In 
 
Order by: 
Available to: 
Price: 
 - 
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
65
Buy It Now
$20 Shipping
Condition: Used
Location: Elizabethtown,PA,USA
$
195.95
Buy It Now
$14.35 Shipping
Condition: Used
Location: Holgate,USA
This is a 303K62 Webster magneto igniter bracket. This igniter is for Ottawa engines. I think it will also fit an Associated or United Engine It is in ... moregood shape and ready to use. Check out the pictures and see if you need it. Part No. 303K62 Mounts to the engine with 2 holes 2" apart on center. No Cracks. Breaks, or welds Ready to use Take a K or L Webster Mag Mag bolting pattern is 2" x 2" If you pick this part up at my house 7.25% sales tax will be added to the purchase price. If it is shipped or delivered out of state then there will be no sales tax. If you have the proper exemptions then also there would be no sales tax. My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any and all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapist if you need help. So if someone doesn't pay I will ban them from m
$
60
Buy It Now
Free Shipping
Condition: Used
Location: Sherwood,USA
$
162.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
525.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
35
6d 10h 33m 35s
1 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
30
10h 34m 59s
2 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
40
Buy It Now
$0 Shipping
Condition: New
Location: Rock Hill,SC,USA
$
60
Buy It Now
Free Shipping
Condition: Used
Location: Sherwood,USA
$
50
5d 11h 3m 16s
0 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
76.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
249.95
Buy It Now
Free Shipping
Condition: Used
Location: Holgate,USA
$
100
4d 11h 10m 12s
0 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
99
Buy It Now
Free Shipping
Condition: Used
Location: Medford,WI,USA
$
115.49
Buy It Now
Free Shipping
Condition: New
Location: Le Mars,IA,USA
$
68.45
Buy It Now
Free Shipping
Condition: Used
Location: Mundelein,IL,USA
$
95
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
115.95
Buy It Now
$14.35 Shipping
Condition: Used
Location: Holgate,USA
$
129
Buy It Now
$0 Shipping
Condition: New
Location: Boaz,KY,USA
$
149.95
Buy It Now
$14.35 Shipping
Condition: Used
Location: Holgate,USA
$
3,400
Buy It Now
$0 Shipping
Condition: Used
Location: Corsicana,TX,USA
auction is for a nice looking lauson motor it has good compression but no spark it should not take a lot to get it running if you have the time ihs type ... morersh plus some numbers that i cant read all of it also has 7245421 thanks
$
195
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
149.95
Buy It Now
$0 Shipping
Condition: Used
Location: Waldo,WI,USA
$
74.95
Buy It Now
Free Shipping
Condition: Used
Location: Holgate,USA
$
14
Buy It Now
Free Shipping
Condition: New
Location: Oshkosh,WI,USA
$
50
4d 11h 8m 55s
0 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
195.95
Buy It Now
Free Shipping
Condition: Used
Location: Holgate,USA
$
30
6d 10h 33m 30s
0 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
24.99
Buy It Now
Free Shipping
Condition: Used
Location: North Ridgeville,USA
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
20
2d 0h 16m 54s
0 bids
Free Shipping
Condition: Used
Location: Painesville,USA
$
100
Buy It Now
Free Shipping
Condition: Used
Location: Sherwood,USA
$
250
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
95.95
Buy It Now
$8.5 Shipping
Condition: Used
Location: Waldo,WI,USA
$
19.99
Buy It Now
Free Shipping
Condition: Used
Location: Canada
DELAVAL Up for bidding is this vintage Hit& Miss Engine Oiler made by The Delaval Separator Co. Made of metal and glass. Good used condition. Needs ... moregeneral cleaning. Don't know if it still works or not. As always will combine S/H for multiple winning bids. If you have any questions or concerns please feel free to contact me. NOTE: Will not ship first class international unless contacted. Will not mark items as gifts. THANKS FOR LOOKING. Please feel free to Check out my!
$
75
Buy It Now
$12 Shipping
Condition: Used
Location: Quakertown,PA,USA
$
495.95
Buy It Now
Free Shipping
Condition: Used
Location: Holgate,USA
$
20
5d 11h 6m 4s
0 bids
Free Shipping
Condition: Used
Location: Onaga,KS,USA
$
110
Buy It Now
$16 Shipping
Condition: Used
Location: Elizabethtown,PA,USA
$
75
Buy It Now
$14.35 Shipping
Condition: Used
Location: Sherwood,USA
$
23.5
Buy It Now
$0 Shipping
Condition: New
Location: Le Mars,IA,USA
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach Part: Briggs& Stratton check valve Condition: New Description: Brand new check valve for Briggs engine. This check valve will work on lots of models including the full line of 2 inch bore engine as well as others. This check valve comes complete with compression fittings and the gasket. It features a removable and serviceable filter screen on the bottom and is all brass construction. Made in the USA this is a superb little check valve that will last for many years to come! Questions? Call 712-490-5596 Thanks. Zach Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want to do. I don't offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Posted with
$
2,750
3d 9h 34m 36s
0 bids
$3,575 Now
$0 Shipping
Condition: Used
Location: Ignacio,CO,USA
$
226.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
100
Buy It Now
Free Shipping
Condition: Used
Location: Sherwood,USA
$
225.95
Buy It Now
Free Shipping
Condition: Used
Location: Holgate,USA
$
10.99
Buy It Now
$0.99 Shipping
Condition: New
Location: Bluffton,USA
$
149.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
89.95
Buy It Now
$6.95 Shipping
Condition: Used
Location: Kandiyohi,MN,USA
$
399.99
Buy It Now
Free Shipping
Condition: Used
Location: Orient,USA
$
449.95
Buy It Now
$13.95 Shipping
Condition: Used
Location: Holgate,USA
$
245.95
Buy It Now
$0 Shipping
Condition: Used
Location: Waldo,WI,USA
$
24,500
Buy It Now
$0 Shipping
Condition: Used
Location: Sparta,NC,USA
$
60
Buy It Now
Free Shipping
Condition: Used
Location: Sherwood,USA
$
129
Buy It Now
$0 Shipping
Condition: New
Location: Boaz,KY,USA
$
60
Buy It Now
Free Shipping
Condition: Used
Location: Sherwood,USA
$
95.95
Buy It Now
$0 Shipping
Condition: Used
Location: Waldo,WI,USA
$
99.99
Buy It Now
$0 Shipping
Condition: Used
Location: Mount Pleasant,IA,USA
$
60
Buy It Now
Free Shipping
Condition: Used
Location: Le Mars,IA,USA
$
453.89
Buy It Now
$0 Shipping
Condition: New
Location: Hong Kong
 In 

Past Items  
 
Vintage Antique Hit& Miss Gas Engine Wood Papered Flat Belt Pulley Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Hit& Miss Gas Engine Wood Papered Flat Belt Pulley 1" Bore Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
UNIT HAS NOT BEEN ABUSED. Needs a good cleaning dust on the nooks and and such~SHIPPING USA ONLY OTHERS INQUIRE
You are bidding on a maytag 72 crankshaft. Looks good Took alot of pictures for you. Not bent Threads look good(see pics) Check out my other listings. Good Luck Posted with
PLEASE READ THE DESCRIPTION AND LOOK OVER THE PICTURES CAREFULLY BEFORE BIDDING-USE THE ZOOM FEATURE FOR A CLOSER LOOK-LEAVE US KNOW IF MORE PICTURES ARE NEEDED-ASK QUESTIONS BEFORE BIDDING-WE TRY TO DESCRIBE EVERYTHING AS ACCURATELY AS POSSIBLE.BUT BEING HUMAN WE OCCASIONALLY MAY MISS SOMETHING-WE HAVE A NO RETURN POLICY,BUT WE WILL WORK WITH YOU IF YOU FIND A DISCREPANCY IN DESCRIPTION-PLEASE CONTACT US IF THERE ARE ANY PROBLEMS-WE STRIVE FOR A 5 STAR RATING-PLEASE LEAVE A FEEDBACK SO WE KNOW HOW WE'RE DOING-PAYMENT WILL BE REQUIRED WITHIN 5 DAYS OF THE END OF THE AUCTION-WE GENERALLY SEND A REMINDER INVOICE AT THE END OF THIS PERIOD IF PAYMENT HAS NOT BEEN RECEIVED YET-AFTER 7 DAYS WITHIN THE END OF THE AUCTION,WE ARE FORCED TO ISSUE A NO PAY THROUGH E-BAY-SORRY,BUT WE HAVE HAD TOO MANY NO PAYS RECENTLY-IF AN EXTENSION IS NEEDED FOR ... morePAYMENT,PLEASE CONTACT US PREFERABLY BEFORE BIDDING-WE CAN NORMALLY WORK WITH YOU ON A"REASONABLE" TIME PERIOD FOR THIS-PAY PAL ONLY-LOCAL PICK-UP AVAILABLE-COMBINED SHIPPING AVAILABLE-THANK YOU FOR LOOKING AND GOOD LUCK BIDDING. 2 brass tapered thread oiler valves- Marked#8- Valves move freely- Need cleaned up. In as found condition.
4 Cast Iron Platform Scale Wheels 4"x1" w/5/8" Center Mini Hit Miss Engine Cart BIN Up for auction is this set of 4 cast iron scale wheels. Actual measurements are 3 7/8" x 1 1/8" wide and will fit over 5/8" axle. No visible cracks. If you have any questions please ask. My auctions end nightly between 8:00 and 8:30 PM eastern time. Check my other listings while you're here. I will be listing many parts and farm related items over the winter months so check back often or add me to your favorites list. Thanks for looking. PAYMENT: You have up to 7 days to pay thru PAYPAL. If you would like to pickup an item cash will be excepted but will need payment within 1 week. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13fa2741b51-0x100-
UP FOR AUCTION A LOT OF 3 VINTAGE. GLASS OILERS NO CRACKS OR CHIPS IN VERY GOOD CONDITION. UNMARKED APPROX.MEASUREMENT ALL 3 HEIGHT 4 1/4" DIAMETER 2" ANY QUESTIONS PLEASE EMAIL
VERY OLD BRASS VALVES. GREAT CONDITION STEAM ENGINE. BOILER item is located in Toronto.On. I ship from Buffalo,NY once a week to save USA bidders money on shipping and customs fees etc. I will box and pack with foam rubber and charge $10 flat rate from Buffalo NY. I drive 2 hrs one way for you and usually try and have a few parcels to ship at same time, so please pay early, makes it easier to get everything ready. If you are in a rush and want to pay the higher Canada post prices and have it shipped next day. I will gladly get you a price. I also ship anywhere in the world ask for shipping prices. Sometimes my flate rate quote is low in cost and sometimes it is a little higher cost to ship and usually I am close on what it actually costs. so if you do not like my flat rate quote do not bid!
OVERALL LENGTH IS 5" LONG. VERY OLD BRASS. GREAT CONDITION STEAM ENGINE, BOILER item is located in Toronto.On. I ship from Buffalo,NY once a week to save USA bidders money on shipping and customs fees etc. I will box and pack with foam rubber and charge $10 flat rate from Buffalo NY. I drive 2 hrs one way for you and usually try and have a few parcels to ship at same time, so please pay early, makes it easier to get everything ready. If you are in a rush and want to pay the higher Canada post prices and have it shipped next day. I will gladly get you a price. I also ship anywhere in the world ask for shipping prices. Sometimes my flate rate quote is low in cost and sometimes it is a little higher cost to ship and usually I am close on what it actually costs. so if you do not like my flat rate quote do not bid!
OVERALL LENGTH IS 13 1/2. ABOVE THREADS IS 10 3/4. VERY OLD BRASS. GREAT CONDITION STEAM ENGINE BOILER item is located in Toronto.On. I ship from Buffalo,NY once a week to save USA bidders money on shipping and customs fees etc. I will box and pack with foam rubber and charge $15 flat rate from Buffalo NY. I drive 2 hrs one way for you and usually try and have a few parcels to ship at same time, so please pay early, makes it easier to get everything ready. If you are in a rush and want to pay the higher Canada post prices and have it shipped next day. I will gladly get you a price. I also ship anywhere in the world ask for shipping prices. Sometimes my flate rate quote is low in cost and sometimes it is a little higher cost to ship and usually I am close on what it actually costs. so if you do not like my flat rate quote do not bid!
Up for Auction~ A Vintage Lunkenheimer Hit Miss Engine Oiler No. 4 1300 Sentinel It is brass and glass All glass is intact and not broken or chipped or cracked It does have a couple of green paint splotches on it It is 9 1/2 inches(without the very end piece that curls around) Glass piece is 8 inches around Great item! Thanks for looking. And good luck if you bid! Make sure to check out our other auctions, we always have lots of goodies! Check out my! Be sure to add me to your! Please read our terms before bidding! 1. If you have any questions. PLEASE email us before the close of auction. We are always checking our email. 2. We will always give shipping discounts to multiple auction wins within a couple of days of each other. 3. Payment is expected within 5 business days after close of auction. And communication is essential if not received. ... more4. All bidders must now pay with pay pal. 5. We do NOT end our auctions early! 6. We do NOT ship outside the US anymore. 7. All our items come from estate sales or our own personal collections. They come as is and are not returnable. But. If it is something you really hate, or wasn’t at all what you expected, or if we have failed to describe it correctly, you must notify us immediately so we can work something out. We want you to be satisfied with your purchase, and hope you come back again to bid with confidence! We appreciate your business. Thanks for bidding with us! Kathy& Bruce.
Lunkenheimer catalog N0 78 September 1939.Has 136 pages and the Front and back Cover are a hard Plastic like materiel.Overall excellent with very minor soiling.Please ask Questions before bidding.
Vintage grease cup from antique farm equipment or stationary engine or other misc. machine 1 3/8" dia with 1/4" mpt. May have never been used. Free shipping in mainland U.S.A. I have two other grease cups listed.
This is a very nice original and rather scarce sales catalog for New Holland gasoline engines. Wood saws, feed mills, rock crushers and pulverizers, and pump jacks. It measures about 3 5/8 x 6 3/16 inches with 16 pages plus the covers. It in in good condition for it's age with some minor wear, creasing, and soiling. It has sections devoted to each of their products and gives information about all of them. It is heavily illustrated. It would be a great addition to your early agricultural advertising collection and it would look especially nice displayed with your New Holland engine at the shows! These originals don't turn up very often and this is a pretty nice one so don't miss it. The pictures tell the story. You won't be disappointed in any way. Good Luck.
This is an extremely scarce. If not rare, original advertising celluloid pocket knife sharpener featuring the Waterloo Boy kerosene tractor and engines. It also advertises US huskers and silo fillers, Letz feed grinders, and Russell threshing machines. It is quite large and measures 1 3/4 inches in diameter. It is from the Arbuckle Ryan Company in Toledo, Ohio. It is in great condition considering it's almost 100 years old with some minor staining and foxing around the edges. The stone on the back side is in near perfect condition. This would be a very nice addition to your early agricultural advertising collection especially if you like John Deere. The pictures tell the story. It will likely be a very long time before another one turns up and it likely wont' be this nice! You won't be disappointed in any way. Good Luck.
Antique Roll Anchor Valve Stem Packing Hit& Miss Gas Steam Engine Seal Gasket Selling With No Reserve! Hi! I have for Auction here a NOS roll of Hit& Miss Engine Valve Packing-or something of that sort. I am not exactly sure what this stuff is used for. It is about 3/16" in diameter and it looks like there are a couple hundred feet here. The box is a little tattered. Hard to find item. Help yourself to a great deal! Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details ... moreor if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee.
It's a Oiler I believe. For some kind of farm equipment Straight out of the barn standing 8" tall x 3-5/8" wide. No threads on straw Seals seem intact. Glass cylinder is perfect with no chips cracks or fissures Arrow embossed on solid metal top to indicate direction of 90% straw hole 2 lb package Priority Mail. You pay shipping only. Lower 48 states
Selling With No Reserve! Hi! I have for Auction here a 16" dia. x 3" wide cast iron flat belt pulley. The shaft size is 2-1/2" There are no cracks/breaks that I could see. Would also make a nice decor item. See Pictures. Get yourself a great deal here. NOTE: I add a $1.50 on all my Priority Mail& $2.00 on regular packages for handling and supplies plus the 9% that eBay charges me on shipping(which is already included) I have people leaving low DSR's on shipping cost's and I really need you to decide that it is okay to pay the shipping that I have on here before you bid or don't bid on my items. Low DSR's cost me a lot as it won't bring me up in search results as quick and I also loose a 20% discount off my eBay fees. I'm selling on eBay to make a living for me& my family and I can't do the ... moreshipping for nothing. I realize that shipping prices just went up again with shipping companies but it can't be taken out on the sellers. Thanks for understanding Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately
Good Used Antique Vintage Hit& Miss Engine Era Deming Piston Pump Water Well Selling With No Reserve! Hi! I have for Auction here a good used Deming Piston Pump. It would be great to run with your old engine. There are no cracks that I can see. Help yourself to a good deal. Happy Bidding! I do combine shipping whenever possable. Local pickup is always welcome. For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: ... moreOur items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Demolition. Junk Removal, and
This Novo engine needs a muffler and a buzz coil battery. Engie is free. Valves are stuck. They unscrew so it will be easy to fix them. Comes with manual. It is a 6 HP. This is a local pickup item. We are located in Nevada. Missouri which is about 90 miles south of Kansas City, MO on I-49. Please email with any questions. Thank you for looking.
This is a very rare original John Lauson ammeter. It is from the same John Lauson Company in New Holstein. WI, that built the Frost King hit and miss gasoline engines. They were used to test the strength of the batteries that were being used to run the engines. It is in great condition considering it's over 100 years old and I see no reason why it wouldn't work. It has the original cloth covered wire on it which is a bit tattered but it will work the way it is. It measures about 2 1/8 inches in diameter and the only thing I see wrong with it is the glass is missing. I'm sure this would be available rather inexpensively at a local clock or watch repair shop. This would be a great addition to your early agricultural memorabilia collection or would really look nice displayed with your John Lauson engine at the shows! These hardly ... moreever turn up in the wild so don't miss your chance on it. The pictures tell the story. You won't be disappointed in any way. Good Luck.
Nice old No. 2 Lunkenheimer Oiler. Nothing broken. All parts move freely. Needs a good cleaning. Buyer to pay 5.80 priority small flat rate box. Paypal preferred. No outside USA shipping.
This auction is for a non working. 1/4 scale Red Wing Hit& Miss Model Engine, Cooled Water. Latch Out Bar must be finished.
UP FOR AUCTION IS THIS VINTAGE ANTIQUE BRASS HIT. MISS OILER LUBRICATOR. NOTE: THE UPPER(MIDDLE) GLASS IS MISSING. THE BOTTOM GLASS IS FINE. ALL PARTS MOVE FREELY. THE OVERALL LENGTH IS APP 6 1/2" DIAMETER IS APP. 3 1/16" THE HEIGHT OF THE MISSING GLASS WOULD BE APP. 3 5/16" THERE IS NO NAME OR INFORMATION STAMPED ON THIS OILER. BRASS HAS GOOD SHINE. I WILL SHIP IT 2-3 BUSINESS DAYS AFTER RECEIVING PAYMENT. THE PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION ENDING. I ONLY ACCEPT PAY PAL. SORRY I DO NOT ACCEPT RETURNS. THANKS FOR VIEWING THIS ITEM. FEEL FREE TO E-MAIL WITH ANY QUESTIONS.
1 Cast Iron Pulley Wheel Flat Belt Hit Miss Engine Steampunk Vintage Always a 99¢ starting price& no reserve auction! All auctions end on SUNDAY NIGHT so don't miss out! Description: Vintage flat belt pulley/wheel. Condition: Good condition. Rusty, dirty and primitive looking. Approx. Measurements: 4 1/16" in diameter. 2 1/8" wide, diam of inner hole 1 3/16" Made in: USA most likely Color: Rust steel color Be sure to check out my other vintage items on sale and great gift ideas: View My Other Items For Sale Add me to your Favorite Sellers Be the first to see my newly listed items! Click on pictures to SUPERSIZE- Please note in bidding. Or buying this auction you are entering into a binding contract. In bidding or buying you are agreeing to all policies stated below. You have thoroughly read the item's description. ... moreAuctions contain only what is described. Do not assume something comes with an item if it is not stated in the auction verbiage. You have enlarged the full set of complementary photographs. Our images are unedited in order to represent the item as accurately as possible to the buyer. Images can disclose identifying marks. Inclusions or defects. You understand that items are sold as-is unless otherwise stated. This policy will be void if the item is opened or modified by unauthorized parties. Customs It is common for countries to charge some form of customs duties. Taxes, VAT, or brokerage fees on items being shipped from the USA. These costs, along with country-specific importing rules and delays caused by customs, are the buyer's responsibility. We declare all items for the winning bid amount. Customs duties. Taxes, brokers fees, VAT, and brokerage fees are the responsibility of the buyer. We do not falsify customs documents to assist you in evading your lawful taxes. You have read and accepted our shipping. Payment, and return policies. eBay's Policy states: In general. You're expected to pay as soon as possible.after you win or buy an item. Thanks for looki
~LARGE ANTIQUE BRASS OILER HIT MISS ENGINE 2 1/2" DIA Hello. Welcome to our Auction! From a recent estate. Still intact. The total length is about 4 3/4" Please keep in mind that most of our items are old and used and will show normal wear. Please look closely at the pictures and e-mail with any questions before you bid. Thank you for your interest. We strive for 100% customer satisfaction. If you are unhappy with your purchase. Please contact us before leaving negative feedback. You may also call us during normal business hours(eastern time) with any questions or concerns: 734-219-3612. Please note that because of our large sales volume. We may require up to 5 business days to ship your item. Please keep this in mind when you bid. Thank you for your interest in our auction. inkfrog terapeak. InkFrog Analytics.
This is a Mixer Needle Valve& Spring for an old Fairbanks Morse Z D Stationary/ Farm Engine.This assembly comes as shown& is in good useable condition. This came from a running engine& worked fine. This fits both the 1 1/2& 2 HP version of this engine. It is in USED/Useable condition.The pic's may or may not be of the actual item selling& are meant to represent what the item is& the general condition of it. If this is an issue please contact me& I will let you know& get a pic of actual item if it is not the one shown. These are part's that are pretty tough to locate. In useable CONDITION,If at all. Any? or more pic's please ask. I do have quite a few parts for this model engine.So if in need of some thing, please ask. ALSO.If wanting any of these parts separate.Please let me know, I usually have ... moremore that I can list that way. Ship cost for lower 48 U.S. Others please email for cost.U.S. Checks& M/O welcome, others are paypal only.Always glad to combine shipping when possible. Thanks
very nice powell's patent oiler 1885 pat nice about 4 inches tall
unmarked sparkplug.Sorry I'm not a sparkplug guy.but I'm happy to answer questions.Yes I combine and ship to USA addresses only,Thanks for looking!
This is a real nice original brass steam whistle. It measures about 1 5/16 inches in diameter and about 6 1/4 inches tall. It is in good condition for it's age with no cracks. Breaks, or repairs of any kind but does have some wear and dings from living in an old blacksmith shop for several decades. It has 1/4 inch pipe threads which are in great shape. It has a few very minor wrench marks on it but all in all it's pretty darn nice! It has a very unusual body that I can't say that I've seen before. These small whistles were commonly found on popcorn wagons and other small steam applications and are very tough to find in the wild or even at swap meets! This one would look great on a small steam engine or on your display shelf! The pictures tell the story. You won't be disappointed in any way. Good Luck.
This is an extremely hard to find original Ensign carburetor for a Caterpillar tractor. It may have other applications. As well, but it came off of a Caterpillar. I believe it is for a Model 20 or 30 but please do your homework. It mounts to the manifold on 2 11/16 inch centers and has a 1 1/2 inch throat. The air intake is 1 7/8 inches in diameter and mounts with 4 holes on a 2 1/4 inch square bolt pattern. The body of this carburetor is bronze and the fuel chamber is diecast, I believe. Everything seems to move as it should on the carburetor. It is missing a few small pieces like the fuel height knob and the bolts that hold the chamber to the body but these should be findable parts. The drain on the bottom of the intake neck has been brazed a long time ago and could be dressed down a bit. All in all this is a very rebuildable carburetor. ... moreIf you've been looking for one you already know ho tough they are to find so don't miss this one. It would even make a good spare on the shelf. I sold a few of these a couple years ago for over $650 and I know they haven't made any more of them! I can always be reached at 262-573-1931 if you'd like to talk about it. The pictures tell the story. Good Luck.
This is an original International Harvester Type R rotary magneto. It was standard equipment on the 6hp Type M engines as well as the 1. 1 3/4, and 2 1/2hp Mogul engines. It was also an option on the vertical IHC Famous and Titan engines as well as the 2 1/2 and 4hp horizontal Famous engines. It could probably be made to work on other engines as well. It needs a bit of attention in the base as can be seen but this should be a fairly easy repair. I've seen lots of these milled out and an aluminum insert added inside the perimeter of the base and it is very hard to tell. It would also be a very solid repair. It has minimal wear in the bearings and turns over with decent magnetic pull. I'm sure with a disassembly and some light cleaning it would probably work just fine. The nice part is that all of the parts to rebuild it are available ... morerather inexpensively from several of the hobby magneto shops. These original Type R magnetos are rather tough to find even at swap meets. Let the pictures be your guide. Good Luck.
This is an extremely nice 1 inch Pickering governor for a steam engine or tractor. It was made by the Pickering Governor Company in Portland. Connecticut. It is in excellent condition with no cracks, breaks, or repairs of any kind. It turns nicely and has very little wear. The horizontal shaft has been bushed and it is nice and tight and ready for years of service! It has the original drive pulley on it and the gears have no noticeable wear on them. The 1 inch pipe threads are in great shape. Everything on this governor moves freely. I would say this governor is ready to be put to use! It measures about 19 inches tall overall. These governors are almost impossible to find in the wild or even at swap meets so if you've been looking for on here's your chance. It will be a long time before another one turns up and it probably won't ... morebe this nice! All of the hard work is done! The pictures tell the story. You won't be disappointed in any way. Good Luck.
This is a very hard to find original crankcase oil sight gauge for a Rumely Oil Pull tractor. It in in excellent condition and almost looks like it could be NOS. There are no wrench marks on it anywhere and the 1/8 inch pipe threads are in perfect condition. It has the original drain on it. As wall. It measures about 4 1/2 inches tall overall and appears to be ready to be used on a tractor. It could be used to measure the oil in any crankcase but was factory equipment on the Oil Pull tractors. If you've been looking for one to complete an authentic restoration, here's your chance. It would even be a good spare on the shelf! I have seen these sell for over $200 here on Ebay so don't miss this one. The pictures tell the story. They just don't get much nicer. Good Luck.
This is an original cylinder oiler for an International Harvester Mogul or Type M gas engine. It's in excellent condition and only needs some minor cleaning. It has very little wear or wrench marks on the hex and everything seems to work as it should with no cracks. Breaks, or repairs. Both glasses are good but it may need new gaskets which is the fun part! It has the original checkball in the base and the 3/8 inch NPT threads look great. It measures about 2 1/8 inches in diameter and about 5 3/4 inches tall and would look good on a 1, 1 3/4, or 2 1/2hp Mogul or a 1 1/2 or 3hp M engine. These oilers are getting harder to find every day! The pictures tell the story. Don't miss it if you'd like to make your restoration authentic. Good Luck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fb08b87cd-0xff-
Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. You are bidding on a Maytag Model 92(model 19) Multi-Motor. Has hard to find spark plug cover and champion plug. Old repair to kick pedal see pictures. Good one to ad to any collection. You dont see model 19 for sale often in any condition. let alone this Nice =*RARE MODEL 19*= see pictures they are part of the description. i take alot. You get what is in picture. Nice running engine. I have not ran this engine myself but have seen it run. ready to show or ... morego ask questions Item is used and not cleaned up by me. I will be listing alot of these old engine this year if you are looking for a project just ask i most likly have it. Look at the pictures they are part of description. Thanks for looking.Please read below. PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 3 days of auction ending. Please dont bid if you cannot or do not want to pay for the item. SHIPPING: I will be using USPS flat rate shipping plus delivery confirmation when possible. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. I do not use shipping fees to make money. Free pick up is always offered. I will ship this item any where. Ask for cost before bidding. Listed shipping cost is for us only. Check out my other listings. Ask question or give me a call 615 335 9722 Jason Leave a Msg. GOOD LUCK AND HAPPY BIDDING! Posted with
Here is a real nice original cast iron magneto gear for a Fairbanks Morse gas engine. It is part number ZB 142 and measures about 3 11/16 inches in diameter with a 1/2 inch face. It has a 3/8 inch hole for the magneto armature shaft and the keyway is in great shape. It has 35 teeth and they are in great shape. They have very little noticeable wear if any at all. I believe this gear is for the 3 and 6hp Z engines with a rotary magneto and ignitor ignition. This gear has no cracks. Breaks, or repairs of any kind and is ready to be put to work on an engine. The gear you receive may not be the one in the photos but it is just as nice as it as I have more than one of these. These originals are getting pretty tough to find. Don't miss it. Good Luck.
VINTAGE BURR MILL-CORN-WHEAT-COFFEE GRINDER-FEED MILL-HIT MISS ENGINE DISPLAY FRESH INDIANA FARM FIND=VINTAGE BURR MILL-CORN-WHEAT-COFFEE GRINDER-FEED MILL-WITH PULLY FOR MOTOR-THE BURR DOES SHOW WEAR AND USE FROM OVER THE YEARS BUT STILL GRINDS CORN(AS SEEN IN PHOTOS)NO CRACKS OR WELDS ON THE IRON- NICE ITEM FOR A HIT MISS GAS ENGINE-GREAT DECOR PIECE FOR THE RESTAURANT-BAR- FARM OR RANCH-MUST SHIP TO A STREET ADDRESS-CHECK MY OTHER ITEMS-SOME WITH FREE SHIPPING=SUPER-SIZE THE PICTURES FOR A BETTER LOOK! Before bidding… make sure you have read the description carefully. I describe the condition of the item; markings. Dimensions, flaws, and other comments to help you understand what may not be seen in pictures. Ask questions: Always. Always, always do this if you are unsure about what you are bidding on or need to know ANYTHING about the ... moreitem. Message me on eBay and I will promptly reply. We all work hard for our money- if you’re going to spend it with me, I want you to be satisfied. Shipping: Shipping costs on auction items are calculated along the basis of item weight and size. I WILL NEVER tack on handling fees or“made up” service charges. Combined Shipping: When multiple items can be packed together to save money and ship safely. I gladly will. I make nothing on shipping. Simply request an invoice before paying. Payment: this is simple. Pay Pal. It’s free to register and cost nothing to use. Payment is politely expected within 48 hours of winning the item. If the item is not paid for within 4 days, eBay will open an unpaid item case automatically. I will not turn off the unpaid item case. So this is pretty simple- If you are the winning bidder, Please pay for it. I strive to sell quality merchandise. I’ll pack your purchase carefully for shipment and hope win your confidence to become one of my many repeat customers with customer service like no other. Check out my“No Hassel Return Policy. Returns& Damaged Items: If your items arrives damaged: Step#1. Relax. It’s insured(at my expense) and you W
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being spent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach Part: Model 92 31 Flywheel serial number 402059. Condition: original. Description: Cleaned up original Flywheel for the Maytag model 92 or 31. A nice original part to add ... moreto your restoration project. Questions? Call(712) 490-5596 Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word!
Here is an original rocker arm and mounting bolt for a 1-1/2hp IHC M engine. It is in great shape and ready to use. No cracks. Breaks, welds! If you pick this part up at my house 7% sales tax will be added to the purchase price. If it is shipped or delivered out of state then there will be no sales tax. If you have the proper exemptions then also there would be no sales tax. My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. ... morePlease feel free to ask any and all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapist if you need help. So if someone doesn't pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven't caught on this is supposed to be mildly funny but yet serious at the same time. I will only accept returns if there is an error in my listing. If you decid
For auction is an original wing nut for an IHC gas engine. This holds the valve cover on. I cleaned it up and shot a rustoleum on it but it could use a final top coat. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. I will combine shipping whenever possible to try and save money. Many of the items I list I know very little about. I try and describe them the best I can but I may miss information or may not know exactly what I am looking at so please ask questions. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check out my other auctions. Thanks. I am currently traveling ... morea lot for work so I am mostly shipping on the weekends. I will try to ship your item as soon as possible but it may not go out until Saturday or Monday depending on my schedule. If you have any problems with your purchase please contact me through ebay. Thanks. McCormick engine LA LB mickey mouse
Here is a governor for a 3hp Fairbanks Morse Z igniter style engine. It is in good shape. There are no cracks. Breaks, or welds. It does have a fair amount of wear, it should probably work fine though No cracks. Breaks, or welds Has some wear. Hard to find. If you pick this part up at my house 7% sales tax will be added to the purchase price. If it is shipped or delivered out of state then there will be no sales tax. If you have the proper exemptions then also there would be no sales tax. My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything ... moreI sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any and all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just being a looser. I am sure there are other excuses also but I don't care and don't want to hear them. I have no interest in any bidders personal problems, talk to your pastor or therapist if you need help. So if someone doesn't pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven't caught on this is supposed to be mildly
This is an EXTREMELY hard to find original fuel mixer for a Fuller and Johnson throttling governor kerosene engine. It is in good condition with no cracks. Breaks, or repairs. The fuel needles are stuck but I'm sure they would move with a little heat. This mixer mounts to the engine with 2 bolts on 3 inch centers. It is for a 7hp engine but may fit other sizes as well. It could always be adapted to fit your engine as these mixers for engines of any size are almost impossible to find. With just a little elbow grease this will be a perfect mixer. If you need one for any reason don't miss it. It will likely be a long time before another one turns up. The pictures tell the story. Good Luck.
This is a very hard to find early style Penberthy water injector for a steam boiler. It is part number AA21 and is a 1/2 inch injector. It was patented on July 23. 1889. It is in great condition for its age with no cracks, breaks, or repairs of any kind. It has some slight impact marks on it from its years of use but looks like it has a lot of life left in it. It is missing two of the tail nuts but I believe these are available from someone that reproduces them. These 1/2 inch injectors are very expensive new and they just don't look as good as the old ones so if you've been looking for one for a project or a restoration here's your chance. These don't turn up in the wild or even at swap meets very often so don't miss your chance on it. The pictures tell the story. You'll like it. Good Luck. 7:ce.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13fb1de4169-0xfb-
This is a very rare original pressure operated ignition switch for a Leader hit and miss gas engine powered air compressor or water pump. It is in exellent condition with no cracks. Breaks, or repairs of any kind. It measures about 4 1/4 inches wide at its widest and about 4 inches tall. It needs a new torsion spring on the needle but this should be pretty easy to make. It is made almost entirely of brass and has the original name tag on it. It has 1/4 inch female pipe threads and they are in great shape. These ignition cutout switches are almost impossible to find in the wild or even at swap meets so if you need one for an authentic restoration here's your chance. It will likely be a long time before another one turns up and it likely won't be this nice. The pictures tell the story. You'll like it. Good Luck.
This is a real nice original camshaft for a Ford Model T car or truck engine. It is in excellent condition with no cracks. Breaks, or repairs of any kind. It measures about 23 inches long and is ready to be used in an engine. It has no noticeable wear and includes the center bearing. These don't turn up very often so if yours is broken, repaired, or just worn out here's your chance at a good one. It sure beats the expensive reproducitons! The pictures tell the story. You'll like it. Good Luck.
A Very Small Hit Miss Steam Engine in nice condition. This tiny one would be great to take along and display at the steam engine shows! It runs real nice on compressed air. Check out the video. Measures 5 1/2" on length by 2 1/8" wide by 3 1/2" high. Don't Miss It! Shipping is by Priority Mail.
Up for bid is a very nice Maytag Model 92 Antique hit miss Gas Engine. The flywheel has serial# 687190 stamped on it which was in production in January. 1936. I have been restoring these engines for over 10 years now and I sell a lot of them. I also used to restore Maytag ringer washers and put Maytag motor's on them as well. This engine was completely taken apart and sand blasted and bead blasted clean and painted with DuPont Maytag original color code. I take a lot of pride in these motors and I like to do a little extra detailing like the lettering and some of the numbers as you can see in the pictures, I think it makes the motor's stand out better. The flywheel has very little pitting as you can see in the picture but will not affect the performance of the engine. Lots of people like to take the same pictures as I do and try to ... moreconfuse the buyer. I don't like the way they do things but I have no control of that. But I put my own trade mark on my engines then I know it is on that I restored proper. You can see this engine is complete and not missing any parts such as the pulley or air cleaner or kill switch. It has new rings, condenser, spark plug wire with new ends, new spark plug, caution plate and kill switch. I also honed out the Cylinder jug. Magnet ring was recharged as well and throws a real nice hot spark. This engine has been restored and freshly painted and the tank and top plate was sealed so it will not rust again. I do not paint the flywheels like some people. After putting it all back together I ran 1 tank of fuel through it and it runs just fine. Detailing with the correct decals finished it. I cannot put a warranty on these motors do to the age of them BUT I will guarantee it will run great for you when you get it and keep running well. I have sold a lot of motors and washers and never had a complaint yet. My friend deals in Maytag motor parts and he took the carburetor apart cleaned and rebuilt it and also rebuilt the ignition plate putting a new condenser on. He also takes pride w
This is a real nice and early Century"Invincible" open frame electric motor. According to the fancy brass serial tag it is 1/4 horsepower. 104 volts, and 1750 rpm. The last patent date is 1900 so it's pretty early. It is in excellent condition with no cracks, breaks, or repairs of any kind. It has an original type cloth cord on it. It has an excellent amount of original paint on it. I've tested it and it starts up and runs very nicely. It is quiet and very smooth. It has a cast iron mounting platform. The motor is about 7 inches in diameter and about 9 inches long overall. It would look great running an early electrically belt driven implement or would look just as nice displayed with the rest of your early electrical devices. These early period electrical items are getting harder to find every day so don't miss your ... morechance on this one. The pictures tell the story. You won't be disappointed in any way. Good Luck.
A vintage tiny brass with glass cylinder oiler in very good condition. No damage seen. Measures: 1 3/4 inches overall height. And 13/16 inch width at widest points. Thread size is 3/8 inch diameter. Terms: Please make payment within 3 days. Please ask questions before bidding.
Vintage Brass Fuel Primer Cup. Hit and Miss Engine. Appears Nickel Plated. Needs cleaning and polishing. Has been stored for years. Powered by The free listing tool. List your items fast and easy and manage your active items.
Antique Ex-Cell-O Spindle Oiler Essex Brass Corp Detroit Hit Miss Gas Engine Up for bids is a vintage brass oiler. This item is in very good condition. With no breaks or repairs. The top is clearly stamped: Ex-Cell-O Spindle Oiler. Made by Essex Brass Corp; detroit, USA" The top and bottom sight glasses are both very good with cracks. And the top one has a marked"Re-Fill" line. Everything works as it should, but could use a new lower gasket. This small oiler will be a welcome addition to your project. Parts bin or collection, offered at a Low start price with no reserve. Please see the pictures for actual item and better description. And email any questions. I am accepting Paypal, and only ship within the U.S. Lucky winner will please add 4.80 for priority shipping costs in the U.S. I will combine wins to ease shipping costs, ... morebut will not end auctions early, so please don't ask. This is unfair to faithful bidders and watchers. Thanks for looking, and Good luck! I will ship up to 60 lbs of hand tools and small items for only 9.80; so grab a few wins. And save! More antique tools and other vintage items will be listed in the coming days. My low start prices do not reflect inferior quality. But make the auctions more fun, as well as allowing collectors to determine the fair value. Thanks for your time, and Have a Great Day.
Im selling for a friend a AERMOTOR 8 CYCLE model Hit Miss Engine needs to be finished my buddy lost interest in it. And I have no time to do it. the machining not to bad the only things I did to the engine is he needed me to seat the valves so I know they do not leak, and I made rings and the engine has compression when I block off the holes in block. the crank shaft runs true the flywheel has no run out. the ignitor not finished, I think it wouldn't take much to get running. looks like it needs a set screw for the cam. I think its a 1/2 scale engine. free shipping lower 48 only Check out my other items!
This offering is for a rebuilt Carburator for the 1927-1937 Maytag Single cylinder Kick start engines. Various models like 92-31-B-11.111 take this carburetor. This one in particular was dismantled cleaned. Polished and reassembled with a new Air Valve, Air Valve Seat and Spring, Needle Valve, Tab Washer, Original snap ring and intake screen. If you want to use an Air filter Assembly remove the ring and screen and install the filter. Ready to install your feed tube and run. I have been rebuilding Maytag Carburetors for many years so rest assured its correct and will run your engine as well as your engine is capable. I do custom work all the time. You need your carburetors or Ignition plates reworked or a whole engine we can help. Buy It Now available for all purchases. We have all the parts you may need for your Maytag Carburetor. Don't ... moresee it listed? Just ask we will list it for you. QUESTIONS ABOUT MAYTAG ENGINES OR OTHER PARTS? CALL 419.358.5206 We will help you out. We are your most trusted and experienced resource for Original Equipment and Quality New Replica parts made to fit the Maytag Multi-Motor on Ebay selling here since 1998) And 34 years overall experience with the Maytag Multi-Motor. This is longer then some of the collectors around me have been alive. We've vended and displayed at shows from the East Coast to Iowa and Minnesota. And from Ontario Canada to North Carolina for the better part of 34 years. Just about the whole Northeast portion of the US. Its been a pleasure to meet so many people all over the North American continent and across the waters. If your Maytag engine needs it most likely WE have it! Just ask, no part too small. Also offering Custom Carburetor and Ignition System repair and rebuilding, No one on Ebay with more experience. Ebay BIN available for all special orders and custom work. PLEASE READ THE DETAILS AFTER THE PICS They are as important to read as the item description. Please check out the Maytagclub.com The club*Web site* is a great Free to visit historical resou
We Have MaytagParts! If I do not have it listed just ask. I probably have it and will list it for you. This offering is for a block for a twin cylinder Maytag Gas Engine. A very nice block with good used tight bearings! Minimal wear to the bearings. Checked out! If you have an engine with worn bearings then here is your easy fix. Its been totally cleaned up and inspected. No flaws I can find. The price we are asking is about what you might expect to pay for just new bearings. Not counting cost to get fit at a machine shop. The block has been primed after cleaning. QUESTIONS ABOUT MAYTAG ENGINES OR OTHER PARTS? CALL 419.358.5206 We will help you out. PLEASE READ THE DETAILS AFTER THE PICS They are as important to read as the item description. First off let me say I have been in this hobby for over 33 years so likely I have seen it or done ... moreit. Let my 30 plus years of experience work for you. I pretty much know what works and does not. And I ferret out the junk so you don't ever see it. Odds are If someone else is selling it but I am not. I have seen it but do not like something about it so I refuse to handle it. I will not sell it if its not GOOD Stuff. See the feedback comments on my products. When I bought my first Maytag in 1979 I didn't know much about them, we had no Internet to research with and general interest in them was lackluster as a rule. I had to learn by the school of hard knocks, personal experience, from Maytag's Service Manuals and from others, many of whom worked on them when they were still in service everyday but these fellows are now passed. So let me pass on the info and help I received. Call by chance 419.358.5206 9am to 8pm EST BIN available for special requests. Also offering Custom Carburetor and Ignition System repair and rebuilding. Ebay BIN available for all special orders and custom work. To learn more about Maytag Multi-Motor Engines check out the Maytag Collectors Club web site at www(dot)maytagclub(dot)com If you have any technical questions about your Maytag engines do
Here is a great old Hit Miss 2 3/4 HP engine. It moves freely and has a great old brass tag on it. Should be no issue putting this baby into operation. I am willing to hold up to 60 days if paid for. I would palletize and prepare for shipment if buyer cannot pick up and deliver to a local terminal if necessary. Any questions. Please let me know. Posted with
This is a Small#2 Feed/ Corn/ Coffee/ Grain Grinder.That can be used& adapted to a number of different purpose's. A lot of folks take the Crank off& install a pulley& run it off a Hit n Miss type engine to grind corn or? at the engine shows or threshing bee's etc. It is in Very Good Used condition with only a small piece of one corner of the base damaged& no welds. It will also need new wood on the crank handle. If planning to use it with the crank. As can be seen in the 1st& last pic.it is not something that would effect it's use in any way. Any? or more pic's.please ask.This is about 16" tall& about a 5" opening. Due to the large diameter of the flywheel type crank assembly. The shipping weight of this will be rather heavy.It will weigh right on 45 lbs. packed& ready to go. I do reserve ... morethe right to correct ship cost,as I have had it be inaccurate before. THANKs
You are bidding on a vintage brass and glass hit and miss engine type oiler. This oiler measures 1-1/2"wide x 4" tall and has 1/2" threads. Take a look at the pictures and see the oiler you will be getting Posted with
Antique D.T. Williams brass swing top oiler No. 6 hit miss steam engine from an estate. Looks to be in good condition. No cracks in the glass. Picture 3 shows the marking on top. Its just how I found it. I haven't attempted to clean it in any way. If you have any questions or need an additional picture added please ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13fb5ac3940-0x105-
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 5 1/4" tall. Good condition. Marked on top"Lukenheimer No. 0" All brass except for the glass parts(see picture) Please email me any questions. Buyer pays $6.95 shipping in the U.S. for Priorty mail. Foreign shipping is more. Well. The P.O just raised shipping charges again. 33% increase on foreign shipping. I will keep my shipping charges as low as possible, and I will combine shipping to save you as much money as possible. But with these increases and ebay still taking 10% of your shipping charge, and Paypal taking 5% of the shipping fee, it is getting hard. I will still ship overseas, but the minimum shipping charge for overseas shipping is $29.95. Foreign bidders MUST, MUST, MUST email me for the shipping charges before bidding. NO EXCEPTIONS. Please email ... moreme any questions. Thanks for looking. Inkfrog terapeak. I000000.
Up for bids is a very old antique oiler by Lunkenheimer No.0 Fig 1298 Royal hit& miss nice piece made in the U.S.A. The item is used so it is(sold as is) and S/H is $4.95 to the lower 48 states. Thank you and Good Luck.
This is a VERY rare original Massey Harris Tractors watch fob. It is in excellent original condition with no cracks. Breaks, or repairs of any kind. It has very little pocket wear. It measures about 1 9/16 inches wide and about 1 1/2 inches tall. It says"From Your Massey Harris Dealer" on the back. It was made by the Metal Arts Company in Rochester, New York. It has a Massey Harris Challenger tractor on the front and is on the original leather strap. These original fobs rarely turn up in the wild so if you've been looking for one don't miss it. It would be a great addition to your Massey Harris memoribilia collection or display. The pictures tell the story. You won't be disappointed in any way. Good Luck.
Vintage BRIGGS& STRATTON? Hit& Miss Gas engine motor with Delorto Carb breather cap filter. Motor looks complete. Motor spins freely, don't feel like there's much compression on this motor. I believe this is a 1 HP or 1 1/2 HP motor. No marking found. Motor has rust, muffler is rusted and bent, inner gas tank has rust but appears solid. Features a neat plastic Dellorto breather assembly that mounts to carb. I believe there is spark, had my hand hand on wire and got slight shock while pulling with a old rope. This motor being Sold as Non running motor for parts or repair. Sold as is as Found. What you see is what you will get. Measures approx. 11 3/4" Tall x 14" long x 10 1/2" deep. Filter and sparkplug will be removed for shipping.
This is an original exhaust rocker arm and stand for a Fairbanks Morse Z gas engine. It is in excellent condition with no cracks. Breaks, or repairs of any kind except for the small oil cup on the socket end which would be and easy replacement. It mounts with a 5/8 inch hole and the rocker arm measures about 5 1/2 inches from the center of the valve tab to the center of the push rod socket. The stand has a part number of ZCD41A3 and the rocker arm is ZCA38A. I believe it is for a 3hp Z but measure your engine to be sure. These are often broken or repaired on engines so if you need one for any reason here's your chance. The pictures tell the story. You won't be disappointed in any way. Good Luck.
This is a pretty scarce original Port Huron steam traction engine watch fob. It is in great condition with no cracks. Breaks, or repairs and has VERY little wear. It measures about 1 5/16 x 1 5/8 inches tall and has a new leather band on it. It would be a great addition to your early steam or watch fob collection or display. These original Port Huron fobs rarely turn up in the wild or even at swap meets so don't miss your chance on this one. The pictures tell the story. You won't be disappointed in any way. Good Luck.
You are bidding on a really nice. Hard to find Maytag script, 1/2" Champion spark plug. The red lettering is in excellent shape and nice a dark! These don't come up for sale every day so dont pass it up! Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a very nice. And super hot, backplate for a Maytag 92 engine. This backplate is 100% unmolested. It has the original spark plug wire, wire holder, rubber insulator, original condensor, etc. This backplate is as nice as they come and it throws a heck of a good blue spark. I've sold dozens of these and have never had an unhappy customer yet. If you get it and it's not hot, send it back within 7 days for a full refund! NO dissapointments. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a nice. Original flywheel inspection cover for a Maytag 92 engine. Great shape. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a super nice cylinder for a Maytag 92 engine. The bore is perfect. And very unworn. Great shape. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a nice kickstart and segment gear for a Maytag 92 engine. Great shape. No damage. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a very nice ratchet cover and ball oiler for a Maytag 92 engine. Great shape. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a very nice air cleaner for a Maytag 92 engine. Great shape. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a very nice complete governor assembly for a Maytag 92 engine. Great shape. Feel free to ask questions. Good Luck and Happy Bidding!
You are bidding on a very nice carburetor choke for a 3-5hp IHC LB or LA engine. It's in great shape and ready to use as soon as you get it. No damage. Feel free to ask questions. Good Luck and Happy Bidding!
Remco sight glass oiler. model number E 7 s. e. e. 3/8 fitting. should clean up very well. Posted with
ANTIQUE VINTAGE HIT MISS ENGINE LINE SHAFT FLAT BELT PULLEY WHEEL~WALL ART~URBAN I HAVE AVAILABLE A VINTAGE FLAT BELT PULLEY HIT MISS ENGINES MEASURES 13-1/2" DIAMETER X 2-1/2" WIDE AND THE AXLE OPENING IS 1-1/2" GREAT CONDITION WITH NO CRACKS OR BREAKS GREAT TO USE OR FOR DISPLAY I ALSO HAVE ANOTHER FLAT BELT PULLEY LISTED IN THAT IS THE SAME SIZE WILL COMBINE SHIPPING PLEASE SEE ALL PICTURES FULLY INSURED SHIPPING ANY QUESTIONS. PLEASE ASK THANKS FOR LOOKING! Payment needs to be received within 4 days of auction ending(unless contacted) or an unpaid item notice will be issued and the item will be relisted. Illinois residents will need to pay Illinois Sales Tax Will ship the least expensive way. If you are not happy with your purchase and need to leave less than a 5 star rating. Please contact me before leaving feedback, so ... moreI can correct the problem. Buyer responsible for return shipping cost if not happy with purchase. MONEY BACK GUARANTEE! inkfrog terapeak. I000000.
ANTIQUE VINTAGE CAST IRON STEEL WHEELS SMALL SIZE 12" HIT AND MISS ENGINE CART Description It is used and is sold as is and there is no warranty expressed or implied. WE ARE NOT EXPERTS SO PLEASE REVIEW PICTURES AND ASK QUESTIONS IF YOU SEE SOMETHING YOU THINK WE MAY HAVE MISSED. WE DO NOT ALWAYS SEE OR NOTE EVERY IMPERFECTION BUT TRY TO TAKE A PICTURE FROM ALL ANGLES FOR YOU TO VIEW. PLEASE NOTE: WE DO NOT ATTEMPT TO CLEAN ANY OF OUR ITEMS AND LEAVE THAT TO THE BUYER IF THEY CHOOSE. WE HAVE HUNDREDS OF VINTAGE TAGS SO CHECK OUT OUR OTHER LISTINGS. WE DO COMBINE SHIPPING IF YOU WAIT FOR AN INVOICE. WE ARE SELLING ITEMS FROM ESTATES AND FOR MULTIPLE COLLECTORS WHO HAVE DECIDED TO DOWNSIZE. SOME OF THE ITEMS WE WILL BE POSTING INCLUDE VINTAGE MILITARY. GAS AND OIL, GLASSWARE, ANTIQUE CLOCKS, VINTAGE CAR PARTS AND MUCH MUCH MORE. WE ADD ... more50-100 NEW AUCTIONS ON A WEEKLY BASIS SO MAKE SURE TO ADD US TO YOUR FAVORITES. Check out my other items! Be sure to add me to your favorites list! Good luck with the Bidding! ONLY PAYPAL IS ACCEPTED AS PAYMENT. ANY ITEM MAY BE RETURNED WITHIN 14 DAYS FOR A COMPLETE REFUND OF THE PURCHASE PRICE BY PAYPAL PAYMENT. IF YOU HAVE ANY QUESTIONS ON THE ITEM LISTED. PLEASE ASK BEFORE BIDDING. WE WILL REPLY WITHIN 2 DAYS OF RECEIVING IT! THANK YOU FOR LOOKING AT OUR AUCTIONS AND GOOD LUCK!
Lunkenheimer Glass Bottle Drip Oiler Hit and Miss Engine Found at a local estate auction. In very good clean condiion NOTE: I have other oilers up for auction and will combine shipping costs Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded ... morefor non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
Lunkenheimer No.2 Fig.1300 Sentinel Brass Hit and Miss Engine Glass Oiler UNUSED Found at a local estate auction. In excellent unused condition no signs of any oil being run through this so I will sell as unused. No issues both glass pieces are good and gasket is good as well NOTE: I have other oilers up for auction and will combine shipping costs Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED ... moreTO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are only refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
This is a Fairbanks Magneto"X" for an old single cylinder Fairbanks Morse& many other Stationary/ Farm Engines. This fits quite a few of the old engines. Just by installing the proper gear for the application.It is in very good USED condition,with a nice spark& good cap.This is a part that is pretty tough to locate, in GOOD CONDITION.The pic shown are of actual item selling. Any? or more pic's please ask. This has no cracks,breaks or welds.Ship cost for lower 48 U.S. others please email for cost. Ship cost INCLUDES INSURANCE on this item.For lower 48 U.S. only. Thanks
LUNKENHEIMER No 1 1/2 BRASS OILER HIT and MISS STEAM ENGINE 1300 SENTINEL Item Description Offered for auction is a I have pictures for you to view condition. please email me if there is something I can visually answer. Or if you need more pictures. Please keep checking my list over the next couple of weeks because I will be listing many hard to find quality items purchased from a recent estate. Thank you for viewing this auction and good luck bidding! NO RESERVE! THANK YOU& BEST WISHES! Shipping& Payment inkfrog terapeak. InkFrog Analytics. F3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fbbf12ca7-0x101-
This offering is for one nice little but big priming cup for some old one lunger or maybe a car. 1/4" threads and it stands over 2.5" tall plus the handle. This was in a larger engine of some type. Its a nice primer to look at. Its not worn out. Slight rounding to some of the hex edges but not horrible. It will polish up if you want but I left the patina in case someone wants it all natural. See the shipping calculator for cost to mail. Weekends and Holidays will delay communications and delivery to the mail a bit. Please allow at least 5 days handling on purchases. But usually its next day shipping. Check out my feedback and bid with confidence. Thanks for looking. Mark.IMYMD/INFY
YOU ARE BIDDING ON AN OLD TINY ALUMINUM ZENITH CARBURETOR. UNKNOWN APPLICATION. POSSIBLY EARLY CLINTON? 1940s. CLEANED BUT CONDITION UNKNOWN. NEEDS A BOWL GASKET. HAPPY BIDDING. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13fbbf12d5b-0xf3-
UNUSUAL DOUBLE VALVE* Vintage Hit& Miss. Steam Engine Oiler, Nickeled Brass This particular listing is for an UNUSUAL. Vintage Double-Valve Oiler for a Hit& Miss or Steam Engine. I see no name. Logo, or numbers to indicate the maker. The Nickel-Plated Brass body is in good. But worn condition. One of the small glass drip-tubes is broken. Overall length is 4" Body diameter is about 1-1/2" From a recent estate sale in the North-Central WV Oil and Gas Fields. If you win multiple auctions(in any category) please wait for my combined invoice before paying. I will re-calculate the combined shipping to allow discounted shipping. If you pay individually. Then your item(s) will be shipped individually- with no discount. Payment is expected within 24 hours unless you have contacted me to make other arrangements. I am willing to work ... morewith you as long as long as you communicate with me. If you have not paid- or contacted me- within 4 days. An unpaid item case will b e opened. PLEASE REVIEW THE PHOTOGRAPHS FOR ADDITIONAL INFORMATION THEY ARE SUPPLIED TO PROVIDE A VISUAL DESCRIPTION TO ADD TO THE VERBAL DESCRIPTION THAT I PROVIDED. BY BIDDING ON THIS ITEM. IT MEANS YOU HAVE 1) READ THE DESCRIPTION. 2) REVIEWED ALL PHOTOGRAPHS. AND 3) HAVE ASKED ANY QUESTIONS THAT CONCERN YOU. NO RESERVE AUCTION! PLEASE NOTE THAT I GENERALLY SELL PRE-OWNED(USED) ANTIQUE AND COLLECTIBLE ITEMS PICKED FROM LOCAL ESTATES. UNLESS SPECIFICALLY STATED ABOVE THAT AN ITEM IS NEW AND UNUSED. YOU SHOULD EXPECT THE LISTED ITEM TO HAVE THE NORMAL WEAR AND TEAR ASSOCIATED WITH"USED" MERCHANDISE. I DO MY BEST TO DESCRIBE ANY SIGNIFICANT FLAW THAT I SEE, BUT, BEYOND THE OBVIOUS APPEARANCE DETAILS, I MAKE NO GUARANTEE ABOUT INTERNAL FLAWS OR MERCHANTABILITY(OR APPLICATION) ISSUES. IF YOU EXPECT AN ITEM TO LOOK AND PERFORM LIKE A NEW ITEM. THEN YOU SHOULD BUY A NEW ITEM- NOT A PRE-OWNED ONE. PART
Vintage Hit& Miss Engine Oiler. Brass*Lunkenheimer#5 Fig.1300 Sentinel* VGC This particular listing is for a vintage LUNKENHEIMER No.5 Fig 1300 SENTINEL OILER in very nice used condition. From an estate sale in the North-Central WV Oil and Gas Fields. If you win multiple auctions(in any category) please wait for my combined invoice before paying. I will re-calculate the combined shipping to allow discounted shipping. If you pay individually. Then your item(s) will be shipped individually- with no discount. Payment is expected within 24 hours unless you have contacted me to make other arrangements. I am willing to work with you as long as long as you communicate with me. If you have not paid- or contacted me- within 4 days. An unpaid item case will b e opened. PLEASE REVIEW THE PHOTOGRAPHS FOR ADDITIONAL INFORMATION THEY ARE SUPPLIED TO ... morePROVIDE A VISUAL DESCRIPTION TO ADD TO THE VERBAL DESCRIPTION THAT I PROVIDED. BY BIDDING ON THIS ITEM. IT MEANS YOU HAVE 1) READ THE DESCRIPTION. 2) REVIEWED ALL PHOTOGRAPHS. AND 3) HAVE ASKED ANY QUESTIONS THAT CONCERN YOU. NO RESERVE AUCTION! PLEASE NOTE THAT I GENERALLY SELL PRE-OWNED(USED) ANTIQUE AND COLLECTIBLE ITEMS PICKED FROM LOCAL ESTATES. UNLESS SPECIFICALLY STATED ABOVE THAT AN ITEM IS NEW AND UNUSED. YOU SHOULD EXPECT THE LISTED ITEM TO HAVE THE NORMAL WEAR AND TEAR ASSOCIATED WITH"USED" MERCHANDISE. I DO MY BEST TO DESCRIBE ANY SIGNIFICANT FLAW THAT I SEE, BUT, BEYOND THE OBVIOUS APPEARANCE DETAILS, I MAKE NO GUARANTEE ABOUT INTERNAL FLAWS OR MERCHANTABILITY(OR APPLICATION) ISSUES. IF YOU EXPECT AN ITEM TO LOOK AND PERFORM LIKE A NEW ITEM. THEN YOU SHOULD BUY A NEW ITEM- NOT A PRE-OWNED ONE. PART OF THE CHARM OF VINTAGE MERCHANDISE IS THE IMPERFECTIONS AND NUANCES ASSOCIATED WITH ITS AGE AND PRIOR USE. PLEASE CONSIDER THESE FACTORS WHEN DETERMINING YOUR BID AMOUNT. I DO NOT ACCEPT COMPLAINTS BECAUSE IT WOULD NOT
Nnnn PLEASE NOTE THAT MY GOAL AS A SELLER IS TO ALWAYS SATISFY YOU AS THE BUYER FIRST. STRIVING FOR POSITIVE FEEDBACK WITH 5 FIVE STAR RATINGS. IF EVER THERE IS A QUESTION OR CONCERN PLEASE CONTACT ME FIRST ALLOWING ME TO RESOLVE ANY CONCERNS. You are bidding on a Fairbanks Morse Gov. Part(see pic) for The 1 1/2 and maybe other sizes Nice part for you engine. See the pictures Check out my other listing. Have other engine parts I will be listing soon Ask question if you like call 615 335 9722 Good Luck
PLEASE NOTE THAT MY GOAL AS A SELLER IS TO ALWAYS SATISFY YOU AS THE BUYER FIRST. STRIVING FOR POSITIVE FEEDBACK WITH 5 FIVE STAR RATINGS. IF EVER THERE IS A QUESTION OR CONCERN PLEASE CONTACT ME FIRST ALLOWING ME TO RESOLVE ANY CONCERNS. You are bidding on a ASSOCIATED exhaust rod holder(see pic) bolts are included Nice PART See the pictures Check out my other small engine listing. Have other Small engine parts I will be listing soon Ask question if you like call 615 335 9722 Good Luck
UP FOR SALE I HAVE A NICE ORIGINAL BEAN SPECIAL CUB ENGINE. THE ENGINE HAS SPARK AND COMPRESSION. I JUST DONT HAVE ANYWAY OF SPINNING IT FAST ENOUGH TO START IT. SOMEONE HAS SPRAYED RED PAINT OVER THE ORIGINAL GREEN AT SOME POINT. THE ANTI SPLASH CAP ON TOP HAS RUSTED AWAY, BUT THEY ARE REPRODUCED AND REPLACEABLE. THERE ARE NO CRACKS, BREAKS, OR WELDS ON THIS ENGINE. IM SURE WITH A WAY TO SPIN IT AND A LITTLE CLEANING THIS ENGINE WILL RUN. PLEASE CHECK OUT ALL 10 PICTURES AND EMAIL WITH QUESTIONS. NO SHIPPING. LOCAL PICKUP IN LAFAYETTE INDIANA. I AM WILLING TO STORE THE ENGINE FOR A SHORT TIME AND I WILL ASSIST WITH LOADING. SHIPPING COMPANIES ARE FINE AS LONG AS YOU DO THE ARRANGEMENTS.
Take a look at this! An original 1960 Chevrolet sales brochure. If you're a collector of anything Chevrolet. You'll really like this. It shows all of the new models available at the time, your interior color options, your add-on options and specifications for the cars. It's all in color, good condition and measures 11-1/2" x 8-1/8" The pictures tell the story. Good luck.
This fuel injection systems book is nice! It was published in 1945. It includes many different injection systems(including Cummins. Demco, Fairbanks-Morse and International Harvester) and shows how to service them. It is in pretty good condition(the cover is separated from the binding) has 175 pages and measures 4-1/2" x 5-7/8" The pictures tell the story. You'll like it. Good luck. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13fc04cf83e-0xf3-
Roebling Wire Rope and Wire book is a handy price list book. Revised in 1922. This book shows everything from how to order the rope to the size and weights of them. It is in good condition, has 233 pages and measures 6-1/8" x 3-11/16" The pictures tell the story. You'll like it. Good luck.
Nice Galloway flywheel gov. Weights AB 12 is part# They are Rusty but not stuck move freely.