1 Drive Impact Wrench 1 Impact Wrench 1 Inch Impact 1/2 Air Drill 16 Gauge Air Nailer 16 Gauge Stapler 3/4 Impact Wrench 90 Degree Drill 90 Drill Air Hose Reel 50 Air Impact Wrench 3 8 Air Nailers Air Needle Scaler Air Rivet Gun Air Rivet Tool Air Riveter Air Screwdriver Air Stapler Air Tool Accessory Kit Aircraft Gun Aircraft Rivets Aro Air Tools Aro Grinder Atlas Copco Air Tools Atlas Copco Drill Atlas Copco Pneumatic Bostitch Floor Nailer Bostitch Floor Stapler Bostitch Framing Bostitch Stapler Bucking Bar Cherry Max Chicago Pneumatic Gun Chicago Pneumatic Impact Wrench Chicago Pneumatic Rivet Clecos Coil Nailer Compression Riveter Crown Stapler Desoutter Dotco Air Tools Dotco Grinder Duo Fast Stapler Dynabrade Grinder Finish Stapler Floor Nailer Floor Stapler Flooring Nailer Flooring Stapler Frame Nailer Framing Air Nailers Framing Nailer Goodyear Air Hose Hardwood Floor Tools Hitachi Hitachi Framing Nailer Hitachi Nailer Huck 352 Huck Rivet Gun Impact Wrench 1 Inch Ingersoll Rand 1 Impact Ingersoll Rand Drill Ingersoll Rand Impact Wrench Inline Oiler Matco Impact Wrench Nail Gun Nails Nailer Nutrunner Palm Drill Palm Nailer Pneumatic Air Tools Pneumatic Chipping Hammer Pneumatic Drill Pneumatic Driver Pneumatic Grinder Pneumatic Rivet Gun Pneumatic Torque Wrench Pneumatic Wrench Pop Riveter Right Angle Die Grinder Rivet Bucking Bar Rivet Buster Rivet Set Rivet Set Tool Rivet Shaver Rivet Squeeze Rivet Squeezer Riveter Senco Senco Nailer Senco Pw Shear Wrench Siding Nailer Sioux Air Drill Sioux Air Tools Sioux Drill Sioux Grinder Sioux Tool Tool Uryu
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
195
Buy It Now
$8.75 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
299.99
Buy It Now
$14 Shipping
Condition: New – Open box
Location: Naperville,IL,USA
$
199.99
Buy It Now
$10 Shipping
Condition: Used
Location: Jacksonville,FL,USA
$
349.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Lombard,IL,USA
$
129
Buy It Now
Free Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
125
Buy It Now
$0 Shipping
Condition: Used
Location: Wheeling,IL,USA
$
29.99
Buy It Now
$11.5 Shipping
Condition: Used
Location: Farwell,MI,USA
$
799.99
Buy It Now
$15.88 Shipping
Condition: New – Open box
Location: San Antonio,TX,USA
$
74.99
Buy It Now
$0 Shipping
Condition: Used
Location: Detroit,MI,USA
$
199.99
Buy It Now
$0 Shipping
Condition: Used
Location: Hubbard,TX,USA
$
49.99
Buy It Now
$0 Shipping
Condition: Used
Location: Lawrenceville,GA,USA
$
39.99
Buy It Now
$0 Shipping
Condition: Used
Location: Scottsburg,IN,USA
$
96.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
6.99
Buy It Now
$2.99 Shipping
Condition: New – Open box
Location: Des Moines,IA,USA
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: Compton,CA,USA
$
449.95
Buy It Now
$0 Shipping
Condition: Used
Location: Redford,MI,USA
$
99.99
Buy It Now
$0 Shipping
Condition: Used
Location: Detroit,MI,USA
$
2,999.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
Atlas Copco NEW OLD STOCK Atlas Copco 1/2" Angle Pneumatic Nutrunner Model LTV39-2 R70-13 Drive 1/2" Reversible Min Torque 26 Ft. Lb. Max Torque ... more51 Ft. Lb. Max Free Speed 350 RPM Air Inlet Thread 1/4" NPT Comes as Pictured MY TERMS AND CONDITIONS: If shipping to CANADA contact me for a SHIPPING QUOTE! I will need PAYMENT in SEVEN DAYS! QUESTIONS? Contact me with the ASK THE SELLER A QUESTION Button Powered by The free listing tool. List your items fast and easy and manage your active items.
$
111.75
Buy It Now
$0 Shipping
Condition: Used
Location: Naperville,IL,USA
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
99.99
Buy It Now
$0 Shipping
Condition: Used
Location: Decatur,AL,USA
$
39.5
Buy It Now
$6.99 Shipping
Condition: Used
Location: Bullhead City,AZ,USA
$
189.99
Buy It Now
$0 Shipping
Condition: Used
Location: Scottsburg,IN,USA
$
50
1d 6h 39m 47s
0 bids
Free Shipping
Condition: Used
Location: Saint Louis,MI,USA
$
265
Buy It Now
Free Shipping
Condition: Used
Location: Acworth,GA,USA
$
297.5
Buy It Now
$0 Shipping
Condition: Used
Location: Palmer,TX,USA
$
48
Buy It Now
$8 Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
275
Buy It Now
Free Shipping
Condition: New – Open box
Location: Acworth,GA,USA
$
85
Buy It Now
$9.5 Shipping
Condition: Used
Location: Methuen,MA,USA
Up for auction is a Atlas Copco hydraulic impulse nutrunner. This item does have some cosmetic issues including paint missing and scratches from heavy ... moreuse. This tool is in working condition. The square drive in is 1/2 inch and the bolt size is 12mm. This is an ErgoPulse Non shut-off type. Its the pistol grip style. Only comes with what is seen in the picture. Below is more information. Technical Specifications: Accuracy Drive Type Free Speed 4500 RPM Increments Length In Length 178 mm Max Air Consumption Air Inlet(NPT) Min Torque 48 ft lb Max Torque 81 ft lb Min Torque in lb Max Torque in lb Min Torque in oz Max Torque in oz Min Torque kgf cm Max Torque kgf cm Capacity lbs Min Reach in Max Reach in Min Torque 65 Nm Max Torque 110 Nm Maximum Reach In Maximum Reach mm Power Source Battery Model Reach Shank Size Sound Level Style Pistol Grip Clutch Type Non Shut Off Trigger Type Vertical Travel Ft Vertical Travel mm Weight 3.5 lb Dimensions Diameter Square Drive 1/2 Manufacturer Atlas Copco Bolt Size(mm) M12 Direction Impact Per Minute Min Torque(mf Cm) Max Torque(mf Cm) Head Width(In) Head Depth(In) Drive Size(In) Graduations(In Lb) Graduations(Ft Lb) Graduations(In Oz) Graduations(mKg) Graduations(cmKg) Graduations(Nm) Current(V) Electric Charge(Ah) Charge Time(min) Min Rated Capacity(Ft Lb) Max Rated Capacity(Ft Lb) Min Rated Capacity(Nm) Max Rated Capacity(Nm) Drive(Ø) Min Rated Capacity(In Lb) Max Rated Capacity(In Lb) Max Rated Capacity(Ncm) Min Rated Capacity(Ncm) Input Drive(In) Output Drive(In) Min Torque Ncm Max Torque Ncm Weight lbs Weight kg Max Free Speed 4500 rpm I am beginning with a low starting price compared to what these Atlas Copco nutrunners are selling for. Please contact me if you have any questions. Thanks a lot for looking!
$
84.99
Buy It Now
Free Shipping
Condition: Used
Location: Clare,MI,USA
$
1,800
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Curryville,MO,USA
$
395
Buy It Now
$13 Shipping
Condition: Used
Location: Beltsville,MD,USA
$
68.88
Buy It Now
$0 Shipping
Condition: Used
Location: Cressona,PA,USA
$
125
Buy It Now
$0 Shipping
Condition: New – Open box
Location: India
$
699.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Morton,IL,USA
$
29.99
Buy It Now
Free Shipping
Condition: Used
Location: Kawkawlin,MI,USA
ALL ITEMS START AT $3.99. CHECK OUT OUR OTHER AUCTIONS Inventory Number: 04140861813 Manufacturer: Description: ATLAS COPCO LUM25 PR14-P PNEUMATIC 1/4" ... moreREVERSIBLE SCREWDRIVER. 1/4" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, WORKS WHEN AIR IS APPLIED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice& prepaid with paypal. Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of
$
90
Buy It Now
Free Shipping
Condition: Used
Location: Lorain,OH,USA
$
29.99
Buy It Now
Free Shipping
Condition: Used
Location: Kawkawlin,MI,USA
$
75
Buy It Now
Free Shipping
Condition: Used
Location: Elkin,NC,USA
$
195.88
Buy It Now
$0 Shipping
Condition: Used
Location: Delta,OH,USA
$
55
Buy It Now
$0 Shipping
Condition: Used
Location: Orlando,FL,USA
$
1,100.99
Buy It Now
$0 Shipping
Condition: Used
Location: Middlebury,IN,USA
$
50
Buy It Now
Free Shipping
Condition: Used
Location: North Freedom,WI,USA
$
195
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Novi,MI,USA
$
21.5
Buy It Now
$13.99 Shipping
Condition: Used
Location: Middlebury,IN,USA
$
39.99
Buy It Now
Free Shipping
Condition: Used
Location: Kawkawlin,MI,USA
$
407.52
Buy It Now
$12 Shipping
Condition: Seller refurbished
Location: Detroit,MI,USA
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
1,200
Buy It Now
Free Shipping
Condition: New
Location: Westfield,NC,USA
$
254.99
Buy It Now
$0 Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
34.99
Buy It Now
Free Shipping
Condition: Used
Location: Kawkawlin,MI,USA
$
317
Buy It Now
Free Shipping
Condition: Used
Location: Evart,MI,USA
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Kawkawlin,MI,USA
$
775
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Curryville,MO,USA
$
99.99
Buy It Now
$0 Shipping
Condition: Used
Location: Rochester,NY,USA
$
763.75
Buy It Now
$12 Shipping
Condition: New
Location: Detroit,MI,USA
$
101.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
222.18
Buy It Now
$12 Shipping
Condition: Seller refurbished
Location: Detroit,MI,USA
$
101.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
39.95
Buy It Now
Free Shipping
Condition: Used
Location: West Liberty,IA,USA
1 2 3 4 5 6
 In 

Past Items  
 
ATLAS COPCO DEMOLITION JACKHAMMER JACK HAMMER 60 LBS TEX 27 PS AIR PNEUMATIC Click to View Image Album Click to View Image Album Click to View Image Album Atlas Copco TEX 27 PS jack hammer. Was in storage for a while and has use and storage marks. I have no way of testing it. Due to the spam blockers by various ISPs some of our emails get returned. If no emails are received from us or from Ebay at the end of auction. Please check your email settings and verify that you can receive emails and make sure that Your Ebay contact info. is current. Also our Ebay Contact info is current and can be optained by auction winner through the Ebay web site. SHIPPING We try to ship in a day or two upon receipt of payment. Please email if item is not received within ten days after receipt of payment. 1)All items will be shipped with UPS ground unless otherwise ... moreindicated in item description. Our zip code is 90501. for. AFTER THE AUCTION An automated end of auction email will be sent that includes all relevant auction informations. Our information and a link to a form to be filled up by the winning bidder including method of payment chosen. Response to this email is requested to facilitate processing of sale. 9.75% California sales tax applies to all California residents and must be included with payment Payments Payment I accept the following forms of payment: PayPal Shipping& Handling US Shipping. Enter ZIP Code and click button to see prices: UPS Ground International Shipping. Click button to see prices: USPS Priority Mail International USPS Priority Mail International Additional Information FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
This tool has an abnormal amount of power for its size. It has 8400 RPM. It is well balanced and reliable because of large precision bearings and an over sized output arbor. The speed also is quite well chosen. Quick grinding. This is in excellent condition. It preforms very well. It has a lot of power even with a 5HP industrial compressor. This is my favorite grinder but I have 4. I t is stronger than URYU and Atlas Copco grinders of the same size. I have even used this with a 10 inch cutof f disc cutting steel p late and it slowed down a little with the 5 HP compressor but I know if I had more air it would have continued cutting at the same speed. The on and off is controlled by a twisting collar on the base where if you don't turn it all the way it reduces the speed. Yokota Industrial Co. Ltd. has been a pneumatic tool manufacturer ... morehaving a slogan of"Technology and Reliability" since establishment in 1919. We are making every effort day and night to offer the products friendly to human and environment acquiring ISO9001 in February, 1999, always standing in customer's standpoint, and making a good use of abundant experiences and highly developed technologies. Yokota's main reputable products are highly accurate tightening tools. Above all. Their"System Wrenches" are appreciated so as to almost become the pronoun as the highly precise tightening tools in the automotive manufacturing industry. Other than that, their products are highly reputed in every processing and assembly plant such as the shipbuilding industry, housing, electric and machinery, the railway cars, and construction machiner y and so o n These are very expensive grinders and you will rarely see them being used outside a manufacturing facility.They are designed to handle a much greater work schedule than the more common grinders. In one of my pictures I'm trying to show how large the front bearing is. Made in Japan. I WILL SELL TO CANADA BUT BUYER IS RESPONSIBLE FOR PROVIDING SHIPPING* Shipping is $22. 6 0 to th
This Atlas Copco EP14 Series Pneumatic Pistol Grip Pulse Nutrunner is in good used condition and is GUARANTEED to work! Please check out my other items listed. Everything you see is GUARANTEED to work and comes with a 14 day warranty. If you don't see the item you're looking for. Please send me an e-mail with what it is you're looking for and I will do my best to find it. I have access to a wide range of DC electric and pneumatic torque tools as well as controllers and cables. The manufacturers are Atlas Copco, GSE/CP TechMotive, Cooper/Cleco/Gardner Denver/DGD, Ingersoll Rand, Stanley, Aimco/Uryu and more. Thank you for looking! Tested Tools
Inventory Number: 12090045079 Manufacturer: Description: 2 ATLAS COPCO 1/4" HEX PNEUMATIC REVERSIBLE. ADJUSTABLE TORQUE SCREW GUNS Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 2, TESTED, WORK FINE, 1/4" NPT, RPM UNKNOWN, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it ... moreremoved. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item
Atlas-Copco LMP51PH0005-25 1" Pneumatic Impact Wrench/Torque Gun 55 RPM THESE TORQUE GUNS ARE WORN. BUT DO NOT APPEAR TO BE DAMAGED OTHER THAN COSMETICALLY. THE DATA TAG ON ONE OF THESE UNITS IS TOO WORN TO READ, BUT WE BELIEVE IT TO BE THE SAME MODEL AS THE OTHERS. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LMP51PH0005-25 OVERALL DIMENSIONS: WIDTH: 2.375" LENGTH: 2.5" HEIGHT: 8.25" SHIPPING WEIGHT: 20 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING ... moreCOSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED
4 atlas copco 1/4 hex lum21 LUM25 air pneumatic power screwdriver tool lot used Lum21HR 12U no. A264032 1200r/min lum 25 hr08 u/8 no b282011 800r/min. Cant read model of next one but it is 800 r/min. Last one tag is missing. YOUR BUYING ALL FOUR OF THEM. A17 location FREE SHIPPING IN US ONLY possibly may have engraving and or tape on it from a working manufacturing facility. Used working condtion buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call with your question 815 848 2844 lots of tools to sell so keep watching
Atlas Copco LTV26 S009-10 6.3 bar 90PSI 900CAN6T PNEUMATIC NUTRUNNER 3/8 drive air tool A4 shelf location used tested working condtion buying as is since it is used ask any questions you need too before buying thanks John 815 848 2844 lots of tools to sell so keep watching
Atlas Copco LTV26 S009-10 6.3 bar 90PSPNEUMATIC NUTRUNNER 3/8 drive air tool A4 shelf location used tested working condtion buying as is since it is used ask any questions you need too before buying thanks John 815 848 2844 lots of tools to sell so keep watching
Inventory Number: 12090045061 Manufacturer: Description: 2 ATLAS COPCO PNEUMATIC SCREW GUNS. 1/4" HEX, REVERSIBLE, ADJUSTABLE TORQ Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 2, TESTED, WORK FINE, RPM UNKNOWN, 1/4" NPT,AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. ... moreWe do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item
ATLAS COPCO-PNEUMATIC NUTRUNNER- ADJUSTABLE TORQUE- LTV28 X R 15-10. 1100 RPM- 15 NM, REVERSE- 3/8" WITH EXTENSION. GOOD CONDITION, I COMBINE SHIPPING.
Inventory Number: 12090045074 Manufacturer: Description: 2 ATLAS COPCO 3/8" REVERSIBLE PNEUMATIC NUTRUNNERS. ADJUSTABLE TORQUE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 2, TESTED, WORK FINE, RPM UNKNOWN, 1/4" NPT, RPM UNKNOWN, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to ... morehave it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items.
3 ATLAS COPCO LTV26 SR006-10 3/8" REVERSIBLE PNEUMATIC NUTRUNNERS nut drivers 6.3 bar 90ps 800 r/min your buying all 3 air tools any questions call or text me 815 848 2844
Atlas Copco pneumatic drill/ driver Model LUM-21-HRF15-U; 1600 rpm; 1/4" npt top connection; Max pressure 7 bar(103 psi) 1/4" hex bit quick change chuck; Made in Sweden; good quality Used. Good functional condition(no leaks) Buyer pays shipping Accept Paypal or MO
Atlas Copco LTP51H002-20 3/4" 175 Rpm Pneumatic Impact Bar Torque Wrench/Nutrunner THIS ITEM IS USE AND HAS SOME WEAR ON IT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTP51H002-20 OVERALL DIMENSIONS: WIDTH: 10" LENGTH: 12.25" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT ... moreOF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT G
ATLAS COPCO- PNEUMATIC NUTRUNNER- ADJUSTABLE TORQUE- 370 RPM- 48 NM- 1/2" PART# WORN OFF. I COMBINE SHIPPING.
Atlas Copco LTP61PH500-20 3/4" 140 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED AND HAS SOME WEAR ON IT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTP61PH500-20 OVERALL DIMENSIONS: WIDTH: 10.5" LENGTH: 12.25" HEIGHT: 3.5" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT ... moreOF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT G
YOU ARE BIDDING ON A USED ATLAS COPCO MODEL EP5PT HR42/C 1/4" DRIVE PISTOL GRIP PNEUMATIC NUTRUNNER. THE NUTRUNNER DOES SHOW SOME WEAR BUT IS FULLY FUNCTIONAL AND IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
UP FOR BID IS AN ATLAS COPCO MDL. LTV21 SRO7-6 PNEUMATIC 1/4" DRIVE NUTRUNNER. IT IS STAMPED 700 RPM. THE TOOL IS IN GOOD WORKING CONDITION.
ATLAS COPCO- PNEUMATIC NUTRUNNER- 3/8" WITH REVERSE. HANGING DEVICE, IN USED CONDITION. CANNOT SEE THE PART# CANNOT CHECK, SOLD AS IS, PLEASE LOOK AT THE PHOTO, I COMBINE SHIPPING.
Rebuilt Pneumatic Rivet Buster by Atlas Copco + 2 Chisels Model: TEX-1133 BPM: 950 Length: 22 1/2" Bore and Stroke: 1 3/16" X 11" Air Consumption: 44 CFM Air Inlet Diameter: 1/2" NPT Chuck Size: 11X Jumbo This tool has been completely rebuilt by a professional air tool mechanic. It will come with new upper and lower sleeves and new bumber as well as retainer with sping and 2 surplus jumbo bits.
Used Atlas Copco Model RH 572 Pneumatic Hand Held Rock Drill in Good Working Order. The RH rock drills are designed for bench drilling. Secondary drilling and smooth blast drilling. The small size makes them ideal for work in confined spaces. The ergonomically designed combines light weight with extra comfort for the operator. Thanks to the vibration dampened handles and the efficient silencer. High power to weight ratio Ideal for work in confined spaces Adjustable flushing air valve for simple and rapid flushing Reliable design for minimum down time and easy maintenance Feel Free to Call/Text 732-794-8962 with Questions.
Atlas Copco Silenced Pneumatic Breaker TEX27PS 7BAR(approx. 101.5PSI) 1-1/4" X 6" Shank Size No Breakers included with this item. Item has been tested to work. And comes from a working environment. This listing is for(1) Atlas Copco Breaker USED. ShelfG15 06128000JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. ... moreBuyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
By Atlas Copco In very good working order Year 2010 HAS BEEN REFURBISHED WITH NEW BEARINGS. GEARS& HAS BEEN RE-PAINTED. LOTS OF DETAILED PICTURES BELOW IF YOU REQUIRE ANY FURTHER INFORMATION OR WISH TO VIEW PLAEE FEEL FREE TO CALL ON 07979 532383 Postage covers most of the UK. Postcodes excluded are NORTHERN IRELAND: BT POSTCODES. REPUBLIC OF IRELAND. SCOTTISH MAINLAND: IV21-IV24. IV26-IV28, IV40, KW5, KW11-KW13, FK19-FK21, PA36, PA40, PH30-PH32, PH34-PH41,PH50. SCOTTISH OFFSHORE: HS1-HS9. IV41-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA62-PA76, PH42-PH44, ZE1- ZE3. ISLE OF WIGHT: PO30-PO41. CHANNEL ISLANDS: GE-JE. SCOTTISH BORDERS: TD& DG. ALDERNEY.HERM& SARK: GY9(Please contact us for postage prices of these postcodes before bidding) Please check out my other items! Be sure to add me to your favourite sellers! `0d.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e287df9b8-0xf0-
2012 Chicago Pneumatic CPS185- Diesel Tow Behind Compressor 350 Hours on unit 2012 Model Year Perkins Diesel Engine BUYER BEWARE: This unit was on a site in NYC and was submerged in 3 feet of water during storm. Water line can be seen on engine. We inspected unit and found it would not start. Unit will certainly need a starter and an alternator. Unit has been covered by our customer's insurance and is being sold as a salvaged unit. Even with these parts installed. Unit may experience further issues. Specs for unit: Operation Free air delivery(cfm) 185 Working pressure(psig) 100 Operating weight(lbs) 2.375 Dimensions Fuel tank capacity(gal) 25 Length. Incl. towbar(in) 125" Width(in) 60" Height. Incl. tailpipe(in) 57" Engine Engine make: Perkins Engine model: 404D-22 Tier 4 Interim Engine power(hp) 49 Customer Service We ... moreare here to answer any questions you have and to assist you in your concerns. Please contact us prior to leaving us a neutral or negative feedback. We pride ourselves in having a personal touch with all of our customers and always want to leave you 100% satisfied. If you do not receive a prompt response. Please note that we are in the office Mon-Fri 12-3 EST. Responses may be slower during weekends and holidays. Positive feedback is left automatically& immediately upon receiving the same. Payment& Shipping We accept all methods of payment. Payment is due within 3 days of auction ending. Local pick up is always available. But please note that there will be an 8.875% New York sales tax on all pickups. If the listing is for local pick up only. We can help load and/or assist in working out the best rate to have a 3 rd party pick up. But it is ultimately the responsibility of the buyer to have the item transported to them. If the listing is available for shipping. We ship using USPS, UPS Ground, and FreightQuote. Your item will be shipped usually within 1-2 business days upon receiving payment. Please check your messages if you feel like there has been a delay in shipping and
Atlas Copco Pneumatic Nutrunner/Screwdriver Model#LTV SRO7-16- Has a DynaSwivel attachment. Free Shipping. This is used but tested and runs as it should. Please note: We do not sell to buyers outside of the United States of America. Too many times now. I have had to cancel and petition ebay for a return of the Final Value Fee. If for some reason you think you should be an exception to this rule, please email me to discuss. I ask your understanding on our handling time. We ship on Tuesdays and Fridays. If processing and packing does not happen in time for a Tuesday shipment. Your package has to wait until Friday. We will ship as fast as possible. Pallet Racking: Beams. Frames, decking, and uprights are all available. New and Used, in stock. Planning your next storage project. Call us and have our design consultants help you configure your ... morestorage solution. Call direct for a quote: 616-255-1837(ask for Dave. We purchase Commercial and Industrial Close outs and Liquidations. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e3dd0bd2a-0xff-
Inventory Number: 12090045173 Manufacturer: Description: 2 PNEUMATIC 1/2" RIGHT ANGLE NUTRUNNERS. ATLAS-COPCO Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: ATLAS-COPCO 1/2" NUTRUNNER, 1/2" NPT, 180 RPM, ONE: UNKNOWN MAKER) 1/2" NUTRUNNER, 3/8" NPT, 185 RPM, BOTH TESTED& WORK, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will ... moreautomatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities
Atlas Copco LTV-37-SR004-13 Nut Runner/Torque Gun 1/2" Drive THIS ITEM IS USED AND HAS SOME RUST AROUND THE ONE END. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTV-37-SR004-13 OVERALL DIMENSIONS: WIDTH: 3" LENGTH: 19" HEIGHT: 2" SHIPPING WEIGHT: 10 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES ... moreAND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S W
Atlas Copco LTV 38 R50-13 Nut Runner/Torque Gun 1/2" Drive Pneumatic Nutrunner THIS ITEM IS USED. IT HAS SOME RUST AND WEAR ON THE ITEM. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTV 38 R50-13 OVERALL DIMENSIONS: WIDTH: 3" LENGTH: 19" HEIGHT: 2" SHIPPING WEIGHT: 10 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MA
is work in good condition
Inventory Number: 12090045141 Manufacturer: Description: 2 ATLAS-COPCO PNEUMATIC DRILLS WITH JACOB CHUCKS. 0-3/8" CAPACITY, 1/4" N Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: 1/16- 3/8" CAPACITY, ONE: 0-3/8" CAPACITY, RPM UNKNOWN, BOTH TESTED& WORK, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and ... moreyou will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sel
Inventory Number: 12090045125 Manufacturer: Description: 2 PNEUMATIC GRINDERS. ROCKWELL 4500 RPM, ATLAS-COPCO 6000 RPM Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: ROCKWELL 58 SR 554, 4500 RPM, 3/8" NPT, ONE: ATLAS-COPCO A451464, 6000 RPM, 1/2" NPT, BOTH TESTED& WORK, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge ... moretax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items
ALTAS-COPCO PNEUMATIC SREW-FEED DRILL. MODEL RAB12 L450 CRATING AND SHIPPING CAN BE QUOTED IF REQUIRED. THE BARE TOOL WEIGHT IS 57# Powered by The free listing tool. List your items fast and easy and manage your active items.
ATLAS COPCO Pneumatic 1/2" reversible nut runner. Air ratchet LTV 39 R56-13 RPM: 460 TORQUE SET TO 480 INCH LBS/ 40 FT. LBS POUNDS This used tool has some minor scuffs and scrapes from use. But is in excellent condition. FREE US SHIPPING
Inventory Number: 04131540049 Manufacturer: Description: ATLAS COPCO LLA250 PNEUMATIC/AIR HOIST. 1/4 TON Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine ... moreitems purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the
ATLAS- COPCO. NUTRUNNER, REVERSE- 3/8" ADJUSTABLE TORQUE-THE PART# WORN OFF, THIS TOOL WORKS FINE, I COMBINE SHIPPING.
Atlas Copco Air Pneumatic Hammer/Chisel w/Detachable Shaft THIS ITEM IS USED AND WORN. BUT DOES NOT APPEAR TO BE DAMAGED OTHER THAN COSMETICALLY. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 9.5" LENGTH: 26.5" HEIGHT: 3.5" SHIPPING WEIGHT: 14 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS ... morePACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER&
Atlas Copco Air Pneumatic Chisel/Hammer D09112 THIS ITEM IS USED. WORN, AND THERE IS A HOLE ON THE TOP OF THE ITEM AS SHOWN ABOVE. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 6" LENGTH: 25" HEIGHT: 3" SHIPPING WEIGHT: 10 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 ... moreFOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUP
Atlas Copco 6" Pneumatic Random Orbital Disc Sander LST32HO90-15 Features- Extraction model- central suction(hosing not included) Powerful. Vertically mounted air motor- Low noise- Long service life- Low vibrations with double counter-weight system- Lubrication and silicon free- 8 mm orbit diameter(for medium fine surface finish) Two handle grip Description- Part Number: LST32HO90-15( LST32 H090-15) Manufacturer: Atlas Copco- Motor Type: Vane- Disc Diameter: 6" Max Output: 0.3 kW- Max Free Speed: 9000 r/min- Orbit Diameter: 8 mm- Weight: 1.4 kg(3 lbs) Height Over Spindle: 120 mm- Length: 300 mm(11.81" Tested and works as it should. Comes as pictured. 7580( JK)4/29/13
In ErgoPulse non shut-off tools the tool produces pulses until the operator releases the trigger. Preferred in applications where it is an advantage for the operator to be able to control the process by shutting off the tool manually. Features& benefits High reliability and durability High speed. Short cycle times One-handed operation High power-to-weight ratio No springs to wear out High precision components No reaction forces Light, well-balanced tools Low noise levels Lubrication free Technical data Units: Metric Imperial Technical Specifications Model type Pistol Shut-off No Bolt size M8-M10 mm Square drive 9.53 mm Torque range 0- 65 Nm Free speed 8000 r/min Weight 1 kg Length 158 mm CS distance 23 mm Air consumption under load 9 l/s Recommended hose size 10 mm Air inlet thread 1/4 inch Sound standard ISO15744 Sound power 93 dB(A) ... moreSound uncertainty 3 dB(A) Sound pressure 82 dB(A) Vibration standard ISO28927-2 Vibration value 4.1 m/s² Vibration uncertainty 1.2 m/s² Units: Metric Imperial Technical Specifications Model type Pistol Shut-off No Bolt size M8-M10 mm Square drive 3/8 inch Torque range 0- 48 ft lb Free speed 8000 r/min Weight 2.2 lb Length 6.22 inch CS distance 0.91 inch Air consumption under load 19 cfm Recommended hose size 10 mm Air inlet thread 1/4 inch Sound standard ISO15744 Sound power 93 dB(A) Sound uncertainty 3 dB(A) Sound pressure 82 dB(A) Vibration standard ISO28927-2 Vibration value 4.1 m/s² Vibration uncertainty
Atlas Copco 3/8 inch small Pneumatic impact wrench model is EP8XSHRX10 With forwar d an d reverse Torque is 30-52NM. To see this item in action. Check out my You Tube channel, YellowBanksInd. Thanks
ATLAS COPCO LTV-46 PNEUMATIC RIGHT ANGLE NUTRUNNER Good working condition
Atlas Copco Air Pneumatic Drill Screwdriver Nutrunner. Item is used but in good condition. A very expensive tool! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e64a1ffe0-0xf1-
Inventory Number: 04132140068 Manufacturer: Description: ATLAS COPCO LSV 48 S085-727 PNEUMATIC ANGLE VERTICAL GRINDER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, WORKS WHEN AIR IS APPLIED, 5/8" ARBOR. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing ... moreon auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of t
Atlas Copco LTP51PH001-20 3/4" 85 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAS TAPE ON THE HANDLE, AND IS LOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTP51PH001-20 OVERALL DIMENSIONS: WIDTH: 10.5" LENGTH: 12.25" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION ... moreOF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON
Atlas Copco LMP51PH001-20 3/4" 90 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAD TAPE ON THE HANDLE, AND IS LOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LMP51PH001-20 OVERALL DIMENSIONS: WIDTH: 10.5" LENGTH: 12.25" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION ... moreOF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON
Atlas Copco LMP51H002-20 3/4" 200 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAS TAPE ON THE HANDLE, AND IS LOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LMP51H002-20 OVERALL DIMENSIONS: WIDTH: 10" LENGTH: 12.25" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF ... moreTHE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EB
Atlas Copco LTP51H002-20 3/4" 200 Rpm Pmax 7 Bar Torque Wrench/Nutrunner THIS ITEM IS USED. HAS TAPE ON THE HANDLE, AND IS LOOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTP51H002-20 OVERALL DIMENSIONS: WIDTH: 10" LENGTH: 12.25" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER ... moreAND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THER
Atlas Copco LTP51PH002-20 3/4" 130 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAD TAPE ON THE HANDLE, AND IS LOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTP51PH002-20 OVERALL DIMENSIONS: WIDTH: 12" LENGTH: 10" HEIGHT: 3" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE ... moreBUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY.
Atlas Copco LMP51PH002-20 3/4" 135 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAD TAPE ON THE HANDLE, AND IS LOOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LMP51PH002-20 OVERALL DIMENSIONS: WIDTH: 12.25" LENGTH: 10.5" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION ... moreOF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST
Atlas Copco LMP51PH003-19 3/4" 220 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAD TAPE ON THE HANDLE, AND IS LOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LMP51PH003-19 OVERALL DIMENSIONS: WIDTH: 9.5" LENGTH: 10.5" HEIGHT: 2.75" SHIPPING WEIGHT: 12 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION ... moreOF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON
Atlas Copco LTP51PH003-19 3/4" 190 Rpm Pneumatic Impact Torque Wrench/Nutrunner THIS ITEM IS USED. IT HAD TAPE ON THE HANDLE, AND IS LOSING ITS PAINT. HERE IS A PDF OF ATLAS COPCO NUTRUNNERS IF YOU ARE LOOKING FOR A CERTAIN TYPE: SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTP51PH003-19 OVERALL DIMENSIONS: WIDTH: 10.25" LENGTH: 11.5" HEIGHT: 2.75" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION ... moreOF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST O
atlas copco made in sweden LTV 27 3/8 drive pneumatic nutrunner- works- SR 003-10- A578072- CA-N9TR- used if any questions please ask all sales final. please checkout my other items for sale. thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e66891599-0xf5-
ATLAS COPCO AIR POWERED CONCRETE SAW PNEUMATIC SAW 18 INCH BLADE ATLAS COPCO AIR POWERED CONCRETE SAW PNEUMATIC SAW 18 INCH BLADE. THE UNIT WORKS FINE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY ... moreBLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
Inventory Number: 04132140067 Manufacturer: Description: ATLAS COPCO LBB45-H004 PNEUMATIC DRILL. 4000 RPM, 1/32" 5/8" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, WORKS WHEN AIR IS APPLIED, INCLUDES CHUCK KEY. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FIL
Inventory Number: 04132140074 Manufacturer: Description: ATLAS COPCO GTG 40S060-700 PNEUMATIC GRINDER. SANDER, POLISHER, 6000 RPM Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 5/8-11 ARBOR, 7 BAR MAX, WORKS WHEN AIR IS APPLIED. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer ... moreBuy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional item
Inventory Number: 12090045183 Manufacturer: Description: 2 ATLAS-COPCO PNEUMATIC REVERSIBLE 3/8" RIGHT ANGLE NUTRUNNERS Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 2, BOTH TESTED& WORK, RPM UNKNOWN, 1/4" NPT, ADJUSTABLE TORQUE, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auct
Atlas Copco Pneumatic Electric Tool Rotating Adjustable Control Arm Balancer PNEUMATIC ELECTRIC ATLAS COPCO SPECIAL HARD TO FIND TOOL CONTROL ARM BALANCER! GREAT CONDITION! COMES WITH THE FOLLOWING: MODEL NO. 4220 2663 82 S/N: A0785074 MEASURES 30 INCHES TALL! IT IS ADJUSTABLE UP AND DOWN! ARM SWINGS OUT AROUND 36" HAS A TOOL HOLDER THAT MEASURES 1 3/8" DIA AND 6 INCHES IN LENGTH! ADJUSTABLE DRAG TENSION! MOUNTABLE BASS BRACKET! BASE MEASURES 6.250 X 6.250 INCHES IN SIZE! HAS HOLES DRILLED THROUGH FOR MOUNTING ABILITY! 100S OF USES FOR THIS CONTROL ARM! ALSO HAS COMPUTER 9PIN CONNECTION! VERY EXPENSIVE CONTROL ARM IF YOU WHERE TO BUY NEW! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS! RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e6e0255c4-0xf7-
Your bid is for(3) LOT(3) ATLAS COPCO LUM 25 HRX 05 U 1/4" Hex 480rpm Pneumatic Drivers These were in use at a major automotive plant that shut down. They used their tools nonstop but also maintained them. Tested with air. Working in forward and reverse. One has an odd modification where a hose is coming out where a screw would be. I am guessing it has to do with the air exhaust.
Your bid is for(3) Atlas Copco LUM 12 HR 09 Reversible 1/4" Hex Quick-change 850 RPM pneumatic drivers These were in use at a major automotive plant that shut down. They used their tools nonstop but also maintained them. Tested with air. Working in forward and reverse. As you can see from the wear on one, it obviously has been rebuilt with a new tip dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e8185dd8c-0xf2-
Your bid is for(3) Atlas Copco LUM 27 HRX 08-U Reversible 1/4" Hex Quick-change 750 RPM These were in use at a major automotive plant that shut down. They used their tools nonstop but also maintained them. Tested with air. Working in forward and reverse.
S3 Make: Atlas Copco Model: RRH- 12P- NPT No: A539045 7Bar- 100 PSI We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty ... moreForklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
S10 Atlas Copco Model: RRH06P 7 Bar 100Psi We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
ATLAS COPCO 2300 RPM REV 1/4" HEX DRIVE PNEUMATIC SCREW GUN-THIS PNEUMATIC SCREW GUN/ DRIVER IS USED IN GOOD CONDITION AND WORKS GREAT! ATLAS COPCO MODEL# LUM 21HR 23-U-REVERSIBLE-RPM: 2300-SIZE: 1/4" HEX-0.5-2.5 NM-TOP OF THE LINE AIR TOOL MADE IN SWEDEN! COMES EXACTLY AS PICTURED! GREAT BUY!
ATLAS COPCO LUM12 SR11-U AIR PANCAKE DRILL W/ OUT PANCAKE HEAD-THIS PANCAKE DRILL NEEDS REPAIR. DOES NOT WORK! IT IS MISSING THE PANCAKE HEAD AND IT DOES NOT SPIN WHEN CONNECTED TO AIR-UNSURE AS TO WHY IT DOES NOT SPIN. IT MAYBE A SIMPLE FIX OR NOT-ATLAS COPCO MODEL LUM12 SR11-U-REVERSIBLE-LIGHTWEIGHT AT ONLY 1 POUND! ATLAS COPCO ARE TOP OF THE LINE AIR TOOLS FOR THE AIRCRAFT/ AVIATION INDUSTRY-COMES EXACTLY AS PICTURED! SELLING"AS IS" NO RETURNS GREAT FIND!
ATLAS COPCO- PNEUMATIC NUTRUNNER ADJUSTABLE TORQUE- LTV-27 S008-10. 3/8" GOOD CONDITION, I COMBINE SHIPPING.
ATLAS COPCO- PNEUMATIC NUTRUNNER- LTV27 S006-10. ADJUSTABLE TORQUE- 15 NM 3/8" GOOD CONDITION, I COMBINE SHIPPING. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e9f26d64e-0x100-
Inventory Number: 02130750127 Manufacturer: Description: 2 ATLAS COPCO 1/4" HEX REVERSIBLE PNEUMATIC SCREW GUNS. 1/8" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 2, RPM UNKNOWN, ONE IS MISSING TRIGGER BUTTON BUT STILL WORKS, BOTH TESTED& WORK, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time ... moreof invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of som
ATLAS COPCO 1-1/2" PNEUMATIC HEX SQUARE DRIVE PANCAKE AIR DRILL-THIS PANCAKE DRILL'S MOTOR RUNS GREAT BUT THE PANCAKE HEAD COMES LOOSE IN PIECES! WE HAVE NO KNOWLEDGE ON HOW TO PUT IT BACK TOGETHER OR IF ALL THE PARTS ARE THERE IN WORKING CONDITION! THE ATLAS COPCO PISTOL GRIP MOTOR CAN ALSO BE USED AS A SCREWDRIVER WITH THE RIGHT HEAD APPLICATION-ATLAS COPCO MODEL LUD 22 HR12-RPM: 750-REVERSIBLE-TOP OF THE LINE AIR TOOLS MADE IN SWEDEN-PANCAKE HEAD IS 1-1/2" SMALL AND LIGHT WEIGHT PISTOL GRIP AIR TOOL THAT WEIGHS UNDER 2 POUNDS! COMES EXACTLY AS PICTURED! SEE ALL PICS! SELLING"AS IS" NO RETURNS ON THIS ITEM PLEASE GREAT BUY!
S17 Air Hammer Make: ATLAS COPCO Model: RRH 06P We hooked up air to this and everything appeared to be in working order We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only $15 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
ATLAS COPCO- RT ANGLE PNEUMATIC NUTRUNNER TORQUE ADJUST- 3/8" 40 NM- LTV 37. LABEL WORN OFF. GOOD CONDITION, I COMBINE SHIPPING. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13ea3baac24-0xfe-
S22 Air Hammer Make: ATLAS COPCO Model: RRH 10P We hooked up air to this and everything appeared to be in working order We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only $15 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ea4553ebc-0x109-
Up for grabs is an Atlas Copco 90 degree aircraft drill with a custom 1/4-28 threaded insert. It runs great and true. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 12:44:40 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
ATLAS COPCO PNEUMATIC NUTRUNNER P/N LTV28X- R28-10 ADJUSTABLE TORQUE REVERSIBLE Posted with
ATLAS COPCO LTV26 SR006-10 3/8" REVERSIBLE PNEUMATIC NUTRUNNERS nut drivers 6.3 bar 90ps 800 r/min
YOU ARE BIDDING ON A USED ATLAS COPCO LUM 22 HR PISTOL GRIP PNEUMATIC SCREWDRIVER. THE SCREWDRIVER DOES SHOW SOME HEAVY WEAR AND I CANT QUITE MAKE OUT THE EXACT MODEL# ON THE TAG. DESPI TE THE WEAR THE SCREWDRIVER IS FULLY FUNCTIONAL AND IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
Atlas Copco LLA1000 1Ton Air Hoist Pneumatic 9ft of Lift SPECIFICATION Bullseye Catalog# 30468 Capacity in Tons: 1, Capacity in Lbs: 2200, Lift Travel(ft) 9.2, Lift Speed(ft/min) 20.7@ Full Load, Air Powered Pneumatic Hoist Lifting Medium: Link Chain, Minimum Distance between Hooks(inches) 19, Pendent/Control Length in feet from Bottom of Hoist: 6.2, Hoist Comes with Chain Container, Weight of Hoist(Lbs) 52, This is a used hoist in good condition. It has been load tested and works as it should, Weight: 52 lbs, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal ... moreis to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shippe
ATLAS COPCO- NUTRUNNER- ADJUSTABLE TORQUE- LTV37- REVERSE- 3/8" 30 NM, I COMBINE SHIPPING. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ed7e29bc8-0xfe-
LOT SALE! Atlas Copco Pneumatic pistol grip shut-off screwdriver*AS IS* International buyers must provide their own shipping account to ship unit on. International buyers must provide own shipping account& pass US Customs security screening. SHIPPING COSTS MAY DIFFER FROM EBAY LISTING PLEASE CALL Please visit us at: Or call: Ask for Shaun Long 530-278-9114
LBV16 055-92: Pneumatic handheld drill. 90° angle head model ATLAS COPCO 5500RPM LBV drills are of highest quality and built to provide consistent reliability and performance in a wide range of applications. Their advanced ergonomic designs make your job easier. Safer and more efficient. IT IS IN VERY USED CONDTION HAS MULTI SCRATCHES AND DENTS AND EVEN HAS TORN PAINT COMING OFF PARTS THE TOP HANDLE HAS SOME RUST ON IT. PLEASE SEE PICTURES FOR ACTUAL DETAILS. All users with 0 Feedback score “MUST E-mail me� before buying or placing a bid, Otherwise you are going to be Blocked from this Auction! THANKS FOR YOUR INTEREST AND GOOD LUCK! Attention! We DO NOT SHIP TO: MALAYSIA. SINGAPORE, GERMANY, MALDIVES, INDIA! PLEASE READ SHIPPING POLICY for INTERNATIONAL BUYERS BELOW! Payment: PayPal(eBay payment) Payment should be ... morereceived within 5 calendar days after notification or the winning bid will automatically be voided with corresponded report and feedback. Please in your PayPal payment. State your confirmed address. No item will be shipped to unconfirmed address. The easiest way: click any PayPal link on this page. Complete transaction right after auction end and I will ship your item the same or next business day. International Buyers – Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying I do not provide Doctorate less value for International Sale. DO NOT EVEN ASK THIS. Will Show Actual VALUE ONLY. Shipping: Shipping and Insurance is calculated based on package size. Weight and destination. Combining shipping: every other item: 50% off. Once I get payment the package will be shipped same or next business day, so you will receive an item within 2-6 business days(US) depending on location. Please expect no shipping in weekends. I have never delayed with shipping
LBB 16 EPX-060-U: Pneumatic handheld drill. Pistol grip model ATLAS COPCO 100PSI LBB drills are of highest quality and built to provide consistent reliability and performance in a wide range of applications. Their advanced ergonomic designs make your job easier. Safer and more efficient. DRILL IS IN REALLY GOOD CONDTION HAS INGRAVING NUMBER ON TOP(11-3779) OVERALL FEW SMALL SCRATCHES NO SIGN OF DROPPAGE AND IS GOOD WORKING CONDITION PLEASE SEE PICTURES FOR ALL DETAILS LISITNG INCLUDES: LBB 16 EPX-060-U: Pneumatic handheld drill All users with 0 Feedback score “MUST E-mail me� before buying or placing a bid, Otherwise you are going to be Blocked from this Auction! THANKS FOR YOUR INTEREST AND GOOD LUCK! Attention! We DO NOT SHIP TO: MALAYSIA. SINGAPORE, GERMANY, MALDIVES, INDIA! PLEASE READ SHIPPING POLICY for INTERNATIONAL BUYERS ... moreBELOW! Payment: PayPal(eBay payment) Payment should be received within 5 calendar days after notification or the winning bid will automatically be voided with corresponded report and feedback. Please in your PayPal payment. State your confirmed address. No item will be shipped to unconfirmed address. The easiest way: click any PayPal link on this page. Complete transaction right after auction end and I will ship your item the same or next business day. International Buyers – Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying I do not provide Doctorate less value for International Sale. DO NOT EVEN ASK THIS. Will Show Actual VALUE ONLY. Shipping: Shipping and Insurance is calculated based on package size. Weight and destination. Combining shipping: every other item: 50% off. Once I get payment the package will be shipped same or next business day, so you will receive an item within 2-6 business days(US) depending on location. Please expect
For sale is one used Atlas Copco LBB 16 EPX-005-U Pneumatic Drill. The item is used but in good condition. Everything functions 100% but there are some signs of wear including some scuffs and scratches consistent with its use. Please let me know if you have any questions or would like to see more photos and I would be glad to help! Thanks again! Metric Specifications Technical Specifications Model type Pistol, Front type Chuck, Free speed 500 r/min, Power 340 W, Weight 0.7 kg, Air consumption at free speed 9.5 l/s, Rec hose size 6.3 mm, Air inlet thread 1/4 inch, Obsolete vibration standard ISO8662-1, Obsolete Vibration value Vibration standard ISO28927-5, Vibration value Sound standard ISO15744, Sound uncertainty 3 dB(A) Sound power 93 dB(A) Sound pressure 82 dB(A) Imperial Specifications. Technical Specifications Model type Pistol, Front ... moretype Chuck, Free speed 500 r/min, Power 0.45 HP, Weight 1.5 lb, Air consumption at free speed 20 cfm, Rec hose size 1/4 inch, Air inlet thread 1/4 inch, Obsolete vibration standard ISO8662-1, Obsolete Vibration value Vibration standard ISO28927-5, Vibration value Sound standard ISO15744, Sound uncertainty 3 dB(A) Sound power 93 dB(A) Sound pressure 82 dB(A) All items are described to the best of my ability.so please ask questions. I will provide a prompt response. I am a reseller. The items I sell come from Estate Sales, Resale Shops, Yard Sales and Friends/Family. Therefore, most are used or vintage unless stated otherwise. I have to say SOLD AS-IS because I AM NOT AN EXPERT BY ANY MEANS although every item is tested and will be described accurately, I cannot ensure longevity or the proper function of something I was not capable or aware of testing.as instructions are usually not available. Thats why I encourage QUESTIONS! Also Ask for extra pictures if needed. I will provide a prompt response. I will be happy to combine shipping. Please ask for quote. I cannot be responsible for items mishandled by the postal provider. Please, Please purchase/request insurance. A
YOU ARE BIDDING ON A USED ATLAS COPCO PNEUMATIC SCREWDRIVER. THE MODEL NUMBER FOR THIS SCREDRIVER IS"LUM12HRX5" ALTHOUGH USED ITS STILL IN GOOD WORKING CONDITION. IT HAS LOTS OF COSMETIC WEAR WITH SCRATCHES AND GRIND MARKS(SHOWN IN PICTURES ABOVE) MADE IN SWEDEN. THERE IS NO BOX OR MANUAL INCLUDED IN THIS AUCTION. LISTING IS FOR SCREWDRIVER ONLY. PLEASE VIEW ALL PICTURES AND DESCRIPTION BEFORE BIDDING AS ALL ITEMS ARE SOLD AS IS. THERE ARE NO REFUNDS OR RETURNS. WHAT YOU SEE IN THE PICTURES IS THE ACTUAL ITEM(S) YOU WILL RECIEVE UPON WINNING THIS AUCTION(UNLESS STOCK PHOTO IS USED FOR DVD'S AND GAMES) PAYMENT IS DUE WITHIN 5 DAYS OF CLOSING DATE. I WILL ONLY SHIP INSIDE THE UNITED STATES. PLEASE ASK IF YOU HAVE ANY QUESTIONS. GOOD LUCK BIDDIN!
Inventory Number: 12090045211 Manufacturer: Description: 2 ATLAS-COPCO 1/2" PNEUMATIC RATCHET WRENCH NUTRUNNERS. 1/4" NPT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: NON-REVERSIBLE, ADJUSTABLE TORQUE, RPM UNKNOWN, ONE: REVERSIBLE, RIGHT ANGLE, ADJUSTABLE TORQUE, RPM UNKNOWN, BOTH TESTED& WORK, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically ... morecharge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. A
SKU: UR558737RA A: 0015000000mIrdV O: 0065000000NJvUi PA: 0015000000kLkjs View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Atlas Copco TEX P90S Pneumatic Breaker in Good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions ... morefor industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Atlas Copco Model: P90S Type: Pneumatic Breaker Year: 2004 Hours: Unknown Serial Number: 002443 Features& Specifications: Breaker Type: standard Breaker Version: silenced Air Consumption: 85 cfm Impact Rate: 1260 blows/min Sound Level Guaranteed: 111 dB Sound Pressure Level: 99 dB SOFSTART™ two-step trigger Dimensions& Weight: Dimensions: L 28" x W 17" x H 8" Shipping Weight: 145 lbs. Resources: For more information on this unit including full specifications. Visit the manufacturer’s website or view the manufacturer’s brochure(pdf) Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies wi
ATLAS COPCO HEX HEAD PNEUMATIC PISTOL GRIP NUTRUNNER?EP-5PTX17-H? ATLAS COPCO AIR POWERED PISTOL GRIP NUTRUNNER USED CONDITION?EP-5PTX17-H? UNABLE TO READ COMPLETE PART NUMBER. PLEASE SEE ENLARGED PHOTO FOR ADDITIONAL INFORMATION. HEX HEAD(FITS HEX BITS) REVERSING GUARANTEED NOT DOA QZ 159 SW 5 CMP 1/30/12 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. ... moreItems that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for SEVEN(7) DAYS. We will NOT accept anything after SEVEN(7) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or
1/4" NPT. 7 BAR MAX, 380 RPM MAX, 22 TO 47 NEWTON METERS, FOR AUTOMATED SYSTEM NO ON/OFF SWITCH USED BUT VERY GOOD WORKING CONDITION! SAME MODEL BUT DIFFERENT ACCESSARIES(PIPE CONNECTIONS) AS YOU SEE ON PICTURES. 5-101-B)
ATLAS COPCO LARGE PNEUMATIC RIGHT ANGLE NUTRUNNER LTV- 46 S004- 13 NO. A764025 The right angle nutrunner is non-reversible and has torque control and a square drive. The right angle nutrunners with torque control have a highly accurate and proven shut-off mechanism when the desired torque has been achieved. The tool is ergonomically designed and is very reliable. The right angle nutrunner shuts off at the same torque. Rundown after rundown. The torque and shutoff of the tool is unaffected by variables such as variations in the air pressure or lubrication. The torque and shutoff of the tool is independent of joint types and variations, resulting in the same torque on both hard and soft joints. Low tool reaction and ergonomic design results in reduced operator fatigue. The right angle nutrunners are fast and have a proven design. These tools ... moreare available in reversible and non-reversible models. Specifications: Weight 6.39 LBS. Length 19.5 IN. Drive Size 0.5 IN. Speed 400 RPM. Low Torque 18.4 FT. LBS. High Torque 53.8 FT. LBS. PURCHASED FROM A CLOSED GM PLANT IN WILLOW RUN AS SHOWN IN PHOTO(S)
Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Atlas Copco Pneumatic Screwdriver Model: LUM 21 SR10-U SR 10-U 1000 RPM A639021 lm Contact Us@ info@idealmachinery.com or feel free to call 248-627-3135 WARRANTY All items include a 30 day warranty from date of purchase; unless sold"as is" and does not including manuals. If you are unsatisfied with your purchase. You may return it for an exchange or refund. Our only requirement is that you not tamper with or remove our security seals. As doing so would void the warranty. Although this item came out of a working facility we have no way of testing it. Please email me with any questions and thanks for looking! Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites ... moreIf paying by business check. Cashiers check or money order; please make payable to Ideal Machinery, Inc. For local pick-ups, payment must be received 5 days prior to loading. Pa yment in full is expected within 7 days of listing. Wire Transfer. PayPal, cashiers checks and money orders accepted. NO PERSONAL CHECKS, Please! All local. County, state and federal taxes are the sole responsibility of the buyer and are not included in the purchase price. Items can be picked up at 10230 N. Holly Rd. Holly. Michigan 48442. Please be sure and call our office at 248-627-3135 to schedule a time if you are picking up your item. We ship Monday through Friday. We are in the Eastern Standard Time zone. If a request for overnight shipping is made before 3:00 p.m. We can get it to you the next day. We try our best to get all packages out within 48 hours but most items will ship the next day. Please check our feedback; everyone raves about our quick shipping. We take our feedback very seriously. We offer FREE Same Day Courier Service within 100 miles of our location for ALL items with a BUY IT NOW price of $900 or more and weighing less than 100 lbs. This offer is for buyers who pay our BUY
Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Atlas Copco Pneumatic Screwdriver Model: T-500-6522 30 NM lm Contact Us@ info@idealmachinery.com or feel free to call 248-627-3135 WARRANTY All items include a 30 day warranty from date of purchase; unless sold"as is" and does not including manuals. If you are unsatisfied with your purchase. You may return it for an exchange or refund. Our only requirement is that you not tamper with or remove our security seals. As doing so would void the warranty. Although this item came out of a working facility we have no way of testing it. Please email me with any questions and thanks for looking! Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites If paying by business ... morecheck. Cashiers check or money order; please make payable to Ideal Machinery, Inc. For local pick-ups, payment must be received 5 days prior to loading. Pa yment in full is expected within 7 days of listing. Wire Transfer. PayPal, cashiers checks and money orders accepted. NO PERSONAL CHECKS, Please! All local. County, state and federal taxes are the sole responsibility of the buyer and are not included in the purchase price. Items can be picked up at 10230 N. Holly Rd. Holly. Michigan 48442. Please be sure and call our office at 248-627-3135 to schedule a time if you are picking up your item. We ship Monday through Friday. We are in the Eastern Standard Time zone. If a request for overnight shipping is made before 3:00 p.m. We can get it to you the next day. We try our best to get all packages out within 48 hours but most items will ship the next day. Please check our feedback; everyone raves about our quick shipping. We take our feedback very seriously. We offer FREE Same Day Courier Service within 100 miles of our location for ALL items with a BUY IT NOW price of $900 or more and weighing less than 100 lbs. This offer is for buyers who pay our BUY IT NOW price. We guar
TERMS AND CONDITIONS; All products are SOLD AS IS and UNABLE TO TEST unless otherwise noted in the description. Please read complete description and look closely at photos. Please ask all questions. Or request additional information prior to bidding on items. All sales are final, and all products are sold without warranties or guarantee, and no returns are accepted. Shipping Insurance included in Shipping and Handling. All items will be shipped no later than the next business day after CLEARED payment is received by 4pm EST, Monday through Friday. You are bidding on a Atlas Copco LME44 A0042 LME44A0042 pneumatic nut runner rpm 420. SEE PHOTOS) 5-D Please Visit Our Ebay Store For More Items!
SKU: UR712704RA A: 0015000000mIrdV O: 0065000000NJvaq PA: 0015000000kLkjs View Photo Gallery. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Atlas Copco TEX P60S Pneumatic Breaker in Good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment ... moreand tooling. General rental tools, and small equipment. Overview: Make: Atlas Copco Model: P60S Type: Pneumatic Breaker Year: 2007 Serial Number: 004609 Features& Specifications: Breaker Type: standard Breaker Version: silenced Air Consumption: 76 cfm Impact Rate: 1500 blows/min Sound Level Guaranteed: 111 dB Sound Pressure Level: 97 dB SOFSTART™ two-step trigger Dimensions& Weight: Dimensions: L 28" x W 17" x H 8" Shipping Weight: 80 lbs. Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource
Atlas-Copco EP6PS-HR42 1/4" Pistol-Grip Hex-Head Air/Pneumatic Nutrunner 7 BAR THIS PURCHASE IS FOR ONE USED ATLAS NUTRUNNER. THE ONES WE HAVE IN STOCK ARE SLIGHTLY WORN. AND HAVE SOME SURFACE SCRATCHES. TWO OF THE NUTRUNNERS IN STOCK HAVE PNEUMATIC TUBING ATTACHED TO THEM; YOU WILL NOT RECEIVE ANY INDIVIDUAL NUTRUNNER UNLESS SPECIFIED, AND IF THEY ARE STILL IN STOCK. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# EP6PS-HR42 OVERALL DIMENSIONS: WIDTH: 1.5" LENGTH: 6" HEIGHT: 7" SHIPPING WEIGHT: 5 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK ... moreUP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMER