|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$50.00 Shipping Condition: Used Location: Bristol, United States Up for auction is a vintage 16" South Bend Lathe Cone Cover. AKA Belt Cover. I am selling this as I took it off the machine so you will have to clean ... moreit. Has lubrication chart in tact and attached as original. The Jam Nuts part#139x27 and Set Screws part# P702T&H1 come on it as well. So clean it and use it or just use it. Serial number on lathe 974 HKR 8
Buy It Now
$5.95 Shipping Condition: New Location: Delphi, United States Our 1.5" x 8 TPI chuck thread protectors. This chuck thread protector will fit all chucks and plates with 1.5" x 8 TPI threads.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to ... morethe lathe center line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Package Including：.
Buy It Now
$13.99 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
Free Shipping Condition: Used Location: Seneca, United States It was found in a box marked “South Bend Lathe” on the side.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 5pcs AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits up to ... more7/16" .
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States This is off of an early 9” workshop lathe… the type with the oilers on top of the headstock. I don’t know how universal they are with the “newer” 9” lathes ... moreThere is some backlash in the nut but there a guy on ebay selling replacements.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ lot of parts teeth good from south bend 13 lathe for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
Buy It Now
$6.00 Shipping Condition: Used Location: North Chelmsford, United States South Bend?.
Buy It Now
$20.49 Shipping Condition: Used Location: Kingsburg, United States I find great joy knowing that all people will reap what they sow, and that all people will get to deal with God for their actions good or bad. in good ... moreused condition. simply changed their mind. I have no idea if they will last 10 minutes or 50 years, no warranties are implied & no warranties are included.
Buy It Now
Free Shipping Condition: New Location: Ionia, United States Fits 17" South Bend Turnado lathes with 6 TPI lead screw. NEW 3D Printed South Bend Lathe thread dial worm gear. Replace that worn out worm gear on your ... morethreading dial with a nice new plastic one. Made from chemical resistant long wearing plastic.
Buy It Now
Free Shipping Condition: Used Location: Rochester, United States Southbend Lathe 7/16"sq Wrench Vintage USA.price for 1pc my choice no pick and choose. Thanks
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States
Buy It Now
Free Shipping Condition: New Location: United States Item model number: AXA 250-111. Application: For Lathe Swing 6"-12". Material: Made of High Quality Steel. All working parts are hardened and ground ... moresteel. Power Source: Electric. Date First Available: April 22, 2023.
Buy It Now
$3.97 Shipping Condition: Seller refurbished Location: Addison, United States Bits South Bend 1946 SB16. How to Grind Lathe Tool Cutter.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Brand new. No time wasted with shims. All working parts hardened and precision ground. Piston type tool post are precision engineered to ... moreassure repeatability accuracy. Piston type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12". .
Buy It Now
$100.70 Shipping Condition: Used Location: Westland, United States Vtg antique South bend 9 A bench top belt driven metal lathe headstock assembly. Nice condition. Any questions or need more pictures please ask.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States 1/2" & 5/8" SLOT WIDTHS, 4" & 6" OALS, 4" TALL. LOCATION: WB4-1-1-10. M & J TOOLING LLC. YOU ARE PURCHASING THE PICTURED. / LABELING PRODUCT SPECIFICATIONS ... moreAND / OR LABELING.
Buy It Now
$45.16 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States These wipers cross reference to the original South Bend part number PT59R1. Wipers are sold in sets of 4 and are very reasonably priced compared to OEM ... moreor used parts so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$7.25 Shipping Condition: Used Location: Eau Claire, United States For sale is a spanner wrench. This is an Armstrong No 428.
Buy It Now
$26.55 Shipping Condition: New – Open box Location: Albuquerque, United States South Bend Lathe Inc., Vintage Unused Gearbox. Vintage 1970's, open-box condition. Never assembled, in brand new condition.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: New Location: Ionia, United States These are 3D plastic printed gears & will fit South Bend, Hercus, Boxford & Sheraton 9" lathes. 18DP 14.5 PA. The set includes the following single width ... moregears with the following teeth Gear Face Width =. 375" (3/8").
Buy It Now
$6.80 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$40.00 Shipping Condition: New Location: Ludvika, Sweden Swing over bed : approx. 114-115mm / 4,5". - Built to fit Swedish Blomqvist BS600 lathe (clone of a South Bend 9"). - Quick operation thumb screws are ... more3d-printed in PLA. - Inserts (helicoil) for threaded fingers.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims All working parts hardened and precision ground .
Buy It Now
$4.77 Shipping Condition: Used Location: Wallins Creek, United States If it's obvious that color has bled due to exposure to humidity or water exposure, you will see a. CONDITION NOTE above.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. The selector ... morefor power feed or 1/2 nuts is a push/pull knob.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$28.00 Shipping Condition: Used Location: New Hyde Park, United States South Bend 9" Junior Lathe Headstock Spindle Flat Belt Cone Pulley. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$14.95 Shipping Condition: New – Open box Location: Plymouth, United States shop made taper attachment for the southbend heavy 10. pretty much raw, out of the mold. you will do all required machining. made from high quality aluminum. ... morea completed, machined bracket is available in another selling ad. check it out.no returns once you start machining.
Buy It Now
Free Shipping Condition: Used Location: Blossburg, United States South bend lathe worm gear, clutch for worm gear, and also feed gears with pivot arm. All in good working order. For models 9 and 10k. Worm gear is for ... morea .750" feed shaft. Free Domestic shipping to lower 48 states. No Alaska/Hawaii/ or international shipping. Any questions feel free to ask. Thanks!
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States I've been having trouble finding saddle locks for South Bend 9" and 10K lathes so I had a local machinist make some up for me. Please visit our ... morewebsite. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
Buy It Now
$4.89 Shipping Condition: New Location: Cross Plains, United States Lathe carriage indicator stop holder for the SIEG SC4 and LMS 3540. (EXAMPLE shown is on a South Bend lathe but works on your SIEG SC4 and LMS 3540 )! ... moreSieg SC4 lathe. The below video is a demonstration on a South Bend 10K lathe showing the use of a simple carriage stop with a dial indicator.
Buy It Now
$13.60 Shipping Condition: New Location: Delaware, United States Very rare South Bend 10K Hardinge 6K lathe emergency collets made in Germany for Buck in Kalamazoo, MI. New old stock in original packaging. Lot of 4.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description?? Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
Buy It Now
$7.55 Shipping Condition: Used Location: Berlin, United States FOR SALE IS THE APRON CLUTCH STAR KNOB AND RETAINING SCREW OF A 9' SOUTH BEND LATHE MODEL A IN VERY GOOD CONDITION. IT WILL ALSO FIT MODEL B AND 10K ... moreLATHES. THE RETAINING SCREW HAS A LEFT HAND THREAD. SHAFT INCLUDED. YOU WILL GET THE PARTS JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept cashier's check. Or credit card by phone to my merchant account.MC, VISA,AMEX,DISCOVER) Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $3.99 USPS FIRST CLASS Mail with Delivery Confirmation. I ship most items the next weekday after receiving payment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Click Here. Double your traffic. Try Vendio Gallery Risk FREE!
Buy It Now
$14.05 Shipping Condition: Used Location: Ottawa, United States 13/16" Bore, 7/16" Bolt, Bolts 2" apart on center.
Buy It Now
Free Shipping Condition: New Location: Ashford, United States New Steady Rest Jaws / Fingers with Roller Bearings for South Bend 9" & 10K & Heavy 10" Lathes and Logan 10" & 11" Lathes. Replaces South Bend part PT128NR1 ... moreand Logan parts LP-2417 & AC-192.
Buy It Now
Free Shipping Condition: Used Location: Youngstown, United States Will combine shipping. c1
Buy It Now
$7.25 Shipping Condition: Used Location: Baltimore, United States SOUTH BEND 9" 10K METAL LATHE IDLER CHANGE GEAR BOLT BUSHING STUD ASSY EXCELLENT CONDITION Normal 0 false false false MicrosoftInternetExplorer4 ... moreIF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE EVERY PART FOR A 14" ROCKWELL/ DELTA BAND SAW AND NO TIME TO LIST THEM ALL. IF THERE IS SOMETHING YOU NEED PLEASE SEND ME AND E-MAIL AND I'LL GET IT FOR YOU. I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e81b1a956-0xf9-
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOU
Buy It Now
$8.95 Shipping Condition: Used Location: Youngstown, United States
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. The selector ... morefor power feed or 1/2 nuts is a push/pull knob.
Buy It Now
Free Shipping Condition: Used Location: Sterling, United States Removed from a complete and running South Bend 10L lathe. This door is used but in good usable condition. It's an original OEM Genuine South Bend lathe ... morepart. No cracks, repairs, or excessive wear. Dimensions in photos for reference. Ships free to continental USA. Buyers outside continental USA please message prior to purchase for shipping quote.
Buy It Now
Free Shipping Condition: New Location: Franklin, United States
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$10.85 Shipping Condition: Used Location: Baltimore, United States Very nice tensioner lever.
Buy It Now
$4.95 Shipping Condition: Used Location: Jupiter, United States UP FOR SALE IS THE CROSS FED SLIDE GIB AND SCREWS FROM A SOUTH BEND 9" LATHE MODEL A. IN VERY GOOD CONDITION. A LINE HAS BEEN MADE TO CAPTURE THE LUBRICANT ... moreBY THE PREVIOUS OWNWER. Double your traffic.
Buy It Now
$6.00 Shipping Condition: New Location: Berrien Springs, United States New Atlas/Craftsman traverse assembly 24 tooth steel gear. This same gear is used for cross-feed engagement. Does your large ZAMAC traverse gear look ... morelike it has Piranha teeth instead of gear teeth? Why pay more than $100 for a used traverse assembly if all you need is a new gear. I've put a recess in the outside to give room to peen the end of the shaft over after the shaft has been ground away enough to press off the old gear. This should be done carefully to avoid damaging the case. I'll provide a contact number with the gear so I can personally answer any questions you may have about the process.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOU !!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$33.91 Shipping Condition: Used Location: North Tonawanda, United States This is off a N series lathe. They were made from 1930-1935. They had bronze spindle bushings. Another indicator is the clutch pulls out. if you have ... morea star knob or lever style these parts likely won’t fit.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States South Bend 10L Heavy 10 Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are ... morefor your business no matter how big or small your contribution is. THANK YOU
Buy It Now
$3.50 Shipping Condition: New Location: Ionia, United States This also allows the indicator to be removed for other uses without having to realign. This indicator mount is made from really tough & durable 3D printed ... moreplastic. This eliminates the chance of scraping or nicking the ways on your lathe bed.
Buy It Now
$15.00 Shipping Condition: New Location: Canada New Caporali 3/32" 3C Collet. Made in Italy. box/container may be different than the one shown Premium Quality made in Italy NOT China like most others ... morefound on the market. Please See additional Pictures Below the Description.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to ... morethe lathe center line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Package Including：.
|
|
|
|
SOUTH BEND 9" 10K MODEL A LATHE 36" BED QUICK CHANGE LEAD SCREW 32 5/16" LONG
ORIGINAL SOUTH BEND 9" 10K METAL LATHE MODEL A 36" LEAD SCREW 32 5/16" OAL 24-1/4" THREADED 3/4" DIAMETER 2-11/16"END SHAFT 5/8" DIAMETER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
milling machine and drill press vises,south bend lathe,atlas milling machine
2) vises.see photos for condition.one vise the screw backs from the jaw when retracted but tightens fine.The other is missing a bolt. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1449b7f83c4-0x104-
|
|
|
ORIGINAL SOUTH BEND 9 METAL LATHE MODEL B OR C LEAD SCREW BUSHING BRACKET PT4NK1
ORIGINAL SOUTH BEND 9 MODEL B or C METAL LATHE LEFT LEAD SCREW BUSHING PART NO. PT4NK1 The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
J H WILLIAMS A-0-S STRAIGHT TOOL HOLDER SOUTH BEND ATLAS CRAFTSMAN METAL LATHE
J. H. WILLIAMS AGRIPPA STRAIGHT TOOL HOLDER NO. A-0-S 3/8" X 7/8" X 5" LONG ACCEPTS UP TO 1/4" TOOL BITS The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
South Bend model C 9" 10K Lathe Lead Screw for a 3 foot bed W/ matching supports
This Lead Screw came off of a South Bend 9" model C lathe. It is for a 3 foot bed. Total length is approx. 39.5 inches. The length of the threaded portion is approx. 23 3/8 inches. Screw comes with Woodruff Key. This lead screw also comes with the ORIGINAL matched Lead Screw Support Bushings. Everything is in excellent condition. The threads are perfect.
|
|
|
VTG Book How to Run A Lathe South Bend Lathe Screw Cutting 55th Edition 1958
VTG Soft Cover Book How to Run a Lathe published by South Bend Lathe INC 55th edition printed 1958 measures about 5" x 8" with 128 pages great condition. With the previous owners name written on front cover loaded with pictures. Specifications and etc_ If. After the sale, you feel you cannot leave favorable star or feedback ratings, contact me and lets see what we can work out I have spent a lifetime of picking and collecting. But alas its time to start selling. I have a bit of everything and will be listing a variety of things. If you dont see what you are looking for, ask me, i may be able to list it. Because the title of the listing is made up of searchable words. The body of the description and pictures supersede the wording in the title and repesents what you are bidding on. The Shipping calculator may not always be right. ... moreIf it appears it isnt. Give me your shipping information and i will be glad to give you an exact shipping amount. All of my items come from auctions. Estate or private purchases. I cannot guarantee if they come from a smoke free, pet free, etc home. I list items whenever i have time. Which means they could end at a late or very early time at your location, so i suggest not waiting to the last minute to bid, if you dont want to miss it. Payments and other Terms. I will accept traditional methods of payment in addition to paypal. Payment is expected in a timely manner. I think 3 days is fair. Unless other arrangements are made. All items are for sale locally and may be removed from ebay if there are no bids. An item with a bid will not be removed for local sale. All items are offered as is or as described. Unless otherwise stated they are used items. Return Policy. Returns will be accepted if returned within 14 days. Buyer pays return shipping costs and items must be returned in the same condition as i ship them. Shipping is based on an estimate before it is packaged for shipping. Your feedback lets me know you received your item. So please do the feedbacks, i always reciprica
|
|
|
ORIGINAL RIVETT 1A COLLET 4 SOUTH BEND 9" METAL LATHE 3/32
Original Rivett 1A 3/32 collect for a South Bend 9" Metal Lathe. Marked" RIVETT 1A 3/32" Threads are in fine order. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL RIVETT 1A COLLET 4 SOUTH BEND 9" METAL LATHE 1/16
Original Rivett 1A 1/16 collect for a South Bend 9" Metal Lathe. Marked" RIVETT 1A 1/16" Threads are in fine order. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1449f7cc3ce-0x10e-
|
|
|
ALLEN BRADLEY 350-AAV32A REVERSING DRUM SWITCH SOUTH BEND ATLAS METAL LATHE
ALLEN BRADLEY BULLETIN 350 SIZE 0 SERIES NO 350-AAV32A REVERSING DRUM SWITCH CONTROL MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1449fddcf73-0x117-
|
|
|
RARE SOUTH BEND ACCESSORY 9 10K METAL LATHE - HEADSTOCK BED CHIP GUARD DEFLECTOR
Nice- Original South Bend lathe chip deflector. Measures 2 1/2" wide. 2 1/2" long from V groove to end. Mounts against the headstock cast between the bed ways under the spindle threads. Is used to deflect any debris. In fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE SET ORIGINAL SOUTH BEND 9" 10K LATHE BED LEVELING LEGS BASES 403NK1
Very Nice- Set of original South Bend leveling bed legs for a 9" or 10K South Bend lathe. Left leg is stationary. Right leg has leveling screws at front and rear, allows for easy manual bed adjustment- very nice. South Bend part number 403NK1. Bolt pattern is 3" side to side, 2 1/4" front to back. Leg is 3 1/2" high. Includes original hardware as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ORIG SOUTH BEND 9" 10K METAL LATHE LEAD SCREW BUSHING BRACKET SUPPORT
Excellent Condition- Original lead screw bushing bracket with original mounting screws for a South Bend 9" or 10k lathe. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIGINAL SOUTH BEND 9" 10K LATHE HEADSTOCK SPINDLE THRUST BEARING PT207NK1
Nice Original Spindle Thrust Bearing for a 9" 10K South Bend Metal Lathe. Part Number PT207NK1. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE LOT OF 3 SPIRAL END MILLS FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Nice Lot of 3 Spiral End Mills for an Atlas. Craftsman or South Bend Metal Lathe. Marked"Weldon 5/8" B 20-3 GRD-HS" 2 15/16" total lenght, Weldon 1/4 A84 HS CAT BB8-2" 3 1/8" total length and"3/8 2409" 2 15/16 total length. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144a00cdfd5-0x11c-
|
|
|
VERY NICE ORIGINAL SOUTH BEND 10K METAL LATHE REVERSE TUMBLER GEAR BRACKET
Very Nice- Original South Bend reverse bracket assembly for a South Bend 10K lathe. Retains original paint. Stamped 635K2. All in very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
9" 10K South Bend lathe QUICK CHANGE GEAR BOX XCLNT!!
This listing is for a 9" 10K South Bend lathe quick change gear box in great condition. None of the teeth are broken. The gears are in excellent condition. All oilers are in place. It is super clean. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
South Bend Lathe HWC-100k Collet Drawbar "31/64 Collet INCLUDED"
HWC-100k pictured. It has a small ding(pictured) that does not effect its functionality. The Collet still seats all the way down. Its pictured with a hardinge 31/64 6K collet. Included. Any questions, please ask.
|
|
|
LATHE TAILSTOCK TURRET #2 TAPER FITS ATLAS CRAFTSMAN SOUTH BEND LOGAN
Lathe Tailstock Turret. Germany Made. Model E4-489 Fits Lathes with#2 Morse taper Attachment is in good used condition. Check out my!
|
|
|
ORIGINAL SOUTH BEND 9 10K METAL LATHE LEAD SCREW BEARING BUSHING BRACKET SUPPORT
ORIGINAL SOUTH BEND 9"10K METAL LATHE LEAD SCREW BUSHING The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
JACOBS 18N DRILL CHUCK W/ MT4 & KEY SOUTH BEND ATLAS CLAUSING LOGAN LATHE MILL
JACOBS 18N DRILL CHUCK W/ MT4& KEY OPERATES SMOOTHLY. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
Atlas Craftsman 13-16" Lathe Tool Post Rocker Lantern Holder Logan South bend
Offered is a nice used Lantern style tool post for a 13" 16" South Bend or other type of similar lathes. This one came off of a South Bend. Includes all that is in the picture. Slot is.58 wide. t slot key is 1.75"x1.90"x.38"
|
|
|
ROHM 36936 5" INDEPENDENT 3-JAW LATHE CHUCK for 1 1/2-8 Thread For South Bend
Offered is a nice 3-jaw universal Chuck w/ a 1 1/2" 8 Thread back for a South Bend 9" or 10" Lathe. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144a297ae6d-0xe3-
|
|
|
South Bend Heavy 10 Lathe Head Stock Collet Adapter Morse Taper #3 MT3 3MT
Up for sale here is a South Bend Heavy 10 Lathe Headstock Collet Adapter Morse Taper#3 MT3 3MT. This fits in South Bend's proprietary headstock taper(almost but not quite a MT5) and allows you to hold Morse taper#3 shanks in your lathe headstock. These are great for running on centers with a drive plate. Used in good condition. Feel free to ask any questions. SCT3468
|
|
|
Booklet- How to Run a Lathe- 1944- South Bend Lathe Works- Indiana
S 7 This is an interesting booklet from the South Bend Lathe Works in Indiana. Published in 1944. It's a guide to using one of the Lathes they make and tips for becoming a machinist. It's nicely illustrated and has 128 pages. Item measures 5 x 8 inches. Thanks for looking.
|
|
|
Original 1938 South Bend Lathe Works Catalog
Original September 1938 South Bend Lathe Works 9 Inch" Workshop Lathe" Catalog Bulletin No. 33-J 8 1/2 x 11" 16 pages. good condition. Also included are an original cover letter and order form. Buyer to pay $3.00 s&h USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SHOP MADE STEADY REST fits 9" South Bend lathe
This listing is for a shop made steady rest that fits a 9" South Bend lathe. It is very well built. The measurement from center of"V" to center of flat is 2 5/8" From bottom of flat to center of rest is 4 1/2" It can hold material up to 6" in dia. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
PAIR OF DRILL CHUCKS for Atlas Craftsman South Bend Logan lathe
This listing is for a pair of drill chucks. They are both 1/4" One is a Jacobs 1B and the other keyless chuck has no name. They are in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
South Bend 13" lathe drawbar tube collet closer 5C HWC-104 draw bar
Up for sale is this drawbar tube/ collet closer for South Bend lathes. This is for 5C collets and I believe it is for a 13" lathe but please confirm for yourself. The only part number I see is HWC 104. Overall the length is 22-1/4" I got this in a lot of other lathe parts and I do not have a need for it. The threads are not the best. Please take a look at my other auctions as I will be listing lots of other South Bend parts. If you have any questions feel free to email me. I will combine shipping.
|
|
|
SOUTH BEND LATHE HEAVY 10" BELT TENSION MECHANISM
THIS IS THE BELT TENSION MECHANISM FOR THE HEAVY 10" SOUTH BEND LATHE WITH THE CAST IRON BELL BASE.HAPPY BIDDING!
|
|
|
RARE VINTAGE SOUTH BEND LATHE MACHINE LEVEL WITH BRASS TAG
Up for auction is this South Bend 12 inch machine level. It sports a brass ID tag with a picture of a lathe. Wood box is missing lid. This is a very nice level.
|
|
|
5" CUSHMAN 3 JAW CHUCK 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 1 1/2 X 8 TPI
Original 5" 3 Jaw with Reversing Jaws Cushman Chuck for an Atlas. Craftsman, South Bend or Logan Metal Lathe. 1 1/2 X 8 TPI. Chuck measures 5" in diameter with a 2 1/4" body height. Chuck has some light marks as shown. Stamped on chuck is"THE CUSHMAN CHUCK CO. HARTFORD, CONN MADE IN UNITED STATES OF AMERICA REF NO 5340B" Comes with key. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL SOUTH BEND 9" 10K LATHE COMPOUND REST BASE SLIDE CAST
Nice- Original compound rest base cast for a 9" or 10K South Bend lathe. Condition of nut is unknown. All threaded cast holes have been checked and are in good order. This unit has provisions for mounting your milling attachment. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DUMORE TOOL POST LATHE GRINDER CAT 14-011 ATLAS SOUTH BEND LOGAN CRAFTSMAN
DUMORE Tool post grinder The Dumore Corporation. Mauston.WI USA Type 14-011 Model 8385 Volts 115 Amp 1.12 1/4" diam Arbor No Load rpm 16.000 Tool comes with extra Stones.Including a Collet for Internal grinding with two bits. LIKE NEW! Very LITTLE USE IF ANY. Comes with all parts shown on pictures. Check out my!
|
|
|
South Bend 9 10K Atlas Craftsman Lathe Threaded Face Plate TFP-100
This is a South Bend threaded face plate. 8 1/2 inches in diameter, 1 1/2- 8 threaded mount. Excellent condition, south bend part number TFP-100N. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND Heavy 10 Lathe Apron Complete 10L Great Shape!
Needs some cleaning. Otherwise all there and in good shape.
|
|
|
south bend 10"or 9" lathe carriage stop? maybe leblond lathe micrometer stop?
this micrometer stop works great smooth and tight. not sure if it is a south bend part or another company part. maybe leblond? the bottom part does not look like a oem part but will clamp on a lathe. this was with a bunch of southbend 10" parts. will not fit my 13" sb lathe. it looks like there is a#3 at the red pointer. will refund any shipping under the $15 amount. thanks
|
|
|
South Bend 9C Lathe Apron, Complete
Complete Apron for South Bend 9C Lathe In very good condition. No rust Clean stripped to bare metal. Ready for paint
|
|
|
Lead Screw and Mount Bushings for 36" South Bend 9C Lathe
36" lead screw for South Bend 9C lathe Left and right bushings included All in very good condition
|
|
|
South Bend Lathe Electric Motor Mica Undercutting Attachment
This is an armature mica undercutting lathe attachment. In good hardly used condition.i.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144aa82444c-0xf3-
|
|
|
Metal Lathe Tools 8 spanners Various Types South Bend etc
This auction is for a collection of 8 spanners( Additional search names: Spanner. Spanner Wrench, Collett Nut Spanner, Hook Pin Spanner, Hubless spanner, Pin Spanner, Collett Chuck wrench, The spanners are made by South Bend, Billings and Spencer, Billings& Spencer, J.H. Williams, JH Williams, Armstrong. 1) Billings& Spencer#1(2) Billings& Spencer#6(3) South Bend#3201NK1(4) Armstrong#34-360(5) Armstrong#34-213(6) And(7) a pair of J.H. Williams#482(8) A Stamped, but unmarked spanner. Many years ago these spanners were painted"machine grey" Remember, machinist tools that are used, do not reside in a museum, but in our tool boxes in the shop. I am retired now and am selling my no-longer-used tools. I'll try to list a few more items each week(in between my naps! I ship only to the lower 48 States. I ACCEPT PAYPAL ONLY. ... moreI EXPECT PROMPT PAYMENT. I SHIP IMMEDIATELY after receipt of a PayPal Payment. If PayPal notifies me of a Payment, on or before 3:00 PM, Eastern Standard Time, your purchase will be mailed at the Post Office before 5:00, SAME DAY. Saturdays, before 12:00, as the Post Office closes at 1:30 PM. At various times, I have been both a buyer and a seller. I believe that PROMPT PAYMENT ABSOLUTELY DESERVES PROMPT SHIPPING! None of this"seller will usually ship within 5 days after payment" stuff. You paid for it and you want it! I'm the same way. Shipping will be by USPS Priority Mail, Small Flat Rate Envelope(Box within envelope) which costs $5.60. I refuse to make so much as a penny profit on shipping costs. I dislike sellers who gouge buyers on shipping costs, and I refuse to buy from them. Experienced eBay buyers have a good understanding of what shipping actually costs. If a seller would“gouge” you on shipping costs, what else may the seller be dishonest about. My starting price is only $40.00, or $5.00 each for 8 spanners! I offer a very fair starting price, and a"Buy Now" option for those who want it right away. Those sellers who state"NO BUY NOW Butt
|
|
|
1930's SOUTH BEND LATHE MODEL 415-YA rare 9" 3 foot BED metalworking VINTAGE
1930's SOUTH BEND LATHE MODEL 415-YA rare 9" 3 foot BED metalworking VINTAGE As the warehouse clears out. We are looking to part with some machine shop tools. For your consideration: 9" Workshop Lathe South Bend Lathe Company. South Bend, Indiana Catalog#415-YA Beautiful cosmetic condition. Rare and antique. Bed length is 3" Mid to late 1930s. I believe. This item is available for pickup in Baltimore. MD. Pickup will have to be scheduled for a weekend to accomodate work schedules. Please contact me for any questions. Prior to buying. We accept paypal. Cashiers checks, or CASH. gsrx_vers_526(GS 6.6.6(526)
|
|
|
9" South Bend Lathe 3C Collet draw bar and collets
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE 9" South Bend Lathe 3C Collet draw bar and collets also included is the collet adapter good condition Check all the pictures S old AS IS. All sales final! Used the shipping calculator for shipping cost. Payment must be made within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
south bend lathe stc-100k turret, for use on 10k and 9" mounting round 1 3/8"
This is a South Bend Lathe STC-100K Turret that I have for sale. like brand new condition. this turret is to be use on south bend lathe 10k and south bend 9" lathe. The mounting round side is 1 3/8" thanks.
|
|
|
VINTAGE 1938 SOUTH BEND 9" WORKSHOP LATHE REPAIR PARTS LIST
5 DAY AUCTION! VINTAGE SOUTH BEND 9" WORKSHOP LATHE PARTS LIST 4 PGS. 1938 YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H $6.00 PRIORITY MAIL. COMBINED SHIPPING AVAILABLE. PLEASE WAIT TO TO INVOICED FOR MULTIPLE PURCHASES. INTERNATIONAL BIDDING REQUIRES APPROVAL. PHOTOCOPIES ARE NOT AVAILABLE PAYMENT EXPECTED WITHIN 3 BUSINESS DAYS OF AUCTION CLOSE SECOND-CHANCE OFFERS AVAILABLE ON SOME ITEMS
|
|
|
VINTAGE 1960s SOUTH BEND LATHE #1307 SUPER PRECISION LATHE BROCHURES *2 PCS*
5 DAY AUCTION! VINTAGE SOUTH BEND#1307 LATHE BROCHURES 2 PCS 1968 6 PAGE HEAVY PLY PAPER BROCHURE 1960s 12 PAGE BROCHURE SPECS. FEATURES, ACCESSORIES YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H $6.00 PRIORITY MAIL. COMBINED SHIPPING AVAILABLE. PLEASE WAIT TO TO INVOICED FOR MULTIPLE PURCHASES. INTERNATIONAL BIDDING REQUIRES APPROVAL. PHOTOCOPIES ARE NOT AVAILABLE PAYMENT EXPECTED WITHIN 3 BUSINESS DAYS OF AUCTION CLOSE SECOND-CHANCE OFFERS AVAILABLE ON SOME ITEMS
|
|
|
VINTAGE 1947 SOUTH BEND HOW TO RUN A LATHE MANUAL BOOK 128 PAGE MACHINIST
DESCRIPTION: USED. SOUTH BEND MANUAL. THERE IS WRITING ON THE COVER AND INTERIOR PAGE. THE REST OF THE BOOK LOOKS FINE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS ... moreIN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AN
|
|
|
Jacobs Chuck No 20N 3/8 to 1 South Bend Lathe Bridgeport Mill Machinist Tool
Up for auction is a Jacobs ball bearing super chuck No. 20N. It has a 3/8 to 1 inch capacity. It is a seriously well made heavy duty monster. It works like new. With the right adapter this should work on just about any drill press. Lathe or milling machine. If you would like to come out and take a look at this you are welcome to. It is in Chardon. Ohio 44024 Will gladly combine shipping for winners of more than one auction. Or you are welcome to come out and pick this up. Check out my other auctions for more tools and other interesting items. Bid with confidence. Check our feedback. Good luck and happy bidding.
|
|
|
MINT Jacobs USA 3/8" cap BALL BEARING SUPER CHUCK 2MT for South Bend Lathe $208
This sale is for ONE MINT Jacobs made INDUSTRIAL HEAVY DUTY BALL BEARING SUPER CHUCK. No. 11N2JT. This chuck has an overall length of 6-1/4" with a#2 Morse Taper shank. The three jaw capacity is 0-3/8" or 0-10mm. A key is not included in this sale. This chuck features a ball bearing construction for added gripping force and helps to center drills for more accurate drilling. Please note that ther are a few faint scratches and minute staining(see photos) This high quality USA made CHUCK is being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. ... moreMachinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated w
|
|
|
South bend 9 or 10K Lathe V- Belt Headstock Conversion Pulleys USED
South bend 9 or 10K Lathe V- Belt Conversion Pulleys USED Includes both headstock and countershaft pulleys. I will combine shipping on multiple purchase- and will invoice at end of auction.
|
|
|
9" & 10"K South Bend Lathe Parts List & Other Data / 26 pages Of exploded veiws
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! High Quality reproduction of Parts list for South Bend 9& 10"K lathes.Has 26 pages of Exploded views of each assembly with part numbers. Maintenance info and types of lubricants to use. It also contains info on how to set up the lathe to cut 27 TPI threads. LOADED with valuable Info.
|
|
|
1941 AD: South Bend Lathe Works Precision Speed Versatility Industrial Machines
1941 AD: South Bend Lathe Works Precision Speed Versatility Industrial Machines This listing is for an original Magazine Print Advertisement Condition Graded: Near Fine. Ad measures approximately 11 x 13.75 inches. Shipped Flat i n Clear Archival Sleeve and Sturdy Cardboard Mailer Additional Prints. Ads or Articles, Same Package, FREE SHIPPING Included with your item is a Certificate of Provenance detailing its original source& date of publication. This small. Elegant certificate is suitable for attaching to the rear of your picture frame, to accompany your gift or to include in your collection. Archive or historical reference. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ All our Print Ads. Prints& Historical Articles are guaranteed original items rescued from period magazines, trade journals, books, catalogs etc. Never a photocopy ... moreor reproduction. ~~~~~~~~~~~~~~~~~~~~ Our vintage print ads are strictly graded for condition and are ideal for framing. Gifts, collecting, archiving and historical reference. 030-18
|
|
|
South Bend Lathe Grinder Shaper Mill Milling Machine Plaster Models Plasto Mfg.
South Bend Lathe. Grinder, Shaper and Milling Machine plaster models. Made by Plasto Mfg. Co. for South Bend Lathe. These models were sold or rented to schools and businesses to plan their machine shops. These are rare because they are made of plaster. Few survived. Some loss of plaster and paint on the models. Please wait for invoice for correct shipping total. Ebay's calculator is not always accurate. Shipping includes insurance if needed. If you have any questions. Please ask, all emails will be answered. Please study the pictures and description for condition. There are no refunds or returns unless there is an error in the listing. PayPal only. Payment due within 3 days of close of auction. No international shipping. Shipping to 48 states only. If you have any problems with your purchase. Please email before leaving feedback. I will ... moregladly take care of any problems. Thanks.
|
|
|
Original South Bend 9" 10K Lathe Compound Rest Shoe
This compound rest shoe came off of my South Bend 9" model C lathe.
|
|
|
VERY NICE ORIGINAL SOUTH BEND 9" 10K LATHE 2 STEP MOTOR PULLEY 5/8" BORE
Very Nice Original Two Step Motor Pulley for a 9" 10K South Bend Lathe. Bore Measures 3/4" with a 1/8" keyway. Smaller pulley measures 2 1/16" diameter and larger pulley measures 3 3/8" diameter. Set screw is present. Key is included. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND 9" 10K LATHE COUNTERSHAFT TENSIONER ADJUSTING RODS TURNBUCKEL LEVER
Nice Original South Bend 9" 10K Lathe Countershaft Tensioner Adjusting Rods. Turnbuckle and Lever Assembly. Includes Turnbuckle PT1948N1, L. H Rod PT395N1, R. H Rod PT1946K1-G, Cotter Pin 170 X 206, Pin PT1949NK3 and Countershaft Lever PT945N1. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144af366b29-0x106-
|
|
|
ORIGINAL ARMSTRONG NO 2010-L TOOL HOLER FOR ATLAS CRAFTSMAN SOUTH BEND LATHE
Original Armstrong No 2010-L Cut Off Tool Holder for an Atlas. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL JH WILLIAMS NO 2010R TOOL HOLER 4 ATLAS CRAFTSMAN SOUTH BEND LATHE
Nice Original JH Williams 2010R Turning Tool Holder for an Atlas. Craftsman or South Bend Metal Lathe. Unit is marked"2010R TURNING-TOOL HOLDER" on one side and"J.H. WILLIAMS& CO DROP-FORGED IN USA" Measures 13/16" high, 5/8" wide and has a 3 3/4" shank. Will also except a 1/4" tool bit. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 28 5/16" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
Nice Lot of 28 5/16" Cutting Tool Bits for an Atlas. Craftsman, South Bend or Logan Metal Lathe. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND LATHE G-26T END GEAR COVER w/ RAISED LETTERING INDUSTRIAL STEAMPUNK
South Bend Lathe G-26T End Gear Cover Only includes what is pictured. We were hired by a local school district to sell this for them. It was recently removed from a horizontal lathe. The metal is not attracted to a magnet. It has many scratches. Nicks and some paint loss from use, but there are no dents or unintended holes. The larger hole near the top is 2 3/4 inches across. And the bolt holes are 3/8 of an inch across. Overall it measures about 20 1/2 inches across at the base. About 19 5/8 inches tall and about 3 1/2 inches wide. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to ... moreyou for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. For international winning bidders. Including Canada. I will only accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MEEHANITE D1-4 8" METAL LATHE 3-JAW AUTO STRONG CHUCK off SOUTH BEND G-26T
Meehanite D1-4 8 Inch Diameter Metal Lathe Camlock Chuck pulled from a South Bend Lathe Model G-26T Only includes what is pictured. We were hired by a local school district to sell this for them. It was recently removed from a lathe. It has many scratches. Nicks and wear from use. The center hole is 2 1/2 inches across and the studs are 1 1/4 inches tall. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to you for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. For international winning bidders. Including Canada. ... moreI will only accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BTC 7 3/4" METAL LATHE 4-JAW CHUCK off SOUTH BEND G-26T
BTC 7 3/4 Inch Diameter Metal Lathe Camlock Chuck pulled from a South Bend Lathe Model G-26T Only includes what is pictured. We were hired by a local school district to sell this for them. It was recently removed from a lathe. It has many scratches. Nicks and wear from use. The center hole is 2 1/4 inches across and the studs are 1 3/16 inches tall. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to you for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. For international winning bidders. Including Canada. I will ... moreonly accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
8" DIAMETER CAMLOCK METAL LATHE FACE PLATE 2 3/8" BORE HOLE off SOUTH BEND G-26T
8 Inch Diameter Metal Lathe Camlock face Plate pulled from a South Bend Lathe Model G-26T Only includes what is pictured. We were hired by a local school district to sell this for them. It was recently removed from a lathe. It has many scratches. Nicks and wear from use. The center hole is 2 3/8 inches across and the studs are 1 3/16 inches tall. We tried to take pictures of the important features. But we are not experts on these so feel free to contact if you have any questions. Check out my other items for more items of collectible interest! Free local pickup is available by appointment. You can pay to have it shipped to you. Or we can deliver it to you for $2.00 per mile with a $10.00 minimum charge from Erie. PA 16506. Please call me at 814.882.6830 if you have any questions. For international winning bidders. Including Canada. I will ... moreonly accept PayPal. Check out my other items for more items of collectible interest. Thank you and Good Luck! Sign up for my weekly email newsletters so you can regularly see what items I have ending that week. Be sure to add me to your favorites list so you can view my items easily in the future. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
JACOBS 30B 5/16" Drill Chuck w Taper for Atlas Craftsman South Bend Logan Lathe
Vintage Jacobs 30B 0-5/16" Drill Chuck Great for YOUR Vintage Machine Shop Set-Up. Made in the USA. Up for offer is a nice Vintage Jacobs 30B Drill Chuck with Taper. Capacity is marked 0- 5/16" Also marked THD 1/2" x 20. Condition is very nice overall as shown in photos. Chuck opens and closes nicely. Has some normal wear marks from use and storage. Seems to be a MT1 taper. Not abused. Auction includes only what is shown in photos. No box or paperwork. Overall. This looks to be a great chuck for your lathe, drill press or for whatever purpose you choose to use it. These great old chucks are Made in the USA. Not China. Get this one while you can. Items generally ship within 1 business day via USPS with tracking information uploaded via Ebay upon shipping. 14 day returns allowed(see details below) Please Read Before Bidding or ... moreBuying I have represented this item to the best of my limited ability. Buyers responsibility to examine all photos wih care and read description fully. Please ask any questions before bidding or buying. Buyers responsibility to determine condition. Completeness, fitment, use, usability, function and collectability before bidding or buying. As this is a pre-owned item it may have imperfections both mechanical and/or physical that were either not noticed or deemed insignificant due to it's vintage status. Please ask any questions before bidding or buying. No price adjustments on items after sale. USA SALES ONLY NO EXCEPTIONS NO FOREIGN SALES PAYPAL ONLY NO EXCEPTIONS PAYMENT DUE WITHIN 2 BUSINESS DAYS ITEM GENERALLY SHIPS WITHIN 1 BUSINESS DAY OF PAYMENT ITEM SHIPS VIA USPS WITH DELIVERY CONFIRMATION SHIPPING FEE REFLECTS POSTAGE. DELIVERY CONFIRMATION, INSURANCE IF INCLUDED AND PACKAGING SUPPLIES 14 DAY RETURN POLICY UNLESS OTHERWISE NOTED IN LISTING(SEE DETAILS BELOW) RETURN POLICY PLEASE REVIEW THE EBAY RETURN POLICY FOR BUYERS TO DETERMINE IF YOUR ITEM MEETS THE REQUIREMENTS FOR RETURN STATUS. ANY BUYER TRYING TO MANIPULATE THE EBAY RETURN SYSTEM OR DEEMED TO BE USING UN
|
|
|
SOUTH BEND 9" LATHE ROCKER LANTERN TOOL POST WITH 3/8 WRENCH
For your consideration: 1 South Bend 9" lathe rocker- lantern tool post with 3/8" wrench. This tool post is in very good condition. The 3/8" head adjusting screw moves freely and is not mushroomed. It is easily removable from the tool. The rectangular bottom holding base dimensions are 1-3/8" x 1-1/4" the tool bit opening slot is 2" x 7/16" The lantern body of the tool height 3" The 3/8" wrench is a Williams. Free shipping in the USA. Thank you for looking. G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144b1de676b-0xfc-
|
|
|
metal lathe chuck back plate,south bend lathe,back plate 2-1/4"-6
Chuck back plate threaded 2-1/4"6.Diameter is 6-11/16 Posted with
|
|
|
South Bend Model A 9" Lathe Rear Saddle Gib & Bolts - Part 61
South Bend Model A 9" Lathe Rear Saddle Gib& Bolts- Part 61 This listing is for a South Bend Model A 9" Lathe Rear Saddle Gib& Bolts- Part 61. In good condition as seen in the photos. Mounting bolts are included. Check my other listings under" South Bend Lathe Parts" for more from this lathe! I am happy to combine shipping to save you money-just let me invoice you before you pay. $5.95 Flat Rate Shipping anywhere in the USA or territories. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave ... morefeedback as soon as the buyer does!
|
|
|
South Bend Model A 9" Lathe Cross Feed Ball Crank & Handle - Part 276
South Bend Model A 9" Lathe Cross Feed Ball Crank& Handle- Part 276 This listing is for a South Bend Model A 9" Lathe Cross Feed Ball Crank& Handle- Part 276. In good condition as seen in the photos. It measures 2 1/2" from end to end and the bore is 5/16" Check my other listings under" South Bend Lathe Parts" for more from this lathe! I am happy to combine shipping to save you money-just let me invoice you before you pay. $2.95 First Class Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden ... morethem down with more of it, but I leave feedback as soon as the buyer does! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144b2c52f07-0xf7-
|
|
|
South Bend Model A 9" Lathe Compound Rest Base Gib & 5 Screws #221
South Bend Model A 9" Lathe Compound Rest Base Gib& 5 Screws#221 This listing is for a South Bend Model A 9" Lathe Compound Rest Base Gib& 5 Screws#221. In good condition as seen in the photos. Check my other listings under" South Bend Lathe Parts" for more from this lathe! I am happy to combine shipping to save you money-just let me invoice you before you pay. $3.95 Flat Rate Shipping anywhere in the USA or territories. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as ... morethe buyer does!
|
|
|
South Bend Model A 9" Lathe Headstock Back Gear Assembly & Screws - 361N1
South Bend Model A 9" Lathe Headstock Back Gear Assembly& Screws Part 361N1 This listing is for a South Bend Model A 9" Lathe Headstock Back Gear Assembly& Screws- 361N1. In good condition as seen in the photos. The taper pin was in tight and I marred the surface a little removing it- I burnished it(see last two photos) so it works fine but the pin is just a little shorter because of this. Check my other listings under" South Bend Lathe Parts" for more from this lathe! I am happy to combine shipping to save you money-just let me invoice you before you pay. $8.95 Priority Shipping anywhere in the lower 48 states. Or $11.95 in the rest of the USA or territories. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. ... moreIf a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
|
|
|
South Bend Early 13" Lathe Headstock Spindle Cone Gear
Removed from an Early 1926 South Bend 13" lathe. Good Gear. 25 tooth, 1.650" ID, four pulley steps 3.185" 4.350" 5.540" 6.700" ODs, Comes as shown.
|
|
|
South Bend Lathe 9" Apron Mount Screw, mounts apron to saddle
This is one apron mounting bolt off of a South Bend 9" model C lathe. But it will fit other models. The bolt is 16 TPI.
|
|
|
NICE ORIGINAL SOUTH BEND 9" METAL LATHE 72/18 TOOTH COMPOUND idler GEAR
here is a 72/18 gear for south bend 9" lathe this gear does not come with a bushing you can use your own from your current idler gear. there is the slightest bit of wear where the bushing rides inside the gear but it never effected performance or cause any noise or wear and gears. I can see the slightest bit of wear on the 18 tooth portion but again doesn't affect performance or function at all its so slight I would not be able to get it to show on a photo. this gear will serve you well for many years to come. check my other auctions for more gears full set. I will combine shipping lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144b59d31d9-0xfc-
|
|
|
Vintage South Bend Lathe, Stand, 3/4 HP motor, spare gears, parts, HAS NO CHUCK
Vintage South Bend Lathe with stand. 3/4 HP motor. Spare set of gears, and parts. HAS NO CHUCK. Small Grinder included. I have more pictures of this than these 12. If interested.
|
|
|
Lot 2 Lathe 1/2 3/8 drill chuck 1 Morse Atlas Logan South Bend 109 Craftsman
Lot of 2 Lathe tailstock number 1 Morse Taper Ready to Recycle your old burned out Electric hand drill Chucks for use on your Lathe. 1/2 inch 20 Treads per Inch and 3/8 inch 24 Threads per Inch drill chucks. 1 Morse Atlas Logan South Bend 109 Craftsman Morse number 1. May be a Little Scratched and slight rust but functional like New. Ready to use and give years more of service. Thanks for Looking.
|
|
|
MACHINIST TOOLS LATHE MILL NICE 5C Collet Sleeve for South Bend Lathe
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. 61/64,755,33/64,1 1/16,318,25/32,35/64,2964,3/16& 255. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping ... morerates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
|
|
 |