In 
 
Order by: 
Available to: 
Price: 
 - 
$
671
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
300
5d 18h 38m 8s
0 bids
$0 Shipping
Condition: Used
Location: Sarasota,FL,USA
$
478.09
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
671.15
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
14,177.63
Buy It Now
$0 Shipping
Condition: New
Location: China
$
675
Buy It Now
$0 Shipping
Condition: New
Location: China
$
285
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
389.99
Buy It Now
$23.12 Shipping
Condition: Used
Location: Nashville,TN,USA
$
23,348.57
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
CPO Model 321455. List Price: $25.319.99, CPO Price: $21.699, You save: $3.620.99(14% Availability: In Stock, ISO 9001 certified manufacturer, 3-1/8-in ... morebore spindle is supported by two tapered and one ball bearing, Chrome molybdenum headstock gears are hardened. Ground and shaved, Universal gearbox allows inch. Metric, diametral and module pitch threads, no gear change required, Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces, T-slotted compound slide featuring a four-way tool post, One piece cast iron base absorbs vibration allowing heavier cuts, High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground, Removable gap allows up to 23-5/8-in diameter work on 16-in and 27-1/2-in on 18-in, Five position automatic carriage stop increases productivity, Attractive chrome control levers. Dials and knobs complete this impressive package, Overall Dimensions, 48-in x 40-in x 116.5-in(H x W x L) Follow Rest Capacity, 1/2-in- 3-1/2-in, Compound Slide Travel, 5-1/8-in, Maximum Tool Size, 1-in x 1-in, Number of Inch Threads, 61, Cross Slide Travel, 9-in, Number of Longitudinal and Cross Feeds, 122, Spindle Mount, D1-8, Weight, 6.200 lbs. Pre-Wired, 230V, Swing Over Bed, 16-in, Steady Rest Capacity, 3/8-in- 7-in, Swing Through Gap, 25-7/8-in, Spindle Bore, 3-1/8-in, Range of Spindle Speeds, 25- 1.800 RPM, Motor, 7.5 HP. 3 Ph 230V/460V, Width of Bed, 13-3/8-in, Swing Over Cross Slide, 10-in, Range of Cross Feeds, 0.0006- 0.0365 in/rev. Carriage Travel, 55-in, Range of Inch Threads, 1-5/8- 72 TPI, Taper in Tailstock Spindle, MT-4, Spindle Taper with Sleeve, MT-7(MT-5) Tailstock Spindle Travel, 5-in, Number of Spindle Speeds, 12, Range of Longitudinal Feeds, 0.0015- 0.0913 in/rev. GH-1660ZX Lathe with 2-Axis ACU-RITE DRO 200S Installed- 321455, 10-in 3-Jaw Chuck with Top Reversing Jaws, 12-in 4-Jaw Chuck, 12-in Face Plate, 4-Way Tool Post, Follow Rest, Large Capacity Steady Rest, Fully Integrated Coolant System, Full Length Splash Guard and Coolant Syst
$
8,916.59
Buy It Now
Free Shipping
Condition: New
Location: Macon,GA,USA
$
658.32
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
23,179
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
525
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
12,500
Buy It Now
$0 Shipping
Condition: Used
Location: Schaumburg,IL,USA
$
342.99
Buy It Now
$0 Shipping
Condition: Used
Location: Sparta,MI,USA
$
70
6d 9h 23m 2s
0 bids
$7.95 Shipping
Condition: Used
Location: East Northport,NY,USA
$
225,000
Buy It Now
Free Shipping
Condition: Used
Location: Chino,CA,USA
$
937
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
25,000
Buy It Now
$0 Shipping
Condition: Used
Location: New Caney,TX,USA
$
99
Buy It Now
$0 Shipping
Condition: Used
Location: Madison Heights,VA,USA
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Walton,KY,USA
$
35
Buy It Now
$0 Shipping
Condition: New
Location: Nixa,MO,USA
$
650
Buy It Now
$0 Shipping
Condition: New
Location: China
$
19.99
Buy It Now
$4.65 Shipping
Condition: Used
Location: Nashville,TN,USA
$
19,000
Buy It Now
$1 Shipping
Condition: Used
Location: Westbury,NY,USA
$
49,900
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
MORI SEIKI TURRET TOOL BLOCK 80MM x 110MM BOLT HOLE SPACING 1-3/4" BORE Very good used condition. As pictured. Feel free to give us a call at 440-343-4419 ... morefor more information to be sure that these will work for your application. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
$
15,299
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
96.79
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
22,500
Buy It Now
Free Shipping
Condition: Used
Location: Chino,CA,USA
$
299.99
Buy It Now
$28.9 Shipping
Condition: Used
Location: USA
$
299.99
Buy It Now
Free Shipping
Condition: Used
Location: Waterford,MI,USA
$
10
1d 17h 41m 35s
0 bids
$8.4 Shipping
Condition: New – Open box
Location: Cambridge,OH,USA
$
145
4d 8h 42m 35s
0 bids
$87.12 Shipping
Condition: Used
Location: Westminster,CO,USA
$
14.5
Buy It Now
$0 Shipping
Condition: New
Location: Nixa,MO,USA
Untitled Document Free. Fast Shipping Every Business Day! Atlas Press Company 6-inch Lathe NO. 618 Instructions and Parts Click for Our Complete Catalog ... moreManual Description: Number of Pages: 14. This is a reproduction. Not a photocopy, of an Atlas 6" Lathe NO. 618 Instructions and Parts. This lathe was also sold under the Craftsman brand name. This manual contains information on setup. Lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments. This manual has great information and description of setting up the lathe to a bench. This manual will help you with setting up and running an Atlas Lathe. Contents: Identification and Safety.1.2 Leveling and Mounting.3.4 Gear Clearance.5 Wiring Instructions.6 Lubrication Chart.7 Unit Assemblies.8 Carriage and Compound Parts Diagrams.9.10 Headstock Parts Diagram.11 Lead Screw. Change Gears, Gear Guard and Lathe Bed Parts Diagram.12 Countershaft and Tailstock Parts Diagram.13 Threading Chart. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thi
$
98.5
Buy It Now
$35 Shipping
Condition: Used
Location: Pomona,CA,USA
$
150
Buy It Now
Free Shipping
Condition: Used
Location: Nashville,TN,USA
$
24,723.85
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
225.95
Buy It Now
$18.5 Shipping
Condition: Used
Location: Williamston,MI,USA
$
104.99
3d 6h 14m 34s
0 bids
$10 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,190
Buy It Now
$0 Shipping
Condition: New
Location: China
$
25,500
Buy It Now
$0 Shipping
Condition: Used
Location: Schaumburg,IL,USA
$
670.01
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
125
Buy It Now
Free Shipping
Condition: Used
Location: De Witt,IA,USA
This is a very nice headstock assemble. For a Atlas/Craftsman 12X36 metal lathe(model# 101.07403 and others) The casting has been completely stripped ... moreand is ready for paint to match your lathe or for a restoration project. All the parts have been removed, cleaned and inspected. The bull gear and small back gear are in excellent condition and look to be unused, as dose the pulley. The spindle gear has some slight visible ware to it, but is still in good working order. The bearings are in excellent condition and runs smooth. Comes with two oil cups, original switch and plate and nice“Craftsman“ badge. Shipping weight is 30lbs.
$
474.69
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
66.99
3d 6h 14m 34s
0 bids
$50 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
14.95
3d 13h 57m 26s
0 bids
$4.75 Shipping
Condition: Used
Location: USA
$
150
Buy It Now
Free Shipping
Condition: Used
Location: De Witt,IA,USA
This listing is for a Craftsman Lathe Atlas craftsman 6" Metal Lathe Model 618- 101 BED WITH FEET AND CARRIAGE GEAR Craftsman 6" Model 101.21400 ... moreClick on"Lathe" in my store for more parts. NO CRACKS OR WELDS. Wait for invoice before paying. If you want combined shipping. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. I leave feedback as soon as the buyer does! You'll need to do your own research on your specific application. keep us in your favorite seller file and watch frequently for parts as they come up. If you have any requests. We can check it out for you. So, watch for these items coming in the near future. We will combine shipping for multiple auctions won. Message me with any questions. THAT IS THE BEST WAY TO GET A HOLD OF ME. Good Luck and Happy Bidding! SELLERS TERMS AND PROCEDURES We will e-mail winners within 24 hours of the winning bid and an invoice. Upon payment. We will then ship the item(s) within 3 business days. We would also ask that you e-mail us after you receive your shipment to let us know that it was received satisfactorily and them please leave us feedback and we will do the same for you. Buyer pays all shipping costs. PayPal via checking account or paypal account.
$
20,909.89
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
5,100
Buy It Now
Free Shipping
Condition: Used
Location: Mexico
$
281.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
325
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
117.5
Buy It Now
$0 Shipping
Condition: New
Location: China
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
109,500
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
$
29,900
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
$
129,500
Buy It Now
Free Shipping
Condition: Used
Location: Sanford,FL,USA
Brand New. Just pulled off pallet May 30 2013, never been hooked to power or air. We are replacing them with a different machine. This auction does include ... morethe BAR3010SS Bar feeder. It has liners from.375" through 2.75" The feeder itself will handle 3" bar stock. Buyer pays all shipping. We also have a DS30SSY and a VF2TR for sale.
$
750
Buy It Now
$0 Shipping
Condition: Used
Location: Asheville,NC,USA
This is a Clausing Colchester 17" Lathe Apron Gearbox. It is used but in working condition. The half nut threads are nice. SHIPPING: $80.00
$
769.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
94.99
3d 6h 14m 34s
0 bids
$20 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
692.79
Buy It Now
$0 Shipping
Condition: New
Location: USA
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
 In 

Past Items  
 
MINI LATHE THIS AUCTION IS FOR A 7" X 10" MINI LATHE FROM CENTRAL MACHINERY. MODEL# 33684. THIS IS IN EXCELLENT CONDITION AND IN PERFECT WORKING CONDITION. THIS WAS ONLY USED FOR A SHORT PERIOD OF TIME, AND IS IN EXCELLENT CONDITION. THIS IS A VERY HEAVY LATHE AND WEIGHS ABOUT 70 POUNDS. THIS AUCTION ALSO INCLUDES ANOTHER 28 POUNDS OF EXTRAS. THESE EXTRAS INCLUDE DRILL CHUCKS, WITH KEYS, ASSORTED BITS, EXTRA PARTS, AND EVERYTHING THAT IS PICTURED. LATHE MEASURES ABOUT 24" LONG. NO RESERVE. NO BUY IT NOW, NO INTERNATIONAL SHIPPING. WE WILL SELL TO THE HIGHEST BIDDER! Check out all of our games and movies on EBAY! SHIPPING& HANDLING USA, PLEASE USE SHIPPING CALCULATOR CANADA, NO INTERNATIONAL SHIPPING WE DO NOT SELL illegal bootleg tapes. Copies, screeners, or any type of illegally burned CD's! The movies and games we ... moresell are original and ALWAYS GUARANTEED TO WORK! HAPPY BIDDING On Jun-27-13 at 11:56:50 PDT. Seller added the following information: Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image
96 Tooth change gear from a 9" Atlas Craftsman metal lathe. This gear has a 3/4" ID bore and an ~0.33" thick center hub. My understating is that this is thinner than the center hub on the 10" or 12" lathes but that these gears will also work with those lathes. You might need to fabricated a spacer for that application. These gears are in great condition and show very little wear. Come as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
Tailstock from a 10" Atlas lathe.Only known issue is the quill locking handle has been replaced with a bolt as shown in a couple pics
This is a miscellaneous lot of 5 metal cutting lathe bits. All of them are double-ended. I will describe the bits in the order they are in the first photo starting at the bottom. The one on the bottom is the longest one and is 3 1/4" long and says TRW Hi-Speed 3/8 USA on it. The next bit in the photo is 2" long and says KEO HS#3 on it. The next one is 2" long and says NION 3 HSG 8 on it. The 4th bit in the row is 2 1/8" long and says DoALL No 4 HS Ring Seat. The smallest bit(at the top of the photo) is 1 1/4" long and doesn't have any writing on it. These bits are hardly used at all. If you have any questions, feel free to ask. If you want to see more photos, just tell me what you would like to see closer and I'll do my best. I combine shipping on items purchased together so send me an email if you buy more ... morethan one item so I can send you the correct invoice. Happy shopping! Payment for this item is expected within 3 days. On the fourth day of non payment, an Unpaid Item Case will be opened.
CARBOLOY PROON-20-8 METAL LATHE INDEXABLE TOOL HOLER PRISTINE CONDITION. 1 1/4 X 10" This will ship USPS Priority and arrive within 3 days of shipping. I have lots of tooling listed this week at NO RESERVE and will alway combine lots for the best shipping value. Thanks For Looking.
Change gear spacer or sleeve for an Atlas 618 or Craftsman 101 series lathe. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! F04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f8d594c32-0xf5-
USED SOUTH BEND 9" LATHE CROSS SLIDE. INCLUDES GIB AND NUT Any Questions Please Feel Free To Ask. Thanks. Check out my!
USED SOUTH BEND 13" LATHE CROSS SLIDE. INCLUDES GIB AND NUT Any Questions Please Feel Free To Ask. Thanks. Check out my!
USED SOUTH BEND 9" LATHE REVERSE TUMBLER. INCLUDES WRENCH AND MOUNTING BOLT. Any Questions Please Feel Free To Ask. Thanks. Check out my!
THE TOOL SHED For sale I have a VR/Wesson SBTR-85-H- Metal Working Lathe Carbide Tool Holder. Hold is used and in excellent working and cosmetic condition. Holder is 1" square and accepts square carbide bits. SHIPPING: Shipping Weight is 4-lbs. estimated) International Shipments will incur a $5.00 handling fee and we can ship anywhere in the world. We will combine shipping on multiple orders. Local pick up is always available and is highly encouraged! All items will be shipped within 3 business days of payment. We reserve the right to ship UPS or USPS. FREIGHT– For items requiring freight shipping(150-lbs +) we do charge a disassembling. Crating, palletizing, and shrink wrapping fee dependant on the item. Setting up freight shipments is the responsibility of the buyer. PAYMENT: Prompt payment expected within 5 days unless alternate arrangements ... moreare made. Buyer to pay with PayPal MasterCard and Visa are also accepted at our store. For credit card payments. Please call(518) 393-0056 M-F 11:30-4:30(EST) If payment is not received within the time frame allotted and no contact is made by the buyer. We reserve the right to cancel the transaction and relist the item. ABOUT US: We are a family owned and operated business. Buying and selling used and new tools since 1976. We deal with all sorts of tools and have a 4000 sq. ft. store packed to the roof full of hundreds of thousands of tools. With an inventory that is changing daily, our philosophy is that no tool should be discarded. Whether you are looking for machinist, woodworking, landscaping, or any other tools, if you don’t see it on our eBay store chances are we have it! All are welcome to come visit our store and inspect our inventory and current eBay items, our store hours are Monday– Friday 11-5, and Saturday 9-5. For dependable and quality tools: The Tool Shed The Tool Shed 416 Duane Ave Schenectady. NY 12304(518) 393-0056 Check out the rest of our eBay store at: The Tool Shed NY Shelf location: 8
Original 48 tooth change gear for a 10" or 12" Atlas or Craftsman lathe. 3/4" bore. Double 3/16" wide keyway, outer diameter is 3 1/8" Teeth are 3/8" thick, center hub is 1/2" thick. In good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original 64 tooth change gear for a 10" or 12" Atlas or Craftsman lathe. 3/4" bore. Double 3/16" wide keyway. Teeth are 3/8" thick, bore is 1/2" thick. 4 1/8" outer diameter. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original 52 tooth change gear for a 10" or 12" Atlas or Craftsman lathe. 3/4" bore. Double 3/16" wide keyway. Teeth are 3/8" thick, bore is 1/2" thick. 3 3/8" outer diameter. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Original 20 tooth change gear for a 10" or 12" Atlas or Craftsman lathe. 3/4" bore. 1 3/8" outer diameter, double 3/16" wide keyway. Teeth are 3/8" thick, center hub is 1/2" thick. All in good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13f8e836130-0xfe-
The following auction is for a Original South Bend 9" Metal Lathe Complete Apron Assembly with Split Half Nuts The split half nuts are in fine condition. The handwheel turns fine and the gears are in fine condition with some wear. The spring on the oil cup is disengaged. The apron has some light surface rust in places. See pictures. It is o ff of a South Bend 9" Metal Lathe Sold as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 1 8.00 for USPS Priority Mail shipping with Delivery Confirmation within the United States. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
Very Nice- Complete original banjo change gear bolt bushing assembly for a 10" or 12" Atlas or Craftsman lathe. Assembly includes bolt. Compound bushing, sleeve, washer, spacer and nut. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice Original Yokey for an Atlas Craftsman 10" metal lathe. Part Number 9-59. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL REVERSE GEAR CASE CASTING. VERY SOLID UNIT WITH NO BEAKS OR CRACKS. LEVER STOPPING TABS ARE INTACT. PART NUMBER 9-27. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
3) i believe shop made boring bar holders.Well made though.armstrong no.00B boring bar holder with wrench.armstrong no.15 universal left or right tool holder with wrench.armstrong no.0 left tool holder.armstrong no.00T threading tool.williams no.030R cut off tool holder with brand new cut off tool
Here you have an original piece for a vintage craftsman lathe. Good condition with original paint. Does NOT include mounting hardware(clamp. Bolt or spring)
M6-396 Follow rest for Atlas-craftsman 6" Lathes-as shown. AAt the least excellent condition-probably unused. Please ask all? before bidding. I have the lathe listed and am also listing several tooling pieces all in at least EXCELLENT CONDITION Thank You
Up for auction is a 1948 Montgomery Wards Powr-Kraft metal lathe. The lathe comes with a quick change gear box. It also comes with all the tooling pictured. A complete set of gears, as well as a operators manual with parts list. I have owned this lathe for about a year now it is my second Powr-Kraft lathe and have upgraded to a larger WWII vintage lathe. Everything works as it should and is still fairy tight considering it is a 65year old machine. There are a couple of issues 1) 2 of the gears on the quick change box have been repaired both of them are the quick change handle. I was going to replace them and have one of the NEW gears from Logan but didn't buy the other one. 2) the bearings in the head might need to be replaced in the next couple of years depending on use. One of the nice things about these lathes is that you can still ... moreget parts for them new from the manufacturer. If you have any questions on this lathe feel free to ask. This lathe is being listed as pick up only. I will help load it on your trailer. Understand this thing is heavy about 300+Lbs as it sets. Winning bidder will pay $150 at checkout the rest in cash at pick up. Winning bidder will need to pickup lathe within 10 days of checkout. Unless other arrangements are made. Posted with
DESCRIPTION: PICK UP ONLY. USED. CRAFTSMAN ATLAS 6" METAL LATHE. THE DISTANCE BETWEEN CENTERS IS 19 1/4 APPROX. THE HEADSTOCK HAS A 1X10 SPINDLE WITH NO. 2MT TAPER. THE TAIL IS A NO. 1 MT. NO CRACKS OR REPAIRS. IT RUNS SMOOTHLY. THE MOTOR IS 1/2HP; 115V IT COMES WITH 3 JAW CHUCK W/ KEY; STEADY AND FOLLOWER RESTS AND TOOL POST WITH ROCKER. THE STAND/CART AND CLAMPS IN THE PHOTO ARE NOT INCLUDED. THE BOARD THAT THE LATHE IS BOLTED TO IS INCLUDED. 6% MI SALES TAX WILL BE ADDED TO THE INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; ... moreNO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and In
This is a very nice headstock assemble. For a Atlas/Craftsman 12X36 metal lathe(model# 101.07403 and others) The casting has been completely stripped and is ready for paint to match your lathe or for a restoration project. All the parts have been removed, cleaned and inspected. The bull gear and small back gear are in excellent condition and look to be unused, as dose the pulley. The spindle gear has some slight visible ware to it, but is still in good working order. The bearings are in excellent condition and runs smooth. Comes with two oil cups, original switch and plate and nice“Craftsman“ badge. Shipping weight is 30lbs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f99b2e844-0xf3-
Vintage Metal Lathe Seal Master SRF-16 Stephens Adamson Manufacturing Co. Machine does turn on when plugged in but don't know how well it operates Moving and downsizing Local pick up only in Collingswood. NJ or arrange for your own shipping ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f99b2e5ec-0x102-
BILLINGS ADJUSTABLE BENT TAIL LATHE DOG. 2" WIDE 1" OPENING. Good working order. This will ship USPS Priority and be delivered within 3 days of shipping. I also have a large amount of machine related tooling up for bid at NO RESERVE and will always combine lots for the best shipping value. Thanks For Looking.
6 Collets Sizes 1/16" 1/8" 1/4" 5/16" 3/8" 7/16" Length 2.719" Body Diameter.649" Key 1/8" 646" 26TPI RH One of the plastic caps is cracked. P lease visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
Beautiful machine. Came from a university lab where it just wasn't used much. Extremely well tooled; taper attachment. Steady rest, follower rest, 6" 3 jaw chuck, 9" 4 jaw chuck, tailstock drill chuck, parting tool boring bars, knurling tool left, right and straight tool holders, rocker tool post. 3 phase, but has a static phase converter included. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f9b705c16-0xe8-
2 1/4" 8 TPI Plain Back Threaded Nose Metal Lathe Chuck Adapter 5" Diameter Click to Enlarge Click to Enlarge Click to Enlarge This is a good quality adapter plate. No chinese junk here. Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a Monarch 12 ckk metal lathe. Tag states 14.5" actual swing and 30" center to center. Outfitted with a coolant pump. Includes a 3 jaw chuck. A rockerfoot tool post, and several cutters both carbide and high speed steel. Machine is in good condition. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TAILER. MACHINE WEIGHS APPROXIMATELY 3500 LBS FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 250-400 DOLLARS. BUT YOU MUST CONTACT US FOR AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, ... moreBUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
This is an Atlas milling attachment for their 10- 12-inch lathes that has been adapted to fit a 10-inch Rockwell/Delta lathe. I adapted this attachment when I replaced my Atlas lathe with a Rockwell and discovered that Rockwell didn't make a milling attachment for their 10-inch lathe. Photos 8 and 9 show it attached to my 10-inch Rockwell. Note that there are no degree marks on the adapter plate- you'll need to do the Y-axis setup with an indicator or angle blocks. I used it for years(until I got a milling machine) and it works very well. It is in good condition except for the vice portion which has suffered at the hand of an unskilled/uncaring previous owner(see photos) The damage doesn't affect the operation. It is missing one nut for a gib screw but is otherwise complete. It may be returned to use on an Atlas lathe by removing ... morethe adapter plate- included are the Atlas clamping bolts and pins. Photo 10 shows a standard Atlas base for comparison. While I have been a buyer on ebay for years. This is my first attempt at selling. Please look at the photos carefully and ask questions before bidding. Shipping to U.S. only.
metal lathe thread dial.was installed on a south bend 9" junior lathe.looks to have been installed but possibly not used or not much.I.M not sure of the make but dont believe it's south bend.
2) tailstock chucks.1 is a jacobs the other is a rohm made in germany.6)taper adapters.5) 2MT dead centers.1) straight shank center.3 1/2" 2MT crotch center.1) straight shank spring center
5c collet chuck. Horizontal/vertical fixture, rack, and 23 collets. Various brands. Most threaded in/out some only out. Will include an old weight to make a new backing plate out of to make it run perfectly on your lathe or you can purchase one somewhere else. Rack will be disassembled for shipping. I am pretty sure you can put 4 nuts and bolts back together. If not ask for invoice with more shipping and I will leave it together. Posted with
Original part in good working order for Craftsman 109 metal lathe.
Original part for Craftsman 109 metal lathe.Good condition.
Original independent 4 jaw chuck for Craftsman 109 in good working order.
See pics of toolpost and Williams wrench. 4x4x3.75 opening is approx:2x1.25d Indexable tool holder NOT included UNLESS you Buy It Now and receive the valenite tool holder seen in last 2 photos! Posted with
Machinist's compound cross slide. Don't know much about it but it appears to be in good working condition. No reserve Posted with
Follow rest for 10" southbend. Fits the bed of my heavy 9 but is taller than it. Also have a steady rest listed that fits same size lathe buy both and save on shipping. Always check my other listing for more great stuff. Posted with
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! USED13" South Bend Lathe. Headstock L00 Spindle. Hard to find. Removed from a working machine. Missing one cap screw see pictures threads are perfect just missing the screw. THANKS. Any Questions Please Feel Free To Ask. Thanks. Check out my!
aims RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Rivett Lathe& Grinder Co. of Boston. Mass. This is a Precision Belt-Driven Metal Bench Lathe in working condition. Model# 918 Serial# 1240 Features: Cross Slide. 6-Station Turret. Lever Action Tailstock. Steady Rest. 8-1/2" Faceplate. Lever Action 5C Collet Closer. Coolant System. All Accessories Shown. Specifications: Swing: Swing Over Bed: 9" Swing Over Cross Slide: 4" Swing Over Compound Slide: 1-1/2" Capacities: Distance from Floor to Center: 44-1/2" Distance Between Centers: 18" Spindle: Spindle Mount: L00 Spindle Taper: 5C Spindle Bore: 1-1/8" Number of Spindle Speeds: 8 Range of Spindle Speeds: 150 ... moreto 3.500 rpm. Carriage: Cross Slide Travel: 5" Compound Rest Travel: 5" Tailstock: Spindle Travel: 3-1/2" Taper of Center: 2 Morse Taper Spindle Diameter: 1-1/8" Bed: Width of Bed Face: 3-5/8" Length of Bed: 31-3/8" General: Motor: 75/375 Horsepower. 220 Volt, 1,135/560 RPM, 60 Hz, Three Phase Electrical: 220 Volt. Three Phase Overall Dimensions: 57" x 25" x 52" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 RIVETT 9" x 18" PRECISION BELT-DRIVEN METAL BENCH LATHE- 918 RIVETT 9" x 18" PRECISION BELT
Steady rest from a southbend 10" lathe. Posted with
Welcome to my site! Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Item is in great condition. Wears old blue paint on the underside. Comes exactly as shown with what is shown. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is to get items out safely. But also as cheap and as quick as possible. I have a great shipping record and take my shipping seriously! If you have any questions. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is ... morereceived. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
The following auction is for a Craftsman Sears 6" Model 109 Metal Lathe Spindle Bushing Adjusting Nut Atlas The adjusting nut is in fine condition with some wear. It works fine. It is off of a Craftsman 6" Metal Lathe Model 109.21270 See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me for shipping cost before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
THE TOOL SHED For sale I have a Armstrong Chicago No. 2L- 1/2" Metal Lathe Tool Holder. Hold is used and in excellent working and cosmetic condition. Holder accepts a 1/2" square cutting tool. SHIPPING: Shipping Weight is 3-lbs. estimated) International Shipments will incur a $5.00 handling fee and we can ship anywhere in the world. We will combine shipping on multiple orders. Local pick up is always available and is highly encouraged! All items will be shipped within 3 business days of payment. We reserve the right to ship UPS or USPS. FREIGHT– For items requiring freight shipping(150-lbs +) we do charge a disassembling. Crating, palletizing, and shrink wrapping fee dependant on the item. Setting up freight shipments is the responsibility of the buyer. PAYMENT: Prompt payment expected within 5 days unless alternate arrangements ... moreare made. Buyer to pay with PayPal MasterCard and Visa are also accepted at our store. For credit card payments. Please call(518) 393-0056 M-F 11:30-4:30(EST) If payment is not received within the time frame allotted and no contact is made by the buyer. We reserve the right to cancel the transaction and relist the item. ABOUT US: We are a family owned and operated business. Buying and selling used and new tools since 1976. We deal with all sorts of tools and have a 4000 sq. ft. store packed to the roof full of hundreds of thousands of tools. With an inventory that is changing daily, our philosophy is that no tool should be discarded. Whether you are looking for machinist, woodworking, landscaping, or any other tools, if you don’t see it on our eBay store chances are we have it! All are welcome to come visit our store and inspect our inventory and current eBay items, our store hours are Monday– Friday 11-5, and Saturday 9-5. For dependable and quality tools: The Tool Shed The Tool Shed 416 Duane Ave Schenectady. NY 12304(518) 393-0056 Check out the rest of our eBay store at: The Tool Shed NY Shelf location: 8
The Home Machinist's Handbook by Doug Briney. 1983 Interesting book with lots of diagrams and detailed photography. Nice condition- gently read. All pages are intact with a tight binding. Very minor shelf wear on back cover. Photo is of actual book. From a smoke free home.
Used but almost new condition. Used rarely and only with plastics and aluminum. Slightly smaller than the current Microlux( model which sells for $790. The spec and capabilities are almost the same apart from having a 2in shorter distance between centers. Comes with all original accessories(chuck. Tailstock, dead center, basic cutting tool set, adjustment tools, change gears for screw cutting, manual etc) plus I'm including in the sale: Tailstock Chuck. MT2(on machine and currently $35.50) Tool Rest and Spur Driver(never used and currently $49.50) Follower Rest(never used and currently $35.65) Steady Rest(never used and currently $39.95) I also have a tool bundle and digital readout add-on available on other auctions.
Various Lathe Tail Pieces. AS IS. Couple of these I dont even know what they are for. LOL Please verify Shipping BEFORE Bidding or Buying. I ONLY ship UPS
SHIPPING to USA 48 states only for the stated shipping price. Shipping will be terminal-to-terminal. That means you will have to go to your local trucking terminal to pick it up. No charge for pick up in Vista CA 92083 to see a slide show of 28 pictures of this lathe. Or just scroll through the pictures below. This auction is for the Atlas Clausing model 10100 as shown. Includes motor. Motor pulley, drive belt, and a bunch of other accessories as shown below. Everything in the slide show photos is included. Thanks for looking!
North Carolina North Carolina Choppe Shoppe&Collectables Here's another great deal from: The Choppe Shoppe! This auction is for 2 used thread cutting tool holders with the thread cutting blades on them. One is a Armstrong No 51 with a 1 1/4 icnh tall and 1/2 inch wide shank and a smaller Craftsman No 2031 with a 3/4 inch tall by a 5/16 wide shank. The big one looks like it has never been used. The smaller one has some light use. Both are in very good condition. Don't miss this deal! The EBay shipping calculator is not accurate so please ask about shipping costs before bidding. I only charge what it costs me and I don't add a handling charge. Make sure you ask whatever questions you have before you bid on it. Need more pictures? Ask. Sorry no returns. Don't wait until the last minute to bid on this listing. Or enter an ... moreamount lower than what you are willing to pay! A lot of times my auctions end early because the item sells before the auction ends or someone misses the end of the auction. I ALWAYS get e-mails from people stating that they wanted the item but missed the ending. I have this item for sale locally also. So I reserve the right to cancel this auction at any time if I get a deal somewhere else. However, If there are bids on this item on Ebay. I will not end the auction early and will honor the bids. So if you want it. Do not wait until the last minute to bid or enter an amount lower than what you are willing to pay. Please check out my other auctions and visit my EBay" page to find out about the other items and services I have to offer. Buy with confidence! If the item is listed incorrectly or is in unusable condition I will refund your money including shipping. I stand behind whatever I sell. I try my best to offer good quality items. But I am human(some would disagree) and I do make mistakes. I am not a large company. Nor do I have a big shop. I am just one person trying to make ends meet, part time. I f you change your mind or you made a mistake buying an item I listed. I'
Welcome to my site! Up for auction is a 4 Jaw Craftsman Chuck off a 6" Craftsman Sears Roebuck& Co. 109.20630 Metal Lathe There's some damage-please see item description and photos Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Unfortunately. The chuck has some damage. All of the keyholes have damage to the threading inside. The bottom threads are still intact, but the sides in each have been stripped/chipped. The jaws still move in and out and hold. When all the jaws are closed the tops are not completely flush and there are some nicks and scratches on the tops of the jaws. Please see photos. I tried to capture all of this in the photos, but it was difficult. The insides of the jaws(where they meet the work) look good. The rest of ... morethe chuck looks pretty good. There are a few small scratches and nicks here and there. The threading where the chuck mounts to the headstock looks good. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 1 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in cont
Late Model Atlas Craftsman Commercial 12" Metal Lathe WIPERS OILERS All wipers show wear and tear. One needs to be bent back into shape. Felt is in fair usable condition. The last pic shows the damage to the wipers. Item includes everything in the pics. Please ask questions. Posted with
Here for your bidding is a South Bend Model A Apron assembly!The parts and gears all have been cleaned and inspected. They look good, all function properly and smooth.the parts have been striped of all paith and old gunk ready for your choice of color and grease. some lubricant has been applied to prevent rust.also the handle in the assembly was welded and soon i will have the replacement for sale also here in EBAY.the weld was done professionally and it is strong as the solid piece was.SOLD AS IS NO warranties.
Hello.This listing is for a real nice lot of what I believe are mostly burnishing tools. Most are nice polished tools with different degree bent tips. One has the brand name REMBRANDT on it. Another has the name Osborne(may be a leather working tool) One is a triangle shape.3 sides almost like a bearing scraper. I don't really know all too much on these tools. They came from the specialized tools of a musical instrument repair shop.
Here is a Wholesale Tools(Tida) TD-4A Bench lathe This is essentially the same as a Enco/Jet 1024 It was made by Tida for W.T. in Taiwan. So it's considerably better made than it's Chinese counterparts. It has a quick change gear box for threading. Power apron/cross feed, cam-lock tailstock, thread cutting dial and hardened ways. Comes with chip pan. 8" back plate, 5" 3-jaw chuck with reversible jaws, 6" 4-jaw precision chuck with reversible jaws, drill chuck for tailstock, Steady rest, tool post wrench, tool box with several tools and bits,2 dead centers, reprinted operation manual and parts list. Swing over bed = 10" Swing over saddle = 5" Distance between centers = 24" Hole through spindle = 1- 3/8" Spindle thread = 2-1/4- 8TPI Spindle nose taper = MT#5 Tail center taper = MT#2 Spindle speeds ... more= 12 Lead screw = 7/8" 8 TPI Motor = 1 HP- Wired for 110VAC. Can be 220VAC Weight = Approx 600lb I also have a Bison precision 8" 3-jaw chuck with reversible jaws that can be sold with the lathe for $300.00 more. This chuck is in very good condition. And sold new for over $800.00 shipped. This chuck is NOT included in this auction, but will be available upon pickup of the lathe. This lathe is in very good condition with exception to a chip in the center way. That the tailstock rides on. This chip is very close to the headstock, and in no way affects the saddle or tailstock travel. You can see it in the first pic. It's a very powerful and smooth running machine. You can still buy parts for it from Jet. Grizzly or Enco. This will be available for LOCAL. Pickup only. I will not ship it anywhere. I will load or assist loading the unit onto your truck or trailer for free. I can also deliver the unit to you for an extra cost. But only to buyers within 60 miles of my location, and only after all payments are made. Cash or PayPal only. I prefer cash over PayPal if possible. No Checks or money orders. Buyer agrees to pay in Cash or PayPal within three business days from the
VINTAGE Machinist Cleveland Lathe Metal Working Mill Tool Holder Rest Set Thanks for viewing my items Low Starting Bid with No Reserve.
I believe this to be off a 12" lathe from google searches. But am not entirely sure. This includes all that is seen in the picture. Pulley spins freely. Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! Everything is pre-packaged and ready to go. I'm just waiting on you to buy it so I can slap an address label on it and get it out the door.UNLESS you need combined shipping. Combined Shipping Discounts: I will gladly combine shipping to offer discounts. Expect to pay a 1 time handling fee of $2.00 per box(not per item) Then actual shipping. Combined shipping takes a couple extra days to process. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak ... morefor the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
Vintage Metal Lathe- Craftsman. Model 109-21276. Made In USA. Clean.No rust. Tailstock has a dead center quill and locking handle that does not appear to be stock. This lathe would be a good candidate for restoring,repair/use,for parts. Lathe is offered in as is condition. I have made an honest and f of this item, but I am only human. I do miss things occasionally, and if things is not as I have represented it, I certainly will do what I can to make it right. Please remember when buying vintage or used items,they have had a life before they reach you. Items will always have some wear and will rarely look new. Please look at all pictures and ask any questions before bidding I reserve the right to change mail carriers.I pack all packages very carefully and as lightly as possible. I ship whichever postal method is the least expensive for each ... moreindividual package and I will combine shipping for discounts so please check my listings to get the most bang for your buck! Most packages ship the next day after payment but please allow 2 days as my schedule is unpredictable and if you are in a hurry please tell me and I will make a point to get it out the next day. I report ALL NON PAYERS so if you are not going to pay.don't buy. If you have a problem and need more time, please ask as I will work with you, but deliberate non payer sand non communicators will be reported. I welcome ALL INTERNATIONAL buyers but please be aware of a couple things.I usually ship Priority International,however insurance is not available with this service nor is tracking once it leaves the United States. Also please be aware of your country's Duty Regulations as to what is allowable in your country and what the possible duty fees are as this is not covered in your purchase price.
Atlas Craftsman 10" lathe 10-326 heavy duty Steady Rest GREAT SHAPE. I prefer to ship out by U S post office. You need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail. Thank you! CHECK OUT MY OTHER LISTINGS*
cut-off tool holder for a Fims quick change tool post.i will only charge actual shipping to your zip but am quoting med flat rate to play it safe
lamp AUCTION MID MOD SPECIFY PAYMENT METHOD WHEN CHECKING OUT SO WE DON'T QUESTION DELAY IN PAYMENT vintage BRASS OR BRONZE metal lathe that I purchased at a local auction. You're getting it in the condition I found it. There are no accessories other than what's shown in the photos. There are photos posted so be sure to look at them all. THE RAILS ARE STEEL BUT MOST OF THE REST HAS A GREEN/GRAY/OXIDIZED PATINA I'm not knowledgeable about lathes but if you have any questions. Feel free to ask. I do accept Paypal also. Payment is due within 3 days of winning item(s) Notify immediately if paying by other means. COURIER DELIVERY TO PARTS OF PA. VIRGINIA, NEW YORK, NEW JERSEY, MARYLAND, AND CANADA MAY BE ARRANGED. ASK FOR PRICING BASED ON YOUR LOCATION We reserve the right to ship via most efficient carrier. We pack as carefully ... moreand safely as possible. In the highly unlikely chance that your item gets broken in transit refunds will be via the shipping insurance If the item arrives with clear damage due to shipping, please notify us immediately so that we may start the process of an insurance claim. Pictures will be necessary, The return process must be initiated and we must be notified within 3 days of your receipt of the item. If this does not happen a return will not be accepted. Please keep all packing materials for the shippers inspection. In general. All items sold are VINTAGE items. Absolutely every effort is made to accurately describe the item both in the description and the photos that accompany the auction, We welcome questions and are happy to provide additional information and/or photos for clarification. Items are sold as-is and as-found; returns will be considered only if item is materially different than representation. FOR INTERNATIONAL BUYERS, BESIDES THE SHIPPING FEE You are responsible for any and all customs charges, taxes or tariffs your country may charge.
YOU ARE BIDDING ON A HARDINGE MANUAL LATHE IN GREAT CONDITION! This HARDINGE lathe is a very solid 6" swing lathe great for hobbyists. You can not thread on this lathe. HARDINGE make some of the best CNC lathe machine today but this rare. Hard to find manual lathe is great for turning any material and will be a great addiditon to any shop! 6" SWING LATHE WOODEN TABLE TOP WITH CAST IRON LEGS ALL ORIGNAL WRENCHES TAIL STOCK A BOX OF GOOD BITS MULTIPLE TOOL HOLDERS This Lathe comes with a lot of extras and all needed tools for proper machining! BUYER IS RESPONISBLE FOR SHIPPING COSTS. 1$ IS SHOWN FOR SHIPPING BUT THIS IS NOT THE COST OF SHIPPING. WE LIST ONE DOLLAR BECAUSE WE HAVE TO SHOW A PRICE TO LIST AS AN AUCTION. IT IS THE BUYERS RESPONSABLITIY TO ARRANGE SHIPPING AND PICKUP. WE SUPPLY THE LATHE AND EVERYHTING ELSE ON A PALLET ... moreWRAPED WITH SIRAN WRAP. I WILL SEND THE BUYER A PICTURE OF THE PACKED UNIT SO YOU KNOW WHAT TO EXCPECT. LOCAL BUYERS CAN PICK UP FROM US WE HAVE A FORKLIFT AND WILL LOAD PALLET ONTO ANY TRUCK OR TRAILER. THIS UNIT WEIGHTS AROUND 450LBS INCLUDING ALL PARTS AND SKID ASK ANY QUESTIONS YOU MAY HAVE Posted with
ATLAS CRAFTSMAN DUNLAP 109 6" METAL LATHE 40 TOOTH CHANGE GEAR(M6? Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $3. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings!
YOU ARE BIDDING ON A LIKE NEW GEARED SEARS ATLAS METAL LATHE! This sears lathe is one of the tightest lathe that I have ever used. This lathe is a geared lathe which is great for cutting threads and changing auto feed speeds. All ways are tight and absolutely no slop on the carriage. All functions work great and this will be a great addition or start to any shop! This 12" swing sears lathe come with the following: GEARED 12" SWING LATHE ORIGINAL BASE LEGS WOODEN TABLE TOP FORMED GALVANIZED SHEETMETAL CHIP TRAY ALL ORIGNAL WRENCHES QTY2 STEADY RESTS TAIL STOCK A BOX OF GOOD BITS MULTIPLE TOOL HOLDERS MULTI TOOL HOLDER This Lathe comes with a lot of extras and need tools for proper machining. BUYER IS RESPONISBLE FOR SHIPPING COSTS. 1$ IS SHOWN FOR SHIPPING BUT THIS IS NOT THE COST OF SHIPPING. WE LIST ONE DOLLAR BECAUSE WE HAVE TO ... moreSHOW A PRICE TO LIST AS AN AUCTION. IT IS THE BUYERS RESPONSABLITIY TO ARRANGE SHIPPING AND PICKUP. WE SUPPLY THE LATHE WITHT HE LEGS TAKEN OFF AND EVERYHTING ON A PALLET WRAPED WITH SIRAN WRAP. I WILL SEND THE BUYER A PICTURE OF THE PACKED UNIT SO YOU KNOW WHAT TO EXCPECT. LOCAL BUYERS CAN PICK UP FROM US. WE HAVE A FORKLIFT AND WILL LOAD PALLET ONTO ANY TRUCK OR TRAILER. THIS UNIT WEIGHTS AROUND 550LBS INCLUDING ALL PARTS AND SKID. ASK ANY QUESTIONS YOU MAY HAVE. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13fbc6d7a40-0xfd-
Here for sale is a headstock portion with unbroken oil caps. Good conditon. Includes one of two bearings.
Here for sale unbent spindle with good threads for craftsman 109. Item appears to be in perfect condition except for indentations on the flat area due to set screw tightening which should'nt effect functionality. Original part from 109 lathe.
Original part from 109 lathe appears tonbe in good condition.
Original part from Craftsman 109 metal lathe. Appears in good working order. Never repainted.
Original piece for Craftsman 109 metal lathe. Item is in good condition.
Not repainted part for Craftsman 109 metal lathe 109.20630.
Original part from Craftsman 109.20630 appears to be in good condition has set screw.
For sale is a bench top motor mount for Southbend and other metal Lathes. It is set up for the V-belt type as shown in the photos. It is used and has evidence of use. But it looks useable. It only comes as shown in the photo no extra pieces, also the oil caps appear to be missing and the entire cup could be replaced if that is important to you. I did notice one ding in the large flat wheel but does not appear to affect the performance. It is old. Therefore sold with no returns- it is heavy made of cast iron which is reflected in the shipping price.
Simonds Mo-Max Super Cobalt Metal Cutting 3/4" Tool Bits All pictures are of actual item for sale. gsrx_vers_473(GS 6.4.1(473)
Not a machinist just ended up with this from scrap. Someone should need it. Hope I gave information right. ask if any questions.
Up for auction is a feed reversing lever with gears in good condition. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13fbf14d619-0x106-
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ 17 1/4" long L6-724 excellent condition for atlas lathe clean tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item ... morefor your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
METAL SPINNING for CRAFTSMEN INSTRUCTORS& STUDENTS Reagan Smith Lathe Shop book Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album METAL SPINNING for CRAFTSMEN INSTRUCTORS& STUDENTS by Reagan and Smith. hardcover. no dustjacket. from 1936. pages has some foxing and light staining. Buyer pays $3.00 shipping in US(this is via media rate shipping which can take 10-14 days to arrive) Bid with confidence. I want you to be 100% satisfied with your purchase- Any problems or questions before. During or after the transaction simply send me an e-mail and i'll take care of it. The winner of the auction will be e-mailed soon after the auction ends(If you don't receive my end of auction e-mail from me within 24 hours of auction end, let me know. I answer EVERY ... moree-mail i receive- If you don't hear back from me it's most likely your spam filter blocked my e-mail to you. Payment Shipping Charge is stated in the auction description- Winning bidder e-mails usually go out within a few hours from end of auction. Any questions do not hesitate to e-mail me. Thanks! I accept the following forms of payment: PayPal Shipping& Handling $3.00 USPS Media Mail® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
Vintage 1941 SOUTH BEND How To Run A LATHE Metal Tool Manual Book 41st Edition HOW TO RUN A LATHE- 41st Edition South Bend Lathe Works The Care and Operation of A Screw Cutting Lathe By J.J. O'Brien- M. W. O'Brien Contains 128 pages. Nicely illustrated. Will make a good addition to your vintage tool collection. I ship worldwide. Please contact us for a combined invoice if you purchase multiple items. Click here to add me to your Favorite Seller's List Use the payment button on the auction to submit your payment. We accept PayPal. Contact us if you need other payment assistance. Please contact us for a combined invoice on multiple purchases. THANKS FOR BIDDING. JUNQUEGIRL APPRECIATES YOUR BUSINESS! Inkfrog terapeak. I000000. InkFrog Analytics.
Vintage 1937 ATLAS LATHE Operation& Machinist Tables Metal Tool Manual Book ATLAS Manual of Lathe Operation and Machinist Tables Copyright 1937 by Atlas Press Company Contains 238 pages. Contents include; Care and Construction. Theory of metal cutting, machining of various materials, holding the work, drilling and boring, thread cutting, lathe attachments and their uses, woodturning on the metal lathe, machinst tables, index, pages for your shop notes. Nicely illustrated. Will make a great addition to your vintage tool advertising collection. I ship worldwide. Please contact us for a combined invoice if you purchase multiple items. Click here to add me to your Favorite Seller's List Use the payment button on the auction to submit your payment. We accept PayPal. Contact us if you need other payment assistance. Please contact us for ... morea combined invoice on multiple purchases. THANKS FOR BIDDING. JUNQUEGIRL APPRECIATES YOUR BUSINESS! Inkfrog terapeak. I000000. InkFrog Analytics.
atlas 10" lathe door.Nice chart.came from a 10" lathe with vertical drive.part# 10F-28.There is a crack right below the locking plunger,hard to see.The door structure is still very sound.The crack is maybe 1-1/2" long.I will only charge actual shipping to your zip
Original Atlas Th54 metal lathe counter shaft pully hanger.
Original Atlas th54 metal lathe saddle carriage. 10f-9