1 Drive Impact Wrench 1 Impact Wrench 1 Inch Impact 1/2 Air Drill 16 Gauge Air Nailer 16 Gauge Stapler 3/4 Impact Wrench 90 Degree Drill 90 Drill Air Hose Reel 50 Air Impact Wrench 3 8 Air Nailers Air Needle Scaler Air Rivet Gun Air Rivet Tool Air Riveter Air Screwdriver Air Stapler Air Tool Accessory Kit Aircraft Gun Aircraft Rivets Aro Air Tools Aro Grinder Atlas Copco Air Tools Atlas Copco Drill Atlas Copco Pneumatic Bostitch Floor Nailer Bostitch Floor Stapler Bostitch Framing Bostitch Stapler Bucking Bar Cherry Max Chicago Pneumatic Gun Chicago Pneumatic Impact Wrench Chicago Pneumatic Rivet Clecos Coil Nailer Compression Riveter Crown Stapler Desoutter Dotco Air Tools Dotco Grinder Duo Fast Stapler Dynabrade Grinder Finish Stapler Floor Nailer Floor Stapler Flooring Nailer Flooring Stapler Frame Nailer Framing Air Nailers Framing Nailer Goodyear Air Hose Hardwood Floor Tools Hitachi Hitachi Framing Nailer Hitachi Nailer Huck 352 Huck Rivet Gun Impact Wrench 1 Inch Ingersoll Rand 1 Impact Ingersoll Rand Drill Ingersoll Rand Impact Wrench Inline Oiler Matco Impact Wrench Nail Gun Nails Nailer Nutrunner Palm Drill Palm Nailer Pneumatic Air Tools Pneumatic Chipping Hammer Pneumatic Drill Pneumatic Driver Pneumatic Grinder Pneumatic Rivet Gun Pneumatic Torque Wrench Pneumatic Wrench Pop Riveter Right Angle Die Grinder Rivet Bucking Bar Rivet Buster Rivet Set Rivet Set Tool Rivet Shaver Rivet Squeeze Rivet Squeezer Riveter Senco Senco Nailer Senco Pw Shear Wrench Siding Nailer Sioux Air Drill Sioux Air Tools Sioux Drill Sioux Grinder Sioux Tool Tool Uryu
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
19.5
Buy It Now
$4.5 Shipping
Condition: Used
Location: Louisville,KY,USA
$
78.95
Buy It Now
$8.95 Shipping
Condition: Used
Location: Wetumpka,AL,USA
Desoutter SDT140-T510-S4Q Pneumatic Air Shutoff Screwdriver This tool retails for almost $1200 new. I tested this tool and it is awesome. You know quality ... morewhen it's in your hand and this is quality. Model: SDT140-T510-S4Q- Output Drive: 1/4" Hex- RPM: 510- Torque Range: 3.5-14.0 Nm- Fitted Sprong: 3.5-10.0 Nm* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
$
235
4d 13h 25m 15s
0 bids
$19 Shipping
Condition: New – Open box
Location: Chicago Heights,IL,USA
$
189.99
Buy It Now
$0 Shipping
Condition: Used
Location: Perry Hall,MD,USA
$
125
Buy It Now
$8.88 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
249.95
Buy It Now
$14.95 Shipping
Condition: Used
Location: Nappanee,IN,USA
$
775
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Curryville,MO,USA
$
299.9
Buy It Now
$128 Shipping
Condition: For parts or not working
Location: Greece
This riveter works great. It is made by GBP and is exactly the same tool as the Huck 353 riveter. It cycles smoothly and comes with a 1/4" lockbolt ... morehead. great rivet gun for aircraft or semi tractor trailer repairs.
$
17.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Milwaukee,WI,USA
$
17.32
Buy It Now
$0 Shipping
Condition: New
Location: Millington,TN,USA
$
639.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
$
179.25
Buy It Now
$14.95 Shipping
Condition: Used
Location: Gresham,OR,USA
$
64.99
Buy It Now
$14.99 Shipping
Condition: New
Location: Norman,OK,USA
$
3,175
Buy It Now
$10.85 Shipping
Condition: New – Open box
Location: New Philadelphia,OH,USA
$
309.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
199.99
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Ventura,CA,USA
$
362.25
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
47.99
Buy It Now
$0 Shipping
Condition: New
Location: Carter Lake,IA,USA
Here is a brand new Bostitch PN50 mini impact nailer up for auction. Item is in unopened original packaging. NO RESERVE! I accept PAYPAL only as payment. ... moreShipping is set at $9.00 and quote is good for Continental US only. Auction is to be paid for within 3 days of close of auction. Thanks and good luck!
$
9.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Fort Wayne,IN,USA
$
89.99
Buy It Now
$0 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
5.99
Buy It Now
Free Shipping
Condition: New
Location: Juniata,NE,USA
$
70
Buy It Now
Free Shipping
Condition: Used
Location: Philadelphia,PA,USA
$
280
Buy It Now
$10 Shipping
Condition: New – Open box
Location: Ansonia,CT,USA
$
588.16
Buy It Now
$0 Shipping
Condition: New
Location: Melville,NY,USA
$
74.72
Buy It Now
$0 Shipping
Condition: New
Location: Sturgis,MI,USA
$
225
Buy It Now
$8.5 Shipping
Condition: New
Location: San Antonio,TX,USA
$
40
Buy It Now
$12 Shipping
Condition: Used
Location: West Palm Beach,FL,USA
$
290
Buy It Now
Free Shipping
Condition: Used
Location: Saint Paul,MN,USA
$
35.99
Buy It Now
$0 Shipping
Condition: New
Location: Fort Lauderdale,FL,USA
$
159.99
Buy It Now
Free Shipping
Condition: Used
Location: Bristol,CT,USA
$
7.22
Buy It Now
$5.99 Shipping
Condition: New
Location: Magnolia,DE,USA
$
49.9
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
6.53
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
Coilhose Pneumatics ATL004W Wintergrade-45�F Air Tool Lubricant 4oz. Coilhose Pneumatics ATL004W Wintergrade-45�F Air Tool Lubricant 4oz. While many air ... moretool lubricants quit working below freezing temperatures. Coilhose ATLW provides lubrication down to-45� F. ATLW Anti-Freeze Lubricant can be applied via conventional air line lubricators or directly into the air tool�s air inlet fitting. Warning: ATLW is not an additive and should not be mixed with other lubricants. This could result in a reduction of its de-icing and lubricating effectiveness as well as gumming of internal components. Welcome to FastoolNow on eBay! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Combined Shipping To save you some money. We offer combined shipping on multiple eBay purchases of different items made within a short period of time. FastoolNow will send you a combined invoice with a revised shipping total. Payment We accept the following forms of payment. PayPal Sales Tax For shipments to Michigan addresses. We are required by State law to collect 6% Sales Tax. Customer Service We accept returns up to 14 days after you receive your order. In order for us to be able to accept your return. Your items must be in good condition, and be in the original packaging. Please note that shipping charges are not refundable and a restock fee may apply to special orders. When you receive your shipment, please inspect the packaging carefully. Note any damage to the package with the driver at the time of delivery. Please provide up to 7-10 days for returns to be inspected once we receive it. Customer is responsible for return freight. Of course, customer satisfaction is always our goal- so don't hesitate to call us at 1-888-654-8898
$
27.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
62.06
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
180
Buy It Now
$15 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
28.24
Buy It Now
$5 Shipping
Condition: New
Location: USA
Store Categories. Click to close full size. MARSON HP-2. Riveter, Deluxe, 3/32, 1/8, 5/32, 3/16 In. MARSON. Item Specifics. Item. Rivet Tool. Type. HP-2 ... moreDeluxe. Grips. Rubber Composition. Item. Rivet Tool. Includes. Interchangeable Nosepieces. Application. Sets Rivets: 3/32. 1/8, 5/32, and 3/16" from One Side of Work. Construction. Die-Cast Aluminum Alloy. Type. HP-2 Deluxe. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no complicated discount structure. We are able to keep our prices low. We have a small. Dedicated staff that works hard to bring you the best products at fair prices. We love it whether you buy
$
27.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
33.76
Buy It Now
$0 Shipping
Condition: New
Location: Beecher,IL,USA
$
280
Buy It Now
$15 Shipping
Condition: Used
Location: Minneapolis,MN,USA
$
159
Buy It Now
$7 Shipping
Condition: New
Location: Farmington,MI,USA
$
14.98
Buy It Now
$0 Shipping
Condition: New
Location: Harbor Beach,MI,USA
$
109.99
Buy It Now
$0 Shipping
Condition: New
Location: Minneapolis,MN,USA
$
16
Buy It Now
$0 Shipping
Condition: New
Location: Dalzell,SC,USA
$
189.95
Buy It Now
$0 Shipping
Condition: Used
Location: Spokane,WA,USA
$
149
Buy It Now
$7.5 Shipping
Condition: New – Open box
Location: Canyon Lake,TX,USA
$
325
Buy It Now
$13.5 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
94.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Los Angeles,CA,USA
$
49.95
7h 57m 15s
0 bids
Free Shipping
Condition: New
Location: Corona,CA,USA
$
44.99
16h 17m 7s
0 bids
$15.45 Shipping
Condition: Used
Location: Boaz,AL,USA
$
29.99
Buy It Now
$8.75 Shipping
Condition: Used
Location: San Antonio,TX,USA
STANLEY-PNEUMATIC NUTRUNNER-3/8" 1/4" HEX, USED, A30LQATA-11F2, 730 RPM. I COMBINE SHIPPING.
$
8.99
Buy It Now
$0 Shipping
Condition: New
Location: Muskegon,MI,USA
$
13.51
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Nashville,TN,USA
$
254.99
Buy It Now
$0 Shipping
Condition: Used
Location: Edison,NJ,USA
$
677.3
Buy It Now
$23.93 Shipping
Condition: New – Open box
Location: Canada
$
55
Buy It Now
Free Shipping
Condition: New – Open box
Location: Gleason,TN,USA
$
30
Buy It Now
$15 Shipping
Condition: Used
Location: Naples,FL,USA
$
29.99
3d 16h 0m 34s
0 bids
$14.95 Shipping
Condition: Used
Location: Boaz,AL,USA
brand new in the box air tool made by aro tools ingersoll rands industrial tool lineup better and more expensive than ingersoll own lineup they are owned ... moreby the same company. this tool comes brand new in the box with tool hanging hook for storage the paperwork and of course as seen in pictures the original box. the tool is an air pneumatic 1/4 inch hex output screwdriver that has reverse. the tool has a paddle style lever very easy to use and reverse is activated with push of both paddle and button on side forward is just the paddle depressed. this tool exhaust iits air out the back of the tool to help direct air away from operator and work area. it has a soft red skinsulate comfort coating a trademark item by aro ingersoll rand company. its their to help operator with cold temperature transfer to hands during prolonged use and also the texture provides grip and is easy on the hands. this tool is very high dollar industrial style designed to be used all day every day if need be and will last for years problem free. look at pictures and see this is worth purchasing good luck bid now bid often save this auction in your watch lists don't let this one get away great gift for any do it yourself-er tools are always a great gift to have received. I only ship to continental united states by using USPS services but I do make exceptions if i am notified through email to decide on another location shipment. I do combine shipping if buyer contacts me to verify items can be shipped together. If you would like item insured please let me know as this is extra all items will be shipped with tracking information via USPS or FedEx. I do accept returns under one condition: that i sent an item to you that was clearly not as described in the items auction. In this case i will return costs of item not shipping costs once item is returned in same condition as shipped originally. I only accept Paypal payments. Pictures in listings are of actual product being sold. This is a no reserve auction highest bidder wins. If you win an item
$
699.99
Buy It Now
Free Shipping
Condition: Used
Location: Moultrie,GA,USA
$
21.02
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
 In 

Past Items  
 
This listing is for a Fluke model 322 clamp meter in excellent shape. This meter comes with a soft case. Instruction card, and the lead wires. This item has been tested and functions great! All items are GUARANTEED and have a 14-day money back guarantee to be as described/pictured(unless otherwise stated in listing) So BID WITH CONFIDENCE! Buyer pays all shipping costs. If you have any questions. Feel free to ask. Thanks and good luck!
Remarkable tool for removing piano hammers from shanks. Whether grand or upright. Also removes upright butts from shanks. The tool combines a pliers with knurled grippers that hold the shank rigid, while a lever separates the hammer or butt from the shank. No damage is done to the shank, hammer head or butt. Before extracting the part, you need to soften the glue joint with heat. This tool used to be made and sold by Renner. But has been discontinued, so you can no longer get them. The price of the tool when it was discontinued a few years ago was about $175.
American WW2 Thompson SMG Screwdriver These World War Two produced Thompson SMG screwdrivers are still in great condition for their age. And are a must have for any Thompson collector or enthusiast. We provide a fast and friendly service with quick dispatch and shipping. Please don't hesitate to contact us if you have any questions. For more WW2. Modern Military and Surplus products visit our EBay shop at. Please add us to your. We are always adding new& interesting products to our range. PAYMENT– Paypal is ideal. For UK customers we also accept cheques and postal orders. POSTAGE- We will post anywhere in the world. Please contact us for the cost of shipping to your particular location if not shown. MULTIPLE ITEMS- We are more than happy to combine shipping for multiple item orders. Please buy all your interested items and then click‘Request ... moreinvoice’ RETURNS POLICY– We understand that with online shopping. Especially for clothes, boots and hats that it’s sometimes necessary to return items. We are happy to accept returns, please refer to our returns policy for more details. Epic Militaria- Quality kit. Good prices, Great service, check out our
These retail for over $112.38 from Klein. These are a used pair of KLEIN 63035 UTILITY WIRE CABLE CUTTERS in great shape. The cutter is SHARP do be careful. I coated them with red-oxide primer to protect them from humidity rusting on my service truck. Why buy new when you can get a pair for 50% off? PRICED TO SELL! Made from forged steel with a black-oxide finish for long life Shear-type hook jaws grab and hold cable while shear-cutting action makes clean cuts Beveled tips for positive mating Hinge bolt with pin-set nut for proper blade tension MCM Cable-Cutting Maximum Capacity: 350 Copper. 350 Aluminum. Overall Length: 16-3/4-Inch Weight: 3.0-Pound NO FOREIGN SHIPPING. NO CANADA. 50 US STATES ONLY! I COMBINE SHIPPING FOR MULTIPLE PURCHASES. Note on Shipping charges. As you know. USPS really hiked their rates recently. Also now, ebay charges ... more10% to the sellers of their shipping charge listed on the auction. Sellers DO NOT make money on shipping. We usually LOSE money, especially if you factor in the time and gas used to go mail the item. Inflation is real. Shipping charges are proof of that. It is what it is! If you are local feel free to pick the item up for free in 5 days with NO SHIPPING CHARGES. PLEASE CHECK OUT MY OTHER AUCTIONS AS I AM PLANNING TO PIECE OFF A COMPLETE MASTER A.S.E. METRIC MECHANICS SET. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-14040315429-0x109-
CNC Lathe Tool Holding Reducing Sleeves 1 1/4" OD x 1" ID. 3/4" ID, 1/2" ID x 2 1/4" long 3 pc set ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3819 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
Optics setup tool You are bidding on an optics setup tool of some sort. It cam in with a large lot of optics items that we bought last year. Most of it is sold but this is still available. It measures 14 1/2" x 9 1/2" and 6 1/2" tall. Please let me know if you need more pictures or anything else. Buyer to pay actual shipping costs for UPS to lower US or Canada. If you are not happy with your auction item for any reason. Please feel free and return it for a full refund. If you are not happy. We are not happy. A22 Credit cards processed over the phone if needed. Please use paypal if possible. Powered by
This is marked Germany. this measures 3" long. this will be wrapped to ensure safe and undamaged delivery. Because of Ebay’s Stricted Selling Policy I ask you the customer to please leave me a 5 star rating. If you feel that I have not Deserved a 5 Star Rating PLEASE contact me first before leaving feedback. I can make things right as I am a very customer orientated seller. Terms and Info: ASK QUESTIONS Before you Bid. BE SURE TO VIEW all PICTURES. Refunds granted only when there is a GROSS error in my description. You must respond within 3 days of receiving item and ship it back in 7 days with delivery confirmation. Buyer pays return shipping. Items are Sold. AS FOUND. I do not even like cleaning them up, I am afraid that I may do it wrong. I will combine items won to save on shipping and handling fees. Handling fees are calculated ... moreinto shipping. Covers bubble wrap.Padded envelopes etc. I want to protect your items. Normal handling time ONE DAY. I ship daily. But do not have control over how long the carrier takes to deliver your item when using economy shipping. So Don't hold it against me when leaving feedback. High Bidder pays through PayPal. In US funds. Return Policy…We have a very good return policy. We just asked that you the customer follow some simple rules. Most items are insured through the post office. If you receive an item that is damaged due to the post office being rough with the package please let us know immediately. You must keep the original package and the materials. This is because the post office may need to inspect. We will file the claim and normally get a response back in seven business days. International Buyers– Please Note: I offer 2 different shipping options for you to choose from. FIRST CLASS MAIL. By choosing this option you agree to hold me harmless on any late or lost mail. United States Postal Office can only track a package up to the point that customs receive it. Priority Mail. By choosing this option your package not only gets to you faster but it can b
Ingersoll Rand Pneumatic Air Earth Tamper Concrete Construction Tool Model IR 34 INGERSOLL RAND COMPACTOR TAMPER CONCRETE CONSTRUCTION TOOL! REBUILT CONDITION! RUNS LIKE NEW! PROFESSIONALLY REBUILT BY CERTIFIED AIR TOOL MECHANICS! WORKS GREAT FOR TAMPING THE ROCKS OR SAND UNDER YOUR CONCRETE. VERY IMPORTANT TO COMPACT THE MATERIAL UNDERNEATH TO MAKE SURE THE CONCRETE LAST! MODEL# IR-34 SPECS: 800 BLOWS PER MINUTE! RECOMMENDED AIR PRESSURE 90PSI! AIR INLET 1/2" 6" DIAMETER SHOE BUTT CFM: 60 HEAVY DUTY RELIABLE TOOL! WE HAVE SOLD MANY OF THESE UNITS AND NEVER HAVE HAD ONE COMPLAINT! WE HAVE MANY MORE SIZES AND BRANDS IN STOCK. CHECK OUR STORE FOR MORE GREAT DEMOLITION CONSTRUCTION TOOLS! EMAIL US WITH YOUR QUESTIONS! WE COMBINE SHIPPING TO SAVE YOU MONEY!
Up for auction today is NUSSBAUM Viega Z2#22609. For compression connectors The tool opens up to almost 3" For use with the metal press systems, for Geopress connectors, recommended to pressing tool: PT2 PT3H, PT3-AH, PT3-EH, Pressgun 4E and 4B, battery pressing tool manufacturer Holger Clasen, Geberit/ Mepla-pressing tool type PWH 75, type N 230 V type N battery, Geberit/ Mapress-pressing tool type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201 and Ridgid RP 10-S, RP 10-B, 330C RP, RP 330B. Please see photo's as these are pictures of the actual item You will receive. Any questions please ask before bidding. Thank You for taking out time to look at our Auction. Payment by Paypal only at this Time. Paypal with in 24 hours of close of Auction or please contact me by email if you need more time. If you bid you are entering ... moreinto a Contract to purchase the listed item. Failure to pay will result in me contacting Ebay with a non paying bidder notice after 4 days. I ship out my items with in 3 Business days after payment is received. All returns(IF RETURNS ARE ALLOWED* must be done within 14 Business Days after recipt of item. You must contact me first for a confirmation number on any return of any item. We charge a 5% restocking fee on most returns. Buyer pays all shipping and handling charges on returns. INTERNATIONAL BUYERS PLEASE NOTE: Import duties. Taxes, Custom Fees and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We DO NOT mark merchandise values below value or mark items as“gifts” US and International government regulations prohibit such behavior. Warranty Policies. We will guarantee that this item will be in the condition stated above upon rec
This is a 1/8 scale metal tool cabinet. Perfect for the Pocher 1/8 Ferrari or Porsche display. Measures 8 inches tall and 9 inches wide. Very heavy. Has rolling casters.
Selling this Klein Lineman's Pole Tree Climbing Belt and Pole Does not have the harness.see the pictures. You can save a lot of money here.Model#3245N21 Size 36-44 Date 9/90. There is one tool pouch. These items are in good pre-owned condition and do show signs of usage but can save you money! See the pics.you get exactly what you see in the pictures. Thanks for looking and happy bidding! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1404062a9f4-0xf9-
Description: Emco Unimat 3 Accessory, Compound Slide 171190 with Tool Holder and Wrench. Plus various. 1/4" HSS and Carbide Tipped Cutting Tools Notes: Unimat 3 accessories are hard to find in excellent working condition. Condition: Compound Slide in excellent working condition. S ome oxidation of a superficial nature from age. Could use a quick cleaning. Cutting tools in fairly used to excellent condition. Shipping: Charges will be a flat rate shipped anywhere in the US; No where else. I ship from Ann Arbor. Michigan 48103. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I ... moredo not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. Sold as shown If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
Up for sale is a Aloris tool post model CXA. Item is in good usable condition and comes with the tool holders described below. Items could have scratches and marks from use. 2 = CXA#2 one has a Kenametal insert holder# NC3 SCLPL-062. 1 = CXA 4 boring tool holder with boring bar and inserts. 1 = Cut off tool holder# 25-6 92356 with isertable cut off tool. I have no inserts for this cut off tool. Item has been ground to fit a CXA# 2. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in ... moreyour favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the se
Up for sale is a MGTBN-25-6 cut off tool block with cut of tool. Block is in good usable condition. Cut of blade has were on one end with worn insert. I have no other inserts for this item. Fits a 1" tool holder. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and ... morehonor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Grou
for sale is an a used milwaukee model 0513-21 14.4volt hammer drill tool only item has been used and has scratches.Marks,paint,etc,etc from normal use item has been tested and is in working condition what you see in pictures is what you will get thank you for looking and good luck
Inventory Number: 06130330043 Manufacturer: Description: 14 CARBOLOY BA75216 MILLING CARBIDE GROOVING TOOL BITS Capacity: Model Number: Serial Number: Additional Information: NEW OLD STOCK. SOME SHELF WEAR, QUANTITY 14. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item
CONE SHAPED ARTIFACT! THIS AUCTION CONSISTS OF A SOLID. HEAVY( 1 1/2 POUNDS) CONE SHAPED HARDSTONE ANCIENT INDIAN TOOL! THESE CAME FROM A GOOD FRIEND WHO COLLECTED ALL SORTS OF OLD INDIAN ITEMS,FROM ALL OVER, AND HE HAS RECENTLY PASSED AWAY. UNFORTUNATELY, ALL THE PROVENANCE INFORMATION IS LOST, SO I CAN NOT PROVIDE DETAILED INFORMATION ON THIS PIECE. FRANKLY-I DON'T KNOW WHAT IT IS! IT LOOKS LIKE SOME SORT OF GRINDING TOOL, PERHAPS, LIKE A METATE, BUT I DON'T KNOW. IT COULD HAVE BEEN A TOOL TO POUND WITH, TO SOFTEN HIDES OR DRIVE WOODEN STAKES? THIS IS A GOOD OPPORTUNITY FOR A KNOWLEDGEABLE COLLECTOR TO GET A GREAT DEAL! ONE SIDE IS FLATTENED BY USE. THIS TOOL MAY HAVE SERVED A DUAL PURPOSE! GUARANTEED TO BE AUTHENTIC. EVERY THING IN HIS COLLECTION WAS ACQUIRED CAREFULLY AND WITH ATTENTION TO REALISM AND QUALITY. ATTN: I HAVE HAD ... moreTHIS INPUT- The hardstone cone-shaped tool is a pestle primarily used for grinding grain" Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 GREAT FOR DISPLAYING. TRADING OR EVEN A NEW COLLECTION. GET THIS NOW! I DO NOT MAKE MONEY ON POSTAGE. NOR DO I CHARGE FOR PACKAGING MATERIALS, BUBBLE WRAP, BOXES, TAPE, LABELS, POST OFFICE TRIPS, PACKING TIME, ETC. I SHIP USPS PRIORITY MAIL. I CHARGE THE CALCULATED U.S.P.S. POSTAGE ACCORDING TO THE WEIGHT OF THE ITEM. PLUS 50 CENTS TO HELP DEFRAY THE PAYPAL COSTS CHARGED TO ME ON THE PAID POSTAGE COSTS. COMBINING SEVERAL WINNING ITEMS WILL SAVE ON POSTAGE. WHEN POSSIBLE, I WILL COMBINE TO FIT INTO A FLAT RATE BOX TO SAVE YOU ON POSTAGE. I SHIP WORLDWIDE. BUT YOU MUST PAY WITH PAYPAL. I PROMISE TO PACK VERY CAREFULLY AND HAVE A VERY GOOD TRACK RECORD OF ITEMS ARRIVING SAFELY AND PROMPTLY. I TRY HARD TO SEE THAT YOU GET YOUR WINNING ITEMS AS QUICKLY AND SAFELY AS POSSIBLE. HONEST DESCRIPTIONS! THIRTY DAY RETURN-FOR ANY REASON! MINUS POSTAGE FEES. Please click on the"ME" icon next to my name and feedback rating to learn more about this seller! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%
zipedit] CELT MEADE CO KENTUCKY A really nice and very well crafted authentic Native American Indian artifact. It is made from a beautiful speckled material. It is no brainer authentic and will paper with anyone you choose if you deem nessessary. It has excellent bit use polish. There is no modern damage. Please do not be afraid to make a reasonable offer on any of my items as i really do want to sell this stuff! This is a collector grade artifact is guaranteed to paper with any quality authenticator or your money back. Size: 3.31 inches long. TERMS. All artifacts are guaranteed authentic unless otherwise stated in the title or description. All items will be well packaged and shipped promptly to the address on your pay pal account unless prior arrangements are made. My return policy is 14 days. However arrangements can be made in advance ... moreto offer more time for Authentication. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-140408a8377-0x104-
Nice dental implant tools. Left by previous oral surgeon, unknown brand
AMP 69710-1 TYEO CRIMP TOOL W/10-12 AMP 90349-1& 2 HANDLE EXTENSIONS ARE WELDED ON TOOL HANDLE IS 15" LONG MCID 54244 HI.AK,PR subject to FREIGHT surcharge 0713 Check out my! Any Questions Call or email or Stop In We accept Paypal and Wire Transfers Have a Blessed Day! Paul Open Monday- Friday 8-5 Paul Sullivan METRO CAD. INC. 2277 49th Avenue North Minneapolis. Minnesota 55430 USA 612-302-8056 612-302-7672 fax Used Equipment Sales New Equipment Sales KILOTECH Scales EZ Maintenance PM& Calibration Software Job Master Manufacturing Software Rigging. Moving, Storage and Archival Sold"as is. Where is" Cost for Packaging and shipping are the buyers responsibility. Shipping Please call or Email S&H and Crating Fees will apply Additional fees for outside the US shipment. Notice: Some items offered for sale are restricted ... morefrom shipment to an ultimate destination outside of the United States. By U.S. Law. All sales of these"Restricted Technology" items are intended for ultimate destination only within the U.S. and it is the sole responsibility of the buyer to obtain proper licenses, where required, and if allowed, by U.S. law. Warranties While descriptions are believed to be accurate. The sellers make no warranties or guarantees, expressed or implied, as to the genuineness, authenticity of, or defect of any item(s) being sold and will not be held responsible for any advertising discrepancies or inaccuracies, including without limitation any pictures, descriptions or other information relating to the assets as contained on the website metro-cad or other communications electronic or otherwise. All items are sold on an"AS-IS" WHERE IS" AND"WITH ALL FAULTS" basis. THE SELLER MAKES NO WARRANTIES OF ANY KIND. EXPRESS OR IMPLIED AS TO THE NATURE, QUALITY, and VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BUYER AGREES TH
Waldom W-HTR-1719-C Crimp Tool Condition: Used. In good working condition. As pictured. Additional Notes: For 0.062" terminals; 18-24AWG Additional Terms: Sorry. We do not export outside the USA. All electronic payments(Paypal/credit card) MUST have a domestic billing address. In-store pickups are happily encouraged during regular store hours. Cutting out shipping charges. While appointments are not necessary, you can expedite by informing us your intention to pick the item up. All sales shipped in Florida are subject to 7.0% sales tax. Unless there is a“Buy it Now” option. We do not end auctions early. En Español) Términos Adicionales: Disculpen. Pero nuestra compañía no exporta fuera de los Estados Unidos. Todos los pagos electrónicos(Paypal/ Tarjeta de Crédito) DEBEN tener una dirección de pagos ... moredomestica. Alentamos si quiere recoger sus productos en nuestro negocio; durante horas regulares de trabajo. Esto le salvara costos de envió. Mientras que citas no son necesarias. Usted puede apurar su recojo de productos, simplemente informándonos su intención de recoger sus productos en nuestro negocio con anticipacion. Todas las ventas enviadas por correo en el Estado de la Florida son sujetas a 7.0% impuesto de venta. A no ser que usted vea el anuncio“ Buy it Now” Comprar ahora’ Nosotros no terminamos las subastas temprano. Skycraft Parts& Surplus. Inc. 2245 W. Fairbanks Ave. Winter Park. FL 32789 Phone: 321) 972-8357 Fax: 321) 972-8358 Specializing in surplus electronic components and parts for over 30 years! Powered by The free listing tool. List your items fast and easy and manage your active items.
This auction lot is for 6 excellent used condition wise-grip clamps and toggle clamps. What you see are the actual photos. Shipping is only $9.50 with in US. Please check out my other auction items for more aircraft tools. Special saving for US buyers only. The more you buy. The more you will save on shipping. Any additional items you buy will be shipping free. You just have to pay for the highest single item shipping fee. For example, You have bought 3 items from me, the shipping cost for each item is $3.00, $3.50, $4.00. I wil only charge you $4.00 for all 3 items. What a great deal! Powered by On Mar-04-06 at 12:37:48 PST. Seller added the following information: Posted with the.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1404091fd8b-0xfb-
WE SELL SYNTHES ITEMS 40%60% OFF WE HAVE FROM SCREWS.PLATES,BITS,CASES,TOOLS, AND MORE! This sale is for Synthes REF 360.265 Handle for Protection Sleeves 60% OFF List Price(Not in original packaging) REF# 360.265 ss MO RE PRODUCTS available AT: http:stores.ebay.com/2Geminiwsale amp; 2 Gemini Inc. is a wholesale liquidation company dealing in surplus surgical. Medical, and collectible products. 2 Gemini Inc. P.O. Box 840, Clearwater, FL, 33757, Contact us@ 727-803-0716 or Email us@ geminiwsale@aol.com PAYMENT POLICY: We accept PAYPAL only. INTERNATIONAL SHIPPING: Please email us for rates and shipping time: geminiwsale@aol.com· Buyers are responsible for all customs charges inclusive of any and all taxes and duties. Please be sure that the item that you are purchasing can be imported into your country. Shipper is not responsible for ... moreany delays once the package leaves our facility. Attention EBAY staff: These items do not require a prescription and meets all current requirements for listing. DISCLAIMER: The item is in its original condition and no alterations have been made to the item. The item has been properly stored and handled. Following the manufacturers recommendations. The item comes with the accessories specifically mentioned in the description or shown in the pictures. This item is not a food or medical product that has expired. This item does not appear to be damaged or mishandled. To the best of seller’s knowledge the item has not been recalled. ALL SALES ARE FINAL. Orthopedic hand pieces are in working condition. However are not deemed to be patient-ready and may require minor maintenance– buyer assumes this responsibility(please see our exemplary feedback) FDA REGULATION AND CERTIFICATION: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as
Wb shipped parcel or priority with NO additional handling or other charges! These vintage Jensen NOAA weather radios are AMAZING- I was really surprised when I looked it up that there wasn't a bigger following for em(as. Say, some Sony models with similar features) This baby would be REALLY helpful to have in a weather or survival type environment. Up front, there IS a problem with it- nothing that alters the performance of any of the features but bears mentioning: the battery cover is supposed to have a locking latch that has broken off- Jensen evidently made it out of PLASTIC instead of metal, and well over time you know what happens to the plastic stuff. At any rate, EVERYTHING works on it and I would keep it if I did enough camping and such to justify doing so. I've had it for some years and has been my personal radio. It's ... morereally a veritable swiss army knife of a weather radio, just unfortunately there isn't a collector's following for them like some other brands(and mine has the battery cover issue that's an issue) Serial number 20050618263. Here's some of the many cool things it does: it has all hazards emergency monitor you can set date. Time, etc it has an alarm with the clock and I believe(not positive) that the alarm can be made to alert you if there is a weather related emergency message as well it records temperature- the above and this feature I haven't used. But when I put the batts in(I NEVER store battery powered devices with batteries inside- this one takes 4 C sized batts which although not new I'll certainly INCLUDE) it had a recorded record temp that came up as well, so I think it will somewhat keep track of temp readings- at least record highs and lows- but don't quote me on that! it has nice rubber buttons to control power. Display, messages(weather text type ones I think) you can set city and county presets(so if you do your camping in various areas, you can have the particular bands already pre-set for those areas) set button, etc has am/fm tuner an
thank you for taking the time to look at my products.i will always be honest and reliable. all parcel is free shipping by hongkong post.if you have any questions please contact us. we strive for excellence. Total length: 140MM.Width12MM,weight 40gram. payment: 1.We recommend paypal Service. 2.credit card.Moneybookers is ok. friendly tips: 1.thank you visit my ebay. 2.you are at least 18 years of age. 3.any problem free contact us. Very happy do something for you! 4.if the item is forbiden in your country.State,city,please don't buy.
You are bidding on a like new Kato# CT16003-3 tangless installation tool for 10/32 helicoils in the box with everything that came with it.
This lot consists of a Hilti brand Powder Actuated Tool. Model number DX36M, with the original manual, case, extra piston, cleaning tools and two"hilti" cleaning rags, 9 red cartridges, 4 yellow(medium) bumper, and lubricated spray. I'm not the original owner of this unit, so I don't know the history of use. Appears to have been used, but they're is no evidence of any major wear. Condition appears to be GOOD to VERY GOOD with some minor wear and evidence of use, some grease evident on both the tool and the case, but nothing that can't be cleaned. I ALSO HAVE SOME NAILS AND RED CARTRIDGE STRIPS FOR SALE SEPARATELY, COMBINE AND POSSIBLY SAVE ON SHIPPING COSTS. Shipping costs includes Insurance coverage. California residents without resale numbers MUST pay 8 1/4% sales tax. Money back guarantee(minus any shipping charges) ... moreif item is not as advertised above. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14040a44a66-0x104-
Up for auction is a Very Nice! pre-owned"Duo-Fast(DF-27) Power Actuated Tool" This Tool was acquired previously owned at our store and is in good working condition. The DF-27 is a.27 caliber which will fire 3. 4 and 5 loads. As noted, the tool is solid and weighs 4.5 lbs with an overall length of 15.44″ You can fire up to 3″ pins. This tool is great for fastening metal or wood to concrete. The DF-27 powder actuated gun is very similar to Remington guns on the market which are a nice step up from the really cheap versions that must be hit with a hammer to set off the charge. Having the semi-automatic feature for the shot loads is a must have when it comes to convenience and speed of use. Only what is pictured is what is on auction. If it is not in the pictures. Then it does not come with the auction. Buy With Confidence! Please take ... morea moment to read our auction policies: Customer Service Policies If you cannot complete the payment transaction please do not bid on the item. Items have a three(3) day from confirmed receipt of goods return policy unless otherwise stated. This means you have three(3) days from confirmed receipt(FedEx or USPS time stamp) to let us know you are not happy! We will not- under any circumstance- honor our return policy if it is stated in the item description that the item is being sold"as is" No exceptions to this policy will be considered. Our return policy will also not be honored in instances of"Buyer's remorse" The return policy will. However, be gladly honored if the item is not as described. We do our best to describe every item accurately, but have been known to make mistakes! We will be more than happy to leave feedback after a Buyer’s feedback has been posted. Office Hours are between 10 a.m. and 6 p.m. Mountain Time(Phoenix. Arizona) Monday through Friday(excluding major Holidays) email is checked frequently. Response time almost always occurs within 24 hours(excluding most Holidays and weekends) Please be patient. As some of your questions may ta
Model number DX-A41 with X-AM72 Magazine. Powder- actuated semi automatic fastening tool. Depth dial, complete some shots and nails included. Posted with
RAMSET RED HEAD MD380 SINGLE SHOT POWDER ACTUATED STUD NAIL GUN NAILER FASTENING TOOL. 15LBS. EXCELLENT WORKING CONDITION. NO PERSONAL MARKINGS/ ENGRAVINGS. ACTUAL PHOTO. WHAT YOU SEE IS WHAT YOU GET! Powered by The free listing tool. List your items fast and easy and manage your active items.
Beautiful. Hand carved, natural wood tribal artifact. This simple but effective tool, carved from what is most likely teak wood due to its color and weight, is thrust into the mud to make the hole for planting a young rice shoot. The figure at the top is stylized and the proportions of the head and lips exaggerated, idem the hands and feet. The lizard, probably a gecko, symbolizes fertility. The tool is quite resistant, with sturdy and quite thick wood. Both figure and stake are in fine condition. Can be used for killing vampires in a pinch. Item is sold with the black metal stand. The total height of the wooden tool from top of the head to the tip of the tapered end is 18.5 inches/47 cm. The figure alone is 5.5 inches/14 cm. The height of the metal stand is 15.75 inches/41 cm. Tool and stand together stand 22.5 inches/57 cm. The depth of ... morethe figure at its deepest is just about 2 inches/5 cm. Don't hesitate to ask questions if any arise. Location of the item is Chiang Mai. Thailand. Shipping will be by Economy International and averages 14 to 21 days. Cost is determined by the weight of the item. I don't make money on the shipping. After the 15% taken by paypal and ebay the shipping charge rarely covers the whole shipping expense. For this reason. I usually do not offer combined shipping as my cost per item does not decrease with more items. Returns are accepted within 14 days of the consignment with the item undamaged and in it's original shipping state. Return shipping expenses are the obligation of the consignee. However, the item can be returned to a US address provided at the time of the return.The consignee will be contacted if the item cannot be accepted because it does not conform to the above reported conditions. In this case, the consignee will have the opportunity to have the item resent at the consignee's expense. In the case that this shipment is refused, the seller reserves the right to keep the item and corresponding monies.
I don't know much about this item. All I do know is it was made in America and the bulb still lights. It takes two C batteries. Not included. See photos for conditon.
Works Perfect! Standard Pneumatic. A division of JDV Products, features the SP 6021 Electric Wire Wrap Gun designed to wrap wire sizes 18 to 32 AWG. The lightweight Lexan housing of this wire wrapping tool, as well as its ergonimic design will reduce worker injury associated with repetitive motion. The Standard Pneumatic 6021 wire wrap gun is equipped with a high speed 4000 rpm electric motor, positive indexing mechanism, a geared drive and 20 foot power cord. Shipping is for delivery in the USA only.
Retro Multi-Tool Swiss Army Utility Pocket Knife w/ Leather Pouch in Original Box For your consideration is this Victorinox Swiss Army Multi-tool utility pocket knife. Making vintage originals since 1884. this one is cira. 1970) this Swiss Army knife has three tools: a 1 5/8" stainless steel pocket knife blade; mini-scissors/tweezers combo; and combo screwdriver/nail file. In addition, there's a storage slot for a plastic toothpaste on the outside of the case and a key ring on top. Not as many features as some Swis Army Combo pocket knives. but not $40 to $60 either! The Gas Company" logo is silk-screened on one side sheathed. Royal blue hard plastic casing. All blades in excellent condition. Appears that this was not used at all but still'pre-owned price' with a low opening bid of just $9.95(or B-I-N at $12.95) Shipping: ... moreUSPS First Class Mail Insured within the US& all US Territories: $5.95 USPS First Class Mail to Canada: $ 10.95 USPS Priority Insured Mail to Mexico. Europe& Australia: $25.95 USPS Priority Insured Mail to South America. Asia& other Pacific Rim countries: $27.95 Notes: 1) Due to an increase in delivery times. Missing shipments and a general lack of tracking cooperation from foreign postal authorities due to short-staffed customs department. WristRock now has been forced to suspend shipments to certain countries. Please consult our exclusion list prior to bidding. We are sorry for the inconvenience but we are tired of customer complaints from these countries for circumstances well beyond our control. 2) Not all countries' import regulations permit knives. It is your responsibility to check for any restrictions or duties related to importation of knives. 3) Photos are considered a part of our description. All dimensions and measurements listed are approximate. Color image of goods due to computer screen settings may be slightly different. The actual product colors prevail. By placing a bid on this auction. The bidder understands and agrees to our Terms and Con
2 vintage metal baskets/factory tool trays. Very heavy and sturdy. Measure approx. 25 inches long. 14 inches wide, and 5 inches tall to top of the handle. Payment within 2 days by U.S. PAYPAL account holders only. You must have a U.S. registered EBAY account and reside in the lower 48 UNITED STATES to purchase. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1409831ba4d-0x102-
RARE Vintage Barware Tool Rostfrei Mid Century Germany Letter Opener w/ Hidden Corkscrew. Great Patina. Twist to remove letter opener blade and find hidden corkscrew. Top of handle also is removable. Marked ROSTFREI DBP 887711. Great piece, from a clean and smoke free estate home. Measures 8" long. Lost and Found Antiques& Collectibles accepts Pay Pal Payments. Please view all photos prior to bidding and we will gladly answer any questions. Shipment within 1 business day of receipt of payment. Payment expected at time of bid or within 24 hours for best offers. Please contact us if you will need longer than this to make your payment. Items are wrapped securely and packaged well to help insure safe delivery to you. Shipment via US Postal Service, the rates we show with our listing are for the United States. Check out our store we are ... moreglad to combo ship to help save on postage. International buyers are welcome. You can ask for shipping rate prior to bidding, we ship First Class International Rate when available unless you ask for higher Priority rate or the package is too large. We try very hard to accurately describe our items, and stand behind our products so our customers can be satisfied. We are proud of our Seller rating status. Thanks for viewing and Happy Bidding! On Aug-18-13 at 02:24:32 PDT. Seller added the following information:
You are bidding on a LOT OF 2 NICE VICTORINOX FOLDING KNIFE MULTI TOOLS. YOU GET THE CLASSIC SD RED& BLUE KNIVES WITH TRADEMARK LOGO'S PICTURED. THEY ARE COMPLETE WITH THREE BLADES(KNIFE. FILE AND SCISSORS. A PULLOUT TOOTHPICK AND TWEEZERS. THEY ARE IN GOOD CONDITION BUT USED WITH THE NORMAL WEAR OF A USED KNIFE. Check out the photo attached! 94-95* Buy it now $6.99. Winning bidder to pay $2.95 shipping and handling to the USA. I offer a 100% money back guarantee if you are not happy with your item as I have described it. Let me know within 14 days. Thanks for looking and bidding on my auction items. Powered by The free listing tool. List your items fast and easy and manage your active items.
For your consideration here is: Leatherman SuperTool 200"Retired collectible" WITH BALLISTIC CASE. Condition: Excellent used condition. Barely used. Due to the fact that my items are second hand and from the local thrift shops. I do my very best to describe my items to the best of my ability. Please look closely at the pictures to complete your assessment. If you should be truly unhappy with your purchase. Please contact me before you leave negative or neutral feedback and let me do my best to make things right. I am not out to rip any one off. Bid with confidence No international shipping. Combined shipping available. Just let me know if you are bidding on multiple items and I will take care of it. I am showing Parcel Select. Unless you specifically request a certain shipping service. I will compare and choose the least expensive. ... moreLocal pick up offered and free. Payment or communication in regards to payment must be received within 48 hrs of close. After 48 hours without payment or communication. I will open a non payment case and 48 hours after that, the Non Payment case will be closed and I will re list the item. In other words, I am willing to work with you but, you must communicate. All communication is strictly through eBay email/messaging. I do not check my email accounts.If you don't message me via eBay email, I will not get the message. NOTE: All Colorado Sales will be charged a 2.9% tax on the total price. Including shipping. GOD BLESS AMERICA! I do not conduct business on Sundays unless it is under special circumstances that have been worked out prior to Sunday. I will not ship packages. List items, or correspond to emails or even open the eBay website. In order to keep costs down for both of us. I typically do not include packing slips or use any packing if it is an item that wont get hurt in the mail(i.e. a pair of shoes or something of that nature) If you would like a packing slip printed or packing for non breakables, let me know. I will include either at no charge.
one of them is used and has scuff marks on it but the other two are new now box or papper work on them the siz are as flowes 1/2 3/8 and mabe 7/16 but not sure it is the used one james 928-533-6741 prescott valley az 86314
4pcs Tool wrench keychains zinc alloy description: Duantity: 4pcs Meterial: zinc alloy packing:signal OPP bag( no box) Pictures PAYMENT We accept PayPal only Attention: 1. All payments must be submitted within 3 days after the end of the auction. 2. Items unpaid within 7 days of the auction end will be forfeited. We reserve the right of cancel the order and report an unpaid dispute to EBAY. SHIPPING Your purchase will be shipped via Standard International. Which normally takes 15-45 working days to arrive. Attention: Shipping time: because you bought the item from opposite side of the earth. It needs time to ship and the duration on its way to you is out of control. What under our control is that we will ensure ship the item within certain biz days as described in item listing. Therefore. Please DON’T leave us 1, 2, 3 or 4-Detailed Seller ... moreRatings on Shipping Time and Shipping Charge which equaling to negative feedback. International Buyers– Please Note: a) Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. b) Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. RETURN 1. All products have been checked and packaged in good condition before dispatch. 2. In case the item is defective. Please inform us within 15 days of receipt, we will replace it. Please contact us before you return it. Items should be returned with original packages and accessories. Buyer is responsible for return shipping costs. If you have any questions. Please contact with me Feedback We expect to receive your positive feedback,Your positive feedback will keep us moving forward。 If you are not satisfied with our service. Please contact us to get a solution before you decide to leave a neutral or negative feedback. After all, simply leaving a negative or neutral feedback can't solve the problem. We will try our best to solve any problems for you as soon as possible, thanks.
4pcs of Tool up mace keychains zinc alloy description: Duantity: 4pcs Meterial: zinc alloy packing:signal OPP bag( no box) Pictures PAYMENT We accept PayPal only Attention: 1. All payments must be submitted within 3 days after the end of the auction. 2. Items unpaid within 7 days of the auction end will be forfeited. We reserve the right of cancel the order and report an unpaid dispute to EBAY. SHIPPING Your purchase will be shipped via Standard International. Which normally takes 15-45 working days to arrive. Attention: Shipping time: because you bought the item from opposite side of the earth. It needs time to ship and the duration on its way to you is out of control. What under our control is that we will ensure ship the item within certain biz days as described in item listing. Therefore. Please DON’T leave us 1, 2, 3 or 4-Detailed Seller ... moreRatings on Shipping Time and Shipping Charge which equaling to negative feedback. International Buyers– Please Note: a) Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. b) Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. RETURN 1. All products have been checked and packaged in good condition before dispatch. 2. In case the item is defective. Please inform us within 15 days of receipt, we will replace it. Please contact us before you return it. Items should be returned with original packages and accessories. Buyer is responsible for return shipping costs. If you have any questions. Please contact with me Feedback We expect to receive your positive feedback,Your positive feedback will keep us moving forward。 If you are not satisfied with our service. Please contact us to get a solution before you decide to leave a neutral or negative feedback. After all, simply leaving a negative or neutral feedback can't solve the problem. We will try our best to solve any problems for you as soon as possible, thanks.
YOU ARE BIDDING ON A"POWER LOCK" MULTI-TOOL- WITH- PLIERS- SOG. USA- 4 1/2" CLOSED) 18 TOOLS IN ONE) LEATHER SOG CASE INCLUDED THIS IS AN NTSA SEIZURE AND IN EXCELLENT TO LIKE NEW AND CLEAN CONDITION WITH VERY MINOR USE. THE PICTURE IS OF THE ACTUAL MULTI-TOOL. IF YOU HAVE ANY QUESTIONS ID BE HAPPY TO ANSWER THEM. I WILL SHIP WITHIN 24 HOURS OF PAYMENT. Posted with
Solingen Hammer Up for auction is a great vintage Solingen Hammer tool kit! This item comes to you in good condition with minimal areas of wear. Comes COMPLETE with all tools that hide away into the handle of the hammer. Please check out all the photos for best description of this item: Thank you so much for checking out my auction! I try to describe items the best I can- but I am not an expert on everything- feel free to email me with any questions or concerns you have. I will answer. Or try to answer, and and all questions: Check out my other auctions as well- I will combine shipping to help save you money on shipping costs. All items come from a smoke-free and pet-free home. Feedback will be left after YOU leave feedback- letting me know the transaction is complete and that you are satisfied with your purchase. Thank you& have a great ... moreday:
HELLO.EVERYONE,THIS IS A SET OF 2 MULTI TOOLS THE FIRST 1 IS A GERBER Multi-Plier 600 is the fully functional toolbox that fits in the palm of your hand. This versatile tool features all stainless steel hardware for durability and our patented one hand opening plier jaws-open with a flick of the wrist. In addition to the blunt nose jaws, the Gerber Multi- Plier 600 has ten locking components. These include, pliers, large, medium, and small screwdrivers, cross point screwdriver, lanyard ring, drop point knife blade,that is broke, serrated sheep foot knife blade that is broke also, can opener, bottle opener, file, crimper, wire cutter. All tool components lock open with our patented SAF-T PLUS locking system-the safest, strongest, most durable lock available, these suppose to have a lifetime warranty,you might be able to send it back and get ... morenew blades,the other one is a plain multitool.but it has the knife blade, Check out my! Be sure to add me to your! I COMBINE SHIPPING! NO RESERVE! PAYMENT IS EXPECTED AT END OF AUCTION. IF YOU ARE OUTSIDE THE US. PLEASE,EMAIL ME BEFORE YOU BID. IF PAYING WITH E-CHECK& IF YOU HAVE A FEEDBACK OF LESS THAN 5 PLEASE CONTACT ME BEFORE BIDDING. I work hard for your positive feedback! Please let me know if you have an issue before leaving bad feedback. Let's make this a positive eBay experience for Everyon e!
Stark Lever Tail stock. This tail stock is not marked but is believed to be and was found with Stark lathe parts. The Tail stock is not complete and in rough condition so study the photos carefully and ask questions if necessary. What is shown in the photos is what is included ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1409a75959b-0xf8-
aims HARDINGE ASM-C8 RECESSING TOOL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge Bros. This is a used Recessing Tool. Tool is missing the spring that allows the head to travel. Model# ASM-C8 Features: The recessing tool is used to perform inside recessing. Back facing, back chamfering, and outside recessing operations. The unit is adjustable in either direction from the center to allow for various bore and relief diameters. The recessing tool operates under spring pressure and has a maximum travel of 3/4" The holder has a 5/8" diameter bored hole and will accept 5/8" round shank tools. As well as HDB5 Bushings to hold tools with 1/2" and smaller shanks. Specifications: Capacity: 5/8" Shank: 5/8" Comes as shown in pictures. ... moreTo go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HARDINGE ASM-C8 RECESSING TOOL HARDINGE ASM-C8 RECESSING TOOL Reliable Tool Inc. c 2011 | Powered by 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-1409a7595a8-0x105-
Tool Holder Lathe TURNING TOOLING Carbide? 1/2 7 c NO 10 5" x 2" X 1/2 Wood Lathe Tool holder. in good condition. look at photos Don.T know what its used for holding tool of some sort. It.S about 4 x 5. Machinery Thanks for looking. IF you have any questions about shipping. Condition of the item,or want more photos et.et. please contact me BEFORE your bid not after the auction ends I accept PAYPAL as payment ONLY. Payment is due within 48 hours of auction end. Unpaid Item claims will be opened after 5 days, or if you have not made other arrangements with me. Your item will ship within 2 business days of payment. I do not ship on weekends or Holidays. All Items are shipped by The US Postal service. First Class or Priority Mail. I do offer combined shipping. Please contact me and I will give combined shipping quote. I do not offer ... morereturns on my items unless there is an error on my part. Please contact me with any problems! I am willing to work out anything! Returns will be decided on a case by case basis. If a refund is given, shipping is NOT refunded. I do my best to describe all my items accuratley. ALL ITEMS ARE SOLD"AS IS" please look at photos and description carefully before bidding. Add Thanks har22
Armstrong 83-027 Left Hand Tool Holder. In good condition. Approx 7" long and 9/16" thick. Please check my other listings for more toolholders. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-1409a75953a-0x107-
1" Shank Lathe Toolholder PN# MVJNR 16-3C Very good like new condition( includes 1 used Thread Insert) Unknown Manufacturer Free Shipping in US
Just in from school teaching is this CNC EMCO COMPACT 5. I plugged this in.110 volts) turned the key and this powered up and both digital readouts lit up. Have no way to test this any further. The back cover is missing. Comes with all you see in the pictures. This will be shipped don a pallet. Freight shipping. Thanks for viewing. Good luck and God Bless You!
Mint condition cut-off tool purchased with Craftsman 6" lathe
This is used. In excellent condition Kennametal tool holder MVUNR-204D NGO. Thanks for taking a look and please be sure to check out my other listings.
HARDINGE DRILL AND SHANK TOOL HOLDER PART NO. CC-18 5/8 Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, PayPal, and credit card accepted. $7.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
Quick change lathe tool post and tool holder made by Armstrong. High repeat-ability wedge type. Size is compatible with Aloris AXA or 100 series. Includes t-slot stud and nut. Very good. Fully functional condition. Some rust staining on uncoated surfaces.
Used- Armstrong No 1 Knurling Tool. This tool is in good working conditions.
This is the last of my lathe equipment. Live centers, KDK tool holders, lathe carbide cutters, starrett dial indicators, various chucks MT2. All in pics goes. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1409ae2345c-0xff-
This is a great condition unknown brand fly tying vise. Its welded steel with a removable bench mounting clamp. Shows very little wear at all. Great tool ready to go. Please look closely at all pictures and ask any questions before placing your bid. No international shipping. Thanks for looking. Posted with
Five Morse and Cleveland Twist Drill Company large screw extractor set. Minimal surface rust is present. Morse- No. 8-13/16 No. 6– 13/32 CTD- No. 6– 13/32 No. 5– 17/64 ST- No. 3– 5/32 Please see photos for complete condition. Condition- Item is sold as is. Shipping Info- Item(s) will be shipped within 3 business days of payment being received via standard insured shipping. Any other type of shipping must be requested by the buyer. Who is responsible for any additional costs. Will ship internationally to certain locations. Return Policy- Buyer has 14 days to email their request to return the item. Return must be verified by seller prior to return. Buyer is responsible for return shipping costs for reasons other than damage incurred during shipping or defect not specified in item description. Ka391.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1409b27e853-0xfe-
aims THREE 3/8" CAP. TOOL BIT HOLDERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 Tool Bit Holders in Good condition. Specifications: Capacities: 3/8" Shanks: 3/4" Overall Lengths: 2-3/4" 3" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. THREE 3/8" CAP. TOOL BIT HOLDERS Reliable Tool Inc. c 2011 | Powered by
Freeborn Tool Cabinet door edge detail shaper cutter. 1.25" bore.
FS Tool 4 pocket cutterhead with gib's.
Infinity tool company Cope and Pattern shaper cutter set for cabinet door rails and stiles. Model number 83-031. It is the industry standard profile for cope and stick doors. Was used and well maintained in my cabinet shop. Kept sharp. And no nicks or defects. 3/4 bore Posted with
Antique Primitive Tool made by Indigineous American Peoples. This Tool was used to make Fire. I Believe a Stick was inserted into the Circular Hole which is 1" in Dia. The Stick was rotated quickly to make it hot a perhaps be able to light Tinder. I am not an expert on Stone Tools. This is my Opinion. It has just been found in the home of an Elderly Person who collected so much, that things were floor to ceiling in the home. The person that purchased the house bought it with everything in it. The Elderly Gentleman also collected these. Bid for what you think it is. People do replicate these items. I know nothing else about this item. AS IS NO RETURNS) Photo 2 is more accurate in color and photo 1 shows more detail of the Stone.4 Pounds Shipping Weight to your area. NO INTERNATIONAL SALES)Thank you for viewing my auction. Sincerely, Jeanette
THIS IS FOR A OLD DUNCAN DRESSING WHEEL. THIS IS IN GOOD USED CONDITION. THIS IS ABOUT 11 INCHES LONG.THE TEETH LOOK GOOD AND NO PAINT LOSE. IF THIS ITEM IS NOT AS DESCRIBED YOU MAY RETURN IT WITHIN 7 DAYS FOR FULL REFUND OF WINNING BID THE SHIPPING IS NON-REFUNDABLE THE BUYER TO PAY FOR RETURN SHIPPING ANY QUESTIONS PLEASE EMAIL ME HOPE YOU HAVE A WONDERFUL DAY
Cast iron neck has"VAUGMAN& SUSHNELL Mfg. Co. Chicago" Original finish on handle. Tool is around 17 inches long. called a Shipman's Tool Yacht scraper/ paint scraper. Blade has a countour. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1409c353e79-0x101-
You are bidding on this retract-o-reel in good working order it has a 10lb limit made in chigago by Appleton electric company Good luck bidding
Stainless. 18" x 1 1/4" Kurt H. Volkswagen Inc. no 6062 Milford Connecticut 06460. Also marked Woodward Associates Inc New Bern N C copyright 1964. Nice condition Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1409c43d774-0xf5-
Check out my! THIS IS A 6 1/2 INCH LENGHT ALL STEEL FILE WORKED FANTASTIC NEEDLE VERY VERY EARLY 18TH CENTURY EVEN COULD BE 17TH CENTURY. HAS A THE HOOK ON ONE SIDE AND CUTTER FOR THE THREAD ON THE OTHER. WONDERFUL STEEL IRON WORK AND MEASURES 6 1/2 INCHES LONG. LOOK CLOSE AT THE PRIMITIVES WE HAVE LISTED. ITEM WILL NEED TO BE PAID FOR WITHIN 7 DAYS OF END OF AUCTION.UPON RECIEVING PAYMENT ITEM WILL BE SHIPPED. AFTER 25 PLUS YEARS OF DOING THIS FULL TIME WE STAND BEHIND THE ITEMS WE SELL. IF WE HAVE MADE A MISTAKE IN OUR DESCRIPITION UPON YOU RECEIVING THIS ITEM AND ARE UNHAPPY WE WILL BE GLAD TO REFUND YOUR MONEY OR GIVE YOU A FULL CREDIT. THANKS FOR LOOKING AT OUR SITE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1409c55d4be-0x101-
We sell mostly USED and UNIQUE items. Expect minor evidence of use or imperfections. Dings etc. from age. We take many photos of our items to help with the description as every detail may not be caught. Please use the photos to help judge content and condition. If you are unsure in any way please ask. Please do not bid before you are completely sure what you are bidding on. WE DO NOT MAKE PARTIAL REFUNDS. IF YOU ARE UNHAPPY WITH AN ITEM WE ACCEPT RETURNS FOR FULL REFUND OF THE PURCHASE PRICE. PLEASE DO NOT ASK FOR A"DISCOUNT" AFTER PURCHASING AN ITEM. Item Description A neat advertising piece for Carborundum abrasives. Has a stone in it. Not sure if it is original or not, is two sided and has a chip on the finer side. Metal box is about 11 by 5" and 3" tall. Some finish wear overall. 081513- OH/EO. By bidding on this auction. ... moreYou are agreeing to the following terms: Payment must be received within 10 days of auction end. Payment must be in US$. In the form of Paypal, and credit card(via paypal) PA Residents must pay PA state sales tax. This includes local pick-ups at our Enola location(It's the law) Refunds must be requested within 3 days of receipt. Return shipping responsibility of buyer. We want you to be satisfied. We gladly return feedback. For auction winners. if using paypal. Your checkout address and your confirmed paypal address must match. Please note, we do not get notes left with your paypal payment. If you have a request concerning your item, PLEASE contact us directly through ebay BEFORE payment to avoid any confusion. Please use ebay shipping calculator to get costs to your door. PLEASE NOTE: We use UPS rates to calculate for Fed-Ex rates on some larger items as ebay can not calculate Fed-Ex rates. We DO NOT ship UPS. Any service showing UPS will be shipped Fed-Ex. Shipping is combined for multiple items to save YOU money. Email me after the sale to get a combined items invoice with adjusted shipping. The system will not automatically combine the items with the correct shipp
These were made during the time of elegance and grandeur. When ladies had time to sew(that must have been long before tv and ebay! Not only will these look great in your sewing room but they will give you hours of pleasure using them. These are becoming extremely rare and hard to find. 20 x Antique Embroidery Roller Markers with easy to change. Ebony handle tool. Measurements: The length of the tool is 15cm and the oak barrel rollers vary from 2cm to 2.5cm diameter and 3cm wide. Traditionally used for transferring a pattern onto fabric before embroidery. I will include an old linen remnant to get you started. Condition is very good with still many more years of printing in them. The tool/handle has an ink roller which would normal have an ink soaked pad as part of the handle. Because it was crusty I took it off. I find it easier to apply ... morethe ink with a brush. see pics
DX30AM SERIES BENCH TOP TOOL SHEAR DX30AM-CU1 This auction is for a HRS(Hirose) assembly jig for IDC connectors. I have also included links to Digikey so you can get the datasheets and assembly instructions. I am sure anyone that is looking at this item already knows more than I do about it. I will answer any questions you may have the best I can. DX30am-CU1 Tool Shear for the DX30am-HP1 Datalink: Retails for $2400.00 SHIPPING Shipping is free in the USA ONLY. If you need international shipping please contact me before purchasing. I will get you pricing for your area. This item is heavy so I will choose the most cost effective method of shipping. Insurance will be applied to this sale.
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
This auction is for a small lot of good stuff. There are 2 squares made by Moore and Wright Sheffield England. There’s a Starrett No. 154-B adjustable parallel. A Mitutoyo carbide tipped scriber for use with a height gauge. This scriber looks unused and comes in the original box. Also included is a box clamp for use with the scriber. Finally there are 2 vintage scales, one is made by General No. 715 and the other is Starrett No. 303. CHECK MY OTHER TOOLING AUCTIONS
Gold International Machinery Corporation | 5C Collet SPIN INDEX FIXTURE Our Inventory Number: 0227-700 Technical Specifications: The spindle is hardened and ground. The spindle accuracy is 0.0004 TIR. The indexing plate is precision ground. The directly indexes in 10 degree steps. The vernier provides 1 degree increments. Product application. This indexing spin jig is used on milling machines. Grinders, and inspection equipment. Approximate Dimensions: 4" x 4" x 8" L, Approximate Weight: 13lbs, This item is in very good condition! Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical ... moreand international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone during normal business hours(9am-5pm EST) Monday through Friday at 1-800-619-GOLD. Please ask to speak with David Gold. However. We do recommend that you first send us an E-Mail with your questions.
For sale is a Sweeney Torque Multiplier. It is in good used condition and shows normal wear throughout. We took several pictures to show you exactly what you will receive and should expect. If you have any?s comments or concerns please contact us. Thanks for looking.
Description: Used Emco Maximat 7 Tool Holder Clamp Also fits Emco Compact 8 Condition: Very Good. Sold as shown Shipping: Includes professional packaging and shipping flat rate to the Continental US ONLY. I ship from Ann Arbor. Michigan 48103. I accept Paypal(preferred) Personal checks(domestic buyers only) and money orders. Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing, I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of ... moremy control) You agree to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
This auction is for a turning tool holder for a Miyano CNC lathe. This is a tool for the upprt turret and has Miyano part number 5Q78 5200. See my other auctions for other Miyano tool holders. All shipping is by USPS Medium Flat Rate Box. Shipping to US addresses is $12.95. Use the shipping calculator for all international addresses. I run an average of 200 listings per month. See my listings for: Sunnen hone tooling; Hardinge lathe parts& tooling; other machine shop tooling; outboard motor manuals; industrial fuses. BT-35& BT-40 tool holders, Famous Monsters of Filmland magazines from the 1970s’ National Lampoon magazines from the 1970’s, Mad Magazines from the 70’s and many other items. Unless otherwise noted. I will combine shipping for any of my listings. If you use Buy-It-Now you can buy the items without paying for them immediately. ... moreWhen you are done shopping. Commit to buy the items but don’t pay for them. Then request a total invoice. I will adjust the shipping charges and send out an invoice. The same applies when you win auctions for multiple items. Ask for an invoice rather than pay right away. I will adjust the shipping charges and send out an invoice. Please allow 2 days for me to respond to any questions. See my guarantee information and return policy below. Powered by The free listing tool. List your items fast and easy and manage your active items.
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 KENNAMETAL PSFL-164 INSERT SNM 43(1’x1”x6” LATHE TOOL HOLDER Carbide Insert(T1011) The listing price is for one Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 LATHE TOOL HOLDER inserts. Please read description carefully before you bid or use buy now option. However it is highly recommended that you verify compatibility with your Tool system prior to buy. This photo is a representation of the actual item you are bidding on. We are glad to answer any questions or supply additional photos if requested and an email address is provided. Please note that we are not an authorized dealer of this product. Every effort has been made to accurately describe all merchandise offered. We are not experts on the subject matter so we encourage you to independently ... moreverify fitment prior to ordering. If you purchase more than one item from us. You can save on shipping by having your items combined. We combine multiple orders if it fits in the same box and within certain weight. All items being combined must be paid for within our 3 day payment policy. Buyers are responsible for all shipping expenses. satisfaction is my highest priority. If you feel I deserve anything less than five-star feedback. Please don’t hesitate to contact me. My goal is to always provide a good product. I do the best I can to evaluate and describe appearance and working condition of each product listed. My first priority is for you to be satisfied and happy with your purchase. Before submitting any kind of neutral or negative feedback. Please contact me and I will do my best to resolve your issue. I will ship only to a confirmed PayPal address and only in Contiguous U.S. Lower 48 States)only. ALASKA. HAWAII, AND PUERTO RICO, FREE SHIPPING DOES NOT APPLY. Below is the approximate delivery time to different countries(just estimated. Not guaranteed) 2-5 working days to buyer in USA• 7-30 working days to CANADA(depends on custom) 10-30 working days
UNIMAT SL1000/ DB200 LATHE TOOL POST& BITS Brand Unimat Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Each cart has been carefully inspected and cleaned. May show slight wear as they have been used but no major cracks gouges etc. They only have what would be considerd normal wear. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-1409d3fab61-0xfe-
UP FOR YOUR CONSIDERATION IS: Vintage Atlas? Rocker Lantern lathe Tool Holder Post Logan South Bend Machinist. PURCHASED AT AN ESTATE SALE. Post is 2" slot width is 5/8" base is 1 3/4" x 1 3/4" NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
UP FOR YOUR CONSIDERATION IS: JH WILLIAMS#11K KNURLING Tool Holder MACHINIST TURNING TOOL. PURCHASED AT AN ESTATE 6" LONG. NICE NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
UP FOR YOUR CONSIDERATION IS: FAMOUS NO NAME TOOL BLOCK HOLDER SOUTH BEND ATLAS LOGAN METAL LATHE MACHINIST. FREE SHIPPING" PURCHASED AT AN ESTATE SALE. Block is 2 1/2" x 2 1/2" x 1 3/4" tall Cutter bit width 3/8" SHOP MADE"SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
OLDER APT MULTI-TOOL SERIES"E" SET. GREAT FOR ROUGHING LARGE HOLES IN A BRIDGEPORT. BLADES ARE USED AND IN SOME CASES UNDERSIZED. INCLUDES 1 INCH HOLDER CUT DOWN TO 3/4 FOR BRIDGEPORT, INCLUDES 2 AND 2-1/2 PILOTS, A 1 INCH SHORT DRILL, AND ALSO A BRAND NEW 1 INCH TAPER LENGTH DRILL THAT YOU CAN CUTDOWN TO 3/4 FOR YOUR BRIDGEPORT. LOOK IT UP ON MSC, OR GOOGLE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-1409d91f41f-0xf2-
Used but still works great This is a sim copier that copies contacts from one thing to another it works for iDEN sim cards. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1409e386caf-0xff-
Description: BK PRECISION 369 CLAMP METER Inputs.2- 700A RMS 1000A Peak 10 HZ- 2 K HZ 600 AC DC VOLTS Very clean face VGC with little use! I'm retired and this is not needed anymore. Leads are not included with meter! Comes with case w/belt loop and compartment for leads. Check out my other items! Be sure to add me to your favorites list! Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Item for sale is a: Vintage Tribal Cannibal Fork Hand Carved Wood Tiki Spiked Tool For serving Humans to Humans Very Collectible Good Pre Owned Condition as seen in pictures NR!
This has certainly been used and looks it. It is still pretty cool and functional. It's approx 18 1/2 x 6 3/4 x 6 3/4 inches. The sockets have certainly been used and look it. The tools and the box are not shiny new and certainly show lots of use. If you're looking for shiny new then you need to go to the hardware store. Thanks for looking and any questions please ask!
Lot of 4-Sony PlayStation 2 40 GB HDD-KIT HDD-KIT for Development Tool DTL-H10030 40 GB HDD DTL-H20400 Includes 40 GB HDD. NO Power Cords Adapters& Manual No Software. No PC card Payment: PayPal is the only method of payment we accept at this time. Payment must be received within 72 hours of the close of the auction Shipping: Typically items will ship within 1 business days from the day the payment clears. We only ship to the continental United States. WE DO NOT SHIP INTERNATIONALLY. We only ship to CONFIRMED Addresses. ComputerCorps has partnered with UPS and USPS to deliver our packages. Call regarding overnight orders. Please specify if the item is being shipped to a Business or Residential Address at the time when you make payment. All auctions items are carefully packaged and clearly labeled for shipping Refunds& Returns: All ... moreitems are sold AS-IS unless otherwise stated in the auction. IF YOU PURCHASED AN ITEM AND HAVE ANY ISSUES. PLEASE DO NOT FILE A DISPUTE OR LEAVE NEGATIVE FEEDBACK BEFORE CONTACTING US FIRST. WE GUARANTEE A RESPONSE TO YOUR EMAIL OR PHONE CALL WITHIN 24 HOURS. PLEASE CALL 775-883-2323 BETWEEN THE HOURS OF 9AM-4PM PST TIME, ASK FOR THE EBAY MANAGER. THANK YOU FOR YOUR COOPERATION. Contact Us: Contact Phone: 775-883-2323 M-F 9 am to 4 pm Pacific time. Please note: On Saturday. Sundays and evenings responses are limited. Visit My eBay Store: ComputerCorps
WELCOME- JUST A FEW THINGS BEFORE DESCRIPTION- PLEASE NOTE THAT NOT ALL ITEMS COME FROM A SMOKE FREE ENVIROMENT. PLEASE READ DESCRIPTION CAREFULLY AND ASK QUESTIONS BEFORE BIDDING, PLEASE CONTACT ME WITH ANY PROBLEM.YOUR TRACKING NUMBER WILL BE AVAILABLE IN YOUR ORDER DETAILS, ONCE LABEL IS CREATED, WE CHARGE 1.00 FOR SHIPPING MATERIALS(INCLUDED IN YOUR SHIPPING CHARGES) THANKS AND HAPPY BIDDING- WE DO COMBINE SHIPPING BY WEIGHT ALL AUCTION WINS WILL BE COMBINED BY WEIGHT FOR SHIPPING THANKS FOR LOOKING. AND WATCH FOR NEW LISTINGS EBAY AUTOMATICALY SENDS INVOICES WHEN A AUCTION IS WON. IF YOU ARE BUYING MORE THAN ONE ITEM PLEASE IGNORE INVOICE AND CONTACT ME FOR TOTAL.ONCE YOU PAY YOUR ITEM IS PACKED AND SHIPPED WITH THE CARRIER YOU HAVE PAYED FOR. IF YOU WANT YOUR ITEMS SENT PRIORITY MAIL PLEASE ASK IF NOT OFFERED. MEDIA MAIL IS SUBJECT ... moreTO INSPECTION AT POST OFFICE BE AWARE OF THIS IF YOU WANT YOUR ITEM SENT THIS WAY.THANKS
Collis 73887 Cat 40 CV Coolant fed thru.75" shank dia. tool holder. Drill not included see other auctions. Condition: Excellent. No damage at all.
good used nmtb 30- DA180 collet chuck with Q/C flange Erickson USA 2-10-207-189 no collet please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used nmtb 30- DA300 collet chuck with Q/C flange Erickson USA 2-10-207-309 no collet please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1409f03df2a-0xf5-
good used nmtb 30- 1" end mill holder with Q/C flange Erickson USA 2-60-207-107 please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used 300 Kwik Switch- Acura Flex collet chuck Universal Engineering No. 80351 no collet FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
3 good used carbide insert lathe tool holders Carboloy MTGNL-32-6 MTFNR-32-6 MTGNR-32-6 shank is approx 2" W x 1 1/2" tall x 13" long all hold a big TNMG insert please check my other auctions and happy bidding! will ship for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-1409f03e17c-0x100-