|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Bhavnagar Wadva S.O, India · High Strength Teflon or Gland Round Seal. Heating or Cooling Jacket for Ribbon Blender. Full Capacity in Liter: 350 Liter. Mixing Capacity 300 Liter. ... morev OTHER SIZES AVAILABLE! FROM 1 CU FT - 450 CU FT.
Buy It Now
$1000.00 Shipping Condition: Used Location: Killeen, United States Certified by Stainless Technology div. of ABEC Inc. in Springfield, MO. 316L Stainless Steel. Serial no. 7117. F, 14 gauge.
Buy It Now
Condition: Used Location: Sun Valley, United States HOURS OF OPERATION. If the item is listed as working, then it was tested to the best of our ability.
Buy It Now
Condition: Used Location: Sun Valley, United States GEA Niro A/S Spray Dryer Chamber Only Approx. 300 Liter.
Buy It Now
Condition: Used Location: Romeoville, United States YOU ARE BUYING ONE ALLOY PRODUCTS INC SANITARY STAINLESS STEEL PRESSURE VESSEL TANK 50 LITER 125 MAWP PSI. TOP CONNECTIONS ARE AS FOLLOWS: QTY 3) 1-1/2" ... moreOD FLANGE. QTY 1) 4" CENTER) OD FLANGE. NO SIGHT GLASS IS PROVIDED. YOU ARE BUYING EXACTLY WHAT IS PICTURED. THIS IS USED SURPLUS FROM A SHUT DOWN BAYER PHARMACEUTICAL FACILITY AND IS GUARANTEED CLEAN AS PICTURED. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. TW30) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
Buy It Now
Condition: Used Location: Pedricktown, United States Used 750 Liter (~ 200 Gallon) Reactor, Mix Tank. 316L Stainless Steel. Rated 50/Full Vacuum @ 300/-20 Deg.F. x 35" T/T (84" Overall Height) 2" Outlet ... morewith flush mount valve. Sanitary Construction.
Buy It Now
Condition: Used Location: Willoughby, United States Ask for Bob Wells.
Buy It Now
Condition: Used Location: Romeoville, United States The tank is made of high-quality stainless steel and is suitable for use in various industries. UPPER DISH NOZZLES. LOWER DISH NOZZLES. TANK SPECIFICATIONS. ... moreJACKET NOZZLES.
Buy It Now
Condition: Used Location: Millwood, United States Continuous operation, horizontal solid-wall centrifuge for dewatering of industrial and municipal waste water sludge. This centrifuge was rebuilt by the ... moreprevious owner. It is in working condition. All prices are FOB Millwood WV unless otherwise noted.
Buy It Now
Condition: Used Location: Pedricktown, United States Internal and jacket. 316L Stainless Steel. unit is 12" Dia. x 32" T/T. Mounted on a 3' x 3'stainless base with wheels.
Buy It Now
Condition: Used Location: Pedricktown, United States Used 100 Gallon (400 Liter) Northland Stainless Inc. Sanitary Reactor. Model FB-50. s/n 946157. Price and availability are subject to change without notice. ... moreAll machines are listed "as is".
Buy It Now
Condition: Used Location: Pedricktown, United States 1000 Liter (264 Gal.). Jacketed Mixing Tank. Rated 40/Full Vacuum @ 300 Deg.F. Has 2" Center bottom outlet (requires flush mount valve). SN# S/N 10938-1-1. ... more80"H x 56"W x 48"D. Price and availability are subject to change without notice.
Buy It Now
Condition: Used Location: Cedarburg, United States Finish Engineering Co, Inc. Little Still Solvent Recycling System. Solvent Boiling Range : 100-300° F (38-150°C). 1/2 gallon (2 liters) per minute for ... morecondenser. WE'LL DO OUR VERY BEST TO MAKE IT SO!
Buy It Now
$48.74 Shipping Condition: Used Location: Fleetwood, United States Used, In nice condition. The tube & shell heat was in working condition when removed from service. 3/16” Tube Size. Removable End Bonnets for easy tube ... morecleaning. Heat Removal up to 400 Horsepower (300 kW).
Buy It Now
$48.74 Shipping Condition: Used Location: Fleetwood, United States Used, In nice condition. The tube & shell heat was in working condition when removed from service. 3/16” Tube Size. Removable End Bonnets for easy tube ... morecleaning. Heat Removal up to 400 Horsepower (300 kW).
Buy It Now
Condition: Used Location: Pedricktown, United States Has counter rotating sweep mixer with scrapers and high shear mixer. Internal rated Full Vacuum. Top Drive motor Disconnected for removal. Fully tested ... morewith H2O. The cover lifting hydraulics is fully functional.
Buy It Now
Condition: Used Location: Pedricktown, United States 14" Dia.x 14" T/T. Magnetic drive mixer with 1/4 HP, 230/460 volt, 1725 rpm Lightnin XP motor. Unit mounted on wheels. Last used in pharmaceutical plant ... morein sanitary application. Video of unit running available.
Buy It Now
Condition: Used Location: Lake City, United States It has a. 87HP lightning mixer and 1" jacket ports along with lid that has three sanitary ports of 2", 3", and 4". National Board#2984. The agitator is ... more230/460V, three phase.
Buy It Now
Condition: Used Location: Romeoville, United States 100 Liter(26 Gallon) Sanitary 316L Stainless Steel Jacketed Reactor Tank used 100 Liter(26 Gallon) Precision Stainless Sanitary 316L Stainless Steel Reactor. ... moreRated 102/FV@ 400 Deg.F. internal. Jacket rated 150/FV@ 400 Deg.F. Has 1/2 HP Sharpe Mixer model 0.5B221M-4VF with Speed controller. Unit equipped with tank light. Spray ball and temp. readout. Has 2" Asepco discharge valve. Unit mounted on wheels. ~6'9" OAH. If you have any questions please contact Frank Cell: 856-491-0637(call or text) Email: We are in front of the equipment daily and can answer your questions. You may be interested in. MACHINE SAFETY: It is the users responsibility to provide proper saftety devices. Procedures and equipment to safegaurd the machine, or machines, to conform to Federal, State and Local Government Saftey Standards and all Industry Safety Standards. Indemnification: High Bidder/Buyer Agrees to Idemnify and hold harmless Seller of and from any and all claims or liabilities, warnings, or recommendations available from the original manufacturer, or by failure of the user to comply with Federal, State, and Local Laws applicable to such equipment including the Occupatioal Safety and Health Act of 1970. The high bidder agrees to there terms and conditions! Thank You! Price and Availbility are subject to change without notice!
Buy It Now
Condition: Used Location: Pedricktown, United States X 26" T/T. 316L Stainless Steel. 18" Spring assisted lid. Units mounted on wheels. Units have tow hooks. Last used in a pharmaceutical plant in sanitary ... moreapplication.
Buy It Now
Condition: Used Location: Sedalia, United States These are the ETL listed models. Great working unit's. Liquidating entire lab. Chillers, Lab Glass, Distillation, Tables, Vac Ovens, Reactor etc. etc. ... more220V 50/60Hz single phase, 20A, 4300 watt (rotation motor: 300 watts).
Buy It Now
Condition: Used Location: Canada YOU ARE LOOKING AT A DCI 400 Liter Jacketed Bio-Reactor. Stainless Steel Tank w/ 40 PSI Max Pressure. Includes a Pressure gauge, Bottom drain, and spray ... moreball. You will get everything you see in the photos. Nothing more or less. Please see all photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 0614-SS02160AZ CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With mos
Buy It Now
Condition: Used Location: Pedricktown, United States Used 105 Gallon (400 liter) Sanitary Pharmaceutical reactor vessel. Built by Stainless Technology. Has mixing shaft (no drive). 30" ID x 32" T/T.
Buy It Now
Condition: New Location: United States The Proxio Group Ltd. makes reasonable efforts to ensure accuracy of the information we provide.
Buy It Now
Condition: Used Location: Pedricktown, United States Internal Rated 51.5/Full Vacuum @ (-20)/ 300 Deg.F. Jacket Rated 150/Full Vacuum @ (-20)/ 300 Deg.F. Has bottom mount for bottom mounted mixer (not installed). ... more2" Outlet with no valve. Last used in sanitary pharmaceutical facility.
Buy It Now
$214.74 Shipping Condition: Used Location: Madawaska, United States 18" VESSEL OD WITH APPROX 19" CENTER HEIGHT OF VESSEL WITH A TOTAL HEIGHT OF 22.5". SHELL AND HEAD ARE 0.105" THICK. The item you receive may be different ... morefrom the actual item in the photo in the case of multiple quantity lots.
Buy It Now
Condition: Used Location: Pedricktown, United States Used- Sweco PharmASep Vibro-Energy Filter Dryer, Model PH46Y30, 316L Stainless Steel. Screens not included. Driven by a 2.5hp motor. Includes a 300 Liter ... morevessel Certified by Pure-Flo Precision, serial# 240360, built 2004.
Buy It Now
$214.74 Shipping Condition: Used Location: Madawaska, United States 18" VESSEL OD WITH APPROX 19" CENTER HEIGHT OF VESSEL ONLY WITH A TOTAL HEIGHT OF 22.5". SHELL AND HEAD ARE 0.105" THICK. The item you receive may be ... moredifferent from the actual item in the photo in the case of multiple quantity lots.
Buy It Now
Condition: Used Location: Pedricktown, United States 1000 Liter (264 Gal.). Stainless Steel Sanitary Pharmaceutical Grade Reactor. Jacketed Mixing Tank. Rated 40/Full Vacuum @ 300 Deg.F. 80"H x 66"W x 54"D ... more(#23). SN# S/N 6247-3. Price and availability are subject to change without notice.
Buy It Now
$143.56 Shipping Condition: Used Location: Carol Stream, United States Has an 18" (inside dia.). x 22" (depth).
Buy It Now
Condition: Used Location: Pedricktown, United States Both shell and Jacket. 20" Dia.x 20" T/T. Magnetic drive mixer with 1/4 HP, 230/460 volt, XP motor. Unit mounted on wheels. Last used in pharmaceutical ... moreplant in sanitary application. Video of unit running available.
Buy It Now
Free Shipping Condition: Used Location: Antioch, United States 1100 Liter Industrial "Polishing" Mix Tank. Approximate 300 Gallon (1100 Liter), 304 Stainless Steel, Vertical. Jacketed tank body. Top center entering ... moreanchor style agitator and top entering high speed disperser.
Buy It Now
Condition: Used Location: Pedricktown, United States Internal Rated 51.5/Full Vacuum @ (-20)/ 300 Deg.F. Jacket Rated 150/Full Vacuum @ (-20)/ 300 Deg.F. 2" Outlet with no valve. Last used in sanitary pharmaceutical ... morefacility. Price and availability are subject to change without notice.
Buy It Now
Condition: Used Location: Canada WITH SIDE MANWAY & COVER (INSIDE TANK). -TANK WEIGHT: 6500 LBS APPROX. -INSULATED WITH STAINLESS STEEL CLADDING. We also accept Bank Wire Transfers. -PREVIOUS ... moreUSE: FOOD APPLICATION.
Buy It Now
Condition: Used Location: Canada #7488 - USED 350 GALLON TANK (REACTOR), 316L STAINLESS STEEL, INSULATED, FULL VACUUM. REACTOR HAS IMPELLER, WOULD REQUIRE A 0.75 HP MAGNETIC MOTOR DRIVE. ... more-RATED FULL VACUUM. -WITH TWO TOP CIP SPRAY BALLS.
Buy It Now
Condition: Used Location: Texas City, United States PRODUCT PUMP: VIKING #F32, PUMP SPEED SETTING: 0-300 RPM, MILLING SHAFT SPEED: 1067-3793, DISC PERIPHERAL SPEED: 900-3200.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 220911 NEW Air Oil Filter Compressor Screw IR GD 220 911 Atlas Capco Bottarini GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6211472250 NEW Air Oil Filter Compressor IR GD Atlas Capco chicago pnoematic GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 4002.3102.2 NEW Air Oil Filter Compressor IR GD Atlas Copco Flottman 400231022 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
Condition: Used Location: Fall River, United States Internal jacketed baffles on lid for cryogenic cooling. Vessel is approx. 95 gallons without baffles. Certified by Stainless Technology. We deal with ... moreseveral freight brokers to ensure you the best possible rate.
Buy It Now
Condition: Used Location: Orange, United States Portable mixing vessel. In excellent condition. Very clean. Ships via freight. We work with multiple carriers. If you are arranging freight, we will need ... morea Bill of Lading from your common carrier. Pick-up location has a forklift.
Buy It Now
Free Shipping Condition: New Location: Faridabad Sector 16a S.O, India High Strength Teflon or Gland Round Seal. Heating or Cooling Jacket for Ribbon Blender. Full Capacity in Liter: 350 Liter. Mixing Capacity 300 Liter. ... moreOTHER SIZES AVAILABLE! FROM 1 CU FT - 450 CU FT.
Buy It Now
Condition: Used Location: Hiram, United States Fluitron Inc. 10 Liter Reactor Certification: Cryochem Inc. Shell/Jacket Certification: Certified by Fluitron Electrical Specs: 110Volts, 7.9amps, 60HZ ... moreShipping Dimensions: 48”L x 48”W x 68”H Weight: Approx. 750lbs Seller Note: Unit is USED. Some minor scratching/blemishes can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has not been tested at our facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.
Buy It Now
Condition: Used Location: Plant City, United States 1- Used Jacketed mixer jacketed cooler system.
Buy It Now
Condition: Used Location: Morris, United States Cherry Burrell 52 Gallon Jacketed Processor – Mixing Tank. - Lightnin Clamp On Mixer – Agitation, Model XJ-65. 65 HP. - Dish Bottom to a Center Outlet ... morewith Stainless Steel Ball Valve. - Stainless Steel Construction.
Buy It Now
Condition: Used Location: Carol Stream, United States 316 S/S 50 Liter dish bottom tank. Has an 18" (inside Dia.). x 22" (depth). OAD: 18" (L) x 18" (W) x 25" (H).
Buy It Now
Condition: Used Location: Buford, United States Casters - 2 swivel casters, 2 rigid. Rarely used 80 gallon stainless steel tank. Made using 1 large, bent sheet of stainless steel and 2 end pieces to ... morecap off making this unit more durable and less likely to leak due to less welds being that the main body is 1 sheet.
Buy It Now
Condition: Used Location: Brisbane, United States Stainless steel 1,450 gallon (5,500 liter) insulated tank, previously used in beer processing, measures 60" diameter x 10' straight side, slight cone ... moretop and cone bottom. Bottom includes 1" diameter center bottom outlet. Top head includes 1" diameter center top inlet and lifting eyes. Includes side bottom 16" x 12" oval manway with cover and internal spray ball. Tank is mounted on (4) 4" diameter pipe legs with footpads. Manufactured by Nerb. Fabrication number 5486.
Buy It Now
Condition: Used Location: Morris, United States Cherry Burrell 25 Gallon Jacketed Processor – Mixing Tank. - Lightnin Clamp On Pneumatic Mixer – Agitation, Model XJA-33. - Dish Bottom to a Center Outlet ... morewith Stainless Steel Ball Valve. - Stainless Steel Construction.
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 640608 NEW Air Oil Filter Compressor Screw IR GD Atlas Capco 640608 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1432197aadf-0x100-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 5220925060 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 6241271900 NEW Air Oil Filter Compressor IR GD Atlas Copco Worthington GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 4006.5104.2 NEW Air Oil Filter Compressor IR GD Atlas Copco 400651042 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 521500 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 521500 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 5081732 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 5081732 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The ... moreoil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 92118678 NEW Air Oil Filter Compressor IR GD Atlas Copco 9211 8678 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1432197aaa1-0xec-
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C 16012-215 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States 00771036 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air 0077 1036 GSI Industrial 621-721-1634 Questions Please Call In the compressor system. ... moreThe oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
Buy It Now
$10.00 Shipping Condition: New Location: Minneapolis, United States C11158-1775 NEW Air Oil Filter Compressor IR GD Atlas Copco Comp Air GSI Industrial 621-721-1634 Questions Please Call In the compressor system. The oil ... moreitself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5-25 micron range(depending upon application) it is again. The depositing of oil-borne contaminant over time(similar to the oil-separator) that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil. Like all of our products. GSI oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical. A B C Part No. Capacity(gallons/liters/min. Thread OD inches/ mm Length inches/ mm GS100 2.17/ 12.00 3/4- 16 3.15/ 80.00 3.66/ 93.00 GS200 5.00/ 20.00 3/4- 16 3.15/ 80.00 5.50/ 140.00 GS300 10.50/ 40.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS400 10.50/ 40.00 3/4- 16 3.78/ 96.00 5.50/ 140.00 GS500 10.50/ 40.00 1- 12 3.78/ 96.00 5.50/ 140.00 GS600 11.89/ 45.00 1- 12 3.78/ 96.00 6.77/ 172.00 GS700 18.50/ 70.00 1- 12 3.78/ 96.00 8.30/ 210.00 GS800 18.50/ 70.00 1- 12 4.33/ 110.00 8.94/ 227.00 GS900 47.50/ 180.00 1-1/2-16 5.50/ 140.00 11.69/ 302.00
|
|
|
|
300 LITER CHEMICAL HOLDING TANK - CORROSIVE LIQUID STORAGE + FLOW METERS & GAUGE
YOU ARE LOOKING AT AN APPROXIMATELY 300 LITER CHEMICAL HOLDING TANK- CORROSIVE LIQUID STORAGE + FLOW METERS& GAUGE. Unit was acquired from a local laboratory and was stored in a clean room. The entire unit sits on a metal stand and includes a bottom drain and pressure cover. Please see photos for more details and condition. You can arrange your own shipping or we can provide you with a freight quote. 10-LI103HL CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS ... moreIS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have
|
|
|
12008-026 75 gallon/300 liter Tolan sanitary mix tank.
75 gallon/300 liter Tolan sanitary mix tank. 30" diameter X 23" straight side. 30/FV@ 100 degree F internal. NB 175. SN3232.4. T316 stainless steel. Top mounted Lightning drive with 3 blade prop agitator. Panel coil jacket. On castors. Unit sold as-is. Buyer is responsible for freight. We will load to truck. Crating and/or palletizing costs are extra. If you require assistance arranging freight. Please contact us at 856-287-2071. Payment is required prior to shipment. We buy and sell process equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact Scott at 856-287-2071 or via email at starzy@exllc.com. Please ask all questions prior to bidding.
|
|
|
45056003 Used- M.J.S. Tank, 300 Liter (79.2 Gallon), Type 300 RSWAC/C, 304 Stain
Click To Enlarge- Used- M.J.S. Tank. 300 Liter(79.2 Gallon) Type 300 RSWAC/C, 304 Stainless Steel, Vertical. Approximately 30-1/2” diameter x 25” straight side, open top with a(1) piece cover, flat bottom. Off center bottom entering agitator, no blade with a 0.25kw, 3/60/230/460 volt, 1656 rpm motor. Approximate 1-1/2” Center bottom outlet. Mounted on a carbon steel frame with casters. Serial# 48992, built 1999. ref# 45056003 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. ... moreAll items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45478001 Used-Lee Reactor 300 Liter(79.25 Gallon) Stainless Steel. Vertical. Int
Used-Lee Reactor 300 Liter(79.25 Gallon) Stainless Steel. Vertical. Internal Vacuum/ 50 PSI@ 20/ +300 Degree F. Jacket rated 100 PSI@ 20/+300 Degree F. Off Center Bottm Entering Agitator. Dished Heads. Portable on Casters. ref# 45478001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for ... moreeach item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
300 LITER STAINLESS STEEL MOBILE TANK W/ LID COVER, CASTERS & 1" BOTTOM PORT
YOU ARE LOOKING AT A 300 LITER STAINLESS STEEL MOBILE TANK W/ LID COVER. CASTERS& 1" BOTTOM PORT. Unit was acquired from a local laboratory and was stored in a clean room. The entire unit is mounted on casters and includes a bottom drain and a Lid. Please see photos for more details and condition. You can arrange your own shipping or we can provide you with a freight quote. 10-SL0506D CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand ... morethat we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the date
|
|
|
80 gallon 3l6L SS PRESSURE TANK sanitary 300 liter Precision Stainless VACUUM
J. Little Mercer Co. Inc. 80 GALLON STAINLESS STEEL PRESSURE TANK Stock Number: E-3284 Mfg. Precision Stainless No. 1788-2. 1996, NB 6507 Rated for 45 psi@ 400 deg. F and 15 psi vacuum 316L stainless steel. 24 x 36 inch. Clamp top, dished bottom 300 Liter capacity. Has slight dent in outer insulated wall that does not affect the inside. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at ... moreany time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
300 liter bohle bins
Make: Bohle. Model: MCL-300 On Casters. This lot is used(except when noted) Unit sold as-is. Where is. Buyer is responsible for freight and any skidding/crating that is required. If you require assistance arranging freight. Please contact us at(508) 646-2744- Payment is required prior to shipment. Please make sure to ask all of your questions prior to bidding. All items purchased must be paid for in full within five(5) days of the eBay sale date. Items not paid for in full within this timeframe may be relisted for sale at Surplus Solutions’ discretion. All items purchased must be picked up within ten(10) days from the eBay sale date. Unless given specific permission to extend the time. If the buyer has not picked up their purchases within that time frame, the buyer will be subject to additional storage charges that must be paid prior to the ... morerelease of the equipment. Any purchases paid for and not picked up with thirty(30) days of the eBay sale date will be considered abandoned property and the equipment will no longer be available to the purchaser. We buy and sell process Equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact us at(508) 646-2744. Please Visit SSLLC on the web to view all of our available equipment.
|
|
|
PROCESS SOLUTIONS 300 LITER 316 STAINLESS STEEL TOTE W/ VALVE - POWDER HOPPER
YOU ARE LOOKING AT A PROCESS SOLUTIONS 100 LITER STAINLESS STEEL CONE TOTE W/ LID& VALVE- MOBILE POWDER HOPPER. Item is in good condition and is mounted on a stand w/ wheel. The cone is removable from the stand. We have other Totes available in our store. Please see photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 0614-SS0183VR CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges ... moreor returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to wor
|
|
|
DCI Inc. 300 LITER JACKETED BIO-REACTOR STAINLESS STEEL TANK W/ TOP MIXER
YOU ARE LOOKING AT A DCI Inc. 300 LITER JACKETED BIO-REACTOR STAINLESS STEEL TANK W/ TOP MIXER. MAX TANK PRESSURE 40PSI. The entire tank is fixed on Load cells and includes a tank light. This tank features a double propeller Mixer w/ 1 HP Baldor Inverter motor. You will get everything you see in the photos. Nothing more or less. Please see all photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 0514-SS02256FV CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty ... moreunless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us eit
|
|
|
DCI 300 LITER JACKETED BIO REACTOR 45 PSI TANK W 3/4 HP STERIMIXER & CONTROLLER
YOU ARE LOOKING AT A DCI INC. 300 LITER JACKETED BIO REACTOR 45 PSI TANK W/ 1 HP STERIMIXER& CONTROLLER. MAX WORKING PRESSURE FOR THE TANK IS 4 5 PSI@ 300 ºF AND FOR THE JACKET IS 125 PSI. You will get everything you see in the photos. Nothing more or less. Please see all photos for details and condition. Please ask us for a freight quote before you buy or you can arrange your own shipping. We can provide Local delivery within Southern California. 0315-SS05676SYL CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds ... moreor exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then it was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the oppor
|
|
 |