|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Willoughby, United States FOR SALE 500 LITER IBC STAINLESS STEEL BINS TOTE MADE BY ACE ALLIANCE,, CENTER BOTTOM OPENING, INSIDE AND OUTSIDE FINISH IS 240 GRIT. Ask for Bob Wells.
Buy It Now
Condition: Used Location: Sun Valley, United States
Buy It Now
Condition: Used Location: Sun Valley, United States This item is as seen in pictures. If the item is listed as working, then it was tested to the best of our ability.
Buy It Now
Condition: Used Location: Sun Valley, United States
Buy It Now
Condition: Used Location: Pedricktown, United States 316L Stainless Steel. Lug mounted. S/N 93PH47081B. Last used in Pharmaceutical Application. Price and availability are subject to change without notice. ... moreAll machines are listed "as is".
Buy It Now
Condition: Used Location: Sun Valley, United States You will get everything you see in the photos, nothing more or less. We can provide you with a freight quote or you can send your own transportation to ... morepick-up the tank. If the item is listed as working, then it was tested to the best of our ability.
Buy It Now
Condition: Used Location: Tacoma, United States Tank Wall and Cone Fully Insulated with Low-Chloride Insuation with. Gauge and Port, Vacuum Pressure and Relief Valve, (2) Jacket Ports. Constructed of ... moreAISI304 Stainless, Food Grade 30. Single Zone Dimple Jacket Cylinder Cooling.
Buy It Now
Condition: Used Location: Sun Valley, United States
Buy It Now
Condition: Used Location: Cleveland, United States
Buy It Now
Condition: Used Location: Willoughby, United States ARDETH STAINLESS 500 SS GALLON TANK W/ 3 HP AGITATOR. 2000 LITER. Model: 1HTNS-3 (AGITATOR). Material: 304 SS.
Buy It Now
Condition: Used Location: Willoughby, United States Ask for Bob Wells.
Buy It Now
Free Shipping Condition: Used Location: Newbury Park, United States
Buy It Now
Condition: Used Location: Pedricktown, United States Used Laboratory Centrifuge. Floor Model Centrifuge. Up to 22000 rpm/49300 xg/3 liters Ultrac Adapter Rotor Systems Large capacity bottles 250-500 ml: ... moreConical tubes 15, 50, 175/225 ml Microtubes Filtration devices.
Buy It Now
Free Shipping Condition: New Location: Nh-4 Faridabad S.O, India Heating or Cooling Jacket for Ribbon Blender. Full Capacity In Liter: 600 Liter. Mixing Capacity 500 Liter. We will Dispatch Machine after Sending all ... moreMachine Pictures & Video when you will be Satisfy Then We Will Dispatch Machine.
Buy It Now
Condition: Used Location: Chico, United States The unit is designed on castors and compact for the lab. Using engineering principles and technology, we designed this unit to be scalable to larger models. ... moreNet weight 310 Kg. Noise Less than 63 dB.
Buy It Now
Condition: Used Location: Willoughby, United States FALCO 50 LITER STAINLESS STEAM JACKETED MIXING TANK. Type: STEAM JACKETED TANK. Category: TANKS.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 220911 NEW Air Oil Filter Compressor Screw IR GD 220 911 Atlas Capco Bottarini GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6211472250 NEW Air Oil Filter Compressor IR GD Atlas Capco chicago pnoematic GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 4002.3102.2 NEW Air Oil Filter Compressor IR GD Atlas Copco Flottman 400231022 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
Condition: Used Location: Fall River, United States MILLIPORE MOBIUS MIX500 SYSTEM 500 liter POLY VESSEL. Catalog no. MIX0500LG05, 500 liter poly tank on wheels. It has a side door with a sight glass and ... morea rectangular opening under. There are (2) round openings in the bottom with a slot connecting them.
Buy It Now
Free Shipping Condition: New Location: Faridabad Sector 16a S.O, India Ribbon Blender 500 Liter. Solid Stainless-Steel Shaft : 70 MM. OPTIONAL: LIQUID SPRAY SYSTEM. · High Strength Gland Seal. optional Heating Jacket. Motorized ... moreOr Pneumatic Operated Butterfly Valve or any Other Valve.
Buy It Now
Free Shipping Condition: New Location: Faridabad Sector 16a S.O, India Heating or Cooling Jacket for Ribbon Blender. Full Capacity in Liter: 600 Liter. Mixing Capacity 500 Liter. OPTIONAL: LIQUID SPRAY SYSTEM. Solid Stainless-Steel ... moreShaft : 70 MM. High Strength Teflon Or Gland Round Seal.
Buy It Now
Free Shipping Condition: New Location: Faridabad Sector 16a S.O, India This stainless steel ribbon blender is a high-quality mixing machine made in India. With a capacity of 600 liters or 21 cubic feet, it is perfect for ... moreblending and mixing a wide range of materials. The unit type is a ribbon blender, which ensures efficient and uniform mixing of your products.
Buy It Now
Condition: Used Location: Oxnard, United States You are bidding on: 500 Liter Mobil Stainless Steel Tank on Wheels 30" x 48" If you want these items to be shipped you must contact us be fore ... morebidding! You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 7.75% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
Buy It Now
Condition: Used Location: Fremont, United States This Precision Stainless, Inc. Steel Mixer - 500Liter, 316L w/ PharMix Agitator is for sale. PharMix Agitator. Precision Stainless, Inc. Steel Mixer - ... more500 Liter, 316L w/PharMix Agitator. Steel Mixer.
Buy It Now
Condition: Used Location: Wilmington, United States Used Stainless Steel Double Cone Blender.
Buy It Now
Condition: Used Location: Hacienda Heights, United States Make the ultrapure water for lab or hospital use. Raw water pump. Food and beverage industry: filter for mineral water, wines and fruit juice. Usage: ... moreChemical Industry, Pure Water Drinking. Provide pressure for raw water.
Buy It Now
Condition: Used Location: Hiram, United States Fluitron Inc. 10 Liter Reactor Certification: Cryochem Inc. Shell/Jacket Certification: Certified by Fluitron Electrical Specs: 110Volts, 7.9amps, 60HZ ... moreShipping Dimensions: 48”L x 48”W x 68”H Weight: Approx. 750lbs Seller Note: Unit is USED. Some minor scratching/blemishes can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has not been tested at our facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.
Buy It Now
Condition: Used Location: Plant City, United States 1- Used Jacketed mixer jacketed cooler system.
Buy It Now
Condition: Used Location: Brisbane, United States Stainless steel 1,450 gallon (5,500 liter) insulated tank, previously used in beer processing, measures 60" diameter x 10' straight side, slight cone ... moretop and cone bottom. Bottom includes 1" diameter center bottom outlet. Top head includes 1" diameter center top inlet and lifting eyes. Includes side bottom 16" x 12" oval manway with cover and internal spray ball. Tank is mounted on (4) 4" diameter pipe legs with footpads. Manufactured by Nerb. Fabrication number 5486.
Buy It Now
Condition: Used Location: Carol Stream, United States Walker Portable Stainless Steel Tank. NOTE: Local pickup, FOB from our dock. Single Wall 316L S/S Construction. 150 Grit Electro Polish Interior.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 640608 NEW Air Oil Filter Compressor Screw IR GD Atlas Capco 640608 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1432197aadf-0x100-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 5220925060 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 4006.5104.2 NEW Air Oil Filter Compressor IR GD Atlas Copco 400651042 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 93522720 NEW Air Oil Filter Compressor IR GD Atlas Copco 9352 2720 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 521500 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 521500 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 5081732 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 5081732 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 92118678 NEW Air Oil Filter Compressor IR GD Atlas Copco 9211 8678 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1432197aaa1-0xec-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 00771036 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 0077 1036 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C11158-1775 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C 16012-215 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750558426 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 58 426 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States OC32 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air OC 32 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750559236 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 59 236 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 93568236 NEW Air Oil Filter Compressor IR GD Atlas Copco 9356 8236 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6211412000 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 48221000 Fini NEW Air Oil Filter Compressor IR GD Atlas Copco 48221000 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 2202260271 NEW Air Oil Filter Compressor Screw IR GD Atlas Capco 220 226 0271 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 43552 NEW Air Oil Filter Compressor IR GD Atlas Copco 43 552 Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 413 719 NEW Air Oil Filter Compressor IR GD Atlas Copco 413 719 Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 05500874 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 0550 0874 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 300487 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 300 487 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 2914-5050 NEW Air Oil Filter 29145050 Compressor Screw IR GD Quincy Atlas Capco GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750558425 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 58 425 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
|
|
|
|
500 Liter Mobil Stainless Steel Tank on Wheels 30" x 48"
You are bidding on: 500 Liter Mobil Stainless Steel Tank on Wheels 30" x 48" If you want these items to be shipped you must contact us be fore bidding! You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 7.75% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
500 LITER SFI STAINLESS STEEL BAG HOLDING TANK JACKETED & ON CASTERS MFG 2007
YOU ARE LOOKING AT A 500 LITER SFI STAINLESS STEEL BAG HOLDING TANK JACKETED& ON CASTERS MFG 2007. Unit was acquired from a local laboratory and was stored in a clean room. The entire unit is mounted on casters and includes a bottom drain. Side door. Please see photos for more details and condition. You can arrange your own shipping or we can provide you with a freight quote. 09-R0477SL CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that ... morewe do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the date you
|
|
|
Used- Glatt 500 Liter, 17.6 Cubic Feet Tote, Stainless
Thank you for your interest in Aaron Equipment Company. A leading provider of used and reconditioned process equipment. For more than 63 years, the Aaron Companies have supplied the processing industries with quality, new, used and reconditioned equipment and asset management services. Buying and Selling Process Equipment Made Easy! Used- Glatt 500 Liter. 17.6 Cubic Feet Tote, Stainless Steel. No valve or cover. Click on image above to see larger view. Description. Used- Glatt 500 Liter. 17.6 Cubic Feet Tote, Stainless Steel. No valve or cover. ref# 43753010. Contact Information. Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Shipping Policy. All items sold are FOB Bensenville. Il location unless otherwise noted. All items offered are subject to prior sale or ... moreother disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card. Additional Photos.
|
|
|
87017 Used- Precision Stainless Reactor, 500 Liter (132 Gallon), 316L Stainless
Used- Precision Stainless Reactor. 500 Liter(132 Gallon) 316L Stainless Steel, Vertical. 36" Diameter x 26" straight side. Dished top and bottom. Internal rated 100 psi at-20 to 300 deg F, 304L stainless steel dimple jacket rated 75 psi at-20 to 300 deg F. Off center, top entering, Ross mixer emulsifier model ME510, 10 hp motor. Openings: top(7) 2" tri-clamp, 6-1/2" tri-clamp, 2) 2-1/2" tri-clamp, 3) 3-1/2" tri-clamp, 16" manway with cover; 1-1/2" x 1" center bottom outlet. Mounted on 4 stainless steel legs. Approximate 26" discharge height. ref# 87017 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
45080008 Used- Lee Industries Pressure Tank, 500 Liter (132 Gallon), Model 500L
Used- Lee Industries Pressure Tank. 500 Liter(132 Gallon) Model 500L DBT, 316L Stainless Steel, Vertical. 40” Diameter x 24” straight side, dished top and bottom. Internal designed for vacuum service and rated 30 psi at-20 to 300 degree F. Top entering off center agitator with mechanical seal, approximate 1” diameter shaft, no blade and drive. Openings top(7) 1-1/2” tri-clamp, 3” tri-clamp, approximate 6” drive, 18” man way with cover. 2” Center bottom outlet. Mounted on 4 stainless steel legs with casters. Serial# 17676-1, National Board#8597, built 2001. ref# 45080008 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
132 gallon 500 Liter 316L Stainless Steel Jacketed Reactor PressureTank
J. Little Mercer Co. Inc. NEW LOWER PRICE J. Little Mercer Co. Inc. Data for equipment E-2871 500 Liter SS REACTOR Printed Sunday June 21. 2010 3:04 PM Model/serial no. 87PH35867F.1988 Manufacturer DCI Inc(Dairy Craft Inc. Dimensions 36" x 36" w/db& dt(bolted) Construction/configuration 316L ss vertical. Dimple jacket Code/N.B. 1095 PSI:Jkt:in 30/15 psi@ 300 F shell. 100 psi@ 300 F jkt. Inlets/outlets ti's=(2)2"2)1.5"4)4"3"3"tci, 3" bottom center outlet NO VALVE! General data(5)2"si/o.2" 1" ji/o. Excellent! Drive 2.5 gallon jkt. volume EXCELLENT! Priced without a mixer! Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure ... moreyou the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. Auction is for vessel only. Jacket guaranteed to hold pressure.
|
|
|
PRECISION STAINLESS STEEL TANK 500 LITER W/ PRESSURE LID ON CASTERS MIXING TANK
YOU ARE LOOKING AT PRECISION 316 STAINLESS STEEL TANK 500 LITER W/ PRESSURE LID ON CASTERS MIXING TANK. You will get everything you see in the photos. Nothing more or less. Please see photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 06-CV1320D CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the ... moreequipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the date you receive the item or i
|
|
|
45396022 Used- Allegheny Bradford Reactor, 500 Liter (132 Gallon), 316L Stainles
Click To Enlarge- Used- Allegheny Bradford Reactor. 500 Liter(132 Gallon) 316L Stainless Steel, Vertical. 30" Diameter x 45" straight side, dished clamp top, dished bottom. Internal rated 50 psi and Full Vacuum at-20 to 302 degrees F. 304L Stainless steel dimple jacket rated 100 psi and Full Vacuum at-20 to 302 degrees F. Openings top(3) 1-1/2" 2) 2" 3" 2" Center bottom outlet. Mounted on(4) stainless steel legs with casters. National Board# 3059, serial# 15106-1-1, built 2004. ref# 45396022 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's ... morepayment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45396021 Used- Precision Stainless Reactor, 500 Liter (132 Gallon), 316L Stainle
Click To Enlarge- Used- Precision Stainless Reactor. 500 Liter(132 Gallon) 316L Stainless Steel, Vertical. 30" Diameter x 48" straight side, dished clamp top, dished bottom. Internal rated 50 psi at-20 to 302 degrees F. vacuum design 15 psi. 304L Stainless steel dimple jacket rated 100 psi at-20 to 302 degrees F. vacuum design 15 psi. Openings top(3) 1-1/2" 2) 2" 3" 4" 2" Center bottom outlet. Mounted on(4) stainless steel legs with casters. National Board# 9588, serial# 210636-11, built 2002. ref# 45396021 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United ... moreStates. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
T&C 2008 500 Liter Stainless Steel Jacketed Vessel
500 Liter Stainless Steel Jacketed Vessel. Mini Purge. Mettler Toledo Digital Meter. Bald Bottom Agitator. Skid mounted on casters.
|
|
|
500 Liter DCI Certified Pressure Vessel Bright Tank Container Biotech Beer Wine
This auction is for one item: 4.25BBL 500L Stainless Steel Pressure Vessel Aging or Conditioning Bright Tank 45PSI Bright Tank 45PSI Jacketed Specs: National BD/ DCI 500L Stainless Vessel Certified by DCI. Made in 1996, Maximum Allowable Working Pressure 45psi at 350°F, Minimum Design Metal Temperature-20°F at 45psi, jacket MAWP 150psi at 365°F, jacket volume 3 gal, MDMT-20°F at 165psi. Top: Sanitary Clamps(varying sizes) Bottom: Internal Diffuser Plate/ Integral ITT Diaphragm Valve Condition: This item is used and may show minimal amount of surface blemishes. Our aim is to have every buyer satisfied with their purchase. If you require additional information not mentioned in the description or further clarification of the functioning condition of an item. Please ask and we will respond to your request swiftly and to the ... morebest of our knowledge. Please refer to our“Store Pages” links located on the left side of our store homepage to review our full policies and detailed FAQ
|
|
|
500 LITER DCI REACTOR STAINLESS STEEL
One used 500 Liter DCI Reactor. Stainless steel construction, 36" dia X 34" straight side, Dished top and bottom, rated 45 psi to full vacuum@ 320 F internal, jacket rated 150 psi at 320 F, stainless steel legs, We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical. Chemical And Plastic machinery. All auctions are subject to prior sale. You can email us your questions or check our website clevelandprocessequipment.com Contact Number 440 409 4224 item#129.
|
|
|
500 LITER DCI REACTOR 316L STAINLESS STEEL
One used 500 Liter DCI reactor. 316L stainless steel construction, 36" dia X 32" straight side, rated 30/15 psig@300 degrees F internal, jacket rated 100 psi at 300 degrees F, removable dished top, dished bottom, on stainless steel legs. We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical. Chemical And Plastic machinery. All auctions are subject to prior sale. You can email us your questions or check our website clevelandprocessequipment.com Contact Number 440 409 4224 item#130. A;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146bfcf2c87-0x10a-
|
|
|
500 LITER PRECSION REACTOR 316 STAINLESS STEEL
One used 500 liter Precision Reactor. 316L stainless steel construction, bolt on dish top, dish bottom, rated 45 PSI and full vacuum at 300 F internal, jacketed for 100psi at 300 F, top entering off center lightnin agitator, new 1987. We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical. Chemical And Plastic machinery. All auctions are subject to prior sale. You can email us your questions or check our website clevelandprocessequipment.com. Contact Number 440 409 4224 item#128.
|
|
|
500 LITER PRECISION REACTOR, 316L S/S, 51.5/150
YOUR SOURCE. for Pharmaceutical. Chemical, Plastics and Related Process Equipment. For more than 50 years. Federal Equipment Company has been a trusted name in the used pharmaceutical, chemical, plastics and related process equipment industry. As one of the world’s top equipment suppliers, Federal Equipment is dedicated to providing quality used equipment, outstanding service and competitive prices to meet the needs of the used pharmaceutical, chemical, plastics and related process equipment industries. | | | | | |(216) 441-9056 Mouse over image to view One(1) used 500 liter Precision reactor. 316L stainless steel construction, approximately 28" diameter x 49" straight side, removable dish top, dish bottom, rated 51.5 psi and full vacuum at 347 f internal, 304L stainless steel jacket on bottom and straight side rated 150 psi and ... morefull vacuum at 347 f, top mounted off center Chemineermodel 2BTNS-3 agitator drive, 350 rpm output speed, serial# 524399-2, requires approximately 1/3 hp motor, stainless steel agitator shaft with 3 blade prop, 6" sight glass, 4" 2)3" 2" 1.5" 2)1" 25" top nozzles, 2" bottom outlet, 304 stainless steel sheathing over jacket, mounted on 4 stainless steel side lugs, serial# 6506-3, national board# 7613, built 1998. Shipping Details: Since each item's and each customer's shipping needs are unique. Shipping costs and methods will vary by item and customer. Shipping details will be configured by our experienced team at time of purchase and verified with the customer before delivery. More Info Item Number: 46681. Size: 132.000 GAL. Manufacturer: PRECISION. Location: CLEVELAND. OH. All items are F.O.B. Location and are sold AS IS. Please contact Joanne Parente at joanne@fedequip.com or call 216-441-9056 for more information. All descriptions are a reflection of the item to the best of our knowledge and are subject to change. © 2014 Federal Equipment Company 8200 Bessemer Avenue. Cleveland, OH 44127 Phone(216) 441-9056 | Fax 216.271.52
|
|
|
PRECISION 500 LITER JACKETED BIO REACTOR 316 STAINLESS STEEL TANK W/ MIXER
YOU ARE LOOKING AT A PRECISION 500 LITER(138 GALLON) JACKETED BIO-REACTOR. 316 STAINLESS STEEL PRESSURE TANK W/ LIGHTNIN 0.30 HP MIXER. You will get everything you see in the photos, nothing more or less. Please scroll down to see all photos. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 1214-SS00423TR CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand ... morethat we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the d
|
|
|
T & C 500 Liter Jacketed Stainless Steel Vessel Reactor Tank
T& C 500 Liter Jacketed Stainless Steel Vessel Bio Reactor Tank S/N: TC 5841 Year: 2002 Jacket MAWP: 60/FV PSI at 300 F Material: 316L Top Head Thk: 1/4 Shell Thk: 7 GA Shell thk: 14 GA*Note: Rigging& Loading will charges extra $850.00 Located: Yorba Linda. CA This item is F.O.B. Location and is sold“AS IS” WHERE IS” All descriptions are a reflection of the item to the best of our knowledge and are subject to change. Ask me if you have any questions. Thanks.
|
|
 |