|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: For parts or not working Location: Fleetwood, United States WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. are more than happy to rectify any problems by replacing. We think good. We are happy to accommodate, but ... morethismust be taken care of. • Local pick up.
Buy It Now
Condition: Used Location: Westminster, United States MXD Process full vacuum 30 gallon reactor. Appears to be constructed with an outer insulation jacket, not equipped with any inlet or outlet port. Portable. ... moreLarge transparent, thick clear hinged cover. Bottom sanitary fitting drain (see photos of paneled bottom construction with exit pipe). Two sanitary inflow fittings on the upper tank. 316 stainless steel construction.
Buy It Now
Free Shipping Condition: New – Open box Location: Franklin, United States 2600 Gallon Specialty Fabrications Inc. Stainless Steel Jacketed Mixing Processing Tank Vat
Buy It Now
Condition: Used Location: Phoenix, United States Build Date The Item may vary from picture as manufacture may change model appearance. The sale of this item may be subject to regulation by the U.S. Food ... moreand Drug Administration and state and local regulatory agencies.
Buy It Now
Condition: Used Location: Apollo, United States Approx 200 Gallon. Stainless Steel. Serial: 6664.
Buy It Now
$1500.00 Shipping Condition: Used Location: Plattsburgh, United States Stainless Steel Tank/ Laboratory Tank/ CIP Tank/ Process Tank with ESA 65-4. Stainless Steel Tank/ Laboratory Tank/ CIP Tank/ Process Tank with drain ... morePan and EL-O-MATIC ESA 65-4 valve and Float Valve with sight glass. Check valve, triclamp connections Removed from shut down pharmaceutical plant. Unit is untested and sold'as is' PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. IF YOU FEEL THE SHIPPING COST FOR INTERNATIONAL LOCATION IS TOO MUCH. CONTACT US AND WE CAN CHECK IF WE CAN RE-SIZE THE BOX TO LOWER THE SHIPPING COST. DON'T LET SHIPPING COST MAKE YOUR DECISION. CONTACT US AND WE WILL WORK WITH YOU AS MUCH AS WE CAN! WE ALWAYS USE YOUR PAYPAL ADDRESS AND INFORMATION TERMS OF SALE Some items are offered“Used-As-Is” UNLESS IT’S NOTICED. This does not mean that the item does not work; it just means that we have not run this item in production ourselves and we don’t have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US. Good relationship If there are any problems with your order. Please contact us. We will work with you to resolve any issue as quickly as possible. We want customer 100% satisfaction! Launched from my store- Powered by
Buy It Now
Condition: Used Location: Fleetwood, United States Approx 900 Steel Tank. Used, in good condition. You are buying the tank in the condition as seen in the pictures. 2-3″ Flange Port. 1-2″ Flange port. ... moreWarranty Information us at six one zero-nine two one-eight eight four eight.
Buy It Now
Condition: New Location: Middletown, United States
Buy It Now
$139.44 Shipping Condition: Used Location: Evart, United States Removed from an Ashby Cross System.
Buy It Now
Condition: Used Location: Willoughby, United States YEAR 2000 . Ask for Bob Wells.
Buy It Now
Condition: Used Location: Westminster, United States In excellent clean condition. 200 liter with agitator.
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED 300 GALLON STAINLESS STEEL TANK TOTE IBC, BOTTOM OUTLET, TOP MANWAY, THE UNIT NEEDS CLEANED! TEEL TANK TOTE IBC, BOTTOM OUTLET, TOP MANWAY, THE ... moreUNIT NEEDS CLEANED!
Buy It Now
Condition: Used Location: Cedarburg, United States Lightning Mixer. International Production Specialists Steel Mixing Tank. Capacity: 850 Gallons. Tank Height: 4'. Steel Construction. 40" Width.
Buy It Now
$750.00 Shipping Condition: Used Location: Rosharon, United States This stainless tank is a reliable investment for any business in need of process engineering equipment. Its durable construction ensures longevity and ... moreefficient performance, making it a solid choice for various industrial applications. The tank is suitable for water, chemical, oil/fuel , metalworking, and manufacturing operations, as well as other process engineering needs. Its brand reputation and quality materials ensure that it is a valuable asset to any workspace.
Buy It Now
Condition: Used Location: Fleetwood, United States Warranty Information different condition than stated in the ad. If your item is. received in a different condition than stated (DOA, not. When we receive ... morethe product we will confirm item is. Let us know what’s going on. ).
Buy It Now
$1500.00 Shipping Condition: Used Location: Plattsburgh, United States CIP CLEAN IN PLACE PROCESS EQUIPMENT STATION CLEANING MACHINE WITH 2 TANK. CIP CLEAN IN PLACE PROCESS EQUIPMENT STATION CLEANING MACHINE WITH 2 TANK. ... more3 BUTTERFLY PNEUMATIC VALVES, 1 PANEL VIEW OVERALL DIMENSIONS ARE: 24'W X 36'L' X 90'H Clean-in-place( CIP) is a method of cleaning the interior surfaces of pipes. Vessels, process equipment, and associated fittings. Without disassembly. The benefit to industries that use CIP is that the cleaning is faster. Less labor-intensive and more repeatable, and poses less of a chemical exposure risk to people. CIP started as a manual practice involving a balance tank, And connection to the system being cleaned. Since the 1950s, CIP has evolved to include fully automated systems with. Multiple balance tanks, And specially designed spray nozzle systems. CIP is commonly used for cleaning bioreactors. Fermenters, mix vessels, and other equipment used in biotech manufacturing, pharmaceutical manufacturing and food and beverage manufacturing. CIP is performed to remove or obliterate previous Cell Culture batch components. It is used to remove in-process residues, control bioburden, and reduce endotoxin levels within processing equipment and systems. Residue removal is accomplished during CIP with a combination of heat, chemical action, and turbulent flow. The Code of Federal Regulations states“Equipment and utensils shall be cleaned. Maintained, and sanitized at appropriate intervals to prevent malfunctions or contamination that would alter the safety, identity, strength, quality or purity of the drug product beyond the official or other established requirements. Repeatable. Reliable, and effective cleaning is of the utmost importance in a manufacturing facility. Cleaning procedures are validated to demonstrate that they are effective, reproducible, and under control. In order to adequately clean processing equipment, the equipment must be designed with smooth stainless steel surfaces and interconnecting piping that has cleanable joints. The chemical properties of
Buy It Now
Free Shipping Condition: New Location: Ripplemead, United States Ready to use kit includes: -28 Gal. tote tank with large, durable handle, oversized wheels, tank rinser and ladder hook. 15 female-to-female orange Rhino ... moregreywater hose - 3 in. Portable Holding Tank.
Buy It Now
Condition: Used Location: Willoughby, United States Ask for Bob Wells.
Buy It Now
Condition: New Location: Apollo, United States Balance Tank Job #: BT-1001. Year of Mfg: 2013-14.
Buy It Now
Condition: Used Location: Middletown, United States
Buy It Now
Free Shipping Condition: New Location: Minooka, United States PARKER 934331T. They can also be used to replace existing filters that are no longer active. Filters should be changed when the desiccant color has changed ... morefrom blue to pink. Desiccant Breather,3 Micron,1" NPT.
Buy It Now
Condition: Used Location: Willoughby, United States Ask for Bob Wells.
Buy It Now
Condition: Used Location: Louisville, United States The Thermco gas mixer is designed to mix two non-flammable and non-corrosive gases. These accuracies are presented as typical performance for these systems. ... moreBecause the gas mixer uses a surge tank design, this type of system is ideal for applications that require maintaining a precise proportion from full mixed gas flow down to zero flow.
Buy It Now
Condition: Used Location: Willoughby, United States A & B PROCESS SYSTEMS, MODEL #RETENT TANK, SERIAL #70124301, 200 LITER, MADE 07/07, Stainless steel.
Buy It Now
Condition: Used Location: Willoughby, United States One bad wheel.
Buy It Now
$66.55 Shipping Condition: New Location: Laredo, United States Introducing the Olaer Bladder Accumulator Tank 108610-05200-05, a reliable and top-performing equipment that is perfect for your process engineering needs. ... moreCrafted by one of the most trusted brands in the market, this accumulator tank is designed to deliver high-quality and efficient results for your business and industrial requirements. This tank has a volume capacity of 1 liter. And a mass of 6 kg. These tanks are new and are not in original packaging.
Buy It Now
Condition: Used Location: Houston, United States Approx 8000 gal SS flash tank, approx. 10’dia x 14’H with inspection ladder, legs support, process sensors attached to the tank, top MH. Freight and Local ... morePickup Available, Rigging Fees May Apply. INV#: HO-1187C.
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED 300 GALLON STAINLESS STEEL IBC TOTE TANK, TOP MANWAY, BOTTOM OUTLET, #1013.
Buy It Now
$1500.00 Shipping Condition: Used Location: Plattsburgh, United States CIP CLEAN IN PLACE PROCESS EQUIPMENT STATION CLEANING MACHINE WITH 2 TANK SS. CIP CLEAN IN PLACE PROCESS EQUIPMENT STATION CLEANING MACHINE WITH 2 TANK ... moreSS CIP CLEAN IN PLACE PROCESS EQUIPMENT STATION CLEANING MACHINE WITH 2 TANK STAINLESS STEEL, OVERALL DIMENSIONS ARE: 24'W X 36'L' X 62'H Clean-in-place( CIP) is a method of cleaning the interior surfaces of pipes. Vessels, process equipment, and associated fittings. Without disassembly. The benefit to industries that use CIP is that the cleaning is faster. Less labor-intensive and more repeatable, and poses less of a chemical exposure risk to people. CIP started as a manual practice involving a balance tank, And connection to the system being cleaned. Since the 1950s, CIP has evolved to include fully automated systems with. Multiple balance tanks, And specially designed spray nozzle systems. CIP is commonly used for cleaning bioreactors. Fermenters, mix vessels, and other equipment used in biotech manufacturing, pharmaceutical manufacturing and food and beverage manufacturing. CIP is performed to remove or obliterate previous Cell Culture batch components. It is used to remove in-process residues, control bioburden, and reduce endotoxin levels within processing equipment and systems. Residue removal is accomplished during CIP with a combination of heat, chemical action, and turbulent flow. The Code of Federal Regulations states“Equipment and utensils shall be cleaned. Maintained, and sanitized at appropriate intervals to prevent malfunctions or contamination that would alter the safety, identity, strength, quality or purity of the drug product beyond the official or other established requirements. Repeatable. Reliable, and effective cleaning is of the utmost importance in a manufacturing facility. Cleaning procedures are validated to demonstrate that they are effective, reproducible, and under control. In order to adequately clean processing equipment, the equipment must be designed with smooth stainless steel surfaces and interconnecting piping
Buy It Now
Condition: New Location: Albany, United States NO NAME STAINLESS STEEL MIXING TANK JACKETED OPEN-TOP APPROX. DIA. OF TANK INSIDE TO INSIDE: 12" APPROX. DEPTH OF TANK: 16-1/2" APPROX. U.S. ... moreGALLON CAPACITY: 8 BOTTOM DRAIN INLET AND OUTLET: 1" NPT NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need
Buy It Now
Condition: Used Location: Middletown, United States
Buy It Now
Condition: Used Location: Middletown, United States
Buy It Now
Condition: Used Location: Caddo Mills, United States Crepaco 1,000 Gallon Stainless Jacketed Process Tank. Side Jacketed. Stainless Baffle Plate. Stainless construction. Stainless Ladder. Stainless Agitator ... moreBridge Mount. Sweep Agitation - NO DRIVE MOTOR.
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED 300 GALLON STAINLESS STEEL HAMILTON DOUBLE MOTION MIXER, JACKETED TANK. IF YOU LOOK AT IT YOU CAN SEE IT HAS BEEN WELDED ON! Ask for Bob Wells.
Buy It Now
Condition: Used Location: Painesville, United States 100 gallon Union Process Attritor, Stainless Steel, Jacketed. » One (1) used 100 gallon Union Process Attritor. » Stainless steel jacketed tank. » Size: ... more100S. » Tank is clean and ready for mixing. » Removble split top tank cover.
Buy It Now
Condition: Used Location: Caddo Mills, United States 30 Gallon Stainless Balance Tank. Stainless Construction. Stainless Hinged Lid. 9” Stainless legs.
Buy It Now
Condition: Used Location: Willoughby, United States TOP MANWAY AND BOTTOM OUTLET. LEE CHERRY BURRELL BOILER PROCESSOR.
Buy It Now
Free Shipping Condition: New Location: United States Our polyethylene resin complies with U.S. Food and Drug Administration regulation for storage of potable water. These tanks are for water storage only. ... moreDesigned for storing potable water. Nominal Tank Capacity (gallons): 300 gal.
Buy It Now
$750.00 Shipping Condition: Used Location: Rosharon, United States Stainless Steel 3 Blade Mixing Propeller 11 X 11 Mixer Tank Liquid Agitator Click to Enlarge Click to Enlarge- Stainless Steel 3 Blade Mixing Propeller ... more11 X 11 Mixer Tank Liquid Agitator Offered is a three blade stainless boat propeller marked"11 x 11" and"3_04" and the letter"A" Unit has a 1- 1/4" straight bore and secures to propeller the shaft with two large Allen style set screws(about 3/8" at 90° to each other. Propeller is in superb condition; metal has darkened but the propeller looks unused. There is no corrosion or damage and item is suitable for use or as a nautical display. Item is warranted to be as described and sells with no reserve. COPYRIGHT NOTICE- All content seen here. Including: HTML coding, photos, artwork, and text content is copyright protected as intellectual property and may not be used without written permission from its owner. I have additional related professional grade and collectable tools at auction and will gladly combine orders to save on shipping cost. SKU 8E033-AL- As 7 12.95 flat- SORRY. NO INTERNATIONAL TRANSACTIONS- BY BIDDING ON THIS ITEM YOU AGREE TO THE FOLLOWING TERMS: 1) Buyer pays $12.95 shipping/ handling to anywhere in the US. 2) Ins is NOT INCLUDED unless stated otherwise. 3) Item is warranted to be as described. 4) Major credit cards via PAYPAL 5) Alternative payment options may be available; please email for current information 6) Invoice will be sent shortly after close of auction; payment remittance expected within four calendar days of auction closing. Please contact me if you need special arrangements. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Buy It Now
Condition: New – Open box Location: Middletown, United States
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED APPROX. Ask for Bob Wells.
Buy It Now
Condition: Used Location: Canada One used 6000 gallon Letsch Mix Tank. 304 stainless steel construction, dished top and bottom, top mounted 7.5 XP Lightnin agitator drive with two tier ... morefour blade pitched turbine agitator, on legs. We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical. Chemical And Plastic machinery. All auctions are subject to prior sale. You can email us your questions or check our website clevelandprocessequipment.com
Buy It Now
Condition: Used Location: Morgantown, United States Pulse generator. Up to 30 lbs per minute flow. This unit was built and installed but never put into production. Barrier fluid tank 1000 Pulses per revolution. ... moreWeight: 1.0000 Lbs. Miller Fluid Power Series H p/n SR-H-SF-675-2-N-4-20-1 3/4-3000-DA.
3d 1h 42m 56s 0 bids
$4900.00 Now
Condition: Used Location: Dayton, United States (one) Stainless steel processing tank, 304 stainless steel, approx. There is a 1/4" thick baffle, 24" high that is mounted midway between the left and ... moreright end. Each side of the tank has a 4" sanitary drain near the center.
Buy It Now
Condition: Used Location: Painesville, United States » Output speed is 1725 - No gear reduction from motor to output. » Motor has been test run and sounds good.
Buy It Now
Condition: Used Location: Gardner, United States It is a used item, but its condition is excellent and it has been well-maintained.
Buy It Now
Condition: Used Location: Aiken, United States
Buy It Now
Condition: Used Location: Caddo Mills, United States 200 Gallon Stainless Product Feed Tank with Coned Bottom. Coned Bottom. Minor dings on interior from an agitator coming free during operation. Stainless ... moreConstruction. Stainless Removable Lid.
Buy It Now
Condition: Used Location: Aiken, United States 2000 Gallon Stainless Steel Mixing Tank 14’ over all height X 80”Dia, 8’ side wall 3HP Mix lightnin mixer model. 12” cone Bottom Center 2.5” Outlet, slope ... moreBottom to center drain. Open top, Bridge mounted mixer.
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED 1250 LITER STAINLESS STEEL TANK, TWO TOP MANWAYS, BOTTOM OUTLET.
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED 700 GALLON STAINLESS STEEL DIMPLE JACKETED TANK WITH TOP ENTERING DISPERSER AGITATION. #1 WE HAVE TWO OF THESE UNITS. Ask for Bob Wells.
Buy It Now
Condition: Used Location: Willoughby, United States A&B PROCESS SYSTEMS 150 GALLON JACKETED TANK W/ RACKING. Job #: 083. Condition: USED, "AS-IS". Category: TANKS. Weight: 816 LBS.
Buy It Now
Condition: Used Location: Willoughby, United States Ask for Bob Wells.
Buy It Now
Condition: Used Location: Millwood, United States 20HP TEFC Disperser Motor with Belt Drive. 2" Disperser Shaft, Bearings w/Dust Seals, 1". Hi Viscosity for pastes. 200 Gallon Dual Shaft Mixer Vessel, ... more40" OD, 48". DS4 Mixer Lift Assembly, 10 HP TEFC Anchor.
Buy It Now
Condition: Used Location: Willoughby, United States STAINLESS STEEL TANK WITH A SLANT BOTTOM AND SEVERAL OUTLETS, ON S/S LEGS, ON WHEELS.
Buy It Now
Condition: Used Location: Willoughby, United States ONE USED CHERRY BURRELL 300 GALLON STAINLESS STEEL JACKETED MIX TANK, HINGED LID, LIGHTNING TOP MOUNTED AGITATOR. Ask for Bob Wells.
Buy It Now
Condition: Used Location: Romeoville, United States YOU ARE BUYING ONE ALLOY PRODUCTS INC SANITARY STAINLESS STEEL PRESSURE VESSEL TANK 50 LITER 125 MAWP PSI. TOP CONNECTIONS ARE AS FOLLOWS: QTY 3) 1-1/2" ... moreOD FLANGE. QTY 1) 4" CENTER) OD FLANGE. NO SIGHT GLASS IS PROVIDED. YOU ARE BUYING EXACTLY WHAT IS PICTURED. THIS IS USED SURPLUS FROM A SHUT DOWN BAYER PHARMACEUTICAL FACILITY AND IS GUARANTEED CLEAN AS PICTURED. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. TW30) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
Buy It Now
Condition: Used Location: Madawaska, United States 100L VESSEL. MATERIAL : DIN 1.4435 316L STAINLESS STEEL. SANITARY TRI-CLAMP FOUR 3/4" PORT HEADPLATE WITH 1/2" PORT CENTRAL HARVESTING TUBE. TWO 30.375" ... more(FROM TANK FITTING TO TUBE END) STRAIGHT DIP TUBES WITH 90 º 1/2" TRI-CLAMP PROCESS FITTINGS.
Buy It Now
$3500.00 Shipping Condition: New Location: China We are the unique factory in China.that can produce high speed Linear PET/ PE bottle Automatic unscrambler machine. we produce the feeder for 20 years.it ... moreis designed and manufactured ourselves based on Italy advanced technology in the beverage producing field.
Buy It Now
$3000.00 Shipping Condition: Used Location: Rosharon, United States Please note: We will not be able to answer your questions on Sep. 16– 21. Sep. 27– 28, Oct. 3– 11 We will not ship merchandise on Sep. 28. Oct. 3– 11- ... moreClick an Image to Enlarge SKU:DIV1090SS. Mfr. Part:BC1090-SS. 39.95. Dive-Rite Stainless Steel Single Tank Adapter. Plate#1090-S/S. New size! Our SMP has been re-sized to fit squarely in the opening of our TravelEXP and Voyager EXP wings. For divers who frequently switch between double tank and single tank rigs. Our single tank adapter is a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Constructed of marine grade 304 stainless steel. Note: Singles Mounting Plate(SMP) does not include cam straps. 13-in x 3 3/8-in(33 cm x 8.5 cm) as of 2012 1.1 lbs(17.6 oz) To avoid unnecessary wear and tear. Remove metal backplates and singles mounting plates from the wing for transport and do not carry a metal plates stuffed into a dive bag along with a wing and other soft goods. Feedback is a very powerful tool. It gives sellers a reason to conduct business at the highest level of honesty& respect. If you feel like you have a reason to leave neutral or negative feedback. Please contact us beforehand. I’m sure we can work it out 800-637-6880. Many years ago Leisure Pro was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment. Thousands and thousands of satisfied customers swear by our service. Got a question? Toll free: 800-637-6880. Hours: Mon-Thu: 9:30-5:30. Friday: 9:30-12:30. Please do not request to have an item relisted if you do not see it any more. If we are able to relist. We will do so even without your request. We will only post items that are in stock. Ready to ship. Paypal is our only method of payment. When you are using Paypal. You must go through our secure verification system, for which you will have to supply a verified shipping address with a matching telephone number. For shipments in New York. We are required to collect th
|
|
|
|
300 Gallon Stainless Dimple Jacketed Process Tank, Mfg by Will Flow
300 Gallon Stainless Dimple Jacketed Process Tank Mfg by Will Flow NB# 665 Serial#5546-2 Dimensions: 42" dia x 46" Sidewall Dimple Jacketed Jacket rated 50 psi@ 300^ F Shell& Head thickness.109 Open top w/ SS Lid Capacity: 300 gallons Slopped bottom for full drainage 2" discharge. SS NPT fitting 6" legs Jacket Tested Functional Just removed from production Excellent condition For more information: EMAIL CALL Kevin at(903) 355-1409
|
|
|
Stainless steel floating lid for process tank
Like new stainless steel floating lid for a processing tank as shown in photo. This lid was made to fit a 3 gallon stainless steel tank. The dimensions are: 10 7/8 in by 4 1/4 in by 1 inch.
|
|
|
Process Technology over the side Immersion Tank Heater, Model # P2117-PI
Hi there! Today I offer for auction this gently used. Made in the USA, Process Technology's over the side immersion tank heater. This model(P2117-PI) is a 120 volt 2000 WATT heater and has a body length of about 16 inches. It was used for 17 months in an anodizing shop that I used to own. I used it in my black dye bath for coloring the aluminum parts after anodizing. It has been in dry storage for 7 years. It worked flawlessly when the anodizing line was dissasembled. It is in good condition. It comes complete with a lead for the heater control box(which I'll list shortly in another auction) For reference, this particular heater is the one 2nd from the left in the photo which shows all of my equipment for sale. This auction is for ONE heater, not the lot. This item is already packaged and ready for shipment. Thanks for looking and ... morehappy bidding!
|
|
|
DCI Inc. 300 LITER BIO-REACTOR 316 STAINLESS STEEL PROCESS TANK W/ EXTRAS
YOU ARE LOOKING AT A DCI Inc. 300 LITER BIO-REACTOR 316 STAINLESS STEEL PROCESS TANK W/ EXTRAS. MAX WORKING PRESSURE FOR THE TANK IS 4 5 PSI@ 300 ºF AND FOR THE JACKET IS 125 PSI. You will get everything you see in the photos. Nothing more or less. Please see all photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 06-CW4470B CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges ... moreor returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it
|
|
|
USED 5000 GAL. PROCESS WATER - CONDENSATE TANK - STAINLESS STEEL
ITEM# 11984 USED 5000 GAL. PROCESS WATER- CONDENSATE TANK- STAINLESS STEEL MANUFACTURED AND CERTIFIED BY WESTERMAN INDUSTRIES. BREMAN, OH. TANK MATERIAL: 0.1875" THICK SA240-304L STAINLESS STEEL, DISHED HEADS ARE ALSO 0.1875" THICK. TANK DIMENSIONS: 7'6"Ø O.D. X 15'0"L. CONTACT US FOR MORE INFORMATION. DESIGN PRESSURE: 5PSIG TO-0.5PSIG@ 200°F. FULL BANDED SADDLES ARE 1" PLATE A-36 STEEL. FRONT SIDE AND TOP MANWAYS WITH DAVITS. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire ... moretransfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Stainless Steel Tank / Laboratory Tank / CIP Tank / Process Tank with ESA 65-4
Stainless Steel Tank/ Laboratory Tank/ CIP Tank/ Process Tank with ESA 65-4. Stainless Steel Tank/ Laboratory Tank/ CIP Tank/ Process Tank with drain Pan and EL-O-MATIC ESA 65-4 valve and Float Valve with sight glass. Check valve, triclamp connections Removed from shut down pharmaceutical plant. Unit is untested and sold'as is' PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. IF YOU FEEL THE SHIPPING COST FOR INTERNATIONAL LOCATION IS TOO MUCH. CONTACT US AND WE CAN CHECK IF WE CAN RE-SIZE THE BOX TO LOWER THE SHIPPING COST. DON'T LET SHIPPING COST MAKE YOUR DECISION. CONTACT US AND WE WILL WORK WITH YOU AS MUCH AS WE CAN! WE ALWAYS USE YOUR PAYPAL ADDRESS AND INFORMATION TERMS OF SALE Some items ... moreare offered“Used-As-Is” UNLESS IT’S NOTICED. This does not mean that the item does not work; it just means that we have not run this item in production ourselves and we don’t have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US. Good relationship If there are any problems with your order. Please contact us. We will work with you to resolve any issue as quickly as possible. We want customer 100% satisfaction! Launched from my store- Powered by
|
|
|
Mueller 1,000 gallon stainless laboratory process tank,awesome cond INV=90082
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Mueller 1.000 gallon stainless laboratory process tank. It was used by an international corporation making contact lenses. Pristine condition tank, always kept inside. I looked inside. This tank is completely clean, empty, and dry inside. Looks like it was professionally cleaned out in accordance with regulations, by a deep pocketed international company that closed the location where this tank is located. I am a machinery mover and I can deliver to your location near Chicago for an additional $$$$$. No foreign bidders. No exceptions. NO CANADIANS. This item ships by Freight(by truck) It cannot be shipped by UPS or USPS. This item does NOT offer free shipping. If you need to discuss shipping prior to bidding. Call me at 63O-235-66O3. Please do NOT pay until you discuss shipping ... morewith me and I invoice you. The buyer has three options: Free pick-up at my location in Berkeley. IL, 60163, I can get a freight quote and charge you my cost of freight and arrange shipping. You can arrange shipping with your own freight company. To whom you would pay. It needs to have electronic tracking capability to comply with PayPal requirements. Title and risk passes to buyer at pick-up. I will also charge you a palletizing charge. Charge is $15 for a regular pallet and more for custom pallets. Any crating beyond just banding to a pallet will incur an additional cost to buyer. I never ship for free and I do not consider any offers that demand free shipping. Our friends can move your machinery or remove obsolete equipment. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There i
|
|
|
A&B PROCESS SYSTEMS 500 VSST 500 Gallon Ozone Contact Tank
A&B PROCESS SYSTEMS 500 VSST 500 Gallon Ozone Contact Tank Vertical ozone contact tank mounted on(4) stainless steel legs. Bottom side manway. Approximately 3' diameter x 6' straightwall x 10'6" overall height. SMB ID: 6301 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14525de3be5-0x111-
|
|
|
Chery-Burrell Jacketed Process Tank SS
Cherry Burrell jacketed stainless steel food and cosmetic grade process tank Dished top and bottom ID 36 inch Strait side 42 inch Jacket rated 75 PSI at 320F National board number 1970 2 inch bottom drain 18 in top covered man way Please see picks Unit will ship LTL. We can load Please see all pics More info call Paul 864-205-3333 Posted with
|
|
|
1500 GALLON A&B PROCESS MIX TANK S/S AGITATED
One used 1500 gallon A&B Process Systems mix tank. Stainless steel construction, dished top and bottom, 5hp top mounted agitator drive with three tier 4 blade pitched blades, on legs. We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical. Chemical And Plastic machinery. All auctions are subject to prior sale. You can email us your questions or check our website clevelandprocessequipment.com
|
|
|
Glass lined process tank 500 gallons
Used 500 gallon glass lined tank. It has some chips in the glass and rust spots showing. We have dock height loading docks to load onto your choice of shipping carriers truck. If you pick up locally you will need a truck that is dock height. We do not have provisions to load into anything smaller or outside.
|
|
|
Perry Products 304 Stainless Steel 200 Gallon Process Mixing Tank 14" Top Port
Perry Products 304 Stainless Steel 200 Gallon Process Mixing Tank 14" Top Port THIS PROCESS MIXING TANK IS USED. BUT APPEARS TO BE IN FAIR CONDITION. IT HAS A 14" PORT ON THE TOP. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: Model# NA APPROXIMATE PRODUCT DIMENSIONS: WIDTH: 38" LENGTH: 38" HEIGHT: 68" SHIPPING WEIGHT: 265 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER ... moreIS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST
|
|
|
625 Gallon Jacketed Process Tank
625 Gallon Jacketed Process Tank 625 gallon stainless steel jacketed and insulated tank with 84"straightwall X 52"diameter. Flat top with hinged cover. Dished bottom with tri-clamp outlet. Inlets-3- 1 1/2" tri clamp. 1-2" tri clamp, 2-2 1/2" tri clamp, 1-3 1/2" tri clamp, 2-3" tri clamps. Outlets-2" tri clamp on side, 4" on bottom. Tank has split top lid, 4 SS legs and spray ball for CIP. Doesn't have agitator. Tank has 2- 1 1/2" tri clamps on the side for sight glass but no sight glass installed. Overall dimension: 124"tall X 65"diameter. SMB ID: 10250 We can provide a freight quote or load onto your truck at our warehouse. Equipment Sales are As-Is. This item has not been tested. SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore Can't ... morefind what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited to: Motors Blowers Pumps Gearboxes Electrical Controls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 7am-5pm EST Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Stainless Steel Cylindrical Tank * 50 gallon * Sanitary Grade * A&B Process
Stainless Steel Cylindrical Tank* 50 gallon* Sanitary Grade* A&B Process Stainless Steel Cylindrical Tank* 50 gallon* Sanitary Grade* by A&B Process Description: 2002 A&B Process 50 Gallon Capacity Stainless Steel Cylindrical Tank. D.P. PSIG: 14.5/FV(Full Vacuum) DT °F: 200. To Include Kunkle Brand Pressure Relief Valve. Top Mounted, Inlets And Outlets Are Sanitary I-line Connections, Cone Bottom, Tank Spud Fitting For Rosemount Brand Level Transmitter. Transmitter Not Included) Approximate Tank Dimensions 17 OD x 60 Tall(Tank Only. Not Including Legs) Legs Range From 48" To 12" Long See photos for more details/information. Item comes as pictured. With no other parts or accessories included. We accept PayPal. Payment is due within 3 days of purchase. FL residents must pay sales tax. Buyer is to pay shipping unless ... moreauction states otherwise. Please message us directly through eBay messages if you have any special shipping requests or would like us to know something before shipping out your item. Please note that we do not use customer's personal or business shipper account numbers in place of our own to ship items. If you need an item overnighted. Please let us know before you pay so we can adjust the shipping cost and invoice you accordingly. We will combine shipping when purchasing multiple items. The combined weight and cost is automatically calculated by eBay. Items are typically shipped within 1 business day of receiving payment. We ship out items Monday-Friday(excluding holidays) Items paid for on Friday will likely be shipped the following Monday. We ship the item(s) only to the address that PayPal gives us. So please make sure your information is up to date with them before bidding. Freight shipping is to be paid for and arranged by the buyer. If you need assistance. We are more than happy to help with the arrangements. Items stating that they will ship USPS Parcel Post may actually ship via Fed Ex Ground. Shipping fees are not refundable. We strive to describe the items we li
|
|
|
BULLING METAL WORKS STAINLESS PROCESS TANK
1-LIKE NEW. BULLING METAL WORKS PROCESS TANK, APPROX. 100 LITER TYPE 316 STAINLESS STEEL, SANITAIRY BIOREACTOR/FERMENTER, DISH TOP AND BOTTOM, APPROX. 20”DIA X APPROX. 28” TALL. PRESSURE/VACUUM RATED. INTERNAL CHILLER COIL, MULTIPLE SANITARY OUTLETS ON REMOVEABLE TOP LID, INCLUDES INSTALLED SANITARY VALVE ON BOTTOM. TANK IS ON TUBULAR LEGS WITH CASTERS FOR PORTABILITY.
|
|
|
Scherping 50 Gallon Jacketed Process Tank
Scherping 50 Gallon Jacketed Process Tank Model FBP-50 s/n 940065003-2(1994) 80 psi@ 300 F. 24" I.D. X 29" deep 2" and 2-1/2" bottom outlets Jacket connections are 1" threaded Has sprayball and hinged lids Last used in the Dairy Industy All Stainless Steel Sanitary Construction
|
|
|
STAINLESS TECH 100 LITER JACKETED PROCESS TANK W/ AGITATOR & GAUGES 60 PSI
YOU ARE LOOKING AT A STAINLESS TECHNOLOGY 100 LITER JACKETED PROCESS TANK W/ BOTTOM AGITATOR& GAUGES. MAX WORKING PRESSURE FOR THE TANK IS 60 PSI@ 275 ºF. This tank features a burst valve. Level indicator, Side ports as well as top ports, Variable Controller and Drain Valve. You will get everything you see in the photos, nothing more or less. Please see all photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 0115-SS3908SYL CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that ... morewas offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item
|
|
|
Walker 7,000 gallon Sanitary Jacketed Process Mix Tank w full Sweep Agitation
Walker 7.000 gallon Sanitary Jacketed Process Mix Tank w full Sweep Agitation used Walker approx. 7000 gal Sanitary. Jacketed Process Mix Tank, model VHT3459R. s/n 9186. Jacket rated 75 PSI and has 417 Sq.Ft area. Dome top, Cone Bottom. With top mounted full sweep mixer, top manhole opening, 15 HP, 1750, 230/460 volt motor into gear box. Also has a Leeson adjustable speed AC motor control. Please contact Frank at cell or Text 856-491-0637 Email Frankb@ecrecon.com We are in front of the equipment daily and can assist with pictures. Measurements or other details. Contact us anytime, day or night with questions about this piece or any you may find interesting in our inventory. You may be interested in. MACHINE SAFETY: It is the users responsibility to provide proper saftety devices. Procedures and equipment to safegaurd the machine, or machines, ... moreto conform to Federal, State and Local Government Saftey Standards and all Industry Safety Standards. Indemnification: High Bidder/Buyer Agrees to Idemnify and hold harmless Seller of and from any and all claims or liabilities, warnings, or recommendations available from the original manufacturer, or by failure of the user to comply with Federal, State, and Local Laws applicable to such equipment including the Occupatioal Safety and Health Act of 1970. The high bidder agrees to there terms and conditions! Thank You! Price and Availbility are subject to change without notice!
|
|
|
Sanitary process tank , 75 gallon , internal heat exchanger
one) Sanitary process tank. 35" x 30" x 18" stainless steel, flat top, slanted bottom with 2 ½" sanitary fitting at bottom end. 2) 10" round sanitary side access holes, 1) 8" x 8" grated top opening. Flat gasketed, bolted top. Built in, top mounted level switch. 1" and 1 ½" sanitary ports near top on end. 2) tubular sanitary internal heat exchanger bundles. Each heat exchanger head has(1) 1" sanitary inlet port and(1) 1" sanitary outlet port. The internal tubes measure ¾" 1) ¾" sanitary thermocouple fitting. This was used as part of a pharmaceutical glassware washer. $245 shipping in the continental U.S. You can send text messages to my cell phone at 9374165497@vtext.com D-12379, 80, 81, 82, 83 If you have any questions. Please email me! Happy bidding! Click ... moreto View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $245.00 by truck International Shipping. $1200.00 by air to airport FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
40 GALLON STAINLESS STEEL STORAGE PROCESS TANK WITH LID
40 GALLON STAINLESS STEEL STORAGE PROCESS TANK WITH LID. 40 gallon storage or process tank. Stainless steel construction, overall dimensions 33in diameter by 44in high, 1.5in bottom discharge tri-clamp, includes lid with handle. Inventory RESS-015 PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. IF YOU FEEL THE SHIPPING COST FOR INTERNATIONAL LOCATION IS TOO MUCH. CONTACT US AND WE CAN CHECK IF WE CAN RE-SIZE THE BOX TO LOWER THE SHIPPING COST. DON'T LET SHIPPING COST MAKE YOUR DECISION. CONTACT US AND WE WILL WORK WITH YOU AS MUCH AS WE CAN! WE ALWAYS USE YOUR PAYPAL ADDRESS AND INFORMATION TERMS OF SALE Some items are offered“Used-As-Is” UNLESS IT’S NOTICED. This does not mean that the item does not work; ... moreit just means that we have not run this item in production ourselves and we don’t have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US. Good relationship If there are any problems with your order. Please contact us. We will work with you to resolve any issue as quickly as possible. We want customer 100% satisfaction! Launched from my store- Powered by
|
|
 |