In 
 
Order by: 
Available to: 
Price: 
 - 
$
11,800
Buy It Now
Free Shipping
Condition: New
Location: USA
$
2,699.1
Buy It Now
$199 Shipping
Condition: New
Location: Fort Myers,FL,USA
$
14,137
Buy It Now
Free Shipping
Condition: New
Location: El Dorado Springs,MO,USA
$
310
Buy It Now
$0 Shipping
Condition: New
Location: Bancroft,NE,USA
$
110
Buy It Now
$20 Shipping
Condition: Used
Location: East Troy,WI,USA
$
650
Buy It Now
Free Shipping
Condition: New
Location: Narvon,PA,USA
$
5,400
Buy It Now
Free Shipping
Condition: New
Location: Joppa,MD,USA
Price: $5.400.00 Condition: New Features: Handles light and heavy-duty clean-up in construction. Municipal, and industrial applications• Bi-directional ... morebroom sweeps forward to pick up dirt; reverses to collect asphalt millings. Rock, and construction debris• To dump. Just lift and tilt; no chains are required• No front caster wheel; works easily next to walls. Curbs and obstacles• Replaceable bolt-on cutting edge on bucket• Mounts to skid-steer quick-attach Available with poly or poly/wire brush• Direct-drive brush motors eliminate chains and sprockets Sweeps in Two Directions Handles light and heavy-duty clean-up in construction. Municipal and industrial applications Bi-directional broom sweeps forward to pick up dirt; reverses to collect asphalt millings, rock and construction debris To dump. Just lift and tilt; no chains are required No front caster wheel; works easily next to walss. Curbs and obstacles Replaceablt bolt-on cutting edge on bucket Mounts to skid steer quick-attach Available with poly or poly/wire brush Direct drive brush motors eliminate chains and sprockets Optional Gutter Brush(comes with either Poly or Wire Brush) Water Spray Kit with 25 Gallon Tank Sweeping Width: 84 in Overall Width: 90 in Overall Height: 30 in Overall Length: 60 in Brush Diameter: 26 in Heaped Capacity: 19.8 cu ft GPM Range: 10 to 18 gpm PSI Range: 2.000 to 3,500 Operating Weight: 1033
$
2,090
Buy It Now
$0 Shipping
Condition: New
Location: Monroe,WI,USA
Item Description Normal 0 false false false EN-US X-NONE X-NONE 7 positions from 27-3/4" to 99-3/4" 2,000 lb. Lift Capacity Make: Haugen Model: ... moreMIJ-SKD Lot# MD-Haugen Skid Steer Jib Price: $1.475.00 Weight: 380.00 lbs. Length: 30.00 in. Width: 100.00 in. Height: 20.00 in. Telescopes from 5 to 8 feet. 15 degree built-in angle to maximize roll back. 7 positions( manually adjustable) Equipped with a 5 ton eye hook. Attachment will fit most models with new style Quick Attach: ASV. Bobcat, Boxer, Case, Cat, Commander, Daewoo, Deere, Dingo, Doosan, Earthforce, Fecon, Finn, Ford, Gehl, Hydramac, IHI, Icon, JCB, Kubota, Mustang, New Holland, Polaris, Scattrak, Supertrak, Swinger, Takeuchi, Terex, Thomas, Toyota, Universal, Vermeer, Volvo, Wirrmar, Yanmar Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Contact Seller for Additional Shipping Fees Canada buyer pays extra shipping fees. We ship to business locations. For residential locations other charges will apply. Normal 0 false false false EN-US X-NONE X-NONE Call Now: 608-325-1140 Skid Loader Source is a division of M& D Truck and Equipment Sales located in Monroe. WI With a combined business experience of over 22 years. We opened up our attachment division online with the idea of offering customers quality attachments at fair prices. Our ability to buy in volume allows us to extend our discounts to you. Buy with confidence; we stand by our name and our product. Location We are located in Monroe. WI. 1 hour Southwest of Madison Wisconsin, 3 Hours Northwest of Chicago Illinois. We are open Monday through Friday from 8:00 A:M to 5:00 P:M and Saturday by appointment only. Contact Please feel free to contact us at 608-325-1140 with any questions. Payment Terms In addition to PayPal and Credit Card. Cashier’s checks, bank to bank transfers, Personal or business checks(must clear our account before equipment is released, 3-4 business days to clear our account) are accepted as payment. Out of state buyers are tax exe
$
1,680
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Dania,FL,USA
$
1,500
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Dania,FL,USA
$
1,729
Buy It Now
$179 Shipping
Condition: New
Location: Waco,GA,USA
$
3,500
Buy It Now
Free Shipping
Condition: Used
Location: Buffalo,WY,USA
$
4,695
Buy It Now
Free Shipping
Condition: New
Location: Tipton,IA,USA
$
3,295
Buy It Now
$0 Shipping
Condition: New
Location: Brownsboro,AL,USA
$
1,175
Buy It Now
$0 Shipping
Condition: New
Location: Latrobe,PA,USA
$
117.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
12,500
Buy It Now
Free Shipping
Condition: New
Location: El Dorado Springs,MO,USA
$
2,350
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
2,100
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
FFC Bradco 84" Medium-Duty Snow Bucket Only $1500 plus $299 shipping Fits all brands of Skid Steer made today We can ship to 48 States Model 11184 ... moreWeight 733 lbs Width 84" Height 29.9" Depth 42" Leading Edge 29.7 Capacity Struck/Heaped 1.4 yd/1.47 yd(cubic) Seller Jim Goodall Equipment Sales Ft. Myers. FL 33912 Jim Goodall Cell 239-776-5725 Jorge(Español) 239) 450-8017 Open weekdays 9-6 EST. Subject to FL sales tax if shipped in FL dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14138d57dfc-0xff-
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Walton,KY,USA
$
8,820
Buy It Now
Free Shipping
Condition: New
Location: Joppa,MD,USA
Price: $6.400.00 Condition: New The Spartan Skid Steer universal mount 55 Gallon BARREL HANDLER attachment allows you to scoop up liquids and solids quickly ... moreand easily. This BARREL HANDLER comes with a heavy duty dual hydraulic cylinder rotating base that rotates up to 127 ° degrees. With the optional insert. The BARREL HANDLER will adapt to handle 30 gallon drums. The Barrel handler is ideal for the oil, scrap iron and hazardous waste industries. You can scoop up waste in solid or liquid form safely from the operator’s seat of your skid steer loader. The Barrel handler will not damage plastic or metal barrels, and allows you to pour liquids or solids with precision. Plastic barrels won’t slip because of the unique barrel lift support. FEATURES• Fits on all the Skid Steers equipped with the Universal Quick’Tach. Can be modified to fit on specialty machines such as excavators. Backhoes and telehandlers. Handles 55 gal and 30 gal drums(with Optional Insert sold separatley Part# SE-3002) Handles metal and plastic Barrels. Mounted on a dual hydraulic rotating base. Can rotate up to 127 ° degrees. Guaranteed not to crush barrels. The inside of the BARREL HANDLER arms are lined with anti static rubber to prevent from slippage and electric shock. Specialty barrel handlers to handle 110 gallon and 85 gallon barrels are available on request. SCOOP AND POUR SOLID OR LIQUID CONTENT WITH PRECISION. SAFETY AND SECURITY! The Barrel Handler is currently being used in the following industries: Hazardous waste removal• Oil and gas industry• Scrap yard• Recycling• Wineries• Honey• Government Base Type: Hydraulic 127° Rotating Base Barrel Capacity: 55 Gallon Barrel Capacity(Optional) n/a Lift Capacity: 1200 lbs Cylinder: 2" x 2.5" bore x 6" stroke Overall Width: 60.06 in Overall Height: 18.37 in Overall Length: 60.93 in Overall Grapple Opening: 44.20 in Rotating Degree: 127° Operating Weight: 515 lbs.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-141df978a45-0xf9-
$
49
Buy It Now
$7.95 Shipping
Condition: New
Location: Boca Raton,FL,USA
$
22,184
Buy It Now
Free Shipping
Condition: New
Location: USA
$
37
Buy It Now
$0 Shipping
Condition: New
Location: Ripon,WI,USA
$
11,199
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
$
28,910
Buy It Now
Free Shipping
Condition: New
Location: USA
$
149.99
Buy It Now
$9.95 Shipping
Condition: New
Location: Pueblo,CO,USA
$
17.58
Buy It Now
$0 Shipping
Condition: New
Location: Circle Pines,MN,USA
$
8,299
Buy It Now
$500 Shipping
Condition: New
Location: Fort Myers,FL,USA
$
114.99
Buy It Now
$0 Shipping
Condition: New
Location: Renville,MN,USA
$
1,699
Buy It Now
$199 Shipping
Condition: New
Location: Fort Myers,FL,USA
$
699.99
Buy It Now
$0 Shipping
Condition: New
Location: Collierville,TN,USA
$
550
Buy It Now
Free Shipping
Condition: New
Location: Elkhart Lake,WI,USA
$
213.05
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
240
Buy It Now
Free Shipping
Condition: New – Open box
Location: Cartersville,GA,USA
$
99.84
Buy It Now
$0 Shipping
Condition: New
Location: Utica,NY,USA
$
3.2
Buy It Now
$3.79 Shipping
Condition: New
Location: Volcano,HI,USA
$
9,000
Buy It Now
$0 Shipping
Condition: Used
Location: Tyler,TX,USA
$
14,199
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
$
22.7
Buy It Now
$0 Shipping
Condition: New
Location: Neponset,IL,USA
$
774.99
Buy It Now
$0 Shipping
Condition: New
Location: Collierville,TN,USA
$
3,999
Buy It Now
Free Shipping
Condition: New
Location: Weedsport,NY,USA
$
27,900
Buy It Now
$999 Shipping
Condition: New
Location: Fort Myers,FL,USA
$
228.05
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
999
Buy It Now
$249 Shipping
Condition: New
Location: Waco,GA,USA
$
2,501
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
This auction is for a NEW 2013 CID Xtreme Tree And Post Puller Skid Steer Attachment. This unit is a Xtreme Duty Tree And Post Puller. This unit is standard ... moretwo pin quick attach and will fit any skid steer two pin quick attach. NEW 2013 CID Xtreme Tree And Post Puller For A Skid Steer Loader Fully Hydraulic 13 1/2" Max Opening Can Grip And Pull Under Brush Trees And Fence Posts Powered By A 2" X 10" Cylinder Hoses and Flat Face Couplers Powered Coat Finish AWESOME ATTACHMENT WE HAVE OVER 25 HOURS ON OURS AND WE LOVE IT A MUST HAVE! If Not In Stock It Will Ship Factory Direct Please Alow Approx 10 Business For Shipment Also In Stock At Mark Supply Co Please Check Stock This unit is UNREAL WHAT YOU CAN DO WITH IT! It makes cutting trees fast and easy! This unit SELLS FOR $1.842.00 NEW! WE ARE 1 OF CID Xtreme's TOP FIVE DEALERS CALL US WITH ANY QUESTIONS ON OUR PRODUCTS! WE ARE OPEN FOR BUSINESS 24/7. WE WILL NOT BE UNDER SOLD! NO JUNK HERE! PROUDLY MADE IN THE USA! We can ship no problem! Please just email or call for a freight quote 24/7. We Give a 5 Star Service on Ebay and are ready to help in any way. If you have any questions please ask I Will be glad to help Just Email or Call(814)658-3066 Thanks Nick Payment: For payment we will take the following: $250.00 Paypal deposit due with in 24 hours of the auction close. Remainder due with in 5 business days. Shipping Costs: We DO NOT mark up any shipping prices. What it costs me it will cost you. There is no pallet fee. No loading fee and no banding fee. We get a 70% discount with our freight broker on LTL shipments and we pass that along to you. We make no money on shipping! Please understand diesel fuel is almost $5.00 a gallon. We are glad to help in any way with customer pickups also. Please when letting feedback on the DSR remember We are Providing a 5 Star Service and Would Like a Five Star DSR Rating In Return. Please if you have any questions call us we are glad to help(814)658-3066 Thanks Nick. PA Sales Tax: Please Read! PA Re
$
4,090
Buy It Now
$0 Shipping
Condition: New
Location: Alexandria,MN,USA
$
30.59
Buy It Now
$9.7 Shipping
Condition: New – Open box
Location: USA
$
337.99
Buy It Now
$0 Shipping
Condition: New
Location: Des Moines,IA,USA
$
2,795
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
759
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
60
Buy It Now
$0 Shipping
Condition: New
Location: Birmingham,AL,USA
$
175.65
Buy It Now
$89 Shipping
Condition: New – Open box
Location: USA
$
8,250
Buy It Now
Free Shipping
Condition: New
Location: El Dorado Springs,MO,USA
$
11,999
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
$
131.25
Buy It Now
$19.99 Shipping
Condition: New – Open box
Location: USA
$
8,230.5
Buy It Now
Free Shipping
Condition: New
Location: USA
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Walton,KY,USA
$
1,705
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
Blue Diamond NEW 44" Standard Duty Low Profile Snow& Mulch Bucket Mini Skid Steer Attachment- Call for Lead Time USA Manufactured by BLUE DIAMOND ... moreATTACHMENTS in Knoxville. TN For Mini Skid Steers and Walk Behinds SPECIFICATIONS: Low Profile BLUE DIAMOND OFFERS A 1 YEAR LIMITED WARRANTY ON THIS PRODUCT We are an authorized Blue Diamond Distributor so please contact us if looking for any of their other attachments Shipped Via Truck Freight Please call with zip code for shipping quote before you commit to purchasing For further information or any questions please contact: Gregg Kersey at Marshall Machinery Phone: 570-729-7117 Please check all serial numbers and casting numbers on items before bidding. We can not be held responsible for shipping the wrong product. We would be happy to answer any questions that may concern your product. Call Gregg Kersey 570-729-7117 We offer no warranty on our items unless stated otherwise by the manufacturer. We accept most. If not all, major credit cards, paypal, cash, and cashiers check. If you wish to use a personal check you must contact us via phone to confirm. If you wish to use a check in person that is completely fine. Pennsylvania state sales tax(6% applies to all products sold from Marshall Machinery. Sales tax will be charged to Pennsylvania. New York, New Jersey, and Maryland. Winning bids are available for shipping or pick-up. It’s your call. Either way will work. If you need an exact shipping quote please call with your zip code. Phone number, and address ready and we’d be happy to assist you. Shipping costs are likely to change depending on location. Marshall Machinery is located at: 348 Bethel School Rd. Honesdale. PA 18431( Google Map. Yahoo! Map. MapQuest) RT. 652 Mid-way between Beach Lake and Indian Orchard Our store hours are open Monday– Saturday. 8am– 5pm Feel free to give us a call at: 570-729-7117 Thank you for giving our item a look Gregg Kersey Marshall Machinery Inc. 570-729-7117 Help Measuring Your Tire
$
5,145
Buy It Now
Free Shipping
Condition: New
Location: Joppa,MD,USA
Price: $4.900.00 Condition: New Features: Handles light and heavy-duty clean-up in construction. Municipal, and industrial applications• Bi-directional ... morebroom sweeps forward to pick up dirt; reverses to collect asphalt millings. Rock, and construction debris• To dump. Just lift and tilt; no chains are required• No front caster wheel; works easily next to walls. Curbs and obstacles• Replaceable bolt-on cutting edge on bucket• Mounts to skid-steer quick-attach Available with poly or poly/wire brush• Direct-drive brush motors eliminate chains and sprockets Sweeps in Two Directions Handles light and heavy-duty clean-up in construction. Municipal and industrial applications Bi-directional broom sweeps forward to pick up dirt; reverses to collect asphalt millings, rock and construction debris To dump. Just lift and tilt; no chains are required No front caster wheel; works easily next to walss. Curbs and obstacles Replaceablt bolt-on cutting edge on bucket Mounts to skid steer quick-attach Available with poly or poly/wire brush Direct drive brush motors eliminate chains and sprockets Optional Gutter Brush(comes with either Poly or Wire Brush) Water Spray Kit with 25 Gallon Tank Sweeping Width: 72 in Overall Width: 78 in Overall Height: 30 in Overall Length: 60 in Brush Diameter: 26 in Heaped Capacity: 16.8 cu ft GPM Range: 10 to 18 gpm PSI Range: 2.000 to 3,500 Operating Weight: 916.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146aa08d8e8-0x112-
 In 

Past Items  
 
Used hammer in excellent condition. Fresh paint and new decals. 2 new chisel bits included. Can ship at buyers expense.
Skid Steer Loader- 2006 John Deere 320 including standard fork and bucket Year: 2006 Model: 320 Hours: 1445 Fuel: Diesel Serial# T00320A120990 Rubber tired skid steer loader J.D. Diesel Hyrdostatic with 3rd value& ROPS Comes with standard fork and bucket attachment OPTIONAL extra cost: Bradco 8609X Hydraulic Backhoe Attachment Price: $4.900 Serial# 23557 Fits 18669 Prostar Equipment Inc prostarequipment.com Address: 75 Windsor Ave. Mineola, NY. 11501. Tel: 516-741-1000
Normal 0 false false false EN-US ZH-CN X-NONE 50% Rubber 1430 Original Hours-1 Owner Aux Hydros 78 Dirt Bucket ORPS Machine Runs Excellent Tin and Sheet Metal Very Good Prostar Equipment Inc. Prostarequipment.com. Address: 75 Windsor Ave. Mineola NY 11501 Tel: 516.741.1000.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1406206b6a2-0x103-
Shipping Cost Only $199 to the 48 States! Bradco Brand 40" Snow Blower. General Specifications: Width: 42.7" 109cm) Length: 33.1" 84cm) Height: 45" 114cm) Weight: 320 lbs(144 kg) Drive: Belt(12:1 ratio) RPM@ 8 GPM: 1200. Pressure: 1500- 3000 psi. Should fit all Brands of Mini Skid Steer except the Bobcat MT series and the Kanga Kid. We have a full range of Dingo Mounted Attachments. Machines Available: Bobcat S650 with Bucket- $21.900 Toro Dingo TX420 with Bucket- $7.495. Bobcat MT55 with Bucket- $6.995. ~~~~~~ Toro Dingo Mounted Attachments ~~~~~~. Land Leveler- $295- Used. Toro Multi Purpose Tool- $295- Used. Poor Man's Backhoe- $495- New. Bradco 6 Way Dozer Blade- $1.695- New. CID Brand Toro Dingo Mounted Pallet Fork's- New- $495. CID Brand Toro Dingo Mounted Tree Boom- New- $395. CID Brand Auger Drive with ... morea New 9" Bit- $1.995- New. Auger Bits- 4" up to 36" New. Toro Dingo Trencher with 48" Digging Depth- Used- $1.895 Replacement Trencher Teeth- $4.95 each- New 44" CID Brand Toro Dingo Mounted Root Grapple Bucket- New- $995- Open Tine Bottom. 44" CID Brand Toro Dingo Mounted Bucket Grapple- New- $995- Solid Bottom. 34" CID Brand Smooth Bucket- New- $395 34" CID Brand Tooth Bucket- New- $495. 42" CID Brand Smooth Bucket- New- $495. 42" CID Brand Tooth Bucket- New- $595. 48" CID Brand Smooth Bucket- New- $495. 48" CID Brand Smooth Bucket with Tooth Bar- $695. 42" Toro Dingo Smooth Bucket- Used- $300. Tooth Bar- $200- New. Blank Dingo Mounting Plate- $125. I have Lots of Full Size Skid Steer Attachments Available- CID Brand Auger Drive with a New 9" Bit $1.995- New. Auger Bits- 4" up to 36" Skid Steer Mounted Pallet Forks with 42" Fork's- $500- Used. CID Brand Steer Mounted Pallet Fork's with 48" Fork's- $649- New. CID Brand Pallet Fork Back Plate Only- $445- New. Skid Steer Buckets- 60" up to 84" $500- Used. Skid Steer Buckets- 60" up to 84"
Available for sale is a 2004 Bobcat T250 skid steer loader with 3137 hours. We have just serviced this unit and all functions are working as they should. As such. It is being sold as job ready needing nothing. The T250 is powered by an 81 hp turbocharged diesel engine, has an operating weight of 9350 lbs, operating load of 3679 lbs(50% of tip) and has a max dump height of 12' 2" You won't find a comparable unit at a better price, so take advantage of this opportunity before it's gone! Bobcat is a favorite of industry experts due to the reputation of a rugged build and reliable performance. We can ship this unit to any location with a dock/forklift at the buyer's expense. Serious buyers. Please contact us for shipping quotes or with any questions through ebay messaging, or call us at 1-866-444-4116. Paypal can be used ... morefor a deposit. But we ask that the balance on items over $2500 be paid for via certified funds, cash, or bank wire.
| | NEW HOLLAND L-35 UTILITY SKID STEER LOADER OPERATORS MANUAL* This is an operators manual for the New Holland L-35 utility loader. 51 pages- in very good shape. I offer a money back gaurantee. No reserve. Buyer to pay $3.85 shipping in the U.S. We can combine shipping to save you some $$. Thanks! We take pride in being honest and in pleasing our customers. We offer a money back gaurantee. Simply send an email if you have any questions or problems with any items we sell! Please complete payment within 7 days. Items are shipped as fast as possible. Click to View Image Album Payment, Payment expected within 7 days- thanks. I accept the following forms of payment: PayPal Shipping& Handling, $3.85 USPS First-Class Mail® Policies, Refunds, We don't believe in negative feedbacks. We offer a money back guarantee. We believe in taking ... morecare of the people who take the time to bid on our items. Thanks! SHIPPING, PLEASE UNDERSTAND THAT WE SHIP AS FAST AS WE CAN. AS THOUSANDS OF FEEDBACKS WILL SUPPORT. BUT OCCASSIONALY THE USPS SHIPPING SLOWS DOWN. WE DO NOT DELIVER THE ITEMS- THE USPS DOES. PLEASE SEND AN EMAIL IF ITEM HASN'T ARRIVED OR IF YOU HAVE A PROBLEM- CLEARLY WITH 100% FEEDBACK WE ARE HONEST SO PLEASE HAVE PATIENCE. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today! 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-140647721a0-0xff-
Nice 1997 Bobcat 751 diesel. 1950 hours. New tires, runs and operates great, ready to work. Everything works, comes with 60" bucket. Has some concrete spatter on it. Cash or wire transfer, paypal for deposit only. Local pickup preferred. For sale locally, could end at anytime. Call 517-490-3105
| | JOHN DEERE 375 570 575 SKID STEER LOADERS SERVICE REPAIR& OPERATION TEST MANUAL, This is a technical repair and operation and test manual for the John Deere 375 570 575 skid-steer loaders. TM-1359- dated 1986. 14 sections. In very good condition in JD binder. I offer a money back gaurantee. No reserve. Buyer to pay $4.95 shipping in the U.S. We can combine shipping to save you some $$. Thanks! We take pride in being honest and in pleasing our customers. We offer a money back gaurantee. Simply send an email if you have any questions or problems with any items we sell! Please complete payment within 7 days. Items are shipped as fast as possible. Click to View Image Album Click to View Image Album Payment, Payment expected within 7 days- thanks. I accept the following forms of payment: PayPal Shipping& Handling, $4.95 USPS Media ... moreMail® Policies, Refunds, We don't believe in negative feedbacks. We offer a money back guarantee. We believe in taking care of the people who take the time to bid on our items. Thanks! SHIPPING, PLEASE UNDERSTAND THAT WE SHIP AS FAST AS WE CAN. AS THOUSANDS OF FEEDBACKS WILL SUPPORT. BUT OCCASSIONALY THE USPS SHIPPING SLOWS DOWN. WE DO NOT DELIVER THE ITEMS- THE USPS DOES. PLEASE SEND AN EMAIL IF ITEM HASN'T ARRIVED OR IF YOU HAVE A PROBLEM- CLEARLY WITH 100% FEEDBACK WE ARE HONEST SO PLEASE HAVE PATIENCE. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
Hello. You are bidding on used literature from my inventory. It is in used condition. Please check out my other listings! Do a member search for mingo120 and for generaljuncque for more"STUFF" Thank you, Joe God Bless and happy bidding! Powered by
This is a 2000 model with 1800 original hours. Its a tight machine and it runs like a machine with low hours should. It has brand new tires and is ready to hit the jobsite. It is an all around good machine. I bought it off a rental company that was not doing too well and needed to liquidate some equipment. I havent noticed any leaks on it and I dont know of anything that needs to be fixed on it. In other words-it runs and operates as it should. Its a great midsized machine. Feel free to contact Kyle with any questions at 918-two three one-2815. Inspections are always welcome. We can help arrange freight or get quotes for you. Paypal is accepted but is subject to a 3% charge to cover paypal fees. Machine will be held until check is cleared. Wire transfer or cash is preferred.
You are looking at a very nice 2006 John Deere CT322 Track skid steer loader. This is a great running track skid steer that will be sure to please. The skid steer runs out very nicely. The engine on this skid steer starts right up idles down nice and low and has hesitation free power. The engine makes no odd noises, smoke, or blowby and has a ton of power. The machine has hand and foot controls, with auxiliary hydraulics on the right hand. The skid steer is a 2 speed and you just push the button on the top left handle. This machine does have auxiliary hydraulics and they have a flow rate of 19 GPM. This skid steer is strong running, free of leaks on the engine and the hydraulics don't have any seepage either. Buy this one and know that you will be well pleased as it looks and operates just as you would like it too. This is a job ready ... moremachine with strong hydraulics, the machine has an enclosed heated and air conditioned cab. The loader has a straight boom, good pins and bushings with little to no play in them and tons of power. It is a nice tight machine and all safeties work as they should. The machine has NO CREEP, and NO DRIFT. The hours on this machine are currently at 1802.3 but it is subject to change as I use it around the yard. The skid steer has brand new sprockets and Camoplast Solideal tracks. Operator station- The cab is in nice condition. The suspension seat is in good condition and is free of cracks. The cab glass does not have any cracks or gouges, the windows move freely, all gauges, engine warning lights, and controls are functional. The controls and functions for the boom, bucket and auxiliary hydraulics are very responsive and quick. All buttons and functions of this machine work as they should with no wiring or electrical issue. The heater and AC is fully functional, all buttons are in good shape with little wear. The interior is in overall very good shape. Engine& Hydraulics- The engine compartment is very clean and well maintained. The engine does not use or burn any oil. The engine
1996 BOBCAT 863 SKID STEER LOADER. BOBCAT 811 BACKHOE ATTACHMENT, FORKS AND BUCKET, SOFT CAB WITH FRONT SHIELD. Hours: 2251. GOOD WORKING SKID STEER POWERED BY A DEUTZ DIESEL ENGINE. NEW CUTTING EDGE ON FRONT BUCKET. NEWER TIRES WITH ABOUT 80 PERCENT TREAD. CLEAN UNIT WITH NEWER PAINT. 811 BACKHOE ATTACHMENT THAT IS INCLUDED HAS HYDRUALIC OUTRIGGERS AND DIGS ALMOST 11 FEET DEEP. The skid steer does come with all the attachments.More details and pics ask here: ursula.722(at)gmail(dot)com. Not bids!Contact Me!Best Price*$2.500 USD. DON'T USE E-BAY ASK SELLER- because I will not be able to give you a quick REPLY! For any questions regarding payment and shipping details please contact us via e-mail at: ursula.722(at)gmail"dot"com. Please contact us before you make any bid! Thank you!
INGERSOLL RAND BOBCAT 450 453 SKID STEER SERVICE MANUAL S/N 561711001. 561811001& ABOVE This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK ... morePICTURES AND DESCRIPTION BEFORE BUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
INGERSOLL RAND BOBCAT M970 974 975 SKID STEER SERVICE MANUAL This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK PICTURES AND DESCRIPTION BEFORE ... moreBUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
I have an original John Deere operator's manual for the 60 Skid-Steer loaders serial no. 120.001 and up- 89 pages of detailed pictures,specifications and information on the operation and care of Your John Deere skid loader- no loose or missing pages, Good clean tight book with very light wear- if you have any questions please ask- Take a look at my other manuals and books I will combine shipping- Thanks!
This auction is for one used Boss Model 65 Skid Steer Dozer Blade- V Blade Snow Plow Quick Attach. The V Blade Snow Plow has been only used a couple of times. The attachemnt is in good condition and works fine. The attachment has been stored indoors but does have some spotted superficial surface rust. The blade has 3 hydraulic cylinders and is approx 65" in Length when straight and approx 27" in height. Blade can be used in the Forward'V' Backward'V' Straight, Left Angled or Right Angled Positions. Blade also rotates approx 15% clock wise and approx 15% counter clock wise(As can be seen in pictures) Blade can be used in many different conbinations of above. Plow has 2 trip edge springs(If plow hits curb or large object the plow blade will tilt forward so as not to damage the object or the plow it self) Plow comes ... morewith adjustable skid shoes and electronic control module as seen in pictures. This is a heavy duty plow that can be used to Doze many different materials above and beyond snow plowing. I am the original owner and it has only been used to plow snow a couple of times. SHIPPING. This auction does NOT INCLUDE Shipping of Plow. Buyer is responsible for all shipping costs on this unit. We are not responsilbe for any damage that may arise from shipping. Plow will be leaving in working order. Plow is currently on a skid which we can banded to skid. We have a fork lift so we can help load this onto a truck. Buyer can pickup Plow from our location by appointment only.
INGERSOLL RAND BOBCAT 943 SKID STEER SERVICE MANUAL This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK PICTURES AND DESCRIPTION BEFORE BUYING THE ... moreITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
INGERSOLL RAND BOBCAT T250 TURBO/ HIGH FLOW SKID STEER SERVICE MANUAL S/N 523111001. 523011001& ABOVE This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD ... moreAS IS! CHECK PICTURES AND DESCRIPTION BEFORE BUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
Up for auction is 5 different Case Skid Steer brochures from 1990's. all in very good condition. Any questions please ask. Posted with
Up for auction is a USED Loegering steel/metal track installation tool. P/N YN601. S014. This will work with any Loegering steel track. READ BEFORE BIDDING* Buyer is responsible for all shipping cost unless otherwise noted in description. I will combine shipping on multiple items. All items must be paid in full within 48 hours. Unless other arrangements have been made. Import duties. Taxes and charges are not included in the item price or shipping charges. These are the buyers responsibility. Please check with your country's customs office before bidding/buying. I try to represent all items sold as accurately and honestly as I can. All items sold“AS IS“ With no warranty expressed or implied. Thanks for looking and good luck!
Ford Skid Steer Loader L554 Gas& L555 Diesel Radiator Shipping Info Description New Replacement Aftermarket Ford Radiator Core Size: 18.000" Wide. 17.812" High, 3 Rows of Tubes& 8 Fins Per Inch Fits the following models: Ford/ New Holland SKID STEER LOADER: L554(W/ GAS ENGINE) Ford/ New Holland SKID STEER LOADER: L555(W/ DIESEL ENGINE SN Radiator assembly. Height: 17-3/4" Width: 18" Depth: 2" Skidsteers: L554 w/gas engine, L555 w/gas engine; s/n to 712164. A-771716) We work with several warehouses for faster distribution. Some parts may be out of stock. You will be notified within 1 business if we are unable to fill your order. Or feel free to email to check stock before ordering. Please see our store for more parts. MN residents add 6.875% sales tax After winning the auction go to the payment information ... moresection on the auction page and follow the checkout process at the bottom. Failure to do this will delay your order. Shipping Info Buyer to pay shipping and handling of $35.00 if located in the the lower 48 US states. If shipping is required anywhere else other than the lower 48 US states please email for shipping information.
Bobcat Skid Steer Loader 645.743,743B,743DS Radiator Shipping Info Description New Aftermarket Replacement Bobcat Radiator Fits the following models: Bobcat SKID STEER LOADER: 645 Bobcat SKID STEER LOADER: 743(S/N 15001- Bobcat SKID STEER LOADER: 743B Bobcat SKID STEER LOADER: 743DS Radiator assembly. Height: 30-1/4" Width: 11-1/2" Depth: 2-3/4" 6 FPI. Skidsteers: 743B, 743DS all w/ Kubota diesel engines. Core Size: 11.750" Wide 30.000" High 4 Rows Of Tubes 7 Fins Per Inch(X-6648820/ A-6648820) We work with several warehouses for faster distribution. Some parts may be out of stock. You will be notified within 1 business if we are unable to fill your order. Or feel free to email to check stock before ordering. Please see our store for more parts. MN residents add 6.875% sales tax After winning the auction go to the ... morepayment information section on the auction page and follow the checkout process at the bottom. Failure to do this will delay your order. Shipping Info Buyer to pay shipping and handling of $35.00 if located in the the lower 48 US states. If shipping is required anywhere else other than the lower 48 US states please email for shipping information.
Bobcat Skid Steer Loader 843& 843B Radiator Shipping Info Description New Aftermarket Replacement Bobcat Radiator Fits the following models: Bobcat SKID STEER LOADER: 843& 843B Core Size: 11.750" Wide 30.25" High 5 Rows Of Tubes 7 Fins Per Inch(A-6448799) We work with several warehouses for faster distribution. Some parts may be out of stock. You will be notified within 1 business if we are unable to fill your order. Or feel free to email to check stock before ordering. Please see our store for more parts. MN residents add 6.875% sales tax After winning the auction go to the payment information section on the auction page and follow the checkout process at the bottom. Failure to do this will delay your order. Shipping Info Buyer to pay shipping and handling of $35.00 if located in the the lower 48 US states. If shipping ... moreis required anywhere else other than the lower 48 US states please email for shipping information.
INGERSOLL RAND BOBCAT 963 SKID STEER SERVICE MANUAL This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK PICTURES AND DESCRIPTION BEFORE BUYING THE ... moreITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
Bobcat 60″ Skid Steer Loader Pickup Broom Attachment Equipment Specifications Manufacturer BOBCAT, Model SWEEPER 60, Broom Length 60 inch Fits to Models 1023. 1074, 1075, 1075C, 1080, 1080B, 1080C, 1213, 2000, 201, 2400, 2410, 2643, 310, 313, 315, 325.5, 343, 352, 360, 363, 371, 433, 440, 440B, 443, 443B, 444, 450, 450 LP, 450C, 452, 453, 453B, 453C, 453D, 453F, 463, 463D, 463E, 463F, 473, 473B, 500, 520, 530, 532, 533, 535, 540, 542, 542B, 543, 543B, 543T, 553, 553C, 553F, 553H, 572, 573, 583H, 600, 610, 611, 620, 624B, 630, 631, 632, 640, 641, 642, 642B, 643, 643B, 645, 653, 673H, 684, 700, 720, 721, 722, 725, 725B, 730, 731, 732, 733, 736, 741, 741B, 742, 742 LP, 742B, 742G, 743, 743B, 743C, 743DS, 743G, 743M, 751, 751B, 751C, 751D, 751F, 751G, 753, 753A, 753B, 753C, 753D, 753E, 753F, 753G, 753H, 753HC, 753L, 757, 760, 761, 763, 763B, ... more763BC, 763C, 763DS, 763EH, 763F, 763G, 763H, 763HC, 763HF, 763HG, 763HP, 763P, 764, 765H, 773, 773B, 773C, 773D, 773E, 773EH, 773F, 773G, 773GT, 773H, 773HC, 773HF, 773HL, 773K, 773T, 773TH, 7753, 7753HL, 7773, 783, 825, 8252, 833, 843, 843B, 843C, 843H, 843HC, 843HF, 853, 853B, 853C, 853F, 853G, 853H, 853HC, 853HD, 853HF, 853HP, 863, 863B, 863C, 863F, 863G, 863GH, 863H, 863HC, 863HE, 863HF, 863P, 863PA, 864, 864EH, 864F, 864G, 864H, 864HF, 864HG, 864T, 873, 873C, 873F, 873G, 873H, 873HG, 883, 883G, 893, 9045, 907, 909, 942, 943, 943B, 943G, 943HL, 951, 953, 953C, 963, 963B, 963C, 963F, 963G, 970, 970B, 973, 974, 975, 975C, 980, 983, A220, A250, A300, FARMBOY, M200, M310, M325, M371, M400, M440, M444, M453, M500, M500D, M500E, M543, M553, M600, M600D, M600E, M610, M611, M620, M643, M700, M753, M763H, M773, M825, M853, M863, M863H, M970, MT50, MT52, MT52D, MT55, S100, S130, S130J, S130K, S150, S150K, S160, S160HF, S175, S175HF, S185, S185HF, S185K, S205, S220, S220H, S250, S250C, S250H, S250HF, S250K, S275, S300, S330, S330H, S630, S650, S70, S750, S753G, S770, S850, T110, T140, T140K, T180, T180H, T190, T190A, T190F, T190G, T190H, T190HA, T190HF, T190HT2, T190K, T200, T200A, T20
Up for Auction is this 2006 John Deere loader. it has a very nice repaint on the out side and some new decals. I purchased this machine last year it had a injector problem.But I had all 4 injectors/ pumps rebuilt& times in by my local Flint Equipment/ John Deere dealer also a new Turbo installed that had wear& was advised to change as not to have any further problems. I always used a Hydrolice clamp bucket on it to remove. Load logs& tree limbs. But this dirt bucket is what came with it& will be going with it. I also have a great pair of forks I will swap in place of the dirt bucket if new owner would rather forks this machine is in sound running condition no problems& used as a spare machine a few days a week and ready to work. It has a heat& maybe ac unit.not sure but the water supply is by passed So not hooked up ... moreor working never has& I never fooled with it to see why. I have the glass windows,roll up front door and all hardware to bolt every thing back on& some mounting bracket& very large weights that was all removed from the machine when I purchased it. All sold seperatly from the machine and this sale. local pick up@ no charge Shipping is@ new owners expense. I can and will make sure its loaded& secure. when it leave with your shipper. thanks good luck NO reserve.
Barley used Bobcat(Clarke) Skid Steer Muffler used on Ford 98ci(1600cc) gas engine.
2011 New Holland l225 skid steer. Machine is a two speed with cab and heat. Great visibility, 83hp turbo diesel. Machine is loaded with quick tach, cloth air ride seat, fm am radio, keyless start ect. Machine has 1725 hrs and is in like new condition. Machine does need tires but every thing else is in new condition. Price is $27,000.00.
I have an Original Shop Manual from 1989 for Gehl 6620 Series Skid Steer Loader. Covers Models SL6620 and SL6625. Covers Chassis Repair Only. The manual has the following Contents: Introduction. Specifications, Safety, Decals, Lubrication, Chassis, Drive, Hydrostatic System, Hydraulic System, Electrical System, and Engine(basic service only) The manual is 108 pages and in good condition. The manual may be a copy of the original. I will combine shipping for multiple items purchased. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1406e38f812-0xfa-
I have an Original Parts Manual from 1986 for Gehl 6620 Skid Steer Loader. The manual is 46 pages and in good/excellent condition. I will combine shipping for multiple items purchased.
I have an Original Operator's Manual from 1985 for Gehl 6620 Skid Steer Loader. The manual has the following Contents: Warranty. Introduction, Specifications, Check Lists, Safety, Controls and Safety Equipment, Operation, Adjustments, Lubrication, Optional Features and Accessories, Troubleshooting, Service, Decal Locations, Maintenance Log, Index, and Standard Hardware Torque Specifications. The manual is 56 pages and in good/excellent condition. I will combine shipping for multiple items purchased. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1406e38f8b7-0xfb-
Deere899 is in very good condition. Part#OMKV18668 Posted with
Deere903 is in very good condition. Part#OM-M75868 Posted with
Ingersoll Rand Bobcat Skid Steer Loader 751 Bics Original Shop Service Manual
Ingersoll Rand Bobcat Skid Steer 310 313 371 Original Shop Service Manual
Ingersoll Rand Bobcat Skid Steer 542B Original Shop Service Manual
2005 Caterpillar 277B Crawler Cat Skid Steer loader. Meter shows only 1580 hours, 82 horsepower cat diesel, block heater and glow plugs, Full factory cab with Heat and Air(air may need a charge) all glass is in excellent, very good seat, hydraulic power quick coupler so you can change the bucket without leaving the seat, good tracks, very good rollers and sprockets, comes with hard to find track adjustment tools, very good heavy duty smooth bucket with a good edge, this machine has no leaks, runs and operates great, strong drive motors and hydraulics, machine has a 2950 lbs lift capacity, unit has cat pilot hand controls, hand and foot throttle, came from a company with great service program, this is a very clean super nice hard to find machine, for sale locally and can be sold at any time, $1000 down payment through paypal within 24 hours, ... moreBank wire or cashiers check with in 5 days, buyer arranges all shipping I can load and I do have a dock available for shipping, machine sold as-is, where-is.
USED ONE SEASON ONLY. MUST SELL COMPANY IS CLOSING DOWN! YOU ARE BIDDING ON A 10' PUSH PLOW FOR ANY TYPE OF SKID STEER. RUBBER BLADES IS NOT WORN AND HAS A FEW SEASOBN ON IT FOR USE. Posted with
NEW HOLLAND SKID STEER MAKE NEW HOLLAND MODEL L170 SERIAL N6M430020 5114 HOURS 52HP YEAR 2006 60" BUCKET AUX HOOKUPS MACHINE IS IN GOOD WORKING CONDITION PLEASE CONTACT JOSH AT 540-320-8606 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE. DUE TO RECENT TRANSACTIONS WE NO LONGER ACCEPT PAYPAL, ALL PAYMENTS OVER $1500 MUST BE PAID VIA CASH, WIRE TRANSFER OR CASHIERS CHECK.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14073b763e9-0x106-
I have here a 2004 cat 257b turbo skid steer rubber track loader. It comes with a tooth bucket. The tracks and any bad rollers were just replaced to the tune of 6k$. This machine has full cab with heat and ac. It also has power quick coupler. The machine starts and runs as it should with no leaks or weld repairs on the machine. The bucket has some dings small cracks and welds. The lift arms also seem to be drifting down a bit. Is improving I think it is just from sitting. I have the glass for the front door a d it will be included in the auction and will need to be installed by the new owner. Also the meter in the machine is broken, so I had my local cat dealer verify machines hours with their dealer electronic technician program, please see the picture. A new hour meter will be installed for the new owner! This machine is ready to work, ... morethe tracks on the machine have less than 15 min run time. They are BRAND new OEM style. Not some cheap knock offs. I was recently a victim of an attempted extortion by a foreign eBay buyer. Because eBay only protects buyers and not the sellers that they profit from my feedback was negatively affected. Rest assured and bid or buy with confidence. I am a very knowledgeable and trust worthy seller and I always try to go the extra mile to make sure that buyers are 110% satisfied. I try to describe machines as best as I can and I will help in any way that I can just ask! Machine sold as is where is if you do not understand what as is where is please ask. pa buyers add 6% Machines picked up buy out of state buyers also must pay 6% unless exempt. If you ship this machine I do NOT have to charge you tax, so long as it leaves the state of Pennsylvania. Try u ship dot com for great shipping rates. I can load a full size tractor trailer, I will assist you any way I can. Any questions please ask! I describe these machines as best I can! Check my feedback. Machines must be paid for in full 5 days post auction and must be picked up 30 days post auction or they will be for fitted and resold,
THIS IS A NEW 20 PAGE CATALOG. SHIPPING INCLUDES A CARDBOARD STIFFENED BUBBLE WRAP ENVELOPE.
ASSET/EQUIPMENT: 2006 Bobcat S160 Skidsteer Loader S/N: 526716855 DESCRIPTION: Available for sale is a 2006 Bobcat S160 skid-steer loader. It is powered by a reliable Kubota V2003- M-DI-T direct-injected turbo-diesel engine making 56 HP. Machine currently shows 1665 hours on a working meter(hours may accrue as we use it around the yard) This machine has an operating weight of approx. 6250 lbs. and a rated operating load of 1600lbs. Has keyless start option and pattern control option. This machine was a one owner. Contractor owned machine. Nice sized machine- not too big, not too small. This skidsteer has a bucket breakout force of 3550 lbs. and an arm lifting force of 2900 lbs. It has a max dump height of approx. 9' 8"bucket hinge pin) and a max tipping load of 3301 lbs. Tires are in good shape. Has aux. hydraulics and hi-flow option. ... moreAll hydraulics operate as they should. And the machine travels as it should. Cab is in clean condition. Machine is ready to work. Forks are also available for this machine at an additional cost. Please call for a package deal. QUESTIONS/CONTACT: For more details/questions. Please contact me at any time: Rick Sanchez(214) 683-1550 SHIPPING: We can help arrange shipping and help load out. But shipping costs are the responsibility of the buyer. Please feel free to ask us for a quote- please email us the destination zip code. Included pertinent information such as"residential" or"commercial" address, loading dock" capable, forklift" available, etc. We can provide containerization services as well for an additional cost- please contact us to discuss. Dimensions for shipping purposes: Width: 66" Length: 130.3" Height: 76.3" Weight: approx. 6150 lbs OTHER: The machine is available for sale locally as well. And is subject to prior sale- please call to insure availability. The machine is a used machine. And as such is sold as-is, where-is. No warranties are expressed or implied. Hour meter readings are given as shown. It is located centra
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I am auctioning a 2006 JCB 1110T Robot track loader showing 1025 hours on the hour meter. The machine has pilot controls(JCB SERVO CONTROLS) and provisions for auxiliary hydraulic equipment using a foot control. It is powered by a Perkins 92 HP 4 cylinder turbo diesel engine. The loader comes with a 82 5/8" bucket(almost 7' The unit is estimated to weigh just over 10.000 lbs. All measurements and weights associated with this machine are estimated. I have never had the machine weighed and I measured the machine with a tape measure for the purposes of shipping. I took this loader in on a trade with intentions to use it for the summer but I have decided that the project is beyond my ability. ... moreI do not know much about the machine and I do not have experience with heavy equipment to honestly comment on the cosmetic and mechanical condition of the machine. What I do know is that it starts and runs good. There are no warning lights on inside the cab. The machine tracks straight and the hydraulic pumps do not whine or make noise. The engine sounds good and runs very smooth. The tracks appear to be recently replaced. I did have a mechanic inspect the loader and he said that all fluids are clean and up to the correct operating levels. All filters have been recently changed. I currently have the machine stored indoors and there is a small drip of(what I believe to be) hydraulic oil on the concrete floor. This took about a month to show up. I did use the machine to move a pile of dirt in my yard that has been there for years. The stockpile was compacted and vegetated and hard as a rock. This machine moved that pile with very little effort at all. Please view a short video of the machine in operation on YouTube at https:www.youtube.com/watch?v=QdOVJtYe69s&feature=youtu.be and develop your own opinion of the condition of this loader. All sales are final. I do not provid
This backhoe is about the biggest that is mounted to a skidsteer. It has a 14' reach out from the skidsteer. It comes with 3 buckets. 12" 18" and 24" The backhoe is also all setup for a thumb or other accessory. It has the auxiliary foot controlled valve and all plumbing to the hydraulic quick connects near the bucket. It has the flip over outrigger pads for asphalt and for dirt. Also has the Wain-Roy style quick connector and CP buckets for fast switching between buckets. Local pickup is preferred but we can arrange for delivery for a fee if needed. Payment is due within 7 days. A $500 deposit through PayPal is required if you click buy it now. The remainder must be paid by cash in person or a cleared certified check before pick-up or shipping.
Mustang 310 skid steer loader with bucket and forks. Quick attach. New tires. Front and rear work lights. Nice original condition. Call or email with questions 320-237-8398.
Bobcat LT 213 Trencher used once to trench a 500ft ditch.Will dig 4ft
1970ish Bobcat Melroe skid steer tractor. Runs and everything works. Has been sitting for a while so it will need a new battery. It has a five foot bucket. Engine does drip a little oil and it does have the typical wear and tear you would expect on a vehicle this age. And it is very handy to have around. Sold as is please ask any questions before bidding! THE TRAILER IS NOT INCLUDED. PICK UP ONLY WILL NOT SHIP. Located in Salt Lake City,Utah.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14076a1885d-0xff-
MUSTANG 2040 SKID STEER OPERATOR. PARTS, SERVICE MANUALS(3 MANUALS) Picture is our default logo. If you want the picture of the manual. Please let me know. The manual is dirty but still useable. Check our ebay store for more inventories. If you paid too much with shipping i will surely refund it. We combine shipping. WE COLLECT 6% SALES TAX FROM KENTUCKY RESIDENCE. Call me if you have question at 270-849-2270& CELL# 270-403-8827 look for Grace.
Just taken in trade from a Recycling Center in Center FL. We are offering this S250 AS-IS Wholesale for $12.000 High hour Bobcat S250 with solid tires. Note bucket shown is NOT included but we will install a decent 80" used bucket with the loader We can also swap out the tires to Pnuematic Wheels& Tires. Call or email for a quote This loader was being used up until last week. Missing all the glass,has AC but it is NOT working Specs: Lift capacity 2500 lbs Dump clearance 8' 3" Weight 8400 lbs 81HP Kubota Diesel Engine Fuel Tank 23 Gallons Tipping Load 6111 Lbs Pump Flow for attachments 20.7 GPM Pump Pressure 3300 lb PSI Length with bucket 11.9" Width over tires 6' 2" Height to top of the cab 6' 7" Turning Radius 84" Seller: Jim Goodall Equipment Sales. 16327 Old US 41, Ft Myers, FL USA 33912. Family ... moreowned& operated by the Goodall Family. Office 239-254-4425 Jim Goodall 239-776-5725. Terms of sale. We request a $1000 deposit to hold the unit, balance with a bank check of wire transfer only. Sorry we do not accept credit cards for full payment. We do not ship COD. Subject to FL sales tax if shipped in FL. No sales tax if shipped out of state. Jim Goodall Equipment Sales. In business since 2006, We have over 40 years in the Equipment Industry.We have a retail store& 10,000 sq ft shop in Ft Myers, FL 33912. Our average sales are $3.5M and we maintain an average inventory of.5M. We are rated by D& B, and the BBB. We rely on repeat customers and provide personal service Any questions call Jim Goodall 239-776-5725.
Thomas T133 S Series Skid Steer Loader Shop Service Repair Manual
Thomas T243 HDS/ T245 HDS Series Skid Steer Loader Shop Service Repair Manual
Thomas T173 HLS II S Series Skid Steer Loader Shop Service Repair Manual
Thomas T243 HD S Series Skid-Steer Loader Shop Parts Manual
New Holland L785 Skid steer with bucket& Bradco 609 backhoe attachment Approx 1990 machine with later model backhoe.has some age but low hours. Machines runs and operates great. Strong Ford diesel and good hydros. 12X16.5 tires with good tread. HD 72" bucket. This is an older machine with normal wear& tear. Heavy duty machine with lots of power and lift capacity. Backhoe operates smooth and has lots of digging power. Local pick up is fine or I can arrange trucking if needed. If within several hundred miles freight cost is $2.50 per loaded mile. If long distance the mileage charge is less.if you want a shipping quote please email zip code You're welcome to come inspect. Run and operate this machine if you like. Skid steer runs and operates fine but is used equipment and sold as listed, as is condition PLEASE DON'T BID ... moreON THIS ITEM IF YOU'RE NOT SERIOUS ABOUT PURCHASING! Thanks! PA residents add 6% sales tax or if for business or farm use that is exempt need to sign a tax exemption form. Out of state buyers also need to pay tax if items are picked up in state(unless exempt) But not required to pay tax if item shipped outside of PA Narvon is located is southeastern PA(between Harrisburg& Philadelphia) Thanks for your interest. God bless!
I have here a 2004 bobcat t300. Gold package skid steer loader. Comes with choice of flat bucket or tooth bucket no forks. Machine has heat ac bobtach keyless start. Very nice machine no leaks no weld repairs etc, sprockets and rollers are in good shape will need tracks in the future. Original paint and decals in really nice shape. I was recently a victim of an attempted extortion by a foreign eBay buyer. Because eBay only protects buyers and not the sellers that they profit from my feedback was negatively affected. Rest assured and bid or buy with confidence. I am a very knowledgeable and trust worthy seller and I always try to go the extra mile to make sure that buyers are 110% satisfied. I try to describe machines as best as I can and I will help in any way that I can just ask! Machine sold as is where is if you do not understand what ... moreas is where is please ask. pa buyers add 6% Machines picked up buy out of state buyers also must pay 6% unless exempt. If you ship this machine I do NOT have to charge you tax, so long as it leaves the state of Pennsylvania. Try u ship dot com for great shipping rates. I can load a full size tractor trailer, I will assist you any way I can. Any questions please ask! I describe these machines as best I can! Check my feedback. Machines must be paid for in full 5 days post auction and must be picked up 30 days post auction or they will be for fitted and resold, no refunds will be given, if you need additional time to make payment please discuss with me first. Pay pal buyers will be responsible for all Paypal fees that I incur. You must have 100% of the funds available for purchase to bid or buy. Winning the item does not mean you have won the opportunity to negotiate a price or obtain financing. It means you agree to pay that price. Posted with
Pleaseread complete disclosure before you bid/buy or make an offer! Description Takeuchi TL 140 Tracked Skid Steer. This machines have good tracks. Machine came from a local construction company and seem to be job ready. Machine has a few scratches but overall in good shape. Please check out Takeuchi for detailed specs on this machine. NoReserve Auction When we list an item NO RESERVE this item is a trade in or an item that we aregoing to sell AS IS. ASIS means that we will tell you what we know about the item but we areselling it AS IS. Thismeans we will not stand behind the item at all. ItemsListed For Sale or Make Offer We do the best we can to list items to best of ourknowledge but we can not guarantee all info we provide is accurate. We includeserial number in every listing and it is the buyer’s responsibility to assurespecs and years ... moreof manufactures are correct. Because of Dead Beat ebayer’s we now require speaking to bidderspersonally by telephone before any offer will be accepted. We feelthat there are less chances of problems and misunderstandings if we speak tothe bidders and buyers before they commit to buy. What YourBuying We are selling used equipment. You should expectscratches. Dings, Dents, Faded Paint, ETC. If you are looking for perfect newequipment you need to go see the new dealer. As stated before we sell good usedequipment at wholesale prices. We will always try to explain any flaws in theequipment but we recommend everyone call and ask specific questions aseveryone’s opinion of used equipment is different. About Us We are a small family business that strives toprovide good used equipment at a fair price. As a small business we lookforward to meeting you and help you find the equipment that best fits yourneeds. Also as a small business we also strive to make your purchase as easyand professional as possible. Payment $500.00 Non Refundable deposit isrequired within 48 hours of end of the auction to our PayPal accountmarkkurtz43@yahoo.comor you may call into the office and we can run a cred
16’ CROSS COUNTRY TRAILER FOR SKID STEER$ 1800.00
This listing is for one Used Remanufactured M-600 M-610 Bob Cat Skid Steer AXLE For 600 610 With NO Front Brakes. If you have model with front brakes axle will only fit rear of your machine. Axle was removed from running machine and has been welded due to grooving will need to be machined to instal but will fit stock bearing and seal after. This axle is custom made from bobcat now NOT in stocking parts warehouse and well over $700.00! After machining you could be into this one for under $250.00!
front door for bobcat skid steers with rectangle headlights 500 series 600 series 700 series 800 series 900 series old style square cab rectangle head lights left hand hinge left hinged when sitting in bobcat comes with wiper untested door lock not tested glass in very good condition retails for over $1900! sold as is shipping available UPS ground if needed estimated $85 east coat $100 mid $125 west approx 60 lbs. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14079fa261a-0xfa-
INGERSOLL RAND BOBCAT 773 TURBO SKID STEER SERVICE MANUAL S/N 500K 11001& ABOVE This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK PICTURES ... moreAND DESCRIPTION BEFORE BUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
ASV PT100. 2008 MODEL YEAR. LOW LOW LOW HOURS. HYDRAULIC BUCKET REMOVAL. HYDRAULIC QUICK TACH. REAL HIGH FLOW MACHINE. CALL 1- 855- QUIKBID OR 304 279 9744 WITH ANY QUESTIONS UNIT IS FOR SALE LOCALLY WE FINANCE WE SHIP WORLDWIDE WE SHIP TO AUSTRALIA EVERY WEEK THIS ONE SELLS NO RESERVE TO HIGHEST BIDDER PILOT CONTROLS LOW LOW 1090 HOURS 3800 LB WORKING CAPACITY 7600 LB TIPPING LOAD HEAT/AIR ENCLOSED CAB ENCLOSED CAB FORESTRY PACKAGE NEW BUCKET LOOK AT THE TRACKS ON THIS BABY PILOT CONTROLS EXTREMLT POWERFUL MACHINE GREAT MACHINE TO RUN MULCHING HEADS CHECK OUT THE TRACKS! auxiliary hydraulics GP BUCKET LOW HOURS READING 1090 HOURS LOADER IS FOR SALE LOACLLY PLEASE CALL 1-304-279-9744 WITH AN Y QUESTIONS CALL 1- 855- QUIKBID OR 304 279 9744 WITH ANY QUESTIONS UNIT IS FOR SALE LOCALLY Dimensions. A. Length w/ Bucket, 12.3 ft in, 3760 mm, B. ... moreWidth Over Tracks, 5.8 ft in, 1753 mm, C. Height to Top of Cab, 6.6 ft in, 2023 mm, E. Ground Clearance, 14 in, 356 mm, F. Length w/o Bucket, 9.8 ft in, 2985 mm, Undercarriage. D. Length of Track on Ground, 6 ft in, 1842 mm, Engine, Make, Perkins, Model, 1104C-44LT, Gross Power, 99.5 hp, 74 kw, Peak Torque, 304 lb ft, 412 Nm, Displacement, 268 cu in, 4.4 L, Aspiration, Turbocharged, Operational, Operating Weight, 10150 lb, 4604 kg, Fuel Capacity, 26 gal, 98 L, Cooling System Fluid Capacity, 3.1 gal, 12 L, Engine Oil Capacity, 2.2 gal, 8.3 L, Hydraulic System Fluid Capacity, 20 gal, 76 L, Max Speed- low range, 6 mph, 9.7 km/h, Max Speed- high range, 11.5 mph, 18.5 km/h, Undercarriage, Ground Contact Area, 2610 in2, 1.7 m2, Ground Pressure, 3.8 psi, 26.7 kPa, Number of Track Rollers per Side, 21, Length of Track on Ground, 6 ft in, 1842 mm, Width of Track, 18 in, 457 mm, Loader, Operating Load, 3800 lb, 1724 kg, Tipping Load, 7600 lb, 3447 kg, Hydraulic, Pump Flow, 38 gal/min, 144 L/min, Relief Valve Pressure, 3300 psi, 22737 kPa, Dimensions, Width Over Tracks, 5.8 ft in, 1753 mm, Length w/ Bucket, 12.3 ft in, 3760 mm, Length w/o Bucket, 9.8 ft in, 2985 mm, Height to Top of
Description 2011 Caterpillar 252B3 Skid Steer Loader with EROPS. This Skid Steer is Like New. Came from a Cat dealer in a package of 10 of these. All are very low houred and in excellent shape, they are priced to sell! Quick Attach. Two Speed, EROPS, Aux Hydraulics, 300 Hours, Pilot Controls, Heat, 12-16.5NHS Tires, Very Nice, Like New! Serial#TNK00792 Stock#74604 Contact our office at 717-428-0922 with questions. You can reach Zach Thoman at 717-818-8078 or Kevin Frisby at 717-683-6684 for more information. WHAT YOU ARE BUYING In the majority of our auctions you are buying used farm and/ or construction equipment. We purchase our equipment from used equipment sources. If there is factory warra nty or any additional information that we know of, we will tell you. You should always keep that in mind when you are bidding on items. If you buy ... morea $3,000 item from one of our auctions, you should expect it to perform like a $3,000 item and not a $40,000 item. We are not trying to cheat anyone, and we describe all equipment to the best of our abilities. We are not experts with each piece of equipment we sell but we explain it to the best of our abilities and we are more than willing to attempt to answer any questions you may have. We are now Land Pride, Husqvarna, Rhino-Servis, J.S.Woodhouse, and, Ansung Rotary Tiller Dealers. New items not in stock typically take about one week for delivery to our store. We can not make any quarantees as to availability and prices are subject to change. Call McGrew Equipment at 888-311-2811 to inquire. MACHINE SPECIFICATIONS All information we provide for items such as Serial Numbers. Weights, Horsepower, Lift Capacities, etc, is taken from sources generally deemed to be accurate. We do not guarantee that information but provide it for your assistance. We may tell you that a machine is supposed to lift 5,000 pounds, but if it only lifts 3,000 pounds it is not our fault and we did not guarantee that. Likewise, if we tell you we believe a machine to be a 1999 model and it is really a 1
Description JCB 1105 Series III Skid Steer Loader with OROPS OROPS. 2268 Hrs. Quick Attach, Aux Hydraulics, 12-16.5NHS Tires Stock#74597 Contact our office at 717-428-0922 with questions. You can reach Zach Thoman at 717-818-8078 or Kevin Frisby at 717-683-6684 for more information. WHAT YOU ARE BUYING In the majority of our auctions you are buying used farm and/ or construction equipment. We purchase our equipment from used equipment sources. If there is factory warra nty or any additional information that we know of, we will tell you. You should always keep that in mind when you are bidding on items. If you buy a $3,000 item from one of our auctions, you should expect it to perform like a $3,000 item and not a $40,000 item. We are not trying to cheat anyone, and we describe all equipment to the best of our abilities. We are not experts ... morewith each piece of equipment we sell but we explain it to the best of our abilities and we are more than willing to attempt to answer any questions you may have. We are now Land Pride, Husqvarna, Rhino-Servis, J.S.Woodhouse, and, Ansung Rotary Tiller Dealers. New items not in stock typically take about one week for delivery to our store. We can not make any quarantees as to availability and prices are subject to change. Call McGrew Equipment at 888-311-2811 to inquire. MACHINE SPECIFICATIONS All information we provide for items such as Serial Numbers. Weights, Horsepower, Lift Capacities, etc, is taken from sources generally deemed to be accurate. We do not guarantee that information but provide it for your assistance. We may tell you that a machine is supposed to lift 5,000 pounds, but if it only lifts 3,000 pounds it is not our fault and we did not guarantee that. Likewise, if we tell you we believe a machine to be a 1999 model and it is really a 1996 model, we have not guaranteed the year and it is not our fault. If these things are that important to you that they will influence your decision to purchase, you should call the manufacturer yourself or do your own research bef
Description 2008 New Holland L180 Skid Steer Loader with OROPS. Runs good. Late model skid steer! OROPS. Quick Attach, Aux Hydraulics, 3565 Hours, 12-16.5NHS Tires Serial#N8M489569 Stock#74400 Contact our office at 717-428-0922 with questions. You can reach Zach Thoman at 717-818-8078 or Kevin Frisby at 717-683-6684 for more information. WHAT YOU ARE BUYING In the majority of our auctions you are buying used farm and/ or construction equipment. We purchase our equipment from used equipment sources. If there is factory warra nty or any additional information that we know of, we will tell you. You should always keep that in mind when you are bidding on items. If you buy a $3,000 item from one of our auctions, you should expect it to perform like a $3,000 item and not a $40,000 item. We are not trying to cheat anyone, and we describe all equipment ... moreto the best of our abilities. We are not experts with each piece of equipment we sell but we explain it to the best of our abilities and we are more than willing to attempt to answer any questions you may have. We are now Land Pride, Husqvarna, Rhino-Servis, J.S.Woodhouse, and, Ansung Rotary Tiller Dealers. New items not in stock typically take about one week for delivery to our store. We can not make any quarantees as to availability and prices are subject to change. Call McGrew Equipment at 888-311-2811 to inquire. MACHINE SPECIFICATIONS All information we provide for items such as Serial Numbers. Weights, Horsepower, Lift Capacities, etc, is taken from sources generally deemed to be accurate. We do not guarantee that information but provide it for your assistance. We may tell you that a machine is supposed to lift 5,000 pounds, but if it only lifts 3,000 pounds it is not our fault and we did not guarantee that. Likewise, if we tell you we believe a machine to be a 1999 model and it is really a 1996 model, we have not guaranteed the year and it is not our fault. If these things are that important to you that they will influence your decision to purchase, you should c
Make:Melroe Model:Angle Broom Serial No.690100315 Shipment: We can help customer with shipment. Normal 0 false false false EN-US X-NONE X-NONE Goldstar Equipment Supply Corp. Goldstarequipment.com. Address: 10 Windsor Ct. Mineola, NY. 11501. Tel: 516.741.1000.
Please read complete disclosure before you bid/buy or make an offer! Description Bobcat 72" Sweeper Attachment.We checked machine out before we listed it. This sweeper will fit any small to large frame skid steers with standard quick attach and runs off standard Aux hydraulics. Backhoe cost is over $7000 New. Don't miss out! No Reserve Auction When we list an item NO RESERVE this item is a trade in or an item that we are going to sell AS IS. AS IS means that we will tell you what we know about the item but we are selling it AS IS. This means we will not stand behind the item at all. Items Listed For Sale or Make Offer We do the best we can to list items to best of our knowledge but we can not guarantee all info we provide is accurate. We include serial number in every listing and it is the buyer’s responsibility to assure specs and ... moreyears of manufactures are correct. Because of Dead Beat ebayer’s we now require speaking to bidders personally by telephone before any offer will be accepted. We feel that there are less chances of problems and misunderstandings if we speak to the bidders and buyers before they commit to buy. What Your Buying We are selling used equipment. You should expect scratches. Dings, Dents, Faded Paint, ETC. If you are looking for perfect new equipment you need to go see the new dealer. As stated before we sell good used equipment at wholesale prices. We will always try to explain any flaws in the equipment but we recommend everyone call and ask specific questions as everyone’s opinion of used equipment is different. About Us We are a small family business that strives to provide good used equipment at a fair price. As a small business we look forward to meeting you and help you find the equipment that best fits your needs. Also as a small business we also strive to make your purchase as easy and professional as possible. Payment $500.00 Non Refundable deposit is required within 48 hours of end of the auction to our PayPal accountmarkkurtz43@yahoo.com or you may call into the office an
Used 96" angle blade attachment for skid steer or tractor. Heavy Duty blade with edge. shoes& side markers for snow plowing. Also works as a dozer blade. 24" high. As you can see in pic 7 there's some play in the hole where the cylinder pin pushes against.could use a bushing there but also works fine as it is. For sale as shown/as is Will work on skid steers with standard universal quick attach plate. Including Bobcat, Case, Gehl, John Deere, Mustang, New Holland, Thomas, Scat Trak and more. Available with standard flat face coupling or the pioneer style as shown in pic 24. You're welcome to pick up or I can send via truck freight. Please use shipping calculator to get a rate quote. PLEASE DON'T BID ON THIS ITEM IF YOU'RE NOT SERIOUS ABOUT PURCHASING! Thanks! PA residents add 6% sales tax or if for business or ... morefarm use that is exempt need to sign a tax exemption form. Out of state buyers also need to pay tax if items are picked up in state(unless exempt) But not required to pay tax if item shipped outside of PA Narvon is located is southeastern PA(between Harrisburg& Philadelphia) Thanks for your interest. God bless!
Used 60" root grapple for skid steer or tractor. This is a heavy duty industrial type grapple. Unit is in good condition and appears to have been used very little since new. Has 48" opening. Will work on skid steers with standard universal quick attach plate. Including Bobcat, Case, Gehl, John Deere, Mustang, New Holland, Thomas, Scat Trak and more. Available with standard flat face coupling or the pioneer style as shown in pic 2 manufacturers link is shown below http:www.quickattach.com/shop-by-department/skid-steers/grapples/products/quick-claw/60-industrial-grapple-rake/ 24. You're welcome to pick up or I can send via truck freight. Please use shipping calculator to get a rate quote. PLEASE DON'T BID ON THIS ITEM IF YOU'RE NOT SERIOUS ABOUT PURCHASING! Thanks! PA residents add 6% sales tax or if for business or farm ... moreuse that is exempt need to sign a tax exemption form. Out of state buyers also need to pay tax if items are picked up in state(unless exempt) But not required to pay tax if item shipped outside of PA Narvon is located is southeastern PA(between Harrisburg& Philadelphia) Thanks for your interest. God bless!
Description This no reserve auction is for a 2003 Trak King 30 Skid Steer Loader with OROPS. 7 Hours Showing. 50 Horsepower, Hand Controls, Quick Attach Bucket, Auxiliary Hydraulics, 28x8.50-15 Tires, Serial#FD300015, Stock#74596. This skid steer is in very good shape, hardly looks like it has ever been used, runs and operates good, click on the video link below to watch this machine in action! http:www.youtube.com/watch?v=9IABnS5Nyxw For more information contact Kevin Frisby at 717-428-0922 or 717-683-6684 WHAT YOU ARE BUYING In the majority of our auctions you are buying used farm and/ or construction equipment. We purchase our equipment from used equipment sources. If there is factory warranty or any additional information that we know of, we will tell you. You should always keep that in mind when you are bidding on items. If you buy a ... more$3,000 item from one of our auctions, you should expect it to perform like a $3,000 item and not a $40,000 item. We are not trying to cheat anyone, and we describe all equipment to the best of our abilities. We are not experts with each piece of equipment we sell but we explain it to the best of our abilities and we are more than willing to attempt to answer any questions you may have. We are now Land Pride, Husqvarna, Rhino-Servis, J.S.Woodhouse, and, Ansung Rotary Tiller Dealers. New items not in stock typically take about one week for delivery to our store. We can not make any quarantees as to availability and prices are subject to change. Call McGrew Equipment at 888-311-2811 to inquire. MACHINE SPECIFICATIONS All information we provide for items such as Serial Numbers. Weights, Horsepower, Lift Capacities, etc, is taken from sources generally deemed to be accurate. We do not guarantee that information but provide it for your assistance. We may tell you that a machine is supposed to lift 5,000 pounds, but if it only lifts 3,000 pounds it is not our fault and we did not guarantee that. Likewise, if we tell you we believe a machine to be a 1999 model and it is really a 19
This auction is for a Loegering 72" Eliminator Rake Attachment For A Skid Steer Loader. This unit is in GOOD CONDITION! This unit is NOT CRACKED OR WELDED AT ALL! Loegering 72" Eliminator Rake Attachment For A Skid Steer Loader Precision Placement Allows You To Push Soil Within Inches Of Edges Perfect Along Driveways Walks And Curbs Grading Teeth Create The Perfect Final Grade Great For Removing Scrub And Small Vegetation Works Well In Small Tight Areas Normally Requiring Hours Of Manual Labor Has The Pockets For Scarfires None Included In Sale Will Work Forward And Reverse Teeth Are In Good Conditon A Few Have Some Sall Bends Nothing Major Standard Two Pin Skid Steer Quick Attach ATTACHMENT IS READY TO WORK! Please see all pictures. Please ask any questions you may have we will be glad to help. This unit NEW IS OVER $2.100.00 We ... morecan ship no problem! Please just email or call for a freight quote 24/7. We Give a 5 Star Service on Ebay and are ready to help in any way. If you have any questions please ask I Will be glad to help Just Email or Call(814)658-3066 Thanks Nick Payment: For payment we will take the following: $250.00 Paypal depoist due with in 24 hours of the auction close. Remainder due with in 5 business days. Shipping Costs: We DO NOT mark up any shipping prices. What it costs me it will cost you. There is no pallet fee. No loading fee and no banding fee. We get a 70% discount with our freight broker on LTL shipments and we pass that along to you. We make no money on shipping! Please understand diesel fuel is almost $5.00 a gallon. We are glad to help in any way with customer pickups also. Please when letting feedback on the DSR remember We are Providing a 5 Star Service and Would Like a Five Star DSR Rating In Return. Please if you have any questions call us we are glad to help(814)658-3066 Thanks Nick. PA Sales Tax: Please Read! PA Residents are subject to 6% PA SALES TAX! Unless you provide a PA Tax Exemption form for Resale or Farm Use. If you are from out of state and you have
2006 Cat Caterpillar 287B Track Skid Steer Machine Loader Cab.Heat Tractor. Actual video of the item: No video available. Please call to discuss payment arrangements. 2006 Cat Caterpillar 287B Track Skid Steer Machine Loader Cab.Heat Tractor. This machine has 2028 hours on the meter. Year: 2006 Engine starts up on this machine and runs out very well. Hydraulic power is great! Equipped with the XPS hiflow. Full cab with like new door. Air condition needs to be gone over. It does not blow cold air. Tracks are in good shape. New aluminum rollers on right side. Rollers on left are in good shape. 4/1 bucket is in fair shape. We have a hiflow stump grinder available. Mechanically this machine is ready to go to work! Have a live video chat via skype. My skype ID is: Seth.j.fenby. We can help you arrange freight. We deal with several different trucking ... morecompanies and can get very competitive rates. If you would like a quick shipping rate please email. Text or call me with your zip code! We accept many different payment methods. Contact us for further information! Video demonstrations of equipment available at www. youtube. com/QUequipment05 We have several finance companies that we deal with. If you are interested. Contact us for a credit application! If you are interested. Feel free to send a third party out to inspect the equipment you are intrested in purchasing. Go to www. wegolook. com. They have a good reputation and will get you all the information you want at a very reasonable rate! Call or text Seth anytime at(814)487-8310. Thank you for viewing our equipment and have a great day! This item is being sold as is where is with no warranty or guarantee expressed or implied. Click the"facebook" logo above! Add me as a friend and keep up with my personal activities, contact info and join the QUE SALES INC fan page to get company updates! SMS or MMS my cell at anytime: 814-487-8310. View the about me page. Shipping Email zip for a rate. Need to talk? Call 814-487-8310! anytime. Email through"ebay ask a se
2008 Cat Caterpillar 279C Track Skid Steer Loader Cab.Heat, hyd quick attach. Actual video of the item: No video available. Please call to discuss payment arrangements. 2008 Cat Caterpillar 279C Track Skid Steer Loader Cab.Heat, hyd quick attach. This machine has 3138 hours on the meter. Year: 2008 A. LENGTH W/ BUCKET 12.1 ft in 3679 mm B. WIDTH OVER TRACKS 6.5 ft in 1981 mm C. HEIGHT TO TOP OF CAB 6.9 ft in 2117 mm E. GROUND CLEARANCE 9.1 in 231 mm F. LENGTH W/O BUCKET 9.7 ft in 2960 mm G. CLEARANCE AT MAX LIFT AND DUMP 8 ft in 2427 mm H. REACH AT MAX LIFT AND DUMP 1.9 ft in 594 mm Undercarriage D. LENGTH OF TRACK ON GROUND 5.8 ft in 1767 mm Specification Engine MAKE Caterpillar MODEL C3.4 DIT GROSS POWER 84 hp 62.6 kw NET POWER 82 hp 61.1 kw POWER MEASURED@ 2500 rpm DISPLACEMENT 201 cu in 3.3 L NUMBER OF CYLINDERS 4 ASPIRATION Turbocharged ... moreOperational OPERATING WEIGHT 9892 lb 4486.9 kg FUEL CAPACITY 25.9 gal 98 L COOLING SYSTEM FLUID CAPACITY 3.7 gal 14 L ENGINE OIL CAPACITY 2.6 gal 10 L HYDRAULIC SYSTEM FLUID CAPACITY 15.1 gal 57 L OPERATING VOLTAGE 12 V ALTERNATOR SUPPLIED AMPERAGE 90 amps MAX SPEED- LOW RANGE 5 mph 8.1 km/h MAX SPEED- HIGH RANGE 8.5 mph 13.6 km/h Undercarriage GROUND CONTACT AREA 2504 in2 1.6 m2 GROUND PRESSURE 4 psi 27.6 kPa LENGTH OF TRACK ON GROUND 5.8 ft in 1767 mm Loader OPERATING LOAD 3200 lb 1451.5 kg TIPPING LOAD 6483 lb 2940.6 kg BREAKOUT FORCE 7308 lb 3314.9 kg BUCKET CAPACITY 0.52 yd3 0.4 m3 Hydraulic PUMP FLOW 22.2 gal/min 84 L/min RELIEF VALVE PRESSURE 3335 psi 22994 kPa Dimensions WIDTH OVER TRACKS 6.5 ft in 1981 mm LENGTH W/ BUCKET 12.1 ft in 3679 mm LENGTH W/O BUCKET 9.7 ft in 2960 mm HEIGHT TO TOP OF CAB 6.9 ft in 2117 mm GROUND CLEARANCE 9.1 in 231 mm CLEARANCE AT MAX LIFT AND DUMP 8 ft in 2427 mm REACH AT MAX LIFT AND DUMP 1.9 ft in 594 mm TURNING RADIUS FROM CENTER- MACHINE REAR 64.6 in 1640 mm TURNING RADIUS FROM CENTER- INC BUCKET 91.1 in 2314 mm Have a live video chat via skype. My skype ID is: Seth.j.fenby. We can help you arrange freight. We deal with several
SKU: 916408 A: 00130000002zo0b O: 0065000000IPruz PA: View Photo Gallery. Calculate Shipping. Location: Sacramento. CA 95826 Item Description. This is a no reserve auction for a Toro Dingo 22805 Planetary Auger Head in good operating condition. This former rental machine has been regularly maintained. Serviced and inspected throughout its life. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for ... moreUS and International shipping- for estimates click the Freight Quote Box below. Overview: Make: Toro Dingo Model: 22805 Serial Number: 270000147 Transport Weight: approx. 227 lbs Transport Dimensions: 48" L x 40" W x 19" H Features/ Specifications: 57rpm@ 11gpm 2 9/16" Shaft Single pivot Horizontal lockout High Torque drive Planetary gear drive Resources: For more information on this unit including full specifications. View the manufacturer’s brochure(pdf) Condition: Last known to be in good working condition Unit is in good overall cosmetic condition Hoses.Fittings and mount plate are in good condition- see photos See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes onl
PRESS ARROW TO PLAY VIDEO GHEL 6640 SKID STEER LOADER CALL ED NOW 304-279-9744 WHAT A BEAST 86 HORSE POWER ALMOST 2400 LB LIFT CAPACITY MACHINE IS CLEAN AND TIGHT IN EVERY WAY" THE BADDEST SKIDSTEER I EVER OPERATED" ITS GOT IT ALL AND THEM SOME THIS IS AN" EXTREME" MACHINE EXTREME LIFTING POWER WE SHIP TO AUSTRALIA EVERY WEEK VERY CLEAN WELL MAINTAINED MACHINE CHECK OUT THE IMPRESSIVE SPECS CALL 304-279-9744 NOW THIS ONE SELLS ABSOLUTE WITH NO RESERVE DO NOT MISS THIS ONCE IN A LIFETIME OPPORTUNITY SAVE THOUSANDS OFF DEALER PRICE UNIT IS ALSO ADVERTISED FOR SALE LOCALLY CALL 1- 855- QUIKBID OR 304 279 9744 WITH ANY QUESTIONS UNIT IS FOR SALE LOCALLY COMPARE THESE ONLINE AT OVER 40000 DOLLARS THIS ONE SELLS NO RESERVE TO HIGHEST BIDDER CHECK OUT THE VIDEOS! CALL NOW 304-279-9744 ANYTIME WE EXPORT WORLDWIDE CALL 1- 855- ... moreQUIKBID OR 304 279 9744 WITH ANY QUESTIONS UNIT IS FOR SALE LOCALLY auxiliary hydraulics COMPARE THESE ONLI NE AT OVER 40000 DOLLARS CALL 1- 855- QUIKBID OR 304 279 9744 WITH ANY QUESTIONS UNIT IS FOR SALE LOCALLY Dimensions. A. Length with Bucket, 11.8 ft in, 3594 mm, B. Width Over Tires, 6 ft in, 1841 mm, C. Height to Top of Cab, 6.8 ft in, 2082 mm, D. Wheelbase, 4 ft in, 1219 mm, E. Ground Clearance, 9.1 in, 231 mm, F. Length w/o Bucket, 8.4 ft in, 2565 mm, G. Clearance at Max Lift and Dump, 7.9 ft in, 2408 mm, H. Reach at Max Lift and Dump, 34 in, 863 mm, Engine, Make, Deutz, Model, BF4M2011, Net Power, 82 hp, 61.1 kw, Power Measured@ 2500 rpm, Displacement, 190 cu in, 3.1 L, Operational, Operational Weight, 7800 lb, 3538 kg, Fuel Capacity, 24 gal, 91 L, Hydraulic System Fluid Capacity, 15.9 gal, 60 L, Max Speed, 8.4 mph, 13.5 km/h, Tire Size, 14.00x17.5 HD, Operating Voltage, 12 V, Alternator Supplied Amperage, 95 amps, Loader, Operating Load Rating, 2400 lb, 1088.6 kg, Tipping Load, 4800 lb, 2177.2 kg, Hydraulic, Pump Flow Capacity, 23 gal/min, 87.1 L/min, Dimensions, Length with Bucket, 11.8 ft in, 3594 mm, Length w/o Bucket, 8.4 ft in, 2565 mm, Width Over Tires, 6 ft in,
SKU: SB212099 A: 0015000000ewTlv O: 0065000000O2FHQ PA: 0015000000VvVTW or View Photo Gallery. Request Freight Estimate. View Financing Options. Equipment Appraisal. Location: Crosby. TX 77532 Item Description. This is a no reserve auction for a 2008 Bobcat T190 Tracked Skid Steer Loader in good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This low-hour former rental machine features auxiliary hydraulics and a large 62” general purpose bucket. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet ... morevehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Freight Quote Box below. Overview: Make: Bobcat Model: T190 Year: 2008 Hours: 2.119 shown on working meter Serial Number: 531621201 Operating Load: 1.900 lbs Net Horsepower: 65 Operating Weight: approx. 8.612 lbs Transport Dimensions: 138"L x 68"W x 76"H Feat ures: Auxiliary hydraulics 62" general purpose bucket Rubber tracks Backup Alarm OROPS Specifications: Engine Make: Kubota Model: V2403 Horsepower: 65 Fuel: Diesel Performance Bucket Pin Height@ Max Lift: 7'6" Reach@ Max Lift: 2'6" Rated Operating Capacity: 1.900 lbs Tipping Load: 7.283 lbs Length of tracks on ground: 55.2" Loader Hydraulic Flow: 16.9 gpm Travel Speed: 7.3 mph Track Width: 12.5" Loader Control Type: Foot Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Inspection Report: Overvie
Used 247B with 2856 hours Serial Number MTL02542 Call for information 615.744.7846
SKU: 905959 A: 00130000002zo0b O: 0065000000NJhsT PA: or View Photo Gallery. Request Freight Estimate. View Financing Options. Equipment Appraisal. Location: Kent. WA 98032 Item Description. You are bidding on a 1992 Bobcat Skid Steer Loader in fair operating condition. This Skidsteer features a 60" general purpose bucket. Auxiliary hydraulics, and a Kubota 4 cylinder diesel engine. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. ... moreContainerizing and port-access available for US and International shipping- for estimates click the Freight Quote Box below. Overview: Make: Bobcat Model: 743B Year: 1992 Hours: 2.074 on meter Serial Number: 509316338 Operating Load: 1.300 lbs Net Horsepower: 36 Operating Weight: approx. 5.000 lbs Transport Dimensions: 126"L x 62"W x 76"H Features: Auxiliary hydraulics Pneumatic tires OROPS Work lights 60" bucket Specifications: Engine Make: Kubota Horsepower: 36 Fuel: Diesel Performance Bucket Pin Height@ Max Lift: 109" Reach@ Max Lift: 23.8" Rated Operating Capacity: 1.300 lbs Tipping load: 2.600 lbs Wheelbase: 34" Tire Size: 10-16.5 Ground Clearance: 10" Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Inspection Report: Overview Comments Overall Appearance Good for age Overall Operating Condition Fair- see engine notes below Engine Starter Operational Exhaust System Operational Cooling System Operational Fuel System Operational Oil Leaks Some residue noted around engine. No major leaks Fan/ Belts Average Comments Engine will start after several long glow plug cycles and using
2006 John Deere 320 including Standard Fork and Bucket Description Model: 320 Hours: 1.445 Year: 2006 Fuel: Diesel, S/N: T00320A120990, Type: Rubber Tired Drive: Hyrdostatic with 3rd Value& ROPS, Comes With: Standard Fork or Bucket As Optional Attachment, Optional Bradco 8609X Hydraulic Attachment(Please Call 516-741-1000 For More Information On This Item) Make: Bradco Model: 8609X S/N: 23557, Fits: 18669, Price: $4.900, Contact Information: Name: Goldstar Equipment Supply Corp Sales Phone: 516.741.1000 Billing Phone: 516.741.2600 Shipping Phone: 516.741.1300 Address: 10 Windsor Court. Mineola, NY 11501 E-Mail: goldstarequipmentsupply@gmail.com Fax: 516.741.2700 Shipping: Item available for pickup. We can also assist customer with finding shipping arrangements. Taxes and Fees: In state buyers will be charged state and local taxes and ... moreany other required New York State fees. Warranty: This merchandise is being sold as is. With no warranty, expressed, written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. It is the responsibility of the buyer to have thoroughly inspected the merchandise, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the merchandise. Goldstar Equipment Supply Corp www.goldstarequipment.com Address: 10 Windsor Ct. Mineola NY 11501 Tel: 516.741.1000
2004 John Deere 260 Skid Steer Loader Description Make: John Deere Model: 260 Year: 2004 S/N: T00260A93611, Hours: 1.370, Capacity: 2300 lbs. Speed: 2, Comes With: Bucket or Forks. Extra Set of Wheels, and Rims, Contact Information: Name: Goldstar Equipment Supply Corp Sales Phone: 516.741.1000 Billing Phone: 516.741.2600 Shipping Phone: 516.741.1300 Address: 10 Windsor Court. Mineola, NY 11501 E-Mail: goldstarequipmentsupply@gmail.com Fax: 516.741.2700 Shipping: Item is available for pickup. We can also assist customer with finding shipping arrangements. Taxes and Fees: In state buyers will be charged state and local taxes and any other required New York State fees. Warranty: This item is being sold as is. With no warranty, expressed, written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, ... moreor defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle. Goldstar Equipment Supply Corp www.goldstarequipment.com Address: 10 Windsor Ct. Mineola NY 11501 Tel: 516.741.1000
You are looking at a very nice running Gehl 4625 skid steer loader. The Kubota diesel starts right up. Idles nice and low, and has hesitation free power. The engine on the skid steer is free of any leaks and does not smoke, burn oil, or make any odd noises. The hydraulics are free of leaks and operate nice and smooth just as you would like them too. The driving and hydraulic operations of this machine are all hand controls, except the auxiliary hydraulics which are run by your foot. The hoses are in good condition and the axle seals and bearings are in good condition. This machine runs and operates flawlessly. The only known issues are cosmetic, it has been touched up over the years and could use a little paint on the front bottom of the cab if you were really worried about it. The bucket is included in the auction, and it does have a worn ... morefront cutting edge. Buy this machine and know that you are getting a work ready machine that runs out nice and smooth and has no known issues. The tires and rims were just replaced as well as the seat. Gehl 4625SX Highlights Kubota Diesel Engine 47 HP Auxiliary Hydraulics 3400 Hours New Seat New Tires& Rims 1350 Lb operating capacity 2700 LB tipping capacity OROPS(open roll over protection structure) Lights all work See my feedback and know that everything I sell I go through very carefully so that my customers have the best experience possible. Please feel free to call me at 715-615-1886 with any questions that you may have. I guarantee freight at $1.65 per loaded mile or less if I set up the freight with one of my brokers. You can get an exact price by calling with your zip code and if you have a commercial dock to unload at or not. I am trying for the first time a freightquote.com quote system on this page and I do not know how it works. I would prefer to do the freight myself but you can if you would like. I have a loading dock at my location in Marshfield WI 54449. If you would like to view the skid steer in person give me a call at 715-615-1886 and I will give you dir
You are bidding on a John Deere 325 328 Skid Steer Loader Operator's Manual. Publication# OMT205051. Book is around 156 pages. Like new condition. This version is on 8 1/2" x 11" paper with cover binding. This manual should be read to learn how to operate and service your machine correctly. Section Index: Safety Signs. Controls, Operating, Replacement Parts, Service Machine Safely, Service Interval Chart, Service- Lubrication, Service- Engine, Service- Transmission and Hydraulics, Service- Final Drive, Service- Steering Brakes and Pedals, Service- Electrical, Service- Miscellaneous, Troubleshooting, Storing Vehicle, Specifications, Warranty Information A really good tool for anyone buying a machine or operating and maintaining a 325 or 328 Skid Steer Loader. If you aren't sure that this is your machine please call. Other ... moremanuals for this machine are also available. Call us to set up a listing. Payment via PAYPAL is preferred. Payment must be made within 7 days of end of auction. Thanks for bidding. Toll Free 866-507-2787 or 205-849-5555 Quality Earthmoving Equipment Parts: New. Used and Rebuilt ¨ Caterpillar ¨ Case ¨ Komatsu ¨ John Deere ¨ Fiat ¨ Dresser ¨ Bobcat ¨ Volvo ¨ Samsung ¨ Terex ¨ Hitachi ¨ Clark ¨ Linkbelt ¨ Kobelco ¨ Hough ¨ Michigan ¨ International ¨ Allis Chalmers ¨ Ford/New Holland ¨ Engines ¨ Overhaul Kits ¨ Cylinder Heads ¨ Blocks ¨ Transmissions ¨ ¨ Crankshafts ¨ Torque Converters ¨ Turbochargers ¨ Final Drives ¨ ¨ Gears ¨ Hydraulic Pumps ¨ Mufflers ¨ Manifolds/Elbows ¨ ¨ Control Valves ¨ Differentials ¨ Clutch Disks ¨ Brakes ¨ Radiators ¨ ¨ Axles ¨ Blades ¨ Buckets ¨ Teeth ¨ Boom/Stick Assemblies ¨ ¨ Cabs ¨ Sweeps ¨ Cylinders ¨ Dirt Guards ¨ Rippers ¨ Teeth ¨ ¨ Under Carriage ¨ Recoil Springs ¨ Ro
Used twice! 2011 Quality Trailer Pro Series-Custom steel sides. Painted to match-10.000lb capacity-superb shape serious interest only 734.604.2528cell. Call or text NOTE: ITEM IS FOR SALE LOCALLY. SELLER RESERVES THE RIGHT TO SELL LOCALLY
Condition: Used, Make: Gehl, Model: CTL80, Model Year: 2005, Hours: 1950, Net Horsepower(HP) 97, Operating Load: Over 2.700 lbs, Operating Weight: Over 9.000 lbs, Type: Track, 2005 GEHL CTL80 SKID STEER EROPS- Heat/AC Components. Auxiliary Hydraulics. Pilot Controls. 2 Speed Travel. Good Tracks. 97 HP Yanmar 4TNV106T Engine. Over 7.000 LBS Tipping Load. Original. 1950 Hours. COMPARABLE TO THE TAKEUCHI TL150! Here is an excellent deal on a used condition 2005 Gehl CTL80 Skid Steer. The Gehl CTL80 is comparable to the ever popular Takeuchi TL150! This 2005 Gehl CTL80 features EROPS with Heat and A/C components. Auxiliary Hydraulics, Pilot Controls, 2 Speed Travel, Good Tracks, 97 HP Yanmar 4TNV106T Engine, 7,000+ LBS Tipping Load, and only 1950 Hours! This 2005 Gehl CTL80 came in on trade, and was originally a Heat/AC machine. We have the door, ... moreand most of the glass is entact. Give us a call with any questions or concerns that you may have about purchasing equipment on-line. Check out the HD Video below of this 2005 Gehl CTL80 Skid Steer in action. Click on thumbnails below to see large photo Adam R. 817) 980-2813, Will S. 817) 673-2113, email: LSR.ENTERPRISE@yahoo.com, All payments must be received in full and confirmed by an LSR Enterprise representative before any equipment is to be picked up or delivered to the buyer. LSR Enterprise will only accept payment through the following methods: Cash. Wire Transfer, or Certified Funds. LSR Enterprise will only accept Credit Cards and Pay-Pal payments for deposit purposes. Deposits are only required to hold or reserve equipment and will not be refunded. All purchases are to be paid in full within 10 business days of completing the transaction. By law all purchases are"TAX EXEMPT" unless you are a resident of the State of Texas and do not apply for"Sales Tax Exemption" or"Agricultural Exemption" LSR Enterprise has successfully and affordably shipped equipment to 4 of the 7 continents and almost everywhere in between. This is a direct reflect
2006 ASV RC50 Compact Track Skid Steer Loader Low Hours! Auxiliary Hydraulic Plumbing. Electrical Connection at Auxiliary Hydraulic Ports. Perkins HP70518N Engine. 14" Track Belts. Manual Coupler. 62" Wide General Purpose Smooth Edge Bucket. Diesel Fuel. Fully Functional and Ready to Do Work! Please call Jim at 920-362-7220 with any questions! SHIPPING: Shipping and any associated fees or permits are buyer's responsibility. CPR Services' standard business hours are M-F. 7AM-4PM CST. Easy truck access and loading dock. If required. Preview and Pickup Location is 1260 W Main Ave. De Pere, WI 54115 Upon Request. CPR will combine winning auctions to consolidate shipping. Check out my other items! Please confirm coordination of all shipments at least 24 hours prior to pickup. Please do not hesitate to contact us at 920-336-4444 ... moreor click"Ask Seller a Question" with any questions or concerns. PAYMENT: Wisconsin Sales Tax May Apply Depending on Pickup/Shipment Specifics. Please Inquire. Item(s) MUST BE PAID IN FULL within 5 business days of auction close. For this Item CPR will only accept the following payment methods: Bank ACH Transfer Bank Wire Transfer Bank/Certified Cashiers Check Item sold"AS IS" WHERE IS" and"WITH ALL FAULTS" CPR SERVICES SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
ASV RC30 Compact Track Skid Steer Loader Low Hours! Transportation: L-118 x W-47 x H-72 Estimated: 6200 lbs Fully Functional and Ready to Do Work! Please call Jim at 920-362-7220 with any questions! SHIPPING: Shipping and any associated fees or permits are buyer's responsibility. CPR Services' standard business hours are M-F. 7AM-4PM CST. Easy truck access and loading dock. If required. Preview and Pickup Location is 1260 W Main Ave. De Pere, WI 54115 Upon Request. CPR will combine winning auctions to consolidate shipping. Check out my other items! Please confirm coordination of all shipments at least 24 hours prior to pickup. Please do not hesitate to contact us at 920-336-4444 or click"Ask Seller a Question" with any questions or concerns. PAYMENT: Wisconsin Sales Tax May Apply Depending on Pickup/Shipment Specifics. Please ... moreInquire. Item(s) MUST BE PAID IN FULL within 5 business days of auction close. For this Item CPR will only accept the following payment methods: Bank ACH Transfer Bank Wire Transfer Bank/Certified Cashiers Check Item sold"AS IS" WHERE IS" and"WITH ALL FAULTS" CPR SERVICES SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140890bed04-0x104-
New Holland 60" and 72" Hydraulic Driven Snowblower Attachment for skid-steer loaders Operators Manual More Photos upon request
Operator's Manual for Case 1840 Uni-Loader Skid Steer Loader. Manual No. Rac 9-25051. 142 pages. Issued January. 1995. Like new condition. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-140891412b6-0x105-
NEW HOLLAND L185 LOW HOUR DIESEL SUPER BOOM NEW CUT EDGE ON BUCKET INSTALLED NO SMOKE RUNS GOOD HAND DRIVE CONTROLS FOOT BUCKET AND BOOM CONTROLS 2006 MODEL YEAR IF YOU ARE LOCAL FEEL FREE TO RENT THIS MACHINE BEFORE YOU BUY IT WE ARE LOCATED 1 HOUR SOUTH OF ROCKFORD. 2 HOURS WEST OF CHICAGO,2 HOURS EAST OF THE QUAD CITIES,1 HOUR NORTH OF BLOOMINGTON. SHIPPING AVAILABLE IF YOU HAVE ANY QUESTIONS PLEASE CALL GREG@ 815-910-7813. IF YOU NEED A SHIPPING QUOTE PLEASE CALL OR EMAIL WITH YOUR ZIP CODE AND WE WILL TAKE IT FROM THERE. ALL ITEMS PICKED UP AT OUR LOCATION ARE SUBJECT TO ILLINOIS SALES TAX 6.50% UNLESS THE ITEM IS BEING SHIPPED OUT OF STATE BY A THIRD PARTY. IF YOU INTEND ON USING PAYPAL PLEASE ADD 2.9% IF YOU ARE LOOKING TO PURCHASE SOMETHING ELSE WE HAVE OTHER BOOMS AND SCISSORS INSTOCK. THANKS FOR LOOKING AT OUR ITEMS.
INGERSOLL RAND BOBCAT 863/ HIGH FLOW SKID STEER SERVICE MANUAL S/N 514411001 TO 514424999. 514511001 TO 514524999, 514611001 TO 514624999 This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL ... moreOR CALL AT 270-849-2270. SOLD AS IS! CHECK PICTURES AND DESCRIPTION BEFORE BUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
This is an ORIGINAL New Holland L565. Lx565, and Lx665 Skid Steer Loader Tractor Service Parts Catalog Manual. This manual has super illustrations as well as having in-depth parts identification information for these hard working New Holland skid steers. This manual is about an inch thick and contains 300+ pages. I will also throw in a nice binder. Â This manual is in FINE+ overall condition. FREE S& H. Thanks for viewing.Triple KÂ
This is an ORIGINAL New Holland L-553 and L-555 Skid-Steer Loader Tractor Service Parts Catalog Manual(1992 printing AND no longer available from NH) This manual has super illustrations as well as having in-depth parts identification information for these hard working New Holland skid-steers. This manual contains 320+ pages that are clean and in nice shape. This manual comes in a new binder and is in FINE overall condition. FREE S& H. Thanks for viewing.Triple KÂ.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-14089a12f4b-0xf9-
INGERSOLL RAND BOBCAT 453 SKID STEER LOADER SERVICE MANUAL S/N 515011001. 515111001& ABOVE This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK ... morePICTURES AND DESCRIPTION BEFORE BUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.
INGERSOLL RAND BOBCAT 751 SKID STEER SERVICE MANUAL S/N 515730001. 515620001& ABOVE This manual is dirty but still in good condition. Check our ebay store for more inventories! WE HAVE COLLECTION OF DIFFERENT MANUALS NOT YET LISTED. TELL US WHAT YOU NEED AND WILL TRY TO FIND IT FOR YOU! WE COLLECT 6% SALES TAX FROM KENTUCKY& MARYLAND RESIDENCE. NOTE: PLEASE CHECK THE PICTURES AND DESCRIPTION BEFORE BUYING OUR ITEM. WHAT'S IN THE PICTURE IS WHAT YOU ARE GETTING. IF THERE IS A DISCREPANCY BETWEEN THE PICTURES AND THE DESCRIPTION, PLEASE DON'T HESITATE TO E-MAIL ME SO I CAN CHECK AND CLARIFY THE ISSUE. I WILL NOT GUARANTEE THAT ALL MY ITEMS ARE COMPLETE! WHAT YOU SEE IS WHAT YOU ARE GETTING! IF YOU WANT ME TO CHECK THE MANUALS BEFORE YOU BUY IT PLEASE DON'T HESITATE TO EMAIL OR CALL AT 270-849-2270. SOLD AS IS! CHECK PICTURES ... moreAND DESCRIPTION BEFORE BUYING THE ITEM. ANY DISCREPANCY OR QUESTION PLEASE EMAIL TO CLARIFY.