In 
 
Order by: 
Available to: 
Price: 
 - 
$
3,600
Buy It Now
$0 Shipping
Condition: Used
Location: Paw Paw,MI,USA
aims CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH ... moreFRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Acra Turn. This is a used Geared Head Gap Bed Engine Lathe in EXCELLENT condition. Model# LC-1340G Serial# 1206 Features: Geared Headstock. Induction Hardened Bedways. Gap Bed. 6" Three Jaw Chuck. 8" Four Jaw Chuck. Phase II Quick Change Tool Post& Holders. Steady Rest. Follow Rest. 8" Fixture Plate. 12" Face Plate. Coolant System. 220 Volt. Single Phase. Inch& Metric Threads. Specifications: Swing: Swing Over Bed: 13" Swing Over Cross Slide: 8" Swing Over Compound Slide: 3" Swing Over Gap: 17" Capacities: Distance from Floor to Center: 42" Distance Between Centers: 40" Spindle: Mount: D1-5 Spindle Bore: 1.49" Number of Spindle Speeds: 18 Range of Spindle Speeds: 60 to 2.000 rpm. Threads: Inch Threads: 4.75 to 72 tpi Metric Threads: 0.25 to 9 mm Module Threads: 0.25 to 3.5 Diametral Threads: 11 to 108. Carriage: Cross Slide Travel: 7" Compound Rest Travel: 3-1/4" Tailstock: Spindle Travel: 4" Taper of Center: 3 Morse Taper Spindle Diameter: 1-9/16" Bed: Width of Bed Face: 7-3/8" Length of Bed: 50-3/4" with 7-1/4" gap. General: Motor: 2 Horsepower. 110/ 220 Volt, 1,700 rpm, 25/ 12.5 Amp, 60 Hz Electrical: 110/ 220 Volt. Single Phase(Currently wired@ 220 Volt, Single Phase) Overall Dimensions: 72" x 30" x 50" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G C
$
454.49
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
3,400
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
49.95
Buy It Now
$4.1 Shipping
Condition: New
Location: Royse City,TX,USA
$
2,799.99
Buy It Now
Free Shipping
Condition: Used
Location: Middlebury,IN,USA
$
14.95
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
4,300
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
170.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
2,650
Buy It Now
Free Shipping
Condition: Used
Location: Baltimore,MD,USA
$
99.99
3d 22h 40m 44s
1 bids
$20 Shipping
Condition: New – Open box
Location: Cambridge,OH,USA
Questions? Call us: 1-877-328-9236. JET GHB-1340 2-Hp 3-Jaw Chuck Geared Head Bench Lathe Steady-Rest 35" Travel. Manufacturer: JET Model: GHB-1340 ... moreCondition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: JET Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This lathe works great. We used this in our shop on various projects and never had a problem with it. No further testing was performed. NOTE: The skates shown in the pictures are not included. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) JET GHB-1340 Geared Head Bench Lathe, 1) Steady Rest, 1) Follower Rest, 3) Dead Centers, 1) 12" Faceplate, Specifications: Manufacturer: JET, Model: GHB-1340, Stock# 321357, SN: 7047741, 2 Hp, 60 Hz, Single Phase, V: 115/ 230, A: 28/ 14, 4 Pole, Class E, 1720 RPM, 6" 3-Jaw Chuck, HeadStock, TailStock, Carriage Travel: 35" Induction Hardened Bedways, Forward/Reverse, 8 Speeds: 70- 2000, 12" Faceplate, SKU: O45L011 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Orders shipped to Texas will incur State Sales Tax at a rate of 7.25% Shipping. This item will be shipped on a pallet via LTL Freight. Please fill o
$
2,850
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
452.89
Buy It Now
$0 Shipping
Condition: New
Location: Memphis,TN,USA
$
1,850
Buy It Now
Free Shipping
Condition: Used
Location: Baltimore,MD,USA
$
453.46
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,100
Buy It Now
$0 Shipping
Condition: Used
Location: Two Rivers,WI,USA
$
15.99
Buy It Now
$0 Shipping
Condition: New
Location: Dayton,OH,USA
Nice Atlas threading dial with bolt and new steel gear.
$
800
Buy It Now
$0 Shipping
Condition: Used
Location: Winter Haven,FL,USA
Untitled Document Free. Fast Shipping Every Business Day! Atlas Press Company 6 Inch Metal Turning Lathe. Model 3950 Click for Our Complete Catalog Manual ... moreDescription: Number of Pages: 16. This is a reproduction. Not a photocopy, of an Atlas 6" Bench Lathe, Model 3950& 10100, which was also sold under the brand name of Craftsman. This manual contains information on setup, lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments. This manual will help you with setting up and running an Atlas Lathe. Contents: INSTALLATION Cleaning and Moving.1 Mounting Lathe.1&2 Mounting Motor.2 LUBRICATIONLubrication Chart.3 CONTROLS AND OPERATION Back Gear Controls.3&4 Changing Spindle Speeds.4 Headstock.4&5 Carriage.6 Tailstock.6 Chucks and Face Plates.6&7 Sequence of Engaging Controls.7 Mounting Work.7&8 Machining.8 Threading.8&9 MAINTENANCE AND ADJUSTMENTS Cross Slide Gib Adjustment.10 Tool Post Slide Gib Adjustment.10 Cross Slide Crank Adjustment.10 Tool Post Slide Crank Adjustment.10 Carriage Gib Adjustment.10 Tailstock Gib Adjustment.10 Carriage Bearing Plate Adjustment.10 Back Gear Adjustment.10 Spindle Bearing Adjustment.10 PARTS INDEX Compound Rest Assembly.11 Tool Post Assembly.
$
400
Buy It Now
$25 Shipping
Condition: Used
Location: Chadwick,IL,USA
ATLAS CRAFTSMAN 12 INCH LATHE COMPLETE QUICK CHANGE GEARBOX ASSEMBLY CONVERSION Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click ... moreto Enlarge Click to Enlarge COMPLETE 12 INCH ATLAS CRAFTSMAN 12 INCH LATHE QUICK CHANGE GEARBOX CONVERSION. FITS ALL 12 INCH LATHES WITH CHANGE GEARS. EASY TO BOLT ON AND GO. THIS UNIT HAS HAD VERY LITTLE USE. GEARS IN GREAT SHAPE AND SHOWS LITTLE WEAR OR USE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
$
49.99
3d 22h 37m 57s
0 bids
$8 Shipping
Condition: New – Open box
Location: Cambridge,OH,USA
This is a carriage stop for a central machine dsl1237 may work on other asian 12 x 26 37 lathes we needed 1 and ended up making a run of them steel construction ... morepainted black w2315 a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14ac2d9e601-0x10f-
$
67
Buy It Now
$27.33 Shipping
Condition: Used
Location: O'Brien,FL,USA
Welcome to my site! Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately ... moreas po ssible through photos and written explanation. This bed is in great condition. There are a few very minor nicks in the ways(please see photos) But they will not affect performance. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
$
10.95
Buy It Now
$3.15 Shipping
Condition: New
Location: Ionia,IA,USA
$
35
7d 23h 52m 49s
1 bids
$14.35 Shipping
Condition: Used
Location: Washington,MI,USA
$
679.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
3,995
Buy It Now
$400 Shipping
Condition: Used
Location: Hayward,CA,USA
$
99
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
1,800
Buy It Now
$0 Shipping
Condition: Used
Location: Deer Park,TX,USA
Nice original 4 step headstock pulley and gear with bushings assembly for a 6" Atlas 618 or Craftsman 101 lathe. Pulley and gear. Part number M6-79. ... moreUnit is also known as part number 2140-10. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e066579e4-0xf6-
$
2,190
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
3,750
Buy It Now
Free Shipping
Condition: Used
Location: Muscle Shoals,AL,USA
$
2,830.73
Buy It Now
$0 Shipping
Condition: New
Location: Cerritos,CA,USA
$
3,500
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
4,340
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
5,490
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
2,327.6
Buy It Now
$0 Shipping
Condition: New
Location: Cerritos,CA,USA
$
197
Buy It Now
$15 Shipping
Condition: Used
Location: Kent,CT,USA
$
2,327.6
Buy It Now
$0 Shipping
Condition: New
Location: Cerritos,CA,USA
$
1,299.99
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
1,759
Buy It Now
$300 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
1,995
Buy It Now
$0 Shipping
Condition: Used
Location: Dayton,OH,USA
$
3,750
1d 21h 13m 42s
0 bids
$0 Shipping
Condition: Used
Location: Youngstown,OH,USA
$
2,200
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
This is a brand new machine in factory packaging with a 1-year warranty! This machine ships via truck freight. Buyer is responsible for unloading. See ... morebelow for details. G9972Z 11" x 26" Bench Lathe w/ Gearbox This is another great starter metal lathe with more capacity than typical benchtop lathes! This specially designed machine is an outstanding value and able to take on light duty jobs requiring a 10-5/8" swing. A 1" spindle bore and 26" between centers. And with a 1 HP motor, you’ll be able to make quick work of even the most challenging jobs. This is an awesome value and a lot of lathe for a hobby machinist! Feeds and threads to the left only. Standard Equipment: 5" 3-jaw chuck with two sets of jaws 6-1/2" 4-jaw chuck with reversible jaws Steady rest Follow rest MT#3& MT#4 Dead centers 4-way tool post Faceplate Tool box& tool kit Change gears Specifications: Swing over bed: 10-5/8" Swing over cross slide: 6-3/8" Distance between centers: 26" Spindle bore: 1" Spindle nose taper: MT#4 Motor: 1 HP. 110V, single-phase Number of speeds: 6 Range of speeds: 150. 300, 560, 720, 1200, 2400 RPM Lead screw: 3/4" x 8 TPI Compound travel: 3-1/2" Cross slide travel: 7" Carriage travel: 23" Maximum tool size: 1/2" x 1/2" Tailstock barrel travel: 2-1/2" Tailstock barrel taper: MT#3 Spindle thread: 1-3/4" x 8 TPI Number of longitudinal feeds: 12 Range of longitudinal feeds: 0.0022–0.0150 IPR Number of inch threads: 24 Range of inch threads: 8–56 TPI Number of metric threads: 10 Range of metric threads: 0.5–3.0mm Overall dimensions: 23" W x 51" L x 19" H Approximate shipping weight: 559 lbs. Comes with chip tray and splash guard! To view the manual and specifications for this machine. Please click the following link: http:cdn0.grizzly.com/manuals/g9972z_m.pdf How Is This Item Shipped? This item ships via truck freight. The trucking company will call you to arrange for curbside delivery. Your delivery address
$
345
Buy It Now
$0 Shipping
Condition: Used
Location: Clearlake,CA,USA
Used in very good condition South Bend lathe steady rest for 10K 10 inch swing lathe.Telescopic type. Main casting is marked PT115K1. Buyer to pay shipping ... moreon 11 pounds. Due to excessive and abusive negative feedback from Canadians. I no longer sell to Canada. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
1,219.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,789
Buy It Now
$300 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
1,595
Buy It Now
Free Shipping
Condition: Used
Location: Providence,RI,USA
$
5,500
Buy It Now
Free Shipping
Condition: Used
Location: Fort Worth,TX,USA
$
15
Buy It Now
$0 Shipping
Condition: New
Location: Hagerstown,MD,USA
$
3,500
Buy It Now
$0 Shipping
Condition: Used
Location: Baldwin,NY,USA
$
444.94
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
5,800
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
99.99
Buy It Now
$0 Shipping
Condition: New
Location: Hopkinsville,KY,USA
$
4,500
Buy It Now
$0 Shipping
Condition: Used
Location: Cottondale,AL,USA
Atlas Craftsman 10" metal lathe Turret in good used condition Please take a minute to browse our store to see what other treasures we might have ... morethis week. I will combine shipping when possible. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. All items are paid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. Please be aware that I ship as soon as payment is received. If you change your mind about the item after it is shipped, I will accept returns but the buyer pays return shipping cost. Refunds will not be issued until I receive item back in resalable condition. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Please do not ask me to mark items with a lower value or mark as a gift. US and international government regulatio
$
1,068.9
Buy It Now
$0 Shipping
Condition: New
Location: Houston,TX,USA
$
880
Buy It Now
$0 Shipping
Condition: Used
Location: Fleetwood,PA,USA
Hello Folks. Today we have Atlas Part# M6-150L a pair of Atlas Legs or Feet for bed. Removed from Model# 618 lathe. Includes the original 6 screws to ... moreattach the legs. Used, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay. ka.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%60wk6%3Eka-13ed673962b-0xf9-
$
1,068.95
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
2,385.94
Buy It Now
$0 Shipping
Condition: Used
Location: Delray Beach,FL,USA
$
902
Buy It Now
$0 Shipping
Condition: New
Location: Memphis,TN,USA
$
3,350
Buy It Now
$0 Shipping
Condition: Used
Location: Costa Mesa,CA,USA
$
6,490
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
2,300
Buy It Now
Free Shipping
Condition: Used
Location: San Bernardino,CA,USA
$
932.43
Buy It Now
$0 Shipping
Condition: New
Location: USA
1 2 3 4 5 6 7 8 9 10 11
 In 

Past Items  
 
Hello Folks. This is an Atlas M-64 Tooth Change Gear, 1/2" Bore fits both Atlas Metal Lathes 618& 101 Models. Good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Hello Folks. Today we have a Lot of 12 Craftsman 6" Lathe Gears, 1/2" Bore, 3/8" Thick. This lot includes: 20, 24, 32, 36, 40, 44, 46, 48, 52, 54, 56, and 64, all are in good condition. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Used metal lathe. Tooling as shown. Table not included. No threading dial. 115 volts. Selling as is. Pick up only. 7% Georgia sales tax
I recently obtained metal lathe related tools and accessories which I will be listing in several auctions. Items include several sets of chuck jaws. Steady rest, tool cutting bits, tool holders, live and dead centers and a vise. These are all for small to mid size lathes. I do not know the make of lathes these items originally came from, many items can fit a variety of different lathes. These items are all used in useable condition showing normal wear and usage. I can combine shipping on most of these items and due to weight I will use USPS flat rate priority boxes to ship if this is the cheapest and items will fit. View photos and measurements provided for condition and to see if items meet your needs. This listing is for the following: This listing is for(6) three jaw sets(18 jaws) for a metal lathe chuck plus several other items. Five ... moreof these sets have similar measurements. Approx. 2 1/4” long, 1” wide and 1 1/8” high with 2 mounting holes and a 1/2” wide slot on base. Three sets of jaws look like they held threaded bolts, but these can be r-cut to fit your needs. The sixth set of jaws is made with gripping/ clamping teeth. There are 6 other items included in lot that look like mini jaws, but I’m not certain what they are. This lot sells without reserve and“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this lot, make a bid. This lot ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it is usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reaso
Description: Here's a Logan 9" 10" 11 Metal Lathe 18 Tooth Change Gear with a 5/8" bore and a 5/32" keyway. This is 7/16" wide and in good used shape. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to ... morelook at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
This is a heavy duty pedestal buffer made by U.S. Electrical Co. It is 3hp 220v 3 phase. The machine is built like a tank with a massive cast pedestal base with door for storage inside. The buffer runs well and has a 1.25" arbor. I have about a dozen or so used buffing wheels that I will include with the machine. Local pick-up is welcome. Shipping is at buyer's expense. I get pretty good freight rates if you are interested. Please contact me with any questions. Thanks, Jared.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e136c4f0d-0xfe-
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Milling Machine Table attachment for small Metal Lathe How-To build PLANS With this attachment you can turn your lathe into a milling machine. Made from a common angle plate. Handy for the small shop needing a milling machine at times. Mounts on the compound. Replacing the tool post. Made almost entirely on the metal lathe, This is an original 2 page magazine article from 1972. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Instructions, SHIPPING TERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority ... moremail service. Add $1.75 to total if you would like insurance with delivery confirmation. $8.00 for shipping to Canada. $10.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
S-50 THREADING TOOL HOLDER Posted with
DESCRIPTION: USED, BORING TOOL HOLDERS. SOME OF THE SHANK SIZES ARE: 1 5/32 X 5/8; 1 X 5/8; 7/8 X 1/2; 13/16 X 1/2. THE AUCTION IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO ... moreNOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA,
The title is not a complete description so please read the ad description. please scroll down and view all the photos. Bidders please read the ad. Welcome to an listing by Best Bay Machinery sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following LEBLOND 18 INCH X 48 INCH CC ENGINE LATHE 3-JAW CHUCK TAILSTOCK S/N 4D1027 14N jacobs super chuck drill holder w/key thru hole Description, LEBLOND 18 INCH X 48 INCH CC ENGINE LATHE 4D1027Webb 16 x 4 0 tool room lathe S/N 4D1027 220 V 3 PHASE WT IS 32 5 0# specifications from manufacturer Subject to verification only: CAPACITY: 1 8" x 48" SWING OVER BED: 1 8" SWING OVER CROSS SLIDE: 10 1/4" DISTANCE BETWEEN CENTERS: 48" SPINDLE HOLE: 1 1/2" TAIL STOCK SPINDLE ... moreDIAMETER: 1 3/4 TAIL STOCK TRAVEL: 5" SPINDLE SPEEDS: 12) 30 TO 1200 RPM CROSS SLIDE TRAVEL: 7 1/2" COMPOUND REST TRAVEL: 3 5/8" FEED CHANGES: 48 FEED RANGE: 0.0018- 0.106 LEAD SCREW DIAMETER: 1" LEAD SCREW PITCH: 6 TPI INCLUDES 3 JAW CHUCK. JACOBS CHUCK ELECTRICS: 220/440 3 PHASE 60 Hz DIMENSIONS: 53" x 36" x 53" 30 00 LBS Item ships from Chicago 60436 Questions email or call Bob 773-392-5055 Please check our store for the best deals on machinery and tooling at our store! Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS
Description: Here's a Cast Iron Wood/ Metal Lathe Bed Clamp thats 3 1/4" x 1 1/2" with 3/8- 16 threads. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) ... moreYou need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
heres a Vintage Craftsman Metal Lathe Model 109 20630 Good Condition Used Condition. Your getting it like its shown in photos, it does not come with a electric motor, if you need details read tag in last photo, it is in good shape u.s. parcel post shipping 45.00
Runs well. Bed ways and feed screw are is great condition. Comes with: extra spindle two step drive pulley belt 4 jaw chuck(the three jaw in the picture doesn't fit and is not included) lantern rocker toolpost tail stock with morse 0 taper size gear cover. not painted, since it has the threading info plate on it. Lathe has been dissasembled. Cleaned, stripped and painted. comes with gears shown in picture. I believe two gears are missing.
good used 3 MT bull nose live center mfg not marked approx dia. 3 1/16" will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
We List 800 to 1000 Items Per Month- to Add Me To Your Favorite Sellers*Up for bid is this EMCO UNIMAT SL Mini METAL LATHE AUSTRIA GUNSMITH WATCH MAKER JEWELER. THIS IS IN VERY GOOD SHAPE TESTED WORKS GOOD YOU WILL GET ALL THE EXTRA PARTS ALSO AND WITH WOOD CASE AND BOOKLET. WHAT YOU SEE IS WHAT YOU WILL GET. SHIPPING IS USA ONLY SEE PHOTO WE WILL COMBINE SHIPPING ON ANY ITEMS ANY QUESTIONS: EMAIL US WE ACCEPT PAYPAL, WE SHIP EVERY DAY.ALL ITEMS ARE SOLD AS IS WITH NO REFUNDS WHAT YOU SEE IN THE PIC'S IS WHAT YOU WILL GET IF IT IS NOT IN THE PIC'S YOU WILL NOT GET IT.SHIPPING IN USA ONLY. we put up for bid a wide range of different PRODUCTS. Most of our products come from ESTATES. We specialize in Everything. We Strive to sell the Best products, have Excellent communications with emails, and provide Great packaging and mailing services. ... moreThanks for looking and good luck bidding* We Buy Estates& sell them on Ebay So Don't forget to bookmark this site* FINGA7* To Check Out My Other Auctions And Save On Shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
Used Cincinnati Hydrashift metal lathe 17"X72" with flame hardened ways. Powered by 5HP 3phase currently wired 480v but can be changed to 220v. 25-980 Rpms and feeds 1 1/2 to 92 tpi. Includes taper attachment. 10" 4 jaw, 8" 3 jaw chucks, 14" 9" face plates, L1 taper on spindle, chip pans, manual, and thread dial. Lathe has 1/2 turn backlash in compound, and 1/8 turn in crossfeed. Bore is 1 3/4" The ways have minimal wear, are smooth with no lip, minor dinges. The lathe as been repainted at some point. It has new chip pans and the thread dial has been adapted but works good. The lathe runs good, shifts fine, and all functions work as they should Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift ... moreloading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
This is an assortment of boring bits that came with a vintage South Bend metal lathe I purchased They are various lengths and diameters.Most say High Speed. Some say National-Detroit. others Putnam-Weldon. CSD Co. They are not tapered. They are rusted pitted and have wear and tear but are priced to sell. I'm no expert but they appear to be quite sharp for their age. Local pick-up available. I will combine shipping on multiple purchases when practical.
This is an assortment of 8 drill bits that came with a vintage South Bend metal lathe I purchased They are various lengths and diameters.Most say High Speed. Some say Union Twist Drill CSD Co. etc Some are tapered most aren't. They are rusted pitted and have wear and tear but are priced to sell. I'm no expert but they appear to be fairly sharp for their age. Local pick-up available. I will combine shipping on multiple purchases when practical.
This is an assortment of 7 drill bits and 12 MT1 to MT2 adapter that came with a vintage South Bend metal lathe I purchased They are various lengths and diameters some say High Speed Some are tapered Number 1 Morse taper some aren't. They are rusted pitted and have wear and tear but are priced to sell. I'm no expert but they appear to be fairly sharp for their age. Local pick-up available. I will combine shipping on multiple purchases when practical.
This is a nice chuck Used very little. If you have any questions please contact me. Posted with
Milling attachment for Atlas Craftsman 10" and 12" metal lathes. Attaches to cross-slide. Allows lathe to be used to perform many milling functions. This unit is in excellent condition. And includes the draw bar with tool holder and a 3/4" mill and the ever important spindle thread protecting collar
Gear#3235 32 tooth Good used condition WI Residents add 5.6% Sales Tax
LOCAL PICK UP ONLY in Cincinnati. OH within 10 days of auction end. Paypal or Cash on Pickup only, NO CHECKS. Up for auction is a used but in clean good running condition South Bend 10K metal lathe. Model# CL 370 RD/Serial# 41485K. 1HP/1PH/120V with new 12/3 power cord. Rare 4.5 foot bed. Comes with tapering jig(unsure if all parts are there) and 5" three jaw South Bend chuck. Please note. The pictures of the tail stock do not show the binding lever but I DO have the parts for the binding lever. BRAND NEW for South Bend. Came from a university metal shop and saw little use because they ran mostly CNC equipment. I do not use metal lathes myself but have gone through all the adjustments and speeds and everything seems to work as needed. Anyone may email to set up a visit to inspect for yourself. As I said, I'm not too familiar with ... moremetal lathes so I've tried to describe to the best of my abilities. It is used and is being SOLD AS IS, NO RETURNS. I do have a 100% Feedback rating so bid with confidence. Can assist with loading for free. I also have another 10" South Bend(Heavy 10) lathe with 4.5 foot bed for auction currently so check my other auctions. Thanks.
Hello Folks. Protects spindle threads, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Hello Folks. Today we have a Craftsman Dunlap Spindle Glear# 3221 with set screw, 32 Tooth. This Spindle Gear, is in good, used condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Hello folks. This 36 Tooth Change Gear is used, but has no damage. Thank you for shopping with us. And please check our Ebay store often for some great new listings of trains and other fine items. We happily combine purchases on multiple items to help reduce the cost of shipping. Don't hesitate to email us with all and& any questions you may have. All purchases are packed and shipped with great care. So they arrive to you safe and intact. Payment using PayPal is appreciated within 4 days of purchase unless other arrangements have been made. A Note to our International Buyers: Most of our items come in at 4 lbs. and under. Therefore we ship First Class International. Luckily, we have had very few problems shipping to our international buyers, but we want to let you know that there is No Tracking available for First Class International ... moreexcept to our Canadian neighbors, so please know that if the item is lost in the mail we have no way to track it or confirm its delivery, so we Do Not refund for items lost in the mail. This does not apply to Canada, since it is possible to track a package to Canada through Ebay's Label System.
Hello folks. This 56 Tooth Change Gear is used, but has no damage. Thank you for shopping with us. And please check our Ebay store often for some great new listings of trains and other fine items. We happily combine purchases on multiple items to help reduce the cost of shipping. Don't hesitate to email us with all and& any questions you may have. All purchases are packed and shipped with great care. So they arrive to you safe and intact. Payment using PayPal is appreciated within 4 days of purchase unless other arrangements have been made. A Note to our International Buyers: Most of our items come in at 4 lbs. and under. Therefore we ship First Class International. Luckily, we have had very few problems shipping to our international buyers, but we want to let you know that there is No Tracking available for First Class International ... moreexcept to our Canadian neighbors, so please know that if the item is lost in the mail we have no way to track it or confirm its delivery, so we Do Not refund for items lost in the mail. This does not apply to Canada, since it is possible to track a package to Canada through Ebay's Label System.
Hello folks. This 52 Tooth Change Gear is used, but has no damage. Thank you for shopping with us. And please check our Ebay store often for some great new listings of trains and other fine items. We happily combine purchases on multiple items to help reduce the cost of shipping. Don't hesitate to email us with all and& any questions you may have. All purchases are packed and shipped with great care. So they arrive to you safe and intact. Payment using PayPal is appreciated within 4 days of purchase unless other arrangements have been made. A Note to our International Buyers: Most of our items come in at 4 lbs. and under. Therefore we ship First Class International. Luckily, we have had very few problems shipping to our international buyers, but we want to let you know that there is No Tracking available for First Class International ... moreexcept to our Canadian neighbors, so please know that if the item is lost in the mail we have no way to track it or confirm its delivery, so we Do Not refund for items lost in the mail. This does not apply to Canada, since it is possible to track a package to Canada through Ebay's Label System.
Hello folks. This 54 Tooth Change Gear is used, but has no damage. Thank you for shopping with us. And please check our Ebay store often for some great new listings of trains and other fine items. We happily combine purchases on multiple items to help reduce the cost of shipping. Don't hesitate to email us with all and& any questions you may have. All purchases are packed and shipped with great care. So they arrive to you safe and intact. Payment using PayPal is appreciated within 4 days of purchase unless other arrangements have been made. A Note to our International Buyers: Most of our items come in at 4 lbs. and under. Therefore we ship First Class International. Luckily, we have had very few problems shipping to our international buyers, but we want to let you know that there is No Tracking available for First Class International ... moreexcept to our Canadian neighbors, so please know that if the item is lost in the mail we have no way to track it or confirm its delivery, so we Do Not refund for items lost in the mail. This does not apply to Canada, since it is possible to track a package to Canada through Ebay's Label System.
Hello folks. This 46 Tooth Change Gear is used, but has no damage. Thank you for shopping with us. And please check our Ebay store often for some great new listings of trains and other fine items. We happily combine purchases on multiple items to help reduce the cost of shipping. Don't hesitate to email us with all and& any questions you may have. All purchases are packed and shipped with great care. So they arrive to you safe and intact. Payment using PayPal is appreciated within 4 days of purchase unless other arrangements have been made. A Note to our International Buyers: Most of our items come in at 4 lbs. and under. Therefore we ship First Class International. Luckily, we have had very few problems shipping to our international buyers, but we want to let you know that there is No Tracking available for First Class International ... moreexcept to our Canadian neighbors, so please know that if the item is lost in the mail we have no way to track it or confirm its delivery, so we Do Not refund for items lost in the mail. This does not apply to Canada, since it is possible to track a package to Canada through Ebay's Label System.
Hello folks. This 44 Tooth Change Gear is used, but has no damage. Thank you for shopping with us. And please check our Ebay store often for some great new listings of trains and other fine items. We happily combine purchases on multiple items to help reduce the cost of shipping. Don't hesitate to email us with all and& any questions you may have. All purchases are packed and shipped with great care. So they arrive to you safe and intact. Payment using PayPal is appreciated within 4 days of purchase unless other arrangements have been made. A Note to our International Buyers: Most of our items come in at 4 lbs. and under. Therefore we ship First Class International. Luckily, we have had very few problems shipping to our international buyers, but we want to let you know that there is No Tracking available for First Class International ... moreexcept to our Canadian neighbors, so please know that if the item is lost in the mail we have no way to track it or confirm its delivery, so we Do Not refund for items lost in the mail. This does not apply to Canada, since it is possible to track a package to Canada through Ebay's Label System.
UP FOR YOUR CONSIDERATION IS: EVEREDE MACHINIST METAL LATHE BORING BARS(7) WITH WOODEN CASE NICE INDEXABLE. PURCHASED AT AN ESTATE SALE. VINTAGE ORIGINAL WOODEN BOX. HOLDS BOTH CARBON AND METAL CUTTERS. USED WITH MOST LATHES. BORING BAR MEASUREMENTS: 220 11/32" 225 3/8" 235 1/2" 240 9/16" 245 5/8" 250 3/4" 265 1" 3350 3/4" HOLDER, SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Hello Folks. This Craftsman Dunlap Spindle Bushing is in good, used condition, no damage. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
12"X36" Atlas/ Clausing lathe. Lathe is in working order has been cleaned and gone through. Is missing gear cover, still needs a few parts to be in full working condition. It cuts good and apron and cross feed both run well with power feed. Lathe comes with(1) Rocker style tool post holder, 1) 8" 3 jaw chuck, 1) 8" 4 jaw chuck, 1) 1/2"MT#3 Jacobs chuck, 2) face plates, 1) 1/2"spindle Jacobs Chuck,3) Lathe dogs, 1) 9/16"to 2" MT#3 Bull nose live center, 3) MT#3 Dead Centers, 1) MT#3 live center, 1) Atlas Cross feed milling attachment, 1) Atlas steady rest. Orange metal stand NOT INCLUDED. Buyer is responsible for shipping. I am willing to pallet shipment for $50.00. We can check on shipping prices by sending it through our business truck freight. Or buyer can arrange own shipping or local pickup. We ... morehave also listed this in other classifieds so listing may be pulled early if it sells through another source. Please ask questions before bidding there will be no returns accepted on this item. As is no warranty HAPPY BIDDING.
The following auction is for a Sears Dunlap 109 6" Metal Lathe Change Gear Bolt Atlas Craftsman The Change Gear Bolt is in nice used condition with some wear. It is o ff of a Sears Dunlap Model 109. 0703 Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.0 0 for USPS 1st Class Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
The following auction is for a Craftsman Sears Model 109 6" Metal Lathe Tool Post Holder Dunlap Atlas 109.21270 The bottom base is 3/4" wide. The tool bit resting base is 1" wide. It uses 1/4" tool bits. It is in fine condition with some wear. See pictures. It is o ff of a Sears Craftsman Model 109. 21270 m etal l athe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder to pay $ 4.00 for USPS 1st Class Mail Shipping with Delivery Confirmation within the Uni ted States. I can combine shipping. International buyers please contact me before purchase. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
CAME WITH 12" CRAFTSMAN METAL LATHE. I DOUBT IT WAS ORIGINAL BUT BOLTED UP WELL. MANY OTHER MACHINERY APPLICATIONS PER FOLLOWING SPECS. PLEASE CK BEFORE YOU BID. MODEL#113.12540 CRAFTSMAN CAT# 1254 CAPACITOR START BALL BEARING. 1/2 H.P. 1725 RPM FRAME Y56C 110/220 VOLT- REVERSABLE EASY SWITCH OVER PER LEGIBLE NAME PLATE THERMAN RE-SET DUAL SHAFT 5/8" WITH 3/16 KEYWAY 1 7/8" LONG EXCELLENT SIZE.6248 DIA. CLEAN" OPPOSITE END(WITH COVER) 1/2" DIA. SET SCREW ON FLAT LOCK. BASE TO SHAFT C/L 3 1/2" 6 1/4" DIA. FRAME. MOUNT HOLES 3" B/C PARALLEL TO SHAFT 4 7/8" B/C PERPENDICULAR TO SHAFT(SLOTTED) ADJUSTABLE. FOR 5/16 HARDWARE 4' CORD NO SWITCH DIRECT PLUG IN AND START. CLEAN INSIDE AND OUT FEW COSMETIC MARKS. SEE PHOTOS NICE QUIET RUN MOTOR
Hello Folks. Atlas Motor# 2730, 1/3 H.P. 1725 R.P.M. 110-220 v. This motor was tested and it ran fine. Thank you for shopping with us today. And please check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days, and you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Normal 0 Welcome to my site! Victor 2080 20" x 80" Gap Metal Lathe Comes with 3 Jaw Chuck. 4 Jaw Chuck, Face Plate, Steady Rest, and Quick Change Tooling, Manual Please see item description Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Everything is in excellent condition. As close to buying new as you can get. When buying used. Machine has been maintained very well. Always stayed well oiled and cleaned. Everything moves with ease. This equipment was used by only 1 person who was a very meticulous professional and took great care of his equipment. We do not have the materials or the resources to ship this item. Item must be picked up or shipping arrangement s must be made solely by the buyer. We do not have any lifts on site. Moving ... moreequipment will have to be supplied by the bu yer. The shop does have a loading dock. If you have any questions. Please ask and I will respond quickly! I can provide a contact phone number if needed. Sometimes a real voice goes a long way! We can definitely arrange a viewing time for interest ed buyers. N.M. buyers will be charged a 7.53% sales tax Thank you! I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal or cash payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
Used hobby lathe 9x19. Gear/belt cover repaired from damage. American made 115 volt motor. Tooling as shown. Selling as is.
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Emco Metal Lathe- Compact 8. 115v, 60Hz, 5a, Serial 3201010 Item Description: This is a Emco Metal Lathe. Model: Compact 8 Voltage: 115 HZ: 60 Amp: 5 Serial: 3201010 Note Buyer will be responsible for all equipment. ... moreTools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Oakland. CA 94601 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33033) nbsp, nbsp, Model: Compact 8, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Features: clean, nbsp, nbsp, Date of Manufacture: unknown, nbsp, nbsp, Size: 48 23 45, nbsp, nbsp, Color: green, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: Forklift and loading dock may be available on site to assist in loading on pickup day. Buy
Up for bids is a ATLAS/ Craftsman 10" Lathe Gear Guard. Part no. 10F-28 with thread chart and handle knob, part no. 9-154 and spring, part no. 9-157, in fair to good condition with some light surface rust. Thread chart has some rust and pitting also. Other than the rust, it is a good solid piece. If you have any questions feel free to ask. Buyer pays shipping in the US. Thanks for looking and have a great day.
Very Nice- Original Logan tailstock wrench for a Logan 10" Model 820 lathe. Hex is 15/16" All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
TAILSTOCK FROM 9" LATHE This sweet tailstock has markings 9-5 and 9-6 on castings. 9" Flat ways. Measures 3-1/2 between ways. Ships at 10 lbs. Come On and Bid! You'll Be Glad You Did! Please email with any questions BEFORE you bid or order. We try to describe each item as accurately as possible. And want the bidder to be confident that the item is what they want. Our feedback record proves that we are trusted. We treat folks right. NOTE: PA Residents must pay 6% sales tax. If you have exemption form please email us for details of filing with us. NO OTHER EXCEPTIONS. Please check out our other auctions and visit our. EBAY STORE. THANKS FROM ALL OF US AT THE WORLD'S FIRST TOOL SUPERMA R KET. Can you afford to buy tools from anyone else?
CRAFTSMAN METEL LATHE. MODEL# 109.21270. 3 JAW CHUCK. 10" BED X 3-1/2" SWING. GE 1/4 HP MOTOR. 1725 RPM. 110 VOLT. WRENCHES INCLUDED. YOU GET WHAT IS IN THE PICTURES. UNMOUNTED. I BOUGHT THIS FROM A ESTATE SALE ABOUT 8 YEARS AGO. I HAVE USED IT EVER SINCE. NEW REPLACED BEARINGS MARCH 2013. IN GREAT WORKING CONDITION. MOVED ON TO A BIGGER LATHE.
CLAUSING 1300. MODEL1301 Metal Lathe CLAUSING 1300. MODEL1301 Metal Lathe I have included many pictures of the Item. +++===MEASUREMENTS& INFO===+++ Sold As Is. SERIAL NUMBER 131106 MODEL NUMBER 1301 73 inches Wide 49 inches High 29 inches front to back It was used last year. A few months ago Previous owner passed away. many pictures included) You can call if you have questions. Please leave name and phone number and a good time to call back. Need more pictures. OR more info PLEASE ASK by Email or Call Jamie 815-621-6484 =====SHIPPING INFO==== This item can be shipped in lower 48 states Only. Item can be picked up. We can have item shipped. But we do not have a shipper for heavy machnery(AT THIS TIME) so Buyer is Required to help find a shipper. Item is in South Beloit ILLINOIS in a workshop with a large overhead door. You can call if ... moreyou have questions. Please leave name and phone number and a good time to call back. $$$$$ PAYMENT $$$$$ We take Pay Pal! Contact me for payment methods to pay on pick-up. Payment must be made in 10 days. Buyer needs to contact Seller of any payment problems. PLEASE CALL IF you have any problems or questions call Jamie 815-621-6484
THIS IS A 1968 ROCKWELL MACHINE TOOLS CATALOG IN EXCELLENT CONDITION. THIS INCLUDES INFO ON METAL LATHES. MILLING MACHINES, AND TOOLMAKER GRINDERS OF THE TIMEFRAME. PLEASE EMAIL WITH QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e3c485564-0xf4-
THIS IS A LATHE BACKING PLATE FOR A METAL LATHE CHUCK. IT IS 6 1/4" DIA. AND 2" THICK. IT HAS A THREADED 2 3/4 CENTER HOLE AND 6 THREADED MOUNTING HOLES FOR ATTACHMENT TO THE CHUCK. THERE IS A# ON THE PLATE-T989. Check out my! NOT RESPONIBLE FOR ITEMS LOST IN SHIPPING UNLESS U BUY INSURANCE. On Apr-14-13 at 18:59:04 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
This gear fits a Leblond 15" Dual Drive Lathe. I have some dimensions in the first photo. If you need more do not hesitate to ask. Bore 3/4" 3/16" key Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
Spindle- 1/2-20 threads- Sears Dunlap 109 6" metal lathe Model 109.0703 Description: Spindle from a Sears Dunlap 109.0703 6" metal lathe. The spindle is straight. Measures 0.550" at the rear bearing point. And 0.548" at the front bearing. The 1/2-20 threads have noticeable wear on them(the OD is about 0.486" The shaft is scored from a loose set screw. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: Default shipping is USPS Priority. If you want it delivered faster or cheaper. I am willing to use any other ... moreshipping service the USPS offers, or to ship via UPS or FedEx(shipping charges will be actual cost) If you want to use an alternate shipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have every item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the listing. Please r
32 tooth spindle gear- 3221 Sears Dunlap 109 6" metal lathe- Model 109.0703 Description: Spindle gear from a Sears Dunlap 109.0703 6" metal lathe. Part number 3221. 32 teeth. Teeth are in good shape. Little wear, no chips or cracks. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: Default shipping is USPS 1st Class Mail. If you want it delivered faster or cheaper. I am willing to use any other shipping service the USPS offers, or to ship via UPS or FedEx(shipping charges will be actual cost) If you want to use an alternate ... moreshipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have every item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the listing. Please read the description and look at the pictures carefully. If you have any questions or comments about this item, please contact me b
Back gear internal drum pulley- Sears Dunlap 109 6" metal lathe Model 109.0703 Description: Back gear and pulley from a Sears Dunlap 109.0703 6" metal lathe. Gears and pulleys are in good condition. No broken teeth. The pulleys have very little wear. Everything in the pictures below is included. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: I offer UPS Ground or USPS Priority Mail shipping for this item. Please choose the method you would like to use at checkout. If you want it delivered faster or cheaper. I am willing ... moreto use any other shipping service UPS or the USPS offers, or to ship via FedEx(shipping charges will be actual cost) If you want to use an alternate shipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have every item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the
Lead screw- Sears Dunlap 109 6" metal lathe- Model 109.0703 Description: Lead screw from a Sears Dunlap 109.0703 6" metal lathe. The Acme threads are in good condition. With just a few minor dings and very little rust. The rod is straight. Includes the collar, but you will need a pin to lock it to the shaft. 30 5/8" overall length, with about 22 7/8" of threads. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: Default shipping is USPS Priority. If you want it delivered faster or cheaper. I am willing to use ... moreany other shipping service the USPS offers, or to ship via UPS or FedEx(shipping charges will be actual cost) If you want to use an alternate shipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have every item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the listing. Pl
SOUTH BEND 9" MODEL C METAL LATHE BANJO BRACKET SINGLE ARM WITH GEAR STUDS AND BUSHINGS
DESCRIPTION: USED, PRATT 5" 4 JAW CHUCK WITH KE Y(MADE IN ENGLAND) AND 5 1/2 DIAMETER FACEPLATE FROM A N EMCO MAXIMAT 7 LATHE. THE MOUNT IS 1 1/2-8. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. ... moreI DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DE
Scroll down for more photos. This auction consists of a vintage Center Tool Company Catalogue. It has 110-pages loaded with photos. Descriptions, specifications, prices and more covering a wide variety of machine shop tools. It has taps, dies, bits, mills, machinists chests, dividing heads, lathe chucks, Toledo power saw, milling machine vises, arbor presses, face plates, lathe grinder, and much more. It's in nice condition. Please be aware that our pictures may have slight variations in color from the actual item(caused by our camera and/or your computer monitor) We are not experts on the items we sell. So if you have questions please be specific, and ask before bidding. SHIPPING: We will ship to U.S. and Canada- and possibly elsewhere if contacted before bid is placed. Winning bidder will pay $3.75 for shipping/handling. MORE FOR SHIPPING ... moreOUTSIDE THE U.S. WA state residents will have to add 8.7% sales tax. We usually ship on Tuesdays and Fridays(except for holidays) PAYMENT: We accept PayPal and other- contact us for more information. Payment is expected within 15 days. If you win multiple auctions from us. Please make one combined payment for all of your items. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Good Luck Bidding! Keywords:
Here is an American Tool Works engine lathe. The actual swing is 22 1/2" The swing over the cross slide is 12 1/4" The center to center distance is 166" with the tailstock completely on the bed. The spindle hole is 1 3/4" It has an 18" chuck. The motor appears to be 5 h.p. and 880 rpm. It is 220v/440v and 15.2 amps/ 7.6 amps 3-phase. The overall length is 20 feet. The widest point from the back of the taper attachment to the carriage handle is 48" I estimate the weight to be 8000 lbs max. My 12.000 lb forklift lifted it at a 48" load center indicating it probably weighs less. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the ... morelaws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt* c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13e493bbe12-0xfa-
good used machine crank approx.425" square x 3 1/2" long will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a Medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
MITER GEAR& STUD FOR A 10" 12" ATLAS CRAFTSMAN LATHE THE TEETH HAVE NO CHIPPED OR BROKEN TEETH. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. ... moreIF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY
Excellent Condition- Original 4 step headstock pulley with bushing for a 10" Atlas or 12" Craftsman lathe. Pulley is stamped with part number 10-79. Interior bore is 1 1/2" Pulley diameters are 5 15/16" 4 15/16" 3 15/16" and 2 15/16" In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Nice- Original headstock spindle back gear with bushing for a 10" Atlas or 12" Craftsman 101 series lathe. Original part number 10-242. Interior bore is 1 1/2" Outer diameter is 2 5/8" 30 tooth gear teeth are 3/4" wide. In fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Welcome to my site! Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Great condition. Clamp wears a little black paint. Which is worn. The bolt is a little dirty. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within ... more2 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking!
Le Blond Regal Lathe with all the extras! Bed Length 100" Swing: 16. Working length: 42" Was operational when shut down in November. Chucks: 3 Jaw. 4 Jaw, 6 Jaw. Tail Support.
Original lathe center steady tool rest from an antique Barnes No. 5 metal working lathe in very good condition. Original adjuster screws. Fingers, and hold down bolt in very good condition. More higher quality pictures coming tomorrow night. Shippiing to Alaska and Hawaii will be additional
Tailstock assembly tail stock- Sears Dunlap 109 6" metal lathe- Model 109.0703 Description: THIS TAILSTOCK CASTING HAS BEEN REPAIRED Tailstock from a Sears Dunlap 109.0703 6" metal lathe. One of the tabs on the bottom of the casting was broken and replaced with brazing. Functional. And not visible when it is in place. Everything shown in the pictures is included. The ram moves smoothly with little play. And locks tightly. Other than the repair mentioned above, there are no cracks or breaks in the castings. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 ... moredays of the auction closing. Shipping: Default shipping is UPS Ground. If you want it delivered faster or cheaper. I am willing to use any other shipping service UPS offers, or to ship via the USPS or FedEx(shipping charges will be actual cost) If you want to use an alternate shipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have e very item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly
Headstock casting- 3403- Sears Dunlap 109 6" metal lathe- Model 109.0703 Description: Headstock casting from a Sears Dunlap 109.0703 6" metal lathe. Includes both bronze bearings and oilers. The Dunlap logo is largely intact. No cracks or breaks. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: Default shipping is UPS Ground. If you want it delivered faster or cheaper. I am willing to use any other shipping service UPS offers, or to ship via the USPS or FedEx(shipping charges will be actual cost) If you want to use an ... morealternate shipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have e very item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the listing. Please read the description and look at the pictures carefully. If you have any questions or comments about this item, please contac
Mounting or back plate- 3203- Sears Dunlap 109 6" metal lathe- Model 109.0703 Description: Mounting or back plate from a Sears Dunlap 109.0703 6" metal lathe. No cracks or breaks in the casting. Mounting hardware is included. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: Default shipping is UPS Ground. If you want it delivered faster or cheaper. I am willing to use any other shipping service UPS offers, or to ship via the USPS or FedEx(shipping charges will be actual cost) If you want to use an alternate shipping ... moremethod, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have e very item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the listing. Please read the description and look at the pictures carefully. If you have any questions or comments about this item, please contact me before bidding.
Gear cover& threading chart 3201 Sears Dunlap 109 6" metal lathe Model 109.0703 Description: Gear cover and threading chart from a Sears Dunlap 109.0703 6" metal lathe. No cracks or breaks in the casting. Threading chart is in very good condition- very readable. Bullet catch works. I am parting out most of this lathe. So if you are looking for other parts I may have them. If they are not listed yet, send me a message and I may still have it. As always, I am happy to combine shipping to save you money whenever possible. Payment: I reserve the right to relist this item if payment is not received within 10 days of the auction closing. Shipping: Default shipping is UPS Ground. If you want it delivered faster or cheaper. I am willing to use any other shipping service UPS offers, or to ship via the USPS or FedEx(shipping charges will ... morebe actual cost) If you want to use an alternate shipping method, you may contact me for an estimate before the auction ends. If you win, and would like to use an alternate shipping method, please send me an email indicating which service you would like to use before sending payment. Although I am happy to accommodate alternate shipping methods, please be aware that it may take an extra day or two to get your package out. I will be happy to combine shipping. Shipping charges will be actual cost. Just let me know that you are bidding on one of my other auctions. Although much of my packaging is recycled. I will not compromise on the security of your package. My goal is to have e very item arrive safely. INTERNATIONAL BUYERS- Given the wide variety of shipping options available. It is very likely that the shipping method shown is neither the cheapest nor fastest available. Please contact me for more options. Terms of Sale: Because I want you to know exactly what you are bidding on. I make every effort to accurately describe my items. My pictures are also an important part of the listing. Please read the description and look at the pictures carefully. If you have any questions or
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ 5" diameter 3 jaw England self centering no key for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your ... morelathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e52e2ff3d-0x100-