific lathe part that I don't already have listed message me and I will get back to you on whether I have it or not. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine. All the items I sell are shipped in a box not a envelope where the item can be damaged during shipping. And I ship within 24 hours I dont just print the label and wait 3 or 4 days to take it to the post office or UPS. As you can see I buy almost as much as I sell on Ebay.
|
|
|
South bend lathe 10 banjo gear / idler gear 80 tooth , 3/4" bore
No broken or chipped teeth. In very good condition
|
|
|
South bend lathe 9"/10k 54 tooth change gear # 32K56NK1
No broken or chipped teeth. It was a compound gear. It is missing shaft and 18 tooth gear
|
|
|
South bend 9" 10k lathe Cone Gear set 18-28t Model A Quick change gearbox
Set of cone gears. No broken or chipped teeth. 18t. 20t, 22t, 23t, 24t, 26t, 28t, and pin. 28 tooth shows significant wear, 24 tooth has a swirl on the face but teeth are fine. I have another 28 tooth not included in this listing in much better condition but it doesn't have pin alignment hole. I would exchange for this listings 28 tooth if you would prefer.
|
|
|
South bend lathe 9" 10k Apron clutch sleeve model A + B
No broken or chipped teeth. Does show some wear in the gear teeth
|
|
|
TAILSTOCK CLAMP NO.126-054 FOR A LARGER LATHE SOUTH BEND LOGAN CLAUSING
UP FOR SALE IS A TAILSTOCK CLAMP FOR A LARGER LATHE. DO NOT KNOW THE SIZE OF THE LATHE. IT IS IN EXCELLENT CONDITION. PART NO.126-054 YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $5.35 USPS PRIORITY Mail with Delivery Confirmation. I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME ... morePHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
|
|
|
ORIGINAL SOUTH BEND 9" 10K METAL LATHE 32T TOOTH THREADING CHANGE GEAR
SOUTH BEND 9" 10K METAL LATHE 32 TOOTH CHANGE GEAR The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions!
|
|
|
How To Run A Lathe 39th Edition J.J. O'Brien South Bend Lathe Works 1940
40th Edition J.J. O'Brien South Bend Lathe Works Check out the other Great Deals in our eBay Store! Any questions please ask: Shipping to Alaska and Hawaii may be higher. Please read disclaimer below. For International Bidders: The USPS has discontinued Economy Surface shipping. Prices have increased 300% Please contact me for price quote. Payment Due in 7 days or item may be re-listed and non-paying bidder issued. Some books may have the previous owner's name inside as well as price stickers. Rounded corners, spine/cover creases, page foxing, dog ears& normal shelf wear, etc. These items are used and due to the age in most cases vintage stuff. We try to describe as best we can. Most items I have collected come from estate sales. Garage and yard sales over the years. I do not know history of any items. I do simple tests to see ... moreif an item works. If I find something is non-working or broken, I will list as such. After something leaves my hands, we have no control over it so I really just put sold as-is for everything. We do not sell"junk" stuff as new. We do sell broken items as for parts or repair as someone may need these and get a great deal. We used to take returns but the few bad eggs have killed that policy. Returns with missing parts. Or looked as if it was dropped from a shelf and the worst getting back stuff we did not sell. Most item being used and vintage have light scuffs or scratches. Any major exterior damage will be noted. Almost all specs I list are from researching websites. But with no manuals I can not guarantee or verify these are correct numbers. I pack all items as if I would want them sent to me. Most items are sent FEDEX with a stated value All items are sold as-is, no returns. I work a regular 40 hour/week job on TOP of eBay. eBay is a hobby) So please take this into consideration.Check our feedback history.
|
|
|
KDK Tool Post 100 for Lathe Machinist South Bend
One KDK 100 Series Tool Post. My personal tool and engraved with my name. Retiring and will be selling a lot of machinist tools. PayPal only I do not ship outside the USA Thanks for looking.
|
|
|
ATLAS-SOUTH BEND-LOGAN-CRAFTSMAN LATHE TOOL HOLDER # 2033 STRAIGHT 3/16 TOOL
THIS IS A NICE SMALL CRAFTSMAN STRAIGHT LATHE 3/16 BIT HOLDER#2033 5/16 X 5/8 5 X 5/16 LOOKS GREAT DOES NOT SHOW ABUSE.WILL COMBINE SHIPPING.THANKS FOR LOOKING AND PLEASE CHECK MY STORE FOR MORE TOOL HOLDERS.
|
|
|
ATLAS-SOUTH BEND-LOGAN-CRAFTSMAN LATHE STRAIGHT TOOL HOLDER #2010-S
THIS IS A NICE SMALL LATHE STRAIGHT ARMSTRONG#2010-S. 3/8 X 3/4 1/4 INCH TOOL.DOES NOT SHOW ABUSE.WILL COMBINE SHIPPING.THANKS FOR LOOKING AND PLEASE CHECK MY STORE FOR MORE TOOL HOLDERS.
|
|
|
ATLAS-SOUTH BEND-LOGAN-CRAFTSMAN LATHE TOOL HOLDER-CUT-OFF#20
THIS IS A NICE SMALL LATHE CUT-OFF TOOL.MADE BY ARMSTRONG#20 3/8 X 15/16. LOOKS GREAT DOES NOT SHOW ABUSE.WILL COMBINE SHIPPING.THANKS FOR LOOKING AND PLEASE CHECK MY STORE FOR MORE TOOL HOLDERS.
|
|
|
Vintage 1936 South Bend 9" X 36" Lathe
1936 South Bend bench top Lathe Serial# 71590 Works fine just in the way in my home Must be picked up or buyer can arrange for a freight to come pick it up. Sold as is used in working condition. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b86c5c399-0x103-
|
|
|
South Bend Heavy 10 Lathe 2 1/4-8 TPI Slotted Faceplate
South Bend Heavy 10 lathe slotted faceplate threaded 2 1/4-8 TPI and is 8 3/8" in diameter. Inspection in my Aberdeen. NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
South Bend 9" Metal Lathe Bull Gear 76 Tooth with Plunger Bullgear
South Bend 9" Metal Lathe Bull Gear 76 Tooth with Plunger Bullgear The bull gear is in fine condition with some wear. Some of the gear teeth show some wear. It works fine. See pictures. It has a 1 5/8" center hole with a 3/16" keyway. It is o ff a South Bend 9" metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6.50 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
South Bend 9" Metal Lathe Lead Screw Front Bracket Support w/ 2 Screws Leadscrew
South Bend 9" Metal Lathe Lead Screw Front Bracket Support w/ 2 Screws Leadscrew It is in fine condition with some wear. See pictures. It has a 3/4" center hole with a 3/16" keyway. Comes with two screws and keyway felt. It is o ff a South Bend 9" metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6.50 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
South Bend Logan Lathe 3C Collet Assortment Lot
3C round sizes. 1/16, 3/32, 7/64, 1/8, 5/32, 3/16 round, 3/16 square, 7/32, 1/4, three 5/16, 9/32, 11/32, three 13/32, 3/8, three 7/16, Comes as shown.
|
|
|
South Bend Logan Rivett Lathe 1A Collet Assortment Lot
Rivett 1A round sizes. Two 1/16, 5/32, 3/16, two 1/4, 7/16, 1/2, Comes as shown.
|
|
|
Atlas Logan South Bend 9" 10" Lathe Threading Tool with Wrench
Ace brand#2050 3/8" X 3/4" shank. Stock Photo)
|
|
|
Atlas Logan South Bend 9" 10" Lathe Boring Bar Holder
Ace brand#2030 3/8" X 5/8" shank. Holds 3/8" dia. boring bars. Stock Photo)
|
|
|
Atlas Logan South Bend 9" 10" Lathe Left Hand Parting Tool Holder
Atlas brand 3/8" X 7/8" shank. Holds 9/16" blades. Stock Photo) 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b883c7dbe-0x10e-
|
|
|
Atlas Logan South Bend 9" 10" Lathe Straight Turning Tool Holder
Amstrong brand#0-S. 3/8" X 7/8" shank. Holds 3/16" bits. Stock Photo) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14b883c7d06-0x105-
|
|
|
Atlas Craftsman Logan South Bend 9" 10" Lathe Left Hand Turning Tool Holder
Williams brand#0-L. 3/8" X 7/8" shank. Holds 3/16" bits. Stock Photo)
|
|
|
Atlas Craftsman Logan South Bend 9" 10" Lathe Right Turning Tool Holder
Armstrong brand#0-R. 3/8" X 7/8" shank. Holds 3/16" bits. Stock Photo)
|
|
|
Atlas Logan South Bend 10" Lathe MT2 Crotch Center
Morse taper#2 shank. Comes as shown.
|
|
|
Vintage 1934 Book How To Run A Lathe 31st Edition South Bend 160 Pages Excellent
You are bidding on a Vintage 1934 Book How To Run A Lathe 31st Edition South Bend 160 Pages Excellent. This 5 1/4" wide by 8" tall by 3/8" thick. Softcover book was well used by my uncle in 1935-1936 when he was a senior in high school for his shop class. Since then, it has been tucked away in a box. There are no missing pages, stains or scribbles beyond the title page and no odors, both covers have creases and are bumped. The top 1 1/4" of the spline is missing the this book is still tightly bound. Overall, a very informative lathe book to add to your library, you will not be disappointed. Thank you for viewing this item.
|
|