In 
 
Order by: 
Available to: 
Price: 
 - 
$
96.95
Buy It Now
$0 Shipping
Condition: New
Location: Durham,NC,USA
$
179.99
Buy It Now
Free Shipping
Condition: Used
Location: Nashville,TN,USA
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ shaft moves in/out good distance from base to shaft center 6 1/2" free shipping in USA for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
$
47.95
Buy It Now
$9.75 Shipping
Condition: Used
Location: Danville,NH,USA
This listing is for a Armstrong threading tool 2050. It is in excellent condition. It measures 3/4" X 3/8" and the blade is in great condition. ... moreI accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
$
175
Buy It Now
Free Shipping
Condition: Used
Location: Bloomingburg,NY,USA
Thread dial from a south bend 13" lathe.turns but will need to be oiled to turn nice.loose paint but decent condition.Spend a few minutes and have ... morea decent thread dial for your 13" Posted with
$
649.89
Buy It Now
Free Shipping
Condition: Used
Location: Nashville,TN,USA
$
325
Buy It Now
$0 Shipping
Condition: Used
Location: Spring Hill,KS,USA
$
45
Buy It Now
Free Shipping
Condition: New
Location: Berrien Springs,MI,USA
$
54.95
Buy It Now
$5.85 Shipping
Condition: New
Location: Bothell,WA,USA
$
39.5
Buy It Now
$4.25 Shipping
Condition: New
Location: Delphi,IN,USA
$
395
Buy It Now
$0 Shipping
Condition: Used
Location: Sicklerville,NJ,USA
$
295
Buy It Now
Free Shipping
Condition: Used
Location: Granger,IN,USA
$
95
Buy It Now
Free Shipping
Condition: New
Location: Berrien Springs,MI,USA
$
150
Buy It Now
$0 Shipping
Condition: Used
Location: Bloomingburg,NY,USA
Excellent 76T Bull Gear#AS15NK1 for 9" South Bend Lathe with Horizonal Drive or Underdrive 1 5/8" Keyed bore. Excellent pin and spring, very, ... morevery minor gear wear. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
$
151.88
Buy It Now
$5.95 Shipping
Condition: Used
Location: Minneota,MN,USA
$
30
Buy It Now
Free Shipping
Condition: New
Location: Rice,MN,USA
$
19.98
Buy It Now
$0 Shipping
Condition: New
Location: Ionia,IA,USA
$
60
Buy It Now
$10 Shipping
Condition: Used
Location: Mahwah,NJ,USA
Excellent Condition- Original South Bend cross slide thread cutting stop. For use with a South Bend 9" or 10K lathe. Retains original South Bend ... moredecal, pin and set screw. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
149.99
Buy It Now
$19.99 Shipping
Condition: Used
Location: Lombard,IL,USA
$
19.99
Buy It Now
Free Shipping
Condition: Used
Location: Waukegan,IL,USA
$
20
Buy It Now
$5.75 Shipping
Condition: New
Location: Ionia,IA,USA
$
69.95
Buy It Now
$0 Shipping
Condition: New
Location: Durham,NC,USA
Rebuild Manual& Kit for 9” South Bend Lathe Made in USA By ILION Industrial Services. LLC Horizontal Drive Model A If you are contemplating cleaning ... moreup that old South Bend sitting in the garage. This is what you will need to get the job done. For owners of the vintage Horizontal Drive 9" South Bends who need to disassemble and clean up their machine, this comprehensive instruction manual plus our aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original operating condition. The 106 page professionally produced and published instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe. Click on the page samples above and hit the"zoom" button to see a close-up. The instruction are very straight forward and no prior machinery rennovation experience is required. The manual also includes a list of resources for vintage SBL owners as well as parts references, tool specifications, lubrication guides and material specifications. The text is printed in a font that is two points larger than is typical so if you getting up in years like me, you will not have to work at the bench with your reading glasses on. The consumable parts we include with the kit were all designed to be completely compatible with the 9" series of lathes. The wicks provide adequate lubrication to critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the spindle are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will
$
75
Buy It Now
$10 Shipping
Condition: Used
Location: Mahwah,NJ,USA
$
40.95
Buy It Now
Free Shipping
Condition: New
Location: South El Monte,CA,USA
$
48.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
39.95
Buy It Now
$4.5 Shipping
Condition: New
Location: Cross Plains,TN,USA
$
275
Buy It Now
$0 Shipping
Condition: Used
Location: Canastota,NY,USA
$
17.75
Buy It Now
$0 Shipping
Condition: New
Location: Franklin,OH,USA
$
23
Buy It Now
$0 Shipping
Condition: Used
Location: Jupiter,FL,USA
$
29.95
Buy It Now
Free Shipping
Condition: Used
Location: Youngstown,OH,USA
SOUTH BEND 9 LATHE CHANGE GEAR BANJO BRACKET GUARD. 9W-146B, NICE CONDITION. Please let the pictures help with the description and condition and view ... moremy other auctions for more LATHE TOOLING + PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
$
150
Buy It Now
Free Shipping
Condition: Used
Location: Granger,IN,USA
$
400
Buy It Now
$0 Shipping
Condition: Used
Location: Wichita,KS,USA
$
155
Buy It Now
$0 Shipping
Condition: Used
Location: Bloomingburg,NY,USA
Very Nice South Bend Heavy 10/ 10L 3-1/2' 12 Speed Lathe with Quick Change Gearbox. Serial# 2482RKL9. Built c. 1949/1950. Catalog 187ZS. 1-3/8" ... moreLarge Spindle Bore. Has been repainted and could use a little touch up here and there. Runs smoothly and quietly. See video at http:www.youtube.com/watch?v=dpMn-VtyL-s&feature=youtu.be Ways are in excellent condition with remarkably few dings for a 65 year old machine. Has Taper Attachment that is complete and works perfectly. Everything works. Previous owner replaced spindle oilers and wipers. Comes with tooling and spare belts as shown. 100% complete and ready to make chips. 3/4 HP Motor is currently wired for 220v Single Phase operation but could be converted to 110v in about 15 min. Can be seen under power in Orange County NY. Local pickup only. Cash or USPS money order. See pictures below for condition. No Reserve. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
119.99
Buy It Now
$14.55 Shipping
Condition: Used
Location: Berlin,CT,USA
2.320" Diameter 1.749" Bore 1/8" Key.562" Face 18 DP Please visit our website. Lostcreekmachine.com To see more tooling from Lost ... moreCreek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
$
99.99
Buy It Now
$0 Shipping
Condition: Used
Location: Anderson,CA,USA
$
49
Buy It Now
Free Shipping
Condition: Used
Location: Bordentown,NJ,USA
Nice- Original gib and set of five compound rest base gib adjusting screws for a 9" or 10K South Bend lathe. Gib is 6 7/16" long. 3/8" ... morewide and 1/8" thick. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
47.95
Buy It Now
$16.75 Shipping
Condition: Used
Location: Danville,NH,USA
Nice- Original South Bend reverse bracket assembly with bolt for a 9" South Bend lathe. All in good order. As shown. Always combine shipping- If ... moreyou are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
89.99
Buy It Now
$8 Shipping
Condition: New
Location: Niles,MI,USA
$
4,500
Buy It Now
$0 Shipping
Condition: Used
Location: USA
$
139.99
Buy It Now
$24.99 Shipping
Condition: Used
Location: Linden,NJ,USA
$
375
Buy It Now
Free Shipping
Condition: Used
Location: Oregon,OH,USA
$
39.95
Buy It Now
$4.5 Shipping
Condition: New
Location: Cross Plains,TN,USA
$
39.95
Buy It Now
$4.5 Shipping
Condition: New
Location: Cross Plains,TN,USA
$
39.95
Buy It Now
$5.95 Shipping
Condition: Used
Location: Minneota,MN,USA
$
150
Buy It Now
$0 Shipping
Condition: Used
Location: Bloomingburg,NY,USA
New Precision Take-up Bearing for South Bend 9" Model A.B,C and All 10k Lathes From ILION Industrial Services. LLC Please note that these precision ... moreground bearings are all brand new. Made in the USA. They are sold as a set of two thrust washers and one bearing as shown above and come with complete instructions for installation on your 9" workshop model A, B, C or the model 10k lathe. The photos above show the headstock and the original take-up nut and washer for demonstration purposes only but they are not included in the kit. If you are rebuilding your lathe, please take a moment to look through our other listings for illustrated lathe rebuild manuals and parts kits If the old hard fiber take-up washer on your SouthBend Lathe 9" or 10k is damaged. Missing, or just plain worn out, this is what you will need to replace it. The purpose of the original take-up washer was to remove excessive lateral play in the spindle(this is the slight left to right movement in the spindle when viewed from the front of the lathe) The take-up washer was typically made of hard red fiber and contained a brass stud to allow the take up nut and washer to rotate together when the spindle was in motion. The design was such that some clearance between the washer and headstock was necessary or the washer would wear out prematurely. Often on older lathes. This washer has become damaged through improper adjustment, or has simply degraded over time and is no longer suitable for its intended purpose. When doing face plate turnings this excessive lateral play can often cause chatter or can cause drift when turning up to a shoulder. The bearing set contained in this kit is designed to replace the hard fiber washer such that the majority of the lateral play can be removed from the spindle. Essentially this bearing allows the slight preloading of the ball thrust bearing on the opposite side of the headstock casting. This preloading prevents the spindle from drifting laterally when under load. The bearing dimension is 1-3/8" insi
$
47.7
Buy It Now
$4.25 Shipping
Condition: New
Location: Delphi,IN,USA
$
28.99
Buy It Now
$5.35 Shipping
Condition: Used
Location: New Britain,CT,USA
$
18.99
Buy It Now
$4 Shipping
Condition: Used
Location: New Britain,CT,USA
$
79.95
Buy It Now
$0 Shipping
Condition: New
Location: Durham,NC,USA
$
79.95
Buy It Now
$16.75 Shipping
Condition: Used
Location: Danville,NH,USA
$
48
Buy It Now
$7.81 Shipping
Condition: Used
Location: Long Beach,CA,USA
$
97
Buy It Now
Free Shipping
Condition: Used
Location: Chadds Ford,PA,USA
A SOUTH BEND LATHE THREAD DIAL INDICATOR FOR THE HEAVY 10 OR AS SOME USE THE MODEL NUMBER 10L. NICE USED CONDITION. HAS A SMALL AREA WHERE SOMEONE GROUND ... moreOFF SOME OF THE CASTING NEAR THE GEAR. CAN'T IMAGINE WHY ANYONE WOULD DO THIS BUT DOES NOT LOOK TO BE ANY PROBLEM.
$
40
Buy It Now
$5 Shipping
Condition: New
Location: Yorba Linda,CA,USA
$
22
Buy It Now
$5.75 Shipping
Condition: Used
Location: United Kingdom
$
89.99
Buy It Now
$7.86 Shipping
Condition: Used
Location: Nashville,TN,USA
$
45
Buy It Now
$0 Shipping
Condition: Used
Location: Staten Island,NY,USA
$
21
Buy It Now
Free Shipping
Condition: New
Location: Merrimack,NH,USA
$
74.95
Buy It Now
$0 Shipping
Condition: New
Location: Durham,NC,USA
$
125
Buy It Now
$0 Shipping
Condition: Used
Location: Millstadt,IL,USA
$
19.95
Buy It Now
Free Shipping
Condition: Used
Location: Youngstown,OH,USA
SOUTH BEND 9 10K LATHE CHANGE GEAR BANJO BRACKET. NICE CONDITION. Please let the pictures help with the description and condition and view my other auctions ... morefor more LATHE TOOLING + PARTS. Check my feedback. Satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
$
165
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Spring Hill,KS,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Past Items  
 
This listing is for a Jacobs 14N Super Chuck. It is 0-1/2" and has a#2MT. It is in very good condition. It scrolls smoothly. Comes with key. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
This listing is for a 6" Atlas faceplate and 4 lathe dogs. Three are Atlas 201-1/2" 301-3/4" and 401-1" One is a South Bend 283-1 1/8" The faceplate is 1 1/2"8tpi. Everything is in great condition. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Up for an auction is a used 5C Draw Bar that came with my Hardinge ESM/ TR59 model(9” swing) It is shorter by about 5/8” then my regular Hardinge draw bar. So I’m not sure if it’s from this model or another lathe. Last picture shows the comparison in length. I do not know the exact shipping costs. So please don’t ask me while the auction is running. I do not profit from shipping and packaging so I will charge you what ever is the actual cost. I will try to find a good balance between using the smallest size box with enough padding for safe delivery. Please Note: All my Hardinge related auction items came from the same lathe Hardinge ESM/ TR 59– 9” swing which I got from an elderly Normal 0 MicrosoftInternetExplorer4 gentleman who got ... moreill and deiced to part with some of his stuff. I believe it was used in a home environment so most of the stuff is well taken care of. All sales are final. No returns or exchanges.
NICE ORIGINAL GEAR GUARD DOOR FOR A SOUTH BEND 9" METAL LATHE. HINGE PIN IS STURDY. WITH ONLY VERY LIGHT MOVEMENT. CHART IS CLEAR AND LEGIBLE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Ball Turning Lathe Attachment How-To build PLANS Atlas South Bend + more Plans for a Ball Turning Attachment for a Metal Lathe. Details on fitting to an Atlas and South Bend lathes- but can be adapted to most lathes. Turn balls and sockets up to 3" in diameter to within half a thousandth of an inch. Includes a double sided blueprint, This is an original 5 page magazine article from 1960. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Complete Instructions, Pages are not all shown in Photos SHIPPING TERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. ... more$2.00 for USPS first class mail service or, $5.25 for priority mail service. Add $1.75 to total if you would like insurance with delivery confirmation. $3.00 for shipping to Canada. $5.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
South Bend Heavy 10 lathe with taper attachment. Hard to find 4.5' hardened bed. Ways are in superb shape with only superficial nicks, V's are smooth showing no ware throughout the length. Has double tumbler gear box and the better cam operated apron clutch. Spindle is 2 1/4"8tpi and 1 3/8" through hole. Motor is 1hp 220volt 3 phase and comes with electronics, all you need is power. The taper attachment has a broken locking lever, otherwise its all there. Thread dial is included. Cabinet is 65" x 25" Lots of tooling included also. A Rohm Supra chuck and a Grand live center. A South Bend brand 5" 3-jaw reversible chuck with backing plate. A 7" face plate and a 6" 3-jaw(2piece! Buck chuck no back plate. There is also a Phase 2 wedge type quick-change tool post set which includes a knurling holder, ... moreboring, parting and 2x turning holders. Along with miscellaneous carbide tooling and a HSS boring bar set, like new. There is also the tailstock and carriage locking wrenches. This is a real nice machine. And very heavy, probably about 1000-1100 lbs. I have a forklift so I can load it in the back of your pickup. If you want to ship you must contact me BEFORE bidding. Its your responsibility to deal with the trucking company. I will charge an additional $250 to palletize, pad and strap the machine. Local pickup preferred and cash only. Questions? Please ask, and please avoid asking when there is 5 minutes left in the auction. Thanks for looking. Posted with
Excellent J.H. Williams RH Parting Tool Holder#2020R with 9/16" Armstrong Parting Tool for Lathe 3/8" x 13/16" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong Straight Tool Holder#2010S for Lathe 1/4" Tool capacity. 5 degree tool angle, 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong LH Tool Holder#2010L for Lathe 1/4" Tool capacity. 5 degree tool angle, 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong RH Tool Holder#2010R for Lathe 1/4" Tool capacity. 5 degree tool angle, 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong Straight Parting Tool and Holder#2020S for Lathe Includes 9/16" parting tool. 3/8" x 13/16" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong Threading Tool and Holder#2050 for Lathe Threading tool looks to have never been sharpened. 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong Knurling Tool#2040 for Lathe Very good diagonal knurls. 3/8" x 3/4" shank. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Very Good Logan Rocker Tool Post Assembly for Lathe 3 1/4" Tall lantern with 7/16" x 2" holder slot. Base block is 1 3/8" x 1 3/8" x 1/4" includes Williams#583 wrench. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Very Good Single Bearing Craftsman Live Center for Lathe 2 MT arbor. Smooth bearing, good point with minor scratches, arbor has some light pitting. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Very Good Double Bearing Live Center for Lathe 2 MT arbor. Smooth bearings, very good point with light scratches, point tapers up to 1" plus, USA bearings, no manufacturers markings. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
This is a used 4 Jaw Chuck for an Atlas or Craftsman 10" Lathe. It has surface rust on the outside. Two of the adjusting screws are broken on the ends. This can be seen in the pics. It still functions and could probably be repaired. It is 6" in diameter. 1.5 x 8 TPI.
Large 1 1/2" Heavy Duty J.H. Williams#6 Lathe Dog for Lathe Tail has some grinding to re-size to approx. 5/8" Overall length is + or- 8" These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
This is a Genuine South Bend 9" steady rest. Has brand new. Brass fingers. Original paint. Still has South Bend decal. Unit code SR100. Payment via Paypal only unless alternate arrangements are made before bidding. No handling charge on orders shipped to US addresses. A $10.00 handling charge will be added to orders shipping outside the USA. Local pick up is an option on all items. I DO NOT MAKE SECOND CHANCE OFFERS. Simple return policy. If you don't like it. Return it for a full refund. Buyer is responsible for return shipping charges. Pack items well and insure for full value. I will not accept returns that are damaged in transit.
Excellent 6" Logan#LA-170 Drive/Face Plate for Lathe 1 1/2" x 8TPI threads. 9/16" face plate slots, 3/4" drive slot. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent 6" 4 Jaw Independent Chuck USA Made in Toledo OH 1 1/2" x 8TPI thread back plate. Reversible jaws, excellent key included. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
South Bend Lathe Apron Worm Gear and Clutch assembly. 9 inch and 10K( light 10) Model A and B. All Gears are in very good condition. Clutch assembly is in very good condition. Includes all items shown. Unit is missing the spring retaining clip for the end of the screw. I have pointed out the area on the screw where the spring clip goes in the photo with a pencil pointing to it. It will be needed for the assembly but is not included. Shipping is a flat rate of $5.40 to any of the US 50 States. I will not ship outside the US 50 States. Payment to be by Pay Pal.
South Bend Lathe Apron Hand Wheel and pinion. 9 inch and 10K( light 10) Very nice hand wheel and pinion. No breaks or repairs. Pinion has clean sharp teeth and in very good condition. See photos. Shipping is a flat rate of $10.65 to any of the US 50 States. I will not ship outside the US 50 States. Payment to be by Pay Pal.
Shipping to USA only. No charge for pick up in Vista CA 92083 This auction is for the South Bend lathe dog-driver faceplate shown in the photos below. Fits onto any 1½#8tpi spindle. Thanks for looking!
YOU ARE BIDDING ON A STEADY REST FOR A 16 INCH SOUTHBEND LATHE. IT IS 8 INCHES FROM THE FLAT TO THE SPLIT. IT WILL BE DISASSEMBLED FOR SHIPPING TO FIT FLAT RATE BOX. SOUTH BEND LATHE
There are items that I am not very familiar with and let the pictures do the talking. Hence. They are part of the description of the item. Please enlarge and review them before bidding. All items are sold AS-IS! By placing a bid you are acknowledging you have read our terms and agree to our terms for this transaction. This is a true auction- you are responsible for research and asking appropriate questions. All sales final. No refunds. Found this at an Estate sale among other machinist books. Pre-owned. Please see and enlarge all photos for details and condition. These are actual photos of item you will receive. Please visit my Ebay store for other wonderful items: Please email(through Ebay) me with any questions. And please read store policy below before bidding. Thank you. PAYMENT If I do not hear from you and/or no payment is made on the ... more4 th day after you have won the item. I will assume that you are not going to pay. If there is open communication, I am willing to work with you. Failure to comply with this will result in a Non-Paying Bidder alert posted to your account and I will re-list the item. I accept PAYPAL. SHIPPING I ship free to the USA ONLY! Which includes a tracking number. Please see a map of the USA.if you live in WA CA OR HI.it will take 5-6 days for delivery. Please do not leave less than 5 stars for something I have no control over. I go GREEN as much as possible and recycle any shipping supplies I can. FEEDBACK Before leaving less than 5 stars. Or negative feedback, please contact me to resolve any issues.
Dumore#44 tool post grinder.Cord is not original but works fine.Comes with 1 extra pulley and 1 belt.I tried it and it runs fine
THIS IS THE LEAD SCREW REVERSER ASSEMBLY FOR THE 10" SOUTH BEND HEAVY LATHE. ALL IS GOOD EXCEPT THE BRASS SQUEEZE LEVER IS BROKEN AND MISSING. THE SPRING AND PLUNGER ARE THERE AND GEARS ARE GOOD. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
THIS IS A HEAD STOCK CASTING FOR THE EARLY HEAVY 10" SOUTH BEND LATHES WITH THE INTEGRAL SPINDLE BEARINGS MACHINED INTO THE CASTING. IT IS IN VERY GOOD CONDITION WITH NO SCORING OR DAMAGE. IT COMES WITH THE TWO OIL CUPS.FELTS,SPRINGS ETC. OTHER THAN NEEDING A CLEANING AND PAINT IS IS EXCELLENT. I HAVE MANY O F THESE HERE AS WELL AS THE LATER CASTINGS WITH BEARING INSERTS. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SET OF 3 ARMSTRONG TOOL HOLDERS#1 S. L, R, 6" long, 1/2" wide for 5/16" bits 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ee82bb505-0xfe-
21 SOUTH BEND COLLETS. NICE THREADS ON EVERYTHING, HAVE NOT BEEN USED IN 30 YEARS- TRAY IS A CR-100, NO MOUNTING ARM, ALSO INCLUDED IS THE CLOSER WHEEL, EVERYTHING YOU SEE IN PIC, CALL WITH QUESTIONS- 716-474-7447 THANKS GARY
Here is a South Bend 9N Lathe Spindle in excellent condition. Spindle thread is 1-1/2X8tpi and the spindle gear is good. Part has no gauling or damage. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13ee894cb44-0xf6-
Here is a South Bend spindle cone assembly for a Hvy 10 lathe. In good original condition with intact brass gear.This part has been in storage the last 25 yrs. US made quality.Shipping flat-rate to the lower 48 is $17 all others must contact seller for actual cost.
Pretty good Union 5" chuck with a 1 3/8" through hole. It is a little scarred up but. The jaws are sharp and tight. It has been disassembled, cleaned, lubed and reassembled. Sorry, no 1/4" key or reverse jaws.
Nice lead screw with threads that do not show a lot of wear. Overall length is 51-1/4" Thread length is 35-3/8" Original nut and collar are included. If you have questions about condition please ask. Parcel select is a 2-9 day delivery time. If that is too long a wait it can be sent priority.
SOUTH BEND 9-10K LATHE PT33NK1 80T IDLER GEAR FINE USED Click to Enlarge FINE USED SOUTH BEND 9-10K LATHE PT33NK1 80 TOOTH IDLER GEAR. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
SOUTH BEND 9-10K LATHE PT32K56NK1 56T GEAR FINE USED Click to Enlarge FINE USED SOUTH BEND 9-10K LATHE PT32K56NK1 56 TOOTH GEAR. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
SOUTH BEND 9-10K LATHE PT32K40NK1 40T GEAR FINE USED Click to Enlarge FINE USED SOUTH BEND 9-10K LATHE PT32K40NK1 40 TOOTH GEAR. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ee8e58711-0x103-
SOUTH BEND 9-10K LATHE BELT TENSION LEVER PT1945N1 FINE USED Click to Enlarge FINE USED ORIGINAL BELT TENSION LEVER PT1945N1. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Free shipping.ONLY when listed for free shipping,applies to 48 continental United States only,ask for quote if anywhere else.All items will be shipped out promptly(within the day Monday through Friday,not including holidays) and with care.All questions will be answered ASAP.I ship USPS only. Paypal charges 10% on shipping and paypal charges 3% plus 3% currency conversion fees for international currency.This does not include packing,boxes,transportation to post office.We keep shipping as low as possible.If shipping seems high talk to ebay and paypal about charging fees on shipping. All items must be paid in the first 2 days or unpaid item procedures wil be followed.A bid equals a commitment and contract so if you do not pay I will NOT cancel the tranasction and WILL use ebay procedures to leave an ebay strike. I am not responsible for postal ... moredamage or loss,insurance may be available upon request,if there is damage open it in front of the postal employees and report the damage to them or refuse the package, so no refunds for this.If a return is authorized by me or other means you must ship the item back in original packing at your cost. Grading of item"New" is unused, Mint" maybe used once but like new, Excellent" has some minor use but great shape,Fine is in normal used shape,no damage to speak of other than regular useage wear, Very good" has some lite dirt,lite wear,maybe a crease or two. Good" has normal useage wear with some dirt,possible creasing and maybe writing but quite readable and a chip depending on item. Fair" Has dirt,a lot of wear,creasing,chips,missing parts, and will need restoration. poor" has major wear and pages loose,dirty,missing,missing pieces and sold for rarity or for parts.Untested" means untested,sold for parts or repair but may work. By buying this item you agree to these rules Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend Lathe Apron Pinion Gear Assembly and Shaft. Part numbers are AS87NK1(Pinion gear assembly) and AS231NK2(Shaft with spring and felt) For South Bend 9 inch and 10K Lathes. Models A or B. Gears are in very good condition with no broken chipped or missing teeth. Shaft is in very good condition. See photos. Shipping is a flat rate of $5.40 to any of the US 50 States. I will not ship outside of the US 50 states. Payment to be by PayPal.
South Bend Lathe Apron Cam Lever. Part number is AS74NK1 For South Bend 9 inch and 10K Lathes. Models A or B. Lever assembly is in very good condition with no breaks or repairs. See photos. Shipping is a flat rate of $5.40 to any of the US 50 States. I will not ship outside of the US 50 states. Payment to be by PayPal.
South Bend Lathe Apron Shifter and Shifter Gear. Part numbers are PT83NK1(Shifter) and PT86NK1(Shifter Gear) For South Bend 9 inch and 10K Lathes. Models A or B. Gear is very good condition with no broken chipped or missing teeth. Shifter is in very good condition. See photos. Shipping is a flat rate of $5.40 to any of the US 50 States. I will not ship outside of the US 50 states. Payment to be by PayPal.
South Bend Lathe Apron Pinion Stud and Gear assembly. Part numbers are AS76NK1(Gear assembly) and AS228NK2(Stud w/Felt) For South Bend 9 inch and 10K Lathes. Models A or B. Gears are in excellent condition with no broken chipped or missing teeth. Stud is in very good condition. See photos. Shipping is a flat rate of $5.40 to any of the US 50 States. I will not ship outside of the US 50 states. Payment to be by PayPal.
South Bend Lathe Apron Casting. For 9 inch and 10K Modes A and B. Part number is PT70NK1. Unit code is A101 Includes the Trough. Pins, oilers and screws shown. Only items shown in the photos are included. Apron casting is in very good condition with no breaks or repairs. Thru holes and threads are in good condition. See photos. Shipping is a flat rate of $10.70 to any of the US 50 States. I will not ship outside of the US 50 states. Payment to be by PayPal.
KENNAMETAL KS2 AR55 Lathe cutting bit. Looks to be in good used condition but I am not a Machinist. I will be glad to answer any questions you have or get you different pics if you need them. See my 100% feedback rating. Buy with confidence.
This is auction is for a pair of Banjo Brackets with Gears for a South Bend 9" Lathe. One of the brackets is broken as can be seen in the picture. The gears are in very good condition.
ORIGINAL SOUTH BEND 9-10 INCH LATHE 5 INCH FACEPLATE. DOGS AND CENTERS LOT Click to Enlarge ORIGINAL SOUTH BEND LATHE 5 INCH FACEPLATE. CENTERS, ADAPTER AND DOGS LOT. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
THIS IS THE SPINDLE CONE PULLEY FOR THE HEAVY 10" SOUTH BEND LATHE IN VERY GOOD CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND 9"METAL LATHE TELESCOPIC STEADY REST ATTACHMENT ORIGINAL PART SOUTH BEND 9" METAL LATHE TELESCOPIC STEADY REST HARD TO FIND. WORKS NICE& CLEAN, FITS SOUTH BEND 9" LATHES BRAND: SOUTH BEND. MADE IN USA. MODEL: SRD-101N CASTINGS: PT116NR1(TOP) PT115N1(BOTTOM) WILL FIT SOUTH BEND 9" LATHES ONLY ITEM HAS ORIGINAL FACTORY PAINT PLEASE SEE PICTURES JAWS OPENS AND CLOSE SMOOTHLY. ITEM IN GOOD CONDITION All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight ... morequote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services of a lift gate are required. The buyer has 7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store.
3/8 bit lathe tool holder left right& center logan south bend atlas 3 way tool lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13eeb24eef8-0xf2-
South Bend 9" Metal Lathe Change Gear Single Arm Bracket Banjo The banjo is used and it is in fine condition. It is o ff of a South Bend 9" metal lathe 54" bed m odel. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
SOUTH BEND LATHE CLAMP FOR COLLET STORAGE RACK AND DRAW BAR SOUTH BEND LATHE CLAMP FOR COLLET STORAGE RACK AND DRAW BAR YOU ARE BIDDING ON USED IN GOOD CONDITION SOUTH BEND LATHE CLAMP FOR COLLET STORAGE RACK AND DRAW BAR PLEASE SEE PICTURES All purchases are expected to be made within 72 hours of close of the auction or will be CONSIDERED for relisting or offered to next highest bidder. So please have your finances in order. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Orders above 149 lbs. must be shipped via freight carrier.We are giving you the chipest freight quote.All estimates are subject to change depending upon drop-off location. Carriers will assess an extra charge if delivery is made to a residential area and/or if the services of a lift ... moregate are required. The buyer has 7 days to return the item(the buyer pays shipping fees) The item will be refunded. All e-mails will be responded within 12-24 Hours. You may e-mail us anytime Please visit my store.
All in good condition. No bad ball bearings or mising ones.
I am not sure what make of lathe this fits. The bore is 7/16" 1/8" keyway, 3/8" wide and a 20 DP. All teeth are good, no nicks or missing ones.
One used#1 Morse Taper Finish Hand Reamer. HSS I do combine shipping. Item in the picture is the one you will receive PayPal only.
One used#2 Morse Taper Finish Hand Reamer. HSS I do combine shipping. Item in the picture is the one you will receive PayPal only.
One used USA Drill Bit 25/32. 2MT shank, 6 1/2" drill length, 10" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One used USA Drill Bit 23/32. 2MT shank, 6" drill length, 9 1/2" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13eed0c798e-0xf9-
One used USA Drill Bit 19/32. 2MT shank, 5 1/2" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One used USA Drill Bit 3/4. 2MT shank, 6" drill length, 10" OAL, HSS, 118 degree, factory grind I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Spindle take up nut from a 9" South Bend Workshop model metal lathe. In good condition and come as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
Original South Bend 80 tooth idler gear for 9 and 10K lathes. Very little wear but two chipped teeth as shown in photos.
This auction is for a lot of 10 used heavy duty Brazed carbide lathe cutter bits in 1/2" shank made by Carboloy. Sandvik, Iscar, Armide, Sandstrom, and others Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
4" DIAMETER 4 JAW LATHE CHUCK W/ KEY THIS CAME OFF A SMALL ATLAS CRAFTSMAN LATHE. OPERATES SMOOTHLY. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
JACOBS KEYLESS DRILL CHUCK WITH MT 2 MOUNT 3/64" 1/2 CAPACITY OPERATES SMOOTHLY JT 33 TAPER THIS CHUCK HAS LARGE KNURLED GRIPS ALLOWING PLENTY OF TIGHTE NING TO RQUE FOR NO SLIP OPERATION! IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. ... morePLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
THREAD DIAL AND BOLT FOR A 6" ATLAS 618 CRAFTSMAN 101 LATHE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ... moreALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
LIVE CENTER MT 2 MOUNT IN IT'S BOX LOOKS GREAT IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW ... moreIT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
South Bend Lathe 9 inch and 10K( light 10) Half Nut Set with bolts. For Models A and B. Nice clean set of half nuts for South Bend 9 inch or 10K(light 10) lathe. Very good threads. Over all very good condition. See photos. Shipping is a flat rate of $5.40 to any of the US 50 States. I will not ship outside the US 50 States. Payment to be by Pay Pal.
5 DAY AUCTION! HO W TO RUN A LATHE BY SOUTH BEND LATHE WORKS INSTRUCTION BOOK ON HOW TO RUN SOUTH BEND LATHES WITH INFO THAT CAN BE APPLIED TO M OST OTHER MODEL LATHES AS WELL 1 30 P AG ES 19 49. EDITION# 49 VER Y NICE CONDITION YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND ... moreCHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
A local Vocational Trade School is in the process of closing its Machine Shop program. As a result there will be an assortment of Tools and Accessories available for sale. I will list these items as they are released for disposition. I will do my best to describe these items as accurately as possible. However. Sale is final so please feel free to a sk any questions that you might have. Thank You One of the satellite machine shops is presently being liquidated. The Lathe Chucks. Face Plates and other miscellaneous tools that have been in storage are now being released for disposition. Offered here is an original 6" South Bend 4 Jaw Chuck. Model 4206. This chuck was mfg'd. for South Bend by Skinner Chuck Company. It has a 1-3/8" bore and comes with a chuck wrench. The mounting thread is 2-1/4" x 8. The chuck could use a cleaning, ... moreas it has been sitting in storage and not used in a while. I did notice that there is a little play in the jaws toward and away from center, but the jaws seem to fit nicely in the slide with no side to side play that I could determine. Should make a nice original chuck for your South Bend.
The following auction is for a South Bend 9" Metal Lathe 32T 32 Tooth Change Gear 32 tooth change gear. Single keyed 9/16" bore. It is 3/8" thick. It is in fine condition with some wear. The gear teeth are in fine condition with some wear. It is o ff of a South Bend 9" Metal Lathe See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.00 for USPS 1st Class Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13eefdce2f9-0xff-
South Bend heavy 9/ 9 Jr. metal lathe Cast Apron housing with bolts. Cleaned and ready for paint, Good used condition. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible. If you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will ... moremake other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others,
I apologize for the quality of the pictures.There is another lathe sitting in front of this machine This is a nice South Bend"Fourteen" Lathe. It is a 14 x 36 lathe with 8" 3-Jaw Chuck and Armstrong Quick Change Tool Post. We have powered it up and it sounds good and everything seems to work as it should. Handles turn smoothly and not an excessive amount of backlash. It is wired for 230 volt/ 3 phase electric. There is some wear on the ways but nothing excessive. Loading at our facility is free of charge. Buyer pays all shipping. Ohio Sales Tax Rules Apply. Payment must be received within 5 days of close of sale. Sold AS IS.
Original gear cover mounting bracket from a South Bend 9" Workshop lathe. In great condition and comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
For Sale: 3 Nearly identical lathe chuck jaws. each one has 7 teeth and 3 different platforms The only difference between the 3 is where the first tooth is seated. 2 3/8 in length each. Feel free to contact us with any questions you may have Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. ... moreAll items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me pers
This listing is for a lot of 33 pc. of 3/8" tool steel. Some are carbide tipped. Names include Mo Max Besley Carboloy. Others. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13ef2e54a0b-0xfe-
used 2-1/4 x 8 tpi lathe spindle nose protector.
nice jacobs 3 a taper chuck 3/4 or more bit size with key
VINTAGE JACOBS CHUCK 6AE PLAIN BEARING CHUCK Cap 0-1/2 E TAPER LATHE DRILL WITH KEY. I'M LISTING IT AS USED BUT IT LOOKS UNUSED I SEE LIGHT STAINING THAT WAS PROBABLY FROM THE ORIGINAL PACKAGING IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy ... morebidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
Nice- Original Williams knurling tool. Stamped"TH-0-K" on one side and"J.H. WILLIAMS U.S.A. on the other. Shank is 3" long. 7/8" high and 3/8" thick. In fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ef388eec1-0x107-
Very Good Armstrong Storage Box for Lathe Tool Holders Storage for eight tool holders plus compartment for tools. 9 3/4" x 7 3/8" x 1 7/8" Original paint, in good condition in interior and fair condition on exterior. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Excellent Armstrong Boring Bar Holder#2080 for Lathe 3/8" x 3/4" Shank. Includes one 1/4" boring bar and one 3/8" boring bar. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
This is a steel and Aluminum guide of some sort as pictured. from a Vintage 9" South Bend Workshop Metal Lathe with a 9" swing and 3 foot Bed. It is Serial#55177 Catalog No. 405-Y. Made by South Bend Engine Lathes In South Bend Indiana USA. The previous owner told me it was from 1937 but I don't have verification of that. It is worn and somewhat rusty but in good working condition. It mounts on the back of the lathe ways Overall@ 29 5/8" long. Local pick-up available. I will combine shipping on multiple purchases when possible.
Up for your consideration is an Ace#2020S straight cut-off/parting tool holder. This is a used tool holder in excellent condition. The mounting shank is 5/16” X 3/4” and it takes 3/32” X 5/8” blades. To be sold as cut off tool with blade. It’s ready to be used. The pictures are of the actual item being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license• Payment must be made within 4 days
Up for your consideration is an Ace Armstrong#2020R right hand cut off/parting tool holder. This is a used tool holder in very good condition. The mounting shank is 5/16” X 3/4” and it takes 3/32” X 5/8” blades. To be sold as cut off tool with blade. It’s ready to be used. The pictures are of the actual item being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license• Payment must be made within 4 days