|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: India Table Dia. Can be used in both horizontal & vertical position. Table Slots:4. Table Height : 2-1/16" (52mm).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Structural specifications: Product model: HT03RA100 Itinerary : 360° Table size: Φ100mm Transmission mode: worm gear (reduction ratio 1/180) Guide rail: ... morebearing Material: Aluminum-black anodized Weight: 1.7kg Resolution / Pulse: 0.01 ° (no subdivision) 0.0005° (20 subdivisions) Design resolution: 0.01°, non-MS drive; 0.0005° = 1.8", 20MS drive Rotation speed (maximum): 25° / sec Repeatability: 0.005° = 18" Absolute on-axis accuracy: 0.01° = 36" Top board beat: 15μm Recoil: 0.005° = 18" Eccentricity: 10μm Lost movement: 0.005° = 18" Parallelization: 80μm Load: 45kg Packing size: 23*13*16cm Gross weight: 2kg Package Included: 1X HT03RA100 rotating platform.
Buy It Now
Free Shipping Condition: New Location: India 100 mm Chuck & Backplate A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Hor/vert ... moreRotary Table 4". Table height 66 mm in flat position Table graduated 360 degrees in 5 degree divisions 4 Slots.
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India
Buy It Now
$296.70 Shipping Condition: Used Location: Yorktown, United States Actual item pictured. Mfg by Walter and imported from western Germany by Dapra.
Buy It Now
Condition: Used Location: Belmont, United States 3/4" x 60 White nylon disc.
Buy It Now
$70.00 Shipping Condition: New Location: China 1 set Double support 5th rotary axis A+C Axis ( type number: RTM17-A50-C50). The fifth axis (C axis) reduction ratio: 50: 1 ( Nema23 waterproof two phase ... more4-wire 3A stepper motor). The fourth axis (A axis) reduction ratio: 50: 1 (Nema23 waterproof two phase 4-wire 3A stepper motor).
Buy It Now
Condition: Used Location: Emporium, United States Graham 34" hydraulic index table. When this was pulled from service, it worked perfectly. This has been sitting for a number of years but appears to be ... morein descent condition. This has been kept indoors.
Buy It Now
$158.00 Shipping Condition: New Location: China Vertical center 1027 height 85.5mm. Turbine worm: speed ratio 1:72.
Buy It Now
Free Shipping Condition: New – Open box Location: Kansas City, United States
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Worktable graduated 360 degrees. 6" Rotary Table 3 Slot. will stand horizontal and vertical. height 80mm (when horizontal). Vertical Centre height 100mm. ... moreone rotation is 4 degrees.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States Grizzly G9296 Adj. Tailstock For 8-Inch and 10-Inch Rotary Tables This Adjustable Tailstock provides the support you need for longer workpieces. Approximate ... moreweight: 40.2 lbs. Product Features: Size MT#2 taper Package dimensions: 11.8" x 13.4" x 9.1" Approximate weight: 40.2 lbs Dimensions(in) 9.10 X 13.39 X 11.50  _ nbsp. nbsp Important Information: We offer discounted rates for bulk purchases. Please inquire. We combine shipping. Please note that certain items cannot be combined. In case you don&rsquot see the shipping rate displayed. Please feel free to contact us for a shipping quote. International Shipping: Oslash if you need a super fast international shipping please contact usØ We do combine shipping. The more you buy the lower the shipping cost. nbspØ  International shipping may be subject to a longer handling time. nbspØ  Estimated time in transit  is still just an estimate. In some cases items are subject to an extended time in transit due to custom delays, extended inspections in your country or lack of efficiency of the postal service. nbspØ  USPS Standard mail or Priority mail are not guaranteed to be trackable. The service which is guaranteed to be trackable is USPS EXPRESS mail. Oslash  Most items are shipped with USPS. However. If you prefer a different shipping method, please notify us prior to purchase. nbspØ  We cannot be responsible for time in transit. Custom fees or for custom delays. nbspØ  All international items are insured. nbsp . Thank you for Looking! You may be interested in on eBay. nbsp
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Structural specifications: Product model: HT03RA100 Itinerary : 360° Table size: Φ100mm Transmission mode: worm gear (reduction ratio 1/180) Guide rail: ... morebearing Material: Aluminum-black anodized Weight: 1.7kg Resolution / Pulse: 0.01 ° (no subdivision) 0.0005° (20 subdivisions) Design resolution: 0.01°, non-MS drive; 0.0005° = 1.8", 20MS drive Rotation speed (maximum): 25° / sec Repeatability: 0.005° = 18" Absolute on-axis accuracy: 0.01° = 36" Top board beat: 15μm Recoil: 0.005° = 18" Eccentricity: 10μm Lost movement: 0.005° = 18" Parallelization: 80μm Load: 45kg Packing size: 23*13*16cm Gross weight: 2kg Package Included: 1X HT03RA100 rotating platform.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Yes, we do. You may need to sign in. 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. ... moreWhat should I do if the item quality is bad / does not fit ?.
Buy It Now
Free Shipping Condition: New Location: India ROTARY TABLE 4" 100MM 4 SLOT TILTING. Rotary Table Horizontal & Vertical 4" / 100 mm Tilting with. Rotary Table Horizontal & Vertical 4" / 100 mm. 65 ... moremm Lathe Chuck & Back Plate for Milling Machine. Hand Wheel can be set to Zero.
Buy It Now
Free Shipping Condition: New Location: India ROUND VISE 4"(100mm) SPECIFICATION. Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: 13/16" (20.5mm). Rotary Tables Tilting 4″ (100 mm). Round ... moreVise Jaw Opening: 1-9/16" (40mm). Round Vise Height: 1-1/4" (33mm).
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this Rotary Axis has the capabilities to help you get the job done right. 1 x Rotary Axis.
Buy It Now
Free Shipping Condition: New Location: India Rotary table tiltable horizontally & vertically 4" / 100 mm. ROUND TABLE 4" 100MM 4 SLOT TILT. Rotary table horizontal and vertical 4" / 100 mm. 65 mm ... morelathe chuck & back plate for milling machine. Handwheel can be set to zero.
Buy It Now
$28.18 Shipping Condition: Used Location: Cincinnati, United States Approximate Weight 18 LBS. Approximate Height 8". Frequency 50/60 Hz.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States D260 Small Stretch Film Baler Special Rotary Table Special turntable for. The upper plate is made of 304 stainless steel,and the circle around of the ... moredisk is the lower arc.Effectively avoid the stretch film winding to the chassis.
Buy It Now
$15.00 Shipping Condition: New Location: United States Center Height: 65mm. Top tip: Activity type. Stretch distance: 50mm.
Buy It Now
$10.40 Shipping Condition: New Location: Schaumburg, United States Conveyor Capacitor as Compared to Haas® 93-2018. All our parts have been tested for fit and are functional on Haas Machining Centers®. Parts in Motion ... moreis not affiliated with Haas Automation®. THIS IS MOST LIKELY THE PROBLEM!
Buy It Now
Condition: Used Location: Brookpark, United States We can provide freight quotes. 2 PART FIXTURES.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this Rotary Axis has the capabilities to help you get the job done right. 1 x Rotary Axis. Your ... morekind consideration is highly appreciated.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States A great combo of Tilting Rotary table (3"in 75mm & 4"in 100mm) with 4 jaws self centering chuck ( 50 & 65mm) with back plates & T-nuts. 4 Jaws Self Centering ... moreChuck M14 x 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
Buy It Now
Condition: Used Location: Rochester, United States Type: Rotary Table. Table Size: 18" x 18". This table is exactly as pictured.
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions.
Buy It Now
Condition: Used Location: Conroe, United States aims WOW! HAAS 5C QUAD-SPINDLE 4TH-AXIS SERVO INDEXER- HA5C4 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO ... more4:30 PM PST Made in the U.S.A. by Haas Automation Inc. of Oxnard. CA. This is a 5C Quad-Spindle 4th-Axis Servo Indexer in GREAT condition. Model# HA5C4 Serial#s: 500414. 500415, 500416, 500417 The HAAS HA5C4 Indexer Retails for over $24.500.00 without the Pneumatic Collet Closers! Haas obtains the most cost-effective multi-spindle designs on the market by spacing heads as close together as possible. In higher volume applications. Loading multiple parts saves tool changing and rapid-movement times, allowing your machine to run longer between part loadings adding up to substantially increased profits. Features: Pneumatic Collet Closers. Greater power and torque. Faster acceleration/deceleration. Superior reliability. Threaded spindle nose for chucks. Heavy Duty Design. Specifications: Spindle: Number: 4 Maximum Speed: 0.001 to 200 deg/sec Maximum Torque: 25 ft-lb Nose Thread: 2-3/16- 10 tpi Runout Max: 0.0004" Backlash: 50 arc-sec Center Height: 5.875 +/ 0.002" Gear Ratio: 60:1 Standard 5C Collet Size Range: 1/64 to 1-1/16" Indexing: Maximum Rotation/Step: 999.999 deg Resolution: 0.001 deg Accuracy +/1: 60 arc-sec Repeatability: 10 arc-sec Worm Gear Diameter: 2.8" General: Plug: 17-Pin Air Pressure Maximum: 120 PSI Operating Temp(Max Ambient) 100 deg F Duty Cycle(w/o tailstock) 75% full speed Overall Dimensions: 31" x 8" x 13" tall. Comes as shown in pictures. To go to the HAAS Automation website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WOW! HAAS 5C QUAD-SPINDLE 4TH-AXIS SERVO INDEXER- HA5C4 WOW! HAAS 5C QUAD-SPINDLE 4TH-AXIS SERVO INDEXER- HA5C4 WOW! HAAS 5C QUAD-SPINDLE 4TH-AXIS SERVO INDE
Buy It Now
Free Shipping Condition: New Location: India 65mm 4 Jaw Self centering Lathe chuck. Backplate is drilled and counterboared to fit a range of 3" and 4" rotary tables with 3 Slots or a 4 Slots. Table ... moreDia.: 3-1/8" (80 mm).
Buy It Now
Free Shipping Condition: New Location: Rohini Sector-7 S.O, India Vice Jaw Width:2-7/16" (62mm). Vice Jaw Depth:3/4" (19mm). Vice Jaw Opening:1-5/8" (27mm). Fits our3" (80mm) & 4" (100mm) Rotary Tables perfectly. The ... moremoving jaw has V-grooves to hold Round objects.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Rotary Axis. CO2 Machines. CO2 Accessories. Other CO2 Accessories. WHY LIMIT YOUR PRODUCTION CAPABILITIES?. Engravings on round objects are always in ... morehigh demand. SIMPLE INSTALLATION: Just connect the cable of the rotary axis with the cable port on the engraver machine.
Buy It Now
Free Shipping Condition: New Location: China Model: Z023. 1 Dividend Plate. The indexing plate is a machine tool accessory that holds the workpiece on the chuck or between two pinnacles and rotates, ... moreindexing and positioning it. This indexing plate has 36/40/48 holes.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 65mm MT2 Tail-Stock Rotary Axis Live Center Fit CNC A 4th Axis Router Tailstock.
Buy It Now
$24.00 Shipping Condition: Used Location: Bayonne, United States 8” IndexingRotary T-Slotted Table Wheel;. (2434) All photos are of the actual product(s) you will receive and are intended to help describe the quality ... moreand condition of the piece(s). Rotates 360-Degrees Clockwise and Counterclockwise.
Buy It Now
$52.68 Shipping Condition: New Location: El Paso, United States 36.0000 x16.0000 x16.0000.
Buy It Now
$41.38 Shipping Condition: New Location: Ontario, United States For use with rotary table model DP-3 FOR HV(RT)- 10,12,14,16. DIVIDING PLATEDP-3. Number of the holes of Dividing Plates. DP set include index plate. ... morecrank handle, 3 screws, sector, & U Washer.
Buy It Now
Free Shipping Condition: New Location: Jagadhri S.O, India 4" Horizontal And Vertical Precision Rotary Table With Clamping kit Premium Quality. 4" Rotary Table With Clamping kit:-. 06 pcs clamping kit included. ... more4 rotary table with clamping kit design. 4 rotary table with clamping kit drawing.
Buy It Now
Free Shipping Condition: New Location: India Rotary Table 4" Tilting Hor/vert Rotary Table 4" Tilting. Table height 66 mm in flat position Table graduated 360 degrees in 5 degree divisions. OVERALL ... moreHEIGHT INCLUDING JAWS 65MM MAX SPEED 3500 THIS CHUCK IS FRONT MOUNT WHICH MAKES FITTING A BACK PLATE MORE STRAIGHT FORWARD A QUALITY CHUCK SUPPILED WITH FIXING BACKPLATE FOR ROTARY TABLE & T-NUTS SET.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Suitable for all our tapping machines. Cast iron material, good stability, high precision wear resistance, not easy to deformation, not easy to rust; ... moreThe cast iron plate adopts the scraping process to make the whole plane smooth and not scratch; Using manual scraping, the surface push the table seat workpiece is more smooth, no astringent feeling.
Buy It Now
Free Shipping Condition: New – Open box Location: United States
Buy It Now
$11.00 Shipping Condition: New Location: Zakhira S.O, India An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis. -Milling ... more:Milling curved profiles and angled faces relative to a centre line.
Buy It Now
Condition: Used Location: Houston, United States Really nice rare table. functions as it should.
Buy It Now
$400.00 Shipping Condition: Used Location: Edison, United States Inspected/Service by HAAS/Allendale Machinery on 3-9-23.
Buy It Now
$29.75 Shipping Condition: New – Open box Location: Schaumburg, United States All our parts have been tested for fit and are functional on Haas Machining Centers ®. Parts in Motion is not affiliated with Haas Automation ®.
Buy It Now
$24.75 Shipping Condition: New – Open box Location: Schaumburg, United States New Take Off - 10 Pocket Carousel Motor with Proximity Sensor as Compared to Haas® PN# 93-30-1679A / 93-1696 for MM TM GR Series Machines. All our parts ... morehave been tested for fit and are functional on Haas Machining Centers ®.
Buy It Now
$8.75 Shipping Condition: Used Location: El Paso, United States 11.0000 x4.0000 x4.0000.
Buy It Now
$8.95 Shipping Condition: Used Location: Jasper, United States Hardinge Model HV-4, 5C Collet Indexing Head Spindle Nut Lock OEM #HV-141-B and Lock Screw OEM #HV-124. Good used condition with good threads & knurl. ... moreParts will function as designed.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Center height: 65MM. Top:Use Mo-type 2 Top. Your satis faction is our ultimate goal. Topuse Mo-type 2 top. Feature 1Easy installation,Convenient Use,Easy ... moreOperation. Feature Creative Design，Durable Material，Beautiful Appearance.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States 65mm MT2 Tail-Stock Rotary Axis Live Center Fit CNC A 4th Axis Router Tailstock.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 65mm MT2 Tail-Stock Rotary Axis Live Center Fit CNC A 4th Axis Router Tailstock.
Buy It Now
Free Shipping Condition: Used Location: Odessa, United States Thank you for visiting Wazobia Enterprise. We sell both new and used items. Most are surplus items previously used by local university hospitals. Private ... morecompanies, government institutions and agencies. Customer satisfaction is our#1 priority. Please subscribe to our store for and great deals. Thank you for your time and business. LAB-LINE ROTARY AUTO-PLATER 1580 Unit powers up and spins. This item was removed from a working environment.does not include beaker or magnetic stirrer. Please feel free to ask question(s) if you have any. Thank you for your time and Business. 14 DAYS DOA GUARANTEE FOR FULL REFUND. Please visit our store(Click Here! for more laboratory equipments that may meet your needs. Extra large items and items over 100lbs would require freight shipping. Please email me your shipping destination(commercial or residential) Zipcode, and if you require a lift gate or not for shipping quote. You can also request a pickup from your freight company if you have one. There would be a $75 pallet and packaging fee if pick up is requested. Fee would be waived if freight company would be packaging item on your behalf. Cost of shipping includes insurance. Packaging and handling fee. All items are professionally packaged and shipped. All pictures shown above are of actual product(s) sold. Please examine picture(s) carefully before bidding. Item(s) not shown in picture(s) or not stated to be included in auction will not be included in sale. Item(s) are sold-as-is as shown in pictures above. I do not warranty or provide calibration of any type unless otherwise stated. Warranty is only for 14 day DOA guarantee for full refund less shipping, buyer pays return shipping. Please visit my store for other great deals. Thank You For Your Time and Business Texas residents are subject to a 8.25% sales tax. USA Customers Items are shipped within two business days after payment is received. Items are shipped through USPS and UPS. Shipping price includes shipping and handling fees unless otherwise stated. I
Buy It Now
Free Shipping Condition: New Location: New York, United States (100mm) For Milling Machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates ... moreabout a horizontal axis. Simple to operate, they allow easy work handling and have many varied applications includes.
Buy It Now
$410.00 Shipping Condition: New Location: 松江区, China
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China CNC Engraving Machine Rotary Axis 4th Axis Hollow Shaft with 3 Jaw 100mm Lathe Chuck K11-100 CNC Dividing Head Specification Lathe chuck model: K11 100mm ... more3 jaws self-centering chuck Center height: 65mm Output shaft diameter: 20mm Axis hollow diameter: 21mm Angle: 0.3 degrees / step Reduction ratio: 6:1 (Synchronous belt deceleration mode) Stepper motor: 2phase nema23 stepper motor Accessories: one set of internal jaws and external jaws, and wrench Dimension: 210mm*168mm*115mm.
Buy It Now
$121.44 Shipping Condition: Used Location: Shafter, United States 10” rotary XY table. In excellent condition. You get the angle table as well with purchase.
Buy It Now
$19.45 Shipping Condition: New Location: Vista, United States The 4th Axis for your Sherline CNC Mill. This is an upgrade for the Sherline 8730 Standard Rotary table with a stepper motor. This is a modification of ... moreSherline's 4″ CNC Rotary Table with Stepper Motor.
Buy It Now
$20.00 Shipping Condition: New Location: Chino, United States Structural specifications: Product model: HT03RA100 Itinerary : 360° Table size: Φ100mm Transmission mode: worm gear (reduction ratio 1/180) Guide rail: ... morebearing Material: Aluminum-black anodized Weight: 1.7kg Resolution / Pulse: 0.01 ° (no subdivision) 0.0005° (20 subdivisions) Design resolution: 0.01°, non-MS drive; 0.0005° = 1.8", 20MS drive Rotation speed (maximum): 25° / sec Repeatability: 0.005° = 18" Absolute on-axis accuracy: 0.01° = 36" Top board beat: 15μm Recoil: 0.005° = 18" Eccentricity: 10μm Lost movement: 0.005° = 18" Parallelization: 80μm Load: 45kg Packing size: 23*13*16cm Gross weight: 2kg Package Included: 1X HT03RA100 rotating platform.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Structural specifications: Product model: HT03RA100 Itinerary : 360° Table size: Φ100mm Transmission mode: worm gear (reduction ratio 1/180) Guide rail: ... morebearing Material: Aluminum-black anodized Weight: 1.7kg Resolution / Pulse: 0.01 ° (no subdivision) 0.0005° (20 subdivisions) Design resolution: 0.01°, non-MS drive; 0.0005° = 1.8", 20MS drive Rotation speed (maximum): 25° / sec Repeatability: 0.005° = 18" Absolute on-axis accuracy: 0.01° = 36" Top board beat: 15μm Recoil: 0.005° = 18" Eccentricity: 10μm Lost movement: 0.005° = 18" Parallelization: 80μm Load: 45kg Packing size: 23*13*16cm Gross weight: 2kg Package Included: 1X HT03RA100 rotating platform.
|
|
|
|
Short Number 5 Morse Taper Center,Lathe,Rotary Table,Indexer
This is a very lightly used used number 5 Morse taper center. Could fit a lathe head stock.Rotary table, or indexing head. Like New. Short 3 3/4 inches in length. We combine shipping.
|
|
|
Rotary Telephone RED Table Top A&T VTG R500DM Volume Adjustment PHONE Great!!!!!
This is a Vintage Red Table Top AT&T Rotary Dial Telephone R500DM with Volume Adjustment. It measures approx 8" x 9" x 4 1/2" It has not been tested so I do not know if it works or not. Because we cannot test it- it is being sold AS IS It shows some signs of use that you would expect from a vintage item. It appears to be in good condition! Please super size all of the images as they are part of the description. We will combine shipping whenever possible. We take great pride in our customer service and make every attempt to describe each item as accurately as possible. Unless listed and described as NEW this is a vintage item and has been used. It is not store new, therefore, it is being sold AS IS, so please email me with any questions you may have and be specific as you can so you have all the information you need to bid ... moreon it. Please ask any and all questions early. We usually do not go into the office on weekends or holidays and will not be able to answer questions until Mondays. We might be able to answer certain questions but anything re: measurements. Or anything very specific usually will not be answered until Monday. Any white spots and/ or lines you may see are a reflection from the flash and/or lighting in the room. They are not on the item itself unless otherwise noted. If a return is necessary we ask that you please contact us before starting the return process. Items can be returned if you have not used the item and it is in the same condition as sent to you and if applicable include all tags. Labels, packaging, boxes and papers. Both original and return shipping are not refundable. INTERNATIONAL BIDDERS: Please do not ask us to put false information on the customs papers. We will not. Thanks for looking and bidding. Shelf W1. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14b4b6343e0-0x105-
|
|
|
ERON No. 310 X/Y/Theta Small Milling Machine X-Y Rotary Table 5" Travel
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- ERON No. 310 X/Y/Theta Small Milling Machine X-Y Rotary Table 5" Travel Only what is listed above and/or shown in the pictures below are included in this auction. This auction is for an ERON model No.310 milling table. This is a smaller unit that has rotary plus X and Y movement. Total travel of the stage is about 5" The unit has slots in the bottom for mounting. The top table measures about 6.5" x 7.5" Weight of the unit is about 51 pounds. Used item in good physical condition. There are some signs of light rust on the base plate of the unit(see photos) There is some backlash when switching directions on all the axis. Unit would probably use a good tear-down ... moreand adjustment to put it in best shape. This item is being sold with a 30-day warranty. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the S/H indicated by the shipping calculator for your ZIP code. We do not try to make(or lose) money on our S/H cost. We try to offer quality shipping at a fair price. We use new boxes. Peanuts, and bubble wrap and try to pack our items well(check our feedback) We pack items immediately after auction closing. If you are bidding on multiple items please contact us and we will be happy to combine items if possible to lower cost. This item will be insured for the winning bid amount. Shipping is limited t
|
|
|
Uvt Rotary Table , Dividing Head
Universal Vice and Tool Dividing Head Rotary Table# RT8 in good working condition Needs cleaning
|
|
|
M&MPrecision Roto-Grind 10" Horizontal / Vertical Rotary Table Model 710.IV.LAB
ebay template M&M Precision Systems Inc. Roto-Grind 10" Horizontal/ Vertical Rotary Table Model 710.IV.LAB Good working condition with little signs of minor wear from previous use. FEATURES Power control box with Forward& Reverse 10" diameter surface diameter SPECIFICATIONS Horizontal table height: 5-3/4" Vertical center height: 5-5/8" Center bore: 3/4" Overall Dimensions: 13" x 11" x 5-3/4" INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item ... moreis sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we have to bring in special equipment or call a mover. Note: Most of our listings are marked Freight shipping. We ship via FEDEX and USPS for item(s) 150lbs or lighter. The cost of shipping will be sent via invoice. We encoura
|
|
|
HAAS HA5C TAILSTOCK FOR 5C INDEXER ROTARY TABLE 4" CENTER LINE LMSI
HAAS TAILSTOCK FOR HA5C INDEXER HAS BEEN TESTED AND SERVICED PLEASE CHECK OUT THE PICTURES WHEN YOU SCROLL DOWN COMES WITH EVERYTHING YOU SEE IN PICTURES IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by ... moree-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is met. Any item purchased at $ 500.00 or more will require a note from a certified technician stating that the part is non working and that the item was installed by a certified technician( this proof must be on a document and hand signed by the technician. Along with the technician's name, business address and phone no. it may
|
|
|
HAAS TR-110 TRUNNION ROTARY TABLE BRUSHLESS TR110 INDEXER 4TH & 5TH AXIS LMSI
HAAS TR-110 TRUNNION ROTARY TABLE 4 TH& 5TH AXIS ROTARY TABLE HAS BEEN TESTED AND SERVICED PLEASE CHECK OUT THE PICTURES WHEN YOU SCROLL DOWN COMES WITH EVERYTHING YOU SEE IN PICTURES THIS UNIT IS A BRUSHLESS TYPE WITH SIGMA 1 MOTOR LOT# 6 IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. ... moreBefore sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is met. Any item purchased at $ 500.00 or more will require a note from a certified technician stating that the part is non working and that the item was installed by a certified technician( this proof must be on a document and hand signed by
|
|
|
HAAS HRT-160 ROTARY TABLE BRUSHLESS TYPE HRT160 INDEXER 4TH AXIS 160 LMSI
HAAS HRT-160 ROTARY TABLE 4 TH AXIS INDEXER RELATIVELY NEW CONDITION. ONLY USED ONCE! HAS BEEN TESTED AND SERVICED PLEASE CHECK OUT THE PICTURES WHEN YOU SCROLL DOWN COMES WITH EVERYTHING YOU SEE IN PICTURES THIS UNIT IS A BRUSHLESS TYPE WITH SIGMA 1 MOTOR LOT# 5 IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process ... moreand verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is met. Any item purchased at $ 500.00 or more will require a note from a certified technician stating that the part is non working and that the item was installed by a certified technician( this proof must be on a docu
|
|
|
SouthWorth Rotary Lift Table 43 1/2" Model P.PAL II R-4
Southworth Rotary lift table Model- P.PAL II R-4 Serial- 47280-01/X16814-000-06 The table top measures 43 1/2" 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b4d00a522-0x107-
|
|
|
Moore Special Precise rotary table, 2 sec accuracy verified by chart
Here is a very nice Moore Special Precise rotary table. These were tables built to a higher degree of accuracy than the regular +/ 6 sec. accuracy"Precise" ones. These were typically accurate from +/ 2 to 4 sec. Once Moore was able to consistently build +/ 2 sec. accuracy tables. They were called"Ultra-Precise" and stamped UP. This particular table that is for sale has an accuracy of +/ 2 sec as verified by the chart. If you use the chart and make local corrections in the handle movement accordingly. You can get an effective accuracy of about +/ 1 second. This table was used on a Moore Measuring machine and never saw chips or grinding dust. Payment to be by check or wire transfer. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct ... moreat warren9@zoominternet.net or call 610-932-4019. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
|
|
|
MACHINIST LATHE MILL 8" 3 Axis Rotary Table for Milling Machine Palmgren
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
|
|
|
Bridgeport Style Right Angle Bracket Pedestal Base Rotary Table Milling Machine
This auction is for the right angle pedestal base casting that supports some brands of rotary tables at 90 degrees(vertical) on a milling machine table This one measures about 12" tall by 8-13/16" wide by 10-1/16" deep. The mounting holes spacing is as follows; See picture#4; the diagonal spacing between the top and bottom mounting holes is about 10-1/32" approx. 255mm) See picture#5; the top two mounting holes are about 6-11/16" wide apart(approx. 170mm) See picture#6; The bottom two mounting holes are about 3-1/8" apart(approx. 80mm) This casting still has it's original paint from when new It has some paint chipped off in a few spots and a little very light surface oxidation in a few spots where the bare cast iron was exposed But this could easily be cleaned up with a 3M Scotch-bright pad. The original ... moremachining marks are clearly seen on the bottom of it's base with no pitting. There are several other right angle pedestal bases currently for sale on ebay that are advertised as for Bridgeport type rotary tables. The one we are selling appears to be very similar if not identical. they look exactly the same to me) Check your rotary table's mounting point.dimensions Please contact us with any questions you might have. We welcome free local pick-up; we are 30 minutes north of San Diego g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b50022d55-0x107-
|
|
|
rotary precision table 100mm 4in. 360º indexed dover newport maxon dc motor
rotary precision table 100mm 4in. 360º indexed dover newport maxon dc motor Perfect condition pulled from sagita wafer polisher. You like this. Check out my auction page.
|
|
|
VINTAGE CRAFTSMAN 8" ROTARY TABLE-CROSS SLIDE XYZ GREAT CONDITION
You are bidding on a VINTAGE CRAFTSMAN 8' ROTARY TABLE/ CROSS SLIDE XYZ THAT HAS BEEN CLEANED INSPECTED AND IS IN GOOD WORKING CONDITION. SEE PHOTO’S Best Describes the Item up for Auction. Buyer pays S&H.US Buyers If you have any questions or concerns please email me before bidding at. Winning bidder to pay within 3days of close of auction. Good luck bidding. Auction. I will combine shipping on auctions to save on shipping costs. Note to all buyers I am not a expert on this item please ask questions I answers all questions email to me right up to 4 hour before auction ends. Also I expect email contact from buyer within three days Once you receive your item. Please remember to leave feedback. If you have any questions or problems, please email me so we can resolve the issue. Negative feedback does not solve the problem, communication ... moredoes. I am committed to give the best customer service possible Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Palmoren 8" Rotary Table
Used 8" Rotary Table as seen in pictures 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b51da3b45-0x109-
|
|
|
SMW Accu-Smart 55 4th axis CNC rotary table controller
Here is a SMW Accu-Smart 55 rotary table controller. It was recently tested in working condition. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019.
|
|
|
SMW System 30 4th axis CNC rotary table controller
Here is a SMW System 30 rotary table controller. It was recently tested in working condition. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019.
|
|
|
SIP PD-1H optical rotary table, 8 3/4" diameter, 82 lbs, 1 sec. resolution
Here is a SIP 8 3/4" optical rotary table. The resolution is 1 second. The weight is 82 lbs. Payment to be by check or wire transfer. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019.
|
|
|
2007 Haas HRT 600 4th Axis Rotary Table, 23.6" Diameter, and More!
7918 E McClain Drive Suite 101 Scottsdale AZ 85260 Tel: 480-212-0775 Fax: 480-922-1675 One(1) 2007 Haas HRT 600 ROTARY TABLE. CNC Control: General Specifications: Table Diameter: 23.6" Table Hole Diameter: 7.5" Center Height: 14.5" Max. Torque: 450 Ft/Lbs, Number of T-Slots: 6, Blacklash: 30 Arc-Secs, Speeds(Deg/Sec) 0.001 to 50 Degrees/Sec, Resolution: 0.001, Air Pressure: 120 PSI, Center Height: 14.5" Weight: 1450 Lbs. Equipped with: All 4th Axis Cabling to Machine, Air Pressure Line and Valve, We can provide shipping quotes upon your request. Contact K.D. Capital Equipment at 480-922-1674 with any questions. Etc. Any descriptions of the condition of the equipment are not warranties and any equipment descriptions are intended only as a guide and their accuracy is not guaranteed and must be independently verified by the ... morebuyer. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b51dd291a-0x118-
|
|
|
VINTAGE WOOD WALL RECESSED TELEPHONE TABLE STAND DESK ROTARY DIAL PHONE NOOK
VINTAGE. WOOD WALL RECESSED TELEPHONE TABLE STAND DESK ROTARY DIAL PHONE NOOK! APPROX. 19 1/2" x 17" INSERT DIMENSIONS = APPROX. 16 1/2" x 13 3/4" SALVAGED FORM AN OLD FARM HOUSE IN NORTHERN KENTUCKY. GREAT CONDITION. BUT THE BOTTOM SHELF LOOKS LIKE IT HAS BEEN BROKE OFF(SEE PICS) I WIPED IT OF. BUT DID NOT USED ANY CLEANER ON THE WOOD! PAY-PAL ONLY SUPER FAST SHIPPING TO ALL 50 STATES. AND THROUGH THE E BAY GLOBAL SHIPPING PROGRAM!
|
|
|
MAKE OFFER Milichex rotary index table double set Rare 360/96 stop Ultradex type
This listing is for a set of two 12" size Milichex(Ultradex-type) precision rotary index tables produced to be a compound system by the Michigan Tool Co of Detroit. MI. This system was produced under license from A.A. Gage Co. The manufacturers of the Ultradex brand index tables. High accuracy and repeatability are characteristic of the A.A. Gage patented system. This consists of two 12" Milichex tables: One model IX-960-12. Serial F572 with 96. 3.75 degree divisions; and One model IX-3600-R-12. Serial F588 360. 1 degree divisions. These tables can bolt together to provide a compounded number of indexes. These tables can also be used separately. For freight shipment these tables will be separated from their stacked configuration as seen in the photos. EACH table weighs approximately 185 pounds. U.S. Sales and shipments only. 30 ... moreday return policy- Satisfaction assured! Manually-controlled compound sets of highly-repeatable. Positive-positioning rotary tables rarely appear on the used market. Pricing when new? this system is offered here at a small fraction of the cost of a Moore or other table systems in this precision category. MAKE AN OFFER. CONDITION: This equipment is in excellent condition. Mechanisms all operate smoothly. There are no inventory marks or engravings. If you can't come to Vermont to pick-up yourself. Then careful padding and crating for freight shipment will be provided at no charge. Logistics: U.S. Sales and shipments only. Shipping is not included. If you can't come to Brattleboro Vermont 05101 to pick up in-person. A motor freight shipment can be arranged at an additional charge. If pick-up will be by a motor freight carrier. Appropriate padding and sturdy crating will be provided at no charge. We've entered shipment details into eBay's system. Which should(should) allow you to obtain a motor freight quote at Freightquote. To get your quote. Go to the link on this page at the shipping section of this eBay listing. If you have problems getting a freight quote. Please
|
|
|
Tsudakoma Model: RNCM-301R 320 mm / 12.6" Rotary table
Tsudakoma rotary table model RNCM-301R Diameter: 320 mm/ 12.6" Info: 802-558-2773 Freight Quote with C.H.Robinson Worldwide
|
|
|
HAAS Rotary Table Manual - HRT210SHS
This is the 62 page manual for the 210mm HAAS Rotary Table. Covering specifications, setup, operation, programming the controller, programmable parameters, troubleshooting, maintenance, and detailed parts schematics. The manual is in good condition and all pages are legible.
|
|
|
Okuma MC-V4020 CNC Vertical Machining Center w/4th Axis rotary table 50 Taper
2005 Okuma MC-V4020 Specs Table Size.48.37" x 20" Max Table Load.1500 LBS X Travel. 40" Y Travel.20" Z Travel.17.72" Rapid Traverse. X&Y Axis)1417 IPM(Z Axis)1181 IPM Taper.CT-50 Spindle Speed.40- 6000 RPM Spindle Motor.20 HP ATC.32 Tools Weight.16.000 lbs Equipped With: OSP-E100M Control. 4th Axis Rotary Table, Z Axis Riser, If you have any question. Please contact sales at 253-830-4722 or email Brayton@capitalequipmentinc.com Payment: Machine will be paid in full before shipment Preferred method of payment certified check or wire transfer There will be a 3% charge for payment through PayPal Shipping: Buyer is responsible for freight; arrangements and costs All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final Small items are shipped ... morevia UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours after funds have been approved. If you have any questions. Please contact me
|
|
|
15"Dia. Transfer Rotary Turn Table S/S for 90 deg. Turn
15" Dia. Transfer Rotary Turn Table S/S for 90 deg. Turn. The Transfer turntables are designed to move your containers from one conveyor to another in you packaginag line. They can be added to your existing line. Turntables are powered tables that load. Unload and transfer bottles to and from the conveyor. Unit is removed and ready to ship. $75 charge for Crate(Outside of Shipping& Handling Cost) Crating Fee Waived if picking up and don’t need it crated. The shipping service that we offer is only for the 48 lower states. It does not include Hawaii, Alaska, or any off-shore US Territories) Description Information Tabletop Diameter 15” Material Frame: Stainless Steel Disc: Stainless Steel 1/8” thickness Motor Drive 1/8 HP Voltage 90 Volts Variable speed control YES Height floor to Disc 32" to 36" Adjustable height 4" ... moreOutside Dimensions 20” Dia x 36" H Weight 40 lb Other Specifications· Outside Rim Lip to prevent packages from falling off table Condition Good working condition. Location Miami. FL USA REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for
|
|
|
2000 HAAS VF-2D CNC VERTICAL MACHINING CENTER - 4TH AXIS ROTARY TABLE, TOOLING
HAAS VF-2 CNC VERTICAL MACHINING CENTER W/ FULL 4 TH AXIS HRT-210 CNC ROTARY TABLE N EW 2000 EQUIPPED WITH FULL 4 TH AXIS WITH HRT-210 CNC ROTARY TABLE MIDACO 3050 PALLET CHANGER WITH 3 PALLETS MISCELLANEOUS TOOL HOLDERS KURT VISES 20 HP VECTOR DRIVE CHIP AUGER SPECIFICATIONS TABLE WIDTH: 14" LENGTH: 36" MAX WEIGHT ON TABLE: 3000 LBS T-SLOTS(WIDTH) 625" T-SLOTS(CENTER DISTANCE) 4.92" TRAVEL X AXIS: 30" Y AXIS: 16" Z AXIS: 20" DISTANCE. SPINDLE NOSE TO TABLE: 4" 24" SPINDLE TAPER SIZE: 40 TAPER SPEED: 0– 7.500 RPM BEARINGS: ABEC CLASS 7 BEARING LUBRICATION: AIR/OIL INJECTION COOLING: RECIRCULATING OIL ORIENTATION: AIR-ACTUATED SHOT PIN TOOL CHANGER CAPACITY: 20 TYPE: CT-40 PULL STUD: JMTBA STANDARD 45 DEG MAX TOOL DIA(20 TOOLS) 3.5" MAX TOOL WEIGHT: 12 LBS FEEDRATES RAPID ON X.Y,Z AXES: 1000 ... moreIPM MAX CUTTING FEEDRATE: 500 IPM MOTORS SPINDLE MOTOR. MAX RATING: 20 HP AXIS MOTOR. MAX RATING: 5.0 HP AXIS MOTOR. MAX THRUST RATING: 3400 LBS ENCLOSURE MATERIAL: 14 GA COLD ROLL STEEL DOOR OPENING WIDTH: 35.5" GENERAL DIMENSIONS: 88” LR X 92.80” FB X 104.5" H MACHINE WEIGHT: 8.000 LBS COOLANT FLOW RATE: 10 GPM COOLANT CAPACITY: 30 GAL AIR REQUIRED: 4 SCFM 100 PSI MIN POWER REQUIRED: 25 AMPS(FLA) 200-250 VAC ELECTRICS: 220 VOLTS. 3 PH, 60 CYC HIMES MACHINERY LLC. PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
Rotary International Round Table aka 'Jr Rotary' in UK, England, Britain - 1984
You will receive the pin photographed: A spot of tarnish- no attempt to clean. The letters on the reverse(out of focus photo) are TKS. Padded letter; $0.71 postage.
|
|
|
SMC Pneumatic Actuator Rotary Table/Rack & Pinion 190? MSQB30R-F9N
SMC MSQB30R-F9N Pneumatic Actuator Rotary Table/Rack& Pinion 190. SKU 48000
|
|
|
Troyke 9'' rotary table fits Bridgeport
Used Troyke 9" Rotary table. over all in decent shape. the painted base is chipped and dirty from being used. has about 1/16th of turn of back lash in rotary handle. the table has minor surface stains as shown in pictures. selling as is. In working order. This part can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri. This machine is for sale locally, so the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be ... morecharged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b593768d7-0x107-
|
|
|
Rotary Table Indexer Horizontal Vertical Model HVRT8 - PICK UP OR I CAN SHIP
HORIZONTAL/VERTICAL ROTARY TABLE INDEXER(MODEL#HVRT-8) This item can be picked up or shipped. Shipping cost will be around $50.00(give or take a few dollars) Note: Winning bidder- Please wait for me to invoice you so that I can include the exact shipping charges on your invoice. These items are part of large storage sale. All items are being sold"As Is" Check my other listings throughout the next(14) days for all items being auctioned. If you would like to purchase more of my items. I will store the items won up until February 22, 2015 as long as payment has been received at the end of each auction for the items won. This will make it more convenient for those who need to pick up more than one item. Happy Bidding-
|
|
|
Tailstock Haas Hrt310 Nikken Tsudakoma Troyke 4th axis rotary table Clausing Cnc
The sale is for a 4th axis tailstock. With 9.000" center height. 5mt taper. This unit was being used with a Haas HRT 310. As you can probably tell from the photos this unit started life as a tailstock for a 20 inch swing Clausing Lathe. If you have any questions or would like to make an offer please call or text me at 573-578-9890 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14b5ba6cc48-0x104-
|
|
|
2005 Haas HRT450 Rotary Table - Item #713
0 0 1 32 187 ReSell CNC 1 1 218 14.0 96 800x600 Normal 0 false false false EN-US JA X-NONE 2005 Haas HRT450 Rotary Table Item#713 SPECIFICATIONS: Diameter. 17.7” Number of T-Slots. 6@60 Degrees Max. Speed. 0.001-50 °/Sec Max Torque. 400 ft-lb Gear Ratio. 72:1 Timing. 3:1 Backlash. 30 Arc-Secs Weight. 850 lbs 0 0 1 25 145 ReSell CNC 1 1 169 14.0 96 800x600 Normal 0 false false false EN-US JA X-NONE ReSel l CNC Servicing the Needs of Manufacturers Worldwide ORLANDO | CHICAGO | HOUSTON | LOS ANGELES 2600 Maitland Center Parkway#290 Maitland FL. 32751(Office) 407-478-8181 ext. 221 TERMS: Full payment via bank wire prior to removal-See Terms& Conditions for details. Machine sold"as is where is" with no expressed or implied warranties-Machine sold free and clear of any and all liens and encumbrances. Out of state sales no taxes. ... moreBuyer responsible for all rigging and shipping charges. Subject to additional Terms and Conditions found on reverse side or attached hereto which customer acknowledges it has read and agreed to an invoice. Signature acknowledges final Invoice as a legal binding contract. Any and all disputes will be handled under Florida law in Seminole County. ReSell CNC LLC Location(Office) 2600 Maitland Center Pkwy. Suite 290 Maitland. FL 32751(Warehouse) 1065 Nursery Rd. Suite 1115 Winter Springs FL 32708 Quotations and
|
|
|
Yuasa UDX-5CAR-4 Multi Spindle 5C Collet Style Rotary Table Indexer Pneumatic
This sale is for a Yuasa UDX-5CAR-4 Multi Spindle Rotary Unit. Unit was taken out of service 8/2010 and has not been used since. It was in operational condition when taken down; the shafts will have to be moved in order to reassemble the 4 spindles; one of the units has the end plug on the wrong side currently. I have additional connecting shafts and couplers if you need them. The motor has a 22 pin plug. But does not come with controller. All pieces spin freely by hand, beyond that I am not able to test without the control box. Unit can be shipped in 4 individual boxes via FedEx ground to any business or FedEx facility(NOT RESIDENCE) It can also be crated at an additional cost to be shipped via dry van. Buyer can arrange shipping or receive a quote from the seller. There are no warranties being offered or implied with this sale. Please feel ... morefree to ask any questions. Thanks for looking.
|
|
|
Troyke DL-10B CNC Rotary Table
CNCROTARY Welcome to our eBay Store, 0870 061 9000, sales@cncrotary.com, Zeatz House, Gisborne Close, Chesterfield Derbyshire S43 3PT, MON- FRI 9.00am- 5.00pm, Click on the Thumbnail to enlarge. Troyke DL-10B CNC Rotary Table, £2000.00, Product Specification, Dimensions: Diameter: 10" Height: Material: Condition: Seller Refurbished Total weight: Transmission ratio: Description, About us, Payment, Shipping Policy, Returns Policy, Contact us, The Troyke table was generally used in conjunction with the Cincinnati Sabre and Arrow range of machines. And is offered in the first instance without motor or cable set but can be prepared for connection to any machine tool at reasonably low cost The device is fully refurbished and comes with 12 months parts and labour warranty. Has a 10” faceplate with motor(when fitted) mounted to the rear ... moreof the device as a space saver for the Y axis traverse The unit is available as seen in the photographs for a special net price of £2.000 GB Pounds, subject to the addition of VAT to UK customers. Carriage to UK addresses is included. Free technical interface help is available We have hundreds of rotary devices available from stock from a wide range of makers. Please call us for free help and guidance We also carry cables. Connectors, motors, drives, tailstock, chucks and lots more call us, or check out www.cncrotaryshop.com Free UK Shipping. International shipping costs by separate negotiation. Price Excludes VAT which is chargeable where applicable. A Range of Special Offers also available via our web shop CNCROTARYSHOP.COM take a look. You will also find motors, encoders, cables, connectors and more! CNCROTARY.COM. Zeatz House, Gisborne Close, Staveley, Chesterfield. S43 3PT(UK) Email: ebay@cncrotary.com Tel: +44(0)870 061 9000 Shop: www.cncrotaryshop.com Thank you for looking. CNCROTARY.COM are a unique company boasting over 100 years of combined experience in working with all makes and models of rotary and rotary tilting table. Our years of experience in refurbishing.
|
|
|
Haas HRT 210 Programmable Rotary Table (Brushless Drive)
THIS ITEM IS OWNED BY AND LOCATED AT MACHINESUSED.COM. 2410 Niagara Lane, Plymouth, MN 55447- CONTACT US TO DISCUSS THE MACHINE AND TO ARRANGE INSPECTION OR PURCHASE AT 763-745-1166 OR EMAIL US. Haas HRT 210 Programmable Rotary Table(Brushless Drive) Manufacturer: Haas. Model# HRT 210. Specification: Faceplate Diameter 8.27" Number of T-Slots 6. Torque(ft-lb) 210 Ft Lbs. Center Height 6" Hole Thru Spindle 2.00" Resolution(Deg. 001 Degree. Feed Rates.001 to 60 Deg/ Second. Motor 1.5 HP. Equipped With: Haas HRT 210 Programmable Rotary Table(Brushless Drive) Interface Cables and Connectors, 8.25" T-Slotted Face Plate. 2" Thru Hole- Excellent Condition- Like New. Electrics: 115 Volt Single Phase. Approximate Machine Dimensions: 21"L x 7.5"W x 13"H. Approximate Weight: 165 lbs. Haas Servo control Box 11.25 ... more12.75 6.5 16. FOB Open Top Truck.
|
|
|
Vintage Rotary Dial Comdial Trimline Brown Telephone Table Desk Phone
Vintage Rotary Dial Comdial Trimline Brown Telephone Table Desk Phone Tested to work. Shows signs of wear. But overall good condition.
|
|
|
Mazak 4th axis Tsudakoma RNCM-301R 12.59" rotary table Fanuc servo
Up for sale is a Mazak 4th axis. Its a Tsudakoma RNCM-301R with a 12.59" face plate(320 mm) it uses a hydraulic brake and a Fanuc servo. the specs can be found at cnc1.com/ images/customer-files/Tsudakoma-RNCM.pdf. It is used and i have no way of testing it so it is being sold"AS-IS" it does have a large dent in the front right side of the sheet metal, i tried to get this in the pictures but you have to look for it since it isnt obvious in the pictures. Shipping will be at buyers expense and the buyer arranges shipping. It shows that its 440 lbs + a pallet weight of approximately 50 lbs. coming from a residential address in Saint Charles, MO 63303 and will need a lift gate at pick up. local pick up is welcome.
|
|
|
Colombo Filippetti I-24040 Rigidial Rotary Index Table w/ Flange RIG 09-16-P002
ITresales2 Give us a call at(408) 274-2018 E-waste Recycle We will pay $10 each Un-wanted Computer. Reused Please contact us if you have IT. Test Equipment and Secmiconductor equipment for sell. Give us a call at(408) 274-2018 Store Categories, ITresales2 Colombo Filippetti I-24040 Rigidial Rotary Index Table w/ Flange RIG 09-16-P002*SC1 Condition This item was used and pulled from the working system. Though the unit is tested and is 100% functional. Description Colombo Filippetti I-24040 Rigidial Rotary Index Table w/ Flange RIG 09-16-P002 Used Unit, Actual Pictures Payment ITresales2 Accepts VISA. MasterCard, American Express With Paypal only. Taxes- United States States Rate California 8.25% Taxes- International Customs. Duties and taxes are due for any shipment sent by ITresales2 outside the United States. ITresales2 is required by law ... moreto provide an invoice with each package sent outside the United States. We cannot ship internationally as a gift. Please note your government will assess taxes. Customs and duties on top of the purchase price. We strongly recommend you check with your country’s customs office to determine what additional expenses might be incurred on purchase. We will not mark merchandise values below value or mark items as“gifts” Shipping Methods& Costs Buyer pay fix amount shipping cost $160 in the 48 states. Canada. Hawaii and Alaska pay the actual shipping cost. Shipping by Fedex. UPS and USPS. All purchases are fully insured and have tracking numbers. We will send you this number automatically via email once your package ships. Please note that orders paid via Credit Card can only be shipped to the billing address for the card. We only ship to Paypal confirmed addresses in the United States. Canada and the United Kingdom. We do not ship to the following countries: Ukraine, Russia, Indonesia, Payment must received within 5 business days after our confirmation was sent to all winning bidder. If the payment is not received with in 5 days. The order is cancelled and none payment
|
|
|
rotary table Yuasa model 550-054 used excellent condition 13 3/4"
In excellent overall condition but has one locking handle missing. Lock is still useable. There is minor bend in the dial shaft which does not interfere with use.
|
|
|
SIP PD-3, PI-4, PI-5 Rotary Table Index Kit, Plates
SIP PD-3. PI-4, PI-5 Table Index UnitSociete Genevoise PrecisionFeatures-Convert your PD-3, PI-4 or PI-5 Table to a Dividing Head with this original SIP Index Unit. Includes(4) Index Plates, Pin Indexing Handle and everything pictured.Very well maintained, pictured is actual item.Call 248-568-6824 with any questions.Made in Switzerland
|
|
|
Vintage Rotary French Style Telephone Table. Museum Item
Description Vintage Rotary French Style Telephone Table. No Receiver. As Is Condition. Measures; 29.5 inches tall and the widest part measures 15 inches in diameter. We Will Not Ship This Item In-House Due to Its Size. But Would be Happy to Recommend a List of Gallery Approved Vendors on Request.
|
|
|
Nema23 Manual Adjust Knob for Parker Daedal Rotary Indexing Positioner Table
Manual Adjustment Knob for Parker Daedal Rotary Positioner*Auction price is for 1 control knob. I have 4 available* This auction is for a used Parker manual adjustment knob for a rotary positioner indexing table. It has a nema23 mount with a 1/4" dia. output shaft. I believe it is for a 180:1 ratio table(180 turns of adj. knob = 1 turn of rotary table. Or 1 turn of adj. knob = 2 degrees of rotation of rotary table) This could also be used as a maual control knob for a linear actuator. Depending on the pitch of the leadscrew or ballscrew. It will fit any nema23 motor mount with a 1/4" dia. coupler. Shipping rate applies to US only(includes Alaska& Hawaii) International orders will be shipped via Ebay's'Global Shipping Program' Please click on the'Shipping and Payments' tab above and select your country from ... morethe drop-down menu to get a shipping quote from Ebay. If your country is not listed then please contact me for a shipping quote before placing a bid.
|
|
|
VINTAGE MONOPHONE ROTARY DIAL TABLE PHONE
VINTAGE ROTARY DIAL MONOPHONE BY AUTOMATIC ELECTRIC CO. IN GOOD SHAPE! NOTE, UNTESTED, I don't have a land line to test it)
|
|
|
Vintage Land line Rotary Dial Telephone Decorative Victorian Table Phone
Vintage Land line Rotary Dial Telephone- Decorative Victorian Table Phone Gold and Cream- Used- Good Shape- Some wear on head phones- Very Clean Piece Phone Measures 10" wide x 6" deep x 9" tall
|
|
|
Haas Brushless Rotary Control Table Indexer Dual Two Axis., NO RES
Haas Rotary Control dual Axis Haas Brushless Rotary Control Table Indexer Dual Two Axis Brand:Haas this item is used but in good working condition serial number 802381/ 230 volts ac 1 phase 50/60 hz HAVE ANY QUESTIONS AT ALL PLEASE ASK BEFORE YOU BID. IF YOU ARE NOT HAPPY ABOUT YOUR ITEM WHEN RECEVING IT PLEASE CONTACT ME BEFORE YOU LEAVE FEED BACK AND REMBER YOU PAY RETURN SHIPPING THANKS AGAIN AND HAPPY BIDDING
|
|
|
palmgren 8" 3 axis ajustable angle rotary table
Nice US made 8" rortary tilting table it seems to have hardly any ware.
|
|
|
Vintage Western Electric Bell System Beige Table Desktop Rotary Phone 500DM
For auction is a Vintage Western Electric Bell System Beige Table Desktop Rotary Phone. 100% tested works great. Has two stickers on it and I wanted to leave them on so that the winning bidder can do what they choose with them. I've also wiped phone and cord down but can probably still use another cleaning. One cord end is pulled out some but still works. See pictures for full condition and description. Thanks for stopping by left2right_lost_n_found.
|
|
|
vtg AT&T Tan Cream Desk Table Top Rotary Telephone Bell Systems
Bidding on a Vtg AT&T Tan Cream Desk Table Top Rotary Telephone Bell Systems.everything all works great. Please view all of the photos as they are part of the description. If you have any questions please send an email. I will also combine items for shipping. International buyers welcome! I start some of my auctions low and let my items rise to its own value.Shipping cost vary upon your location there are no extras unless needed(insurance) If you are NOT satisfied"PLEASE EMAIL ME'I try and work with everyone to make my auctions fare& easy.
|
|
|
Tsudakoma "Big Bore" RN-300 CNC Rotary Table with CNC Control
TSUDAKOMA“BIG BORE” RN-300 CNC ROTARY TABLE S/N 021513 NEW 2002 WITH TPC JR CNC CONTROL SPECIFICATIONS: TABLE DIAMETER: 11.8” CENTER HEIGHT: 7.87” CENTER BORE: 3.97” WEIGHT: 396 LBS. TPC JR CNC CONTROL: MINIMUM INCREMENT: 001 DEGREE IMPUT SYSTEM: MDI PROGRAM CAPACITY: 1000 BLOCKS LEAD CUTTING COMMAND: INTERLOCKED OPERATION WITH MACHINE AXIS PROGRAMMABLE FEEDRATE: BY RADIUS AND SURFACE SPEED OR AMOUNT PER SECOND SUB-PROGRAM: UP TO 8 LEVELS SINGLE DIRECTION POSITIONING,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b6f7ba256-0x103-
|
|
|
#DL-10-B-MT TROYKE 10" Vertical CNC Rotary Table (New 2002)
Model: DL-10-B-MT TROYKE 10" Vertical CNC Rotary Table. S/N: 5062-2(New 2002) Specifications: Table diameter Table center height Overall height Center bore diameter Load capacity Clamp(Brake) torque Approximate speed range 10" 7.25" 13" 1.968" 600 Lbs. 350 Ft.Lbs. 0 to 10 R.P.M. Equipped With: Pneumatic clamping#TS-10 TROYKE tailstock with plain center Interface cables FANUC AC servo motor Approximate Weight: 246 Lbs. Location: F.O.B. Truck. Hauppauge- Long Island, NY- We Ship Worldwide Reference# XSA_GM3234
|
|
|
BakeliteTelephone USSR Period VEF Riga Black Rotary Bell Table Vintage (PO452)
VINTAGE 60's- 70's HOME DECOR VEF RIGA USSR PERIOD TELEPHONE BLACK BAKELITE. PO452) Weight: About 2.5 kg; 5.50 lb. VEF- Riga Electric Factory. Size Telephone: 19.0 x 14.0 x 14.0 cm; 7.50" x 5.50" x 5.50" Good Work. Nice Vintage Condition. Circa 1960- 1970 Year. Latvia. Shipping. All items are sent the Registered Airmail with acknowledgment of receipt of the package or letter. Delivery time is usually from 12- 20 working days to USA. For Europe 7- 11 working days. Please contact us first for status ALWAYS shipment before feedback. Goods sent to you very carefully packed to avoid damage and any damage. So your product you will get the full integrity and security. Each package is registered with the unique International Airmail ID. Online tracking information is available in some countries. if supported“Track and Trace” ... moreSystem) Beware that sometimes there is a delay before the tracking number is registered with the carrier. Payment Policy. PayPal. Payment must be sent within 48 hours(2 days) If you have a delay in payment. Please contact me. Any problems or concern please let us know and we will make sure to take care of it for you. We offer a 100% full money back policy with full shipping included to ensure full coverage of all buyers. Buy with confidence! If you are not satisfied in any way. Please contact us first so we can work things out together. I will guarantee a satisfactory solution for you. Return Policy. Any item may be returned for refund within 14 days of receipt. Item(s) must be returned in original condition. Combining Policy. We combine the item you bought. You need to contact me to discuss this issue. Contact Us. If you have questions. Do not hesitate to write to us through'contact seller' link. We usually reply within one business day. Thanks For Looking.
|
|
|
Vintage Table Top Telephone Black Hard Plastic Rotary Dial American Electric
Vintage Table Top Telephone Black Hard Plastic Rotary Dial American Electric- Works. Plugs into a regular wall jack. Needs a gentle cleaning- been in dusty storage. We try to examine all pieces closely and note any issues. Please ask any questions prior to bi dding to ensure you are satisfied with your purchase. We are a registered eBay trading assistant and are bonded through BUY SAFE. Bid with confidence. Flat rate shipping in the US is $10.00 priority mail. We do combine shipping on multiple lots and discount where able. Overseas clients are welcome. Please email for postal rate to your country. We are listing a number of new items this week. Please check out our other listings. We are happy to combine shipping whenever possible to save you money. Consignor- ML
|
|
|
Brown & Sharpe 10" Rotary Index Table Horizontal
574-825-4990 SKU: 62855 Brown& Sharpe 10" Rotary Index Table Horizontal. Brand: Brown& Sharpe Size: Length: 20 in. Width: 16 in. Height: 7 in. Condition: Used Country of Manufacture: United States Consigner: C Items in Lot: 1 Lister: 8 Weight(lbs. Oz) 73.0 CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer ... morein USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Please call us at 574-825-4990 with the Bullseye SKU# or eBay item number(s) of the items that you wish to purchase. FREIGHT ITEMS Please DO NOT pay for freight it
|
|
|
Sears Craftsman vintage 8" Cross Slide Rotary Table, Palmgren Mfg
Almost like new Palmgren 8" dia X-Y Rotary Table with Sears Craftsman brand. In original Sears box with original shipping label showing shipment to Sears warehouse in Atlanta, GA, like new except for a 1/4" dia hole drilled approx 1/4" deep just above and to the left of the center hole in the round table, complete with the original vise jaws and accessories as shown, some light rust on the edge of the round table, will come off with light steel wool, other dark stains are dried preservative grease, call 770-530-0212 for more details, will ship as directed at buyers expense
|
|
|
NOS Mint In Box GTE Rotary Dial Desk Table Telephone ~ NEW IN BOX ~ L@@K
NOS Mint In Box GTE Rotary Dial Desk Table Telephone ~ NEW IN BOX ~ L@K Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This WHITE/ IVORY rotary telephone is Unused and Perfect- NEW OLD STOCK. It was only removed from the box for the pictures. SATISFACTION GUARANTEED. I offer a 14 day money back return policy. Please ask any questions. GTE Rotary Dial Desk Table Telephone ~ UNUSED/ NOS in original box. ~ USA& Global Shipping: $15.27 ~ Paypal Accepted ~ inkfrog terapeak. I000000.
|
|
|
Rotary tool bench routertable, mitre saw, table saw. TABLE ONLY
Like new working condition. Great product.
|
|
|
SIP, SOCIETE GENEVOISE TILTING/ROTARY TABLE, 17 3/4" TABLE, TYPE PI-5
LOT 1066. SIP. SOCIETE GENEVOISE TILTING ROTARY TABLE. TYPE: PI-5. NO: 1934. TABLE SIZE: 17 3/4" BUYER IS RESPONISIBLE FOR ARRANGING PICK UP FOR THIS. BUYER PAYS THE SHIPPING. ANY QUESTIONS CALL 586-752-0090.
|
|
|
8.00" Horizontal / Vertical Rotary Table with Vernier Reading Collar
Slightly Used and well taken care of 8.00" Horizontal/ Vertical Rotary Table with a Vernier Reading Collar. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b7488c65c-0x112-
|
|
|
**COMPLETE REPAIR SERVICE** HAAS TR-210 ROTARY TABLE TR210 4TH & 5TH AXIS LMSI
HAAS TR-210 TRUNNION ROTARY TABLE 4 TH& 5TH AXIS ROTARY TABLE FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. FLAT RATE LABOR $ 3.800 IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission ... moreonly. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not a
|
|
|
**COMPLETE REPAIR SERVICE** HAAS TR-160 ROTARY TABLE TR160 4TH & 5TH AXIS LMSI
HAAS TR-160 TRUNNION ROTARY TABLE 4 TH& 5TH AXIS ROTARY TABLE FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. FLAT RATE LABOR $ 3.800 IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission ... moreonly. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not a
|
|
|
**COMPLETE REPAIR SERVICE** HAAS ROTARY TABLE HRT-210 4TH AXIS HRT210 LMSI
Check out my! HAAS HRT-210 FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. IF YOU LIKE TO SEE MORE HAAS ROTARY TABLES PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) VIDEO" Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within ... more7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criter
|
|
|
**COMPLETE REPAIR SERVICE** HAAS ROTARY TABLE HRT-210SP 4TH AXIS HRT210 LMSI
HAAS HRT-210SP FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. IF YOU LIKE TO SEE MORE HAAS ROTARY TABLES PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) VIDEO" Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. ... morePayments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the criteria below is
|
|
|
**COMPLETE REPAIR SERVICE** HAAS 5th AXIS ROTARY TABLE T5C4 HA5C HRT210 LMSI
HAAS T5C4 5TH AXIS ROTARY TABLE FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. HAAS HRT-210 LABOR- $ 950 FLAT HAAS HA5C EACH LABOR- $ 700 FLAT IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior ... morepermission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same typ
|
|
|
*COMPLETE REPAIR SERVICE* HAAS HRT-160 ROTARY TABLE HRT160 INDEXER 4TH AXIS LMSI
HAAS HRT-160 ROTARY TABLE FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. IF YOU LIKE TO SEE MORE HAAS CONTROL BOXES AND ROTARY TABLES. PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales ... morewithin 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We can ship by ups ground. For international shipping costs. Please contact us thru e-bay messages. Leopard Machine Sales return policy unlike many of our competitors we do not have a re-stocking fee of 25% or more. Zero(Zilch) re-stocking fees forever. We accept returns within 7 days from the date you receive your item. After the item is returned to us we will exchange it for another item of the same type if in stock. Otherwise a full refund will be given minus shipping charges. If the same type item is not available we will issue a monetary refund to you provided the
|
|
|
**COMPLETE REPAIR SERVICE** HA5C HAAS INDEXER 4TH AXIS ROTARY TABLE 5C LMSI
HAAS HA5C FREE ESTIMATE ONCE WE RECEIVE YOUR UNIT. THIS ADVERTISEMENT IS FOR COMPLETE REPAIR. THIS IS NOT FOR THE ROTARY TABLE SHOWN IN THE PICTURES TO BE ON SALE. THE PRICE IS FOR LABOR ONLY. REPAIR INCLUDES: THE UNIT COMPLETELY TO BE TAKEN APART. AND CHECK ALL THE PROBLEMS, ADJUST BACKLASH AND IT INCLUDES: NEW BEARING, SEALS, O-RINGS, OIL, AND GASKETS. THIS SERVICE DOES NOT INCLUDE: POWDER COAT PAINT. OR PARTS THAT DO NEED TO BE CHANGED. CUSTOMER PAYS FOR ALL SHIPPING CHARGES. IF YOU LIKE TO SEE MORE HAAS ROTARY TABLES PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) HA5C SPINDLE S.A.E. METRIC Max Speed 0.001 to 410 °/sec 0.001 to 410 °/sec Max Torque 60 ft-lb 81 Nm Nose Thread 2 3/16- 10" Runout Max 0.0004" 0.010 mm Backlash 40 arc-sec 40 arc-sec Center Height 4.000 ± 0.001" 101.60 ± 0.03 mm Gear Ratio 60:1 ... more60:1 Collet size std 5C 1/64- 1 1/16" std 5C 0.4- 27 mm INDEXING S.A.E. METRIC Max Rotation/Step 999.999 ° 999.999 ° Resolution 0.001 ° 0.001 ° Accuracy(±) 30 arc-sec 30 arc-sec Repeatability 10 arc-sec 10 arc-sec Worm Gear Dia 2.8" 71 mm GENERAL S.A.E. METRIC Power Requirement 115 VAC ±5% 10 A 115 VAC ±5% 10 A Air Pressure Max 120 psi 8.3 bar Operating Temp(max ambient) 100 °F 38 °C Duty Cycle(w/o tailstock) 75% full speed 75% full speed WEIGHT S.A.E. METRIC Rotary Head 48 lb 21.8 kg Brushless Control– Not Included 14.2 lb 6.4 kg Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combi
|
|
|
Palmgren 6285-1 8" rotary table double axis adjustment machinist toolmaker tool
Used table for your consideration. Works well. No need for it anymore with cnc machines now.
|
|
|
4th AXIS ROTARY TABLE INDEXER PATTER T-SLOTED FACE PLATE 8-5/8" DIA 1-3/8" HOLE
4th AXIS ROTARY TABLE OR INDEXER PATTER FACE PLATE LIKE NEW. 8-5/8" DIA w/ 1-3/8" HOLE W/ THREADED CENTER PUCK. 6) 3/8" MOUNTING HOLES ON 3-1/2" BC. 4-1/4" COUNTER BORE. 1/4" DEEP. 6) 1/2" T-SLOTS. GREAT FOR 4th AXIS ROTARY TABLE. ROTARY TABLE, INDEXER. CAN BE USED ON A MANUAL LATHE WITH A POINTER TO INDICATE POSITION. I DO NOT BELIEVE THIS INDEX PLATE HAS EVER BEEN USED.
|
|
|
5-1/4" DIVIDING HEAD OR ROTARY TABLE 4 HOLE INDEXING PLATE 16-57 PEGS
4 HOLE DIVIDING HEAD OR ROTARY TABLE INDEXING PLATE 5-1/4" DIA. X 3/8" THICK. 4 MOUNTING HOLES. 3/16" DIA ON 1-7/8" BC. INDEXES SIDE 1: 16.20,21,26,28,29. INDEXES SIDE 2: 31.38,43,47,53,57. I DO NOT BELIEVE THIS INDEX PLATE HAS EVER BEEN USED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b798fc6d7-0x106-
|
|
|
2010 Haas TR210 Trunnion Rotary Table for 4th and 5th axis work.
2010 Haas TR210 5 axis Trunnion Quote#1963-189 210 mm(8.27" Platter Diameter Approx Max weight for platter 200 lbs Approx. Part swing max 23.5 Tilting Trunnion Rotary Table. Requires Haas mill with 4th and 5th-axis drives New aprox $40.000.00 Price $28.500.00 Call George with questions or email george@rockfishmachinery.com
|
|
|
Sense 3D Laser Scanner Rotary Table for 3D Printer
Sense 3D Laser Scanner Rotary Table Tired of losing tracking in while scanning with your Sense 3D Laser Scanner? I have for sale this rotary table specifically designed for the Sense 3D Laser Scanner. It is fully adjustable for height. Scan angle, and distance from object. The arm has full 360 degree rotation around the object while always maintaining it in the centre field of view. It comes in really handy while trying to scan small objects. I'm looking at upgrading my 3D laser scanner so I have no need for it any more. Please note that the Laptop. Sense 3D Laser Scanner and model turbine engine are NOT PART OF THE AUCTION. You are ONLY bidding on the Rotary table itself. If you have any question. Feel free to ask and I’ll try to answer it to the best of my ability. International shipping available. Please ask for shipping quote. Also ... morenote that this unit is pretty heavy duty and it does weigh a bit so shipping is set at $49.99 Thanks for looking and good luck!
|
|
|
Kwikprint Hot Foil Stamping Printing AIR-ASSISTED ROTARY TABLE ACCESSORY
KWIKPRINT MECHANICAL TURNING TABLE ACCESSORY This rotary table came with a machine we bought. This accessory replaces the machine table. We didn't receive any explanation what this was used for. Looking at it. We believe that the rotary table works in the following way. Using pressured air and a foot controller, the round top rotates. Each time the foot controller is activated, the top round table rotates to the next round small support. There are 12 of these small round supports on top of the rotating table. We assume the machine operator put the material to be printed on each one of the 12 supports and then print them by moving the rotating table with the foot controller. As you can see in the pictures, underneath the table there is a motor and the air-assisted mechanism to move the rotating table. To use this mechanism, you may need ... moreto get new tubing and some of the air connections. The foot controller is not included, but you can get one in eBay for a few dollars. You may need to adapt this accessory to your machine. The accessory cannot be returned. Because of this, we sell it as"for parts" If you know what this accessory was used for, please, let us know. Please. Look at our o ther sell/auctions for Kwikprint machines. Foil-feeders, type sets, foil, precast dies and other Kwikprint accessories for sale. Buyer pays $ 60 for shipping in the 48 continental USA contiguous states. Buyer can pick up the machine accessory from us without any shipping/handling charges. THANK YOU VERY MUCH FOR BUYING FROM US AND PLEASE CHECK OUR AUCTIONS( CLICK HERE) BUY AND BID WITH CONFIDENCE. LOOK AT OUR FEEDBACK RATING( CLICK HERE) AND READ WHAT OUR SATISFIED COSTUMERS SAY ABOUT US. THANKS FOR LOOKING IF YOU HAVE ANY QUESTION. PLEASE ASK BEFORE YOU BUY. TERMS: For items that are guaranteed. The buyer has three days from receiving delivery to test them and contact us if they do not work as described. If the buyer continues using an item that he/she claims is damaged or faulty, the guarantee will be voided. If an ite
|
|
|
Haas HRT-160 4th Axis CNC Rotary Table Indexer air brake, manual 17 pin HRT-7 #2
Haas HRT-160 4th Axis CNC Rotary Table Indexer air brake. Manual 17 pin HRT-7
|
|
|
HA5C HAAS INDEXER 4TH AXIS ROTARY TABLE 5C 17 PIN CABLE CNC MILL LMSI **video**
HAAS HA5C 4 TH AXIS INDEXER( BRUSH TYPE. 17 PIN CONNECTION) HAS BEEN TESTED AND SERVICED PLEASE CHECK OUT THE YOUTUBE VIDEO LINK WHEN YOU SCROLL DOWN COMES WITH EVERYTHING YOU SEE IN PICTURES THIS UNIT IS A BRUSH TYPE LOT#10 IF YOU LIKE TO SEE MORE HAAS ROTARY TABLES PLEASE CLICK ON THE LINK UNDERNEATH( BELOW) HA5C SPINDLE S.A.E. METRIC Max Speed 0.001 to 410 °/sec 0.001 to 410 °/sec Max Torque 60 ft-lb 81 Nm Nose Thread 2 3/16- 10" Runout Max 0.0004" 0.010 mm Backlash 40 arc-sec 40 arc-sec Center Height 4.000 ± 0.001" 101.60 ± 0.03 mm Gear Ratio 60:1 60:1 Collet size std 5C 1/64- 1 1/16" std 5C 0.4- 27 mm INDEXING S.A.E. METRIC Max Rotation/Step 999.999 ° 999.999 ° Resolution 0.001 ° 0.001 ° Accuracy(±) 30 arc-sec 30 arc-sec Repeatability 10 arc-sec 10 arc-sec Worm Gear Dia ... more2.8" 71 mm GENERAL S.A.E. METRIC Power Requirement 115 VAC ±5% 10 A 115 VAC ±5% 10 A Air Pressure Max 120 psi 8.3 bar Operating Temp(max ambient) 100 °F 38 °C Duty Cycle(w/o tailstock) 75% full speed 75% full speed WEIGHT S.A.E. METRIC Rotary Head 48 lb 21.8 kg Brushless Control– Not Included 14.2 lb 6.4 kg Payments over $ 2.000 please contact us at 818-899-9000. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, 818 899-9001 or by e-mail. Combined shipping is available. Please click BUY IT NOW on the items you would like to purchase and allow us to adjust your shipping cost and then proceed with your payment. Will calls( local pick ups) are welcome between 8:00am to 4:00pm by appointment only. We c
|
|
|
ROTO-POWER PRECISION Precision Diamond Rotary Table/Chuck Tolerance +/- .00005
ROTO-POWER PRECISION Precision Diamond Rotary Table/Chuck Tolerance +/ 0.00005 Model No. 410V Serial No. RP4603 Table completely reworked- guaranteed accuracy RPM 0-100 Magnetic Chuck not included Table Diameter 10-1/2" Overall Length 23" US SHIPING VIA UPS GROUND TRANSPORTATION LOCAL Pick-Up Available PayPal Only. Please email Seller with any Questions.
|
|
|
20" SS Rotary Accumulator Table, Accumulation Conveyor, Sorting Packing Conveyor
20” SS Rotary Accumulator Table Accumulation Table Pack Off or Feed Table Adjustable Side Rail SS Legs with floor levelers Speed controller 110 Volt/ 60 HZ/ 1 Phase Recently removed from production Excellent Condition! For More information. Email CALL Kevin at(903) 355-1409
|
|
|
Vintage 2 In 1 Grater Model B, Clamp On Table Top Type, Complete, Rotary, Green
Vintage 2 In 1 Rotary Grater ~ Table Top Clamp On Type Model B ~ made in USA The grater is 12” tall and weighs 3 pounds. The grater is complete and in good working condition. It is free of rust or damage. There is a light green stain on the clamp screw and bale. The grater is embossed with 2 IN 1 GRATER. MADE IN U.S.A. and MODEL B. Shipping via economy or priority mail is available within the US. Echecks may be held for clearance. Completed PayPal payments ship the next business day. Visa/MC/Amex/Discover accepted through PayPal only. For shipment to a California address. 8.75% sales tax will be added. Questions? Please use the Ask A Question link.
|
|
|
Vintage Table Top Singer Rotary Pinker Painted Cast Iron Cutting Guide
Vintage Singer Table Top Rotary Pinker Painted Cast Iron With Cutting Guide Wood Handle 5" Tall Works Great surface soil no clamp light rust to unpainted metal I strive for Accurate. Honest Descriptions, telling the worst about an item, letting the buyer decide what they like best about the item. I keep my descriptions and photos simple and direct. No fancy backdrops or scenes to distract. No smoke and mirrors. I like things simple and honest. Thank you for checking out my auction. Please READ the following if you are planning on bidding or purchasing. Please DO NOT pay automatic PayPal or eBay invoice until I generate final shipping costs ~ actual USPS charges may be higher or lower. eBay estimates are rarely, if ever correct. Any overage of shipping charges will be refunded to your PayPal account. Please bid or purchase only if you ... moresincerely want the item. Please check shipping charges before bidding or making a purchase. I have absolutely NO control over postal rates and make NO money on shipping. Please check shipping rates before bidding or buying. Your item will always ship as inexpensively as a well packed item allows. Payment expected within 3 days unless other arrangements have been made prior to auction closes. I usually ship the next business day after receipt of payment, but shipping can be delayed for up to 3 days. Please note that USPS Parcel Post can take up to 10 business days for delivery. I am happy to combine shipping if you are bidding on more than one item. Be aware that this will not always save you money depending on package weight and size. I am happy to arrange a pickup with local buyers. Returns are accepted ONLY if the item has been misrepresented. I strive for customer satisfaction, so please contact me with questions before bidding. Please always contact me with concerns regarding your purchase prior to leaving neutral or negative feedback. My merchandise is obtained from various sources once or twice removed from the original owner, including my own personal collections and beca
|
|
|
Peterson Drill press Gear head Leitz Rotary Table
Excellent like new condition no-3 mt.Lever-wheel feed option,swivel head,depth stop etc.optical rotary table Leitz ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b7e89a715-0x103-
|
|
|
9" 3-JAW LATHE CHUCK w/ CUSTOM MOUNT FOR BRIDGEPORT 12" ROTARY TABLE KH314 KEY
9" 3-JAW CHUCK w/ CUSTOM MOUNT FOR BRIDGEPORT 12" ROTARY TABLE KH314 w/KEY Mounting spud is 1" in Dia. X 0.91" tall Outside diameter of plate mount is 12" Plate thickness is 1/2" Has 4 machined notches to mount plate to rotary table Comes with key 2-1/2" Hole- Hole does NOT go through the plate This unit has been tested and fitted to a 12" BRIDGEPORT rotary table. We guarantee it fits. OWN A PIECE OF HISTORY! THIS ITEM WAS ORIGINALLY OWNED AND USED BY MASTER CRAFTSMAN CAL WILLIAMSON OF EL CAJON. CALIFORNIA. MR.WILLIAMSON WAS RESPONSIBLE FOR THE ORIGINAL SRAM BICYCLE GRIPSHIFT PROTOTYPE DESIGN THAT HAS BECOME THE STANDARD ON TODAYS BICYCLES. MR.WILLIAMSON CONTRIBUTED HIS EXPERTISE TO MANY EXCITING PROJECTS OVER THE YEARS INCLUDING FABRICATING ENGINES. BOATS, CARS, BICYCLES, AIR PLANES, AND MUCH MORE! ... moreIF YOU HAVE QUESTIONS ON THIS ITEM OR HAVE A SPECIFIC NEED FOR A MACHINE OR MACHINE TOOL ACCESSORY. PLEASE CALL US AT 858-754-8321. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b7e8b0605-0x115-
|
|
|
Fibro Fibrotakt Rotary Indexing Table Gear Reducer 11.11.2.11.4.11.21.4.0072
Fibrotakt Rotary Indexing Indexer Table Gear Reducer 11.11.2.11.4.11.21.4.0072 THIS ITEM IS USED. BUT IN GOOD CONDITION. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 12" LENGTH: 19" HEIGHT: 8" WEIGHT: 170 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR ELECTRICAL SURPLUS(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT ... moreSHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN OR A MESSAGE THROUGH EBAY WITH ANY QUESTIO
|
|
|
CNC heavy duty milling machine MK cnc express model # 999-6500-000 rotary table
CNC heavy duty milling machine MK cnc express model# 999-6500-000 rotary table buyer is responsible for shipping we can palletize per your specifications
|
|
|
CAST IRON 9 " ROTARY TABLE ,, VINTAGE NO CRANK TYPE. GOOD STARTING TABLE
THIS IS A USED-CAST IRON- 9" ROTARY TABLE. THIS IS A VINTAGE TYPE WITH NO CRANK. TO TURN YOU INSERT A BAR IN THE HOLES AND ROTATE BY HAND. GOOD STARTING TABLE. 360 DEGREE GRADUATIONS ON TABLE AND GOOD LOCKING. IN GOOD CONDITION.WELL MADE. I WILL COMBIND SHIPPING. PLEASE WAIT FOR INVOICE FOR BEST SHIPPING PRICE. SEE PICS. ASK QUESTIONS.
|
|
|
Erickson Power Rotary Table model 544 600
12" Erickson power rotary table Air operated Model 544-600 Horizontal/ Vertical Indexing Unit Mounting Plate(To mount chuck) 12" Plate Approx 6-3/8" Approx Center Height in Horizontal Machine 8-3/8" From Base to top of Mounting Plate in Vertical Position 2" Hole thru Center of Indexer Approx 6-1/2" x 8" Base Mounting Area for Horizontal Use Unit appears to be in good condition. will ship on a skid 24" x 24" Weight: 170 Lbs. any Q's call Marc 908-236-9005 will ship or welcome pick up
|
|
|
4" TOSHIBA Table Type Boring Mill, 1972, rotary table, #50 taper, DRO
ONE USED- 4” TOSHIBA Table Type Horizontal Boring Mill Model: BT10AR Serial Number: 6360 New 1972 48” Vertical Travel of Headstock 55” Table Cross Travel 44” x 49” Built In Rotary Table#50 Taper Spindle w/Power Draw Bar Spindle Speeds from 20 to 1000 RPM Hardways Built In Outriggers Rails 3 Axis Digital Readout Pendant Control 11kw 380 Volt Electrics Machine is offered subject to prior sale and strictly subject to acceptance to the terms and conditions as stated on Belmont Machinery Company's Invoice. We reserve the right to correct any typographical errors. Please note that these are approximate specifications only and that we advise that you personally inspect this machine to confirm the information provided. Seller will load the machine onto buyers truck F.O.B Aurora. IL. Buyer is responsible for all freight charges. Questions call ... moreBelmont Machinery Company at 630-844-9288 or email sales@belmontmachinery Please contact us before paying in full.
|
|
|
Antique 19c German Bean Vegetable Rotary Blade Slicer Table Clamp Gesetzlich
Antique 19c German Bean/ Vegetable Rotary Blade Slicer Table Clamp/ Marked Gesetzlich Geschutzt Very Good Condition. Could Use A Cleaning, Works Fine, Approx 6x7x3" Wgt 3 lbs.
|
|
|
2006 Haas TM-1P VMC with Haas HRT-160 Rotary Table, Tooling and More!
2006 Haas TM-1P Vertical Machining Center. Travels 30 x 12 x 16 10 ATC 6.000 RPM- 7.5 HP Cat 40 Haas Control 4th Drive& Wiring Rigid tap Chip Auger Macros Spindle Orientation Coordinate Rotation& Scaling Intuitive Programming System High Flow Coolant Pump Kit Programmable Coolant Nozzle Floppy Drive. Haas HRT-160 Rotary Table with Haas Tooling Block System(12” Misc. Tooling Included. Electrics: 240V Single Phase or 208V 3 Phase. Approx. Spindle Hours: 1234 Have questions or need info. Call George at 602-625-6419. You can also email at george@rockfishmachinery.com
|
|
|
YUASA UDNC 500 Programmable Indexer with YUSA EUDX- 400 Rotary Table
You are buying 1 used working. Great condition YUASA UDNC 500 Programmable INDEXER with YUSA EUDX- 400 Rotary Table The original manual comes with the product. This item was not used a lot in the Research and Development lab. The programmable indexer looks unused. 14 day warranty Email us fro great shipping rates. loc: floor
|
|
|
Tail Stock Centers 3-1/8" Center Height For Rotary Table Milling Dividing Head
Rotary Tail Stock Centers 3-1/8" Center Height For Rotary Table or Milling Machine or Dividing Head. A440. Specifications: Base Mount Width: 4" Center Height: 3-1/8" Spindle Diameter: 3/4" Overall Dimensions: 4-1/4" x 4" x 3-3/4" Comes as shown in pictures. NO INTERNATIONAL SHIPPING.
|
|
|
Tail Stock Centers 3-1/2" Center Height For Rotary Table Milling Dividing Head
Rotary Tail Stock Centers 3-1/2" Center Height For Rotary Table or Milling Machine or Dividing head. A440. Specifications: Base Mount Width: 3-1/2" Center Height: 3-1/2" Spindle Diameter: 7/8" Overall Dimensions: 5-3/4" x 3-1/2" x 4" Comes as shown in pictures. NO INTERNATIONAL SHIPPING.
|
|
|
Rotary Tail Stock Centers 3-3/4" Center Height For Rotary Table or Milling Mach
Specifications: Base Mount Width: 2.5" Center Height: 3-3/4" Spindle Diameter: 5" Overall Dimensions: 5-14" x 2.5" x 4.5" Comes as shown in pictures. NO INTERNATIONAL SHIPPING.
|
|
|
SMC MSQB20R Pneumatic Cylinder Rotary Actuator Table w/2 D-F9P Sensors
Questions? Call us: 1-877-328-9236. SMC MSQB20R Pneumatic Cylinder Rotary Actuator Table w/2 D-F9P Sensors. Manufacturer: SMC Model: MSQB20R Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: SMC Condition: Used. Comes in non original packaging. Unit is in good cosmetic condition with minor scratches from prior use. Notes: Unit was removed from a working manufacturing setup. No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) SMC MSQB20R Pneumatic Rotary Actuator Table, 2) SMC D-F9P Sensors, 2) SMC RBA1006-X692 Shock Absorbers, Specifications: Manufacturer: SMC, Model: MSQB20R, Pneumatic Rotary Actuator Table, Max. Pressure: 0.6 MPa. 6.1 Kgf/cm, PSI: 87, 2- D-F9P Reed Sensors, 2- RBA1006-X692 Shock Absorbers, SKU: O40Y019 For ... morequestions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Buyer pays for all shipping costs. This cost includes professional packing& insurance. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local
|
|
|
MOORE JIG GRINDER RIGHT ANGLE ROTARY TABLE MOUNT
MOORE JIG GRINDER RIGHT ANGLE ROTARY TABLE MOUNT shelf a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14b8a887309-0x118-
|
|
|
10 inch - T-Slot Round table for rotary table or face plate or any other use
10" circular disk or table which can be used to enlarge a rotary table or attached to a smaller face plate for either milling or turning purposes. Looks to be abt 15/16 inches thick- nice pieces with infinite potential uses. it is used so selling it as is& buyer agrees to pay all shipping cost. i.e. west coast or etc] included shipping at flat rate USPS at listeded price. Lower 48 states- appears to be steel- but could be cast iron. pictures tells the story of this useful item.
|
|
|
FTW RUCKLE NC TG 100 4" 4TH AXIS ROTARY TABLE
FTW RUCKLE NC TG 100 4" 4TH AXIS ROTARY TABLE. SERIAL NUMBER 7719130/3125 GENERAL SPECIFICATIONS: Table diameter 4" Center height 5" Speed 35 RPM(2 available) Was being used on a Chiron VMC* Visit our website at: to view digital photographs of this machine. ALL SPECIFICATIONS SUBJECT TO VERIFICATION. Visit our web site at: to view Terms and Conditions of Sale for this machine.
|
|
|
HAAS 5C CONTROL BOX 7 PIN CNC MILL ROTARY TABLE 5C INDEXER WITH OPERATOR MANUAL
USED HAAS 5C COLLET INDEXER. WORKS GOOD. SEALED FOR WET OPERATION.
|
|
|
Nikken CNC-200FA Rotary Table With Fanuc Servo A06B-0313-B001 #7000
NIKKEN CNC-200FA ROTARY TABLE With FANUC SERVO A06B-0313-B001#7000 WITH 30 DAY WARRANTY 8 INCH This unit has been inspected. Cleaned, tested and checked completely. With Fanuc servo motor model 0-S. A06B-0313-B001-7000 motor, 2000 pulse incremental for Fanuc Ac systems, please e-mail your control type to verify correct model. We have other tables in stock. Comes with 30 day parts warranty. Warranty will not cover damage from spindle crashes from misuse. Local pick-up or request a freight quote by truck. We tested it and ran it. Runs smooth without back lash, like new condition mechanically. We have 2 units like this for sale. And these are actual pictures with serial number is 2648 Major credit cards are accepted. For technical questions or credit card payments call Brent 847-910-4961. Brent/kb 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b8f4808d5-0x107-
|
|
 |