Buy It Now
Condition: Used Location: Carol Stream, United States Four 23" long x 2" wide stainless steel agitation blades. One 23" long x 2" wide stainless steel stationary baffle. OAD: 34" L x 60" W x 44" H.
Buy It Now
Condition: Used Location: Carol Stream, United States KOSS 50 GALLON STAINLESS STEEL CONICAL SURGE HOPPER. Top center bridge mounted swept surface agitation. Flip top covers. (2) Rectangular flanged outlets; ... more9"L x 3"W with 15"L x 5"flange. DATE: 09/2009.
Buy It Now
Condition: Used Location: Carol Stream, United States Equipped with 17 gallon, stainless steel heated product hopper with auger agitation, tempeture probe, no tube / no fill, bottom up fill, with suck back ... morenozzle, double fold, with 2 crimping / folding stations, emboss coder and ejection station.
Buy It Now
Condition: Used Location: Tuscaloosa, United States Capacity: 979 Gal. Material: 304 SS.
Buy It Now
Condition: Used Location: Hiram, United States Groen 200G Double Motion Kettle Model SA F-200 SP Agitators: Full Sweep Agitator w/large Christmas Tree style center Agitator Agitator Electrical Specs: ... more5-HP/230V/3-P Manufacture Date: 1969 Kettle Dimension: Approx: 48”W x 34”deep Seller Note: Unit is USED with visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Inside of the kettle is clean and free of any dried debris. What you see in the pictures is what is included in sale. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Unit was tested at our facility with no mechanical issues noted during test. Pictures and are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyers are always welcome to come and personally inspect the unit.
Buy It Now
Condition: Used Location: Chowchilla, United States Stainless steel 300 Gallon Tank, measures 42" diameter X 48" straight side with dish top & bottom, includes 2" diameter center bottom outlet. Top head ... moreincludes manway with hinged cover and (5) various top inlets. Mounted on stainless steel pipe legs with footpads. Previously used at processing facility for surfactants.
Buy It Now
Condition: Used Location: Hialeah, United States CHRIS WHITE. SURPLUS UNLIMITED INC.
Buy It Now
Condition: Used Location: Hialeah, United States 300 Gallon APV Likwifier Round with Scrape Surface Mixing Tank.serial # K-0354. Complete with scrape agitation and bottom-mounted high shear liquifier ... moreblade. Scrapers driven by 5 HP, 1600 RPM motor.
Buy It Now
Condition: Used Location: San Dimas, United States Stainless steel 45 Gallon Jacketed and Agitated Tank with cone bottom and flat top, 304 stainless steel. Includes center top entering agitation with 1.5?. ... moreAgitator driven by 1/3 HP, 3-phase, 60 Hz, 230/460V, 1745 RPM motor thru gearbox with 7.5 ratio, resulting in 233 output RPM.
Buy It Now
Condition: Used Location: Lawrence, United States YOU ARE BUYING A STAINLESS STEEL BLENTECH MIXER USED. about 400 gallon. In Pittsburgh pa.
Buy It Now
Condition: Used Location: San Dimas, United States Stainless steel 45 Gallon 304 Stainless steel, Jacketed and Agitated Tank with cone bottom and flat top. Vessel measures 24" diameter X 23" straight side,1"diameter ... moreflange type center bottom outlet, shaft size 1.5" diameter x 28" shaft with (2) propellers: (1) 12" swing and (1) 6" swing. Includes center top entering agitation. Agitator driven by 1/3 HP, 3-phase, 60 Hz, 230/460, 1745 RPM motor thru gearbox with 7.5 ratio, resulting in 233 output RPM. Top head includes 15" x 5" hinged lid and 6"x 5-1/2". Opening. Mounted on (4) 3 "x 3" square tubing carbon steel legs.
Buy It Now
Condition: Used Location: Carol Stream, United States
Buy It Now
Condition: Used Location: Carol Stream, United States Dish bottom. JACKET LEAKS SOLD AS SINGLE WALL . Equipped with top bridge mounted 2 HP scrape surface agitation. ½ bolt down / ½ flip up cover, 24" x 16" ... moremanway. Top Fittings.
Buy It Now
Condition: Used Location: San Dimas, United States Bowa Stainless steel, jacketed Tank, capacity 350 Liters/92 Gallons, 28" diameter x 30", straight side dome top dish bottom, tank rated maximum working ... morepressure, -0,8/0,5 bar ps at 100 degrees Celsius (212 degrees Fahrenheit). Jacket maximum 2 bar at 100 degrees Celsius, top fitting (2) 3", (1) 1" Tri-clamp, 1" bottom center discharge, Serial number 31793 and manufactured in 2008.
Buy It Now
Condition: Used Location: Carol Stream, United States Tank is a dish bottom and is mounted on mild steel casters. Tank has a 38" inside Dia. x 50" straight wall. Has a center flange mount 20" overall Dia., ... more16" inside Dia. with 8 bolt holes.
Buy It Now
Condition: Used Location: San Dimas, United States Bowa Stainless steel, jacketed Tank, capacity 350 Liters/92 Gallons, 28" diameter x 30", straight side dome top dish bottom, tank rated maximum working ... morepressure, -0,8/0,5 bar ps at 100 degrees Celsius (212 degrees Fahrenheit). Jacket maximum 2 bar at 100 degrees Celsius, top fitting (2) 3", (1) 1" Tri-clamp, 1" bottom center discharge, Serial number 31788 and manufactured in 2008.
Buy It Now
Condition: Used Location: San Dimas, United States Bowa Stainless steel, jacketed Tank, capacity 350 Liters/92 Gallons, 28" diameter x 30", straight side dome top dish bottom, tank rated maximum working ... morepressure, -0,8/0,5 bar ps at 100 degrees Celsius (212 degrees Fahrenheit). Jacket maximum 2 bar at 100 degrees Celsius, top fitting (2) 3", (1) 1" Tri-clamp, 1" bottom center discharge, Serial number 31785 and manufactured in 2008.
Buy It Now
Condition: Used Location: Carol Stream, United States Two 25 gallon, stainless steel, tank system with anchor style agitation. Designed as self contained, hot wax, oil heated, storage systems.
Buy It Now
Condition: Used Location: Cleveland, United States Item #8047. 1 - used approx. 19.8 gallon Lee Mix Tank. T-316 stainless steel construction. Model 19.8 CBT. Serial #C2070P. Built 1995. ID x 27 in.
Buy It Now
Condition: Used Location: Morris, United States Cherry-Burrell 130 Gallon Jacketed Stainless Steel Processor Tank - Mixing, Blending Tank. - Manufacturer: Cherry-Burrell, Cedar Rapids IA. - Dish Bottom ... moreto 2” TriClover TriClamp Center Outlet Connection.
Buy It Now
Condition: Used Location: Carol Stream, United States Model MF1622. 22" wide Intralox style filter belt. Stack light signal tower (Red). On / Off Switch.
Buy It Now
Condition: Used Location: Carol Stream, United States Walker Portable Stainless Steel Tank. NOTE: Local pickup, FOB from our dock. Single Wall 316L S/S Construction. 150 Grit Electro Polish Interior.
Buy It Now
Condition: Used Location: San Dimas, United States
Buy It Now
Condition: Used Location: Carol Stream, United States Portable 130 Gallon stainless steel cylindrical tansporting tank. 36"Dia x 21" straight side (ribbed). 12" ground clearance.
Buy It Now
Condition: Used Location: Carol Stream, United States 282 gallon Stainless Steel Carbonation Infuser Column. 2-1/2" OD Outlet with 10" of floor clearance. 13" long x 13" wide sight glass.
Buy It Now
Condition: Used Location: Mexico Above item has not been test run or inspected for completeness. It is being sold "as-is".
Buy It Now
Condition: Used Location: Mexico Pick up from item location is free.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 93568236 NEW Air Oil Filter Compressor IR GD Atlas Copco 9356 8236 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 4006.5104.2 NEW Air Oil Filter Compressor IR GD Atlas Copco 400651042 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750558336 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 58 336 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750559016 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 59 016 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 93522720 NEW Air Oil Filter Compressor IR GD Atlas Copco 9352 2720 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 5220925060 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750558425 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 58 425 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 521500 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 521500 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 92118678 NEW Air Oil Filter Compressor IR GD Atlas Copco 9211 8678 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1432197aaa1-0xec-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 5081732 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 5081732 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 00771036 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 0077 1036 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C11158-1775 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States OC32 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air OC 32 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$1100.00 Shipping Condition: New Location: Minneapolis, United States The GS rotary screw compressor is designed for a continuous duty operation. All units are fully enclosed with a cabinet for a low sound level. Separation ... moreSystem. Easy oil drain excess. GS COMPRESSOR.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 43552 NEW Air Oil Filter Compressor IR GD Atlas Copco 43 552 Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 48221000 Fini NEW Air Oil Filter Compressor IR GD Atlas Copco 48221000 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6750559236 NEW Air Oil Filter Compressor IR GD Atlas Copco 67 505 59 236 MANN GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 300487 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 300 487 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 413 719 NEW Air Oil Filter Compressor IR GD Atlas Copco 413 719 Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 05500874 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 0550 0874 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C 16012-215 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States OC16 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air OC 16 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1432197aa43-0xe8-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 2914-5050 NEW Air Oil Filter 29145050 Compressor Screw IR GD Quincy Atlas Capco GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
|