In 
 
Order by: 
Available to: 
Price: 
 - 
$
150
Buy It Now
$12.5 Shipping
Condition: Used
Location: Bountiful,UT,USA
$
605
Buy It Now
$300 Shipping
Condition: New
Location: China
$
77
Buy It Now
$0 Shipping
Condition: Used
Location: Spring Hill,KS,USA
CLAUSING 15" DRILL PRESS No.1685 DEPTH STOP ASSEMBLY 15 and 16 SERIES. I believe this fits 15 and 16 series drill presses. The buyer should decide. ... moreThis came from a clean and perfectly working Model 1685 drill press that is shown in the last photo. Clean and very good condition with everything operating properly. Please let the pictures help with the description and condition and view my other auctions for more CLAUSING 15" DRILL PRESS PARTS. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible.
$
8.5
Buy It Now
$0 Shipping
Condition: New – Open box
Location: St. George,UT,USA
Hello, DELTA/MILWAUKEE OPERATING& MAINTENANCE INSTRUCTIONS FOR 14' DRILL PRESS Covers: TABLE ADJUSTMENTS MOTORS& SPEEDS LUBRICATION CHANGING ... moreSPINDLE PARTS LIST PARTS DIAGRAM This manual is 8 pages and comes Comb~Bound. This is a photocopy.Reprint,reproduction,copy(and looks like a copy)We did not make this manual it is a copy from the manufacturer. The manufacturer may or may not have included the info you're looking for.THANKS
$
8.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
99.95
Buy It Now
$0 Shipping
Condition: New
Location: Largo,FL,USA
$
319.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
68
Buy It Now
$39 Shipping
Condition: Used
Location: Red Bank,NJ,USA
POWERMATIC DRILL PRESS PART#1150 MODEL ALL THESE PARTS ARE OFF A WORKING MACHINE THAT WAS PARTED OUT. CHECK OUT MY STORE FOR LOTS MORE STUFF LIKE THIS. ... more732-642-8271 1150 HOOD/BELT COVER
$
1,450
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
71.57
Buy It Now
$586.96 Shipping
Condition: Used
Location: United Kingdom
$
35
Buy It Now
$22.5 Shipping
Condition: Used
Location: Bountiful,UT,USA
$
2,499
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
Jet 350018 Model JMD-18 15" Milling/Drilling Machine Milling/drilling machines, One-piece cast iron column for added support, Belt cover quick slide ... morelatch allows faster belt adjustment to change spindle speeds, Base taper allows for easier clean-up, Larger hand wheel knobs, UL Listed motor, Extra large worktable, Heavy-duty tapered roller bearings support the spindle. Resulting in greater tolerance and more accurate drilling depth, Part Number: 350018, Number of Spindle Speeds: 12, Spindle Taper: R-8, Quill Diameter: 3" Max Distance Spindle to Table: 18" Table Longitudinal Travel: 24" Table Cross Travel: 7" T-Slots Number and Size: 4 and 5/8" T-Slot Centers: 1-13/16" Drilling Capacity: 1-1/4" Face Mill Capacity: 3" End Mill Capacity: 3/4" Swing: 15-7/8" Column Diameter: 4-1/2" Quill Travel: 5" Range of Spindle Speeds: 150- 3.000 RPM, Table Size: 9-1/2" x 31-3/4" Base Dimensions: 15-3/4" x 23-3/4" Motor: 2 HP. 230 Volt only, 1 Phase, Model Number: JMD-18, Brand: Jet, Overall Dimensions: 43"x40"x44" Weight: 739 pounds, One-piece cast iron column for added support, Belt cover— quick slide latch allows faster belt adjustment to change spindle speeds, Base— taper allows for easier clean-up, Larger hand wheel knobs, UL Listed motor, Extra large worktable, Heavy-duty tapered roller bearings support the spindle. Resulting in greater tolerance and more accurate drilling depth, New positive quick-stop knob and easy-to-read internal depth gauge(external on JMD-15) 360° head swivel, Heavy-duty power downfeed with manual fine feed(JMD-18PFN) Three power down feeds(JMD-18PFN.004" 007" 01" Worklamp, Adjustable carbide facemill, Drill press angle vise, 1/2 drill chuck. Chuck arbor, Draw bar, Jet 350018 2 HP. 1 Phase Mill Drill,
$
475
Buy It Now
$150 Shipping
Condition: New
Location: China
$
156.01
Buy It Now
$0 Shipping
Condition: New
Location: Carlton,TX,USA
DRILL PRESS MILLING VISE 5" PRECISION MACHINED HD CAST IRON Use any drill press for precision milling and drilling in metal. Wood or plastic. Quick. ... moreAccurate multiple positioning Precision machined cast iron body Extra wide secure travel 5" wide adjustable jaws 56" square X and Y movement Movement calibrated to scales Name 5" Rugged Cast Iron Drill Press Milling Vise Brand Central Forge Bitmoore Color Blue Jaw opening 4-3/4 in. Mounting type Bolt Replaceable jaw(y/n) Yes Jaw Width(in. 5 in. Shipping Weight less than 32 lb. Throat depth(in. 1 in. Travel length(in. 7-1/8 in. Cross; 6-1/8 in. Longitudinal Warranty 30 Day Please take a few moments to visit my feedback REVIEWS FROM PAST BUYERS: 3/7/2013 5.0 Works as described By Alpheus from Virginia Comments about Central-Forge 5" Rugged Cast Iron Drill Press Milling Vise: It fits many drill presses. You have to be smarter than a rock to figure it out. I used this to mill some aluminum pieces for a project. Be very careful as not to put to much side load. drill press not made for that) I have also used it to mill plastic. Makes lining up pieces for drilling precision holes excellent. Best one out there? No. But the best one for this price point. Bottom Line Yes. I would recommend this to a friend 7/20/2013 5.0 Fast delivery to my door! By CalGunOwner from Southern California Comments about Central-Forge 5" Rugged Cast Iron Drill Press Milling Vise: Overall not a bad little piece of equipment for those little jobs that come up at home. But use on a bench top drill press may pose a problem. You will have to attach the mill on the diagonal to the table so only two holes will be of use. And you'll find that the drill will have to be swiveled around to make using the X/ Y axis easier. Otherwise column assembly on drill press for drill head will stop back travel. You can get it to work. Bottom Line Yes. I would recommend this to a friend 5/17/2013 4.0 By MorRobotics from VA Comments about Central-Forge 5" Rugged Cast Iron Drill Press
$
549.98
Buy It Now
Free Shipping
Condition: New
Location: Fontana,CA,USA
$
4,939
Buy It Now
$189 Shipping
Condition: New
Location: Wayland,MI,USA
$
259.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
1,609
Buy It Now
$0 Shipping
Condition: New
Location: New Berlin,WI,USA
$
75
Buy It Now
$0 Shipping
Condition: Used
Location: Farmingdale,NJ,USA
DELTA ROCKWELL 11" 14"15" DRILL PRESS DRIVE PULLEY SPINDLE SLEEVE DRIVER DP-264. THIS DRIVER IS USED. BUT SHOWS NO WEAR IN KEYS. I HAD ... moreTHIS ON MY SHELF AS A BACKUP, BUT SOLD THE DRILL PRESS. IF YOU OLDER 11" 14" OR 15" UTILITY DRILL PRESS SPINDLE RATTLES, THIS IS THE DRIVE KEY THAT YOU SPINDLE DRIVES IN AS IT IS MOUNTED IN THE SPINDLE PULLEY. JUST REMOVE THE 3-SCREWS AND INSTALL THIS. ADD GREASE TO GEAR PRIOR TO INSTALLING TO ACT AS A CUSHION. WILL ONLY WORK WITH SPINDLES THAT HAVE 2 GROOVES 180 DEGREES APART. EMAIL ANY QUESTIONS PRIOR TO PURCHASE!
$
218.29
Buy It Now
Free Shipping
Condition: New
Location: Duncan,SC,USA
$
369.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
1,479.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
541.63
Buy It Now
Free Shipping
Condition: Used
Location: Middlebury,IN,USA
$
19
Buy It Now
$4.68 Shipping
Condition: New – Open box
Location: Long Beach,CA,USA
$
125
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown,VA,USA
$
35
Buy It Now
$8.5 Shipping
Condition: Used
Location: Fair Haven,NJ,USA
POWERMATIC DRILL PRESS PART#1150 MODEL ALL THESE PARTS ARE OFF A WORKING MACHINE THAT WAS PARTED OUT. CHECK OUT MY STORE FOR LOTS MORE STUFF LIKE THIS. ... more732-642-8271 1150 HOOD/BELT COVER
$
525
Buy It Now
$150 Shipping
Condition: New
Location: China
Pay attention: About voltage and plug.We ship according to your country standard. If you have special needs.Please leave us an ebay message before payment. ... moreDrill bit is not included! Specifications: 1.Small size and easy carrying 2.Electronic overload protection 3.Strong drilling capacity and high efficiency 4. Suitable for core drills. 5. CE/ROHS/ISO90001:2008 certified Parameter: Product model KCY-28DM KCY-38DM KCY- 55DM Max. core drill dia Φ28 Φ38 Φ55 Rated voltage 110/220, 110/220 110/220 Rated frequency 50~60, 50~60 50~60 Rated input power 1400, 1650, 1900 No-load speed 650, 600, 550, Contact us: We are the professional drilling machine manufacturer in China. We offer discounts for quantity order. Please contact us before making purchase. If you have any questions regarding this product. Please don’t hesitate to send us an ebay message or contact us by the following: Tel:+86 21 66550688-810 Skype:cayken4 QQ: 2880158128 E-mail:sale013@cayken.com.cn Shipping policy: Items are typically shipped within 5 business days of receiving cleared payment. DHL is our primary parcel carrier. We also ship item by Fedex.UPS,TNT and EMS. We will choose the reasonable shipping method to save shipping fee for every customer. Return policy: We will accept return in 14 days only if the item is defected or unused. You must contact us before any return. For item that is defected. You must provide us photos of the item first and return the item to us for replacement or refund. For item that is returned as"new/unused" We will charge 30% of re-stocking fee plus shipping and handling costs. If the items are free shipping. We will deduct our shipping cost from the original selling price when we process refund to you.
$
768.88
Buy It Now
$120 Shipping
Condition: New
Location: Fontana,CA,USA
$
19.99
Buy It Now
$7.4 Shipping
Condition: Used
Location: Long Branch,NJ,USA
$
175
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
109.98
Buy It Now
$0 Shipping
Condition: Manufacturer refurbished
Location: Big Rapids,MI,USA
$
90.14
Buy It Now
Free Shipping
Condition: New
Location: Duncan,SC,USA
$
11.95
Buy It Now
Free Shipping
Condition: Used
Location: Hopedale,OH,USA
$
1,274
Buy It Now
$0 Shipping
Condition: New
Location: New Berlin,WI,USA
Add our Store to your Favorites and receive our email newsletters about new items and special promotions! General Interest, North America Phase Converters& ... moreElectrical Supply is pleased to offer our PL-15 Pro-Line 15HP Rotary Phase Converter on eBay. We believe you won't find a more complete rotary phase converter on eBay that is this loaded with features and matches our quality at a better price. North America Phase Converters understands you have a lot of choices when it comes to purchasing a rotary phase converter, Thank you for your consideration! Please visit our eBay Store for more sizes and other great products! Control Panel Features. Built-In Motor Starter with Start/Stop Switch Digitally Protected& Controlled Start Circuit Complete Phase Power Failure Protection, Precision CNC Voltage Balancing, Power"ON" Indicator Light, Easy Installation, Distribution Block Connections, Power Factor Corrected, Made In the USA Lifetime Warranty Generator Features. Custom made Phase Converter Generators Low Impedance/High Efficiency Design, Made by Baldor USA Custom Copper Windings and Rotor, Corrosion Resistant Paint, Quiet Operation, Vacuum Pressure Impregnation for all Windings, Shielded Windings, Available Upgrades. NEMA 3R Enclosures, 480 Volt Control Panels, Plugs and Outlets, Automatic Controls, Model, Brand, NAPCES, Line, Pro-Line, Model# PL-15, General Specifications, Horse Power(HP) 15, Kilo-watt(kW) 11.2, Frequency(Hz) 60, Generator Type, ODP Enclosure Type, NEMA 1(Indoor) Generator Frame, 254, Single Phase Electrical Specifications, Voltage Input, 208- 250, Minimum Fuse Size, 30, Minimum Circuit Breaker Size, 30, Maximum Fuse Size, 80, Maximum Circuit Breaker Size, 80, Minimum Wire Input, 4 AWG, Idle Amperage, 2.11, Three Phase Electrical Specifications, Voltage Output, 208- 250. Based on input, Output Amperage, 42, Voltage Balance, 2- 5% Minimum Wire to Generator, 8 AWG, Minimum Wire to Load, 8 AWG or based on load, Dimensions& Weights, Enclosure(H X W X D) 18" X 18" X 8&q
$
125.99
Buy It Now
$0 Shipping
Condition: New
Location: Norcross,GA,USA
$
125
Buy It Now
Free Shipping
Condition: Used
Location: Gleason,TN,USA
$
64.99
Buy It Now
$0 Shipping
Condition: Used
Location: Gurnee,IL,USA
DREMEL MultiPro Deluxe Drill Press Stand Model 212 Type II. Please ask any questions you may have. Thank you for watching and happy bidding.
$
27.5
Buy It Now
$6.5 Shipping
Condition: Used
Location: Bountiful,UT,USA
$
729.88
Buy It Now
Free Shipping
Condition: New
Location: Fontana,CA,USA
$
195
Buy It Now
$0 Shipping
Condition: New
Location: Norcross,GA,USA
$
399.28
Buy It Now
$4.99 Shipping
Condition: New
Location: Minooka,IL,USA
Westward 10D734 Drill Press Vise. Cross Slide, Stnry, 8 In Condition: Used. Great condition, No damage, Comes As is, with who is pictured ALL MESSAGES ... moreWILL BE ANSWERED ORDERS WILL SHIP MONDAY- FRIDAY NO INTERNATIONAL SHIPPING. SEE EXCLUSIONS. PLEASE PAY WITHIN 72 HOURS OF PURCHASE TO AVOID AN UNPAID CASE 8-27-14 item location: LI I-181(C9) 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1481a348ff1-0x101-
$
7,955
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
30
Buy It Now
$7.9 Shipping
Condition: Used
Location: West Dover,VT,USA
$
1,999
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
808
Buy It Now
$450 Shipping
Condition: New
Location: China
$
24.95
Buy It Now
$0 Shipping
Condition: New
Location: Louisburg,KS,USA
$
5,555
Buy It Now
Free Shipping
Condition: Used
Location: Toledo,OH,USA
$
65
6d 10h 28m 0s
0 bids
$12.5 Shipping
Condition: Used
Location: Clifton,NJ,USA
$
17,500
Buy It Now
Free Shipping
Condition: Used
Location: Baltimore,MD,USA
$
24.99
Buy It Now
$8.95 Shipping
Condition: Used
Location: Birmingham,MI,USA
$
1,863
Buy It Now
$4.99 Shipping
Condition: New
Location: Minooka,IL,USA
$
12
Buy It Now
$7.5 Shipping
Condition: New – Open box
Location: Mundelein,IL,USA
$
535
Buy It Now
$0 Shipping
Condition: Used
Location: Grand Rapids,MI,USA
$
999.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
179
Buy It Now
$4.95 Shipping
Condition: New
Location: Islandia,NY,USA
$
8.95
Buy It Now
$0 Shipping
Condition: New
Location: Lakewood,NJ,USA
$
699.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
928
Buy It Now
$0 Shipping
Condition: New
Location: New Berlin,WI,USA
Add our Store to your Favorites and receive our email newsletters about new items and special promotions! General Interest, North America Phase Converters& ... moreElectrical Supply is pleased to offer our UL-10 UL-Listed 10HP Rotary Phase Converter for the US and Canada on eBay. We believe you won't find a more complete rotary phase converter on eBay that is this loaded with features and matches our quality at a better price. North America Phase Converters understands you have a lot of choices when it comes to purchasing a rotary phase converter, Thank you for your consideration! Please visit our eBay Store for more sizes and other great products! Control Panel Features. Built-In Motor Starter with Start/Stop Switch UL-Listed for the US and Canada Digitally Protected& Controlled Start Circuit Complete Phase Power Failure Protection, Precision CNC Voltage Balancing, Power"ON" Indicator Light, Easy Installation, Distribution Block Connections, Power Factor Corrected, Made In the USA Lifetime Warranty Generator Features. Custom made Phase Converter Generators Low Impedance/High Efficiency Design, Made by Baldor USA Custom Copper Windings and Rotor, Corrosion Resistant Paint, Quiet Operation, Vacuum Pressure Impregnation for all Windings, Shielded Windings, Available Upgrades. NEMA 3R Enclosures, 480 Volt Control Panels, Plugs and Outlets, Automatic Controls, Model, Brand, NAPCES, Line, Pro-Line, Model# UL-10, General Specifications, Horse Power(HP) 10, Kilo-watt(kW) 7.5, Frequency(Hz) 60, Generator Type, ODP, Enclosure Type, NEMA 1(Indoor) Generator Frame, 215, Single Phase Electrical Specifications, Voltage Input, 208- 250, Minimum Fuse Size, 20, Minimum Circuit Breaker Size, 20, Maximum Fuse Size, 50, Maximum Circuit Breaker Size, 50, Minimum Wire Input, 6 AWG, Idle Amperage, 1.54, Three Phase Electrical Specifications, Voltage Output, 208- 250. Based on input, Output Amperage, 28, Voltage Balance, 2-5% Minimum Wire to Generator, 10 AWG, Minimum Wire to Load, 10 AWG or based on load, Dimensions&
$
79
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
294
Buy It Now
$0 Shipping
Condition: New
Location: New Berlin,WI,USA
Add our Store to your Favorites and receive our email newsletters about new items and special promotions! General Interest, North America Phase Converters& ... moreElectrical Supply is pleased to offer our CP-10 Pro-Line 10HP Rotary Phase Converter Control Panel on eBay. Our control panels are to be used inconjunction with your electric motor to complete the rotary phase converter. We believe you won't find a more complete rotary phase converter on eBay that is this loaded with features and matches our quality at a better price. North America Phase Converters understands you have a lot of choices when it comes to purchasing a rotary phase converter, Thank you for your consideration! Please visit our eBay Store for more sizes and other great products! Control Panel Features. Built-In Motor Starter with Start/Stop Switch Digitally Protected& Controlled Start Circuit Complete Phase Power Failure Protection, Precision CNC Voltage Balancing, Power"ON" Indicator Light, Easy Installation, Distribution Block Connections, Power Factor Corrected, Made In the USA Lifetime Warranty Generator Features. Your 10HP 3 phase electric motor as the idler motor Available Upgrades. UL Listings, NEMA 3R Enclosures, 480 Volt Control Panels, Plugs and Outlets, Automatic Controls, Model, Brand, NAPCES, Line, Pro-Line, Model# CP-10, General Specifications, Horse Powr(HP) 10, Kilo-watt(kW) 7.5, Frequency(Hz) 60, Generator Type, Your 10HP Electric Motor, Enclosure Type, NEMA 1(Indoor) Generator Frame, N/A, Single Phase Electrical Specifications, Voltage Input, 208- 250, Minimum Fuse Size, 20, Minimum Circuit Breaker Size, 20, Maximum Fuse Size, 50, Maximum Circuit Breaker Size, 50, Minimum Wire Input, 6 AWG, Idle Amerage, N/A, Three Phase Electrical Specifications, Voltage Output, 208- 250. Based on input, Output Amerage, 28, Voltage Balance, 2- 5% Minimum Wire to Generator, 10 AWG, Minimum Wire to Load, 10 AWG or based on load, Dimensions& Weights, Enclosure(H X W X D) 18" X 12" X 8" Idler(Approx. Length X D
 In 

Past Items  
 
Buffalo# 18 Volt 208-220/430 HP 1 PH 3# 3 Morse Taper Spindel Drill Press Buffalo Drill Press 4 Speed step pullies 4" X 4" vise included 2#3 Morse taper Jacobs chucks 0-1/2/key& 1/8-3/4/without key No bushings from#2 to#3 morse taper Foot off and on control switch The belt guard is not original Bit sizes included# 3 Morse taper 7/8. 1, 1 1/8# 2 Morse taper 21/32. 47/64, 3/4, 25/32 We accept Paypal and cashier's check for this item By bidding on this item you agree to complete the transaction within 14 days Item will be made available to the winning bidder after we receive funds. Bidder will be contacted via email soon after auction ends with payment instructions. You May Control Shipping Cost and Schedule Delivery The wining bidder/buyer can sellect their own freight carrier. Arrange and pay for shipping and handling charges. ... moreThe following basic rules apply. Must give us notification one business day before pick-up and pick-up be arranged during our platform business hours(8:00 am to 4:15 pm) FOB is the seller's dock(Buyer takes responsibility for item once it leaves seller's dock. Within seven business days after the item has been made ready for pick-up. The buyer must pay a carrier and make arrangements to take item off current premises. Many freight companies require items be crated for shipment. Please see" You Can Have Your Item Crated for Shipment" heading below. You May Get Help Most shipping and freight companies are happy to assist you with an estimate and are ready to step you through the process. Quotes are available from the following websites: freightquote.com. Uship.com, yellowfreight.com, gitrucking.com(You may choose another company) A freight calculator is provided below for estimates only You Can Have Your Item Crated for Shipment Many freight companies require that items be crated for safe shipment. Packing. Wood crating and palletizing costs are determined according to the size of the item. The cost typically range from $19.00 to $69.00. Larger, fragile item
Antique drill press model 503 from The Silver Manufacturing company. Salem,O,USA
This safety planer is used for wood and plastic. It Has been re-sharpned by the seller. Replacement knives are available at freeman manufacturing listed as rotary surfacer.
We have an antique Champion Blower& Forge post drill. Aka- a blacksmith's drill press. It was manufactured in Lancaster, PA and is still in good shape. The post drill also comes with a Whitney Imperial Punch, which has some damage where the dies mount, but could be reparied or used for parts. We prefer local pick-up but are willing to ship within the continental USA. Please inquire if you are interested in local pick-up. We are located in the Waterbury area in Connecticut.
Product Specifications. Brand: DUMORE, Condition: Used, Model: 16-021, Type: Drill, Supply Voltage: 120 V-AC, Amperage: 1.0 A AMP, Shipping Weight: 19 lbs, Shipping Dimensions: 8 x 5 x 16 in, SKU: B338102(EAV) Category: Tools· Electric Tools, Additional Notes: HIGH SPEED SENSITIVE PRESS, Product Photos. $500 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is ... more3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. NRI is
Buffalo 15 double head drill press with heavy duty mounting table and storage cabinet.
UP ON THE AUCTION BLOCK HERE IS A USED VINTAGE DELTA MILWAUKEE 17" DRILL PRESS BELT GUARD BOTTOM PLATE SET. SOLID SHAPE. JUST NEEDS SAND BLASTING AND NEW PAINT. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
Irwin Drill Press Expansive Bit No. 1R
LOCAL PICK-UP& LOCAL SHIPPING ONLY(ORANGE COUNTY. LOS ANGELES COUNTY) Clausing 15" Drill Press Model: SC16 Year: 1940's Condition: Good Rating: 3) Used/Tested Replacement Cost: Not Available Technical Specifications: 115/230V. 60Cy, 1PH Capacity: 15" Rockwell Motor: 1/2 HP. 1725 RPM 5-Speed Pulley: 260. 530, 1060, 1860, 3600 RPMS All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test ... moreor cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer is responsible for all shipping. Crate, freight charges, and any applicable taxes. Items will be shipped within 10 business days from the date payment is received/cleared. A tracking number will be provided upon shipment of your item. Please ensure we have the c
Milwaukee Electromagnetic Drill Press Mount Model: 4202 120 Volt. 60Hz, 12.5 Amp Condition: Used Surplus- Untested As-Is Feel Free To Message Us With Any Questions! Our Reference# D1300168-25 Thanks For Looking! WWW. BMGSURPLUS Auction Information Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally biding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction or if payment is not received within 5 days, item may be offered to the next highest bidder or relisted at the sellers sole discretion. Shipping Details: All shipping originates from 29059 zip code. Shipment will be either UPS. FedX or USPS. Some larger items will ship via Common Carrier ... moreOnly. Orders are generally shipped on the day after full payment. Payment Details: Paypal is Preferred Method of Payment Returns: Most items we sell are used. Sold AS IS unless otherwise noted in auction. No Warranty or Returns.
SHOPCRAFT FLOOR model DRILL PRESS gently used HOME work SHOP PRICED 4 QUICK SALE PLEASE ADD US TO YOUR FAVORITE SELLERS AND VISIT OUR STORE TO SEE OUR GREAT BUY IT NOW DEALS FOR MORE UNIQUE ESTATE FINDS LISTING DAILY! DESCRIPTION: THIS IS PICK UP ONLY IN THE PHILADELPHIA AREA LARGE SIZE FLOOR MODEL DRILL PRESS BY SHOPCRAFT. Model T7001-20P. In gently used good working condition. This came out of our 90 yr old pop pop's house. Please see pictures for description. PRICED TO SELL QUICKLY, this will only be available for the next 5 days, so call to see if you are interested. Larger items may be slightly disassembled(with instructions for simple reassembling) in order to safely ship AND may ship Greyhound Package Express or UPS. At the discretion of our packer/ shipper. SHIPPING QUOTE IS FOR THE LOWER 48. ALL OTHERS, PLEASE CONTACT BEFORE ... moreYOU BID. ALASKA/ HAWAII/ PUERTO RICO- MAY BE THE SAME FOR SMALL PACKAGES. ALL OUR SHIPPING IS CONTRACTED OUT FOR QUICK SHIPPING AS WE ONLY WANT TO EXCHANGE 5 STAR RATINGS WITH HAPPY CUSTOMERS! PLEASE READ: As always. We put in plenty of pictures, and you are bidding on what you see. So if you have any questions or need different pictures, please email us before you bid, we are more than happy to oblige. Please remember that antique and vintage items have been around for a long while and will have normal wear. Dings, slight cracks and chips. We do our best to describe as accurately as possible.
This is a vintage"Clark Controller Co. foot pedal power switch in good condition. I got this some time ago. With a drill press I purchased. You push down on the top button, to turn on and button springs up, when you let go, to turn off. The box is cast aluminum and approximately 4" X 4" This would work for a drill press or any other power tool where you need to be hands free. Free Expedited shipping to U.S. Thanks for looking.
WILTON VSG TWENTY DRILL PRESS Model number: 2140/ serial number: 30106 MOTOR 3 phase/ 3 hp Drill press 11909 This drill press is able to be used for metal& wood working. The maximum spindle R.P.M 1.200 The height of the table can be adjusted manually The motor that runs this machine is a BALDOR INDUSTRIAL PRICED TO MOVE BUY WITH CONFIDENCE 100% FEEDBACK Buyers should verify all information! Equipment is being sold as is where is and is subject to availability. ARM RESERVES THE R IGHT TO SELL THESE ITEMS OU TSIDE OF EBAY! Feel Free to call us anytime 1-951-361-9187 562-295-7669(Espanol) Just ask for anyone in sales.
5/8" Delta Drill Chuck for Drill Press-1/32- 5/8" Delta 5/8" Drill Chuck for Drill Press. This comes with a new hard to find Delta key for the chuck. Comes with#2 MT arbor. Has normal wear and tear. This is used but is very smooth operating. This auction only includes the items and accessories pictured and described above. Photos shown are taken just before listing. Using the actual item and all components offered in this auction. The photos in the ad are the actual item you are bidding on. If you have any questions.Please ask before bidding. Please look at the pictures. I am going to charge a flat fee of $5.00 for shipping and insurance. I will ship as soon as payment is received If you live in my area.You can pick it up and save on shipping. If you have questions. Please email before bidding, thanks. I will pack the unit ... moreand ship it for a modest fixed fee of $5.00. I accept PayPal.
1) CINCINNATI BICKFORD 15-HP Vertical Variable Speed Drill Press- Used- AM9980 Specifications: Main Drive Motor: 5 HP Spindle Speeds: 60– 1000 rpm- Variable Maximum Distance From Face of Column to Center of Spindle: 11.5” Table Dimensions: 28”W X 18” D Includes: Integrated 5 HP Main Drive Motor Drill Chuck& Assorted Drills Bits Mounted Work light 220/440 Volt. 3 Phase Electrics This machine is on our floor available immediately. Subject to prior sale DISCOUNTED SYSTEM PRICE | A S PICTURED | LOADED ON TRUCK | FOB CLEVELAND. OHIO Do not hesitate to call with any further questions and we look forward to doing business with you. A M INDUSTRIAL- EBAY DEPARTMENT- 216-433-7171– www.amindustrialmachinery.com…Dust Extraction…Fabricating Machinery…Sawing& Cutoff…Tube& Pipe… New Arrivals Daily! Conditions: Used items sold hereunder are neither ... moredesigned nor manufactured by the seller, and this sale of these items is on an as-is and without any representations or warranties. Expressed or implied, of any kind including safety, condition, or quality. Seller further assumes no responsibility to provide safety devices or equipment necessary for the protection of the user or to comply with applicable governmental laws or requirements. It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale. All sales are F.O.B. Cleveland. Ohio unless otherwise specified.
Giddings and Lewis Radial Drill Model 954
DUMORE CAT. 2-100 SPEED CONTROL BOX 115 VOLT 7 AMP FOR DRILL/LATHE/PRESS DESIGNED FOR DUMORE MOTORS CATALOG NOS. 1.2,3,6,8,9,10,29-081,35& 40 DESIGNED 115 VOLTS A/C 60 CYCLES 1 PHASE 7 AMPS. MODEL: 2-100 SN: 1524 3 PRONG OUTPUT AND LONG POWER CORD. BUILT IN BREAKER/SWITCH AND MODES FOR SPEED/POWER AND HI LOW SOLD ASIS. UNITED STATES SHIPPING CHOICES AT THE QUOTED RATE ABOVE. MULTIPLE PURCHASES FROM MY AUCTIONS WILL COMBINE SHIPPING DISCOUNTS. INTERNATIONAL RATES MAY BE HIGHER. ASK FOR A QUOTE. ASIS. ALL SALES FINAL. Powered by The free listing tool. List your items fast and easy and manage your active items.
This drill is in poor condition. You can see in the pictures that there are several nicks. Scrapes, marks and dings on the surface from previous use wear. There is grime in the crevasses that I could not get out. There is a tear in the cord that I have photographed. This item was tested and appears to work just fine. The drill shown in the pictures is the actual item for sale. 1440328-1.
Auction Wizard 2000 Listing Template- AW2KLOT#10811 Challenge Paper Drill EH-3A Hydraulic Press 60 Day Warranty This paper drill press with used non-warrantied drill bits has been tested and is working perfectly. If you have any questions please don't hesitate to let us know. The following information comes from a 3rd party website. The Challenge EH-3A three-hole drill makes it easy to prepare presentations. Manuals or reports for use in three-ring binders. This machine makes it possible to drill clean, consistent holes varying from 1/8" to over 1/2" in diameter in virtually any position on a page. The Challenge drill can also handle a variety of stock sizes and thicknesses, including as many as 250 sheets at a time Hydraulic Operation 2" Drilling Capacity Fast and Easy Head Adjustments Flexible Backguage Adjustments Automatic ... moreDrill Return Model: EH-3A Serial Number: 67523 Number of Drill Heads: 3 Size of Drill in Machine: 1/8" Range Between Drills: 2 3/4" to 4 1/2" Range Between Outside Drills: 5 1/2" to 9" Maximum Drilling Capacity: 2 1/2" Strokes Per Minute(adjustable) Up to 18 Backgauge Adjustment: 0 to 4 1/2" Vertical Adjustment of Individual Heads: 1/4" Dimensions: Table Size: 19 1/2" x 31 1/2" Table Height: 37" Overall Height: 59 1/4" Floor Space Needed: 36" x 41 1/2" Net Weight(approximate) 520 lbs. Spindle Motor: 208-230V 18 amps 60 Hz AC Single Phase This item comes only with what is pictured. Contact us through eBay. Or call 304-489-2226 with questions. If there is anything that would prevent your leaving 5-star feedback, please call or e-mail within 60 calendar days after receipt of your item. WE WILL MAKE IT RIGHT! LOCAL PICKUPS WELCOME! This item comes only with what is pictured. And is a LARGE PALLETIZED ITEM that must be handled with a forklift or pallet jack. This item cannot be shipped in a cardboard box. PRIOR TO PLACING A BID. Please obtain a shipping quote from your freight carrier. For more information.
ORIGINAL JACOBS DRILL CHUCK NO# 6A CAP. 0-1/2 5/8" SHANK MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Portomag 115V Magnetic Drill Press Model B2 In good working order.does not come with chuck key.
This drill press was to be modified with the motor that you see attached to the drill press in these photos. This motor is a single phase Balder electric co. motor and run very good.spes on are as follows; frame;56z ser f990. Hp; 3.5 AW Duty TE, volts; 115/208-230, amps; 38/21-19, rpm; 3450, HZ;60 Rating = amb- cont.at this time the owner does not want to finished hook-up but wants to retire after 30 plus years.there is the original 3 phase motor that goes with this drill press also. See special shipping instructions.shipping must go freight truck weight determined at time of sale.
LOT OF 13 PCS HSS CENTER DRILLS SOME NEW& SOME LIGHTLY USED. ALL USA MADE& STILL SHARP, 10 ARE KEO, ALL HIGH QUALITY USA TOOL BITS. PLEASE CHECK MY OTHER ADS FOR MORE TOOLING. SALES& SHIPPING TO USA ONLY. PAYMENT DO IN FIRST 24 HRS. OF SALES END& I WILL SHIP BY NEXT DAY. THANKS. USE SHOPPING CART FOR MORE THAN ONE ORDER FOR COMBINED SHIPPING. THANKS.
Vintage 2-1/2" PALMGREN NO.1 MACHINIST VISE Chicago Tool Co. USA Drill Press. OPENS TO 3" TOTAL LENGTH 6" VERY GOOD CONDITION. NO PREVIOUS OWNER MARKS.
in titles& description Name: Electro Mechano 8" Precision Drill Press Ticket# 24008, Model: 601J, Capacity: 1/16-1/2" Size: 8" Manufacturer: Electro Mechano, Item located at: Morrisville. PA, Serial# 67118, Condition: Used, Terms& Condition: As is where is, Description: Electro Mechano Drill Press Model: 601J SN: 67118 220-440 V. 3 Ph, 500W 150-4000 RPM 8" Throat Table area dims: 21 in. x 16 in. Work table included in sale | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Palmgren 320 3-Inch Drill press vise with lugs. Item is used but clean and in excellent condition. Jaw width: 3-Inch•Jaw opening: 3-Inch•Throat depth: 1-1/2-Inch•Vise height: 2-5/8-Inch•Lead screw type: V-Thread. This general purpose vise is recommend for use on drill presses. Milling machines, grinders, and other machine tools. They have fine thread adjusting screws and ground steel jaws. The fixed jaw is grooved horizontally and vertically for convenience in holding round pieces. Made form 30,000 PSI tensile strength, fine grain cast iron. Base and bed are parallel to 0.001-Inch. Center of base is open for holding work through body of vise. They feature bolt lugs for mounting on a machine table. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14454e6bbc4-0x10c-
Vintage Millers Falls No. 217 DRILL PRESS VISE Tilting Jaw Machinist Table Vise Description: Welcome to*~Blackster13~* Auctions My Prices Are CHEAPER because I want YOUR business! NEVER A RESERVE! NO HANDLING FEE! ACTUAL WEIGHT SHIPPING RATES APPLY! ALL AUCTIONS START AT $8.99! Winners acknowledge that they have read all listing details before bidding* For your consideration is a Vintage Millers Falls No. 217 DRILL PRESS VISE-Tilting Jaw Machinist Table Vise. Item is in good. Smooth working order with cosmetic flaws from age and use. Buy from a trusted seller! P le ase click on to Supers ize and examine any and all pictures for item identification. Condition and capabilities. Potential buyers understand that unless otherwise specified this is a used item, and as such it will not be like a new product and will likely have cosmetic flaws. Buyers ... moreagree to view all pictures to ascertain any and all cosmetic flaws and bid accordingly. I will not accept a return for a cosmetic flaw not affecting the functionality of an item. Electronics buyers please note: Every electronic item sold has a safeguard in place to determine whether the unit has been opened or not(including pictures of internal components) If a buyer returns an item and it is found to have been opened. It will be assumed it has been tampered with and no refund will be given. This process is required to combat unscrupulous customers switching internal components of a unit. Also, many times radio chassis have screws missing. ALL of my merchandise is from a SMOKE FREE home. Any questions. Just ask! ALSO NOTE: If it's not mentioned in the listing details or seen in the pictures it's NOT INCLUDED. All articles have shipping insurance included in the shipping cost(US only) I strive to provide the very best in customer service. And I will do whatever I can to make our ebay transaction POSITIVE! Please leave 5 stars for ALL captions when leaving Feedback! NOTE: Unless stated as"new" in the listing. This is a used item. Bid with confidence
OFFERED: LOT OF 2. 4" LONG AND PALMGREN NO 30 6 1/4" LONG- OLDER TYPE. SHIPPING AT $11.00 ANYTOWN USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Up for auction is this owners manual for a Sears Craftsman Motorized 15-Inch Floor Model Drill Press. Model No. 113.213151 Drill Press with Maximum Developed 1 HP Motor Includes Motor Specifications& Electrical Requirements. Assembly, Operation, Adjustments, Maintenance, Lubrication, Recommended Accessories, Trouble Shooting, Parts List. 36 pages. Including front and back Condition: stain on cover and slight discoloration Shipping is FREE on this item. Please email me if you have a question. Thank you for visiting my auction. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14457453276-0x103-
OLD AS THE HILLS RUNS STRONG BUILT STURDY.
Up for your bidding consideration is this very nice 1959 Shopsmith Mark 5 multi wood shop tool and accessories(serial#355970) This tool is in overall very good to excellent original condition and shows little signs of usage. This tool starts and works as it should and the variable speed feature works wonderfully. It comes with the table saw. Drill press, lathe and disk sander options and is ready for any other compatable Shopsmith accessory. None of the castings are chipped, cracked, broken, split or previously repaired, to the best of my knowlege. It will need a complete cleaning and service before it should be out into service. The casters/wheels all operate as they should, with no cracked, broken, seized or flattened wheels. The paint is 100% original and shows little if any paint loss. The only thing I see that may need some added attention ... moreis the light surface rust on the bare metal round main rails. Its not bad, but with a bit of buffing and a touch of lube, I'm certain it will be great. What you see in the provided pictures is exactly what you are bidding on. If you are looking for something and you don't see it, it's not included in the auction. The provided pictures should speak for themselves. But if you have any questions, please feel free to ask. Please look closely at all of the pictures and ask any questions"before you bid" Please note: This is my livelihood. My income, my way of life, so please if you bid on one of my items and win it, I ask you to please pay for it and in a timely manor(within a day or so) Lately, I have been stiffed on quite a few larger dollar items that people bid on numerous times and never pay for them. This sets me back acouple weeks financially, so a speedy payment is greatly appreciated. I try my best to provide quality items and service to ALL of my customers here and abroad and take great pride in my workmanship, so I would appreciate payment for all items that are won in any of my auctions so that I can continue providing quality items to the eBay
Rare splayed leg heavy duty stand for Delta Rockwell drill presses or the 12" disc sander and other machines. Has original bugle bolts and solid lower steel shelf. It's in very good overall condition and looks real good. But was spray painted with a light coating at some point. The bolt heads were also sprayed lightly, and could easily be cleaned before reassembling. Dimensions are 31-1/2" H and the top is 16-1/2" x 12-1/2" All 16 bugle bolts are there. This is a heavier stand and with cardboard wrap weighs about 40 lbs. Pictures are coming.
Sears drill press 33525926 Not sure of the age of it. In good working order
DESCRIPTION: USED. DRIFTS. THE SIZES ARE NO. 1,2,3,4. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL ... moreSHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE
This is a 1/3H.P. Drill press motor Central machinery 8" drill press# 44506. Motor and wired switch works well! Shaft is 1/2" thick and abt 2" long. 110 V. 60Hz. 1 Phase. RPM 1750 Class B.
SPINDLE QUILL FROM DELTA ROCKWELL 14" DP-220 DRILL PRESS. WILL ALSO FIT DELTA ROCKWELL HOMECRAFT 11" DRILL PRESSES. CAME OFF A FUNCTIONING DRILL PRESS AND IS IN EXCELLENT CONDITION. CAN BE USED TO REPLACE THE SLEEVE QUILL IN AN 11" HOMECRAFT DRILL PRESS WITH THIS BEARING QUILL.
This is a Drill press stand/base and post support Central Machinery 8"drill press# 44506. The post is 1 7/8" diameter and abt 15 1/2" in length. The base is 10 1/2" long. 6 3/4" wide, and 1 1/2" tall. The combined height is 17" tall. Great condition cleaned and rust removed ready to use!
This is a set of 5 step pulleys for a 8" central machinery drill press# 44506. Pulley 1: 3/4" shaft hole. Small side 2 1/4" large side 3 7/8" Pulley 2: 1/2" shaft hole. Small side 1 1/2" large side 3 1/2" Fits a 5/16" belt size K-26.
This is a Drill press table for a Central machinery 8" drill press(44506) Should work for any drill press with a 1 7/8" Tubular support bar. The table is abt. 6 1/2" X 6 1/2" X 3/4" thick. It is in great shape and ready to use!
This is an original advertisement from a publication dated November 1936. Of DELTA TOOLS for the Delta Manufacuring Co. Milwaukee, WI. Advertisement area is about 5 1/2" x 8" May have a few light smudges from printing on reverse side. And opposite page and few light handling creases, but still in very good condition. Every man interested in motor driven tools for home or factory should see the new 1937 Delta Catalog. Shipping will be by USPS First-Class mail. Please note: This auction is for a paper advertisement. And not for the physical item shown in ad.
This was used on a Craftsman floor mounted drill press and fits any standard 2.75" round stands. Simple to attach and easy to use. Correction* This fits a 2.75 inch round stand.
good used drill press
This vintage Craftsman drill press stand is in very good shape. Shows some soiling with age and use. But is complete and fully functional. Perfect for your workshop or garage. Item pictured is the one you will receive. Happy Bidding! Non US buyers MUST use Ebay int'l shipping program. Will NOT ship free overseas or out of the program.
10" DELTA Shopmaster Drill Press"Model DP200" Up for auction is a used 10" Delta Shopmaster table drill press. It works well and is in great condition. Selling due to closed business so grab a bargain. Local pick up only in Brooklyn. NY. Super buy and good luck. Thank you for looking and happy bidding!
I inherited this Smithy Midas 3- in-1 Lathe.Milling Machine. Drill Press from a gunsmith. I doubt that it has been used more than a dozen times. I have cleaned it up and lubed it and installed new belts.This model is still in production and you can compare it on the website. I am including with this machine.The rolling stand it is mounted on in the pictures and you will need one. The machine is very heavy being that it is entirely made of steel and cast iron.The manufacturer.Smithy.has provided 4 lifting handles and recommends that you have 4 men to lift it. If you are a big strong country boy and can tote 400 pounds or more by yourself.good for you! I am selling this machine as pickup only and I will consider reasonable offers.Once sold I will assist you with shipping your machine in any way that I can.But understand that it is your machine ... moreat that point.Thanks
Jewelers Drill Press There are no markings on the drill press. It comes with the pulleys and has an adjustable platform. All screws and knobs move freely. Comes with a mount that you can screw into a bench. Has a vintage Jacobs chuck that is marked CAP 0-5/32 In very good condition. Will be disassembled for shipping purposes. Please take into consideration prior to bidding, and study photos carefully! Please note that we are not experts and try to describe items the best we can. You are ultimately responsible for viewing photos and asking questions prior to bidding. We will combine shipping on multiple items, however we will NOT ship outside the U.S.
Vintage Champion drill press. Model 102-3. Excellent condition, works perfectly. No crack, no breaks, no repairs. All lubricated and ready to work! Bored for half-inch drills. As always with these drill presses, an adjustable chuck is recommended. One of the finest I've seen in my years of collecting and using drill presses. This is surplus from my blacksmith shop. Since this is of considerable weight(50 lbs) I'm offering it for local pickup or if you'd like to contact me, we can arrange shipping separately.
This is a vintage craftsman drill press stand model number: 335.25986. I bought this about a year ago. But I never used it because my drill couldn't fit on this drill press and I decided to buy another table top drill press. Only Ship USA.
Used Rockwell Delta 17-600 Drill Press 3/4 HP Brand: Rockwell Delta Model: 17-600 S/N: 1440972 Motor Brand: Reliance Model: P56G3020N-JY Type: P Frame: M56 Phase: 3 HP: 3/4 Frequency: 60Hz Speed: 1140 RPM Voltage: 230/460 Amp: 3.1/1.55A Working Surface: 17" x 12-1/2" Table Size: 20-1/2" x 16" Shipping Common Carrier on a Pallet: Shipping Dimensions: 48" x 40" x 76" H Shipping Weight: 400 Lbs We would be happy to supply you with a shipping quote. Please provide us a zip code and if your location is commercial or residential and if you have a fork lift or loading dock. Our Inventory# 11720 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. ... moreInc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please contact us for a shipping quote. Also please wait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1445c59b514-0x111-
Rotary Surface Safety Planer for drill press or radial arm saw A quality tool made by Leichtung Work Shops. Mount this tool to your drill press or RAM and use it to thickness plane. Smooth surface or add chamfer to your work piece. Includes allen wrench to remove/install cutters heads. Sharpening stone for the cutter heads, and bolt with standoff to mount the sharpening stone, and instructions. Like new condition. Used once to thickness plane an acoustic guitar bridge blank. Worked well but I have a drum sander that I now use for such tasks. Please ask questions before bidding. No refunds or returns on this item.
This was a tool designed for Pattern Makers which I am. I also used the Wagner and Kindt Collins Models which both used carbide cutters. This one uses three flat knife type HSS cutters. Of the three this model or type with the flat three knife design by far gave the better finish to wood. I did not use this unit on plastic, the HSS cutters would not have lasted long. I saved that for the planers with the harder carbide cutters. If your knifes are sharp and properly set, at 7000 rpm taking a skim cut of.010 to.015 moving the piece slowly gave you a very nice smooth surface on wood. It can remove material too. Depending on the wood hardness you can remove a 1/16 easily. As for the maker or mfg. I do not know. There are no marks of any kind to ID it. I do know that it was or is a thing you could buy from one of the Pattern suppliers like Freeman ... moreMfg. I'm pretty sure this came from Kindt Collins but they are no longer in business. It really doesn't matter. The knives have plenty of length left for sharpening. They are a very simple design so when the time comes for replacement you can have them made. Set the knives equally do not off set them or you will be cutting with one knife only. Setting knives is very simple. Load planer in drill press or mill, lower to flat surface 90 degrees to planer axis with a 1/16 to 3/32 gap to table. Lock everything down. Lower knife to surface and lock down with flat blade screw driver. This is done on purpose because an allen wrench type fastener you could over tighten and strip threads. This is a very nice tool both functional and has a nice look to it. Very unique and hard to find. It may be impossible to find. I did a search checking likely places also checking forums and I could not fine any nor any information about them. But having used it for over ten years there is no other tool that can do for you what this one can. Condition: I used this tool hundreds of times. Sharpened the knives 10 or 15 times. With all that use 10 minutes with the wire wheel and it looks as good
Up for auction is a Hamilton Precision Micro Jewelers Watch Clock Drill Press + Bits. This item is in used condition as seen. All the bearings are good and it runs very smooth. It does not have a motor on it. It will need one before use. It does come with the pulley to put on the shaft of your new motor. See pics for size. It comes with a bunch of bits of varous sizes as seen. Don't miss out on this great price for a nice precision drill. Bid now! PLEASE SCROLL DOWN TO VIEW ALL PICTURES. OUR PICTURES ARE PART OF OUR DESCRIPTION. IF IT'S NOT IN THE PICTURES IT WILL NOT BE INCLUDED. HAPPY BIDDING AND FEEL FREE TO ASK QUESTIONS! Please check our other auctions + store for more great items. We don't charge handling fees. Shipping quotes are actual charges. Items are ESTATE FINDS IN USED CONDITION and MAY have wear. We are not experts ... morein any field- ALL ITEMS SOLD AS-IS. AS FOUND- Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1445df773c4-0x11a-
JET420F3P drill press. Adjust belts for differing drill press speeds. 1/2-inch chuck. Adjustable table height. Table adjustment handle needs replaced.
Dumore automatic drill press with model 20-011 automatic drilling head. 115 volts single phase. Adjustable cycle on and cycle off delay. Currently set up for air cooling/ chip particle removal at the bit very near to the drilling surface. The set up can easily be change to allow for fluid cooling/ clearing with the addition of a small pump running off the existing solinoid that controls the air the the bit. Solid cast table with two coolant drain. Good running condition. Will palletize for free. Commerical loading dock and forklift onsite. Email for a shipping quote. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-144602a47c9-0x10d-
I have for you a 20" variable speed drill press made by Clausing in great condition. In the U.S. Clausing drill presses are considered the best. I took this machine out of service and have oiled up all bare surfaces for protection. This machine is 1 1/2 HP. Three phase, 220 volts. It has an adjustable production table with a few inconsequential drill marks. This machine has a chuck which attaches to the spindle with a#3 Morse taper. The chuck has a key that is attached to the machine with a chain. The spindle speeds are in two ranges from 150 to 1000 rpm and 300 to 2000. This machine has a light on a flexible extension which was professionally attached. It appears to me that this machine has seen little use, it was in a large shop with many CNC machines so it was not a a primary use machine. I can ship the item to you at your setup and ... moreexpense or local pickup is always welcome. This machine weighs about 1200 lbs. The strap you see on the head is not a part of the drill press it is what I used to lift the machine. Payment is due within three days from end of auction. I accept Paypal. I will work with you if you want to ship this press but the buyer will have to make all arrangements. No international bidders please. This auction is only for the drill press. Any other items displayed are not INCLUDED in the auction. Just a word about myself. I am an avid cook, mechanical engineer, woodworker and lover of copper pots though I use a lot of cast iron and pottery in my cooking too. I am also working on becoming more versed in blacksmithing. I love great craftsmanship and clever devices especially those that will make my life easier. Since my family is from Europe I am partial towards quality products. I look forward to bringing my findings to you. If you have any questions I will do my best to answer them.
Mill/ Drill press hold down clamping set. In good condition. A few small pieces might be missing. Check photos. This will be shipped in a flat rate USPS box. Because of the weight. We might have to remove all the pieces,put them in a seperate bag. We cannot wrap each piece seperately, they may get scratched, however their pretty rugged. We took a few pieces out and photographed them seperately. We only ship to the USA:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-144603dba88-0x10c-
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144608b0c33-0x106-
sharp used 3 morse taper shank drill HSS China 7/8" x 10 3/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
sharp used 3 morse taper shank drill Guhring USA 31/32" or.9688" x 12 3/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
sharp used 3 morse taper shank drill Cle-Line USA 1 3/64" x 11 1/2" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
sharp used 3 morse taper shank drill marked HSS china 1 1/8" x 11 1/4" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
sharp used 3 morse taper shank drill F.B. Tools Speedi Cut England 1 1/4" x 11 1/2" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
6" Cardinal 6B Speedvise machinists milling drill press bench vise quick vise opens to 5-1/4"
Up for auction is a heavy duty cast aluminum/zmac 3" drill press vise model number 103 9A on the main body casting. Based on the model number I believe this is a Sears Dunlap brand vise made by King-Sealy for Sears. I have another vise like this listed and it is labeled with a Sears"Dunlap" decal which has worn off on this vise. The jaws are 2-1/4" wide and open up to 3" It is in good condition. A few dings, nicks and drill hits. It works good. The threads are good.
Vintage ROCKWELL Drill Press Model 15-091. I'm selling it AS-IS for parts. The front pulley is broken. The motor is in good working condition. Model 15091 1/2 HP 1725 RPM 1 Phase 115 Volt,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1446037e710-0x111-
THIS IS AN ORIGINAL ATLAS DRILL PRESS MORTISING ATTACHMENT THAT IS NEW BUT IS MISSING SOME PARTS. YOU GET WHAT IS PICTURED AND I HAVE INCLUDED SEVERAL. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
Preowned MACHINIST VISE 5 1/2" for DRILL PRESS MILLING. You will receive the item you see here.
A very nice 1971 Delta Rockwell 32" radial drill press in very good condition. Model 11-280. The machine is all original including the motor. It was homeowner owned and has not been commercially used. There is one small hole in the table from a custom jig. But the table otherwise is great. Nice cast iron pulley guard, and motor has toggle switch. I will add some better pictures late tomorrow. I am willing to ship it via Fedex in 2 boxes. The buyer is responsible for shipping costs.
Sears Craftsman Bench top Drill Press Stand 9 25921 Clear to read adjustable depth gauge with fractional inch divisions. Handle is tight fitting. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14462297877-0x114-
Vintage Sears Craftsman Drill Press Stand Model 335. 25987 Bench top stand to convert a hand drill to a drill press. Feed lever handle works great Adjustable depth gauge with fractional inch divisions. Complete with"U" clamp to secure drill. Heavy duty cast base, Large Steel mast, Cast and steel mounting hardware. Measures 14" x 9" x 21" Tall Shipping weight approx 20-lbs, I will always list original photos of actual item you are receiving I will ship within the Continental US only I will ship within 24 hours of payment received Any questions please send me a message APPRECIATE YOUR BUSINESS THANK YOU
Classic drill press mortising attachment. All parts are working and nothing is sticking. The hardwood block is intact has only two drywall screw holes in the back. No chisels included. uses standard hollow mortising chisels. Was used on a 17" Delta drill press occasionally.
Old Drill Press by Silver Mfg with G E Motor Here is a drill press with an electric motor and switch. Made by The Silver Mfg. Co. Salem Ohio USA. Silver drill#668 with a General Electric Motor. This is very dusty and dirty we do not know the horse power. This one is made like the ones you would take off of a furnace blower. When you win this item let us know if you want the motor, it does work but if you do not want it, then it would save you some on the shipping. Or you can pickup this whole unit the way it is. Or we can disassemble it for shipping and not send the wood with(unless you want the wood) the calculator is figuring it with out the wood. There are a few parts on the drill press that have been broken and welded back together. But that was done before we received this item. It does run very smooth and works very well. If we had ... morethe room for it Wes would keep it for his self, but we already have 2 in our shop. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Paypal name has to match with eBay. Or contact us before buying the item for signature might be required. Non payment buyers will get item strike. We ship to Paypal Confirmed address through USPS& UPS so a physical address is needed& Ups will not correct your address if it is wrong they will return it to us& you will have to pay to have it re shipped. So confirm your address. Any damages must be reported within hrs. of delivery or it will not be covered. no refund will be given. Items being picked needs to be done in
Vintage drill press. Works. Bought at estates sale last year to do woodworking but never used. Lists Model and Factory Number on tag but stamping is very light. Best I can read is model 500253CA and factory 93(there maybe more letters or numbers there but I can't tell, like I said this is the best I can read the label) For pick up only in southern Illinois. Please ask any and all question. Is listed on other sites also.
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE PICK UP only! I will not ship this item PAYMENT to be made at the time of pick up. NO exceptions runs good Jacobs Chuck spins true good condition for its age S old AS IS. All sales final! Pick up must be made within 7 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
This drill press is in used condition. Although it is used it is still fully functional. We Only Ship to the U.S. No Foreign Nations. 8" drill press. 115v. 1/4 HP. 60 Hz. 1 PH. 1720 RPM.
The drill press and drill work very well. There are 3 places that have some rust: One of the screws on the drill press“U” clamp(that holds the drill in place) Part of the handle/lever and the round part the chock goes into(please see pictures) Other than that the drill and drill press are in very good condition. The unit measures 20½” high x 10” deep x 12” wide. I do not have any instruction booklets for either the drill press or the drill. The Sears Craftsman drill press is Model 9 25989 and has the number 5001-2 inscribed on the bottom. The Sears Craftsman ½” drill is Model 315.105020– Serial# A2137” It is double insulated. Reversible and 600 RPM. I only ship to the USA and countries eligible for eBay’s Global Shipping Program. If there is any damage to the items when you receive them. Please take pictures of the damage and do ... morenot discard the packaging ~ you may need to show both the items and the packaging to aid in making an insurance claim. Normal 0 false false false EN-US X-NONE X-NONE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144622978e3-0x118-
RYOBI 10 INCH DRILL PRESS DP101 120V 3AMP USED WORKING POWER TOOL Description: Ryobi model DP101 10" Drill Press. This unit is in used but good condition and working properly. We welcome local pick up at our store in Lakewood. CO. or use the shipping tab above to see service options and calculate costs. Shipping box: 1x1x1 Click to see larger photo: About Us: Walk In Auction is a consignment service to help others sell their items on eBay- including individuals. Businesses, and charities. We sell a variety of items and our inventory changes daily. We will always specify our opinion of the condition of an item and whether it was tested. We think we offer quality items at a great price and hope you agree! We try to give accurate descriptions and photos of the item so bidders can feel confident about their bid. Any item we sell is photographed ... morejust prior to listing and is always the item that you will receive if you are the high bidder. Selling used items is sometimes tricky and sometimes we make mistakes, we are only human. If we say the item is used, then please keep this in mind and bid accordingly. We think you will be happy if you decide to buy items from us but if you need to let us know of an issue then that is okay too! We will do our best to resolve problems that arise. Thanks for looking! Hope you will shop with us again soon! Legal: Walk In Auction is not the owner nor the seller of these goods. Rather a consignment service for the owner to assist in the sale of goods by keeping possession of the goods pending sale and final shipment to buyer. Walk In Auction makes representation and warrantee that the goods from the above listing match the description in the same listing. Returns are accepted under the circumstances that the item was significantly different than the auction description unless stated that items are sold as is. Walk In Auction specifically disclaims implied warranties of title, non-infringement, merchantability, or fitness for any particular use. The preceding disclaimer does not appl
Magnetic Base Drill Press Metal Muncher USED WORKS GREAT. CONDITION IS GOOD MODEL 1405 3/4 inch 120 Volts Buyer Pays Actual Shipping Cost No More Prices will depend on Your Location From Florida Shipping Should be less than Stated.
Vintage Craftsman"100" drill press head casting from model 103.23131. Casting is in great condition and ready to use. There are no breaks. Cracks or repairs. Really a very nicely preserved survivor. This casting fits on columns that are 2 3/4" in diameter. Questions will be answered promptly. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
WHAT A GREAT PIECE VINTAGE CANEDY- OTTO CAMELBACK BENCHTOP DRILLPRESS NO. 28 EVERYTHING WORKS IT'S STILL HEAVY BUT NOT LIKE A FLOOR MODEL MADE IN CHICAGO AND USED BY THE KEMP MACHINERY CO. IN BALTIMORE.MD. I HAVE CLEANED THIS WHOLE UNIT AND PAINTED IT WOULD MAKE A GREAT DISPLAY PIECE OR PUT HER BACK TO WORK. IT HAS PLENTY OF LIFE LEFT. UNIT IS LOCAL PICK UP LOCATED IN FAIRFIELD. PA. 17320
This is the spindle and retainer clips off of northern tool drill press. It is 7mm in length. The shaft is 2.25mm wide. The bearings are 4mm wide. Fits a#2 Morse Taper chuck.
UP FOR GRAPS HERE IS A USED VINTAGE ATLAS 15" MODEL 1020 DRILL PRESS 3 LEVER HUB PULL DOWN HANDLE. THIS FITS A SHAFT THAT IS 15/16" IN DIAMETER AND THE HOLE THE CROSS PIN FITS IN IS 7/16" AS PICTURED IT IS MISSING ONE BALL KNOB. SOLID SHAPE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
Heavy used machine crank hand wheel O.D. 4" Bore: 1/2" not keyed weight 1 LB 6 oz.
15” Delta Floor Type ProductionTable Drill Press 24” x 30” Table 5” Quill Travel 6 Speeds Approx 1 HP 115 Volt Single Phase Motor Older Drill That Runs Well Inspect Under Power in Our Branchburg NJ warehouse Questions Call dave@ 908-399-8133
Powermatic 1150A 4 Spindle Multi Drill Press Station General Info: Stock# MD-141942 Machine Name: Powermatic 1150A 4 Spindle Multi Drill Press Station Condition: Used. Good Tested: Yes. Good Working Condition Brand: Powermatic Model: 1150A Serial: 615S917. 615S918. 615S919. 615S920 Year: N/A Shipping Weight: 1500 Lbs. Shipping Dimensions: 84" L x 48" W x 72" H Location: Stone Mountain. GA Specifications: Powermatic 1150A 4 Spindle Multi Drill Press Station. 15" Swing. 3/4HP Motor, 115/208-230V(Wired 115) 3-Phase, 5 Spindle Speeds@ 400/840/1580/2800/5300, 65-1/4" x 20" Table Size, Cord& Plug Additional Info: All four Drills have been tested and are in good working condition. If you are looking to upgrade to this unit from one you are currently using visit our to get a price quote on what we will buy or trade ... moreit for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
This is an Atlas W68 universal table. Also known as an X-Y table. It is in good, used condition. The table surface is in good shape, with only one small divot from a drill bit and that is actually in one of the T-slots, not on the surface of the table. Please note that I will be removing the handles before shipping to avoid damage.
This is a used drill Chuck that looks to be in very good lightly used working condition. It doe shows some marks of light use wear. The capacity of this chuck is 5/64" to 1/2" or 2 to 13MM. Please see thee photos for further description. Paypal payments accepted. Payment due within 4 days of auction ending. Unless othwise requested! Ebays Unpaid item Assist will automatically open a case after 14 days. To avoid this. Pay or cancel your purchase before UPI closes the case. Ships out Fast. Usaully within 1 business day- I insure all Items over $100- We do combine shipping upon request. Must request before payment! If requested after payment only partial refund ddo to ebay charging on shipping fees! ALL SALES ARE FINAL. UNLESS THERE WAS A PROBLEM WITH THE WAY THE ITEM WAS LISTED OR DESCRIBED. 14 day money back return policy. If your ... morehappy with your purchase please leave a 5-star feedback or Contact us to Resolve any Issues. WE HAVE BEEN SELLING ON EBAY FOR MANY YEARS. THIS IS A NEW ACCOUNT FOR US! WE STRIVE TO DESCRIBE EVERYTHING AS ACCURATE AS POSSIBLE. MOST ITEMS ARE USED, UNLESS OTHER WISE STATED. IF THERE IS A PROBLEM PLEASE CONTACT US FIRST BEFORE LEAVING FEEDBACK! WE WOULD LOVE TO RESOLVE THE PROBLEM FIRST! THANK YOU! LONG TIME eBAY SELLER. WITH KNOWLEDGE OF CUSTOMER SACTISFACTION! STARTING A NEW VENTURE WITH A NEW ACCOUNT! DOING THE BEST WE CAN TO PROVIDE QUILITY USED TOOLS, AND ANYTHING ELSE WE CAN FIND, TO NEW OWNERS! The Best way to contact us is through eBay Messages with any questions or concerns.
This is the Atlas X/Y table for use on a drill press. handles will be removed for secure.Fast priority mail shipping in a large flat rate box(domestic) This is not some cheap import x/y table; this is a quality piece of equipment that will allow you to position your work on the drill press to the thousanths of an inch. Works with any drill press that has slots in the table. Such as Atlas, Craftsman, South Bend, Delta, Clausing, Rockwell, Walker Turner or others. It is used and in very good condition. The height to the top of the flat surface is 4-3/4" These were made from Atlas lathe parts. So many of the parts are interchangeable with Atlas lathes. The table top is 7" square and has four t-slots. The table top can be used as a boring table on a 12" or 10" Atlas/ Craftsman lathe. The lower feed travels more than 3" ... moreWhile the upper one travels 4-1/2" that is the travel if you keep the entire slide in contact with the base- you can get more travel if you overhang) The base is 6"x7-1/4" and has 4 long slots for 3/8" bolts or mounting to your drill press table. Both screws are in excellent condition. The handles are in good shape. The graduations on both dials and on the base are in good condition but slightly rusty need careful cleaning. PLENTY OF PICURES. THANKS FOR LOOKING.CALL ME ON ANY QUESTIONS OR EMAIL,KEN 541-538-8219.
YOSHIDA#YUD-555 21" DRILL PRESS EQUIPPED WITH: SERIAL: 400352- 20" ROUND TABLE- ADJ- 75-1800RPM- AUTO FEED- TAPPING- 4 MT- WGT: 1.995LBS PRICE: FOB BROOK PARK. OH- $ 2,950.00 SUBJECT TO PRIOR SALE BW 418 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT: De Maxwell or John at: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142
WILTON 25" DOUBLE GEAR HEAD BENCH-MOUNTED DRILL PRESS- WILTON 25" DOUBLE GEAR HEAD BENCH-MOUNTED DRILL PRESS INVENTORY# 6057 MODEL: 24200 S/N: 34644-34012 SPECIFICATIONS: SWING: 25" CAPACITY: CAST IRON: 1 1/4" STEEL: 1" SPINDLE TRAVEL: 6" SPINDLE TAPER: 3-MT SPINDLE SPEEDS: 8) 80. 120, 160, 240, 500, 730, 1000, 1460 DISTANCE BETWEEN SPINDLES: 10" 25" ADJUSTABLE) TABLE SIZE: 33 3/4" x 25 1/2" OVERALL DIMENSIONS: 35" x 30" x 72" EQUIPMENT INCLUDED: CAST IRON TABLE with COOLANT TROUGH MANUAL DOWN-FEED GOOD CONDITION FOB OUR BALTIMORE. MD WAREHOUSE VIEW MORE DRILL PRESSES HERE! CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, ... morewe will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca St- Baltimore. Maryland 21224 Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for return shipping. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multi
ebay template Central Machinery 8" Bench top Drill Press I TEM S OLD A S P ICTURED This little drill is in nice condition. See pictures. Comes with drill head with key. SPECIFICATIONS*Specifications based on catalog brochure and subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached ... moreto a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we have to bring in special equipment or call a mover. Note: Most of our listings are marked Freight shipping. We ship via FEDEX and USPS for item(s) 150lbs or lighter. The cost of shipping will be sent via invoice. We encourage all customers to log into the FedEx website to calculate shipping. Listed on every item are the directions and information needed to do so. Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-
Used- Excellent Condition- Brooke 5-1/4" Production Milling Drill Press Vise Swivel Base Camlock. 3" Max opening- 5/16" stroke on opening. Cam Lock up. 3622 Powered by The free listing tool. List your items fast and easy and manage your active items.
UP FOR AUCTION WE HAVE A USED 3" OPENING 2 1/2" JAW WIDTH DRILL PRESS W/ REMOVABLE JAWS. THIS USED ITEM IS IN GOOD CONDITION AND WORKS PERFECTLY. THH VISE IS 5 1/2" LONG 5 3/4" WIDE JAWS OPEN TO ABOUT 3" THE VICE IS 2" HIGH. ANY QUESTIONS PLEASE ASK. THANK YOU FOR LOOKING. PLEASE VISIT OUR STOR. Powered by The free listing tool. List your items fast and easy and manage your active items.
This is a nice used Heinrich 8SV Screwless Quick Grip 8" Jaw Opening Drill Press Vise in good condition! Comes as shown on the pictures This item can be picked up in Upland CA or shipped by UPS or freight company. Buyer responsible for shipping and handling cost. Combined shipping available for multiple orders please ask for a revised invoice before paying. Posted with
FROM DELTA D.P. AS SHOWN IN PHOTO DP600 CASTING# ON MAIN HOUSING SPECS: APPROX 3 1/2" DIA. HOUSING DP608-L WITH GRADS. DP607 SPRING HOUSING WORM TENSIONER SCREW. 7/8 I.D. HOLE WITH 7/16-14 RETAINER WING NUT. INCLUDES POINTER FOR DEPTH ALL PARTS SHOW NO DAMAGE. CLEAN UP ONLY
SERVO NO. 7000 MICRO DRILL PRESS.001" VERBALE SPEED Manufacture: Servo Model No. 7000 Table: 6 x 6 1/2" Drill holes down to 0.002” Spindle runout: 0.0002" High accuracy down stop for drilling depth control 0.001” Variable speed spindle(200-20.000 RPM) Quill travel(stroke) 1.5” Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" 0.0039"0.252" Graduated dial gauge for depth control 0.001” Wide selection of bases and accessories Drill capacity:to 1/16" in inconel to 1/8" in steel Electrical: 115 volts AC. 50/60 Hz, 2 amps(220V/115V transformer available)
UP FOR GRAPS HERE IS A USED VINTAGE DELTA MILWAUKEE 17" DRILL PRESS TABLE AND HEAD SAFETY COLUMN COLLAR THAT FITS A 3 1/2" POST. PART NO. IS DP-678 or DP678. SOLID WITH NO CRACKS OR WELDS AND IS 95 PRESENT CLEAN OF THE OLD PAINT. JUST NEEDS PRIMED AND PAINTED. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.