|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: China 5# Milling Machine Universal. Suitable for most milling machines. Due to the difference between different monitors, the picture may not reflect the actual ... morecolor of the item. pls make sure you do not mind before you buy.
Buy It Now
Free Shipping Condition: New Location: China For Milling Machine. Model :9 teeth. Revolving Handle.
Buy It Now
Free Shipping Condition: New Location: China Material： Bronze.
Buy It Now
$3.00 Shipping Condition: New Location: Chino, United States Mill Machine Parts R8 Spindle + Bearings Assembly Fit BRIDGEPORT Milling US Product description: This product is a high quality R8 spindle + bearing for ... more3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Product specifications: Name: Milling R8 spindle + bearing Total length of the spindle: 545mm Head outer diameter: 46mm Spline outer diameter: 25mm D:25mm D1:20mm B:6mm Bearing position: 35mm and 30mm Packing size: 56*10*10cm Weight: 4.2kg Scope of application: Most milling machines (3#4# milling machine) The package includes: 1X R8 spindle + bearing.
Buy It Now
$8.70 Shipping Condition: New – Open box Location: Fontana, United States SECO 1" Indexable Milling cutter 1" Weldon Shank R217.69-01.00-3-16.
Buy It Now
Free Shipping Condition: New Location: China Milling machine head automatic feed bracket assembly. Suitable for: 3# turret milling machine. Feeding gear off the slider group. Before you open a case. ... moreIt would also help you on your decision.
Buy It Now
$1.00 Shipping Condition: New Location: Rowland Heights, United States Applicable machine tools: Bench drills, milling machines, etc. Material: 6542 HSS. Applicable materials: iron, stainless steel, copper, aluminium, etc. ... moreShank: Round shank.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Widely used in small processing machinery such as grinding machines, milling machines, drilling machines, lathes, etc. Uses: Suitable for ... moresmall processing machinery (such as lathes, milling machines, grinders).
Buy It Now
Free Shipping Condition: New Location: China Suitable for most milling machines. Before you open a case.
Buy It Now
$2.00 Shipping Condition: New Location: Austell, United States 3 Phase Milling Machine Switch Forward and Reverse for Milling Machine Parts! ★ This Is a High-quality Three-phase Motor Milling Switch for Milling Machine ... moreParts. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High-quality 92mm Gear and Wheel Alsgs, Suitable for the Milling Machine Parts of the Al-310s Servo Power Feed Model. Features: ... moreModel: Al-310s Outer Diameter: 92mm Inner Hole: 8mm Thickness: 16.5mm Gross Weight: 0.17kg Net Weight: 0.1kg.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality X/Y Axis Dial Bracket Lift Mount for Lock Nut Mounting C86+88, Durable and Easy to Replace. The Package Includes: ... more1x X/Y Axis Dial Bracket Lifting Mount Features: Material: Iron Packing Size: 7.5*5*5cm Gross Weight: 0.21kg Net Weight: 0.1kg.
Buy It Now
Free Shipping Condition: New Location: China Milling Machine Part 45°+ 90° Degree Angle Plate Part For Bridgeport Mill New. Color ：Silver. Model : photo. Before you open a case. Size ：As the picture ... moreshows.
Buy It Now
Free Shipping Condition: New Location: China Model ：7207DB P5. Suitable for R8 spindle. Suitable for Most Milling machines. Mainly Applicable to 3# And 4# Turret Milling Machines.
Buy It Now
Free Shipping Condition: New Location: China For milling machine Step Pulley J Style Heads. Suit for Most Milling Machine.
Buy It Now
Free Shipping Condition: New Location: China Modle: A19 Belt Pulley.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the ... moremilling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Specifications: Name: Milling R8 Spindle + Bearing Total Length of the Spindle: 545mm Head Outer Diameter: 46mm Spline Outer Diameter: 25mm D:25mm ... moreD1:20mm B:6mm Bearing Position: 35mm and 30mm Packing Size: 56*10*10cm Weight: 4.2kg Scope of Application: Most Milling Machines (3#4# Milling Machine).
Buy It Now
$6.00 Shipping Condition: New Location: Chino, United States The composite pressing plate is a fixed casting machine accessory for formwork, jig and plate. Wide range of use, machine tools, molds, lathes, CNC and ... moreall kinds of metal cutting machine tools clamping, fixed workpiece, its clamping force is large, easy to use, safe and reliable. Features: -Saves time when setting your job on the milling machine -Large clamping force, simple structure and easy to use. -It is mainly used for locking general milling machine processing, CNC processing and various metal processing parts.
Buy It Now
Free Shipping Condition: New Location: Hanahan, United States Included Components Tilting Milling Table. Tilting Range: 0-40degree (both sides). 1 x Titling Milling Table. It can be locked at any angle with the help ... moreof screws at each end. 1 x Cleaning Brush. Adjustable Angle Plate: With a crank handle, you can adjust the angle as you need.
Buy It Now
$2.99 Shipping Condition: New Location: China NT30 B133 spindle front cover Mill tool.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High-quality 92mm Gear and Wheel Alsgs, Suitable for the Milling Machine Parts of the Al-310s Servo Power Feed Model. Features: ... moreModel: Al-310s Outer Diameter: 92mm Inner Hole: 8mm Thickness: 16.5mm Gross Weight: 0.17kg Net Weight: 0.1kg The Package Includes: 1x Gears and Wheels.
Buy It Now
$2.99 Shipping Condition: New Location: China Specification: ER20. 65 manganese steel material, not easy to deform, high hardness.
Buy It Now
Free Shipping Condition: New Location: China Suitable for most milling machines. Will fit Acer, Bridgeport, and most other Taiwanese import mills. Height: 30mm. Your clock spring housing must have ... morea slit for spring to fit. Height: 25mm. This clock spring will not fit if there is a pin in the housing.
Buy It Now
Free Shipping Condition: New Location: China Note:Each Milling machine need three this type Handle.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Product Description: ★This Is a High-quality Three-phase Motor Milling Switch for Milling Machine Parts. ★Machine Switch, Beautiful Appearance, Three-dimensional ... moreSurface. ★Long Service Life of the Switch, This Product Is Suitable for Ac 50-60hz; Voltage Is 690v and Below or Dc 440v and Below. ★with Intelligent Circuit Matching and Advanced Technology, It Is Suitable for Most Milling Machines and Machine Tools. Features: Type: Three-stage Switch Material: Plastic + Metal Product Size (See Drawings for Details): 64*64*61mm Gross Weight: 0.2kg Net Weight: 0.1kg Packing Size: 12*7*6cm The Package Includes: 1x Switch Note: Due to Manual Measurement, Please Allow a Difference of 1-3cm. .
Buy It Now
$7.00 Shipping Condition: New Location: Chino, United States Model: AL-310S Outer diameter: 92mm Inner hole: 8mm Thickness: 16.5mm Gross weight: 0.17kg Net weight: 0.1kg.
Buy It Now
$54.57 Shipping Condition: Used Location: Leavenworth, United States 50 NMTB Taper shank possible SKU T0816. 50 Taper Horizontal Milling Machine arbor 1-1/4x12. Stamped on upper arbor is "511/4B31/2 POLAND".
Buy It Now
Free Shipping Condition: New Location: China Fits models: ASONG/ AS-235. Part #: YP-K06.
Buy It Now
Free Shipping Condition: New Location: China Suitable for most milling machines. Total length: 237MM. Model: B166. Color ：Silver. Number of gears: 16.
Buy It Now
$4.00 Shipping Condition: New Location: Chino, United States NOTES :this product doesn't come with bearings Description: Suitable for most bridge and vertical milling machines Model: R8 Total length: 540mm After ... morechanging the main shaft, the working effect is restored more smoothly than before Installation steps: * Spindle dust cover first * Bearings are matched * Put on bearings and spacer rings * Put on another pair of bearings * Set of sun tablets *fasten the screw nut * Put on 6206 bearing and snap on the retaining ring Note: This installation step only provides the reference for the installer, and cannot be used as a basis for accuracy. If you need to achieve a certain accuracy, you need to ask a professional to install and debug. Packing list: 1 * Milling Shaft.
Buy It Now
Free Shipping Condition: New Location: China Modle：B132. After the spindle is replaced, the work effect is as new.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Milling Machine Lifting Crank Specifications: 9 Teeth. 1x Milling Machine Lifting Crank. Your satis faction is our ultimate goal. Product Material: High ... moreQuality Alloy.
Buy It Now
Free Shipping Condition: New Location: United States Product description: ★This is a high-quality three-phase motor milling switch for milling machine parts. ★Machine switch, beautiful appearance, three-dimensional ... moresurface. ★Long service life of the switch, this product is suitable for AC 50-60HZ; voltage is 690V and below or DC 440V and below. ★With intelligent circuit matching and advanced technology, it is suitable for most milling machines and machine tools. Features: Type: Three-stage switch Material: Plastic + Metal Product size (see drawings for details): 64*64*61mm Gross weight: 0.2KG Net weight: 0.1kg Packing size: 12*7*6CM The package includes: 1X switch note: Due to manual measurement, please allow a difference of 1-3cm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description: This Is A High-Quality A49 Milling Machine Motor Belt Gear, Made Of Aluminum Alloy, Durable, Very Suitable For Your Milling Machine. ... moreFeatures: Color: Silver Model: A49 Material: Aluminum Alloy Inner Diameter: 22mm/0.86" Keyway Width: 7mm/0.27" Outer Diameter: 178mm/7" Thickness: 64mm/2.5" Use An A-33 Belt. Size: 17.8*17.8*6.4cm/7*7*2.5inch Packing Size: 19.5*19.5*9cm/7.7*7.7*3.5inch Gross Weight: 0.98kg Net Weight: 0.7kg The Package Includes: 1x A49 Milling Machine Motor Belt Gear.
Buy It Now
Free Shipping Condition: New Location: United States Total length: 540mm. Mill Part Milling Machine Parts R8 Spindle CNC Milling. Suitable for most vertical milling machines. 1 Milling Shaft. Spindle dust ... morecover first. fasten the screw nut. Put on 6206 bearing and snap on the retaining ring.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Color: Silver material: metal Packing size: 18.3*15*7.6cm Package weight: 0.7kg Description: Milling machine accessories clutch ring Milling ... moremachine M3/M4 accessories Milling machine slow gear clutch Suitable for most milling machines The package includes: 1X milling machine slow gear clutch.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description: This Is A High-Quality A49 Milling Machine Motor Belt Gear, Made Of Aluminum Alloy, Durable, Very Suitable For Your Milling Machine. ... moreFeatures: Color: Silver Model: A49 Material: Aluminum Alloy Inner Diameter: 22mm/0.86" Keyway Width: 7mm/0.27" Outer Diameter: 178mm/7" Thickness: 64mm/2.5" Use An A-33 Belt. Size: 17.8*17.8*6.4cm/7*7*2.5inch Packing Size: 19.5*19.5*9cm/7.7*7.7*3.5inch Gross Weight: 0.98kg Net Weight: 0.7kg The Package Includes: 1x A49 Milling Machine Motor Belt Gear.
Buy It Now
Free Shipping Condition: New Location: China Model ：7207DB + 6206. Suitable for R8 spindle. Suitable for most Taiwan milling machines. The oil seal color on the bearing is random.
Buy It Now
$300.00 Shipping Condition: New Location: Leipzig, Germany Use one hand to hold the center transmission shaft. Set the bevel gear on axis screw with the other hand. Then check if the backlash between gears is ... morebetween 0.1-0.2mm. Tighten the handle to start setting socket parallel key and bevel gear.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Specification: Color: silver Packing size: 26*5*4cm Package weight: 0.97kg Product material: high quality alloy Milling machine lifting crank specifications: ... more9 teeth Inner diameter: 27.5mm Inner hole: 16mm Outer diameter: 39.5mm Product features: flexible, durable, smooth and smooth, zinc alloy is tougher, flexible and easy to use, smooth and smooth, not stable. It has good mechanical properties at room temperature and high wear resistance. The package includes: 1X milling machine lifting crank.
Buy It Now
Free Shipping Condition: New Location: United States Product Description: This Is a High Quality R8 Mill Pull Rod 7/16 Vertical Mill Shank 600mm, Durable And Perfect For Most Milling Machines. Features: ... moreMaterial: Iron Size: 7/16 Packing Size: 2.5*2.5*60cm Gross Weight: 0.8kg Net Weight: 0.5kg The Package Includes: 1Xr8 Milling Machine Pull Rod NOTE: Our product does not come with M12 heads. Please carefully check before purchasing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This Is a High Quality R8 Mill Pull Rod 7/16 Vertical Mill Shank 600mm, Durable And Perfect For Most Milling Machines. 1Xr8 Milling Machine Pull Rod. ... moreGross Weight: 0.8kg. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description: This Is A High-Quality A49 Milling Machine Motor Belt Gear, Made Of Aluminum Alloy, Durable, Very Suitable For Your Milling Machine. ... moreFeatures: Color: Silver Model: A49 Material: Aluminum Alloy Inner Diameter: 22mm/0.86" Keyway Width: 7mm/0.27" Outer Diameter: 178mm/7" Thickness: 64mm/2.5" Use An A-33 Belt. Size: 17.8*17.8*6.4cm/7*7*2.5inch Packing Size: 19.5*19.5*9cm/7.7*7.7*3.5inch Gross Weight: 0.98kg Net Weight: 0.7kg The Package Includes: 1x A49 Milling Machine Motor Belt Gear.
Buy It Now
Free Shipping Condition: New Location: China Can fit Bridgeport, Acer, and Taiwanese all machines. Material: rubber +Cloth. Back Rubber Pad Size :500 650mm.
Buy It Now
Free Shipping Condition: New Location: China Continuously updating all aspects of hardware and tool products.
Buy It Now
$18.99 Shipping Condition: New Location: China Milling Machine Part- Forward Reverse Switch for 2-SPEED MOTOR(High/ Low) Forward High/ Stop/ Reverse High/ Forward Low/ Stop/ Reverse Low Switch Can ... morefit EISEN step pulley milling machine with 2-speed motor(S-2M 16-speed) and similar milling machines from Taiwan with 3-phase. 2-speed motor ITH thermal rating: 25A AC1 rating: 20A If you have any questions regarding this item. Please let us know we'll be happy to help. S-2M-FRS-SW-HI LOW_gsrx_vers_526(GS 6.6.6(526) Dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144aa52c207-0x107-
Buy It Now
Free Shipping Condition: New Location: Chino, United States Model: B177 + B178. 1pc / Set (B177 + B178). Spring height: 25mm. If there are pins in the housing, the clock spring cannot be installed.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 7/16 Thread Milling Machine Part R8 Draw Bar Overall Drawbar Fit Bridgeport Mill. This Is a High Quality R8 Mill Pull Rod 7/16 Vertical Mill Shank 600mm, ... moreDurable And Perfect For Most Milling Machines.
Buy It Now
Free Shipping Condition: New Location: China Feed Scale Screw. 1 Stop Knob. Length: About 210mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 8" Lathe Lighting Work Light 8W Bench LED Lamp For CNC Milling Lathe Grinder. Color temperature: 6000K white light. Light brightness: 120 LM / W. Easy ... moreto use switch setting on the lamp head side. Light source: LED.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Milling machine accessories clutch ring. Milling machine slow gear clutch. Milling machine M3/M4 accessories. 1X milling machine slow gear clutch. Suitable ... morefor most milling machines. Your satis faction is our ultimate goal.
Buy It Now
$59.61 Shipping Condition: New Location: Sylmar, United States Have 2 available, asking 150.00 each new condition,, ready to be used.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China The working length of KA300 linear scale does not match the appearance length, working length + 106mm = total length. For use, the KA300 linear scale, ... morethe principle of 45°, is more suitable for use in various types of machine tools.
Buy It Now
Free Shipping Condition: New Location: China 1 x Milling Cutter(2mm) 1 x Milling Cutter(2.5mm) 1 x Milling Cutter(3mm) 1 x Milling Cutter(4mm) 1 x Milling Cutter(5mm) 1 x Milling Cutter(6mm) 1 x ... moreMilling Cutter(7mm) 1 x Milling Cutter(8mm) 1 x Milling Cutter(9mm) 1 x Milling Cutter(10mm).
Buy It Now
$21.50 Shipping Condition: New Location: Broadview Heights, United States OEM 2190055. SPINDLE PULLEY.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 25mm Clock spring + Steel Shell For Milling Machine Housing Replacement Product Description: This is a high-quality milling machine parts suitable for ... moremost milling machines, 25mm clock spring + steel shell, can be a good replacement for your broken parts. Features: Spring height: 25mm Inner diameter of spring seat: 45mm Thickness: 0.7 mm Material: high quality metal Model: B177 + B178 The package includes: 2pcs / Set (B177 + B178) note: If there are pins in the housing, the clock spring cannot be installed. Please note that spring bounce may cause damage. It is best if the spring is pressed into the housing.
Buy It Now
Free Shipping Condition: New Location: China Model ：B104 + B105. Suitable for most milling machines. Color ：Black.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The composite pressing plate is a fixed casting machine accessory for formwork, jig and plate. Wide range of use, machine tools, molds, lathes, CNC and ... moreall kinds of metal cutting machine tools clamping, fixed workpiece, its clamping force is large, easy to use, safe and reliable. Features: -Saves time when setting your job on the milling machine -Large clamping force, simple structure and easy to use. -It is mainly used for locking general milling machine processing, CNC processing and various metal processing parts. Package included: 24 x Studs (lengths are 3,4,5, 6,7,8-inch all four.) 6 x T-slot Nuts 6 x Flange Nuts 4 x Coupling Nuts 6 x Step Clamps (step-pressure gauge) 12 x Step Blocks (triangular horn) 1 x Plastic Bracket.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Product Is a High Quality R8 Spindle + Bearing for 3#4# Milling Machine. After the Spindle Is Replaced, It Can Change the Surface or Side of the ... moreMilling Workpiece Caused by the Tool Wear Caused by the Long Wear of the Spindle and the Bearing Clearance.
|
|
|
|
AUSTRA Milling Machine NT40 40 INT to MTS 3 Morse adapter 5/8" BSW A101101.0O3
AUSTRA Milling Machine NT40 40 INT to MTS 3 Morse a d apt e r 5/8" BSW drawbar A101101.0O3 We are in the process of listing a large QTY of 40 INT tooling. Go to a store view and you can search our stock. Please call Tim 0419 363 992 with any questions or email Please check out my other listings and get in touch if you are after something specific I have a huge number of pneumatic cylinders of various sizes in stock that will be listed as I find time. You are welcome to inspect our stock at 76 Orsmond Street Hindmarsh. SA 5007; please call mobile ahead of visit.
|
|
|
10MM COLLET SPINDLE DRILL PRESS MILLING MACHINE LATHE 10 MILLIMETER COLLETS
10MM COLLET SPINDLE UNKNOWN MANUFACTURER COLLET IN SPINDLE APPEARS TO BE 10MM BUT UNABLE TO REMOVE IT TO CHECK DIMENSIONS: MAIN BODY 2.200" DIAMETER OF KNURLED RING THAT SCREWS OFF 3.070" BACK END OR SHANK 1.100" NOT ABLE TO IDENTIFY. MAYBE A DRILL PRESS SPINDLE? APPEARS IN NICE CONDITION. PROBABLY EURO MADE, NICE PIECE SOLD AS-IS. ASK QUESTIONS BEFORE BIDDING $13.00 S&H USPS PRIORITY MAIL 5 DAY AUCTION!
|
|
|
bridgeport milling machine face fly surface cutter
Milling machine surface fly face cutter not sure what to call it has 3 cutting bits with it can put 6 in it about 4" in diameter and shaft is 1" please ask all questions before bidding as i do not know specifics on this all sales final. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-145c541a07d-0x109-
|
|
|
Used CNC Systems Milling Machine Sharnoa (Add your own electronics) PICKUP ONLY
Add your own electronics. 2 nema 42 servos included. Spindle and spindle motor Included Brand: Sharnoa Model: SD 850/3 Year: 1984 CNC Milling Machine Description: used Power: 220V 3ph year 1983 Recommended electronics: 3 Axis Nema 42 stepper motor 3256 oz.in CNC Mill http:www.ebay.com/itm/like/280608626580?lpid=82 Software recommended: Mach 3 CNC Software. PICK UP ONLY Estimated Weight: 5000lbs. A forklift will be needed to pick up. This is a very large machine.
|
|
|
Milwaukee K & T #2CHL Horizontal Milling Machine with Rare Universal Table swive
Rare Milwaukee K& T#2CHL Horizontal Milling Machine with Universal Table( swivels) 10" X 46" Table with 3 Axis feeds. Arbor and Arbor support, Dial Type Speed Changes from 25- 1500 RPM, 3 HP Motor, runs on 3 Phase Electric, Nice condition, Needs cleaning and oiling, Built to last a lifetime. Selling as You see it. Free loading on Buyers Truck from Pa zip code 18966, Buyer pays all shipping costs.
|
|
|
Machinist 1-2-3 blocks,Milling machine,lathe,drill press
Precision set.Nice shape,Nice quality
|
|
|
Jeweled Machinist V blocks,Parallel blocks,milling machine,lathe,drill press
Very nice shape.Great quality
|
|
|
Maxi Torque Pneumatic Power Air Drawbar for Milling Machine complete Assy
Maxi Torque Pneumatic Power Air Drawbar for Milling Machine. Used in very good condition, complete assembly with pneumatic regulator
|
|
|
HORIZONTAL 4 1/2" ROTARY TABLE MACHINIST MILLING MACHINE TOOL
Preowned HORIZONTAL 4 1/2" ROTARY TABLE MACHINIST MILLING MACHINE TOOL in good working condition. You will receive the item you see here.
|
|
|
Hardinge #10 Collet 3/16" Screw Machine Lathe Mill Milling
This auction is for a Hardinge#10 Collet 3/16" We are in the process of eliminating inventory of screw machine parts. These are all out of an old cam-driven Tsugami that at one time was converted to accept the Hardinge parts( Thanks for looking and good luck.
|
|
|
BILZ WES 2 B 3/8 CLUTCH DRIVE RACHET TAP COLLET FOR CNC MILLING MACHINE SHOP
USED/ WORKING BILZ CLUTCH DRIVE RACHET TAP COLLET 2 B 3/4" 16902B Clutch drive automatically stops spinning if tap reaches bottom of hole preventing broken taps. SHIPPING DETAILS- WORLDWIDE SHIPPING AVAILABLE Shipping is calculated by ebay/ Canada post see shipping details at top. CHECK OUT OUR EBAY STORE BY CLICKING THE LINK BELOW Powered by
|
|
|
Used Glacern Machine Tools GDV-620FE CNC Milling Machine Double Vise (DL640)
Have had these just over a year in my one man shop. They work fine have some coolant stains and one has a jaw messed up from an end mill crash but it's just cosmetic it works fine. The others are almost like new. Just got a new cnc and decided to upgrade to kurt. This auction is for one but three are available.
|
|
|
Reed Prentice Corp. Milling Machine
The Reed Prentice No 2 Vertical Milling machine was manufactured in Worcester Mass. It is located in Worcester Mass at a factory which is 158 years old. Pick up is free. All shipping is buyers cost.
|
|
|
Fagor NV/K 20-2 axis counter for Milling or Lathe machine- MKT-TMT-CT-NCT-MT-FT
Used Fagor NV- NVK20. 2 axis display with SUD-D9& Round 7pin connector(TS and EC fagor cable) ONLY USD199 + USD60 shipping and it come with 6 month warranty. Please feel free to contact me if you need more info.
|
|
|
George Gorton Milling Machine Collets, Batch, NR, PENNY
We ALWAYS post feedback. Call us if you have any questions or problems at 413-743-0780. PLEASE do not post low feedback or low DSR ratings UNTIL you have talked to us about any problems you may have. As we always want happy customers! We strive for 5 star DSR's as well as happy buyers. Help us make that work! THANK YOU!
|
|
|
Collet Toolholder Holder CNC Machine Tool Collar Milling Machine Shank Chuck USE
Please read this entire listing before purchasing this unit. you will get both pieces. I don't know brand or anything really about this collet but my lack of knowledge is your gain. Look at the pics because this is the piece you will get. I bought this piece in an auction so you are purchasing AS-IS since I don't know anything about it.
|
|
|
9” x 48” Bridgeport Vertical Milling Machine, Model Series I, DRO/Feed
9” x 48” Bridgeport Vertical Milling Machine. Model Series I, S/N 250465 Machine Specs: Table Size 9” x 48” Travels Long 30” Cross 12” Quill 5” Knee 16” Spindle HP 2 HP 220 volt 3 Phase Spindle Taper R-8 Spindle Speeds 60- 4250 RPM Spindle Feeds.003. 006 and.009 Machine Weight 2000 LBS Equipped With: 2 Axis Accurite DRO Servo model 150 Power Feed Chrome ways Bijur Lube 2 HP Variable Speed Milling Head Very Good Condition Inspect Under Power in our Branchburg NJ Warehouse Questions Call Dave@ 908-399-8133
|
|
|
8" Rotary Table Machinist Tools Milling Machine Drill Press
8" Rotary Table. Made USA, Palmgren, good condition, controls all work, table rotates properly, very well made, has signs of normal use and wear(see photos) weighs 34 lbs. PLEASE READ ALL TERMS AND CONDITIONS BELOW. AND ASK ALL QUESTIONS BEFORE YOU BID" 1) USA BIDDERS ONLY" NO EXCEPTIONS" 2) PAYMENT: Payment due within 3 days" Pay Pal 3) SHIPPING: Except for Flat Rate Priority. All other shipping rates quoted are for the US mainland 48 States only, all others email me for a shipping quote, REMEMBER USA BIDDERS ONLY! 4) COMBINED SHIPPING: We will combine shipping. And do our best to give you the very cheapest rate possible. 5) Delivery Conformation. Is included with every shipped package. 6) Read item description completly. Look closely at all the photographs, Be sure this item is what you want, and be sure to Ask ... moreAll Questions Before You Bid, Please Use Good Judgment and Bid Accordingly! 7) All Items are Sold in AS IS CONDITION. Please Use Good Judgment and Bid Accordingly! 8) Item Description: I try my best to describe accurately all the good and bad of each item. Ask all questions before you bid! 9) GUARANTEE: I guarantee all items to be as pictured. And described! PLEASE CONTACT ME FOR ANY REASON. I ANSWER ALL EMAILS!
|
|
|
Cincinnati No. 8 Plain Automatic Milling Machine Service Manual and Parts List
Service Manual and Parts List for Cincinnati No. 0-8 Plain Automatic Milling Machine Model OL Good condition. See photos. Cover is dirty. But interior pages are cleaner. Some marking and fingerprints. 94 pages. Copyright 1955;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-145d0df5b68-0x106-
|
|
|
ACRA 220 SINGLE PHASE VARIABLE SPEED MILLING MACHINE 3 AXIS DRO BRIDGEPORT
HERE IS A NICE RUNNING SINGLE PHASE ACRA VARIABLE SPEED VERTICAL MILLING MACHINE. THIS MILL CAN BE INSPECTED UNDER POWER IN MPLS MN. TO SET UP AN INSPECTION. PLEASE CALL JIM@ 952-931-7974. THANK YOU. NOTE: THIS MILL COMES WITH A BUILT IN 220 SINGLE PHASE INVERTER TO RUN THE 3 PHASE MOTOR NOTE: THIS ACRA MILL CAME OUT OF A 1 MAN SHOP. CHECK OUT THE TOOLING PACKAGE! MAKE: ACRA MODEL: AM 2SAC SERIAL NO: 000423 Meehanite castings 9" x 42" table 3 HP variable speed drive from 60 to 4.500 RPM AC frequency inverter drive R-8 spindle taper Precision ground and chrome plated spindle quill One piece quill pinion and shaft Hardened and ground table. HRC 52 Hardened and ground dovetail ways. HRC 52 Ground ram ways Ground lead screws Turn-in-the-hand handles Automotive paint finish Built-in coolant base Table size 9 x 42" Long. travel 28" ... moreVertical travel 16" Cross travel 12" Spindle taper R8 Spindle speeds Variable 60-4500 Electronic Swivel of Head 360 deg. Quill travel 5" Ram travel 12" Quill feed rate 0.0015- 0.003- 0.006 ipr Head swivel R& L 90 Degrees Head tilt(Up& Down) 45 Degrees Spindle motor 3 HP 220/ 1PH Net weight 2380+ l bs EQUIPPED WITH: 6" COMPOUND VICE WITH SWIVEL BASE. NUMEROUS COLLETS, SARGON 3 AXIS DIGITAL READ OUTS, SET UP KIT, AIR OPERATED POWER DRAW BAR, VARIABLE SPEED DRIVE. WE WILL LOAD FOR FREE ON YOUR FLAT BED. PRICE.$6950.00 SOLD AS IS- AS INSPECTED
|
|
|
Bridgeport J-head Variable Speed Vertical Milling Machine 3Ph 42" Table
Bridgeport J-head Variable Speed Milling Machine Year:1961, Serial:BR 55852, 42"L x 9"W-3"H Table, 5"Quill, Automatic Table Feed, Variable Speed Head(High/Low) Speeds: Low:80.135,210,355) High:660.1115,1750,2720) 1hp Motor 3Ph, 208-220/480 Volt, 15 Collet Tool Holder You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within ... more5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with any carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged 10% of item(s) cost per month for storage. You are bidding on a used item. Please be sure to ask any and all questions prior to bidding. SOLD AS IS/WHERE IS. We will do our best to answer specific questions but please be aware that the equipment may no longer be located within the original facility and historical information and photos may be limited. Please contact us for return details as they change from listing to listing.
|
|
|
MIKRON WF 41 C Universal Milling and Boring Machine
Type: Universal Milling Machine Manufacturer: MICRON Model: WF 41C Year: 1985? Weight: 7000 lb. Integrated Rotary Table. The machine is ready for use and in good condition. Operation and Programming Manuals Included. Ready for inspection in New Britain CT. Purchaser may accept or reject upon pickup. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-145d5f23538-0x114-
|
|
|
Hucro KM-3P three axis milling machine serial# KDB-9008060E
used good mill late 80's. Years ago I was the first to run this machine. Comes with manuals and factory programming text books that I received when trained on it. Assort. tooling but vices in pic not included.
|
|
|
U.S. Burke Vertical Milling Machine Sales Brochure 4 pg
Up for sale is a U.S. BURKE Vertical Milling Machine sales brochure 4 pages covers Vertical mills and features nice condition. any questions ask thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145d834fab7-0x117-
|
|
|
Bridgeport J-head Variable Speed Milling Machine 3Ph 32" Table
Bridgeport J-head Milling Machine Serial# 1689, Year:1942, Table Size:32"L x 9"W x 3"H, Variable Speed Head(High/Low Speed) Forward/Reverse, Low Speed:80.135,210,325, High Speed:660.1115,1750,2720, Head Serial# J1775, 5" Quill, 220/440 Volt, 3Ph, 1Hp, New Paint, You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within ... more5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with any carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged 10% of item(s) cost per month for storage. You are bidding on a used item. Please be sure to ask any and all questions prior to bidding. SOLD AS IS/WHERE IS. We will do our best to answer specific questions but please be aware that the equipment may no longer be located within the original facility and historical information and photos may be limited. Please contact us for return details as they change from listing to listing. For m
|
|
|
Cincinnati Milacron Sabre 1250 Vertical Milling Machine
This Cincinnati Milacron Sabre 1250 CNC vertical milling machine is just retrofitted with brand new MS-Tech CNC control. It is under power for inspection and ready to go for work immediately. A video can be seen at- Brand new MS-Tech CNC control; Fanuc G-code compatible. Installed two new servo motors for X and Y axes. Installed two pairs of new thrust bearings on X axis leadscrew. Comes with chip conveyor. Newly painted. The machine is in a good condition. And spindle makes no extra noise. The CNC control comes with one year limited warranty. The machine has no automatic tool changer(ATC) and it was removed by its previous owner. Great buy for die making or machining job with no frequent tool change need. For questions, please call 1-800-349-6224. Machine Features: Brand new CNC control Two new motors New bearings on X-axis leadsrew Coolant ... moresystem Splash Guard Machine Specifiction: X-axis travel 50" Y-axis travel 25.9" Z-axis travel 25.9" Table Width 53.9" Table Length 26" Spindle Taper CAT40 Power 15HP RPM 8000RPM Dimensions 143" x 132" x 125" Machine Weight 20000 Lb Buyer is responsible for the cost of shipping 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-145db79625b-0x111-
|
|
|
NorthWestern Milling Machine Set up Step Blocks
These are all NorthWestern Brand blocks. They are in good condition but a couple have chips in the top step. See pictures. They are all 1-1/2" wide, the largest is 5-1/2 tall appr. the next one down is 3-7/8" tall, smallest is 2-3/8" tall. these are pretty heavy so flatrate may be best way to ship. I will combine shipping when possible so see other auctions and thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 Inch Milling Machine Vise fits Atlas, Benchmaster, Clausing
This is a 4 inch swivwl milling vise. Probably made in China. Is a pretty nice vise overall, works nceily good soze for a small mill. Missing the bolts that hold the swivel to the vise. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-145deae4e9f-0x111-
|
|
|
2005 Sirona CEREC Redcam Dental Acquisition Unit & Compact Milling Machine
SKU: 33396. 2005 Sirona CEREC Redcam Dental Acquisition Unit& Compact Milling Machine. Condition Mechanical: Tested- fully functional. Aesthetic: Great used condition; some marks. Scratches, and typical signs of use. Patterson Club membership is expired. Does not include parts. Accessories, or items not shown. Features CEREC Redcam Acquisition Unit Features: EF motherboard. Version 3.60 software installed. Active double triangulation camera records cavity from 2 different angles. Product Information from Manufacturer Compact Milling Unit Features: Approx. 15.063 milling minutes. Symmetric grinding places less stress on ceramic and grinding instruments. Includes only items shown: CEREC Redcam acquisition unit. Sirona Compact milling unit. assorted burs. And blocks. Warranty: 30 day return policy. Guaranteed. Specifications CEREC Redcam ... moreAcquisition Unit: Serial-11500. Manufacture Date-2005. Compact Milling Unit: Model and Serial- 5898437 D3329. 13758. Power-100-230V. 50-60Hz, 3.5A. Manufacture Date-2005. Information about this product: Freight shipping requires additional time and cost- contact us for a shipping quote today. Freight shipments are curbside only unless requested otherwise at additional cost. Weight: 300 lbs | Dimensions: 200 in. X 200 in. X 200 in. L x W x H) | Origin Zip: 83714 Freight shipments unistalled and shipped using White Glove Van Line services- Freight items ship from our loading dock capable facilities. Atlas Resell is the MARKET for used dental equipment. We buy. Sell, consign, and repair dental equipment. Our comprehensive services can help you clear space. Reclaim capital, replace equipment, and repair almost anything dental-related. We can even help you find a technician in your area. Payment: Atlas accepts most types of payments. Including PayPal, credit cards, and several other methods, within seven days of purchase. PayPal is the easiest way to pay on eBay- contact us if you wish to pay with another method or require more than seven days to pay for your i
|
|
|
Wells-Index Vertical Mill Manual Parts List Milling Machine 745 756 760 845 856
Our internal inventory number on this product is NP# MN90-GG. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you have a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION You are bidding on a Wells-Index Instruction Manual and Parts List for Horizontal and Vertical Milling Machines. Models 745, 756, 760, 845, 856 Manual Number: Not Listed. Copyright: Not Listed Table of Contents: Machine Controls, Lubrication, Preliminary Information, Adjustments, ... moreOperation, Preventative Maintenance, Trouble Shooting, Spare Parts Recommended, Special Maintenance, Speeds for End Mills, General Speed Recommendations, Table of Cutting Speeds& Feeds, App. Weight: 1 lbs. It is(+/ 30 Pages. Seems complete and in generally Fair used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $7.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $9.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requ
|
|
|
Lot of 2 Atlas Change-O-Matic Milling Machine---For Parts or Repair
758 Four Rod Rd. Berlin. CT 06037 Lot of 2 Atlas Change-O-Matic Milling Machine-For Parts or Repair, These vintage mills are missing the motors and may be missing other parts. They are being offered as-is and no returns will be accepted. Please inspect our high-resolution photographs. This lot is available for local pick-up or can be shipped as freight. Please contact us for a quote. Please contact us if you are local and would like to pick the item up. Our address is below. Auction it T O DAY of Connecticut 758 Four Rod Rd. Berlin. CT 06037 Phone: 860-828-4400 Payment: All funds must clear before the item is shipped or picked up. We ask that you forward your payment ASAP to avoid any delay in the transaction. Buyers are allotted 4 days from the end of the auction to remit payment. If the buyer has not paid within this time. We reserve the ... moreright to re-list. Due to the fact that we are trading assistants, all auctions must be sold"AS IS. Sales tax of 6.35% will be added for any pick up sales and for items sold anywhere in Connecticut. Shipping: Buyer agrees to pay the amount listed(US Dollars) to cover shipping and handling. We CANNOT ship to P.O. boxes. We generally use UPS for all US domestic shipments and USPS for all international shipments. Auction it TODAY reserves the right to ship with other shipping carriers. We will not mark international shipments as gifts and will declare the proper value. We are not responsible for duties and import taxes that you may be charged upon receiving your item. All international sales are final. We require a valid contact phone number for International shipments. We ship 5 days a week(Mon-Fri) Items will ship within(2) to(3) business days after payment has been received. Once the item leaves our facility. We are no longer responsible for the item. All items are from our warehouse in F.O.B. Berlin, CT and the seller accepts no responsibility for the item after it leaves our dock. Any freight claim is between the carrier and the buyer. Please inspect all packages c
|
|
|
Dyna Myte 3-Axis CNC Vertical Milling Machine, Model # DM 2400 - DYNAMYTE
This is a smooth running machine capable of steel machining but is just too small of work envelope for me. Runs but this machine is being sold as is since shipping would be too expensive. Technical Specifications: 110 v/ 1 ph/ 60 hz, Max. distance spindle nose to table 9.1 inch, Spindle stroke 1.5 inch, Quill diameter 1.4 inch, Spindle speed 0-10 000rpm, X-axis travel 6.2 inch, Y-axis travel 5 inch, Z-axis travel 4 inch, Work table area 13 x 6 inch, Spindle motor 0.5hp, Resolution all axes 0.0001" Repeatability 0.0005 inch, Overall size 24" 22" 22" h, Net weight 250 pounds, Equipped With: Chip-tray, Half-horsepower spindle motor, Hardened steel spindle. Speed range 0-10 000 rpm, Internal taper with externally-threaded nose. Allowing the use of, Operating manual, NOT THE TABLE Dynamyte 2400 bench-top 3-axis CNC milling ... moremachine. An ideal size for much of the work that comes through the typical model engineering workshop. This is an industrial-quality machine based on substantial iron castings for chassis, table and headstock and with a half-horsepower spindle motor(making it a good three-man lift) Hardened steel spindle. Speed range 0-10 000 rpm. Internal taper with externally-threaded nose, allowing the use of ESX-16 collets and a wide range of screw-on tooling such as fly-cutters, slitting saw arbors etc. The quill can be manually controlled for drilling. One-shot lubrication to table. Three axis CNC with built-in controller. Featuring a powerful macro language allowing basic milling operations through to complex canned cycles, arcs, circular pockets, bolt circles etc. Programs can be repeated, mirrored, rotated and offset allowing complicated components to be programmed quickly. There is provision for storing tool offsets. The programming manual is comprehensive and includes many worked examples. The controller has a serial port, allowing programs to be created and edited on a PC if desired. Specifications: Max. distance spindle nose to table 9.1 inch Spindle stroke 1.5 inch Quill diameter 1.
|
|
|
Nichols Horizontal Milling Machine with arbor & support. in real nice condition
Nichols Horizontal Milling Machine with arbor& support. in real nice condition. Selling as You see it. Free loading on Buyers Truck from Pa zip code 18966. Buyer pays all shipping costs.
|
|
|
Boring Head-Criterion for Milling Machine; 5/8" Shank, Accepts 1/2" Shank
Boring Head is in great shape. Owned and cared for by a meticulous Professional Tool and Die Maker. Body measures 1.5” x 1.5” x 1.2 high Shank.625” x 1.00 High“ Overall Height 2.25” Holds ½” shank boring bar 0.001” increments USA Made.
|
|
|
BRIDGEPORT MILL ELECTRIC MOTOR FRACMO FEED DRIVE 6F END DC USED MILLING MACHINE
Power feed fitted are the Bridgeport 6F type. May fit others. To help you identify the motor fit the label details appear as follows: Motor"Fracmo" made by"Factional HP motors Ltd Enfield England Frame No H39412TBX Volts 90A 100F Phase DC Amps 4.6 RPM 4500 HP 370 Watts Rating INT(intermitent) I personally took this from a working machine about 8 years ago when we replaced the feed screw which came supplied with its own new motor.This was working at the time. But has been stored in my garage ever since. You are welcome to view and test. But it is sold as seen.
|
|
|
Rarely used Smithy 1340-I 3-in-1 table top milling machine
Extremely Accurate +/0.0005” Built and quality tested to assure light industrial standard repeatability of +/0.0005” § Industry Standard Tooling– R-8 on the mill spindle. D1-4 on the lathe chuck, and MT3 on the tailstock– all industry standard, easy to find and low cost tooling. § Efficient Quick-Change Features– rack and pinion carriage feed. X& y power feed, quick change gear box and threading dial– features that make your jobs go easier and faster. § CNC/DRO Ready– drilled and tapped for easy attachment of CNC and DRO mounts. § Extended Tailstock– adds extra stroke- and capacity to the tailstock. § 40” Between Centers on the DRO– Ready for extra-long projects like gun barrels or axles. § Larger 2 1.5 Spindle Drive § Crash Protection System– through entire speed range for exceptional low speed performance. ... more§ Extended Tailstock– adds extra stroke- and capacity to the tailstock. § Millhead Locking System– assures high precision milling operation. Many tools. Collets, bits. most brand new 10" rotary table brand new in box Grizzly H6095 DRO brand new in box. The table/cabinets it sets on.
|
|
|
TDM SA HIGH SPEED MILLING MACHINE SPINDLE ATTACHMENT *30,000 RPM* + CASE
TDM SA HIGH SPEED MILLING MACHINE SPINDLE ATTACHMENT*30.000 RPM* + CASE Click Images to Enlarge TDM SA HIGH SPEED MILLING MACHINE SPINDLE ATTACHMENT*30.000 RPM* + CASE KW MAX: 4.5 A MAX: 8 V: 3 x 250 HZ: 1000 MK045.302.02 B BOX MEASURES: 14" x 12" x 9" WEIGHT: 30 LBS. CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground. FedEx Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 32 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard ... morepacking A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufactur
|
|
|
16" X 26"x 11" T-SLOTTED BOX TABLE, RISER BLOCK,RADIAL DRILL, MILLING MACHINE
16" x 26" x 11" T-SLOTTED BOX TABLE
|
|
|
LPKF Protomat 93S PCB Milling Machine Circuit Board Plotter
It came from working environment. Though I have no measure to inspect it thoroughly. I guarantee its working condition. In the unlikely event that it doesn't work as it should, buyer will be fully refunded, including costs for return. Photos show the actual item being sold. Nothing other than what is photographed will come with. Shipping via DHL Worldwide Express. International Sale: The item is located in Korea. The buyer is liable for tariff or any customs charge due to importation. So please verify the customs appraisement condition of your country before purchasing. Don't like the price? Please make an offer!
|
|
|
Bridgeport BR2J #11040001 Series I Milling Machine Original Owners Packet 1986
Bridgeport BR2J#11040001 Series I Milling Machine Original Owners Packet 1986 Operation and Maintenance Manual 1104001 MSD Data Spec 11040856 Attachments and Accessories Safety Manual C-1128 Service Instructions for Bijur Type L5H Lubricator Quality"every step of the way" leaflet
|
|
|
Bridgeport Milling Machine 90 Degree R-8 Collet Head W/ R8 Collets
You are bidding on a Used Bridgeport Milling Machine 90 Degree R-8 Collet Head with 9 used R8 Collets Milling hesd is in Good condition it has been cleaned inspected and painted and ready to put to work. SEE PHOTO’S Best Describes the Item up for Auction. Buyer pays S&H.US Buyers If you have any questions or concerns please email me before bidding at. Winning bidder to pay within 3days of close of auction. Good luck bidding. Auction. I will combine shipping on auctions to save on shipping costs. Note to all buyers I am not a expert on this item please ask questions I answers all questions email to me right up to 4 hour before auction ends. Also I expect email contact from buyer within three days Once you receive your item. Please remember to leave feedback. If you have any questions or problems, please email me so we can resolve the issue. ... moreNegative feedback does not solve the problem, communication does. I am committed to give the best customer service possible Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Universal Milling Machine Clamp Set
Up for Auction 52 piece Universal Milling Machine Clamp Set. It comes with a wooden tray for all 52 Pieces. This works great.
|
|
|
LAST ONE! USED STRAIGHT SHANK MILLING MACHINE ARBOR 1.00" SMA (1.25"-Shank)
LISTING IS FOR A USED STRAIGHT SHANK MILLING MACHINE ARBOR BRAND- SHANK- 1.250" OAL- 5.250" FROM BOTTOM TO TOP OF NUT KEYWAY- 250" FLANGE THICKNESS- 509" FLANGE DIAMETER- 2.745" SPACER THICKNESS- 500" DIAMETER- 2.497" SHANK LENGTH- 3.125" CONDITION- GOOD USED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD ... moreAS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT
|
|
|
2008 Sirona CEREC Bluecam Dental Acquisition Unit & 2012 MCXL Milling Machine
SKU: 33401. 2008 Sirona CEREC Bluecam Dental Acquisition Unit& 2012 MCXL Milling Machine. Condition Mechanical: Tested- fully functional. Aesthetic: Great used condition; some marks. Scratches, and typical signs of use. Minor dent on side of cabinet. Does not include parts. Accessories, or items not shown. Features CEREC Bluecam Acquisition Unit and MCXL Milling Machine Features: single image acquisition. Image acquisition can be applied to single tooth and quadrant with full jaw acquisition possible. Camera can be placed directly on tooth. Automatic exposure control. LQ motherboard on acquisition unit. Approx. 806 milling minutes on milling machine. Version 4.2 software on acquisition unit. CEREC Bluecam Acquisition Unit and MCXL Milling Machine Benefits: reliable and efficient optical impressions. Ability to export restoration designs ... moredirectly to lab for fabrication. Single visit restorations. Easy to operate Includes only items shown: 2008 CEREC Bluecam dental acquisition unit. 2012 CEREC MCXL milling unit. Warranty: 30 day return policy. Guaranteed. Specifications CEREC Bluecam acquisition unit serial: 01274. CEREC Bluecam MCXL milling unit serial: 124136. CEREC Bluecam acquisition unit date of manufacture: 2008. CEREC MCXL milling unit date of manufacture: 2012. Information about this product: Freight shipping requires additional time and cost- contact us for a shipping quote today. Freight shipments are curbside only unless requested otherwise at additional cost. Weight: 300 lbs | Dimensions: 200 in. X 200 in. X 200 in. L x W x H) | Origin Zip: 83714 Freight shipments unistalled and shipped using White Glove Van Line services- Freight items ship from our loading dock capable facilities. Atlas Resell is the MARKET for used dental equipment. We buy. Sell, consign, and repair dental equipment. Our comprehensive services can help you clear space. Reclaim capital, replace equipment, and repair almost anything dental-related. We can even help you find a technician in your area. Payment: Atlas accepts most
|
|
|
Enco Complex Drilling Milling Machine Benchtop Model 91002 Circa 1982 Will Ship!
Enco Complex Drilling and Milling Machine Circa 1982 Specifications according to Manual Drilling Capacity 1 1/2" DM30) 1" DM25) Full Back Cutter Capacity 3" DM30) 2 1/2" DM25 End Mill Capacity 3/4" Swing 16 1/2" DM 30 16" DM25 Max Distance Spindle Nose to Table 16 1/2" Spindle Taper R-8 or MT#3 Spindle Stroke 5" Diameter of Spindle Sleeve 3" Head Swivel 360 degrees Diameter of Column 4" Spindle Speed 50 cycle 230 to 1800 rpm 60 cycle 260 to 2100 rpm Right and Left Stroke of Table 16 1/2" Forward and Backward Stroke of Table 5 1/2" Working Area of the Table 8 3/8" x 28 3/4" Net Weigh 300 KG/ 661 lbs Crating Fee is $100 for commercial shipment. Save shipping and pick up locally in Scituate. Rhode Island. We can help arrange shipping via Freightquote or Uship. Crated ... moreon a standard skid it would weigh approx. 750 lbs. About Us: Antyke is my brick and mortar(actually cinder block) antique shop located in Scituate. Rhode Island. I have been buying and selling on Ebay since 1997 and have packed and shipped hundreds of large and fragile items. Your shipment will be well packaged with bubble wrap and a sturdy box. I have a no questions 30-day satisfaction guarantee. Return for a full refund if not satisfied. If there are unforeseen problems with the item or if it is not as described, return and I pay postage both ways. I ship both Fedex Ground/ USPS Parcel Select/ Priority which ever is cheaper based on your location. If you have a preference. Drop me a note before checking out and I will get an exact quote based on your area. People outside lower 48 states, small shipment is by USPS. Postage may be more expensive than quoted, please drop me a note before checkout or while the auction is live and I will get you an exact quote. You can always pick up local at our shop Antyke on Route 6 in Scituate, Rhode Island. We ship anywhere in the world. Large items are crated and brought to local freight forwarding terminals for convinient and cost effective s
|
|
|
American Tool 16" Mill/Drill Milling Machine Vertical Drill Press - 2 HP/3 PH
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2479125 A: 0013000000CXCfg O: 0065000000REzSe PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for an American Tool 16" Mill/Drill Milling Machine Drill Press- 2 HP/3 PH. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: American Tool(make provided by consignor- ... moreno data plate or name placard noted) Model: Unknown Type: Mill/Drill Machine Serial No: Unknown Features/Specifications: Throat: 8" Swing: 16" Travels(X. Y-axes) Unknown Baldor Motor: 2 HP- 208-230/460V- 6.5-6.2/3.1A 1725 RPM- 60 Hz- 3 PH Table Size: Original: 28-3/4" x 8-3/4" Added Top: 34" x 12" Forward& reverse control Variable speed Allen-Bradley power cabinet Light Stand Dimensions& Weight: L 39" x W 41" x H 74" Shipping Weight: 725 lbs Condition: Working at time of decommission. With the following issues: The quill recoil is poor- may require lubrication or spring adjustment Normal wear from previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. I
|
|
|
Thomson 100 Tracer Copy Template Contour Router Milling Machine Table Bridgeport
Here’s a Thomson Mod. 100 Tracer Copy Template Contour Router Milling Machine Table for Bridgeport type mills in Exceptional Condition! Don't have CNC? Don't want CNC? Don't draw in CAD? Can't accurately dimension existing part? Can't create code? Think"G41" is a world economic summit? Do rotary tables make you dizzy? YOU Need This. Overview- Workpiece is fixed to table or in vise attached to table. Template. Contour pattern, broken part, etc. is fixed to"Stage" in front of/below table. The left-hand table"Handlebar" toggles upward slightly- this releases the electric X/Y axis brakes which are normally ON. The table can then be guided via handlebars precisely and effortlessly in ANY direction/s. The Stylus is engaged in the template to control limits of table travel. The Stylus Quill has a ... moretwo position knob which either lifts the stylus up and out of template and releases brakes or only releases brakes when left-hand handlebar is toggled upward. Personal experience background- In my earliest days as a T&D apprentice a master moldmaker shared with me a technique know in the"rubber city" Akron. OH) as"Jig Riding" Briefly. A thin, two dimensional complex template or jig is created(historically on a die filer) The jig generally had master dowel holes located on a known center line, somewhere outside the jig's actual profile. The jig was then installed on dowels atop/around the cavity or core to be produced(usually with a tapered end mill or form tool) The end mill's length was adjusted so that the smooth, round, un-fluted part could be very lightly"rubbed" around the jig profile with the flutes below cutting the part. This was best accomplished with the most sloppy old worn out mill in the shop as you could"feel" the cutter riding the jig through the table handwheels. It takes practice and some guys never get it. My early attempts yielded frustration and broken end mills. The next time I had the opportunity to work w
|
|
|
Grand (Germany) 1-1/4" NMTB 40 Shell Mill Holder Milling Machine Machinist Tool
Used actual item pictured nmtb 40 shell mill holder. Takes 1-1/4" mills. All threads look good operationally. Ships padded flat rate unless you agree to pay to upgrade to box shipping. Be sure to check out my other items for more great tooling finds.
|
|
|
Legacy Artisan 24" x 72" x 11" Dia. 5-Axis Hybrid CNC Ornamental Milling Machine
Legacy Artisan 72 5-Axis CNC System is fully assembled. Tested, ready to run and includes: Welded Frame, Floor Stand, 220 V Single-Phase Whisper Quiet Water Cooled Spindle, Homing Sensors& Soft Limits, Work Offsets(up to 253) 3-Axis Table, Feed Through Frame for Vertical Fixturing Capabilities, Legacy's Exclusive 5-Axis Turning Center, Smart Tool- Auto Z Zeroing for both 3 Axis Machining& 5 Axis Turning, Dell Laptop Computer, Legacy's 5-Axis Hybrid CNC Control Interface& Software, Remote Access Software for training& service, Legacy's CCAM 5-Axis Turning Software, ArtCAM Express Design Software, ArtCAM Training DVD(4.5Hours) Online CNC Training Classes& Forum, Weekly Online CNC Training Webinars, Project Library including Drawing. CAD/CAM& read-to-run G Code Files, Includes Dell Laptop with Mach3 Control ... moreSoftware and several 3D/CAD Design Software Applications. Several cutters included. Smart tool touch pad is broken and needs replacing. This is a minor/easy fix. And the machine operates normally without this. This setup retails for over $25.000. This machine is sold as is with no warranty. Some photos are stock photos from. Actual item may be slightly different.
|
|
|
Makino KE55 Milling Machine Maintenance Guide
Makino KE55 Knee Type Milling Machine Maintenance Guide w/ Makino Professional JN Control. 3-ring binder with about 1" of paper. Original from the manufacturer. Not a copy.
|
|
|
Bridgeport Series 1 milling machine with 12x48 travel DRO and power feeds
This is a production machine that we no longer need. X axis has a bridgeport power feed. Pneumatic power drawbar included. Has an aux 110v transformer on the side for outlets. Has a 2 axis Acu-rite DRO installed. Comes with 1 LED light attached. Second light and collets not included. We can load on a truck but buyer is responsible for shipping. Please feel free to call Brad at 309-265-6732 if you have any questions.
|
|
|
1" X 18" HORIZONTAL MILLING MACHINE ARBOR, RUNNIG BUSHING, SPACERS & No 50 TAPER
uareTradeTHIS IS A 1" X © AP6.0TH THIS IS A 1" X 18" HORIZONTAL MILLING MACHINE ARBOR WITH SPACERS. RUNNING BUSHING, ARBOR NUT& No 50 TAPER FOR USE ON MILLS TO HOLD SAW BLADES AND VARIOUS CUTTERS. IF THIS IS NOT THE SIZE YOU WANT. E MAIL ME A DESCRIPTION OF WHAT YOU WANT, I DO HAVE CUTTERS AND MORE ARBORS. FOR SHIPPING QUOTES CALL TINA AT 727-362-8318, ALL OTHER QUESTIONS CALL GERRY AT 727-547-0616. WEIGHT IS 16 LBS, OVERALL LENGTH IS ALMOST 26 INCHES I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616. FOR SHIPPING QUOTES, CALL TINA AT 727-362-8318 WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! I offer an exclusive thirty-day return privilege. If you are not satisfied ... morewith your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 47 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Buy with confidence! On Feb-18-09 at 02:10:41 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing
|
|
|
2H KEARNEY & TRECKER Horizontal milling machine, #50 spindle
ONE USED- KEARNEY& TRECKER Plain Horizontal Milling Machine Model: H Serial Number: 28-3596 10” x 50” T-Slotted Table#50 Taper Spindle Spindle Speeds from 35 to 1400 RPM Arbor Support 5 HP 440 Volt Electrics. Machine is offered subject to prior sale and strictly subject to acceptance to the terms and conditions as stated on Belmont Machinery Company's Invoice. We reserve the right to correct any typographical errors. Please note that these are approximate specifications only and that we advise that you personally inspect this machine to confirm the information provided. Seller will load the machine onto buyers truck F.O.B Aurora. IL. Buyer is responsible for all freight charges. Questions call Belmont Machinery Company at 630-844-9288 or email sales@belmontmachinery Please contact us before paying in full.
|
|
|
CINCINNATI MILACRON 650-20 MILLING MACHINE
CINCINNATI MILACRON 650-20 MILLING THE MACHINE IN GOOD WORKING CONDITION.460 VOLT 650 RPM VERTICAL HEAD 325 P.S.I TOTAL MACHINE WEIGHT 29000 LB FOR MORE INFO PLEASE CALL US 904-996-8888 EQUIPMENT TRADING LLC 6141 ARLINGTON EXPRESS WAY JACKSONVILLE FL 32211
|
|
|
E4D Nevo Dentist Dental Acquisition Camera, ASUS Laptop, & D4D Milling Machine
SKU: 33867. E4D Nevo Dentist Dental Acquisition Camera. ASUS Laptop, D4D Milling Machine. Condition Mechanical: Tested- fully functional- comes from a private working practice. Aesthetic: Great used condition; some marks. Scratches, and typical signs of use. Does not include parts. Accessories, or items not shown. Features D4D E4D Dentist Nevo PlanScan Acquisition Camera Features: High-speed laser captures images from multiple angles. Accurate scanning. Software quickly builds a library of images that show the actual dentition. No powder required. Compact design. D4D E4D Dentist Milling Unit Features: Dual spindles mill both sides of the restoration simultaneously. Patented design minimizes vibration Intuitive touchscreen controls. ASUS Laptop Features: Romexis imaging software installed. Windows 8 64 bit operating system. 4Gb. 800 Mhz speed(lower ... moreoperating voltage) RAM. Intel Core i7 4700HQ CPU. Benefits: Nevo PlanScan camera and ASUS laptop take up less space than standard E4D acquisition unit. Create interactive 3D images of patient teeth in seconds. Optimal milling performance and restoration integrity. Precision accurate milling. Easily control milling process with touchscreen controls. Includes only items shown: D4D E4D Dentist Nevo PlanScan Dentist acquisition camera. ASUS G750J laptop. D4D E4D Dentist milling machine. Warranty: 30 day return policy. Guaranteed. Specifications D4D E4D Dentist Nevo PlanScan Acquisition Camera: Model and serial-E4D-SCAN1. 12370001. ASUS G750J Laptop: Model and serial- G750J. DBN0CY127200458. D4D E4D Dentist Milling Machine: Power-100-240V. 50-60Hz, 300W. Model and serial-E4D-DMC1. 110892. Date of manufacture: April 2009. Information about this product: It arrives intact or your money back! Atlas' shipping is of the highest quality with maximum protection for your package. We have years of experience and use only the best of materials to ensure you get exactly what you ordered. If the item arrives damaged when your shipment arrives. We guarantee your money
|
|
|
Acroloc M15L CNC 4 Axis Milling Machine
Acroloc cnc milling machine M15L model Automatic Tool Changer 15 Position Spindle Diameter 4 5/8" Z Quill Travel 9" 6M Control Actual Machine Table travel is 32x16(X-Y) Spindle Horsepower 10 220 3 phase Is wired for 4th axis. Comes with about 20 tool holders Can use new spindle belt. Also some missing button covers. Machine works fine. Is hooked up. And can be inspected by buyer! Machine is sold as-is no returns! Can load on your flat bed trailer for free.
|
|
|
New Hermes Engraver Vanguard 3000 Milling Computerized Engraving Machine
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 New Hermes Engraver Model: Vanguard 3000 INCLUDES: Computer. Monitor Large lot of Carbide Engraving Bits Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This Unit Was Tested and Works Fine Shipping: Local pick-up. If you want these items to be shipped you must contact us before bidding! Please see picture for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund, less shipping. You can contact me at phone: 818) 441- 8941 if ... moreyou have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
BRIDGEPORT milling machine FEED TRIP LEVER ASSEMBLY
ORIGINAL BRIDGEPORT PART
|
|
|
Matsuura ES 450H Horizontal Milling Machine Instruction Manual
1" Thick Bound 1998. Funuc System 18i m CNC control. Horizontal Milling Machine.
|
|
|
lathe quick change tool holder aloais ca-2 milling machine
used lathe quick change tool.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146a4492425-0x11a-
|
|
|
LEGACY WOOD MILLING MACHINE
Legacy Ornamental Milling 1500EX Machine. MINT Condition. This machine was used less then 6 times in a professional shop which is a climate controlled environmental. Includes Motor Assembly. 18 cutters, most never opened still covered with protective sealant) 10 index hubs, all instruction manuals, original index hubs, gear multipliers and gear reducers. The following cutters are included: 7571/rope moulding-s211l-2/flute straight bit-7572/ rope moulding-7554/ barley twist-2704/bottom cleaning-3934/classic plunge-7551/barley twist-805/core box bit-706/90 degree v groove-7504 point cut bit-7586/rope moulding-7546/barley twist-7593/plunge cutting bit-7553/barley twist-2706/bottom cleaning bit-808/core box bit-7573/rope moulding-7552/barley twist. Please view legacy ornamental milling machines to understand the capability and value of this opportunity.
|
|
|
Cincinnati Service Manual/Parts List Catalog-1-12&1-18 Auto Milling Machine
original factory manual. Nice shape
|
|
|
Brown & Sharpe No. 20 Universal Milling Machine manual
notes: 12 $12 Operation. Maintenance and Repair Parts Brown& Sharpe No. 20 Universal Milling Machine"Operation. Maintenance and Repair Parts of the Brown& Sharpe No. 20 Universal Milling Machine, Sliding Head Type, 8.5" x 11" softcover, 80 pages. Original manual. Code on the title page is 750-7-55. The covers are heavily soiled and stained and have writing on them. Contents are in very good condition overall with a scattering of smudges and some light turning wrinkles. The binding is secure. The name of a machine shop is ink-stamped on the title page and on one other page. Not ex-library. I'm happy to provide more details on condition. However. Please read my before asking your question. I accept PayPal only. No exceptions. Buyer pays actual USPS shipping costs(no handling or materials fees) If you do not live in ... morethe United States: I offer priority shipping only. Overseas shipping may not be available for all items. Please read my before you bid. All buyers: Please read my sales terms that follow the description. Scroll down to see another picture. Sales Terms Shipping Options: All packages are shipped via the United States Postal Service. When feasible. I offer a choice of priority or economy(which usually is media rate or first class) Bound printed material containing advertising cannot be shipped media rate. I can't accommodate local pick-ups unless I specifically offer the option in the listing. If you live close to me, please be prepared to complete the transaction through the mail. Publications Containing Advertising: Magazines. Yearbooks, travel guides, directories, catalogs, and other bound printed material containing advertising cannot be shipped media rate and must be shipped priority or parcel post. See the and eBay's. The USPS regulation is very clear and specific about this and does not make exceptions. Please don't e-mail me telling me that old magazines are exempt because the ads are outdated or yearbooks are exempt because they're not commercial enterpris
|
|
|
LOT 4 CNC Milling Machine Software FeatureCAM Delcam 2005-06-07 5 Axis
LOT 4 CNC Milling Machine Software FeatureCAM Delcam 2005-06-07 5 Axis This software belonged to my brother-in-law. I do not know much about them other than they are in great condition. I know of nothing else that goes with them. I know they are out dated but for the right person I'm sure they will be perfect. There are the 4 disc's- 2 of them are the same 2006. 1- is 2005 1- is 2007 Do n't pass this one up! Please email me with any questions? I PREFER SERIOUS BIDDERS ONLY PLEASE! I DO NOT ACCEPT BIDS WITH LESS THAN 3 FEEDBACKS! Purchase multi items and save on shipping. Payment by Paypal* Return shipping paid by buyer*I package my items very carefully. Payment expected within 7 days of auction's end. Failing to make a clearing payment within 7 days may cause you to forfeit your bid and be reported to eBay. Winning Bid pays ... moreShipping& Handling. I will ship your item within 3 business days after payment is received. I will notify you as soon as possible if there should be a delay in shipment. All sales are'As Is' unless otherwise noted. All sizes& weights are approximate. I do my best to describe each item fully to the best of my knowledge and research. please read full item description carefully.Please email with questions before bidding.
|
|
|
Straight Flute Reamer Set 1240-5010 Machinist Tool Metal Lathe Milling Machine
Set of reamers. Used. See pics of actual item. Be sure to check out my other items for more great tooling finds.
|
|
|
Armstrong Heavy Duty Forged C Clamp Machine Shop Lifting Milling Welding
This heavy duty clamp opens to approximately 2 1/4 inches and body dimension is 5 1/2 x 5 inches approximately.Note there is a chip on the jaw see picture. Questions welcome. I ship USA only;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146a5260e74-0x10f-
|
|
|
Nikken Bt45 1-1/2" End Mill Holder Milling Machine Tool Holder Machinist Find
Nikken end mill holder as seen in pics. Has pull stud missing one lock screw.
|
|
|
Cincinnati No. 3 Universal Horizonal Milling Machine
Good. Used Cincinnati horizontal milling machine. 220 3 PH power. For more information, call 706-278-8130 and ask for Gordon.
|
|
|
1 BRIDGEPORT milling machine Gear Shaft Clutch Insert KNEE CRANK
Bridgeport PARTS USA MADE USED IN EXCELLENT SHAPE
|
|
|
2 BRIDGEPORT milling machine SCREW BUSHING
Bridgeport I WILL SEND 2 OF THEM WITH THE THREAED NUT
|
|
|
Marposs T60s Probe For CNC Milling Machine Cat 40 REDUCED
Marposs Probe T60s Cat 40 Taper Used very little Stylus Missing Compare new@ $5000.00 We have no way of testing sold as-is no returns Pictures are important part of Item description All auctions subject to prior sale Please check our other auctions so that you may save on shipping charges We usually ship out Paid items within 3"Business Days" after the day Payment is received. Saturdays. Sundays& Holidays are not counted Thanks for looking at our auctions.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146a69ec468-0x10f-
|
|
|
MACHINIST TOOL LOT MIXED TOOLS METAL LATHE DOG TOOL POST / MILLING MACHINE
This is a mixed lot of used machinist tools. See pictures. They are from a machine shop that closed. Low starting bid. Happy bidding 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-146a6a20b22-0x109-
|
|
|
Milling Machine Webb Champ CNC w/Anilam 1100 2-axis control
Webb Champ milling machine with Anilam 1100 2-axis CNC control Specifiactions Model 4VH 10" x 50" Table 2 Adjustable worklights Bijur auto lube 3HP Variable speed motor R8 Spindle Machine opporator/parts manual and Anilam programing manuals are with the machine. The mill is in running conditon. Please click on link to see video. Kurt vise and machine accessories are not included. Subject to prior sell. Please contact Alex Prange 864-879-4719 with any questions.
|
|
|
EX-CELL-O Ram Turret Milling Machine (Bridgeport Type)
This is a great mill. It is heavy duty compared to a Bridgeport, with the Universal 300 tool spindle tool holder it will take a much deeper cut. This mill comes with a 5 1/2" riser to receive bigger parts to cut, also has an Anilam wizard III x and y reader. The x axis table feed is fully operational and also has a 6" American made mill vise. This machine has a 2hp 3phase 230v or 460v motor. This machine is a work horse they are a harder type mill to find at this great of a deal. I have added to this mill with additional tooling pictured are about 60ea universal tool holders and over 100 collets there is even morse taper holders 2 sets of sizes. these holders are easily worth 40 dollars ea. This is a fully equipped mill for a job shop.
|
|
|
Sine Plate 3.5"x6" - tilting milling machine fixture, very high quality
This is a used but excellent and high quality 3.5" x 6" machinist's sine plate. I don't know the make. But it seems high quality enough to be German, US or Japanese made. The hinge has no play whatsoever, very tight. Buyer pays actual shipping for a package approximately 4.5" x 6.5" x 9" and 11 lbs, with no additional handling or packing charges. I will only ship within the US to a PayPal certified delivery address. Payment must be received within 2 days of the auction closing.
|
|
|
Angle Block Plate Machinist Set Up Tools Milling Machine Metal Lathe Fixture
Machined steel angle block measures approx. 2 5/8 x 1 7/8 x 2 5/8 1/2 inch thick
|
|
|
Bridgeport Tru-Trace Milling Machine
PRICE REDUCED! Can Mount up to 3 Heads(comes with one now) Bridgeport- Tru-Trace 360/3D mill. This mill was making military aircraft parts when last taken out of service at Avco. I include closeups of the ways for you to look at. This mill has had light service. In the aircraft industry. You can still clearly see the scrape marks on the ways. If there is wear on the ways, I can't see it. Checking with a good level- shows level. With any older mill, wear is a important issue- and it's why I originally purchased this specific mill. Serial# J-107690 Single J head. Includes Tru-Trace Hydraulic power unit. Hydraulic unit often sells for a thousand dollars or more by their self. In pretty good shape when taken from service. Hydraulic hoses will need replacement before using. I will be happy to answer questions- and will have more pics. ... moreIf interested. Transportation is your responsibility. We are in Richardson(local to North Dallas) Texas. The Tru-Trace 360/3D is transportable in several ways. We can make suggestions, but it is your responsibility to transport. We found it straight forward to transport with a locally rented hydraulic trailer. I am changing up the workshop- so it's time to sell this mill. Please- no trades or"deals" This is a tracing mill. Runs on 3 phase(can convert power with a static phase inverter. electric. The hydraulic unit is separate- and can be used a variety of hydraulic needs. HAPPY to answer questions. Subject to alternate sale.
|
|
|
IMOBERDORF MILLING HEAD ROTARY TRANSFER MACHINE SCHAUBLIN COLLET
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Up for sale is this milling head with a 32 mm spindle that takes a Schaublin b-8 mm collet. Complete with drawbar. The spindle rotates nicely. Not marked but pretty positive it came off of an Imoberdorf rotary transfer machine. 3 phase 220/380. I will be happy to remove the spindle if that is all you have use for to save shipping costs. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-146a7306609-0x10b-
|
|
|
South Bend model A Lathe, Atlas Milling machine & EXTRAS
CONTACT BEFORE BIDDING or with any questions. Great condition South Bend Model A Lathe and an Atlas Milling Machine. There are also boxes of cutting bits. Chucks, accessories, and equipment to go with the machinery. I am about to move and would like to free up space in the new garage since I won't be able to build a workshop for about a year. I only took photos of a few of the extras before my camera died on me, but I will post more of the milling machine and accessories. These are being sold as a set and I will not ship. Local pick up only. If interested. I also have a shaper and some other machinery, but have that in another workshop in Ohio since I didn't bring them with me to Kentucky when I moved to Fort Knox. Thanks for looking!
|
|
|
Vintage industrial lathe milling wheel w/handle machine tool steampunk cast iron
Very cool old heavy duty machine wheel. Possibly from a lathe. Surface wear, paint loss from age and use. Very solid, heavy duty iron. Some imperfections in original casting, somewhat normal. It is just over 8" in diameter, looks to be about a 7/8" shaft hole, and the handle sticks out just under 3" The set screw is very tight, I sprayed some WD-40 on it to screw it in and out. Great display piece or ready to be put back into service. As with just about every thing I have listed, I will ship this USPS Priority Mail with tracking and insurance included. Thanks for looking and please check out my other listings through the week.
|
|
|
Parlec Ch30-03Mt3 Chiron 30 Morse Taper 3 Milling Machine Machinist Tool Holder
Lightly used ch30-mt3 adapting tool holder by Parlec. Bearing is very smooth. See pics of actual item you will receive. Be sure to check out my other items for more great tooling finds. Ships padded flat rate envelope unless you want to upgrade to a box($14 total for shipping)
|
|
|
Bridgeport Milling Machine 1HP 36 inch table in good Condition!
You are bidding on a used 1HP Bridgeport Milling Machine with a 36 inch table in great running condition. 1HP 220v 3 phase(can be converted to single phase for additional cost) We can also add any other features you might need. Like a Single phase Converter or Digital Read Out. please inquire. SPECIFICATIONS: 9" X 36" BRIDGEPORT VERTICAL MILLING MACHINE MODEL: J-HEAD. S/N: 12/BR 37982 TABLE SIZE. 9" X 36" MAXIMUM WEIGHT OF WORKPIECE. 750 LBS CROSS TRAVEL. 9" QUILL TRAVEL. 5" KNEE TRAVEL. 16" RAM TRAVEL. 12" MINIMUM/ MAXIMUM THROAT DISTANCE. 6-3/4" 18-3/4" SPINDLE TAPER. R8 QUILL TRAVEL. 5" QUILL FEEDS. 0.0015" 0.003" 0.006" APPROXIMATE WEIGHT. 2.000 LBS This mill is in good working condition and everything works. table has drill marks and dings on it. EQUIPPED WITH: Machine ... moreis solid and tight. Head is quiet Can be inspected under power at our Lincoln. RI warehouse Questions Call Larry 401-965-5557 Palm Tree Cat#L-00081-060814-37982 Bid with Confidence on this item. Check our feedback! All information deemed accurate but may vary from model to model. Call Larry for any questions you may have. Call 401-965-5557 or Email: Larryrazza@hotmail.com_ Equipment Financing Available Through These Fine Leasing Companies: Online leasing applications(get monthly payments) FIRST LEASE https:id51.securedata.net/firstleaseonline/creditapp/Direct_Credit_App.html DIRECT CAPITAL LEASING http:ebay.directcapital.com* Please Note: Not all machines may qualify for Leasing. Payments: We accept company checks and Major Credit Cards. SHIPPING: Contact us for great rates on shipping. We always get better rates. Please email us for a rigging and shipping quote(just include the zip code when inquiring and if you have a loading dock or if you are a residential delivery.
|
|
|
LATE MODEL BRIDGEPORT MILLING MACHINE 2 HP 48" TABLE FREE SHIP
CALL FOR EMAIL LOADED WITH TOOLING WE ARE INSTALLING A BRIDGEPORT FACTORY POWER FEED AND A BRAND NEW DRO SYSTEM
|
|
|
PDQ Quick Change R8 Tool holder End Mill Machinist Bridgeport Milling Machine
Pdq r8 quick change toolholder arbor and end mill toolholder. See pics actual item. Good threads.
|
|
|
Milling Machine saw blade 30T - 3" x 1/4" x 1" bore
Milling Machine saw blade 30 teeth- 3" x 1/4" x 1" bore
|
|
|
Milling Machine saw blade 36T - 4" x .203" x 1" bore
Milling Machine saw blade 34 teeth- 4" x 7/32" x 1" bore
|
|
|
Milling Machine saw blade 32T - 3.75" x 5mm x 1" bore
Milling Machine saw blade 32 teeth- 3.75" x 5mm x 1" bore
|
|
|
Milling Machine saw blade 50T - 6" x 1/8" x 1" bore
Milling machine saw blade 50 teeth- 6" x 1/8" x 1" bore
|
|
 |