In 
 
Order by: 
Available to: 
Price: 
 - 
$
527.16
Buy It Now
$0 Shipping
Condition: New
Location: Cerritos,CA,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Smithfield,UT,USA
$
4,800
Buy It Now
$0 Shipping
Condition: Used
Location: Detroit,MI,USA
Radial Arm Drill Press By Ab Arboga Maskiner Type RLM/U1 Good Working Condition Unit will be cleaned prior to shipping and prospective buyer can inspect ... morethe machine in our Dalton Ga warehouse prior to purchase. Shipping: Buyer is responsible for shipping costs and due to the nature of this item(s) It/they will need to be shipped via common carrier. Please contact us with your zip code, and whether it would be going to a commercial address with a dock or outdoor forklift(either yours, one you are employed at, or a friend or relative's) one without, or residence for an accurate shipping quote. It is imperative that you provide all pieces of information! Please note residential delivery is typically higher. So it is better to have it/them delivered to a commercial address or to one of our carrier's terminals in your area for pickup at the terminal. Also, we are able to ship using your carrier if preferred, and we will provide the necessary contact information to forward a bill of lading, pickup address, etc. Local pickup is available as well. Can you believe our price? Packoderm Industrial- Eliminating pack rats one sell at a time!
$
5,950
Buy It Now
Free Shipping
Condition: Used
Location: Hopkins,MN,USA
$
4,950
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
$
5,000
Buy It Now
Free Shipping
Condition: Used
Location: Stratford,CT,USA
$
600
Buy It Now
$0 Shipping
Condition: Used
Location: Barrington,IL,USA
$
5,571.24
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
1,475
Buy It Now
Free Shipping
Condition: Used
Location: Little Rock,AR,USA
POWERMATIC HOUDAILLE MODEL 1200 DRILL PRESS VARIABLE SPEED 3 PHASE 230 VOLTS 240-1500 RPM'S AMOUNT OF TRAVEL 16" QUILL- 6" OF TRAVEL TABLE ... moreDIAMETER: 15 1/2" W 18" L CHUCK- GOLDEN GOOSE JT3- 2 TAPER CAPACITY- 16 MM OVERALL HEIGHT 72" PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charges to shipping. Approximate weight: 520 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities LSO/8981/SURPLUS/ 1) E
$
750
Buy It Now
$0 Shipping
Condition: Used
Location: Brooklyn,NY,USA
USED/PRE-OWNED Powermatic 15" Drill Press Model# 1150A S/N 8215S037 Installed a Brand New Vise. Has a Chuck Head that can fit 3/4" Specifications: ... more115-230V/ 1 HP/ 60HZ Swing Over Table: 15" Drilling Capacity: 5/8" Diameter Spindle Travel: 6" Throat Depth: 7-1/2" Table Size: 14" x 10" Motor: 3/4 HP ABOUT JACOBS TREASURE: We travel throughout the country purchasing from estates. Auctions and private sellers. When you purchase you can rest assured that the description is 100% accurate. Don't forget to We have many unique and one of a kind items never before listed on eBay. We welcome your emails. Questions and or comments. Contact us via"contact seller" link. PAYMENT METHOD: PayPal SHIPPING: All items are professionally prepared and packaged for shipping. We combine shipping and in some cases at no extra cost. WE SHIP SOLD ITEMS EVERY FRIDAY. THANK YOU FOR LOOKING. Please take a moment to;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14821865918-0x11a-
$
350
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Clair,MO,USA
Untitled Document Free. Fast Shipping Every Business Day! Delta-Rockwell Delta 17-inch Drill Press Operating and Parts Manual Click for Our Complete Catalog ... moreManual Description: Number of Pages: 16 This is a reproduction. Not a photocopy, of an original Delta-Rockwell 17" Drill Press Operating and Parts Manual. This manual contains information on lubrication, adjustments, maintenance, and controls as well as a complete parts list with exploded view diagrams. This manual also covers the power feed attachment. Covers Drill Press Beginning with serial No. 137-5800 If your machine looks similar to the one pictured. This manual should cover your machine. Delta/Rockwell changed the model number for every little change made on the machine including whether it was floor model or a bench model, the motor size, the spindle size, changes in magnetic switches, the type of fence, etc.For example the 15" Drill Press in one Catalog had over 45 different models. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I ma
$
350
Buy It Now
$125 Shipping
Condition: Used
Location: Greenfield,IN,USA
Vintage Walker Turner pulley guard. Missing parts, dents, scratches, as is. DDP 500 on drill press head casting
$
5,000
Buy It Now
$150 Shipping
Condition: Used
Location: Santa Barbara,CA,USA
$
1,500
Buy It Now
$0 Shipping
Condition: Used
Location: Kalamazoo,MI,USA
Wilton Model 820 Radial Arm Drill Press Operators& Parts List Manual For models: 820 Includes sections on: Operation, Assembly Drawing Parts List ... moreNumber of pages: Approx 25 Condition of original: Good Publication No. N/A Publication date: N/A Added Notes: None Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e7d8750f3-0xff-
$
1,500
Buy It Now
Free Shipping
Condition: Used
Location: Cedarburg,WI,USA
$
5,000
Buy It Now
$0 Shipping
Condition: Used
Location: Great Bend,KS,USA
Area Of Base, 140" X 54" Spindle Speeds, 36) 14 TO 1010 RPM, Spindle Travel, 18" Feeds, 15) 003 TO.074 IPR, Tap Leads, 3) 8. 11-1/2, 14 ... moreTPI, Diameter Of Spindle, 4-11/16" Distance Spindle To Base, 15" MINIMUM. 84" MAXIMUM, Taper In Spindle, 6MT, Travel Of Arm On Column, 49" Travel Of Head On Arm, 78" This machine appears to be excellent. With ways in freshly scraped condition. Main motor is 220-440V 60hz 15hp. All controls appear present and in excellent condition. We are happy to arrange for inspection if desired and can arrange access to 10 ton overhead crane for loading(machine will need disassembly to use 10 ton crane) We are also happy to help arrange a local rigging or millwright service for loading. Buyer responsible for all costs related for loading and shipping. Please feel free to contact with any questions.
$
3,950
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NJ,USA
$
175
Buy It Now
$120 Shipping
Condition: Used
Location: Kent,CT,USA
$
422.75
Buy It Now
$0 Shipping
Condition: Used
Location: Owosso,MI,USA
$
2,926
Buy It Now
$0 Shipping
Condition: Used
Location: Greenwood,IN,USA
$
2,125
Buy It Now
$0 Shipping
Condition: Used
Location: Fort Worth,TX,USA
$
2,381.36
Buy It Now
$4.99 Shipping
Condition: New
Location: Minooka,IL,USA
$
3,200
Buy It Now
$0 Shipping
Condition: Used
Location: Lenapah,OK,USA
$
1,500
1d 4h 38m 49s
0 bids
$0 Shipping
Condition: Used
Location: Freeport,NY,USA
Radial Arm Drill Press By Ab Arboga Maskiner Type RLM/U1 Good Working Condition Unit will be cleaned prior to shipping and prospective buyer can inspect ... morethe machine in our Dalton Ga warehouse prior to purchase. Shipping: Buyer is responsible for shipping costs and due to the nature of this item(s) It/they will need to be shipped via common carrier. Please contact us with your zip code, and whether it would be going to a commercial address with a dock or outdoor forklift(either yours, one you are employed at, or a friend or relative's) one without, or residence for an accurate shipping quote. It is imperative that you provide all pieces of information! Please note residential delivery is typically higher. So it is better to have it/them delivered to a commercial address or to one of our carrier's terminals in your area for pickup at the terminal. Also, we are able to ship using your carrier if preferred, and we will provide the necessary contact information to forward a bill of lading, pickup address, etc. Local pickup is available as well. Can you believe our price? Packoderm Industrial- Eliminating pack rats one sell at a time!
$
495
Buy It Now
Free Shipping
Location: Providence,RI,USA
Used in great condition. Willing to ship for an extra cost.
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: Hastings,MI,USA
$
999
Buy It Now
Free Shipping
Condition: Used
Location: Lunenburg,MA,USA
$
395
Buy It Now
$0 Shipping
Condition: Used
Location: Newark,NJ,USA
$
600
Buy It Now
$0 Shipping
Condition: Used
Location: Linden,NJ,USA
$
6,500
Buy It Now
$0 Shipping
Condition: Used
Location: Anthony,TX,USA
$
5,500
Buy It Now
Free Shipping
Condition: Used
Location: Buffalo,NY,USA
CASER RADIAL DRILL ARM 5’x14’ Manufactured by Caser Manufacturing of Italy The Drill we have for sale Is used but in excellent working order. Drill comes ... morewith some tooling. Included is the slotted box table and built in cooling system. Column Motor is 220/440 volts. 3 H.P. 1730 R.P.M. and the Model Number is MCWS-22. The Drill Motor is 220/440 volts. 1735 R.P.M. and the Model Number is MSCI13929. Asking Price fot this Dril Press is $5500 or bet offer. MAKE ME AN OFFER Drill will and/or can be loaded onto your truck or vehicle. Terms are as follows: Payment in FULL before shipment. Item sold As/Is and is subject to prior sale. All Major Credit Cards are Accepted as well as PayPal as forms of payment Please Contact us by Phone or Email Phone: 1-800-836-2253 Email: sales@hjaint.com Normal 0 false false false EN-US X-NONE X-NONE
$
2,795
Buy It Now
$0 Shipping
Condition: Used
Location: Houston,TX,USA
$
325
Buy It Now
$0 Shipping
Condition: Used
Location: Torrance,CA,USA
$
1,199
Buy It Now
$0 Shipping
Condition: New
Location: Macon,GA,USA
$
4,900
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
400
5d 17h 7m 5s
0 bids
$0 Shipping
Condition: Used
Location: Temperance,MI,USA
$
310
Buy It Now
$0 Shipping
Condition: Used
Location: Clifton,NJ,USA
Walker Turner Floor Drill Press for Wood and Metal USA 1140 Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Walker Turner Floor Drill ... morePress for Wood and Metal USA 1140 THIS ITEM WAS REMOVED FROM A HOME GARAGE AND TINKER CENTER. GENTLEMAN THAT OWNED IT WAS A MECHANIC AND WOOD WORKER. THE PRESS IS IN GOOD CLEAN WORKING CONDITION AND COMES AS SHOWN IN PICS. See Photos for Overall Quality and Condition CLICK HERE TO SEE OUR OTHER BUSINESS AND INDUSTRIAL ITEMS Or.View Our Other Items by Category on the Upper Left Side of this Page WE DISCOUNT SHIPPING ON MULTIPLE ITEM PURCHASES AND SHIP THE DAY AFTER PAYMENT IS RECEIVED WHENEVER POSSIBLE At Maplecroft Sales. We do our best to present accurate, detailed information about every item listed. We are not product experts in every category we may list, therefore, we reserve the right to cancel any transaction, even after auction close, IF the item is found to be not as described. Our goal is 100% customer satisfaction. If you have any questions, we ask that you please contact us via the“Ask seller a question” link in this auction listing before placing your bid so that we can best ensure your satisfaction. Make sure to read the complete description before bidding. TO CONTACT US DIRECTLY CLICK HERE Thanks for Looking All items will ship within 2 business days of payment via either UPS or USPS. The shipping price quoted in each listing is an estimated price and may be subject to change if circumstances as defined by shipper exist such as shipping destination(rural/west coast) and special and/or extra packing. The stated cost for domestic shipments includes the Continental United States Only. Others may request cost via"My Messages" in eBay account. Buyer will receive a notification with the tracking number(UPS) or delivery confirmation number(USPS) when label is printed. Please note that USPS delivery confirmation numbers are NOT tracking numbers and may not update the status of a package until it is delivered. Please allow up to ten(10) business
$
429.99
Buy It Now
$0 Shipping
Condition: New
Location: Brookline,MO,USA
Untitled Document Product Name: Shop Fox W1668 3/4 HP 12 Speed Benchtop Oscillating Drill Press Includes: W1668- 1 HP Benchtop Oscillating Drill Press ... moreInstruction Manual Description: The Shop Fox W1668- 3/4 HP Benchtop Oscillating Drill Press. Features Motor: 3/4 HP. 110V, 1,725 RPM Overall height: 38" Spindle travel: 3-1/4" Swing: 13-1/4" Drill chuck: 5/8" Dust port size: 2-1/4" 12 Speeds: 250-3.050 RPM Table: Round 12-3/8" dia. Table swing: 360 Table tilt: 45 left& 45 right Approx. shipping weight: 130 lbs. Specifications In most cases items will be shipped same day payment is received or next day, United States: FREE LTL Shipping* In the contiguous 48 states(6-18 Day normal delivery time) Currently shipping for this item is available to the contiguous 48 US states only. Shipping is not available to Alaska or Hawaii. Due to the size and weight of many Freight items. Some Freight items are shipped directly from the manufacturer. If this is the case, it is possible for the manufacturer to be backordered on a product We will notify you of any backorder situations and give a timeframe at which time you can decide if you would like to wait or receive a full refund for your purchase. We try to minimize backorder situations as much as possible but it does occasionally occur. Free shipping applies to business address with a fork lift. Loading dock, or customer pick-up at the local shipping terminal ONLY. Residential businesses do not qualify as a business address. Contact us before purchasing if you prefer local pickup. If shipping to a residence. Your shipping location must be accessible by a tractor-trailer truck. Truck drivers will not assist in unloading. Please be prepared for this type of delivery, as you are responsible for unloading. There are usually additional charges for delivery to residential addresses, we will contact you before shipping if there are any additional charges such as limited access, wait fees, or lift gate service. If you suspect that there may be extra fees
$
2,895.95
Buy It Now
Free Shipping
Condition: Used
Location: Johnson City,NY,USA
$
255
Buy It Now
$22.5 Shipping
Condition: Used
Location: Fair Haven,NJ,USA
$
1,139
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
2,650
Buy It Now
$0 Shipping
Condition: Used
Location: El Centro,CA,USA
$
750
Buy It Now
$0 Shipping
Condition: Used
Location: Thousand Oaks,CA,USA
$
8.19
Buy It Now
$0 Shipping
Condition: New
Location: Tulsa,OK,USA
$
11,000
Buy It Now
Free Shipping
Condition: Used
Location: Portland,CT,USA
Natco Multi Spindle Drill Press(inv. 15658) Model: G14 New: 1980 Serial Number: 350 Number Of Spindles 16 Head Area 10 x 24 Inches Dimensions Of Table ... more28 x 19 Inches Table 2 T-Slots Upper Joints 1-1/4 in. Drilling Capacity(cast iron) 0.3125 Inches Drive Motor 5 HP. 550/3/60 Pump Drive 3 HP. 550/3/60 Approximate Weight 5.000 lbs. inv. 15658) Inspect this machine under power at our facility. Inv.1565. Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions
$
100.94
Buy It Now
$10 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,995
Buy It Now
$0 Shipping
Condition: Used
Location: Rochester,NY,USA
$
195
Buy It Now
$0 Shipping
Condition: Used
Location: Plaistow,NH,USA
$
1,199
Buy It Now
$0 Shipping
Condition: New
Location: Prospect,CT,USA
$
3,799
Buy It Now
$0 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
914
Buy It Now
$0 Shipping
Condition: New
Location: Pennsauken,NJ,USA
$
1,400
Buy It Now
$400 Shipping
Condition: Used
Location: Lockport,IL,USA
$
1,119.99
Buy It Now
Free Shipping
Condition: Used
Location: Bethlehem,GA,USA
$
345
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
289.99
Buy It Now
$210 Shipping
Condition: Used
Location: Covina,CA,USA
Buffalo Drill Press with Procunier Lead Screw Tapping Attachment 1/3 HP single phase 1725 RPM(Inv.26043) Not What You Were Looking For? Check out our! ... morewhere we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
$
1,800
2d 2h 25m 15s
0 bids
$0 Shipping
Condition: Used
Location: Almont,MI,USA
Ca rl ton Radial Arm Drill Press*1 7 Repair. Parts& Maintenance Manual For Carlton Models: OF. OA, 1A 52 Pages Condition of original: Very Good. Few ... mores mudges on ori ginal Reproduced from original manual using high quality paper. Shipped by Priority Mail same day or next business day. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Email me if you have questions about this manual See my for more manuals;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f4711810a-0xfa-
$
24.99
Buy It Now
$6 Shipping
Condition: Used
Location: Carver,MA,USA
$
69
Buy It Now
$8 Shipping
Condition: Used
Location: Fair Haven,NJ,USA
CLAUSING DRILL PRESS PART MODEL 1500 THRU ALL 1700 DRILL PRESSES CHECK OUT MY STORE FOR LOTS MORE DI ACRO MACHINES! 732-642-8271. RETURN SPRING ASSEMBLY. ... moreRcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b6cf37501-0x104-
$
200
Buy It Now
$0 Shipping
Condition: Used
Location: Ellensburg,WA,USA
Untitled Document Free. Fast Shipping Every Business Day! Delta-Homecraft 11-inch Drill Press Operating and Parts Manaul Click for Our Complete Catalog ... moreManual Description: Number of Pages: 9. This is a reproduction of an original Delta Homecraft 11" Drill Press Operating and Parts Manual. This manual contains information on operations of this machine. And parts diagrams with parts numbers. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
449.99
Buy It Now
$0 Shipping
Condition: Used
Location: Newtown,CT,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 In 

Past Items  
 
Manufacture: Delta Rockwell Model: Description: Delta Rockwell Floor Model Drill Press 3447 1/2HP 4+" Quill Travel 220/440V Changeable Speeds 80" tall Condition: used good Details: shl11/itw/400 Extra Info: 400lbs Please Fully Read our Policy If it's NOT in the picture. Or in the description, then it will NOT be included in this sale. This applies to power cords, cables, manuals and A/C adapter! If you experience a problem Please contact us FIRST! We strive to do our best to work with customers to resolve issues. All of our auctions include notes on the condition of the item(it may require cables or plugs or even more components to function) If it is not in the picture it is Not included. We do stand behind what we sell. We never intentionally sell defective products unless it is stated as such in the auction(DOA. For repair ... moreor parts) If you have a problem with a product, please contact us right away(within 14 days) If an item is listed as"AS-IS" then it is simply that, AS-IS" and can't be returned. There will be no refunds of any kind on AS-IS items. If auction says"parts or repair" the item is NOT Functioning properly, item is described as best as we can, and has No Returns No Refunds. We acquire our equipment from reliable sources. Many of our items are tested in-house. Some items are not tested, either because we trusted the source of the equipment based on their history with us, or because we are unable to test the equipment(this would be because we do not have proper equipment to test or lack of knowledge in the product itself) Although we welcome your questions and inquiries. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases, all information that we have available to us is included in the text of the auction. Any other questions email us or call! Thanks! Payment and Shipping We accept credit cards over the phone or through eBay check out. Fed-
Manufacture: Dayton Model: 5K412A Description: Dayton 5K412A Drill Press 1/3HP 115V 6.0A 1725RPM 50°C CONT 60Hz Code R Frame A56Z S60CXDPJ-46Z4 1PH 5" Travel Condition: used good Details: das708/itw/150 Extra Info: 150lbs Item must ship freight or be picked up. We can quote thru our shipping company by request, please include zipcode. Commercial/residential status, and if you will require a liftgate, our freight company charges extra for residential address, and for a liftgate, ON TOP OF THE price to your address so let us know residential/commercial and if a liftgate is need! Please Fully Read our Policy If it's NOT in the picture. Or in the description, then it will NOT be included in this sale. This applies to power cords, cables, manuals and A/C adapter! If you experience a problem Please contact us FIRST! We strive ... moreto do our best to work with customers to resolve issues. All of our auctions include notes on the condition of the item(it may require cables or plugs or even more components to function) If it is not in the picture it is Not included. We do stand behind what we sell. We never intentionally sell defective products unless it is stated as such in the auction(DOA. For repair or parts) If you have a problem with a product, please contact us right away(within 14 days) If an item is listed as"AS-IS" then it is simply that, AS-IS" and can't be returned. There will be no refunds of any kind on AS-IS items. If auction says"parts or repair" the item is NOT Functioning properly, item is described as best as we can, and has No Returns No Refunds. We acquire our equipment from reliable sources. Many of our items are tested in-house. Some items are not tested, either because we trusted the source of the equipment based on their history with us, or because we are unable to test the equipment(this would be because we do not have proper equipment to test or lack of knowledge in the product itself) Although we welcome your questions and inquiries. Bidders are expecte
This Auction is for a vintage#2 drift key and hand made#2 drift key Don't know what company made the key has a logo see pictures you may know? Please see picture they are both in good condition not sure about the hand made drift key. Sold-as-is no returns Please see my other listings Thanks
We have here a very nice machine shop storage cabinet. Six drawers and lockable. Heavy duty sliders on each drawer. It was previously used for drills. Taps, and dies. This cabinet can be used for drills. Taps, dies, chucks, reamers, etc. It is heavy duty industrial quality. The cabinet dimensions are: 24.5" W x 18" D x 15" H. The cabinet weighs 100 lbs. Because of weight. A"business address" is required for shipping this cabinet. Looks to have been repainted at some point in time. Looks like a wavy"crinkle" finish to hide dirt and grease) Hard to find these nice ones. Plenty of pictures. Be sure to check my other auctions for additional items. Click Here for More Good Stuff! Really heavy. So allow $165.00 shipping and handling to anywhere in the lower 48 states. Or. Pick-up for"free" if you are ... morenear Philadelphia. If shipped. A"business address" is required because of the weight. Plenty of pictures posted. Note: The pictures below are high-resolution photo’s. If you are in need of additional“Zoom-in” capability for a particular picture. Simply click on the picture and copy it. Then paste to your desktop and“Zoom-in” on it there. Summary of Selling Policies for This Item Restrictions If any item I sell is considered restricted by your state or local government. It is your responsibility as the buyer to know your local laws and obey them accordingly. All bidders/ buyers must be 18 years of age or older; no exceptions. By placing a bid you are explicitly verifying that you are 18 or older. Shipping to the lower 48 states only. Payment PAYPAL ONLY. Please use“Pay Now” if you are the winning bidder/purchaser at the end of an auction. Please use“Contact Seller” if your payment will be delayed more than a day or so. I reserve the right to re-list, if payment is not received pursuant to the foregoing. Shipping Your Item(s) will always be carefully and securely packaged. A"business address" is required for this item. Shipping to the lower 48 states only. Ship
Old 900 series oil cap. Part stripped ready for paint Posted with
Description UP FOR SALE IS INVENTORY# SC-5163. ROCKWELL MODEL 20 DRILL PRESS. SERIES 70-6x0. SER# 1805922. CONDITION OF ITEM 1) NEW AND IN BOX 2) NEW BUT NO BOX X 3) USED. AS-IS 4) FOR PARTS ONLY Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international fees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective ... moreway of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.169.0
good used 5 morse taper- tap driver no mfg marked 1 3/8" hole with 4 set screws FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
One Used USA Drill Bit 5/8. 2MT shank, 5 1/2" drill length, 9" OAL, HSS, 118 degree I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One Used USA Drill Bit 7/8. 3MT shank, 6 1/2" drill length, 11" OAL, HSS, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One Used USA Drill Bit 59/64. 3MT shank, 6 1/2" drill length, 11" OAL, HSS, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One Used USA Drill Bit 49/64. 2MT shank, 6 1/4" drill length, 10" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One Used USA Drill Bit 43/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f0ca081d5-0x106-
One Used USA Drill Bit 41/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One Used Chicago Latrobe Drill Bit 39/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
One Used USA Drill Bit 37/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Delta Milwaukee Electric Motor vintage styling model UL 62A410 CCW single phase single voltage 115V 1/3 HP 60CY 1725 RPM CCW shaft rotation capacitor start induction run single 1/2" shaft w/ flat for set screw mounted pulley ball bearings- steel foot mount fan cooled ODP very clean good original paint and legible motor tag cast iron frame full length ungrounded cord some marks on shaft- do not affect usage bearing history unknown bench tested under load no bad noises- runs as designed an ideal motor for your drill press lathe restoration or what have you hard to find in such good condition check O W W M for more information/ compatibility- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders ... morewith less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! This GE 1.5 HP. 9 Amp, 120 VDC motor is in very good condition. Used but not abused. Great for lathes. Drill presses and other various shop applications where you need a variable speed DC motor. Nice heavy flywheel and pulley attached. We don't know the RPM of this motor but we would guess it to be between 5500 and 7500 RPMs. She really cooks and is a very smooth running motor. See our Item# 300905759296 for a variable speed controller for this motor. 10% discount if purchasing to motor and controller together. WE SHIP FAST! On May-26-13 at 03:09:20 PDT. Seller added the following information:
HEAVY DUTY 10-1/8" x 5-3/8" x 6-1/2" x 1" THICK DRILL PRESS ANGLE PLATE Click Images to Enlarge ​HEAVY DUTY 10-1/8" x 5-3/8" x 6-1/2" x 1" THICK DRILL PRESS ANGLE PLATE WEIGHT: 32 LBS COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 33 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between ... more1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and to
Vintage Stanley machinists vise. Hard to find model no. 994A. Jaws are 4" and vise opens to 4" Total length closed is approximately 10" The removable jaw plates are gone and new ones will have to be made. Size 4" x 2" x 1/4" with 2 tapped holes. The vise works fine. I.e. opens and closes with ease. It is marked with the Stanley name on the top, and the end of the handle is marked with"Made In USA- No. 994A"
Cameron Micro Drill Press Model 164D-7 You are bidding on 1"Used" Micro Drill Press(Very little use! Included with this auction are the following: Instruction sheet Micro Drill Press 1 spare drive belt Single Speed Motor Three Step Pulley for Spindle Speeds: 9.500; 17,000; 30,000 RPM(Includes extra belt) Smooth Rack and Pinion Feed Drills Small Holes(0.002" TO 5/32" Can Drill to the Center Of a 5" Work Piece Spindle Run Out at the Chuck Mounting Taper is within 0.0002" Dynamically Balanced Spindles. Pulleys and Motors for smoothness in operation Slotted 4" x 4" work table with 5/8" center hole Maximum distance from chuck to table is 5 3/4" Maximum distance from chuck to base is 7" Maximum spindle feed travel is 1 1/4" Overall height of indicator is 17" Overall depth is 11" ... moreOverall width is 5 1/4" Table size with clamping slots and a 5/8" center hole is 4" x 4" Dial depth gauge has 1/2" travel Weights approximately 10 lbs. Payment is due 2 days after the end of this auction. USA deliveries only Local pickup is free in the MPLS. MN area
BT# 14357 TJ-099.1Y You are looking for: JET JDP-14-J BENCH DRILL PRESS 1/2" DRILLING 1/2HP 2500RPM USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: JET. Additional info: BENCH DRILL PRESS Model: JDP-14-J Chuck Size 1/2" 14" Swing 1/2" Drilling Capacity 1/2 HP 2500 RPM Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by
Manufacturer: Delta Model: 14-040- Drill Press Drill Chuck Included! Serial: R9116 Condition: We do not know the working condition of this machine. We do know it was being used at the school in which it's located until they stopped using it and declared it as surplus. There is an arm missing from this machine. Does not affect the operation of driving the drill head down. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME ... moreOF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th AND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. HP: 1/2 R.P.M: 1720 Electrical: 115/ 230 V 1 PH*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items are being sold for Holland Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Manufacturer: Delta/ Rockwell Model: 17-430 17" Drill Press Drill Chuck Included! Serial: 83A77029 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 17 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your act
Manufacturer: Delta/ Rockwell Model: 15-665 15" Drill Press Drill Chuck Included! Serial: 1455188 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a drill offered by Delta/ Rockwell. Perfect for the home or office. Swing(in) 15 Drilling Capacity(in) 5/8 Chuck Size(in) 1/2 Table Size(in) 11" x 14" best guess) Electrical: 115 Volt 60 Hz 1 PH Dimensions: best guess) Length: 25" Width: 22" Height: 75" Weight: 400 lbs*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Highland Park Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your acti
Dayton 1-1/2 HP. 5/8 In Chuck, 1 Phase Floor Drill Press This is a Dayton belt driven floor drill press with a 20 inch swing. The drill press has a 5/8 inch chuck size. 16 speeds, and is made from steel and cast iron. It features a 1-1/2 HP motor, is 120/240 V, and 6 inches of spindle travel. The original packaging for this item is ripped all the way along and the top has been mostly cut off. The styrofoam inside has been broken in half and does not completely cover the unit. The drill press itself looks like it was hit on its control panel side and the face is cracked/broken and the start and stop buttons are pushed in. The fan for the motor of the unit has had its back grille dented in to the point that the blades can not move. It can most likely be removed and hammered out or replaced. See pictures for more details. Photos in the slideshow ... morereflect actual photos of the items. The main image is typically a stock photo. Please contact us if you have any questions. Technical Specifications Item Floor Drill Press Type Belt Drive Swing 20" Motor HP 1-1/2 Phase 1 Voltage 120/240 Hz 60 Amps AC 16/ 8 Capacity Cast Iron 1" Capacity Steel 1" Spindle Speed 119 to 3605 Number of Speeds 16 Chuck Size 5/8" Spindle Taper MT3 Spindle Travel 6" Spindle to Table 26-3/8" Max. Spindle To Base 45-3/8" Column Dia. 3-39/64" Quill Dia. 2.441" Table Work Surface 18-5/8 x 16-5/8" Table Slots 9/16" Base Size 17-5/8 x 22-1/2" Overall Height 70-1/4" Overall Width 34" Overall Depth 18-1/4" Please view all the pictures before bidding. The pictures are your best insurance to prevent hassles when attempting to return items. Shipping Weight: 360 lbs, The shipping option you are presented for this item was chosen based on appropriate options(weight. Box dimensions, contents) We reserve the right to choose the method that best suits our needs, even though we may be taking a hit on shipping costs. We prefer to ship FedEX Freight. If you have a strong preference for one carr
Item Information Item Name: DELTA MILWAUKEE DOUBLE DRILL PRESS STATION Item# 10414 Price/Each: $499.00 Year: Brand Name: DELTA MILWAUKEE Model: Serial# Asset Tag: A4518 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description DELTA MILWAUKEE DOUBLE DRILL PRESS AND TABLE 3" QUILL 1/2 HP EACH UNIT 1725 RPM 220 VOLT 60 Hz 3 PHASE DIM: 76"H x 48"W x 30"L Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire ... morepayments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork,
Buffalo number 15 15 inch drill press 460-6300 rpm New 1/3 hp Baldor TEFC motor Jacobs geared chuck& key Super duty Dual ball bearings within spindle pulley Dual ball bearings within quill for spindle New switch. Wiring and cogged V belt $495 Come see it or give us a call with any questions The Tool Consignment Store 560 New Park Ave West Hartford. CT 06110 860-263-7908 You can pick it up or you can get a quote from frieghtquote. com
Motor mounting bracket without slow speed attachment receiver. Older style did not have slow speed attachment. Sandblasted to see casting condition. Ready for paint after minor stripping. Posted with
Quill and head lock assembly. Stripped and ready for paint to match your set up or great for restoration project Posted with
Older style feed handle and shaft. Signs of use and wear. Stripped for your restoration project Posted with
For Sale: Drill Press Guard/guide 3 1/8" diameter on top 2 5/8" diameter on bottorm Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited ... moreall monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also be reached by e-mail. I will answer your e-mails or calls as
CRAFTSMAN MACHINIST TILTING DRILL PRESS VISE 5 1/2 391.5187 Manufacture: Craftsman CRAFTSMAN MACHINIST TILTING DRILL PRESS VISE 5 1/2 391.5187 Condition: Pre-Owned Warranty: 90 Day warranty Sold as pictured Please feel free to contact us if you need more information Wesbell Technologies ships all domestic orders via UPS Ground. If you would like the order shipped on your account please send an e-mail after you purchase the item and we would be happy to adjust your invoice. Thank you for looking Customer Satisfaction Beyond the Call Wesbell Technologies 555 Lucy Garrett Road Roxboro. North Carolina 27574. USA 1-336-322-0600 Ext. 262 Powered by The free listing tool. List your items fast and easy and manage your active items. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f12d4ddc5-0x105-
PALMGREN AV-24-1 Jaw Drill Press Vise Manufacture: Palmgren PALMGREN AV-24-1 Jaw Drill Press Vise. Condition: Pre-Owned Warranty: 90 Day warranty Sold as pictured Please feel free to contact us if you need more information Wesbell Technologies ships all domestic orders via UPS Ground. If you would like the order shipped on your account please send an e-mail after you purchase the item and we would be happy to adjust your invoice. Thank you for looking Customer Satisfaction Beyond the Call Wesbell Technologies 555 Lucy Garrett Road Roxboro. North Carolina 27574. USA 1-336-322-0600 Ext. 262 Powered by The free listing tool. List your items fast and easy and manage your active items.
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. 14" ROCKWELL. Single Spindle, HP 3/4, 115 V 60/1, 1726 RPM Our stock number: 21670 MODEL NUMBER: 14-000 SERIAL NUMBER: 1302027 GENERAL SPECIFICATIONS Floor Model Drill Chuck Spindle Hand Feed 10-1/2" x 10" Plain Table 4 Spindle Speeds. V Belt 1/3 H.P. 1725 R.P.M. 115 Volts 60/1 Phase Toggle Switch Shipping Dimensions: 25" x 17" x 76" Tall F.O.B. Cincinnati. Ohio 45223. PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 www.cwwood.com info@cwwood.com ... morebhaun@cwwood.com normw@cwwood.com 800-745-6008 Payment Information We accept Visa. Master Card, Discover, Bank Wire Transfers and Checks. PayPal’s processing fees are outrageous so we will accept Paypal. But you will be charged a 4% fee. To pay with PayPal please contact Mimi at 800-745-6008 ext. 42 and she will send you an invoice through PayPal with the additional 4% fee. Shipping Information Domestic: We ship freight collect with Echo Global Logistics. ICCI, or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Daniel Stein 248-989-1389 ICCI: Tyler Rose 1-888-773-6785 All quotes will be for regular business delivery unless otherwise specified. International: All international shipping is to be set up by the buyer. Recommended Custom Built Crates: 513-248-4422 Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item Any item purchased with a pick up or delivery date more than 10 days from date of sale may be subject to a storage fee. ple
Manual by Craftsman The Drill Press over 100 drill press operations described and illustrated 30 pages printed 1965 Sears Roebuck and Co. Very nice condition PAY PAL PLEASE PAY AT END OF PURCHASE. I WILL COMBINE SHIPPING. LET ME KNOW. THIS WILL SAVE ON POSTAGE CHARGES. ANY QUESTIONS PLEASE LET ME KNOW BEFORE YOU PURCHASE OR BID. Thank you for looking. Have a great day
Up for bid is the high speed and low speed pullys off of a delta dp220 14" drill press. They are both in good shape but dirty. The high speed pully has a couple very minor bends in the fins but nothing that would mess with the functionality of the pulley. There are no cracks or breaks in the pulleys. These are just for the spindle. Not the motor. You would need to find the motor pulley. I am not sure if they used the same pulley for the motor for high and low speed. Please ask questions before bidding. Thank you.
Up for bid is the cast iron base off of a Delta dp 220 drill press. This is the stand alone type. Not the smaller bench top type casting. Item is in good condition. There is one blemish I assume from the original casting. It is shown in the second picture. It is a small hole that goes through to the inside. There are no cracks around it or sign of damage so I am pretty sure this is from the original castin and could be filled easily. It weighs about 50 pounds, hence the shipping cost. Please ask questions before bidding. Thank you.
Up for bid is a complete Delta Milwaukee 14" dp 220 drill press foot feed assembly. Item is in good condition with no breakd or cracks in any of the castings. This came off of a working press and it worked as it should. It would clean up nicely or use as is. The third picture shows the only issue with it. There is a broke off screw in one of the locking collars for the main rod. This could be drilled out easily with the right tools. It comes with 2 springs. Only one is needed. Please ask questions before bidding. Thank you.
Up for bid is a Delta Milwaukee reitrement light used on the drill press. Band saw or scroll saw. light is in great condition and would shine up really nice or keep the patina. Light works like it should(light bulb will not be shipped) and has no cracks, breaks or epairs of any kind. All links are present and it ahs the original Hubbell socket. Please ask questions before bidding. Thank you.
Delta Rockwell Drill Press With Chuck 1200 RPM 1/2 HP 3-PH Safety Guard Category: Drilling Machines Sub Category: Single Spindle Stock No. 4963 Serial# 32-3303 Location: Fullerton. CA. Table 17" x 12.5" Chuck Capacity 0.31" 0.63" Speed 1200 RPM Motor 1/2 HP Electrical Requirements 440V/ 3-PH. 0.9A/ 60 Hz Approx. Dimensions 28" x 21" x 70" Equipped With: H-Chou 8mm-16mm Capacity Chuck. Sterling Cros Line Motor, and Rockford Systems Safety Guard. Price… $650.00 Contact Information: ACT MACHINERY 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, ... morespecifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 10 business days until check clears. ACT Inc. accepts all major credit cards with a 3% Surcharge: Visa. Master Card, and American Express. We also accept Pay Pal as payment of goods purchased and payment upon pickup. SHIPPING; Customer Is
Here we have a VTG RARE INDUSTRIAL SHAFFER HEAVY STEEL DRILL PRESS VICE: 7" LONG X 5.25" WIDE X 3.5" HIGH FIXED BASE. THIS IS A VERY WELL MADE HEAVY INDUSTRIAL STYLE FIXED BASE DRILL PRESS VICE. MARKED WITH SMALL LETTER ON TOP OF MOVING SIDE OF CLAMP: SHAFFER. BASE HAS A MOUNTING SLOT ON EACH SIDE OF VICE. Please see the pics for the exact item you will be recieving. ITEM comes AS-IS so please bid accordingly. Please bid confidently. Good Luck Bidding and Adding this item to your collection! Check out my other auctions for more vintage and unique items. So some good deals will be had. Most of my items come directly from my collection and put right on Ebay. My items are sometimes old and may need some cleaning. You never know what I may find or what might pop up! Feel free to ask any questions you may have about the item. Shipping ... moreor PAYMENT, as I will answer all questions as soon as I can. Shipping will be Calculated, I DO COMBINE SHIPPING WHEN WINNING MORE THEN ONE ITEM. Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Machinist Vise Base is 7" long. 3" wide and 2 7/8" tall Weighs 7 1/2 pounds Jaws open to 3 1/2" Good operating condition Typical stains and wear for its age Don't see a manufacturer's mark There is the number 16 stamped on the bottom Thanks for your interest. Please see my eBay store for my other available items. Buyer is responsible for shipping and handling cost. All my auctions use the shipping calculator. When buying multiple items please let me know and wait for a revised invoice with the combined S&H cost calculation. The item will ship within one business day from payment clearance. If the item arrives damaged or is not as described contact me for a full refund.
We are selling one(1) Fauver Drill Press Serial Number 26231 We are selling this in"as is" condition. Please email us to see this machine or any other machines we have listed. Good luck!
DESCRIPTION Avey Drill Press MA-6 Size 3 Type B Manufacturer: Avey Model: MA-6 Year: Condition: Used Specifications: Model Number MA-6 Size 3 Type B HP 3/1.5 Voltage 440 Phase 3 RPM 1120/540 Cycle 60 Amps 5/4.8 For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS ... morewill combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnor@essindustrial.com. Mac DB: 4123-1397-BD
HEAVY DUTY INDUSTRIAL DRILL PRESS ANGLE PLATE 6" x 8-3/4" x 11-1/2" x 1" THICK Click Images to Enlarge ​HEAVY DUTY INDUSTRIAL DRILL PRESS ANGLE PLATE 6" x 8-3/4" x 11-1/2" x 1" THICK COMES AS SHOWN WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 37 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs ... moreneeding standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from ma
7" x 8" x 16" x 1-1/16" THICK INDUSTRIAL HEAVY DUTY DRILL PRESS ANGLE PLATE Click Images to Enlarge INDUSTRIAL HEAVY DUTY DRILL PRESS ANGLE PLATE COMES AS SHOWN ​7" x 8" x 16" x 1-1/16" THICK WEIGHT: 52 LBS. WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' ... morepallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Ind
I had listed this a few weeks ago but realized late in the sale that I called for a#2 Morse Taper when it has a#3 Morse Taper. My apologies to those who were interested in bidding back then. So here it is again and described to my best knowledge. Cincinnatati-Bickford radial arm drill press. Heavy duty drill press made in the USA the way all things should be. Other than the usual chipped paint and grubbiness this machine is in excellent condition. It has a 3 phase 1 horse power motor at 230 volts. The distance between the#3 Morse Taper spindle center and the column is 32 inches. The overall dimensions are 70 inches tall by 50 inches deep and 30 inches wide. It has power feed on the spindle and to raise and lower the power head on the column. This was a government surplus machine and has been well taken care of with regular service. We have ... moresince upgraded and this is no longer of use to us. I do not know the shipping weight on this machine. I would estimate it to be 2000 pounds or more. This machine is strapped to a pallet and ready to ship. Buyer pays all applicable taxes and freight charges.
sharp used 4 morse taper shank drill marked HSS china 1 5/32" x 13" long please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $11.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Home ~ Affiliations ~ Discounts ~ FAQs ~ Grading and Certification ~ Premium Shipping ~ About Us VINTAGE ART& ADVERTISING CURATED COLLECTIONS 1951 Ad Atlas Press Woodworking Kalamazoo Michigan Wood Lathe Drill Press Saw Details Year: 1951 Type: Original Print Ad Grade: Very Fine ++ Authentication: Dual Certificates Image: Black/ White Approximate Size(inches) 6 x 9 Approximate Size(cm) 15 x 23 Description and Condition This is an original 1951 black and white print ad for tools from the Atlas Press Company of 1255 N. Pitcher Street of Kalamazoo. Michigan. CONDITION This 60+ year old Item is rated Very Fine ++. Light aging throughout. No creases. No natural defects. No surface rub. No tears. No water damage. To find other items from this specific collection in our eBay store. Please. Keywords specific to this image: bench saw. Pricing. ... morePSC1A12C51 188612_PSC1_130 Product Pricing& What We Deliver At times we receive inquiries about our pricing. Especially for vintage advertising or historical halftone prints, and are asked why our prices are consistently higher than some other sellers of similar items. For the first five years of our business, we asked our primary consumer base what they wanted. Our primary consumers- historical societies, historians, archivists, curators, university professors, historical decorators, and collectors, etc. have diverse and specific needs and we've built our business to accommodate those needs, like no other seller worldwide. Below is what is unique about how and what we offer as the world's leader in print ephemera: Product Packaging. Every product is placed against custom black acid-free board with crystal-clear. Archival protective closures. We are the only sellers in the industry who provide display-quality black boards with every item(which also make exceptional presentations for gift-giving) Oversized engravings are protected by museum quality tubes. Product Pictures. Online digital images to evaluate the original products are imaged high resolution. 100% perpend
Clausing 22V Variable- speed drill press has a 2-speed motor and runs good has a crank up and down production table also has a 3 morse taper spindle questions please call Tom at 507-437-4753 I can get the machine banded to a pallet and covered for shipping. I can also help find affordable rates. Powered by The free listing tool. List your items fast and easy and manage your active items.
Atlas 1060 Drill Press Pulley Set. These items are almost impossible to find these days. One of the pulleys has chips on it as it can be seen in the pictures. But they can be easily welded and smoothed out. The other one has been damaged in transit and cracked in two, also visible in the pictures. That one can be welded and smoothed out as well. Those who are well accustomed with their Atlas 1060 will know that fixing those flaws is not a big issue, and that the pulleys will work perfectly afterward. Please contact me for an accurate shipping quote.
1) 1-1/2 Drill capacity. All Gear Driven Gears in Oil bath. 2) 8 Spindle speeds(3) Power feed to spindle to spindle with course and fine feed adjustments.004 and.007 per rev) 4) 1.5/2.2hp drive motor(220v/3 phase, Easily run on single phase with small phase converter. 5) MT4 Spindle, Complete with Arbor. 6) 12" Spindle to column(7) 32 1/2" max, to table(8) 47" Spindle to baseplate. 9) 5-1/2 column Dia. 10) 20' x 16" Table(11) 6-1/2 Quill Travel(12) 728 lbs Has foot control to facilitate instant reverse when tapping. In Drilling Mode foot pedal acts as Start/Stop. Feed mechanism has auto shut-off which can be set to stop feed when proper depth is reached. Feed Gears were just replaced with New machine is good to go. Note: machine must be Locally picked up, The machine is very heavy so remember that when you bid. The ... moreMachine is expensive to ship. It`s a good Machine for someone`s shop Good Luck Bidding!
This is a good working and clean paper drill. It comes with one bit and one block. Every thing on it works properly including lights vacuum and the machine itself. If you have any questions past what I have specified please ask and I will answer them to the best of my ability. I would prefer not to ship this but if necessary you can arrange for freight pickup after it is purchased.
For sale: Square pattern wrench. Could be used for a tailstock. Lathe, arbor, etc. 5/8" wide 5 1/2" handle. Only marking on this item says No. 10 on the handle. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 ... moredays of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00
DELTA ROCKWELL 1/3 HP MOTOR WAS REMOVED FROM FUNCTIONING 24" DELTA SCROLL SAW. MOTOR WAS TAKEN APART. CLEANED AND NEW BEARINGS WERE INSTALLED. CAN ALSO BE USED ON A BAND SAW. SANDER, DRILL PRESS OR OTHER TOOL THAT REQUIRES A 1725 RPM MOTOR. THIS MOTOR IS DUAL VOLTAGE CURRENTLY SET AT 115 VOLTS BUT CAN BE CHANGED TO RUN ON 230 VOLTS. IT IS A REVERSIBLE MOTOR WITH DUAL 1/2" SHAFTS. IT IS A MODEL 62-110 MOTOR THAT HAS A XD52 FRAME(THIS FRAME PROPERLY FITS THE ROCKWELL DELTA 24" SCROLL SAW) COMES WITH NICE CORD. SWITCH AND SWITCH BOX.
MILLING AND DRILL PRESS TOOL HOLDERS TOOL HOLDERS WORK IN SOME VERTICAL MILLS AND DRILL PRESSES PICTURE 1: ALL ITEMS FOR SALE PICTURE 2: 5) ITEMS THAT HAVE NO IDENTIFICATION MARKINGS PICTURE 3: DEVLIEG MICROBORE#s AX300-E87. AX300-E62, AX300-E75, AX300-4M, AX300-3M, AX300-2M, AX300-37, AX300-E50, AX300-E37 PICTURE 4: DEVLIEG MICROBORE FLASHCHANGE#s AX300-H410. 50FC-E100, 2) 50FC-5J W/JACOBS COLLET CHUCK PICTURE 5: DEVLIEG MICROBORE FLASHCHANGE#s TH40FC-BC3. TH50FC-4M, TH50FC-100, DEVLIEG MICROBORE 50M-4M, SCULLY JONES AND CO. 59B PICTURE 6: DEVLIEG MICROBORE FLASHCHANGE(2) TH50C-BC16. AX300-H410, 50M-S150 WITH GREENLEAF CORP INSERT 4" DIA R.H. ETRP-90 TPEN-53P12R 5350 PICTURE 7: DEVLIEG MICROBORE FLASHCHANGE 50FC-E62. 50FC-200, WELDON TOOL 3/4 CN-5#50MM STD, UNKNOWN BRAND 7/8 50MM, DEVLIEG MICROBORE 50FC-5M*PLEASE VIEW PICTURES CAREFULLY- ... moreSOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charges to shipping. Approximate weight: 230 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities. RAB/ 6563/ SKID#204/ 1) E
VINTAGE MORSE TWIST DRILL& MACHINE CO. CHUCK NO.2B VERY SMOOTH. HEAVY DUTY, HIGH PRECISION, KEY LESS CHUCK. RANGE 0-3/8" I BELIEVE THE MOUNTING TAPER TO BE A 33 JT. HAS A SPANNER WRENCH HOLE ON THE SIDE. THE CHUCK IS 3- 1/4"s LONG AND 2- 1/8"s AT ITS LARGEST DIA. WOOD BOX APPEARS TO BE ORIGINAL. THIS IS A VERY NICE VINTAGE PIECE OF USABLE MACHINE HISTORY! PLEASE ASK QUESTIONS BEFORE BIDDING. PAYMENT IS DUE WITHIN 3 DAYS AFTER THE AUCTION HAS ENDED. THANKS FOR LOOKING! Posted with
Offering a quill lock handle for a 15" Clausing drill press Any questions: e-mail. Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
Offering a Quill feed pinion shaft for a 17" Rockwell Delta drill press This is for the early style 17" drill with head casting#DP-600. It won't fit the newer 17" with the switch inside the front head casting Any questions: e-mail. Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
SKU: UR626623RA A: 0015000000mIrdV O: 0065000000NKaEx PA: 0015000000kLkjs View Photo Gallery. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Milwaukee 4206-1 Drill in good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Milwaukee Model: 4206-1 Serial# ... more838B606120104 Shipping weight: 75 lbs. Shipping dimensions: 24”L x 18”W x 18”H Features: 3/4-in chuck capacity. 12.5 amp motor, 350 RPM Solid state electronic switching Feedback speed control Specifications: Voltage: 120V Amperage: 12.5 Chuck Capacity: 3/4-in RPM: 350 Cord Type: 9 ft. Fixed Construction Type: Grounded Electronic Feedback: Yes Tap Capacity: 1-in-14 Drill Point Pressure: 1.630/1,670 lbs. Adjustable Base: Yes Drill Travel: 11-in Chuck or Taper: Chuck Tool Weight: 70.0 lbs. Condition: Unit is fully funtional Average wear and tear from prior use and age See photos for further details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to
DESCRIPTION: PICK UP IS AVAILABLE. USED. PALMGREN 8X16" SLIDE TABLE. THE TABLE IS 4 11/16 HIGH APPROX. THE BASE MEASURES 11 1/4 X 9 7/8 APPROX. THE MOUNT HOLES ARE 10 1/4 AND 9" APART O.C. APPROX. NO CRACKS OR REPAIRS. THE TABLE SLIDES SMOOTHLY. IT WILL BE PACKAGED WITH CARE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; ... moreNO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and Intern
DELTA 8" BENCH TOP DRILL PRESS(MODEL 11-900) IN VERY GOOD CONDITION. I WILL ALSO INCLUDE A USED SET OF TITANIUM COATED DRILL BITS. THERE ARE A COUPLE SMALL BITS MISSING. SEE PHOTOS FOR ACTUAL ITEMS YOU WILL RECIEVE. PLEASE ASK QUESTIONS BEFORE BIDDING AS ALL SALES ARE FINAL. DUE TO THE WEIGHT OF THIS ITEM. THIS IS A LOCAL PICK-UP ONLY LISTING. I WILL NOT SHIP THIS ITEM. PAYMENT CAN BE MADE BY CREDIT CARD THRU PAYPAL OR BY CASH WHEN ITEM IS PICKED UP. THE ITEM WILL BE RELEASED UPON PAYMENT VERIFICATION THRU PAYPAL OR WHEN I RECIEVE THE CASH. THANK YOU!
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Delta Rockwell Metal Drill Press. Model 15, 3 Phase Item Description: This is a Delta Rockwell Drill Press. Model 15. FEATURES: from the manufacturer&146s plate) Model: 15, Power: 3/4 hp, Power Requirements: ... more230/480v. 3.0/1.5 amp, Speed: 1725 RPM, Table Size: 11" x 14" Unit powers on. But was not tested for functionality. Notes: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Richmond CA. 94803 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33961) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Additional Information: Chuck Size: unknown Table Size: 11x14 Motor HP: unknown Power Requirements: 208-220 Volt 3-Ph Item Tested? Item passed power on test no other functions tested&nbsp, nbsp, Sales Tax: PLEASE NOTE: If you pay immediately at the end of auction using the eBay payment method please
SKU: 639914 A: 0015000000Jjb1h O: 0065000000Mkp7A PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Carolina SF-15 15" Vertical Drill Press With 5/8" Chuck in good operating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Carolina Model: SF-15" Type: Vertical Drill Press Serial No: 52208 Features/Specifications: Swing: 15" Throat: 7.5" Recessed work light MT#2 spindle taper 12 speeds Single phase motor 5/8" chuck ... more33"x27" base plate Dimensions& Weight: Dimensions: 48"L x 42"W x 72"H Shipping Weight: Approx 230 lbs Condition: Good- working at time of decommission Normal wear and signs of use from previous use Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: This item will be shipped on a pallet. There is a minimum charge of $75 for palletizing this item. This fee includes professional palletizing. Banding, wrapping and loading of this item so it is legal and ready for an LTL carrier to transport. Buyers will be assessed a $10 handling fee for the local pickup of item(s) as shown
Here we have a VTG DURACRAFT INDUSTRIAL MACHINES 1/4HP SP-30 BENCH DRILL PRESS(WORKS GREAT) MFG DATE: 1981-10. SER. NO. 104955. CAPACITY: 1/2" IN. THIS IS A VERY WELL BUILT, HEAVY& WORKING MACHINE. Please see the pics for the exact item you will be recieving. ITEM comes AS-IS so please bid accordingly. Please bid confidently. Good Luck Bidding and Adding this item to your collection! Check out my other auctions for more vintage and unique items. So some good deals will be had. Most of my items come directly from my collection and put right on Ebay. My items are sometimes old and may need some cleaning. You never know what I may find or what might pop up! Feel free to ask any questions you may have about the item. Shipping or PAYMENT, as I will answer all questions as soon as I can. Shipping will be Calculated, I DO COMBINE SHIPPING ... moreWHEN WINNING MORE THEN ONE ITEM. Powered by The free listing tool. List your items fast and easy and manage your active items.
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 04131750097 Manufacturer: WILLIS Description: WILLIS 20VS DRILL PRESS 20' Capacity: 20' Model Number: 20VS Serial Number: 9907047 Additional Information: 16' X 18' TABLE BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE YO
SKU: 2304944 A: 0013000000CXCfg O: 0065000000MkENO PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Clausing 2277 Vertical Drill Press 20" Swing Variable Speed. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Clausing Model: 2277 Type: Vertical Drill Press Serial No: 527799 Features/Specifications: Swing: 20" ... moreThroat: 10" Clausing Motor: 1.5 HP- 460V- 2.1/2.0A 1725/850 RPM- 60 Hz- 3 PH Variable Speed: 900 RPM: 150-1000@ 1800 RPM: 300-2000 Jacobs chuck Allen-Bradley power control Debris shield Dimensions& Weight: L 22" x W 34" x H 69" Shipping Weight: 675 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Some rust to table- see photos Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dime
VERY NICE. OLDER CRAFTSMAN DRILL PRESS ATTACHMENT FOR MORTISING. I'M NOT SURE THIS IS A COMPLETE BECAUSE THE BOX WAS OPEN BUT IT LOOKS LIKE IT'S ALL THERE. IT HAS A BUSHING AND A SPACER IN THE PLASTIC BAG AND THE MAIN ATTACHMENT HOUSING. ALL LOOK TO BE VERY LIGHTLY USED. THIS LOT ALSO INCLUDES CRAFTSMAN 1/4" 3/8" AND 1/2" CHISEL BITS AND DRILLS. ALL THE TOOLS I'M LISTING THIS WEEK ARE FROM A LOCAL ESTATE. UNLESS OTHERWISE STATED, THEY ARE ALL IN VERY GOOD TO EXCELLENT ORIGINAL CONDITION. MANY HAVE SPOTS OF LIGHT SURFACE RUST FROM OUR VIRGINIA HUMIDITY. PLEASE CHECK OUT MY OTHER ITEMS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
This Vac Force 2000 is a Drillmate Ltd product made in Australia and is used for surfaces that a Magnetic Drills are unable to attach to. Example: Stainless Steel. Marble, Wood Products, Et cetera. I purchase this Item in a bankruptcy sale and have never had call to use this product before. That being said I did hook up my small compressor to it and it stuck to my kitchen table. The bond was good. The pneumatic cylinder that is the press mechanism functioned as well. There is a ajustable collar on the cylinder were you attach the Drill. The collar adjusts up& down and rotates. When the proper position is found, set scews secuer the drill and position on the cylinder. I removed the Quick Attach for the air conection to make the item better for shipping, The quick connect will be mailed with the item. I do ship world wide. Please contact ... moreme for a Shipping Quote before Bidding. I do offer Combined Shipping. I will try to answer any questions that you may have. Thank you.
Another Dan West Auction Jarvis Torqomatic Auto-Reversing Tapping Machine Drill Press Attachment model303 Here offered is a very nice and working Jarvis Model 303 auto reverse auto tapping machine. This machine fits onto the spindle of drill press. The head is lowered to the work and the tap starts in the hole at the proper depth you slightly raise the drill head and the tap reverses. It quick and reliable and repeatable. The capacity is as stated on the tag 5/16- 5/8" Overall size is appx 13 3/4" long and the inside diameter where the spindle fits is 2 1/4" It weighs appx 10 lbs. for shipping. If your in need of a good reliable tapping machine and have a drill press that has a 2 1/4 spindle then take a look at our photos. Add this one to your inventory of shop equipment. Check out our online West Mercantile Store for antiques. ... moreVintage Books and Victorian buttons. Click Here for"West Mercantile" We gladly combine shipping on same week multiple purchases! Bookmark this site if you want to pickup some great items for your collection of Civil War era memorabilia. Remember OLDGUNHUNTER Help yourselves folks to this neat item. This is a NO RESERVE AUCTION! Great Gift for the Special Person! We guarantee all our items 100% Shipping charges apply to lower 48 United States. Shipping charges may very to Western U.S. as well. We try to get as close as possible to the actual shipping charges for each package but reserve the right to request additional funds to Western U.S. as well as Alaska& Hawaii. We also reserve the right to add insurance to the cost since eBay's system will allow only $4.00 shipping charges for books in the rare book category. We will not inflate the insurance charges. WINNING BIDDER TO PAY SHIPPING AND INS. ALL WITHIN 7 DAYS OF AUCTION CLOSE CHECK OUT OUR OTHER UNIQUE ITEMS ON EBAY THANKS. DAN Powered by The free listing tool. List your items fast and easy and manage your active items.
WILTON VSG TWENTY DRILL PRESS M/N 2025 BELOW IS SOME INFO I FOUND ONLINE ABOUT THIS MODEL# AND IS FOR INFORMATIONAL PURPOSES ONLY. www.ipstool.com/Catalog/0287.pdf AUCTION INCLUDES ALL PARTS SHOWN WITH DRILL PRESS NOTHING AROUND THE PRESS IS INCLUDED. PULLED FROM A WORKING ENVIROMENT. BUT WE HAVE NOT TESTED SO THIS ITEM AS ALL OF OUR AUCTIONS ITEMS IS BEING SOLD AS IS AND ALL SALES ARE FINAL. FORKLIFT IS AVAILABLE FOR LOADOUT. FREIGHT CAN BE ARRANGED BY BUYER OR WE CAN ARRANGE AND ADD TO INVOICE AND LOCAL PICK UP IS AVAILABLE. Check out my other items!
Offering a 1/2" Jacobs 633C drill chuck with locking collar This is the chuck used on most of the USA built small drill presses such as Delta. Craftsman, Walker Turner etc. Chuck is in good condition. Moves freely through it's full range Happy to combine shipping on multiple purchases
Offering quill return spring with housing for a 17" Rockwell drill press This will fits the early model Rockwell Delta 17's with DP-600 head cast# Any questions: or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
Offering a quill clamp casting for a Rockwell Delta 17" Drill press This fits the 17" drills with DP-600 head casting This will not fit the later style 17" drills such as the 17-400 or 17-600 series Any questions: Or call 724 882 6449 I have many parts for drill presses. Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases
They look to be Morse taper 1. Tap holders. Spring loaded extension. No name brand. Look to be in great shape. Taps not included. Remove before shipping. No international shipping. Check out my! Flat rate shipping 10.00 lower 48 states.
CLAUSING DRILL PRESS PART MODEL 1685 CHECK OUT MY STORE FOR LOTS MORE DI ACRO MACHINES! 732-642-8271. COLUMN LOCK.
POWERMATIC DRILL PRESS PART#1150 MODEL ALL THESE PARTS ARE OFF A WORKING MACHINE THAT WAS PARTED OUT. CHECK OUT MY STORE FOR LOTS MORE STUFF LIKE THIS. 732-642-8271 COLUMN RING 3"
DI ACRO CLAUSING DRILL PRESS PART MODEL 1500 THRU ALL 1600 DRILL PRESSES CHECK OUT MY STORE FOR LOTS MORE DI ACRO MACHINES! 732-642-8271. COLLAR SPINDLE
DELTA ROCKWELL DRILL PRESS PART MODEL# 15-000 THRU 1600. MAY BE SOME SURFACE RUST ON SOME ITEMS FROM LAYING AROUND THE SHOP NOTHING MAJOR. THIS IS A USA MACHINE NOT THE TAIWAN VERSION! NEWER STYLE WITH FOUR BOLT MOTOR MOUNT!
TWO BRETT GUARDS CAME OFF BAND SAWS. THESE HAVE LIGHTS BUT NEED BULBS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f1f82d706-0x101-
One used TRW Drill Bit 11/16" with 1/2" shank. 3 1/4" drill length, 6" OAL I have several more taper shank and reduced shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items, and if you win multiple items wait till I send an invoice to reflect correct shipping. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE
For sale is a pre-delivery setup manual for John Deere LL-A Press Grain Drills. The manual is in very good condition with no rips. Tears, loose or missing pages or handwriting. It numbers 34 pages and includes illustrations. It is number PDI-M15557M. Please contact with any questions or requests for additional photos.
sharp used 4 morse taper shank drill. 1 3/32 UTD USA please check my other auctions and happy bidding! we always happy to combine items for the cheapest shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
Rockwell Manufacturing 15-650 Drill Press The unit powers-on and the drill spins; the speed does also adjust. However it sounds very rough internally with some grinding sound. I'm not sure if it needs oil or something more major. Selling for parts or repair. LOCAL PICKUP ONLY Posted with
One used USA Drill Bit 31/32" with 1/2" shank and 3 flats for gripping. 3 1/4" drill length, 6" OAL I have several more taper shank and reduced shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. But please let me know if you are bidding on multiple items, and if you win multiple items wait till I send an invoice to reflect correct shipping. I accept PayPal only. I do not ship outside the USA. Thanks for looking. Normal 0 false false false EN-US X-NONE X-NONE a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f242e954b-0xec-
good used machine crank approx.900" square x 8 1/4" long Fairmount USA will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a Medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Craftsman Adjustable Angle Machinist Drill Press Vise 0- 90 Degrees Item Description Shipping and Payment Spuds will combine shipping on multiple items when possible. Please feel free to e-mail me if you have any questions. Alaska. Hawaii along with US Territories and APO's shipped via USPS Priority Mail may require additional shipping charges. INTERNATIONAL BIDDERS. WE WILL ACCEPT ONLY U.S. FUNDS. Please check out Spuds' other auctions. New items added every day. inkfrog terapeak. I000000. InkFrog Analytics.
Cincinnati Fosdick 24" Single Spindle Drill Press Description: In absolute excellent condition in& out. This machine is a"USA MADE MONSTER" Super Heavy Duty. Features down feed. 3HP spindle motor and Starrett Dial indicators for fine feed. Everything on this machine is in 100% working condition and it comes loaded with all the bells and whistles outlined below. Check out our feedback& bid with confidence! Check out the short video below of the machine under power: Cincinnati Fosdick 24" Single Spindle Drill Press Manufacturer: Fosdick Model: 24 S/N: Year: Specifications: Swing 24" Table 18" x 36" Spindle Speeds 60-1500 rpm Feeds.0012-010" I.P.R. Spindle Motor 3HP. 480V, 3PH Weight 3150 lbs Equipped With: Starret Dial Indicators Boring Head Power Down Feed 3HP Push Button Forward/Reverse The ... moreabove information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Any taxes shall be paid by the buyer in addition to the quoted purchase price. DELIVERY DATES: While every effort will be made to meet quoted or verbal delivery dates. Those dates are estimated target dates only. Date of delivery is not guaranteed as those delivery dates are necessarily subject to fire, strikes, or labor trouble, storms, acts of governmental authority, acts of public enemies, freight embargo, acts of God, and the like. ACCEPTANCE: All propo
Original Drill Press Vise. Works smooth, very tight, no backlash, clean jaws. Missing original handle. A few drill strikes as shown. Base has been repaired. Repair is solid, could use a little cleanup and paint tho. I have seen other bases that have had the ears cut off and new mount holes drilled inboard of the original slots. This repair looks fine and functions well. Posted with
aims DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Delta/ Rockwell. This is a used Heavy Duty Multiple-Speed Drill Press in working condition. Serial# 109-8021 Specifications: Tables: Production Table Size: 17" x 12-1/2" Base Working Table Size: 13-1/4" x 9-3/4" Spindle: Throat: 8-1/2" Swing: 17" Taper: 2 Morse Taper Spindle Travel: 5" Column: Column Diameter: 3-1/2" Column Length: 56" General: Motor: 1 Horsepower. 1,725 rpm, 220/ 440 Volt, 3.2/ 1.6 Amps, 60 Hz Electrical: 220/ 440 Volt. Three Phase Overall Dimensions: 21" x 32" x 62" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool ... morecurrently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS DELTA/ ROCKWELL 17" MULTIPLE-SPEED PEDESTAL DRILL PRESS Reliable Tool Inc. c 2011 | Powered by
aims BUFFALO 18" MULTI-SPEED PEDESTAL DRILL PRESS- 18 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Buffalo. This is a used Heavy Duty Multi-Speed Pedestal Drill Press in working condition. Model# 18 Specifications: Tables: Production Table Size: 14" x 14" with 2" trough Base Table Size: 12" x 11" Capacities: Throat: 9" Swing: 18" Spindle: Spindle Taper: 3 Morse Taper Quill Depth: 5" Number of Speeds: 5 Spindle Speeds: 500- 925- 1.725- 3,280- 6,000 rpm. Column: Column Diameter: 4" Column Height: 58" General: Motor: 1 Horsepower. 208-220/ 440 Volt, 1,750 rpm, 3.4/ 1.7 Amps, 60 Hz Electrical: 208-220/ 440 Volt. Three Phase Overall Dimensions: 20" x 37" x 78" tall. Comes as shown in pictures. Check out the photos! ... moreif you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BUFFALO 18" MULTI-SPEED PEDESTAL DRILL PRESS- 18 BUFFALO 18" MULTI-SPEED PEDESTAL DRILL PRESS- 18 BUFFALO 18" MULTI-SPEED PEDESTAL DRILL PRESS- 18 BUFFALO 18" MULTI-SPEED PEDESTAL DRILL PRESS- 18 BUFFALO 18" MULTI-SPEED PEDESTAL DRILL PRESS- 18 Reliable Tool Inc. c 2011 | Powered by 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f25ed3f05-0xfc-
CLAUSING 15" DRILL PRESS Description Information Lot Number Pre-2127 Manufacturer Clausing Model 1752 Serial 15-129485 Column Diameter 3" Drill to center of circle 15” Spindle Dia. 1.74” Spindle Taper MT-3 Spindle travel 4 3/4” Spindle Speeds Range 400. 800, 1600, 2800, 5400 RPM Table working Surface 12" x 18" Motor 3/4 HP. 1725 RPM, 115-230 V/1PH/ 60Hz Shipping weight 300 LBS Condition USED. IN EXCELLENT WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $100 charge for Crate(Outside of Shipping& Handling Cost) Crating Fee Waived if picking up and don’t need it crated. REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid ... morefor the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment
YOU ARE BIDDING ON A USED MILWAUKEE MAG DRILL. THIS DRILL HAS A SMALLPIECE OF HOUSING MISSING ON THE TOP AS SEEN IN PIC. BUT IS IN GREAT WORKING CONDITION. SHIPPING WILL BE 100 DOLLARS ANYWHERE IN THE LOWER 48 STATES. THANKS FOR LOOKING.