In 
 
Order by: 
Available to: 
Price: 
 - 
$
6.33
Buy It Now
$0 Shipping
Condition: New
Location: Alvord,IA,USA
South Bend Lathe flat drive belt custom cut Important Note: If you do not provide a belt length at time of purchase you will be shipped the default length ... moreof 70" Use ebay's message system or use the"notes to seller" to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide Everything we sell is in our warehouse Questions call: 260-723-4946
$
29.99
Buy It Now
$5.99 Shipping
Condition: Used
Location: Middlebury,IN,USA
$
45
3d 13h 4m 59s
0 bids
Free Shipping
Condition: Used
Location: Orinda,CA,USA
The Following Item is for sale 1- VINTAGE South Bend Lathe Works How TO Run A ALthe 55th Edition 1958. Please email any questions before bidding. Will ... morecall is available. Thanks for your interest in this item and Good Luck Bidding! All International Items Require Priority Mail no acceptions for International buyers due to insurance requirements. Powered by SixBit's eCommerce Solution
$
225
Buy It Now
$0 Shipping
Condition: Used
Location: Montebello,CA,USA
$
57.88
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
4.97
Buy It Now
$1.07 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
4.97
Buy It Now
$1.07 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
89.99
Buy It Now
Free Shipping
Condition: Used
Location: Morris Plains,NJ,USA
$
15
Buy It Now
$0 Shipping
Condition: New
Location: Nixa,MO,USA
Untitled Document Free. Fast Shipping Every Business Day! South Bend No. 44 Showing 150 Shop Kinks Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 17. This is a reproduction. Not a photocopy, of a 1927 South Bend Handbook No. 44 Showing 150 Shop Kinks for the mechanic. This is a nice copy, but the original was printed on newspaper material and not a slick finished paper. The 128 set ups on the lathe are very interesting, and can be used on today's machines. Plus, there is other useful information on setting up the unusual South Bend attachments. The object of this Handbook is to show a few of the various sizes and types of South Bend Back Geared Screw Cutting Lathes and the application of these Lathes in the manufacturing plant. Machine shop and in industry in general. It also illustrates a varied line of tools and attachments for the Screw Cutting Lathe that are so necessary for the number of different classes of work that are done in the shops of today. Contents: 9-inch Special Bench Lathes.4-23. 9-inch Junior Bench Lathes.6-23 9-inch Quick Change Gear Lathes.8. 9-inch Standard Change Gear Lathes.8. 1 1-inch Quick Change Gear Lathes.10. 1 1-inch Standard Change Gear Lathes.10. 1 1-inch Special Bench Lathes.23-24. 1 1-inch Junior Bench Lathes.23-24. 13-inch Quick Change Gear Lathes.12. 13-inch Standard Change Gear Lathes.12. 15-inch Quick Change Gear Lathes.12. 1 5-inch Standard Change Gear Lathes.12. 16-inch Quick Change Gear Lathes.14. 16-inch Standard Change Gear Lathes.14. 1 8-inch Quick Change Gear Lathes.16. 18-inch Standard Change Gear Lathes.
$
69.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ivoryton,CT,USA
$
24.48
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
45
Buy It Now
$0 Shipping
Condition: Used
Location: La Habra,CA,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Nashville,TN,USA
$
118.95
Buy It Now
$23 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
40
Buy It Now
$0 Shipping
Condition: Used
Location: La Habra,CA,USA
SOUTH BEND 9" 10K METAL LATHE HEADSTOCK SPINDLE ASSEMBLY The photos are accurate to each description and exact to what you will receive. Please feel ... morefree to email with any questions!
$
149.99
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
30
Buy It Now
$0 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
40
Buy It Now
$0 Shipping
Condition: New
Location: Nixa,MO,USA
Untitled Document Free. Fast Shipping Every Business Day! South Bend 14-Inch Gear Head Parts List and Manual Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 50. This is a reproduction. Not a photocopy, of an original South Bend 14-Inch Gear Head Parts List and Manual. This manual contains information on lubrication, adjustments, maintenance, and controls as well as a complete parts list with exploded view diagrams. This manual is very complete for a South Bend, because all of the attachments and lathe parts are for this model only. The nice thing is they put them all in the same manual, unlike the 9-24 series. The manual section is very detailed and important, because of unique things on this lathe. The parts section is very detailed and laid out in a nice arrangement. I wish all of the South Bends were setup this way. Contents: General Information.1-4. Operations.5-7. Lubrication.8-9. Maintenance.10-12. Base and Bed.13-15. Drive Unit.16-19. Headstock.20-25. Gear Box.26-29. Apron.30-33. Saddle.34&35. Compound Rest.36&37. Tailstock.38&39. Taper Attachment.40&41. Follower and Steady Rest.42. Turret.43-47. Electrical.48-50. Picture Inside: Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly
$
89.95
Buy It Now
$10.65 Shipping
Condition: New
Location: Danville,NH,USA
$
139.99
Buy It Now
$16.5 Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
4.97
Buy It Now
$1.07 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
50.99
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
17.5
Buy It Now
$0 Shipping
Condition: New
Location: Nixa,MO,USA
Untitled Document Free. Fast Shipping Every Business Day! South Bend How to Cut Screw Threads in the Lathe Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 20. This is a reproduction. Not a photocopy, of an original South Bend How to Cut Screw Threads in the Lathe Manual. Contents: Introduction.1&2 Terms.3 Screw Thread Tables.4 Gear Setup.5 Compound Gearing.6 Thread Cutting Tools.7 Tool Positions.8 Compound Rest Position.9 Thread Cutting Stop.10 First Cut.11 Oiling.12 Thread Dial.13 Finishing the End of a Threaded Piece.14 Cutting Multiple Screw Threads.15 Cutting Left Hand Screw Threads.15 Metric Screw Threads.16 Mounting Work.17 Adjusting Levers of Gear Box.18 Calculate Change Gears.19 Using Taps and Dies.20 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my
$
300
Buy It Now
$10 Shipping
Condition: Used
Location: Rochester,NY,USA
$
40
Buy It Now
$12 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
14
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Goddard,KS,USA
$
4.75
Buy It Now
$1.97 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
16.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville,TN,USA
$
89.99
Buy It Now
$12.55 Shipping
Condition: Used
Location: Bergenfield,NJ,USA
$
25
Buy It Now
$0 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
19.75
Buy It Now
$0 Shipping
Condition: New
Location: Franklin,OH,USA
$
199.99
Buy It Now
$39.99 Shipping
Condition: Used
Location: Seneca,SC,USA
$
40
Buy It Now
$0 Shipping
Condition: Used
Location: Mason,OH,USA
$
158
Buy It Now
$20 Shipping
Condition: New
Location: Schaumburg,IL,USA
$
35
Buy It Now
$8 Shipping
Condition: New – Open box
Location: Mahwah,NJ,USA
$
5.98
Buy It Now
$1.97 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
300
Buy It Now
Free Shipping
Condition: Used
Location: Chadds Ford,PA,USA
$
85
Buy It Now
Free Shipping
Condition: Used
Location: Elkin,NC,USA
$
3.98
Buy It Now
$1.97 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
40
Buy It Now
$12 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
49.99
Buy It Now
$19.95 Shipping
Condition: Used
Location: Bloomington,CA,USA
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Ivoryton,CT,USA
$
99
Buy It Now
$9.95 Shipping
Condition: Used
Location: Buffalo,NY,USA
$
499
Buy It Now
$25 Shipping
Condition: Used
Location: Portland,CT,USA
$
16
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Goddard,KS,USA
$
69.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ivoryton,CT,USA
$
115
Buy It Now
$0 Shipping
Condition: Used
Location: La Habra,CA,USA
$
109
Buy It Now
$13 Shipping
Condition: New
Location: Schaumburg,IL,USA
$
49.5
Buy It Now
$0 Shipping
Condition: New
Location: Nixa,MO,USA
$
6.97
Buy It Now
$1.97 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
15.95
Buy It Now
$5.65 Shipping
Condition: New – Open box
Location: Mebane,NC,USA
How to Run a Lathe: How to Erect. Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19. By O’BRIEN BROTHERS J.J. ... moreO’Brien and M.W. O’Brien, originally published by South Bend Lathe Works, South Bend, Ind. 1919. Reproduced in 2014 by Nation Builder Books, Mebane, NC. 5¼ x 8 paperback, 80 pages. Please note this is a new. Photocopied reproduction, NOT AN ORIGINAL. The accompanying pictures were scanned from a reproduction, not the original. And please note this is the 1919 edition, NOT the more popular 1942 edition. Founded in 1906 in South Bend. Indiana, South Bend Lathe Works, at one time accounted for almost half all metalworking lathes sold domestically. One of SBLW’s keys to its market dominance was SBLW’s painstaking effort to provide clear, well-illustrated, low-cost instructional materials on how to set up and run their tools, and how to use SBLW tools to perform a wide array of basic and advanced machining operations. The most widely known and sought after of SBLW’s publications was its classic pamphlet How to Run a Lathe. First published in 1914. How to Run a Lathe. was updated and reissued annually for decades. And has often been reprinted. The 1942 edition, in particular, is highly regarded as a thorough introduction to metal cutting lathe work, and is usually the first book placed in the hands of beginning students. The 1942 edition, which ran to 128 pages, was a mainstay of the Lindsay Technical Books catalog for two decades, and is still in wide demand. This edition is so dissimilar from the 1942 edition that they really should be considered separate books. Spindle speeds increased from belt-driven 150 to 275 rpm in the 1910s. To a range of 274 to 579 rpm using electric motors in the 1940s. The metallurgy of cutting tools had advanced considerably in the two decades between these two editions, allowing, for example, a doubling of cutting speed for annealed tool steel from 25 fpm in 1919, to 50 fpm in 1942. The cutting speed for machine steel went from 35 fpm
$
26.95
Buy It Now
$0 Shipping
Condition: Used
Location: Neptune,NJ,USA
$
28
Buy It Now
$0 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
32
Buy It Now
$0 Shipping
Condition: Used
Location: Middletown,NY,USA
$
16.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville,TN,USA
$
5.98
Buy It Now
$1.97 Shipping
Condition: Seller refurbished
Location: New York,NY,USA
$
69.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Seneca,SC,USA
$
185
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Pennsburg,PA,USA
$
33
Buy It Now
$0 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
75
Buy It Now
$0 Shipping
Condition: Used
Location: Mahwah,NJ,USA
 In 

Past Items  
 
South Bend 10L Lathe Apron Rack Pinion Shaft Part# PT204R1 Heavy Ten This listing is for a South Bend 10L Lathe Apron Rack Pinion Shaft- Part# PT204R1, as shown in the photos. This is the larger shaft with gear that makes contact with the rack. Not the smaller shaft that attaches to the hand wheel. Check my other listings under" South Bend Lathe Parts" for more from this lathe! I am happy to combine shipping to save you money-just let me invoice you before you pay. $3.95 Flat Rate Shipping anywhere in the USA. Contact me for costs to other locations. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers ... moreare not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
South Bend 10L Lathe Apron 5 1/4" Handwheel& Pin Heavy Ten This listing is for a South Bend 10L Lathe Apron 5 1/4" Handwheel& Pin. As shown in the photos. The part is in good condition with much of its paint. It fits on a 1/2" shaft. Check my other listings under" South Bend Lathe Parts" for more from this lathe! I am happy to combine shipping to save you money-just let me invoice you before you pay. $8.95 Flat Rate Shipping anywhere in the lower 48 states. Contact me for costs to other locations. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. ... moreI choose not to burden them down with more of it, but I leave feedback as soon as the buyer does! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1456e9cab36-0x110-
3 jaw chuck threaded 1-1/2"8. Unknown make.Someone ground the ends of the separate outside jaws(shown) but the rest of the outside jaw is fine. Inside jaws are fine. Posted with
Item Details: Title: CUSHMAN 3 JAW CHUCK Metal Lathe 5" Machinist Tool South Bend 1 1/2" 8 Condition: Has dirt. Dust, dings and normal signs of age. Otherwise has no apparent damage or repairs. Size/Dimensions(approximate) 5" diameter Description: Pictures are of the actual item that you will receive. Purchasing Details: Payment: We accept paypal. Most credit cards and cash on pick up. Contact us for other payment arrangements. Shipping: We ship 6 days a week. Your item will ship the next business day after payment is received. We only ship to the address provided in the eBay/Paypal transaction. Combined Shipping: If you are interested in more than one of our items. Please win as many as you like. When you are ready, please contact us and we will send you a combined invoice to save you some shipping charges. Tracking: You can ... moretrack your item by clicking the"View order details" link on the listing that you won. Refunds/Returns: You can return any item for any reason for a purchase price refund. Refunds for items sold with free shipping will be reduced by the original shipping charges. If we made a mistake. We will pay the shipping both ways. Simply mail the item back(include the item# to: The Junk Monkeys. 9931 McClanahan Road. Greencastle. PA 17225 Feedback: We leave feedback immediately after payment has been made. If you are happy with your purchase. Please give us the highest rating in DSR's. If you are not happy, please give us the opportunity to make it right. International Buyers: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below the actual sale amount or mark items as"gift" Special Limited Time Offer: Purchase of this item includes a Free membership. is the ultimate online shopping. Travel and entertainment portal. Af
This is a set of Hardinge 3CB Collets. Sizes are 1/16. 3/32(x2) 1/8, 5/32, 1/4, 19/64(x2) 5/16, 3/8, 7/16, 1/2(x2) Also includes tow Buck collets,that are 7/32 and 15/32, and one marked Germany that is 19/64. Powered by The free listing tool. List your items fast and easy and manage your active items.
This is a South Bend lathe drill pad. Could be shop made, has a larger plate(4" than the standard drill pad, could be made from an original drill pad as I got a drill pad box with it. Powered by The free listing tool. List your items fast and easy and manage your active items.
This is a real nice 8 inch face plate. 1 1/2- 8 threaded mount. I think this was made by Atlas. Excellent condition Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend 9" Metal Lathe 56 Tooth Change Gear 56T The 56 tooth gear is in fine condition with some wear. It has a 9/16" center bore. It is off a South Bend 9 inch metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4. 5 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
South Bend 9" Metal Lathe 40 Tooth Change Gear 40T The 40 tooth gear is in fine condition with some wear. It has a 9/16" center bore. It is off of a South Bend 9 inch metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4. 0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
For auction: South Bend# 4209. Made in USA by SKINNER CHUCK COMPANY( metal) Lathe chuck, 8" 4 Jaw. With 2 1/4 8 TPI backing plate. 4 Independent Jaws and jaws are reversible as shown in picture For sure it fits a South Bend maybe others NO CHUCK KEY WHAT YOU SEE.IS WHAT YOU WILL GET!
This is a straight tool holder. Nice shape good size for South Bend 9 or Atlas Craftsman lathes. 3/4 inch high. 3/8 wide. Powered by The free listing tool. List your items fast and easy and manage your active items.
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 03140700002 Manufacturer: SOUTH BEND Description: SOUTH BEND CLK187RB LATHE Capacity: Model Number: CLK187RB Serial Number: Additional Information: NO CHUCK. STEADY REST, 1 HP, 1 1/2' BORE, CONTAINS 2 PIECES BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our
Nice Original End Gear Guard Bracket Hinge for a South Bend 9" or 10K Metal Lathe. Marked part number 147N2. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
PRECISION MACHINIST TOOLS& PARTS SOUTH BEND 7" SHAPER SH11604-758B USED. OBVIOUS SIGNS OF AESTHETIC WEAR& USE TO OUTSIDE OF MACHINE. BEING SOLD AS IS. MOTOR WAS PLUGGED IN MOVES SLOWLY. NOT SURE WHAT THAT MEANS. ALL MECHANISMS& PARTS LOOK TO BE MOVING. PLEASE INSPECT ALL PICTURES TO DETERMINE WHAT IS INCLUDED IN THIS PURCHASE OR IF ANY PARTS MAY BE MISSING*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. ... moreIF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. PLEASE CONTACT ME DIRECTLY FOR SHIPPING INFORMATION. THIS MACHINE CAN BE PALETTED AND SHRINK WRAPED FOR SHIPPING. DO NOT GO BY LOCAL PICKUP. WEIGHS ABOUT 150 POUNDS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14571e5ff63-0x10e-
You are bidding on the item you see in the pictures. Palmgren 250 milling attachment for atlas craftsman or south bend. Condition is everything moves and turns good missing pin that goes in handle to turn see pictures. Thanks for looking. Posted with
Fits on a 9 inch lathe. In excellent condition. Showing very little if any home shop use.
Original South Bend 8-1/2″ Lathe Face Plate 2-1/4-8 Tpi Mount LFP-100L In very good pre-owned condition. Marked LFP-100L- 5 Slots Actual Diameter 8-`1/4" Thread Mount 2-1/4”8 Threads Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for ... morenon working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
Original 5" 3 Jaw Skinner Chuck and Back Plate For An Atlas. Craftsman or South Bend Metal Lathe. 1 1/2 X 8 TPI. Chuck is marked with" THE SKINNER CHUCK CO. NEW BRITAIN CT. U.S.A" and body measures 5" in diameter and 1 3/8" thick. Back plate is marked with"POLAND" and measures 4 3/4" diameter and 9/16" thick. Jaws move freely through out range. Back plate needs to be mounter to back of chuck and then it will be fully funtional. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LARGE CENTER REST SOUTH BEND LOGAN ATLAS CLAUSING LATHE IT MEASURES ABOUT 7 1/2" BASE TO CENTER WHICH MAKES IT A 15" LATHE. DOESN'T HAVE A CLAMP OR BOLT. ALL MOVING PARTS OPERATE AS THEY SHOULD SMOOTHLY. ANY IDEAS WHAT LATHE IT FITS? IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is ... moreimportant to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
54" SOUTH BEND LATHE BED FOR A SB 9 WITH THE RACK LOOK AT THE SCRAPINGS. THE PICTURES ARE THE BEST DESCRIPTION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH ... moreCONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14575ada8ab-0x10f-
Taper attachment recently removed from a machine. It is missing a couple little items. So please read the ad and ask questions if you are unsure. Thanks a million! The bad: Missing the screw nut. These are usually worn and need replacing anyway. They are readily available on Ebay or elsewhere. The crossfeed screw has light wear. To have a perfect screw. People usally replace these also. Same deal as the nut. A couple of the balls are missing from the crossfeed thrust. Many of the tapers that come thru the shop do not have bearings at all. Just thrust washers. Bottom plate is missing from the bed clamp. Simply a flat plate with two holes. The good: Nice looking heavy 10(10L) taper attachment for your South Bend lathe. All the hard to find items are here and look to be in good shape. Minimal nicks and dings. Although some are present. If you ... moretake care of the above items, you will have a very nice unit at a reasonable cost. I see no breaks or welds, just some typical shop wear that would be expected. Thanks for looking. My price has a best offer feature. Please be fair with your offers and I will do what I can. Thanks; Craig 330.547.6300 Price includes shipping via USPS flat rate. It will ship in two boxes.
This is a pretty nice 2 Morse Taper Live Center. There is some scoring on the point that can be seen in the picture. But none of it is"too" deep. Lots of tooling listed this week. I will combine shipping. Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
Southbend heavy 10" lathe back gear lever and shaft as shown. back gear lever/shaft from a South Bend heavy 10" lathe.
Original South Bend 11″ Lathe Face Plate 2-1/4-8 Tpi Mount LFP-101T In very good pre-owned condition. Marked LFP-101T- 5 Slots Actual Diameter 10-3/4" Thread Mount 2-1/4”8 Threads Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non ... moreworking items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1457743ab2a-0x10d-
How to run a lathe by South Bend Lathe 2 books by South Bend Lathe 1941 and 1944. 6'x 9' x 2'
This belongs to an acquaintance who no longer uses it. It needs a mounting stud and nuts. He told me that he hardly used it. And it looks like he's right. It has some grime, stains, paint loss and other visible signs of use. I switched it on, and it runs really fast, smoothly and quietly. I will be happy to add pictures and answer questions. Thank you for looking.
south bend face plates 4 of them are 5 5/8 and the other 2 are 6 1/2inch.good condition.
SOUTH BEND 9" 10K METAL LATHE CARRIAGE SADDLE LOCK& SCREW The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Posted with
Themac J40 Toolpost Grinder Model no. 2429. I have installed new permanent lubricated Bearings. Brushes very recently installed and are in good shape. I put a new plug on the cord. Switch and cord in great shape. Up and running great. All the pullies and guard are there plus a couple of grinding stones. But in truth I haven't used the stones, just ones I found in the shop. The belt I have for it are sweeper belts. I have used them before I rebuilt it, but I think it should really have the Themac belts for it to be at its best. I built a nice box for it some time ago and kept it in nice shape. I don't have the manual for it, however the specs and instructions for it are listed in the Themac Catalog available on their web site. This buy is a real value since it lists for $2,165 for this grinder and stuff on their web site. Please use ... morePaypal only, unless arrangements are made.
18 inch stedy rest in great condition.
Very Nice South Bend Heavy 10/ 10L 3-1/2' 12 Speed Lathe with Quick Change Gearbox. Serial# 2482RKL9. Built c. 1949/1950. Catalog 187ZS. 1-3/8" Large Spindle Bore. Has been repainted and could use a little touch up here and there. Runs smoothly and quietly. See video at http:www.youtube.com/watch?v=dpMn-VtyL-s&feature=youtu.be Ways are in excellent condition with remarkably few dings for a 65 year old machine. Has Taper Attachment that is complete and works perfectly. Everything works. Previous owner replaced spindle oilers and wipers. Comes with tooling and spare belts as shown. 100% complete and ready to make chips. 3/4 HP Motor is currently wired for 220v Single Phase operation but could be converted to 110v in about 15 min. Can be seen under power in Orange County NY. Local pickup only. Cash or USPS money order. See pictures ... morebelow for condition. No Reserve. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
CUSHMAN INDUSTRIES INC 6" 4 JAW DUTY INDEPENDENT CHUCK REVERSIBLE JAWS 1-1/2" 8 TPI PART NO. 4006B The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
MT2 Little Use There are lots of nice milling related items and blocks in this auction* as always.consider combined shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing ... morebusiness with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can
Up for sale is a south bend 11" lathe bed 3 1/2' It is in nice condition with normal wear. Posted with
13 X 6 FT BED SOUTH BEND LATHE FORMER GUNMAKERS MACHINE POWER TURRET WITH DRILL CHUCKS AND CENTERS 3 JAW CUSHMAN 6 JAW SET TRU BUCK CHUCK FACE PLATE 4 JAW CHUCK EXTRA TOOLING THIS IS AN ORIGINAL CONDITION MACHINE NO REPAINT OR ANYTHING TO TRY AND COVER UP HAVE MANUALS TO GO WITH AS WELL QC GEAR BOX WITH FULLY INTACT BACK GEAR THE GENTELMAN THIS BELONGED TO WAS A BARREL AND CHAMBER SMITH HE HAS THIS MACHINE PRIMARLY SET UP FOR GUNSMITH PLEASE FEEL FREE TO TO CONTACT WITH ANY QUESTIONS OR CONCERNS THANKS DAVE ROCHESTER TOOL 248 875 2089 PLEASE FEEL FREE TO SEE MY OTHER ITEMS AS I WILL SHIP WORLD WIDE COMBINED SHIPPING AND PICK UP IS ALWAYS WELCOME THANK YOU
Excellent 5" Buck 3 Jaw Scroll Chuck#436 for Lathe 1 1/2" x 8 threads. Includes 2 sets of jaws, no key, very smooth running. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
South bend No 91A 1930 full line machine. tool catalog. 105 pages. One of the largest. Catalogs SB ever put out! Very cool. Great shape. All items are used. As is. NO" returns. Any additional information. Pics. tracking, Please e-mail me. Ships USPS. USA Only! I have many items listed. Thanks for looking.
South bend 10" lathe assorted repair parts. 48& 30 tooth spur gears. Shift arm, quadrant gear studs and a threading stop. May not fit. A 10" Has a 2 3/4" wide dovetail at top. All items are used. As is. NO" returns. Any additional information. Pics. tracking, Please e-mail me. Ships USPS. USA Only! I have many items listed. Thanks for looking.
South bend 10" lathe apron worm drive. Gear. Bearings and drive key. Very little use. Near mint shape. A must have to. Take up all your back lash& gear slop! All items are used. As is. NO" returns. Any additional information. Pics. tracking, Please e-mail me. Ships USPS. USA Only! I have many items listed. Thanks for looking. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-145823f11bd-0x10c-
South bend heavy 10L lathe spindle. Roller& bronze thrust bearing and nut. Good shape. Also a gear box 24 tooth spur gear w/ 5/8" hole. All items are used. As is. NO" returns. Any additional information. Pics. tracking, Please e-mail me. Ships USPS. USA Only! I have many items listed. Thanks for looking.
South bend lathe single arm tumbler quick change. Threading gear box assy. Fit's 10L SB lathes. Gearing is in near mint shape. Awesome find! Paint a little flaking. Small change lever has been repaired. nice job) Comes with two. Different era gear charts& a mint selector arm idler. All gears are near mint or haven't. Even been ran! Nothing loose. Tight selector. Arm. Ultimate upgrade for your non gear box lathe. Use your magn-cursor and check out the gear pics! All items are used. As is. NO" returns. Any additional information. Pics. tracking, Please e-mail me. Ships USPS. USA Only! I have many items listed. Thanks for looking.
South Bend 10K collet setup with 6K collets. Drawbar marked HWC-100K. Drawbar turns nicely in bearing. Thread protector for spindle. Ten 6K collets: 1/16" Buck 1/8" R-S-B 3/16" Buck 1/4" Buck 5/16" Buck 3/8" R-S-B 7/16" Modern 1/2" Buck 9/16" Buck 5/8" R-S-B No returns. Shipping/handling $20 to USA only in large flat rate box. No international shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1458395f6ca-0x10e-
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Offered is a nice used Rohm 6 1/4" 3 Jaw Chuck for a 10-16" South bend Lathe. It Has a 2 1/4" 8 Thread Back Mount. The jaws are reversible. With hard master jaws. You can also mount soft jaws on this chuck.
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES This mounts on the left gear guard on the head stock versus the old style switch arm where you have to reach over a spinning chuck to turn machine on/off. Very good shape. Comes with screws to mount to your lathe and the screws to attach your drum or pushbutton switch. The last two photos show same type of mount on a later South Bend 13 from the early 1980's, lathe is not included in sale just mount D4226.1 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem ... morethe item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
Very Good Single bearing Live Center for Lathe MT2 Shank. Very good point, smooth bearing. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Very Good J H Williams#T-0-S Carbide Turning Tool Holder for Lathe 15/16" x 3/8" x 4 1/4" Shank. 1/4" tool capacity, 0 degree tool angle for carbide bits, some grinding scars on nose. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Very good Armstrong#20 Cut Off Tool Holder for Lathe 15/16" x 3/8" x 3 1/4" Shank. Some indents on top of shank, includes 9/16" cut off tool. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Excellent J H Williams#Th00L Tool Holder for Lathe 3/4" x 5/16" x 3 1/2" Shank. 3/16" tool capacity, 15 degree tool angle. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Excellent Cross Feed Stop for Lathe 1" Wide x 3 1/8" long x 3/4" thick. Dove tail is 1 7/8" wide at the top and 1 9/16" wide at the bottom, from 10" Logan, will fit many others. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Excellent Carriage Stop for Lathe From 10" Logan. Top block is 2 1/4" x 1 1/2" x 1" thick with 11/16" wide"V" bottom block is 1 3/4" x 1 1/2" x 1" thick, includes stop rod with set screw. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Excellent Logan Rocker Type tool Post for Lathe Lantern is 3 3/16" tall. 1" OD with 7/16" x 2" slot. Concave washer is 2 1/4" OD with 1" hole, base block is 1 3/8" x 1 3/8" x 1/4" very good wedge, some edge dings in washer(see picture) includes wrench. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
Excellent Heavy Duty Boring Bar Holder for Lathe Three ports for bars(5/8" 1/2" and 3/8" 15/16" from bottom of holder to center of ports, base block is 1 3/8" bottom, 1" top and 2 3/4" long. No international. Ask any questions before bidding. Always happy to combine shipping when possible.
HEAVY DUTY 2in.DIAMETER DIE HOLDER 18 INCHES LONG LIKE NEW INCLUDES A 1/4-28 DIE VERY NICE TOOL
GENUINE SOUTH BEND 5C COLLET CLOSER MOVES FREELY CAME OFF A 13 IN LATHE NOT SURE IF IT WILL FIT OTHER SIZES WILL SHIP WORLD WIDE SHIPPING THRU FED EX GROUND COMBINED SHIPPING WELCOME PLEASE SEE MY OTHER ITEMS THANKS DAVE ROCHESTER TOOL
The Following Item is for sale 1- South Bend Lathe Tool Post Wrench# 253 Machinist Tool. Item is in very good working order and good condition unless otherwise noted. Please email any questions before bidding. Will call is available. Thanks for your interest in this item and Good Luck Bidding! Powered by SixBit's eCommerce Solution.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14589dcc308-0x118-
Lot of 2 change gears: one is 48 tooth. 3/16" keyway and 1" bore outside diameter is about 4-1/8" thickness is 3/4" second is 54 tooth, 1/4" keyway and 1" bore outside diameter is about 4-5/8" thickness is 3/4" used. Working condition, see pics. Normal 0 MicrosoftInternetExplorer4 General terms and conditions below. See detailed auction listing above for specifics which take priority over the general terms: Please check out my other listings for more stuff. You never know what it will be. Varies quite a bit. IMPORTANT: I am wiling to combine shipping on multiple auctions ending in the same week if it can reasonably be done on my end of it. BUT to get this you must follow these steps: 1. Wait to pay until all the auctions you are bidding on are over. 2. Please request an invoice. Either through the listing ... moreor through eBay’s email system. 3. Pay the combined total of the invoice ONE TIME only. If you don’t request an invoice it becomes next to impossible to offer you. The valued customer, a combined shipping discount. I want to be able to save you as much $$$ as possible on shipping in this rough time we are living in BECAUSE I WANT AND VALUE YOUR BUSINESS. Additional note on shipping: Apparently it is the NEW GOUGE/RIPOFF. UPS is still charging a fuel surcharge. There is nothing I can do about that except try to work with you on alternative shipping: I will quote you a parcel post rate from the post office IF(and this is a big IF) it fits parcel post limitations of size and weight. And IF you are willing to wait the extra time in shipment for the lower cost. Please email me your shipping address for an accurate quote BEFORE the auction ends and before you bid on anything. Also. Sometimes the parcel post thing will work for combined shipping and sometimes it won’t. Depends. Additional additional note on shipping: ebay now charges 9% on the shipping costs also. I do not like this and you do not like it either. I have no choice but to mark up the shipping costs by an additional
Made in the U.S.A. by The Skinner Chuck Co For South Bend Lathe Works. This is a 6" Four-Jaw Lathe Chuck w/ Threaded Mount in GREAT condition. Model# 4206-51 SPECIFICATIONS: Chuck Diameter: 6" Number of Jaws: 4 Thru Hole: 1-3/8" Chuck Thickness: 2-1/2" Threaded Mount: 2-1/4" 8 TPI Comes exactly as shown in pictures.
Up for auction is a south bend lathe 9 inch collet closer hand lever in good condition. Comes with everything in photo. Takes 3c collets. Part number HLC 105 N. Item ships after cleared funds. 10 pounds from zip code 06770. Ups ground Posted with a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1458f2abdbe-0x10f-
Item#3486 17” x 80” South Bend Turn-Nado Engine Lathe Model Equipped With: HARDENED& GROUND BEDWAYS 3 POINT STEADY REST 10" 3 JAW CHUCK CHIP PAN 12" 4 JAW CHUCK TOOLPOST THREAD DIAL INDICATOR Machine Specifications: SWING OVER BED AND SADDLE WINGS- 17-1/8" SWING OVER CROSS SLIDE- 10-1/2" SWING OVER CROSS SLIDE WITHOUT CHIP GUARD 11-1/4" DISTANCE BETWEEN CENTERS- 80" SPINDLE NOSE- D1-8" CAMLOCK HEADSTOCK SPINDLE TAPER- NO. 5 MORSE SPINDLE BORE- 2-9/16" SPINDLE SPEEDS- 18) 30 TO 1580 RPM MAIN DRIVE MOTOR- 7.5/ 3.75 HP 3/60 THREADING CAPACITY: WITH 20 TOOTH GEAR- 60) 2-3/4 TO 160 TPI WITH 40 TOOTH GEAR- 10 EXTRA THREADS) 1-3/8 TO 2-1/2 TPI LONGITUDINAL FEEDS- 60) 0.0021 TO.1242 IPR POWER CROSS FEEDS- 60) 0.0011 TO 0.0678 TAILSTOCK SPINDLE- NO. 4 MORSE APPROXIMATE MACHINE WEIGHT- 5.000 LBS APPROXIMATE ... moreMACHINE DIMENSIONS- 136"LR) X 37"FB) X 53"H) Shipping Point: IL Price: $8.750.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-1459047cb13-0x105-
DAPRA BIAX SCRAPER 7ELM W/CASE-$1 AUCTION! SOUTH BEND. LOGAN, ATLAS LATHE $1 AUCTION! NO RESERVE– Biax Power Scraper Model 7ELM. With Original Case! Details: 110v Power Scraper(1) One Blade Attachment 130M. No bit, just bit holder We will ship World Wide…please ask for quote Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_526(GS 6.6.6(526)
DOALL BAND SAW BANDSAW BLADE GUIDES-ASSORTED GRAB BAG LOT! SOUTH BEND LATHE. $1 DOLLAR GETS THEM ALL! Box of DoAll Band Saw Blade Guides and other miscellaneous stuff. Details: I Found a box at the bottom of a box and have been staring at these for months trying to figure out what they were. This is what is in the box and EXACTLY what you are bidding on: Pairs of Band Saw Guides: All DoAll Branded 33 pairs total 1/16” 1/8” 3/32-1/16” combo 1/16” 1/8” 3/32-1/16” 1/8-3/16” 1/8-3/16” 3/16” 3/32” 3/32-1/16” 1/8-3/16” 1/4” 1/4” 1/4” 1/4” 3/16” 1/8-3/16” 1/4” 3/8-1/2” 3/8-1/2” 3/8” 3/8” 1/4-5/16” 1/4” 1/4” 1” With Carbide Tips! 1”plain 1”plain 3/4” Carbide Tipped 3/4”plain 3/4”plain 5/8-3/4” Singles(not paired) DoAll Branded 8 singles total 3/4” Carbide Tipped 1/4-5/16” 3/8" 5/8" 1/4” 3/8” different thickness 3/32” 1/8-3/16” Also in the ... morebox are: 3 unknown blocks 4 Vee shape objects(gray colored) 4 screws 3 flat sheet metal objects stamped(1) 025” SAW(1) 032” SAW(1) 035” SAW If you are the high bidder you will get the whole box of blade guides! These are not cheap when you buy them separately. Buy them all and enjoy, give the extras to your friends, resell them, I don’t care just as long as I don’t have to look at them any more! We will ship World Wide… Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_568(GS 6.7.3(568)
HSS END MILL LOT-USA-NO JUNK-135pcs.BRIDGEPORT MILLING MACHINE, SOUTH BEND LATHE– Fdfd. Df. $1 DOLLAR AUCTION– 135 USA END MILLS. Some New, Some Used, Some Re Sharpened, Some May Need Sharpening— NO JUNK IN THIS LOT! Details: 135 End Mills Total No Junk Some May need touch up but most have some life left and many are New There are 2 end mills that are double end mills with 1 side broken Other than the 2 broken ends NO OTHER END MILLS ARE BROKEN Good Stuff Here. Good Old USA consumables! Sizes range from 1/8” up to 1" We will ship World Wide… Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_568(GS 6.7.3(568)
This is a vintage book on running a lathe that my father used in 1940. It's in good condition. Although the cover has storage scuffs. My dad's name is written on the title page. The book is well illustrated.
BRIDGEPORT MILLING MACHINE BORING HEAD#2. ORIGINAL CASE! SOUTH BEND LATHE Nice Bridgeport Boring Head#2 with Original Case and Extras… Details: Everything in the pics is what is included in this auction. Straight Shank. 750” Diameter We will ship World Wide… Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_568(GS 6.7.3(568)
Lathe Lantern Tool Post w/ boring Bars Atlas South Bend Logan Craftsman 9" 12" Swing Metal Lathe in excellent working condition. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
ALORIS AXA#20 INDEX CARBIDE TOOL HOLDER SOUTH BEND LATHE. LOGAN, MONARCH 10EE Aloris#20 AXA-20 Indexable Carbide Insert Tool Holder for AXA sized Quick Change Tool Posts Details: Qty(1) AXA#20 Holder Qty(2) Round Insert Holders. one is shown ON the holder) Qty(1) used Carbide Insert From the Aloris Wed Site: A unique design provides for many angular turning. Contouring and chamfering operations. The cartridge has 12 indexing positions at 15° intervals. All holders assure proper cutting edge and clearance angles at all indexing points. Two-way adjustable rake for right or left hand turning with 5° cutting angle– positive stop. Tool steel cartridge adjusts every 15º for right or left hand turning, facing or chamfering. 12 positive lock positions. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. ... moreStandard triangular carbide insert has 6 cutting edges. We will ship World Wide… Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_568(GS 6.7.3(568)
Nice Lot of 3 2-Spiral End Mills And 1-Keyway Cutter for an Atlas. Craftsman or South Bend Metal Lathe. Spiral End Mills Marked"Weldon 1/4 682-HS CAT BB8-2" Union HSG 1/4" and the Keyway Cutter Marked"No 505 HS" 5/8" blade diameter and 1/2" diameter arbor. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original South Bend 5C Collets. Fits South Bend Heavy 10" Lathe. Stamped with"MODERN 5C 17/32" and the other is" FROST BROS. CHICAGO 5C 19/32" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-145959c021e-0x110-
COMPLETE SOUTH BEND HEAVY 10 INCH LATHE QUICK CHANGE GEARBOX ASSEMBLY FINE USED Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge FINE USED SOUTH BEND HEAVY 10 INCH QUICK CHANGE GEARBOX. CLEANED COMPLETELY AND INSPECTED. FINE GEARS AND MOST SHOW NO USE AT ALL. LABEL HAS WEAR. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
VERY NICE 4 JAW 6" CHUCK FROM A SOUTH BEND LATHE WORKS LATHE 1 1/2" ARBOR. REVERSIBLE JAWS. KEY IS INCLUDED,NO CHIPS OR MARKS I NO LONGER HAVE THE LATHE, I HAVE A LOT OF OTHER ITEMS. SHIPPING US FLAT RATE BOX, ALL OTHERS CONTACT ME FOR SHIPPING.
SOUTH BEND COMBINATION KNURLING CUT-OFF BORING TOOL HOLDER BLOCK MODEL TVB-100NK. In great shape. You will get what you see. I will to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail or call 954-554-3144. Thank you! CHECK OUT MY OTHER LISTINGS* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14596036ea5-0x104-
Armstrong R.H. lathe tool holder 1/2 x 1 1/2" shank. Has two unused cutting bits and unused wrenches. Is stil unused in box. Box is in rough shape. So didn't take photo of it. I think the straight cutting bit holder is shop made, but looks to be in excellent quality.
Good condition carbide tool holders. Carboloy Systems. These have 1" x 1" square and 3/4" x 1" shanks.
Armstrong No. 2080 Tool Holder w/ Cutting Tool for 10" Lathe South Bend Fits 10" lathe Shank measures 3/8" x 3/4" x 2 3/4"
Armstrong No. 571 Cut-Off Tool Holder w/ Blade Very nice used cut-off holder with blade. For 3/4" blades Shank measures 4" x 1 3/16" x 1/2"
ALORIS BXA QUICK CHANGE TOOL POST WITH HOLDERS. SOUTH BEND LATHE, ALORIS, LOGAN! 1 DOLLAR AUCTION! Very Nice Aloris BXA Quick Change Tool Post with 4 Genuine Aloris Holders! Details: For 13” Swing Lathes or Higher American Made Includes: 1 Type“1” Holder 3 Type“2” Holders We will ship World Wide… Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_568(GS 6.7.3(568)
Original South Bend Heavy 10 5 1/2" Lathe Dog Face Plate 2 1/4 X 8 in excellent working condition you get everything you see in the pictures. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
Original South Bend Heavy 10 Lathe Large Dial Compound and Lantern Tool Post in excellent working condition but as seen in the pictures there are a few nicks on the back edge of the compound and there is no rocker with the tool post holder you get everything you see in the pictures. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
Original South Bend Heavy 10 Telescopic Lathe Steady Rest 10L in excellent working condition you get everything you see in the pictures. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
ALORIS BB2 BORING BAR ONE END TURNED DOWN TO.624 DIA. X.81” WITH FLAT. SET SCREW MARK OPPOSITE FLAT. MAIN BODY DIA. 750” APPROX 8.00” OVER ALL LENGTH AND TAKES A.250 TOOL BIT. RIGID(SEE IMAGES) Please email me with any questions. Check out my other items for more good deals on quality tools! ALL SALES FINAL No Returns accepted. It is the sole responsibility of the buyer. Before bidding. To determine the items worth or suitability. PAYMENT PAYPAL ONLY SHIPPING $6.00 USPS US ONLY Will combine shipping where possible.
SOUTH BEND LATHE DOG DRIVER PLATE CAN ALSO BE USED WITH ATLAS& POSSIBLY LOGAN LATHES THAT HAVE 1 ½”8 SPINDLE THREADS USED BUT IN GOOD CONDITION(SEE IMAGES) Please email me with any questions. Check out my other items for more good deals on quality tools! ALL SALES FINAL No Returns accepted. It is the sole responsibility of the buyer. Before bidding. To determine the items worth or suitability. PAYMENT PAYPAL ONLY SHIPPING $9.99 USPS
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. I do not know what kind of lathe they do come off of. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. ... morePLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
SOUTH BEND FACE PLATE& CHUCK BACKPLATES. Fits Lathes with 1 1/2"8 thread. Face Plate and back plates are in good used condition. Check out my!
5C COLLET SLEEVE ADAPTORS. Comes with all Parts shown on pictures. Check out my! On Apr-21-14 at 10:37:56 PDT. Seller added the following information: On the 5C CWC SB the guide retaining pin is missing.
HELLO- YOU ARE PURCHASING THE PICTURED JACOBS DRILL CHUCK. IT IS USED. OPENS AND CLOSES EASILY. LABELING ON THE DRILL CHUCK READS: JACOBS CHUCK NO.32 CAP. 0- 3/3 PLEASE SEND ANY QUESTIONS YOU HAVE. IF YOU NEED ANY MACHINE SHOP TOOLING PLEASE VISIT MY STORE! END MILLS. TAPS, VISES AND HUNDREDS OF MACHINE SHOP ITEMS. FREE SHIPPING POSSIBLE SEE NEXT LINE! I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! UL. MD55513. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1459df77506-0x10b-
NICE TAPER FROM A JET 24120 LATHE. APPR. 14" TRAVEL. TOOK OFF TO MOUNT A MUCH LARGER ONE ON MY MACHINE.
VERY NICE SOUTH BEND 5" FACE PLATE 1 1/2" arbor FROM MY 9" SOUTH BEND LATHE. I'M GETTING OLD SO I'M GETTING RID OF A LOT OF MY STUFF BEFORE MY SON TAKES THEN TO THE JUNK YARD HE KNOWS NOTHING OF WHAT THEY ARE. USPS FLAT RATE BOX, ALL OTHERS CONTACT ME FOR COST. PLEASE CONTACT ME WITH ANY QUESTIONS THANKS.
Original South Bend Lathe Collet Rack Parts with 7 5C Collets missing upright bar and bed mount but the rest is in excellent working condition but dose have chipped paint you get everything you see in the pictures. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
THIS CHUCK WAS FROM MY 9" SOUTH BEND LATHE.IT IS A 5" 4 JAW CHUCK WITH REVERSIBLE JAWS. IT IS MADE BY WESCOTT CHUCK CO. THE ARBOR IS 1 1/2" X 8 TPI. WITH CHUCK KEY.i JUST TRIED IT ON A SOUTH BENT LATHE IT WORKS GOOD. I'M GETTING OLD SO I'M GETTING RID OF MANY OF MY ITEMS BEFORE MY SON TAKES THEN TO THE JUNK YARD. USPS FLAT RATE BOX, ALL OTHERS CONTACT ME FOR PRICE. ASK ANY QUESTIONS. THANKS
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS SOUTH BEND LATHE 18" FACE PLATE ZOOM IN FOR ALL INFORMATION. PICTURES SHOW RULER TO DETERMINE SIZE& THICKNESS. PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE ... moreTHE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
Williams Boring Bar Holder With 3 Armstrong Tool Holders South Bend Lathe 16" This lot includes the following tool holders: Williams TH-11 Boring bar holder(shank measures 5 1/4" x 3/4" x 1 5/8" Armstrong No. 4R Right tool holder(shank measures 6 3/4" x 7/8" x 1 3/4" Armstrong No. 4S Straight tool holder(shank measures 6 1/4" x 7/8" x 1 3/4" Armstrong No. 4L Left tool holder(shank measures 6 3/4" x 7/8" x 1 3/4" Fits 16" South Bend lathe All are in very good condition
South Bend 48" Heavy 10 Lathe Bed with Adjustable Leveling legs in good usable condition but there are a few nicks near the headstock end as seen in the pictures. I also have the original south bend lathe cabinet that the lathe was on if interested. THIS IS FOR LOCAL PICKUP ONLY
With prices like this. It's not worth making it yourself. A holder for both a 1" and 1 1/2" threading die. Small one has a 1/2" shank, large 3/4" shank. Lots of tooling listed this week. I combine on shipping! Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by